+ cat /lib/dracut/dracut-056
dracut-056
+ echo /proc/cmdline
/proc/cmdline
+ sed -e 's/\(ftp:\/\/.*\):.*@/\1:*******@/g;s/\(cifs:\/\/.*\):.*@/\1:*******@/g;s/cifspass=[^ ]*/cifspass=*******/g;s/iscsi:.*@/iscsi:******@/g;s/rd.iscsi.password=[^ ]*/rd.iscsi.password=******/g;s/rd.iscsi.in.password=[^ ]*/rd.iscsi.in.password=******/g' /proc/cmdline
BOOT_IMAGE=/boot/vmlinuz-x86_64 lang=en_US keytable=us tz=UTC misobasedir=garuda root=miso:LABEL=GARUDA_HYPRLAND_RAPTOR quiet systemd.show_status=1 ibt=off rd.debug driver=nonfree nouveau.modeset=0 i915.modeset=1 radeon.modeset=1 rdinit=/vtoy/vtoy
+ '[' -f /etc/cmdline ']'
+ for _i in /etc/cmdline.d/*.conf
+ '[' -f /etc/cmdline.d/00-btrfs.conf ']'
+ echo /etc/cmdline.d/00-btrfs.conf
/etc/cmdline.d/00-btrfs.conf
+ sed -e 's/\(ftp:\/\/.*\):.*@/\1:*******@/g;s/\(cifs:\/\/.*\):.*@/\1:*******@/g;s/cifspass=[^ ]*/cifspass=*******/g;s/iscsi:.*@/iscsi:******@/g;s/rd.iscsi.password=[^ ]*/rd.iscsi.password=******/g;s/rd.iscsi.in.password=[^ ]*/rd.iscsi.in.password=******/g' /etc/cmdline.d/00-btrfs.conf
rd.driver.pre=btrfs
+ cat /proc/self/mountinfo
1 1 0:2 / / rw - rootfs rootfs rw
20 1 0:19 / /proc rw,nosuid,nodev,noexec,relatime - proc proc rw
21 1 0:20 / /sys rw,nosuid,nodev,noexec,relatime - sysfs sysfs rw
22 1 0:5 / /dev rw,nosuid,noexec - devtmpfs devtmpfs rw,size=16038260k,nr_inodes=4009565,mode=755,inode64
23 22 0:21 / /dev/pts rw,nosuid,noexec,relatime - devpts devpts rw,gid=5,mode=620,ptmxmode=000
24 22 0:22 / /dev/shm rw,nosuid,nodev,noexec - tmpfs tmpfs rw,inode64
25 1 0:23 / /run rw,nosuid,nodev,noexec - tmpfs tmpfs rw,mode=755,inode64
27 25 254:0 / /run/miso/bootmnt ro,relatime - iso9660 /dev/mapper/ventoy ro,nojoliet,check=s,map=n,blocksize=2048,iocharset=utf8
28 25 0:25 / /run/miso/overlay_root rw,relatime - tmpfs overlay_root rw,size=24147080k,mode=755,inode64
+ cat /proc/mounts
rootfs / rootfs rw 0 0
proc /proc proc rw,nosuid,nodev,noexec,relatime 0 0
sysfs /sys sysfs rw,nosuid,nodev,noexec,relatime 0 0
devtmpfs /dev devtmpfs rw,nosuid,noexec,size=16038260k,nr_inodes=4009565,mode=755,inode64 0 0
devpts /dev/pts devpts rw,nosuid,noexec,relatime,gid=5,mode=620,ptmxmode=000 0 0
tmpfs /dev/shm tmpfs rw,nosuid,nodev,noexec,inode64 0 0
tmpfs /run tmpfs rw,nosuid,nodev,noexec,mode=755,inode64 0 0
/dev/mapper/ventoy /run/miso/bootmnt iso9660 ro,relatime,nojoliet,check=s,map=n,blocksize=2048,iocharset=utf8 0 0
overlay_root /run/miso/overlay_root tmpfs rw,relatime,size=24147080k,mode=755,inode64 0 0
+ blkid
/dev/nvme0n1p5: UUID="4d96cc0e-f0e6-47c5-8bd4-9408581b237e" BLOCK_SIZE="4096" TYPE="ext4" PARTUUID="a7f40551-200d-074a-aac6-3443dc29ce71"
/dev/nvme0n1p3: BLOCK_SIZE="512" UUID="58308FD2308FB612" TYPE="ntfs" PARTLABEL="Basic data partition" PARTUUID="7d81cf68-30eb-48f6-ab39-6504d1de780e"
/dev/nvme0n1p1: LABEL_FATBOOT="ESP" LABEL="ESP" UUID="2C08-5D31" BLOCK_SIZE="512" TYPE="vfat" PARTLABEL="EFI system partition" PARTUUID="e9e0017c-0080-4ce8-996d-ad8cc6eb4709"
/dev/nvme0n1p4: BLOCK_SIZE="512" UUID="D43CE9FB3CE9D88E" TYPE="ntfs" PARTUUID="5a9034c4-ca71-4ced-bc3f-26022521dad4"
/dev/nvme0n1p2: PARTLABEL="Microsoft reserved partition" PARTUUID="83b99a00-9095-4f73-b799-849c66ff1bbf"
/dev/sdb1: LABEL="Ventoy" UUID="4E21-0000" BLOCK_SIZE="512" TYPE="exfat" PARTLABEL="Ventoy" PARTUUID="4fdb0da8-0c1f-4c9c-a39e-c871f8cc5d8c"
/dev/mapper/ventoy: BLOCK_SIZE="2048" UUID="2023-06-22-05-56-58-00" LABEL="GARUDA_HYPRLAND_RAPTOR" TYPE="iso9660" PTTYPE="dos"
/dev/sde1: LABEL="Gaming" BLOCK_SIZE="512" UUID="30F0EAEFF0EABA6C" TYPE="ntfs" PARTLABEL="Gaming Drv" PARTUUID="b70d89cf-e86b-42ef-b255-47772207c883"
/dev/nvme1n1p2: LABEL="Garuda-Root" UUID="31a11fe8-f0db-4d45-acc1-15f30a437988" UUID_SUB="eff4bd1e-9be0-4c14-b8fb-12e443d773d7" BLOCK_SIZE="4096" TYPE="btrfs" PARTUUID="371d730b-6888-9841-935b-47accd75f836"
/dev/nvme1n1p3: UUID="95624fcd-2340-4da1-9b87-9314df6f1f46" TYPE="swap" PARTUUID="a6e5ceb1-235b-4849-a10f-8db3b40e1e31"
/dev/nvme1n1p1: UUID="33e46d04-5d0a-4744-a50f-54adba815811" UUID_SUB="7a5226e7-8d6d-4d01-a55d-1912523a6884" BLOCK_SIZE="4096" TYPE="btrfs" PARTUUID="db235354-2f4a-2c4f-8362-ad69ae9a81d6"'[' -f /etc/conf.d/systemd.conf ']'
+ echo /etc/conf.d/systemd.conf
/etc/conf.d/systemd.conf
+ sed -e 's/\(ftp:\/\/.*\):.*@/\1:*******@/g;s/\(cifs:\/\/.*\):.*@/\1:*******@/g;s/cifspass=[^ ]*/cifspass=*******/g;s/iscsi:.*@/iscsi:******@/g;s/rd.iscsi.password=[^ ]*/rd.iscsi.password=******/g;s/rd.iscsi.in.password=[^ ]*/rd.iscsi.in.password=******/g' /etc/conf.d/systemd.conf
systemdutildir="/usr/lib/systemd"
systemdsystemunitdir="/usr/lib/systemd/system"
systemdsystemconfdir="/etc/systemd/system"
+ command -v lvm
+ command -v dmsetup
+ dmsetup ls --tree
ventoy (254:0)
 `- (8:17)
+ cat /proc/mdstat
cat: /proc/mdstat: No such file or directory
+ command -v ip
+ command -v journalctl
+ dmesg
+ sed -e 's/\(ftp:\/\/.*\):.*@/\1:*******@/g;s/\(cifs:\/\/.*\):.*@/\1:*******@/g;s/cifspass=[^ ]*/cifspass=*******/g;s/iscsi:.*@/iscsi:******@/g;s/rd.iscsi.password=[^ ]*/rd.iscsi.password=******/g;s/rd.iscsi.in.password=[^ ]*/rd.iscsi.in.password=******/g'
[    0.000000] Linux version 6.3.8-zen1-1-zen (linux-zen@archlinux) (gcc (GCC) 13.1.1 20230429, GNU ld (GNU Binutils) 2.40.0) #1 ZEN SMP PREEMPT_DYNAMIC Wed, 14 Jun 2023 20:10:15 +0000
[    0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-x86_64 lang=en_US keytable=us tz=UTC misobasedir=garuda root=miso:LABEL=GARUDA_HYPRLAND_RAPTOR quiet systemd.show_status=1 ibt=off rd.debug driver=nonfree nouveau.modeset=0 i915.modeset=1 radeon.modeset=1 rdinit=/vtoy/vtoy
[    0.000000] x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers'
[    0.000000] x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers'
[    0.000000] x86/fpu: Supporting XSAVE feature 0x004: 'AVX registers'
[    0.000000] x86/fpu: Supporting XSAVE feature 0x200: 'Protection Keys User registers'
[    0.000000] x86/fpu: xstate_offset[2]:  576, xstate_sizes[2]:  256
[    0.000000] x86/fpu: xstate_offset[9]:  832, xstate_sizes[9]:    8
[    0.000000] x86/fpu: Enabled xstate features 0x207, context size is 840 bytes, using 'compacted' format.
[    0.000000] signal: max sigframe size: 3376
[    0.000000] BIOS-provided physical RAM map:
[    0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009efff] usable
[    0.000000] BIOS-e820: [mem 0x000000000009f000-0x00000000000bffff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000000100000-0x00000000099fffff] usable
[    0.000000] BIOS-e820: [mem 0x0000000009a00000-0x0000000009dfffff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000009e00000-0x0000000009efffff] usable
[    0.000000] BIOS-e820: [mem 0x0000000009f00000-0x0000000009f0efff] ACPI NVS
[    0.000000] BIOS-e820: [mem 0x0000000009f0f000-0x00000000ab798fff] usable
[    0.000000] BIOS-e820: [mem 0x00000000ab799000-0x00000000ac998fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000ac999000-0x00000000c9baefff] usable
[    0.000000] BIOS-e820: [mem 0x00000000c9baf000-0x00000000c9f7efff] type 20
[    0.000000] BIOS-e820: [mem 0x00000000c9f7f000-0x00000000cbf7efff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000cbf7f000-0x00000000cdf7efff] ACPI NVS
[    0.000000] BIOS-e820: [mem 0x00000000cdf7f000-0x00000000cdffefff] ACPI data
[    0.000000] BIOS-e820: [mem 0x00000000cdfff000-0x00000000cdffffff] usable
[    0.000000] BIOS-e820: [mem 0x00000000ce000000-0x00000000cfffffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000f8000000-0x00000000fbffffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fde00000-0x00000000fdefffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fe000000-0x00000000fe0fffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000fec01fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fec10000-0x00000000fec10fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fec20000-0x00000000fec20fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fed80000-0x00000000fed81fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000ff000000-0x00000000fff1ffff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000080e2fffff] usable
[    0.000000] BIOS-e820: [mem 0x000000080e300000-0x000000082fffffff] reserved
[    0.000000] NX (Execute Disable) protection: active
[    0.000000] efi: EFI v2.7 by Dell Inc.
[    0.000000] efi: ACPI=0xcdffe000 ACPI 2.0=0xcdffe014 TPMFinalLog=0xcdf36000 SMBIOS=0xca709000 SMBIOS 3.0=0xca707000 MEMATTR=0xb69da018 ESRT=0xb69e0a98
[    0.000000] efi: Remove mem57: MMIO range=[0xf8000000-0xfbffffff] (64MB) from e820 map
[    0.000000] e820: remove [mem 0xf8000000-0xfbffffff] reserved
[    0.000000] efi: Remove mem58: MMIO range=[0xfde00000-0xfdefffff] (1MB) from e820 map
[    0.000000] e820: remove [mem 0xfde00000-0xfdefffff] reserved
[    0.000000] efi: Remove mem59: MMIO range=[0xfe000000-0xfe0fffff] (1MB) from e820 map
[    0.000000] e820: remove [mem 0xfe000000-0xfe0fffff] reserved
[    0.000000] efi: Not removing mem60: MMIO range=[0xfec00000-0xfec01fff] (8KB) from e820 map
[    0.000000] efi: Not removing mem61: MMIO range=[0xfec10000-0xfec10fff] (4KB) from e820 map
[    0.000000] efi: Not removing mem62: MMIO range=[0xfec20000-0xfec20fff] (4KB) from e820 map
[    0.000000] efi: Not removing mem63: MMIO range=[0xfed80000-0xfed81fff] (8KB) from e820 map
[    0.000000] efi: Not removing mem64: MMIO range=[0xfee00000-0xfee00fff] (4KB) from e820 map
[    0.000000] efi: Remove mem65: MMIO range=[0xff000000-0xfff1ffff] (15MB) from e820 map
[    0.000000] e820: remove [mem 0xff000000-0xfff1ffff] reserved
[    0.000000] SMBIOS 3.3.0 present.
[    0.000000] DMI: Dell Inc. Dell G15 5515/00VT1V, BIOS 1.11.1 04/18/2023
[    0.000000] tsc: Fast TSC calibration using PIT
[    0.000000] tsc: Detected 3193.969 MHz processor
[    0.000351] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[    0.000353] e820: remove [mem 0x000a0000-0x000fffff] usable
[    0.000360] last_pfn = 0x80e300 max_arch_pfn = 0x400000000
[    0.000366] x86/PAT: Configuration [0-7]: WB  WC  UC- UC  WB  WP  UC- WT
[    0.000947] last_pfn = 0xce000 max_arch_pfn = 0x400000000
[    0.004940] esrt: Reserving ESRT space from 0x00000000b69e0a98 to 0x00000000b69e0ad0.
[    0.004945] e820: update [mem 0xb69e0000-0xb69e0fff] usable ==> reserved
[    0.004961] Using GB pages for direct mapping
[    0.005253] Secure boot could not be determined
[    0.005254] RAMDISK: [mem 0x2a4c7000-0x3125afff]
[    0.005266] ACPI: Early table checksum verification disabled
[    0.005268] ACPI: RSDP 0x00000000CDFFE014 000024 (v02 DELL  )
[    0.005271] ACPI: XSDT 0x00000000CDFD3188 00015C (v01 DELL   CL09     00000002      01000013)
[    0.005276] ACPI: FACP 0x00000000CDFE6000 00010C (v05 DELL   CL09     00000002 ASL  01000013)
[    0.005280] ACPI: DSDT 0x00000000CDFD6000 00BB29 (v01 DELL   CL09     00000002 ASL  01000013)
[    0.005282] ACPI: FACS 0x00000000CDEAB000 000040
[    0.005284] ACPI: UEFI 0x00000000CDF7E000 000236 (v01 INSYDE H2O BIOS 00000001 ACPI 00040000)
[    0.005286] ACPI: SSDT 0x00000000CDFFC000 000106 (v02 Compal CompTabl 00003000 INTL 20130117)
[    0.005288] ACPI: SSDT 0x00000000CDFFB000 00076F (v02 Compal CompCMFC 00003000 INTL 20130117)
[    0.005290] ACPI: SSDT 0x00000000CDFFA000 000033 (v02 Compal CompTabl 00003000 INTL 20130117)
[    0.005292] ACPI: SSDT 0x00000000CDFF9000 000B2B (v02 INSYDE UsbCTabl 00001000 INTL 20130117)
[    0.005294] ACPI: SSDT 0x00000000CDFF1000 0072B0 (v02 AMD    AmdTable 00000002 MSFT 04000000)
[    0.005296] ACPI: IVRS 0x00000000CDFF0000 0001A4 (v02 DELL   CL09     00000001 ASL  00000000)
[    0.005298] ACPI: SSDT 0x00000000CDFEC000 003A21 (v01 AMD    AMD AOD  00000001 INTL 20130117)
[    0.005300] ACPI: SSDT 0x00000000CDFEB000 000472 (v02 INSYDE TPMACPI  00001000 INTL 20130117)
[    0.005301] ACPI: TPM2 0x00000000CDFEA000 00004C (v04 DELL   CL09     00000002 ASL  01000013)
[    0.005303] ACPI: MSDM 0x00000000CDFE9000 000055 (v03 DELL   CL09     00000001 ASL  00040000)
[    0.005305] ACPI: ASF! 0x00000000CDFE8000 0000A5 (v32 DELL   CL09     00000002 ASL  01000013)
[    0.005307] ACPI: BOOT 0x00000000CDFE7000 000028 (v01 DELL   CL09     00000002 ASL  01000013)
[    0.005309] ACPI: HPET 0x00000000CDFE5000 000038 (v01 DELL   CL09     00000002 ASL  01000013)
[    0.005311] ACPI: APIC 0x00000000CDFE4000 000138 (v03 DELL   CL09     00000002 ASL  01000013)
[    0.005313] ACPI: MCFG 0x00000000CDFE3000 00003C (v01 DELL   CL09     00000002 ASL  01000013)
[    0.005315] ACPI: SLIC 0x00000000CDFE2000 000176 (v01 DELL   CL09     00000002 ASL  01000013)
[    0.005317] ACPI: SSDT 0x00000000CDFD5000 000080 (v01 INSYDE EDK2     00000002      01000013)
[    0.005319] ACPI: WSMT 0x00000000CDFD4000 000028 (v01 DELL   CL09     00000001 ASL  00040000)
[    0.005320] ACPI: SSDT 0x00000000CDFD0000 002FA9 (v01 Insyde NvdTable 00001000 INTL 20130117)
[    0.005322] ACPI: VFCT 0x00000000CDFC2000 00D884 (v01 DELL   CL09     00000001 ASL  31504F47)
[    0.005324] ACPI: SSDT 0x00000000CDFFD000 0000F8 (v01 INSYDE PcdTabl  00001000 INTL 20130117)
[    0.005326] ACPI: SSDT 0x00000000CDFBC000 005354 (v02 AMD    AmdTable 00000001 AMD  00000001)
[    0.005328] ACPI: CRAT 0x00000000CDFBB000 000EE8 (v01 DELL   CL09     00000001 ASL  00000001)
[    0.005330] ACPI: CDIT 0x00000000CDFBA000 000029 (v01 DELL   CL09     00000001 ASL  00000001)
[    0.005332] ACPI: SSDT 0x00000000CDFB8000 000139 (v01 AMD    AmdTable 00000001 INTL 20130117)
[    0.005334] ACPI: SSDT 0x00000000CDFB7000 000D53 (v01 AMD    AmdTable 00000001 INTL 20130117)
[    0.005336] ACPI: SSDT 0x00000000CDFB5000 0010C5 (v01 AMD    AmdTable 00000001 INTL 20130117)
[    0.005337] ACPI: SSDT 0x00000000CDFB4000 000216 (v01 AMD    AmdTable 00000001 INTL 20130117)
[    0.005339] ACPI: SSDT 0x00000000CDFB3000 00028D (v01 AMD    AmdTable 00000001 INTL 20130117)
[    0.005341] ACPI: SSDT 0x00000000CDFAF000 00362F (v01 AMD    AmdTable 00000001 INTL 20130117)
[    0.005343] ACPI: FPDT 0x00000000CDFAE000 000044 (v01 DELL   CL09     00000002 ASL  01000013)
[    0.005345] ACPI: SSDT 0x00000000CDFAD000 00020A (v01 AMD    AmdTable 00000001 INTL 20130117)
[    0.005347] ACPI: SSDT 0x00000000CDFAC000 0006DA (v01 AMD    AmdTable 00000001 INTL 20130117)
[    0.005349] ACPI: SSDT 0x00000000CDFAB000 00036E (v01 AMD    AmdTable 00000001 INTL 20130117)
[    0.005351] ACPI: SSDT 0x00000000CDFAA000 00007D (v01 AMD    AmdTable 00000001 INTL 20130117)
[    0.005352] ACPI: SSDT 0x00000000CDFA9000 0004DB (v01 AMD    AmdTable 00000001 INTL 20130117)
[    0.005354] ACPI: BGRT 0x00000000CDFB9000 000038 (v01 DELL   CL09     00000001 ASL  00040000)
[    0.005356] ACPI: Reserving FACP table memory at [mem 0xcdfe6000-0xcdfe610b]
[    0.005357] ACPI: Reserving DSDT table memory at [mem 0xcdfd6000-0xcdfe1b28]
[    0.005358] ACPI: Reserving FACS table memory at [mem 0xcdeab000-0xcdeab03f]
[    0.005358] ACPI: Reserving UEFI table memory at [mem 0xcdf7e000-0xcdf7e235]
[    0.005359] ACPI: Reserving SSDT table memory at [mem 0xcdffc000-0xcdffc105]
[    0.005359] ACPI: Reserving SSDT table memory at [mem 0xcdffb000-0xcdffb76e]
[    0.005360] ACPI: Reserving SSDT table memory at [mem 0xcdffa000-0xcdffa032]
[    0.005360] ACPI: Reserving SSDT table memory at [mem 0xcdff9000-0xcdff9b2a]
[    0.005361] ACPI: Reserving SSDT table memory at [mem 0xcdff1000-0xcdff82af]
[    0.005362] ACPI: Reserving IVRS table memory at [mem 0xcdff0000-0xcdff01a3]
[    0.005362] ACPI: Reserving SSDT table memory at [mem 0xcdfec000-0xcdfefa20]
[    0.005363] ACPI: Reserving SSDT table memory at [mem 0xcdfeb000-0xcdfeb471]
[    0.005363] ACPI: Reserving TPM2 table memory at [mem 0xcdfea000-0xcdfea04b]
[    0.005364] ACPI: Reserving MSDM table memory at [mem 0xcdfe9000-0xcdfe9054]
[    0.005364] ACPI: Reserving ASF! table memory at [mem 0xcdfe8000-0xcdfe80a4]
[    0.005365] ACPI: Reserving BOOT table memory at [mem 0xcdfe7000-0xcdfe7027]
[    0.005365] ACPI: Reserving HPET table memory at [mem 0xcdfe5000-0xcdfe5037]
[    0.005366] ACPI: Reserving APIC table memory at [mem 0xcdfe4000-0xcdfe4137]
[    0.005366] ACPI: Reserving MCFG table memory at [mem 0xcdfe3000-0xcdfe303b]
[    0.005367] ACPI: Reserving SLIC table memory at [mem 0xcdfe2000-0xcdfe2175]
[    0.005368] ACPI: Reserving SSDT table memory at [mem 0xcdfd5000-0xcdfd507f]
[    0.005368] ACPI: Reserving WSMT table memory at [mem 0xcdfd4000-0xcdfd4027]
[    0.005369] ACPI: Reserving SSDT table memory at [mem 0xcdfd0000-0xcdfd2fa8]
[    0.005369] ACPI: Reserving VFCT table memory at [mem 0xcdfc2000-0xcdfcf883]
[    0.005370] ACPI: Reserving SSDT table memory at [mem 0xcdffd000-0xcdffd0f7]
[    0.005370] ACPI: Reserving SSDT table memory at [mem 0xcdfbc000-0xcdfc1353]
[    0.005371] ACPI: Reserving CRAT table memory at [mem 0xcdfbb000-0xcdfbbee7]
[    0.005371] ACPI: Reserving CDIT table memory at [mem 0xcdfba000-0xcdfba028]
[    0.005372] ACPI: Reserving SSDT table memory at [mem 0xcdfb8000-0xcdfb8138]
[    0.005373] ACPI: Reserving SSDT table memory at [mem 0xcdfb7000-0xcdfb7d52]
[    0.005373] ACPI: Reserving SSDT table memory at [mem 0xcdfb5000-0xcdfb60c4]
[    0.005374] ACPI: Reserving SSDT table memory at [mem 0xcdfb4000-0xcdfb4215]
[    0.005374] ACPI: Reserving SSDT table memory at [mem 0xcdfb3000-0xcdfb328c]
[    0.005375] ACPI: Reserving SSDT table memory at [mem 0xcdfaf000-0xcdfb262e]
[    0.005375] ACPI: Reserving FPDT table memory at [mem 0xcdfae000-0xcdfae043]
[    0.005376] ACPI: Reserving SSDT table memory at [mem 0xcdfad000-0xcdfad209]
[    0.005376] ACPI: Reserving SSDT table memory at [mem 0xcdfac000-0xcdfac6d9]
[    0.005377] ACPI: Reserving SSDT table memory at [mem 0xcdfab000-0xcdfab36d]
[    0.005378] ACPI: Reserving SSDT table memory at [mem 0xcdfaa000-0xcdfaa07c]
[    0.005378] ACPI: Reserving SSDT table memory at [mem 0xcdfa9000-0xcdfa94da]
[    0.005379] ACPI: Reserving BGRT table memory at [mem 0xcdfb9000-0xcdfb9037]
[    0.005433] No NUMA configuration found
[    0.005434] Faking a node at [mem 0x0000000000000000-0x000000080e2fffff]
[    0.005436] NODE_DATA(0) allocated [mem 0x80e2fb000-0x80e2fffff]
[    0.005463] Zone ranges:
[    0.005464]   DMA      [mem 0x0000000000001000-0x0000000000ffffff]
[    0.005465]   DMA32    [mem 0x0000000001000000-0x00000000ffffffff]
[    0.005467]   Normal   [mem 0x0000000100000000-0x000000080e2fffff]
[    0.005468]   Device   empty
[    0.005468] Movable zone start for each node
[    0.005469] Early memory node ranges
[    0.005469]   node   0: [mem 0x0000000000001000-0x000000000009efff]
[    0.005471]   node   0: [mem 0x0000000000100000-0x00000000099fffff]
[    0.005471]   node   0: [mem 0x0000000009e00000-0x0000000009efffff]
[    0.005472]   node   0: [mem 0x0000000009f0f000-0x00000000ab798fff]
[    0.005473]   node   0: [mem 0x00000000ac999000-0x00000000c9baefff]
[    0.005473]   node   0: [mem 0x00000000cdfff000-0x00000000cdffffff]
[    0.005474]   node   0: [mem 0x0000000100000000-0x000000080e2fffff]
[    0.005476] Initmem setup node 0 [mem 0x0000000000001000-0x000000080e2fffff]
[    0.005480] On node 0, zone DMA: 1 pages in unavailable ranges
[    0.005491] On node 0, zone DMA: 97 pages in unavailable ranges
[    0.005589] On node 0, zone DMA32: 1024 pages in unavailable ranges
[    0.008262] On node 0, zone DMA32: 15 pages in unavailable ranges
[    0.008840] On node 0, zone DMA32: 4608 pages in unavailable ranges
[    0.008942] On node 0, zone DMA32: 17488 pages in unavailable ranges
[    0.042645] On node 0, zone Normal: 8192 pages in unavailable ranges
[    0.042688] On node 0, zone Normal: 7424 pages in unavailable ranges
[    0.043580] ACPI: PM-Timer IO Port: 0x408
[    0.043587] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
[    0.043588] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
[    0.043589] ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1])
[    0.043589] ACPI: LAPIC_NMI (acpi_id[0x03] high edge lint[0x1])
[    0.043590] ACPI: LAPIC_NMI (acpi_id[0x04] high edge lint[0x1])
[    0.043590] ACPI: LAPIC_NMI (acpi_id[0x05] high edge lint[0x1])
[    0.043591] ACPI: LAPIC_NMI (acpi_id[0x06] high edge lint[0x1])
[    0.043591] ACPI: LAPIC_NMI (acpi_id[0x07] high edge lint[0x1])
[    0.043592] ACPI: LAPIC_NMI (acpi_id[0x08] high edge lint[0x1])
[    0.043592] ACPI: LAPIC_NMI (acpi_id[0x09] high edge lint[0x1])
[    0.043593] ACPI: LAPIC_NMI (acpi_id[0x0a] high edge lint[0x1])
[    0.043593] ACPI: LAPIC_NMI (acpi_id[0x0b] high edge lint[0x1])
[    0.043594] ACPI: LAPIC_NMI (acpi_id[0x0c] high edge lint[0x1])
[    0.043594] ACPI: LAPIC_NMI (acpi_id[0x0d] high edge lint[0x1])
[    0.043595] ACPI: LAPIC_NMI (acpi_id[0x0e] high edge lint[0x1])
[    0.043595] ACPI: LAPIC_NMI (acpi_id[0x0f] high edge lint[0x1])
[    0.043608] IOAPIC[0]: apic_id 33, version 33, address 0xfec00000, GSI 0-23
[    0.043613] IOAPIC[1]: apic_id 34, version 33, address 0xfec01000, GSI 24-55
[    0.043614] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[    0.043616] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level)
[    0.043619] ACPI: Using ACPI (MADT) for SMP configuration information
[    0.043620] ACPI: HPET id: 0x10228210 base: 0xfed00000
[    0.043627] e820: update [mem 0xb6b6a000-0xb6bc1fff] usable ==> reserved
[    0.043638] smpboot: Allowing 16 CPUs, 0 hotplug CPUs
[    0.043655] PM: hibernation: Registered nosave memory: [mem 0x00000000-0x00000fff]
[    0.043656] PM: hibernation: Registered nosave memory: [mem 0x0009f000-0x000bffff]
[    0.043657] PM: hibernation: Registered nosave memory: [mem 0x000c0000-0x000fffff]
[    0.043658] PM: hibernation: Registered nosave memory: [mem 0x09a00000-0x09dfffff]
[    0.043659] PM: hibernation: Registered nosave memory: [mem 0x09f00000-0x09f0efff]
[    0.043660] PM: hibernation: Registered nosave memory: [mem 0xab799000-0xac998fff]
[    0.043662] PM: hibernation: Registered nosave memory: [mem 0xb69e0000-0xb69e0fff]
[    0.043663] PM: hibernation: Registered nosave memory: [mem 0xb6b6a000-0xb6bc1fff]
[    0.043664] PM: hibernation: Registered nosave memory: [mem 0xc9baf000-0xc9f7efff]
[    0.043664] PM: hibernation: Registered nosave memory: [mem 0xc9f7f000-0xcbf7efff]
[    0.043665] PM: hibernation: Registered nosave memory: [mem 0xcbf7f000-0xcdf7efff]
[    0.043665] PM: hibernation: Registered nosave memory: [mem 0xcdf7f000-0xcdffefff]
[    0.043666] PM: hibernation: Registered nosave memory: [mem 0xce000000-0xcfffffff]
[    0.043667] PM: hibernation: Registered nosave memory: [mem 0xd0000000-0xfebfffff]
[    0.043667] PM: hibernation: Registered nosave memory: [mem 0xfec00000-0xfec01fff]
[    0.043668] PM: hibernation: Registered nosave memory: [mem 0xfec02000-0xfec0ffff]
[    0.043668] PM: hibernation: Registered nosave memory: [mem 0xfec10000-0xfec10fff]
[    0.043669] PM: hibernation: Registered nosave memory: [mem 0xfec11000-0xfec1ffff]
[    0.043669] PM: hibernation: Registered nosave memory: [mem 0xfec20000-0xfec20fff]
[    0.043670] PM: hibernation: Registered nosave memory: [mem 0xfec21000-0xfed7ffff]
[    0.043670] PM: hibernation: Registered nosave memory: [mem 0xfed80000-0xfed81fff]
[    0.043671] PM: hibernation: Registered nosave memory: [mem 0xfed82000-0xfedfffff]
[    0.043671] PM: hibernation: Registered nosave memory: [mem 0xfee00000-0xfee00fff]
[    0.043672] PM: hibernation: Registered nosave memory: [mem 0xfee01000-0xffffffff]
[    0.043673] [mem 0xd0000000-0xfebfffff] available for PCI devices
[    0.043674] Booting paravirtualized kernel on bare hardware
[    0.043676] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1910969940391419 ns
[    0.048244] setup_percpu: NR_CPUS:320 nr_cpumask_bits:16 nr_cpu_ids:16 nr_node_ids:1
[    0.048675] percpu: Embedded 64 pages/cpu s225280 r8192 d28672 u262144
[    0.048680] pcpu-alloc: s225280 r8192 d28672 u262144 alloc=1*2097152
[    0.048682] pcpu-alloc: [0] 00 01 02 03 04 05 06 07 [0] 08 09 10 11 12 13 14 15
[    0.048701] Fallback order for Node 0: 0
[    0.048703] Built 1 zonelists, mobility grouping on.  Total pages: 8090110
[    0.048704] Policy zone: Normal
[    0.048705] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-x86_64 lang=en_US keytable=us tz=UTC misobasedir=garuda root=miso:LABEL=GARUDA_HYPRLAND_RAPTOR quiet systemd.show_status=1 ibt=off rd.debug driver=nonfree nouveau.modeset=0 i915.modeset=1 radeon.modeset=1 rdinit=/vtoy/vtoy
[    0.048835] Unknown kernel command line parameters "BOOT_IMAGE=/boot/vmlinuz-x86_64 lang=en_US keytable=us tz=UTC misobasedir=garuda driver=nonfree", will be passed to user space.
