Advertisement
Guest User

JP2940J8046DTV

a guest
Feb 10th, 2021
75
0
Never
Not a member of Pastebin yet? Sign Up, it unlocks many cool features!
text 10.50 KB | None | 0 0
  1. smartctl 7.1 2019-12-30 r5022 [x86_64-linux-4.19.107-Unraid] (local build)
  2. Copyright (C) 2002-19, Bruce Allen, Christian Franke, www.smartmontools.org
  3.  
  4. === START OF INFORMATION SECTION ===
  5. Model Family: Hitachi Deskstar 7K1000.C
  6. Device Model: Hitachi HDS721010CLA332
  7. Serial Number: JP2940J8046DTV
  8. LU WWN Device Id: 5 000cca 396c1e98e
  9. Firmware Version: JP4OA3MA
  10. User Capacity: 1,000,204,886,016 bytes [1.00 TB]
  11. Sector Size: 512 bytes logical/physical
  12. Rotation Rate: 7200 rpm
  13. Form Factor: 3.5 inches
  14. Device is: In smartctl database [for details use: -P show]
  15. ATA Version is: ATA8-ACS T13/1699-D revision 4
  16. SATA Version is: SATA 2.6, 3.0 Gb/s
  17. Local Time is: Wed Feb 10 10:35:39 2021 PST
  18. SMART support is: Available - device has SMART capability.
  19. SMART support is: Enabled
  20. AAM feature is: Unavailable
  21. APM feature is: Disabled
  22. Rd look-ahead is: Enabled
  23. Write cache is: Enabled
  24. DSN feature is: Unavailable
  25. ATA Security is: Disabled, frozen [SEC2]
  26. Wt Cache Reorder: Enabled
  27.  
  28. === START OF READ SMART DATA SECTION ===
  29. SMART overall-health self-assessment test result: PASSED
  30.  
  31. General SMART Values:
  32. Offline data collection status: (0x00) Offline data collection activity
  33. was never started.
  34. Auto Offline Data Collection: Disabled.
  35. Self-test execution status: ( 0) The previous self-test routine completed
  36. without error or no self-test has ever
  37. been run.
  38. Total time to complete Offline
  39. data collection: (10223) seconds.
  40. Offline data collection
  41. capabilities: (0x5b) SMART execute Offline immediate.
  42. Auto Offline data collection on/off support.
  43. Suspend Offline collection upon new
  44. command.
  45. Offline surface scan supported.
  46. Self-test supported.
  47. No Conveyance Self-test supported.
  48. Selective Self-test supported.
  49. SMART capabilities: (0x0003) Saves SMART data before entering
  50. power-saving mode.
  51. Supports SMART auto save timer.
  52. Error logging capability: (0x01) Error logging supported.
  53. General Purpose Logging supported.
  54. Short self-test routine
  55. recommended polling time: ( 1) minutes.
  56. Extended self-test routine
  57. recommended polling time: ( 170) minutes.
  58. SCT capabilities: (0x003d) SCT Status supported.
  59. SCT Error Recovery Control supported.
  60. SCT Feature Control supported.
  61. SCT Data Table supported.
  62.  
  63. SMART Attributes Data Structure revision number: 16
  64. Vendor Specific SMART Attributes with Thresholds:
  65. ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE
  66. 1 Raw_Read_Error_Rate PO-R-- 100 100 016 - 0
  67. 2 Throughput_Performance P-S--- 136 136 054 - 92
  68. 3 Spin_Up_Time POS--- 118 118 024 - 321 (Average 322)
  69. 4 Start_Stop_Count -O--C- 100 100 000 - 2113
  70. 5 Reallocated_Sector_Ct PO--CK 100 100 005 - 1
  71. 7 Seek_Error_Rate PO-R-- 100 100 067 - 0
  72. 8 Seek_Time_Performance P-S--- 138 138 020 - 31
  73. 9 Power_On_Hours -O--C- 100 100 000 - 3882
  74. 10 Spin_Retry_Count PO--C- 100 100 060 - 0
  75. 12 Power_Cycle_Count -O--CK 100 100 000 - 1103
  76. 192 Power-Off_Retract_Count -O--CK 099 099 000 - 2139
  77. 193 Load_Cycle_Count -O--C- 099 099 000 - 2139
  78. 194 Temperature_Celsius -O---- 176 176 000 - 34 (Min/Max 17/52)
  79. 196 Reallocated_Event_Count -O--CK 100 100 000 - 1
  80. 197 Current_Pending_Sector -O---K 100 100 000 - 0
  81. 198 Offline_Uncorrectable ---R-- 100 100 000 - 0
  82. 199 UDMA_CRC_Error_Count -O-R-- 200 200 000 - 0
  83. ||||||_ K auto-keep
  84. |||||__ C event count
  85. ||||___ R error rate
  86. |||____ S speed/performance
  87. ||_____ O updated online
  88. |______ P prefailure warning
  89.  
