API tools faq
paste
Advertisement
Guest User

XK7130 HAL first Try

a guest
May 10th, 2018
121
0
Never
Add comment
Not a member of Pastebin yet? Sign Up, it unlocks many cool features!
text 19.29 KB | None | 0 0
raw download clone embed print report
  1. # Generated by PNCconf at Thu Nov 9 12:55:45 2017
  2. # If you make changes to this file, they will be
  3. # overwritten when you run PNCconf again
  4.  
  5. loadrt trivkins
  6. loadrt [EMCMOT]EMCMOT servo_period_nsec=[EMCMOT]SERVO_PERIOD num_joints=[TRAJ]AXES num_dio=16
  7. loadrt hostmot2
  8. loadrt hm2_eth board_ip="10.10.10.10" config=" num_encoders=6 num_pwmgens=0 num_stepgens=5 sserial_port_0=00000x"
  9. setp hm2_7i92.0.watchdog.timeout_ns 5000000
  10. loadrt pid names=pid.x,pid.y,pid.z,pid.a,pid.s
  11. loadrt abs names=abs.spindle
  12. loadrt lowpass names=lowpass.spindle
  13. loadrt scale names=scale.spindle
  14. loadrt near
  15. loadrt xor2 count=4
  16.  
  17. addf hm2_7i92.0.read servo-thread
  18. addf motion-command-handler servo-thread
  19. addf motion-controller servo-thread
  20. addf pid.x.do-pid-calcs servo-thread
  21. addf pid.y.do-pid-calcs servo-thread
  22. addf pid.z.do-pid-calcs servo-thread
  23. addf pid.a.do-pid-calcs servo-thread
  24. addf pid.s.do-pid-calcs servo-thread
  25. addf scale.spindle servo-thread
  26. addf abs.spindle servo-thread
  27. addf lowpass.spindle servo-thread
  28. addf near.0 servo-thread
  29. addf hm2_7i92.0.write servo-thread
  30. addf xor2.0 servo-thread
  31. addf xor2.1 servo-thread
  32.  
  33.  
  34. # external output signals
  35.  
  36.  
  37. # --- DIGITAL OUTPUT ---
  38. net atc-out hm2_7i92.0.7i76.0.3.output-07 <= motion.digital-out-00
  39.  
  40. net atc-in hm2_7i92.0.7i76.0.3.output-08 <= motion.digital-out-01
  41.  
  42.  
  43. # --- INCLUDES MANUAL TOOL RELEASE BUTTON INPUT BELOW ---
  44. net unclamp-tool-button xor2.0.in0 <= hm2_7i92.0.7i76.0.3.input-06
  45. net unclamp-tool-toolchange xor2.0.in1 <= motion.digital-out-02
  46. net drawbar-release hm2_7i92.0.7i76.0.3.output-03 <= xor2.0.out
  47.  
  48. net atc-fwd hm2_7i92.0.7i76.0.3.output-05 <= motion.digital-out-03
  49.  
  50. net atc-rev hm2_7i92.0.7i76.0.3.output-06 <= motion.digital-out-04
  51.  
  52.  
  53. # --- SPINDLE OREINT BEGIN ---
  54. net spindle-orient-start motion.spindle-orient hm2_7i92.0.7i77.0.0.output-08
  55.  
  56.  
  57.  
  58. # --- X-ENABLE ---
  59. net x-enable hm2_7i92.0.7i76.0.3.output-12
  60.  
  61. # --- Y-ENABLE ---
  62. net y-enable hm2_7i92.0.7i76.0.3.output-13
  63.  
  64. # --- Z-ENABLE ---
  65. net z-enable hm2_7i92.0.7i76.0.3.output-14
  66.  
  67. # --- A-ENABLE ---
  68. net a-enable hm2_7i92.0.7i76.0.3.output-15
  69.  
  70.  
  71. # --- FLOOD COOLANT ---
  72. net coolant-flood hm2_7i92.0.7i76.0.3.output-04 <= xor2.1.out
  73.  
  74.  
  75. # external input signals
  76.  
  77.  
  78.  
  79.  
  80. # --- SPINDLE ORIENT ENDED ---
  81. net spindle-orient-end motion.spindle-is-oriented hm2_7i92.0.7i77.0.0.input-31
  82.  
  83.  
  84. # --- ESTOP-EXT ---
  85. net estop-ext <= hm2_7i92.0.7i76.0.3.input-21-not
  86.  
