Not a member of Pastebin yet?
Sign Up,
it unlocks many cool features!
- [ 0.000000] Booting Linux on physical CPU 0x0000000000 [0x410fd033]
- [ 0.000000] Linux version 4.14.0-next-20171116-dirty (naresh.kamboju@hackbox.linaro.org) (gcc version 5.3.1 20160113 (Linaro GCC 5.3-2016.02)) #31 SMP PREEMPT Thu Nov
- 16 16:03:06 GMT 2017
- [ 0.000000] Machine model: HiKey Development Board
- [ 0.000000] efi: Getting EFI parameters from FDT:
- [ 0.000000] efi: EFI v2.60 by EDK II
- [ 0.000000] efi: MEMATTR=0x3cb14a98
- [ 0.000000] Reserved memory: created CMA memory pool at 0x0000000078000000, size 128 MiB
- [ 0.000000] OF: reserved mem: initialized node linux,cma, compatible id shared-dma-pool
- [ 0.000000] NUMA: No NUMA configuration found
- [ 0.000000] NUMA: Faking a node at [mem 0x0000000000000000-0x000000007fffffff]
- [ 0.000000] NUMA: NODE_DATA [mem 0x77fbb800-0x77fbd47f]
- [ 0.000000] Zone ranges:
- [ 0.000000] DMA [mem 0x0000000000000000-0x000000007fffffff]
- [ 0.000000] Normal empty
- [ 0.000000] Movable zone start for each node
- [ 0.000000] Early memory node ranges
- [ 0.000000] node 0: [mem 0x0000000000000000-0x0000000005dfffff]
- [ 0.000000] node 0: [mem 0x0000000005f00000-0x0000000005f00fff]
- [ 0.000000] node 0: [mem 0x0000000005f02000-0x0000000006dfefff]
- [ 0.000000] node 0: [mem 0x0000000006e00000-0x000000000740efff]
- [ 0.000000] node 0: [mem 0x0000000007410000-0x0000000021efffff]
- [ 0.000000] node 0: [mem 0x0000000022000000-0x0000000034ffffff]
- [ 0.000000] node 0: [mem 0x00000000350f0000-0x00000000384dffff]
- [ 0.000000] node 0: [mem 0x00000000384e0000-0x000000003871ffff]
- [ 0.000000] node 0: [mem 0x0000000038720000-0x0000000038727fff]
- [ 0.000000] node 0: [mem 0x0000000038728000-0x000000003872bfff]
- [ 0.000000] node 0: [mem 0x000000003872c000-0x000000003d6effff]
- [ 0.000000] node 0: [mem 0x000000003d6f0000-0x000000003d72ffff]
- [ 0.000000] node 0: [mem 0x000000003d730000-0x000000003d73ffff]
- [ 0.000000] node 0: [mem 0x000000003d740000-0x000000003d78ffff]
- [ 0.000000] node 0: [mem 0x000000003d790000-0x000000003dffffff]
- [ 0.000000] node 0: [mem 0x0000000040000000-0x000000007fffffff]
- [ 0.000000] Initmem setup node 0 [mem 0x0000000000000000-0x000000007fffffff]
- [ 0.000000] Reserved but unavailable: 256 pages
- [ 0.000000] psci: probing for conduit method from DT.
- [ 0.000000] psci: PSCIv1.1 detected in firmware.
- [ 0.000000] psci: Using standard PSCI v0.2 function IDs
- [ 0.000000] psci: Trusted OS migration not required
- [ 0.000000] random: fast init done
- [ 0.000000] percpu: Embedded 26 pages/cpu @ffff800077ee4000 s66048 r8192 d32256 u106496
- [ 0.000000] Detected VIPT I-cache on CPU0
- [ 0.000000] CPU features: enabling workaround for ARM erratum 845719
- [ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 507149
- [ 0.000000] Policy zone: DMA
- [ 0.000000] Kernel command line: BOOT_IMAGE=/boot/Image console=tty0 console=ttyAMA3,115200n8 root=/dev/mmcblk0p9 rootwait rw efi=noruntime
- [ 0.000000] Memory: 1859156K/2061364K available (11516K kernel code, 1844K rwdata, 5124K rodata, 1280K init, 12428K bss, 71136K reserved, 131072K cma-reserved)
- [ 0.000000] Virtual kernel memory layout:
- [ 0.000000] modules : 0xffff000000000000 - 0xffff000008000000 ( 128 MB)
- [ 0.000000] vmalloc : 0xffff000008000000 - 0xffff7dffbfff0000 (129022 GB)
- [ 0.000000] .text : 0xffff000008080000 - 0xffff000008bc0000 ( 11520 KB)
- [ 0.000000] .rodata : 0xffff000008bc0000 - 0xffff0000090d0000 ( 5184 KB)
- [ 0.000000] .init : 0xffff0000090d0000 - 0xffff000009210000 ( 1280 KB)
- [ 0.000000] .data : 0xffff000009210000 - 0xffff0000093dd200 ( 1845 KB)
- [ 0.000000] .bss : 0xffff0000093dd200 - 0xffff00000a0005f8 ( 12429 KB)
- [ 0.000000] fixed : 0xffff7dfffe7fb000 - 0xffff7dfffec00000 ( 4116 KB)
- [ 0.000000] PCI I/O : 0xffff7dfffee00000 - 0xffff7dffffe00000 ( 16 MB)
- [ 0.000000] vmemmap : 0xffff7e0000000000 - 0xffff800000000000 ( 2048 GB maximum)
- [ 0.000000] 0xffff7e0000000000 - 0xffff7e0002000000 ( 32 MB actual)
- [ 0.000000] memory : 0xffff800000000000 - 0xffff800080000000 ( 2048 MB)
- [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=1
- [ 0.000000] Running RCU self tests
- [ 0.000000] Preemptible hierarchical RCU implementation.
- [ 0.000000] RCU lockdep checking is enabled.
- [ 0.000000] RCU restricting CPUs from NR_CPUS=64 to nr_cpu_ids=8.
- [ 0.000000] Tasks RCU enabled.
- [ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=8
- [ 0.000000] NR_IRQS: 64, nr_irqs: 64, preallocated irqs: 0
- [ 0.000000] GIC: Using split EOI/Deactivate mode
- [ 0.000000] arch_timer: cp15 timer(s) running at 1.20MHz (phys).
- [ 0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x11b661f8e, max_idle_ns: 1763180809113 ns
- [ 0.000005] sched_clock: 56 bits at 1200kHz, resolution 833ns, wraps every 4398046510838ns
- [ 0.000180] clocksource: arm,sp804: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 99544814920 ns
- [ 0.000194] sched_clock: 32 bits at 19MHz, resolution 52ns, wraps every 111848106981ns
- [ 0.000773] Console: colour dummy device 80x25
- [ 0.004369] console [tty0] enabled
- [ 0.004416] Lock dependency validator: Copyright (c) 2006 Red Hat, Inc., Ingo Molnar
- [ 0.004482] ... MAX_LOCKDEP_SUBCLASSES: 8
- [ 0.004521] ... MAX_LOCK_DEPTH: 48
- [ 0.004560] ... MAX_LOCKDEP_KEYS: 8191
- [ 0.004601] ... CLASSHASH_SIZE: 4096
- [ 0.004641] ... MAX_LOCKDEP_ENTRIES: 32768
- [ 0.004683] ... MAX_LOCKDEP_CHAINS: 65536
- [ 0.004724] ... CHAINHASH_SIZE: 32768
- [ 0.004765] memory used by lock dependency info: 7391 kB
- [ 0.004812] per task-struct memory footprint: 2304 bytes
- [ 0.004949] Calibrating delay loop (skipped), value calculated using timer frequency.. 2.40 BogoMIPS (lpj=4800)
- [ 0.005041] pid_max: default: 32768 minimum: 301
- [ 0.005261] Security Framework initialized
- [ 0.006076] Dentry cache hash table entries: 262144 (order: 9, 2097152 bytes)
- [ 0.006512] Inode-cache hash table entries: 131072 (order: 8, 1048576 bytes)
- [ 0.006627] Mount-cache hash table entries: 4096 (order: 3, 32768 bytes)
- [ 0.006701] Mountpoint-cache hash table entries: 4096 (order: 3, 32768 bytes)
- [ 0.024254] ASID allocator initialised with 65536 entries
- [ 0.032242] Hierarchical SRCU implementation.
- [ 0.041474] EFI runtime services will be disabled.
- [ 0.048369] smp: Bringing up secondary CPUs ...
- [ 0.076795] Detected VIPT I-cache on CPU1
- [ 0.076872] CPU1: Booted secondary processor 0x0000000001 [0x410fd033]
- [ 0.104915] Detected VIPT I-cache on CPU2
- [ 0.104977] CPU2: Booted secondary processor 0x0000000002 [0x410fd033]
- [ 0.133077] Detected VIPT I-cache on CPU3
- [ 0.133130] CPU3: Booted secondary processor 0x0000000003 [0x410fd033]
- [ 0.161292] Detected VIPT I-cache on CPU4
- [ 0.161358] CPU4: Booted secondary processor 0x0000000100 [0x410fd033]
- [ 0.189399] Detected VIPT I-cache on CPU5
- [ 0.189437] CPU5: Booted secondary processor 0x0000000101 [0x410fd033]
- [ 0.217568] Detected VIPT I-cache on CPU6
- [ 0.217603] CPU6: Booted secondary processor 0x0000000102 [0x410fd033]
- [ 0.245753] Detected VIPT I-cache on CPU7
- [ 0.245789] CPU7: Booted secondary processor 0x0000000103 [0x410fd033]
- [ 0.246075] smp: Brought up 1 node, 8 CPUs
- [ 0.246804] SMP: Total of 8 processors activated.
- [ 0.246858] CPU features: detected feature: 32-bit EL0 Support
- [ 0.247956] CPU: All CPU(s) started at EL2
- [ 0.248151] alternatives: patching kernel code
- [ 0.250263] devtmpfs: initialized
- [ 0.278745] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns
- [ 0.278959] futex hash table entries: 2048 (order: 6, 262144 bytes)
- [ 0.283848] pinctrl core: initialized pinctrl subsystem
- [ 0.287131] DMI not present or invalid.
- [ 0.288304] NET: Registered protocol family 16
- [ 0.289512] audit: initializing netlink subsys (disabled)
- [ 0.290031] audit: type=2000 audit(0.288:1): state=initialized audit_enabled=0 res=1
- [ 0.293010] cpuidle: using governor menu
- [ 0.294076] vdso: 2 pages (1 code @ ffff000008bc6000, 1 data @ ffff000009215000)
- [ 0.294175] hw-breakpoint: found 6 breakpoint and 4 watchpoint registers.
- [ 0.297686] DMA: preallocated 256 KiB pool for atomic allocations
- [ 0.299469] Serial: AMBA PL011 UART driver
- [ 0.304826] f8015000.uart: ttyAMA0 at MMIO 0xf8015000 (irq = 7, base_baud = 0) is a PL011 rev2
- [ 0.307237] uart-pl011 f7111000.uart: could not find pctldev for node /soc/pinmux@f7010000/uart1_pmx_func, deferring probe
- [ 0.307872] uart-pl011 f7112000.uart: could not find pctldev for node /soc/pinmux@f7010000/uart2_pmx_func, deferring probe
- [ 0.308460] uart-pl011 f7113000.uart: could not find pctldev for node /soc/pinmux@f7010000/uart3_pmx_func, deferring probe
- [ 0.323804] hi6220-mbox f7510000.mailbox: Mailbox enabled
- [ 0.360596] HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages
- [ 0.363760] ACPI: Interpreter disabled.
