Not a member of Pastebin yet?
Sign Up,
it unlocks many cool features!
- Linux version 3.2.12-gentoo (root@poseidon) (gcc version 4.5.3 (Gentoo 4.5.3-r1 p1.0, pie-0.4.5) ) #1 SMP Thu Jun 21 14:34:32 UTC 2012
- Command line: root=/dev/ram0 init=/linuxrc dokeymap looptype=squashfs loop=/image.squashfs cdroot initrd=gentoo.igz vga=791 BOOT_IMAGE=gentoo
- BIOS-provided physical RAM map:
- BIOS-e820: 0000000000000000 - 000000000009d000 (usable)
- BIOS-e820: 000000000009d000 - 00000000000a0000 (reserved)
- BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved)
- BIOS-e820: 0000000000100000 - 000000009b63f000 (usable)
- BIOS-e820: 000000009b63f000 - 000000009b6bf000 (reserved)
- BIOS-e820: 000000009b6bf000 - 000000009b7bf000 (ACPI NVS)
- BIOS-e820: 000000009b7bf000 - 000000009b7ff000 (ACPI data)
- BIOS-e820: 000000009b7ff000 - 000000009b800000 (usable)
- BIOS-e820: 000000009b800000 - 00000000a0000000 (reserved)
- BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved)
- BIOS-e820: 00000000feb00000 - 00000000feb04000 (reserved)
- BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved)
- BIOS-e820: 00000000fed10000 - 00000000fed14000 (reserved)
- BIOS-e820: 00000000fed18000 - 00000000fed1a000 (reserved)
- BIOS-e820: 00000000fed1b000 - 00000000fed20000 (reserved)
- BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
- BIOS-e820: 00000000ffe00000 - 0000000100000000 (reserved)
- BIOS-e820: 0000000100000000 - 0000000158000000 (usable)
- NX (Execute Disable) protection: active
- DMI 2.6 present.
- DMI: Hewlett-Packard HP Pavilion g6 Notebook PC/1693, BIOS F.17 05/13/2011
- e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved)
- e820 remove range: 00000000000a0000 - 0000000000100000 (usable)
- No AGP bridge found
- last_pfn = 0x158000 max_arch_pfn = 0x400000000
- MTRR default type: uncachable
- MTRR fixed ranges enabled:
- 00000-9FFFF write-back
- A0000-BFFFF uncachable
- C0000-EFFFF write-through
- F0000-FFFFF write-combining
- MTRR variable ranges enabled:
- 0 base 000000000 mask F80000000 write-back
- 1 base 0FFE00000 mask FFFE00000 write-protect
- 2 base 080000000 mask FE0000000 write-back
- 3 base 09C000000 mask FFC000000 uncachable
- 4 base 09B800000 mask FFF800000 uncachable
- 5 base 100000000 mask F80000000 write-back
- 6 base 158000000 mask FF8000000 uncachable
- 7 base 160000000 mask FE0000000 uncachable
- last_pfn = 0x9b800 max_arch_pfn = 0x400000000
- initial memory mapped : 0 - 20000000
- Base memory trampoline at [ffff88000009b000] 9b000 size 8192
- init_memory_mapping: 0000000000000000-000000009b800000
- 0000000000 - 009b800000 page 2M
- kernel direct mapping tables up to 9b800000 @ 1fffc000-20000000
- init_memory_mapping: 0000000100000000-0000000158000000
- 0100000000 - 0158000000 page 2M
- kernel direct mapping tables up to 158000000 @ 9b638000-9b63f000
- RAMDISK: 7f9fb000 - 7ffff000
- ACPI: RSDP 00000000000fe020 00024 (v02 HPQOEM)
- ACPI: XSDT 000000009b7fe120 0006C (v01 HPQOEM SLIC-MPC 00000001 01000013)
- ACPI: FACP 000000009b7fc000 000F4 (v04 HPQOEM SLIC-MPC 00000001 MSFT 01000013)
- ACPI: DSDT 000000009b7ea000 0E5B7 (v02 HP INSYDE 00000001 MSFT 01000013)
- ACPI: FACS 000000009b76d000 00040
- ACPI: ASF! 000000009b7fd000 000A5 (v32 HP INSYDE 00000001 MSFT 01000013)
- ACPI: HPET 000000009b7fb000 00038 (v01 HP INSYDE 00000001 MSFT 01000013)
- ACPI: APIC 000000009b7fa000 0008C (v02 HP INSYDE 00000001 MSFT 01000013)
- ACPI: MCFG 000000009b7f9000 0003C (v01 HP INSYDE 00000001 MSFT 01000013)
- ACPI: SLIC 000000009b7e9000 00176 (v01 HPQOEM SLIC-MPC 00000001 MSFT 01000013)
- ACPI: BOOT 000000009b7e5000 00028 (v01 HP INSYDE 00000001 MSFT 01000013)
- ACPI: ASPT 000000009b7e2000 00034 (v04 HP INSYDE 00000001 MSFT 01000013)
- ACPI: SSDT 000000009b7e1000 009F1 (v01 PmRef CpuPm 00003000 INTL 20051117)
- ACPI: Local APIC address 0xfee00000
- [ffffea0000000000-ffffea0004bfffff] PMD -> [ffff880153800000-ffff880156ffffff] on node 0
- Zone PFN ranges:
- DMA 0x00000010 -> 0x00001000
- DMA32 0x00001000 -> 0x00100000
- Normal 0x00100000 -> 0x00158000
- Movable zone start PFN for each node
- early_node_map[4] active PFN ranges
- 0: 0x00000010 -> 0x0000009d
- 0: 0x00000100 -> 0x0009b63f
- 0: 0x0009b7ff -> 0x0009b800
- 0: 0x00100000 -> 0x00158000
- On node 0 totalpages: 996813
- DMA zone: 56 pages used for memmap
- DMA zone: 2 pages reserved
- DMA zone: 3923 pages, LIFO batch:0
- DMA32 zone: 14280 pages used for memmap
- DMA32 zone: 618104 pages, LIFO batch:31
- Normal zone: 4928 pages used for memmap
- Normal zone: 355520 pages, LIFO batch:31
- ACPI: Local APIC address 0xfee00000
- ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
- ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
- ACPI: LAPIC (acpi_id[0x03] lapic_id[0x04] enabled)
- ACPI: LAPIC (acpi_id[0x04] lapic_id[0x05] enabled)
- ACPI: LAPIC (acpi_id[0x05] lapic_id[0x00] disabled)
- ACPI: LAPIC (acpi_id[0x06] lapic_id[0x00] disabled)
- ACPI: LAPIC (acpi_id[0x07] lapic_id[0x00] disabled)
- ACPI: LAPIC (acpi_id[0x08] lapic_id[0x00] disabled)
- ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
- IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23
- ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
- ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
- ACPI: IRQ0 used by override.
