RockPro64 with VL716

[  403.235656] fusb302 4-0022: CC connected in CC1 as DFP
[  403.256421] xhci-hcd xhci-hcd.0.auto: xHCI Host Controller
[  403.257244] xhci-hcd xhci-hcd.0.auto: new USB bus registered, assigned bus number 7
[  403.257539] xhci-hcd xhci-hcd.0.auto: hcc params 0x0220fe64 hci version 0x110 quirks 0x02030010
[  403.257609] xhci-hcd xhci-hcd.0.auto: irq 223, io mem 0xfe800000
[  403.258115] usb usb7: New USB device found, idVendor=1d6b, idProduct=0002
[  403.258140] usb usb7: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[  403.258162] usb usb7: Product: xHCI Host Controller
[  403.258184] usb usb7: Manufacturer: Linux 4.4.126-rockchip-ayufan-260 xhci-hcd
[  403.258204] usb usb7: SerialNumber: xhci-hcd.0.auto
[  403.259612] hub 7-0:1.0: USB hub found
[  403.259701] hub 7-0:1.0: 1 port detected
[  403.260561] xhci-hcd xhci-hcd.0.auto: xHCI Host Controller
[  403.261081] xhci-hcd xhci-hcd.0.auto: new USB bus registered, assigned bus number 8
[  403.261260] usb usb8: We don't know the algorithms for LPM for this host, disabling LPM.
[  403.261538] usb usb8: New USB device found, idVendor=1d6b, idProduct=0003
[  403.261563] usb usb8: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[  403.261585] usb usb8: Product: xHCI Host Controller
[  403.261606] usb usb8: Manufacturer: Linux 4.4.126-rockchip-ayufan-260 xhci-hcd
[  403.261626] usb usb8: SerialNumber: xhci-hcd.0.auto
[  403.263171] hub 8-0:1.0: USB hub found
[  403.263256] hub 8-0:1.0: 1 port detected
[  403.264005] rockchip-dwc3 usb@fe800000: USB HOST connected
[  404.129018] usb 7-1: new high-speed USB device number 2 using xhci-hcd
[  404.248587] usb 7-1: New USB device found, idVendor=2109, idProduct=0715
[  404.248622] usb 7-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[  404.248644] usb 7-1: Product: VLI Product String
[  404.248665] usb 7-1: Manufacturer: VLI Manufacture String
[  404.248686] usb 7-1: SerialNumber: 000000123ADA
[  404.288329] usbcore: registered new interface driver usb-storage
[  404.298266] scsi host0: uas
[  404.299206] usbcore: registered new interface driver uas
[  404.757765] scsi 0:0:0:0: Direct-Access     Samsung  SSD 840 EVO      EXT0 PQ: 0 ANSI: 6
[  404.762741] sd 0:0:0:0: [sda] 234441648 512-byte logical blocks: (120 GB/112 GiB)
[  404.765171] sd 0:0:0:0: [sda] Write Protect is off
[  404.765212] sd 0:0:0:0: [sda] Mode Sense: 2f 00 00 00
[  404.765884] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[  404.803671]  sda: sda1
[  404.809561] sd 0:0:0:0: [sda] Attached SCSI disk
[  408.951063] fusb302 4-0022: PD disabled
[  457.442012] usb 7-1: stat urb: status -71
[  457.442444] usb 7-1: cmd cmplt err -71
[  457.444001] usb 7-1: USB disconnect, device number 2
[  457.444748] sd 0:0:0:0: [sda] tag#0 uas_zap_pending 0 uas-tag 1 inflight: CMD
[  457.444782] sd 0:0:0:0: [sda] tag#0 CDB: opcode=0x28 28 00 0d f9 4b 00 00 00 08 00
[  457.444848] sd 0:0:0:0: [sda] tag#0 UNKNOWN(0x2003) Result: hostbyte=0x01 driverbyte=0x00