- [ 0.365878] VDD_3V3: supplied by SYS_5V
- [ 0.367980] vgaarb: loaded
- [ 0.368824] SCSI subsystem initialized
- [ 0.369528] ssp-pl022 f7106000.spi: could not find pctldev for node /soc/pinmux@f7010000/spi0_pmx_func, deferring probe
- [ 0.370403] usbcore: registered new interface driver usbfs
- [ 0.370610] usbcore: registered new interface driver hub
- [ 0.370984] usbcore: registered new device driver usb
- [ 0.371733] i2c_designware f7100000.i2c: could not find pctldev for node /soc/pinmux@f7010000/i2c0_pmx_func, deferring probe
- [ 0.371919] i2c_designware f7101000.i2c: could not find pctldev for node /soc/pinmux@f7010000/i2c1_pmx_func, deferring probe
- [ 0.372078] i2c_designware f7102000.i2c: could not find pctldev for node /soc/pinmux@f7010000/i2c2_pmx_func, deferring probe
- [ 0.373049] pps_core: LinuxPPS API ver. 1 registered
- [ 0.373108] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
- [ 0.373258] PTP clock support registered
- [ 0.373599] EDAC MC: Ver: 3.0.0
- [ 0.374758] Registered efivars operations
- [ 0.375533] Advanced Linux Sound Architecture Driver Initialized.
- [ 0.377869] clocksource: Switched to clocksource arch_sys_counter
- [ 0.507934] VFS: Disk quotas dquot_6.6.0
- [ 0.508089] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
- [ 0.508590] pnp: PnP ACPI: disabled
- [ 0.528009] NET: Registered protocol family 2
- [ 0.529277] TCP established hash table entries: 16384 (order: 5, 131072 bytes)
- [ 0.529806] TCP bind hash table entries: 16384 (order: 8, 1179648 bytes)
- [ 0.532926] TCP: Hash tables configured (established 16384 bind 16384)
- [ 0.533571] UDP hash table entries: 1024 (order: 5, 163840 bytes)
- [ 0.534154] UDP-Lite hash table entries: 1024 (order: 5, 163840 bytes)
- [ 0.535173] NET: Registered protocol family 1
- [ 0.536427] RPC: Registered named UNIX socket transport module.
- [ 0.536501] RPC: Registered udp transport module.
- [ 0.536554] RPC: Registered tcp transport module.
- [ 0.536606] RPC: Registered tcp NFSv4.1 backchannel transport module.
- [ 0.538670] kvm [1]: 8-bit VMID
- [ 0.538720] kvm [1]: IDMAP page: bb5000
- [ 0.538765] kvm [1]: HYP VA range: 800000000000:ffffffffffff
- [ 0.545951] kvm [1]: vgic-v2@f6804000
- [ 0.546475] kvm [1]: vgic interrupt IRQ1
- [ 0.546544] kvm [1]: virtual timer IRQ4
- [ 0.546989] kvm [1]: Hyp mode initialized successfully
- [ 0.556921] Initialise system trusted keyrings
- [ 0.557413] workingset: timestamp_bits=44 max_order=19 bucket_order=0
- [ 0.583709] squashfs: version 4.0 (2009/01/31) Phillip Lougher
- [ 0.585901] NFS: Registering the id_resolver key type
- [ 0.586055] Key type id_resolver registered
- [ 0.586111] Key type id_legacy registered
- [ 0.586177] nfs4filelayout_init: NFSv4 File Layout Driver Registering...
- [ 0.586674] 9p: Installing v9fs 9p2000 file system support
- [ 0.593308] Key type asymmetric registered
- [ 0.593435] Asymmetric key parser 'x509' registered
- [ 0.593974] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 245)
- [ 0.594110] io scheduler noop registered
- [ 0.594491] io scheduler cfq registered (default)
- [ 0.594546] io scheduler mq-deadline registered
- [ 0.594598] io scheduler kyber registered
- [ 0.595049] test_firmware: interface ready
- [ 0.603374] pinctrl-single f7010000.pinmux: 159 pins at pa ffff00000a415000 size 636
- [ 0.604811] pinctrl-single f7010800.pinmux: 163 pins at pa ffff00000a41d800 size 652
- [ 0.605783] pinctrl-single f8001800.pinmux: 30 pins at pa ffff00000a425800 size 120
- [ 0.610802] pl061_gpio f8011000.gpio: PL061 GPIO chip @0x00000000f8011000 registered
- [ 0.611647] pl061_gpio f8012000.gpio: PL061 GPIO chip @0x00000000f8012000 registered
- [ 0.612422] pl061_gpio f8013000.gpio: PL061 GPIO chip @0x00000000f8013000 registered
- [ 0.612867] pl061_gpio f8014000.gpio: names 9 do not match number of GPIOs 8
- [ 0.613391] pl061_gpio f8014000.gpio: PL061 GPIO chip @0x00000000f8014000 registered
- [ 0.614212] pl061_gpio f7020000.gpio: PL061 GPIO chip @0x00000000f7020000 registered
- [ 0.615013] pl061_gpio f7021000.gpio: PL061 GPIO chip @0x00000000f7021000 registered
- [ 0.615804] pl061_gpio f7022000.gpio: PL061 GPIO chip @0x00000000f7022000 registered
- [ 0.616564] pl061_gpio f7023000.gpio: PL061 GPIO chip @0x00000000f7023000 registered
- [ 0.616900] pl061_gpio f7024000.gpio: names 9 do not match number of GPIOs 8
- [ 0.617434] pl061_gpio f7024000.gpio: PL061 GPIO chip @0x00000000f7024000 registered
- [ 0.618284] pl061_gpio f7025000.gpio: PL061 GPIO chip @0x00000000f7025000 registered
- [ 0.619074] pl061_gpio f7026000.gpio: PL061 GPIO chip @0x00000000f7026000 registered
- [ 0.619919] pl061_gpio f7027000.gpio: PL061 GPIO chip @0x00000000f7027000 registered
- [ 0.620703] pl061_gpio f7028000.gpio: PL061 GPIO chip @0x00000000f7028000 registered
- [ 0.621470] pl061_gpio f7029000.gpio: PL061 GPIO chip @0x00000000f7029000 registered
- [ 0.622328] pl061_gpio f702a000.gpio: PL061 GPIO chip @0x00000000f702a000 registered
- [ 0.623135] pl061_gpio f702b000.gpio: PL061 GPIO chip @0x00000000f702b000 registered
- [ 0.623905] pl061_gpio f702c000.gpio: PL061 GPIO chip @0x00000000f702c000 registered
- [ 0.624665] pl061_gpio f702d000.gpio: PL061 GPIO chip @0x00000000f702d000 registered
- [ 0.625512] pl061_gpio f702e000.gpio: PL061 GPIO chip @0x00000000f702e000 registered
- [ 0.626359] pl061_gpio f702f000.gpio: PL061 GPIO chip @0x00000000f702f000 registered
- [ 0.640605] k3-dma f7370000.dma: initialized
- [ 0.653803] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
- [ 0.659250] SuperH (H)SCI(F) driver initialized
- [ 0.659932] msm_serial: driver initialized
- [ 0.689884] loop: module loaded
- [ 0.705722] libphy: Fixed MDIO Bus: probed
- [ 0.708451] e1000e: Intel(R) PRO/1000 Network Driver - 3.2.6-k
- [ 0.708533] e1000e: Copyright(c) 1999 - 2015 Intel Corporation.
- [ 0.708708] igb: Intel(R) Gigabit Ethernet Network Driver - version 5.4.0-k
- [ 0.708781] igb: Copyright (c) 2007-2014 Intel Corporation.
- [ 0.708942] igbvf: Intel(R) Gigabit Virtual Function Network Driver - version 2.4.0-k
- [ 0.709024] igbvf: Copyright (c) 2009 - 2012 Intel Corporation.
- [ 0.709715] sky2: driver version 1.30
- [ 0.711015] VFIO - User Level meta-driver version: 0.3
- [ 0.713982] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
- [ 0.714067] ehci-pci: EHCI PCI platform driver
- [ 0.714205] ehci-platform: EHCI generic platform driver
- [ 0.714489] ehci-orion: EHCI orion driver
- [ 0.714713] ehci-exynos: EHCI EXYNOS driver
- [ 0.714929] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
- [ 0.715038] ohci-pci: OHCI PCI platform driver
- [ 0.715176] ohci-platform: OHCI generic platform driver
- [ 0.715409] ohci-exynos: OHCI EXYNOS driver
- [ 0.716244] usbcore: registered new interface driver usb-storage
- [ 0.720159] input: HISI 65xx PowerOn Key as /devices/platform/f8000000.pmic/hi65xx-powerkey.0.auto/input/input0
- [ 0.723229] rtc-pl031 f8003000.rtc: rtc core: registered pl031 as rtc0
- [ 0.724191] rtc-pl031 f8004000.rtc: rtc core: registered pl031 as rtc1
- [ 0.725510] i2c /dev entries driver
- [ 0.739946] sdhci: Secure Digital Host Controller Interface driver
- [ 0.740032] sdhci: Copyright(c) Pierre Ossman
- [ 0.740467] Synopsys Designware Multimedia Card Interface Driver
- [ 0.741708] dwmmc_k3 f723d000.dwmmc0: fifo-depth property not found, using value of FIFOTH register as default
- [ 0.742128] dwmmc_k3 f723d000.dwmmc0: IDMAC supports 32-bit address mode.
- [ 0.743324] dwmmc_k3 f723d000.dwmmc0: Using internal DMA controller.
- [ 0.743399] dwmmc_k3 f723d000.dwmmc0: Version ID is 250a
- [ 0.743550] dwmmc_k3 f723d000.dwmmc0: DW MMC controller at irq 41,32 bit host data width,256 deep fifo
- [ 0.744040] mmc_host mmc0: card is non-removable.
- [ 0.761948] mmc_host mmc0: Bus speed (slot 0) = 24800000Hz (slot req 400000Hz, actual 400000HZ div = 31)
- [ 0.783218] dwmmc_k3 f723e000.dwmmc1: fifo-depth property not found, using value of FIFOTH register as default
- [ 0.783910] dwmmc_k3 f723e000.dwmmc1: IDMAC supports 32-bit address mode.
- [ 0.788066] dwmmc_k3 f723e000.dwmmc1: Using internal DMA controller.
- [ 0.788147] dwmmc_k3 f723e000.dwmmc1: Version ID is 250a
- [ 0.788295] dwmmc_k3 f723e000.dwmmc1: DW MMC controller at irq 42,32 bit host data width,128 deep fifo
- [ 0.789001] dwmmc_k3 f723e000.dwmmc1: Got CD GPIO
- [ 0.806085] mmc_host mmc1: Bus speed (slot 0) = 24800000Hz (slot req 400000Hz, actual 400000HZ div = 31)
- [ 0.828335] dwmmc_k3 f723f000.dwmmc2: fifo-depth property not found, using value of FIFOTH register as default
- [ 0.828741] dwmmc_k3 f723f000.dwmmc2: IDMAC supports 32-bit address mode.
