Not a member of Pastebin yet?
Sign Up,
it unlocks many cool features!
- [ 0.000000] Booting Linux on physical CPU 0x0000000000 [0x511f2112]
- [ 0.000000] Linux version 5.4.12-ifc6601-arm64-dev (inforce@inforce-server-Z9PE-D8-WS) (gcc version 6.3.1 20170109 (Linaro GCC 6.3-2017.02)) #11 SMP PREEMPT Wed Jan 22 19:10:53 IST 2020
- [ 0.000000] Machine model: Qualcomm Technologies, Inc. DB820c
- [ 0.000000] efi: Getting EFI parameters from FDT:
- [ 0.000000] efi: UEFI not found.
- [ 0.000000] Reserved memory: created DMA memory pool at 0x0000000090b00000, size 10 MiB
- [ 0.000000] OF: reserved mem: initialized node gpu@8f200000, compatible id shared-dma-pool
- [ 0.000000] cma: Reserved 32 MiB at 0x00000000fe000000
- [ 0.000000] NUMA: No NUMA configuration found
- [ 0.000000] NUMA: Faking a node at [mem 0x0000000080000000-0x000000017e44ffff]
- [ 0.000000] NUMA: NODE_DATA [mem 0x17dc61800-0x17dc62fff]
- [ 0.000000] Zone ranges:
- [ 0.000000] DMA32 [mem 0x0000000080000000-0x00000000ffffffff]
- [ 0.000000] Normal [mem 0x0000000100000000-0x000000017e44ffff]
- [ 0.000000] Movable zone start for each node
- [ 0.000000] Early memory node ranges
- [ 0.000000] node 0: [mem 0x0000000080000000-0x00000000857fffff]
- [ 0.000000] node 0: [mem 0x0000000091700000-0x00000000a1dfffff]
- [ 0.000000] node 0: [mem 0x00000000a2000000-0x000000017e44ffff]
- [ 0.000000] Initmem setup node 0 [mem 0x0000000080000000-0x000000017e44ffff]
- [ 0.000000] On node 0 totalpages: 992080
- [ 0.000000] DMA32 zone: 7420 pages used for memmap
- [ 0.000000] DMA32 zone: 0 pages reserved
- [ 0.000000] DMA32 zone: 474880 pages, LIFO batch:63
- [ 0.000000] Normal zone: 8082 pages used for memmap
- [ 0.000000] Normal zone: 517200 pages, LIFO batch:63
- [ 0.000000] psci: probing for conduit method from DT.
- [ 0.000000] psci: PSCIv1.0 detected in firmware.
- [ 0.000000] psci: Using standard PSCI v0.2 function IDs
- [ 0.000000] psci: MIGRATE_INFO_TYPE not supported.
- [ 0.000000] psci: SMC Calling Convention v1.0
- [ 0.000000] psci: OSI mode supported.
- [ 0.000000] percpu: Embedded 23 pages/cpu s53528 r8192 d32488 u94208
- [ 0.000000] pcpu-alloc: s53528 r8192 d32488 u94208 alloc=23*4096
- [ 0.000000] pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3
- [ 0.000000] Detected PIPT I-cache on CPU0
- [ 0.000000] CPU features: detected: GIC system register CPU interface
- [ 0.000000] CPU features: detected: Qualcomm erratum 1009, ARM erratum 1286807
- [ 0.000000] CPU features: detected: Qualcomm Technologies Falkor/Kryo erratum 1003
- [ 0.000000] CPU features: detected: Kernel page table isolation (KPTI)
- [ 0.000000] ARM_SMCCC_ARCH_WORKAROUND_1 missing from firmware
- [ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 976578
- [ 0.000000] Policy zone: Normal
- [ 0.000000] Kernel command line: root=PARTLABEL=rootfs console=tty0 console=ttyMSM0,115200n8 loglevel=10 log_buf_len=4M androidboot.bootdevice=624000.ufshc androidboot.verifiedbootstate=orange androidboot.veritymode=enforcing androidboot.serialno=94a5c9b7 androidboot.baseband=apq mdss_mdp.panel=0
- [ 0.000000] printk: log_buf_len: 4194304 bytes
- [ 0.000000] printk: early log buf free: 127940(97%)
- [ 0.000000] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes, linear)
- [ 0.000000] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes, linear)
- [ 0.000000] mem auto-init: stack:off, heap alloc:off, heap free:off
- [ 0.000000] software IO TLB: mapped [mem 0xfa000000-0xfe000000] (64MB)
- [ 0.000000] Memory: 3747932K/3968320K available (13948K kernel code, 2284K rwdata, 7464K rodata, 5760K init, 473K bss, 187620K reserved, 32768K cma-reserved)
- [ 0.000000] SLUB: HWalign=128, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
- [ 0.000000] rcu: Preemptible hierarchical RCU implementation.
- [ 0.000000] rcu: RCU restricting CPUs from NR_CPUS=256 to nr_cpu_ids=4.
- [ 0.000000] Tasks RCU enabled.
- [ 0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 25 jiffies.
- [ 0.000000] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4
- [ 0.000000] NR_IRQS: 64, nr_irqs: 64, preallocated irqs: 0
- [ 0.000000] GIC: enabling workaround for GICv3: Qualcomm MSM8996 broken firmware
- [ 0.000000] GICv3: 608 SPIs implemented
- [ 0.000000] GICv3: 0 Extended SPIs implemented
- [ 0.000000] GICv3: Distributor has no Range Selector support
- [ 0.000000] GICv3: 16 PPIs implemented
- [ 0.000000] GICv3: VLPI support, no direct LPI support
- [ 0.000000] GICv3: CPU0: found redistributor 0 region 0:0x0000000009c00000
- [ 0.000000] ITS: No ITS available, not enabling LPIs
- [ 0.000000] random: get_random_bytes called from start_kernel+0x2b8/0x458 with crng_init=0
- [ 0.000000] arch_timer: cp15 and mmio timer(s) running at 19.20MHz (virt/virt).
- [ 0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x46d987e47, max_idle_ns: 440795202767 ns
- [ 0.000003] sched_clock: 56 bits at 19MHz, resolution 52ns, wraps every 4398046511078ns
- [ 0.000352] Console: colour dummy device 80x25
- [ 0.000838] printk: console [tty0] enabled
- [ 0.000918] Calibrating delay loop (skipped), value calculated using timer frequency.. 38.40 BogoMIPS (lpj=76800)
- [ 0.000939] pid_max: default: 32768 minimum: 301
- [ 0.001006] LSM: Security Framework initializing
- [ 0.001058] Mount-cache hash table entries: 8192 (order: 4, 65536 bytes, linear)
- [ 0.001079] Mountpoint-cache hash table entries: 8192 (order: 4, 65536 bytes, linear)
- [ 0.023470] ASID allocator initialised with 32768 entries
- [ 0.031464] rcu: Hierarchical SRCU implementation.
- [ 0.043031] EFI services will not be available.
- [ 0.043352] smp: Bringing up secondary CPUs ...
- [ 0.072046] Detected PIPT I-cache on CPU1
- [ 0.072073] GICv3: CPU1: found redistributor 1 region 0:0x0000000009c40000
- [ 0.072113] CPU1: Booted secondary processor 0x0000000001 [0x511f2112]
- [ 0.106971] Detected PIPT I-cache on CPU2
- [ 0.107799] GICv3: CPU2: found redistributor 100 region 0:0x0000000009c80000
- [ 0.108686] CPU2: Booted secondary processor 0x0000000100 [0x511f2052]
- [ 0.146696] Detected PIPT I-cache on CPU3
- [ 0.147500] GICv3: CPU3: found redistributor 101 region 0:0x0000000009cc0000
- [ 0.148373] CPU3: Booted secondary processor 0x0000000101 [0x511f2052]
- [ 0.153375] smp: Brought up 1 node, 4 CPUs
- [ 0.153463] SMP: Total of 4 processors activated.
- [ 0.153487] CPU features: detected: 32-bit EL0 Support
- [ 0.153504] CPU features: detected: CRC32 instructions
- [ 0.770306] CPU: All CPU(s) started at EL1
- [ 0.770804] alternatives: patching kernel code
- [ 0.779195] devtmpfs: initialized
- [ 0.788957] Registered cp15_barrier emulation handler
- [ 0.789079] Registered setend emulation handler
- [ 0.789624] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns
- [ 0.789651] futex hash table entries: 1024 (order: 4, 65536 bytes, linear)
- [ 0.790393] pinctrl core: initialized pinctrl subsystem
- [ 0.791956] thermal_sys: Registered thermal governor 'step_wise'
- [ 0.791961] thermal_sys: Registered thermal governor 'power_allocator'
- [ 0.793151] DMI not present or invalid.
- [ 0.793583] NET: Registered protocol family 16
- [ 0.796117] DMA: preallocated 256 KiB pool for atomic allocations
- [ 0.796141] audit: initializing netlink subsys (disabled)
- [ 0.798085] audit: type=2000 audit(0.268:1): state=initialized audit_enabled=0 res=1
- [ 0.800273] cpuidle: using governor menu
- [ 0.800667] hw-breakpoint: found 8 breakpoint and 4 watchpoint registers.