- ACPI: IRQ2 used by override.
- ACPI: IRQ9 used by override.
- Using ACPI (MADT) for SMP configuration information
- ACPI: HPET id: 0x8086a201 base: 0xfed00000
- SMP: Allowing 8 CPUs, 4 hotplug CPUs
- nr_irqs_gsi: 40
- Allocating PCI resources starting at a0000000 (gap: a0000000:40000000)
- Booting paravirtualized kernel on bare hardware
- setup_percpu: NR_CPUS:64 nr_cpumask_bits:64 nr_cpu_ids:8 nr_node_ids:1
- PERCPU: Embedded 26 pages/cpu @ffff880157c00000 s75328 r8192 d22976 u262144
- pcpu-alloc: s75328 r8192 d22976 u262144 alloc=1*2097152
- pcpu-alloc: [0] 0 1 2 3 4 5 6 7
- Built 1 zonelists in Zone order, mobility grouping on. Total pages: 977547
- Kernel command line: root=/dev/ram0 init=/linuxrc dokeymap looptype=squashfs loop=/image.squashfs cdroot initrd=gentoo.igz vga=791 BOOT_IMAGE=gentoo
- PID hash table entries: 4096 (order: 3, 32768 bytes)
- Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes)
- Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes)
- Checking aperture...
- No AGP bridge found
- Memory: 3841120k/5636096k available (4124k kernel code, 1648844k absent, 146132k reserved, 4376k data, 524k init)
- Hierarchical RCU implementation.
- NR_IRQS:4352 nr_irqs:744 16
- Console: colour dummy device 80x25
- console [tty0] enabled
- hpet clockevent registered
- Fast TSC calibration using PIT
- Detected 2393.714 MHz processor.
- Calibrating delay loop (skipped), value calculated using timer frequency.. 4787.42 BogoMIPS (lpj=23937140)
- pid_max: default: 32768 minimum: 301
- Mount-cache hash table entries: 256
- CPU: Physical Processor ID: 0
- CPU: Processor Core ID: 0
- mce: CPU supports 9 MCE banks
- CPU0: Thermal monitoring handled by SMI
- using mwait in idle threads.
- ACPI: Core revision 20110623
- ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
- CPU0: Intel(R) Core(TM) i3 CPU M 370 @ 2.40GHz stepping 05
- Performance Events: PEBS fmt1+, Westmere events, Intel PMU driver.
- ... version: 3
- ... bit width: 48
- ... generic registers: 4
- ... value mask: 0000ffffffffffff
- ... max period: 000000007fffffff
- ... fixed-purpose events: 3
- ... event mask: 000000070000000f
- Booting Node 0, Processors #1
- smpboot cpu 1: start_ip = 9b000
- CPU1: Thermal monitoring handled by SMI
- #2
- smpboot cpu 2: start_ip = 9b000
- CPU2: Thermal monitoring handled by SMI
- #3
- smpboot cpu 3: start_ip = 9b000
- CPU3: Thermal monitoring handled by SMI
- Brought up 4 CPUs
- Total of 4 processors activated (19150.82 BogoMIPS).
- devtmpfs: initialized
- NET: Registered protocol family 16
- ACPI FADT declares the system doesn't support PCIe ASPM, so disable it
- ACPI: bus type pci registered
- dca service started, version 1.12.1
- PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
- PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in E820
- PCI: Using configuration type 1 for base access
- bio: create slab <bio-0> at 0
- ACPI: Added _OSI(Module Device)
- ACPI: Added _OSI(Processor Device)
- ACPI: Added _OSI(3.0 _SCP Extensions)
- ACPI: Added _OSI(Processor Aggregator Device)
- ACPI: EC: Look up EC in DSDT
- ACPI: Executed 1 blocks of module-level executable AML code
- [Firmware Bug]: ACPI: BIOS _OSI(Linux) query ignored
- ACPI: SSDT 000000009b691918 00432 (v01 PmRef Cpu0Ist 00003000 INTL 20051117)
- ACPI: Dynamic OEM Table Load:
- ACPI: SSDT (null) 00432 (v01 PmRef Cpu0Ist 00003000 INTL 20051117)
- ACPI: SSDT 000000009b68f018 00891 (v01 PmRef Cpu0Cst 00003001 INTL 20051117)
- ACPI: Dynamic OEM Table Load:
- ACPI: SSDT (null) 00891 (v01 PmRef Cpu0Cst 00003001 INTL 20051117)
- ACPI: SSDT 000000009b690a98 00303 (v01 PmRef ApIst 00003000 INTL 20051117)
- ACPI: Dynamic OEM Table Load:
- ACPI: SSDT (null) 00303 (v01 PmRef ApIst 00003000 INTL 20051117)
- ACPI: SSDT 000000009b68ed98 00119 (v01 PmRef ApCst 00003000 INTL 20051117)
- ACPI: Dynamic OEM Table Load:
- ACPI: SSDT (null) 00119 (v01 PmRef ApCst 00003000 INTL 20051117)
- ACPI: Interpreter enabled
- ACPI: (supports S0 S5)
- ACPI: Using IOAPIC for interrupt routing
- ACPI: Power Resource [FN00] (off)
- ACPI: EC: GPE = 0x17, I/O: command/status = 0x66, data = 0x62
- ACPI: No dock devices found.
- PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
- \_SB_.PCI0:_OSC invalid UUID
- _OSC request data:1 8 1f
- ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-fe])
- pci_root PNP0A08:00: host bridge window [io 0x0000-0x0cf7]
- pci_root PNP0A08:00: host bridge window [io 0x0d00-0xffff]
- pci_root PNP0A08:00: host bridge window [mem 0x000a0000-0x000bffff]
- pci_root PNP0A08:00: host bridge window [mem 0xa0000000-0xfeafffff]
- pci 0000:00:00.0: [8086:0044] type 0 class 0x000600
- pci 0000:00:02.0: [8086:0046] type 0 class 0x000300
- pci 0000:00:02.0: reg 10: [mem 0xb0000000-0xb03fffff 64bit]
- pci 0000:00:02.0: reg 18: [mem 0xa0000000-0xafffffff 64bit pref]
- pci 0000:00:02.0: reg 20: [io 0x4050-0x4057]
- pci 0000:00:16.0: [8086:3b64] type 0 class 0x000780
- pci 0000:00:16.0: reg 10: [mem 0xb6406100-0xb640610f 64bit]
- pci 0000:00:16.0: PME# supported from D0 D3hot D3cold
- pci 0000:00:16.0: PME# disabled
- pci 0000:00:1a.0: [8086:3b3c] type 0 class 0x000c03
- pci 0000:00:1a.0: reg 10: [mem 0xb6405c00-0xb6405fff]
- pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold
- pci 0000:00:1a.0: PME# disabled
- pci 0000:00:1b.0: [8086:3b56] type 0 class 0x000403
- pci 0000:00:1b.0: reg 10: [mem 0xb6400000-0xb6403fff 64bit]
- pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
- pci 0000:00:1b.0: PME# disabled
- pci 0000:00:1c.0: [8086:3b42] type 1 class 0x000604
- pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
- pci 0000:00:1c.0: PME# disabled
- pci 0000:00:1c.2: [8086:3b46] type 1 class 0x000604
- pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold
- pci 0000:00:1c.2: PME# disabled
- pci 0000:00:1c.4: [8086:3b4a] type 1 class 0x000604
- pci 0000:00:1c.4: PME# supported from D0 D3hot D3cold
- pci 0000:00:1c.4: PME# disabled
- pci 0000:00:1d.0: [8086:3b34] type 0 class 0x000c03
- pci 0000:00:1d.0: reg 10: [mem 0xb6405800-0xb6405bff]
- pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold
- pci 0000:00:1d.0: PME# disabled
- pci 0000:00:1e.0: [8086:2448] type 1 class 0x000604
- pci 0000:00:1f.0: [8086:3b09] type 0 class 0x000601
- pci 0000:00:1f.2: [8086:3b29] type 0 class 0x000106
- pci 0000:00:1f.2: reg 10: [io 0x4048-0x404f]
- pci 0000:00:1f.2: reg 14: [io 0x405c-0x405f]
- pci 0000:00:1f.2: reg 18: [io 0x4040-0x4047]
- pci 0000:00:1f.2: reg 1c: [io 0x4058-0x405b]
- pci 0000:00:1f.2: reg 20: [io 0x4020-0x403f]
- pci 0000:00:1f.2: reg 24: [mem 0xb6405000-0xb64057ff]
- pci 0000:00:1f.2: PME# supported from D3hot
- pci 0000:00:1f.2: PME# disabled
- pci 0000:00:1f.3: [8086:3b30] type 0 class 0x000c05
- pci 0000:00:1f.3: reg 10: [mem 0xb6406000-0xb64060ff 64bit]
- pci 0000:00:1f.3: reg 20: [io 0x4000-0x401f]
- pci 0000:00:1f.6: [8086:3b32] type 0 class 0x001180
- pci 0000:00:1f.6: reg 10: [mem 0xb6404000-0xb6404fff 64bit]
- pci 0000:01:00.0: [10ec:8136] type 0 class 0x000200
- pci 0000:01:00.0: reg 10: [io 0x3000-0x30ff]
- pci 0000:01:00.0: reg 18: [mem 0xb0404000-0xb0404fff 64bit pref]
- pci 0000:01:00.0: reg 20: [mem 0xb0400000-0xb0403fff 64bit pref]
- pci 0000:01:00.0: supports D1 D2
- pci 0000:01:00.0: PME# supported from D0 D1 D2 D3hot D3cold
- pci 0000:01:00.0: PME# disabled
- pci 0000:00:1c.0: PCI bridge to [bus 01-01]
- pci 0000:00:1c.0: bridge window [io 0x3000-0x3fff]
- pci 0000:00:1c.0: bridge window [mem 0xb5400000-0xb63fffff]
- pci 0000:00:1c.0: bridge window [mem 0xb0400000-0xb13fffff 64bit pref]
- pci 0000:02:00.0: [1814:5390] type 0 class 0x000280
- pci 0000:02:00.0: reg 10: [mem 0xb4400000-0xb440ffff]
- pci 0000:00:1c.2: PCI bridge to [bus 02-02]
- pci 0000:00:1c.2: bridge window [io 0x2000-0x2fff]
- pci 0000:00:1c.2: bridge window [mem 0xb4400000-0xb53fffff]
- pci 0000:00:1c.2: bridge window [mem 0xb1400000-0xb23fffff 64bit pref]
- pci 0000:03:00.0: [10ec:5209] type 0 class 0x00ff00
- pci 0000:03:00.0: reg 10: [mem 0xb3400000-0xb3400fff]
- pci 0000:03:00.0: supports D1 D2
- pci 0000:03:00.0: PME# supported from D1 D2 D3hot
- pci 0000:03:00.0: PME# disabled
- pci 0000:00:1c.4: PCI bridge to [bus 03-03]
- pci 0000:00:1c.4: bridge window [io 0x1000-0x1fff]
- pci 0000:00:1c.4: bridge window [mem 0xb3400000-0xb43fffff]