- [ 0.830062] dwmmc_k3 f723f000.dwmmc2: Using internal DMA controller.
- [ 0.830137] dwmmc_k3 f723f000.dwmmc2: Version ID is 250a
- [ 0.830277] dwmmc_k3 f723f000.dwmmc2: DW MMC controller at irq 43,32 bit host data width,128 deep fifo
- [ 0.832585] sdhci-pltfm: SDHCI platform and OF driver helper
- [ 0.837785] ledtrig-cpu: registered to indicate activity on CPUs
- [ 0.839959] usbcore: registered new interface driver usbhid
- [ 0.840040] usbhid: USB HID core driver
- [ 0.842183] optee: probing for conduit method from DT.
- [ 0.843674] optee: initialized driver
- [ 0.848838] NET: Registered protocol family 10
- [ 0.851730] Segment Routing with IPv6
- [ 0.851883] sit: IPv6, IPv4 and MPLS over IPv4 tunneling driver
- [ 0.853291] NET: Registered protocol family 17
- [ 0.853537] 9pnet: Installing 9P2000 support
- [ 0.853746] Key type dns_resolver registered
- [ 0.859940] mmc_host mmc0: Bus speed (slot 0) = 51756522Hz (slot req 52000000Hz, actual 51756522HZ div = 0)
- [ 0.865707] registered taskstats version 1
- [ 0.865769] Loading compiled-in X.509 certificates
- [ 0.866983] mmc0: new high speed MMC card at address 0001
- [ 0.868857] mmcblk0: mmc0:0001 H8G1e 7.28 GiB
- [ 0.869346] mmcblk0boot0: mmc0:0001 H8G1e partition 1 4.00 MiB
- [ 0.869813] mmcblk0boot1: mmc0:0001 H8G1e partition 2 4.00 MiB
- [ 0.870865] mmcblk0rpmb: mmc0:0001 H8G1e partition 3 4.00 MiB, chardev (240:0)
- [ 0.877974] mmcblk0: p1 p2 p3 p4 p5 p6 p7 p8 p9
- [ 0.888063] f7111000.uart: ttyAMA1 at MMIO 0xf7111000 (irq = 8, base_baud = 0) is a PL011 rev2
- [ 0.888715] serial serial0: tty port ttyAMA1 registered
- [ 0.889559] f7112000.uart: ttyAMA2 at MMIO 0xf7112000 (irq = 9, base_baud = 0) is a PL011 rev2
- [ 0.891836] f7113000.uart: ttyAMA3 at MMIO 0xf7113000 (irq = 10, base_baud = 0) is a PL011 rev2
- [ 2.651439] console [ttyAMA3] enabled
- [ 2.657075] 5V_HUB: supplied by SYS_5V
- [ 2.662234] ssp-pl022 f7106000.spi: ARM PL022 driver, device ID: 0x00041022
- [ 2.669521] ssp-pl022 f7106000.spi: mapped registers from 0x00000000f7106000 to ffff00000a57d000
- [ 2.678677] ssp-pl022 f7106000.spi: setup for DMA on RX dma0chan0, TX dma0chan1
- [ 2.696877] dwc2 f72c0000.usb: f72c0000.usb supply vusb_d not found, using dummy regulator
- [ 2.705486] dwc2 f72c0000.usb: f72c0000.usb supply vusb_a not found, using dummy regulator
- [ 3.086021] dwc2 f72c0000.usb: dwc2_check_param_tx_fifo_sizes: Invalid parameter g_tx_fifo_size[1]=128
- [ 3.095483] dwc2 f72c0000.usb: dwc2_check_param_tx_fifo_sizes: Invalid parameter g_tx_fifo_size[2]=128
- [ 3.104912] dwc2 f72c0000.usb: dwc2_check_param_tx_fifo_sizes: Invalid parameter g_tx_fifo_size[3]=128
- [ 3.114341] dwc2 f72c0000.usb: dwc2_check_param_tx_fifo_sizes: Invalid parameter g_tx_fifo_size[4]=128
- [ 3.123768] dwc2 f72c0000.usb: dwc2_check_param_tx_fifo_sizes: Invalid parameter g_tx_fifo_size[5]=128
- [ 3.133196] dwc2 f72c0000.usb: dwc2_check_param_tx_fifo_sizes: Invalid parameter g_tx_fifo_size[6]=128
- [ 3.142623] dwc2 f72c0000.usb: dwc2_check_param_tx_fifo_sizes: Invalid parameter g_tx_fifo_size[7]=128
- [ 3.152050] dwc2 f72c0000.usb: dwc2_check_param_tx_fifo_sizes: Invalid parameter g_tx_fifo_size[8]=128
- [ 3.161477] dwc2 f72c0000.usb: dwc2_check_param_tx_fifo_sizes: Invalid parameter g_tx_fifo_size[9]=16
- [ 3.170817] dwc2 f72c0000.usb: dwc2_check_param_tx_fifo_sizes: Invalid parameter g_tx_fifo_size[10]=16
- [ 3.180243] dwc2 f72c0000.usb: dwc2_check_param_tx_fifo_sizes: Invalid parameter g_tx_fifo_size[11]=16
- [ 3.189670] dwc2 f72c0000.usb: dwc2_check_param_tx_fifo_sizes: Invalid parameter g_tx_fifo_size[12]=16
- [ 3.199097] dwc2 f72c0000.usb: dwc2_check_param_tx_fifo_sizes: Invalid parameter g_tx_fifo_size[13]=16
- [ 3.208524] dwc2 f72c0000.usb: dwc2_check_param_tx_fifo_sizes: Invalid parameter g_tx_fifo_size[14]=16
- [ 3.217951] dwc2 f72c0000.usb: dwc2_check_param_tx_fifo_sizes: Invalid parameter g_tx_fifo_size[15]=16
- [ 3.227487] dwc2 f72c0000.usb: EPs: 16, dedicated fifos, 1920 entries in SPRAM
- [ 3.238298] dwc2 f72c0000.usb: DWC OTG Controller
- [ 3.243324] dwc2 f72c0000.usb: new USB bus registered, assigned bus number 1
- [ 3.250643] dwc2 f72c0000.usb: irq 39, io mem 0xf72c0000
- [ 3.259227] hub 1-0:1.0: USB hub found
- [ 3.263286] hub 1-0:1.0: 1 port detected
- [ 3.273607] dwmmc_k3 f723f000.dwmmc2: fifo-depth property not found, using value of FIFOTH register as default
- [ 3.283963] dwmmc_k3 f723f000.dwmmc2: IDMAC supports 32-bit address mode.
- [ 3.291294] dwmmc_k3 f723f000.dwmmc2: Using internal DMA controller.
- [ 3.297762] dwmmc_k3 f723f000.dwmmc2: Version ID is 250a
- [ 3.303221] dwmmc_k3 f723f000.dwmmc2: DW MMC controller at irq 43,32 bit host data width,128 deep fifo
- [ 3.315442] rtc-pl031 f8003000.rtc: setting system clock to 1970-01-01 00:00:14 UTC (14)
- [ 3.328887] LDO2_2V8: disabling
- [ 3.332199] LDO7_SDIO: disabling
- [ 3.335522] LDO10_2V85: disabling
- [ 3.338920] LDO13_1V8: disabling
- [ 3.342236] LDO14_2V8: disabling
- [ 3.345508] LDO17_2V5: disabling
- [ 3.348818] ALSA device list:
- [ 3.351862] No soundcards found.
- [ 3.356690] uart-pl011 f7113000.uart: no DMA platform data
- Minicom2.7Minico[ 3.366274] EXT4-fs (mmcblk0p9): couldn't mount as ext3 due to feature incompatibilities
- [ 3.389325] EXT4-fs (mmcblk0p9): mounted filesystem with ordered data mode. Opts: (null)
- [ 3.397774] VFS: Mounted root (ext4 filesystem) on device 179:9.
- [ 3.410368] devtmpfs: mounted
- [ 3.414492] Freeing unused kernel memory: 1280K
- [ 3.654125] systemd[1]: System time before build time, advancing clock.
- [ 3.666055] dwc2 f72c0000.usb: Set speed to high-speed
- [ 3.671394] usb 1-1: new high-speed USB device number 2 using dwc2
- [ 3.738259] systemd[1]: systemd 230 running in system mode. (+PAM -AUDIT -SELINUX +IMA -APPARMOR +SMACK +SYSVINIT +UTMP -LIBCRYPTSETUP -GCRYPT +GNUTLS +ACL +XZ -LZ4 -
- SECCOMP +BLKID -ELFUTILS +KMOD -IDN)
- [ 3.757764] systemd[1]: Detected architecture arm64.
- Welcome to Reference-Platform-Build-X11 2.2+linaro!
- [ 3.784116] systemd[1]: Set hostname to <hikey>.
- [ 3.866158] dwc2 f72c0000.usb: Set speed to high-speed
- [ 3.893470] hub 1-1:1.0: USB hub found
- [ 3.897642] hub 1-1:1.0: 3 ports detected
- [ 3.910364] dwmmc_k3 f723f000.dwmmc2: fifo-depth property not found, using value of FIFOTH register as default
- [ 3.920718] dwmmc_k3 f723f000.dwmmc2: IDMAC supports 32-bit address mode.
- [ 3.929322] dwmmc_k3 f723f000.dwmmc2: Using internal DMA controller.
- [ 3.935827] dwmmc_k3 f723f000.dwmmc2: Version ID is 250a
- [ 3.941281] dwmmc_k3 f723f000.dwmmc2: DW MMC controller at irq 43,32 bit host data width,128 deep fifo
- [ 4.082137] systemd[1]: Started Forward Password Requests to Wall Directory Watch.
- [ OK ] Started Forward Password Requests to Wall Directory Watch.
- [ 4.106821] systemd[1]: Listening on Journal Socket.
- [ OK ] Listening on Journal Socket.
- [ 4.126342] systemd[1]: Reached target Swap.
- [ OK ] Reached target Swap.
- [ 4.142217] systemd[1]: Reached target Remote File Systems.
- [ OK ] Reached target Remote File Systems.
- [ 4.162852] systemd[1]: Listening on /dev/initctl Compatibility Named Pipe.
- [ OK ] Listening on /dev/initctl Compatibility Named Pipe.
- [ 4.189908] dwc2 f72c0000.usb: Set speed to full-speed
- [ 4.191645] systemd[1]: Created slice System Slice.
- [ 4.200537] usb 1-1.1: new full-speed USB device number 3 using dwc2
- [ OK ] Created slice System Slice.
- [ 4.228120] systemd[1]: Starting Create list of required static device nodes for the current kernel...
- Starting Create list of required st... nodes for the current kernel...
- Starting Setup Virtual Console...
- [ OK ] Listening on Syslog Socket.
- [ OK ] Listening on udev Kernel Socket.
- [ OK ] Listening on Network Service Netlink Socket.
- [ OK ] Created slice system-serial\x2dgetty.slice.
- Starting Remount Root and Kernel File Systems...
- [ OK ] Listening on Journal Audit Socket.
- [ 4.366814] EXT4-fs (mmcblk0p9): re-mounted. Opts: (null)
- Starting Load Kernel Modules...
- Mounting Huge Pages File System...
