%
(Header)
(Generated by gcodetools from Inkscape.)
(Using default header. To add your own header create file "header" in the output dir.)
M3
(Header end.)
G21 (All units in mm)

(Pass at depth -1.0)
(Start cutting path id: path135)
(Change tool to Default tool)

G00 Z5.000000
G00 X9990.343114 Y2015.873365

G01 Z-0.125000 F100.0(Penetrate)
G01 X9990.343114 Y1996.673365 Z-0.125000 F400.000000
G00 Z5.000000

(End cutting path id: path135)

(Start cutting path id: path133)
(Change tool to Default tool)

G00 Z5.000000
G00 X9951.943114 Y2054.273365

G01 Z-0.125000 F100.0(Penetrate)
G01 X9500.743114 Y2054.273365 Z-0.125000 F400.000000
G00 Z5.000000

(End cutting path id: path133)

(Start cutting path id: path131)
(Change tool to Default tool)

G00 Z5.000000
G00 X9462.343114 Y2015.873365

G01 Z-0.125000 F100.0(Penetrate)
G01 X9462.343114 Y1996.673365 Z-0.125000 F400.000000
G00 Z5.000000

(End cutting path id: path131)

(Start cutting path id: path129)
(Change tool to Default tool)

G00 Z5.000000
G00 X9951.943114 Y1958.273365

G01 Z-0.125000 F100.0(Penetrate)
G01 X9500.743114 Y1958.273365 Z-0.125000 F400.000000
G00 Z5.000000

(End cutting path id: path129)

(Start cutting path id: path127)
(Change tool to Default tool)

G00 Z5.000000
G00 X9512.051460 Y2006.273365

G01 Z-0.125000 F100.0(Penetrate)
G03 X9510.379457 Y2012.513365 Z-0.125000 I-12.480000 J-0.000000 F400.000000
G03 X9505.811460 Y2017.081362 Z-0.125000 I-10.807997 J-6.240000
G03 X9499.571460 Y2018.753365 Z-0.125000 I-6.240000 J-10.807997
G03 X9493.331460 Y2017.081362 Z-0.125000 I0.000000 J-12.480000
G03 X9488.763463 Y2012.513365 Z-0.125000 I6.240000 J-10.807997
G03 X9487.091460 Y2006.273365 Z-0.125000 I10.807997 J-6.240000
G03 X9488.763463 Y2000.033365 Z-0.125000 I12.480000 J0.000000
G03 X9493.331460 Y1995.465368 Z-0.125000 I10.807997 J6.240000
G03 X9499.571460 Y1993.793365 Z-0.125000 I6.240000 J10.807997
G03 X9505.811460 Y1995.465368 Z-0.125000 I-0.000000 J12.480000
G03 X9510.379457 Y2000.033365 Z-0.125000 I-6.240000 J10.807997
G03 X9512.051460 Y2006.273365 Z-0.125000 I-10.807997 J6.240000
G01 X9512.051460 Y2006.273365 Z-0.125000
G00 Z5.000000

(End cutting path id: path127)

(Start cutting path id: path125)
(Change tool to Default tool)

G00 Z5.000000
G00 X9965.594767 Y2006.273365

G01 Z-0.125000 F100.0(Penetrate)
G03 X9963.922764 Y2012.513365 Z-0.125000 I-12.480000 J0.000000 F400.000000
G03 X9959.354767 Y2017.081362 Z-0.125000 I-10.807997 J-6.240000
G03 X9953.114767 Y2018.753365 Z-0.125000 I-6.240000 J-10.807997
G03 X9946.874767 Y2017.081362 Z-0.125000 I-0.000000 J-12.480000
G03 X9942.306770 Y2012.513365 Z-0.125000 I6.240000 J-10.807997
G03 X9940.634767 Y2006.273365 Z-0.125000 I10.807997 J-6.240000
G03 X9942.306770 Y2000.033365 Z-0.125000 I12.480000 J-0.000000
G03 X9946.874767 Y1995.465368 Z-0.125000 I10.807997 J6.240000
G03 X9953.114767 Y1993.793365 Z-0.125000 I6.240000 J10.807997
G03 X9959.354767 Y1995.465368 Z-0.125000 I0.000000 J12.480000
G03 X9963.922764 Y2000.033365 Z-0.125000 I-6.240000 J10.807997
G03 X9965.594767 Y2006.273365 Z-0.125000 I-10.807997 J6.240000
G01 X9965.594767 Y2006.273365 Z-0.125000
G00 Z5.000000

