\00\00\00\00\00[PLL] mempll_init


DRAM Operation Data Rate: DDR-1163


[PLL] mempll_cali


[PWRAP] pwrap_init_preloader


[PWRAP] the reset register =80


[PWRAP] PMIC_WRAP_STAUPD_GRPEN =0x0,it should be equal to 0xc


[PWRAP] _pwrap_init_sidly [Read Test] pass,index=0 rdata=5AA5


[PWRAP] _pwrap_init_sidly [Read Test] pass,index=1 rdata=5AA5


[PWRAP] _pwrap_init_sidly [Read Test] pass,index=2 rdata=5AA5


[PWRAP] _pwrap_init_sidly [Read Test] pass,index=3 rdata=5AA5


[PWRAP] _pwrap_init_sidly [Read Test] pass,index=4 rdata=5AA5


[PWRAP] _pwrap_init_sidly [Read Test] pass,index=5 rdata=5AA5


[PWRAP] _pwrap_init_sidly [Read Test] pass,index=6 rdata=5AA5


[PWRAP] _pwrap_init_sidly [Read Test] pass,index=7 rdata=5AA5


[PWRAP] _pwrap_init_sidly [Read Test] fail,index=8,rdata=AD52


[PWRAP] _pwrap_init_sidly [Read Test] fail,index=9,rdata=AD52


[PWRAP] _pwrap_init_sidly [Read Test] fail,index=10,rdata=AD52


[PWRAP] _pwrap_init_sidly [Read Test] fail,index=11,rdata=AD52


[PWRAP] _pwrap_init_sidly [Read Test] fail,index=12,rdata=AD52


[PWRAP] _pwrap_init_sidly [Read Test] fail,index=13,rdata=AD52


[PWRAP] _pwrap_init_sidly [Read Test] fail,index=14,rdata=AD52


[PWRAP] _pwrap_init_sidly [Read Test] fail,index=15,rdata=AD52


[PWRAP] _pwrap_init_sidly [Read Test] fail,index=16,rdata=D6A9


[PWRAP] _pwrap_init_sidly [Read Test] fail,index=17,rdata=D6A9


[PWRAP] _pwrap_init_sidly [Read Test] fail,index=18,rdata=D6A9


[PWRAP] _pwrap_init_sidly [Read Test] fail,index=19,rdata=D6A9


[PWRAP] _pwrap_init_sidly [Read Test] fail,index=20,rdata=D6A9


[PWRAP] _pwrap_init_sidly [Read Test] fail,index=21,rdata=D6A9


[PWRAP] _pwrap_init_sidly [Read Test] fail,index=22,rdata=D6A9


[PWRAP] _pwrap_init_sidly [Read Test] fail,index=23,rdata=D6A9


[PMIC_WRAP]wrap_init pass,the return value=0.


[I2C-PL] mt_i2c(0)_power_ctl (1)


 [I2C-PL] mt_i2c(0)_power_ctl enable


 [pmic_init] Start..................


[pmic_init] Enable PMIC RST function (depends on main chip RST function) Reg[0x126]=0x453


Reg[0x222]=0x3021


Reg[0x248]=0x3001


[PMIC_INIT_SETTING_V1] Done


[mt6311_driver_probe] PL I2C_EXT_BUCK_CHANNEL=1.


[update_mt6311_chip_id] id_l=0x1, id_r=0x20, id=0x120


[mt6311_get_chip_id] g_mt6311_cid=0x120


[mt6311_get_chip_id] g_mt6311_cid=0x120


[mt6311_hw_component_detect] exist=1


[0x0]=0x1 [0x1]=0x20 [0x2]=0x20


[mt6311_hw_reload] before


[0x0]=0x1


[0x1]=0x20


[0x2]=0x20


[0x40]=0xD3


[0x41]=0x11


[0x84]=0x0


[0x7C]=0x3A





[mt6311_hw_reload] after


[0x0]=0x1


[0x1]=0x20


[0x2]=0x20


[0x40]=0xD3


[0x41]=0x11


[0x84]=0xD


[0x7C]=0x3A


[mt6311_driver_probe] PL g_mt6311_hw_exist=1, g_mt6311_driver_ready=1!!


[pmic_init] Done...................


[PLL] mempll_init


DRAM Operation Data Rate: DDR-1163


[PLL] mempll_cali


[PLL] mt_arm_pll_sel done


[PLFM] Init I2C: OK(0)


[PLFM] Init PWRAP: OK(0)


[PLFM] Init PMIC: OK(0)


[PLFM] chip_ver[101]


[BLDR] Build Time: 20181011_014339


[BLDR] Ver=cbd9508 build@(i3-ri-14-use1a-b-26)


==== Dump RGU Reg ========


RGU MODE:     4D


RGU LENGTH:   FFE0


RGU STA:      0


RGU INTERVAL: FFF


RGU SWSYSRST: 0


==== Dump RGU Reg End ====


RGU: g_rgu_satus:0


 mtk_wdt_mode_config  mode value=10, tmp:22000010


PL P ON


WDT does not trigger reboot


 mtk_wdt_mode_config  mode value=5D, tmp:2200005D


RGU mtk_wdt_init:MTK_WDT_DEBUG_CTL(590200F3)


Enter mtk_kpd_gpio_set!


after set KP enable: KP_SEL = 0x1C70 !


[RTC] bbpu = 0x1, con = 0x407


rtc_2sec_reboot_check: CALI = 0x600


[RTC] irqsta = 0x0, pdn1 = 0x200, pdn2 = 0x201, spar0 = 0x40, spar1 = 0x0


[RTC] new_spare0 = 0x5400, new_spare1 = 0x8001, new_spare2 = 0x4001, new_spare3 = 0x1


[RTC] bbpu = 0x1, con = 0x407


[pmic_detect_powerkey_PL] Release


[PLFM] USB/charger boot!


[RTC] Recored Long Press RST = 0x4101


Just recover from a long pwrkey reset


[RTC] EXT32k Mode


[RTC] EXT32k Mode, DCXO REG Value 0x854=0x2807, 0x85c=0xF07, 0x83e=0xA86A


[RTC] rtc_bbpu_power_on done


[PTP] >> ptp_init()


[PTP] >> get_devinfo()


[PTP] << get_devinfo():347


[PTP] E3 & later IC => chip_sw_ver = 1, E2 IC => chip_sw_ver = 0


[PTP] chip_sw_ver = 1


[PTP] Vcore is tuning down from 1125mV


[PTP] >> ptp_init_det()


[PTP] [ptp_init_det]: det->VBOOT 68


[PTP] << ptp_init_det():440


[PTP] TOP_DCMCTL = 0x00000001


[PTP] >> base_ops_set_phase()


[PTP] << base_ops_set_phase():540


[PTP] >> ptp_isr()


[PTP] >> ptp_isr_handler()


[PTP] [PTP_DET_VCORE_PDN]


[PTP] PTPINTSTS = 1


[PTP] PTP_PTPEN = 1


[PTP] >> handle_init01_isr()


[PTP] @ handle_init01_isr(PTP_DET_VCORE_PDN)


[PTP] PTP_DET_VCORE_PDN: handle_init01_isr: VDN74:0x00000000, VDN30:0x00003339, DCVALUES:0x02760046


[PTP] << handle_init01_isr():707


[PTP] << ptp_isr_handler():898


[PTP] << ptp_isr():936


[PTP] >> mt_ptp_reg_dump()


[PTP] PTP_240[PTP_DET_VCORE_PDN]	= 2760046


[PTP] PTP_218[PTP_DET_VCORE_PDN]	= 5564


[PTP] PTP_26C[PTP_DET_VCORE_PDN]	= 3339


[PTP] PTP_248[PTP_DET_VCORE_PDN]	= 30303A40


[PTP] PTP_238[PTP_DET_VCORE_PDN]	= 0


[PTP] << mt_ptp_reg_dump():678


[PTP] >> base_ops_set_phase()


[PTP] << base_ops_set_phase():540


[PTP] >> ptp_isr()


[PTP] >> ptp_isr_handler()


[PTP] [PTP_DET_VCORE_PDN]


[PTP] PTPINTSTS = 1


[PTP] PTP_PTPEN = 5


[PTP] >> handle_init02_isr()


[PTP] @ handle_init02_isr(PTP_DET_VCORE_PDN)


[PTP] PTP_DET_VCORE_PDN: handle_init02_isr: VOP74:0x30303030, VOP30:0x3030393F, DCVALUES:0x0276FFBA


[PTP] ptp_detectors[PTP_DET_VCORE_PDN].volt_tbl[0] = 3F


[PTP] ptp_detectors[PTP_DET_VCORE_PDN].volt_tbl[1] = 39


[PTP] ptp_detectors[PTP_DET_VCORE_PDN].volt_tbl[2] = 30


[PTP] ptp_detectors[PTP_DET_VCORE_PDN].volt_tbl[3] = 30


[PTP] ptp_detectors[PTP_DET_VCORE_PDN].volt_tbl[4] = 30


[PTP] ptp_detectors[PTP_DET_VCORE_PDN].volt_tbl[5] = 30


[PTP] ptp_detectors[PTP_DET_VCORE_PDN].volt_tbl[6] = 30


[PTP] ptp_detectors[PTP_DET_VCORE_PDN].volt_tbl[7] = 30


[PTP] << handle_init02_isr():757


[PTP] << ptp_isr_handler():898


[PTP] << ptp_isr():936


[PTP] >> mt_ptp_reg_dump()


[PTP] PTP_240[PTP_DET_VCORE_PDN]	= 276FFBA


[PTP] PTP_218[PTP_DET_VCORE_PDN]	= 5564


[PTP] PTP_26C[PTP_DET_VCORE_PDN]	= 3339


[PTP] PTP_248[PTP_DET_VCORE_PDN]	= 3030393F


[PTP] PTP_238[PTP_DET_VCORE_PDN]	= 0


[PTP] << mt_ptp_reg_dump():678


[PTP] PTP set volt: 0x0000003F


[PTP] 0x00000043


[PTP] 0x00000042


[PTP] 0x00000041


[PTP] 0x00000040


[PTP] 0x0000003F


[PTP] M_HW_RES0	= 0x19161617


[PTP] M_HW_RES1	= 0x93AAA9A3


[PTP] M_HW_RES2	= 0x00000000


[PTP] M_HW_RES3	= 0x2E300000


[PTP] M_HW_RES4	= 0x00000003


[PTP] M_HW_RES5	= 0x00585000


[PTP] M_HW_RES6	= 0xCBDEB334


[PTP] M_HW_RES7	= 0x32194F69


[PTP] M_HW_RES8	= 0x2533DAC5


[PTP] M_HW_RES9	= 0x4362684C


[PTP] Right now


[PTP] Vcore is 1093mV


[PTP] axi_sel_clk is 208MHz


[PTP] << ptp_init():1100


[EMI] LPDDR3 NV : Vcore = by PTP, Vmem = 1.225V


[EMI] LPDDR3 MDL search init


DramcPreInit: MR2 = 0x1A, WL = 0x6


DramcPreInit: MR2 = 0x1A, WL = 0x6


[Imp Calibration] Start SW impedance calibration...


[Imp Calibration] Calibration done...DRVP:9


[Imp Calibration] Calibration done...DRVN:9


[Imp Calibration] Reg: 0xB8, Val: 0x99707770


[Imp Calibration] Reg: 0xBC, Val: 0x77706670


[Imp Calibration] Reg: 0xB0, Val: 0x66007700


[Imp Calibration] Reg: 0xB8, Val: 0x99707770


[Imp Calibration] Reg: 0xBC, Val: 0x77706670


[Imp Calibration] Reg: 0xB0, Val: 0x66007700


=========================================


1. [Channel 0] CA training window before adjustment.


x=Pass window CA(max~min) Clk(min~max) center.


y=CA0~CA9


=========================================


CA0     CA(15~0) Clk(0~12) -1


CA1     CA(15~0) Clk(0~12) -1


CA2     CA(15~0) Clk(0~14) 0


CA3     CA(15~0) Clk(0~13) -1


CA4     CA(15~0) Clk(0~13) -1


CA5     CA(13~0) Clk(0~15) 1


CA6     CA(14~0) Clk(0~15) 0


CA7     CA(15~0) Clk(0~15) 0


CA8     CA(14~0) Clk(0~15) 0


CA9     CA(15~0) Clk(0~15) 0


=========================================


Max center = 1





=========================================


2. [Channel 0]CA training window after adjustment.


x=CA shift     Adjusted Pass window CA(max~min) Clk(min~max) center.


y=CA0~CA9


=========================================


CA0     Shift 2     CA(13~0) Clk(0~14) 1 setup time=14 hold time=13


CA1     Shift 2     CA(13~0) Clk(0~14) 1 setup time=14 hold time=13


CA2     Shift 1     CA(14~0) Clk(0~15) 1 setup time=15 hold time=14


CA3     Shift 2     CA(13~0) Clk(0~15) 1 setup time=14 hold time=14


CA4     Shift 2     CA(13~0) Clk(0~15) 1 setup time=14 hold time=14


CA5     Shift 0     CA(13~0) Clk(0~15) 1 setup time=14 hold time=14


CA6     Shift 1     CA(13~0) Clk(0~16) 1 setup time=14 hold time=15


CA7     Shift 1     CA(14~0) Clk(0~16) 1 setup time=15 hold time=15


CA8     Shift 1     CA(13~0) Clk(0~16) 1 setup time=14 hold time=15


CA9     Shift 1     CA(14~0) Clk(0~16) 1 setup time=15 hold time=15


=========================================


Reg.1B8h=1020101h


Reg.1C4h=1000000h


Reg.00ch=10000000h


Reg.0Ch=11000000h


CATrain_ClkDelay=1...


=========================================


1. [Channel 1] CA training window before adjustment.


x=Pass window CA(max~min) Clk(min~max) center.


y=CA0~CA9


=========================================


CA0     CA(15~0) Clk(0~14) 0


CA1     CA(15~0) Clk(0~14) 0


CA2     CA(14~0) Clk(0~15) 0


CA3     CA(13~0) Clk(0~15) 1


CA4     CA(13~0) Clk(0~15) 1


CA5     CA(15~0) Clk(0~12) -1


CA6     CA(15~0) Clk(0~12) -1


CA7     CA(15~0) Clk(0~12) -1


CA8     CA(15~0) Clk(0~12) -1


CA9     CA(15~0) Clk(0~11) -2


=========================================


Max center = 1





=========================================


2. [Channel 1]CA training window after adjustment.


x=CA shift     Adjusted Pass window CA(max~min) Clk(min~max) center.


y=CA0~CA9


=========================================


CA0     Shift 1     CA(14~0) Clk(0~15) 1 setup time=15 hold time=14


CA1     Shift 1     CA(14~0) Clk(0~15) 1 setup time=15 hold time=14


CA2     Shift 1     CA(13~0) Clk(0~16) 1 setup time=14 hold time=15


CA3     Shift 0     CA(13~0) Clk(0~15) 1 setup time=14 hold time=14


CA4     Shift 0     CA(13~0) Clk(0~15) 1 setup time=14 hold time=14


CA5     Shift 2     CA(13~0) Clk(0~14) 1 setup time=14 hold time=13


CA6     Shift 2     CA(13~0) Clk(0~14) 1 setup time=14 hold time=13


CA7     Shift 2     CA(13~0) Clk(0~14) 1 setup time=14 hold time=13


CA8     Shift 2     CA(13~0) Clk(0~14) 1 setup time=14 hold time=13


CA9     Shift 3     CA(12~0) Clk(0~14) 1 setup time=13 hold time=13


=========================================


Reg.1B8h=30101h


Reg.1C4h=1000000h


Reg.00ch=10000000h


Reg.0Ch=11000000h


CATrain_ClkDelay=1...


[EMI] MDL search dram init








[EMI] [Channel 0] [Rank 0] MDL searching ...





*********************************************************


Rank 0 DQS GW Calibration


Optimal coarse tune value 23, optimal fine tune value 56


*********************************************************








[EMI] [Channel 0] [Rank 1] MDL searching ...





