Advertisement
Guest User

iw list output

a guest
Dec 11th, 2019
140
Never
Not a member of Pastebin yet? Sign Up, it unlocks many cool features!
  1. Wiphy phy0
  2. max # scan SSIDs: 20
  3. max scan IEs length: 422 bytes
  4. max # sched scan SSIDs: 20
  5. max # match sets: 11
  6. max # scan plans: 2
  7. max scan plan interval: 65535
  8. max scan plan iterations: 254
  9. Retry short limit: 7
  10. Retry long limit: 4
  11. Coverage class: 0 (up to 0m)
  12. Device supports RSN-IBSS.
  13. Device supports AP-side u-APSD.
  14. Device supports T-DLS.
  15. Supported Ciphers:
  16. * WEP40 (00-0f-ac:1)
  17. * WEP104 (00-0f-ac:5)
  18. * TKIP (00-0f-ac:2)
  19. * CCMP-128 (00-0f-ac:4)
  20. * CMAC (00-0f-ac:6)
  21. Available Antennas: TX 0 RX 0
  22. Supported interface modes:
  23. * IBSS
  24. * managed
  25. * AP
  26. * AP/VLAN
  27. * monitor
  28. * P2P-client
  29. * P2P-GO
  30. * P2P-device
  31. Band 1:
  32. Capabilities: 0x11ef
  33. RX LDPC
  34. HT20/HT40
  35. SM Power Save disabled
  36. RX HT20 SGI
  37. RX HT40 SGI
  38. TX STBC
  39. RX STBC 1-stream
  40. Max AMSDU length: 3839 bytes
  41. DSSS/CCK HT40
  42. Maximum RX AMPDU length 65535 bytes (exponent: 0x003)
  43. Minimum RX AMPDU time spacing: 4 usec (0x05)
  44. HT Max RX data rate: 300 Mbps
  45. HT TX/RX MCS rate indexes supported: 0-15
  46. Bitrates (non-HT):
  47. * 1.0 Mbps
  48. * 2.0 Mbps (short preamble supported)
  49. * 5.5 Mbps (short preamble supported)
  50. * 11.0 Mbps (short preamble supported)
  51. * 6.0 Mbps
  52. * 9.0 Mbps
  53. * 12.0 Mbps
  54. * 18.0 Mbps
  55. * 24.0 Mbps
  56. * 36.0 Mbps
  57. * 48.0 Mbps
  58. * 54.0 Mbps
  59. Frequencies:
  60. * 2412 MHz [1] (22.0 dBm)
  61. * 2417 MHz [2] (22.0 dBm)
  62. * 2422 MHz [3] (22.0 dBm)
  63. * 2427 MHz [4] (22.0 dBm)
  64. * 2432 MHz [5] (22.0 dBm)
  65. * 2437 MHz [6] (22.0 dBm)
  66. * 2442 MHz [7] (22.0 dBm)
  67. * 2447 MHz [8] (22.0 dBm)
  68. * 2452 MHz [9] (22.0 dBm)
  69. * 2457 MHz [10] (22.0 dBm)
  70. * 2462 MHz [11] (22.0 dBm)
  71. * 2467 MHz [12] (22.0 dBm)
  72. * 2472 MHz [13] (22.0 dBm)
  73. * 2484 MHz [14] (disabled)
  74. Band 2:
  75. Capabilities: 0x11ef
  76. RX LDPC
  77. HT20/HT40
  78. SM Power Save disabled
  79. RX HT20 SGI
  80. RX HT40 SGI
  81. TX STBC
  82. RX STBC 1-stream
  83. Max AMSDU length: 3839 bytes
  84. DSSS/CCK HT40
  85. Maximum RX AMPDU length 65535 bytes (exponent: 0x003)
  86. Minimum RX AMPDU time spacing: 4 usec (0x05)
  87. HT Max RX data rate: 300 Mbps
  88. HT TX/RX MCS rate indexes supported: 0-15
  89. VHT Capabilities (0x038071b0):
  90. Max MPDU length: 3895
  91. Supported Channel Width: neither 160 nor 80+80
  92. RX LDPC
  93. short GI (80 MHz)
  94. TX STBC
  95. SU Beamformee
  96. VHT RX MCS set:
  97. 1 streams: MCS 0-9
  98. 2 streams: MCS 0-9
  99. 3 streams: not supported
  100. 4 streams: not supported
  101. 5 streams: not supported
  102. 6 streams: not supported
  103. 7 streams: not supported
  104. 8 streams: not supported
  105. VHT RX highest supported: 0 Mbps