(End cutting path id: path125)

(Start cutting path id: path123)
(Change tool to Default tool)

G00 Z5.000000
G00 X9990.343114 Y2015.873365

G01 Z-0.125000 F100.0(Penetrate)
G03 X9987.420088 Y2030.568409 Z-0.125000 I-38.400000 J0.000000 F400.000000
G03 X9979.096014 Y2043.026265 Z-0.125000 I-35.476974 J-14.695044
G03 X9966.638158 Y2051.350339 Z-0.125000 I-27.152900 J-27.152900
G03 X9951.943114 Y2054.273365 Z-0.125000 I-14.695044 J-35.476974
G00 Z5.000000

(End cutting path id: path123)

(Start cutting path id: path121)
(Change tool to Default tool)

G00 Z5.000000
G00 X9500.743114 Y2054.273365

G01 Z-0.125000 F100.0(Penetrate)
G03 X9486.048070 Y2051.350339 Z-0.125000 I-0.000000 J-38.400000 F400.000000
G03 X9473.590214 Y2043.026265 Z-0.125000 I14.695044 J-35.476974
G03 X9465.266140 Y2030.568409 Z-0.125000 I27.152900 J-27.152900
G03 X9462.343114 Y2015.873365 Z-0.125000 I35.476974 J-14.695044
G00 Z5.000000

(End cutting path id: path121)

(Start cutting path id: path119)
(Change tool to Default tool)

G00 Z5.000000
G00 X9462.343114 Y1996.673365

G01 Z-0.125000 F100.0(Penetrate)
G03 X9465.266140 Y1981.978321 Z-0.125000 I38.400000 J-0.000000 F400.000000
G03 X9473.590214 Y1969.520465 Z-0.125000 I35.476974 J14.695044
G03 X9486.048070 Y1961.196391 Z-0.125000 I27.152900 J27.152900
G03 X9500.743114 Y1958.273365 Z-0.125000 I14.695044 J35.476974
G00 Z5.000000

(End cutting path id: path119)

(Start cutting path id: path117)
(Change tool to Default tool)

G00 Z5.000000
G00 X9951.943114 Y1958.273365

G01 Z-0.125000 F100.0(Penetrate)
G03 X9966.638158 Y1961.196391 Z-0.125000 I0.000000 J38.400000 F400.000000
G03 X9979.096014 Y1969.520465 Z-0.125000 I-14.695044 J35.476974
G03 X9987.420088 Y1981.978321 Z-0.125000 I-27.152900 J27.152900
G03 X9990.343114 Y1996.673365 Z-0.125000 I-35.476974 J14.695044
G00 Z5.000000

(End cutting path id: path117)

(Start cutting path id: path115)
(Change tool to Default tool)

G00 Z5.000000
G00 X10013.900750 Y2321.607266

G01 Z-0.125000 F100.0(Penetrate)
G01 X10013.900750 Y2302.407266 Z-0.125000 F400.000000
G00 Z5.000000

(End cutting path id: path115)

(Start cutting path id: path113)
(Change tool to Default tool)

G00 Z5.000000
G00 X9975.500750 Y2360.007266

G01 Z-0.125000 F100.0(Penetrate)
G01 X9524.300750 Y2360.007266 Z-0.125000 F400.000000
G00 Z5.000000

(End cutting path id: path113)

(Start cutting path id: path111)
(Change tool to Default tool)

G00 Z5.000000
G00 X9485.900750 Y2321.607266

G01 Z-0.125000 F100.0(Penetrate)
G01 X9485.900750 Y2302.407266 Z-0.125000 F400.000000
G00 Z5.000000

(End cutting path id: path111)

(Start cutting path id: path109)
(Change tool to Default tool)

G00 Z5.000000
G00 X9975.500750 Y2264.007266

G01 Z-0.125000 F100.0(Penetrate)
G01 X9524.300750 Y2264.007266 Z-0.125000 F400.000000
G00 Z5.000000

(End cutting path id: path109)

