DAP1620B1-vendor-init-log

 init started:  BusyBox v1.01 (2020.11.09-03:14+0000) multi-call binary
 Algorithmics/MIPS FPU Emulator v1.5
 devpts: called with bogus options
 init NVRAM_SPACE from mtdblock size
 init nvram memory map size: 0x10000 order of pages: 0x4
 nvram module init:
 	/dev/nvram major number 225 glues to mtd: "nvram" size: 0x00010000
 	nvram_space: 0x00010000 mapped via mmap(2)
 read_mp_info: read 65536 data from /dev/mtdblock3 successfully
 nvram_sanity_check: ...key: ap_wlan0_5g_dfs_enable="1"
 [nvram_sanity_check/384]: restore key: ap_wlan0_5g_dfs_enable="0"
 nvram_sanity_check: ...key: wlan0_5g_dfs_enable="1"
 [nvram_sanity_check/384]: restore key: wlan0_5g_dfs_enable="0"
 MT7621 login:  ((((===== [init_network] start [181] =====))))
 Set: phy[1].reg[0] = 3900
 Set: phy[2].reg[0] = 3900
 Set: phy[3].reg[0] = 3900
 Set: phy[4].reg[0] = 3900
 FFFFFFA0:FFFFFFA3:FFFFFFF0:FFFFFF91: 5:FFFFFFD0
 Raeth v3.1 (Tasklet,SkbRecycle)
 set CLK_CFG_0 = 0x40a00020!!!!!!!!!!!!!!!!!!1
 phy_free_head is 0xc00000!!!
 phy_free_tail_phy is 0xc01ff0!!!
 txd_pool=a0c08000 phy_txd_pool=00C08000
 ei_local->skb_free start address is 0x87eb26cc.
 free_txd: 00c08010, ei_local->cpu_ptr: 00C08000
  POOL  HEAD_PTR | DMA_PTR | CPU_PTR
 ----------------+---------+--------
      0xa0c08000 0x00C08000 0x00C08000

 phy_qrx_ring = 0x00c02000, qrx_ring = 0xa0c02000

 phy_rx_ring0 = 0x00c04000, rx_ring[0] = 0xa0c04000
 MT7530 Reset Completed!!
 change HW-TRAP to 0x17c8f
 set LAN/WAN LLLLW
 GMAC1_MAC_ADRH -- : 0x0000a0a3
 GMAC1_MAC_ADRL -- : 0xzzzzzzzz
 CDMA_CSG_CFG = 81000000
 GDMA1_FWD_CFG = 20710000
 br0: Cannot assign requested address
 IPv6: ADDRCONF(NETDEV_UP): br0: link is not ready
 br0: Cannot assign requested address
 device eth2 entered promiscuous mode
 br0: port 1(eth2) entered forwarding state
 br0: port 1(eth2) entered forwarding state
 IPv6: ADDRCONF(NETDEV_CHANGE): br0: link becomes ready
 IPv6: ADDRCONF(NETDEV_UP): lo: link is not ready
 IPv6: ADDRCONF(NETDEV_UP): sit0: link is not ready
 switch reg write offset=a0, value=1
 REG_ESW_WT_MAC_ATC is 0x7ff0002

