API tools faq
paste
Advertisement
Guest User

Untitled

a guest
Jun 25th, 2017
108
0
Never
Add comment
Not a member of Pastebin yet? Sign Up, it unlocks many cool features!
text 31.10 KB | None | 0 0
raw download clone embed print report
  1. rabg@rabg:~$ dmesg
  2. BOOTMEM
  3. [ 0.000000] #42 [0001ad3800 - 0001af3800] BOOTMEM
  4. [ 0.000000] #43 [0001d0f000 - 0001f8396c] BOOTMEM
  5. [ 0.000000] Initializing HighMem for node 0 (00000000:00000000)
  6. [ 0.000000] Memory: 491120k/514944k available (3943k kernel code, 23432k reserved, 2036k data, 400k init, 0k highmem)
  7. [ 0.000000] virtual kernel memory layout:
  8. [ 0.000000] fixmap : 0xfff1d000 - 0xfffff000 ( 904 kB)
  9. [ 0.000000] pkmap : 0xffc00000 - 0xffe00000 (2048 kB)
  10. [ 0.000000] vmalloc : 0xdfee0000 - 0xffbfe000 ( 509 MB)
  11. [ 0.000000] lowmem : 0xc0000000 - 0xdf6e0000 ( 502 MB)
  12. [ 0.000000] .init : 0xc15d7000 - 0xc163b000 ( 400 kB)
  13. [ 0.000000] .data : 0xc13d9df2 - 0xc15d6fd0 (2036 kB)
  14. [ 0.000000] .text : 0xc1000000 - 0xc13d9df2 (3943 kB)
  15. [ 0.000000] Checking if this processor honours the WP bit even in supervisor mode...Ok.
  16. [ 0.000000] SLUB: Genslabs=13, HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1
  17. [ 0.000000] Hierarchical RCU implementation.
  18. [ 0.000000] NR_IRQS:512
  19. [ 0.000000] CPU 0 irqstacks, hard=c1c00000 soft=c1c01000
  20. [ 0.000000] Console: colour dummy device 80x25
  21. [ 0.000000] console [tty0] enabled
  22. [ 0.000000] Fast TSC calibration using PIT
  23. [ 0.000000] Detected 1696.523 MHz processor.
  24. [ 0.001005] Calibrating delay loop (skipped), value calculated using timer frequency.. 3393.04 BogoMIPS (lpj=1696523)
  25. [ 0.001036] Security Framework initialized
  26. [ 0.001047] SELinux: Disabled at boot.
  27. [ 0.001065] Mount-cache hash table entries: 512
  28. [ 0.002020] Initializing cgroup subsys ns
  29. [ 0.002029] Initializing cgroup subsys memory
  30. [ 0.002044] Initializing cgroup subsys devices
  31. [ 0.002050] Initializing cgroup subsys freezer
  32. [ 0.002056] Initializing cgroup subsys blkio
  33. [ 0.002098] Performance Events: p6 PMU driver.
  34. [ 0.002107] ... version: 0
  35. [ 0.002113] ... bit width: 32
  36. [ 0.002118] ... generic registers: 2
  37. [ 0.002123] ... value mask: 00000000ffffffff
  38. [ 0.002130] ... max period: 000000007fffffff
  39. [ 0.002135] ... fixed-purpose events: 0
  40. [ 0.002140] ... event mask: 0000000000000003
  41. [ 0.002149] Checking 'hlt' instruction... OK.
  42. [ 0.006433] SMP alternatives: switching to UP code
  43. [ 0.014968] ACPI: Core revision 20100121
  44. [ 0.026049] Enabling APIC mode: Flat. Using 1 I/O APICs
  45. [ 0.026399] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
  46. [ 0.036718] CPU0: Intel(R) Pentium(R) M processor 1.70GHz stepping 08
  47. [ 0.036999] Brought up 1 CPUs
  48. [ 0.036999] Total of 1 processors activated (3393.04 BogoMIPS).
  49. [ 0.036999] regulator: core version 0.5
  50. [ 0.036999] NET: Registered protocol family 16
  51. [ 0.037024] ACPI: bus type pci registered
  52. [ 0.037168] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
  53. [ 0.037180] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in E820
  54. [ 0.037187] PCI: Using MMCONFIG for extended config space
  55. [ 0.037193] PCI: Using configuration type 1 for base access
  56. [ 0.039401] bio: create slab <bio-0> at 0
  57. [ 0.040696] ACPI: EC: Look up EC in DSDT
  58. [ 0.044124] ACPI: Interpreter enabled
  59. [ 0.044147] ACPI: (supports S0 S3 S4 S5)
  60. [ 0.044177] ACPI: Using IOAPIC for interrupt routing
  61. [ 0.053088] ACPI: EC: GPE = 0x1c, I/O: command/status = 0x66, data = 0x62
  62. [ 0.053380] ACPI: No dock devices found.
