API tools faq
paste
Advertisement
ponce

controller info

ponce
Jul 21st, 2014
393
0
Never
Add comment
Not a member of Pastebin yet? Sign Up, it unlocks many cool features!
text 10.14 KB | None | 0 0
raw download clone embed print report
  1. # megacli -AdpAllInfo -aALL
  2.  
  3. Adapter #0
  4.  
  5. ==============================================================================
  6. Versions
  7. ================
  8. Product Name : Supermicro SMC2108
  9. Serial No :
  10. FW Package Build: 12.12.0-0124
  11.  
  12. Mfg. Data
  13. ================
  14. Mfg. Date : 00/00/00
  15. Rework Date : 00/00/00
  16. Revision No :
  17. Battery FRU : N/A
  18.  
  19. Image Versions in Flash:
  20. ================
  21. FW Version : 2.130.363-1846
  22. BIOS Version : 3.25.00_4.12.05.00_0x05180000
  23. Preboot CLI Version: 04.04-020:#%00009
  24. WebBIOS Version : 6.0-51-e_47-Rel
  25. NVDATA Version : 2.09.03-0039
  26. Boot Block Version : 2.02.00.00-0000
  27. BOOT Version : 09.250.01.219
  28.  
  29. Pending Images in Flash
  30. ================
  31. None
  32.  
  33. PCI Info
  34. ================
  35. Controller Id : 0000
  36. Vendor Id : 1000
  37. Device Id : 0079
  38. SubVendorId : 15d9
  39. SubDeviceId : 0700
  40.  
  41. Host Interface : PCIE
  42.  
  43. ChipRevision : B4
  44.  
  45. Link Speed : 0
  46. Number of Frontend Port: 0
  47. Device Interface : PCIE
  48.  
  49. Number of Backend Port: 8
  50. Port : Address
  51. 0 5003048001355d3f
  52. 1 0000000000000000
  53. 2 0000000000000000
  54. 3 0000000000000000
  55. 4 0000000000000000
  56. 5 0000000000000000
  57. 6 0000000000000000
  58. 7 0000000000000000
  59.  
  60. HW Configuration
  61. ================
  62. SAS Address : 5003048014fcf200
  63. BBU : Absent
  64. Alarm : Present
  65. NVRAM : Present
  66. Serial Debugger : Present
  67. Memory : Present
  68. Flash : Present
  69. Memory Size : 512MB
  70. TPM : Absent
  71. On board Expander: Absent
  72. Upgrade Key : Absent
  73. Temperature sensor for ROC : Absent
  74. Temperature sensor for controller : Absent
  75.  
  76. Settings
  77. ================
  78. Current Time : 16:5:21 7/21, 2014
  79. Predictive Fail Poll Interval : 300sec
  80. Interrupt Throttle Active Count : 16
  81. Interrupt Throttle Completion : 50us
  82. Rebuild Rate : 30%
  83. PR Rate : 30%
  84. BGI Rate : 30%
  85. Check Consistency Rate : 30%
  86. Reconstruction Rate : 30%
  87. Cache Flush Interval : 4s
  88. Max Drives to Spinup at One Time : 4
  89. Delay Among Spinup Groups : 2s
  90. Physical Drive Coercion Mode : 1GB
  91. Cluster Mode : Disabled
  92. Alarm : Enabled
  93. Auto Rebuild : Enabled
  94. Battery Warning : Disabled
  95. Ecc Bucket Size : 15
  96. Ecc Bucket Leak Rate : 1440 Minutes
  97. Restore HotSpare on Insertion : Disabled
  98. Expose Enclosure Devices : Enabled
  99. Maintain PD Fail History : Disabled
  100. Host Request Reordering : Enabled
  101. Auto Detect BackPlane Enabled : SGPIO/i2c SEP
  102. Load Balance Mode : Auto
  103. Use FDE Only : No
  104. Security Key Assigned : No
  105. Security Key Failed : No
  106. Security Key Not Backedup : No
  107. Default LD PowerSave Policy : Controller Defined
  108. Maximum number of direct attached drives to spin up in 1 min : 120
  109. Auto Enhanced Import : No
  110. Any Offline VD Cache Preserved : No
  111. Allow Boot with Preserved Cache : No
  112. Disable Online Controller Reset : No
  113. PFK in NVRAM : No
  114. Use disk activity for locate : No
  115. POST delay : 90 seconds
  116. BIOS Error Handling : Stop On Errors
  117. Current Boot Mode :Normal
  118. Capabilities
  119. ================
  120. RAID Level Supported : RAID0, RAID1, RAID5, RAID6, RAID00, RAID10, RAID50, RAID60, PRL 11, PRL 11 with spanning, SRL 3 supported, PRL11-RLQ0 DDF layout with no span, PRL11-RLQ0 DDF layout with span
  121. Supported Drives : SAS, SATA
  122.  