(Start cutting path id: path107)
(Change tool to Default tool)

G00 Z5.000000
G00 X9535.609097 Y2312.007266

G01 Z-0.125000 F100.0(Penetrate)
G03 X9533.937094 Y2318.247266 Z-0.125000 I-12.480000 J0.000000 F400.000000
G03 X9529.369097 Y2322.815263 Z-0.125000 I-10.807997 J-6.240000
G03 X9523.129097 Y2324.487266 Z-0.125000 I-6.240000 J-10.807997
G03 X9516.889097 Y2322.815263 Z-0.125000 I-0.000000 J-12.480000
G03 X9512.321100 Y2318.247266 Z-0.125000 I6.240000 J-10.807997
G03 X9510.649097 Y2312.007266 Z-0.125000 I10.807997 J-6.240000
G03 X9512.321100 Y2305.767266 Z-0.125000 I12.480000 J-0.000000
G03 X9516.889097 Y2301.199269 Z-0.125000 I10.807997 J6.240000
G03 X9523.129097 Y2299.527266 Z-0.125000 I6.240000 J10.807997
G03 X9529.369097 Y2301.199269 Z-0.125000 I0.000000 J12.480000
G03 X9533.937094 Y2305.767266 Z-0.125000 I-6.240000 J10.807997
G03 X9535.609097 Y2312.007266 Z-0.125000 I-10.807997 J6.240000
G01 X9535.609097 Y2312.007266 Z-0.125000
G00 Z5.000000

(End cutting path id: path107)

(Start cutting path id: path105)
(Change tool to Default tool)

G00 Z5.000000
G00 X9989.152404 Y2312.007266

G01 Z-0.125000 F100.0(Penetrate)
G03 X9987.480401 Y2318.247266 Z-0.125000 I-12.480000 J0.000000 F400.000000
G03 X9982.912404 Y2322.815263 Z-0.125000 I-10.807997 J-6.240000
G03 X9976.672404 Y2324.487266 Z-0.125000 I-6.240000 J-10.807997
G03 X9970.432404 Y2322.815263 Z-0.125000 I-0.000000 J-12.480000
G03 X9965.864407 Y2318.247266 Z-0.125000 I6.240000 J-10.807997
G03 X9964.192404 Y2312.007266 Z-0.125000 I10.807997 J-6.240000
G03 X9965.864407 Y2305.767266 Z-0.125000 I12.480000 J-0.000000
G03 X9970.432404 Y2301.199269 Z-0.125000 I10.807997 J6.240000
G03 X9976.672404 Y2299.527266 Z-0.125000 I6.240000 J10.807997
G03 X9982.912404 Y2301.199269 Z-0.125000 I0.000000 J12.480000
G03 X9987.480401 Y2305.767266 Z-0.125000 I-6.240000 J10.807997
G03 X9989.152404 Y2312.007266 Z-0.125000 I-10.807997 J6.240000
G01 X9989.152404 Y2312.007266 Z-0.125000
G00 Z5.000000

(End cutting path id: path105)

(Start cutting path id: path103)
(Change tool to Default tool)

G00 Z5.000000
G00 X10013.900750 Y2321.607266

G01 Z-0.125000 F100.0(Penetrate)
G03 X10010.977724 Y2336.302310 Z-0.125000 I-38.400000 J-0.000000 F400.000000
G03 X10002.653650 Y2348.760166 Z-0.125000 I-35.476974 J-14.695044
G03 X9990.195794 Y2357.084240 Z-0.125000 I-27.152900 J-27.152900
G03 X9975.500750 Y2360.007266 Z-0.125000 I-14.695044 J-35.476974
G00 Z5.000000

(End cutting path id: path103)

(Start cutting path id: path101)
(Change tool to Default tool)

G00 Z5.000000
G00 X9524.300750 Y2360.007266

G01 Z-0.125000 F100.0(Penetrate)
G03 X9509.605706 Y2357.084240 Z-0.125000 I0.000000 J-38.400000 F400.000000
G03 X9497.147850 Y2348.760166 Z-0.125000 I14.695044 J-35.476974
G03 X9488.823776 Y2336.302310 Z-0.125000 I27.152900 J-27.152900
G03 X9485.900750 Y2321.607266 Z-0.125000 I35.476974 J-14.695044
G00 Z5.000000