DramcRxdqsGatingCal Cannot find any pass-window


 CHA dram_die_density:0x40000000








[EMI] [Channel 1] [Rank 0] MDL searching ...





*********************************************************


Rank 0 DQS GW Calibration


Optimal coarse tune value 23, optimal fine tune value 64


*********************************************************








[EMI] [Channel 1] [Rank 1] MDL searching ...





DramcRxdqsGatingCal Cannot find any pass-window


 CHB dram_die_density:0x40000000


 CHA dram_density:0x40000000


 CHB dram_density:0x40000000


CH_A Rank0 value 23, CH_B Rank0 value 23


CH_A Rank1 value 0, CH_B Rank1 value 0


[EMI] get_rank_number:1


[EMI]rank0: MR5:1


[Check]mt_get_mdl_number 0x0


[EMI] MDL number = 0


DramcPreInit: MR2 = 0x1A, WL = 0x6


DramcPreInit: MR2 = 0x1A, WL = 0x6


=========================================


1. [Channel 0] CA training window before adjustment.


x=Pass window CA(max~min) Clk(min~max) center.


y=CA0~CA9


=========================================


CA0     CA(15~0) Clk(0~11) -2


CA1     CA(15~0) Clk(0~12) -1


CA2     CA(15~0) Clk(0~13) -1


CA3     CA(15~0) Clk(0~12) -1


CA4     CA(15~0) Clk(0~13) -1


CA5     CA(14~0) Clk(0~15) 0


CA6     CA(14~0) Clk(0~15) 0


CA7     CA(15~0) Clk(0~15) 0


CA8     CA(15~0) Clk(0~15) 0


CA9     CA(15~0) Clk(0~15) 0


=========================================


Max center = 0





=========================================


2. [Channel 0]CA training window after adjustment.


x=CA shift     Adjusted Pass window CA(max~min) Clk(min~max) center.


y=CA0~CA9


=========================================


CA0     Shift 2     CA(13~0) Clk(0~13) 0 setup time=13 hold time=13


CA1     Shift 1     CA(14~0) Clk(0~13) 0 setup time=14 hold time=13


CA2     Shift 1     CA(14~0) Clk(0~14) 0 setup time=14 hold time=14


CA3     Shift 1     CA(14~0) Clk(0~13) 0 setup time=14 hold time=13


CA4     Shift 1     CA(14~0) Clk(0~14) 0 setup time=14 hold time=14


CA5     Shift 0     CA(14~0) Clk(0~15) 0 setup time=14 hold time=15


CA6     Shift 0     CA(14~0) Clk(0~15) 0 setup time=14 hold time=15


CA7     Shift 0     CA(15~0) Clk(0~15) 0 setup time=15 hold time=15


CA8     Shift 0     CA(15~0) Clk(0~15) 0 setup time=15 hold time=15


CA9     Shift 0     CA(15~0) Clk(0~15) 0 setup time=15 hold time=15


=========================================


Reg.1B8h=20101h


Reg.1C4h=1000000h


Reg.00ch=10000000h


Reg.0Ch=10000000h


CATrain_ClkDelay=0...


=========================================


1. [Channel 1] CA training window before adjustment.


x=Pass window CA(max~min) Clk(min~max) center.


y=CA0~CA9


=========================================


CA0     CA(15~0) Clk(0~14) 0


CA1     CA(15~0) Clk(0~14) 0


CA2     CA(15~0) Clk(0~15) 0


CA3     CA(14~0) Clk(0~14) 0


CA4     CA(14~0) Clk(0~15) 0


CA5     CA(15~0) Clk(0~12) -1


CA6     CA(15~0) Clk(0~12) -1


CA7     CA(15~0) Clk(0~12) -1


CA8     CA(15~0) Clk(0~12) -1


CA9     CA(15~0) Clk(0~12) -1


=========================================


Max center = 0





=========================================


2. [Channel 1]CA training window after adjustment.


x=CA shift     Adjusted Pass window CA(max~min) Clk(min~max) center.


y=CA0~CA9


=========================================


CA0     Shift 0     CA(15~0) Clk(0~14) 0 setup time=15 hold time=14


CA1     Shift 0     CA(15~0) Clk(0~14) 0 setup time=15 hold time=14


CA2     Shift 0     CA(15~0) Clk(0~15) 0 setup time=15 hold time=15


CA3     Shift 0     CA(14~0) Clk(0~14) 0 setup time=14 hold time=14


CA4     Shift 0     CA(14~0) Clk(0~15) 0 setup time=14 hold time=15


CA5     Shift 1     CA(14~0) Clk(0~13) 0 setup time=14 hold time=13


CA6     Shift 1     CA(14~0) Clk(0~13) 0 setup time=14 hold time=13


CA7     Shift 1     CA(14~0) Clk(0~13) 0 setup time=14 hold time=13


CA8     Shift 1     CA(14~0) Clk(0~13) 0 setup time=14 hold time=13


CA9     Shift 1     CA(14~0) Clk(0~13) 0 setup time=14 hold time=13


=========================================


Reg.1B8h=10101h


Reg.1C4h=1000000h


Reg.00ch=10000000h


Reg.0Ch=10000000h


CATrain_ClkDelay=0...


DRAM Operation Data Rate: DDR-1163


===============================================================================


[Channel 0]dramc_write_leveling_swcal


===============================================================================


pass byte mask = FFh, fgwrlevel_done[0]=1h


byte_i    status    best delay


0    12    5


1    11    6


2    12    5


3    11    6


========================================


DQS0 output delay =  5


DQS1 output delay =  6


DQS2 output delay =  5


DQS3 output delay =  6


[write leveling]DQS: 0x6565 DQM: 0x6565


[write leveling]DQ byte0 reg: 0x200 val: 0x55555555


[write leveling]DQ byte1 reg: 0x204 val: 0x66666666


[write leveling]DQ byte2 reg: 0x208 val: 0x55555555


[write leveling]DQ byte3 reg: 0x20C val: 0x66666666


===============================================================================


[Channel 1]dramc_write_leveling_swcal


===============================================================================


pass byte mask = FFh, fgwrlevel_done[1]=1h


byte_i    status    best delay


0    12    5


1    14    3


2    11    6


3    14    3


========================================


DQS0 output delay =  5


DQS1 output delay =  3


DQS2 output delay =  6


DQS3 output delay =  3


[write leveling]DQS: 0x3635 DQM: 0x3635


[write leveling]DQ byte0 reg: 0x40000200 val: 0x55555555


[write leveling]DQ byte1 reg: 0x40000204 val: 0x33333333


[write leveling]DQ byte2 reg: 0x40000208 val: 0x66666666


[write leveling]DQ byte3 reg: 0x4000020C val: 0x33333333








[Channel 0] [Rank 0] Start tuning DRAMC Gating Window for rank ...





*********************************************************


Rank 0 DQS GW Calibration


Optimal coarse tune value 23, optimal fine tune value 56


*********************************************************








[Channel 1] [Rank 0] Start tuning DRAMC Gating Window for rank ...





*********************************************************


Rank 0 DQS GW Calibration


Optimal coarse tune value 23, optimal fine tune value 56


*********************************************************


[Channel 0 CLK DUTY CALIB] Final DUTY_SEL=1, DUTY=1 --> rx window size=1625, Reg.148h=10010000h


[Channel 1 CLK DUTY CALIB] Final DUTY_SEL=1, DUTY=2 --> rx window size=1629, Reg.148h=10020000h





[Channel 0] RX DQS per bit para : test pattern=5, test2_1=0x55000000, test2_2=0xAA000400, LSW_HSR=0


------------------------------------------------------


Start calculate dq time and dqs time /


Find max DQS delay per byte / Adjust DQ delay to align DQS...


------------------------------------------------------


bit#0 : dq time=10 dqs time=42 win=52 center=(0, 16)


bit#1 : dq time=11 dqs time=39 win=50 center=(0, 14)


bit#2 : dq time=11 dqs time=40 win=51 center=(0, 14)


bit#3 : dq time=9 dqs time=43 win=52 center=(0, 17)


bit#4 : dq time=10 dqs time=41 win=51 center=(0, 15)


bit#5 : dq time=10 dqs time=41 win=51 center=(0, 15)


bit#6 : dq time=11 dqs time=41 win=52 center=(0, 15)


bit#7 : dq time=12 dqs time=38 win=50 center=(0, 13)


----seperate line----


bit#8 : dq time=6 dqs time=45 win=51 center=(0, 19)


bit#9 : dq time=10 dqs time=42 win=52 center=(0, 16)


bit#10 : dq time=11 dqs time=42 win=53 center=(0, 15)


bit#11 : dq time=10 dqs time=41 win=51 center=(0, 15)


bit#12 : dq time=10 dqs time=42 win=52 center=(0, 16)


bit#13 : dq time=8 dqs time=43 win=51 center=(0, 17)


bit#14 : dq time=10 dqs time=39 win=49 center=(0, 14)


bit#15 : dq time=10 dqs time=41 win=51 center=(0, 15)


----seperate line----


bit#16 : dq time=8 dqs time=45 win=53 center=(0, 18)


bit#17 : dq time=9 dqs time=42 win=51 center=(0, 16)


bit#18 : dq time=12 dqs time=37 win=49 center=(0, 12)


bit#19 : dq time=8 dqs time=43 win=51 center=(0, 17)


bit#20 : dq time=11 dqs time=39 win=50 center=(0, 14)


bit#21 : dq time=11 dqs time=39 win=50 center=(0, 14)


bit#22 : dq time=11 dqs time=38 win=49 center=(0, 13)


bit#23 : dq time=12 dqs time=37 win=49 center=(0, 12)


----seperate line----


bit#24 : dq time=11 dqs time=41 win=52 center=(0, 15)


bit#25 : dq time=11 dqs time=39 win=50 center=(0, 14)


bit#26 : dq time=11 dqs time=39 win=50 center=(0, 14)


bit#27 : dq time=11 dqs time=39 win=50 center=(0, 14)


bit#28 : dq time=10 dqs time=41 win=51 center=(0, 15)


bit#29 : dq time=10 dqs time=42 win=52 center=(0, 16)


bit#30 : dq time=7 dqs time=43 win=50 center=(0, 18)


bit#31 : dq time=7 dqs time=45 win=52 center=(0, 19)


----seperate line----


==================================================


    dramc_rxdqs_perbit_swcal


    channel=0(0:cha, 1:chb)


    bus width=32


==================================================


DQS Delay :


 DQS0 = 17 DQS1 = 19 DQS2 = 18 DQS3 = 19


DQ Delay :


DQ0 = 1 DQ1 = 3 DQ2 = 3 DQ3 = 0


DQ4 = 2 DQ5 = 2 DQ6 = 2 DQ7 = 4


DQ8 = 0 DQ9 = 3 DQ10 = 4 DQ11 = 4


DQ12 = 3 DQ13 = 2 DQ14 = 5 DQ15 = 4


DQ16 = 0 DQ17 = 2 DQ18 = 6 DQ19 = 1


DQ20 = 4 DQ21 = 4 DQ22 = 5 DQ23 = 6


DQ24 = 4 DQ25 = 5 DQ26 = 5 DQ27 = 5


DQ28 = 4 DQ29 = 3 DQ30 = 1 DQ31 = 0


________________________________________________________________________


RX DQS register 0x18=0x13121311


RX DQS register 0x1C=0x13121311


RX DQ register 0x210=0x30301


RX DQ register 0x214=0x4020202


RX DQ register 0x218=0x4040300


RX DQ register 0x21C=0x4050203


RX DQ register 0x220=0x1060200


RX DQ register 0x224=0x6050404


RX DQ register 0x228=0x5050504


RX DQ register 0x22C=0x10304





[Channel 1] RX DQS per bit para : test pattern=5, test2_1=0x55000000, test2_2=0xAA000400, LSW_HSR=0


------------------------------------------------------


Start calculate dq time and dqs time /


Find max DQS delay per byte / Adjust DQ delay to align DQS...


------------------------------------------------------


bit#0 : dq time=11 dqs time=41 win=52 center=(0, 15)


bit#1 : dq time=11 dqs time=39 win=50 center=(0, 14)


bit#2 : dq time=12 dqs time=39 win=51 center=(0, 13)


bit#3 : dq time=11 dqs time=40 win=51 center=(0, 14)


bit#4 : dq time=9 dqs time=44 win=53 center=(0, 17)


bit#5 : dq time=10 dqs time=42 win=52 center=(0, 16)


bit#6 : dq time=10 dqs time=42 win=52 center=(0, 16)


bit#7 : dq time=12 dqs time=38 win=50 center=(0, 13)


----seperate line----


bit#8 : dq time=7 dqs time=46 win=53 center=(0, 19)


bit#9 : dq time=10 dqs time=40 win=50 center=(0, 15)


bit#10 : dq time=11 dqs time=39 win=50 center=(0, 14)


bit#11 : dq time=11 dqs time=39 win=50 center=(0, 14)


bit#12 : dq time=10 dqs time=43 win=53 center=(0, 16)


bit#13 : dq time=10 dqs time=42 win=52 center=(0, 16)


bit#14 : dq time=10 dqs time=43 win=53 center=(0, 16)


bit#15 : dq time=10 dqs time=41 win=51 center=(0, 15)


----seperate line----


bit#16 : dq time=7 dqs time=45 win=52 center=(0, 19)


bit#17 : dq time=9 dqs time=39 win=48 center=(0, 15)


bit#18 : dq time=11 dqs time=39 win=50 center=(0, 14)


bit#19 : dq time=10 dqs time=40 win=50 center=(0, 15)


bit#20 : dq time=10 dqs time=39 win=49 center=(0, 14)


bit#21 : dq time=11 dqs time=39 win=50 center=(0, 14)


bit#22 : dq time=12 dqs time=38 win=50 center=(0, 13)


bit#23 : dq time=12 dqs time=38 win=50 center=(0, 13)


----seperate line----


bit#24 : dq time=11 dqs time=40 win=51 center=(0, 14)


bit#25 : dq time=11 dqs time=39 win=50 center=(0, 14)


bit#26 : dq time=11 dqs time=39 win=50 center=(0, 14)


bit#27 : dq time=12 dqs time=39 win=51 center=(0, 13)


bit#28 : dq time=11 dqs time=40 win=51 center=(0, 14)


bit#29 : dq time=10 dqs time=43 win=53 center=(0, 16)


bit#30 : dq time=10 dqs time=41 win=51 center=(0, 15)


bit#31 : dq time=10 dqs time=42 win=52 center=(0, 16)


----seperate line----


==================================================


    dramc_rxdqs_perbit_swcal


    channel=1(0:cha, 1:chb)


    bus width=32


==================================================


DQS Delay :


 DQS0 = 17 DQS1 = 19 DQS2 = 19 DQS3 = 16


DQ Delay :


DQ0 = 2 DQ1 = 3 DQ2 = 4 DQ3 = 3


DQ4 = 0 DQ5 = 1 DQ6 = 1 DQ7 = 4


DQ8 = 0 DQ9 = 4 DQ10 = 5 DQ11 = 5


DQ12 = 3 DQ13 = 3 DQ14 = 3 DQ15 = 4


DQ16 = 0 DQ17 = 4 DQ18 = 5 DQ19 = 4


DQ20 = 5 DQ21 = 5 DQ22 = 6 DQ23 = 6


DQ24 = 2 DQ25 = 2 DQ26 = 2 DQ27 = 3


DQ28 = 2 DQ29 = 0 DQ30 = 1 DQ31 = 0


________________________________________________________________________


RX DQS register 0x18=0x10131311


RX DQS register 0x1C=0x10131311


RX DQ register 0x210=0x3040302


RX DQ register 0x214=0x4010100


RX DQ register 0x218=0x5050400


RX DQ register 0x21C=0x4030303


RX DQ register 0x220=0x4050400


RX DQ register 0x224=0x6060505


RX DQ register 0x228=0x3020202


RX DQ register 0x22C=0x10002


[Channel 0] TX DQS per bit para : test pattern=5, test2_1=0x55000000, test2_2=0xAA000400


------------------------------------------------------


Start calculate setup time and hold time /


Find max DQS delay per byte / Adjust DQ delay to align DQS...