[    0.048868] random: crng init done
[    0.051089] Dentry cache hash table entries: 4194304 (order: 13, 33554432 bytes, linear)
[    0.052298] Inode-cache hash table entries: 2097152 (order: 12, 16777216 bytes, linear)
[    0.052523] mem auto-init: stack:all(zero), heap alloc:on, heap free:off
[    0.052565] software IO TLB: area num 16.
[    0.100512] Memory: 31933792K/32874748K available (18432K kernel code, 2126K rwdata, 12508K rodata, 3512K init, 3656K bss, 940696K reserved, 0K cma-reserved)
[    0.100602] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=16, Nodes=1
[    0.100623] ftrace: allocating 44997 entries in 176 pages
[    0.110020] ftrace: allocated 176 pages with 3 groups
[    0.110078] Dynamic Preempt: full
[    0.110108] rcu: Preemptible hierarchical RCU implementation.
[    0.110108] rcu:     RCU restricting CPUs from NR_CPUS=320 to nr_cpu_ids=16.
[    0.110109] rcu:     RCU priority boosting: priority 1 delay 500 ms.
[    0.110110]  Trampoline variant of Tasks RCU enabled.
[    0.110110]  Rude variant of Tasks RCU enabled.
[    0.110110]  Tracing variant of Tasks RCU enabled.
[    0.110111] rcu: RCU calculated value of scheduler-enlistment delay is 100 jiffies.
[    0.110111] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=16
[    0.111949] NR_IRQS: 20736, nr_irqs: 1096, preallocated irqs: 16
[    0.112125] rcu: srcu_init: Setting srcu_struct sizes based on contention.
[    0.112217] kfence: initialized - using 2097152 bytes for 255 objects at 0x(____ptrval____)-0x(____ptrval____)
[    0.112243] Console: colour dummy device 80x25
[    0.112245] printk: console [tty0] enabled
[    0.112275] ACPI: Core revision 20221020
[    0.112536] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 133484873504 ns
[    0.112553] APIC: Switch to symmetric I/O mode setup
[    0.113221] AMD-Vi: ivrs, add hid:AMDI0020, uid:\_SB.FUR0, rdevid:160
[    0.113222] AMD-Vi: ivrs, add hid:AMDI0020, uid:\_SB.FUR1, rdevid:160
[    0.113223] AMD-Vi: ivrs, add hid:AMDI0020, uid:\_SB.FUR2, rdevid:160
[    0.113224] AMD-Vi: ivrs, add hid:AMDI0020, uid:\_SB.FUR3, rdevid:160
[    0.113225] AMD-Vi: Using global IVHD EFR:0x206d73ef22254ade, EFR2:0x0
[    0.113496] Switched APIC routing to physical flat.
[    0.114239] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[    0.118559] clocksource: tsc-early: mask: 0xffffffffffffffff max_cycles: 0x2e0a08dda7f, max_idle_ns: 440795338037 ns
[    0.118563] Calibrating delay loop (skipped), value calculated using timer frequency.. 6387.93 BogoMIPS (lpj=3193969)
[    0.118565] pid_max: default: 32768 minimum: 301
[    0.121588] LSM: initializing lsm=capability,landlock,lockdown,yama,integrity,bpf
[    0.121600] landlock: Up and running.
[    0.121602] Yama: becoming mindful.
[    0.121609] LSM support for eBPF active
[    0.121646] Mount-cache hash table entries: 65536 (order: 7, 524288 bytes, linear)
[    0.121668] Mountpoint-cache hash table entries: 65536 (order: 7, 524288 bytes, linear)
[    0.122630] x86/cpu: User Mode Instruction Prevention (UMIP) activated
[    0.122654] LVT offset 1 assigned for vector 0xf9
[    0.122720] LVT offset 2 assigned for vector 0xf4
[    0.122739] process: using mwait in idle threads
[    0.122742] Last level iTLB entries: 4KB 512, 2MB 512, 4MB 256
[    0.122743] Last level dTLB entries: 4KB 2048, 2MB 2048, 4MB 1024, 1GB 0
[    0.122747] Spectre V1 : Mitigation: usercopy/swapgs barriers and __user pointer sanitization
[    0.122749] Spectre V2 : Mitigation: Retpolines
[    0.122750] Spectre V2 : Spectre v2 / SpectreRSB mitigation: Filling RSB on context switch
[    0.122750] Spectre V2 : Spectre v2 / SpectreRSB : Filling RSB on VMEXIT
[    0.122751] Spectre V2 : Enabling Restricted Speculation for firmware calls
[    0.122752] Spectre V2 : mitigation: Enabling conditional Indirect Branch Prediction Barrier
[    0.122753] Spectre V2 : User space: Mitigation: STIBP always-on protection
[    0.122754] Speculative Store Bypass: Mitigation: Speculative Store Bypass disabled via prctl
[    0.140720] Freeing SMP alternatives memory: 48K
[    0.244311] smpboot: CPU0: AMD Ryzen 7 5800H with Radeon Graphics (family: 0x19, model: 0x50, stepping: 0x0)
[    0.244421] cblist_init_generic: Setting adjustable number of callback queues.
[    0.244423] cblist_init_generic: Setting shift to 4 and lim to 1.
[    0.244435] cblist_init_generic: Setting shift to 4 and lim to 1.
[    0.244447] cblist_init_generic: Setting shift to 4 and lim to 1.
[    0.244455] Performance Events: Fam17h+ core perfctr, AMD PMU driver.
[    0.244459] ... version:                0
[    0.244460] ... bit width:              48
[    0.244460] ... generic registers:      6
[    0.244460] ... value mask:             0000ffffffffffff
[    0.244461] ... max period:             00007fffffffffff
[    0.244461] ... fixed-purpose events:   0
[    0.244462] ... event mask:             000000000000003f
[    0.244526] rcu: Hierarchical SRCU implementation.
[    0.244527] rcu:     Max phase no-delay instances is 400.
[    0.244560] NMI watchdog: Enabled. Permanently consumes one hw-PMU counter.
[    0.244560] smp: Bringing up secondary CPUs ...
[    0.244560] x86: Booting SMP configuration:
[    0.244560] .... node  #0, CPUs:        #1
[    0.245655] Spectre V2 : Update user space SMT mitigation: STIBP always-on
[    0.245703]   #2  #3  #4  #5  #6  #7  #8  #9 #10 #11 #12 #13 #14 #15
[    0.263567] smp: Brought up 1 node, 16 CPUs
[    0.263569] smpboot: Max logical packages: 1
[    0.263570] smpboot: Total of 16 processors activated (102207.00 BogoMIPS)
[    0.264903] devtmpfs: initialized
[    0.264903] x86/mm: Memory block size: 128MB
[    0.266466] ACPI: PM: Registering ACPI NVS region [mem 0x09f00000-0x09f0efff] (61440 bytes)
[    0.266466] ACPI: PM: Registering ACPI NVS region [mem 0xcbf7f000-0xcdf7efff] (33554432 bytes)
[    0.266919] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1911260446275000 ns
[    0.266932] futex hash table entries: 4096 (order: 6, 262144 bytes, linear)
[    0.266975] pinctrl core: initialized pinctrl subsystem
[    0.267053] PM: RTC time: 09:02:51, date: 2023-06-22
[    0.267334] NET: Registered PF_NETLINK/PF_ROUTE protocol family
[    0.267573] DMA: preallocated 4096 KiB GFP_KERNEL pool for atomic allocations
[    0.267751] DMA: preallocated 4096 KiB GFP_KERNEL|GFP_DMA pool for atomic allocations
[    0.267972] DMA: preallocated 4096 KiB GFP_KERNEL|GFP_DMA32 pool for atomic allocations
[    0.267982] audit: initializing netlink subsys (disabled)
[    0.267990] audit: type=2000 audit(1687424571.155:1): state=initialized audit_enabled=0 res=1
[    0.267990] thermal_sys: Registered thermal governor 'fair_share'
[    0.267990] thermal_sys: Registered thermal governor 'bang_bang'
[    0.267990] thermal_sys: Registered thermal governor 'step_wise'
[    0.267990] thermal_sys: Registered thermal governor 'user_space'
[    0.267990] thermal_sys: Registered thermal governor 'power_allocator'
[    0.267990] cpuidle: using governor ladder
[    0.267990] cpuidle: using governor menu
[    0.267990] Simple Boot Flag value 0x0 read from CMOS RAM was invalid
[    0.267990] Simple Boot Flag at 0x44 set to 0x80
[    0.267990] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[    0.267990] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf8000000-0xfbffffff] (base 0xf8000000)
[    0.267990] PCI: not using MMCONFIG
[    0.267990] PCI: Using configuration type 1 for base access
[    0.267990] PCI: Using configuration type 1 for extended access
[    0.268634] kprobes: kprobe jump-optimization is enabled. All kprobes are optimized if possible.
[    0.275730] HugeTLB: registered 1.00 GiB page size, pre-allocated 0 pages
[    0.275732] HugeTLB: 16380 KiB vmemmap can be freed for a 1.00 GiB page
[    0.275733] HugeTLB: registered 2.00 MiB page size, pre-allocated 0 pages
[    0.275734] HugeTLB: 28 KiB vmemmap can be freed for a 2.00 MiB page
[    0.276045] ACPI: Added _OSI(Module Device)
[    0.276046] ACPI: Added _OSI(Processor Device)
[    0.276047] ACPI: Added _OSI(3.0 _SCP Extensions)
[    0.276048] ACPI: Added _OSI(Processor Aggregator Device)
[    0.290827] ACPI BIOS Error (bug): Failure creating named object [\_SB.PCI0.GP17.XHC0._S0W], AE_ALREADY_EXISTS (20221020/dswload2-326)
[    0.290833] ACPI Error: AE_ALREADY_EXISTS, During name lookup/catalog (20221020/psobject-220)
[    0.290834] ACPI: Skipping parse of AML opcode: Method (0x0014)
[    0.290853] ACPI BIOS Error (bug): Failure creating named object [\_SB.PCI0.GP17.XHC1._S0W], AE_ALREADY_EXISTS (20221020/dswload2-326)
[    0.290856] ACPI Error: AE_ALREADY_EXISTS, During name lookup/catalog (20221020/psobject-220)
[    0.290857] ACPI: Skipping parse of AML opcode: Method (0x0014)
[    0.291457] ACPI: 23 ACPI AML tables successfully acquired and loaded
[    0.292603] ACPI: [Firmware Bug]: BIOS _OSI(Linux) query ignored
[    0.294126] ACPI: EC: EC started
[    0.294127] ACPI: EC: interrupt blocked
[    0.294356] ACPI: EC: EC_CMD/EC_SC=0x66, EC_DATA=0x62
[    0.294357] ACPI: \_SB_.PCI0.LPC0.EC0_: Boot DSDT EC used to handle transactions
[    0.294358] ACPI: Interpreter enabled
[    0.294370] ACPI: PM: (supports S0 S4 S5)
[    0.294371] ACPI: Using IOAPIC for interrupt routing
[    0.294902] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf8000000-0xfbffffff] (base 0xf8000000)
[    0.296752] [Firmware Info]: PCI: MMCONFIG at [mem 0xf8000000-0xfbffffff] not reserved in ACPI motherboard resources
[    0.296754] PCI: MMCONFIG at [mem 0xf8000000-0xfbffffff] reserved as EfiMemoryMappedIO
[    0.296761] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[    0.296761] PCI: Ignoring E820 reservations for host bridge windows
[    0.297083] ACPI: Enabled 2 GPEs in block 00 to 1F
[    0.297726] ACPI: \_SB_.PCI0.GPP0.PG00: New power resource
[    0.297937] ACPI: \_SB_.PCI0.GPP1.P0NV: New power resource
[    0.298106] ACPI: \_SB_.PCI0.GPP3.WLAN.WRST: New power resource
[    0.298232] ACPI: \_SB_.PCI0.GPP6.P0NV: New power resource
[    0.298533] ACPI: \_SB_.PCI0.GP17.XHC0.P0U0: New power resource
[    0.298605] ACPI: \_SB_.PCI0.GP17.XHC0.P3U0: New power resource
[    0.299263] ACPI: \_SB_.PCI0.GP17.XHC1.P0U1: New power resource
[    0.299324] ACPI: \_SB_.PCI0.GP17.XHC1.P3U1: New power resource
[    0.348950] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[    0.348954] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI EDR HPX-Type3]
[    0.349010] acpi PNP0A08:00: _OSC: platform does not support [SHPCHotplug LTR DPC]
[    0.349107] acpi PNP0A08:00: _OSC: OS now controls [PCIeHotplug PME AER PCIeCapability]
[    0.349116] acpi PNP0A08:00: [Firmware Info]: MMCONFIG for domain 0000 [bus 00-3f] only partially covers this bridge
[    0.349377] PCI host bridge to bus 0000:00
[    0.349378] pci_bus 0000:00: root bus resource [io  0x0000-0x0cf7 window]
[    0.349379] pci_bus 0000:00: root bus resource [io  0x0d00-0xffff window]
[    0.349380] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]
[    0.349381] pci_bus 0000:00: root bus resource [mem 0x000c0000-0x000cffff window]
[    0.349382] pci_bus 0000:00: root bus resource [mem 0x000d0000-0x000effff window]
[    0.349382] pci_bus 0000:00: root bus resource [mem 0xd0000000-0xf7ffffff window]
[    0.349383] pci_bus 0000:00: root bus resource [mem 0xfc000000-0xfeafffff window]
[    0.349384] pci_bus 0000:00: root bus resource [mem 0xfed45000-0xfed811ff window]
[    0.349384] pci_bus 0000:00: root bus resource [mem 0xfed81900-0xfed81fff window]
[    0.349385] pci_bus 0000:00: root bus resource [mem 0xfedc0000-0xfedc0fff window]
[    0.349386] pci_bus 0000:00: root bus resource [mem 0xfedc6000-0xfedc6fff window]
[    0.349386] pci_bus 0000:00: root bus resource [mem 0x850200000-0xfcffffffff window]
[    0.349387] pci_bus 0000:00: root bus resource [bus 00-ff]
[    0.349398] pci 0000:00:00.0: [1022:1630] type 00 class 0x060000
[    0.349459] pci 0000:00:00.2: [1022:1631] type 00 class 0x080600
[    0.349520] pci 0000:00:01.0: [1022:1632] type 00 class 0x060000
[    0.349583] pci 0000:00:01.1: [1022:1633] type 01 class 0x060400
[    0.349632] pci 0000:00:01.1: PME# supported from D0 D3hot D3cold
[    0.349987] pci 0000:00:01.2: [1022:1634] type 01 class 0x060400
[    0.350038] pci 0000:00:01.2: PME# supported from D0 D3hot D3cold
[    0.350109] pci 0000:00:01.3: [1022:1634] type 01 class 0x060400
[    0.350156] pci 0000:00:01.3: PME# supported from D0 D3hot D3cold
[    0.350219] pci 0000:00:02.0: [1022:1632] type 00 class 0x060000
[    0.350272] pci 0000:00:02.1: [1022:1634] type 01 class 0x060400
[    0.350320] pci 0000:00:02.1: PME# supported from D0 D3hot D3cold
[    0.350385] pci 0000:00:02.4: [1022:1634] type 01 class 0x060400
[    0.350433] pci 0000:00:02.4: PME# supported from D0 D3hot D3cold
[    0.350502] pci 0000:00:08.0: [1022:1632] type 00 class 0x060000
[    0.350554] pci 0000:00:08.1: [1022:1635] type 01 class 0x060400
[    0.350575] pci 0000:00:08.1: enabling Extended Tags
[    0.350604] pci 0000:00:08.1: PME# supported from D0 D3hot D3cold
[    0.350683] pci 0000:00:08.2: [1022:1635] type 01 class 0x060400
[    0.350703] pci 0000:00:08.2: enabling Extended Tags
[    0.350731] pci 0000:00:08.2: PME# supported from D0 D3hot D3cold
[    0.350819] pci 0000:00:14.0: [1022:790b] type 00 class 0x0c0500
[    0.350919] pci 0000:00:14.3: [1022:790e] type 00 class 0x060100
[    0.351032] pci 0000:00:18.0: [1022:166a] type 00 class 0x060000
[    0.351065] pci 0000:00:18.1: [1022:166b] type 00 class 0x060000
[    0.351097] pci 0000:00:18.2: [1022:166c] type 00 class 0x060000
[    0.351128] pci 0000:00:18.3: [1022:166d] type 00 class 0x060000
[    0.351160] pci 0000:00:18.4: [1022:166e] type 00 class 0x060000
[    0.351192] pci 0000:00:18.5: [1022:166f] type 00 class 0x060000
[    0.351226] pci 0000:00:18.6: [1022:1670] type 00 class 0x060000
[    0.351261] pci 0000:00:18.7: [1022:1671] type 00 class 0x060000
[    0.351344] pci 0000:01:00.0: [10de:25a0] type 00 class 0x030000
[    0.351352] pci 0000:01:00.0: reg 0x10: [mem 0xd0000000-0xd0ffffff]
[    0.351360] pci 0000:01:00.0: reg 0x14: [mem 0xfb00000000-0xfbffffffff 64bit pref]
[    0.351367] pci 0000:01:00.0: reg 0x1c: [mem 0xfc00000000-0xfc01ffffff 64bit pref]
[    0.351371] pci 0000:01:00.0: reg 0x24: [io  0x3000-0x307f]
[    0.351375] pci 0000:01:00.0: reg 0x30: [mem 0xfff80000-0xffffffff pref]
[    0.351424] pci 0000:01:00.0: PME# supported from D0 D3hot
[    0.351490] pci 0000:01:00.0: 63.008 Gb/s available PCIe bandwidth, limited by 8.0 GT/s PCIe x8 link at 0000:00:01.1 (capable of 252.048 Gb/s with 16.0 GT/s PCIe x16 link)
[    0.351652] pci 0000:01:00.1: [10de:2291] type 00 class 0x040300
[    0.351661] pci 0000:01:00.1: reg 0x10: [mem 0xd1000000-0xd1003fff]
[    0.351775] pci 0000:00:01.1: PCI bridge to [bus 01]
[    0.351778] pci 0000:00:01.1:   bridge window [io  0x3000-0x3fff]
[    0.351780] pci 0000:00:01.1:   bridge window [mem 0xd0000000-0xd10fffff]
[    0.351782] pci 0000:00:01.1:   bridge window [mem 0xfb00000000-0xfc01ffffff 64bit pref]
[    0.352194] pci 0000:02:00.0: [15b7:5006] type 00 class 0x010802
[    0.352210] pci 0000:02:00.0: reg 0x10: [mem 0xd1900000-0xd1903fff 64bit]
[    0.352232] pci 0000:02:00.0: reg 0x20: [mem 0xd1904000-0xd19040ff 64bit]
[    0.352419] pci 0000:00:01.2: PCI bridge to [bus 02]
[    0.352423] pci 0000:00:01.2:   bridge window [mem 0xd1900000-0xd19fffff]
[    0.352463] pci 0000:03:00.0: [10ec:8125] type 00 class 0x020000
[    0.352478] pci 0000:03:00.0: reg 0x10: [io  0x2000-0x20ff]
[    0.352498] pci 0000:03:00.0: reg 0x18: [mem 0xd1800000-0xd180ffff 64bit]
[    0.352511] pci 0000:03:00.0: reg 0x20: [mem 0xd1810000-0xd1813fff 64bit]
[    0.352600] pci 0000:03:00.0: supports D1 D2
[    0.352601] pci 0000:03:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[    0.352758] pci 0000:00:01.3: PCI bridge to [bus 03]
[    0.352761] pci 0000:00:01.3:   bridge window [io  0x2000-0x2fff]
[    0.352762] pci 0000:00:01.3:   bridge window [mem 0xd1800000-0xd18fffff]
[    0.353016] pci 0000:04:00.0: [8086:2723] type 00 class 0x028000
[    0.353067] pci 0000:04:00.0: reg 0x10: [mem 0xd1700000-0xd1703fff 64bit]
[    0.353236] pci 0000:04:00.0: PME# supported from D0 D3hot D3cold
[    0.354153] pci 0000:00:02.1: PCI bridge to [bus 04]
[    0.354156] pci 0000:00:02.1:   bridge window [mem 0xd1700000-0xd17fffff]
[    0.354572] pci 0000:05:00.0: [1987:5016] type 00 class 0x010802
[    0.354587] pci 0000:05:00.0: reg 0x10: [mem 0xd1600000-0xd1603fff 64bit]
[    0.354742] pci 0000:05:00.0: 31.504 Gb/s available PCIe bandwidth, limited by 8.0 GT/s PCIe x4 link at 0000:00:02.4 (capable of 63.012 Gb/s with 16.0 GT/s PCIe x4 link)
[    0.354889] pci 0000:00:02.4: PCI bridge to [bus 05]
[    0.354893] pci 0000:00:02.4:   bridge window [mem 0xd1600000-0xd16fffff]
[    0.354943] pci 0000:06:00.0: [1002:1638] type 00 class 0x030000
[    0.354953] pci 0000:06:00.0: reg 0x10: [mem 0xfc10000000-0xfc1fffffff 64bit pref]
[    0.354960] pci 0000:06:00.0: reg 0x18: [mem 0xfc20000000-0xfc201fffff 64bit pref]
[    0.354965] pci 0000:06:00.0: reg 0x20: [io  0x1000-0x10ff]
[    0.354969] pci 0000:06:00.0: reg 0x24: [mem 0xd1500000-0xd157ffff]
[    0.354977] pci 0000:06:00.0: enabling Extended Tags
[    0.354987] pci 0000:06:00.0: BAR 0: assigned to efifb
[    0.355023] pci 0000:06:00.0: PME# supported from D1 D2 D3hot D3cold
[    0.355056] pci 0000:06:00.0: 126.016 Gb/s available PCIe bandwidth, limited by 8.0 GT/s PCIe x16 link at 0000:00:08.1 (capable of 252.048 Gb/s with 16.0 GT/s PCIe x16 link)
[    0.355116] pci 0000:06:00.1: [1002:1637] type 00 class 0x040300
[    0.355123] pci 0000:06:00.1: reg 0x10: [mem 0xd15c8000-0xd15cbfff]
[    0.355142] pci 0000:06:00.1: enabling Extended Tags
[    0.355170] pci 0000:06:00.1: PME# supported from D1 D2 D3hot D3cold
[    0.355230] pci 0000:06:00.2: [1022:15df] type 00 class 0x108000
[    0.355242] pci 0000:06:00.2: reg 0x18: [mem 0xd1400000-0xd14fffff]
[    0.355251] pci 0000:06:00.2: reg 0x24: [mem 0xd15cc000-0xd15cdfff]
[    0.355257] pci 0000:06:00.2: enabling Extended Tags
[    0.355334] pci 0000:06:00.3: [1022:1639] type 00 class 0x0c0330
[    0.355344] pci 0000:06:00.3: reg 0x10: [mem 0xd1200000-0xd12fffff 64bit]
[    0.355366] pci 0000:06:00.3: enabling Extended Tags
[    0.355395] pci 0000:06:00.3: PME# supported from D0 D3hot D3cold
[    0.355449] pci 0000:06:00.4: [1022:1639] type 00 class 0x0c0330
[    0.355459] pci 0000:06:00.4: reg 0x10: [mem 0xd1300000-0xd13fffff 64bit]
[    0.355481] pci 0000:06:00.4: enabling Extended Tags
[    0.355511] pci 0000:06:00.4: PME# supported from D0 D3hot D3cold
[    0.355596] pci 0000:06:00.5: [1022:15e2] type 00 class 0x048000
[    0.355603] pci 0000:06:00.5: reg 0x10: [mem 0xd1580000-0xd15bffff]
[    0.355622] pci 0000:06:00.5: enabling Extended Tags
[    0.355649] pci 0000:06:00.5: PME# supported from D0 D3hot D3cold
[    0.355699] pci 0000:06:00.6: [1022:15e3] type 00 class 0x040300
[    0.355705] pci 0000:06:00.6: reg 0x10: [mem 0xd15c0000-0xd15c7fff]
[    0.355725] pci 0000:06:00.6: enabling Extended Tags
[    0.355752] pci 0000:06:00.6: PME# supported from D0 D3hot D3cold
[    0.355823] pci 0000:00:08.1: PCI bridge to [bus 06]
[    0.355825] pci 0000:00:08.1:   bridge window [io  0x1000-0x1fff]
[    0.355827] pci 0000:00:08.1:   bridge window [mem 0xd1200000-0xd15fffff]
[    0.355829] pci 0000:00:08.1:   bridge window [mem 0xfc10000000-0xfc201fffff 64bit pref]
[    0.355861] pci 0000:07:00.0: [1022:7901] type 00 class 0x010601
[    0.355887] pci 0000:07:00.0: reg 0x24: [mem 0xd1101000-0xd11017ff]
[    0.355895] pci 0000:07:00.0: enabling Extended Tags
[    0.355958] pci 0000:07:00.0: 126.016 Gb/s available PCIe bandwidth, limited by 8.0 GT/s PCIe x16 link at 0000:00:08.2 (capable of 252.048 Gb/s with 16.0 GT/s PCIe x16 link)
[    0.356007] pci 0000:07:00.1: [1022:7901] type 00 class 0x010601
[    0.356034] pci 0000:07:00.1: reg 0x24: [mem 0xd1100000-0xd11007ff]
[    0.356041] pci 0000:07:00.1: enabling Extended Tags
[    0.356125] pci 0000:00:08.2: PCI bridge to [bus 07]
[    0.356128] pci 0000:00:08.2:   bridge window [mem 0xd1100000-0xd11fffff]
[    0.400868] ACPI: PCI: Interrupt link LNKA configured for IRQ 0
[    0.400870] ACPI: PCI: Interrupt link LNKA disabled
[    0.400940] ACPI: PCI: Interrupt link LNKB configured for IRQ 0
[    0.400941] ACPI: PCI: Interrupt link LNKB disabled
[    0.400992] ACPI: PCI: Interrupt link LNKC configured for IRQ 0
[    0.400993] ACPI: PCI: Interrupt link LNKC disabled
[    0.401059] ACPI: PCI: Interrupt link LNKD configured for IRQ 0
[    0.401061] ACPI: PCI: Interrupt link LNKD disabled
[    0.401123] ACPI: PCI: Interrupt link LNKE configured for IRQ 0
[    0.401124] ACPI: PCI: Interrupt link LNKE disabled
[    0.401171] ACPI: PCI: Interrupt link LNKF configured for IRQ 0
[    0.401172] ACPI: PCI: Interrupt link LNKF disabled
[    0.401219] ACPI: PCI: Interrupt link LNKG configured for IRQ 0
[    0.401220] ACPI: PCI: Interrupt link LNKG disabled
[    0.401266] ACPI: PCI: Interrupt link LNKH configured for IRQ 0
[    0.401267] ACPI: PCI: Interrupt link LNKH disabled
[    0.402102] Low-power S0 idle used by default for system suspend
[    0.403232] ACPI: EC: interrupt unblocked
[    0.403233] ACPI: EC: event unblocked
[    0.403561] ACPI: EC: EC_CMD/EC_SC=0x66, EC_DATA=0x62
[    0.403561] ACPI: EC: GPE=0x3
[    0.403561] ACPI: \_SB_.PCI0.LPC0.EC0_: Boot DSDT EC initialization complete
[    0.403561] ACPI: \_SB_.PCI0.LPC0.EC0_: EC: Used to handle transactions and events
[    0.403590] iommu: Default domain type: Translated
[    0.403590] iommu: DMA domain TLB invalidation policy: lazy mode
[    0.403658] SCSI subsystem initialized
[    0.403662] libata version 3.00 loaded.