  106. VHT TX MCS set:
  107. 1 streams: MCS 0-9
  108. 2 streams: MCS 0-9
  109. 3 streams: not supported
  110. 4 streams: not supported
  111. 5 streams: not supported
  112. 6 streams: not supported
  113. 7 streams: not supported
  114. 8 streams: not supported
  115. VHT TX highest supported: 0 Mbps
  116. Bitrates (non-HT):
  117. * 6.0 Mbps
  118. * 9.0 Mbps
  119. * 12.0 Mbps
  120. * 18.0 Mbps
  121. * 24.0 Mbps
  122. * 36.0 Mbps
  123. * 48.0 Mbps
  124. * 54.0 Mbps
  125. Frequencies:
  126. * 5180 MHz [36] (22.0 dBm) (no IR)
  127. * 5200 MHz [40] (22.0 dBm) (no IR)
  128. * 5220 MHz [44] (22.0 dBm) (no IR)
  129. * 5240 MHz [48] (22.0 dBm) (no IR)
  130. * 5260 MHz [52] (22.0 dBm) (no IR, radar detection)
  131. * 5280 MHz [56] (22.0 dBm) (no IR, radar detection)
  132. * 5300 MHz [60] (22.0 dBm) (no IR, radar detection)
  133. * 5320 MHz [64] (22.0 dBm) (no IR, radar detection)
  134. * 5340 MHz [68] (disabled)
  135. * 5360 MHz [72] (disabled)
  136. * 5380 MHz [76] (disabled)
  137. * 5400 MHz [80] (disabled)
  138. * 5420 MHz [84] (disabled)
  139. * 5440 MHz [88] (disabled)
  140. * 5460 MHz [92] (disabled)
  141. * 5480 MHz [96] (disabled)
  142. * 5500 MHz [100] (22.0 dBm) (no IR, radar detection)
  143. * 5520 MHz [104] (22.0 dBm) (no IR, radar detection)
  144. * 5540 MHz [108] (22.0 dBm) (no IR, radar detection)
  145. * 5560 MHz [112] (22.0 dBm) (no IR, radar detection)
  146. * 5580 MHz [116] (22.0 dBm) (no IR, radar detection)
  147. * 5600 MHz [120] (22.0 dBm) (no IR, radar detection)
  148. * 5620 MHz [124] (22.0 dBm) (no IR, radar detection)
  149. * 5640 MHz [128] (22.0 dBm) (no IR, radar detection)
  150. * 5660 MHz [132] (22.0 dBm) (no IR, radar detection)
  151. * 5680 MHz [136] (22.0 dBm) (no IR, radar detection)
  152. * 5700 MHz [140] (22.0 dBm) (no IR, radar detection)
  153. * 5720 MHz [144] (22.0 dBm) (no IR, radar detection)
  154. * 5745 MHz [149] (22.0 dBm) (no IR)
  155. * 5765 MHz [153] (22.0 dBm) (no IR)
  156. * 5785 MHz [157] (22.0 dBm) (no IR)
  157. * 5805 MHz [161] (22.0 dBm) (no IR)
  158. * 5825 MHz [165] (22.0 dBm) (no IR)
  159. * 5845 MHz [169] (disabled)
  160. * 5865 MHz [173] (disabled)
  161. * 5885 MHz [177] (disabled)
  162. * 5905 MHz [181] (disabled)
  163. Supported commands:
  164. * new_interface
  165. * set_interface
  166. * new_key
  167. * start_ap
  168. * new_station
  169. * new_mpath
  170. * set_mesh_config
  171. * set_bss
  172. * authenticate
  173. * associate
  174. * deauthenticate
  175. * disassociate
  176. * join_ibss
  177. * join_mesh
  178. * remain_on_channel
  179. * set_tx_bitrate_mask
  180. * frame
  181. * frame_wait_cancel
  182. * set_wiphy_netns
  183. * set_channel
  184. * set_wds_peer
  185. * tdls_mgmt
  186. * tdls_oper
  187. * start_sched_scan
  188. * probe_client
  189. * set_noack_map
  190. * register_beacons
  191. * start_p2p_device
  192. * set_mcast_rate
  193. * connect
  194. * disconnect
  195. * channel_switch
  196. * set_qos_map
  197. * add_tx_ts