- [ 0.803886] Serial: AMBA PL011 UART driver
- [ 0.836694] HugeTLB registered 1.00 GiB page size, pre-allocated 0 pages
- [ 0.836718] HugeTLB registered 32.0 MiB page size, pre-allocated 0 pages
- [ 0.836731] HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages
- [ 0.836742] HugeTLB registered 64.0 KiB page size, pre-allocated 0 pages
- [ 0.856095] cryptd: max_cpu_qlen set to 1000
- [ 0.895028] ACPI: Interpreter disabled.
- [ 0.896641] iommu: Default domain type: Translated
- [ 0.898131] vgaarb: loaded
- [ 0.898432] SCSI subsystem initialized
- [ 0.898754] libata version 3.00 loaded.
- [ 0.898965] usbcore: registered new interface driver usbfs
- [ 0.899005] usbcore: registered new interface driver hub
- [ 0.899093] usbcore: registered new device driver usb
- [ 0.899742] pps_core: LinuxPPS API ver. 1 registered
- [ 0.899756] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
- [ 0.899777] PTP clock support registered
- [ 0.899893] EDAC MC: Ver: 3.0.0
- [ 0.902454] FPGA manager framework
- [ 0.902536] Advanced Linux Sound Architecture Driver Initialized.
- [ 0.907130] clocksource: Switched to clocksource arch_sys_counter
- [ 0.907288] VFS: Disk quotas dquot_6.6.0
- [ 0.907341] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
- [ 0.907537] pnp: PnP ACPI: disabled
- [ 0.918145] s1: supplied by regulator-dummy
- [ 0.918380] s2: supplied by regulator-dummy
- [ 0.918574] s3: supplied by regulator-dummy
- [ 0.918614] s3: Bringing 0uV into 1300000-1300000uV
- [ 0.918802] s4: supplied by regulator-dummy
- [ 0.918841] s4: Bringing 0uV into 1800000-1800000uV
- [ 0.919165] s5: supplied by regulator-dummy
- [ 0.919206] s5: Bringing 0uV into 2150000-2150000uV
- [ 0.919370] s6: supplied by regulator-dummy
- [ 0.919574] s7: supplied by regulator-dummy
- [ 0.919614] s7: Bringing 0uV into 800000-800000uV
- [ 0.919783] s8: supplied by regulator-dummy
- [ 0.919977] s9: supplied by regulator-dummy
- [ 0.920176] s10: supplied by regulator-dummy
- [ 0.920370] s11: supplied by regulator-dummy
- [ 0.920568] s12: supplied by regulator-dummy
- [ 0.920737] l1: supplied by s3
- [ 0.920779] l1: Bringing 0uV into 1000000-1000000uV
- [ 0.920911] l2: supplied by s3
- [ 0.920949] l2: Bringing 0uV into 1250000-1250000uV
- [ 0.921082] l3: supplied by s3
- [ 0.921122] l3: Bringing 0uV into 850000-850000uV
- [ 0.921255] l4: supplied by s3
- [ 0.921300] l4: Bringing 0uV into 1225000-1225000uV
- [ 0.921438] l5: supplied by s5
- [ 0.921653] l6: supplied by regulator-dummy
- [ 0.921695] l6: Bringing 0uV into 1200000-1200000uV
- [ 0.921836] l7: supplied by s5
- [ 0.922064] l8: supplied by regulator-dummy
- [ 0.922104] l8: Bringing 0uV into 1800000-1800000uV
- [ 0.922294] l9: supplied by regulator-dummy
- [ 0.922333] l9: Bringing 0uV into 1800000-1800000uV
- [ 0.922520] l10: supplied by regulator-dummy
- [ 0.922570] l10: Bringing 0uV into 1800000-1800000uV
- [ 0.922715] l11: supplied by s3
- [ 0.922753] l11: Bringing 0uV into 1150000-1150000uV
- [ 0.922978] l12: supplied by regulator-dummy
- [ 0.923019] l12: Bringing 0uV into 1800000-1800000uV
- [ 0.923241] l13: supplied by regulator-dummy
- [ 0.923289] l13: Bringing 0uV into 1800000-1800000uV
- [ 0.923451] l14: supplied by s5
- [ 0.923493] l14: Bringing 0uV into 1800000-1800000uV
- [ 0.923645] l15: supplied by s5
- [ 0.923684] l15: Bringing 0uV into 1800000-1800000uV
- [ 0.923892] l16: supplied by regulator-dummy
- [ 0.923941] l16: Bringing 0uV into 2700000-2700000uV
- [ 0.924149] l17: supplied by regulator-dummy
- [ 0.924190] l17: Bringing 0uV into 2500000-2500000uV
- [ 0.924403] l18: supplied by regulator-dummy
- [ 0.924442] l18: Bringing 0uV into 2700000-2700000uV
- [ 0.924658] l19: supplied by regulator-dummy
- [ 0.924701] l19: Bringing 0uV into 3000000-3000000uV
- [ 0.924888] l20: supplied by s5
- [ 0.924929] l20: Bringing 0uV into 2950000-2950000uV
- [ 0.925095] l21: supplied by s5
- [ 0.925133] l21: Bringing 0uV into 2950000-2950000uV
- [ 0.925355] l22: supplied by regulator-dummy
- [ 0.925399] l22: Bringing 0uV into 3300000-3300000uV
- [ 0.925622] l23: supplied by regulator-dummy
- [ 0.925660] l23: Bringing 0uV into 2800000-2800000uV
- [ 0.925884] l24: supplied by regulator-dummy
- [ 0.925929] l24: Bringing 0uV into 3075000-3075000uV
- [ 0.926107] l25: supplied by s3
- [ 0.926147] l25: Bringing 0uV into 1200000-1200000uV
- [ 0.926320] l26: supplied by s3
- [ 0.926514] l27: supplied by s3
- [ 0.926552] l27: Bringing 0uV into 1000000-1000000uV
- [ 0.926721] l28: supplied by s3
- [ 0.926758] l28: Bringing 0uV into 925000-925000uV
- [ 0.927063] l29: supplied by regulator-dummy
- [ 0.927105] l29: Bringing 0uV into 2800000-2800000uV
- [ 0.927334] l30: supplied by regulator-dummy
- [ 0.927380] l30: Bringing 0uV into 1800000-1800000uV
- [ 0.927558] l31: supplied by s3
- [ 0.927819] l32: supplied by regulator-dummy
- [ 0.927871] l32: Bringing 0uV into 1800000-1800000uV
- [ 0.928114] lvs1: supplied by regulator-dummy
- [ 0.928351] lvs2: supplied by regulator-dummy
- [ 1.031202] NET: Registered protocol family 2
- [ 1.032003] tcp_listen_portaddr_hash hash table entries: 2048 (order: 3, 32768 bytes, linear)
- [ 1.032039] TCP established hash table entries: 32768 (order: 6, 262144 bytes, linear)
- [ 1.032142] TCP bind hash table entries: 32768 (order: 7, 524288 bytes, linear)
- [ 1.032258] TCP: Hash tables configured (established 32768 bind 32768)
- [ 1.032405] UDP hash table entries: 2048 (order: 4, 65536 bytes, linear)
- [ 1.032443] UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes, linear)
- [ 1.032598] NET: Registered protocol family 1
- [ 1.035226] RPC: Registered named UNIX socket transport module.
- [ 1.035242] RPC: Registered udp transport module.
- [ 1.035252] RPC: Registered tcp transport module.
- [ 1.035261] RPC: Registered tcp NFSv4.1 backchannel transport module.
- [ 1.035725] PCI: CLS 0 bytes, default 64
- [ 1.035961] Unpacking initramfs...
- [ 1.280799] Freeing initrd memory: 7320K
- [ 1.285251] kvm [1]: HYP mode not available
- [ 3.657388] Initialise system trusted keyrings
- [ 3.657596] workingset: timestamp_bits=44 max_order=20 bucket_order=0
- [ 3.663220] squashfs: version 4.0 (2009/01/31) Phillip Lougher
- [ 3.664000] NFS: Registering the id_resolver key type
- [ 3.664034] Key type id_resolver registered
- [ 3.664043] Key type id_legacy registered
- [ 3.664058] nfs4filelayout_init: NFSv4 File Layout Driver Registering...