- pci 0000:00:1c.4: bridge window [mem 0xb2400000-0xb33fffff 64bit pref]
- pci 0000:00:1e.0: PCI bridge to [bus 04-04] (subtractive decode)
- pci 0000:00:1e.0: bridge window [io 0x0000-0x0cf7] (subtractive decode)
- pci 0000:00:1e.0: bridge window [io 0x0d00-0xffff] (subtractive decode)
- pci 0000:00:1e.0: bridge window [mem 0x000a0000-0x000bffff] (subtractive decode)
- pci 0000:00:1e.0: bridge window [mem 0xa0000000-0xfeafffff] (subtractive decode)
- pci_bus 0000:00: on NUMA node 0
- ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
- ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P1._PRT]
- ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP01._PRT]
- ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP03._PRT]
- ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP05._PRT]
- \_SB_.PCI0:_OSC invalid UUID
- _OSC request data:1 19 1f
- pci0000:00: Unable to request _OSC control (_OSC support mask: 0x19)
- ACPI: PCI Root Bridge [CPBG] (domain 0000 [bus ff])
- pci 0000:ff:00.0: [8086:2c62] type 0 class 0x000600
- pci 0000:ff:00.1: [8086:2d01] type 0 class 0x000600
- pci 0000:ff:02.0: [8086:2d10] type 0 class 0x000600
- pci 0000:ff:02.1: [8086:2d11] type 0 class 0x000600
- pci 0000:ff:02.2: [8086:2d12] type 0 class 0x000600
- pci 0000:ff:02.3: [8086:2d13] type 0 class 0x000600
- pci_bus 0000:ff: on NUMA node 0
- pci0000:ff: Unable to request _OSC control (_OSC support mask: 0x19)
- ACPI: PCI Interrupt Link [LNKA] (IRQs 1 3 4 5 6 7 10 12 14 15) *9
- ACPI: PCI Interrupt Link [LNKB] (IRQs 1 3 4 5 6 7 11 12 14 15) *10
- ACPI: PCI Interrupt Link [LNKC] (IRQs 1 *3 4 5 6 7 10 12 14 15)
- ACPI: PCI Interrupt Link [LNKD] (IRQs 1 3 4 5 6 7 11 12 14 15) *10
- ACPI: PCI Interrupt Link [LNKE] (IRQs 1 3 4 5 6 7 10 12 14 15) *0, disabled.
- ACPI: PCI Interrupt Link [LNKF] (IRQs 1 3 4 5 6 7 *11 12 14 15)
- ACPI: PCI Interrupt Link [LNKG] (IRQs 1 3 4 5 6 7 10 12 14 15) *11
- ACPI: PCI Interrupt Link [LNKH] (IRQs 1 3 4 5 6 7 11 12 14 15) *9
- vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none
- vgaarb: loaded
- vgaarb: bridge control possible 0000:00:02.0
- SCSI subsystem initialized
- usbcore: registered new interface driver usbfs
- usbcore: registered new interface driver hub
- usbcore: registered new device driver usb
- PCI: Using ACPI for IRQ routing
- PCI: pci_cache_line_size set to 64 bytes
- reserve RAM buffer: 000000000009d000 - 000000000009ffff
- reserve RAM buffer: 000000009b63f000 - 000000009bffffff
- reserve RAM buffer: 000000009b800000 - 000000009bffffff
- Switching to clocksource hpet
- pnp: PnP ACPI init
- ACPI: bus type pnp registered
- pnp 00:00: [bus 00-fe]
- pnp 00:00: [io 0x0000-0x0cf7 window]
- pnp 00:00: [io 0x0cf8-0x0cff]
- pnp 00:00: [io 0x0d00-0xffff window]
- pnp 00:00: [mem 0x000a0000-0x000bffff window]
- pnp 00:00: [mem 0x000c0000-0x000c3fff window]
- pnp 00:00: [mem 0x000c4000-0x000c7fff window]
- pnp 00:00: [mem 0x000c8000-0x000cbfff window]
- pnp 00:00: [mem 0x000cc000-0x000cffff window]
- pnp 00:00: [mem 0x000d0000-0x000d3fff window]
- pnp 00:00: [mem 0x000d4000-0x000d7fff window]
- pnp 00:00: [mem 0x000d8000-0x000dbfff window]
- pnp 00:00: [mem 0x000dc000-0x000dffff window]
- pnp 00:00: [mem 0x000e0000-0x000e3fff window]
- pnp 00:00: [mem 0x000e4000-0x000e7fff window]
- pnp 00:00: [mem 0x000e8000-0x000ebfff window]
- pnp 00:00: [mem 0x000ec000-0x000effff window]
- pnp 00:00: [mem 0x000f0000-0x000fffff window]
- pnp 00:00: [mem 0xa0000000-0xfeafffff window]
- pnp 00:00: Plug and Play ACPI device, IDs PNP0a08 PNP0a03 (active)
- pnp 00:01: [io 0x0000-0x001f]
- pnp 00:01: [io 0x0081-0x0091]
- pnp 00:01: [io 0x0093-0x009f]
- pnp 00:01: [io 0x00c0-0x00df]
- pnp 00:01: [dma 4]
- pnp 00:01: Plug and Play ACPI device, IDs PNP0200 (active)
- pnp 00:02: [mem 0xff000000-0xffffffff]
- pnp 00:02: Plug and Play ACPI device, IDs INT0800 (active)
- pnp 00:03: [mem 0xfed00000-0xfed003ff]
- pnp 00:03: Plug and Play ACPI device, IDs PNP0103 (active)
- pnp 00:04: [io 0x00f0]
- pnp 00:04: [irq 13]
- pnp 00:04: Plug and Play ACPI device, IDs PNP0c04 (active)
- pnp 00:05: [io 0x002e-0x002f]
- pnp 00:05: [io 0x004e-0x004f]