------------------------------------------------------


bit#0 : setup time=15 hold time=12 win=27, center (DQ,DQS)=(1, 0)


bit#1 : setup time=15 hold time=11 win=26, center (DQ,DQS)=(2, 0)


bit#2 : setup time=15 hold time=12 win=27, center (DQ,DQS)=(1, 0)


bit#3 : setup time=14 hold time=13 win=27, center (DQ,DQS)=(0, 0)


bit#4 : setup time=15 hold time=12 win=27, center (DQ,DQS)=(1, 0)


bit#5 : setup time=15 hold time=11 win=26, center (DQ,DQS)=(2, 0)


bit#6 : setup time=15 hold time=13 win=28, center (DQ,DQS)=(1, 0)


bit#7 : setup time=15 hold time=13 win=28, center (DQ,DQS)=(1, 0)


bit#8 : setup time=14 hold time=14 win=28, center (DQ,DQS)=(0, 0)


bit#9 : setup time=14 hold time=12 win=26, center (DQ,DQS)=(1, 0)


bit#10 : setup time=14 hold time=12 win=26, center (DQ,DQS)=(1, 0)


bit#11 : setup time=14 hold time=11 win=25, center (DQ,DQS)=(1, 0)


bit#12 : setup time=14 hold time=13 win=27, center (DQ,DQS)=(0, 0)


bit#13 : setup time=14 hold time=13 win=27, center (DQ,DQS)=(0, 0)


bit#14 : setup time=14 hold time=12 win=26, center (DQ,DQS)=(1, 0)


bit#15 : setup time=14 hold time=13 win=27, center (DQ,DQS)=(0, 0)


bit#16 : setup time=13 hold time=14 win=27, center (DQ,DQS)=(0, 0)


bit#17 : setup time=13 hold time=13 win=26, center (DQ,DQS)=(0, 0)


bit#18 : setup time=13 hold time=11 win=24, center (DQ,DQS)=(1, 0)


bit#19 : setup time=13 hold time=12 win=25, center (DQ,DQS)=(0, 0)


bit#20 : setup time=13 hold time=11 win=24, center (DQ,DQS)=(1, 0)


bit#21 : setup time=13 hold time=11 win=24, center (DQ,DQS)=(1, 0)


bit#22 : setup time=13 hold time=11 win=24, center (DQ,DQS)=(1, 0)


bit#23 : setup time=13 hold time=10 win=23, center (DQ,DQS)=(1, 0)


bit#24 : setup time=15 hold time=11 win=26, center (DQ,DQS)=(2, 0)


bit#25 : setup time=15 hold time=10 win=25, center (DQ,DQS)=(2, 0)


bit#26 : setup time=15 hold time=11 win=26, center (DQ,DQS)=(2, 0)


bit#27 : setup time=15 hold time=11 win=26, center (DQ,DQS)=(2, 0)


bit#28 : setup time=15 hold time=11 win=26, center (DQ,DQS)=(2, 0)


bit#29 : setup time=15 hold time=12 win=27, center (DQ,DQS)=(1, 0)


bit#30 : setup time=15 hold time=13 win=28, center (DQ,DQS)=(1, 0)


bit#31 : setup time=14 hold time=13 win=27, center (DQ,DQS)=(0, 0)


==================================================


        dramc_txdqs_perbit_swcal


           channel=0(0:cha, 1:chb)


           bus width=32


==================================================


DQS Delay :


 DQS0 = 0 DQS1 = 0 DQS2 = 0 DQS3 = 0


DQM Delay :


 DQM0 = 1 DQM1 = 0 DQM2 = 0 DQM3 = 1


DQ Delay :


DQ0 = 1 DQ1 = 2 DQ2 = 1 DQ3 = 0


DQ4 = 1 DQ5 = 2 DQ6 = 1 DQ7 = 1


DQ8 = 0 DQ9 = 1 DQ10 = 1 DQ11 = 1


DQ12 = 0 DQ13 = 0 DQ14 = 1 DQ15 = 0


DQ16 = 0 DQ17 = 0 DQ18 = 1 DQ19 = 0


DQ20 = 1 DQ21 = 1 DQ22 = 1 DQ23 = 1


DQ24 = 2 DQ25 = 2 DQ26 = 2 DQ27 = 2


DQ28 = 2 DQ29 = 1 DQ30 = 1 DQ31 = 0


________________________________________________________________________


Add CLK to DQS/DQ skew based on write leveling / CA training.


DQS0: 5  DQS1: 6  DQS2: 5  DQS3: 6


TX DQS register 0x14=0x6565


TX DQ register 0x200=0x66765676


TX DQ register 0x204=0x67667776


TX DQ register 0x208=0x66665655


TX DQ register 0x20C=0x67788888


TX DQM register 0x10=0x7566


[Channel 1] TX DQS per bit para : test pattern=5, test2_1=0x55000000, test2_2=0xAA000400


------------------------------------------------------


Start calculate setup time and hold time /


Find max DQS delay per byte / Adjust DQ delay to align DQS...


------------------------------------------------------


bit#0 : setup time=15 hold time=11 win=26, center (DQ,DQS)=(2, 0)


bit#1 : setup time=15 hold time=11 win=26, center (DQ,DQS)=(2, 0)


bit#2 : setup time=15 hold time=12 win=27, center (DQ,DQS)=(1, 0)


bit#3 : setup time=15 hold time=12 win=27, center (DQ,DQS)=(1, 0)


bit#4 : setup time=15 hold time=13 win=28, center (DQ,DQS)=(1, 0)


bit#5 : setup time=15 hold time=12 win=27, center (DQ,DQS)=(1, 0)


bit#6 : setup time=14 hold time=13 win=27, center (DQ,DQS)=(0, 0)


bit#7 : setup time=15 hold time=12 win=27, center (DQ,DQS)=(1, 0)


bit#8 : setup time=13 hold time=14 win=27, center (DQ,DQS)=(0, 0)


bit#9 : setup time=14 hold time=12 win=26, center (DQ,DQS)=(1, 0)


bit#10 : setup time=14 hold time=12 win=26, center (DQ,DQS)=(1, 0)


bit#11 : setup time=14 hold time=11 win=25, center (DQ,DQS)=(1, 0)


bit#12 : setup time=14 hold time=13 win=27, center (DQ,DQS)=(0, 0)


bit#13 : setup time=14 hold time=12 win=26, center (DQ,DQS)=(1, 0)


bit#14 : setup time=14 hold time=12 win=26, center (DQ,DQS)=(1, 0)


bit#15 : setup time=14 hold time=12 win=26, center (DQ,DQS)=(1, 0)


bit#16 : setup time=14 hold time=14 win=28, center (DQ,DQS)=(0, 0)


bit#17 : setup time=15 hold time=12 win=27, center (DQ,DQS)=(1, 0)


bit#18 : setup time=15 hold time=11 win=26, center (DQ,DQS)=(2, 0)


bit#19 : setup time=15 hold time=10 win=25, center (DQ,DQS)=(2, 0)


bit#20 : setup time=15 hold time=11 win=26, center (DQ,DQS)=(2, 0)


bit#21 : setup time=15 hold time=11 win=26, center (DQ,DQS)=(2, 0)


bit#22 : setup time=15 hold time=11 win=26, center (DQ,DQS)=(2, 0)


bit#23 : setup time=15 hold time=11 win=26, center (DQ,DQS)=(2, 0)


bit#24 : setup time=14 hold time=11 win=25, center (DQ,DQS)=(1, 0)


bit#25 : setup time=14 hold time=11 win=25, center (DQ,DQS)=(1, 0)


bit#26 : setup time=14 hold time=11 win=25, center (DQ,DQS)=(1, 0)


bit#27 : setup time=14 hold time=10 win=24, center (DQ,DQS)=(2, 0)


bit#28 : setup time=14 hold time=12 win=26, center (DQ,DQS)=(1, 0)


bit#29 : setup time=14 hold time=13 win=27, center (DQ,DQS)=(0, 0)


bit#30 : setup time=14 hold time=12 win=26, center (DQ,DQS)=(1, 0)


bit#31 : setup time=14 hold time=12 win=26, center (DQ,DQS)=(1, 0)


==================================================


        dramc_txdqs_perbit_swcal


           channel=1(0:cha, 1:chb)


           bus width=32


==================================================


DQS Delay :


 DQS0 = 0 DQS1 = 0 DQS2 = 0 DQS3 = 0


DQM Delay :


 DQM0 = 1 DQM1 = 0 DQM2 = 1 DQM3 = 1


DQ Delay :


DQ0 = 2 DQ1 = 2 DQ2 = 1 DQ3 = 1


DQ4 = 1 DQ5 = 1 DQ6 = 0 DQ7 = 1


DQ8 = 0 DQ9 = 1 DQ10 = 1 DQ11 = 1


DQ12 = 0 DQ13 = 1 DQ14 = 1 DQ15 = 1


DQ16 = 0 DQ17 = 1 DQ18 = 2 DQ19 = 2


DQ20 = 2 DQ21 = 2 DQ22 = 2 DQ23 = 2


DQ24 = 1 DQ25 = 1 DQ26 = 1 DQ27 = 2


DQ28 = 1 DQ29 = 0 DQ30 = 1 DQ31 = 1


________________________________________________________________________


Add CLK to DQS/DQ skew based on write leveling / CA training.


DQS0: 5  DQS1: 3  DQS2: 6  DQS3: 3


TX DQS register 0x14=0x3635


TX DQ register 0x200=0x65666677


TX DQ register 0x204=0x44434443


TX DQ register 0x208=0x88888876


TX DQ register 0x20C=0x44345444


TX DQM register 0x10=0x4736


Save low frequency registers setting.


[PTP] >> ptp_init()


[PTP] >> get_devinfo()


[PTP] << get_devinfo():347


[PTP] E3 & later IC => chip_sw_ver = 1, E2 IC => chip_sw_ver = 0


[PTP] chip_sw_ver = 1


[PTP] Vcore is tuning down from 1125mV


[PTP] >> ptp_init_det()


[PTP] [ptp_init_det]: det->VBOOT 68


[PTP] << ptp_init_det():440


[PTP] TOP_DCMCTL = 0x00000001


[PTP] >> base_ops_set_phase()


[PTP] << base_ops_set_phase():540


[PTP] >> ptp_isr()


[PTP] >> ptp_isr_handler()


[PTP] [PTP_DET_VCORE_PDN]


[PTP] PTPINTSTS = 1


[PTP] PTP_PTPEN = 1


[PTP] >> handle_init01_isr()


[PTP] @ handle_init01_isr(PTP_DET_VCORE_PDN)


[PTP] PTP_DET_VCORE_PDN: handle_init01_isr: VDN74:0x00000000, VDN30:0x00003339, DCVALUES:0x02760046


[PTP] << handle_init01_isr():707


[PTP] << ptp_isr_handler():898


[PTP] << ptp_isr():936


[PTP] >> mt_ptp_reg_dump()


[PTP] PTP_240[PTP_DET_VCORE_PDN]	= 2760046


[PTP] PTP_218[PTP_DET_VCORE_PDN]	= 5564


[PTP] PTP_26C[PTP_DET_VCORE_PDN]	= 3339


[PTP] PTP_248[PTP_DET_VCORE_PDN]	= 30303A40


[PTP] PTP_238[PTP_DET_VCORE_PDN]	= 0


[PTP] << mt_ptp_reg_dump():678


[PTP] >> base_ops_set_phase()


[PTP] << base_ops_set_phase():540


[PTP] >> ptp_isr()


[PTP] >> ptp_isr_handler()


[PTP] [PTP_DET_VCORE_PDN]


[PTP] PTPINTSTS = 1


[PTP] PTP_PTPEN = 5


[PTP] >> handle_init02_isr()


[PTP] @ handle_init02_isr(PTP_DET_VCORE_PDN)


[PTP] PTP_DET_VCORE_PDN: handle_init02_isr: VOP74:0x30303030, VOP30:0x3030393F, DCVALUES:0x0276FFBA


[PTP] ptp_detectors[PTP_DET_VCORE_PDN].volt_tbl[0] = 3F


[PTP] ptp_detectors[PTP_DET_VCORE_PDN].volt_tbl[1] = 39


[PTP] ptp_detectors[PTP_DET_VCORE_PDN].volt_tbl[2] = 30


[PTP] ptp_detectors[PTP_DET_VCORE_PDN].volt_tbl[3] = 30


[PTP] ptp_detectors[PTP_DET_VCORE_PDN].volt_tbl[4] = 30


[PTP] ptp_detectors[PTP_DET_VCORE_PDN].volt_tbl[5] = 30


[PTP] ptp_detectors[PTP_DET_VCORE_PDN].volt_tbl[6] = 30


[PTP] ptp_detectors[PTP_DET_VCORE_PDN].volt_tbl[7] = 30


[PTP] << handle_init02_isr():757


[PTP] << ptp_isr_handler():898


[PTP] << ptp_isr():936


[PTP] >> mt_ptp_reg_dump()


[PTP] PTP_240[PTP_DET_VCORE_PDN]	= 276FFBA


[PTP] PTP_218[PTP_DET_VCORE_PDN]	= 5564


[PTP] PTP_26C[PTP_DET_VCORE_PDN]	= 3339


[PTP] PTP_248[PTP_DET_VCORE_PDN]	= 3030393F


[PTP] PTP_238[PTP_DET_VCORE_PDN]	= 0


[PTP] << mt_ptp_reg_dump():678


[PTP] PTP set volt: 0x0000003F


[PTP] 0x00000043


[PTP] 0x00000042


[PTP] 0x00000041


[PTP] 0x00000040


[PTP] 0x0000003F


[PTP] M_HW_RES0	= 0x19161617


[PTP] M_HW_RES1	= 0x93AAA9A3


[PTP] M_HW_RES2	= 0x00000000


[PTP] M_HW_RES3	= 0x2E300000


[PTP] M_HW_RES4	= 0x00000003


[PTP] M_HW_RES5	= 0x00585000


[PTP] M_HW_RES6	= 0xCBDEB334


[PTP] M_HW_RES7	= 0x32194F69


[PTP] M_HW_RES8	= 0x2533DAC5


[PTP] M_HW_RES9	= 0x4362684C


[PTP] Right now


[PTP] Vcore is 1093mV


[PTP] axi_sel_clk is 208MHz


[PTP] << ptp_init():1100


Switch frequency to 800...


DRAM Operation Data Rate: DDR-1600


DramcPreInit: MR2 = 0x1A, WL = 0x6


DramcPreInit: MR2 = 0x1A, WL = 0x6


=========================================


1. [Channel 0] CA training window before adjustment.


x=Pass window CA(max~min) Clk(min~max) center.


y=CA0~CA9


=========================================


CA0     CA(12~0) Clk(0~8) -2


CA1     CA(11~0) Clk(0~9) -1


CA2     CA(11~0) Clk(0~9) -1


CA3     CA(12~0) Clk(0~8) -2


CA4     CA(12~0) Clk(0~8) -2


CA5     CA(8~0) Clk(0~12) 2


CA6     CA(8~0) Clk(0~12) 2


CA7     CA(9~0) Clk(0~11) 1


CA8     CA(9~0) Clk(0~12) 1


CA9     CA(10~0) Clk(0~10) 0


=========================================


Max center = 2





=========================================


2. [Channel 0]CA training window after adjustment.


x=CA shift     Adjusted Pass window CA(max~min) Clk(min~max) center.


y=CA0~CA9


=========================================


CA0     Shift 4     CA(8~0) Clk(0~12) 2 setup time=10 hold time=10


CA1     Shift 3     CA(8~0) Clk(0~12) 2 setup time=10 hold time=10


CA2     Shift 3     CA(8~0) Clk(0~12) 2 setup time=10 hold time=10


CA3     Shift 4     CA(8~0) Clk(0~12) 2 setup time=10 hold time=10


CA4     Shift 4     CA(8~0) Clk(0~12) 2 setup time=10 hold time=10


CA5     Shift 0     CA(8~0) Clk(0~12) 2 setup time=10 hold time=10


CA6     Shift 0     CA(8~0) Clk(0~12) 2 setup time=10 hold time=10


CA7     Shift 1     CA(8~0) Clk(0~12) 2 setup time=10 hold time=10


CA8     Shift 1     CA(8~0) Clk(0~13) 2 setup time=10 hold time=11


CA9     Shift 2     CA(8~0) Clk(0~12) 2 setup time=10 hold time=10


=========================================


Reg.1B8h=2040202h


Reg.1C4h=2000000h


Reg.00ch=20000000h


Reg.0Ch=22000000h


CATrain_ClkDelay=2...