(End cutting path id: path101)

(Start cutting path id: path99)
(Change tool to Default tool)

G00 Z5.000000
G00 X9485.900750 Y2302.407266

G01 Z-0.125000 F100.0(Penetrate)
G03 X9488.823776 Y2287.712222 Z-0.125000 I38.400000 J-0.000000 F400.000000
G03 X9497.147850 Y2275.254366 Z-0.125000 I35.476974 J14.695044
G03 X9509.605706 Y2266.930292 Z-0.125000 I27.152900 J27.152900
G03 X9524.300750 Y2264.007266 Z-0.125000 I14.695044 J35.476974
G00 Z5.000000

(End cutting path id: path99)

(Start cutting path id: path97)
(Change tool to Default tool)

G00 Z5.000000
G00 X9975.500750 Y2264.007266

G01 Z-0.125000 F100.0(Penetrate)
G03 X9990.195794 Y2266.930292 Z-0.125000 I-0.000000 J38.400000 F400.000000
G03 X10002.653650 Y2275.254366 Z-0.125000 I-14.695044 J35.476974
G03 X10010.977724 Y2287.712222 Z-0.125000 I-27.152900 J27.152900
G03 X10013.900750 Y2302.407266 Z-0.125000 I-35.476974 J14.695044
G00 Z5.000000

(End cutting path id: path97)

(Start cutting path id: path95)
(Change tool to Default tool)

G00 Z5.000000
G00 X7907.773741 Y2758.902138

G01 Z-0.125000 F100.0(Penetrate)
G03 X7906.101738 Y2765.142138 Z-0.125000 I-12.480000 J0.000000 F400.000000
G03 X7901.533741 Y2769.710135 Z-0.125000 I-10.807997 J-6.240000
G03 X7895.293741 Y2771.382138 Z-0.125000 I-6.240000 J-10.807997
G03 X7889.053741 Y2769.710135 Z-0.125000 I-0.000000 J-12.480000
G03 X7884.485744 Y2765.142138 Z-0.125000 I6.240000 J-10.807997
G03 X7882.813741 Y2758.902138 Z-0.125000 I10.807997 J-6.240000
G03 X7884.485744 Y2752.662138 Z-0.125000 I12.480000 J0.000000
G03 X7889.053741 Y2748.094141 Z-0.125000 I10.807997 J6.240000
G03 X7895.293741 Y2746.422138 Z-0.125000 I6.240000 J10.807997
G03 X7901.533741 Y2748.094141 Z-0.125000 I0.000000 J12.480000
G03 X7906.101738 Y2752.662138 Z-0.125000 I-6.240000 J10.807997
G03 X7907.773741 Y2758.902138 Z-0.125000 I-10.807997 J6.240000
G01 X7907.773741 Y2758.902138 Z-0.125000
G00 Z5.000000

(End cutting path id: path95)

(Start cutting path id: path93)
(Change tool to Default tool)

G00 Z5.000000
G00 X8659.609759 Y2758.902138

G01 Z-0.125000 F100.0(Penetrate)
G03 X8657.937756 Y2765.142138 Z-0.125000 I-12.480000 J-0.000000 F400.000000
G03 X8653.369759 Y2769.710135 Z-0.125000 I-10.807997 J-6.240000
G03 X8647.129759 Y2771.382138 Z-0.125000 I-6.240000 J-10.807997
G03 X8640.889759 Y2769.710135 Z-0.125000 I-0.000000 J-12.480000
G03 X8636.321762 Y2765.142138 Z-0.125000 I6.240000 J-10.807997
G03 X8634.649759 Y2758.902138 Z-0.125000 I10.807997 J-6.240000
G03 X8636.321762 Y2752.662138 Z-0.125000 I12.480000 J-0.000000
G03 X8640.889759 Y2748.094141 Z-0.125000 I10.807997 J6.240000
G03 X8647.129759 Y2746.422138 Z-0.125000 I6.240000 J10.807997
G03 X8653.369759 Y2748.094141 Z-0.125000 I0.000000 J12.480000
G03 X8657.937756 Y2752.662138 Z-0.125000 I-6.240000 J10.807997
G03 X8659.609759 Y2758.902138 Z-0.125000 I-10.807997 J6.240000
G01 X8659.609759 Y2758.902138 Z-0.125000
G00 Z5.000000

