Guest User

tpfancontrol

a guest
Nov 24th, 2023
164
0
Never
Not a member of Pastebin yet? Sign Up, it unlocks many cool features!
text 13.97 KB | None | 0 0
  1. // new:
  2. //
  3. Hotkeys=1
  4. // HOTKEY Integration:
  5. // Crtl+Shift+B -> BIOS-Mode
  6. // Crtl+Shift+S -> Smart-Mode
  7. // Crtl+Shift+M -> Manual Mode
  8. // Crtl+Shift+1 -> Smart-Mode 1
  9. // Crtl+Shift+2 -> Smart-Mode 2
  10. //
  11. //
  12. //
  13. // >>>> Celsius / Fahrenheit: temperatures in °C (active) / °F <<<<
  14.  
  15. // !!! Temp of lowest Level > 79 -> switch to Fahrenheit !!! see below
  16.  
  17. // ATTENTION: example temp values are for my T61, especially
  18. // BluetoothEDR=1, SensorName5=no5, IgnoreSensors=no5 too
  19. // temp levels 10 degrees centgrade higher than in T4x, R5x,
  20. // change for your purposes.
  21. // Achtung: die eingetragenen Temperaturwerte benutze ich beim T61,
  22. // speziell hier: BluetoothEDR=1, SensorName5=no5, IgnoreSensors=no5
  23. // Für T4x, R5x können die Temps 10 Grad niedriger eingetragen werden.
  24. // Bitte alles für die eigenen Zwecke anpassen.
  25.  
  26. // advice for programmers: TPFanControl must acquire mutex named
  27. // "Access_Thinkpad_EC" to get access to embedded controller
  28. // Hinweis für Programmierer: TPFanControl muss den Mutex
  29. // "Access_Thinkpad_EC" aquirieren können um Zugang zum embbeded
  30. // controller zu bekommen.
  31.  
  32. // with Active=3 & ManFanSpeed=0 & ManModeExit=78 you can have a nice
  33. // quiet time until temps reaches 78 deg. centigrade :-))
  34. // mit Active=3 & ManFanSpeed=0 & ManModeExit=78 kann man nach dem
  35. // "Kaltstart eine schöne ruhige Zeit haben, bis die Temps 78 °C
  36. // erreichen und das Programm auf smart mode schaltet.
  37.  
  38. // -----------------------------------------------------------------
  39. // -----------------------------------------------------------------
  40. // "Active=0" program just reads config.
  41. // "Active=1" allow program to modify fan.
  42. // "Active=2" program will come up in smart mode.
  43. // "Active=3" program will come up in manual mode.
  44. // bei "Active=0" wird nur die Konfiguration ausgelesen.
  45. // bei "Active=1" die Veränderung des Lüfterverhaltens ist aktiviert.
  46. // bei "Active=2" startet das Programm im "Smart"-Modus.
  47. // bei "Active=3" startet das Programm im "Manual"-Modus.
  48.  
  49. Active=2
  50.  
  51. // -----------------------------------------------------------------
  52. // manual fan speed at program start
  53. // Lüfterstufe beim Programmstart
  54.  
  55. ManFanSpeed=7
  56.  
  57. // -----------------------------------------------------------------
  58. // Program exits manual mode and switches to smart mode with last chosen
  59. // profile, if this temp (degrees Centigrade or Fahrenheit) is achieved.
  60. // default= 80 degrees Centigrade / 176 degrees Fahrenheit.
  61. // Das Program verlässt den manual mode und schaltet auf smart mode mit
  62. // letztem gewähltem Profil, wenn diese Temperatur erreicht ist.
  63. // default= 80 Grad Celsius / 176 Grad Fahrenheit.
  64.  
  65. ManModeExit=78 //ManModeExit=172 // with Fahrenheit
  66.  
  67. // -----------------------------------------------------------------
  68. // Window stays on Top if StayOnTop=1, normal behavior =0
  69. // Programmfenster bleibt im Vordergrund bei StayOnTop=1, ansonsten =0
  70.  
  71. StayOnTop=0
  72.  
  73. // -----------------------------------------------------------------
  74. // Set to 1 for slim widget
  75. // Schmales Programmfenster bei SlimDialog=1, ansonsten =0
  76.  
  77. SlimDialog=1
  78.  
  79. // -----------------------------------------------------------------
  80. // set to 1 for bluetooth with enhanced data rate (i.e. T61,
  81. // X61 for T4x, R5x set BluetoothEDR=0 )
  82. // BluetoothEDR=1 für bluetooth mit enhanced data rate (EDR, z.B. T61,
  83. // X61 für T4x, R5x BluetoothEDR=0 setzen)
  84.  