 done.
 killall: syslogd: no process killed
 killall: klogd: no process killed
 [[**]]set nvram system_time  2020/11/09/03/22
 [[**]]set system_time as 110903222020
 Mon Nov  9 03:22:00 UTC 2020
 Generating a 2048 bit RSA private key
 ....................................+++
 ........+++
 unable to write 'random state'
 writing new private key to '/tmp/etc/ssl/server.pem'
 -----
 /tmp/password has been created
 2020-11-09 03:22:13: (network.c.247) warning: please use server.use-ipv6 only for hostnames, not without server.bind / empty address; your config will break if the kernel default for IPV6_V6ONLY changes
 checksum=0xE796E092
 default_stat=1
 ===============DUTinfo_file detail=============
 [Type]0x0001[Length]8[Value]DAP-1620
 [Type]0x0002[Length]2[Value]B1
 [Type]0x0004[Length]1[Value]1
 [Type]0x0005[Length]7[Value]2.12b03
 [Type]0x0009[Length]17[Value]a0:a3:f0:91:zz:zz
 [Type]0x000A[Length]17[Value]a0:a3:f0:91:zz:zz
 [Typenvram_commit: size crc 10000 erasesize:10000, nvram->size: 81360000
 ]0x000B[Length]17[Value]a0:a3:f0:91:zz:zw
 [Type]0x000C[Length]4[Value]0x07
 [Type]0x0010[Length]10[Value]dlink-zzzz
 [Type]0x0011[Length]15[Value]dlink-zzzz-5GHz
 [Type]0x0012[Length]10[Value]zzzzzzzzzz
 [Type]0x0013[Length]0[Value]
 [Type]0x0014[Length]10[Value]0xE796E092
 [Type]0x0018[Length]0[Value]
 [Type]0x001A[Length]12[Value]202111816089
 [Type]0x001C[Length]64[Value]ee8ad611d11f0a09cd82fb62fc15042a6590a36615adb881560ae4a48691a0ab
 [Type]0x001D[Length]32[Value]44b6e9ad5c5742f4af35348acf83c5dd
 [Type]0x001E[Length]32[Value]e028526a2a3b425a010049a28691210c
 [Type]0x000D[Length]9[Value]/var/tmp/
 [Type]0x000E[Length][Value]

 ===== [main_loop/1115] not provisioned =====
 [set_wlan_basic/1822]: >>>> security_mode[2]
 [set_wlan_basic/1823]: >>>> security_mode_1[2]
 [set_wlan_basic/1824]: >>>> security_mode_2[2]
 [set_wlan_basic/1825]: >>>> security_mode_3[2]
 [set_wlan_basic/1832]: >>>> cipher_type_mode[2]
 [set_wlan_basic/1833]: >>>> cipher_type_mode_1[2]
 [set_wlan_basic/1834]: >>>> cipher_type_mode_2[2]
 [set_wlan_basic/1835]: >>>> cipher_type_mode_3[2]
 [set_5G_wlan_basic/344]: >>>> security_mode[2]
 [set_5G_wlan_basic/345]: >>>> security_mode_1[2]
 [set_5G_wlan_basic/346]: >>>> security_mode_2[2]
 [set_5G_wlan_basic/347]: >>>> security_mode_3[2]
 [set_5G_wlan_basic/354]: >>>> cipher_type_mode[2]
 [set_5G_wlan_basic/355]: >>>> cipher_type_mode_1[2]
 [set_5G_wlan_basic/356]: >>>> cipher_type_mode_2[2]
 [set_5G_wlan_basic/357]: >>>> cipher_type_mode_3[2]
 check_wlan_module: ===== wlan_module[] =====
 insert_wlan_module: <<<<<<<===== check_wlan_module()[0] =====>>>>>>>
 check_wlan_module: ===== wlan_module[] =====
 ChipOpsMCUHook
 [MTWF][dlink_mesh_check_data_struct]: check data structure: PASS
 [MTWF][mesh_module_init]: init hook functions.
 meshm: module license 'Proprietary' taints kernel.
 Disabling lock debugging due to kernel taint
 [mesh module] D-Link mesh module init. version v1.0.2f (d6c157e1).
 ------------ smp.sh wifi ------------
 sh: cannot create /sys/devices/virtual/net/rax0/queues/rx-0/rps_cpus: Directory nonexistent
 sh: cannot create /sys/devices/virtual/net/apcli0/queues/rx-0/rps_cpus: Directory nonexistent
 sh: cannot create /sys/devices/virtual/net/apclix0/queues/rx-0/rps_cpus: Directory nonexistent
 efuse_probe: efuse = 10000212
 MT7615BBPInit():BBP Initialization.....
 	Band 0: valid=1, isDBDC=0, Band=2, CBW=1, CentCh/PrimCh=1/1, prim_ch_idx=0, txStream=2
 	Band 1: valid=0, isDBDC=0, Band=0, CBW=0, CentCh/PrimCh=0/0, prim_ch_idx=0, txStream=0
 RTMPSetLEDStatus: before AndesLedEnhanceOP , status=1, LED_CMD=2!
 AndesLedEnhanceOP: Success!
 bulklisten(create_socket@151): Local IP: 192.168.0.50
 device ra0 entered promiscuous mode
 br0: port 2(ra0) entered forwarding state
 br0: port 2(ra0) entered forwarding state
 device ra1 entered promiscuous mode
 device apcli0 entered promiscuous mode
 br0: port 4(apcli0) entered forwarding state
 br0: port 4(apcli0) entered forwarding state
 device rax0 entered promiscuous mode
 br0: port 5(rax0) entered forwarding state
 br0: port 5(rax0) entered forwarding state
 device rax1 entered promiscuous mode
 device apclix0 entered promiscuous mode
 br0: port 7(apclix0) entered forwarding state
 br0: port 7(apclix0) entered forwarding state
 rax0      mac:[0x12218]:e8afc3a0
 ra0       mac:[0x12218]:e8afc2a0