- [ 3.664295] 9p: Installing v9fs 9p2000 file system support
- [ 3.985123] Key type asymmetric registered
- [ 3.985144] Asymmetric key parser 'x509' registered
- [ 3.985195] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 245)
- [ 3.985209] io scheduler mq-deadline registered
- [ 3.985219] io scheduler kyber registered
- [ 3.993500] qcom-qmp-phy 34000.phy: Registered Qcom-QMP phy
- [ 3.993978] qcom-qmp-phy 7410000.phy: Registered Qcom-QMP phy
- [ 3.995164] ufs_qcom_phy_qmp_14nm 627000.phy: invalid resource
- [ 4.001741] qcom-pcie 608000.pcie: 608000.pcie supply vddpe-3v3 not found, using dummy regulator
- [ 4.001874] qcom-pcie 608000.pcie: host bridge /soc/agnoc@0/pcie@608000 ranges:
- [ 4.001918] qcom-pcie 608000.pcie: IO 0x0d200000..0x0d2fffff -> 0x0d200000
- [ 4.001943] qcom-pcie 608000.pcie: MEM 0x0d300000..0x0dffffff -> 0x0d300000
- [ 5.112709] qcom-pcie 608000.pcie: Phy link never came up
- [ 5.114811] qcom-pcie 608000.pcie: cannot initialize host
- [ 5.116564] qcom-pcie: probe of 608000.pcie failed with error -110
- [ 5.117167] qcom-pcie 610000.pcie: 610000.pcie supply vddpe-3v3 not found, using dummy regulator
- [ 5.117287] qcom-pcie 610000.pcie: host bridge /soc/agnoc@0/pcie@610000 ranges:
- [ 5.117332] qcom-pcie 610000.pcie: IO 0x0e200000..0x0e2fffff -> 0x0e200000
- [ 5.117357] qcom-pcie 610000.pcie: MEM 0x0e300000..0x0fffffff -> 0x0e300000
- [ 5.328526] qcom-pcie 610000.pcie: Link up
- [ 5.328679] qcom-pcie 610000.pcie: PCI host bridge to bus 0002:00
- [ 5.328696] pci_bus 0002:00: root bus resource [bus 00-ff]
- [ 5.328710] pci_bus 0002:00: root bus resource [io 0x100000-0x1fffff] (bus address [0xe200000-0xe2fffff])
- [ 5.328726] pci_bus 0002:00: root bus resource [mem 0x0e300000-0x0fffffff]
- [ 5.328763] pci 0002:00:00.0: [17cb:0104] type 01 class 0x060400
- [ 5.328796] pci 0002:00:00.0: reg 0x10: [mem 0x00000000-0x00000fff]
- [ 5.328872] pci 0002:00:00.0: PME# supported from D0 D3hot
- [ 5.331763] pci 0002:01:00.0: [1969:1083] type 00 class 0x020000
- [ 5.332003] pci 0002:01:00.0: reg 0x10: [mem 0x00000000-0x0003ffff 64bit]
- [ 5.332068] pci 0002:01:00.0: reg 0x18: [io 0x0000-0x007f]
- [ 5.332779] pci 0002:01:00.0: PME# supported from D0 D1 D2 D3hot D3cold
- [ 5.345411] pci 0002:00:00.0: BAR 14: assigned [mem 0x0e300000-0x0e3fffff]
- [ 5.345434] pci 0002:00:00.0: BAR 0: assigned [mem 0x0e400000-0x0e400fff]
- [ 5.345451] pci 0002:00:00.0: BAR 13: assigned [io 0x100000-0x100fff]
- [ 5.345471] pci 0002:01:00.0: BAR 0: assigned [mem 0x0e300000-0x0e33ffff 64bit]
- [ 5.345560] pci 0002:01:00.0: BAR 2: assigned [io 0x100000-0x10007f]
- [ 5.345596] pci 0002:00:00.0: PCI bridge to [bus 01-ff]
- [ 5.345609] pci 0002:00:00.0: bridge window [io 0x100000-0x100fff]
- [ 5.345623] pci 0002:00:00.0: bridge window [mem 0x0e300000-0x0e3fffff]
- [ 5.347371] pcieport 0002:00:00.0: PME: Signaling with IRQ 64
- [ 5.348389] pcieport 0002:00:00.0: AER: enabled with IRQ 64
- [ 5.348527] pci 0002:01:00.0: [Firmware Bug]: disabling VPD access (can't determine size of non-standard VPD format)
- [ 5.353278] EINJ: ACPI disabled.
- [ 5.377969] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
- [ 5.380354] SuperH (H)SCI(F) driver initialized
- [ 5.381088] msm_serial 7570000.serial: msm_serial: detected port #2
- [ 5.381130] msm_serial 7570000.serial: uartclk = 19200000
- [ 5.381188] 7570000.serial: ttyMSM2 at MMIO 0x7570000 (irq = 8, base_baud = 1200000) is a MSM
- [ 5.381365] serial serial0: tty port ttyMSM2 registered
- [ 5.381543] msm_serial 75b0000.serial: msm_serial: detected port #0
- [ 5.381569] msm_serial 75b0000.serial: uartclk = 7372800
- [ 5.381605] 75b0000.serial: ttyMSM0 at MMIO 0x75b0000 (irq = 11, base_baud = 460800) is a MSM
- [ 5.381632] msm_serial: console setup on port #0
- [ 6.960379] printk: console [ttyMSM0] enabled
- [ 6.965468] msm_serial: driver initialized
- [ 6.970791] arm-smmu da0000.iommu: probing hardware configuration...
- [ 6.973332] arm-smmu da0000.iommu: SMMUv2 with:
- [ 6.979855] arm-smmu da0000.iommu: stage 1 translation
- [ 6.984057] arm-smmu da0000.iommu: address translation ops
- [ 6.989264] arm-smmu da0000.iommu: non-coherent table walk
- [ 6.994818] arm-smmu da0000.iommu: (IDR0.CTTW overridden by FW configuration)
- [ 7.000384] arm-smmu da0000.iommu: stream matching with 4 register groups
- [ 7.007696] arm-smmu da0000.iommu: 2 context banks (0 stage-2 only)
- [ 7.014552] arm-smmu da0000.iommu: Supported page sizes: 0x63315000
- [ 7.021037] arm-smmu da0000.iommu: Stage-1: 32-bit VA -> 36-bit IPA
- [ 7.028859] ------------[ cut here ]------------
- [ 7.033719] gpu_gx status stuck at 'off'
- [ 7.033745] WARNING: CPU: 0 PID: 1 at drivers/clk/qcom/gdsc.c:145 gdsc_toggle_logic+0xe0/0xe8
- [ 7.042209] Modules linked in:
- [ 7.050625] CPU: 0 PID: 1 Comm: swapper/0 Not tainted 5.4.12-ifc6601-arm64-dev #11
- [ 7.053579] Hardware name: Qualcomm Technologies, Inc. DB820c (DT)
- [ 7.061131] pstate: 60000005 (nZCv daif -PAN -UAO)
- [ 7.067289] pc : gdsc_toggle_logic+0xe0/0xe8
- [ 7.072063] lr : gdsc_toggle_logic+0xe0/0xe8
- [ 7.076489] sp : ffff80001003b9f0
- [ 7.080741] x29: ffff80001003b9f0 x28: 0000000000000000
- [ 7.083957] x27: ffff800011640068 x26: ffff800011c06a50
- [ 7.089337] x25: 0000000000000001 x24: ffff0000f8479810
- [ 7.094633] x23: 0000000000000001 x22: ffff800011c06e28
- [ 7.099927] x21: 0000000000000001 x20: 00000000ffffff92
- [ 7.105223] x19: ffff800011c06a50 x18: ffffffffffffffff
- [ 7.110518] x17: 0000000000000000 x16: 0000000000000001
- [ 7.115814] x15: ffff800011b298c8 x14: 0720072007200720
- [ 7.121109] x13: 0720072007200720 x12: 0720072007200720
- [ 7.126403] x11: 0720072007200720 x10: 0720072007200720
- [ 7.131700] x9 : 0720072007200720 x8 : ffff800011d6cc98
- [ 7.136993] x7 : 7473207375746174 x6 : ffff800011d6c7ac
- [ 7.142290] x5 : 0000000000000000 x4 : 0000000000000000
- [ 7.147585] x3 : 00000000ffffffff x2 : ffff8000ec52f000
- [ 7.152879] x1 : fb58832ffcb9e900 x0 : 0000000000000000
- [ 7.158177] Call trace:
- [ 7.163468] gdsc_toggle_logic+0xe0/0xe8
- [ 7.165641] gdsc_enable+0xd4/0x210
- [ 7.169809] genpd_power_on.part.25+0xe8/0x220
- [ 7.173018] genpd_power_on.part.25+0x44/0x220
- [ 7.177533] __genpd_dev_pm_attach+0x20c/0x218
- [ 7.181959] genpd_dev_pm_attach+0x64/0x70
- [ 7.186390] dev_pm_domain_attach+0x48/0x50
- [ 7.190467] platform_drv_probe+0x38/0xa8
- [ 7.194547] really_probe+0xf8/0x480
- [ 7.198711] driver_probe_device+0x124/0x148
- [ 7.202357] device_driver_attach+0x6c/0x78
- [ 7.206611] __driver_attach+0xf0/0x178
- [ 7.210521] bus_for_each_dev+0x68/0xc8
- [ 7.214336] driver_attach+0x20/0x28
- [ 7.218155] bus_add_driver+0x158/0x248
- [ 7.221974] driver_register+0x60/0x110
- [ 7.225535] __platform_driver_register+0x40/0x48
- [ 7.229358] arm_smmu_driver_init+0x18/0x20
- [ 7.234219] do_one_initcall+0x58/0x1a8
- [ 7.238211] kernel_init_freeable+0x1a0/0x244
- [ 7.242033] kernel_init+0x10/0x108
- [ 7.246541] ret_from_fork+0x10/0x1c
- [ 7.249844] ---[ end trace 9baddb260412b95d ]---
- [ 7.253886] arm-smmu d00000.iommu: probing hardware configuration...