  85. BluetoothEDR=1
  86.  
  87. // -----------------------------------------------------------------
  88. // Windows Priority of Process (0-5, normal=2), increase if fancontrol has
  89. // big delays in response while other processes consume performance.
  90. // Windows-Priorität des Processes (0-5, normal=2), ggf. erhöhen, falls
  91. // Reaktion des Programms zu träge wegen Resourcenverbrauch durch andere
  92. // Anwendungen
  93.  
  94. ProcessPriority=2
  95.  
  96. // -----------------------------------------------------------------
  97. // Show no icon ballons: NoBallons=1, show icon ballons: NoBallons=0
  98. // Icon Sprechblasen anzeigen mit NoBallons=0, keine bei NoBallons=1
  99.  
  100. NoBallons=1
  101.  
  102. // -----------------------------------------------------------------
  103. // check temperatures every x seconds (default 5)
  104. // Überprüft die Temperaturen alle x Sekunden (Standard ist 5).
  105.  
  106. Cycle=5
  107.  
  108. // -----------------------------------------------------------------
  109. // For Thinkpads A2x,T2x,X2x set NoExtSensor=1 to exclude reading
  110. // of extended sensors to prevent program errors. Attention 570(E)
  111. // is NOT compatible. Fan speed is not available on all models.
  112. // Bei Thinkpads A2x,T2x,X2x NoExtSensor=1 setzen: die Sensoren 9-12
  113. // werden nicht ausgelesen und dadurch Fehlermeldungen vermieden.
  114. // Funktioniert NICHT bei 570(E), Fanspeed nicht immer verfügbar.
  115.  
  116. NoExtSensor=0
  117.  
  118. // -----------------------------------------------------------------
  119. // Minimize to systray immediately when starting
  120. // Minimiert das Programm schon beim Start in die Taskleiste.
  121.  
  122. StartMinimized=0
  123.  
  124. // -----------------------------------------------------------------
  125. // check icon of tpfcicon.exe (optional) every x seconds (default 1)
  126. // Überprüft das Icon von tpfcicon.exe alle x Sekunden (Standard =1).
  127.  
  128. IconCycle=1
  129.  
  130. // -----------------------------------------------------------------
  131. // Show new icon with max. temperature / sensor name
  132. // Zeige neues Icon mit Max. Temperatur / Sensorbezeichnung
  133.  
  134. ShowTempIcon=1
  135.  
  136. // -----------------------------------------------------------------
  137. // Save the icon by a start delay of the program/service of
  138. // "SecStartDelay" (sec.) within "SecWinUptime" (sec.) after (re)boot
  139. // Delete slashes '//' at next 3 parameters.
  140. // Das Problem der nicht erscheinenden Icons wird durch eine
  141. // Startverzögerung um SecStartDelay (Sekunden) innerhalb einer Zeit von
  142. // SecWinUptime (Sekunden) verhindert. Kommentarstriche "//" entfernen.
  143. //
  144. //SecWinUptime=120 //"SecWinUptime" (sec.) after (re)boot
  145. //SecStartDelay=60 //start delay of the program (sec.)
  146. //NoWaitMessage=0 //set to 1 to avoid sleep message
  147. //ReIcCycle=600 //rebuild TempIcon every xxx secs.
  148.  
  149. // -----------------------------------------------------------------
  150. // Temperature thresholds for turning the taskbar icon
  151. // yellow orange red (Smart and Manual mode only and
  152. // only together with MinimizeToTray=1)
  153. // Temperaturgrenzwerte, die das Symbol in der Taskbar gelb,
  154. // orange bzw. rot färben. (Nur im "Smart"- und "Manual"-Modus
  155. // in Kombination mit "MinimizeToTray=1" verfügbar.)
  156.  
  157. IconLevels=65 75 80 // Fahrenheit: IconLevels=122 140 158
  158.  
  159. // -----------------------------------------------------------------
  160. // Beep frequency and duration (in ms) for successful
  161. // fan state changes. (Set either or both to zero to
  162. // disable)
  163. // Frequenz und Dauer des Piep-Signals (in ms), das eine erfolgreiche
  164. // Änderung des Lüfterzustands ankündigt. (Um den Piepton abzuschalten,
  165. // setzen Sie entweder einen oder beide Werte auf 0.)
  166.  
  167. FanBeep=0 0
  168.  