[  457.444881] sd 0:0:0:0: [sda] tag#0 CDB: opcode=0x28 28 00 0d f9 4b 00 00 00 08 00
[  457.444900] blk_update_request: I/O error, dev sda, sector 234441472
[  457.462250] sd 0:0:0:0: [sda] Synchronizing SCSI cache
[  457.551899] sd 0:0:0:0: [sda] Synchronize Cache(10) failed: Result: hostbyte=0x07 driverbyte=0x00
[  457.772942] usb 7-1: new full-speed USB device number 3 using xhci-hcd
[  457.976941] usb 7-1: new high-speed USB device number 4 using xhci-hcd
[  458.097502] usb 7-1: New USB device found, idVendor=2109, idProduct=0715
[  458.097535] usb 7-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[  458.097557] usb 7-1: Product: VLI Product String
[  458.097578] usb 7-1: Manufacturer: VLI Manufacture String
[  458.097598] usb 7-1: SerialNumber: 000000123ADA
[  458.104490] scsi host1: uas
[  458.113625] scsi 1:0:0:0: Direct-Access     Samsung  SSD 840 EVO      EXT0 PQ: 0 ANSI: 6
[  458.117903] sd 1:0:0:0: [sda] 234441648 512-byte logical blocks: (120 GB/112 GiB)
[  458.120063] sd 1:0:0:0: [sda] Write Protect is off
[  458.120100] sd 1:0:0:0: [sda] Mode Sense: 2f 00 00 00
[  458.120754] sd 1:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[  458.130105]  sda: sda1
[  458.134132] sd 1:0:0:0: [sda] Attached SCSI disk
[  620.096945] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null)
[  868.072983] usb 7-1: USB disconnect, device number 4
[  868.076569] sd 1:0:0:0: [sda] Synchronizing SCSI cache
[  868.086621] fusb302 4-0022: connection has disconnected
[  868.096288] xhci-hcd xhci-hcd.0.auto: remove, state 4
[  868.096358] usb usb8: USB disconnect, device number 1
[  868.097925] xhci-hcd xhci-hcd.0.auto: USB bus 8 deregistered
[  868.098356] xhci-hcd xhci-hcd.0.auto: remove, state 1
[  868.098406] usb usb7: USB disconnect, device number 1
[  868.168645] sd 1:0:0:0: [sda] Synchronize Cache(10) failed: Result: hostbyte=0x07 driverbyte=0x00
[  868.184364] xhci-hcd xhci-hcd.0.auto: USB bus 7 deregistered
[  868.185454] rockchip-dwc3 usb@fe800000: USB unconnected
[  891.965818] fusb302 4-0022: CC connected in CC2 as DFP
[  891.986804] xhci-hcd xhci-hcd.0.auto: xHCI Host Controller
[  891.987453] xhci-hcd xhci-hcd.0.auto: new USB bus registered, assigned bus number 7
[  891.988318] xhci-hcd xhci-hcd.0.auto: hcc params 0x0220fe64 hci version 0x110 quirks 0x02030010
[  891.988393] xhci-hcd xhci-hcd.0.auto: irq 223, io mem 0xfe800000
[  891.989071] usb usb7: New USB device found, idVendor=1d6b, idProduct=0002
[  891.989098] usb usb7: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[  891.989120] usb usb7: Product: xHCI Host Controller
[  891.989141] usb usb7: Manufacturer: Linux 4.4.126-rockchip-ayufan-260 xhci-hcd
[  891.989162] usb usb7: SerialNumber: xhci-hcd.0.auto
[  891.991298] hub 7-0:1.0: USB hub found
[  891.991398] hub 7-0:1.0: 1 port detected
[  891.992763] xhci-hcd xhci-hcd.0.auto: xHCI Host Controller
[  891.993275] xhci-hcd xhci-hcd.0.auto: new USB bus registered, assigned bus number 8
[  891.993476] usb usb8: We don't know the algorithms for LPM for this host, disabling LPM.