  123. Allowed Mixing:
  124.  
  125. Mix in Enclosure Allowed
  126. Mix of SAS/SATA of HDD type in VD Allowed
  127. Mix of SAS/SATA of SSD type in VD Allowed
  128. Mix of SSD/HDD in VD Allowed
  129.  
  130. Status
  131. ================
  132. ECC Bucket Count : 0
  133.  
  134. Limitations
  135. ================
  136. Max Arms Per VD : 32
  137. Max Spans Per VD : 8
  138. Max Arrays : 128
  139. Max Number of VDs : 64
  140. Max Parallel Commands : 1008
  141. Max SGE Count : 80
  142. Max Data Transfer Size : 8192 sectors
  143. Max Strips PerIO : 42
  144. Max LD per array : 16
  145. Min Strip Size : 8 KB
  146. Max Strip Size : 1.0 MB
  147. Max Configurable CacheCade Size: 0 GB
  148. Current Size of CacheCade : 0GB
  149. Current Size of FW Cache : 346 MB
  150.  
  151. Device Present
  152. ================
  153. Virtual Drives : 3
  154. Degraded : 0
  155. Offline : 0
  156. Physical Devices : 18
  157. Disks : 16
  158. Critical Disks : 0
  159. Failed Disks : 0
  160.  
  161. Supported Adapter Operations
  162. ================
  163. Rebuild Rate : Yes
  164. CC Rate : Yes
  165. BGI Rate : Yes
  166. Reconstruct Rate : Yes
  167. Patrol Read Rate : Yes
  168. Alarm Control : Yes
  169. Cluster Support : No
  170. BBU : Yes
  171. Spanning : Yes
  172. Dedicated Hot Spare : Yes
  173. Revertible Hot Spares : Yes
  174. Foreign Config Import : Yes
  175. Self Diagnostic : Yes
  176. Allow Mixed Redundancy on Array : No
  177. Global Hot Spares : Yes
  178. Deny SCSI Passthrough : No
  179. Deny SMP Passthrough : No
  180. Deny STP Passthrough : No
  181. Support Security : No
  182. Snapshot Enabled : No
  183. Support the OCE without adding drives : Yes
  184. Support PFK : Yes
  185. Support PI : No
  186. Support Boot Time PFK Change : No
  187. Disable Online PFK Change : No
  188. PFK TrailTime Remaining : 0 days 0 hours
  189. Support Shield State : No
  190. Block SSD Write Disk Cache Change: No
  191.  
  192. Supported VD Operations
  193. ================
  194. Read Policy : Yes
  195. Write Policy : Yes
  196. IO Policy : Yes
  197. Access Policy : Yes
  198. Disk Cache Policy : Yes
  199. Reconstruction : Yes
  200. Deny Locate : No
  201. Deny CC : No
  202. Allow Ctrl Encryption: No
  203. Enable LDBBM : Yes
  204. Support Breakmirror : No
  205. Power Savings : No
  206.  