=========================================


1. [Channel 1] CA training window before adjustment.


x=Pass window CA(max~min) Clk(min~max) center.


y=CA0~CA9


=========================================


CA0     CA(10~0) Clk(0~10) 0


CA1     CA(11~0) Clk(0~9) -1


CA2     CA(10~0) Clk(0~10) 0


CA3     CA(8~0) Clk(0~11) 1


CA4     CA(8~0) Clk(0~13) 2


CA5     CA(13~0) Clk(0~8) -2


CA6     CA(12~0) Clk(0~8) -2


CA7     CA(13~0) Clk(0~8) -2


CA8     CA(13~0) Clk(0~8) -2


CA9     CA(14~0) Clk(0~7) -3


=========================================


Max center = 2





=========================================


2. [Channel 1]CA training window after adjustment.


x=CA shift     Adjusted Pass window CA(max~min) Clk(min~max) center.


y=CA0~CA9


=========================================


CA0     Shift 2     CA(8~0) Clk(0~12) 2 setup time=10 hold time=10


CA1     Shift 3     CA(8~0) Clk(0~12) 2 setup time=10 hold time=10


CA2     Shift 2     CA(8~0) Clk(0~12) 2 setup time=10 hold time=10


CA3     Shift 1     CA(7~0) Clk(0~12) 2 setup time=9 hold time=10


CA4     Shift 0     CA(8~0) Clk(0~13) 2 setup time=10 hold time=11


CA5     Shift 4     CA(9~0) Clk(0~12) 2 setup time=11 hold time=10


CA6     Shift 4     CA(8~0) Clk(0~12) 2 setup time=10 hold time=10


CA7     Shift 4     CA(9~0) Clk(0~12) 2 setup time=11 hold time=10


CA8     Shift 4     CA(9~0) Clk(0~12) 2 setup time=11 hold time=10


CA9     Shift 5     CA(9~0) Clk(0~12) 2 setup time=11 hold time=10


=========================================


Reg.1B8h=50303h


Reg.1C4h=3000000h


Reg.00ch=30000000h


Reg.0Ch=32000000h


CATrain_ClkDelay=2...


===============================================================================


[Channel 0]dramc_write_leveling_swcal


===============================================================================


pass byte mask = FFh, fgwrlevel_done[0]=1h


byte_i    status    best delay


0    12    5


1    12    5


2    12    5


3    12    5


========================================


DQS0 output delay =  5


DQS1 output delay =  5


DQS2 output delay =  5


DQS3 output delay =  5


[write leveling]DQS: 0x5555 DQM: 0x5555


[write leveling]DQ byte0 reg: 0x200 val: 0x55555555


[write leveling]DQ byte1 reg: 0x204 val: 0x55555555


[write leveling]DQ byte2 reg: 0x208 val: 0x55555555


[write leveling]DQ byte3 reg: 0x20C val: 0x55555555


===============================================================================


[Channel 1]dramc_write_leveling_swcal


===============================================================================


pass byte mask = FFh, fgwrlevel_done[1]=1h


byte_i    status    best delay


0    12    5


1    14    3


2    12    5


3    14    3


========================================


DQS0 output delay =  5


DQS1 output delay =  3


DQS2 output delay =  5


DQS3 output delay =  3


[write leveling]DQS: 0x3535 DQM: 0x3535


[write leveling]DQ byte0 reg: 0x40000200 val: 0x55555555


[write leveling]DQ byte1 reg: 0x40000204 val: 0x33333333


[write leveling]DQ byte2 reg: 0x40000208 val: 0x55555555


[write leveling]DQ byte3 reg: 0x4000020C val: 0x33333333








[Channel 0] [Rank 0] Start tuning DRAMC Gating Window for rank ...





*********************************************************


Rank 0 DQS GW Calibration


Optimal coarse tune value 24, optimal fine tune value 56


*********************************************************








[Channel 1] [Rank 0] Start tuning DRAMC Gating Window for rank ...





*********************************************************


Rank 0 DQS GW Calibration


Optimal coarse tune value 24, optimal fine tune value 56


*********************************************************


[Channel 0 CLK DUTY CALIB] Final DUTY_SEL=1, DUTY=0 --> rx window size=1147, Reg.148h=10000000h


[Channel 1 CLK DUTY CALIB] Final DUTY_SEL=1, DUTY=1 --> rx window size=1159, Reg.148h=10010000h





[Channel 0] RX DQS per bit para : test pattern=5, test2_1=0x55000000, test2_2=0xAA000400, LSW_HSR=0


------------------------------------------------------


Start calculate dq time and dqs time /


Find max DQS delay per byte / Adjust DQ delay to align DQS...


------------------------------------------------------


bit#0 : dq time=10 dqs time=27 win=37 center=(0, 8)


bit#1 : dq time=11 dqs time=25 win=36 center=(0, 7)


bit#2 : dq time=11 dqs time=26 win=37 center=(0, 7)


bit#3 : dq time=9 dqs time=28 win=37 center=(0, 9)


bit#4 : dq time=10 dqs time=25 win=35 center=(0, 7)


bit#5 : dq time=10 dqs time=26 win=36 center=(0, 8)


bit#6 : dq time=11 dqs time=25 win=36 center=(0, 7)


bit#7 : dq time=12 dqs time=23 win=35 center=(0, 5)


----seperate line----


bit#8 : dq time=6 dqs time=29 win=35 center=(0, 11)


bit#9 : dq time=10 dqs time=27 win=37 center=(0, 8)


bit#10 : dq time=11 dqs time=27 win=38 center=(0, 8)


bit#11 : dq time=10 dqs time=27 win=37 center=(0, 8)


bit#12 : dq time=10 dqs time=27 win=37 center=(0, 8)


bit#13 : dq time=9 dqs time=28 win=37 center=(0, 9)


bit#14 : dq time=10 dqs time=26 win=36 center=(0, 8)


bit#15 : dq time=10 dqs time=27 win=37 center=(0, 8)


----seperate line----


bit#16 : dq time=7 dqs time=30 win=37 center=(0, 11)


bit#17 : dq time=8 dqs time=27 win=35 center=(0, 9)


bit#18 : dq time=12 dqs time=24 win=36 center=(0, 6)


bit#19 : dq time=7 dqs time=28 win=35 center=(0, 10)


bit#20 : dq time=11 dqs time=25 win=36 center=(0, 7)


bit#21 : dq time=11 dqs time=25 win=36 center=(0, 7)


bit#22 : dq time=11 dqs time=25 win=36 center=(0, 7)


bit#23 : dq time=12 dqs time=23 win=35 center=(0, 5)


----seperate line----


bit#24 : dq time=10 dqs time=25 win=35 center=(0, 7)


bit#25 : dq time=11 dqs time=23 win=34 center=(0, 6)


bit#26 : dq time=11 dqs time=26 win=37 center=(0, 7)


bit#27 : dq time=10 dqs time=24 win=34 center=(0, 7)


bit#28 : dq time=9 dqs time=25 win=34 center=(0, 8)


bit#29 : dq time=9 dqs time=27 win=36 center=(0, 9)


bit#30 : dq time=6 dqs time=27 win=33 center=(0, 10)


bit#31 : dq time=6 dqs time=29 win=35 center=(0, 11)


----seperate line----


==================================================


    dramc_rxdqs_perbit_swcal


    channel=0(0:cha, 1:chb)


    bus width=32


==================================================


DQS Delay :


 DQS0 = 9 DQS1 = 11 DQS2 = 11 DQS3 = 11


DQ Delay :


DQ0 = 1 DQ1 = 2 DQ2 = 2 DQ3 = 0


DQ4 = 2 DQ5 = 1 DQ6 = 2 DQ7 = 4


DQ8 = 0 DQ9 = 3 DQ10 = 3 DQ11 = 3


DQ12 = 3 DQ13 = 2 DQ14 = 3 DQ15 = 3


DQ16 = 0 DQ17 = 2 DQ18 = 5 DQ19 = 1


DQ20 = 4 DQ21 = 4 DQ22 = 4 DQ23 = 6


DQ24 = 4 DQ25 = 5 DQ26 = 4 DQ27 = 4


DQ28 = 3 DQ29 = 2 DQ30 = 1 DQ31 = 0


________________________________________________________________________


RX DQS register 0x18=0xB0B0B09


RX DQS register 0x1C=0xB0B0B09


RX DQ register 0x210=0x20201


RX DQ register 0x214=0x4020102


RX DQ register 0x218=0x3030300


RX DQ register 0x21C=0x3030203


RX DQ register 0x220=0x1050200


RX DQ register 0x224=0x6040404


RX DQ register 0x228=0x4040504


RX DQ register 0x22C=0x10203





[Channel 1] RX DQS per bit para : test pattern=5, test2_1=0x55000000, test2_2=0xAA000400, LSW_HSR=0


------------------------------------------------------


Start calculate dq time and dqs time /


Find max DQS delay per byte / Adjust DQ delay to align DQS...


------------------------------------------------------


bit#0 : dq time=11 dqs time=25 win=36 center=(0, 7)


bit#1 : dq time=11 dqs time=25 win=36 center=(0, 7)


bit#2 : dq time=12 dqs time=25 win=37 center=(0, 6)


bit#3 : dq time=12 dqs time=25 win=37 center=(0, 6)


bit#4 : dq time=9 dqs time=29 win=38 center=(0, 10)


bit#5 : dq time=10 dqs time=26 win=36 center=(0, 8)


bit#6 : dq time=11 dqs time=27 win=38 center=(0, 8)


bit#7 : dq time=12 dqs time=23 win=35 center=(0, 5)


----seperate line----


bit#8 : dq time=7 dqs time=31 win=38 center=(0, 12)


bit#9 : dq time=10 dqs time=26 win=36 center=(0, 8)


bit#10 : dq time=11 dqs time=25 win=36 center=(0, 7)


bit#11 : dq time=11 dqs time=26 win=37 center=(0, 7)


bit#12 : dq time=10 dqs time=29 win=39 center=(0, 9)


bit#13 : dq time=10 dqs time=27 win=37 center=(0, 8)


bit#14 : dq time=10 dqs time=28 win=38 center=(0, 9)


bit#15 : dq time=10 dqs time=27 win=37 center=(0, 8)


----seperate line----


bit#16 : dq time=5 dqs time=30 win=35 center=(0, 12)


bit#17 : dq time=8 dqs time=26 win=34 center=(0, 9)


bit#18 : dq time=10 dqs time=25 win=35 center=(0, 7)


bit#19 : dq time=10 dqs time=27 win=37 center=(0, 8)


bit#20 : dq time=10 dqs time=26 win=36 center=(0, 8)


bit#21 : dq time=10 dqs time=25 win=35 center=(0, 7)


bit#22 : dq time=12 dqs time=25 win=37 center=(0, 6)


bit#23 : dq time=11 dqs time=25 win=36 center=(0, 7)


----seperate line----


bit#24 : dq time=10 dqs time=24 win=34 center=(0, 7)


bit#25 : dq time=11 dqs time=25 win=36 center=(0, 7)


bit#26 : dq time=10 dqs time=24 win=34 center=(0, 7)


bit#27 : dq time=11 dqs time=24 win=35 center=(0, 6)


bit#28 : dq time=10 dqs time=26 win=36 center=(0, 8)


bit#29 : dq time=9 dqs time=27 win=36 center=(0, 9)


bit#30 : dq time=10 dqs time=27 win=37 center=(0, 8)


bit#31 : dq time=7 dqs time=27 win=34 center=(0, 10)


----seperate line----


==================================================


    dramc_rxdqs_perbit_swcal


    channel=1(0:cha, 1:chb)


    bus width=32


==================================================


DQS Delay :


 DQS0 = 10 DQS1 = 12 DQS2 = 12 DQS3 = 10


DQ Delay :


DQ0 = 3 DQ1 = 3 DQ2 = 4 DQ3 = 4


DQ4 = 0 DQ5 = 2 DQ6 = 2 DQ7 = 5


DQ8 = 0 DQ9 = 4 DQ10 = 5 DQ11 = 5


DQ12 = 3 DQ13 = 4 DQ14 = 3 DQ15 = 4


DQ16 = 0 DQ17 = 3 DQ18 = 5 DQ19 = 4


DQ20 = 4 DQ21 = 5 DQ22 = 6 DQ23 = 5


DQ24 = 3 DQ25 = 3 DQ26 = 3 DQ27 = 4


DQ28 = 2 DQ29 = 1 DQ30 = 2 DQ31 = 0


________________________________________________________________________


RX DQS register 0x18=0xA0C0C0A


RX DQS register 0x1C=0xA0C0C0A


RX DQ register 0x210=0x4040303


RX DQ register 0x214=0x5020200


RX DQ register 0x218=0x5050400


RX DQ register 0x21C=0x4030403


RX DQ register 0x220=0x4050300


RX DQ register 0x224=0x5060504


RX DQ register 0x228=0x4030303


RX DQ register 0x22C=0x20102


[Channel 0] TX DQS per bit para : test pattern=5, test2_1=0x55000000, test2_2=0xAA000400


------------------------------------------------------


Start calculate setup time and hold time /


Find max DQS delay per byte / Adjust DQ delay to align DQS...