[  891.994163] usb usb8: New USB device found, idVendor=1d6b, idProduct=0003
[  891.994191] usb usb8: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[  891.994213] usb usb8: Product: xHCI Host Controller
[  891.994234] usb usb8: Manufacturer: Linux 4.4.126-rockchip-ayufan-260 xhci-hcd
[  891.994254] usb usb8: SerialNumber: xhci-hcd.0.auto
[  891.996464] hub 8-0:1.0: USB hub found
[  891.996878] hub 8-0:1.0: 1 port detected
[  891.998206] rockchip-dwc3 usb@fe800000: USB HOST connected
[  892.779677] usb 8-1: new SuperSpeed USB device number 2 using xhci-hcd
[  892.798460] usb 8-1: New USB device found, idVendor=2109, idProduct=0715
[  892.798658] usb 8-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[  892.798682] usb 8-1: Product: VLI Product String
[  892.798703] usb 8-1: Manufacturer: VLI Manufacture String
[  892.798724] usb 8-1: SerialNumber: 000000123ADA
[  892.807943] scsi host2: uas
[  897.639594] fusb302 4-0022: PD disabled
[  898.849916] scsi 2:0:0:0: Direct-Access     Samsung  SSD 840 EVO      EXT0 PQ: 0 ANSI: 6
[  898.854270] sd 2:0:0:0: [sda] 234441648 512-byte logical blocks: (120 GB/112 GiB)
[  898.856226] sd 2:0:0:0: [sda] Write Protect is off
[  898.856262] sd 2:0:0:0: [sda] Mode Sense: 2f 00 00 00
[  898.857002] sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[  898.857234] xhci-hcd xhci-hcd.0.auto: ERROR Transfer event for disabled endpoint or incorrect stream ring
[  898.858136] xhci-hcd xhci-hcd.0.auto: @00000000df938420 00000000 00000000 1b000000 010b8001
[  898.870570]  sda: sda1
[  898.874488] sd 2:0:0:0: [sda] Attached SCSI disk
[  921.561941] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null)
[  921.920142] xhci-hcd xhci-hcd.0.auto: ERROR Transfer event for disabled endpoint or incorrect stream ring
[  921.921053] xhci-hcd xhci-hcd.0.auto: @00000000df938f70 00000000 00000000 1b000000 010c8000
[ 1064.779938] sd 2:0:0:0: [sda] tag#0 data cmplt err -71 uas-tag 1 inflight: CMD
[ 1064.779981] sd 2:0:0:0: [sda] tag#0 CDB: opcode=0x2a 2a 00 06 c4 14 60 00 00 38 00
[ 1072.327788] scsi host2: uas_pre_reset: timed out
[ 1072.328362] xhci-hcd xhci-hcd.0.auto: ERROR Transfer event for disabled endpoint or incorrect stream ring
[ 1072.329249] xhci-hcd xhci-hcd.0.auto: @00000000df938290 00000000 00000000 1b000000 010f8001
[ 1072.330269] sd 2:0:0:0: [sda] tag#0 uas_zap_pending 0 uas-tag 1 inflight: CMD
[ 1072.330318] sd 2:0:0:0: [sda] tag#0 CDB: opcode=0x2a 2a 00 06 c4 14 60 00 00 38 00
[ 1072.330484] sd 2:0:0:0: [sda] tag#0 UNKNOWN(0x2003) Result: hostbyte=0x01 driverbyte=0x00
[ 1072.330514] sd 2:0:0:0: [sda] tag#0 CDB: opcode=0x2a 2a 00 06 c4 14 60 00 00 38 00
[ 1072.330535] blk_update_request: I/O error, dev sda, sector 113513568
[ 1072.339134] Aborting journal on device sda1-8.
[ 1072.339729] JBD2: Error -5 detected when updating journal superblock for sda1-8.