[    0.403662] ACPI: bus type USB registered
[    0.403662] usbcore: registered new interface driver usbfs
[    0.403662] usbcore: registered new interface driver hub
[    0.403662] usbcore: registered new device driver usb
[    0.450561] pps_core: LinuxPPS API ver. 1 registered
[    0.450561] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
[    0.450561] PTP clock support registered
[    0.450561] EDAC MC: Ver: 3.0.0
[    0.452570] efivars: Registered efivars operations
[    0.453713] NetLabel: Initializing
[    0.453715] NetLabel:  domain hash size = 128
[    0.453716] NetLabel:  protocols = UNLABELED CIPSOv4 CALIPSO
[    0.453726] NetLabel:  unlabeled traffic allowed by default
[    0.453728] mctp: management component transport protocol core
[    0.453729] NET: Registered PF_MCTP protocol family
[    0.453732] PCI: Using ACPI for IRQ routing
[    0.455473] PCI: pci_cache_line_size set to 64 bytes
[    0.457966] resource: Expanded resource Reserved due to conflict with PCI Bus 0000:00
[    0.457967] e820: reserve RAM buffer [mem 0x0009f000-0x0009ffff]
[    0.457968] e820: reserve RAM buffer [mem 0x09a00000-0x0bffffff]
[    0.457969] e820: reserve RAM buffer [mem 0x09f00000-0x0bffffff]
[    0.457970] e820: reserve RAM buffer [mem 0xab799000-0xabffffff]
[    0.457970] e820: reserve RAM buffer [mem 0xb69e0000-0xb7ffffff]
[    0.457971] e820: reserve RAM buffer [mem 0xb6b6a000-0xb7ffffff]
[    0.457972] e820: reserve RAM buffer [mem 0xc9baf000-0xcbffffff]
[    0.457972] e820: reserve RAM buffer [mem 0xce000000-0xcfffffff]
[    0.457973] e820: reserve RAM buffer [mem 0x80e300000-0x80fffffff]
[    0.457997] pci 0000:01:00.0: vgaarb: setting as boot VGA device
[    0.457997] pci 0000:01:00.0: vgaarb: bridge control possible
[    0.457997] pci 0000:01:00.0: vgaarb: VGA device added: decodes=io+mem,owns=none,locks=none
[    0.457997] pci 0000:06:00.0: vgaarb: setting as boot VGA device (overriding previous)
[    0.457997] pci 0000:06:00.0: vgaarb: bridge control possible
[    0.457997] pci 0000:06:00.0: vgaarb: VGA device added: decodes=io+mem,owns=none,locks=none
[    0.457997] vgaarb: loaded
[    0.457997] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
[    0.457997] hpet0: 3 comparators, 32-bit 14.318180 MHz counter
[    0.459607] clocksource: Switched to clocksource tsc-early
[    0.459678] VFS: Disk quotas dquot_6.6.0
[    0.459686] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[    0.459739] pnp: PnP ACPI init
[    0.459870] system 00:00: [mem 0xfec00000-0xfec01fff] could not be reserved
[    0.459870] system 00:00: [mem 0xfee00000-0xfee00fff] has been reserved
[    0.459870] system 00:00: [mem 0xfde00000-0xfdefffff] has been reserved
[    0.460056] system 00:04: [io  0x0400-0x04cf] has been reserved
[    0.460058] system 00:04: [io  0x04d0-0x04d1] has been reserved
[    0.460058] system 00:04: [io  0x04d6] has been reserved
[    0.460059] system 00:04: [io  0x0c00-0x0c01] has been reserved
[    0.460060] system 00:04: [io  0x0c14] has been reserved
[    0.460060] system 00:04: [io  0x0c50-0x0c52] has been reserved
[    0.460061] system 00:04: [io  0x0c6c] has been reserved
[    0.460062] system 00:04: [io  0x0c6f] has been reserved
[    0.460062] system 00:04: [io  0x0cd0-0x0cdb] has been reserved
[    0.460100] system 00:05: [mem 0xff000000-0xffffffff] has been reserved
[    0.505675] pnp: PnP ACPI: found 6 devices
[    0.511176] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
[    0.511215] NET: Registered PF_INET protocol family
[    0.511352] IP idents hash table entries: 262144 (order: 9, 2097152 bytes, linear)
[    0.513462] tcp_listen_portaddr_hash hash table entries: 16384 (order: 6, 262144 bytes, linear)
[    0.513494] Table-perturb hash table entries: 65536 (order: 6, 262144 bytes, linear)
[    0.513636] TCP established hash table entries: 262144 (order: 9, 2097152 bytes, linear)
[    0.513947] TCP bind hash table entries: 65536 (order: 9, 2097152 bytes, linear)
[    0.514055] TCP: Hash tables configured (established 262144 bind 65536)
[    0.514160] MPTCP token hash table entries: 32768 (order: 7, 786432 bytes, linear)
[    0.514218] UDP hash table entries: 16384 (order: 7, 524288 bytes, linear)
[    0.514291] UDP-Lite hash table entries: 16384 (order: 7, 524288 bytes, linear)
[    0.514355] NET: Registered PF_UNIX/PF_LOCAL protocol family
[    0.514360] NET: Registered PF_XDP protocol family
[    0.514362] pci 0000:01:00.0: can't claim BAR 6 [mem 0xfff80000-0xffffffff pref]: no compatible bridge window
[    0.514371] pci 0000:01:00.0: BAR 6: assigned [mem 0xd1080000-0xd10fffff pref]
[    0.514373] pci 0000:00:01.1: PCI bridge to [bus 01]
[    0.514375] pci 0000:00:01.1:   bridge window [io  0x3000-0x3fff]
[    0.514378] pci 0000:00:01.1:   bridge window [mem 0xd0000000-0xd10fffff]
[    0.514379] pci 0000:00:01.1:   bridge window [mem 0xfb00000000-0xfc01ffffff 64bit pref]
[    0.514383] pci 0000:00:01.2: PCI bridge to [bus 02]
[    0.514385] pci 0000:00:01.2:   bridge window [mem 0xd1900000-0xd19fffff]
[    0.514389] pci 0000:00:01.3: PCI bridge to [bus 03]
[    0.514390] pci 0000:00:01.3:   bridge window [io  0x2000-0x2fff]
[    0.514392] pci 0000:00:01.3:   bridge window [mem 0xd1800000-0xd18fffff]
[    0.514396] pci 0000:00:02.1: PCI bridge to [bus 04]
[    0.514398] pci 0000:00:02.1:   bridge window [mem 0xd1700000-0xd17fffff]
[    0.514402] pci 0000:00:02.4: PCI bridge to [bus 05]
[    0.514404] pci 0000:00:02.4:   bridge window [mem 0xd1600000-0xd16fffff]
[    0.514408] pci 0000:00:08.1: PCI bridge to [bus 06]
[    0.514409] pci 0000:00:08.1:   bridge window [io  0x1000-0x1fff]
[    0.514411] pci 0000:00:08.1:   bridge window [mem 0xd1200000-0xd15fffff]
[    0.514413] pci 0000:00:08.1:   bridge window [mem 0xfc10000000-0xfc201fffff 64bit pref]
[    0.514416] pci 0000:00:08.2: PCI bridge to [bus 07]
[    0.514418] pci 0000:00:08.2:   bridge window [mem 0xd1100000-0xd11fffff]
[    0.514422] pci_bus 0000:00: resource 4 [io  0x0000-0x0cf7 window]
[    0.514423] pci_bus 0000:00: resource 5 [io  0x0d00-0xffff window]
[    0.514424] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window]
[    0.514425] pci_bus 0000:00: resource 7 [mem 0x000c0000-0x000cffff window]
[    0.514426] pci_bus 0000:00: resource 8 [mem 0x000d0000-0x000effff window]
[    0.514426] pci_bus 0000:00: resource 9 [mem 0xd0000000-0xf7ffffff window]
[    0.514427] pci_bus 0000:00: resource 10 [mem 0xfc000000-0xfeafffff window]
[    0.514428] pci_bus 0000:00: resource 11 [mem 0xfed45000-0xfed811ff window]
[    0.514429] pci_bus 0000:00: resource 12 [mem 0xfed81900-0xfed81fff window]
[    0.514430] pci_bus 0000:00: resource 13 [mem 0xfedc0000-0xfedc0fff window]
[    0.514431] pci_bus 0000:00: resource 14 [mem 0xfedc6000-0xfedc6fff window]
[    0.514431] pci_bus 0000:00: resource 15 [mem 0x850200000-0xfcffffffff window]
[    0.514432] pci_bus 0000:01: resource 0 [io  0x3000-0x3fff]
[    0.514433] pci_bus 0000:01: resource 1 [mem 0xd0000000-0xd10fffff]
[    0.514434] pci_bus 0000:01: resource 2 [mem 0xfb00000000-0xfc01ffffff 64bit pref]
[    0.514436] pci_bus 0000:02: resource 1 [mem 0xd1900000-0xd19fffff]
[    0.514437] pci_bus 0000:03: resource 0 [io  0x2000-0x2fff]
[    0.514437] pci_bus 0000:03: resource 1 [mem 0xd1800000-0xd18fffff]
[    0.514438] pci_bus 0000:04: resource 1 [mem 0xd1700000-0xd17fffff]
[    0.514439] pci_bus 0000:05: resource 1 [mem 0xd1600000-0xd16fffff]
[    0.514440] pci_bus 0000:06: resource 0 [io  0x1000-0x1fff]
[    0.514441] pci_bus 0000:06: resource 1 [mem 0xd1200000-0xd15fffff]
[    0.514441] pci_bus 0000:06: resource 2 [mem 0xfc10000000-0xfc201fffff 64bit pref]
[    0.514442] pci_bus 0000:07: resource 1 [mem 0xd1100000-0xd11fffff]
[    0.514512] pci 0000:01:00.1: extending delay after power-on from D3hot to 20 msec
[    0.514528] pci 0000:01:00.1: D0 power state depends on 0000:01:00.0
[    0.515548] pci 0000:06:00.1: D0 power state depends on 0000:06:00.0
[    0.515572] pci 0000:06:00.3: extending delay after power-on from D3hot to 20 msec
[    0.820042] pci 0000:06:00.3: quirk_usb_early_handoff+0x0/0x810 took 297332 usecs
[    0.820047] pci 0000:06:00.4: extending delay after power-on from D3hot to 20 msec
[    0.834662] pci 0000:06:00.4: quirk_usb_early_handoff+0x0/0x810 took 14271 usecs
[    0.834669] PCI: CLS 64 bytes, default 64
[    0.834676] pci 0000:00:00.2: AMD-Vi: IOMMU performance counters supported
[    0.834702] Trying to unpack rootfs image as initramfs...
[    0.834713] pci 0000:00:01.0: Adding to iommu group 0
[    0.834721] pci 0000:00:01.1: Adding to iommu group 1
[    0.834729] pci 0000:00:01.2: Adding to iommu group 2
[    0.834736] pci 0000:00:01.3: Adding to iommu group 3
[    0.834748] pci 0000:00:02.0: Adding to iommu group 4
[    0.834755] pci 0000:00:02.1: Adding to iommu group 5
[    0.834762] pci 0000:00:02.4: Adding to iommu group 6
[    0.834773] pci 0000:00:08.0: Adding to iommu group 7
[    0.834781] pci 0000:00:08.1: Adding to iommu group 8
[    0.834789] pci 0000:00:08.2: Adding to iommu group 9
[    0.834799] pci 0000:00:14.0: Adding to iommu group 10
[    0.834805] pci 0000:00:14.3: Adding to iommu group 10
[    0.834827] pci 0000:00:18.0: Adding to iommu group 11
[    0.834833] pci 0000:00:18.1: Adding to iommu group 11
[    0.834839] pci 0000:00:18.2: Adding to iommu group 11
[    0.834845] pci 0000:00:18.3: Adding to iommu group 11
[    0.834850] pci 0000:00:18.4: Adding to iommu group 11
[    0.834857] pci 0000:00:18.5: Adding to iommu group 11
[    0.834863] pci 0000:00:18.6: Adding to iommu group 11
[    0.834869] pci 0000:00:18.7: Adding to iommu group 11
[    0.834887] pci 0000:01:00.0: Adding to iommu group 12
[    0.834901] pci 0000:01:00.1: Adding to iommu group 12
[    0.834908] pci 0000:02:00.0: Adding to iommu group 13
[    0.834916] pci 0000:03:00.0: Adding to iommu group 14
[    0.834923] pci 0000:04:00.0: Adding to iommu group 15
[    0.834931] pci 0000:05:00.0: Adding to iommu group 16
[    0.834950] pci 0000:06:00.0: Adding to iommu group 17
[    0.834959] pci 0000:06:00.1: Adding to iommu group 18
[    0.834967] pci 0000:06:00.2: Adding to iommu group 19
[    0.834976] pci 0000:06:00.3: Adding to iommu group 20
[    0.834985] pci 0000:06:00.4: Adding to iommu group 21
[    0.834994] pci 0000:06:00.5: Adding to iommu group 22
[    0.835003] pci 0000:06:00.6: Adding to iommu group 23
[    0.835014] pci 0000:07:00.0: Adding to iommu group 24
[    0.835023] pci 0000:07:00.1: Adding to iommu group 25
[    0.836896] pci 0000:00:00.2: can't derive routing for PCI INT A
[    0.836898] pci 0000:00:00.2: PCI INT A: not connected
[    0.837052] pci 0000:00:00.2: AMD-Vi: Found IOMMU cap 0x40
[    0.837053] AMD-Vi: Extended features (0x206d73ef22254ade, 0x0): PPR X2APIC NX GT IA GA PC GA_vAPIC
[    0.837057] AMD-Vi: Interrupt remapping enabled
[    0.837057] AMD-Vi: X2APIC enabled
[    0.855365] AMD-Vi: Virtual APIC enabled
[    0.855427] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
[    0.855428] software IO TLB: mapped [mem 0x00000000c5057000-0x00000000c9057000] (64MB)
[    0.855487] LVT offset 0 assigned for vector 0x400
[    0.855588] perf: AMD IBS detected (0x000003ff)
[    0.855593] perf/amd_iommu: Detected AMD IOMMU #0 (2 banks, 4 counters/bank).
[    0.856651] Initialise system trusted keyrings
[    0.856658] Key type blacklist registered
[    0.856676] workingset: timestamp_bits=41 max_order=23 bucket_order=0
[    0.856684] zbud: loaded
[    0.856780] integrity: Platform Keyring initialized
[    0.856782] integrity: Machine keyring initialized
[    0.859752] Key type asymmetric registered
[    0.859753] Asymmetric key parser 'x509' registered
[    0.859770] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 242)
[    0.859799] io scheduler mq-deadline registered
[    0.859800] io scheduler kyber registered
[    0.859808] io scheduler bfq registered
[    0.861025] pcieport 0000:00:01.1: PME: Signaling with IRQ 36
[    0.861044] pcieport 0000:00:01.1: pciehp: Slot #0 AttnBtn- PwrCtrl- MRL- AttnInd- PwrInd- HotPlug+ Surprise+ Interlock- NoCompl+ IbPresDis- LLActRep+
[    0.861156] pcieport 0000:00:01.2: PME: Signaling with IRQ 37
[    0.861239] pcieport 0000:00:01.3: PME: Signaling with IRQ 38
[    0.861314] pcieport 0000:00:02.1: PME: Signaling with IRQ 39
[    0.861391] pcieport 0000:00:02.4: PME: Signaling with IRQ 40
[    0.861469] pcieport 0000:00:08.1: PME: Signaling with IRQ 41
[    0.861623] pcieport 0000:00:08.2: PME: Signaling with IRQ 42
[    0.861685] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[    0.863111] ACPI: AC: AC Adapter [ACAD] (on-line)
[    0.863140] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0
[    0.863152] ACPI: button: Power Button [PWRB]
[    0.863170] input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input1
[    0.863178] ACPI: button: Lid Switch [LID]
[    0.863239] Estimated ratio of average max frequency by base frequency (times 1024): 1226
[    0.863252] Monitor-Mwait will be used to enter C-1 state
[    0.863256] ACPI: \_SB_.PLTF.C000: Found 3 idle states
[    0.863323] ACPI: \_SB_.PLTF.C001: Found 3 idle states
[    0.863377] ACPI: \_SB_.PLTF.C002: Found 3 idle states
[    0.863444] ACPI: \_SB_.PLTF.C003: Found 3 idle states
[    0.863569] ACPI: \_SB_.PLTF.C004: Found 3 idle states
[    0.863640] ACPI: \_SB_.PLTF.C005: Found 3 idle states
[    0.863720] ACPI: \_SB_.PLTF.C006: Found 3 idle states
[    0.863803] ACPI: \_SB_.PLTF.C007: Found 3 idle states
[    0.863880] ACPI: \_SB_.PLTF.C008: Found 3 idle states
[    0.863960] ACPI: \_SB_.PLTF.C009: Found 3 idle states
[    0.864028] ACPI: \_SB_.PLTF.C00A: Found 3 idle states
[    0.864093] ACPI: \_SB_.PLTF.C00B: Found 3 idle states
[    0.864159] ACPI: \_SB_.PLTF.C00C: Found 3 idle states
[    0.864227] ACPI: \_SB_.PLTF.C00D: Found 3 idle states
[    0.864293] ACPI: \_SB_.PLTF.C00E: Found 3 idle states
[    0.864358] ACPI: \_SB_.PLTF.C00F: Found 3 idle states
[    0.864514] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled
[    0.865219] Non-volatile memory driver v1.3
[    0.865221] Linux agpgart interface v0.103
[    0.869223] tpm tpm0: tpm_read_log_acpi: Failed to map ACPI memory
[    0.875277] AMD-Vi: AMD IOMMUv2 loaded and initialized
[    0.877259] ahci 0000:07:00.0: version 3.0
[    0.877354] ahci 0000:07:00.0: AHCI 0001.0301 32 slots 1 ports 6 Gbps 0x1 impl SATA mode
[    0.877356] ahci 0000:07:00.0: flags: 64bit ncq sntf ilck pm led clo only pmp fbs pio slum part
[    0.877464] scsi host0: ahci
[    0.877500] ata1: SATA max UDMA/133 abar m2048@0xd1101000 port 0xd1101100 irq 44
[    0.877610] ahci 0000:07:00.1: AHCI 0001.0301 32 slots 1 ports 6 Gbps 0x1 impl SATA mode
[    0.877613] ahci 0000:07:00.1: flags: 64bit ncq sntf ilck pm led clo only pmp fbs pio slum part
[    0.877717] scsi host1: ahci
[    0.877742] ata2: SATA max UDMA/133 abar m2048@0xd1100000 port 0xd1100100 irq 46
[    0.877783] ACPI: bus type drm_connector registered
[    0.878050] usbcore: registered new interface driver usbserial_generic
[    0.878054] usbserial: USB Serial support registered for generic
[    0.878090] rtc_cmos 00:01: RTC can wake from S4
[    0.878267] rtc_cmos 00:01: registered as rtc0
[    0.878290] rtc_cmos 00:01: setting system clock to 2023-06-22T09:02:52 UTC (1687424572)
[    0.878310] rtc_cmos 00:01: alarms up to one month, 114 bytes nvram, hpet irqs
[    0.878335] amd_pstate: driver load is disabled, boot with specific mode to enable this
[    0.878409] ledtrig-cpu: registered to indicate activity on CPUs
[    0.878553] efifb: probing for efifb
[    0.878564] efifb: showing boot graphics
[    0.879218] efifb: framebuffer at 0xfc10000000, using 3072k, total 3072k
[    0.879219] efifb: mode is 1024x768x32, linelength=4096, pages=1
[    0.879220] efifb: scrolling: redraw
[    0.879220] efifb: Truecolor: size=8:8:8:8, shift=24:16:8:0
[    0.879242] fbcon: Deferring console take-over
[    0.879243] fb0: EFI VGA frame buffer device
[    0.879259] hid: raw HID events driver (C) Jiri Kosina
[    0.879318] drop_monitor: Initializing network drop monitor service
[    0.886356] Initializing XFRM netlink socket
[    0.886378] NET: Registered PF_INET6 protocol family
[    0.908508] ACPI: battery: Slot [BAT1] (battery present)
[    0.942119] Freeing initrd memory: 112208K
[    0.945542] Segment Routing with IPv6
[    0.945544] RPL Segment Routing with IPv6
[    0.945550] In-situ OAM (IOAM) with IPv6
[    0.945571] NET: Registered PF_PACKET protocol family
[    0.946269] microcode: CPU0: patch_level=0x0a50000d
[    0.946269] microcode: CPU1: patch_level=0x0a50000d
[    0.946271] microcode: CPU3: patch_level=0x0a50000d
[    0.946271] microcode: CPU2: patch_level=0x0a50000d
[    0.946272] microcode: CPU6: patch_level=0x0a50000d
[    0.946273] microcode: CPU7: patch_level=0x0a50000d
[    0.946273] microcode: CPU5: patch_level=0x0a50000d
[    0.946275] microcode: CPU9: patch_level=0x0a50000d
[    0.946275] microcode: CPU8: patch_level=0x0a50000d
[    0.946276] microcode: CPU11: patch_level=0x0a50000d
[    0.946276] microcode: CPU10: patch_level=0x0a50000d
[    0.946276] microcode: CPU4: patch_level=0x0a50000d
[    0.946277] microcode: CPU13: patch_level=0x0a50000d
[    0.946277] microcode: CPU12: patch_level=0x0a50000d
[    0.946279] microcode: CPU14: patch_level=0x0a50000d
[    0.946279] microcode: CPU15: patch_level=0x0a50000d
[    0.946298] microcode: Microcode Update Driver: v2.2.
[    0.946397] resctrl: L3 allocation detected
[    0.946398] resctrl: MB allocation detected
[    0.946399] resctrl: L3 monitoring detected
[    0.946403] IPI shorthand broadcast: enabled
[    0.947299] sched_clock: Marking stable (946100530, 410051)->(1101944450, -155433869)
[    0.947566] registered taskstats version 1
[    0.947792] Loading compiled-in X.509 certificates
[    0.949322] Loaded X.509 cert 'Build time autogenerated kernel key: 2bed91d4c5c7f1b3dcc240f391d479fa88f869b2'
[    0.951412] zswap: loaded using pool zstd/zsmalloc
[    0.952258] Key type .fscrypt registered
[    0.952259] Key type fscrypt-provisioning registered
[    0.953667] integrity: Loading X.509 certificate: UEFI:db
[    0.953692] integrity: Loaded X.509 cert 'Microsoft Windows Production PCA 2011: a92902398e16c49778cd90f99e4f9ae17c55af53'
[    0.953693] integrity: Loading X.509 certificate: UEFI:db
[    0.953704] integrity: Loaded X.509 cert 'Microsoft Corporation UEFI CA 2011: 13adbf4309bd82709c8cd54f316ed522988a1bd4'
[    0.953704] integrity: Loading X.509 certificate: UEFI:db
[    0.953855] integrity: Loaded X.509 cert 'CompalA31CSMB: 1e3b690555de0b9542b280303282c6d6'
[    0.966055] PM:   Magic number: 11:567:20
[    0.966142] memory memory60: hash matches
[    0.968121] RAS: Correctable Errors collector initialized.
[    0.968220] ACPI Error: No handler for Region [ECRM] (00000000da8f2204) [EmbeddedControl] (20221020/evregion-130)
[    0.968224] ACPI Error: Region EmbeddedControl (ID=3) has no handler (20221020/exfldio-261)
[    0.968227] ACPI Error: Aborting method \_SB.GPIO._EVT due to previous error (AE_NOT_EXIST) (20221020/psparse-529)
[    1.187016] ata2: SATA link down (SStatus 0 SControl 300)
[    1.187528] ata1: SATA link down (SStatus 0 SControl 300)
[    1.188593] Freeing unused decrypted memory: 2036K
[    1.188814] Freeing unused kernel image (initmem) memory: 3512K
[    1.188817] Write protecting the kernel read-only data: 32768k
[    1.189041] Freeing unused kernel image (rodata/data gap) memory: 1828K
[    1.214423] x86/mm: Checked W+X mappings: passed, no W+X pages found.
[    1.214426] rodata_test: all tests were successful
[    1.214430] Run /vtoy/vtoy as init process
[    1.214431]   with arguments:
[    1.214431]     /vtoy/vtoy
[    1.214432]   with environment:
[    1.214432]     HOME=/
[    1.214433]     TERM=linux
[    1.214433]     BOOT_IMAGE=/boot/vmlinuz-x86_64
[    1.214433]     lang=en_US
[    1.214434]     keytable=us
[    1.214434]     tz=UTC
[    1.214434]     misobasedir=garuda
[    1.214435]     driver=nonfree
[    1.348028] fbcon: Taking over console
[    1.348070] Console: switching to colour frame buffer device 128x48
[    1.380444] dracut: /init@105(): '[' -f /usr/lib/initrd-release ']'
[    1.380632] dracut: /init@105(): . /usr/lib/initrd-release
[    1.380811] dracut: //usr/lib/initrd-release@1(): NAME='Garuda Linux'
[    1.380970] dracut: //usr/lib/initrd-release@2(): ID=garuda
[    1.381127] dracut: //usr/lib/initrd-release@3(): ID_LIKE=arch
[    1.381289] dracut: //usr/lib/initrd-release@4(): BUILD_ID=rolling
[    1.381450] dracut: //usr/lib/initrd-release@5(): ANSI_COLOR='38;2;23;147;209'
[    1.381613] dracut: //usr/lib/initrd-release@6(): HOME_URL=https://garudalinux.org/
[    1.381776] dracut: //usr/lib/initrd-release@7(): DOCUMENTATION_URL=https://wiki.garudalinux.org/
[    1.381947] dracut: //usr/lib/initrd-release@8(): SUPPORT_URL=https://forum.garudalinux.org/
[    1.393894] raid6: skipped pq benchmark and selected avx2x4
[    1.393895] raid6: using avx2x2 recovery algorithm
[    1.395594] xor: automatically using best checksumming function   avx
[    1.476577] Btrfs loaded, crc32c=crc32c-intel, zoned=yes, fsverity=yes
[    1.523011] device-mapper: uevent: version 1.0.3
[    1.523059] device-mapper: ioctl: 4.47.0-ioctl (2022-07-28) initialised: dm-devel@redhat.com
[    1.552419] tsc: Refined TSC clocksource calibration: 3194.019 MHz
[    1.552424] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x2e0a37f51cf, max_idle_ns: 440795334641 ns
[    1.552449] clocksource: Switched to clocksource tsc
[    1.587574] wmi_bus wmi_bus-PNP0C14:01: WQBC data block query control method not found
[    1.599396] i8042: PNP: PS/2 Controller [PNP0303:KBC0,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
[    1.611008] serio: i8042 KBD port at 0x60,0x64 irq 1
[    1.611083] serio: i8042 AUX port at 0x60,0x64 irq 12
[    1.749167] input: DELL0A6E:00 06CB:CE81 Mouse as /devices/platform/AMDI0010:03/i2c-0/i2c-DELL0A6E:00/0018:06CB:CE81.0001/input/input2
[    1.749628] input: DELL0A6E:00 06CB:CE81 Touchpad as /devices/platform/AMDI0010:03/i2c-0/i2c-DELL0A6E:00/0018:06CB:CE81.0001/input/input3
[    1.749681] hid-generic 0018:06CB:CE81.0001: input,hidraw0: I2C HID v1.00 Mouse [DELL0A6E:00 06CB:CE81] on i2c-DELL0A6E:00
[    1.761691] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input5
[    1.797126] input: DELL0A6E:00 06CB:CE81 Mouse as /devices/platform/AMDI0010:03/i2c-0/i2c-DELL0A6E:00/0018:06CB:CE81.0001/input/input7
[    1.797155] input: DELL0A6E:00 06CB:CE81 Touchpad as /devices/platform/AMDI0010:03/i2c-0/i2c-DELL0A6E:00/0018:06CB:CE81.0001/input/input8
[    1.797188] hid-multitouch 0018:06CB:CE81.0001: input,hidraw0: I2C HID v1.00 Mouse [DELL0A6E:00 06CB:CE81] on i2c-DELL0A6E:00
[    2.099840] ACPI: video: [Firmware Bug]: ACPI(PEGP) defines _DOD but not _DOS
[    2.099904] ACPI: video: Video Device [PEGP] (multi-head: yes  rom: no  post: no)
[    2.100228] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:00/LNXVIDEO:00/input/input10
[    2.100284] ACPI: video: Video Device [VGA] (multi-head: yes  rom: no  post: no)
[    2.100314] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:10/LNXVIDEO:01/input/input11
[    3.145324] [drm] amdgpu kernel modesetting enabled.