  63. [ 0.053388] PCI: Ignoring host bridge windows from ACPI; if necessary, use "pci=use_crs" and report a bug
  64. [ 0.054097] ACPI: PCI Root Bridge [PCI0] (0000:00)
  65. [ 0.055465] pci_root PNP0A08:00: host bridge window [io 0x0000-0x0cf7] (ignored)
  66. [ 0.055469] pci_root PNP0A08:00: host bridge window [io 0x0d00-0xffff] (ignored)
  67. [ 0.055473] pci_root PNP0A08:00: host bridge window [mem 0x000a0000-0x000bffff] (ignored)
  68. [ 0.055477] pci_root PNP0A08:00: host bridge window [mem 0x000d4000-0x000d7fff] (ignored)
  69. [ 0.055480] pci_root PNP0A08:00: host bridge window [mem 0x000d8000-0x000dbfff] (ignored)
  70. [ 0.055484] pci_root PNP0A08:00: host bridge window [mem 0x20000000-0xfebfffff] (ignored)
  71. [ 0.055554] pci 0000:00:02.0: reg 10: [mem 0xb0080000-0xb00fffff]
  72. [ 0.055559] pci 0000:00:02.0: reg 14: [io 0x1800-0x1807]
  73. [ 0.055565] pci 0000:00:02.0: reg 18: [mem 0xc0000000-0xcfffffff pref]
  74. [ 0.055571] pci 0000:00:02.0: reg 1c: [mem 0xb0000000-0xb003ffff]
  75. [ 0.055606] pci 0000:00:02.1: reg 10: [mem 0x00000000-0x0007ffff]
  76. [ 0.055714] pci 0000:00:1d.0: reg 20: [io 0x1820-0x183f]
  77. [ 0.055775] pci 0000:00:1d.1: reg 20: [io 0x1840-0x185f]
  78. [ 0.055836] pci 0000:00:1d.2: reg 20: [io 0x1860-0x187f]
  79. [ 0.055896] pci 0000:00:1d.3: reg 20: [io 0x1880-0x189f]
  80. [ 0.055955] pci 0000:00:1d.7: reg 10: [mem 0xb0040000-0xb00403ff]
  81. [ 0.056023] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
  82. [ 0.056029] pci 0000:00:1d.7: PME# disabled
  83. [ 0.056124] pci 0000:00:1e.2: reg 10: [io 0x1c00-0x1cff]
  84. [ 0.056132] pci 0000:00:1e.2: reg 14: [io 0x18c0-0x18ff]
  85. [ 0.056140] pci 0000:00:1e.2: reg 18: [mem 0xb0040800-0xb00409ff]
  86. [ 0.056148] pci 0000:00:1e.2: reg 1c: [mem 0xb0040400-0xb00404ff]
  87. [ 0.056183] pci 0000:00:1e.2: PME# supported from D0 D3hot D3cold
  88. [ 0.056189] pci 0000:00:1e.2: PME# disabled
  89. [ 0.056220] pci 0000:00:1e.3: reg 10: [io 0x2400-0x24ff]
  90. [ 0.056228] pci 0000:00:1e.3: reg 14: [io 0x2000-0x207f]
  91. [ 0.056273] pci 0000:00:1e.3: PME# supported from D0 D3hot D3cold
  92. [ 0.056278] pci 0000:00:1e.3: PME# disabled
  93. [ 0.056358] pci 0000:00:1f.0: Force enabled HPET at 0xfed00000
  94. [ 0.056367] pci 0000:00:1f.0: quirk: [io 0x1000-0x107f] claimed by ICH6 ACPI/GPIO/TCO
  95. [ 0.056379] pci 0000:00:1f.0: quirk: [io 0x1180-0x11bf] claimed by ICH6 GPIO
  96. [ 0.056415] pci 0000:00:1f.1: reg 10: [io 0x0000-0x0007]
  97. [ 0.056423] pci 0000:00:1f.1: reg 14: [io 0x0000-0x0003]
  98. [ 0.056432] pci 0000:00:1f.1: reg 18: [io 0x0000-0x0007]
  99. [ 0.056440] pci 0000:00:1f.1: reg 1c: [io 0x0000-0x0003]
  100. [ 0.056448] pci 0000:00:1f.1: reg 20: [io 0x1810-0x181f]
  101. [ 0.056520] pci 0000:00:1f.3: reg 20: [io 0x20a0-0x20bf]
  102. [ 0.056606] pci 0000:06:00.0: reg 10: [io 0x3000-0x30ff]
  103. [ 0.056615] pci 0000:06:00.0: reg 14: [mem 0xb0108000-0xb01080ff]
  104. [ 0.056669] pci 0000:06:00.0: supports D1 D2
  105. [ 0.056672] pci 0000:06:00.0: PME# supported from D1 D2 D3hot D3cold
  106. [ 0.056678] pci 0000:06:00.0: PME# disabled
  107. [ 0.056714] pci 0000:06:06.0: reg 10: [mem 0xb0104000-0xb0105fff]
  108. [ 0.056796] pci 0000:06:09.0: reg 10: [mem 0x00000000-0x00000fff]
  109. [ 0.056821] pci 0000:06:09.0: supports D1 D2
  110. [ 0.056824] pci 0000:06:09.0: PME# supported from D0 D1 D2 D3hot D3cold
  111. [ 0.056830] pci 0000:06:09.0: PME# disabled
  112. [ 0.056869] pci 0000:06:09.2: reg 10: [mem 0xb0108800-0xb0108fff]
  113. [ 0.056878] pci 0000:06:09.2: reg 14: [mem 0xb0100000-0xb0103fff]
  114. [ 0.056936] pci 0000:06:09.2: supports D1 D2
  115. [ 0.056939] pci 0000:06:09.2: PME# supported from D0 D1 D2 D3hot
  116. [ 0.056944] pci 0000:06:09.2: PME# disabled
  117. [ 0.056981] pci 0000:06:09.3: reg 10: [mem 0xb0106000-0xb0107fff]
  118. [ 0.057046] pci 0000:06:09.3: supports D1 D2