  207. Supported PD Operations
  208. ================
  209. Force Online : Yes
  210. Force Offline : Yes
  211. Force Rebuild : Yes
  212. Deny Force Failed : No
  213. Deny Force Good/Bad : No
  214. Deny Missing Replace : No
  215. Deny Clear : No
  216. Deny Locate : No
  217. Support Temperature : Yes
  218. NCQ : No
  219. Disable Copyback : No
  220. Enable JBOD : No
  221. Enable Copyback on SMART : No
  222. Enable Copyback to SSD on SMART Error : Yes
  223. Enable SSD Patrol Read : No
  224. PR Correct Unconfigured Areas : Yes
  225. Enable Spin Down of UnConfigured Drives : Yes
  226. Disable Spin Down of hot spares : No
  227. Spin Down time : 30
  228. T10 Power State : No
  229. Error Counters
  230. ================
  231. Memory Correctable Errors : 0
  232. Memory Uncorrectable Errors : 0
  233.  
  234. Cluster Information
  235. ================
  236. Cluster Permitted : No
  237. Cluster Active : No
  238.  
  239. Default Settings
  240. ================
  241. Phy Polarity : 0
  242. Phy PolaritySplit : 0
  243. Background Rate : 30
  244. Strip Size : 64kB
  245. Flush Time : 4 seconds
  246. Write Policy : WB
  247. Read Policy : Adaptive
  248. Cache When BBU Bad : Enabled
  249. Cached IO : Yes
  250. SMART Mode : Mode 6
  251. Alarm Disable : Yes
  252. Coercion Mode : 1GB
  253. ZCR Config : Unknown
  254. Dirty LED Shows Drive Activity : No
  255. BIOS Continue on Error : 0
  256. Spin Down Mode : None
  257. Allowed Device Type : SAS/SATA Mix
  258. Allow Mix in Enclosure : Yes
  259. Allow HDD SAS/SATA Mix in VD : Yes
  260. Allow SSD SAS/SATA Mix in VD : Yes
  261. Allow HDD/SSD Mix in VD : Yes
  262. Allow SATA in Cluster : No
  263. Max Chained Enclosures : 16
  264. Disable Ctrl-R : Yes
  265. Enable Web BIOS : Yes
  266. Direct PD Mapping : No
  267. BIOS Enumerate VDs : Yes
  268. Restore Hot Spare on Insertion : No
  269. Expose Enclosure Devices : Yes
  270. Maintain PD Fail History : No
  271. Disable Puncturing : No
  272. Zero Based Enclosure Enumeration : No
  273. PreBoot CLI Enabled : Yes
  274. LED Show Drive Activity : Yes
  275. Cluster Disable : Yes
  276. SAS Disable : No
  277. Auto Detect BackPlane Enable : SGPIO/i2c SEP
  278. Use FDE Only : No
  279. Enable Led Header : No
  280. Delay during POST : 0
  281. EnableCrashDump : No
  282. Disable Online Controller Reset : No
  283. EnableLDBBM : Yes
  284. Un-Certified Hard Disk Drives : Allow
  285. Treat Single span R1E as R10 : No
  286. Max LD per array : 16
  287. Power Saving option : Don't Auto spin down Configured Drives
  288. Max power savings option is not allowed for LDs. Only T10 power conditions are to be used.
  289. Default spin down time in minutes: 30
  290. Enable JBOD : No
  291. TTY Log In Flash : No
  292. Auto Enhanced Import : No
  293. BreakMirror RAID Support : No
  294. Disable Join Mirror : No
  295. Enable Shield State : No
  296. Time taken to detect CME : 60s
  297.  
  298. Exit Code: 0x00
Advertisement
Add Comment
Please, Sign In to add comment
Advertisement
Public Pastes
Advertisement
We use cookies for various purposes including analytics. By continuing to use Pastebin, you agree to our use of cookies as described in the Cookies Policy.  OK, I Understand
Not a member of Pastebin yet?
Sign Up, it unlocks many cool features!