[    3.145336] amdgpu: vga_switcheroo: detected switching method \_SB_.PCI0.GP17.VGA_.ATPX handle
[    3.145566] ATPX version 1, functions 0x00000001
[    3.145592] ATPX Hybrid Graphics
[    3.146950] amdgpu: Virtual CRAT table created for CPU
[    3.146957] amdgpu: Topology: Add CPU node
[    3.147024] amdgpu 0000:06:00.0: enabling device (0006 -> 0007)
[    3.147062] [drm] initializing kernel modesetting (RENOIR 0x1002:0x1638 0x1028:0x0A6E 0xC5).
[    3.149430] [drm] register mmio base: 0xD1500000
[    3.149431] [drm] register mmio size: 524288
[    3.150647] [drm] add ip block number 0 <soc15_common>
[    3.150648] [drm] add ip block number 1 <gmc_v9_0>
[    3.150649] [drm] add ip block number 2 <vega10_ih>
[    3.150650] [drm] add ip block number 3 <psp>
[    3.150650] [drm] add ip block number 4 <smu>
[    3.150651] [drm] add ip block number 5 <dm>
[    3.150651] [drm] add ip block number 6 <gfx_v9_0>
[    3.150652] [drm] add ip block number 7 <sdma_v4_0>
[    3.150653] [drm] add ip block number 8 <vcn_v2_0>
[    3.150653] [drm] add ip block number 9 <jpeg_v2_0>
[    3.150666] amdgpu 0000:06:00.0: amdgpu: Fetched VBIOS from VFCT
[    3.150667] amdgpu: ATOM BIOS: 113-CEZANNE-018
[    3.168976] [drm] VCN decode is enabled in VM mode
[    3.168978] [drm] VCN encode is enabled in VM mode
[    3.181587] [drm] JPEG decode is enabled in VM mode
[    3.181690] Console: switching to colour dummy device 80x25
[    3.181705] amdgpu 0000:06:00.0: vgaarb: deactivate vga console
[    3.181706] amdgpu 0000:06:00.0: amdgpu: Trusted Memory Zone (TMZ) feature enabled
[    3.181711] amdgpu 0000:06:00.0: amdgpu: MODE2 reset
[    3.184522] [drm] vm size is 262144 GB, 4 levels, block size is 9-bit, fragment size is 9-bit
[    3.184526] amdgpu 0000:06:00.0: amdgpu: VRAM: 512M 0x000000F400000000 - 0x000000F41FFFFFFF (512M used)
[    3.184527] amdgpu 0000:06:00.0: amdgpu: GART: 1024M 0x0000000000000000 - 0x000000003FFFFFFF
[    3.184529] amdgpu 0000:06:00.0: amdgpu: AGP: 267419648M 0x000000F800000000 - 0x0000FFFFFFFFFFFF
[    3.184533] [drm] Detected VRAM RAM=512M, BAR=512M
[    3.184533] [drm] RAM width 128bits DDR4
[    3.184637] [drm] amdgpu: 512M of VRAM memory ready
[    3.184638] [drm] amdgpu: 15720M of GTT memory ready.
[    3.184644] [drm] GART: num cpu pages 262144, num gpu pages 262144
[    3.184760] [drm] PCIE GART of 1024M enabled.
[    3.184762] [drm] PTB located at 0x000000F41FC00000
[    3.184971] [drm] Loading DMUB firmware via PSP: version=0x01010024
[    3.185372] [drm] Found VCN firmware Version ENC: 1.19 DEC: 5 VEP: 0 Revision: 0
[    3.185376] amdgpu 0000:06:00.0: amdgpu: Will use PSP to load VCN firmware
[    3.892360] [drm] reserve 0x400000 from 0xf41f800000 for PSP TMR
[    3.975032] amdgpu 0000:06:00.0: amdgpu: RAS: optional ras ta ucode is not available
[    3.985724] amdgpu 0000:06:00.0: amdgpu: RAP: optional rap ta ucode is not available
[    3.985725] amdgpu 0000:06:00.0: amdgpu: SECUREDISPLAY: securedisplay ta ucode is not available
[    3.985991] amdgpu 0000:06:00.0: amdgpu: SMU is initialized successfully!
[    3.986995] [drm] Display Core initialized with v3.2.223!
[    3.986995] [drm] DP-HDMI FRL PCON supported
[    3.987542] [drm] DMUB hardware initialized: version=0x01010024
[    4.301817] [drm] kiq ring mec 2 pipe 1 q 0
[    4.305401] [drm] VCN decode and encode initialized successfully(under DPG Mode).
[    4.305420] [drm] JPEG decode initialized successfully.
[    4.307034] kfd kfd: amdgpu: Allocated 3969056 bytes on gart
[    4.307086] amdgpu: sdma_bitmap: 3
[    4.313523] memmap_init_zone_device initialised 131072 pages in 1ms
[    4.313525] amdgpu: HMM registered 512MB device memory
[    4.313538] amdgpu: SRAT table not found
[    4.313539] amdgpu: Virtual CRAT table created for GPU
[    4.313592] amdgpu: Topology: Add dGPU node [0x1638:0x1002]
[    4.313593] kfd kfd: amdgpu: added device 1002:1638
[    4.313713] amdgpu 0000:06:00.0: amdgpu: SE 1, SH per SE 1, CU per SH 8, active_cu_number 8
[    4.313760] amdgpu 0000:06:00.0: amdgpu: ring gfx uses VM inv eng 0 on hub 0
[    4.313761] amdgpu 0000:06:00.0: amdgpu: ring gfx_low uses VM inv eng 1 on hub 0
[    4.313762] amdgpu 0000:06:00.0: amdgpu: ring gfx_high uses VM inv eng 4 on hub 0
[    4.313763] amdgpu 0000:06:00.0: amdgpu: ring comp_1.0.0 uses VM inv eng 5 on hub 0
[    4.313763] amdgpu 0000:06:00.0: amdgpu: ring comp_1.1.0 uses VM inv eng 6 on hub 0
[    4.313764] amdgpu 0000:06:00.0: amdgpu: ring comp_1.2.0 uses VM inv eng 7 on hub 0
[    4.313764] amdgpu 0000:06:00.0: amdgpu: ring comp_1.3.0 uses VM inv eng 8 on hub 0
[    4.313765] amdgpu 0000:06:00.0: amdgpu: ring comp_1.0.1 uses VM inv eng 9 on hub 0
[    4.313766] amdgpu 0000:06:00.0: amdgpu: ring comp_1.1.1 uses VM inv eng 10 on hub 0
[    4.313766] amdgpu 0000:06:00.0: amdgpu: ring comp_1.2.1 uses VM inv eng 11 on hub 0
[    4.313767] amdgpu 0000:06:00.0: amdgpu: ring comp_1.3.1 uses VM inv eng 12 on hub 0
[    4.313767] amdgpu 0000:06:00.0: amdgpu: ring kiq_2.1.0 uses VM inv eng 13 on hub 0
[    4.313768] amdgpu 0000:06:00.0: amdgpu: ring sdma0 uses VM inv eng 0 on hub 1
[    4.313769] amdgpu 0000:06:00.0: amdgpu: ring vcn_dec uses VM inv eng 1 on hub 1
[    4.313769] amdgpu 0000:06:00.0: amdgpu: ring vcn_enc0 uses VM inv eng 4 on hub 1
[    4.313770] amdgpu 0000:06:00.0: amdgpu: ring vcn_enc1 uses VM inv eng 5 on hub 1
[    4.313771] amdgpu 0000:06:00.0: amdgpu: ring jpeg_dec uses VM inv eng 6 on hub 1
[    4.315510] [drm] Initialized amdgpu 3.52.0 20150101 for 0000:06:00.0 on minor 0
[    4.323884] fbcon: amdgpudrmfb (fb0) is primary device
[    4.324114] [drm] DSC precompute is not needed.
[    4.454118] Console: switching to colour frame buffer device 240x67
[    4.472145] amdgpu 0000:06:00.0: [drm] fb0: amdgpudrmfb frame buffer device
[    4.487471] dracut: Starting plymouth daemon
[    4.658555] sp5100_tco: SP5100/SB800 TCO WatchDog Timer Driver
[    4.658766] sp5100-tco sp5100-tco: Using 0xfeb00000 for watchdog MMIO address
[    4.658825] sp5100-tco sp5100-tco: initialized. heartbeat=60 sec (nowayout=0)
[    4.659950] ccp 0000:06:00.2: enabling device (0000 -> 0002)
[    4.660099] ccp 0000:06:00.2: ccp: unable to access the device: you might be running a broken BIOS.
[    4.663403] xhci_hcd 0000:06:00.3: xHCI Host Controller
[    4.663422] xhci_hcd 0000:06:00.3: new USB bus registered, assigned bus number 1
[    4.663531] xhci_hcd 0000:06:00.3: hcc params 0x0268ffe5 hci version 0x110 quirks 0x0000020000000410
[    4.668392] cryptd: max_cpu_qlen set to 1000
[    4.670243] ccp 0000:06:00.2: tee enabled
[    4.670246] ccp 0000:06:00.2: psp enabled
[    4.671480] xhci_hcd 0000:06:00.3: xHCI Host Controller
[    4.671486] xhci_hcd 0000:06:00.3: new USB bus registered, assigned bus number 2
[    4.671490] xhci_hcd 0000:06:00.3: Host supports USB 3.1 Enhanced SuperSpeed
[    4.671530] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.03
[    4.671533] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    4.671535] usb usb1: Product: xHCI Host Controller
[    4.671536] usb usb1: Manufacturer: Linux 6.3.8-zen1-1-zen xhci-hcd
[    4.671537] usb usb1: SerialNumber: 0000:06:00.3
[    4.675306] hub 1-0:1.0: USB hub found
[    4.675320] hub 1-0:1.0: 4 ports detected
[    4.676587] usb usb2: We don't know the algorithms for LPM for this host, disabling LPM.
[    4.676609] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 6.03
[    4.676611] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    4.676612] usb usb2: Product: xHCI Host Controller
[    4.676613] usb usb2: Manufacturer: Linux 6.3.8-zen1-1-zen xhci-hcd
[    4.676614] usb usb2: SerialNumber: 0000:06:00.3
[    4.677125] hub 2-0:1.0: USB hub found
[    4.677134] hub 2-0:1.0: 2 ports detected
[    4.677387] typec port0: bound usb1-port1 (ops connector_ops)
[    4.677401] typec port0: bound usb2-port1 (ops connector_ops)
[    4.677733] xhci_hcd 0000:06:00.4: xHCI Host Controller
[    4.677744] xhci_hcd 0000:06:00.4: new USB bus registered, assigned bus number 3
[    4.677840] xhci_hcd 0000:06:00.4: hcc params 0x0268ffe5 hci version 0x110 quirks 0x0000020000000410
[    4.678870] xhci_hcd 0000:06:00.4: xHCI Host Controller
[    4.678873] xhci_hcd 0000:06:00.4: new USB bus registered, assigned bus number 4
[    4.678875] xhci_hcd 0000:06:00.4: Host supports USB 3.1 Enhanced SuperSpeed
[    4.678897] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.03
[    4.678899] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    4.678900] usb usb3: Product: xHCI Host Controller
[    4.678900] usb usb3: Manufacturer: Linux 6.3.8-zen1-1-zen xhci-hcd
[    4.678901] usb usb3: SerialNumber: 0000:06:00.4
[    4.678969] hub 3-0:1.0: USB hub found
[    4.678974] hub 3-0:1.0: 4 ports detected
[    4.679388] usb usb4: We don't know the algorithms for LPM for this host, disabling LPM.
[    4.679399] usb usb4: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 6.03
[    4.679400] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    4.679401] usb usb4: Product: xHCI Host Controller
[    4.679401] usb usb4: Manufacturer: Linux 6.3.8-zen1-1-zen xhci-hcd
[    4.679402] usb usb4: SerialNumber: 0000:06:00.4
[    4.679456] hub 4-0:1.0: USB hub found
[    4.679459] hub 4-0:1.0: 2 ports detected
[    4.680291] usb: port power management may be unreliable
[    4.700241] nvme 0000:02:00.0: platform quirk: setting simple suspend
[    4.700282] nvme 0000:05:00.0: platform quirk: setting simple suspend
[    4.700355] nvme nvme1: pci function 0000:05:00.0
[    4.702114] nvme nvme0: pci function 0000:02:00.0
[    4.702720] AVX2 version of gcm_enc/dec engaged.
[    4.702757] AES CTR mode by8 optimization enabled
[    4.705642] nvme nvme1: Shutdown timeout set to 10 seconds
[    4.707239] nvme nvme1: 8/0/0 default/read/poll queues
[    4.708142] nvme nvme1: Ignoring bogus Namespace Identifiers
[    4.709641]  nvme1n1: p1 p2 p3
[    4.713226] r8169 0000:03:00.0 eth0: RTL8125B, 60:18:95:65:07:36, XID 641, IRQ 82
[    4.713230] r8169 0000:03:00.0 eth0: jumbo features [frames: 9194 bytes, tx checksumming: ko]
[    4.714638] BTRFS: device label Garuda-Root devid 1 transid 6725 /dev/nvme1n1p2 scanned by (udev-worker) (471)
[    4.714734] BTRFS: device fsid 33e46d04-5d0a-4744-a50f-54adba815811 devid 1 transid 5473 /dev/nvme1n1p1 scanned by (udev-worker) (556)
[    4.720565] nvme nvme0: 16/0/0 default/read/poll queues
[    4.725285]  nvme0n1: p1 p2 p3 p4 p5
[    4.914658] usb 1-1: new high-speed USB device number 2 using xhci_hcd
[    4.922665] usb 3-1: new full-speed USB device number 2 using xhci_hcd
[    5.065804] usb 1-1: New USB device found, idVendor=05e3, idProduct=0610, bcdDevice=93.03
[    5.065815] usb 1-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[    5.065819] usb 1-1: Product: USB2.1 Hub
[    5.065822] usb 1-1: Manufacturer: GenesysLogic
[    5.073293] usb 3-1: New USB device found, idVendor=046d, idProduct=c52b, bcdDevice=12.11
[    5.073304] usb 3-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[    5.073307] usb 3-1: Product: USB Receiver
[    5.073310] usb 3-1: Manufacturer: Logitech
[    5.115108] input: Logitech USB Receiver as /devices/pci0000:00/0000:00:08.1/0000:06:00.4/usb3/3-1/3-1:1.0/0003:046D:C52B.0002/input/input12
[    5.121617] hub 1-1:1.0: USB hub found
[    5.125712] hub 1-1:1.0: 4 ports detected
[    5.167009] hid-generic 0003:046D:C52B.0002: input,hidraw1: USB HID v1.11 Keyboard [Logitech USB Receiver] on usb-0000:06:00.4-1/input0
[    5.172610] input: Logitech USB Receiver Mouse as /devices/pci0000:00/0000:00:08.1/0000:06:00.4/usb3/3-1/3-1:1.1/0003:046D:C52B.0003/input/input13
[    5.172803] input: Logitech USB Receiver Consumer Control as /devices/pci0000:00/0000:00:08.1/0000:06:00.4/usb3/3-1/3-1:1.1/0003:046D:C52B.0003/input/input14
[    5.183855] usb 2-1: new SuperSpeed USB device number 2 using xhci_hcd
[    5.202014] usb 2-1: New USB device found, idVendor=05e3, idProduct=0620, bcdDevice=93.03
[    5.202025] usb 2-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[    5.202028] usb 2-1: Product: USB3.1 Hub
[    5.202032] usb 2-1: Manufacturer: GenesysLogic
[    5.221469] usb 3-2: new high-speed USB device number 3 using xhci_hcd
[    5.224691] input: Logitech USB Receiver System Control as /devices/pci0000:00/0000:00:08.1/0000:06:00.4/usb3/3-1/3-1:1.1/0003:046D:C52B.0003/input/input15
[    5.224942] hid-generic 0003:046D:C52B.0003: input,hiddev96,hidraw2: USB HID v1.11 Mouse [Logitech USB Receiver] on usb-0000:06:00.4-1/input1
[    5.229681] hid-generic 0003:046D:C52B.0004: hiddev97,hidraw3: USB HID v1.11 Device [Logitech USB Receiver] on usb-0000:06:00.4-1/input2
[    5.229771] usbcore: registered new interface driver usbhid
[    5.229775] usbhid: USB HID core driver
[    5.231766] hub 2-1:1.0: USB hub found
[    5.232063] hub 2-1:1.0: 4 ports detected
[    5.329880] usb 1-2: new high-speed USB device number 3 using xhci_hcd
[    5.350950] usb 3-2: New USB device found, idVendor=0781, idProduct=5575, bcdDevice= 1.26
[    5.350955] usb 3-2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[    5.350958] usb 3-2: Product: Cruzer Glide
[    5.350960] usb 3-2: Manufacturer: SanDisk
[    5.350961] usb 3-2: SerialNumber: 20044318321644C27BB3
[    5.353638] logitech-djreceiver 0003:046D:C52B.0004: hiddev96,hidraw1: USB HID v1.11 Device [Logitech USB Receiver] on usb-0000:06:00.4-1/input2
[    5.354942] usb-storage 3-2:1.0: USB Mass Storage device detected
[    5.355026] scsi host2: usb-storage 3-2:1.0
[    5.355060] usbcore: registered new interface driver usb-storage
[    5.356920] usbcore: registered new interface driver uas
[    5.461100] input: Logitech Wireless Device PID:404b Keyboard as /devices/pci0000:00/0000:00:08.1/0000:06:00.4/usb3/3-1/3-1:1.2/0003:046D:C52B.0004/0003:046D:404B.0005/input/input17
[    5.461194] input: Logitech Wireless Device PID:404b Mouse as /devices/pci0000:00/0000:00:08.1/0000:06:00.4/usb3/3-1/3-1:1.2/0003:046D:C52B.0004/0003:046D:404B.0005/input/input18
[    5.461224] hid-generic 0003:046D:404B.0005: input,hidraw2: USB HID v1.11 Keyboard [Logitech Wireless Device PID:404b] on usb-0000:06:00.4-1/input2:1
[    5.461258] usb 1-2: New USB device found, idVendor=2109, idProduct=2811, bcdDevice=90.90
[    5.461261] usb 1-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[    5.461262] usb 1-2: Product: USB2.0 Hub
[    5.461263] usb 1-2: Manufacturer: VIA Labs, Inc.
[    5.463002] input: Logitech Wireless Device PID:4096 Mouse as /devices/pci0000:00/0000:00:08.1/0000:06:00.4/usb3/3-1/3-1:1.2/0003:046D:C52B.0004/0003:046D:4096.0006/input/input22
[    5.463034] hid-generic 0003:046D:4096.0006: input,hidraw3: USB HID v1.11 Mouse [Logitech Wireless Device PID:4096] on usb-0000:06:00.4-1/input2:2
[    5.477025] input: Logitech K350 as /devices/pci0000:00/0000:00:08.1/0000:06:00.4/usb3/3-1/3-1:1.2/0003:046D:C52B.0004/0003:046D:200A.0007/input/input26
[    5.504074] hub 1-2:1.0: USB hub found
[    5.504684] hub 1-2:1.0: 4 ports detected
[    5.532548] logitech-hidpp-device 0003:046D:200A.0007: input,hidraw4: USB HID v1.11 Keyboard [Logitech K350] on usb-0000:06:00.4-1/input2:3
[    5.541086] input: Logitech K350 as /devices/pci0000:00/0000:00:08.1/0000:06:00.4/usb3/3-1/3-1:1.2/0003:046D:C52B.0004/0003:046D:200A.0008/input/input27
[    5.549558] logitech-hidpp-device 0003:046D:200A.0008: input,hidraw2: USB HID v1.11 Keyboard [Logitech K350] on usb-0000:06:00.4-1/input2:4
[    5.557030] input: Logitech K400 as /devices/pci0000:00/0000:00:08.1/0000:06:00.4/usb3/3-1/3-1:1.2/0003:046D:C52B.0004/0003:046D:404B.0005/input/input28
[    5.557131] logitech-hidpp-device 0003:046D:404B.0005: input,hidraw5: USB HID v1.11 Keyboard [Logitech K400] on usb-0000:06:00.4-1/input2:1
[    5.571534] usb 2-2: new SuperSpeed USB device number 3 using xhci_hcd
[    5.576994] input: Logitech ERGO M575 as /devices/pci0000:00/0000:00:08.1/0000:06:00.4/usb3/3-1/3-1:1.2/0003:046D:C52B.0004/0003:046D:4096.0006/input/input29
[    5.577046] logitech-hidpp-device 0003:046D:4096.0006: input,hidraw3: USB HID v1.11 Mouse [Logitech ERGO M575] on usb-0000:06:00.4-1/input2:2
[    5.821770] usb 2-2: New USB device found, idVendor=2109, idProduct=8110, bcdDevice=90.95
[    5.821777] usb 2-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[    5.821778] usb 2-2: Product: USB3.0 Hub
[    5.821780] usb 2-2: Manufacturer: VIA Labs, Inc.
[    5.840734] hub 2-2:1.0: USB hub found
[    5.840929] hub 2-2:1.0: 4 ports detected
[    5.909765] usb 1-1.1: new high-speed USB device number 4 using xhci_hcd
[    6.041740] usb 1-1.1: New USB device found, idVendor=05e3, idProduct=0610, bcdDevice=93.03
[    6.041751] usb 1-1.1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[    6.041754] usb 1-1.1: Product: USB2.1 Hub
[    6.041757] usb 1-1.1: Manufacturer: GenesysLogic
[    6.081469] hub 1-1.1:1.0: USB hub found
[    6.085826] hub 1-1.1:1.0: 4 ports detected
[    6.086777] dracut: /init@201(): '[' 1 -gt 240 ']'
[    6.086862] dracut: /init@211(): main_loop=2
[    6.086919] dracut: /init@212(): '[' 2 -gt 360 ']'
[    6.086968] dracut: /init@168(): :
[    6.087018] dracut: /init@170(): check_finished
[    6.087082] dracut: /lib/dracut-lib.sh@431(check_finished): local f
[    6.087124] dracut: /lib/dracut-lib.sh@432(check_finished): for f in "$hookdir"/initqueue/finished/*.sh
[    6.087177] dracut: /lib/dracut-lib.sh@433(check_finished): '[' '/lib/dracut/hooks/initqueue/finished/devexists-\x2fdev\x2fdisk\x2fby-label\x2fGARUDA_HYPRLAND_RAPTOR.sh' = '/lib/dracut/hooks/initqueue/finished/*.sh' ']'
[    6.087225] dracut: /lib/dracut-lib.sh@435(check_finished): '[' -e '/lib/dracut/hooks/initqueue/finished/devexists-\x2fdev\x2fdisk\x2fby-label\x2fGARUDA_HYPRLAND_RAPTOR.sh' ']'
[    6.087268] dracut: /lib/dracut-lib.sh@435(check_finished): . '/lib/dracut/hooks/initqueue/finished/devexists-\x2fdev\x2fdisk\x2fby-label\x2fGARUDA_HYPRLAND_RAPTOR.sh'
[    6.111646] usb 2-1.1: new SuperSpeed USB device number 4 using xhci_hcd
[    6.130124] usb 2-1.1: New USB device found, idVendor=05e3, idProduct=0620, bcdDevice=93.03
[    6.130133] usb 2-1.1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[    6.130137] usb 2-1.1: Product: USB3.1 Hub
[    6.130139] usb 2-1.1: Manufacturer: GenesysLogic
[    6.176610] hub 2-1.1:1.0: USB hub found
[    6.176957] hub 2-1.1:1.0: 4 ports detected
[    6.257684] usb 1-3: new full-speed USB device number 5 using xhci_hcd
[    6.415805] usb 1-3: New USB device found, idVendor=8087, idProduct=0029, bcdDevice= 0.01
[    6.415819] usb 1-3: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[    6.416964] scsi 2:0:0:0: Direct-Access     SanDisk  Cruzer Glide     1.26 PQ: 0 ANSI: 5
[    6.417379] sd 2:0:0:0: [sda] 62530624 512-byte logical blocks: (32.0 GB/29.8 GiB)
[    6.418084] sd 2:0:0:0: [sda] Write Protect is off
[    6.418086] sd 2:0:0:0: [sda] Mode Sense: 43 00 00 00
[    6.418456] sd 2:0:0:0: [sda] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA
[    6.421280] sd 2:0:0:0: [sda] Attached SCSI removable disk
[    6.475440] usb 1-2.4: new high-speed USB device number 6 using xhci_hcd
[    6.568143] usb 1-2.4: New USB device found, idVendor=1a40, idProduct=0101, bcdDevice= 1.11
[    6.568149] usb 1-2.4: New USB device strings: Mfr=0, Product=1, SerialNumber=0
[    6.568151] usb 1-2.4: Product: USB 2.0 Hub
[    6.624015] hub 1-2.4:1.0: USB hub found
[    6.624311] hub 1-2.4:1.0: 4 ports detected
[    6.632715] usb 2-2.1: new SuperSpeed USB device number 5 using xhci_hcd
[    6.645885] usb 2-2.1: New USB device found, idVendor=17e9, idProduct=4323, bcdDevice=31.00
[    6.645894] usb 2-2.1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[    6.645898] usb 2-2.1: Product: Plugable UD-3900
[    6.645900] usb 2-2.1: Manufacturer: DisplayLink
[    6.645902] usb 2-2.1: SerialNumber: 10133829
[    6.696891] usbcore: registered new interface driver cdc_ether
[    6.714439] usb 2-1.1.2: new SuperSpeed USB device number 6 using xhci_hcd
[    6.720464] cdc_ncm 2-2.1:1.5: MAC-Address: 8c:ae:4c:df:54:e5
[    6.720467] cdc_ncm 2-2.1:1.5: setting rx_max = 16384
[    6.720576] cdc_ncm 2-2.1:1.5: setting tx_max = 16384
[    6.720730] cdc_ncm 2-2.1:1.5 eth1: register 'cdc_ncm' at usb-0000:06:00.3-2.1, CDC NCM (SEND ZLP), 8c:ae:4c:df:54:e5
[    6.720770] usbcore: registered new interface driver cdc_ncm
[    6.723260] usbcore: registered new interface driver cdc_wdm
[    6.724896] usbcore: registered new interface driver cdc_mbim
[    6.872453] usb 1-1.1.1: new full-speed USB device number 7 using xhci_hcd
[    6.985593] usb 1-1.1.1: not running at top speed; connect to a high speed hub
[    6.986434] usb 2-1.1.2: New USB device found, idVendor=0b95, idProduct=1790, bcdDevice= 2.00
[    6.986442] usb 2-1.1.2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[    6.986446] usb 2-1.1.2: Product: AX88179A
[    6.986448] usb 2-1.1.2: Manufacturer: ASIX
[    6.986450] usb 2-1.1.2: SerialNumber: 0000051B594098
[    7.003600] usb 1-1.1.1: New USB device found, idVendor=25a4, idProduct=9311, bcdDevice= 2.01
[    7.003607] usb 1-1.1.1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[    7.003611] usb 1-1.1.1: Product: USB C Video Adaptor
[    7.003613] usb 1-1.1.1: Manufacturer: USB C
[    7.003615] usb 1-1.1.1: SerialNumber: 000000000001
[    7.096453] usb 1-4: new high-speed USB device number 8 using xhci_hcd
[    7.220512] cdc_ncm 2-1.1.2:2.0: MAC-Address: 00:05:1b:59:40:98
[    7.220519] cdc_ncm 2-1.1.2:2.0: setting rx_max = 16384
[    7.232055] cdc_ncm 2-1.1.2:2.0: setting tx_max = 16384
[    7.242015] usb 1-4: New USB device found, idVendor=0c45, idProduct=6720, bcdDevice=82.68
[    7.242018] usb 1-4: New USB device strings: Mfr=2, Product=1, SerialNumber=0
[    7.242019] usb 1-4: Product: Integrated_Webcam_HD
[    7.242019] usb 1-4: Manufacturer: CN0V976R8LG0019JA68HA01
[    7.251822] cdc_ncm 2-1.1.2:2.0 eth2: register 'cdc_ncm' at usb-0000:06:00.3-1.1.2, CDC NCM (NO ZLP), 00:05:1b:59:40:98
[    7.295692] usb 2-2.2: new SuperSpeed USB device number 7 using xhci_hcd
[    7.314992] usb 2-2.2: New USB device found, idVendor=13fe, idProduct=6700, bcdDevice= 1.10
[    7.314999] usb 2-2.2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[    7.315002] usb 2-2.2: Product: USB DISK 3.0
[    7.315004] usb 2-2.2: Manufacturer:
[    7.315005] usb 2-2.2: SerialNumber: 071C3240F38A8440
[    7.315495] usb-storage 2-2.2:1.0: USB Mass Storage device detected
[    7.315698] scsi host3: usb-storage 2-2.2:1.0
[    7.488461] usb 1-2.4.4: new high-speed USB device number 9 using xhci_hcd
[    7.679122] usb 1-2.4.4: New USB device found, idVendor=093b, idProduct=0026, bcdDevice= 1.60
[    7.679124] usb 1-2.4.4: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[    7.679125] usb 1-2.4.4: Product: DVDR PX-Q840U USB Device
[    7.679126] usb 1-2.4.4: Manufacturer: Plextor
[    7.679126] usb 1-2.4.4: SerialNumber: 00101016402043310
[    7.679520] usb-storage 1-2.4.4:1.0: USB Mass Storage device detected
[    7.679968] scsi host4: usb-storage 1-2.4.4:1.0
[    7.741001] usb 2-1.1.3: new SuperSpeed USB device number 8 using xhci_hcd
[    7.757634] usb 2-1.1.3: New USB device found, idVendor=05e3, idProduct=0749, bcdDevice=15.39
[    7.757641] usb 2-1.1.3: New USB device strings: Mfr=3, Product=4, SerialNumber=2
[    7.757645] usb 2-1.1.3: Product: USB3.0 Card Reader
[    7.757647] usb 2-1.1.3: Manufacturer: Generic
[    7.757648] usb 2-1.1.3: SerialNumber: 000000001539
[    7.758442] usb-storage 2-1.1.3:1.0: USB Mass Storage device detected
[    7.758797] scsi host5: usb-storage 2-1.1.3:1.0
[    7.821472] usb 2-2.3: new SuperSpeed USB device number 9 using xhci_hcd
[    7.834263] usb 2-2.3: New USB device found, idVendor=1058, idProduct=261f, bcdDevice=10.34
[    7.834267] usb 2-2.3: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[    7.834270] usb 2-2.3: Product: Gaming Drive
[    7.834271] usb 2-2.3: Manufacturer: Western Digital
[    7.834273] usb 2-2.3: SerialNumber: 575838324438314C3239564E
[    7.834800] usb-storage 2-2.3:1.0: USB Mass Storage device detected
[    7.835016] scsi host6: usb-storage 2-2.3:1.0
[    8.338729] scsi 3:0:0:0: Direct-Access              USB DISK 3.0     PMAP PQ: 0 ANSI: 6
[    8.339052] sd 3:0:0:0: [sdb] 484362240 512-byte logical blocks: (248 GB/231 GiB)
[    8.339743] sd 3:0:0:0: [sdb] Write Protect is off
[    8.339746] sd 3:0:0:0: [sdb] Mode Sense: 45 00 00 00
[    8.340428] sd 3:0:0:0: [sdb] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA
[    8.349854]  sdb: sdb1 sdb2
[    8.349941] sd 3:0:0:0: [sdb] Attached SCSI removable disk
[    8.722093] scsi 4:0:0:0: CD-ROM            PLEXTOR  DVDR   PX-Q840U  1.05 PQ: 0 ANSI: 0
[    8.731040] sr 4:0:0:0: [sr0] scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2 cdda tray
[    8.731043] cdrom: Uniform CD-ROM driver Revision: 3.20
[    8.732442] sr 4:0:0:0: Attached scsi CD-ROM sr0
[    8.786683] scsi 5:0:0:0: Direct-Access     Generic  MassStorageClass 1539 PQ: 0 ANSI: 6
[    8.788177] scsi 5:0:0:1: Direct-Access     Generic  MassStorageClass 1539 PQ: 0 ANSI: 6
[    8.789885] sd 5:0:0:0: [sdc] Media removed, stopped polling
[    8.790057] sd 5:0:0:0: [sdc] Attached SCSI removable disk
[    8.848844] scsi 6:0:0:0: Direct-Access     WD       Gaming Drive     1034 PQ: 0 ANSI: 6
[    8.849218] sd 6:0:0:0: [sde] Very big device. Trying to use READ CAPACITY(16).