------------------------------------------------------


bit#0 : setup time=11 hold time=8 win=19, center (DQ,DQS)=(1, 0)


bit#1 : setup time=11 hold time=8 win=19, center (DQ,DQS)=(1, 0)


bit#2 : setup time=11 hold time=8 win=19, center (DQ,DQS)=(1, 0)


bit#3 : setup time=10 hold time=9 win=19, center (DQ,DQS)=(0, 0)


bit#4 : setup time=11 hold time=8 win=19, center (DQ,DQS)=(1, 0)


bit#5 : setup time=11 hold time=8 win=19, center (DQ,DQS)=(1, 0)


bit#6 : setup time=11 hold time=9 win=20, center (DQ,DQS)=(1, 0)


bit#7 : setup time=11 hold time=9 win=20, center (DQ,DQS)=(1, 0)


bit#8 : setup time=9 hold time=10 win=19, center (DQ,DQS)=(0, 0)


bit#9 : setup time=10 hold time=8 win=18, center (DQ,DQS)=(1, 0)


bit#10 : setup time=10 hold time=8 win=18, center (DQ,DQS)=(1, 0)


bit#11 : setup time=10 hold time=7 win=17, center (DQ,DQS)=(1, 0)


bit#12 : setup time=10 hold time=9 win=19, center (DQ,DQS)=(0, 0)


bit#13 : setup time=10 hold time=8 win=18, center (DQ,DQS)=(1, 0)


bit#14 : setup time=10 hold time=8 win=18, center (DQ,DQS)=(1, 0)


bit#15 : setup time=10 hold time=9 win=19, center (DQ,DQS)=(0, 0)


bit#16 : setup time=8 hold time=10 win=18, center (DQ,DQS)=(0, 1)


bit#17 : setup time=8 hold time=9 win=17, center (DQ,DQS)=(0, 0)


bit#18 : setup time=8 hold time=8 win=16, center (DQ,DQS)=(0, 0)


bit#19 : setup time=8 hold time=8 win=16, center (DQ,DQS)=(0, 0)


bit#20 : setup time=8 hold time=8 win=16, center (DQ,DQS)=(0, 0)


bit#21 : setup time=8 hold time=8 win=16, center (DQ,DQS)=(0, 0)


bit#22 : setup time=8 hold time=8 win=16, center (DQ,DQS)=(0, 0)


bit#23 : setup time=8 hold time=7 win=15, center (DQ,DQS)=(0, 0)


bit#24 : setup time=11 hold time=8 win=19, center (DQ,DQS)=(1, 0)


bit#25 : setup time=11 hold time=7 win=18, center (DQ,DQS)=(2, 0)


bit#26 : setup time=11 hold time=8 win=19, center (DQ,DQS)=(1, 0)


bit#27 : setup time=11 hold time=7 win=18, center (DQ,DQS)=(2, 0)


bit#28 : setup time=11 hold time=8 win=19, center (DQ,DQS)=(1, 0)


bit#29 : setup time=10 hold time=9 win=19, center (DQ,DQS)=(0, 0)


bit#30 : setup time=10 hold time=10 win=20, center (DQ,DQS)=(0, 0)


bit#31 : setup time=9 hold time=10 win=19, center (DQ,DQS)=(0, 0)


==================================================


        dramc_txdqs_perbit_swcal


           channel=0(0:cha, 1:chb)


           bus width=32


==================================================


DQS Delay :


 DQS0 = 0 DQS1 = 0 DQS2 = 1 DQS3 = 0


DQM Delay :


 DQM0 = 0 DQM1 = 0 DQM2 = 0 DQM3 = 0


DQ Delay :


DQ0 = 1 DQ1 = 1 DQ2 = 1 DQ3 = 0


DQ4 = 1 DQ5 = 1 DQ6 = 1 DQ7 = 1


DQ8 = 0 DQ9 = 1 DQ10 = 1 DQ11 = 1


DQ12 = 0 DQ13 = 1 DQ14 = 1 DQ15 = 0


DQ16 = 0 DQ17 = 1 DQ18 = 1 DQ19 = 1


DQ20 = 1 DQ21 = 1 DQ22 = 1 DQ23 = 1


DQ24 = 1 DQ25 = 2 DQ26 = 1 DQ27 = 2


DQ28 = 1 DQ29 = 0 DQ30 = 0 DQ31 = 0


________________________________________________________________________


Add CLK to DQS/DQ skew based on write leveling / CA training.


DQS0: 7  DQS1: 7  DQS2: 7  DQS3: 7


TX DQS register 0x14=0x7777


TX DQ register 0x200=0x88887888


TX DQ register 0x204=0x78878887


TX DQ register 0x208=0x77777776


TX DQ register 0x20C=0x77789898


TX DQM register 0x10=0x7677


[Channel 1] TX DQS per bit para : test pattern=5, test2_1=0x55000000, test2_2=0xAA000400


------------------------------------------------------


Start calculate setup time and hold time /


Find max DQS delay per byte / Adjust DQ delay to align DQS...


------------------------------------------------------


bit#0 : setup time=10 hold time=7 win=17, center (DQ,DQS)=(1, 0)


bit#1 : setup time=10 hold time=7 win=17, center (DQ,DQS)=(1, 0)


bit#2 : setup time=10 hold time=7 win=17, center (DQ,DQS)=(1, 0)


bit#3 : setup time=10 hold time=8 win=18, center (DQ,DQS)=(1, 0)


bit#4 : setup time=9 hold time=9 win=18, center (DQ,DQS)=(0, 0)


bit#5 : setup time=10 hold time=8 win=18, center (DQ,DQS)=(1, 0)


bit#6 : setup time=9 hold time=8 win=17, center (DQ,DQS)=(0, 0)


bit#7 : setup time=10 hold time=8 win=18, center (DQ,DQS)=(1, 0)


bit#8 : setup time=8 hold time=9 win=17, center (DQ,DQS)=(0, 0)


bit#9 : setup time=9 hold time=8 win=17, center (DQ,DQS)=(0, 0)


bit#10 : setup time=9 hold time=8 win=17, center (DQ,DQS)=(0, 0)


bit#11 : setup time=9 hold time=7 win=16, center (DQ,DQS)=(1, 0)


bit#12 : setup time=9 hold time=8 win=17, center (DQ,DQS)=(0, 0)


bit#13 : setup time=9 hold time=8 win=17, center (DQ,DQS)=(0, 0)


bit#14 : setup time=9 hold time=7 win=16, center (DQ,DQS)=(1, 0)


bit#15 : setup time=9 hold time=8 win=17, center (DQ,DQS)=(0, 0)


bit#16 : setup time=8 hold time=10 win=18, center (DQ,DQS)=(0, 1)


bit#17 : setup time=10 hold time=8 win=18, center (DQ,DQS)=(1, 0)


bit#18 : setup time=10 hold time=8 win=18, center (DQ,DQS)=(1, 0)


bit#19 : setup time=10 hold time=7 win=17, center (DQ,DQS)=(1, 0)


bit#20 : setup time=10 hold time=7 win=17, center (DQ,DQS)=(1, 0)


bit#21 : setup time=10 hold time=7 win=17, center (DQ,DQS)=(1, 0)


bit#22 : setup time=10 hold time=7 win=17, center (DQ,DQS)=(1, 0)


bit#23 : setup time=10 hold time=7 win=17, center (DQ,DQS)=(1, 0)


bit#24 : setup time=9 hold time=7 win=16, center (DQ,DQS)=(1, 0)


bit#25 : setup time=9 hold time=8 win=17, center (DQ,DQS)=(0, 0)


bit#26 : setup time=9 hold time=7 win=16, center (DQ,DQS)=(1, 0)


bit#27 : setup time=9 hold time=7 win=16, center (DQ,DQS)=(1, 0)


bit#28 : setup time=9 hold time=7 win=16, center (DQ,DQS)=(1, 0)


bit#29 : setup time=9 hold time=9 win=18, center (DQ,DQS)=(0, 0)


bit#30 : setup time=9 hold time=8 win=17, center (DQ,DQS)=(0, 0)


bit#31 : setup time=9 hold time=8 win=17, center (DQ,DQS)=(0, 0)


==================================================


        dramc_txdqs_perbit_swcal


           channel=1(0:cha, 1:chb)


           bus width=32


==================================================


DQS Delay :


 DQS0 = 0 DQS1 = 0 DQS2 = 1 DQS3 = 0


DQM Delay :


 DQM0 = 0 DQM1 = 0 DQM2 = 1 DQM3 = 0


DQ Delay :


DQ0 = 1 DQ1 = 1 DQ2 = 1 DQ3 = 1


DQ4 = 0 DQ5 = 1 DQ6 = 0 DQ7 = 1


DQ8 = 0 DQ9 = 0 DQ10 = 0 DQ11 = 1


DQ12 = 0 DQ13 = 0 DQ14 = 1 DQ15 = 0


DQ16 = 0 DQ17 = 2 DQ18 = 2 DQ19 = 2


DQ20 = 2 DQ21 = 2 DQ22 = 2 DQ23 = 2


DQ24 = 1 DQ25 = 0 DQ26 = 1 DQ27 = 1


DQ28 = 1 DQ29 = 0 DQ30 = 0 DQ31 = 0


________________________________________________________________________


Add CLK to DQS/DQ skew based on write leveling / CA training.


DQS0: 7  DQS1: 5  DQS2: 7  DQS3: 5


TX DQS register 0x14=0x5757


TX DQ register 0x200=0x87878888


TX DQ register 0x204=0x56556555


TX DQ register 0x208=0x88888886


TX DQ register 0x20C=0x55566656


TX DQM register 0x10=0x5757


Save high frequency registers setting.


0:dram_rank_size:80000000


[A60808_MISC_CMD_TA2_XTALK-0] err_value=0x0


[A60808_MISC_CMD_TA2_XTALK-1] err_value=0x0


[EMI]DRAM Vendor_ID : 0x1


[EMI]EMI Set = 1039ms : DRAM Init(41ms) + DRAM Calib(788ms) + DRAM Auto(204ms)


[MEM] complex R/W mem test pass


[Dram_Buffer] dram_buf_t size: 0x1998C0


[Dram_Buffer] part_hdr_t size: 0x200


[Dram_Buffer] sizeof(boot_arg_t): 0x1B8


[Dram_Buffer] g_dram_buf start addr: 0x4BE00000


[Dram_Buffer] g_dram_buf->msdc_gpd_pool start addr: 0x4BF99840


[Dram_Buffer] g_dram_buf->msdc_bd_pool start addr: 0x4BF99880


 sram(0x0) sig  mismatch


RAM_CONSOLE start: 0x44400000, size: 0x80000, sig: 0x10000004


RAM_CONSOLE init ram_console: assign sig:0x43474244, off_pl:0x40, sz_pl:0x1C, off_lpl:0x80


RAM_CONSOLE init ram_console: after sig(0x44400000):0x43474244, off_pl(0x44400004):0x40, sz_pl(0x4440000C):0x1C, off_lpl(0x44400008):0x80


RAM_CONSOLE wdt status (0x44400040)=0x0


RAM_CONSOLE ram_console_reboot_reason_save: after sig(0x44400000):0x43474244, off_pl(0x44400004):0x40, sz_pl(0x4440000C):0x1C, off_lpl(0x44400008):0x80


[TPS61280][PL] [tps61280_init]


[I2C-PL] 331: id=2,addr: 75, transfer error


[I2C-PL] 337: I2C_ACKERR


[I2C-PL] 207: I2C structure:


[I2C-PL] Clk=12000,Id=2,Mode=1,St_rs=0,Dma_en=0,Op=3,Poll_en=1,Irq_stat=2


[I2C-PL] Trans_len=1,Trans_num=2,Trans_auxlen=1,Data_size=FFFF,speed=100


[I2C-PL] 210: base address 0x11009000


[I2C-PL] 230: I2C register:


[I2C-PL] SLAVE_ADDR=EA,INTR_MASK=F8,INTR_STAT=3,CONTROL=38,TRANSFER_LEN=1


[I2C-PL] TRANSAC_LEN=2,DELAY_LEN=40,TIMING=103B,START=0,FIFO_STAT=1101


[I2C-PL] IO_CONFIG=3,HS=102,DCM_EN=0,DEBUGSTAT=40,EXT_CONF=8001,TRANSFER_LEN_AUX=1


[I2C-PL] 836: write_read 0x10001 bytes fails,ret=-121.


[TPS61280][PL] Read 1 byte fails(FFFFFFFF).


[TPS61280][PL] [tps61280_hw_component_detect] exist=0, Reg[0x3]=0x0


[mmc_init]: msdc0 start in Preloader


[mmc_init]: msdc0, start mmc_init_host() in Preloader


[msdc_init]: msdc0 Host controller intialization start in preloader


[msdc_clock]: msdc0, pll[0xf020925c][bit0~1=0x1]=0x80000001, pll[0xf0209250][bit0=0x1]=0x111, mux[0xf0000070][bit15,23,31=0x1]=0x2060201, clk[0xf0003018][bit13=msdc0, bit14=msdc1]=0x10000000


[msdc_clock]: msdc0, pll[0xf020925c][bit0~1=0x1]=0x80000001, pll[0xf0209250][bit0=0x1]=0x111, mux[0xf0000070][bit15,23,31=0x1]=0x2060201, clk[0xf0003018][bit13=msdc0, bit14=msdc1]=0x10000000


[SD0] Bus Width: 1


[SD0] SET_CLK(260kHz): SCLK(259kHz) MODE(0) DDR(0) DIV(193) DS(0) RS(0)


[msdc_init]: msdc0 Host controller intialization done in preloader


[mmc_init]: msdc0 start mmc_init_card() in Preloader


[SD0] Switch to High-Speed mode!


[SD0] SET_CLK(260kHz): SCLK(259kHz) MODE(0) DDR(0) DIV(193) DS(0) RS(0)


[SD0] Bus Width: 8


[SD0] Size: 29820 MB, Max.Speed: 52000 kHz, blklen(512), nblks(61071360), ro(0)


[SD0] Initialized


[SD0] SET_CLK(52000kHz): SCLK(50000kHz) MODE(0) DDR(0) DIV(1) DS(0) RS(0)


[mmc_init]: msdc0 init done in Preloader, err=0


[PLFM] Init Boot Device: OK(0)


Enter mtk_kpd_gpio_set!


[GPT_PL]Parsing Primary GPT now...


[GPT_PL]Success to find valid GPT.





[PART] blksz: 512B


[PART] [0x0000000000080000-0x000000000037FFFF] "proinfo" (6144 blocks)


[PART] [0x0000000000380000-0x00000000007FFFFF] "PMT" (9216 blocks)


[PART] [0x0000000000800000-0x00000000008FFFFF] "kb" (2048 blocks)


[PART] [0x0000000000900000-0x00000000009FFFFF] "dkb" (2048 blocks)


[PART] [0x0000000000A00000-0x0000000000AFFFFF] "lk" (2048 blocks)


[PART] [0x0000000000B00000-0x0000000000FFFFFF] "tee1" (10240 blocks)


[PART] [0x0000000001000000-0x00000000014FFFFF] "tee2" (10240 blocks)


[PART] [0x0000000001500000-0x0000000003C7FFFF] "metadata" (80896 blocks)


[PART] [0x0000000003C80000-0x0000000003CFFFFF] "MISC" (1024 blocks)


[PART] [0x0000000003D00000-0x00000000044FFFFF] "reserved" (16384 blocks)


[PART] [0x0000000004500000-0x00000000054FFFFF] "boot_x" (32768 blocks)


[PART] [0x0000000005500000-0x00000000065FFFFF] "recovery_x" (34816 blocks)


[PART] [0x0000000006600000-0x000000006B47FFFF] "system" (3306496 blocks)


[PART] [0x000000006B480000-0x0000000085C7FFFF] "cache" (868352 blocks)


[PART] [0x0000000085C80000-0x0000000739F7FFFF] "userdata" (56236032 blocks)


[PART] [0x0000000739F80000-0x0000000740D7FFFF] "boot" (225280 blocks)


[PART] [0x0000000740D80000-0x0000000747B7FFFF] "recovery" (225280 blocks)


[PART] [0x0000000000000000-0x00000000000001FF] "" (1 blocks)


[PART] [0x0000000000000000-0x00000000000001FF] "" (1 blocks)


[PART] [0x0000000000000000-0x00000000000001FF] "" (1 blocks)


[PART] [0x0000000000000000-0x00000000000001FF] "" (1 blocks)


[PART] [0x0000000000000000-0x00000000000001FF] "" (1 blocks)


[PART] [0x0000000000000000-0x00000000000001FF] "" (1 blocks)


[PART] [0x0000000000000000-0x00000000000001FF] "" (1 blocks)


[PART] [0x0000000000000000-0x00000000000001FF] "" (1 blocks)


[PART] [0x0000000000000000-0x00000000000001FF] "" (1 blocks)


[PART] [0x0000000000000000-0x00000000000001FF] "" (1 blocks)


[PART] [0x0000000000000000-0x00000000000001FF] "" (1 blocks)


[PART] [0x0000000000000000-0x00000000000001FF] "" (1 blocks)


[PART] [0x0000000000000000-0x00000000000001FF] "" (1 blocks)


[PART] [0x0000000000000000-0x00000000000001FF] "" (1 blocks)


[PART] [0x0000000000000000-0x00000000000001FF] "" (1 blocks)


[PART] [0x0000000000000000-0x00000000000001FF] "" (1 blocks)


[PART] [0x0000000000000000-0x00000000000001FF] "" (1 blocks)


[PART] [0x0000000000000000-0x00000000000001FF] "" (1 blocks)


[PART] [0x0000000000000000-0x00000000000001FF] "" (1 blocks)


[PART] [0x0000000000000000-0x00000000000001FF] "" (1 blocks)


[PART] [0x0000000000000000-0x00000000000001FF] "" (1 blocks)


[PART] [0x0000000000000000-0x00000000000001FF] "" (1 blocks)


[PART] [0x0000000000000000-0x00000000000001FF] "" (1 blocks)