- [ 4.417796] fuse init (API version 7.26)
- [ OK ] Listening on Journal Socket (/dev/log).
- Starting Journal Service...
- Mounting Temporary Directory...
- Mounting Debug File System...
- [ OK ] Started Dispatch Password Requests to Console Directory Watch.
- [ OK ] Reached target Paths.
- [ OK ] Created slice User and Session Slice.
- [ OK ] Reached target Slices.
- [ OK ] Created slice system-getty.slice.
- Mounting POSIX Message Queue File System...
- [ OK ] Listening on udev Control Socket.
- [ 4.622385] usb 1-1: USB disconnect, device number 2
- [ OK ] Mounted Debug File System.
- [ OK ] Mounted POSIX Message Queue File System.
- [ OK ] Mounted Huge Pages File System.
- [ OK ] Mounted Temporary Directory.
- [ OK ] Started Journal Service.
- [ OK ] Started Create list of required sta...ce nodes for the current kernel.
- [ OK ] Started Setup Virtual Console.
- [ OK ] Started Remount Root and Kernel File Systems.
- [ OK ] Started Load Kernel Modules.
- Starting Apply Kernel Variables...
- Mounting Configuration File System...
- Mounting FUSE Control File System...
- Starting udev Coldplug all Devices...
- Starting Create Static Device Nodes in /dev...
- Starting Flush Journal to Persistent Storage...
- [ OK ] Mounted FUSE Control File System.
- [ OK ] Mounted Configuration File System.
- [ OK ] Started Apply Kernel Variables.
- [ OK ] Started Create Static Device Nodes in /dev.
- [ OK ] Reached target Local File Systems (Pre).
- Mounting /var/volatile...
- Starting udev Kernel Device Manager...
- [ OK ] Mounted /var/volatile.
- [ 5.131398] systemd-journald[1601]: Received request to flush runtime journal from PID 1
- Starting Load/Save Random Seed...
- [ OK ] Reached target Local File Systems.
- [ OK ] Started udev Kernel Device Manager.
- [ OK ] Started Flush Journal to Persistent Storage.
- [ OK ] Started Load/Save Random Seed.
- Starting Create Volatile Files and Directories...
- [ OK ] Started Create Volatile Files and Directories.
- Starting Update UTMP about System Boot/Shutdown...
- Starting Network Time Synchronization...
- [ OK ] Started Update UTMP about System Boot/Shutdown.
- [ OK ] Started Network Time Synchronization.
- [ OK ] Reached target System Time Synchronized.
- [ OK ] Started udev Coldplug all Devices.
- [ OK ] Reached target System Initialization.
- [ OK ] Listening on Avahi mDNS/DNS-SD Stack Activation Socket.
- [ OK ] Started Daily Cleanup of Temporary Directories.
- [ 5.917458] adv7511 2-0039: 2-0039 supply avdd not found, using dummy regulator
- [ 5.918211] dwmmc_k3 f723f000.dwmmc2: fifo-depth property not found, using value of FIFOTH register as default
- [ 5.918404] dwmmc_k3 f723f000.dwmmc2: IDMAC supports 32-bit address mode.
- [ 5.936101] dwmmc_k3 f723f000.dwmmc2: Using internal DMA controller.
- [ 5.936117] dwmmc_k3 f723f000.dwmmc2: Version ID is 250a
- [ 5.936176] dwmmc_k3 f723f000.dwmmc2: DW MMC controller at irq 43,32 bit host data width,128 deep fifo
- [ 5.954804] Bluetooth: Core ver 2.22
- [ 5.954998] NET: Registered protocol family 31
- [ 5.955003] Bluetooth: HCI device and connection manager initialized
- [ 5.955318] Bluetooth: HCI socket layer initialized
- [ 5.955335] Bluetooth: L2CAP socket layer initialized
- [ 5.955553] Bluetooth: SCO socket layer initialized
- [ 5.994559] Bluetooth: HCI UART driver ver 2.3
- [[ 5.994625] adv7511 2-0039: 2-0039 supply dvdd not found, using dummy regulator
- OK ][ 5.994770] adv7511 2-0039: 2-0039 supply pvdd not found, using dummy regulator
- Reached target [ 5.994915] adv7511 2-0039: 2-0039 supply a2vdd not found, using dummy regulator
- Timers.
- [ 5.995057] adv7511 2-0039: 2-0039 supply v3p3 not found, using dummy regulator
- [ 5.995291] adv7511 2-0039: 2-0039 supply v1p2 not found, using dummy regulator
- [ 6.011083] dwmmc_k3 f723f000.dwmmc2: fifo-depth property not found, using value of FIFOTH register as default
- [ 6.011272] dwmmc_k3 f723f000.dwmmc2: IDMAC supports 32-bit address mode.
- [ 6.026988] adv7511: probe of 2-0039 failed with error -2
- [ 6.032743] dwmmc_k3 f723f000.dwmmc2: Using internal DMA controller.
- [ 6.032759] dwmmc_k3 f723f000.dwmmc2: Version ID is 250a
- [ 6.032815] dwmmc_k3 f723f000.dwmmc2: DW MMC controller at irq 43,32 bit host data width,128 deep fifo
- [ 6.086605] Bluetooth: HCI UART protocol LL registered
- [ OK ] Listening on RPCbind Server Activation Socket.
- Starting sshd.socket.
- [ OK ] Listening on D-Bus System Message Bus Socket.
- [ OK ] Listening on sshd.socket.
- [ OK ] Found device /dev/ttyAMA2.
- [ OK ] Found device /dev/ttyAMA3.
- [ OK ] Listening on Load/Save RF Kill Switch Status /dev/rfkill Watch.
- [ OK ] Reached target Sockets.
- [ OK ] Reached target Basic System.
- [ OK ] Started Periodic Command Scheduler.
- Starting Avahi mDNS/DNS-SD Stack...
- [ OK ] Started Kernel Logging Service.
- [ OK ] Started System Logging Service.
- [ OK ] Started D-Bus System Message Bus.
- [ OK ] Started Avahi mDNS/DNS-SD Stack.
- Starting Network Service...
- Starting Login Service...
- [ OK ] Started Job spooling tools.
- [ OK ] Started TEE Supplicant.
- Starting Network Manager...
- [ OK ] Started Login Service.
- [ OK ] Started Network Service.
- [ OK ] Started Network Manager.
- [ OK ] Reached target Network.
- Starting Network Name Resolution...
- Starting Permit User Sessions...
- Starting DNS forwarder and DHCP server...
- [ OK ] Started Network Name Resolution.
- [ OK ] Started Permit User Sessions.
- Starting Authorization Manager...
- [ OK ] Started Serial Getty on ttyAMA2.
- [ OK ] Started Getty on tty1.
- [ OK ] Started Serial Getty on ttyAMA3.
- [ OK ] Reached target Login Prompts.
- [ OK ] Started DNS forwarder and DHCP server.
- [ OK ] Reached target Multi-User System.
- Starting Update UTMP about System Runlevel Changes...
- [ OK ] Started Update UTMP about System Runlevel Changes.
- [ OK ] Started Authorization Manager.
- [ 7.370543] uart-pl011 f7112000.uart: no DMA platform data
- Reference-Platform-Build-X11 2.2+linaro hikey ttyAMA3
- hikey login: [ 9.786037] dwc2 f72c0000.usb: Set speed to full-speed
- [ 9.791301] usb 1-1: new full-speed USB device number 7 using dwc2
- [ 9.982127] dwc2 f72c0000.usb: Set speed to full-speed
- [ 10.007284] usb 1-1: not running at top speed; connect to a high speed hub
- [ 10.016885] hub 1-1:1.0: USB hub found
- [ 10.021624] hub 1-1:1.0: 3 ports detected
- [ 10.032715] dwmmc_k3 f723f000.dwmmc2: fifo-depth property not found, using value of FIFOTH register as default
- [ 10.043076] dwmmc_k3 f723f000.dwmmc2: IDMAC supports 32-bit address mode.
- [ 10.051619] dwmmc_k3 f723f000.dwmmc2: Using internal DMA controller.
- [ 10.058133] dwmmc_k3 f723f000.dwmmc2: Version ID is 250a
- [ 10.063610] dwmmc_k3 f723f000.dwmmc2: DW MMC controller at irq 43,32 bit host data width,128 deep fifo
- [ 10.314014] dwc2 f72c0000.usb: Set speed to full-speed
- [ 10.319307] usb 1-1.1: new full-speed USB device number 8 using dwc2
- [ 10.405908] dwc2 f72c0000.usb: Set speed to full-speed
- [ 10.441958] dwmmc_k3 f723f000.dwmmc2: fifo-depth property not found, using value of FIFOTH register as default
- [ 10.452376] dwmmc_k3 f723f000.dwmmc2: IDMAC supports 32-bit address mode.
- [ 10.464524] dwmmc_k3 f723f000.dwmmc2: Using internal DMA controller.
- [ 10.471109] dwmmc_k3 f723f000.dwmmc2: Version ID is 250a
- [ 10.476656] dwmmc_k3 f723f000.dwmmc2: DW MMC controller at irq 43,32 bit host data width,128 deep fifo
- [ 10.520039] dm9601 1-1.1:1.0 eth0: register 'dm9601' at usb-f72c0000.usb-1.1, Davicom DM96xx USB 10/100 Ethernet, 00:10:13:50:a4:90
- [ 10.534912] usbcore: registered new interface driver dm9601
- [ 10.535471] dwmmc_k3 f723f000.dwmmc2: fifo-depth property not found, using value of FIFOTH register as default
- [ 10.535665] dwmmc_k3 f723f000.dwmmc2: IDMAC supports 32-bit address mode.
- [ 10.551225] dwmmc_k3 f723f000.dwmmc2: Using internal DMA controller.