[    8.849334] sd 6:0:0:0: [sde] 7813969920 512-byte logical blocks: (4.00 TB/3.64 TiB)
[    8.849335] sd 6:0:0:0: [sde] 4096-byte physical blocks
[    8.849649] sd 6:0:0:0: [sde] Write Protect is off
[    8.849650] sd 6:0:0:0: [sde] Mode Sense: 47 00 10 08
[    8.849942] sd 6:0:0:0: [sde] No Caching mode page found
[    8.849943] sd 6:0:0:0: [sde] Assuming drive cache: write through
[    8.993512] sd 5:0:0:1: [sdd] Media removed, stopped polling
[    8.994022] sd 5:0:0:1: [sdd] Attached SCSI removable disk
[    9.423558]  sde: sde1
[    9.423724] sd 6:0:0:0: [sde] Attached SCSI disk
[    9.425107] ISO 9660 Extensions: Microsoft Joliet Level 3
[    9.425891] ISO 9660 Extensions: RRIP_1991A
[    9.431527] loop: module loaded
[    9.431798] loop0: detected capacity change from 0 to 59424
[    9.448643] ISOFS: Unable to identify CD-ROM format.
[    9.448904] dracut: FATAL: Failed to mount '/dev/loop0'
[    9.448922] dracut: Refusing to continue
[    9.450677] dracut Warning: Signal caught!
[    9.453557] dracut Warning: dracut: FATAL: Failed to mount '/dev/loop0'
[    9.453594] dracut Warning: dracut: Refusing to continue
+ '[' -f /run/initramfs/init.log ']'
+ echo /run/initramfs/init.log
/run/initramfs/init.log
+ sed -e 's/\(ftp:\/\/.*\):.*@/\1:*******@/g;s/\(cifs:\/\/.*\):.*@/\1:*******@/g;s/cifspass=[^ ]*/cifspass=*******/g;s/iscsi:.*@/iscsi:******@/g;s/rd.iscsi.password=[^ ]*/rd.iscsi.password=******/g;s/rd.iscsi.in.password=[^ ]*/rd.iscsi.in.password=******/g' /run/initramfs/init.log
/init@105(): '[' -f /usr/lib/initrd-release ']'
/init@105(): . /usr/lib/initrd-release
//usr/lib/initrd-release@1(): NAME='Garuda Linux'
//usr/lib/initrd-release@2(): ID=garuda
//usr/lib/initrd-release@3(): ID_LIKE=arch
//usr/lib/initrd-release@4(): BUILD_ID=rolling
//usr/lib/initrd-release@5(): ANSI_COLOR='38;2;23;147;209'
//usr/lib/initrd-release@6(): HOME_URL=https://garudalinux.org/
//usr/lib/initrd-release@7(): DOCUMENTATION_URL=https://wiki.garudalinux.org/
//usr/lib/initrd-release@8(): SUPPORT_URL=https://forum.garudalinux.org/
//usr/lib/initrd-release@9(): BUG_REPORT_URL=https://gitlab.com/groups/garuda-linux/
//usr/lib/initrd-release@10(): PRIVACY_POLICY_URL=https://terms.archlinux.org/docs/privacy-policy/
//usr/lib/initrd-release@11(): LOGO=garudalinux
//usr/lib/initrd-release@12(): VERSION=dracut-056
//usr/lib/initrd-release@13(): PRETTY_NAME='Garuda Linux dracut-056 (Initramfs)'
//usr/lib/initrd-release@14(): DRACUT_VERSION=056
/init@106(): '[' -n '' ']'
/init@108(): source_conf /etc/conf.d
/lib/dracut-lib.sh@441(source_conf): local f
/lib/dracut-lib.sh@442(source_conf): '[' /etc/conf.d ']'
/lib/dracut-lib.sh@442(source_conf): '[' -d //etc/conf.d ']'
/lib/dracut-lib.sh@444(source_conf): for f in "/$1"/*.conf
/lib/dracut-lib.sh@444(source_conf): '[' -e //etc/conf.d/systemd.conf ']'
/lib/dracut-lib.sh@444(source_conf): . //etc/conf.d/systemd.conf
///etc/conf.d/systemd.conf@1(source): systemdutildir=/usr/lib/systemd
///etc/conf.d/systemd.conf@2(source): systemdsystemunitdir=/usr/lib/systemd/system
///etc/conf.d/systemd.conf@3(source): systemdsystemconfdir=/etc/systemd/system
/init@110(): getarg rd.cmdline=ask
/lib/dracut-lib.sh@173(getarg): debug_off
/lib/dracut-lib.sh@23(debug_off): set +x
/lib/dracut-lib.sh@236(getarg): return 1
/init@118(): getargbool 1 rd.hostonly
/lib/dracut-lib.sh@247(getargbool): local _b
/lib/dracut-lib.sh@248(getargbool): unset _b
/lib/dracut-lib.sh@249(getargbool): local _default
/lib/dracut-lib.sh@250(getargbool): _default=1
/lib/dracut-lib.sh@251(getargbool): shift
//lib/dracut-lib.sh@252(getargbool): getarg rd.hostonly
//lib/dracut-lib.sh@173(getarg): debug_off
//lib/dracut-lib.sh@23(debug_off): set +x
//lib/dracut-lib.sh@236(getarg): return 1
/lib/dracut-lib.sh@252(getargbool): _b=
/lib/dracut-lib.sh@252(getargbool): _b=1
/lib/dracut-lib.sh@253(getargbool): '[' -n 1 ']'
/lib/dracut-lib.sh@254(getargbool): '[' 1 = 0 ']'
/lib/dracut-lib.sh@255(getargbool): '[' 1 = no ']'
/lib/dracut-lib.sh@256(getargbool): '[' 1 = off ']'
/lib/dracut-lib.sh@258(getargbool): return 0
/init@125(): make_trace_mem 'hook cmdline' 1+:mem 1+:iomem 3+:slab
/lib/dracut-lib.sh@1078(make_trace_mem): local log_level prefix msg msg_printed
/lib/dracut-lib.sh@1079(make_trace_mem): local trace trace_level trace_in_higher_levels insert_trace
/lib/dracut-lib.sh@1081(make_trace_mem): msg='hook cmdline'
/lib/dracut-lib.sh@1082(make_trace_mem): shift
/lib/dracut-lib.sh@1084(make_trace_mem): prefix='[debug_mem]'
/lib/dracut-lib.sh@1085(make_trace_mem): log_level=0
/lib/dracut-lib.sh@1087(make_trace_mem): '[' -z 0 ']'
/lib/dracut-lib.sh@1087(make_trace_mem): '[' 0 -le 0 ']'
/lib/dracut-lib.sh@1088(make_trace_mem): return
/init@126(): getarg rd.break=cmdline -d rdbreak=cmdline
/lib/dracut-lib.sh@173(getarg): debug_off
/lib/dracut-lib.sh@23(debug_off): set +x
/lib/dracut-lib.sh@236(getarg): return 1
/init@127(): source_hook cmdline
/lib/dracut-lib.sh@424(source_hook): local _dir
/lib/dracut-lib.sh@425(source_hook): _dir=cmdline
/lib/dracut-lib.sh@426(source_hook): shift
/lib/dracut-lib.sh@427(source_hook): source_all /lib/dracut/hooks/cmdline
/lib/dracut-lib.sh@406(source_all): local f
/lib/dracut-lib.sh@407(source_all): local _dir
/lib/dracut-lib.sh@408(source_all): _dir=/lib/dracut/hooks/cmdline
/lib/dracut-lib.sh@409(source_all): shift
/lib/dracut-lib.sh@410(source_all): '[' /lib/dracut/hooks/cmdline ']'
/lib/dracut-lib.sh@410(source_all): '[' -d //lib/dracut/hooks/cmdline ']'
/lib/dracut-lib.sh@411(source_all): for f in "/$_dir"/*.sh
/lib/dracut-lib.sh@412(source_all): '[' -e //lib/dracut/hooks/cmdline/01-parse-kernel.sh ']'
/lib/dracut-lib.sh@415(source_all): . //lib/dracut/hooks/cmdline/01-parse-kernel.sh
///lib/dracut/hooks/cmdline/01-parse-kernel.sh@3(source): _modprobe_d=/etc/modprobe.d
///lib/dracut/hooks/cmdline/01-parse-kernel.sh@4(source): '[' -d /usr/lib/modprobe.d ']'
///lib/dracut/hooks/cmdline/01-parse-kernel.sh@5(source): _modprobe_d=/usr/lib/modprobe.d
////lib/dracut/hooks/cmdline/01-parse-kernel.sh@12(source): getargs rd.driver.pre -d rdloaddriver=
///lib/dracut-lib.sh@293(getargs): debug_off
///lib/dracut-lib.sh@23(debug_off): set +x
///lib/dracut-lib.sh@323(getargs): return 0
///lib/dracut/hooks/cmdline/01-parse-kernel.sh@12(source): for i in $(getargs rd.driver.pre -d rdloaddriver=)
///lib/dracut/hooks/cmdline/01-parse-kernel.sh@14(source): IFS=,
///lib/dracut/hooks/cmdline/01-parse-kernel.sh@15(source): for p in $i
///lib/dracut/hooks/cmdline/01-parse-kernel.sh@16(source): modprobe btrfs
///lib/dracut/hooks/cmdline/01-parse-kernel.sh@16(source): vinfo
//lib/dracut-lib.sh@101(vinfo): read -r line
//lib/dracut-lib.sh@101(vinfo): '[' -n '' ']'
///lib/dracut/hooks/cmdline/01-parse-kernel.sh@21(source): '[' -d /etc/modprobe.d ']'
///lib/dracut/hooks/cmdline/01-parse-kernel.sh@21(source): mkdir -p /etc/modprobe.d
////lib/dracut/hooks/cmdline/01-parse-kernel.sh@23(source): getargs rd.driver.blacklist -d rdblacklist=
///lib/dracut-lib.sh@293(getargs): debug_off
///lib/dracut-lib.sh@23(debug_off): set +x
///lib/dracut-lib.sh@326(getargs): return 1
////lib/dracut/hooks/cmdline/01-parse-kernel.sh@32(source): getargs rd.driver.post -d rdinsmodpost=
///lib/dracut-lib.sh@293(getargs): debug_off
///lib/dracut-lib.sh@23(debug_off): set +x
///lib/dracut-lib.sh@326(getargs): return 1
///lib/dracut/hooks/cmdline/01-parse-kernel.sh@37(source): '[' -n '' ']'
///lib/dracut/hooks/cmdline/01-parse-kernel.sh@38(source): unset _do_insmodpost _modprobe_d
/lib/dracut-lib.sh@411(source_all): for f in "/$_dir"/*.sh
/lib/dracut-lib.sh@412(source_all): '[' -e //lib/dracut/hooks/cmdline/10-parse-resume.sh ']'
/lib/dracut-lib.sh@415(source_all): . //lib/dracut/hooks/cmdline/10-parse-resume.sh
////lib/dracut/hooks/cmdline/10-parse-resume.sh@3(source): getarg resume=
///lib/dracut-lib.sh@173(getarg): debug_off
///lib/dracut-lib.sh@23(debug_off): set +x
///lib/dracut-lib.sh@236(getarg): return 1
///lib/dracut/hooks/cmdline/10-parse-resume.sh@3(source): resume=
///lib/dracut/hooks/cmdline/10-parse-resume.sh@7(source): unset resume
////lib/dracut/hooks/cmdline/10-parse-resume.sh@10(source): label_uuid_to_dev ''
///lib/dracut-lib.sh@587(label_uuid_to_dev): local _dev
///lib/dracut-lib.sh@588(label_uuid_to_dev): _dev=
///lib/dracut-lib.sh@589(label_uuid_to_dev): case "$_dev" in
///lib/dracut-lib.sh@603(label_uuid_to_dev): echo ''
///lib/dracut/hooks/cmdline/10-parse-resume.sh@10(source): resume=
////lib/dracut/hooks/cmdline/10-parse-resume.sh@12(source): getarg splash=
///lib/dracut-lib.sh@173(getarg): debug_off
///lib/dracut-lib.sh@23(debug_off): set +x
///lib/dracut-lib.sh@236(getarg): return 1
///lib/dracut/hooks/cmdline/10-parse-resume.sh@12(source): splash=
///lib/dracut/hooks/cmdline/10-parse-resume.sh@15(source): unset splash
///lib/dracut/hooks/cmdline/10-parse-resume.sh@18(source): case "$splash" in
///lib/dracut/hooks/cmdline/10-parse-resume.sh@23(source): a_splash='-P splash=n'
///lib/dracut/hooks/cmdline/10-parse-resume.sh@27(source): getarg noresume
//lib/dracut-lib.sh@173(getarg): debug_off
//lib/dracut-lib.sh@23(debug_off): set +x
//lib/dracut-lib.sh@236(getarg): return 1
///lib/dracut/hooks/cmdline/10-parse-resume.sh@28(source): '[' -n '' ']'
///lib/dracut/hooks/cmdline/10-parse-resume.sh@72(source): '[' -x /usr/sbin/resume ']'
///lib/dracut/hooks/cmdline/10-parse-resume.sh@77(source): printf -- %s 'SUBSYSTEM=="block", ACTION=="add|change", ENV{ID_FS_TYPE}=="suspend|swsuspend|swsupend",'
///lib/dracut/hooks/cmdline/10-parse-resume.sh@78(source): printf -- '%s\n' ' RUN+="/sbin/initqueue --finished --unique --name 00resume echo %M:%m > /sys/power/resume"'
/lib/dracut-lib.sh@411(source_all): for f in "/$_dir"/*.sh
/lib/dracut-lib.sh@412(source_all): '[' -e //lib/dracut/hooks/cmdline/10-parse-root-opts.sh ']'
/lib/dracut-lib.sh@415(source_all): . //lib/dracut/hooks/cmdline/10-parse-root-opts.sh
////lib/dracut/hooks/cmdline/10-parse-root-opts.sh@4(source): getarg root=
///lib/dracut-lib.sh@173(getarg): debug_off
///lib/dracut-lib.sh@23(debug_off): set +x
///lib/dracut-lib.sh@228(getarg): return 0
///lib/dracut/hooks/cmdline/10-parse-root-opts.sh@4(source): root=miso:LABEL=GARUDA_HYPRLAND_RAPTOR
////lib/dracut/hooks/cmdline/10-parse-root-opts.sh@6(source): getarg rootflags=
///lib/dracut-lib.sh@173(getarg): debug_off
///lib/dracut-lib.sh@23(debug_off): set +x
///lib/dracut-lib.sh@236(getarg): return 1
///lib/dracut/hooks/cmdline/10-parse-root-opts.sh@6(source): rflags=
///lib/dracut/hooks/cmdline/10-parse-root-opts.sh@7(source): getargbool 0 ro
//lib/dracut-lib.sh@247(getargbool): local _b
//lib/dracut-lib.sh@248(getargbool): unset _b
//lib/dracut-lib.sh@249(getargbool): local _default
//lib/dracut-lib.sh@250(getargbool): _default=0
//lib/dracut-lib.sh@251(getargbool): shift
///lib/dracut-lib.sh@252(getargbool): getarg ro
///lib/dracut-lib.sh@173(getarg): debug_off
///lib/dracut-lib.sh@23(debug_off): set +x
///lib/dracut-lib.sh@236(getarg): return 1
//lib/dracut-lib.sh@252(getargbool): _b=
//lib/dracut-lib.sh@252(getargbool): _b=0
//lib/dracut-lib.sh@253(getargbool): '[' -n 0 ']'
//lib/dracut-lib.sh@254(getargbool): '[' 0 = 0 ']'
//lib/dracut-lib.sh@254(getargbool): return 1
///lib/dracut/hooks/cmdline/10-parse-root-opts.sh@8(source): getargbool 0 rw
//lib/dracut-lib.sh@247(getargbool): local _b
//lib/dracut-lib.sh@248(getargbool): unset _b
//lib/dracut-lib.sh@249(getargbool): local _default
//lib/dracut-lib.sh@250(getargbool): _default=0
//lib/dracut-lib.sh@251(getargbool): shift
///lib/dracut-lib.sh@252(getargbool): getarg rw
///lib/dracut-lib.sh@173(getarg): debug_off
///lib/dracut-lib.sh@23(debug_off): set +x
///lib/dracut-lib.sh@236(getarg): return 1
//lib/dracut-lib.sh@252(getargbool): _b=
//lib/dracut-lib.sh@252(getargbool): _b=0
//lib/dracut-lib.sh@253(getargbool): '[' -n 0 ']'
//lib/dracut-lib.sh@254(getargbool): '[' 0 = 0 ']'
//lib/dracut-lib.sh@254(getargbool): return 1
///lib/dracut/hooks/cmdline/10-parse-root-opts.sh@9(source): rflags=
////lib/dracut/hooks/cmdline/10-parse-root-opts.sh@11(source): getarg rootfstype=
///lib/dracut-lib.sh@173(getarg): debug_off
///lib/dracut-lib.sh@23(debug_off): set +x
///lib/dracut-lib.sh@236(getarg): return 1
///lib/dracut/hooks/cmdline/10-parse-root-opts.sh@11(source): fstype=
///lib/dracut/hooks/cmdline/10-parse-root-opts.sh@12(source): '[' -z '' ']'
///lib/dracut/hooks/cmdline/10-parse-root-opts.sh@13(source): fstype=auto
/lib/dracut-lib.sh@411(source_all): for f in "/$_dir"/*.sh
/lib/dracut-lib.sh@412(source_all): '[' -e //lib/dracut/hooks/cmdline/15-parse-miso.sh ']'
/lib/dracut-lib.sh@415(source_all): . //lib/dracut/hooks/cmdline/15-parse-miso.sh
///lib/dracut/hooks/cmdline/15-parse-miso.sh@3(source): case "${root#miso:}" in
////lib/dracut/hooks/cmdline/15-parse-miso.sh@5(source): label_uuid_to_dev block:LABEL=GARUDA_HYPRLAND_RAPTOR
///lib/dracut-lib.sh@587(label_uuid_to_dev): local _dev
///lib/dracut-lib.sh@588(label_uuid_to_dev): _dev=LABEL=GARUDA_HYPRLAND_RAPTOR
///lib/dracut-lib.sh@589(label_uuid_to_dev): case "$_dev" in
////lib/dracut-lib.sh@591(label_uuid_to_dev): echo GARUDA_HYPRLAND_RAPTOR
////lib/dracut-lib.sh@591(label_uuid_to_dev): sed 's,/,\\x2f,g;s, ,\\x20,g'
///lib/dracut-lib.sh@591(label_uuid_to_dev): echo /dev/disk/by-label/GARUDA_HYPRLAND_RAPTOR
///lib/dracut/hooks/cmdline/15-parse-miso.sh@5(source): root=miso:/dev/disk/by-label/GARUDA_HYPRLAND_RAPTOR
///lib/dracut/hooks/cmdline/15-parse-miso.sh@6(source): rootok=1
///lib/dracut/hooks/cmdline/15-parse-miso.sh@14(source): '[' miso = miso ']'
///lib/dracut/hooks/cmdline/15-parse-miso.sh@14(source): wait_for_dev /dev/disk/by-label/GARUDA_HYPRLAND_RAPTOR
//lib/dracut-dev-lib.sh@104(wait_for_dev): local _name
//lib/dracut-dev-lib.sh@105(wait_for_dev): local _noreload
//lib/dracut-dev-lib.sh@107(wait_for_dev): '[' /dev/disk/by-label/GARUDA_HYPRLAND_RAPTOR = -n ']'
///lib/dracut-dev-lib.sh@112(wait_for_dev): str_replace /dev/disk/by-label/GARUDA_HYPRLAND_RAPTOR / '\x2f'
///lib/dracut-lib.sh@113(str_replace): local in=/dev/disk/by-label/GARUDA_HYPRLAND_RAPTOR
///lib/dracut-lib.sh@114(str_replace): local s=/
///lib/dracut-lib.sh@115(str_replace): local 'r=\x2f'
///lib/dracut-lib.sh@116(str_replace): local out=
///lib/dracut-lib.sh@118(str_replace): strstr /dev/disk/by-label/GARUDA_HYPRLAND_RAPTOR /
///lib/dracut-lib.sh@32(strstr): '[' '' '!=' /dev/disk/by-label/GARUDA_HYPRLAND_RAPTOR ']'
///lib/dracut-lib.sh@119(str_replace): chop=
///lib/dracut-lib.sh@120(str_replace): out='\x2f'
///lib/dracut-lib.sh@121(str_replace): in=dev/disk/by-label/GARUDA_HYPRLAND_RAPTOR
///lib/dracut-lib.sh@118(str_replace): strstr dev/disk/by-label/GARUDA_HYPRLAND_RAPTOR /
///lib/dracut-lib.sh@32(strstr): '[' '' '!=' dev/disk/by-label/GARUDA_HYPRLAND_RAPTOR ']'
///lib/dracut-lib.sh@119(str_replace): chop=dev
///lib/dracut-lib.sh@120(str_replace): out='\x2fdev\x2f'
///lib/dracut-lib.sh@121(str_replace): in=disk/by-label/GARUDA_HYPRLAND_RAPTOR
///lib/dracut-lib.sh@118(str_replace): strstr disk/by-label/GARUDA_HYPRLAND_RAPTOR /
///lib/dracut-lib.sh@32(strstr): '[' '' '!=' disk/by-label/GARUDA_HYPRLAND_RAPTOR ']'
///lib/dracut-lib.sh@119(str_replace): chop=disk
///lib/dracut-lib.sh@120(str_replace): out='\x2fdev\x2fdisk\x2f'
///lib/dracut-lib.sh@121(str_replace): in=by-label/GARUDA_HYPRLAND_RAPTOR
///lib/dracut-lib.sh@118(str_replace): strstr by-label/GARUDA_HYPRLAND_RAPTOR /
///lib/dracut-lib.sh@32(strstr): '[' '' '!=' by-label/GARUDA_HYPRLAND_RAPTOR ']'
///lib/dracut-lib.sh@119(str_replace): chop=by-label
///lib/dracut-lib.sh@120(str_replace): out='\x2fdev\x2fdisk\x2fby-label\x2f'
///lib/dracut-lib.sh@121(str_replace): in=GARUDA_HYPRLAND_RAPTOR
///lib/dracut-lib.sh@118(str_replace): strstr GARUDA_HYPRLAND_RAPTOR /
///lib/dracut-lib.sh@32(strstr): '[' GARUDA_HYPRLAND_RAPTOR '!=' GARUDA_HYPRLAND_RAPTOR ']'
///lib/dracut-lib.sh@123(str_replace): echo '\x2fdev\x2fdisk\x2fby-label\x2fGARUDA_HYPRLAND_RAPTOR'
//lib/dracut-dev-lib.sh@112(wait_for_dev): _name='\x2fdev\x2fdisk\x2fby-label\x2fGARUDA_HYPRLAND_RAPTOR'
//lib/dracut-dev-lib.sh@114(wait_for_dev): type mark_hostonly
//lib/dracut-dev-lib.sh@116(wait_for_dev): '[' -e '/lib/dracut/hooks/initqueue/finished/devexists-\x2fdev\x2fdisk\x2fby-label\x2fGARUDA_HYPRLAND_RAPTOR.sh' ']'
//lib/dracut-dev-lib.sh@118(wait_for_dev): printf '[ -e "%s" ]\n' /dev/disk/by-label/GARUDA_HYPRLAND_RAPTOR
//lib/dracut-dev-lib.sh@121(wait_for_dev): printf '[ -e "%s" ] || ' /dev/disk/by-label/GARUDA_HYPRLAND_RAPTOR
//lib/dracut-dev-lib.sh@122(wait_for_dev): printf 'warn "\"%s\" does not exist"\n' /dev/disk/by-label/GARUDA_HYPRLAND_RAPTOR
//lib/dracut-dev-lib.sh@125(wait_for_dev): set_systemd_timeout_for_dev /dev/disk/by-label/GARUDA_HYPRLAND_RAPTOR
//lib/dracut-dev-lib.sh@54(set_systemd_timeout_for_dev): local _name
//lib/dracut-dev-lib.sh@55(set_systemd_timeout_for_dev): local _needreload
//lib/dracut-dev-lib.sh@56(set_systemd_timeout_for_dev): local _noreload
//lib/dracut-dev-lib.sh@57(set_systemd_timeout_for_dev): local _timeout
//lib/dracut-dev-lib.sh@59(set_systemd_timeout_for_dev): '[' -z '' ']'
//lib/dracut-dev-lib.sh@59(set_systemd_timeout_for_dev): return 0
/lib/dracut-lib.sh@411(source_all): for f in "/$_dir"/*.sh
/lib/dracut-lib.sh@412(source_all): '[' -e //lib/dracut/hooks/cmdline/20-parse-i18n.sh ']'
/lib/dracut-lib.sh@415(source_all): . //lib/dracut/hooks/cmdline/20-parse-i18n.sh
///lib/dracut/hooks/cmdline/20-parse-i18n.sh@22(source): inst_key_val /etc/vconsole.conf KEYMAP '' rd.vconsole.keymap KEYMAP -d KEYTABLE
///lib/dracut/hooks/cmdline/20-parse-i18n.sh@4(inst_key_val): local _value
///lib/dracut/hooks/cmdline/20-parse-i18n.sh@5(inst_key_val): local _file
///lib/dracut/hooks/cmdline/20-parse-i18n.sh@6(inst_key_val): local _default
///lib/dracut/hooks/cmdline/20-parse-i18n.sh@7(inst_key_val): _file=/etc/vconsole.conf
///lib/dracut/hooks/cmdline/20-parse-i18n.sh@8(inst_key_val): shift
///lib/dracut/hooks/cmdline/20-parse-i18n.sh@9(inst_key_val): _key=KEYMAP
///lib/dracut/hooks/cmdline/20-parse-i18n.sh@10(inst_key_val): shift
///lib/dracut/hooks/cmdline/20-parse-i18n.sh@11(inst_key_val): _default=
///lib/dracut/hooks/cmdline/20-parse-i18n.sh@12(inst_key_val): shift
////lib/dracut/hooks/cmdline/20-parse-i18n.sh@13(inst_key_val): getarg rd.vconsole.keymap KEYMAP -d KEYTABLE
///lib/dracut-lib.sh@173(getarg): debug_off
///lib/dracut-lib.sh@23(debug_off): set +x
///lib/dracut-lib.sh@236(getarg): return 1
///lib/dracut/hooks/cmdline/20-parse-i18n.sh@13(inst_key_val): _value=
///lib/dracut/hooks/cmdline/20-parse-i18n.sh@14(inst_key_val): '[' -z '' ']'
///lib/dracut/hooks/cmdline/20-parse-i18n.sh@14(inst_key_val): _value=
///lib/dracut/hooks/cmdline/20-parse-i18n.sh@15(inst_key_val): '[' -n '' ']'
///lib/dracut/hooks/cmdline/20-parse-i18n.sh@18(inst_key_val): unset _file
///lib/dracut/hooks/cmdline/20-parse-i18n.sh@19(inst_key_val): unset _value
///lib/dracut/hooks/cmdline/20-parse-i18n.sh@23(source): inst_key_val /etc/vconsole.conf FONT '' rd.vconsole.font FONT -d SYSFONT
///lib/dracut/hooks/cmdline/20-parse-i18n.sh@4(inst_key_val): local _value
///lib/dracut/hooks/cmdline/20-parse-i18n.sh@5(inst_key_val): local _file
///lib/dracut/hooks/cmdline/20-parse-i18n.sh@6(inst_key_val): local _default
///lib/dracut/hooks/cmdline/20-parse-i18n.sh@7(inst_key_val): _file=/etc/vconsole.conf
///lib/dracut/hooks/cmdline/20-parse-i18n.sh@8(inst_key_val): shift
///lib/dracut/hooks/cmdline/20-parse-i18n.sh@9(inst_key_val): _key=FONT
///lib/dracut/hooks/cmdline/20-parse-i18n.sh@10(inst_key_val): shift
///lib/dracut/hooks/cmdline/20-parse-i18n.sh@11(inst_key_val): _default=
///lib/dracut/hooks/cmdline/20-parse-i18n.sh@12(inst_key_val): shift
////lib/dracut/hooks/cmdline/20-parse-i18n.sh@13(inst_key_val): getarg rd.vconsole.font FONT -d SYSFONT
///lib/dracut-lib.sh@173(getarg): debug_off
///lib/dracut-lib.sh@23(debug_off): set +x
///lib/dracut-lib.sh@236(getarg): return 1
///lib/dracut/hooks/cmdline/20-parse-i18n.sh@13(inst_key_val): _value=