 start_wlan: Repeater mode

 killall: repeater_monitor: no process killed
 [start_wlan/3866]: mesh_domain[none]
 [[[[=== repeater_monitor_main Start...===]]]]
 killall: apmode_monitor: no process killed
 killall: mesh_monitor: no process killed
 [start_wlan/3878]: mesh_domain[none]
 [[[[=== apmode_monitor_main Start...===]]]]
 RC_IS_BUSY sleep(1)
 RC_IS_BUSY sleep(1)
 Start IPv6 dhclient
 Start APP
 restart_ap_iface: ===== start =====
 br0: port 5(rax0) entered disabled state
 RC_IS_BUSY sleep(1)
 RC_IS_BUSY sleep(1)
 repeater_monitor.c check bulklisten break.....
 br0: port 5(rax0) entered forwarding state
 br0: port 5(rax0) entered forwarding state
 RC_IS_BUSY sleepbr0: port 2(ra0) entered disabled state
 (1)
 killall: udhcpc: no process killed


  -------------- stop_dhcpc UP --------
 SIOCSIFFLAGS: Cannot assign requested address
 rm: cannot remove `/var/tmp/previous_dn': No such file or directory
 rm: cannot remove `/var/tmp/previous_dns': No such file or directory
 rm: cannot remove `/var/tmp/m_flag': No such file or directory
 rm: cannot remove `/var/tmp/o_flag': No such file or directory
 RTNETLINK answers: No such file or directory
 cat: /var/etc/resolv_ipv4.conf: No such file or directory
 Stop IPv6 rdnssd
 Stop IPv6 dhclient
 sh: cannot create /proc/sys/net/ipv6/conf/br0/disable_ipv6: Directory nonexistent
 RC_IS_BUSY sleep(1)
 Start IPv6 dhclient


  -------------- start_backup_dhcpd() --------
 killall: udhcpc: no process killed
 killall: udhcpd: no process killed
 DHCP server start.
 device_lan_ip=192.168.0.50 , device_lan_subnet_mask=255.255.255.0
 max_leases value (254) not sane, setting to 20 instead
 Nov  9 03:22:54 udhcpd[733]: max_leases value (254) not sane, setting to 20 instead

 Unable to open /var/misc/udhcpd.leases for reading
 Nov  9 03:22:54 udhcpd[733]: Unable to open /var/misc/udhcpd.leases for reading

