Advertisement
Not a member of Pastebin yet?
Sign Up,
it unlocks many cool features!
- U-Boot SPL 2019.10-armbian (Feb 17 2020 - 08:31:10 +0100)
- DRAM: 1024 MiB
- Trying to boot from MMC1
- NOTICE: BL31: v2.2(debug):572fcdd-dirty
- NOTICE: BL31: Built : 08:31:00, Feb 17 2020
- NOTICE: BL31: Detected Allwinner H6 SoC (1728)
- NOTICE: BL31: Found U-Boot DTB at 0xc07ef00, model: OrangePi Lite 2
- INFO: ARM GICv2 driver initialized
- INFO: PMIC: Probing AXP805 on I2C
- INFO: PMIC: aldo1 voltage: 3.300V
- INFO: PMIC: aldo3 voltage: 3.300V
- INFO: PMIC: bldo1 voltage: 1.800V
- INFO: PMIC: bldo2 voltage: 1.800V
- INFO: PMIC: bldo3 voltage: 1.800V
- INFO: PMIC: cldo1 voltage: 3.300V
- INFO: PMIC: dcdcd voltage: 0.960V
- INFO: PMIC: dcdce voltage: 1.200V
- INFO: BL31: Platform setup done
- INFO: BL31: Initializing runtime services
- INFO: BL31: cortex_a53: CPU workaround for 855873 was applied
- INFO: BL31: Preparing for EL3 exit to normal world
- INFO: Entry point address = 0x4a000000
- INFO: SPSR = 0x3c9
- U-Boot 2019.10-armbian (Feb 17 2020 - 08:31:10 +0100) Allwinner Technology
- CPU: Allwinner H6 (SUN50I)
- Model: OrangePi Lite 2
- DRAM: 1 GiB
- MMC: mmc@4020000: 0
- Loading Environment from EXT4... ** File not found /boot/boot.env **
- ** Unable to read "/boot/boot.env" from mmc0:1 **
- In: serial@5000000
- Out: serial@5000000
- Err: serial@5000000
- Net: No ethernet found.
- Hit any key to stop autoboot: 1 0
- switch to partitions #0, OK
- mmc0 is current device
- Scanning mmc 0:1...
- Found U-Boot script /boot/boot.scr
- 3033 bytes read in 4 ms (740.2 KiB/s)
- ## Executing script at 4fc00000
- U-boot loaded from SD
- Boot script loaded from mmc
- 180 bytes read in 4 ms (43.9 KiB/s)
- 32785 bytes read in 18 ms (1.7 MiB/s)
- 790 bytes read in 10 ms (77.1 KiB/s)
- Applying kernel provided DT overlay sun50i-h6-uart3.dtbo
- 4161 bytes read in 9 ms (451.2 KiB/s)
- Applying kernel provided DT fixup script (sun50i-h6-fixup.scr)
- ## Executing script at 44000000
- 8762930 bytes read in 882 ms (9.5 MiB/s)
- 15687688 bytes read in 1575 ms (9.5 MiB/s)
- ## Loading init Ramdisk from Legacy Image at 4fe00000 ...
- Image Name: uInitrd
- Image Type: AArch64 Linux RAMDisk Image (gzip compressed)
- Data Size: 8762866 Bytes = 8.4 MiB
- Load Address: 00000000
- Entry Point: 00000000
- Verifying Checksum ... OK
- ## Flattened Device Tree blob at 4fa00000
- Booting using the fdt blob at 0x4fa00000
- Loading Ramdisk to 497a4000, end 49fff5f2 ... OK
- Loading Device Tree to 0000000049733000, end 00000000497a3fff ... OK
- Starting kernel ...
Advertisement
Add Comment
Please, Sign In to add comment
Advertisement