  87. # --- PROBE-IN ---
  88. net probe-in <= hm2_7i92.0.7i77.0.0.input-15
  89.  
  90.  
  91.  
  92.  
  93.  
  94.  
  95.  
  96.  
  97.  
  98.  
  99.  
  100. # --- DIGITAL INPUTS ---
  101. net atc-is-out hm2_7i92.0.7i76.0.3.input-00 <= motion.digital-in-00
  102.  
  103. net atc-is-in hm2_7i92.0.7i76.0.3.input-01 <= motion.digital-in-01
  104.  
  105. net Tool-Released hm2_7i92.0.7i76.0.3.input-05 <= motion.digital-in-02
  106.  
  107. net Atc-Zero hm2_7i92.0.7i76.0.3.input-03 <= motion.digital-in-03
  108.  
  109. net Atc-Index hm2_7i92.0.7i76.0.3.input-02 <= motion.digital-in-04
  110.  
  111. net Tool-Clamped hm2_7i92.0.7i76.0.3.input-07 <= motion.digital-in-05
  112.  
  113.  
  114.  
  115. # --- MIN-Z ---
  116. net min-z <= hm2_7i92.0.7i77.0.0.input-06-not
  117.  
  118. # --- HOME-Z ---
  119. net home-z <= hm2_7i92.0.7i77.0.0.input-07-not
  120.  
  121. # --- MAX-Z ---
  122. net max-z <= hm2_7i92.0.7i77.0.0.input-08-not
  123.  
  124. # --- HOME-Y ---
  125. net home-y <= hm2_7i92.0.7i77.0.0.input-04-not
  126.  
  127. # --- MIN-Y ---
  128. net min-y <= hm2_7i92.0.7i77.0.0.input-03-not
  129.  
  130. # --- MAX-Y ---
  131. net max-y <= hm2_7i92.0.7i77.0.0.input-05-not
  132.  
  133. # --- HOME-X ---
  134. net home-x <= hm2_7i92.0.7i77.0.0.input-01-not
  135.  
  136. # --- MAX-X ---
  137. net max-x <= hm2_7i92.0.7i77.0.0.input-02-not
  138.  
  139. # --- MIN-X ---
  140. net min-x <= hm2_7i92.0.7i77.0.0.input-00-not
  141.  
  142. #*******************
  143. # AXIS X
  144. #*******************
  145.  
  146. setp pid.x.Pgain [AXIS_0]P
  147. setp pid.x.Igain [AXIS_0]I
  148. setp pid.x.Dgain [AXIS_0]D
  149. setp pid.x.bias [AXIS_0]BIAS
  150. setp pid.x.FF0 [AXIS_0]FF0
  151. setp pid.x.FF1 [AXIS_0]FF1
  152. setp pid.x.FF2 [AXIS_0]FF2
  153. setp pid.x.deadband [AXIS_0]DEADBAND
  154. setp pid.x.maxoutput [AXIS_0]MAX_OUTPUT
  155. setp pid.x.error-previous-target true
  156. setp pid.x.maxerror .0005
  157.  
  158. net x-index-enable <=> pid.x.index-enable
  159. net x-enable => pid.x.enable
  160. net x-pos-cmd => pid.x.command
  161. net x-vel-cmd => pid.x.command-deriv
  162. net x-pos-fb => pid.x.feedback
  163. net x-output => pid.x.output
  164.  
  165. # Step Gen signals/setup
  166.  
  167. setp hm2_7i92.0.stepgen.00.dirsetup [AXIS_0]DIRSETUP
  168. setp hm2_7i92.0.stepgen.00.dirhold [AXIS_0]DIRHOLD
  169. setp hm2_7i92.0.stepgen.00.steplen [AXIS_0]STEPLEN
  170. setp hm2_7i92.0.stepgen.00.stepspace [AXIS_0]STEPSPACE
  171. setp hm2_7i92.0.stepgen.00.position-scale [AXIS_0]STEP_SCALE
  172. setp hm2_7i92.0.stepgen.00.step_type 0
  173. setp hm2_7i92.0.stepgen.00.control-type 1
  174. setp hm2_7i92.0.stepgen.00.maxaccel [AXIS_0]STEPGEN_MAXACCEL
  175. setp hm2_7i92.0.stepgen.00.maxvel [AXIS_0]STEPGEN_MAXVEL
  176.  
  177. # ---closedloop stepper signals---
  178.  