- pnp 00:05: [io 0x0061]
- pnp 00:05: [io 0x0063]
- pnp 00:05: [io 0x0065]
- pnp 00:05: [io 0x0067]
- pnp 00:05: [io 0x0070]
- pnp 00:05: [io 0x0080]
- pnp 00:05: [io 0x0092]
- pnp 00:05: [io 0x00b2-0x00b3]
- pnp 00:05: [io 0x0680-0x069f]
- pnp 00:05: [io 0x0800-0x080f]
- pnp 00:05: [io 0x0810-0x0813]
- pnp 00:05: [io 0xffff]
- pnp 00:05: [io 0x0400-0x047f]
- pnp 00:05: [io 0x0500-0x0501]
- pnp 00:05: [io 0x0700-0x077f]
- pnp 00:05: [io 0x164e-0x164f]
- pnp 00:05: disabling [io 0x164e-0x164f] because it overlaps 0000:00:1c.4 BAR 7 [io 0x1000-0x1fff]
- system 00:05: [io 0x0680-0x069f] has been reserved
- system 00:05: [io 0x0800-0x080f] has been reserved
- system 00:05: [io 0x0810-0x0813] has been reserved
- system 00:05: [io 0xffff] has been reserved
- system 00:05: [io 0x0400-0x047f] has been reserved
- system 00:05: [io 0x0500-0x0501] has been reserved
- system 00:05: [io 0x0700-0x077f] has been reserved
- system 00:05: Plug and Play ACPI device, IDs PNP0c02 (active)
- pnp 00:06: [io 0x0070-0x0077]
- pnp 00:06: [irq 8]
- pnp 00:06: Plug and Play ACPI device, IDs PNP0b00 (active)
- pnp 00:07: [io 0x0060]
- pnp 00:07: [io 0x0064]
- pnp 00:07: [irq 1]
- pnp 00:07: Plug and Play ACPI device, IDs PNP0303 (active)
- pnp 00:08: [irq 12]
- pnp 00:08: Plug and Play ACPI device, IDs SYN1e49 SYN1e00 SYN0002 PNP0f13 (active)
- pnp 00:09: [mem 0xfed1c000-0xfed1ffff]
- pnp 00:09: [mem 0xfed10000-0xfed13fff]
- pnp 00:09: [mem 0xfed18000-0xfed18fff]
- pnp 00:09: [mem 0xfed19000-0xfed19fff]
- pnp 00:09: [mem 0xe0000000-0xefffffff]
- pnp 00:09: [mem 0xfed20000-0xfed3ffff]
- pnp 00:09: [mem 0xfed90000-0xfed8ffff disabled]
- pnp 00:09: [mem 0xff000000-0xffffffff]
- pnp 00:09: [mem 0xfee00000-0xfeefffff]
- pnp 00:09: [mem 0xb6500000-0xb6500fff]
- system 00:09: [mem 0xfed1c000-0xfed1ffff] has been reserved
- system 00:09: [mem 0xfed10000-0xfed13fff] has been reserved
- system 00:09: [mem 0xfed18000-0xfed18fff] has been reserved
- system 00:09: [mem 0xfed19000-0xfed19fff] has been reserved
- system 00:09: [mem 0xe0000000-0xefffffff] has been reserved
- system 00:09: [mem 0xfed20000-0xfed3ffff] has been reserved
- system 00:09: [mem 0xff000000-0xffffffff] could not be reserved
- system 00:09: [mem 0xfee00000-0xfeefffff] could not be reserved
- system 00:09: [mem 0xb6500000-0xb6500fff] has been reserved
- system 00:09: Plug and Play ACPI device, IDs PNP0c02 (active)
- pnp 00:0a: [bus ff]
- pnp 00:0a: Plug and Play ACPI device, IDs PNP0a03 (active)
- pnp: PnP ACPI: found 11 devices
- ACPI: ACPI bus type pnp unregistered
- PCI: max bus depth: 1 pci_try_num: 2
- pci 0000:00:1c.0: PCI bridge to [bus 01-01]
- pci 0000:00:1c.0: bridge window [io 0x3000-0x3fff]
- pci 0000:00:1c.0: bridge window [mem 0xb5400000-0xb63fffff]
- pci 0000:00:1c.0: bridge window [mem 0xb0400000-0xb13fffff 64bit pref]
- pci 0000:00:1c.2: PCI bridge to [bus 02-02]
- pci 0000:00:1c.2: bridge window [io 0x2000-0x2fff]
- pci 0000:00:1c.2: bridge window [mem 0xb4400000-0xb53fffff]
- pci 0000:00:1c.2: bridge window [mem 0xb1400000-0xb23fffff 64bit pref]
- pci 0000:00:1c.4: PCI bridge to [bus 03-03]
- pci 0000:00:1c.4: bridge window [io 0x1000-0x1fff]
- pci 0000:00:1c.4: bridge window [mem 0xb3400000-0xb43fffff]
- pci 0000:00:1c.4: bridge window [mem 0xb2400000-0xb33fffff 64bit pref]
- pci 0000:00:1e.0: PCI bridge to [bus 04-04]
- pci 0000:00:1c.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
- pci 0000:00:1c.0: setting latency timer to 64
- pci 0000:00:1c.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
- pci 0000:00:1c.2: setting latency timer to 64
- pci 0000:00:1c.4: PCI INT A -> GSI 17 (level, low) -> IRQ 17
- pci 0000:00:1c.4: setting latency timer to 64
- pci 0000:00:1e.0: setting latency timer to 64
- pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7]
- pci_bus 0000:00: resource 5 [io 0x0d00-0xffff]
- pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
- pci_bus 0000:00: resource 7 [mem 0xa0000000-0xfeafffff]
- pci_bus 0000:01: resource 0 [io 0x3000-0x3fff]
- pci_bus 0000:01: resource 1 [mem 0xb5400000-0xb63fffff]
- pci_bus 0000:01: resource 2 [mem 0xb0400000-0xb13fffff 64bit pref]