- [ 7.258283] arm-smmu d00000.iommu: SMMUv2 with:
- [ 7.264638] arm-smmu d00000.iommu: stage 1 translation
- [ 7.268865] arm-smmu d00000.iommu: address translation ops
- [ 7.274073] arm-smmu d00000.iommu: non-coherent table walk
- [ 7.279628] arm-smmu d00000.iommu: (IDR0.CTTW overridden by FW configuration)
- [ 7.285189] arm-smmu d00000.iommu: stream matching with 2 register groups
- [ 7.292502] arm-smmu d00000.iommu: 2 context banks (0 stage-2 only)
- [ 7.299356] arm-smmu d00000.iommu: Supported page sizes: 0x63315000
- [ 7.305846] arm-smmu d00000.iommu: Stage-1: 32-bit VA -> 36-bit IPA
- [ 7.312215] arm-smmu d00000.iommu: Handoff smr: 80000000 s2cr: 30000000 cb: 0
- [ 7.319382] arm-smmu 1600000.iommu: probing hardware configuration...
- [ 7.325560] arm-smmu 1600000.iommu: SMMUv2 with:
- [ 7.331999] arm-smmu 1600000.iommu: stage 1 translation
- [ 7.336659] arm-smmu 1600000.iommu: address translation ops
- [ 7.341955] arm-smmu 1600000.iommu: non-coherent table walk
- [ 7.347596] arm-smmu 1600000.iommu: (IDR0.CTTW overridden by FW configuration)
- [ 7.353244] arm-smmu 1600000.iommu: stream matching with 15 register groups
- [ 7.360298] arm-smmu 1600000.iommu: 12 context banks (0 stage-2 only)
- [ 7.367582] arm-smmu 1600000.iommu: Supported page sizes: 0x63315000
- [ 7.373938] arm-smmu 1600000.iommu: Stage-1: 36-bit VA -> 36-bit IPA
- [ 7.382689] arm-smmu d40000.arm,smmu-venus: probing hardware configuration...
- [ 7.386848] arm-smmu d40000.arm,smmu-venus: SMMUv2 with:
- [ 7.393993] arm-smmu d40000.arm,smmu-venus: stage 1 translation
- [ 7.399335] arm-smmu d40000.arm,smmu-venus: address translation ops
- [ 7.405324] arm-smmu d40000.arm,smmu-venus: non-coherent table walk
- [ 7.411661] arm-smmu d40000.arm,smmu-venus: (IDR0.CTTW overridden by FW configuration)
- [ 7.418003] arm-smmu d40000.arm,smmu-venus: stream matching with 42 register groups
- [ 7.425759] arm-smmu d40000.arm,smmu-venus: 7 context banks (0 stage-2 only)
- [ 7.433734] arm-smmu d40000.arm,smmu-venus: Supported page sizes: 0x63315000
- [ 7.440743] arm-smmu d40000.arm,smmu-venus: Stage-1: 32-bit VA -> 36-bit IPA
- [ 7.475698] loop: module loaded
- [ 7.477757] ufshcd-qcom 624000.ufshc: ufshcd_populate_vreg: Unable to find vdd-hba-supply regulator, assuming enabled
- [ 7.480512] scsi host0: ufshcd
- [ 7.496646] spi_qup 7575000.spi: IN:block:16, fifo:64, OUT:block:16, fifo:64
- [ 7.497396] spi_qup 75ba000.spi: IN:block:16, fifo:64, OUT:block:16, fifo:64
- [ 7.504020] spmi spmi-0: PMIC arbiter version v2 (0x20010000)
- [ 7.512151] ufshcd-qcom 624000.ufshc: ufshcd_print_pwr_info:[RX, TX]: gear=[1, 1], lane[1, 1], pwr[SLOWAUTO_MODE, SLOWAUTO_MODE], rate = 0
- [ 7.519166] gpio gpiochip3: (400f000.qcom,spmi:pmic@2:gpios@c000): detected irqchip that is shared with multiple gpiochips: please fix the driver.
- [ 7.528913] s1: supplied by regulator-dummy
- [ 7.541281] s2: supplied by regulator-dummy
- [ 7.545660] l1: supplied by regulator-dummy
- [ 7.550457] libphy: Fixed MDIO Bus: probed
- [ 7.553527] tun: Universal TUN/TAP device driver, 1.6
- [ 7.558407] thunder_xcv, ver 1.0
- [ 7.562644] thunder_bgx, ver 1.0
- [ 7.565901] nicpf, ver 1.0
- [ 7.569848] hclge is initializing
- [ 7.571605] hns3: Hisilicon Ethernet Network Driver for Hip08 Family - version
- [ 7.574987] hns3: Copyright (c) 2017 Huawei Corporation.
- [ 7.582167] e1000e: Intel(R) PRO/1000 Network Driver - 3.2.6-k
- [ 7.587572] e1000e: Copyright(c) 1999 - 2015 Intel Corporation.
- [ 7.593260] igb: Intel(R) Gigabit Ethernet Network Driver - version 5.6.0-k
- [ 7.599031] igb: Copyright (c) 2007-2014 Intel Corporation.
- [ 7.606003] igbvf: Intel(R) Gigabit Virtual Function Network Driver - version 2.4.0-k
- [ 7.611535] igbvf: Copyright (c) 2009 - 2012 Intel Corporation.
- [ 7.619995] sky2: driver version 1.30
- [ 7.626022] usbcore: registered new interface driver rtl8150
- [ 7.629106] usbcore: registered new interface driver r8152
- [ 7.634824] usbcore: registered new interface driver asix
- [ 7.640148] usbcore: registered new interface driver ax88179_178a
- [ 7.645742] VFIO - User Level meta-driver version: 0.3
- [ 7.654290] dwc3-qcom 76f8800.usb: IRQ hs_phy_irq not found
- [ 7.656715] dwc3-qcom 76f8800.usb: IRQ dp_hs_phy_irq not found
- [ 7.662152] dwc3-qcom 76f8800.usb: IRQ dm_hs_phy_irq not found
- [ 7.668054] dwc3-qcom 76f8800.usb: IRQ ss_phy_irq not found
- [ 7.675051] dwc3 7600000.dwc3: Failed to get clk 'ref': -2
- [ 7.681062] dwc3-qcom 6af8800.usb: IRQ hs_phy_irq not found
- [ 7.684902] ufshcd-qcom 624000.ufshc: ufshcd_print_pwr_info:[RX, TX]: gear=[3, 3], lane[1, 1], pwr[FAST MODE, FAST MODE], rate = 2
- [ 7.690382] dwc3-qcom 6af8800.usb: IRQ dp_hs_phy_irq not found
- [ 7.702183] dwc3-qcom 6af8800.usb: IRQ dm_hs_phy_irq not found
- [ 7.707994] dwc3-qcom 6af8800.usb: IRQ ss_phy_irq not found
- [ 7.713867] scsi 0:0:0:49488: scsi_add_lun: correcting incorrect peripheral device type 0x0 for W-LUN 0x c150hN
- [ 7.714890] dwc3 6a00000.dwc3: Failed to get clk 'ref': -2
- [ 7.719316] scsi 0:0:0:49488: Well-known LUN SAMSUNG KLUCG4J1CB-B0B1 0700 PQ: 0 ANSI: 6
- [ 7.731747] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
- [ 7.744543] ehci-pci: EHCI PCI platform driver
- [ 7.750865] ehci-platform: EHCI generic platform driver
- [ 7.755367] scsi 0:0:0:49476: scsi_add_lun: correcting incorrect peripheral device type 0x0 for W-LUN 0x c144hN
- [ 7.755559] ehci-orion: EHCI orion driver
- [ 7.760359] scsi 0:0:0:49476: Well-known LUN SAMSUNG KLUCG4J1CB-B0B1 0700 PQ: 0 ANSI: 6
- [ 7.771617] ehci-exynos: EHCI EXYNOS driver
- [ 7.784340] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
- [ 7.787998] scsi 0:0:0:49456: scsi_add_lun: correcting incorrect peripheral device type 0x0 for W-LUN 0x c130hN
- [ 7.788001] ohci-pci: OHCI PCI platform driver
- [ 7.788080] ohci-platform: OHCI generic platform driver
- [ 7.794207] scsi 0:0:0:49456: Well-known LUN SAMSUNG KLUCG4J1CB-B0B1 0700 PQ: 0 ANSI: 6
- [ 7.805486] ohci-exynos: OHCI EXYNOS driver
- [ 7.823763] usbcore: registered new interface driver usb-storage
- [ 7.827500] scsi 0:0:0:0: Direct-Access SAMSUNG KLUCG4J1CB-B0B1 0700 PQ: 0 ANSI: 6
- [ 7.827545] usbcore: registered new interface driver usbserial_generic
- [ 7.841736] usbserial: USB Serial support registered for generic
- [ 7.848978] random: fast init done
- [ 7.854232] scsi 0:0:0:1: Direct-Access SAMSUNG KLUCG4J1CB-B0B1 0700 PQ: 0 ANSI: 6
- [ 7.857087] sd 0:0:0:0: Power-on or device reset occurred
- [ 7.858782] scsi 0:0:0:2: Direct-Access SAMSUNG KLUCG4J1CB-B0B1 0700 PQ: 0 ANSI: 6