(End cutting path id: path93)

(Start cutting path id: path91)
(Change tool to Default tool)

G00 Z5.000000
G00 X8980.313307 Y3079.605686

G01 Z-0.125000 F100.0(Penetrate)
G03 X8978.641304 Y3085.845686 Z-0.125000 I-12.480000 J0.000000 F400.000000
G03 X8974.073307 Y3090.413683 Z-0.125000 I-10.807997 J-6.240000
G03 X8967.833307 Y3092.085686 Z-0.125000 I-6.240000 J-10.807997
G03 X8961.593307 Y3090.413683 Z-0.125000 I-0.000000 J-12.480000
G03 X8957.025310 Y3085.845686 Z-0.125000 I6.240000 J-10.807997
G03 X8955.353307 Y3079.605686 Z-0.125000 I10.807997 J-6.240000
G03 X8957.025310 Y3073.365686 Z-0.125000 I12.480000 J-0.000000
G03 X8961.593307 Y3068.797689 Z-0.125000 I10.807997 J6.240000
G03 X8967.833307 Y3067.125686 Z-0.125000 I6.240000 J10.807997
G03 X8974.073307 Y3068.797689 Z-0.125000 I0.000000 J12.480000
G03 X8978.641304 Y3073.365686 Z-0.125000 I-6.240000 J10.807997
G03 X8980.313307 Y3079.605686 Z-0.125000 I-10.807997 J6.240000
G01 X8980.313307 Y3079.605686 Z-0.125000
G00 Z5.000000

(End cutting path id: path91)

(Start cutting path id: path89)
(Change tool to Default tool)

G00 Z5.000000
G00 X7587.070193 Y3079.605686

G01 Z-0.125000 F100.0(Penetrate)
G03 X7585.398191 Y3085.845688 Z-0.125000 I-12.480000 J0.000004 F400.000000
G03 X7580.830194 Y3090.413687 Z-0.125000 I-10.807998 J-6.239998
G03 X7574.590193 Y3092.085690 Z-0.125000 I-6.240001 J-10.807996
G03 X7568.350192 Y3090.413687 Z-0.125000 I-0.000000 J-12.480000
G03 X7563.782195 Y3085.845688 Z-0.125000 I6.240001 J-10.807996
G03 X7562.110193 Y3079.605686 Z-0.125000 I10.807998 J-6.239998
G03 X7563.782196 Y3073.365686 Z-0.125000 I12.480000 J-0.000000
G03 X7568.350193 Y3068.797689 Z-0.125000 I10.807997 J6.240000
G03 X7574.590193 Y3067.125686 Z-0.125000 I6.240000 J10.807997
G03 X7580.830193 Y3068.797689 Z-0.125000 I0.000000 J12.480000
G03 X7585.398190 Y3073.365686 Z-0.125000 I-6.240000 J10.807997
G03 X7587.070193 Y3079.605686 Z-0.125000 I-10.807997 J6.240000
G01 X7587.070193 Y3079.605686 Z-0.125000
G00 Z5.000000

(End cutting path id: path89)

(Start cutting path id: path87)
(Change tool to Default tool)

G00 Z5.000000
G00 X8849.097739 Y3223.349237

G01 Z-0.125000 F100.0(Penetrate)
G03 X8845.806394 Y3235.632702 Z-0.125000 I-24.566929 J-0.000000 F400.000000
G03 X8836.814274 Y3244.624822 Z-0.125000 I-21.275585 J-12.283464
G03 X8824.530810 Y3247.916166 Z-0.125000 I-12.283464 J-21.275585
G03 X8812.247345 Y3244.624822 Z-0.125000 I-0.000000 J-24.566929
G03 X8803.255225 Y3235.632702 Z-0.125000 I12.283464 J-21.275584
G03 X8799.963881 Y3223.349237 Z-0.125000 I21.275584 J-12.283464
G03 X8803.255225 Y3211.065773 Z-0.125000 I24.566929 J0.000000
G03 X8812.247345 Y3202.073652 Z-0.125000 I21.275585 J12.283465
G03 X8824.530810 Y3198.782308 Z-0.125000 I12.283464 J21.275585
G03 X8836.814274 Y3202.073652 Z-0.125000 I0.000000 J24.566929
G03 X8845.806394 Y3211.065773 Z-0.125000 I-12.283465 J21.275585
G03 X8849.097739 Y3223.349237 Z-0.125000 I-21.275585 J12.283465
G01 X8849.097739 Y3223.349237 Z-0.125000
G00 Z5.000000