- pci_bus 0000:02: resource 0 [io 0x2000-0x2fff]
- pci_bus 0000:02: resource 1 [mem 0xb4400000-0xb53fffff]
- pci_bus 0000:02: resource 2 [mem 0xb1400000-0xb23fffff 64bit pref]
- pci_bus 0000:03: resource 0 [io 0x1000-0x1fff]
- pci_bus 0000:03: resource 1 [mem 0xb3400000-0xb43fffff]
- pci_bus 0000:03: resource 2 [mem 0xb2400000-0xb33fffff 64bit pref]
- pci_bus 0000:04: resource 4 [io 0x0000-0x0cf7]
- pci_bus 0000:04: resource 5 [io 0x0d00-0xffff]
- pci_bus 0000:04: resource 6 [mem 0x000a0000-0x000bffff]
- pci_bus 0000:04: resource 7 [mem 0xa0000000-0xfeafffff]
- NET: Registered protocol family 2
- IP route cache hash table entries: 131072 (order: 8, 1048576 bytes)
- TCP established hash table entries: 262144 (order: 10, 4194304 bytes)
- TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
- TCP: Hash tables configured (established 262144 bind 65536)
- TCP reno registered
- UDP hash table entries: 2048 (order: 4, 65536 bytes)
- UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes)
- NET: Registered protocol family 1
- RPC: Registered named UNIX socket transport module.
- RPC: Registered udp transport module.
- RPC: Registered tcp transport module.
- RPC: Registered tcp NFSv4.1 backchannel transport module.
- pci 0000:00:02.0: Boot video device
- pci 0000:00:1a.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
- pci 0000:00:1a.0: PCI INT A disabled
- pci 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23
- pci 0000:00:1d.0: PCI INT A disabled
- PCI: CLS 64 bytes, default 64
- Trying to unpack rootfs image as initramfs...
- Freeing initrd memory: 6160k freed
- PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
- Placing 64MB software IO TLB between ffff880097638000 - ffff88009b638000
- software IO TLB at phys 0x97638000 - 0x9b638000
- Simple Boot Flag at 0x44 set to 0x1
- VFS: Disk quotas dquot_6.5.2
- Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
- squashfs: version 4.0 (2009/01/31) Phillip Lougher
- NTFS driver 2.1.30 [Flags: R/O].
- SGI XFS with ACLs, security attributes, realtime, large block/inode numbers, no debug enabled
- SGI XFS Quota Management subsystem
- msgmni has been set to 7514
- Block layer SCSI generic (bsg) driver version 0.4 loaded (major 254)
- io scheduler noop registered
- io scheduler deadline registered (default)
- Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
- Linux agpgart interface v0.103
- vesafb: mode is 1024x768x16, linelength=2048, pages=20
- vesafb: scrolling: redraw
- vesafb: Truecolor: size=0:5:6:5, shift=0:11:5:0
- vesafb: framebuffer at 0xa0000000, mapped to 0xffffc90010100000, using 3072k, total 32704k
- Console: switching to colour frame buffer device 128x48
- fb0: VESA VGA frame buffer device
- ioatdma: Intel(R) QuickData Technology Driver 4.00
- XENFS: not registering filesystem on non-xen platform
- brd: module loaded
- loop: module loaded
- Loading iSCSI transport class v2.0-870.
- iscsi: registered transport (tcp)
- st: Version 20101219, fixed bufsize 32768, s/g segs 256
- SCSI Media Changer driver v0.25
- Atheros(R) L2 Ethernet Driver - version 2.2.3
- Copyright (c) 2007 Atheros Corporation.
- jme: JMicron JMC2XX ethernet driver version 1.0.8
- aoe: AoE v47 initialised.
- i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
- i8042: Detected active multiplexing controller, rev 1.1
- serio: i8042 KBD port at 0x60,0x64 irq 1
- serio: i8042 AUX0 port at 0x60,0x64 irq 12
- serio: i8042 AUX1 port at 0x60,0x64 irq 12
- serio: i8042 AUX2 port at 0x60,0x64 irq 12
- serio: i8042 AUX3 port at 0x60,0x64 irq 12
- mousedev: PS/2 mouse device common for all mice
- cpuidle: using governor ladder
- usbcore: registered new interface driver usbhid
- usbhid: USB HID core driver
- TCP cubic registered
- input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0
- NET: Registered protocol family 17
- Registering the dns_resolver key type
- Freeing unused kernel memory: 524k freed
- Write protecting the kernel read-only data: 8192k
- Freeing unused kernel memory: 2000k freed
- Freeing unused kernel memory: 624k freed
- libata version 3.00 loaded.
- Refined TSC clocksource calibration: 2393.913 MHz.