///lib/dracut/hooks/cmdline/20-parse-i18n.sh@14(inst_key_val): '[' -z '' ']'
///lib/dracut/hooks/cmdline/20-parse-i18n.sh@14(inst_key_val): _value=
///lib/dracut/hooks/cmdline/20-parse-i18n.sh@15(inst_key_val): '[' -n '' ']'
///lib/dracut/hooks/cmdline/20-parse-i18n.sh@18(inst_key_val): unset _file
///lib/dracut/hooks/cmdline/20-parse-i18n.sh@19(inst_key_val): unset _value
///lib/dracut/hooks/cmdline/20-parse-i18n.sh@24(source): inst_key_val /etc/vconsole.conf FONT_MAP '' rd.vconsole.font.map FONT_MAP -d CONTRANS
///lib/dracut/hooks/cmdline/20-parse-i18n.sh@4(inst_key_val): local _value
///lib/dracut/hooks/cmdline/20-parse-i18n.sh@5(inst_key_val): local _file
///lib/dracut/hooks/cmdline/20-parse-i18n.sh@6(inst_key_val): local _default
///lib/dracut/hooks/cmdline/20-parse-i18n.sh@7(inst_key_val): _file=/etc/vconsole.conf
///lib/dracut/hooks/cmdline/20-parse-i18n.sh@8(inst_key_val): shift
///lib/dracut/hooks/cmdline/20-parse-i18n.sh@9(inst_key_val): _key=FONT_MAP
///lib/dracut/hooks/cmdline/20-parse-i18n.sh@10(inst_key_val): shift
///lib/dracut/hooks/cmdline/20-parse-i18n.sh@11(inst_key_val): _default=
///lib/dracut/hooks/cmdline/20-parse-i18n.sh@12(inst_key_val): shift
////lib/dracut/hooks/cmdline/20-parse-i18n.sh@13(inst_key_val): getarg rd.vconsole.font.map FONT_MAP -d CONTRANS
///lib/dracut-lib.sh@173(getarg): debug_off
///lib/dracut-lib.sh@23(debug_off): set +x
///lib/dracut-lib.sh@236(getarg): return 1
///lib/dracut/hooks/cmdline/20-parse-i18n.sh@13(inst_key_val): _value=
///lib/dracut/hooks/cmdline/20-parse-i18n.sh@14(inst_key_val): '[' -z '' ']'
///lib/dracut/hooks/cmdline/20-parse-i18n.sh@14(inst_key_val): _value=
///lib/dracut/hooks/cmdline/20-parse-i18n.sh@15(inst_key_val): '[' -n '' ']'
///lib/dracut/hooks/cmdline/20-parse-i18n.sh@18(inst_key_val): unset _file
///lib/dracut/hooks/cmdline/20-parse-i18n.sh@19(inst_key_val): unset _value
///lib/dracut/hooks/cmdline/20-parse-i18n.sh@25(source): inst_key_val /etc/vconsole.conf FONT_UNIMAP '' rd.vconsole.font.unimap FONT_UNIMAP -d UNIMAP
///lib/dracut/hooks/cmdline/20-parse-i18n.sh@4(inst_key_val): local _value
///lib/dracut/hooks/cmdline/20-parse-i18n.sh@5(inst_key_val): local _file
///lib/dracut/hooks/cmdline/20-parse-i18n.sh@6(inst_key_val): local _default
///lib/dracut/hooks/cmdline/20-parse-i18n.sh@7(inst_key_val): _file=/etc/vconsole.conf
///lib/dracut/hooks/cmdline/20-parse-i18n.sh@8(inst_key_val): shift
///lib/dracut/hooks/cmdline/20-parse-i18n.sh@9(inst_key_val): _key=FONT_UNIMAP
///lib/dracut/hooks/cmdline/20-parse-i18n.sh@10(inst_key_val): shift
///lib/dracut/hooks/cmdline/20-parse-i18n.sh@11(inst_key_val): _default=
///lib/dracut/hooks/cmdline/20-parse-i18n.sh@12(inst_key_val): shift
////lib/dracut/hooks/cmdline/20-parse-i18n.sh@13(inst_key_val): getarg rd.vconsole.font.unimap FONT_UNIMAP -d UNIMAP
///lib/dracut-lib.sh@173(getarg): debug_off
///lib/dracut-lib.sh@23(debug_off): set +x
///lib/dracut-lib.sh@236(getarg): return 1
///lib/dracut/hooks/cmdline/20-parse-i18n.sh@13(inst_key_val): _value=
///lib/dracut/hooks/cmdline/20-parse-i18n.sh@14(inst_key_val): '[' -z '' ']'
///lib/dracut/hooks/cmdline/20-parse-i18n.sh@14(inst_key_val): _value=
///lib/dracut/hooks/cmdline/20-parse-i18n.sh@15(inst_key_val): '[' -n '' ']'
///lib/dracut/hooks/cmdline/20-parse-i18n.sh@18(inst_key_val): unset _file
///lib/dracut/hooks/cmdline/20-parse-i18n.sh@19(inst_key_val): unset _value
///lib/dracut/hooks/cmdline/20-parse-i18n.sh@26(source): inst_key_val /etc/vconsole.conf UNICODE 1 rd.vconsole.font.unicode UNICODE vconsole.unicode
///lib/dracut/hooks/cmdline/20-parse-i18n.sh@4(inst_key_val): local _value
///lib/dracut/hooks/cmdline/20-parse-i18n.sh@5(inst_key_val): local _file
///lib/dracut/hooks/cmdline/20-parse-i18n.sh@6(inst_key_val): local _default
///lib/dracut/hooks/cmdline/20-parse-i18n.sh@7(inst_key_val): _file=/etc/vconsole.conf
///lib/dracut/hooks/cmdline/20-parse-i18n.sh@8(inst_key_val): shift
///lib/dracut/hooks/cmdline/20-parse-i18n.sh@9(inst_key_val): _key=UNICODE
///lib/dracut/hooks/cmdline/20-parse-i18n.sh@10(inst_key_val): shift
///lib/dracut/hooks/cmdline/20-parse-i18n.sh@11(inst_key_val): _default=1
///lib/dracut/hooks/cmdline/20-parse-i18n.sh@12(inst_key_val): shift
////lib/dracut/hooks/cmdline/20-parse-i18n.sh@13(inst_key_val): getarg rd.vconsole.font.unicode UNICODE vconsole.unicode
///lib/dracut-lib.sh@173(getarg): debug_off
///lib/dracut-lib.sh@23(debug_off): set +x
///lib/dracut-lib.sh@236(getarg): return 1
///lib/dracut/hooks/cmdline/20-parse-i18n.sh@13(inst_key_val): _value=
///lib/dracut/hooks/cmdline/20-parse-i18n.sh@14(inst_key_val): '[' -z '' ']'
///lib/dracut/hooks/cmdline/20-parse-i18n.sh@14(inst_key_val): _value=1
///lib/dracut/hooks/cmdline/20-parse-i18n.sh@15(inst_key_val): '[' -n 1 ']'
///lib/dracut/hooks/cmdline/20-parse-i18n.sh@16(inst_key_val): printf -- '%s="%s"\n' UNICODE 1
///lib/dracut/hooks/cmdline/20-parse-i18n.sh@18(inst_key_val): unset _file
///lib/dracut/hooks/cmdline/20-parse-i18n.sh@19(inst_key_val): unset _value
///lib/dracut/hooks/cmdline/20-parse-i18n.sh@27(source): inst_key_val /etc/vconsole.conf EXT_KEYMAP '' rd.vconsole.keymap.ext EXT_KEYMAP
///lib/dracut/hooks/cmdline/20-parse-i18n.sh@4(inst_key_val): local _value
///lib/dracut/hooks/cmdline/20-parse-i18n.sh@5(inst_key_val): local _file
///lib/dracut/hooks/cmdline/20-parse-i18n.sh@6(inst_key_val): local _default
///lib/dracut/hooks/cmdline/20-parse-i18n.sh@7(inst_key_val): _file=/etc/vconsole.conf
///lib/dracut/hooks/cmdline/20-parse-i18n.sh@8(inst_key_val): shift
///lib/dracut/hooks/cmdline/20-parse-i18n.sh@9(inst_key_val): _key=EXT_KEYMAP
///lib/dracut/hooks/cmdline/20-parse-i18n.sh@10(inst_key_val): shift
///lib/dracut/hooks/cmdline/20-parse-i18n.sh@11(inst_key_val): _default=
///lib/dracut/hooks/cmdline/20-parse-i18n.sh@12(inst_key_val): shift
////lib/dracut/hooks/cmdline/20-parse-i18n.sh@13(inst_key_val): getarg rd.vconsole.keymap.ext EXT_KEYMAP
///lib/dracut-lib.sh@173(getarg): debug_off
///lib/dracut-lib.sh@23(debug_off): set +x
///lib/dracut-lib.sh@236(getarg): return 1
///lib/dracut/hooks/cmdline/20-parse-i18n.sh@13(inst_key_val): _value=
///lib/dracut/hooks/cmdline/20-parse-i18n.sh@14(inst_key_val): '[' -z '' ']'
///lib/dracut/hooks/cmdline/20-parse-i18n.sh@14(inst_key_val): _value=
///lib/dracut/hooks/cmdline/20-parse-i18n.sh@15(inst_key_val): '[' -n '' ']'
///lib/dracut/hooks/cmdline/20-parse-i18n.sh@18(inst_key_val): unset _file
///lib/dracut/hooks/cmdline/20-parse-i18n.sh@19(inst_key_val): unset _value
///lib/dracut/hooks/cmdline/20-parse-i18n.sh@29(source): inst_key_val /etc/locale.conf LANG '' rd.locale.LANG LANG
///lib/dracut/hooks/cmdline/20-parse-i18n.sh@4(inst_key_val): local _value
///lib/dracut/hooks/cmdline/20-parse-i18n.sh@5(inst_key_val): local _file
///lib/dracut/hooks/cmdline/20-parse-i18n.sh@6(inst_key_val): local _default
///lib/dracut/hooks/cmdline/20-parse-i18n.sh@7(inst_key_val): _file=/etc/locale.conf
///lib/dracut/hooks/cmdline/20-parse-i18n.sh@8(inst_key_val): shift
///lib/dracut/hooks/cmdline/20-parse-i18n.sh@9(inst_key_val): _key=LANG
///lib/dracut/hooks/cmdline/20-parse-i18n.sh@10(inst_key_val): shift
///lib/dracut/hooks/cmdline/20-parse-i18n.sh@11(inst_key_val): _default=
///lib/dracut/hooks/cmdline/20-parse-i18n.sh@12(inst_key_val): shift
////lib/dracut/hooks/cmdline/20-parse-i18n.sh@13(inst_key_val): getarg rd.locale.LANG LANG
///lib/dracut-lib.sh@173(getarg): debug_off
///lib/dracut-lib.sh@23(debug_off): set +x
///lib/dracut-lib.sh@236(getarg): return 1
///lib/dracut/hooks/cmdline/20-parse-i18n.sh@13(inst_key_val): _value=
///lib/dracut/hooks/cmdline/20-parse-i18n.sh@14(inst_key_val): '[' -z '' ']'
///lib/dracut/hooks/cmdline/20-parse-i18n.sh@14(inst_key_val): _value=
///lib/dracut/hooks/cmdline/20-parse-i18n.sh@15(inst_key_val): '[' -n '' ']'
///lib/dracut/hooks/cmdline/20-parse-i18n.sh@18(inst_key_val): unset _file
///lib/dracut/hooks/cmdline/20-parse-i18n.sh@19(inst_key_val): unset _value
///lib/dracut/hooks/cmdline/20-parse-i18n.sh@30(source): inst_key_val /etc/locale.conf LC_ALL '' rd.locale.LC_ALL LC_ALL
///lib/dracut/hooks/cmdline/20-parse-i18n.sh@4(inst_key_val): local _value
///lib/dracut/hooks/cmdline/20-parse-i18n.sh@5(inst_key_val): local _file
///lib/dracut/hooks/cmdline/20-parse-i18n.sh@6(inst_key_val): local _default
///lib/dracut/hooks/cmdline/20-parse-i18n.sh@7(inst_key_val): _file=/etc/locale.conf
///lib/dracut/hooks/cmdline/20-parse-i18n.sh@8(inst_key_val): shift
///lib/dracut/hooks/cmdline/20-parse-i18n.sh@9(inst_key_val): _key=LC_ALL
///lib/dracut/hooks/cmdline/20-parse-i18n.sh@10(inst_key_val): shift
///lib/dracut/hooks/cmdline/20-parse-i18n.sh@11(inst_key_val): _default=
///lib/dracut/hooks/cmdline/20-parse-i18n.sh@12(inst_key_val): shift
////lib/dracut/hooks/cmdline/20-parse-i18n.sh@13(inst_key_val): getarg rd.locale.LC_ALL LC_ALL
///lib/dracut-lib.sh@173(getarg): debug_off
///lib/dracut-lib.sh@23(debug_off): set +x
///lib/dracut-lib.sh@236(getarg): return 1
///lib/dracut/hooks/cmdline/20-parse-i18n.sh@13(inst_key_val): _value=
///lib/dracut/hooks/cmdline/20-parse-i18n.sh@14(inst_key_val): '[' -z '' ']'
///lib/dracut/hooks/cmdline/20-parse-i18n.sh@14(inst_key_val): _value=
///lib/dracut/hooks/cmdline/20-parse-i18n.sh@15(inst_key_val): '[' -n '' ']'
///lib/dracut/hooks/cmdline/20-parse-i18n.sh@18(inst_key_val): unset _file
///lib/dracut/hooks/cmdline/20-parse-i18n.sh@19(inst_key_val): unset _value
///lib/dracut/hooks/cmdline/20-parse-i18n.sh@32(source): '[' -f /etc/locale.conf ']'
/lib/dracut-lib.sh@411(source_all): for f in "/$_dir"/*.sh
/lib/dracut-lib.sh@412(source_all): '[' -e //lib/dracut/hooks/cmdline/30-parse-lunmask.sh ']'
/lib/dracut-lib.sh@415(source_all): . //lib/dracut/hooks/cmdline/30-parse-lunmask.sh
////lib/dracut/hooks/cmdline/30-parse-lunmask.sh@26(source): getargs rd.lunmask
///lib/dracut-lib.sh@293(getargs): debug_off
///lib/dracut-lib.sh@23(debug_off): set +x
///lib/dracut-lib.sh@326(getargs): return 1
/init@129(): '[' -z miso:/dev/disk/by-label/GARUDA_HYPRLAND_RAPTOR ']'
/init@130(): '[' -z 1 ']'
/init@132(): export root rflags fstype netroot NEWROOT
/init@135(): make_trace_mem 'hook pre-udev' 1:shortmem 2+:mem 3+:slab
/lib/dracut-lib.sh@1078(make_trace_mem): local log_level prefix msg msg_printed
/lib/dracut-lib.sh@1079(make_trace_mem): local trace trace_level trace_in_higher_levels insert_trace
/lib/dracut-lib.sh@1081(make_trace_mem): msg='hook pre-udev'
/lib/dracut-lib.sh@1082(make_trace_mem): shift
/lib/dracut-lib.sh@1084(make_trace_mem): prefix='[debug_mem]'
/lib/dracut-lib.sh@1085(make_trace_mem): log_level=0
/lib/dracut-lib.sh@1087(make_trace_mem): '[' -z 0 ']'
/lib/dracut-lib.sh@1087(make_trace_mem): '[' 0 -le 0 ']'
/lib/dracut-lib.sh@1088(make_trace_mem): return
/init@136(): getarg rd.break=pre-udev -d rdbreak=pre-udev
/lib/dracut-lib.sh@173(getarg): debug_off
/lib/dracut-lib.sh@23(debug_off): set +x
/lib/dracut-lib.sh@236(getarg): return 1
/init@137(): source_hook pre-udev
/lib/dracut-lib.sh@424(source_hook): local _dir
/lib/dracut-lib.sh@425(source_hook): _dir=pre-udev
/lib/dracut-lib.sh@426(source_hook): shift
/lib/dracut-lib.sh@427(source_hook): source_all /lib/dracut/hooks/pre-udev
/lib/dracut-lib.sh@406(source_all): local f
/lib/dracut-lib.sh@407(source_all): local _dir
/lib/dracut-lib.sh@408(source_all): _dir=/lib/dracut/hooks/pre-udev
/lib/dracut-lib.sh@409(source_all): shift
/lib/dracut-lib.sh@410(source_all): '[' /lib/dracut/hooks/pre-udev ']'
/lib/dracut-lib.sh@410(source_all): '[' -d //lib/dracut/hooks/pre-udev ']'
/lib/dracut-lib.sh@411(source_all): for f in "/$_dir"/*.sh
/lib/dracut-lib.sh@412(source_all): '[' -e //lib/dracut/hooks/pre-udev/30-dm-pre-udev.sh ']'
/lib/dracut-lib.sh@415(source_all): . //lib/dracut/hooks/pre-udev/30-dm-pre-udev.sh
////lib/dracut/hooks/pre-udev/30-dm-pre-udev.sh@3(source): cat /proc/misc
///lib/dracut/hooks/pre-udev/30-dm-pre-udev.sh@3(source): strstr '234 btrfs-control
124 cpu_dma_latency
125 udmabuf
144 nvram
228 hpet
235 autofs
126 userfaultfd
231 snapshot
183 hw_random
127 vga_arbiter' device-mapper
//lib/dracut-lib.sh@32(strstr): '[' '234 btrfs-control
124 cpu_dma_latency
125 udmabuf
144 nvram
228 hpet
235 autofs
126 userfaultfd
231 snapshot
183 hw_random
127 vga_arbiter' '!=' '234 btrfs-control
124 cpu_dma_latency
125 udmabuf
144 nvram
228 hpet
235 autofs
126 userfaultfd
231 snapshot
183 hw_random
127 vga_arbiter' ']'
///lib/dracut/hooks/pre-udev/30-dm-pre-udev.sh@3(source): modprobe dm_mod
///lib/dracut/hooks/pre-udev/30-dm-pre-udev.sh@4(source): modprobe dm_mirror
/init@139(): UDEV_LOG=err
/init@140(): getargbool 0 rd.udev.info -d -y rdudevinfo
/lib/dracut-lib.sh@247(getargbool): local _b
/lib/dracut-lib.sh@248(getargbool): unset _b
/lib/dracut-lib.sh@249(getargbool): local _default
/lib/dracut-lib.sh@250(getargbool): _default=0
/lib/dracut-lib.sh@251(getargbool): shift
//lib/dracut-lib.sh@252(getargbool): getarg rd.udev.info -d -y rdudevinfo
//lib/dracut-lib.sh@173(getarg): debug_off
//lib/dracut-lib.sh@23(debug_off): set +x
//lib/dracut-lib.sh@236(getarg): return 1
/lib/dracut-lib.sh@252(getargbool): _b=
/lib/dracut-lib.sh@252(getargbool): _b=0
/lib/dracut-lib.sh@253(getargbool): '[' -n 0 ']'
/lib/dracut-lib.sh@254(getargbool): '[' 0 = 0 ']'
/lib/dracut-lib.sh@254(getargbool): return 1
/init@141(): getargbool 0 rd.udev.debug -d -y rdudevdebug
/lib/dracut-lib.sh@247(getargbool): local _b
/lib/dracut-lib.sh@248(getargbool): unset _b
/lib/dracut-lib.sh@249(getargbool): local _default
/lib/dracut-lib.sh@250(getargbool): _default=0
/lib/dracut-lib.sh@251(getargbool): shift
//lib/dracut-lib.sh@252(getargbool): getarg rd.udev.debug -d -y rdudevdebug
//lib/dracut-lib.sh@173(getarg): debug_off
//lib/dracut-lib.sh@23(debug_off): set +x
//lib/dracut-lib.sh@236(getarg): return 1
/lib/dracut-lib.sh@252(getargbool): _b=
/lib/dracut-lib.sh@252(getargbool): _b=0
/lib/dracut-lib.sh@253(getargbool): '[' -n 0 ']'
/lib/dracut-lib.sh@254(getargbool): '[' 0 = 0 ']'
/lib/dracut-lib.sh@254(getargbool): return 1
/init@144(): UDEV_LOG=err
/init@144(): /usr/lib/systemd/systemd-udevd --daemon --resolve-names=never
Starting systemd-udevd version 253.5-2-arch
/init@146(): UDEV_QUEUE_EMPTY='udevadm settle --timeout=0'
/init@148(): udevproperty hookdir=/lib/dracut/hooks
/lib/dracut-lib.sh@527(udevproperty): for i in "$@"
/lib/dracut-lib.sh@528(udevproperty): udevadm control --property=hookdir=/lib/dracut/hooks
/init@150(): make_trace_mem 'hook pre-trigger' 1:shortmem 2+:mem 3+:slab
/lib/dracut-lib.sh@1078(make_trace_mem): local log_level prefix msg msg_printed
/lib/dracut-lib.sh@1079(make_trace_mem): local trace trace_level trace_in_higher_levels insert_trace
/lib/dracut-lib.sh@1081(make_trace_mem): msg='hook pre-trigger'
/lib/dracut-lib.sh@1082(make_trace_mem): shift
/lib/dracut-lib.sh@1084(make_trace_mem): prefix='[debug_mem]'
/lib/dracut-lib.sh@1085(make_trace_mem): log_level=0
/lib/dracut-lib.sh@1087(make_trace_mem): '[' -z 0 ']'
/lib/dracut-lib.sh@1087(make_trace_mem): '[' 0 -le 0 ']'
/lib/dracut-lib.sh@1088(make_trace_mem): return
/init@151(): getarg rd.break=pre-trigger -d rdbreak=pre-trigger
/lib/dracut-lib.sh@173(getarg): debug_off
/lib/dracut-lib.sh@23(debug_off): set +x
/lib/dracut-lib.sh@236(getarg): return 1
/init@152(): source_hook pre-trigger
/lib/dracut-lib.sh@424(source_hook): local _dir
/lib/dracut-lib.sh@425(source_hook): _dir=pre-trigger
/lib/dracut-lib.sh@426(source_hook): shift
/lib/dracut-lib.sh@427(source_hook): source_all /lib/dracut/hooks/pre-trigger
/lib/dracut-lib.sh@406(source_all): local f
/lib/dracut-lib.sh@407(source_all): local _dir
/lib/dracut-lib.sh@408(source_all): _dir=/lib/dracut/hooks/pre-trigger
/lib/dracut-lib.sh@409(source_all): shift
/lib/dracut-lib.sh@410(source_all): '[' /lib/dracut/hooks/pre-trigger ']'
/lib/dracut-lib.sh@410(source_all): '[' -d //lib/dracut/hooks/pre-trigger ']'
/lib/dracut-lib.sh@411(source_all): for f in "/$_dir"/*.sh
/lib/dracut-lib.sh@412(source_all): '[' -e //lib/dracut/hooks/pre-trigger/01-load-modsign-keys.sh ']'
/lib/dracut-lib.sh@415(source_all): . //lib/dracut/hooks/pre-trigger/01-load-modsign-keys.sh
///lib/dracut/hooks/pre-trigger/01-load-modsign-keys.sh@8(source): for x in /lib/modules/keys/*
///lib/dracut/hooks/pre-trigger/01-load-modsign-keys.sh@9(source): '[' '/lib/modules/keys/*' = '/lib/modules/keys/*' ']'
///lib/dracut/hooks/pre-trigger/01-load-modsign-keys.sh@9(source): break
/lib/dracut-lib.sh@411(source_all): for f in "/$_dir"/*.sh
/lib/dracut-lib.sh@412(source_all): '[' -e //lib/dracut/hooks/pre-trigger/10-plymouth-pretrigger.sh ']'
/lib/dracut-lib.sh@415(source_all): . //lib/dracut/hooks/pre-trigger/10-plymouth-pretrigger.sh
///lib/dracut/hooks/pre-trigger/10-plymouth-pretrigger.sh@3(source): type plymouthd
///lib/dracut/hooks/pre-trigger/10-plymouth-pretrigger.sh@3(source): '[' -z '' ']'
///lib/dracut/hooks/pre-trigger/10-plymouth-pretrigger.sh@4(source): getargbool 1 plymouth.enable
//lib/dracut-lib.sh@247(getargbool): local _b
//lib/dracut-lib.sh@248(getargbool): unset _b
//lib/dracut-lib.sh@249(getargbool): local _default
//lib/dracut-lib.sh@250(getargbool): _default=1
//lib/dracut-lib.sh@251(getargbool): shift
///lib/dracut-lib.sh@252(getargbool): getarg plymouth.enable
///lib/dracut-lib.sh@173(getarg): debug_off
///lib/dracut-lib.sh@23(debug_off): set +x
///lib/dracut-lib.sh@236(getarg): return 1
//lib/dracut-lib.sh@252(getargbool): _b=
//lib/dracut-lib.sh@252(getargbool): _b=1
//lib/dracut-lib.sh@253(getargbool): '[' -n 1 ']'
//lib/dracut-lib.sh@254(getargbool): '[' 1 = 0 ']'
//lib/dracut-lib.sh@255(getargbool): '[' 1 = no ']'
//lib/dracut-lib.sh@256(getargbool): '[' 1 = off ']'
//lib/dracut-lib.sh@258(getargbool): return 0
///lib/dracut/hooks/pre-trigger/10-plymouth-pretrigger.sh@4(source): getargbool 1 rd.plymouth -d -n rd_NO_PLYMOUTH
//lib/dracut-lib.sh@247(getargbool): local _b
//lib/dracut-lib.sh@248(getargbool): unset _b
//lib/dracut-lib.sh@249(getargbool): local _default
//lib/dracut-lib.sh@250(getargbool): _default=1
//lib/dracut-lib.sh@251(getargbool): shift
///lib/dracut-lib.sh@252(getargbool): getarg rd.plymouth -d -n rd_NO_PLYMOUTH
///lib/dracut-lib.sh@173(getarg): debug_off
///lib/dracut-lib.sh@23(debug_off): set +x
///lib/dracut-lib.sh@236(getarg): return 1
//lib/dracut-lib.sh@252(getargbool): _b=
//lib/dracut-lib.sh@252(getargbool): _b=1
//lib/dracut-lib.sh@253(getargbool): '[' -n 1 ']'
//lib/dracut-lib.sh@254(getargbool): '[' 1 = 0 ']'
//lib/dracut-lib.sh@255(getargbool): '[' 1 = no ']'
//lib/dracut-lib.sh@256(getargbool): '[' 1 = off ']'
//lib/dracut-lib.sh@258(getargbool): return 0
///lib/dracut/hooks/pre-trigger/10-plymouth-pretrigger.sh@6(source): udevadm trigger --action=add --attr-match=class=0x030000
///lib/dracut/hooks/pre-trigger/10-plymouth-pretrigger.sh@8(source): udevadm trigger --action=add --subsystem-match=graphics --subsystem-match=drm --subsystem-match=tty --subsystem-match=acpi
///lib/dracut/hooks/pre-trigger/10-plymouth-pretrigger.sh@15(source): udevadm settle --timeout=180
///lib/dracut/hooks/pre-trigger/10-plymouth-pretrigger.sh@15(source): vinfo
//lib/dracut-lib.sh@101(vinfo): read -r line
//lib/dracut-lib.sh@101(vinfo): '[' -n '' ']'
///lib/dracut/hooks/pre-trigger/10-plymouth-pretrigger.sh@17(source): info 'Starting plymouth daemon'
//lib/dracut-lib.sh@75(info): check_quiet
//lib/dracut-lib.sh@475(check_quiet): '[' -z '' ']'
//lib/dracut-lib.sh@476(check_quiet): DRACUT_QUIET=yes
//lib/dracut-lib.sh@477(check_quiet): getargbool 0 rd.info -d -y rdinfo
//lib/dracut-lib.sh@247(getargbool): local _b
//lib/dracut-lib.sh@248(getargbool): unset _b
//lib/dracut-lib.sh@249(getargbool): local _default
//lib/dracut-lib.sh@250(getargbool): _default=0
//lib/dracut-lib.sh@251(getargbool): shift
///lib/dracut-lib.sh@252(getargbool): getarg rd.info -d -y rdinfo
///lib/dracut-lib.sh@173(getarg): debug_off
///lib/dracut-lib.sh@23(debug_off): set +x
///lib/dracut-lib.sh@236(getarg): return 1
//lib/dracut-lib.sh@252(getargbool): _b=