(End cutting path id: path87)

(Start cutting path id: path85)
(Change tool to Default tool)

G00 Z5.000000
G00 X8295.778679 Y4050.799285

G01 Z-0.125000 F100.0(Penetrate)
G03 X8292.487337 Y4063.082752 Z-0.125000 I-24.566929 J0.000006 F400.000000
G03 X8283.495216 Y4072.074875 Z-0.125000 I-21.275587 J-12.283461
G03 X8271.211750 Y4075.366220 Z-0.125000 I-12.283466 J-21.275584
G03 X8258.928284 Y4072.074875 Z-0.125000 I-0.000000 J-24.566929
G03 X8249.936163 Y4063.082752 Z-0.125000 I12.283466 J-21.275584
G03 X8246.644821 Y4050.799285 Z-0.125000 I21.275587 J-12.283461
G03 X8249.936163 Y4038.515818 Z-0.125000 I24.566929 J-0.000006
G03 X8258.928284 Y4029.523696 Z-0.125000 I21.275587 J12.283461
G03 X8271.211750 Y4026.232350 Z-0.125000 I12.283466 J21.275584
G03 X8283.495216 Y4029.523696 Z-0.125000 I0.000000 J24.566929
G03 X8292.487337 Y4038.515818 Z-0.125000 I-12.283466 J21.275584
G03 X8295.778679 Y4050.799285 Z-0.125000 I-21.275587 J12.283461
G01 X8295.778679 Y4050.799285 Z-0.125000
G00 Z5.000000

(End cutting path id: path85)

(Start cutting path id: path83)
(Change tool to Default tool)

G00 Z5.000000
G00 X7742.459620 Y3223.349237

G01 Z-0.125000 F100.0(Penetrate)
G03 X7739.168276 Y3235.632702 Z-0.125000 I-24.566929 J-0.000000 F400.000000
G03 X7730.176156 Y3244.624822 Z-0.125000 I-21.275585 J-12.283464
G03 X7717.892691 Y3247.916166 Z-0.125000 I-12.283465 J-21.275585
G03 X7705.609227 Y3244.624822 Z-0.125000 I0.000000 J-24.566929
G03 X7696.617106 Y3235.632702 Z-0.125000 I12.283464 J-21.275585
G03 X7693.325762 Y3223.349237 Z-0.125000 I21.275585 J-12.283465
G03 X7696.617106 Y3211.065773 Z-0.125000 I24.566929 J-0.000000
G03 X7705.609227 Y3202.073652 Z-0.125000 I21.275585 J12.283464
G03 X7717.892691 Y3198.782308 Z-0.125000 I12.283464 J21.275585
G03 X7730.176156 Y3202.073652 Z-0.125000 I-0.000000 J24.566929
G03 X7739.168276 Y3211.065773 Z-0.125000 I-12.283465 J21.275585
G03 X7742.459620 Y3223.349237 Z-0.125000 I-21.275585 J12.283464
G01 X7742.459620 Y3223.349237 Z-0.125000
G00 Z5.000000

(End cutting path id: path83)

(Start cutting path id: path81)
(Change tool to Default tool)