 killall: dnsmasq: no process killed
 [avahi_restart/324] -----avahi_restart-----
 Failed to kill daemon: No such file or directory
 [avahi_restart/324] -----avahi_restart-----
 Failed to kill daemon: No such file or directory
 br0: port 2(ra0) entered forwarding state
 br0: port 2(ra0) entered forwarding state
 restart_ap_iface: ===== end =====
 RC_IS_BUSY sleep(1)
 [ntp_start/11] -----ntp_start-----
 ntp1.dlink.com: Unknown host
 ntp1.dlink.com: Unknown host
 /tmp/password has been created
 [avahi_start/301] -----avahi_start-----
 2020-11-09 03:22:55: (network.c.247) warning: please use server.use-ipv6 only for hostnames, not without server.bind / empty address; your config will break if the kernel default for IPV6_V6ONLY changes
 [start_bndstrg/2130] wlan1_ssid[]
 [start_bndstrg/2131] wlan0_ssid[dlink-zzzz]
 [03:22:55][main]Initialize bndstrg
 [03:22:55][driver_wext_init]Initialize ralink wext interface
 [03:22:55][bndstrg_run]bndstrg_run[4923]:start
 RC_IS_BUSY sleep(1)
 RC_IS_BUSY sleep(1)
 [03:22:57][bndstrg_periodic_exec]bndstrg->state=BNDSTRG_INF_POLL
 [03:22:57][bndstrg_table_en_polling]bndstrg=0x427460,table=0x427758,en=0
 [03:22:57][bndstrg_inf_status_polling]
 [bndstrg_inf_status_polling]inf_name:[rax0]
 [03:22:57][bndstrg_inf_status_polling]
 [bndstrg_inf_status_polling]inf_name:[ra0]
 [03:22:57][bndstrg_ctrl_interface_update]Rx INF STATUS RSP for inf(rax0): 1
 [03:22:57][bndstrg_ctrl_interface_update]Rx INF STATUS RSP for inf(ra0): 1
 RC_IS_BUSY sleep(1)
 [APSON-VENDER][apson_sb_init_apson 2562]init apson!
 [APSON-VENDER][apson_sb_set_apson 2671]set apson!
 [APSON-VENDER][apson_sb_set_apson 2672]domain = none
 [APSON-VENDER][apson_sb_set_apson 2673]ssid = mesh_91ZZZZ
 [APSON-VENDER][apson_sb_set_apson 2674]security_mode = 3
 [APSON-VENDER][apson_sb_set_apson 2675]encryption_mode = 4
 [APSONnvram_commit: size crc 10000 erasesize:10000, nvram->size: 81360000
 -VENDER][apson_sb_set_apson 2676]psk = 94a0b6b8
 pSetting_apson->psk [94a0b6b8]
 [APSON-VENDER][apson_sb_set_apson 2748]========== set mesh_domain! ==========
 [APSON-VENDER][apson_sb_set_apson 2751]========== set mesh_domain! ==========
 [APSON-VENDER][apson_sb_get_wlan_all 2062]Get wlan!
 [APSON-VENDER][apson_sb_get_wlan_all 2465]Get wlan end...!
 [APSON-VENDER][apson_sb_get_schedule_rule 1783]Get schedule rule!
 [APSON-VENDER][apson_sb_get_managed_device 1915]Get managed device!
 [APSON-VENDER][apson_sb_get_wps 1936]Get wps!
 [APSON-VENDER][apson_sb_RC_IS_BUSY sleep(1)
 [03:22:59][bndstrg_periodic_exec]bndstrg->state=BNDSTRG_TBL_EN
 [03:22:59][bndstrg_table_en_polling]bndstrg=0x427460,table=0x427758,en=1
 DAP-1620 login: RC_IS_BUSY sleep(1)
 [03:23:00][bndstrg_table_en_polling]bndstrg=0x427460,table=0x427758,en=1
 [mesh module][dlink_nl_ctrl_recv]: DLINK_NL_APSON_REG set pid=856
 RC_IS_BUSY sleep(1)
 [03:23:01][bndstrg_periodic_exec]bndstrg->state=BNDSTRG_TBL_READY DUALBAND
 RC_IS_BUSY sleep(1)
 cat: /fota/FOTA_result: No such file or directory
 link_down()...
 killall: udhcpc: no process killed
 Nov  9 03:23:03 udhcpd[736]: UDHCPD Received a SIGTERM

 DHCP server start.
 device_lan_ip=192.168.0.50 , device_lan_subnet_mask=255.255.255.0
 max_leases value (254) not sane, setting to 20 instead
 Nov  9 03:23:03 udhcpd[897]: max_leases value (254) not sane, setting to 20 instead

 Unable to open /var/misc/udhcpd.leases for reading
 Nov  9 03:23:03 udhcpd[897]: Unable to open /var/misc/udhcpd.leases for reading