  90. General Purpose Log Directory Version 1
  91. SMART Log Directory Version 1 [multi-sector log support]
  92. Address Access R/W Size Description
  93. 0x00 GPL,SL R/O 1 Log Directory
  94. 0x01 SL R/O 1 Summary SMART error log
  95. 0x03 GPL R/O 1 Ext. Comprehensive SMART error log
  96. 0x04 GPL R/O 7 Device Statistics log
  97. 0x06 SL R/O 1 SMART self-test log
  98. 0x07 GPL R/O 1 Extended self-test log
  99. 0x09 SL R/W 1 Selective self-test log
  100. 0x10 GPL R/O 1 NCQ Command Error log
  101. 0x11 GPL R/O 1 SATA Phy Event Counters log
  102. 0x20 GPL R/O 1 Streaming performance log [OBS-8]
  103. 0x21 GPL R/O 1 Write stream error log
  104. 0x22 GPL R/O 1 Read stream error log
  105. 0x80-0x9f GPL,SL R/W 16 Host vendor specific log
  106. 0xe0 GPL,SL R/W 1 SCT Command/Status
  107. 0xe1 GPL,SL R/W 1 SCT Data Transfer
  108.  
  109. SMART Extended Comprehensive Error Log Version: 0 (1 sectors)
  110. No Errors Logged
  111.  
  112. SMART Extended Self-test Log Version: 1 (1 sectors)
  113. Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error
  114. # 1 Extended offline Completed without error 00% 3882 -
  115. # 2 Extended offline Completed without error 00% 3866 -
  116. # 3 Extended offline Completed without error 00% 3826 -
  117. # 4 Extended offline Aborted by host 90% 3824 -
  118.  
  119. SMART Selective self-test log data structure revision number 1
  120. SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
  121. 1 0 0 Not_testing
  122. 2 0 0 Not_testing
  123. 3 0 0 Not_testing
  124. 4 0 0 Not_testing
  125. 5 0 0 Not_testing
  126. Selective self-test flags (0x0):
  127. After scanning selected spans, do NOT read-scan remainder of disk.
  128. If Selective self-test is pending on power-up, resume after 0 minute delay.
  129.  
  130. SCT Status Version: 3
  131. SCT Version (vendor specific): 256 (0x0100)
  132. Device State: Active (0)
  133. Current Temperature: 34 Celsius
  134. Power Cycle Min/Max Temperature: 22/36 Celsius
  135. Lifetime Min/Max Temperature: 17/52 Celsius
  136. Under/Over Temperature Limit Count: 0/0
  137.  
  138. SCT Temperature History Version: 2
  139. Temperature Sampling Period: 1 minute
  140. Temperature Logging Interval: 1 minute
  141. Min/Max recommended Temperature: 0/60 Celsius
  142. Min/Max Temperature Limit: -40/70 Celsius
  143. Temperature History Size (Index): 128 (83)
  144.  
  145. Index Estimated Time Temperature Celsius
  146. 84 2021-02-10 08:28 36 *****************
  147. ... ..( 11 skipped). .. *****************
  148. 96 2021-02-10 08:40 36 *****************
  149. 97 2021-02-10 08:41 35 ****************
  150. 98 2021-02-10 08:42 35 ****************
  151. 99 2021-02-10 08:43 36 *****************
  152. 100 2021-02-10 08:44 35 ****************
  153. ... ..( 89 skipped). .. ****************
  154. 62 2021-02-10 10:14 35 ****************
  155. 63 2021-02-10 10:15 34 ***************
  156. 64 2021-02-10 10:16 35 ****************
  157. 65 2021-02-10 10:17 34 ***************
  158. ... ..( 17 skipped). .. ***************
  159. 83 2021-02-10 10:35 34 ***************
  160.  