[PART] [0x0000000000000000-0x00000000000001FF] "" (1 blocks)


[PART] [0x0000000000000000-0x00000000000001FF] "" (1 blocks)


[PART] [0x0000000000000000-0x00000000000001FF] "" (1 blocks)


[PART] [0x0000000000000000-0x00000000000001FF] "" (1 blocks)


[PART] [0x0000000000000000-0x00000000000001FF] "" (1 blocks)


[PART] [0x0000000000000000-0x00000000000001FF] "" (1 blocks)


[PART] [0x0000000000000000-0x00000000000001FF] "" (1 blocks)


[PART] [0x0000000000000000-0x00000000000001FF] "" (1 blocks)


[PART] [0x0000000000000000-0x00000000000001FF] "" (1 blocks)


[PART] [0x0000000000000000-0x00000000000001FF] "" (1 blocks)


[PART] [0x0000000000000000-0x00000000000001FF] "" (1 blocks)


[PART] [0x0000000000000000-0x00000000000001FF] "" (1 blocks)


[PART] [0x0000000000000000-0x00000000000001FF] "" (1 blocks)


[PART] [0x0000000000000000-0x00000000000001FF] "" (1 blocks)


[PART] [0x0000000000000000-0x00000000000001FF] "" (1 blocks)


[PART] [0x0000000000000000-0x00000000000001FF] "" (1 blocks)


[PART] [0x0000000000000000-0x00000000000001FF] "" (1 blocks)


[PART] [0x0000000000000000-0x00000000000001FF] "" (1 blocks)


[PART] [0x0000000000000000-0x00000000000001FF] "" (1 blocks)


[PART] [0x0000000000000000-0x00000000000001FF] "" (1 blocks)


[PART] [0x0000000000000000-0x00000000000001FF] "" (1 blocks)


[PART] [0x0000000000000000-0x00000000000001FF] "" (1 blocks)


[PART] [0x0000000000000000-0x00000000000001FF] "" (1 blocks)


[PART] [0x0000000000000000-0x00000000000001FF] "" (1 blocks)


[PART] [0x0000000000000000-0x00000000000001FF] "" (1 blocks)


[PART] [0x0000000000000000-0x00000000000001FF] "" (1 blocks)


[PART] [0x0000000000000000-0x00000000000001FF] "" (1 blocks)


[PART] [0x0000000000000000-0x00000000000001FF] "" (1 blocks)


[PART] [0x0000000000000000-0x00000000000001FF] "" (1 blocks)


[PART] [0x0000000000000000-0x00000000000001FF] "" (1 blocks)


[PART] [0x0000000000000000-0x00000000000001FF] "" (1 blocks)


[PART] [0x0000000000000000-0x00000000000001FF] "" (1 blocks)


[PART] [0x0000000000000000-0x00000000000001FF] "" (1 blocks)


[PART] [0x0000000000000000-0x00000000000001FF] "" (1 blocks)


[PART] [0x0000000000000000-0x00000000000001FF] "" (1 blocks)


[PART] [0x0000000000000000-0x00000000000001FF] "" (1 blocks)


[PART] [0x0000000000000000-0x00000000000001FF] "" (1 blocks)


[PART] [0x0000000000000000-0x00000000000001FF] "" (1 blocks)


[PART] [0x0000000000000000-0x00000000000001FF] "" (1 blocks)


[PART] [0x0000000000000000-0x00000000000001FF] "" (1 blocks)


[PART] [0x0000000000000000-0x00000000000001FF] "" (1 blocks)


[PART] [0x0000000000000000-0x00000000000001FF] "" (1 blocks)


[PART] [0x0000000000000000-0x00000000000001FF] "" (1 blocks)


[PART] [0x0000000000000000-0x00000000000001FF] "" (1 blocks)


[PART] [0x0000000000000000-0x00000000000001FF] "" (1 blocks)


[PART] [0x0000000000000000-0x00000000000001FF] "" (1 blocks)


[PART] [0x0000000000000000-0x00000000000001FF] "" (1 blocks)


[PART] [0x0000000000000000-0x00000000000001FF] "" (1 blocks)


[PART] [0x0000000000000000-0x00000000000001FF] "" (1 blocks)


[PART] [0x0000000000000000-0x00000000000001FF] "" (1 blocks)


[PART] [0x0000000000000000-0x00000000000001FF] "" (1 blocks)


[PART] [0x0000000000000000-0x00000000000001FF] "" (1 blocks)


[PART] [0x0000000000000000-0x00000000000001FF] "" (1 blocks)


[PART] [0x0000000000000000-0x00000000000001FF] "" (1 blocks)


[PART] [0x0000000000000000-0x00000000000001FF] "" (1 blocks)


[PART] [0x0000000000000000-0x00000000000001FF] "" (1 blocks)


[PART] [0x0000000000000000-0x00000000000001FF] "" (1 blocks)


[PART] [0x0000000000000000-0x00000000000001FF] "" (1 blocks)


[PART] [0x0000000000000000-0x00000000000001FF] "" (1 blocks)


[PART] [0x0000000000000000-0x00000000000001FF] "" (1 blocks)


[PART] [0x0000000000000000-0x00000000000001FF] "" (1 blocks)


[PART] [0x0000000000000000-0x00000000000001FF] "" (1 blocks)


[PART] [0x0000000000000000-0x00000000000001FF] "" (1 blocks)


[PART] [0x0000000000000000-0x00000000000001FF] "" (1 blocks)


[PART] [0x0000000000000000-0x00000000000001FF] "" (1 blocks)


[PART] [0x0000000000000000-0x00000000000001FF] "" (1 blocks)


[PART] [0x0000000000000000-0x00000000000001FF] "" (1 blocks)


[PART] [0x0000000000000000-0x00000000000001FF] "" (1 blocks)


[PART] [0x0000000000000000-0x00000000000001FF] "" (1 blocks)


[PART] [0x0000000000000000-0x00000000000001FF] "" (1 blocks)


[PART] [0x0000000000000000-0x00000000000001FF] "" (1 blocks)


[PART] [0x0000000000000000-0x00000000000001FF] "" (1 blocks)


[PART] [0x0000000000000000-0x00000000000001FF] "" (1 blocks)


[PART] [0x0000000000000000-0x00000000000001FF] "" (1 blocks)


[PART] [0x0000000000000000-0x00000000000001FF] "" (1 blocks)


[PART] [0x0000000000000000-0x00000000000001FF] "" (1 blocks)


[PART] [0x0000000000000000-0x00000000000001FF] "" (1 blocks)


[PART] [0x0000000000000000-0x00000000000001FF] "" (1 blocks)


[PART] [0x0000000000000000-0x00000000000001FF] "" (1 blocks)


[PART] [0x0000000000000000-0x00000000000001FF] "" (1 blocks)


[PART] [0x0000000000000000-0x00000000000001FF] "" (1 blocks)


[PART] [0x0000000000000000-0x00000000000001FF] "" (1 blocks)


[PART] [0x0000000000000000-0x00000000000001FF] "" (1 blocks)


[PART] [0x0000000000000000-0x00000000000001FF] "" (1 blocks)


[PART] [0x0000000000000000-0x00000000000001FF] "" (1 blocks)


[PART] [0x0000000000000000-0x00000000000001FF] "" (1 blocks)


[PART] [0x0000000000000000-0x00000000000001FF] "" (1 blocks)


[PART] [0x0000000000000000-0x00000000000001FF] "" (1 blocks)


[PART] [0x000000D2DEE4E000-0x000000D3BDB1BBFF] "unknown" (7300718 blocks)


[LIB] HW ENC


[platform_vusb_on] PASS


can't find BQ24297 device.


[mt_charger_type_detection] chr_type: 2.





[PLFM] USB cable in


[TOOL] USB enum timeout (Yes), handshake timeout(Yes)


[TOOL] Enumeration(Start)


HS is detected


[TOOL] Enumeration(End): OK 484ms


[TOOL] : usb listen timeout


[TOOL] <USB> cannot detect tools!





[TOOL] <UART> wait sync time 150ms->5ms


[TOOL] <UART> receieved data: ()





Device APC domain init setup:





Domain Setup (0x0)


Domain Setup (0x0)


Device APC domain after setup:


Domain Setup (0x0)


Domain Setup (0x0)


mmc_rpmb_get_wc, mmc_set_part_config done!!


mmc_rpmb_get_wc, mmc_rpmb_pre_frame done!!


mmc_rpmb_send_command -> req_type=0x1, type=0x2, blks=0x1


mmc_rpmb_send_command -> req_type=0x2, type=0x2, blks=0x1


mmc_rpmb_get_wc, mmc_rpmb_start_req done!!


mmc_rpmb_get_wc, rpmb_req.result=0


[RPMB] RPMB Provisioned


mmc_rpmb_send_command -> req_type=0x1, type=0x4, blks=0x1


mmc_rpmb_send_command -> req_type=0x2, type=0x4, blks=0x1


[RPMB] Valid anti-rollback block exists


[PART] Image with part header


[PART] name : LK


[PART] addr : FFFFFFFFh mode : -1


[PART] size : 406500


[PART] magic: 58881688h


0:dram_rank_size:80000000


[PART] check_part_overlapped done





[PART] load "lk" from 0x0000000000A00200 (dev) to 0x4BD00000 (mem) [SUCCESS]


[PART] load speed: 2681KB/s, 406500 bytes, 148ms


[SECURITY]: board_id_{3,2,1} = {1,1,1}, is production device


[UNLOCKING] Read empty unlock code.


[BLDR] lk: rpmb provisioned eMMC, can only use prod signed lk


[VERIFY_LK]: trying to verify lk image with prod key


[VERIFY_LK] Succeed to pass the LK verification, version of LK is 0x2.


[BLDR] lk: the lk image is prod signed, verification successfully


 [PART] Image with part header


[PART] name : ATF


[PART] addr : FFFFFFFFh mode : 0


[PART] size : 38400


[PART] magic: 58881688h


0:dram_rank_size:80000000


[PART] check_part_overlapped done





[PART] load "tee1" from 0x0000000000B00200 (dev) to 0x4BE99840 (mem) [SUCCESS]


[PART] load speed: 2343KB/s, 38400 bytes, 16ms


bldr calling tee_verify_image 1


mtee_verify_decrypt call


tee_verify_image returned ret=0


[PART] Image with part header


[PART] name : TEE


[PART] addr : 9400000h mode : 0


[PART] size : 3520000


[PART] magic: 58881688h


0:dram_rank_size:80000000


0:dram_rank_size:80000000


[PART] check_part_overlapped done





[PART] load "tee1" from 0x0000000000B09A00 (dev) to 0xB6C00000 (mem) [SUCCESS]


[PART] load speed: 3033KB/s, 3520000 bytes, 1133ms


bldr calling tee_verify_image 2


mtee_verify_decrypt call


tee_verify_image returned ret=0


[TZ_INIT] TEE start entry : 0xB6C00000


[BLDR] bldr load tee part ret=0x0, addr=0x101000


[ANTI-ROLLBACK] Processing anti-rollback data





mmc_rpmb_send_command -> req_type=0x1, type=0x4, blks=0x1


mmc_rpmb_send_command -> req_type=0x2, type=0x4, blks=0x1


[ANTI-ROLLBACK] PL: 5 TEE: 107 LK: 2


[ANTI-ROLLBACK] Checksum validated


[ANTI-ROLLBACK] All checks passed


0:dram_rank_size:80000000


[PLFM] NON SECURE SRAM ADDR: 0x127000


[PLFM] NON SECURE SRAM SIZE: 0x9000


[PLFM] md_type[0] = 0


[PLFM] md_type[1] = 0





[PLFM] boot reason: 1


[PLFM] boot mode: 0


[PLFM] META COM0: 0


[PLFM] <0x4BE7F290>: 0x0


[PLFM] boot time: 7013ms


[PLFM] DDR reserve mode: enable = 0, success = 0


[PLFM] dram_buf_size: 0x1998C0


[PLFM] smc_boot_opt: 0x0


[PLFM] lk_boot_opt: 0x7


[PLFM] kernel_boot_opt: 0x5


[PLFM] tee_reserved_mem: 0x00000000B6BC0000, 0x0000000000040000


[TZ_INIT] hwuid[0] : 0xE4F759B7


[TZ_INIT] hwuid[1] : 0xF8070F17


[TZ_INIT] hwuid[2] : 0x9E5C992D


[TZ_INIT] hwuid[3] : 0xA10BBD70


[TZ_INIT] HRID[0] : 0xB696F2BE


[TZ_INIT] HRID[1] : 0x2CE9A854


[TZ_INIT] atf_log_port : 0x11002000


[TZ_INIT] atf_log_baudrate : 0xE1000


[TZ_INIT] atf_irq_num : 281


[TZ_INIT] ATF log buffer start : 0xB6BC0000


[TZ_INIT] ATF log buffer size : 0x40000


[TZ_INIT] ATF aee buffer start : 0xB6BFC000


[TZ_INIT] ATF aee buffer size : 0x4000


[BLDR] Others, jump to ATF





[BLDR] jump to 0x4BD00000


[BLDR] <0x4BD00000>=0xEA000007


[BLDR] <0x4BD00004>=0xEA00A9F3


[TZ_SEC_CFG] SRAMROM Secure Addr 0x27000


[TZ_SEC_CFG] SRAMROM Secure Control 0x0


[TZ_SEC_CFG] SRAMROM Secure Control 0xB69


[TZ_SEC_CFG] SRAMROM Secure Control 0x1B680B69


[TZ_EMI_MPU] MPU [0xB6C00000-0xBFFFFFFF]


[TZ_EMI_MPU] MPU 2GB Mode!!


[TZ_INIT] set secure memory protection : 0xB6C00000, 0xEA6E0


[TZ_INIT] Jump to ATF, then 0xB6C00000 and 0x4BD00000


[ATF][     7.029187]LK boot argument location=0x4be7f288

[ATF][     7.029933]KL boot argument size=0x1b8

[ATF][     7.030560]teearg->atf_magic=0x4d415446

[ATF][     7.031206]teearg->tee_support=0x1

[ATF][     7.031782]teearg->tee_entry=0xb6c00000

[ATF][     7.032428]teearg->tee_boot_arg_addr=0x100100

[ATF][     7.033144]teearg->atf_log_port=0x11002000

[ATF][     7.033826]teearg->atf_log_baudrate=0xe1000

[ATF][     7.034517]teearg->atf_log_buf_start=0xb6bc0000

[ATF][     7.035260]teearg->atf_log_buf_size=0x40000

[ATF][     7.035952]teearg->atf_irq_num=281

[ATF][     7.036531]BL33_START_ADDRESS=0x4bd00000

[ATF][     7.037188]atf chip_code[8172]
[ATF][     7.037696]atf chip_ver[1]
[ATF][     7.038153]bl31_setup

[ATF][     7.038565]RESET_TO_BL31

[ATF][     7.039022]mmap atf buffer : 0xb6bc0000, 0x40000

NOTICE:  BL3-1: v1.0(release):6b6cd45
NOTICE:  BL3-1: Built : 06:21:03, May 28 2018
[ATF][     7.044528]sta=0x0 int=0xffc


[ATF][     7.044955]is_power_on_boot: true
[ATF][     7.047832]mt_log_setup - atf_buf_addr : 0xb6bc0100
[ATF][     7.048472]mt_log_setup - atf_buf_size : 0x2bf00
[ATF][     7.049107]mt_log_setup - atf_write_pos : 0xb6bc0100
[ATF][     7.049785]mt_log_setup - atf_read_pos : 0xb6bc0100
[ATF][     7.050453]mt_log_setup - atf_buf_lock : 0x0
[ATF][     7.051045]mt_log_setup - mt_log_buf_end : 0xb6bebfff
[ATF][     7.051734]mt_log_setup - ATF_CRASH_LAST_LOG_SIZE : 0x8000
[ATF][     7.052477]mt_log_setup - ATF_EXCEPT_BUF_SIZE_PER_CPU : 0x1000
[ATF][     7.053263]mt_log_setup - ATF_EXCEPT_BUF_SIZE : 0x8000
[ATF][     7.053963]mt_log_setup - PLATFORM_CORE_COUNT : 0x8
[ATF][     7.054631]mt_log_setup - atf_except_write_pos_per_cpu[0]: 0xb6bf4000
[ATF][     7.055492]mt_log_setup - atf_except_write_pos_per_cpu[1]: 0xb6bf5000
[ATF][     7.056354]mt_log_setup - atf_except_write_pos_per_cpu[2]: 0xb6bf6000
[ATF][     7.057215]mt_log_setup - atf_except_write_pos_per_cpu[3]: 0xb6bf7000
[ATF][     7.058077]mt_log_setup - atf_except_write_pos_per_cpu[4]: 0xb6bf8000
[ATF][     7.058939]mt_log_setup - atf_except_write_pos_per_cpu[5]: 0xb6bf9000
[ATF][     7.059800]mt_log_setup - atf_except_write_pos_per_cpu[6]: 0xb6bfa000
[ATF][     7.060662]mt_log_setup - atf_except_write_pos_per_cpu[7]: 0xb6bfb000
[ATF][     7.061524]mt_log_setup - atf_crash_flag : 0x0
[ATF][     7.062138]mt_log_setup - atf_crash_log_addr : 0x0
[ATF][     7.062795]mt_log_setup - atf_crash_log_size : 0x0
[ATF][     7.063452]ATF log service is registered (0xb6bc0000, aee:0xb6bfc000)
[ATF][     7.064314]BL3-1: v1.0(release):6b6cd45
[ATF][     7.064852]BL3-1: Built : 06:21:03, May 28 2018
[ATF][     7.065527][BL31] Jump to secure OS for initialization!