 [avahi_restart/324] -----avahi_restart-----

 Login timed out DAP-1620 login: falling ...down
 raising ...up

 Login timed ouDAP-1620 login: falling ...down
 raising ...up
 raising ...up

 Login timed ouDAP-1620 login: falling ...down
 raising ...up
 raising ...up
 raising ...up
 falling ...down
 falling ...down
 raising ...up
 falling ...down
 raising ...up
 falling ...down
 raising ...up
 br0: port 7(apclix0) entered disabled state
 br0: port 5(rax0) entered disabled state
 [03:26:51][bndstrg_ctrl_interfacbr0: port 4(apcli0) entered disabled state
 e_update]Rx INF STATUS RSP for inf(rax0): 0
 RTMPSetLEDStatus: before AndesLedEnhanceOP , status=0, LED_CMD=0!
 AndesLedEnhanceOP: Success!
 RTMPSetLEDStatus: before AndesLedEnhanceOP , status=0, LED_CMD=0!
 AndesLedEnhanceOP: Success!
 RTMPSetLEDStatus: before AndesLedEnhanceOP , status=4, LED_CMD=1!
 AndesLedEnhanceOP: Success!
 RTMPSetLEDStatus: before AndesLedEnhanceOP , status=2, LED_CMD=1!
 AndesLedEnhanceOP: Success!
 br0: port 2(ra0) entered disabled state
 [03:26:52][bndstrg_ctrl_interface_update]Rx INF STATUS RSP for inf(ra0): 0
 [03:26:52][bndstrg_periodic_exec]bndstrg->state=BNDSTRG_INF_POLL
 [03:26:52][bndstrg_table_en_polling]bndstrg=0x427460,table=0x427758,en=0
 [03:26:52][bndstrg_inf_status_polling]
 [bndstrg_inf_status_polling]inf_name:[rax0]
 [03:26:52][driver_wext_set_oid] oid=0x950 len (80) failed
 [03:26:52][bndstrg_inf_status_polling]
 [bndstrg_inf_status_polling]inf_name:[ra0]
 [03:26:53][bndstrg_inf_status_polling]
 [bndstrg_inf_status_polling]inf_name:[rax0]
 [03:26:53][driver_wext_set_oid] oid=0x950 len (80) failed
 [03:26:53][bndstrg_inf_status_polling]
 [bndstrg_inf_status_polling]inf_name:[ra0]
 nvram_restore_default_main: Restore to default!!
 [03:26:54][bndstrg_inf_status_polling]
 [bndstrg_inf_status_polling]inf_name:[rax0]
 [03:26:54][driver_wext_set_oid] oid=0x950 len (80) failed
 [03:26:54][bndstrg_inf_status_polling]
 [bndstrg_inf_status_polling]inf_name:[ra0]
 [03:26:55][bndstrg_inf_status_polling]
 [bndstrg_inf_status_polling]inf_name:[rax0]
 [03:26:55][driver_wext_set_oid] oid=0x950 len (80) failed
 [03:26:55][bndstrg_inf_status_polling]
 [bndstrg_inf_status_polling]inf_name:[ra0]
 [03:26:56][bndstrg_inf_status_polling]
 [bndstrg_inf_status_polling]inf_name:[rax0]
 [03:26:56][driver_wext_set_oid] oid=0x950 len (80) failed
 [03:26:56][bndstrg_inf_status_polling]
 [bndstrg_inf_status_polling]inf_name:[ra0]
 SIGTERM: signalling REBOOT
 [03:26:57][bndstrg_inf_status_polling]
 [bndstrg_inf_status_polling]inf_name:[rax0]
 [03:26:57][driver_wext_set_oid] oid=0x950 len (80) failed
 [03:26:57][bndstrg_inf_status_polling]
 [bndstrg_inf_status_polling]inf_name:[ra0]
 [03:26:58][bndstrg_inf_status_polling]
 [bndstrg_inf_status_polling]inf_name:[rax0]
 [03:26:58][driver_wext_set_oid] oid=0x950 len (80) failed
 [03:26:58][bndstrg_inf_status_polling]
 [bndstrg_inf_status_polling]inf_name:[ra0]
 [03:26:59][bndstrg_inf_status_polling]
 [bndstrg_inf_status_polling]inf_name:[rax0]
 [03:26:59][driver_wext_set_oid] oid=0x950 len (80) failed
 [03:26:59][bndstrg_inf_status_polling]
 [bndstrg_inf_status_polling]inf_name:[ra0]
 umount: cannot umount /sys: Device or resource busy
 umount: cannot umlighttpd-angel.c.140: child (pid=794) exited normally with exitcode: 0

 Sending SIGK
 Please stand by while rebooting the system.
 Restarting system.