[ 1072.347374] sd 2:0:0:0: [sda] Synchronizing SCSI cache
[ 1072.437554] sd 2:0:0:0: [sda] Synchronize Cache(10) failed: Result: hostbyte=0x07 driverbyte=0x00
[ 1072.799894] usb 8-1: reset SuperSpeed USB device number 2 using xhci-hcd
[ 1072.823055] scsi host3: uas
[ 1073.938624] EXT4-fs error (device sda1): ext4_find_entry:1454: inode #2: comm bash: reading directory lblock 0
[ 1073.943072] EXT4-fs warning (device sda1): htree_dirblock_to_tree:958: inode #2: lblock 0: comm bash: error -5 reading directory block
[ 1074.516824] EXT4-fs warning (device sda1): htree_dirblock_to_tree:958: inode #2: lblock 0: comm bash: error -5 reading directory block
[ 1093.812445] scsi 3:0:0:0: tag#0 uas_eh_abort_handler 0 uas-tag 1 inflight: CMD IN
[ 1093.812457] scsi 3:0:0:0: tag#0 CDB: opcode=0x12 12 00 00 00 24 00
[ 1093.812554] xhci-hcd xhci-hcd.0.auto: ERROR Transfer event for disabled endpoint or incorrect stream ring
[ 1093.813453] xhci-hcd xhci-hcd.0.auto: @00000000df938450 00000000 00000000 1b000000 010b8001
[ 1093.814833] scsi host3: uas_eh_bus_reset_handler start
[ 1093.814919] xhci-hcd xhci-hcd.0.auto: ERROR Transfer event for disabled endpoint or incorrect stream ring
[ 1093.815803] xhci-hcd xhci-hcd.0.auto: @00000000df938470 00000000 00000000 1b000000 010f8001
[ 1093.918840] usb 8-1: reset SuperSpeed USB device number 2 using xhci-hcd
[ 1093.936104] scsi host3: uas_eh_bus_reset_handler success
[ 1093.939690] scsi 3:0:0:0: Direct-Access     Samsung  SSD 840 EVO      EXT0 PQ: 0 ANSI: 6
[ 1093.942581] sd 3:0:0:0: [sdb] 234441648 512-byte logical blocks: (120 GB/112 GiB)
[ 1093.943888] sd 3:0:0:0: [sdb] Write Protect is off
[ 1093.943899] sd 3:0:0:0: [sdb] Mode Sense: 2f 00 00 00
[ 1093.944318] sd 3:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 1093.944485] xhci-hcd xhci-hcd.0.auto: ERROR Transfer event for disabled endpoint or incorrect stream ring
[ 1093.945417] xhci-hcd xhci-hcd.0.auto: @00000000df938860 00000000 00000000 1b000000 010b8001
[ 1093.954610]  sdb: sdb1
[ 1093.958554] sd 3:0:0:0: [sdb] Attached SCSI disk
[ 1094.677483] usb 8-1: reset SuperSpeed USB device number 2 using xhci-hcd
[ 1097.410606] EXT4-fs error (device sda1): ext4_find_entry:1454: inode #2: comm bash: reading directory lblock 0
[ 1097.415203] EXT4-fs error (device sda1): ext4_find_entry:1454: inode #2: comm bash: reading directory lblock 0
[ 1098.925048] usb 8-1: reset SuperSpeed USB device number 2 using xhci-hcd
[ 1102.647063] usb 8-1: reset SuperSpeed USB device number 2 using xhci-hcd
[ 1107.945060] usb 8-1: reset SuperSpeed USB device number 2 using xhci-hcd
[ 1108.609097] usb 8-1: reset SuperSpeed USB device number 2 using xhci-hcd
[ 1109.325098] usb 8-1: reset SuperSpeed USB device number 2 using xhci-hcd
[ 1109.900772] usb 8-1: Device not responding to setup address.
[ 1110.101720] usb 8-1: Device not responding to setup address.
[ 1110.302645] usb 8-1: device not accepting address 2, error -71
[ 1110.303212] xhci-hcd xhci-hcd.0.auto: Cannot set link state.
[ 1110.303259] usb usb8-port1: cannot disable (err = -32)
[ 1110.660095] usb 8-1: reset SuperSpeed USB device number 2 using xhci-hcd
[ 1112.294113] usb 8-1: reset SuperSpeed USB device number 2 using xhci-hcd
[ 1113.732949] usb 8-1: reset SuperSpeed USB device number 2 using xhci-hcd
[ 1115.000729] EXT4-fs error (device sda1): ext4_find_entry:1454: inode #2: comm iozone: reading directory lblock 0
[ 1115.001754] EXT4-fs error (device sda1): ext4_read_inode_bitmap:223: comm iozone: Cannot read inode bitmap - block_group = 0, inode_bitmap = 1055
[ 1115.003048] EXT4-fs error (device sda1): ext4_journal_check_start:56: Detected aborted journal
[ 1115.003911] EXT4-fs (sda1): Remounting filesystem read-only
[ 1119.011110] usb 8-1: reset SuperSpeed USB device number 2 using xhci-hcd