- [ 7.858997] i2c /dev entries driver
- [ 7.860123] i2c_qup 75b5000.i2c: using default clock-frequency 100000
- [ 7.860134] i2c_qup 75b5000.i2c:
- tx channel not available
- [ 7.860804] i2c_qup 75b6000.i2c: using default clock-frequency 100000
- [ 7.860814] i2c_qup 75b6000.i2c:
- tx channel not available
- [ 7.861338] i2c_qup 7577000.i2c: using default clock-frequency 100000
- [ 7.861345] i2c_qup 7577000.i2c:
- tx channel not available
- [ 7.866492] input: pm8941_pwrkey as /devices/platform/soc/400f000.qcom,spmi/spmi-0/0-00/400f000.qcom,spmi:pmic@0:pon@800/400f000.qcom,spmi:pmic@0:pon@800:pwrkey/input/input0
- [ 7.872120] sd 0:0:0:1: Power-on or device reset occurred
- [ 7.879789] sd 0:0:0:2: Power-on or device reset occurred
- [ 7.886694] input: pm8941_pwrkey as /devices/platform/soc/400f000.qcom,spmi/spmi-0/0-00/400f000.qcom,spmi:pmic@0:pon@800/400f000.qcom,spmi:pmic@0:pon@800:resin/input/input1
- [ 7.889365] scsi 0:0:0:3: Direct-Access SAMSUNG KLUCG4J1CB-B0B1 0700 PQ: 0 ANSI: 6
- [ 7.902290] sdhci: Secure Digital Host Controller Interface driver
- [ 7.902293] sdhci: Copyright(c) Pierre Ossman
- [ 7.902911] Synopsys Designware Multimedia Card Interface Driver
- [ 7.910027] scsi 0:0:0:4: Direct-Access SAMSUNG KLUCG4J1CB-B0B1 0700 PQ: 0 ANSI: 6
- [ 7.917295] sdhci-pltfm: SDHCI platform and OF driver helper
- [ 7.920998] sd 0:0:0:0: [sda] 14530560 4096-byte logical blocks: (59.5 GB/55.4 GiB)
- [ 7.921319] sd 0:0:0:0: [sda] 16384-byte physical blocks
- [ 7.923571] scsi 0:0:0:5: Direct-Access SAMSUNG KLUCG4J1CB-B0B1 0700 PQ: 0 ANSI: 6
- [ 7.924107] sd 0:0:0:3: Power-on or device reset occurred
- [ 7.927775] sd 0:0:0:0: [sda] Write Protect is off
- [ 7.928082] sd 0:0:0:0: [sda] Mode Sense: 00 32 00 10
- [ 7.943603] sdhci_msm 74a4900.sdhci: Got CD GPIO
- [ 7.945942] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, supports DPO and FUA
- [ 7.949004] sd 0:0:0:1: [sdb] 1024 4096-byte logical blocks: (4.19 MB/4.00 MiB)
- [ 7.951280] sd 0:0:0:4: Power-on or device reset occurred
- [ 7.952588] sd 0:0:0:0: [sda] Optimal transfer size 8192 bytes not a multiple of physical block size (16384 bytes)
- [ 7.953472] sd 0:0:0:2: [sdc] 1024 4096-byte logical blocks: (4.19 MB/4.00 MiB)
- [ 7.953782] sd 0:0:0:2: [sdc] 16384-byte physical blocks
- [ 7.969956] sd 0:0:0:2: [sdc] Write Protect is off
- [ 7.972487] sd 0:0:0:1: [sdb] 16384-byte physical blocks
- [ 7.972700] sd 0:0:0:1: [sdb] Write Protect is off
- [ 7.972708] sd 0:0:0:1: [sdb] Mode Sense: 00 32 00 10
- [ 7.973206] sd 0:0:0:1: [sdb] Write cache: enabled, read cache: enabled, supports DPO and FUA
- [ 7.978820] sd 0:0:0:3: [sdd] 32768 4096-byte logical blocks: (134 MB/128 MiB)
- [ 7.978830] sd 0:0:0:3: [sdd] 16384-byte physical blocks
- [ 7.980157] sd 0:0:0:2: [sdc] Mode Sense: 00 32 00 10
- [ 7.983571] sd 0:0:0:1: [sdb] Optimal transfer size 8192 bytes not a multiple of physical block size (16384 bytes)
- [ 8.055949] mmc0: SDHCI controller on 74a4900.sdhci [74a4900.sdhci] using ADMA 64-bit
- [ 8.059052] sd 0:0:0:5: Power-on or device reset occurred
- [ 8.059065] sd 0:0:0:2: [sdc] Write cache: enabled, read cache: enabled, supports DPO and FUA
- [ 8.156912] sd 0:0:0:3: [sdd] Write Protect is off
- [ 8.157167] sd 0:0:0:4: [sde] 1048576 4096-byte logical blocks: (4.29 GB/4.00 GiB)
- [ 8.163982] sd 0:0:0:2: [sdc] Optimal transfer size 8192 bytes not a multiple of physical block size (16384 bytes)
- [ 8.165436] sd 0:0:0:3: [sdd] Mode Sense: 00 32 00 10
- [ 8.170007] sd 0:0:0:4: [sde] 16384-byte physical blocks
- [ 8.175785] ledtrig-cpu: registered to indicate activity on CPUs
- [ 8.198514] sd 0:0:0:3: [sdd] Write cache: enabled, read cache: enabled, supports DPO and FUA
- [ 8.198686] sd 0:0:0:4: [sde] Write Protect is off
- [ 8.212847] sd 0:0:0:4: [sde] Mode Sense: 00 32 00 10
- [ 8.212922] sd 0:0:0:3: [sdd] Optimal transfer size 8192 bytes not a multiple of physical block size (16384 bytes)
- [ 8.216133] sd 0:0:0:5: [sdf] 8192 4096-byte logical blocks: (33.6 MB/32.0 MiB)
- [ 8.216443] sd 0:0:0:5: [sdf] 16384-byte physical blocks
- [ 8.217769] sd 0:0:0:4: [sde] Write cache: enabled, read cache: enabled, supports DPO and FUA
- [ 8.218659] sd 0:0:0:5: [sdf] Write Protect is off
- [ 8.218946] sd 0:0:0:5: [sdf] Mode Sense: 00 32 00 10
- [ 8.236206] sd 0:0:0:5: [sdf] Write cache: enabled, read cache: enabled, supports DPO and FUA
- [ 8.240405] sd 0:0:0:4: [sde] Optimal transfer size 8192 bytes not a multiple of physical block size (16384 bytes)
- [ 8.247020] sda: sda1
- [ 8.247023] sdd: sdd1 sdd2 sdd3
- [ 8.247188] sdc: sdc1
- [ 8.251074] sdb: sdb1
- [ 8.254017] sd 0:0:0:2: [sdc] Attached SCSI disk
- [ 8.254088] sd 0:0:0:3: [sdd] Attached SCSI disk
- [ 8.256480] usbcore: registered new interface driver usbhid
- [ 8.257124] sd 0:0:0:1: [sdb] Attached SCSI disk
- [ 8.257281] sd 0:0:0:5: [sdf] Optimal transfer size 8192 bytes not a multiple of physical block size (16384 bytes)
- [ 8.258604] sde: sde1 sde2 sde3 sde4 sde5 sde6 sde7 sde8 sde9 sde10 sde11 sde12 sde13 sde14 sde15 sde16 sde17 sde18 sde19 sde20 sde21 sde22 sde23 sde24 sde25 sde26 sde27 sde28 sde29 sde30
- [ 8.261390] sd 0:0:0:0: [sda] Attached SCSI disk
- [ 8.265642] usbhid: USB HID core driver
- [ 8.270114] sd 0:0:0:4: [sde] Attached SCSI disk
- [ 8.314634] sdf: sdf1 sdf2 sdf3 sdf4 sdf5 sdf6 sdf7 sdf8 sdf9
- [ 8.356119] sd 0:0:0:5: [sdf] Attached SCSI disk
- [ 8.401202] gpio gpiochip1: (400f000.qcom,spmi:pmic@0:gpios@c000): allocate IRQ 101, hwirq 21
- [ 8.402417] gpio gpiochip1: (400f000.qcom,spmi:pmic@0:gpios@c000): found parent hwirq 213
- [ 8.410652] gpio gpiochip1: (400f000.qcom,spmi:pmic@0:gpios@c000): alloc_irqs_parent for 101 parent hwirq 213
- [ 8.438889] gpio gpiochip3: (400f000.qcom,spmi:pmic@2:gpios@c000): allocate IRQ 102, hwirq 5
- [ 8.440738] gpio gpiochip3: (400f000.qcom,spmi:pmic@2:gpios@c000): found parent hwirq 197
- [ 8.448794] gpio gpiochip3: (400f000.qcom,spmi:pmic@2:gpios@c000): alloc_irqs_parent for 102 parent hwirq 197
- [ 8.644673] usbcore: registered new interface driver snd-usb-audio
- [ 8.712830] NET: Registered protocol family 10
- [ 8.748978] Segment Routing with IPv6
- [ 8.752758] NET: Registered protocol family 17
- [ 8.760763] 9pnet: Installing 9P2000 support
- [ 8.763847] Key type dns_resolver registered
- [ 8.780925] registered taskstats version 1
- [ 8.781664] Loading compiled-in X.509 certificates
- [ 10.729425] qcom-qusb2-phy 7411000.phy: Registered Qcom-QUSB2 phy