- [ 10.551238] dwmmc_k3 f723f000.dwmmc2: Version ID is 250a
- [ 10.551294] dwmmc_k3 f723f000.dwmmc2: DW MMC controller at irq 43,32 bit host data width,128 deep fifo
- [ 10.626318] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
- [ 10.642564] dm9601 1-1.1:1.0 eth0: link down
- [ 10.663787] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
- [ 12.109651] dm9601 1-1.1:1.0 eth0: kevent 4 may have been dropped
- [ 12.115990] dm9601 1-1.1:1.0 eth0: kevent 4 may have been dropped
- [ 12.123340] dm9601 1-1.1:1.0 eth0: kevent 4 may have been dropped
- [ 12.132212] dm9601 1-1.1:1.0 eth0: kevent 4 may have been dropped
- [ 12.140318] dm9601 1-1.1:1.0 eth0: kevent 4 may have been dropped
- [ 12.146634] dm9601 1-1.1:1.0 eth0: kevent 4 may have been dropped
- [ 12.157439] dm9601 1-1.1:1.0 eth0: kevent 4 may have been dropped
- [ 12.165316] dm9601 1-1.1:1.0 eth0: kevent 4 may have been dropped
- [ 12.171654] dm9601 1-1.1:1.0 eth0: kevent 4 may have been dropped
- [ 12.182509] dm9601 1-1.1:1.0 eth0: kevent 4 may have been dropped
- [ 12.189527] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
- [ 12.207415] dm9601 1-1.1:1.0 eth0: link up, 100Mbps, full-duplex, lpa 0xCDE1
- [ 12.288541] dm9601 1-1.1:1.0 eth0: link up, 100Mbps, full-duplex, lpa 0xCDE1
- [ 12.335548] dm9601 1-1.1:1.0 eth0: link up, 100Mbps, full-duplex, lpa 0xCDE1
- [ 12.382390] dm9601 1-1.1:1.0 eth0: link up, 100Mbps, full-duplex, lpa 0xCDE1
- [ 12.452409] dm9601 1-1.1:1.0 eth0: link up, 100Mbps, full-duplex, lpa 0xCDE1
- [ 12.499791] dm9601 1-1.1:1.0 eth0: link up, 100Mbps, full-duplex, lpa 0xCDE1
- [ 12.902849] random: crng init done
- [ 13.264477] dm9601 1-1.1:1.0 eth0: link up, 100Mbps, full-duplex, lpa 0xCDE1
- [ 13.311398] dm9601 1-1.1:1.0 eth0: link up, 100Mbps, full-duplex, lpa 0xCDE1
- [ 13.358550] dm9601 1-1.1:1.0 eth0: link up, 100Mbps, full-duplex, lpa 0xCDE1
- [ 13.405547] dm9601 1-1.1:1.0 eth0: link up, 100Mbps, full-duplex, lpa 0xCDE1
- [ 13.452398] dm9601 1-1.1:1.0 eth0: link up, 100Mbps, full-duplex, lpa 0xCDE1
- [ 13.499543] dm9601 1-1.1:1.0 eth0: link up, 100Mbps, full-duplex, lpa 0xCDE1
- Reference-Platform-Build-X11 2.2+linaro hikey ttyAMA3
- hikey login: linaro
- [ 17.365307] audit: type=1006 audit(1510849290.391:2): pid=2824 uid=0 old-auid=4294967295 auid=1000 tty=(none) old-ses=4294967295 ses=1 res=1
- shikey:~$ 0;169Ru
- -sh: 0: command not found
- -sh: 169Ru: command not found
- hikey:~$ su
- hikey:/home/linaro# lsmod
- Module Size Used by
- dm9601 16384 0
- usbnet 36864 1 dm9601
- crc32_ce 16384 0
- crct10dif_ce 16384 0
- hci_uart 32768 0
- bluetooth 393216 1 hci_uart
- ecdh_generic 24576 1 bluetooth
- rfkill 32768 2 bluetooth
- adv7511 28672 0
- dw_drm_dsi 20480 0
- cec 49152 1 adv7511
- kirin_drm 24576 0
- drm_kms_helper 188416 2 adv7511,kirin_drm
- drm 450560 4 dw_drm_dsi,adv7511,kirin_drm,drm_kms_helper
- fuse 106496 1
- hikey:/home/linaro# cat /proc/version
- Linux version 4.14.0-next-20171116-dirty (naresh.kamboju@hackbox.linaro.org) (gcc version 5.3.1 20160113 (Linaro GCC 5.3-2016.02)) #31 SMP PREEMPT Thu Nov 16 16:03:06 GM
- T 2017
- hikey:/home/linaro#
- hikey:/home/linaro#
- hikey:/home/linaro# dmesg
- [ 0.000000] Booting Linux on physical CPU 0x0000000000 [0x410fd033]
- [ 0.000000] Linux version 4.14.0-next-20171116-dirty (naresh.kamboju@hackbox.linaro.org) (gcc version 5.3.1 20160113 (Linaro GCC 5.3-2016.02)) #31 SMP PREEMPT Thu Nov
- 16 16:03:06 GMT 2017
- [ 0.000000] Machine model: HiKey Development Board
- [ 0.000000] efi: Getting EFI parameters from FDT:
- [ 0.000000] efi: EFI v2.60 by EDK II
- [ 0.000000] efi: MEMATTR=0x3cb14a98
- [ 0.000000] Reserved memory: created CMA memory pool at 0x0000000078000000, size 128 MiB
- [ 0.000000] OF: reserved mem: initialized node linux,cma, compatible id shared-dma-pool
- [ 0.000000] NUMA: No NUMA configuration found
- [ 0.000000] NUMA: Faking a node at [mem 0x0000000000000000-0x000000007fffffff]
- [ 0.000000] NUMA: NODE_DATA [mem 0x77fbb800-0x77fbd47f]
- [ 0.000000] Zone ranges:
- [ 0.000000] DMA [mem 0x0000000000000000-0x000000007fffffff]
- [ 0.000000] Normal empty
- [ 0.000000] Movable zone start for each node
- [ 0.000000] Early memory node ranges
- [ 0.000000] node 0: [mem 0x0000000000000000-0x0000000005dfffff]
- [ 0.000000] node 0: [mem 0x0000000005f00000-0x0000000005f00fff]
- [ 0.000000] node 0: [mem 0x0000000005f02000-0x0000000006dfefff]
- [ 0.000000] node 0: [mem 0x0000000006e00000-0x000000000740efff]
- [ 0.000000] node 0: [mem 0x0000000007410000-0x0000000021efffff]
- [ 0.000000] node 0: [mem 0x0000000022000000-0x0000000034ffffff]
- [ 0.000000] node 0: [mem 0x00000000350f0000-0x00000000384dffff]
- [ 0.000000] node 0: [mem 0x00000000384e0000-0x000000003871ffff]
- [ 0.000000] node 0: [mem 0x0000000038720000-0x0000000038727fff]
- [ 0.000000] node 0: [mem 0x0000000038728000-0x000000003872bfff]
- [ 0.000000] node 0: [mem 0x000000003872c000-0x000000003d6effff]
- [ 0.000000] node 0: [mem 0x000000003d6f0000-0x000000003d72ffff]
- [ 0.000000] node 0: [mem 0x000000003d730000-0x000000003d73ffff]
- [ 0.000000] node 0: [mem 0x000000003d740000-0x000000003d78ffff]
- [ 0.000000] node 0: [mem 0x000000003d790000-0x000000003dffffff]
- [ 0.000000] node 0: [mem 0x0000000040000000-0x000000007fffffff]
- [ 0.000000] Initmem setup node 0 [mem 0x0000000000000000-0x000000007fffffff]
- [ 0.000000] On node 0 totalpages: 515341
- [ 0.000000] DMA zone: 8192 pages used for memmap
- [ 0.000000] DMA zone: 0 pages reserved
- [ 0.000000] DMA zone: 515341 pages, LIFO batch:31
- [ 0.000000] Reserved but unavailable: 256 pages
- [ 0.000000] psci: probing for conduit method from DT.
- [ 0.000000] psci: PSCIv1.1 detected in firmware.
- [ 0.000000] psci: Using standard PSCI v0.2 function IDs
- [ 0.000000] psci: Trusted OS migration not required
- [ 0.000000] random: fast init done
- [ 0.000000] percpu: Embedded 26 pages/cpu @ffff800077ee4000 s66048 r8192 d32256 u106496
- [ 0.000000] pcpu-alloc: s66048 r8192 d32256 u106496 alloc=26*4096
- [ 0.000000] pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3 [0] 4 [0] 5 [0] 6 [0] 7
- [ 0.000000] Detected VIPT I-cache on CPU0
- [ 0.000000] CPU features: enabling workaround for ARM erratum 845719
- [ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 507149
- [ 0.000000] Policy zone: DMA
- [ 0.000000] Kernel command line: BOOT_IMAGE=/boot/Image console=tty0 console=ttyAMA3,115200n8 root=/dev/mmcblk0p9 rootwait rw efi=noruntime
- [ 0.000000] Memory: 1859156K/2061364K available (11516K kernel code, 1844K rwdata, 5124K rodata, 1280K init, 12428K bss, 71136K reserved, 131072K cma-reserved)
- [ 0.000000] Virtual kernel memory layout:
- [ 0.000000] modules : 0xffff000000000000 - 0xffff000008000000 ( 128 MB)
- [ 0.000000] vmalloc : 0xffff000008000000 - 0xffff7dffbfff0000 (129022 GB)
- [ 0.000000] .text : 0xffff000008080000 - 0xffff000008bc0000 ( 11520 KB)
- [ 0.000000] .rodata : 0xffff000008bc0000 - 0xffff0000090d0000 ( 5184 KB)
- [ 0.000000] .init : 0xffff0000090d0000 - 0xffff000009210000 ( 1280 KB)
- [ 0.000000] .data : 0xffff000009210000 - 0xffff0000093dd200 ( 1845 KB)
- [ 0.000000] .bss : 0xffff0000093dd200 - 0xffff00000a0005f8 ( 12429 KB)
- [ 0.000000] fixed : 0xffff7dfffe7fb000 - 0xffff7dfffec00000 ( 4116 KB)
- [ 0.000000] PCI I/O : 0xffff7dfffee00000 - 0xffff7dffffe00000 ( 16 MB)
- [ 0.000000] vmemmap : 0xffff7e0000000000 - 0xffff800000000000 ( 2048 GB maximum)
- [ 0.000000] 0xffff7e0000000000 - 0xffff7e0002000000 ( 32 MB actual)
- [ 0.000000] memory : 0xffff800000000000 - 0xffff800080000000 ( 2048 MB)
- [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=1
- [ 0.000000] Running RCU self tests
- [ 0.000000] Preemptible hierarchical RCU implementation.
- [ 0.000000] RCU lockdep checking is enabled.
- [ 0.000000] RCU restricting CPUs from NR_CPUS=64 to nr_cpu_ids=8.
- [ 0.000000] Tasks RCU enabled.
- [ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=8
- [ 0.000000] NR_IRQS: 64, nr_irqs: 64, preallocated irqs: 0
- [ 0.000000] GIC: Using split EOI/Deactivate mode
- [ 0.000000] arch_timer: cp15 timer(s) running at 1.20MHz (phys).
- [ 0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x11b661f8e, max_idle_ns: 1763180809113 ns
- [ 0.000005] sched_clock: 56 bits at 1200kHz, resolution 833ns, wraps every 4398046510838ns
- [ 0.000180] clocksource: arm,sp804: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 99544814920 ns
- [ 0.000194] sched_clock: 32 bits at 19MHz, resolution 52ns, wraps every 111848106981ns
- [ 0.000773] Console: colour dummy device 80x25
- [ 0.004369] console [tty0] enabled
- [ 0.004416] Lock dependency validator: Copyright (c) 2006 Red Hat, Inc., Ingo Molnar
- [ 0.004482] ... MAX_LOCKDEP_SUBCLASSES: 8
- [ 0.004521] ... MAX_LOCK_DEPTH: 48
- [ 0.004560] ... MAX_LOCKDEP_KEYS: 8191
- [ 0.004601] ... CLASSHASH_SIZE: 4096
- [ 0.004641] ... MAX_LOCKDEP_ENTRIES: 32768
- [ 0.004683] ... MAX_LOCKDEP_CHAINS: 65536
- [ 0.004724] ... CHAINHASH_SIZE: 32768
- [ 0.004765] memory used by lock dependency info: 7391 kB
- [ 0.004812] per task-struct memory footprint: 2304 bytes
- [ 0.004949] Calibrating delay loop (skipped), value calculated using timer frequency.. 2.40 BogoMIPS (lpj=4800)
- [ 0.005041] pid_max: default: 32768 minimum: 301
- [ 0.005261] Security Framework initialized
- [ 0.006076] Dentry cache hash table entries: 262144 (order: 9, 2097152 bytes)
- [ 0.006512] Inode-cache hash table entries: 131072 (order: 8, 1048576 bytes)
- [ 0.006627] Mount-cache hash table entries: 4096 (order: 3, 32768 bytes)
- [ 0.006701] Mountpoint-cache hash table entries: 4096 (order: 3, 32768 bytes)
- [ 0.024254] ASID allocator initialised with 65536 entries
- [ 0.032242] Hierarchical SRCU implementation.