  198. * set_multicast_to_unicast
  199. Supported TX frame types:
  200. * IBSS: 0x00 0x10 0x20 0x30 0x40 0x50 0x60 0x70 0x80 0x90 0xa0 0xb0 0xc0 0xd0 0xe0 0xf0
  201. * managed: 0x00 0x10 0x20 0x30 0x40 0x50 0x60 0x70 0x80 0x90 0xa0 0xb0 0xc0 0xd0 0xe0 0xf0
  202. * AP: 0x00 0x10 0x20 0x30 0x40 0x50 0x60 0x70 0x80 0x90 0xa0 0xb0 0xc0 0xd0 0xe0 0xf0
  203. * AP/VLAN: 0x00 0x10 0x20 0x30 0x40 0x50 0x60 0x70 0x80 0x90 0xa0 0xb0 0xc0 0xd0 0xe0 0xf0
  204. * mesh point: 0x00 0x10 0x20 0x30 0x40 0x50 0x60 0x70 0x80 0x90 0xa0 0xb0 0xc0 0xd0 0xe0 0xf0
  205. * P2P-client: 0x00 0x10 0x20 0x30 0x40 0x50 0x60 0x70 0x80 0x90 0xa0 0xb0 0xc0 0xd0 0xe0 0xf0
  206. * P2P-GO: 0x00 0x10 0x20 0x30 0x40 0x50 0x60 0x70 0x80 0x90 0xa0 0xb0 0xc0 0xd0 0xe0 0xf0
  207. * P2P-device: 0x00 0x10 0x20 0x30 0x40 0x50 0x60 0x70 0x80 0x90 0xa0 0xb0 0xc0 0xd0 0xe0 0xf0
  208. Supported RX frame types:
  209. * IBSS: 0x40 0xb0 0xc0 0xd0
  210. * managed: 0x40 0xd0
  211. * AP: 0x00 0x20 0x40 0xa0 0xb0 0xc0 0xd0
  212. * AP/VLAN: 0x00 0x20 0x40 0xa0 0xb0 0xc0 0xd0
  213. * mesh point: 0xb0 0xc0 0xd0
  214. * P2P-client: 0x40 0xd0
  215. * P2P-GO: 0x00 0x20 0x40 0xa0 0xb0 0xc0 0xd0
  216. * P2P-device: 0x40 0xd0
  217. WoWLAN support:
  218. * wake up on disconnect
  219. * wake up on magic packet
  220. * wake up on pattern match, up to 20 patterns of 16-128 bytes,
  221. maximum packet offset 0 bytes
  222. * can do GTK rekeying
  223. * wake up on GTK rekey failure
  224. * wake up on EAP identity request
  225. * wake up on 4-way handshake
  226. * wake up on rfkill release
  227. * wake up on network detection, up to 11 match sets
  228. software interface modes (can always be added):
  229. * AP/VLAN
  230. * monitor
  231. valid interface combinations:
  232. * #{ managed } <= 1, #{ AP, P2P-client, P2P-GO } <= 1, #{ P2P-device } <= 1,
  233. total <= 3, #channels <= 2
  234. HT Capability overrides:
  235. * MCS: ff ff ff ff ff ff ff ff ff ff
  236. * maximum A-MSDU length
  237. * supported channel width
  238. * short GI for 40 MHz
  239. * max A-MPDU length exponent
  240. * min MPDU start spacing
  241. Device supports TX status socket option.
  242. Device supports HT-IBSS.
  243. Device supports SAE with AUTHENTICATE command
  244. Device supports low priority scan.
  245. Device supports scan flush.
  246. Device supports per-vif TX power setting
  247. P2P GO supports CT window setting
  248. P2P GO supports opportunistic powersave setting
  249. Driver supports full state transitions for AP/GO clients
  250. Driver supports a userspace MPM
  251. Driver/device bandwidth changes during BSS lifetime (AP/GO mode)
  252. Device adds DS IE to probe requests
  253. Device can update TPC Report IE
  254. Device supports static SMPS
  255. Device supports dynamic SMPS
  256. Device supports WMM-AC admission (TSPECs)
  257. Device supports configuring vdev MAC-addr on create.
  258. Device supports TDLS channel switching
Advertisement
Advertisement
Advertisement
RAW Paste Data Copied
Advertisement