[EMI] [MTEE] It is not an EMI Violation.@ta


[EMI] [MTEE] Leave EMI irq handler.@ta


[DAPC] [TEE] dapc_register_ext_handler is called by Type_2B slave(5)


[ATF][     7.069914][BL31] Final dump!

[0] PL boot_arg size = 440, LK boot_arg size = 440


[LEDS]LK: lcd-backlight level is 0



[0] [LEDS]LK: lcd-backlight level is 0



[LEDS]LK: mt65xx_led_set_cust


[backlight]:backlight_off


[0] [I2C-LK] i2c_write


[PWM] set reg[0x1401e008] = 0x00000000


[0] [LK_DDP/INFO]enable  pwm0  clk, CG0 0xffffffff, CG1 0xfffffffc


[PWM] set reg[0x140200ac] = 0x00800000


[PWM] set reg[0x140200b0] = 0x00000000


[PWM] set reg[0x1401e010] = 0x00000000


[PWM] set reg[0x1401e014] = 0x000003ff


[PWM] disp_pwm_set_backlight(id = 0x1, level_1024 = 0)


[PWM] set reg[0x1401e014] = 0x000003ff


[PWM] set reg[0x1401e000] = 0x00000000


[PWM] set reg[0x1401e008] = 0x00000001


[PWM] set reg[0x1401e008] = 0x00000000


[PWM] reg[0x1401e000] = 0x00000000


[PWM] reg[0x1401e004] = 0x00000000


[PWM] reg[0x1401e008] = 0x00000000


[PWM] reg[0x1401e00c] = 0x00000000


[PWM] reg[0x1401e010] = 0x00000000


[PWM] reg[0x1401e014] = 0x00000000


[PWM] reg[0x1401e018] = 0x00000000


[PWM] reg[0x1401e01c] = 0x00000000


[PWM] reg[0x1401e020] = 0x00000000


[PWM] reg[0x1401e024] = 0x00000000


[PWM] reg[0x1401e028] = 0x00000000


[PWM] set reg[0x140200a0] = 0x00000001


[0] [LK_pmic6397_init] Start...................


[0] [LK_PMIC_INIT] PMIC CID=0x2091


[0] [LK_PMIC_INIT_SETTING_V1] Done


[0] [LK_PMIC_CUSTOM_SETTING_V1] Done


[0] LK Ver=435C19E BUILD@(14_USE1B_B_18)


[0] LK Build Time=20180611_040355


[10] platform_init()


[10] [mmc_legacy_init]: msdc0 start in LK


[10] [mmc_legacy_init]: msdc0, start mmc_init_host() in LK


[10] [msdc_init]: msdc0 Host controller intialization start in LK


[10] [msdc_clock]: msdc0, pll[0xf020925c][bit0~1=0x1]=0x80000001, pll[0xf0209250][bit0=0x1]=0x111, mux[0xf0000070][bit15,23,31=0x1]=0x2060201, clk[0xf0003018][bit13=msdc0, bit14=msdc1]=0x10000000


[10] [msdc_clock]: msdc0, pll[0xf020925c][bit0~1=0x1]=0x80000001, pll[0xf0209250][bit0=0x1]=0x111, mux[0xf0000070][bit15,23,31=0x1]=0x2060201, clk[0xf0003018][bit13=msdc0, bit14=msdc1]=0x10000000


[10] [msdc_init]: msdc0 Host controller intialization done in LK


[10] [mmc_legacy_init]: msdc0 start mmc_init_card() in LK


[120] [mmc_legacy_init]: msdc0 mmc_addr_trans_tbl_init()


[130] [mmc_legacy_init]: msdc0 boot device found


[130] [mmc_legacy_init]: msdc0 init done in LK


[130] idme_initialize


[130] life_cycle_platform_init: Support MTK platform


[LK_ENV]read_env_area fail, ret = fffffffe


[LK_ENV]no valid env


[LCM-NT51021-WUXGA-DSI-VDO] lcm_get_params (line:338) :


[140] FB base = 0xb4bc0000, FB size = 33554432


[140] boot_mode_addr=0xb54a8000, lcdbase=0xb4bc0000,fb_addr=0xb4bc0000,fb_size=0x008e8000


[140] [LK_DDP/ddp_manager]ddp manager init


[LCM-NT51021-WUXGA-DSI-VDO] lcm_get_params (line:338) :


[140] [LK_DDP/ddp_manager]dpmgr_create_path handle 0x4bd6afb0 on scenario primary_disp


[140] [LK_DDP/ddp_manager]scenario primary_disp acquire mutex 0 , left mutex 0x1e!


[140] [LK_DDP/ddp_manager]assign default irqs table index 0


[140] [LK_DDP/ddp_manager]create handle 0x4bd6afb0 on scenario primary_disp


[140] [LK_DDP/ddp_manager] scenario primary_disp include module ovl0


[140] [LK_DDP/ddp_manager] scenario primary_disp include module color0


[140] [LK_DDP/ddp_manager] scenario primary_disp include module aal


[150] [LK_DDP/ddp_manager] scenario primary_disp include module od


[150] [LK_DDP/ddp_manager] scenario primary_disp include module rdma0


[150] [LK_DDP/ddp_manager] scenario primary_disp include module ufoe


[150] [LK_DDP/ddp_manager] scenario primary_disp include module pwm0


[150] [LK_DDP/ddp_manager] scenario primary_disp include module dsi0


[150] [LK_DDP/ddp_manager]set dst module on scenario primary_disp, module dsi0


[150] [LK_DDP/ddp_path]ddp_set_dst_module, scenario=primary_disp, dst_module=dsi0


[150] [LK_DDP/ddp_path]dsi0  is already on path


[150] [LK_DDP/ddp_manager]path set lcm drv handle 0x4bd6afb0


[150] [LK_DDP/ddp_manager]dsi0  set lcm utils


[LCM-NT51021-WUXGA-DSI-VDO] lcm_init_power (line:412) :


[150] board_id 0028001400010017 read


[150] board_id version 7 found


[LCM-NT51021-WUXGA-DSI-VDO] lcm_init_power (line:418) :board_id dvt read


[LCM-NT51021-WUXGA-DSI-VDO] lcm_set_gpio_output (line:319) :GPIO = 0x69, Output= 0x0


[LCM-NT51021-WUXGA-DSI-VDO] lcm_set_gpio_output (line:319) :GPIO = 0x69, Output= 0x1


[LCM-NT51021-WUXGA-DSI-VDO] lcm_init_power (line:463) :cmd_sel = 0x0


[170] [LK_DDP/ddp_manager]set scenario primary_disp mode Video Mode


[170] [LK_DDP/ddp_manager]path init on scenario primary_disp


[170] [LK_DDP/ddp_path]ddp path top clock on


[170] [LK_DDP/INFO]enable  smi_common  clk, CG0 0xfffffffc, CG1 0xfffffffc


[170] [LK_DDP/INFO]enable  smi_larb0  clk, CG0 0xfffffffc, CG1 0xfffffffc


[170] [LK_DDP/INFO]enable  mutex  clk, CG0 0xffff7ffc, CG1 0xfffffffc


[170] [LK_DDP/ddp_path]ddp CG0:ffff7ffc CG1:fffffffc


[170] [LK_DDP/ddp_path]mutex sof: dsi0 dst module dsi0 :vido_mode


[170] [LK_DDP/ddp_path]module ovl0  added to mutex 0


[170] [LK_DDP/ddp_path]module color0  added to mutex 0


[170] [LK_DDP/ddp_path]module aal  added to mutex 0


[170] [LK_DDP/ddp_path]module od  added to mutex 0


[180] [LK_DDP/ddp_path]module rdma0  added to mutex 0


[180] [LK_DDP/ddp_path]module ufoe  added to mutex 0


[180] [LK_DDP/ddp_path]module pwm0  added to mutex 0


[180] [LK_DDP/ddp_path]mutex 0 value=0x2d42800, sof=dsi0


[180] [LK_DDP/ddp_path]path connect on scenario primary_disp


[180] [LK_DDP/ddp_path]connect_path: ovl0  to dsi0


[180] [LK_DDP/ddp_path]connect mout ovl0  to color0   value 0x1


[180] [LK_DDP/ddp_path]connect mout od  to rdma0   value 0x1


[180] [LK_DDP/ddp_path]connect mout ufoe  to dsi0   value 0x1


[180] [LK_DDP/ddp_path]connect out_s color0  to aal , bits=0x0


[180] [LK_DDP/ddp_path]connect out_s rdma0  to ufoe , bits=0x0


[180] [LK_DDP/ddp_path]connect out_s rdma0  to ufoe , bits=0x0


[180] [LK_DDP/ddp_path]connect in_s ovl0  to color0 , bits=0x1


[180] [LK_DDP/ddp_path]connect in_s color0  to aal , bits=0x0


[180] [LK_DDP/ddp_path]connect in_s rdma0  to ufoe , bits=0x0


[190] [LK_DDP/ddp_path]connect in_s rdma0  to ufoe , bits=0x0


[190] [LK_DDP/ddp_path]connect in_s ufoe  to dsi0 , bits=0x0


[190] [LK_DDP/ddp_path]connect in_s ufoe  to dsi0 , bits=0x0


[190] [LK_DDP/ddp_path]connect in_s ufoe  to dsi0 , bits=0x0


[190] [LK_DDP/ddp_manager]scenario primary_disp init module  ovl0


[190] [LK_DDP/INFO]enable  ovl0  clk, CG0 0xfffe7ffc, CG1 0xfffffffc


[190] [LK_DDP/OVL]OVL0Init open CG 0xfffe7ffc


[190] [LK_DDP/ddp_manager]scenario primary_disp init module  color0


[190] [LK_DDP/INFO]enable  color0  clk, CG0 0xff7e7ffc, CG1 0xfffffffc


[190] [LK_DDP/ddp_manager]scenario primary_disp init module  aal


[190] [LK_DDP/INFO]enable  aal  clk, CG0 0xfd7e7ffc, CG1 0xfffffffc


[190] [LK_DDP/ddp_manager]scenario primary_disp init module  od


[190] [LK_DDP/INFO]enable  od  clk, CG0 0x7d7e7ffc, CG1 0xfffffffc


[190] [LK_DDP/ddp_manager]scenario primary_disp init module  rdma0


[200] [LK_DDP/INFO]enable  rdma0  clk, CG0 0x7d7a7ffc, CG1 0xfffffffc


[200] [LK_DDP/RDMA]RDMA0Init CG 0x7d7a7ffc


[200] [LK_DDP/ddp_manager]scenario primary_disp init module  ufoe


[200] [LK_DDP/ddp_manager]scenario primary_disp init module  dsi0


[200] [LK_DDP/INFO]enable  dsi0  clk, CG0 0x7d7a7ffc, CG1 0xffffffcc


[200] [LK_DDP/ddp_manager]path config ovl 0, rdma 0, wdma 0, dst 1 on handle 0x4bd6afb0 scenario primary_disp


[200] [LK_DDP/ddp_manager]scenario primary_disp  config module ovl0


[200] [LK_DDP/ddp_manager]scenario primary_disp  config module color0


[200] [LK_DDP/ddp_manager]scenario primary_disp  config module aal


[200] [LK_DDP/ddp_manager]scenario primary_disp  config module od


[200] [LK_DDP/ddp_manager]scenario primary_disp  config module rdma0


[200] [LK_DDP/ddp_manager]scenario primary_disp  config module ufoe


[200] [LK_DDP/ddp_manager]scenario primary_disp  config module dsi0


[LCM-NT51021-WUXGA-DSI-VDO] lcm_init (line:402) :


[LCM-NT51021-WUXGA-DSI-VDO] get_lcm_id (line:142) :vendor_id = 0x0


[LCM-NT51021-WUXGA-DSI-VDO] init_lcm_registers (line:165) :Init INX registers


[LCM-NT51021-WUXGA-DSI-VDO] init_lcm_registers (line:168) :Force sending by MIPI


[LCM-NT51021-WUXGA-DSI-VDO] init_lcm_registers (line:179) :Force sending by MIPI


[LCM-NT51021-WUXGA-DSI-VDO] init_lcm_registers (line:220) :Exit force sending


[260] DSI0 state:Waiting RX-read data


[260] DSI Mode: lane num: transfer count: status: [260] ---------- Start dump DSI0 registers ----------