- [ 0.041474] EFI runtime services will be disabled.
- [ 0.048369] smp: Bringing up secondary CPUs ...
- [ 0.076795] Detected VIPT I-cache on CPU1
- [ 0.076872] CPU1: Booted secondary processor 0x0000000001 [0x410fd033]
- [ 0.104915] Detected VIPT I-cache on CPU2
- [ 0.104977] CPU2: Booted secondary processor 0x0000000002 [0x410fd033]
- [ 0.133077] Detected VIPT I-cache on CPU3
- [ 0.133130] CPU3: Booted secondary processor 0x0000000003 [0x410fd033]
- [ 0.161292] Detected VIPT I-cache on CPU4
- [ 0.161358] CPU4: Booted secondary processor 0x0000000100 [0x410fd033]
- [ 0.189399] Detected VIPT I-cache on CPU5
- [ 0.189437] CPU5: Booted secondary processor 0x0000000101 [0x410fd033]
- [ 0.217568] Detected VIPT I-cache on CPU6
- [ 0.217603] CPU6: Booted secondary processor 0x0000000102 [0x410fd033]
- [ 0.245753] Detected VIPT I-cache on CPU7
- [ 0.245789] CPU7: Booted secondary processor 0x0000000103 [0x410fd033]
- [ 0.246075] smp: Brought up 1 node, 8 CPUs
- [ 0.246804] SMP: Total of 8 processors activated.
- [ 0.246858] CPU features: detected feature: 32-bit EL0 Support
- [ 0.247956] CPU: All CPU(s) started at EL2
- [ 0.248151] alternatives: patching kernel code
- [ 0.250263] devtmpfs: initialized
- [ 0.278745] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns
- [ 0.278959] futex hash table entries: 2048 (order: 6, 262144 bytes)
- [ 0.283848] pinctrl core: initialized pinctrl subsystem
- [ 0.287131] DMI not present or invalid.
- [ 0.288304] NET: Registered protocol family 16
- [ 0.289512] audit: initializing netlink subsys (disabled)
- [ 0.290031] audit: type=2000 audit(0.288:1): state=initialized audit_enabled=0 res=1
- [ 0.293010] cpuidle: using governor menu
- [ 0.294076] vdso: 2 pages (1 code @ ffff000008bc6000, 1 data @ ffff000009215000)
- [ 0.294175] hw-breakpoint: found 6 breakpoint and 4 watchpoint registers.
- [ 0.297686] DMA: preallocated 256 KiB pool for atomic allocations
- [ 0.299469] Serial: AMBA PL011 UART driver
- [ 0.304826] f8015000.uart: ttyAMA0 at MMIO 0xf8015000 (irq = 7, base_baud = 0) is a PL011 rev2
- [ 0.307237] uart-pl011 f7111000.uart: could not find pctldev for node /soc/pinmux@f7010000/uart1_pmx_func, deferring probe
- [ 0.307872] uart-pl011 f7112000.uart: could not find pctldev for node /soc/pinmux@f7010000/uart2_pmx_func, deferring probe
- [ 0.308460] uart-pl011 f7113000.uart: could not find pctldev for node /soc/pinmux@f7010000/uart3_pmx_func, deferring probe
- [ 0.323804] hi6220-mbox f7510000.mailbox: Mailbox enabled
- [ 0.360596] HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages
- [ 0.363760] ACPI: Interpreter disabled.
- [ 0.365878] VDD_3V3: supplied by SYS_5V
- [ 0.367980] vgaarb: loaded
- [ 0.368824] SCSI subsystem initialized
- [ 0.369388] libata version 3.00 loaded.
- [ 0.369528] ssp-pl022 f7106000.spi: could not find pctldev for node /soc/pinmux@f7010000/spi0_pmx_func, deferring probe
- [ 0.370403] usbcore: registered new interface driver usbfs
- [ 0.370610] usbcore: registered new interface driver hub
- [ 0.370984] usbcore: registered new device driver usb
- [ 0.371733] i2c_designware f7100000.i2c: could not find pctldev for node /soc/pinmux@f7010000/i2c0_pmx_func, deferring probe
- [ 0.371919] i2c_designware f7101000.i2c: could not find pctldev for node /soc/pinmux@f7010000/i2c1_pmx_func, deferring probe
- [ 0.372078] i2c_designware f7102000.i2c: could not find pctldev for node /soc/pinmux@f7010000/i2c2_pmx_func, deferring probe
- [ 0.373049] pps_core: LinuxPPS API ver. 1 registered
- [ 0.373108] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
- [ 0.373258] PTP clock support registered
- [ 0.373599] EDAC MC: Ver: 3.0.0
- [ 0.374758] Registered efivars operations
- [ 0.375533] Advanced Linux Sound Architecture Driver Initialized.
- [ 0.377869] clocksource: Switched to clocksource arch_sys_counter
- [ 0.507934] VFS: Disk quotas dquot_6.6.0
- [ 0.508089] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
- [ 0.508590] pnp: PnP ACPI: disabled
- [ 0.528009] NET: Registered protocol family 2
- [ 0.529277] TCP established hash table entries: 16384 (order: 5, 131072 bytes)
- [ 0.529806] TCP bind hash table entries: 16384 (order: 8, 1179648 bytes)
- [ 0.532926] TCP: Hash tables configured (established 16384 bind 16384)
- [ 0.533571] UDP hash table entries: 1024 (order: 5, 163840 bytes)
- [ 0.534154] UDP-Lite hash table entries: 1024 (order: 5, 163840 bytes)
- [ 0.535173] NET: Registered protocol family 1
- [ 0.536427] RPC: Registered named UNIX socket transport module.
- [ 0.536501] RPC: Registered udp transport module.
- [ 0.536554] RPC: Registered tcp transport module.
- [ 0.536606] RPC: Registered tcp NFSv4.1 backchannel transport module.
- [ 0.536679] PCI: CLS 0 bytes, default 128
- [ 0.538670] kvm [1]: 8-bit VMID
- [ 0.538720] kvm [1]: IDMAP page: bb5000
- [ 0.538765] kvm [1]: HYP VA range: 800000000000:ffffffffffff
- [ 0.545951] kvm [1]: vgic-v2@f6804000
- [ 0.546475] kvm [1]: vgic interrupt IRQ1
- [ 0.546544] kvm [1]: virtual timer IRQ4
- [ 0.546989] kvm [1]: Hyp mode initialized successfully
- [ 0.556921] Initialise system trusted keyrings
- [ 0.557413] workingset: timestamp_bits=44 max_order=19 bucket_order=0
- [ 0.583709] squashfs: version 4.0 (2009/01/31) Phillip Lougher
- [ 0.585901] NFS: Registering the id_resolver key type
- [ 0.586055] Key type id_resolver registered
- [ 0.586111] Key type id_legacy registered
- [ 0.586177] nfs4filelayout_init: NFSv4 File Layout Driver Registering...
- [ 0.586674] 9p: Installing v9fs 9p2000 file system support
- [ 0.593308] Key type asymmetric registered
- [ 0.593435] Asymmetric key parser 'x509' registered
- [ 0.593974] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 245)
- [ 0.594110] io scheduler noop registered
- [ 0.594491] io scheduler cfq registered (default)
- [ 0.594546] io scheduler mq-deadline registered
- [ 0.594598] io scheduler kyber registered
- [ 0.595049] test_firmware: interface ready
- [ 0.603374] pinctrl-single f7010000.pinmux: 159 pins at pa ffff00000a415000 size 636
- [ 0.604811] pinctrl-single f7010800.pinmux: 163 pins at pa ffff00000a41d800 size 652
- [ 0.605783] pinctrl-single f8001800.pinmux: 30 pins at pa ffff00000a425800 size 120
- [ 0.610802] pl061_gpio f8011000.gpio: PL061 GPIO chip @0x00000000f8011000 registered
- [ 0.611647] pl061_gpio f8012000.gpio: PL061 GPIO chip @0x00000000f8012000 registered
- [ 0.612422] pl061_gpio f8013000.gpio: PL061 GPIO chip @0x00000000f8013000 registered
- [ 0.612867] pl061_gpio f8014000.gpio: names 9 do not match number of GPIOs 8
- [ 0.613391] pl061_gpio f8014000.gpio: PL061 GPIO chip @0x00000000f8014000 registered
- [ 0.614212] pl061_gpio f7020000.gpio: PL061 GPIO chip @0x00000000f7020000 registered
- [ 0.615013] pl061_gpio f7021000.gpio: PL061 GPIO chip @0x00000000f7021000 registered
- [ 0.615804] pl061_gpio f7022000.gpio: PL061 GPIO chip @0x00000000f7022000 registered
- [ 0.616564] pl061_gpio f7023000.gpio: PL061 GPIO chip @0x00000000f7023000 registered
- [ 0.616900] pl061_gpio f7024000.gpio: names 9 do not match number of GPIOs 8
- [ 0.617434] pl061_gpio f7024000.gpio: PL061 GPIO chip @0x00000000f7024000 registered
- [ 0.618284] pl061_gpio f7025000.gpio: PL061 GPIO chip @0x00000000f7025000 registered
- [ 0.619074] pl061_gpio f7026000.gpio: PL061 GPIO chip @0x00000000f7026000 registered
- [ 0.619919] pl061_gpio f7027000.gpio: PL061 GPIO chip @0x00000000f7027000 registered
- [ 0.620703] pl061_gpio f7028000.gpio: PL061 GPIO chip @0x00000000f7028000 registered
- [ 0.621470] pl061_gpio f7029000.gpio: PL061 GPIO chip @0x00000000f7029000 registered
- [ 0.622328] pl061_gpio f702a000.gpio: PL061 GPIO chip @0x00000000f702a000 registered
- [ 0.623135] pl061_gpio f702b000.gpio: PL061 GPIO chip @0x00000000f702b000 registered
- [ 0.623905] pl061_gpio f702c000.gpio: PL061 GPIO chip @0x00000000f702c000 registered
- [ 0.624665] pl061_gpio f702d000.gpio: PL061 GPIO chip @0x00000000f702d000 registered
- [ 0.625512] pl061_gpio f702e000.gpio: PL061 GPIO chip @0x00000000f702e000 registered
- [ 0.626359] pl061_gpio f702f000.gpio: PL061 GPIO chip @0x00000000f702f000 registered
- [ 0.640605] k3-dma f7370000.dma: initialized
- [ 0.653803] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
- [ 0.659250] SuperH (H)SCI(F) driver initialized
- [ 0.659932] msm_serial: driver initialized
- [ 0.689884] loop: module loaded
- [ 0.705722] libphy: Fixed MDIO Bus: probed
- [ 0.708451] e1000e: Intel(R) PRO/1000 Network Driver - 3.2.6-k
- [ 0.708533] e1000e: Copyright(c) 1999 - 2015 Intel Corporation.