//lib/dracut-lib.sh@252(getargbool): _b=0
//lib/dracut-lib.sh@253(getargbool): '[' -n 0 ']'
//lib/dracut-lib.sh@254(getargbool): '[' 0 = 0 ']'
//lib/dracut-lib.sh@254(getargbool): return 1
//lib/dracut-lib.sh@478(check_quiet): getargbool 0 rd.debug -d -y rdinitdebug
//lib/dracut-lib.sh@247(getargbool): local _b
//lib/dracut-lib.sh@248(getargbool): unset _b
//lib/dracut-lib.sh@249(getargbool): local _default
//lib/dracut-lib.sh@250(getargbool): _default=0
//lib/dracut-lib.sh@251(getargbool): shift
///lib/dracut-lib.sh@252(getargbool): getarg rd.debug -d -y rdinitdebug
///lib/dracut-lib.sh@173(getarg): debug_off
///lib/dracut-lib.sh@23(debug_off): set +x
///lib/dracut-lib.sh@228(getarg): return 0
//lib/dracut-lib.sh@252(getargbool): _b=
//lib/dracut-lib.sh@253(getargbool): '[' -n '' ']'
//lib/dracut-lib.sh@258(getargbool): return 0
//lib/dracut-lib.sh@478(check_quiet): DRACUT_QUIET=no
//lib/dracut-lib.sh@479(check_quiet): getarg quiet
//lib/dracut-lib.sh@173(getarg): debug_off
//lib/dracut-lib.sh@23(debug_off): set +x
//lib/dracut-lib.sh@228(getarg): return 0
///lib/dracut-lib.sh@480(check_quiet): getarg loglevel=
///lib/dracut-lib.sh@173(getarg): debug_off
///lib/dracut-lib.sh@23(debug_off): set +x
///lib/dracut-lib.sh@236(getarg): return 1
//lib/dracut-lib.sh@480(check_quiet): a=
//lib/dracut-lib.sh@481(check_quiet): '[' -n '' ']'
//lib/dracut-lib.sh@482(check_quiet): export DRACUT_QUIET
//lib/dracut-lib.sh@76(info): echo '<30>dracut: Starting plymouth daemon'
//lib/dracut-lib.sh@77(info): '[' no '!=' yes ']'
//lib/dracut-lib.sh@78(info): echo 'dracut: Starting plymouth daemon'
dracut: Starting plymouth daemon
///lib/dracut/hooks/pre-trigger/10-plymouth-pretrigger.sh@18(source): mkdir -m 0755 /run/plymouth
///lib/dracut/hooks/pre-trigger/10-plymouth-pretrigger.sh@19(source): read -r consoledev rest
///lib/dracut/hooks/pre-trigger/10-plymouth-pretrigger.sh@20(source): consoledev=tty0
///lib/dracut/hooks/pre-trigger/10-plymouth-pretrigger.sh@21(source): '[' -x /lib/udev/console_init -a -e /dev/tty0 ']'
///lib/dracut/hooks/pre-trigger/10-plymouth-pretrigger.sh@21(source): /lib/udev/console_init /dev/tty0
///lib/dracut/hooks/pre-trigger/10-plymouth-pretrigger.sh@22(source): plymouthd --attach-to-session --pid-file /run/plymouth/pid
///lib/dracut/hooks/pre-trigger/10-plymouth-pretrigger.sh@23(source): plymouth --show-splash
///lib/dracut/hooks/pre-trigger/10-plymouth-pretrigger.sh@23(source): vinfo
//lib/dracut-lib.sh@101(vinfo): read -r line
//lib/dracut-lib.sh@101(vinfo): '[' -n '' ']'
///lib/dracut/hooks/pre-trigger/10-plymouth-pretrigger.sh@25(source): '[' -x /lib/udev/console_init -a -e /dev/tty0 ']'
///lib/dracut/hooks/pre-trigger/10-plymouth-pretrigger.sh@25(source): /lib/udev/console_init /dev/tty0
/init@154(): udevadm control --reload
/init@156(): udevadm trigger --type=subsystems --action=add
/init@157(): udevadm trigger --type=devices --action=add
/init@159(): make_trace_mem 'hook initqueue' 1:shortmem 2+:mem 3+:slab
/lib/dracut-lib.sh@1078(make_trace_mem): local log_level prefix msg msg_printed
/lib/dracut-lib.sh@1079(make_trace_mem): local trace trace_level trace_in_higher_levels insert_trace
/lib/dracut-lib.sh@1081(make_trace_mem): msg='hook initqueue'
/lib/dracut-lib.sh@1082(make_trace_mem): shift
/lib/dracut-lib.sh@1084(make_trace_mem): prefix='[debug_mem]'
/lib/dracut-lib.sh@1085(make_trace_mem): log_level=0
/lib/dracut-lib.sh@1087(make_trace_mem): '[' -z 0 ']'
/lib/dracut-lib.sh@1087(make_trace_mem): '[' 0 -le 0 ']'
/lib/dracut-lib.sh@1088(make_trace_mem): return
/init@160(): getarg rd.break=initqueue -d rdbreak=initqueue
/lib/dracut-lib.sh@173(getarg): debug_off
/lib/dracut-lib.sh@23(debug_off): set +x
/lib/dracut-lib.sh@236(getarg): return 1
//init@162(): getarg rd.retry -d rd_retry=
//lib/dracut-lib.sh@173(getarg): debug_off
//lib/dracut-lib.sh@23(debug_off): set +x
//lib/dracut-lib.sh@236(getarg): return 1
/init@162(): RDRETRY=
/init@163(): RDRETRY=180
/init@164(): RDRETRY=360
/init@165(): export RDRETRY
/init@166(): main_loop=0
/init@167(): export main_loop
/init@168(): :
/init@170(): check_finished
/lib/dracut-lib.sh@431(check_finished): local f
/lib/dracut-lib.sh@432(check_finished): for f in "$hookdir"/initqueue/finished/*.sh
/lib/dracut-lib.sh@433(check_finished): '[' '/lib/dracut/hooks/initqueue/finished/devexists-\x2fdev\x2fdisk\x2fby-label\x2fGARUDA_HYPRLAND_RAPTOR.sh' = '/lib/dracut/hooks/initqueue/finished/*.sh' ']'
/lib/dracut-lib.sh@435(check_finished): '[' -e '/lib/dracut/hooks/initqueue/finished/devexists-\x2fdev\x2fdisk\x2fby-label\x2fGARUDA_HYPRLAND_RAPTOR.sh' ']'
/lib/dracut-lib.sh@435(check_finished): . '/lib/dracut/hooks/initqueue/finished/devexists-\x2fdev\x2fdisk\x2fby-label\x2fGARUDA_HYPRLAND_RAPTOR.sh'
//lib/dracut/hooks/initqueue/finished/devexists-\x2fdev\x2fdisk\x2fby-label\x2fGARUDA_HYPRLAND_RAPTOR.sh@1(source): '[' -e /dev/disk/by-label/GARUDA_HYPRLAND_RAPTOR ']'
/lib/dracut-lib.sh@435(check_finished): return 1
/init@172(): udevsettle
/lib/dracut-lib.sh@523(udevsettle): udevadm settle --exit-if-exists=/lib/dracut/hooks/initqueue/work
/init@174(): check_finished
/lib/dracut-lib.sh@431(check_finished): local f
/lib/dracut-lib.sh@432(check_finished): for f in "$hookdir"/initqueue/finished/*.sh
/lib/dracut-lib.sh@433(check_finished): '[' '/lib/dracut/hooks/initqueue/finished/devexists-\x2fdev\x2fdisk\x2fby-label\x2fGARUDA_HYPRLAND_RAPTOR.sh' = '/lib/dracut/hooks/initqueue/finished/*.sh' ']'
/lib/dracut-lib.sh@435(check_finished): '[' -e '/lib/dracut/hooks/initqueue/finished/devexists-\x2fdev\x2fdisk\x2fby-label\x2fGARUDA_HYPRLAND_RAPTOR.sh' ']'
/lib/dracut-lib.sh@435(check_finished): . '/lib/dracut/hooks/initqueue/finished/devexists-\x2fdev\x2fdisk\x2fby-label\x2fGARUDA_HYPRLAND_RAPTOR.sh'
//lib/dracut/hooks/initqueue/finished/devexists-\x2fdev\x2fdisk\x2fby-label\x2fGARUDA_HYPRLAND_RAPTOR.sh@1(source): '[' -e /dev/disk/by-label/GARUDA_HYPRLAND_RAPTOR ']'
/lib/dracut-lib.sh@435(check_finished): return 1
/init@176(): '[' -f /lib/dracut/hooks/initqueue/work ']'
/init@177(): rm -f -- /lib/dracut/hooks/initqueue/work
/init@180(): for job in "$hookdir"/initqueue/*.sh
/init@181(): '[' -e /lib/dracut/hooks/initqueue/console_init_tty0.sh ']'
/init@183(): job=/lib/dracut/hooks/initqueue/console_init_tty0.sh
/init@183(): . /lib/dracut/hooks/initqueue/console_init_tty0.sh
//lib/dracut/hooks/initqueue/console_init_tty0.sh@1(): '[' -e /lib/dracut/hooks/initqueue/console_init_tty0.sh ']'
//lib/dracut/hooks/initqueue/console_init_tty0.sh@1(): rm -f -- /lib/dracut/hooks/initqueue/console_init_tty0.sh
//lib/dracut/hooks/initqueue/console_init_tty0.sh@2(): /lib/udev/console_init /dev/tty0
/init@184(): check_finished
/lib/dracut-lib.sh@431(check_finished): local f
/lib/dracut-lib.sh@432(check_finished): for f in "$hookdir"/initqueue/finished/*.sh
/lib/dracut-lib.sh@433(check_finished): '[' '/lib/dracut/hooks/initqueue/finished/devexists-\x2fdev\x2fdisk\x2fby-label\x2fGARUDA_HYPRLAND_RAPTOR.sh' = '/lib/dracut/hooks/initqueue/finished/*.sh' ']'
/lib/dracut-lib.sh@435(check_finished): '[' -e '/lib/dracut/hooks/initqueue/finished/devexists-\x2fdev\x2fdisk\x2fby-label\x2fGARUDA_HYPRLAND_RAPTOR.sh' ']'
/lib/dracut-lib.sh@435(check_finished): . '/lib/dracut/hooks/initqueue/finished/devexists-\x2fdev\x2fdisk\x2fby-label\x2fGARUDA_HYPRLAND_RAPTOR.sh'
//lib/dracut/hooks/initqueue/finished/devexists-\x2fdev\x2fdisk\x2fby-label\x2fGARUDA_HYPRLAND_RAPTOR.sh@1(source): '[' -e /dev/disk/by-label/GARUDA_HYPRLAND_RAPTOR ']'
/lib/dracut-lib.sh@435(check_finished): return 1
/init@187(): udevadm settle --timeout=0
/init@189(): for job in "$hookdir"/initqueue/settled/*.sh
/init@190(): '[' -e '/lib/dracut/hooks/initqueue/settled/*.sh' ']'
/init@190(): break
/init@196(): udevadm settle --timeout=0
/init@199(): sleep 0.5
/init@201(): '[' 0 -gt 240 ']'
/init@211(): main_loop=1
/init@212(): '[' 1 -gt 360 ']'
/init@168(): :
/init@170(): check_finished
/lib/dracut-lib.sh@431(check_finished): local f
/lib/dracut-lib.sh@432(check_finished): for f in "$hookdir"/initqueue/finished/*.sh
/lib/dracut-lib.sh@433(check_finished): '[' '/lib/dracut/hooks/initqueue/finished/devexists-\x2fdev\x2fdisk\x2fby-label\x2fGARUDA_HYPRLAND_RAPTOR.sh' = '/lib/dracut/hooks/initqueue/finished/*.sh' ']'
/lib/dracut-lib.sh@435(check_finished): '[' -e '/lib/dracut/hooks/initqueue/finished/devexists-\x2fdev\x2fdisk\x2fby-label\x2fGARUDA_HYPRLAND_RAPTOR.sh' ']'
/lib/dracut-lib.sh@435(check_finished): . '/lib/dracut/hooks/initqueue/finished/devexists-\x2fdev\x2fdisk\x2fby-label\x2fGARUDA_HYPRLAND_RAPTOR.sh'
//lib/dracut/hooks/initqueue/finished/devexists-\x2fdev\x2fdisk\x2fby-label\x2fGARUDA_HYPRLAND_RAPTOR.sh@1(source): '[' -e /dev/disk/by-label/GARUDA_HYPRLAND_RAPTOR ']'
/lib/dracut-lib.sh@435(check_finished): return 1
/init@172(): udevsettle
/lib/dracut-lib.sh@523(udevsettle): udevadm settle --exit-if-exists=/lib/dracut/hooks/initqueue/work
/init@174(): check_finished
/lib/dracut-lib.sh@431(check_finished): local f
/lib/dracut-lib.sh@432(check_finished): for f in "$hookdir"/initqueue/finished/*.sh
/lib/dracut-lib.sh@433(check_finished): '[' '/lib/dracut/hooks/initqueue/finished/devexists-\x2fdev\x2fdisk\x2fby-label\x2fGARUDA_HYPRLAND_RAPTOR.sh' = '/lib/dracut/hooks/initqueue/finished/*.sh' ']'
/lib/dracut-lib.sh@435(check_finished): '[' -e '/lib/dracut/hooks/initqueue/finished/devexists-\x2fdev\x2fdisk\x2fby-label\x2fGARUDA_HYPRLAND_RAPTOR.sh' ']'
/lib/dracut-lib.sh@435(check_finished): . '/lib/dracut/hooks/initqueue/finished/devexists-\x2fdev\x2fdisk\x2fby-label\x2fGARUDA_HYPRLAND_RAPTOR.sh'
//lib/dracut/hooks/initqueue/finished/devexists-\x2fdev\x2fdisk\x2fby-label\x2fGARUDA_HYPRLAND_RAPTOR.sh@1(source): '[' -e /dev/disk/by-label/GARUDA_HYPRLAND_RAPTOR ']'
/lib/dracut-lib.sh@435(check_finished): return 1
/init@176(): '[' -f /lib/dracut/hooks/initqueue/work ']'
/init@177(): rm -f -- /lib/dracut/hooks/initqueue/work
/init@180(): for job in "$hookdir"/initqueue/*.sh
/init@181(): '[' -e /lib/dracut/hooks/initqueue/console_init_tty0.sh ']'
/init@183(): job=/lib/dracut/hooks/initqueue/console_init_tty0.sh
/init@183(): . /lib/dracut/hooks/initqueue/console_init_tty0.sh
//lib/dracut/hooks/initqueue/console_init_tty0.sh@1(): '[' -e /lib/dracut/hooks/initqueue/console_init_tty0.sh ']'
//lib/dracut/hooks/initqueue/console_init_tty0.sh@1(): rm -f -- /lib/dracut/hooks/initqueue/console_init_tty0.sh
//lib/dracut/hooks/initqueue/console_init_tty0.sh@2(): /lib/udev/console_init /dev/tty0
/init@184(): check_finished
/lib/dracut-lib.sh@431(check_finished): local f
/lib/dracut-lib.sh@432(check_finished): for f in "$hookdir"/initqueue/finished/*.sh
/lib/dracut-lib.sh@433(check_finished): '[' '/lib/dracut/hooks/initqueue/finished/devexists-\x2fdev\x2fdisk\x2fby-label\x2fGARUDA_HYPRLAND_RAPTOR.sh' = '/lib/dracut/hooks/initqueue/finished/*.sh' ']'
/lib/dracut-lib.sh@435(check_finished): '[' -e '/lib/dracut/hooks/initqueue/finished/devexists-\x2fdev\x2fdisk\x2fby-label\x2fGARUDA_HYPRLAND_RAPTOR.sh' ']'
/lib/dracut-lib.sh@435(check_finished): . '/lib/dracut/hooks/initqueue/finished/devexists-\x2fdev\x2fdisk\x2fby-label\x2fGARUDA_HYPRLAND_RAPTOR.sh'
//lib/dracut/hooks/initqueue/finished/devexists-\x2fdev\x2fdisk\x2fby-label\x2fGARUDA_HYPRLAND_RAPTOR.sh@1(source): '[' -e /dev/disk/by-label/GARUDA_HYPRLAND_RAPTOR ']'
/lib/dracut-lib.sh@435(check_finished): return 1
/init@187(): udevadm settle --timeout=0
/init@187(): continue
/init@168(): :
/init@170(): check_finished
/lib/dracut-lib.sh@431(check_finished): local f
/lib/dracut-lib.sh@432(check_finished): for f in "$hookdir"/initqueue/finished/*.sh
/lib/dracut-lib.sh@433(check_finished): '[' '/lib/dracut/hooks/initqueue/finished/devexists-\x2fdev\x2fdisk\x2fby-label\x2fGARUDA_HYPRLAND_RAPTOR.sh' = '/lib/dracut/hooks/initqueue/finished/*.sh' ']'
/lib/dracut-lib.sh@435(check_finished): '[' -e '/lib/dracut/hooks/initqueue/finished/devexists-\x2fdev\x2fdisk\x2fby-label\x2fGARUDA_HYPRLAND_RAPTOR.sh' ']'
/lib/dracut-lib.sh@435(check_finished): . '/lib/dracut/hooks/initqueue/finished/devexists-\x2fdev\x2fdisk\x2fby-label\x2fGARUDA_HYPRLAND_RAPTOR.sh'
//lib/dracut/hooks/initqueue/finished/devexists-\x2fdev\x2fdisk\x2fby-label\x2fGARUDA_HYPRLAND_RAPTOR.sh@1(source): '[' -e /dev/disk/by-label/GARUDA_HYPRLAND_RAPTOR ']'
/lib/dracut-lib.sh@435(check_finished): return 1
/init@172(): udevsettle
/lib/dracut-lib.sh@523(udevsettle): udevadm settle --exit-if-exists=/lib/dracut/hooks/initqueue/work
/init@174(): check_finished
/lib/dracut-lib.sh@431(check_finished): local f
/lib/dracut-lib.sh@432(check_finished): for f in "$hookdir"/initqueue/finished/*.sh
/lib/dracut-lib.sh@433(check_finished): '[' '/lib/dracut/hooks/initqueue/finished/devexists-\x2fdev\x2fdisk\x2fby-label\x2fGARUDA_HYPRLAND_RAPTOR.sh' = '/lib/dracut/hooks/initqueue/finished/*.sh' ']'
/lib/dracut-lib.sh@435(check_finished): '[' -e '/lib/dracut/hooks/initqueue/finished/devexists-\x2fdev\x2fdisk\x2fby-label\x2fGARUDA_HYPRLAND_RAPTOR.sh' ']'
/lib/dracut-lib.sh@435(check_finished): . '/lib/dracut/hooks/initqueue/finished/devexists-\x2fdev\x2fdisk\x2fby-label\x2fGARUDA_HYPRLAND_RAPTOR.sh'
//lib/dracut/hooks/initqueue/finished/devexists-\x2fdev\x2fdisk\x2fby-label\x2fGARUDA_HYPRLAND_RAPTOR.sh@1(source): '[' -e /dev/disk/by-label/GARUDA_HYPRLAND_RAPTOR ']'
/lib/dracut-lib.sh@435(check_finished): return 1
/init@176(): '[' -f /lib/dracut/hooks/initqueue/work ']'
/init@180(): for job in "$hookdir"/initqueue/*.sh
/init@181(): '[' -e '/lib/dracut/hooks/initqueue/*.sh' ']'
/init@181(): break
/init@187(): udevadm settle --timeout=0
/init@189(): for job in "$hookdir"/initqueue/settled/*.sh
/init@190(): '[' -e '/lib/dracut/hooks/initqueue/settled/*.sh' ']'
/init@190(): break
/init@196(): udevadm settle --timeout=0
/init@199(): sleep 0.5
/init@201(): '[' 1 -gt 240 ']'
/init@211(): main_loop=2
/init@212(): '[' 2 -gt 360 ']'
/init@168(): :
/init@170(): check_finished
/lib/dracut-lib.sh@431(check_finished): local f
/lib/dracut-lib.sh@432(check_finished): for f in "$hookdir"/initqueue/finished/*.sh
/lib/dracut-lib.sh@433(check_finished): '[' '/lib/dracut/hooks/initqueue/finished/devexists-\x2fdev\x2fdisk\x2fby-label\x2fGARUDA_HYPRLAND_RAPTOR.sh' = '/lib/dracut/hooks/initqueue/finished/*.sh' ']'
/lib/dracut-lib.sh@435(check_finished): '[' -e '/lib/dracut/hooks/initqueue/finished/devexists-\x2fdev\x2fdisk\x2fby-label\x2fGARUDA_HYPRLAND_RAPTOR.sh' ']'
/lib/dracut-lib.sh@435(check_finished): . '/lib/dracut/hooks/initqueue/finished/devexists-\x2fdev\x2fdisk\x2fby-label\x2fGARUDA_HYPRLAND_RAPTOR.sh'
//lib/dracut/hooks/initqueue/finished/devexists-\x2fdev\x2fdisk\x2fby-label\x2fGARUDA_HYPRLAND_RAPTOR.sh@1(source): '[' -e /dev/disk/by-label/GARUDA_HYPRLAND_RAPTOR ']'
/lib/dracut-lib.sh@435(check_finished): return 1
/init@172(): udevsettle
/lib/dracut-lib.sh@523(udevsettle): udevadm settle --exit-if-exists=/lib/dracut/hooks/initqueue/work
/init@174(): check_finished
/lib/dracut-lib.sh@431(check_finished): local f
/lib/dracut-lib.sh@432(check_finished): for f in "$hookdir"/initqueue/finished/*.sh
/lib/dracut-lib.sh@433(check_finished): '[' '/lib/dracut/hooks/initqueue/finished/devexists-\x2fdev\x2fdisk\x2fby-label\x2fGARUDA_HYPRLAND_RAPTOR.sh' = '/lib/dracut/hooks/initqueue/finished/*.sh' ']'
/lib/dracut-lib.sh@435(check_finished): '[' -e '/lib/dracut/hooks/initqueue/finished/devexists-\x2fdev\x2fdisk\x2fby-label\x2fGARUDA_HYPRLAND_RAPTOR.sh' ']'
/lib/dracut-lib.sh@435(check_finished): . '/lib/dracut/hooks/initqueue/finished/devexists-\x2fdev\x2fdisk\x2fby-label\x2fGARUDA_HYPRLAND_RAPTOR.sh'
//lib/dracut/hooks/initqueue/finished/devexists-\x2fdev\x2fdisk\x2fby-label\x2fGARUDA_HYPRLAND_RAPTOR.sh@1(source): '[' -e /dev/disk/by-label/GARUDA_HYPRLAND_RAPTOR ']'
/lib/dracut-lib.sh@435(check_finished): return 1
/init@176(): '[' -f /lib/dracut/hooks/initqueue/work ']'
/init@180(): for job in "$hookdir"/initqueue/*.sh
/init@181(): '[' -e '/lib/dracut/hooks/initqueue/*.sh' ']'
/init@181(): break
/init@187(): udevadm settle --timeout=0
/init@189(): for job in "$hookdir"/initqueue/settled/*.sh
/init@190(): '[' -e '/lib/dracut/hooks/initqueue/settled/*.sh' ']'
/init@190(): break
/init@196(): udevadm settle --timeout=0
/init@199(): sleep 0.5
/init@201(): '[' 2 -gt 240 ']'
/init@211(): main_loop=3
/init@212(): '[' 3 -gt 360 ']'
/init@168(): :
/init@170(): check_finished
/lib/dracut-lib.sh@431(check_finished): local f
/lib/dracut-lib.sh@432(check_finished): for f in "$hookdir"/initqueue/finished/*.sh
/lib/dracut-lib.sh@433(check_finished): '[' '/lib/dracut/hooks/initqueue/finished/devexists-\x2fdev\x2fdisk\x2fby-label\x2fGARUDA_HYPRLAND_RAPTOR.sh' = '/lib/dracut/hooks/initqueue/finished/*.sh' ']'
/lib/dracut-lib.sh@435(check_finished): '[' -e '/lib/dracut/hooks/initqueue/finished/devexists-\x2fdev\x2fdisk\x2fby-label\x2fGARUDA_HYPRLAND_RAPTOR.sh' ']'
/lib/dracut-lib.sh@435(check_finished): . '/lib/dracut/hooks/initqueue/finished/devexists-\x2fdev\x2fdisk\x2fby-label\x2fGARUDA_HYPRLAND_RAPTOR.sh'
//lib/dracut/hooks/initqueue/finished/devexists-\x2fdev\x2fdisk\x2fby-label\x2fGARUDA_HYPRLAND_RAPTOR.sh@1(source): '[' -e /dev/disk/by-label/GARUDA_HYPRLAND_RAPTOR ']'
/lib/dracut-lib.sh@435(check_finished): return 1
/init@172(): udevsettle
/lib/dracut-lib.sh@523(udevsettle): udevadm settle --exit-if-exists=/lib/dracut/hooks/initqueue/work
/init@174(): check_finished
/lib/dracut-lib.sh@431(check_finished): local f
/lib/dracut-lib.sh@432(check_finished): for f in "$hookdir"/initqueue/finished/*.sh
/lib/dracut-lib.sh@433(check_finished): '[' '/lib/dracut/hooks/initqueue/finished/devexists-\x2fdev\x2fdisk\x2fby-label\x2fGARUDA_HYPRLAND_RAPTOR.sh' = '/lib/dracut/hooks/initqueue/finished/*.sh' ']'
/lib/dracut-lib.sh@435(check_finished): '[' -e '/lib/dracut/hooks/initqueue/finished/devexists-\x2fdev\x2fdisk\x2fby-label\x2fGARUDA_HYPRLAND_RAPTOR.sh' ']'
/lib/dracut-lib.sh@435(check_finished): . '/lib/dracut/hooks/initqueue/finished/devexists-\x2fdev\x2fdisk\x2fby-label\x2fGARUDA_HYPRLAND_RAPTOR.sh'
//lib/dracut/hooks/initqueue/finished/devexists-\x2fdev\x2fdisk\x2fby-label\x2fGARUDA_HYPRLAND_RAPTOR.sh@1(source): '[' -e /dev/disk/by-label/GARUDA_HYPRLAND_RAPTOR ']'
/lib/dracut-lib.sh@435(check_finished): return 1
/init@176(): '[' -f /lib/dracut/hooks/initqueue/work ']'
/init@180(): for job in "$hookdir"/initqueue/*.sh
/init@181(): '[' -e '/lib/dracut/hooks/initqueue/*.sh' ']'
/init@181(): break
/init@187(): udevadm settle --timeout=0
/init@189(): for job in "$hookdir"/initqueue/settled/*.sh
/init@190(): '[' -e '/lib/dracut/hooks/initqueue/settled/*.sh' ']'
/init@190(): break
/init@196(): udevadm settle --timeout=0
/init@199(): sleep 0.5
/init@201(): '[' 3 -gt 240 ']'
/init@211(): main_loop=4
/init@212(): '[' 4 -gt 360 ']'
/init@168(): :
/init@170(): check_finished
/lib/dracut-lib.sh@431(check_finished): local f
/lib/dracut-lib.sh@432(check_finished): for f in "$hookdir"/initqueue/finished/*.sh
/lib/dracut-lib.sh@433(check_finished): '[' '/lib/dracut/hooks/initqueue/finished/devexists-\x2fdev\x2fdisk\x2fby-label\x2fGARUDA_HYPRLAND_RAPTOR.sh' = '/lib/dracut/hooks/initqueue/finished/*.sh' ']'
/lib/dracut-lib.sh@435(check_finished): '[' -e '/lib/dracut/hooks/initqueue/finished/devexists-\x2fdev\x2fdisk\x2fby-label\x2fGARUDA_HYPRLAND_RAPTOR.sh' ']'
/lib/dracut-lib.sh@435(check_finished): . '/lib/dracut/hooks/initqueue/finished/devexists-\x2fdev\x2fdisk\x2fby-label\x2fGARUDA_HYPRLAND_RAPTOR.sh'
//lib/dracut/hooks/initqueue/finished/devexists-\x2fdev\x2fdisk\x2fby-label\x2fGARUDA_HYPRLAND_RAPTOR.sh@1(source): '[' -e /dev/disk/by-label/GARUDA_HYPRLAND_RAPTOR ']'
/lib/dracut-lib.sh@435(check_finished): return 1
/init@172(): udevsettle
/lib/dracut-lib.sh@523(udevsettle): udevadm settle --exit-if-exists=/lib/dracut/hooks/initqueue/work
/init@174(): check_finished
/lib/dracut-lib.sh@431(check_finished): local f
/lib/dracut-lib.sh@432(check_finished): for f in "$hookdir"/initqueue/finished/*.sh