  119. [ 0.057049] pci 0000:06:09.3: PME# supported from D0 D1 D2 D3hot
  120. [ 0.057055] pci 0000:06:09.3: PME# disabled
  121. [ 0.057092] pci 0000:06:09.4: reg 10: [mem 0xb0109400-0xb01094ff]
  122. [ 0.057101] pci 0000:06:09.4: reg 14: [mem 0xb0109000-0xb01090ff]
  123. [ 0.057110] pci 0000:06:09.4: reg 18: [mem 0xb0108400-0xb01084ff]
  124. [ 0.057159] pci 0000:06:09.4: supports D1 D2
  125. [ 0.057162] pci 0000:06:09.4: PME# supported from D0 D1 D2 D3hot
  126. [ 0.057167] pci 0000:06:09.4: PME# disabled
  127. [ 0.057215] pci 0000:00:1e.0: PCI bridge to [bus 06-06] (subtractive decode)
  128. [ 0.057226] pci 0000:00:1e.0: bridge window [io 0x3000-0x3fff]
  129. [ 0.057232] pci 0000:00:1e.0: bridge window [mem 0xb0100000-0xb01fffff]
  130. [ 0.057240] pci 0000:00:1e.0: bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
  131. [ 0.057243] pci 0000:00:1e.0: bridge window [io 0x0000-0xffff] (subtractive decode)
  132. [ 0.057247] pci 0000:00:1e.0: bridge window [mem 0x00000000-0xffffffffffffffff] (subtractive decode)
  133. [ 0.057296] pci_bus 0000:07: [bus 07-0a] partially hidden behind transparent bridge 0000:06 [bus 06-06]
  134. [ 0.057315] pci_bus 0000:00: on NUMA node 0
  135. [ 0.057320] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
  136. [ 0.057618] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCIB._PRT]
  137. [ 0.063676] ACPI: PCI Interrupt Link [LNKA] (IRQs *10)
  138. [ 0.063814] ACPI: PCI Interrupt Link [LNKB] (IRQs *5)
  139. [ 0.063948] ACPI: PCI Interrupt Link [LNKC] (IRQs *4)
  140. [ 0.064095] ACPI: PCI Interrupt Link [LNKD] (IRQs *3)
  141. [ 0.064230] ACPI: PCI Interrupt Link [LNKE] (IRQs *11)
  142. [ 0.064364] ACPI: PCI Interrupt Link [LNKF] (IRQs 3) *0, disabled.
  143. [ 0.064500] ACPI: PCI Interrupt Link [LNKG] (IRQs *4)
  144. [ 0.064634] ACPI: PCI Interrupt Link [LNKH] (IRQs *3)
  145. [ 0.064831] vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none
  146. [ 0.064850] vgaarb: loaded
  147. [ 0.065229] SCSI subsystem initialized
  148. [ 0.065263] libata version 3.00 loaded.
  149. [ 0.065494] PCI: Using ACPI for IRQ routing
  150. [ 0.065501] PCI: pci_cache_line_size set to 64 bytes
  151. [ 0.065592] reserve RAM buffer: 000000000009f800 - 000000000009ffff
  152. [ 0.065596] reserve RAM buffer: 000000001f6e0000 - 000000001fffffff
  153. [ 0.065735] NetLabel: Initializing
  154. [ 0.065741] NetLabel: domain hash size = 128
  155. [ 0.065746] NetLabel: protocols = UNLABELED CIPSOv4
  156. [ 0.065765] NetLabel: unlabeled traffic allowed by default
  157. [ 0.065904] hpet clockevent registered
  158. [ 0.065909] HPET: 3 timers in total, 0 timers will be used for per-cpu timer
  159. [ 0.065921] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
  160. [ 0.065932] hpet0: 3 comparators, 64-bit 14.318180 MHz counter
  161. [ 0.068054] Switching to clocksource tsc
  162. [ 0.069049] pnp: PnP ACPI init
  163. [ 0.069061] ACPI: bus type pnp registered
  164. [ 0.072476] pnp: PnP ACPI: found 10 devices
  165. [ 0.072483] ACPI: ACPI bus type pnp unregistered
  166. [ 0.072490] PnPBIOS: Disabled by ACPI PNP
  167. [ 0.072504] system 00:01: [mem 0xe0000000-0xefffffff] has been reserved
  168. [ 0.072513] system 00:01: [mem 0xf0000000-0xf0003fff] has been reserved
  169. [ 0.072521] system 00:01: [mem 0xf0004000-0xf0004fff] has been reserved
  170. [ 0.072529] system 00:01: [mem 0xf0005000-0xf0005fff] has been reserved
  171. [ 0.072537] system 00:01: [mem 0xf0008000-0xf000bfff] has been reserved
  172. [ 0.072545] system 00:01: [mem 0xfed20000-0xfed8ffff] has been reserved
  173. [ 0.072557] system 00:06: [io 0x0680-0x06ff] has been reserved
  174. [ 0.072565] system 00:06: [io 0x0800-0x080f] has been reserved
  175. [ 0.072572] system 00:06: [io 0x1000-0x107f] has been reserved
  176. [ 0.072580] system 00:06: [io 0x1180-0x11bf] has been reserved