- [ 0.708708] igb: Intel(R) Gigabit Ethernet Network Driver - version 5.4.0-k
- [ 0.708781] igb: Copyright (c) 2007-2014 Intel Corporation.
- [ 0.708942] igbvf: Intel(R) Gigabit Virtual Function Network Driver - version 2.4.0-k
- [ 0.709024] igbvf: Copyright (c) 2009 - 2012 Intel Corporation.
- [ 0.709715] sky2: driver version 1.30
- [ 0.711015] VFIO - User Level meta-driver version: 0.3
- [ 0.713982] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
- [ 0.714067] ehci-pci: EHCI PCI platform driver
- [ 0.714205] ehci-platform: EHCI generic platform driver
- [ 0.714489] ehci-orion: EHCI orion driver
- [ 0.714713] ehci-exynos: EHCI EXYNOS driver
- [ 0.714929] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
- [ 0.715038] ohci-pci: OHCI PCI platform driver
- [ 0.715176] ohci-platform: OHCI generic platform driver
- [ 0.715409] ohci-exynos: OHCI EXYNOS driver
- [ 0.716244] usbcore: registered new interface driver usb-storage
- [ 0.720159] input: HISI 65xx PowerOn Key as /devices/platform/f8000000.pmic/hi65xx-powerkey.0.auto/input/input0
- [ 0.723229] rtc-pl031 f8003000.rtc: rtc core: registered pl031 as rtc0
- [ 0.724191] rtc-pl031 f8004000.rtc: rtc core: registered pl031 as rtc1
- [ 0.725510] i2c /dev entries driver
- [ 0.739946] sdhci: Secure Digital Host Controller Interface driver
- [ 0.740032] sdhci: Copyright(c) Pierre Ossman
- [ 0.740467] Synopsys Designware Multimedia Card Interface Driver
- [ 0.741708] dwmmc_k3 f723d000.dwmmc0: fifo-depth property not found, using value of FIFOTH register as default
- [ 0.742128] dwmmc_k3 f723d000.dwmmc0: IDMAC supports 32-bit address mode.
- [ 0.743324] dwmmc_k3 f723d000.dwmmc0: Using internal DMA controller.
- [ 0.743399] dwmmc_k3 f723d000.dwmmc0: Version ID is 250a
- [ 0.743550] dwmmc_k3 f723d000.dwmmc0: DW MMC controller at irq 41,32 bit host data width,256 deep fifo
- [ 0.744040] mmc_host mmc0: card is non-removable.
- [ 0.761948] mmc_host mmc0: Bus speed (slot 0) = 24800000Hz (slot req 400000Hz, actual 400000HZ div = 31)
- [ 0.783218] dwmmc_k3 f723e000.dwmmc1: fifo-depth property not found, using value of FIFOTH register as default
- [ 0.783910] dwmmc_k3 f723e000.dwmmc1: IDMAC supports 32-bit address mode.
- [ 0.788066] dwmmc_k3 f723e000.dwmmc1: Using internal DMA controller.
- [ 0.788147] dwmmc_k3 f723e000.dwmmc1: Version ID is 250a
- [ 0.788295] dwmmc_k3 f723e000.dwmmc1: DW MMC controller at irq 42,32 bit host data width,128 deep fifo
- [ 0.789001] dwmmc_k3 f723e000.dwmmc1: Got CD GPIO
- [ 0.806085] mmc_host mmc1: Bus speed (slot 0) = 24800000Hz (slot req 400000Hz, actual 400000HZ div = 31)
- [ 0.828335] dwmmc_k3 f723f000.dwmmc2: fifo-depth property not found, using value of FIFOTH register as default
- [ 0.828741] dwmmc_k3 f723f000.dwmmc2: IDMAC supports 32-bit address mode.
- [ 0.830062] dwmmc_k3 f723f000.dwmmc2: Using internal DMA controller.
- [ 0.830137] dwmmc_k3 f723f000.dwmmc2: Version ID is 250a
- [ 0.830277] dwmmc_k3 f723f000.dwmmc2: DW MMC controller at irq 43,32 bit host data width,128 deep fifo
- [ 0.832585] sdhci-pltfm: SDHCI platform and OF driver helper
- [ 0.837785] ledtrig-cpu: registered to indicate activity on CPUs
- [ 0.839959] usbcore: registered new interface driver usbhid
- [ 0.840040] usbhid: USB HID core driver
- [ 0.842183] optee: probing for conduit method from DT.
- [ 0.843674] optee: initialized driver
- [ 0.848838] NET: Registered protocol family 10
- [ 0.851730] Segment Routing with IPv6
- [ 0.851883] sit: IPv6, IPv4 and MPLS over IPv4 tunneling driver
- [ 0.853291] NET: Registered protocol family 17
- [ 0.853537] 9pnet: Installing 9P2000 support
- [ 0.853746] Key type dns_resolver registered
- [ 0.853799] start plist test
- [ 0.859940] mmc_host mmc0: Bus speed (slot 0) = 51756522Hz (slot req 52000000Hz, actual 51756522HZ div = 0)
- [ 0.863342] end plist test
- [ 0.865707] registered taskstats version 1
- [ 0.865769] Loading compiled-in X.509 certificates
- [ 0.866983] mmc0: new high speed MMC card at address 0001
- [ 0.868857] mmcblk0: mmc0:0001 H8G1e 7.28 GiB
- [ 0.869346] mmcblk0boot0: mmc0:0001 H8G1e partition 1 4.00 MiB
- [ 0.869813] mmcblk0boot1: mmc0:0001 H8G1e partition 2 4.00 MiB
- [ 0.870865] mmcblk0rpmb: mmc0:0001 H8G1e partition 3 4.00 MiB, chardev (240:0)
- [ 0.877974] mmcblk0: p1 p2 p3 p4 p5 p6 p7 p8 p9
- [ 0.888063] f7111000.uart: ttyAMA1 at MMIO 0xf7111000 (irq = 8, base_baud = 0) is a PL011 rev2
- [ 0.888715] serial serial0: tty port ttyAMA1 registered
- [ 0.889559] f7112000.uart: ttyAMA2 at MMIO 0xf7112000 (irq = 9, base_baud = 0) is a PL011 rev2
- [ 0.891836] f7113000.uart: ttyAMA3 at MMIO 0xf7113000 (irq = 10, base_baud = 0) is a PL011 rev2
- [ 2.651439] console [ttyAMA3] enabled
- [ 2.657075] 5V_HUB: supplied by SYS_5V
- [ 2.662234] ssp-pl022 f7106000.spi: ARM PL022 driver, device ID: 0x00041022
- [ 2.669521] ssp-pl022 f7106000.spi: mapped registers from 0x00000000f7106000 to ffff00000a57d000
- [ 2.678677] ssp-pl022 f7106000.spi: setup for DMA on RX dma0chan0, TX dma0chan1
- [ 2.696877] dwc2 f72c0000.usb: f72c0000.usb supply vusb_d not found, using dummy regulator
- [ 2.705486] dwc2 f72c0000.usb: f72c0000.usb supply vusb_a not found, using dummy regulator
- [ 3.086021] dwc2 f72c0000.usb: dwc2_check_param_tx_fifo_sizes: Invalid parameter g_tx_fifo_size[1]=128
- [ 3.095483] dwc2 f72c0000.usb: dwc2_check_param_tx_fifo_sizes: Invalid parameter g_tx_fifo_size[2]=128
- [ 3.104912] dwc2 f72c0000.usb: dwc2_check_param_tx_fifo_sizes: Invalid parameter g_tx_fifo_size[3]=128
- [ 3.114341] dwc2 f72c0000.usb: dwc2_check_param_tx_fifo_sizes: Invalid parameter g_tx_fifo_size[4]=128
- [ 3.123768] dwc2 f72c0000.usb: dwc2_check_param_tx_fifo_sizes: Invalid parameter g_tx_fifo_size[5]=128
- [ 3.133196] dwc2 f72c0000.usb: dwc2_check_param_tx_fifo_sizes: Invalid parameter g_tx_fifo_size[6]=128
- [ 3.142623] dwc2 f72c0000.usb: dwc2_check_param_tx_fifo_sizes: Invalid parameter g_tx_fifo_size[7]=128
- [ 3.152050] dwc2 f72c0000.usb: dwc2_check_param_tx_fifo_sizes: Invalid parameter g_tx_fifo_size[8]=128
- [ 3.16147Minicom2.7Minicom2.7Minicom2.7Minicom2.77] dwc2 f72c0000.usb: dwc2_check_param_tx_fifo_sizes: Invalid parameter g_tx_fifo_size[9]=16
- [ 3.170817] dwc2 f72c0000.usb: dwc2_check_param_tx_fifo_sizes: Invalid parameter g_tx_fifo_size[10]=16
- [ 3.180243] dwc2 f72c0000.usb: dwc2_check_param_tx_fifo_sizes: Invalid parameter g_tx_fifo_size[11]=16
- [ 3.189670] dwc2 f72c0000.usb: dwc2_check_param_tx_fifo_sizes: Invalid parameter g_tx_fifo_size[12]=16
- [ 3.199097] dwc2 f72c0000.usb: dwc2_check_param_tx_fifo_sizes: Invalid parameter g_tx_fifo_size[13]=16
- [ 3.208524] dwc2 f72c0000.usb: dwc2_check_param_tx_fifo_sizes: Invalid parameter g_tx_fifo_size[14]=16
- [ 3.217951] dwc2 f72c0000.usb: dwc2_check_param_tx_fifo_sizes: Invalid parameter g_tx_fifo_size[15]=16
- [ 3.227487] dwc2 f72c0000.usb: EPs: 16, dedicated fifos, 1920 entries in SPRAM
- [ 3.238298] dwc2 f72c0000.usb: DWC OTG Controller
- [ 3.243324] dwc2 f72c0000.usb: new USB bus registered, assigned bus number 1
- [ 3.250643] dwc2 f72c0000.usb: irq 39, io mem 0xf72c0000
- [ 3.259227] hub 1-0:1.0: USB hub found
- [ 3.263286] hub 1-0:1.0: 1 port detected
- [ 3.273607] dwmmc_k3 f723f000.dwmmc2: fifo-depth property not found, using value of FIFOTH register as default
- [ 3.283963] dwmmc_k3 f723f000.dwmmc2: IDMAC supports 32-bit address mode.
- [ 3.291294] dwmmc_k3 f723f000.dwmmc2: Using internal DMA controller.
- [ 3.297762] dwmmc_k3 f723f000.dwmmc2: Version ID is 250a
- [ 3.303221] dwmmc_k3 f723f000.dwmmc2: DW MMC controller at irq 43,32 bit host data width,128 deep fifo
- [ 3.315442] rtc-pl031 f8003000.rtc: setting system clock to 1970-01-01 00:00:14 UTC (14)
- [ 3.328887] LDO2_2V8: disabling
- [ 3.332199] LDO7_SDIO: disabling
- [ 3.335522] LDO10_2V85: disabling
- [ 3.338920] LDO13_1V8: disabling
- [ 3.342236] LDO14_2V8: disabling
- [ 3.345508] LDO17_2V5: disabling
- [ 3.348818] ALSA device list:
- [ 3.351862] No soundcards found.