G00 Z5.000000
G00 X9003.833307 Y3079.605686

G01 Z-0.125000 F100.0(Penetrate)
G03 X8999.010222 Y3097.605686 Z-0.125000 I-36.000000 J-0.000000 F400.000000
G03 X8985.833307 Y3110.782601 Z-0.125000 I-31.176915 J-18.000000
G03 X8967.833307 Y3115.605686 Z-0.125000 I-18.000000 J-31.176915
G03 X8949.833307 Y3110.782601 Z-0.125000 I0.000000 J-36.000000
G03 X8936.656392 Y3097.605686 Z-0.125000 I18.000000 J-31.176915
G03 X8931.833307 Y3079.605686 Z-0.125000 I31.176915 J-18.000000
G03 X8936.656392 Y3061.605686 Z-0.125000 I36.000000 J0.000000
G03 X8949.833307 Y3048.428772 Z-0.125000 I31.176915 J18.000000
G03 X8967.833307 Y3043.605686 Z-0.125000 I18.000000 J31.176915
G03 X8985.833307 Y3048.428772 Z-0.125000 I0.000000 J36.000000
G03 X8999.010222 Y3061.605686 Z-0.125000 I-18.000000 J31.176915
G03 X9003.833307 Y3079.605686 Z-0.125000 I-31.176915 J18.000000
G01 X9003.833307 Y3079.605686 Z-0.125000
G00 Z5.000000

(End cutting path id: path81)

(Start cutting path id: path79)
(Change tool to Default tool)

G00 Z5.000000
G00 X8683.129759 Y2758.902138

G01 Z-0.125000 F100.0(Penetrate)
G03 X8678.306674 Y2776.902138 Z-0.125000 I-36.000000 J0.000000 F400.000000
G03 X8665.129759 Y2790.079053 Z-0.125000 I-31.176915 J-18.000000
G03 X8647.129759 Y2794.902138 Z-0.125000 I-18.000000 J-31.176915
G03 X8629.129759 Y2790.079053 Z-0.125000 I0.000000 J-36.000000
G03 X8615.952844 Y2776.902138 Z-0.125000 I18.000000 J-31.176915
G03 X8611.129759 Y2758.902138 Z-0.125000 I31.176915 J-18.000000
G03 X8615.952844 Y2740.902138 Z-0.125000 I36.000000 J0.000000
G03 X8629.129759 Y2727.725224 Z-0.125000 I31.176915 J18.000000
G03 X8647.129759 Y2722.902138 Z-0.125000 I18.000000 J31.176915
G03 X8665.129759 Y2727.725224 Z-0.125000 I-0.000000 J36.000000
G03 X8678.306674 Y2740.902138 Z-0.125000 I-18.000000 J31.176915
G03 X8683.129759 Y2758.902138 Z-0.125000 I-31.176915 J18.000000
G01 X8683.129759 Y2758.902138 Z-0.125000
G00 Z5.000000

(End cutting path id: path79)

(Start cutting path id: path77)
(Change tool to Default tool)

G00 Z5.000000
G00 X7610.590193 Y3079.605686

G01 Z-0.125000 F100.0(Penetrate)
G03 X7605.767108 Y3097.605686 Z-0.125000 I-36.000000 J0.000000 F400.000000
G03 X7592.590193 Y3110.782601 Z-0.125000 I-31.176915 J-18.000000
G03 X7574.590193 Y3115.605686 Z-0.125000 I-18.000000 J-31.176915
G03 X7556.590193 Y3110.782601 Z-0.125000 I0.000000 J-36.000000
G03 X7543.413278 Y3097.605686 Z-0.125000 I18.000000 J-31.176915
G03 X7538.590193 Y3079.605686 Z-0.125000 I31.176915 J-18.000000
G03 X7543.413278 Y3061.605686 Z-0.125000 I36.000000 J-0.000000
G03 X7556.590193 Y3048.428772 Z-0.125000 I31.176915 J18.000000
G03 X7574.590193 Y3043.605686 Z-0.125000 I18.000000 J31.176915
G03 X7592.590193 Y3048.428772 Z-0.125000 I0.000000 J36.000000
G03 X7605.767108 Y3061.605686 Z-0.125000 I-18.000000 J31.176915
G03 X7610.590193 Y3079.605686 Z-0.125000 I-31.176915 J18.000000
G01 X7610.590193 Y3079.605686 Z-0.125000
G00 Z5.000000

(End cutting path id: path77)

(Start cutting path id: path75)
(Change tool to Default tool)