- Switching to clocksource tsc
- psmouse serio4: synaptics: Touchpad model: 1, fw: 7.5, id: 0x1e0b1, caps: 0xd00073/0x240000/0xa0400
- input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio4/input/input1
- ahci 0000:00:1f.2: version 3.0
- ahci 0000:00:1f.2: PCI INT B -> GSI 19 (level, low) -> IRQ 19
- ahci 0000:00:1f.2: irq 40 for MSI/MSI-X
- ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 4 ports 3 Gbps 0x3 impl SATA mode
- ahci 0000:00:1f.2: flags: 64bit ncq sntf ilck pm led clo pio slum part ems apst
- ahci 0000:00:1f.2: setting latency timer to 64
- scsi0 : ahci
- scsi1 : ahci
- scsi2 : ahci
- scsi3 : ahci
- ata1: SATA max UDMA/133 abar m2048@0xb6405000 port 0xb6405100 irq 40
- ata2: SATA max UDMA/133 abar m2048@0xb6405000 port 0xb6405180 irq 40
- ata3: DUMMY
- ata4: DUMMY
- ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
- ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
- ata2.00: ATAPI: hp CDDVDW TS-L633R, 0300, max UDMA/100
- ata2.00: configured for UDMA/100
- ata1.00: ATA-8: ST9320325AS, 0005HPM1, max UDMA/100
- ata1.00: 625142448 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
- ata1.00: configured for UDMA/100
- scsi 0:0:0:0: Direct-Access ATA ST9320325AS 0005 PQ: 0 ANSI: 5
- sd 0:0:0:0: [sda] 625142448 512-byte logical blocks: (320 GB/298 GiB)
- sd 0:0:0:0: [sda] Write Protect is off
- sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
- sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
- scsi 1:0:0:0: CD-ROM hp CDDVDW TS-L633R 0300 PQ: 0 ANSI: 5
- sr0: scsi3-mmc drive: 62x/62x writer dvd-ram cd/rw xa/form2 cdda tray
- cdrom: Uniform CD-ROM driver Revision: 3.20
- sr 1:0:0:0: Attached scsi CD-ROM sr0
- sda: sda1 sda2 sda3 sda4 < sda5 sda6 >
- sd 0:0:0:0: [sda] Attached SCSI disk
- sd 0:0:0:0: Attached scsi generic sg0 type 0
- sr 1:0:0:0: Attached scsi generic sg1 type 5
- scsi: <fdomain> Detection failed (no card)
- GDT-HA: Storage RAID Controller Driver. Version: 3.05
- Fusion MPT base driver 3.04.20
- Copyright (c) 1999-2008 LSI Corporation
- Fusion MPT SPI Host driver 3.04.20
- Fusion MPT FC Host driver 3.04.20
- Fusion MPT SAS Host driver 3.04.20
- 3ware Storage Controller device driver for Linux v1.26.02.003.
- 3ware 9000 Storage Controller device driver for Linux v2.26.02.014.
- Compaq SMART2 Driver (v 2.6.0)
- HP CISS Driver (v 3.6.26)
- Adaptec aacraid driver 1.1-7[28000]-ms
- megaraid cmm: 2.20.2.7 (Release Date: Sun Jul 16 00:01:03 EST 2006)
- megaraid: 2.20.5.1 (Release Date: Thu Nov 16 15:32:35 EST 2006)
- megasas: 00.00.06.12-rc1 Wed. Oct. 5 17:00:00 PDT 2011
- qla2xxx [0000:00:00.0]-0005: : QLogic Fibre Channel HBA Driver: 8.03.07.12-k.
- Emulex LightPulse Fibre Channel SCSI driver 8.3.27
- Copyright(c) 2004-2009 Emulex. All rights reserved.
- aic94xx: Adaptec aic94xx SAS/SATA driver version 1.0.3 loaded
- mpt2sas version 10.100.00.00 loaded
- ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
- ehci_hcd 0000:00:1a.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
- ehci_hcd 0000:00:1a.0: setting latency timer to 64
- ehci_hcd 0000:00:1a.0: EHCI Host Controller
- ehci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 1
- ehci_hcd 0000:00:1a.0: debug port 2
- ehci_hcd 0000:00:1a.0: cache line size of 64 is not supported
- ehci_hcd 0000:00:1a.0: irq 16, io mem 0xb6405c00
- ehci_hcd 0000:00:1a.0: USB 2.0 started, EHCI 1.00
- usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
- usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
- usb usb1: Product: EHCI Host Controller
- usb usb1: Manufacturer: Linux 3.2.12-gentoo ehci_hcd
- usb usb1: SerialNumber: 0000:00:1a.0
- hub 1-0:1.0: USB hub found
- hub 1-0:1.0: 3 ports detected
- ehci_hcd 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23
- ehci_hcd 0000:00:1d.0: setting latency timer to 64
- ehci_hcd 0000:00:1d.0: EHCI Host Controller
- ehci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2
- ehci_hcd 0000:00:1d.0: debug port 2
- ehci_hcd 0000:00:1d.0: cache line size of 64 is not supported
- ehci_hcd 0000:00:1d.0: irq 23, io mem 0xb6405800
- ehci_hcd 0000:00:1d.0: USB 2.0 started, EHCI 1.00
- usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
- usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
- usb usb2: Product: EHCI Host Controller
- usb usb2: Manufacturer: Linux 3.2.12-gentoo ehci_hcd
- usb usb2: SerialNumber: 0000:00:1d.0
- hub 2-0:1.0: USB hub found
- hub 2-0:1.0: 3 ports detected
- Initializing USB Mass Storage driver...
- usbcore: registered new interface driver usb-storage
- USB Mass Storage support registered.