  177. [ 0.072588] system 00:06: [io 0x1640-0x164f] has been reserved
  178. [ 0.072595] system 00:06: [io 0xfe00] has been reserved
  179. [ 0.107576] pci 0000:00:1e.0: BAR 15: assigned [mem 0x20000000-0x23ffffff pref]
  180. [ 0.107587] pci 0000:00:02.1: BAR 0: assigned [mem 0x24000000-0x2407ffff]
  181. [ 0.107598] pci 0000:00:02.1: BAR 0: set to [mem 0x24000000-0x2407ffff] (PCI address [0x24000000-0x2407ffff]
  182. [ 0.107611] pci 0000:06:09.0: BAR 15: assigned [mem 0x20000000-0x23ffffff pref]
  183. [ 0.107622] pci 0000:06:09.0: BAR 16: assigned [mem 0x28000000-0x2bffffff]
  184. [ 0.107630] pci 0000:06:09.0: BAR 0: assigned [mem 0xb010a000-0xb010afff]
  185. [ 0.107642] pci 0000:06:09.0: BAR 0: set to [mem 0xb010a000-0xb010afff] (PCI address [0xb010a000-0xb010afff]
  186. [ 0.107653] pci 0000:06:09.0: BAR 13: assigned [io 0x3400-0x34ff]
  187. [ 0.107661] pci 0000:06:09.0: BAR 14: assigned [io 0x3800-0x38ff]
  188. [ 0.107669] pci 0000:06:09.0: CardBus bridge to [bus 07-0a]
  189. [ 0.107676] pci 0000:06:09.0: bridge window [io 0x3400-0x34ff]
  190. [ 0.107686] pci 0000:06:09.0: bridge window [io 0x3800-0x38ff]
  191. [ 0.107697] pci 0000:06:09.0: bridge window [mem 0x20000000-0x23ffffff pref]
  192. [ 0.107709] pci 0000:06:09.0: bridge window [mem 0x28000000-0x2bffffff]
  193. [ 0.107719] pci 0000:00:1e.0: PCI bridge to [bus 06-06]
  194. [ 0.107727] pci 0000:00:1e.0: bridge window [io 0x3000-0x3fff]
  195. [ 0.107738] pci 0000:00:1e.0: bridge window [mem 0xb0100000-0xb01fffff]
  196. [ 0.107749] pci 0000:00:1e.0: bridge window [mem 0x20000000-0x23ffffff pref]
  197. [ 0.107771] pci 0000:00:1e.0: setting latency timer to 64
  198. [ 0.107787] pci 0000:06:09.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20
  199. [ 0.107799] pci_bus 0000:00: resource 0 [io 0x0000-0xffff]
  200. [ 0.107802] pci_bus 0000:00: resource 1 [mem 0x00000000-0xffffffffffffffff]
  201. [ 0.107805] pci_bus 0000:06: resource 0 [io 0x3000-0x3fff]
  202. [ 0.107809] pci_bus 0000:06: resource 1 [mem 0xb0100000-0xb01fffff]
  203. [ 0.107812] pci_bus 0000:06: resource 2 [mem 0x20000000-0x23ffffff pref]
  204. [ 0.107815] pci_bus 0000:06: resource 4 [io 0x0000-0xffff]
  205. [ 0.107818] pci_bus 0000:06: resource 5 [mem 0x00000000-0xffffffffffffffff]
  206. [ 0.107821] pci_bus 0000:07: resource 0 [io 0x3400-0x34ff]
  207. [ 0.107824] pci_bus 0000:07: resource 1 [io 0x3800-0x38ff]
  208. [ 0.107828] pci_bus 0000:07: resource 2 [mem 0x20000000-0x23ffffff pref]
  209. [ 0.107831] pci_bus 0000:07: resource 3 [mem 0x28000000-0x2bffffff]
  210. [ 0.107859] NET: Registered protocol family 2
  211. [ 0.107941] IP route cache hash table entries: 4096 (order: 2, 16384 bytes)
  212. [ 0.108178] TCP established hash table entries: 16384 (order: 5, 131072 bytes)
  213. [ 0.108294] TCP bind hash table entries: 16384 (order: 5, 131072 bytes)
  214. [ 0.108407] TCP: Hash tables configured (established 16384 bind 16384)
  215. [ 0.108415] TCP reno registered
  216. [ 0.108421] UDP hash table entries: 256 (order: 1, 8192 bytes)
  217. [ 0.108434] UDP-Lite hash table entries: 256 (order: 1, 8192 bytes)
  218. [ 0.108526] NET: Registered protocol family 1
  219. [ 0.108547] pci 0000:00:02.0: Boot video device
  220. [ 0.108663] PCI: CLS 32 bytes, default 64
  221. [ 0.108712] Trying to unpack rootfs image as initramfs...
  222. [ 0.502649] Freeing initrd memory: 9552k freed
  223. [ 0.513038] Simple Boot Flag at 0x36 set to 0x1
  224. [ 0.513542] audit: initializing netlink socket (disabled)
  225. [ 0.513568] type=2000 audit(1289064756.512:1): initialized
  226. [ 0.513759] HugeTLB registered 2 MB page size, pre-allocated 0 pages
  227. [ 0.517062] VFS: Disk quotas dquot_6.5.2
  228. [ 0.517228] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
  229. [ 0.518309] NTFS driver 2.1.29 [Flags: R/O].