  169. // --------------------------------------------------------
  170. // If this max number of consecutive EC read errors occur
  171. // program will switch fan back to bios mode and exit
  172. // Sobald die maximale Anzahl aufeinanderfolgender EC-Lesefehler
  173. // erreicht ist, schaltet das Programm auf den BIOS-Modus um
  174. // und wird beendet.
  175.  
  176. MaxReadErrors= 10
  177.  
  178. // --------------------------------------------------------
  179. // Log2File=1 enables, Log2File=0 disables writing to TPFanControl.log
  180. // Start program with admin rights.
  181. // Log2File=1 aktiviert, Log2File=0 deaktiviert
  182. // Schreiben nach TPFanControl.log, Programm benötigt Admin-Rechte.
  183.  
  184. Log2File=0
  185.  
  186. // --------------------------------------------------------
  187. // Log2csv=1 enables, Log2csv=0 disables
  188. // writing to TPFanControl_csv.txt renamed to
  189. // TPFanControl_last_csv.txt after restart of TPFanControl
  190. // rename to *.csv for use with excel
  191. // Start program with admin rights.
  192. // Log2csv=1 aktiviert Schreiben nach TPFanControl_csv.txt
  193. // Programm benötigt Admin-Rechte. Datei wird umbenannt in
  194. // TPFanControl_last_csv.txt nach erneutem Start von TPFanControl
  195. // In *.csv umbenennen für anschliessende Bearbeitung mit excel
  196.  
  197. Log2csv=0
  198.  
  199. // --------------------------------------------------------
  200. // List (separated by comma) of sensors to ignore when
  201. // determining the max. temperature. (Use lower case,
  202. // e.g "IgnoreSensors=pci,aps")
  203. // Liste der Sensoren, getrennt durch Kommata, die bei der
  204. // Ermittlung der Maximaltemperatur ignoriert werden. (Verwenden
  205. // Sie kleine Buchstaben, z.B. "IgnoreSensors=pci,aps".)
  206.  
  207. IgnoreSensors=no5
  208.  
  209. // ---------------------------------------------------------
  210. // List of new 3 letter sensor names, delete leading
  211. // slashes to aktivat. Don't use capital letters for readability
  212. // of temp icon.
  213. // Liste von neuen Sensorname (jeweils 3 Buchstaben), zum
  214. // Aktivieren die Schrägstriche löschen. Kleine Buschstaben
  215. // wg. der Lesbarkeit im TempIcon gebrauchen.
  216.  
  217. //SensorName1=cpu
  218. //SensorName2=aps
  219. //SensorName3=pcm
  220. //SensorName4=gpu
  221. SensorName5=no5
  222. //SensorName6=x7d
  223. //SensorName7=bat
  224. //SensorName8=x7f
  225. //SensorName9=bus
  226. //SensorName10=pci
  227. //SensorName11=pwr
  228. //SensorName12=xc3
  229.  
  230. // ---------------------------------------------------------
  231. // calculating Highest Temp with:
  232. // temperature of sensor no. = real temp minus SensorOffsetno.
  233. // Default SensorOffset1-12=0 , Capital O in SensorOffset,
  234. // to activate delete slashes '//',
  235. // Negative SensorOffsetno. values increase temperature values.
  236. // Berechnung von Highest Temp mit:
  237. // Temperatur des Sensor Nr. = reale Temp minus SensorOffsetnr.
  238. // Default: SensorOffset1-12=0 , Grosses O in SensorOffsetnr.
  239. // zum Aktivieren Schrägstriche '//' löschen,
  240. // Negative SensorOffsetnr-Werte erhöhen den Temperaturwert.
  241.  
  242. //SensorOffset1=20
  243. //SensorOffset2=20
  244. //SensorOffset3=0
  245. //SensorOffset4=2
  246. //SensorOffset5=1
  247. //SensorOffset6=5
  248. //SensorOffset7=5
  249. //SensorOffset8=4
  250. //SensorOffset9=3
  251. //SensorOffset10=2
  252. //SensorOffset11=1
  253. //SensorOffset12=5
  254.  
  255. // -----------------------------------------------------------------
  256. // set to 1 to show calculated temps for sensors
  257. // =1 gesetzt zeigt die Temperaturen mit Offsetkorrektur an
  258.  
  259. ShowBiasedTemps=1
  260.  
  261. // -----------------------------------------------------------------
  262. // Show all/active sensors at start up. all=1 only active=0
  263. // Zeige alle/aktive Sensoren an: alle=1, nur aktive =0
  264.  
  265. ShowAll=0
  266.  
  267. // --------------------------------------------------------
  268. // temperature levels 'Level=' with associated fan levels
  269. // (for the fan to come back, temperature must fall
  270. // down to previous level). There may be more or
  271. // less levels in this list. The first one should
  272. // have a fan speed of zero and is the "turn off"
  273. // temperature.