- uhci_hcd: USB Universal Host Controller Interface driver
- ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
- sl811: driver sl811-hcd, 19 May 2005
- usb 1-1: new high-speed USB device number 2 using ehci_hcd
- usb 1-1: New USB device found, idVendor=8087, idProduct=0020
- usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
- hub 1-1:1.0: USB hub found
- hub 1-1:1.0: 6 ports detected
- usb 2-1: new high-speed USB device number 2 using ehci_hcd
- usb 2-1: New USB device found, idVendor=8087, idProduct=0020
- usb 2-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
- hub 2-1:1.0: USB hub found
- hub 2-1:1.0: 8 ports detected
- device-mapper: uevent: version 1.0.3
- device-mapper: ioctl: 4.22.0-ioctl (2011-10-19) initialised: dm-devel@redhat.com
- usb 2-1.6: new high-speed USB device number 3 using ehci_hcd
- usb 2-1.6: New USB device found, idVendor=04f2, idProduct=b249
- usb 2-1.6: New USB device strings: Mfr=2, Product=1, SerialNumber=3
- usb 2-1.6: Product: HP Webcam-101
- usb 2-1.6: Manufacturer: Chicony Electronics Co., Ltd.
- usb 2-1.6: SerialNumber: SN0001
- md: raid0 personality registered for level 0
- md: raid1 personality registered for level 1
- raid6: int64x1 2421 MB/s
- raid6: int64x2 2358 MB/s
- raid6: int64x4 2048 MB/s
- raid6: int64x8 1578 MB/s
- raid6: sse2x1 5871 MB/s
- raid6: sse2x2 6845 MB/s
- raid6: sse2x4 7878 MB/s
- raid6: using algorithm sse2x4 (7878 MB/s)
- async_tx: api initialized (async)
- xor: automatically using best checksumming function: generic_sse
- generic_sse: 9089.600 MB/sec
- xor: using function: generic_sse (9089.600 MB/sec)
- md: raid6 personality registered for level 6
- md: raid5 personality registered for level 5
- md: raid4 personality registered for level 4
- md: raid10 personality registered for level 10
- Btrfs loaded
- JFS: nTxBlock = 8192, nTxLock = 65536
- fuse init (API version 7.17)
- e1000: Intel(R) PRO/1000 Network Driver - version 7.3.21-k8-NAPI
- e1000: Copyright (c) 1999-2006 Intel Corporation.
- ISO 9660 Extensions: Microsoft Joliet Level 3
- ISO 9660 Extensions: RRIP_1991A
- udev[19908]: starting version 164
- wmi: Mapper loaded
- input: Lid Switch as /devices/LNXSYSTM:00/device:00/PNP0C0D:00/input/input2
- ACPI: Lid Switch [LID0]
- input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input3
- ACPI: Power Button [PWRB]
- input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input4
- ACPI: Power Button [PWRF]
- ACPI: AC Adapter [AC] (on-line)
- r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
- r8169 0000:01:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
- r8169 0000:01:00.0: setting latency timer to 64
- r8169 0000:01:00.0: irq 41 for MSI/MSI-X
- r8169 0000:01:00.0: eth0: RTL8105e at 0xffffc900100fe000, 78:e3:b5:4f:99:30, XID 00a00000 IRQ 41
- Real Time Clock Driver v1.12b
- ACPI: Battery Slot [BAT0] (battery present)
- Monitor-Mwait will be used to enter C-1 state
- Monitor-Mwait will be used to enter C-3 state
- ACPI: acpi_idle registered with cpuidle
- thermal LNXTHERM:00: registered as thermal_zone0
- ACPI: Thermal Zone [TZ00] (45 C)
- thermal LNXTHERM:01: registered as thermal_zone1
- ACPI: Thermal Zone [TZ01] (0 C)
- ACPI: Fan [FAN0] (off)
- acpi device:02: registered as cooling_device5
- input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A08:00/LNXVIDEO:00/input/input5
- ACPI: Video Device [GFX0] (multi-head: yes rom: no post: no)
- input: HP WMI hotkeys as /devices/virtual/input/input6
- snd_hda_intel 0000:00:1b.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22
- snd_hda_intel 0000:00:1b.0: irq 42 for MSI/MSI-X
- snd_hda_intel 0000:00:1b.0: setting latency timer to 64
- HDMI status: Codec=3 Pin=6 Presence_Detect=0 ELD_Valid=0
- mdadm: sending ioctl 1261 to a partition!
- mdadm: sending ioctl 1261 to a partition!
- mdadm: sending ioctl 1261 to a partition!
- mdadm: sending ioctl 1261 to a partition!
- mdadm: sending ioctl 1261 to a partition!
- mdadm: sending ioctl 1261 to a partition!
- mdadm: sending ioctl 1261 to a partition!
- mdadm: sending ioctl 1261 to a partition!
- mdadm: sending ioctl 800c0910 to a partition!
- mdadm: sending ioctl 800c0910 to a partition!
- warning: process `hwsetup' used the deprecated sysctl system call with 1.23.
- NET: Registered protocol family 10
- Adding 8388604k swap on /dev/sda5. Priority:-1 extents:1 across:8388604k
- kjournald starting. Commit interval 5 seconds
- EXT3-fs (sda6): using internal journal
- EXT3-fs (sda6): mounted filesystem with writeback data mode
- kjournald starting. Commit interval 5 seconds
- EXT3-fs (sda3): using internal journal
- EXT3-fs (sda3): mounted filesystem with writeback data mode
- r8169 0000:01:00.0: eth0: unable to load firmware patch rtl_nic/rtl8105e-1.fw (-2)
- r8169 0000:01:00.0: eth0: link down
- r8169 0000:01:00.0: eth0: link down
- ADDRCONF(NETDEV_UP): eth0: link is not ready
- r8169 0000:01:00.0: eth0: link up
- ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
- eth0: no IPv6 routers present
- r8169 0000:01:00.0: eth0: link down
- r8169 0000:01:00.0: eth0: link up
Add Comment
Please, Sign In to add comment