  230. [ 0.518626] JFS: nTxBlock = 3911, nTxLock = 31292
  231. [ 0.522329] SGI XFS with ACLs, security attributes, realtime, large block/inode numbers, no debug enabled
  232. [ 0.525879] SGI XFS Quota Management subsystem
  233. [ 0.526243] Btrfs loaded
  234. [ 0.526256] msgmni has been set to 977
  235. [ 0.528497] alg: No test for stdrng (krng)
  236. [ 0.528710] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 254)
  237. [ 0.528722] io scheduler noop registered
  238. [ 0.528811] io scheduler cfq registered (default)
  239. [ 0.529578] vesafb: framebuffer at 0xc0000000, mapped to 0xe0280000, using 3072k, total 7872k
  240. [ 0.529590] vesafb: mode is 1024x768x16, linelength=2048, pages=4
  241. [ 0.529597] vesafb: scrolling: redraw
  242. [ 0.529603] vesafb: Truecolor: size=0:5:6:5, shift=0:11:5:0
  243. [ 0.550012] Console: switching to colour frame buffer device 128x48
  244. [ 0.569745] fb0: VESA VGA frame buffer device
  245. [ 0.570023] isapnp: Scanning for PnP cards...
  246. [ 0.882842] isapnp: No Plug & Play device found
  247. [ 0.888258] brd: module loaded
  248. [ 0.888530] Uniform Multi-Platform E-IDE driver
  249. [ 0.889527] piix 0000:00:1f.1: IDE controller (0x8086:0x266f rev 0x03)
  250. [ 0.889814] PIIX_IDE 0000:00:1f.1: PCI INT A -> GSI 18 (level, low) -> IRQ 18
  251. [ 0.890101] piix 0000:00:1f.1: IDE port disabled
  252. [ 0.890289] piix 0000:00:1f.1: not 100% native mode: will probe irqs later
  253. [ 0.890560] ide0: BM-DMA at 0x1810-0x1817
  254. [ 0.890739] Probing IDE interface ide0...
  255. [ 1.155244] hda: ST960812A, ATA DISK drive
  256. [ 1.920005] hdb: Optiarc DVD RW AD-7530A, ATAPI CD/DVD-ROM drive
  257. [ 1.920317] hda: host max PIO4 wanted PIO255(auto-tune) selected PIO4
  258. [ 1.920538] hda: UDMA/100 mode selected
  259. [ 1.920943] hdb: host max PIO4 wanted PIO255(auto-tune) selected PIO4
  260. [ 1.921221] hdb: UDMA/33 mode selected
  261. [ 1.923487] ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
  262. [ 1.934740] ide-gd driver 1.18
  263. [ 1.934884] hda: max request size: 128KiB
  264. [ 1.935048] hda: 117210240 sectors (60011 MB) w/8192KiB Cache, CHS=65535/16/63
  265. [ 1.935459] hda: cache flushes supported
  266. [ 1.935650] hda: hda1 hda2 hda3
  267. [ 1.972930] ide-cd driver 5.00
  268. [ 1.986408] ide-cd: hdb: ATAPI 24X DVD-ROM DVD-R/RAM CD-R/RW drive, 2048kB Cache
  269. [ 1.994906] Uniform CD-ROM driver Revision: 3.20
  270. [ 2.011679] Fixed MDIO Bus: probed
  271. [ 2.020107] PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PSM1] at 0x60,0x64 irq 1,12
  272. [ 2.030213] serio: i8042 KBD port at 0x60,0x64 irq 1
  273. [ 2.038616] serio: i8042 AUX port at 0x60,0x64 irq 12
  274. [ 2.046998] mice: PS/2 mouse device common for all mice
  275. [ 2.055159] cpuidle: using governor ladder
  276. [ 2.063686] TCP bic registered
  277. [ 2.071633] NET: Registered protocol family 17
  278. [ 2.079548] Using IPI No-Shortcut mode
  279. [ 2.087834] Freeing unused kernel memory: 400k freed
  280. [ 2.096030] Write protecting the kernel text: 3944k
  281. [ 2.104031] Write protecting the kernel read-only data: 1700k
  282. [ 2.111949] BFS CPU scheduler v0.318 by Con Kolivas.
  283. [ 2.129981] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0
  284. [ 2.330466] usbcore: registered new interface driver usbfs
  285. [ 2.338874] usbcore: registered new interface driver hub
  286. [ 2.383270] usbcore: registered new device driver usb
  287. [ 2.394792] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
  288. [ 2.423689] ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 23 (level, low) -> IRQ 23
  289. [ 2.431848] ehci_hcd 0000:00:1d.7: setting latency timer to 64
  290. [ 2.431853] ehci_hcd 0000:00:1d.7: EHCI Host Controller
  291. [ 2.442222] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 1
  292. [ 2.450125] ehci_hcd 0000:00:1d.7: debug port 1
  293. [ 2.464217] 8139cp: 8139cp: 10/100 PCI Ethernet driver v1.3 (Mar 22, 2004)
  294. [ 2.473143] 8139cp 0000:06:00.0: This (id 10ec:8139 rev 10) is not an 8139C+ compatible chip, use 8139too
  295. [ 2.481554] thermal LNXTHERM:01: registered as thermal_zone0
  296. [ 2.491580] ACPI: Thermal Zone [THRM] (65 C)
  297. [ 2.500148] ehci_hcd 0000:00:1d.7: cache line size of 32 is not supported
  298. [ 2.500170] ehci_hcd 0000:00:1d.7: irq 23, io mem 0xb0040000
  299. [ 2.548411] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00
  300. [ 2.562504] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
  301. [ 2.598934] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
  302. [ 2.607110] usb usb1: Product: EHCI Host Controller
  303. [ 2.615239] usb usb1: Manufacturer: Linux 2.6.34-oshirix ehci_hcd
  304. [ 2.625890] usb usb1: SerialNumber: 0000:00:1d.7
  305. [ 2.634127] hub 1-0:1.0: USB hub found