  179. net x-pos-cmd <= axis.0.motor-pos-cmd
  180. net x-vel-cmd <= axis.0.joint-vel-cmd
  181. net x-output <= hm2_7i92.0.stepgen.00.velocity-cmd
  182. net x-pos-fb <= hm2_7i92.0.stepgen.00.position-fb
  183. net x-pos-fb => axis.0.motor-pos-fb
  184. net x-enable <= axis.0.amp-enable-out
  185. net x-enable => hm2_7i92.0.stepgen.00.enable
  186.  
  187.  
  188.  
  189. # ---Encoder feedback signals/setup---
  190.  
  191. setp hm2_7i92.0.encoder.01.counter-mode 0
  192. setp hm2_7i92.0.encoder.01.filter 1
  193. setp hm2_7i92.0.encoder.01.index-invert 0
  194. setp hm2_7i92.0.encoder.01.index-mask 0
  195. setp hm2_7i92.0.encoder.01.index-mask-invert 0
  196. setp hm2_7i92.0.encoder.01.scale [AXIS_0]ENCODER_SCALE
  197.  
  198. net x-encpos-fb <= hm2_7i92.0.encoder.01.position
  199. ##net x-vel-fb <= hm2_7i92.0.encoder.01.velocity
  200. ##net x-encpos-fb => axis.0.motor-pos-fb
  201. net x-index-enable axis.0.index-enable <=> hm2_7i92.0.encoder.01.index-enable
  202. net x-pos-rawcounts <= hm2_7i92.0.encoder.01.rawcounts
  203.  
  204.  
  205.  
  206. # ---setup home / limit switch signals---
  207.  
  208. net home-x => axis.0.home-sw-in
  209. net min-x => axis.0.neg-lim-sw-in
  210. net max-x => axis.0.pos-lim-sw-in
  211.  
  212. #*******************
  213. # AXIS Y
  214. #*******************
  215.  
  216. setp pid.y.Pgain [AXIS_1]P
  217. setp pid.y.Igain [AXIS_1]I
  218. setp pid.y.Dgain [AXIS_1]D
  219. setp pid.y.bias [AXIS_1]BIAS
  220. setp pid.y.FF0 [AXIS_1]FF0
  221. setp pid.y.FF1 [AXIS_1]FF1
  222. setp pid.y.FF2 [AXIS_1]FF2
  223. setp pid.y.deadband [AXIS_1]DEADBAND
  224. setp pid.y.maxoutput [AXIS_1]MAX_OUTPUT
  225. setp pid.y.error-previous-target true
  226. setp pid.y.maxerror .0005
  227.  
  228. net y-index-enable <=> pid.y.index-enable
  229. net y-enable => pid.y.enable
  230. net y-pos-cmd => pid.y.command
  231. net y-vel-cmd => pid.y.command-deriv
  232. net y-pos-fb => pid.y.feedback
  233. net y-output => pid.y.output
  234.  
  235. # Step Gen signals/setup
  236.  
  237. setp hm2_7i92.0.stepgen.01.dirsetup [AXIS_1]DIRSETUP
  238. setp hm2_7i92.0.stepgen.01.dirhold [AXIS_1]DIRHOLD
  239. setp hm2_7i92.0.stepgen.01.steplen [AXIS_1]STEPLEN
  240. setp hm2_7i92.0.stepgen.01.stepspace [AXIS_1]STEPSPACE
  241. setp hm2_7i92.0.stepgen.01.position-scale [AXIS_1]STEP_SCALE
  242. setp hm2_7i92.0.stepgen.01.step_type 0
  243. setp hm2_7i92.0.stepgen.01.control-type 1
  244. setp hm2_7i92.0.stepgen.01.maxaccel [AXIS_1]STEPGEN_MAXACCEL
  245. setp hm2_7i92.0.stepgen.01.maxvel [AXIS_1]STEPGEN_MAXVEL
  246.  
  247. # ---closedloop stepper signals---
  248.  
  249. net y-pos-cmd <= axis.1.motor-pos-cmd
  250. net y-vel-cmd <= axis.1.joint-vel-cmd
  251. net y-output <= hm2_7i92.0.stepgen.01.velocity-cmd
  252. net y-pos-fb <= hm2_7i92.0.stepgen.01.position-fb
  253. net y-pos-fb => axis.1.motor-pos-fb
  254. net y-enable <= axis.1.amp-enable-out
  255. net y-enable => hm2_7i92.0.stepgen.01.enable
  256.  