- [ 3.356690] uart-pl011 f7113000.uart: no DMA platform data
- [ 3.366274] EXT4-fs (mmcblk0p9): couldn't mount as ext3 due to feature incompatibilities
- [ 3.389325] EXT4-fs (mmcblk0p9): mounted filesystem with ordered data mode. Opts: (null)
- [ 3.397774] VFS: Mounted root (ext4 filesystem) on device 179:9.
- [ 3.410368] devtmpfs: mounted
- [ 3.414492] Freeing unused kernel memory: 1280K
- [ 3.654125] systemd[1]: System time before build time, advancing clock.
- [ 3.666055] dwc2 f72c0000.usb: Set speed to high-speed
- [ 3.671394] usb 1-1: new high-speed USB device number 2 using dwc2
- [ 3.738259] systemd[1]: systemd 230 running in system mode. (+PAM -AUDIT -SELINUX +IMA -APPARMOR +SMACK +SYSVINIT +UTMP -LIBCRYPTSETUP -GCRYPT +GNUTLS +ACL +XZ -LZ4 -
- SECCOMP +BLKID -ELFUTILS +KMOD -IDN)
- [ 3.757764] systemd[1]: Detected architecture arm64.
- [ 3.784116] systemd[1]: Set hostname to <hikey>.
- [ 3.866158] dwc2 f72c0000.usb: Set speed to high-speed
- [ 3.893470] hub 1-1:1.0: USB hub found
- [ 3.897642] hub 1-1:1.0: 3 ports detected
- [ 3.910364] dwmmc_k3 f723f000.dwmmc2: fifo-depth property not found, using value of FIFOTH register as default
- [ 3.920718] dwmmc_k3 f723f000.dwmmc2: IDMAC supports 32-bit address mode.
- [ 3.929322] dwmmc_k3 f723f000.dwmmc2: Using internal DMA controller.
- [ 3.935827] dwmmc_k3 f723f000.dwmmc2: Version ID is 250a
- [ 3.941281] dwmmc_k3 f723f000.dwmmc2: DW MMC controller at irq 43,32 bit host data width,128 deep fifo
- [ 4.082137] systemd[1]: Started Forward Password Requests to Wall Directory Watch.
- [ 4.106821] systemd[1]: Listening on Journal Socket.
- [ 4.126342] systemd[1]: Reached target Swap.
- [ 4.142217] systemd[1]: Reached target Remote File Systems.
- [ 4.162852] systemd[1]: Listening on /dev/initctl Compatibility Named Pipe.
- [ 4.189908] dwc2 f72c0000.usb: Set speed to full-speed
- [ 4.191645] systemd[1]: Created slice System Slice.
- [ 4.200537] usb 1-1.1: new full-speed USB device number 3 using dwc2
- [ 4.228120] systemd[1]: Starting Create list of required static device nodes for the current kernel...
- [ 4.366814] EXT4-fs (mmcblk0p9): re-mounted. Opts: (null)
- [ 4.417796] fuse init (API version 7.26)
- [ 4.622385] usb 1-1: USB disconnect, device number 2
- [ 5.131398] systemd-journald[1601]: Received request to flush runtime journal from PID 1
- [ 5.917458] adv7511 2-0039: 2-0039 supply avdd not found, using dummy regulator
- [ 5.918211] dwmmc_k3 f723f000.dwmmc2: fifo-depth property not found, using value of FIFOTH register as default
- [ 5.918404] dwmmc_k3 f723f000.dwmmc2: IDMAC supports 32-bit address mode.
- [ 5.936101] dwmmc_k3 f723f000.dwmmc2: Using internal DMA controller.
- [ 5.936117] dwmmc_k3 f723f000.dwmmc2: Version ID is 250a
- [ 5.936176] dwmmc_k3 f723f000.dwmmc2: DW MMC controller at irq 43,32 bit host data width,128 deep fifo
- [ 5.954804] Bluetooth: Core ver 2.22
- [ 5.954998] NET: Registered protocol family 31
- [ 5.955003] Bluetooth: HCI device and connection manager initialized
- [ 5.955318] Bluetooth: HCI socket layer initialized
- [ 5.955335] Bluetooth: L2CAP socket layer initialized
- [ 5.955553] Bluetooth: SCO socket layer initialized
- [ 5.994559] Bluetooth: HCI UART driver ver 2.3
- [ 5.994625] adv7511 2-0039: 2-0039 supply dvdd not found, using dummy regulator
- [ 5.994770] adv7511 2-0039: 2-0039 supply pvdd not found, using dummy regulator
- [ 5.994915] adv7511 2-0039: 2-0039 supply a2vdd not found, using dummy regulator
- [ 5.995057] adv7511 2-0039: 2-0039 supply v3p3 not found, using dummy regulator
- [ 5.995291] adv7511 2-0039: 2-0039 supply v1p2 not found, using dummy regulator
- [ 6.011083] dwmmc_k3 f723f000.dwmmc2: fifo-depth property not found, using value of FIFOTH register as default
- [ 6.011272] dwmmc_k3 f723f000.dwmmc2: IDMAC supports 32-bit address mode.
- [ 6.026988] adv7511: probe of 2-0039 failed with error -2
- [ 6.032743] dwmmc_k3 f723f000.dwmmc2: Using internal DMA controller.
- [ 6.032759] dwmmc_k3 f723f000.dwmmc2: Version ID is 250a
- [ 6.032815] dwmmc_k3 f723f000.dwmmc2: DW MMC controller at irq 43,32 bit host data width,128 deep fifo
- [ 6.086605] Bluetooth: HCI UART protocol LL registered
- [ 7.370543] uart-pl011 f7112000.uart: no DMA platform data
- [ 9.786037] dwc2 f72c0000.usb: Set speed to full-speed
- [ 9.791301] usb 1-1: new full-speed USB device number 7 using dwc2
- [ 9.982127] dwc2 f72c0000.usb: Set speed to full-speed
- [ 10.007284] usb 1-1: not running at top speed; connect to a high speed hub
- [ 10.016885] hub 1-1:1.0: USB hub found
- [ 10.021624] hub 1-1:1.0: 3 ports detected
- [ 10.032715] dwmmc_k3 f723f000.dwmmc2: fifo-depth property not found, using value of FIFOTH register as default
- [ 10.043076] dwmmc_k3 f723f000.dwmmc2: IDMAC supports 32-bit address mode.
- [ 10.051619] dwmmc_k3 f723f000.dwmmc2: Using internal DMA controller.
- [ 10.058133] dwmmc_k3 f723f000.dwmmc2: Version ID is 250a
- [ 10.063610] dwmmc_k3 f723f000.dwmmc2: DW MMC controller at irq 43,32 bit host data width,128 deep fifo
- [ 10.314014] dwc2 f72c0000.usb: Set speed to full-speed
- [ 10.319307] usb 1-1.1: new full-speed USB device number 8 using dwc2
- [ 10.405908] dwc2 f72c0000.usb: Set speed to full-speed
- [ 10.441958] dwmmc_k3 f723f000.dwmmc2: fifo-depth property not found, using value of FIFOTH register as default
- [ 10.452376] dwmmc_k3 f723f000.dwmmc2: IDMAC supports 32-bit address mode.
- [ 10.464524] dwmmc_k3 f723f000.dwmmc2: Using internal DMA controller.
- [ 10.471109] dwmmc_k3 f723f000.dwmmc2: Version ID is 250a
- [ 10.476656] dwmmc_k3 f723f000.dwmmc2: DW MMC controller at irq 43,32 bit host data width,128 deep fifo
- [ 10.520039] dm9601 1-1.1:1.0 eth0: register 'dm9601' at usb-f72c0000.usb-1.1, Davicom DM96xx USB 10/100 Ethernet, 00:10:13:50:a4:90
- [ 10.534912] usbcore: registered new interface driver dm9601
- [ 10.535471] dwmmc_k3 f723f000.dwmmc2: fifo-depth property not found, using value of FIFOTH register as default
- [ 10.535665] dwmmc_k3 f723f000.dwmmc2: IDMAC supports 32-bit address mode.
- [ 10.551225] dwmmc_k3 f723f000.dwmmc2: Using internal DMA controller.
- [ 10.551238] dwmmc_k3 f723f000.dwmmc2: Version ID is 250a
- [ 10.551294] dwmmc_k3 f723f000.dwmmc2: DW MMC controller at irq 43,32 bit host data width,128 deep fifo
- [ 10.626318] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
- [ 10.642564] dm9601 1-1.1:1.0 eth0: link down
- [ 10.663787] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
- [ 12.109651] dm9601 1-1.1:1.0 eth0: kevent 4 may have been dropped
- [ 12.115990] dm9601 1-1.1:1.0 eth0: kevent 4 may have been dropped
- [ 12.123340] dm9601 1-1.1:1.0 eth0: kevent 4 may have been dropped
- [ 12.132212] dm9601 1-1.1:1.0 eth0: kevent 4 may have been dropped
- [ 12.140318] dm9601 1-1.1:1.0 eth0: kevent 4 may have been dropped
- [ 12.146634] dm9601 1-1.1:1.0 eth0: kevent 4 may have been dropped
- [ 12.157439] dm9601 1-1.1:1.0 eth0: kevent 4 may have been dropped
- [ 12.165316] dm9601 1-1.1:1.0 eth0: kevent 4 may have been dropped
- [ 12.171654] dm9601 1-1.1:1.0 eth0: kevent 4 may have been dropped
- [ 12.182509] dm9601 1-1.1:1.0 eth0: kevent 4 may have been dropped
- [ 12.189527] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
- [ 12.207415] dm9601 1-1.1:1.0 eth0: link up, 100Mbps, full-duplex, lpa 0xCDE1
- [ 12.288541] dm9601 1-1.1:1.0 eth0: link up, 100Mbps, full-duplex, lpa 0xCDE1
- [ 12.335548] dm9601 1-1.1:1.0 eth0: link up, 100Mbps, full-duplex, lpa 0xCDE1
- [ 12.382390] dm9601 1-1.1:1.0 eth0: link up, 100Mbps, full-duplex, lpa 0xCDE1
- [ 12.452409] dm9601 1-1.1:1.0 eth0: link up, 100Mbps, full-duplex, lpa 0xCDE1
- [ 12.499791] dm9601 1-1.1:1.0 eth0: link up, 100Mbps, full-duplex, lpa 0xCDE1
- [ 12.902849] random: crng init done
- [ 13.264477] dm9601 1-1.1:1.0 eth0: link up, 100Mbps, full-duplex, lpa 0xCDE1
- [ 13.311398] dm9601 1-1.1:1.0 eth0: link up, 100Mbps, full-duplex, lpa 0xCDE1
- [ 13.358550] dm9601 1-1.1:1.0 eth0: link up, 100Mbps, full-duplex, lpa 0xCDE1
- [ 13.405547] dm9601 1-1.1:1.0 eth0: link up, 100Mbps, full-duplex, lpa 0xCDE1
- [ 13.452398] dm9601 1-1.1:1.0 eth0: link up, 100Mbps, full-duplex, lpa 0xCDE1
- [ 13.499543] dm9601 1-1.1:1.0 eth0: link up, 100Mbps, full-duplex, lpa 0xCDE1
- [ 17.365307] audit: type=1006 audit(1510849290.391:2): pid=2824 uid=0 old-auid=4294967295 auid=1000 tty=(none) old-ses=4294967295 ses=1 res=1
Add Comment
Please, Sign In to add comment