  306. [ 2.642227] hub 1-0:1.0: 8 ports detected
  307. [ 2.692495] 8139too: 8139too Fast Ethernet driver 0.9.28
  308. [ 2.700799] 8139too 0000:06:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
  309. [ 2.721215] sdhci: Secure Digital Host Controller Interface driver
  310. [ 2.731446] sdhci: Copyright(c) Pierre Ossman
  311. [ 2.740389] 8139too 0000:06:00.0: eth0: RealTek RTL8139 at 0x3000, 00:16:36:5b:2f:49, IRQ 16
  312. [ 2.749033] ohci1394 0000:06:09.2: PCI INT C -> GSI 22 (level, low) -> IRQ 22
  313. [ 2.761611] uhci_hcd: USB Universal Host Controller Interface driver
  314. [ 2.770805] uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23
  315. [ 2.781499] uhci_hcd 0000:00:1d.0: setting latency timer to 64
  316. [ 2.781504] uhci_hcd 0000:00:1d.0: UHCI Host Controller
  317. [ 2.790152] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2
  318. [ 2.801060] uhci_hcd 0000:00:1d.0: irq 23, io base 0x00001820
  319. [ 2.809491] usb usb2: New USB device found, idVendor=1d6b, idProduct=0001
  320. [ 2.819063] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
  321. [ 2.827774] usb usb2: Product: UHCI Host Controller
  322. [ 2.836355] usb usb2: Manufacturer: Linux 2.6.34-oshirix uhci_hcd
  323. [ 2.845013] usb usb2: SerialNumber: 0000:00:1d.0
  324. [ 2.853701] ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[22] MMIO=[b0108800-b0108fff] Max Packet=[2048] IR/IT contexts=[4/8]
  325. [ 2.872334] b43-pci-bridge 0000:06:06.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
  326. [ 2.885338] hub 2-0:1.0: USB hub found
  327. [ 2.894866] ssb: Core 0 found: ChipCommon (cc 0x800, rev 0x0D, vendor 0x4243)
  328. [ 2.894874] ssb: Core 1 found: IEEE 802.11 (cc 0x812, rev 0x09, vendor 0x4243)
  329. [ 2.894882] ssb: Core 2 found: PCI (cc 0x804, rev 0x0C, vendor 0x4243)
  330. [ 2.894890] ssb: Core 3 found: PCMCIA (cc 0x80D, rev 0x07, vendor 0x4243)
  331. [ 2.894908] hub 2-0:1.0: 2 ports detected
  332. [ 2.904343] uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19
  333. [ 2.916038] uhci_hcd 0000:00:1d.1: setting latency timer to 64
  334. [ 2.916042] uhci_hcd 0000:00:1d.1: UHCI Host Controller
  335. [ 2.928854] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3
  336. [ 2.940509] uhci_hcd 0000:00:1d.1: irq 19, io base 0x00001840
  337. [ 2.951221] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
  338. [ 2.960569] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
  339. [ 2.970009] ssb: Sonics Silicon Backplane found on PCI device 0000:06:06.0
  340. [ 2.979766] sdhci-pci 0000:06:09.4: SDHCI controller found [104c:8034] (rev 0)
  341. [ 2.989204] sdhci-pci 0000:06:09.4: PCI INT A -> GSI 20 (level, low) -> IRQ 20
  342. [ 2.998659] Registered led device: mmc0::
  343. [ 2.998735] usb usb3: Product: UHCI Host Controller
  344. [ 3.008368] mmc0: SDHCI controller on PCI [0000:06:09.4] using PIO
  345. [ 3.017870] Registered led device: mmc1::
  346. [ 3.017894] mmc1: SDHCI controller on PCI [0000:06:09.4] using PIO
  347. [ 3.027225] usb usb3: Manufacturer: Linux 2.6.34-oshirix uhci_hcd
  348. [ 3.036912] usb usb3: SerialNumber: 0000:00:1d.1
  349. [ 3.046202] hub 3-0:1.0: USB hub found
  350. [ 3.057302] Registered led device: mmc2::
  351. [ 3.057327] mmc2: SDHCI controller on PCI [0000:06:09.4] using PIO
  352. [ 3.068179] hub 3-0:1.0: 2 ports detected
  353. [ 3.079055] uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
  354. [ 3.088645] uhci_hcd 0000:00:1d.2: setting latency timer to 64
  355. [ 3.088650] uhci_hcd 0000:00:1d.2: UHCI Host Controller
  356. [ 3.097712] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4
  357. [ 3.106820] uhci_hcd 0000:00:1d.2: irq 18, io base 0x00001860
  358. [ 3.116921] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
  359. [ 3.126110] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
  360. [ 3.135312] usb usb4: Product: UHCI Host Controller
  361. [ 3.144810] usb usb4: Manufacturer: Linux 2.6.34-oshirix uhci_hcd
  362. [ 3.161277] usb usb4: SerialNumber: 0000:00:1d.2
  363. [ 3.170543] hub 4-0:1.0: USB hub found
  364. [ 3.181662] hub 4-0:1.0: 2 ports detected
  365. [ 3.192793] uhci_hcd 0000:00:1d.3: PCI INT D -> GSI 16 (level, low) -> IRQ 16
  366. [ 3.203087] uhci_hcd 0000:00:1d.3: setting latency timer to 64
  367. [ 3.203092] uhci_hcd 0000:00:1d.3: UHCI Host Controller
  368. [ 3.211941] uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 5
  369. [ 3.221976] uhci_hcd 0000:00:1d.3: irq 16, io base 0x00001880
  370. [ 3.230780] usb usb5: New USB device found, idVendor=1d6b, idProduct=0001
  371. [ 3.239673] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
  372. [ 3.248551] usb usb5: Product: UHCI Host Controller
  373. [ 3.257589] usb usb5: Manufacturer: Linux 2.6.34-oshirix uhci_hcd
  374. [ 3.266432] usb usb5: SerialNumber: 0000:00:1d.3