G00 Z5.000000
G00 X7931.293741 Y2758.902138

G01 Z-0.125000 F100.0(Penetrate)
G03 X7926.470656 Y2776.902138 Z-0.125000 I-36.000000 J0.000000 F400.000000
G03 X7913.293741 Y2790.079053 Z-0.125000 I-31.176915 J-18.000000
G03 X7895.293741 Y2794.902138 Z-0.125000 I-18.000000 J-31.176915
G03 X7877.293741 Y2790.079053 Z-0.125000 I0.000000 J-36.000000
G03 X7864.116826 Y2776.902138 Z-0.125000 I18.000000 J-31.176915
G03 X7859.293741 Y2758.902138 Z-0.125000 I31.176915 J-18.000000
G03 X7864.116826 Y2740.902138 Z-0.125000 I36.000000 J-0.000000
G03 X7877.293741 Y2727.725224 Z-0.125000 I31.176915 J18.000000
G03 X7895.293741 Y2722.902138 Z-0.125000 I18.000000 J31.176915
G03 X7913.293741 Y2727.725224 Z-0.125000 I-0.000000 J36.000000
G03 X7926.470656 Y2740.902138 Z-0.125000 I-18.000000 J31.176915
G03 X7931.293741 Y2758.902138 Z-0.125000 I-31.176915 J18.000000
G01 X7931.293741 Y2758.902138 Z-0.125000
G00 Z5.000000

(End cutting path id: path75)

(Start cutting path id: path73)
(Change tool to Default tool)

G00 Z5.000000
G00 X8415.211750 Y3455.523695

G01 Z-0.125000 F100.0(Penetrate)
G03 X8395.919408 Y3527.523695 Z-0.125000 I-144.000000 J0.000000 F400.000000
G03 X8343.211750 Y3580.231353 Z-0.125000 I-124.707658 J-72.000000
G03 X8271.211750 Y3599.523695 Z-0.125000 I-72.000000 J-124.707658
G03 X8199.211750 Y3580.231353 Z-0.125000 I0.000000 J-144.000000
G03 X8146.504092 Y3527.523695 Z-0.125000 I72.000000 J-124.707658
G03 X8127.211750 Y3455.523695 Z-0.125000 I124.707658 J-72.000000
G03 X8146.504092 Y3383.523695 Z-0.125000 I144.000000 J0.000000
G03 X8199.211750 Y3330.816037 Z-0.125000 I124.707658 J72.000000
G03 X8271.211750 Y3311.523695 Z-0.125000 I72.000000 J124.707658
G03 X8343.211750 Y3330.816037 Z-0.125000 I0.000000 J144.000000
G03 X8395.919408 Y3383.523695 Z-0.125000 I-72.000000 J124.707658
G03 X8415.211750 Y3455.523695 Z-0.125000 I-124.707658 J72.000000
G01 X8415.211750 Y3455.523695 Z-0.125000
G00 Z5.000000

(End cutting path id: path73)

(Start cutting path id: path71)
(Change tool to Default tool)

G00 Z5.000000
G00 X9135.211750 Y3455.523695

G01 Z-0.125000 F100.0(Penetrate)
G03 X9019.457699 Y3887.523695 Z-0.125000 I-864.000000 J0.000000 F400.000000
G03 X8703.211750 Y4203.769644 Z-0.125000 I-748.245949 J-432.000000
G03 X8271.211750 Y4319.523695 Z-0.125000 I-432.000000 J-748.245949
G03 X7839.211750 Y4203.769644 Z-0.125000 I-0.000000 J-864.000000
G03 X7522.965801 Y3887.523695 Z-0.125000 I432.000000 J-748.245949
G03 X7407.211750 Y3455.523695 Z-0.125000 I748.245949 J-432.000000
G03 X7522.965801 Y3023.523695 Z-0.125000 I864.000000 J-0.000000
G03 X7839.211750 Y2707.277746 Z-0.125000 I748.245949 J432.000000
G03 X8271.211750 Y2591.523695 Z-0.125000 I432.000000 J748.245949
G03 X8703.211750 Y2707.277746 Z-0.125000 I0.000000 J864.000000
G03 X9019.457699 Y3023.523695 Z-0.125000 I-432.000000 J748.245949
G03 X9135.211750 Y3455.523695 Z-0.125000 I-748.245949 J432.000000
G01 X9135.211750 Y3455.523695 Z-0.125000
G00 Z5.000000

(End cutting path id: path71)


(Footer)
M5
G00 X0.0000 Y0.0000
M2
(Using default footer. To add your own footer create file "footer" in the output dir.)
(end)
%