- [ 10.760067] qcom-qusb2-phy 7412000.phy: Registered Qcom-QUSB2 phy
- [ 10.809773] qcom-pcie 600000.pcie: host bridge /soc/agnoc@0/pcie@600000 ranges:
- [ 10.812965] qcom-pcie 600000.pcie: IO 0x0c200000..0x0c2fffff -> 0x0c200000
- [ 10.818285] qcom-pcie 600000.pcie: MEM 0x0c300000..0x0cffffff -> 0x0c300000
- [ 11.126052] qcom-pcie 600000.pcie: Link up
- [ 11.133605] qcom-pcie 600000.pcie: PCI host bridge to bus 0000:00
- [ 11.134636] pci_bus 0000:00: root bus resource [bus 00-ff]
- [ 11.140314] pci_bus 0000:00: root bus resource [io 0x200000-0x2fffff] (bus address [0xc200000-0xc2fffff])
- [ 11.145838] pci_bus 0000:00: root bus resource [mem 0x0c300000-0x0cffffff]
- [ 11.157344] pci 0000:00:00.0: [17cb:0104] type 01 class 0x060400
- [ 11.162697] pci 0000:00:00.0: reg 0x10: [mem 0x00000000-0x00000fff]
- [ 11.170337] pci 0000:00:00.0: PME# supported from D0 D3hot
- [ 11.360862] pci 0000:01:00.0: [168c:003e] type 00 class 0x028000
- [ 11.364601] pci 0000:01:00.0: reg 0x10: [mem 0x00000000-0x001fffff 64bit]
- [ 11.376084] pci 0000:01:00.0: PME# supported from D0 D3hot D3cold
- [ 11.560368] pci 0000:00:00.0: BAR 14: assigned [mem 0x0c400000-0x0c5fffff]
- [ 11.561473] pci 0000:00:00.0: BAR 0: assigned [mem 0x0c300000-0x0c300fff]
- [ 11.568293] pci 0000:01:00.0: BAR 0: assigned [mem 0x0c400000-0x0c5fffff 64bit]
- [ 11.575846] pci 0000:00:00.0: PCI bridge to [bus 01-ff]
- [ 11.581694] pci 0000:00:00.0: bridge window [mem 0x0c400000-0x0c5fffff]
- [ 11.700469] pcieport 0000:00:00.0: PME: Signaling with IRQ 104
- [ 11.710081] pcieport 0000:00:00.0: AER: enabled with IRQ 104
- [ 11.789604] arm-smmu b40000.iommu: probing hardware configuration...
- [ 11.790631] arm-smmu b40000.iommu: SMMUv2 with:
- [ 11.796913] arm-smmu b40000.iommu: stage 1 translation
- [ 11.800988] arm-smmu b40000.iommu: address translation ops
- [ 11.805992] arm-smmu b40000.iommu: non-coherent table walk
- [ 11.811732] arm-smmu b40000.iommu: (IDR0.CTTW overridden by FW configuration)
- [ 11.817318] arm-smmu b40000.iommu: stream matching with 2 register groups
- [ 11.824808] arm-smmu b40000.iommu: 2 context banks (0 stage-2 only)
- [ 11.832765] arm-smmu b40000.iommu: Supported page sizes: 0x63315000
- [ 11.837860] arm-smmu b40000.iommu: Stage-1: 48-bit VA -> 36-bit IPA
- [ 11.894044] dwc3-qcom 76f8800.usb: IRQ hs_phy_irq not found
- [ 11.895690] dwc3-qcom 76f8800.usb: IRQ dp_hs_phy_irq not found
- [ 11.899888] dwc3-qcom 76f8800.usb: IRQ dm_hs_phy_irq not found
- [ 11.905798] dwc3-qcom 76f8800.usb: IRQ ss_phy_irq not found
- [ 11.949681] dwc3 7600000.dwc3: Failed to get clk 'ref': -2
- [ 12.019896] dwc3-qcom 6af8800.usb: IRQ hs_phy_irq not found
- [ 12.020905] dwc3-qcom 6af8800.usb: IRQ dp_hs_phy_irq not found
- [ 12.025832] dwc3-qcom 6af8800.usb: IRQ dm_hs_phy_irq not found
- [ 12.042754] dwc3-qcom 6af8800.usb: IRQ ss_phy_irq not found
- [ 12.082024] dwc3 6a00000.dwc3: Failed to get clk 'ref': -2
- [ 12.111931] gpio gpiochip1: (400f000.qcom,spmi:pmic@0:gpios@c000): allocate IRQ 105, hwirq 1
- [ 12.112025] gpio gpiochip1: (400f000.qcom,spmi:pmic@0:gpios@c000): found parent hwirq 193
- [ 12.119520] gpio gpiochip1: (400f000.qcom,spmi:pmic@0:gpios@c000): alloc_irqs_parent for 105 parent hwirq 193
- [ 12.127869] input: gpio_keys as /devices/platform/gpio_keys/input/input2
- [ 12.138188] hctosys: unable to open rtc device (rtc0)
- [ 12.144702] cfg80211: Loading compiled-in X.509 certificates for regulatory database
- [ 12.172076] cfg80211: Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7'
- [ 12.172793] ALSA device list:
- [ 12.177542] No soundcards found.
- [ 12.182044] Freeing unused kernel memory: 5760K
- [ 12.183043] platform regulatory.0: Direct firmware load for regulatory.db failed with error -2
- [ 12.185383] platform regulatory.0: Falling back to sysfs fallback for: regulatory.db
- [ 12.208370] Run /init as init process
- [ 22.458999] cfg80211: failed to load regulatory.db
- [ 26.603241] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null)
- [ 26.975491] systemd[1]: System time before build time, advancing clock.
- [ 28.505635] random: systemd: uninitialized urandom read (16 bytes read)
- [ 28.510812] random: systemd: uninitialized urandom read (16 bytes read)
- [ 28.514362] random: systemd: uninitialized urandom read (16 bytes read)
- [ 29.151060] EXT4-fs (sda1): re-mounted. Opts: data=ordered
- [ 29.446196] systemd-journald[306]: Received request to flush runtime journal from PID 1
- [ 30.902328] NET: Registered protocol family 42
- [ 32.600099] qcom_q6v5_pas adsp-pil: adsp-pil supply cx not found, using dummy regulator
- [ 32.600274] qcom_q6v5_pas adsp-pil: adsp-pil supply px not found, using dummy regulator
- [ 32.654834] remoteproc remoteproc0: adsp-pil is available
- [ 32.656941] remoteproc remoteproc0: powering up adsp-pil
- [ 32.659254] remoteproc remoteproc0: Booting fw image adsp.mdt, size 7196
- [ 32.783505] remoteproc remoteproc1: 2080000.remoteproc is available
- [ 32.907421] rtc-pm8xxx 400f000.qcom,spmi:pmic@0:rtc@6000: registered as rtc0
- [ 32.913223] remoteproc remoteproc0: remote processor adsp-pil is now up
- [ 32.916108] qcom,fastrpc-cb adsp-pil:smd-edge:fastrpc:cb@8: Adding to iommu group 0
- [ 32.923832] qcom,fastrpc-cb adsp-pil:smd-edge:fastrpc:cb@9: Adding to iommu group 1
- [ 32.932445] qcom,fastrpc-cb adsp-pil:smd-edge:fastrpc:cb@10: Adding to iommu group 2
- [ 32.941787] qcom,fastrpc-cb adsp-pil:smd-edge:fastrpc:cb@11: Adding to iommu group 3
- [ 32.948359] qcom,fastrpc-cb adsp-pil:smd-edge:fastrpc:cb@12: Adding to iommu group 4
- [ 32.956396] qcom,fastrpc-cb adsp-pil:smd-edge:fastrpc:cb@5: Adding to iommu group 5
- [ 32.966266] qcom,fastrpc-cb adsp-pil:smd-edge:fastrpc:cb@6: Adding to iommu group 6
- [ 32.970384] qcom,fastrpc-cb adsp-pil:smd-edge:fastrpc:cb@7: Adding to iommu group 7
- [ 34.123794] xhci-hcd xhci-hcd.0.auto: xHCI Host Controller
- [ 34.123853] xhci-hcd xhci-hcd.0.auto: new USB bus registered, assigned bus number 1
- [ 34.287442] xhci-hcd xhci-hcd.0.auto: hcc params 0x0220f665 hci version 0x100 quirks 0x0000000002010010
- [ 34.301088] xhci-hcd xhci-hcd.0.auto: irq 96, io mem 0x07600000
- [ 34.342480] hub 1-0:1.0: USB hub found
- [ 34.342552] hub 1-0:1.0: 1 port detected
- [ 34.439242] xhci-hcd xhci-hcd.0.auto: xHCI Host Controller
- [ 34.439287] xhci-hcd xhci-hcd.0.auto: new USB bus registered, assigned bus number 2
- [ 34.563048] xhci-hcd xhci-hcd.0.auto: Host supports USB 3.0 SuperSpeed
- [ 34.568262] usb usb2: We don't know the algorithms for LPM for this host, disabling LPM.