  375. [ 3.277296] hub 5-0:1.0: USB hub found
  376. [ 3.287053] hub 5-0:1.0: 2 ports detected
  377. [ 3.427744] device-mapper: uevent: version 1.0.3
  378. [ 3.437079] device-mapper: ioctl: 4.17.0-ioctl (2010-03-05) initialised: dm-devel@redhat.com
  379. [ 3.800867] EXT4-fs (hda3): mounted filesystem with ordered data mode
  380. [ 5.044574] ACPI: EC: GPE storm detected, transactions will use polling mode
  381. [ 5.859593] udev: starting version 157
  382. [ 6.444402] Linux agpgart interface v0.103
  383. [ 6.563378] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
  384. [ 6.577576] agpgart-intel 0000:00:00.0: Intel 915GM Chipset
  385. [ 6.589221] agpgart-intel 0000:00:00.0: detected 7932K stolen memory
  386. [ 6.603638] agpgart-intel 0000:00:00.0: AGP aperture is 256M @ 0xc0000000
  387. [ 6.619420] Marking TSC unstable due to TSC halts in idle
  388. [ 6.628736] Switching to clocksource hpet
  389. [ 6.656392] intel_rng: FWH not detected
  390. [ 6.694212] ACPI: AC Adapter [ACAD] (on-line)
  391. [ 6.768211] udev: renamed network interface eth0 to eth1
  392. [ 6.855648] rtc_cmos 00:07: RTC can wake from S4
  393. [ 6.867353] rtc_cmos 00:07: rtc core: registered rtc_cmos as rtc0
  394. [ 6.876635] rtc0: alarms up to one month, y3k, 242 bytes nvram, hpet irqs
  395. [ 6.976096] ACPI: Battery Slot [BAT0] (battery present)
  396. [ 6.993416] ACPI: WMI: Mapper loaded
  397. [ 7.058880] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input1
  398. [ 7.068232] ACPI: Video Device [GFX0] (multi-head: yes rom: yes post: no)
  399. [ 7.095616] serial 0000:00:1e.3: PCI INT B -> GSI 20 (level, low) -> IRQ 20
  400. [ 7.105442] serial 0000:00:1e.3: PCI INT B disabled
  401. [ 7.173805] yenta_cardbus 0000:06:09.0: CardBus bridge found [103c:3080]
  402. [ 7.184174] yenta_cardbus 0000:06:09.0: Enabling burst memory read transactions
  403. [ 7.193902] yenta_cardbus 0000:06:09.0: Using CSCINT to route CSC interrupts to PCI
  404. [ 7.203397] yenta_cardbus 0000:06:09.0: Routing CardBus interrupts to PCI
  405. [ 7.212811] yenta_cardbus 0000:06:09.0: TI: mfunc 0x01a01b22, devctl 0x64
  406. [ 7.223445] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input2
  407. [ 7.233179] ACPI: Power Button [PRWB]
  408. [ 7.242675] input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input3
  409. [ 7.253035] ACPI: Sleep Button [SLPB]
  410. [ 7.265087] input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input4
  411. [ 7.285883] input: PC Speaker as /devices/platform/pcspkr/input/input5
  412. [ 7.296159] i801_smbus 0000:00:1f.3: PCI INT B -> GSI 19 (level, low) -> IRQ 19
  413. [ 7.306022] ACPI: resource 0000:00:1f.3 [io 0x20a0-0x20bf] conflicts with ACPI region SMBI [??? 0x000020a0-0x000020af flags 0x49]
  414. [ 7.333109] ACPI: Lid Switch [LID]
  415. [ 7.343263] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input6
  416. [ 7.353779] ACPI: Power Button [PWRF]
  417. [ 7.366083] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
  418. [ 7.454901] yenta_cardbus 0000:06:09.0: ISA IRQ mask 0x0cf8, PCI irq 20
  419. [ 7.465362] yenta_cardbus 0000:06:09.0: Socket status: 30000006
  420. [ 7.475722] pci_bus 0000:06: Raising subordinate bus# of parent bus (#06) from #06 to #0a
  421. [ 7.486527] yenta_cardbus 0000:06:09.0: pcmcia: parent PCI bridge window: [io 0x3000-0x3fff]
  422. [ 7.497121] pcmcia_socket pcmcia_socket0: cs: IO port probe 0x3000-0x3fff: excluding 0x3000-0x30ff 0x3400-0x34ff 0x3800-0x38ff
  423. [ 7.524039] yenta_cardbus 0000:06:09.0: pcmcia: parent PCI bridge window: [mem 0xb0100000-0xb01fffff]
  424. [ 7.535063] pcmcia_socket pcmcia_socket0: cs: memory probe 0xb0100000-0xb01fffff: excluding 0xb0100000-0xb010ffff
  425. [ 7.550374] yenta_cardbus 0000:06:09.0: pcmcia: parent PCI bridge window: [mem 0x20000000-0x23ffffff pref]
  426. [ 7.562774] pcmcia_socket pcmcia_socket0: cs: memory probe 0x20000000-0x23ffffff: excluding 0x20000000-0x23ffffff
  427. [ 7.601700] input: HP WMI hotkeys as /devices/virtual/input/input7
  428. [ 7.646389] cfg80211: Calling CRDA to update world regulatory domain
  429. [ 7.679340] Synaptics Touchpad, model: 1, fw: 5.10, id: 0x258eb1, caps: 0xa04713/0x0/0x0
  430. [ 7.724104] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio1/input/input8
  431. [ 8.125185] tifm_7xx1 0000:06:09.3: PCI INT A -> GSI 20 (level, low) -> IRQ 20
  432. [ 8.137648] b43-phy0: Broadcom 4318 WLAN found (core revision 9)
  433. [ 8.194498] [drm] Initialized drm 1.1.0 20060810
  434. [ 8.348712] pcmcia_socket pcmcia_socket0: cs: IO port probe 0x100-0x3af: excluding 0x170-0x177 0x1f0-0x1f7 0x370-0x377
  435. [ 8.362688] pcmcia_socket pcmcia_socket0: cs: IO port probe 0x3e0-0x4ff: excluding 0x3f0-0x3f7 0x4d0-0x4d7
  436. [ 8.375639] pcmcia_socket pcmcia_socket0: cs: IO port probe 0x820-0x8ff: clean.