  257. # ---Encoder feedback signals/setup---
  258.  
  259. setp hm2_7i92.0.encoder.02.counter-mode 0
  260. setp hm2_7i92.0.encoder.02.filter 1
  261. setp hm2_7i92.0.encoder.02.index-invert 0
  262. setp hm2_7i92.0.encoder.02.index-mask 0
  263. setp hm2_7i92.0.encoder.02.index-mask-invert 0
  264. setp hm2_7i92.0.encoder.02.scale [AXIS_1]ENCODER_SCALE
  265.  
  266. net y-encpos-fb <= hm2_7i92.0.encoder.02.position
  267. ##net y-vel-fb <= hm2_7i92.0.encoder.02.velocity
  268. ##net y-pos-fb => axis.1.motor-pos-fb
  269. net y-index-enable axis.1.index-enable <=> hm2_7i92.0.encoder.02.index-enable
  270. net y-pos-rawcounts <= hm2_7i92.0.encoder.02.rawcounts
  271.  
  272.  
  273.  
  274. # ---setup home / limit switch signals---
  275.  
  276. net home-y => axis.1.home-sw-in
  277. net min-y => axis.1.neg-lim-sw-in
  278. net max-y => axis.1.pos-lim-sw-in
  279.  
  280. #*******************
  281. # AXIS Z
  282. #*******************
  283.  
  284. setp pid.z.Pgain [AXIS_2]P
  285. setp pid.z.Igain [AXIS_2]I
  286. setp pid.z.Dgain [AXIS_2]D
  287. setp pid.z.bias [AXIS_2]BIAS
  288. setp pid.z.FF0 [AXIS_2]FF0
  289. setp pid.z.FF1 [AXIS_2]FF1
  290. setp pid.z.FF2 [AXIS_2]FF2
  291. setp pid.z.deadband [AXIS_2]DEADBAND
  292. setp pid.z.maxoutput [AXIS_2]MAX_OUTPUT
  293. setp pid.z.error-previous-target true
  294. setp pid.z.maxerror .0005
  295.  
  296. net z-index-enable <=> pid.z.index-enable
  297. net z-enable => pid.z.enable
  298. net z-pos-cmd => pid.z.command
  299. net z-vel-cmd => pid.z.command-deriv
  300. net z-pos-fb => pid.z.feedback
  301. net z-output => pid.z.output
  302.  
  303. # Step Gen signals/setup
  304.  
  305. setp hm2_7i92.0.stepgen.02.dirsetup [AXIS_2]DIRSETUP
  306. setp hm2_7i92.0.stepgen.02.dirhold [AXIS_2]DIRHOLD
  307. setp hm2_7i92.0.stepgen.02.steplen [AXIS_2]STEPLEN
  308. setp hm2_7i92.0.stepgen.02.stepspace [AXIS_2]STEPSPACE
  309. setp hm2_7i92.0.stepgen.02.position-scale [AXIS_2]STEP_SCALE
  310. setp hm2_7i92.0.stepgen.02.step_type 0
  311. setp hm2_7i92.0.stepgen.02.control-type 1
  312. setp hm2_7i92.0.stepgen.02.maxaccel [AXIS_2]STEPGEN_MAXACCEL
  313. setp hm2_7i92.0.stepgen.02.maxvel [AXIS_2]STEPGEN_MAXVEL
  314.  
  315. # ---closedloop stepper signals---
  316.  
  317. net z-pos-cmd <= axis.2.motor-pos-cmd
  318. net z-vel-cmd <= axis.2.joint-vel-cmd
  319. net z-output <= hm2_7i92.0.stepgen.02.velocity-cmd
  320. net z-pos-fb <= hm2_7i92.0.stepgen.02.position-fb
  321. net z-pos-fb => axis.2.motor-pos-fb
  322. net z-enable <= axis.2.amp-enable-out
  323. net z-enable => hm2_7i92.0.stepgen.02.enable
  324.  
  325.  
  326. # ---Encoder feedback signals/setup---
  327.  
  328. setp hm2_7i92.0.encoder.04.counter-mode 0
  329. setp hm2_7i92.0.encoder.04.filter 1
  330. setp hm2_7i92.0.encoder.04.index-invert 0
  331. setp hm2_7i92.0.encoder.04.index-mask 0
  332. setp hm2_7i92.0.encoder.04.index-mask-invert 0
  333. setp hm2_7i92.0.encoder.04.scale [AXIS_2]ENCODER_SCALE
  334.  