- [ 34.592353] hub 2-0:1.0: USB hub found
- [ 34.594843] hub 2-0:1.0: config failed, hub doesn't have any ports! (err -19)
- [ 34.689647] xhci-hcd xhci-hcd.1.auto: xHCI Host Controller
- [ 34.689715] xhci-hcd xhci-hcd.1.auto: new USB bus registered, assigned bus number 3
- [ 34.772353] mc: Linux media interface: v0.10
- [ 34.796438] xhci-hcd xhci-hcd.1.auto: hcc params 0x0228f665 hci version 0x100 quirks 0x0000000002010010
- [ 34.796536] xhci-hcd xhci-hcd.1.auto: irq 97, io mem 0x06a00000
- [ 34.907386] msm-snd-apq8096 sound: MultiMedia1: error getting cpu dai name
- [ 34.907430] msm-snd-apq8096 sound: Error parsing OF data
- [ 34.973486] atl1c 0002:01:00.0: enabling device (0000 -> 0002)
- [ 34.979838] Bluetooth: Core ver 2.22
- [ 34.979953] NET: Registered protocol family 31
- [ 34.982474] Bluetooth: HCI device and connection manager initialized
- [ 35.073996] Bluetooth: HCI socket layer initialized
- [ 35.074035] Bluetooth: L2CAP socket layer initialized
- [ 35.099115] Bluetooth: SCO socket layer initialized
- [ 35.158734] adreno b00000.gpu: Adding to iommu group 8
- [ 35.191191] atl1c 0002:01:00.0: version 1.0.1.1-NAPI
- [ 35.192462] msm-snd-apq8096 sound: MultiMedia1: error getting cpu dai name
- [ 35.195954] msm-snd-apq8096 sound: Error parsing OF data
- [ 35.208238] msm-snd-apq8096 sound: MultiMedia1: error getting cpu dai name
- [ 35.208276] msm-snd-apq8096 sound: Error parsing OF data
- [ 35.217276] msm_mdp 901000.mdp: Adding to iommu group 9
- [ 35.220278] videodev: Linux video capture interface: v2.00
- [ 35.225469] msm_mdp 901000.mdp: No interconnect support may cause display underflows!
- [ 35.246754] msm-snd-apq8096 sound: MultiMedia1: error getting cpu dai name
- [ 35.246792] msm-snd-apq8096 sound: Error parsing OF data
- [ 35.268101] hub 3-0:1.0: USB hub found
- [ 35.270492] hub 3-0:1.0: 1 port detected
- [ 35.344926] msm 900000.mdss: 900000.mdss supply vdd not found, using dummy regulator
- [ 35.350362] Bluetooth: HCI UART driver ver 2.3
- [ 35.352114] ath10k_pci 0000:01:00.0: enabling device (0000 -> 0002)
- [ 35.359476] msm_mdp 901000.mdp: [drm:mdp5_bind [msm]] MDP5 version v1.7
- [ 35.364387] ath10k_pci 0000:01:00.0: pci irq msi oper_irq_mode 2 irq_mode 0 reset_mode 0
- [ 35.386789] Bluetooth: HCI UART protocol H4 registered
- [ 35.386820] Bluetooth: HCI UART protocol BCSP registered
- [ 35.391020] msm-snd-apq8096 sound: MultiMedia1: error getting cpu dai name
- [ 35.391655] msm 900000.mdss: bound 901000.mdp (ops mdp5_ops [msm])
- [ 35.405494] msm-snd-apq8096 sound: Error parsing OF data
- [ 35.453567] Bluetooth: HCI UART protocol LL registered
- [ 35.453651] Bluetooth: HCI UART protocol Three-wire (H5) registered
- [ 35.494248] msm-snd-apq8096 sound: MultiMedia1: error getting cpu dai name
- [ 35.496870] msm-snd-apq8096 sound: Error parsing OF data
- [ 35.506492] xhci-hcd xhci-hcd.1.auto: xHCI Host Controller
- [ 35.509423] xhci-hcd xhci-hcd.1.auto: new USB bus registered, assigned bus number 4
- [ 35.513208] Bluetooth: HCI UART protocol Broadcom registered
- [ 35.513645] xhci-hcd xhci-hcd.1.auto: Host supports USB 3.0 SuperSpeed
- [ 35.524855] qcom-venus c00000.video-codec: Adding to iommu group 10
- [ 35.530513] usb usb4: We don't know the algorithms for LPM for this host, disabling LPM.
- [ 35.612999] Bluetooth: HCI UART protocol QCA registered
- [ 35.671030] usb 3-1: new high-speed USB device number 2 using xhci-hcd
- [ 35.686429] msm-snd-apq8096 sound: MultiMedia1: error getting cpu dai name
- [ 35.686475] msm-snd-apq8096 sound: Error parsing OF data
- [ 35.695146] hub 4-0:1.0: USB hub found
- [ 35.713727] hub 4-0:1.0: 1 port detected
- [ 35.727098] msm-snd-apq8096 sound: MultiMedia1: error getting cpu dai name
- [ 35.727139] msm-snd-apq8096 sound: Error parsing OF data
- [ 35.737658] msm-snd-apq8096 sound: MultiMedia1: error getting cpu dai name
- [ 35.738342] msm-snd-apq8096 sound: Error parsing OF data
- [ 35.751308] hub 3-1:1.0: USB hub found
- [ 35.752432] hub 3-1:1.0: 4 ports detected
- [ 35.769117] msm-snd-apq8096 sound: MultiMedia1: error getting cpu dai name
- [ 35.769160] msm-snd-apq8096 sound: Error parsing OF data
- [ 35.791920] Bluetooth: hci0: ROME setup
- [ 35.805200] msm 900000.mdss: bound 9a0000.hdmi-tx (ops msm_hdmi_ops [msm])
- [ 35.818035] msm-snd-apq8096 sound: MultiMedia1: error getting cpu dai name
- [ 35.818127] msm-snd-apq8096 sound: Error parsing OF data
- [ 35.847873] msm-snd-apq8096 sound: MultiMedia1: error getting cpu dai name
- [ 35.847914] msm-snd-apq8096 sound: Error parsing OF data
- [ 35.866747] qcom,slim-ngd-ctrl 91c0000.slim: SLIM SAT: Rcvd master capability
- [ 35.867243] qcom,slim-ngd-ctrl 91c0000.slim: SLIM controller Registered
- [ 35.911310] msm-snd-apq8096 sound: MultiMedia1: error getting cpu dai name
- [ 35.911349] msm-snd-apq8096 sound: Error parsing OF data
- [ 35.971900] adreno b00000.gpu: b00000.gpu supply vdd not found, using dummy regulator
- [ 35.993217] adreno b00000.gpu: b00000.gpu supply vddcx not found, using dummy regulator
- [ 36.041927] msm 900000.mdss: [drm:msm_gpu_init [msm]] A530: using IOMMU
- [ 36.059675] usb 4-1: new SuperSpeed Gen 1 USB device number 2 using xhci-hcd
- [ 36.078705] atl1c 0002:01:00.0 enP2p1s0: renamed from eth0
- [ 36.122439] hub 4-1:1.0: USB hub found
- [ 36.123808] hub 4-1:1.0: 4 ports detected
- [ 36.145088] Bluetooth: hci0: QCA controller version 0x00440302
- [ 36.145129] Bluetooth: hci0: QCA Downloading qca/rampatch_00440302.bin
- [ 36.150806] msm-snd-apq8096 sound: MultiMedia1: error getting cpu dai name
- [ 36.157309] msm-snd-apq8096 sound: Error parsing OF data
- [ 36.163624] bluetooth hci0: Direct firmware load for qca/rampatch_00440302.bin failed with error -2
- [ 36.168800] bluetooth hci0: Falling back to sysfs fallback for: qca/rampatch_00440302.bin
- [ 36.177821] usb 3-1.1: new low-speed USB device number 3 using xhci-hcd
- [ 36.202235] ath10k_pci 0000:01:00.0: qca6174 hw3.2 target 0x05030000 chip_id 0x00340aff sub 0000:0000
- [ 36.202279] ath10k_pci 0000:01:00.0: kconfig debug 0 debugfs 0 tracing 0 dfs 0 testmode 0