  437. [ 8.388760] pcmcia_socket pcmcia_socket0: cs: IO port probe 0xc00-0xcf7: clean.
  438. [ 8.401458] pcmcia_socket pcmcia_socket0: cs: memory probe 0x0c0000-0x0fffff: excluding 0xc0000-0xc7fff 0xcc000-0xd3fff 0xdc000-0xfffff
  439. [ 8.431095] pcmcia_socket pcmcia_socket0: cs: memory probe 0xa0000000-0xa0ffffff: clean.
  440. [ 8.443437] pcmcia_socket pcmcia_socket0: cs: memory probe 0x60000000-0x60ffffff: clean.
  441. [ 8.455514] pcmcia_socket pcmcia_socket0: cs: IO port probe 0xa00-0xaff: clean.
  442. [ 8.488193] phy0: Selected rate control algorithm 'minstrel'
  443. [ 8.488566] Registered led device: b43-phy0::radio
  444. [ 8.488638] Broadcom 43xx driver loaded [ Features: PMLS, Firmware-ID: FW13 ]
  445. [ 8.511091] udev: renamed network interface wlan0 to wlan1
  446. [ 8.603106] i915 0000:00:02.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
  447. [ 8.615166] i915 0000:00:02.0: setting latency timer to 64
  448. [ 8.619434] [drm] set up 7M of stolen space
  449. [ 8.791716] [drm] initialized overlay support
  450. [ 9.493726] fb: conflicting fb hw usage inteldrmfb vs VESA VGA - removing generic driver
  451. [ 9.495684] Console: switching to colour dummy device 80x25
  452. [ 9.495853] Console: switching to colour frame buffer device 160x48
  453. [ 9.585174] fb0: inteldrmfb frame buffer device
  454. [ 9.585219] registered panic notifier
  455. [ 9.585266] [drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0
  456. [ 9.585389] Intel ICH 0000:00:1e.2: PCI INT A -> GSI 17 (level, low) -> IRQ 17
  457. [ 9.585491] Intel ICH 0000:00:1e.2: setting latency timer to 64
  458. [ 9.894027] intel8x0_measure_ac97_clock: measured 50134 usecs (2416 samples)
  459. [ 9.894112] intel8x0: clocking to 48000
  460. [ 9.895134] Intel ICH Modem 0000:00:1e.3: PCI INT B -> GSI 20 (level, low) -> IRQ 20
  461. [ 9.895234] Intel ICH Modem 0000:00:1e.3: setting latency timer to 64
  462. [ 10.247062] MC'97 0 converters and GPIO not ready (0x1)
  463. [ 11.172688] Adding 1020120k swap on /dev/hda2. Priority:-1 extents:1 across:1020120k
  464. [ 11.778798] fuse init (API version 7.13)
  465. [ 12.983183] eth1: link down
  466. [ 13.597048] b43 ssb0:0: firmware: requesting b43/ucode5.fw
  467. [ 13.657830] b43 ssb0:0: firmware: requesting b43/pcm5.fw
  468. [ 13.706045] b43 ssb0:0: firmware: requesting b43/b0g0initvals5.fw
  469. [ 13.741506] b43 ssb0:0: firmware: requesting b43/b0g0bsinitvals5.fw
  470. [ 13.881031] b43-phy0: Loading firmware version 410.2160 (2007-05-26 15:32:10)
  471. [ 13.933104] b43-phy0: Radio hardware status changed to DISABLED
  472. [ 13.936948] b43-phy0: Radio turned on by software
  473. [ 13.939139] b43-phy0: The hardware RF-kill button still turns the radio physically off. Press the button to turn it on.
  474. [ 14.558131] lp: driver loaded but no devices found
  475. [ 14.566733] ppdev: user-space parallel port driver
  476. [ 15.468572] NET: Registered protocol family 10
  477. [ 15.473175] lo: Disabled Privacy Extensions
  478. [ 15.476033] ADDRCONF(NETDEV_UP): eth1: link is not ready
  479. rabg@rabg:~$
Advertisement
Add Comment
Please, Sign In to add comment
Advertisement
Public Pastes
Advertisement
We use cookies for various purposes including analytics. By continuing to use Pastebin, you agree to our use of cookies as described in the Cookies Policy.  OK, I Understand
Not a member of Pastebin yet?
Sign Up, it unlocks many cool features!