  274. // Fan speed of 64 is extreme and may be an *unsupported*
  275. // and *damaging* mode. A fan speed of 128 setting is
  276. // not really a fan speed in itself but will instead switch
  277. // fan control to BIOS mode (0x80). The idea of this
  278. // is to let the program get out of the way and let the
  279. // BIOS handle extremes.(and then switch back to smart if
  280. // the temperature is okay again)
  281. //
  282. // Im Folgenden sind die Temperaturpegel samt den jeweils
  283. // zugeordeten Lüfterstufen aufgelistet. (Sobald die Temperatur in
  284. // den Bereich eines niedrigeren bzw. höheren Pegels wechselt, wird
  285. // die Lüfterstufe automatisch angepasst und folglich verringert bzw.
  286. // erhöht sich die Geschwindigkeit des Lüfters.) Diese Liste kann
  287. // weniger oder auch mehr Stufen beinhalten. Sinngemäß sollte die
  288. // erste Stufe die gewünschte Temperatur definieren, bei der sich
  289. // der Lüfter ausschaltet (Lüftergeschwindigkeit 0)
  290. // Die Lüftergeschwindigkeit 64 ist ein Extremwert und könnte somit
  291. // eine von IBM nicht unterstützte und sogar schädigende Betriebsart
  292. // darstellen. Die Lüftergeschwindigkeit 128 ist an sich keine eigene
  293. // Geschwindigkeitsstufe, sondern gibt stattdessen die Kontrolle
  294. // des Lüfters an das BIOS (BIOS mode, 0x80) zurück. Der Hintergrund
  295. // dieser Einstellung ist die Möglichkeit, das Programm auszuschließen,
  296. // um Extemfälle wieder vom BIOS steuern zu lassen. (Sobald sich die
  297. // Temperatur wieder im Normbereich befindet, wird erneut der Smart
  298. // Modus aktiviert.)
  299. //
  300. // Temp of lowest Level (commonly set to fan speed zero) of profile
  301. // "Smart Mode 1" will switch from Celsius to Fahrenheit if set higher
  302. // than 79 degrees. Temps of higher levels have no influence on F/C.
  303. //
  304. // profile "Smart Mode 1"
  305. // change values and number of items for your needs
  306. // Celsius: // Fahrenheit:
  307.  
  308. MenuLabelSM1=Smart Mode 1/ Label for Icon Menu, must be terminated by '/'
  309.  
  310. Level=60 0 // Level=140 0
  311. Level=65 1 // Level=150 1
  312. Level=75 3 // Level=165 3
  313. Level=80 7 // Level=175 7
  314. Level=90 64 // Level=195 64
  315.  
  316. // optional 2nd profile "Smart Mode 2", switched by icon menue
  317. // change values and number of items for your needs
  318. // to deactivate, insert leading '//' into following lines
  319.  
  320. MenuLabelSM2=Smart Mode 2/ Label for Icon Menu, must be terminated by '/'
  321.  
  322. Level2=22 0 // Level2=70 0
  323. Level2=33 1 // Level2=90 1
  324. Level2=38 2 // Level2=100 2
  325. Level2=44 3 // Level2=110 3
  326. Level2=55 7 // Level2=130 7
  327. Level2=66 64 // Level2=150 64
  328. Level2=77 128 // Level2=170 128
  329.  
  330. // -----------------------------------------------------------------
  331. // IconColorFan=1 digital Icon will turn green while fan is running.
  332. // IconColorFan=1 Digitales Icon wird grün während der Lüfter läuft.
  333.  
  334. IconColorFan=1
  335.  
  336. // -----------------------------------------------------------------
  337. // Lev64Norm=1 : Fan level 64 acts as normal level with hysteresis,
  338. // fan will run till next lower temp step is reached (no pulsing fan).
  339. // If set to zero fan level 64 acts as emergency level without hysteresis,
  340. // fan will run till level64 temp is reached again (pulsing fan can happen).
  341. // Lev64Norm=1 : Fan level 64 arbeitet mit Hysterese, Lüfter läuft,
  342. // bis nächst tieferer level erreicht wird. Lüfter pulsiert nicht.
  343. // Falls Lev64Norm=0 gesetzt, arbeitet level 64 als Notfallkühlung oberhalb
  344. // der Temperatur von level 64. Ein Pulsieren des Lüfters ist möglich.
  345.  
  346. Lev64Norm=1
Advertisement
Add Comment
Please, Sign In to add comment