  335. net z-encpos-fb <= hm2_7i92.0.encoder.04.position
  336. ##net z-vel-fb <= hm2_7i92.0.encoder.04.velocity
  337. ##net z-pos-fb => axis.2.motor-pos-fb
  338. net z-index-enable axis.2.index-enable <=> hm2_7i92.0.encoder.04.index-enable
  339. net z-pos-rawcounts <= hm2_7i92.0.encoder.04.rawcounts
  340.  
  341.  
  342.  
  343. # ---setup home / limit switch signals---
  344.  
  345. net home-z => axis.2.home-sw-in
  346. net min-z => axis.2.neg-lim-sw-in
  347. net max-z => axis.2.pos-lim-sw-in
  348.  
  349. #*******************
  350. # AXIS A
  351. #*******************
  352.  
  353. setp pid.a.Pgain [AXIS_3]P
  354. setp pid.a.Igain [AXIS_3]I
  355. setp pid.a.Dgain [AXIS_3]D
  356. setp pid.a.bias [AXIS_3]BIAS
  357. setp pid.a.FF0 [AXIS_3]FF0
  358. setp pid.a.FF1 [AXIS_3]FF1
  359. setp pid.a.FF2 [AXIS_3]FF2
  360. setp pid.a.deadband [AXIS_3]DEADBAND
  361. setp pid.a.maxoutput [AXIS_3]MAX_OUTPUT
  362. setp pid.a.error-previous-target true
  363. setp pid.a.maxerror .0005
  364.  
  365. net a-index-enable <=> pid.a.index-enable
  366. net a-enable => pid.a.enable
  367. net a-pos-cmd => pid.a.command
  368. net a-vel-cmd => pid.a.command-deriv
  369. net a-pos-fb => pid.a.feedback
  370. net a-output => pid.a.output
  371.  
  372. # Step Gen signals/setup
  373.  
  374. setp hm2_7i92.0.stepgen.03.dirsetup [AXIS_3]DIRSETUP
  375. setp hm2_7i92.0.stepgen.03.dirhold [AXIS_3]DIRHOLD
  376. setp hm2_7i92.0.stepgen.03.steplen [AXIS_3]STEPLEN
  377. setp hm2_7i92.0.stepgen.03.stepspace [AXIS_3]STEPSPACE
  378. setp hm2_7i92.0.stepgen.03.position-scale [AXIS_3]STEP_SCALE
  379. setp hm2_7i92.0.stepgen.03.step_type 0
  380. setp hm2_7i92.0.stepgen.03.control-type 1
  381. setp hm2_7i92.0.stepgen.03.maxaccel [AXIS_3]STEPGEN_MAXACCEL
  382. setp hm2_7i92.0.stepgen.03.maxvel [AXIS_3]STEPGEN_MAXVEL
  383.  
  384. # ---closedloop stepper signals---
  385.  
  386. net a-pos-cmd <= axis.3.motor-pos-cmd
  387. net a-vel-cmd <= axis.3.joint-vel-cmd
  388. net a-output <= hm2_7i92.0.stepgen.03.velocity-cmd
  389. net a-pos-fb <= hm2_7i92.0.stepgen.03.position-fb
  390. net a-pos-fb => axis.3.motor-pos-fb
  391. net a-enable <= axis.3.amp-enable-out
  392. net a-enable => hm2_7i92.0.stepgen.03.enable
  393.  
  394. # ---Encoder feedback signals/setup---
  395.  
  396. setp hm2_7i92.0.encoder.05.counter-mode 0
  397. setp hm2_7i92.0.encoder.05.filter 1
  398. setp hm2_7i92.0.encoder.05.index-invert 0
  399. setp hm2_7i92.0.encoder.05.index-mask 0
  400. setp hm2_7i92.0.encoder.05.index-mask-invert 0
  401. setp hm2_7i92.0.encoder.05.scale [AXIS_3]ENCODER_SCALE
  402.  
  403. net a-encpos-fb <= hm2_7i92.0.encoder.05.position
  404. ##net a-vel-fb <= hm2_7i92.0.encoder.05.velocity
  405. ##net a-pos-fb => axis.3.motor-pos-fb
  406. net a-index-enable axis.3.index-enable <=> hm2_7i92.0.encoder.05.index-enable
  407. net a-pos-rawcounts <= hm2_7i92.0.encoder.05.rawcounts
  408.  