/lib/dracut-lib.sh@433(check_finished): '[' '/lib/dracut/hooks/initqueue/finished/devexists-\x2fdev\x2fdisk\x2fby-label\x2fGARUDA_HYPRLAND_RAPTOR.sh' = '/lib/dracut/hooks/initqueue/finished/*.sh' ']'
/lib/dracut-lib.sh@435(check_finished): '[' -e '/lib/dracut/hooks/initqueue/finished/devexists-\x2fdev\x2fdisk\x2fby-label\x2fGARUDA_HYPRLAND_RAPTOR.sh' ']'
/lib/dracut-lib.sh@435(check_finished): . '/lib/dracut/hooks/initqueue/finished/devexists-\x2fdev\x2fdisk\x2fby-label\x2fGARUDA_HYPRLAND_RAPTOR.sh'
//lib/dracut/hooks/initqueue/finished/devexists-\x2fdev\x2fdisk\x2fby-label\x2fGARUDA_HYPRLAND_RAPTOR.sh@1(source): '[' -e /dev/disk/by-label/GARUDA_HYPRLAND_RAPTOR ']'
/lib/dracut-lib.sh@435(check_finished): return 1
/init@176(): '[' -f /lib/dracut/hooks/initqueue/work ']'
/init@180(): for job in "$hookdir"/initqueue/*.sh
/init@181(): '[' -e '/lib/dracut/hooks/initqueue/*.sh' ']'
/init@181(): break
/init@187(): udevadm settle --timeout=0
/init@189(): for job in "$hookdir"/initqueue/settled/*.sh
/init@190(): '[' -e '/lib/dracut/hooks/initqueue/settled/*.sh' ']'
/init@190(): break
/init@196(): udevadm settle --timeout=0
/init@199(): sleep 0.5
/init@201(): '[' 4 -gt 240 ']'
/init@211(): main_loop=5
/init@212(): '[' 5 -gt 360 ']'
/init@168(): :
/init@170(): check_finished
/lib/dracut-lib.sh@431(check_finished): local f
/lib/dracut-lib.sh@432(check_finished): for f in "$hookdir"/initqueue/finished/*.sh
/lib/dracut-lib.sh@433(check_finished): '[' '/lib/dracut/hooks/initqueue/finished/devexists-\x2fdev\x2fdisk\x2fby-label\x2fGARUDA_HYPRLAND_RAPTOR.sh' = '/lib/dracut/hooks/initqueue/finished/*.sh' ']'
/lib/dracut-lib.sh@435(check_finished): '[' -e '/lib/dracut/hooks/initqueue/finished/devexists-\x2fdev\x2fdisk\x2fby-label\x2fGARUDA_HYPRLAND_RAPTOR.sh' ']'
/lib/dracut-lib.sh@435(check_finished): . '/lib/dracut/hooks/initqueue/finished/devexists-\x2fdev\x2fdisk\x2fby-label\x2fGARUDA_HYPRLAND_RAPTOR.sh'
//lib/dracut/hooks/initqueue/finished/devexists-\x2fdev\x2fdisk\x2fby-label\x2fGARUDA_HYPRLAND_RAPTOR.sh@1(source): '[' -e /dev/disk/by-label/GARUDA_HYPRLAND_RAPTOR ']'
/lib/dracut-lib.sh@435(check_finished): return 1
/init@172(): udevsettle
/lib/dracut-lib.sh@523(udevsettle): udevadm settle --exit-if-exists=/lib/dracut/hooks/initqueue/work
/init@174(): check_finished
/lib/dracut-lib.sh@431(check_finished): local f
/lib/dracut-lib.sh@432(check_finished): for f in "$hookdir"/initqueue/finished/*.sh
/lib/dracut-lib.sh@433(check_finished): '[' '/lib/dracut/hooks/initqueue/finished/devexists-\x2fdev\x2fdisk\x2fby-label\x2fGARUDA_HYPRLAND_RAPTOR.sh' = '/lib/dracut/hooks/initqueue/finished/*.sh' ']'
/lib/dracut-lib.sh@435(check_finished): '[' -e '/lib/dracut/hooks/initqueue/finished/devexists-\x2fdev\x2fdisk\x2fby-label\x2fGARUDA_HYPRLAND_RAPTOR.sh' ']'
/lib/dracut-lib.sh@435(check_finished): . '/lib/dracut/hooks/initqueue/finished/devexists-\x2fdev\x2fdisk\x2fby-label\x2fGARUDA_HYPRLAND_RAPTOR.sh'
//lib/dracut/hooks/initqueue/finished/devexists-\x2fdev\x2fdisk\x2fby-label\x2fGARUDA_HYPRLAND_RAPTOR.sh@1(source): '[' -e /dev/disk/by-label/GARUDA_HYPRLAND_RAPTOR ']'
/lib/dracut-lib.sh@435(check_finished): return 1
/init@176(): '[' -f /lib/dracut/hooks/initqueue/work ']'
/init@180(): for job in "$hookdir"/initqueue/*.sh
/init@181(): '[' -e '/lib/dracut/hooks/initqueue/*.sh' ']'
/init@181(): break
/init@187(): udevadm settle --timeout=0
/init@189(): for job in "$hookdir"/initqueue/settled/*.sh
/init@190(): '[' -e '/lib/dracut/hooks/initqueue/settled/*.sh' ']'
/init@190(): break
/init@196(): udevadm settle --timeout=0
/init@199(): sleep 0.5
/init@201(): '[' 5 -gt 240 ']'
/init@211(): main_loop=6
/init@212(): '[' 6 -gt 360 ']'
/init@168(): :
/init@170(): check_finished
/lib/dracut-lib.sh@431(check_finished): local f
/lib/dracut-lib.sh@432(check_finished): for f in "$hookdir"/initqueue/finished/*.sh
/lib/dracut-lib.sh@433(check_finished): '[' '/lib/dracut/hooks/initqueue/finished/devexists-\x2fdev\x2fdisk\x2fby-label\x2fGARUDA_HYPRLAND_RAPTOR.sh' = '/lib/dracut/hooks/initqueue/finished/*.sh' ']'
/lib/dracut-lib.sh@435(check_finished): '[' -e '/lib/dracut/hooks/initqueue/finished/devexists-\x2fdev\x2fdisk\x2fby-label\x2fGARUDA_HYPRLAND_RAPTOR.sh' ']'
/lib/dracut-lib.sh@435(check_finished): . '/lib/dracut/hooks/initqueue/finished/devexists-\x2fdev\x2fdisk\x2fby-label\x2fGARUDA_HYPRLAND_RAPTOR.sh'
//lib/dracut/hooks/initqueue/finished/devexists-\x2fdev\x2fdisk\x2fby-label\x2fGARUDA_HYPRLAND_RAPTOR.sh@1(source): '[' -e /dev/disk/by-label/GARUDA_HYPRLAND_RAPTOR ']'
/lib/dracut-lib.sh@435(check_finished): return 1
/init@172(): udevsettle
/lib/dracut-lib.sh@523(udevsettle): udevadm settle --exit-if-exists=/lib/dracut/hooks/initqueue/work
/init@174(): check_finished
/lib/dracut-lib.sh@431(check_finished): local f
/lib/dracut-lib.sh@432(check_finished): for f in "$hookdir"/initqueue/finished/*.sh
/lib/dracut-lib.sh@433(check_finished): '[' '/lib/dracut/hooks/initqueue/finished/devexists-\x2fdev\x2fdisk\x2fby-label\x2fGARUDA_HYPRLAND_RAPTOR.sh' = '/lib/dracut/hooks/initqueue/finished/*.sh' ']'
/lib/dracut-lib.sh@435(check_finished): '[' -e '/lib/dracut/hooks/initqueue/finished/devexists-\x2fdev\x2fdisk\x2fby-label\x2fGARUDA_HYPRLAND_RAPTOR.sh' ']'
/lib/dracut-lib.sh@435(check_finished): . '/lib/dracut/hooks/initqueue/finished/devexists-\x2fdev\x2fdisk\x2fby-label\x2fGARUDA_HYPRLAND_RAPTOR.sh'
//lib/dracut/hooks/initqueue/finished/devexists-\x2fdev\x2fdisk\x2fby-label\x2fGARUDA_HYPRLAND_RAPTOR.sh@1(source): '[' -e /dev/disk/by-label/GARUDA_HYPRLAND_RAPTOR ']'
/lib/dracut-lib.sh@435(check_finished): return 1
/init@176(): '[' -f /lib/dracut/hooks/initqueue/work ']'
/init@180(): for job in "$hookdir"/initqueue/*.sh
/init@181(): '[' -e '/lib/dracut/hooks/initqueue/*.sh' ']'
/init@181(): break
/init@187(): udevadm settle --timeout=0
/init@189(): for job in "$hookdir"/initqueue/settled/*.sh
/init@190(): '[' -e '/lib/dracut/hooks/initqueue/settled/*.sh' ']'
/init@190(): break
/init@196(): udevadm settle --timeout=0
/init@199(): sleep 0.5
/init@201(): '[' 6 -gt 240 ']'
/init@211(): main_loop=7
/init@212(): '[' 7 -gt 360 ']'
/init@168(): :
/init@170(): check_finished
/lib/dracut-lib.sh@431(check_finished): local f
/lib/dracut-lib.sh@432(check_finished): for f in "$hookdir"/initqueue/finished/*.sh
/lib/dracut-lib.sh@433(check_finished): '[' '/lib/dracut/hooks/initqueue/finished/devexists-\x2fdev\x2fdisk\x2fby-label\x2fGARUDA_HYPRLAND_RAPTOR.sh' = '/lib/dracut/hooks/initqueue/finished/*.sh' ']'
/lib/dracut-lib.sh@435(check_finished): '[' -e '/lib/dracut/hooks/initqueue/finished/devexists-\x2fdev\x2fdisk\x2fby-label\x2fGARUDA_HYPRLAND_RAPTOR.sh' ']'
/lib/dracut-lib.sh@435(check_finished): . '/lib/dracut/hooks/initqueue/finished/devexists-\x2fdev\x2fdisk\x2fby-label\x2fGARUDA_HYPRLAND_RAPTOR.sh'
//lib/dracut/hooks/initqueue/finished/devexists-\x2fdev\x2fdisk\x2fby-label\x2fGARUDA_HYPRLAND_RAPTOR.sh@1(source): '[' -e /dev/disk/by-label/GARUDA_HYPRLAND_RAPTOR ']'
/lib/dracut-lib.sh@437(check_finished): return 0
/init@170(): break
/init@218(): unset job
/init@219(): unset queuetriggered
/init@220(): unset main_loop
/init@221(): unset RDRETRY
/init@225(): make_trace_mem 'hook pre-mount' 1:shortmem 2+:mem 3+:slab
/lib/dracut-lib.sh@1078(make_trace_mem): local log_level prefix msg msg_printed
/lib/dracut-lib.sh@1079(make_trace_mem): local trace trace_level trace_in_higher_levels insert_trace
/lib/dracut-lib.sh@1081(make_trace_mem): msg='hook pre-mount'
/lib/dracut-lib.sh@1082(make_trace_mem): shift
/lib/dracut-lib.sh@1084(make_trace_mem): prefix='[debug_mem]'
/lib/dracut-lib.sh@1085(make_trace_mem): log_level=0
/lib/dracut-lib.sh@1087(make_trace_mem): '[' -z 0 ']'
/lib/dracut-lib.sh@1087(make_trace_mem): '[' 0 -le 0 ']'
/lib/dracut-lib.sh@1088(make_trace_mem): return
/init@226(): getarg rd.break=pre-mount -d rdbreak=pre-mount
/lib/dracut-lib.sh@173(getarg): debug_off
/lib/dracut-lib.sh@23(debug_off): set +x
/lib/dracut-lib.sh@236(getarg): return 1
/init@227(): source_hook pre-mount
/lib/dracut-lib.sh@424(source_hook): local _dir
/lib/dracut-lib.sh@425(source_hook): _dir=pre-mount
/lib/dracut-lib.sh@426(source_hook): shift
/lib/dracut-lib.sh@427(source_hook): source_all /lib/dracut/hooks/pre-mount
/lib/dracut-lib.sh@406(source_all): local f
/lib/dracut-lib.sh@407(source_all): local _dir
/lib/dracut-lib.sh@408(source_all): _dir=/lib/dracut/hooks/pre-mount
/lib/dracut-lib.sh@409(source_all): shift
/lib/dracut-lib.sh@410(source_all): '[' /lib/dracut/hooks/pre-mount ']'
/lib/dracut-lib.sh@410(source_all): '[' -d //lib/dracut/hooks/pre-mount ']'
/lib/dracut-lib.sh@411(source_all): for f in "/$_dir"/*.sh
/lib/dracut-lib.sh@412(source_all): '[' -e '//lib/dracut/hooks/pre-mount/*.sh' ']'
/init@229(): getarg rd.break=mount -d rdbreak=mount
/lib/dracut-lib.sh@173(getarg): debug_off
/lib/dracut-lib.sh@23(debug_off): set +x
/lib/dracut-lib.sh@236(getarg): return 1
/init@232(): _i_mount=0
/init@233(): :
/init@234(): ismounted /sysroot
/lib/dracut-lib.sh@545(ismounted): findmnt /sysroot
/init@238(): for f in "$hookdir"/mount/*.sh
/init@240(): '[' -f /lib/dracut/hooks/mount/000-miso.sh ']'
/init@240(): . /lib/dracut/hooks/mount/000-miso.sh
//lib/dracut/hooks/mount/000-miso.sh@3(): type getarg
//lib/dracut/hooks/mount/000-miso.sh@127(): '[' -n miso:/dev/disk/by-label/GARUDA_HYPRLAND_RAPTOR -a -z '' ']'
//lib/dracut/hooks/mount/000-miso.sh@128(): miso_mount_root
///lib/dracut/hooks/mount/000-miso.sh@65(miso_mount_root): getarg misobasedir=
///lib/dracut-lib.sh@173(getarg): debug_off
///lib/dracut-lib.sh@23(debug_off): set +x
///lib/dracut-lib.sh@228(getarg): return 0
//lib/dracut/hooks/mount/000-miso.sh@65(miso_mount_root): local misobasedir=garuda
///lib/dracut/hooks/mount/000-miso.sh@66(miso_mount_root): getarg overlay_root_size=
///lib/dracut-lib.sh@173(getarg): debug_off
///lib/dracut-lib.sh@23(debug_off): set +x
///lib/dracut-lib.sh@236(getarg): return 1
//lib/dracut/hooks/mount/000-miso.sh@66(miso_mount_root): local overlay_root_size=
///lib/dracut/hooks/mount/000-miso.sh@67(miso_mount_root): uname -m
//lib/dracut/hooks/mount/000-miso.sh@67(miso_mount_root): local arch=x86_64
///lib/dracut/hooks/mount/000-miso.sh@68(miso_mount_root): getarg copytoram=
///lib/dracut-lib.sh@173(getarg): debug_off
///lib/dracut-lib.sh@23(debug_off): set +x
///lib/dracut-lib.sh@236(getarg): return 1
//lib/dracut/hooks/mount/000-miso.sh@68(miso_mount_root): local copytoram=
///lib/dracut/hooks/mount/000-miso.sh@69(miso_mount_root): getarg overlay_root_size=
///lib/dracut-lib.sh@173(getarg): debug_off
///lib/dracut-lib.sh@23(debug_off): set +x
///lib/dracut-lib.sh@236(getarg): return 1
//lib/dracut/hooks/mount/000-miso.sh@69(miso_mount_root): local copytoram_size=
///lib/dracut/hooks/mount/000-miso.sh@70(miso_mount_root): getarg checksum=
///lib/dracut-lib.sh@173(getarg): debug_off
///lib/dracut-lib.sh@23(debug_off): set +x
///lib/dracut-lib.sh@236(getarg): return 1
//lib/dracut/hooks/mount/000-miso.sh@70(miso_mount_root): local checksum=
//lib/dracut/hooks/mount/000-miso.sh@72(miso_mount_root): [[ -z garuda ]]
//lib/dracut/hooks/mount/000-miso.sh@73(miso_mount_root): [[ -z '' ]]
//lib/dracut/hooks/mount/000-miso.sh@73(miso_mount_root): overlay_root_size=75%
//lib/dracut/hooks/mount/000-miso.sh@74(miso_mount_root): [[ -z '' ]]
//lib/dracut/hooks/mount/000-miso.sh@74(miso_mount_root): copytoram_size=75%
//lib/dracut/hooks/mount/000-miso.sh@76(miso_mount_root): mountpoint -q /run/miso/bootmnt
//lib/dracut/hooks/mount/000-miso.sh@77(miso_mount_root): miso_mnt_dev /dev/disk/by-label/GARUDA_HYPRLAND_RAPTOR /run/miso/bootmnt -r defaults
//lib/dracut/hooks/mount/000-miso.sh@7(miso_mnt_dev): local dev=/dev/disk/by-label/GARUDA_HYPRLAND_RAPTOR
//lib/dracut/hooks/mount/000-miso.sh@8(miso_mnt_dev): local mnt=/run/miso/bootmnt
//lib/dracut/hooks/mount/000-miso.sh@9(miso_mnt_dev): local flg=-r
//lib/dracut/hooks/mount/000-miso.sh@10(miso_mnt_dev): local opts=defaults
//lib/dracut/hooks/mount/000-miso.sh@12(miso_mnt_dev): mkdir -p /run/miso/bootmnt
//lib/dracut/hooks/mount/000-miso.sh@14(miso_mnt_dev): echo ':: Mounting '\''/dev/disk/by-label/GARUDA_HYPRLAND_RAPTOR'\'' to '\''/run/miso/bootmnt'\'''
:: Mounting '/dev/disk/by-label/GARUDA_HYPRLAND_RAPTOR' to '/run/miso/bootmnt'
//lib/dracut/hooks/mount/000-miso.sh@16(miso_mnt_dev): mount -o defaults -r /dev/disk/by-label/GARUDA_HYPRLAND_RAPTOR /run/miso/bootmnt
//lib/dracut/hooks/mount/000-miso.sh@17(miso_mnt_dev): echo ':: Device '\''/dev/disk/by-label/GARUDA_HYPRLAND_RAPTOR'\'' mounted successfully.'
:: Device '/dev/disk/by-label/GARUDA_HYPRLAND_RAPTOR' mounted successfully.
//lib/dracut/hooks/mount/000-miso.sh@80(miso_mount_root): [[ '' == \y ]]
//lib/dracut/hooks/mount/000-miso.sh@99(miso_mount_root): [[ '' == \y ]]
//lib/dracut/hooks/mount/000-miso.sh@105(miso_mount_root): mkdir -p /run/miso/overlay_root
//lib/dracut/hooks/mount/000-miso.sh@106(miso_mount_root): mount -t tmpfs -o size=75%,mode=0755 overlay_root /run/miso/overlay_root
//lib/dracut/hooks/mount/000-miso.sh@108(miso_mount_root): local src=/run/miso/bootmnt/garuda/x86_64
//lib/dracut/hooks/mount/000-miso.sh@109(miso_mount_root): local dest_sfs=/run/miso/sfs dest_img=/run/miso/img
//lib/dracut/hooks/mount/000-miso.sh@110(miso_mount_root): local lower_dir
//lib/dracut/hooks/mount/000-miso.sh@112(miso_mount_root): for sfs in livefs mhwdfs desktopfs rootfs
//lib/dracut/hooks/mount/000-miso.sh@113(miso_mount_root): [[ -f /run/miso/bootmnt/garuda/x86_64/livefs.sfs ]]
//lib/dracut/hooks/mount/000-miso.sh@114(miso_mount_root): miso_mnt_sfs /run/miso/bootmnt/garuda/x86_64/livefs.sfs /run/miso/sfs/livefs
//lib/dracut/hooks/mount/000-miso.sh@24(miso_mnt_sfs): local img=/run/miso/bootmnt/garuda/x86_64/livefs.sfs
//lib/dracut/hooks/mount/000-miso.sh@25(miso_mnt_sfs): local mnt=/run/miso/sfs/livefs
//lib/dracut/hooks/mount/000-miso.sh@26(miso_mnt_sfs): local img_fullname=livefs.sfs
//lib/dracut/hooks/mount/000-miso.sh@27(miso_mnt_sfs): local sfs_dev
//lib/dracut/hooks/mount/000-miso.sh@29(miso_mnt_sfs): [[ '' == \y ]]
///lib/dracut/hooks/mount/000-miso.sh@38(miso_mnt_sfs): losetup --find --show --read-only /run/miso/bootmnt/garuda/x86_64/livefs.sfs
//lib/dracut/hooks/mount/000-miso.sh@38(miso_mnt_sfs): sfs_dev=/dev/loop0
//lib/dracut/hooks/mount/000-miso.sh@39(miso_mnt_sfs): miso_mnt_dev /dev/loop0 /run/miso/sfs/livefs -r defaults
//lib/dracut/hooks/mount/000-miso.sh@7(miso_mnt_dev): local dev=/dev/loop0
//lib/dracut/hooks/mount/000-miso.sh@8(miso_mnt_dev): local mnt=/run/miso/sfs/livefs
//lib/dracut/hooks/mount/000-miso.sh@9(miso_mnt_dev): local flg=-r
//lib/dracut/hooks/mount/000-miso.sh@10(miso_mnt_dev): local opts=defaults
//lib/dracut/hooks/mount/000-miso.sh@12(miso_mnt_dev): mkdir -p /run/miso/sfs/livefs
//lib/dracut/hooks/mount/000-miso.sh@14(miso_mnt_dev): echo ':: Mounting '\''/dev/loop0'\'' to '\''/run/miso/sfs/livefs'\'''
:: Mounting '/dev/loop0' to '/run/miso/sfs/livefs'
//lib/dracut/hooks/mount/000-miso.sh@16(miso_mnt_dev): mount -o defaults -r /dev/loop0 /run/miso/sfs/livefs
mount: /run/miso/sfs/livefs: wrong fs type, bad option, bad superblock on /dev/loop0, missing codepage or helper program, or other error.
dmesg(1) may have more information after failed mount system call.
//lib/dracut/hooks/mount/000-miso.sh@19(miso_mnt_dev): die 'Failed to mount '\''/dev/loop0'\'''
//lib/dracut-lib.sh@449(die): echo '<24>dracut: FATAL: Failed to mount '\''/dev/loop0'\'''
//lib/dracut-lib.sh@450(die): echo '<24>dracut: Refusing to continue'
//lib/dracut-lib.sh@454(die): echo 'warn dracut: FATAL: "Failed to mount '\''/dev/loop0'\''"'
//lib/dracut-lib.sh@455(die): echo 'warn dracut: Refusing to continue'
//lib/dracut-lib.sh@457(die): '[' -d /run/initramfs ']'
//lib/dracut-lib.sh@459(die): :
//lib/dracut-lib.sh@461(die): getargbool 0 rd.shell
//lib/dracut-lib.sh@247(getargbool): local _b
//lib/dracut-lib.sh@248(getargbool): unset _b
//lib/dracut-lib.sh@249(getargbool): local _default
//lib/dracut-lib.sh@250(getargbool): _default=0
//lib/dracut-lib.sh@251(getargbool): shift
///lib/dracut-lib.sh@252(getargbool): getarg rd.shell
///lib/dracut-lib.sh@173(getarg): debug_off
///lib/dracut-lib.sh@23(debug_off): set +x
///lib/dracut-lib.sh@236(getarg): return 1
//lib/dracut-lib.sh@252(getargbool): _b=
//lib/dracut-lib.sh@252(getargbool): _b=0
//lib/dracut-lib.sh@253(getargbool): '[' -n 0 ']'
//lib/dracut-lib.sh@254(getargbool): '[' 0 = 0 ']'
//lib/dracut-lib.sh@254(getargbool): return 1
//lib/dracut-lib.sh@464(die): source_hook shutdown-emergency
//lib/dracut-lib.sh@424(source_hook): local _dir
//lib/dracut-lib.sh@425(source_hook): _dir=shutdown-emergency
//lib/dracut-lib.sh@426(source_hook): shift
//lib/dracut-lib.sh@427(source_hook): source_all /lib/dracut/hooks/shutdown-emergency
//lib/dracut-lib.sh@406(source_all): local f
//lib/dracut-lib.sh@407(source_all): local _dir
//lib/dracut-lib.sh@408(source_all): _dir=/lib/dracut/hooks/shutdown-emergency
//lib/dracut-lib.sh@409(source_all): shift
//lib/dracut-lib.sh@410(source_all): '[' /lib/dracut/hooks/shutdown-emergency ']'
//lib/dracut-lib.sh@410(source_all): '[' -d //lib/dracut/hooks/shutdown-emergency ']'
//lib/dracut-lib.sh@411(source_all): for f in "/$_dir"/*.sh
//lib/dracut-lib.sh@412(source_all): '[' -e '//lib/dracut/hooks/shutdown-emergency/*.sh' ']'
//lib/dracut-lib.sh@467(die): '[' -n '' ']'
//lib/dracut-lib.sh@471(die): exit 1
/lib/dracut/hooks/mount/000-miso.sh@1(source): emergency_shell Signal 'caught!'
/lib/dracut-lib.sh@967(emergency_shell): local _ctty
/lib/dracut-lib.sh@968(emergency_shell): set +e
/lib/dracut-lib.sh@969(emergency_shell): local _rdshell_name=dracut action=Boot hook=emergency
/lib/dracut-lib.sh@970(emergency_shell): local _emergency_action
/lib/dracut-lib.sh@972(emergency_shell): '[' Signal = -n ']'
/lib/dracut-lib.sh@975(emergency_shell): '[' Signal = --shutdown ']'
/lib/dracut-lib.sh@987(emergency_shell): echo

/lib/dracut-lib.sh@988(emergency_shell): echo

/lib/dracut-lib.sh@989(emergency_shell): warn 'Signal caught!'
/lib/dracut-lib.sh@69(warn): check_quiet
/lib/dracut-lib.sh@475(check_quiet): '[' -z no ']'
/lib/dracut-lib.sh@70(warn): echo '<28>dracut Warning: Signal caught!'
/lib/dracut-lib.sh@71(warn): echo 'dracut Warning: Signal caught!'
dracut Warning: Signal caught!
/lib/dracut-lib.sh@990(emergency_shell): echo

//lib/dracut-lib.sh@992(emergency_shell): getarg rd.emergency
//lib/dracut-lib.sh@173(getarg): debug_off
//lib/dracut-lib.sh@23(debug_off): set +x
//lib/dracut-lib.sh@236(getarg): return 1
/lib/dracut-lib.sh@992(emergency_shell): _emergency_action=
/lib/dracut-lib.sh@993(emergency_shell): '[' -z '' ']'
/lib/dracut-lib.sh@994(emergency_shell): '[' -e /run/initramfs/.die ']'
/lib/dracut-lib.sh@995(emergency_shell): _emergency_action=halt
/lib/dracut-lib.sh@997(emergency_shell): getargbool 1 rd.shell -d -y rdshell
/lib/dracut-lib.sh@247(getargbool): local _b
/lib/dracut-lib.sh@248(getargbool): unset _b
/lib/dracut-lib.sh@249(getargbool): local _default
/lib/dracut-lib.sh@250(getargbool): _default=1
/lib/dracut-lib.sh@251(getargbool): shift
//lib/dracut-lib.sh@252(getargbool): getarg rd.shell -d -y rdshell
//lib/dracut-lib.sh@173(getarg): debug_off
//lib/dracut-lib.sh@23(debug_off): set +x
//lib/dracut-lib.sh@236(getarg): return 1
/lib/dracut-lib.sh@252(getargbool): _b=
/lib/dracut-lib.sh@252(getargbool): _b=1
/lib/dracut-lib.sh@253(getargbool): '[' -n 1 ']'
/lib/dracut-lib.sh@254(getargbool): '[' 1 = 0 ']'
/lib/dracut-lib.sh@255(getargbool): '[' 1 = no ']'
/lib/dracut-lib.sh@256(getargbool): '[' 1 = off ']'
/lib/dracut-lib.sh@258(getargbool): return 0
/lib/dracut-lib.sh@998(emergency_shell): _emergency_shell dracut
/lib/dracut-lib.sh@926(_emergency_shell): local _name=dracut
/lib/dracut-lib.sh@927(_emergency_shell): '[' -n '' ']'
/lib/dracut-lib.sh@934(_emergency_shell): debug_off
/lib/dracut-lib.sh@23(debug_off): set +x
dracut Warning: dracut: FATAL: Failed to mount '/dev/loop0'
dracut Warning: dracut: Refusing to continue

Generating "/run/initramfs/rdsosreport.txt"