  161. SCT Error Recovery Control:
  162. Read: Disabled
  163. Write: Disabled
  164.  
  165. Device Statistics (GP Log 0x04)
  166. Page Offset Size Value Flags Description
  167. 0x01 ===== = = === == General Statistics (rev 1) ==
  168. 0x01 0x008 4 1103 --- Lifetime Power-On Resets
  169. 0x01 0x010 4 3882 --- Power-on Hours
  170. 0x01 0x018 6 21975767957 --- Logical Sectors Written
  171. 0x01 0x020 6 167763543 --- Number of Write Commands
  172. 0x01 0x028 6 78808088299 --- Logical Sectors Read
  173. 0x01 0x030 6 101580596 --- Number of Read Commands
  174. 0x03 ===== = = === == Rotating Media Statistics (rev 1) ==
  175. 0x03 0x008 4 2447 --- Spindle Motor Power-on Hours
  176. 0x03 0x010 4 2447 --- Head Flying Hours
  177. 0x03 0x018 4 2139 --- Head Load Events
  178. 0x03 0x020 4 1 --- Number of Reallocated Logical Sectors
  179. 0x03 0x028 4 858 --- Read Recovery Attempts
  180. 0x03 0x030 4 2 --- Number of Mechanical Start Failures
  181. 0x04 ===== = = === == General Errors Statistics (rev 1) ==
  182. 0x04 0x008 4 0 --- Number of Reported Uncorrectable Errors
  183. 0x04 0x010 4 647 --- Resets Between Cmd Acceptance and Completion
  184. 0x05 ===== = = === == Temperature Statistics (rev 1) ==
  185. 0x05 0x008 1 34 --- Current Temperature
  186. 0x05 0x010 1 34 N-- Average Short Term Temperature
  187. 0x05 0x018 1 30 N-- Average Long Term Temperature
  188. 0x05 0x020 1 52 --- Highest Temperature
  189. 0x05 0x028 1 17 --- Lowest Temperature
  190. 0x05 0x030 1 46 N-- Highest Average Short Term Temperature
  191. 0x05 0x038 1 0 N-- Lowest Average Short Term Temperature
  192. 0x05 0x040 1 43 N-- Highest Average Long Term Temperature
  193. 0x05 0x048 1 0 N-- Lowest Average Long Term Temperature
  194. 0x05 0x050 4 0 --- Time in Over-Temperature
  195. 0x05 0x058 1 60 --- Specified Maximum Operating Temperature
  196. 0x05 0x060 4 0 --- Time in Under-Temperature
  197. 0x05 0x068 1 0 --- Specified Minimum Operating Temperature
  198. 0x06 ===== = = === == Transport Statistics (rev 1) ==
  199. 0x06 0x008 4 5588 --- Number of Hardware Resets
  200. 0x06 0x010 4 2172 --- Number of ASR Events
  201. 0x06 0x018 4 0 --- Number of Interface CRC Errors
  202. |||_ C monitored condition met
  203. ||__ D supports DSN
  204. |___ N normalized value
  205.  
  206. Pending Defects log (GP Log 0x0c) not supported
  207.  
  208. SATA Phy Event Counters (GP Log 0x11)
  209. ID Size Value Description
  210. 0x0001 2 0 Command failed due to ICRC error
  211. 0x0002 2 0 R_ERR response for data FIS
  212. 0x0005 2 0 R_ERR response for non-data FIS
  213. 0x0009 2 2 Transition from drive PhyRdy to drive PhyNRdy
  214. 0x000a 2 2 Device-to-host register FISes sent due to a COMRESET
  215. 0x000b 2 0 CRC errors within host-to-device FIS
  216. 0x000d 2 0 Non-CRC errors within host-to-device FIS
  217.  
Advertisement
Add Comment
Please, Sign In to add comment
Advertisement