  409.  
  410.  
  411. # ---setup home / limit switch signals---
  412.  
  413. net a-home-sw => axis.3.home-sw-in
  414. net a-neg-limit => axis.3.neg-lim-sw-in
  415. net a-pos-limit => axis.3.pos-lim-sw-in
  416.  
  417. #*******************
  418. # SPINDLE S
  419. #*******************
  420.  
  421. setp pid.s.Pgain [SPINDLE_9]P
  422. setp pid.s.Igain [SPINDLE_9]I
  423. setp pid.s.Dgain [SPINDLE_9]D
  424. setp pid.s.bias [SPINDLE_9]BIAS
  425. setp pid.s.FF0 [SPINDLE_9]FF0
  426. setp pid.s.FF1 [SPINDLE_9]FF1
  427. setp pid.s.FF2 [SPINDLE_9]FF2
  428. setp pid.s.deadband [SPINDLE_9]DEADBAND
  429. setp pid.s.maxoutput [SPINDLE_9]MAX_OUTPUT
  430. setp pid.s.error-previous-target true
  431.  
  432. net spindle-index-enable <=> pid.s.index-enable
  433. net spindle-enable => pid.s.enable
  434. net spindle-vel-cmd-rpm-abs => pid.s.command
  435. net spindle-vel-fb-rpm-abs => pid.s.feedback
  436. net spindle-output <= pid.s.output
  437.  
  438. # ---PWM Generator signals/setup---
  439.  
  440. setp hm2_7i92.0.7i77.0.1.analogout0-scalemax [SPINDLE_9]OUTPUT_SCALE
  441. setp hm2_7i92.0.7i77.0.1.analogout0-minlim [SPINDLE_9]OUTPUT_MIN_LIMIT
  442. setp hm2_7i92.0.7i77.0.1.analogout0-maxlim [SPINDLE_9]OUTPUT_MAX_LIMIT
  443.  
  444. net spindle-output => hm2_7i92.0.7i77.0.1.analogout0
  445. net spindle-enable hm2_7i92.0.7i77.0.1.analogena
  446.  
  447. # ---Encoder feedback signals/setup---
  448.  
  449. setp hm2_7i92.0.encoder.00.counter-mode 0
  450. setp hm2_7i92.0.encoder.00.filter 1
  451. setp hm2_7i92.0.encoder.00.index-invert 0
  452. setp hm2_7i92.0.encoder.00.index-mask 0
  453. setp hm2_7i92.0.encoder.00.index-mask-invert 0
  454. setp hm2_7i92.0.encoder.00.scale [SPINDLE_9]ENCODER_SCALE
  455.  
  456. net spindle-revs <= hm2_7i92.0.encoder.00.position
  457. net spindle-vel-fb-rps <= hm2_7i92.0.encoder.00.velocity
  458. net spindle-index-enable <=> hm2_7i92.0.encoder.00.index-enable
  459.  
  460. # ---setup spindle control signals---
  461.  
  462. net spindle-vel-cmd-rps <= motion.spindle-speed-out-rps
  463. net spindle-vel-cmd-rps-abs <= motion.spindle-speed-out-rps-abs
  464. net spindle-vel-cmd-rpm <= motion.spindle-speed-out
  465. net spindle-vel-cmd-rpm-abs <= motion.spindle-speed-out-abs
  466. net spindle-enable <= motion.spindle-on
  467. net spindle-cw <= motion.spindle-forward
  468. net spindle-ccw <= motion.spindle-reverse
  469. net spindle-brake <= motion.spindle-brake
  470. net spindle-revs => motion.spindle-revs
  471. net spindle-at-speed => motion.spindle-at-speed
  472. net spindle-vel-fb-rps => motion.spindle-speed-in
  473. net spindle-index-enable <=> motion.spindle-index-enable
  474.  
  475. # ---Setup spindle at speed signals---
  476.  
  477. net spindle-vel-cmd-rps => near.0.in1
  478. net spindle-vel-fb-rps => near.0.in2
  479.  
  480. ##########################
  481. net spindle-at-speed <= near.0.out
  482. ##########################
  483. setp near.0.scale 1.000000
  484. ##########################
  485. setp near.0.difference 5
  486.  
  487. ##sets spindle-at-speed true
  488.  