- [ 36.213784] ath10k_pci 0000:01:00.0: firmware ver WLAN.RM.4.4.1-00079-QCARMSWPZ-1 api 6 features wowlan,ignore-otp crc32 fd869beb
- [ 36.219933] Bluetooth: hci0: QCA Failed to request file: qca/rampatch_00440302.bin (-11)
- [ 36.230282] Bluetooth: hci0: QCA Failed to download patch (-11)
- [ 36.312270] ath10k_pci 0000:01:00.0: failed to fetch board data for bus=pci,bmi-chip-id=0,bmi-board-id=1 from ath10k/QCA6174/hw3.0/board-2.bin
- [ 36.312867] ath10k_pci 0000:01:00.0: board_file api 1 bmi_id 0:1 crc32 ed5f849a
- [ 36.392074] input: LITEON Technology USB Keyboard as /devices/platform/soc/6af8800.usb/6a00000.dwc3/xhci-hcd.1.auto/usb3/3-1/3-1.1/3-1.1:1.0/0003:045E:07B9.0001/input/input3
- [ 36.411163] ath10k_pci 0000:01:00.0: unsupported HTC service id: 1536
- [ 36.430605] ath10k_pci 0000:01:00.0: htt-ver 3.47 wmi-op 4 htt-op 3 cal otp max-sta 32 raw 0 hwcrypto 1
- [ 36.439105] usb 4-1.4: new SuperSpeed Gen 1 USB device number 3 using xhci-hcd
- [ 36.451586] hid-generic 0003:045E:07B9.0001: input: USB HID v1.10 Keyboard [LITEON Technology USB Keyboard] on usb-xhci-hcd.1.auto-1.1/input0
- [ 36.453136] msm-snd-apq8096 sound: MultiMedia1: error getting cpu dai name
- [ 36.469427] msm-snd-apq8096 sound: Error parsing OF data
- [ 36.490189] msm-snd-apq8096 sound: MultiMedia1: error getting cpu dai name
- [ 36.490227] msm-snd-apq8096 sound: Error parsing OF data
- [ 36.521103] ath: EEPROM regdomain: 0x0
- [ 36.522100] ath: EEPROM indicates default country code should be used
- [ 36.524439] ath: doing EEPROM country->regdmn map search
- [ 36.531046] ath: country maps to regdmn code: 0x3a
- [ 36.537095] ath: Country alpha2 being used: US
- [ 36.540692] ath: Regpair used: 0x3a
- [ 36.545094] usb 3-1.2: new low-speed USB device number 4 using xhci-hcd
- [ 36.593176] ath10k_pci 0000:01:00.0 wlp1s0: renamed from wlan0
- [ 36.708921] msm 900000.mdss: bound b00000.gpu (ops a3xx_ops [msm])
- [ 36.714748] input: Logitech Logitech USB Optical Mouse as /devices/platform/soc/6af8800.usb/6a00000.dwc3/xhci-hcd.1.auto/usb3/3-1/3-1.2/3-1.2:1.0/0003:046D:C018.0002/input/input4
- [ 36.715623] hid-generic 0003:046D:C018.0002: input: USB HID v1.11 Mouse [Logitech Logitech USB Optical Mouse] on usb-xhci-hcd.1.auto-1.2/input0
- [ 36.736515] msm-snd-apq8096 sound: MultiMedia1: error getting cpu dai name
- [ 36.745867] usb 4-1.4: reset SuperSpeed Gen 1 USB device number 3 using xhci-hcd
- [ 36.751373] msm-snd-apq8096 sound: Error parsing OF data
- [ 36.812121] r8152 4-1.4:1.0 eth0: v1.10.10
- [ 36.813510] msm-snd-apq8096 sound: MultiMedia1: error getting cpu dai name
- [ 36.818121] msm-snd-apq8096 sound: Error parsing OF data
- [ 36.820125] slimbus 217:1a0:0:0: Invalid range 0: 65535 > 2047
- [ 36.884495] wcd9335-slim 217:1a0:1:0: Failed to allocate ifc register map
- [ 36.888135] msm-snd-apq8096 sound: MultiMedia1: error getting cpu dai name
- [ 36.890279] msm-snd-apq8096 sound: Error parsing OF data
- [ 36.938518] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
- [ 36.938553] [drm] Driver supports precise vblank timestamp query.
- [ 36.950650] [drm] Initialized msm 1.5.0 20130625 for 900000.mdss on minor 0
- [ 36.953237] msm 900000.mdss: [drm:adreno_request_fw [msm]] loaded qcom/a530_pm4.fw from legacy location
- [ 36.962804] msm 900000.mdss: [drm:adreno_request_fw [msm]] loaded qcom/a530_pfp.fw from legacy location
- [ 36.973396] msm 900000.mdss: [drm:adreno_request_fw [msm]] loaded qcom/a530v3_gpmu.fw2 from legacy location
- [ 36.983553] msm 900000.mdss: [drm:adreno_request_fw [msm]] loaded qcom/a530_zap.mdt from legacy location
- [ 37.267331] usbcore: registered new interface driver cdc_ether
- [ 37.353640] r8152 4-1.4:1.0 enx503eaa26d3a4: renamed from eth0
- [ 37.694334] ath10k_pci 0000:01:00.0: unsupported HTC service id: 1536
- [ 37.737347] msm_hdmi_hdcp_read_validate_aksv: AKSV QFPROM doesn't have 20 1's, 20 0's
- [ 37.737356] msm_hdmi_hdcp_read_validate_aksv: QFPROM AKSV chk failed (AKSV=6800000000)
- [ 37.737359] msm_hdmi_hdcp_auth_prepare: ASKV validation failed
- [ 37.737362] msm_hdmi_hdcp_auth_work: auth prepare failed -524
- [ 37.737366] msm_hdmi_hdcp_auth_work: hdcp is not supported
- [ 37.738102] [drm:mdp5_irq_error_handler [msm]] *ERROR* errors: 40000000
- [ 37.754322] Console: switching to colour frame buffer device 240x67
- [ 37.831709] atl1c 0002:01:00.0: atl1c: enP2p1s0 NIC Link is Up<100 Mbps Full Duplex>
- [ 37.831759] IPv6: ADDRCONF(NETDEV_CHANGE): enP2p1s0: link becomes ready
- [ 37.897601] msm 900000.mdss: fb0: msmdrmfb frame buffer device
- [ 37.947247] msm-snd-apq8096 sound: MultiMedia1: error getting cpu dai name
- [ 37.947455] msm-snd-apq8096 sound: Error parsing OF data
- [ 38.098684] ath10k_pci 0000:01:00.0: unsupported HTC service id: 1536
- [ 38.108229] msm-snd-apq8096 sound: MultiMedia1: error getting cpu dai name
- [ 38.108449] msm-snd-apq8096 sound: Error parsing OF data
- [ 38.226402] msm-snd-apq8096 sound: MultiMedia1: error getting cpu dai name
- [ 38.226615] msm-snd-apq8096 sound: Error parsing OF data
- [ 38.308436] msm-snd-apq8096 sound: MultiMedia1: error getting cpu dai name
- [ 38.308641] msm-snd-apq8096 sound: Error parsing OF data
- [ 38.327570] msm-snd-apq8096 sound: MultiMedia1: error getting cpu dai name
- [ 38.327777] msm-snd-apq8096 sound: Error parsing OF data
- [ 38.541658] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
- [ 38.542016] Bluetooth: BNEP filters: protocol multicast
- [ 38.547799] Bluetooth: BNEP socket layer initialized
- [ 39.255204] random: crng init done
- [ 39.255988] random: 7 urandom warning(s) missed due to ratelimiting
- [ 40.775118] broken atomic modeset userspace detected, disabling atomic
- [ 46.059024] timed out waiting for new server
- [ 46.059077] failed to send QMI message
- [ 46.062350] QMI send req failed, ret - -22
- [ 46.067107] qcom,apr remoteproc0:smd-edge.apr_audio_svc.-1.-1: rpmsg_dev_probe: failed: -22
- [ 46.070087] qcom,apr: probe of remoteproc0:smd-edge.apr_audio_svc.-1.-1 failed with error -22
- [ 69.399720] Bluetooth: RFCOMM TTY layer initialized
- [ 69.399758] Bluetooth: RFCOMM socket layer initialized
- [ 69.403876] Bluetooth: RFCOMM ver 1.11
Add Comment
Please, Sign In to add comment