  489. # Use ACTUAL spindle velocity from spindle encoder
  490. # spindle-velocity bounces around so we filter it with lowpass
  491. # spindle-velocity is signed so we use absolute component to remove sign
  492. # ACTUAL velocity is in RPS not RPM so we scale it.
  493.  
  494. setp scale.spindle.gain 60
  495. setp lowpass.spindle.gain 1.000000
  496. net spindle-vel-fb-rps => scale.spindle.in
  497. net spindle-fb-rpm scale.spindle.out => abs.spindle.in
  498. net spindle-fb-rpm-abs abs.spindle.out => lowpass.spindle.in
  499. net spindle-fb-rpm-abs-filtered lowpass.spindle.out
  500.  
  501. #******************************
  502. # connect miscellaneous signals
  503. #******************************
  504.  
  505. # ---HALUI signals---
  506. ## BELOW COMMENTED OUT FOR PENDANT TO WORK
  507. net joint-select-a halui.joint.0.select
  508. net x-is-homed halui.joint.0.is-homed
  509. ##net jog-x-pos halui.jog.0.plus
  510. ##net jog-x-neg halui.jog.0.minus
  511. net jog-x-analog halui.jog.0.analog
  512. net joint-select-b halui.joint.1.select
  513. net y-is-homed halui.joint.1.is-homed
  514. ##net jog-y-pos halui.jog.1.plus
  515. ##net jog-y-neg halui.jog.1.minus
  516. net jog-y-analog halui.jog.1.analog
  517. net joint-select-c halui.joint.2.select
  518. net z-is-homed halui.joint.2.is-homed
  519. ##net jog-z-pos halui.jog.2.plus
  520. ##net jog-z-neg halui.jog.2.minus
  521. net jog-z-analog halui.jog.2.analog
  522. net joint-select-d halui.joint.3.select
  523. net a-is-homed halui.joint.3.is-homed
  524. ##net jog-a-pos halui.jog.3.plus
  525. ##net jog-a-neg halui.jog.3.minus
  526. net jog-a-analog halui.jog.3.analog
  527. net jog-selected-pos halui.jog.selected.plus
  528. net jog-selected-neg halui.jog.selected.minus
  529. net spindle-manual-cw halui.spindle.forward
  530. net spindle-manual-ccw halui.spindle.reverse
  531. net spindle-manual-stop halui.spindle.stop
  532.  
  533. ## BELOW COMMENTED OUT FOR PENDANT TO WORK
  534. ##net machine-is-on halui.machine.is-on
  535. net jog-speed halui.jog-speed
  536. net MDI-mode halui.mode.is-mdi
  537.  
  538.  
  539. # ---tool release---
  540.  
  541.  
  542.  
  543. # ---coolant signals---
  544.  
  545. net coolant-mist <= iocontrol.0.coolant-mist
  546.  
  547.  
  548. # ---probe signal---
  549.  
  550. net probe-in => motion.probe-input
  551.  
  552. # ---motion control signals---
  553.  
  554. ## BELOW COMMENTED OUT FOR PENDANT TO WORK
  555.  
  556. ##net in-position <= motion.in-position
  557. net machine-is-enabled <= motion.motion-enabled
  558.  
  559. # ---digital in / out signals---
  560.  
  561.  
  562. # ---estop signals---
  563.  
  564. net estop-out <= iocontrol.0.user-enable-out
  565. net estop-ext => iocontrol.0.emc-enable-in
  566.  
  567. # ---manual tool change signals---
  568.  
  569. #loadusr -W hal_manualtoolchange
  570. #net tool-change-request iocontrol.0.tool-change => hal_manualtoolchange.change
  571. #net tool-change-confirmed iocontrol.0.tool-changed <= hal_manualtoolchange.changed
  572. #net tool-number iocontrol.0.tool-prep-number => hal_manualtoolchange.number
  573.  
  574.  
  575. net tool-prepare-loopback iocontrol.0.tool-prepare => iocontrol.0.tool-prepared
  576.  
  577. net tool-change-loop iocontrol.0.tool-change => iocontrol.0.tool-changed
Advertisement
Add Comment
Please, Sign In to add comment
Advertisement
Public Pastes
Advertisement
We use cookies for various purposes including analytics. By continuing to use Pastebin, you agree to our use of cookies as described in the Cookies Policy.  OK, I Understand
Not a member of Pastebin yet?
Sign Up, it unlocks many cool features!