[260] DSI+0000 : 0x00000001  0x00000000  0x00000003  0x80000000


[260] DSI+0010 : 0x00000002  0x00000000  0x0000023c  0x00030e10


[260] DSI+0020 : 0x00000001  0x0000000e  0x0000000b  0x00000780


[260] DSI+0030 : 0x00000000  0x00000000  0x00000000  0x00000000


[260] DSI+0040 : 0x00000000  0x00000000  0x00000000  0x00000000


[260] DSI+0050 : 0x00000004  0x0000005c  0x000000f0  0x00000000


[260] DSI+0060 : 0x00000001  0x00000ee0  0x00000000  0x00000000


[260] DSI+0070 : 0x00000000  0x00000000  0x00000000  0x00000000


[270] DSI+0080 : 0x00000000  0x00000000  0x00000020  0x00000000


[270] DSI+0090 : 0x0000003c  0x00000000  0x00000000  0x00000000


[270] DSI+00a0 : 0x00000000  0x00000000  0x00000000  0x00000000


[270] DSI+00b0 : 0x00000000  0x00000000  0x00000000  0x00000000


[270] DSI+00c0 : 0x00000000  0x00000000  0x00000000  0x00000000


[270] DSI+00d0 : 0x00000000  0x00000000  0x00000000  0x00000000


[270] DSI+00e0 : 0x00000000  0x00000000  0x00000000  0x00000000


[270] DSI+00f0 : 0x00000000  0x00000000  0x00000000  0x00000000


[270] DSI+0100 : 0x00000055  0x00000000  0x00000000  0x00000000


[270] DSI+0110 : 0x0b0b0808  0x010a0c08  0x0b100000  0x00060807


[270] DSI+0120 : 0x00023000  0x00000000  0x00000000  0x00000000


[270] DSI+0130 : 0x00000021  0x00000000  0x00000000  0x00000000


[270] DSI+0140 : 0x00000000  0x0000ffff  0x00010001  0x01010100


[270] DSI+0150 : 0x01080001  0x01010101  0x00000101  0x10000000


[280] DSI+0160 : 0x00010200  0x00000001  0x00000000  0x00000000


[280] DSI+0170 : 0x00000000  0xfff00000  0x00000000  0x00200000


[280] DSI_CMD+0000 : 0x000a0604  0x8b921e3e  0xc8004517  0x8eb26afa


[280] DSI_CMD+0010 : 0x4e9b9ad3  0xe2aa208b  0xefb12ff9  0xaa1cbeaa


[280] DSI_CMD+0020 : 0xb294fd9c  0x15595eeb  0xe9b6772a  0x39aa42c2


[280] DSI_CMD+0030 : 0x9bfca6e8  0xeabe46aa  0x8aa3a379  0xb8aa6b81


[280] DSI_CMD+0040 : 0x830cc223  0x06c4e828  0x94c0cf24  0x6683aaa8


[280] DSI_CMD+0050 : 0xa32e9481  0x6242e235  0x293be28a  0x34a173a2


[280] DSI_CMD+0060 : 0x293af1af  0x18cbb603  0xc3b6f330  0xe0ceaeaf


[280] DSI_CMD+0070 : 0xf3baa08e  0x04ab63a9  0xba98dafc  0x285db88b


[280] DSI_CMD+0080 : 0xabf87fa2  0x0a2e6aa0  0xd23c1aaf  0xf0aaeeee


[280] DSI_CMD+0090 : 0xebca52e8  0x31baa823  0xb6e88e6a  0xbe22e83b


[280] DSI_CMD+00a0 : 0xff055232  0xbcf63bb8  0x7c0533cb  0x72f380a2


[280] DSI_CMD+00b0 : 0x3f6b3246  0xa0cb8a9e  0xacd513e1  0x5d8e8a8e


[290] DSI_CMD+00c0 : 0xe39273a9  0xe6ee3249  0x3e293e08  0xb30ca38e


[290] DSI_CMD+00d0 : 0xa3f8bb30  0xcb2a9a8e  0xf0990b8c  0x9cde00a3


[290] DSI_CMD+00e0 : 0xaa8dfaac  0x3631fb2a  0x3f2ae8c8  0xa40a7f3b


[290] DSI_CMD+00f0 : 0xfabe4e0a  0x9e27d18b  0x5bc66b2b  0x950ef882


[290] DSI_CMD+0100 : 0xadc9e70c  0x202cda7b  0x9a5a5a38  0xfdd60b96


[290] DSI_CMD+0110 : 0xbf29fb08  0x92781e2f  0x2b8be389  0xf19493eb


[290] DSI_CMD+0120 : 0x2b2a630b  0x50f78be0  0x62a00ece  0xb01ba98a


[290] DSI_CMD+0130 : 0xaaa787b8  0xa0098b25  0x328f20c0  0xac32aa6b


[290] DSI_CMD+0140 : 0x3bf363b6  0xc2232291  0xba1470e4  0x4cea6aaa


[290] DSI_CMD+0150 : 0xae839d6a  0x9a031848  0xa641c8e2  0x101f88a5


[290] DSI_CMD+0160 : 0xa72e7aaa  0xd88ae5ac  0xc81b9a98  0xcae56239


[290] DSI_CMD+0170 : 0x4c23d076  0xfa47e79d  0xcea947e3  0x3b2bbaac


[290] DSI_CMD+0180 : 0x42aa8bb0  0x4d21a2ab  0x2a13c8a8  0xcd507c22


[300] DSI_CMD+0190 : 0xa8021bb8  0xd8772ae6  0xe0a48be8  0x4ab6b9fe


[300] DSI_CMD+01a0 : 0x731330ac  0x6ed4929b  0xaa3f627a  0xd6c5bbc8


[300] DSI_CMD+01b0 : 0x09186783  0xbeae0a88  0xbbea6aee  0x3eef70fa


[300] DSI_CMD+01c0 : 0xae70c958  0x70ee4b2a  0xa57fcb82  0x06a13adb


[300] DSI_CMD+01d0 : 0x4a302b0a  0xd4228ad8  0xe85113cc  0xc3d7aa38


[300] DSI_CMD+01e0 : 0xcf78f937  0xa89edbab  0xd8b1a3b6  0xdbbcb229


[300] DSI_CMD+01f0 : 0xefa1b221  0x832aebdb  0x80a88ef4  0xfafa938f


[300] DSI_PHY+0000 : 0x00000403    0x00000f03  0x00000801  0x00000801


[300] DSI_PHY+0010 : 0x00000801    0x00000801  0x00000000  0x00000000


[300] DSI_PHY+0020 : 0x00000000    0x00000000  0x00000000  0x00000000


[300] DSI_PHY+0030 : 0x00000000    0x00000000  0x00000000  0x00000000


[300] DSI_PHY+0040 : 0x00000082    0x88492483  0x00000000  0x00000000


[300] DSI_PHY+0050 : 0x00000001    0x01b10007  0x4b627627  0x08e808e8


[310] DSI_PHY+0060 : 0x00000001    0x00000020  0x00000101  0x00000000


[310] DSI_PHY+0070 : 0x00000000    0x00000000  0x00000000  0x00043210


[310] DSI_PHY+0080 : 0x00000000    0x00000000  0x00000000  0x00000000


[310] DSI_PHY+0090 : 0x00000000    0x00000000  0x00000000  0x00000000


[310] [LK_DDP/ddp_manager]map event 7 to irq 0x30004 on scenario primary_disp


[310] [LK_DDP/ddp_manager]enable event on scenario primary_disp, event 7, irtbit 0x30004


[310] [LK_DDP/ddp_manager]enable event on scenario primary_disp, event 1, irtbit 0x30004


[320] [LK_DDP/ddp_manager]path check busy on scenario primary_disp


[320] [LK_DDP/ddp_manager]path config ovl 1, rdma 0, wdma 0, dst 0 on handle 0x4bd6afb0 scenario primary_disp


[320] [LK_DDP/ddp_manager]scenario primary_disp  config module ovl0


[320] [LK_DDP/OVL]module 1, layer=3, en=1, src=0, fmt=0x1001020, addr=0xb54a8000, x=0, y=0, pitch=2400, dst(0, 0, 1200, 1920),keyEn=0x1, key=0xff000000, aen=0, alpha=160


[320] [LK_DDP/ddp_manager]scenario primary_disp  config module color0


[320] [LK_DDP/ddp_manager]scenario primary_disp  config module aal


[330] [LK_DDP/ddp_manager]scenario primary_disp  config module od


[330] [LK_DDP/ddp_manager]scenario primary_disp  config module rdma0


[330] [LK_DDP/ddp_manager]scenario primary_disp  config module ufoe


[330] [LK_DDP/ddp_manager]scenario primary_disp  config module dsi0


[330] [LK_DDP/ddp_manager]path check busy on scenario primary_disp


[330] [LK_DDP/ddp_manager]path config ovl 1, rdma 0, wdma 0, dst 0 on handle 0x4bd6afb0 scenario primary_disp


[330] [LK_DDP/ddp_manager]scenario primary_disp  config module ovl0


[330] [LK_DDP/OVL]module 1, layer=2, en=1, src=0, fmt=0x1002002, addr=0xb4bc0000, x=0, y=0, pitch=4864, dst(0, 0, 1200, 1920),keyEn=0x0, key=0x0, aen=1, alpha=255


[330] [LK_DDP/OVL]module 1, layer=3, en=1, src=0, fmt=0x1001020, addr=0xb54a8000, x=0, y=0, pitch=2400, dst(0, 0, 1200, 1920),keyEn=0x1, key=0xff000000, aen=0, alpha=160


[330] [LK_DDP/ddp_manager]scenario primary_disp  config module color0


[340] [LK_DDP/ddp_manager]scenario primary_disp  config module aal


[340] [LK_DDP/ddp_manager]scenario primary_disp  config module od


[340] [LK_DDP/ddp_manager]scenario primary_disp  config module rdma0


[340] [LK_DDP/ddp_manager]scenario primary_disp  config module ufoe


[340] [LK_DDP/ddp_manager]scenario primary_disp  config module dsi0


[340] [PROFILE] ------- disp init takes 203 ms --------


[340] s_mt65xx_gd.gdfIndex=2[340] [PROFILE] ------- load_logo takes 0 ms --------


[340] find BQ24296 device and register charger control.


[340] [I2C-LK] i2c_write


[340] [I2C-LK] i2c_write


[500] [AUXADC] adc_result_temp=885, adc_result=4148, r_val_temp=4


[570] [AUXADC] adc_result_temp=686, adc_result=803, r_val_temp=1


[570] HW board ID 0x7


[570] BattVoltToTemp() : TBAT_OVER_CRITICAL_LOW = 499900


[570] BattVoltToTemp() : RBAT_PULL_UP_VOLT = 1200


[570] BattVoltToTemp() : RbatPullUpR = 24000


[570] BattVoltToTemp() : dwVolt = 803


[570] BattVoltToTemp() : TRes = 48544


[570] BattVoltToTemp() : sBaTTMP = 24


[570] check VBAT=4148 mV with 3500 mV


[570] is_low_battery, FALSE


[570] [PROFILE] ------- backlight takes 0 ms --------


kedump mini start


kedump: boot_reason(1)


RAM_CONSOLE. sram(0x10dc00) sig 0 mismatch


RAM_CONSOLE. start: 0x44400000, size: 0x80000


RAM_CONSOLE. lk size mismatch 0 + c0 != 100


detecting pmic just reset


[570] [mboot_recovery_load_misc]: size is 6144


[570] [mboot_recovery_load_misc]: misc_addr is 0x4bddbdfc


[580] [LK_BOOT] Load 'MISC' partition to 0x4BDDBDFC (6144 bytes in 5 ms)


[580] MT65XX_RECOVERY_KEY 0x0


mtk detect key function key = 0


mtk detect key function key = 0


mtk detect key function key = 0


mtk detect key function key = 0


mtk detect key function key = 0


mtk detect key function key = 0


mtk detect key function key = 0


mtk detect key function key = 0


mtk detect key function key = 0


mtk detect key function key = 0


mtk detect key function key = 0


mtk detect key function key = 0


mtk detect key function key = 0


mtk detect key function key = 0


mtk detect key function key = 0


mtk detect key function key = 0


mtk detect key function key = 0


mtk detect key function key = 0


mtk detect key function key = 0


mtk detect key function key = 0


mtk detect key function key = 0


mtk detect key function key = 0


mtk detect key function key = 0


mtk detect key function key = 0


mtk detect key function key = 0


mtk detect key function key = 0


mtk detect key function key = 0


mtk detect key function key = 0


mtk detect key function key = 0


mtk detect key function key = 0


mtk detect key function key = 0


mtk detect key function key = 0


mtk detect key function key = 0


mtk detect key function key = 0


mtk detect key function key = 0


mtk detect key function key = 0


mtk detect key function key = 0


mtk detect key function key = 0


mtk detect key function key = 0


mtk detect key function key = 0


mtk detect key function key = 0


mtk detect key function key = 0


mtk detect key function key = 0


mtk detect key function key = 0


mtk detect key function key = 0


mtk detect key function key = 0


mtk detect key function key = 0


mtk detect key function key = 0


mtk detect key function key = 0


mtk detect key function key = 0


mtk detect key function key = 0


mtk detect key function key = 0


mtk detect key function key = 0


mtk detect key function key = 0


mtk detect key function key = 0


mtk detect key function key = 0


mtk detect key function key = 0


mtk detect key function key = 0


mtk detect key function key = 0


mtk detect key function key = 0


mtk detect key function key = 0


mtk detect key function key = 0


mtk detect key function key = 0


mtk detect key function key = 0


mtk detect key function key = 0


mtk detect key function key = 0


mtk detect key function key = 0


mtk detect key function key = 0


mtk detect key function key = 0


mtk detect key function key = 0


mtk detect key function key = 0


mtk detect key function key = 0


mtk detect key function key = 0


mtk detect key function key = 0


mtk detect key function key = 0


mtk detect key function key = 0


mtk detect key function key = 0


mtk detect key function key = 0


mtk detect key function key = 0


mtk detect key function key = 0


mtk detect key function key = 0


mtk detect key function key = 0


mtk detect key function key = 0


mtk detect key function key = 0


mtk detect key function key = 0


mtk detect key function key = 0


mtk detect key function key = 0


mtk detect key function key = 0


mtk detect key function key = 0


mtk detect key function key = 0


mtk detect key function key = 0


mtk detect key function key = 0


mtk detect key function key = 0


mtk detect key function key = 0


mtk detect key function key = 0


mtk detect key function key = 0


mtk detect key function key = 0


mtk detect key function key = 0


mtk detect key function key = 0


mtk detect key function key = 0


mtk detect key function key = 0


mtk detect key function key = 0


mtk detect key function key = 0


mtk detect key function key = 0


mtk detect key function key = 0


mtk detect key function key = 0


mtk detect key function key = 0


mtk detect key function key = 0


mtk detect key function key = 0


mtk detect key function key = 0


mtk detect key function key = 0


mtk detect key function key = 0


mtk detect key function key = 0


mtk detect key function key = 0


mtk detect key function key = 0


mtk detect key function key = 0


mtk detect key function key = 0


mtk detect key function key = 0


mtk detect key function key = 0


mtk detect key function key = 0


mtk detect key function key = 0


mtk detect key function key = 0


mtk detect key function key = 0


mtk detect key function key = 0


mtk detect key function key = 0


mtk detect key function key = 0


mtk detect key function key = 0


mtk detect key function key = 0


mtk detect key function key = 0


mtk detect key function key = 0


mtk detect key function key = 0


mtk detect key function key = 0


mtk detect key function key = 0


mtk detect key function key = 0


mtk detect key function key = 0


[630] [pmic_detect_powerkey] Release


[630] By-pass kernel power-off charging!


< Kernel Enter Normal Boot >


[630] [PROFILE] ------- boot mode select takes 61 ms --------


[920] detected charger type: 2.


[920] init usb for CDP port.


[960] [I2C-LK] i2c_write


[960] [I2C-LK] i2c_write


[960] [I2C-LK] i2c_write


[960] [I2C-LK] i2c_write


[960] [I2C-LK] i2c_write


[960] [I2C-LK] i2c_write


[960] [I2C-LK] i2c_write


[970] [I2C-LK] i2c_write


[970] [I2C-LK] i2c_write


[970] [I2C-LK] i2c_write


[970] [I2C-LK] i2c_write


[970] [I2C-LK] i2c_write


[970] [I2C-LK] i2c_write


[970] [I2C-LK] i2c_write


[980] [I2C-LK] i2c_write


[980] [bq24297_dump_register] Reg[0x0]=0x4A


[980] [bq24297_dump_register] Reg[0x1]=0xB


[980] [bq24297_dump_register] Reg[0x2]=0x50


[980] [bq24297_dump_register] Reg[0x3]=0x10


[980] [bq24297_dump_register] Reg[0x4]=0xD6


[980] [bq24297_dump_register] Reg[0x5]=0x9C


[980] [bq24297_dump_register] Reg[0x6]=0x73


[990] [bq24297_dump_register] Reg[0x7]=0x9


[990] [bq24297_dump_register] Reg[0x8]=0x44


[990] [bq24297_dump_register] Reg[0x9]=0x0


[990] [bq24297_dump_register] Reg[0xA]=0x20


[990] [PROFILE] ------- battery init takes 356 ms --------


[990] [PROFILE] ------- RTC boot check Init  takes 0 ms --------


[990] [PROFILE] ------- sw_env takes 0 ms --------


[990] mt_disp_show_boot_logo #911


[990] [lk logo: mt_disp_show_boot_logo 133]


[990] [lk logo: init_fb_screen 61]


[990] [lk logo: sync_anim_version 44]


[990] [lk logo: init_fb_screen 100]pinfo[0]=0x00001148, pinfo[1]=0x01200640, pinfo[2]=268435456


[990] [lk logo: init_fb_screen 102]define ANIMATION_NEW:show new animation with capacity num


[990] [lk logo: init_fb_screen 103]CAPACITY_LEFT =447, CAPACITY_TOP =803


[1000] [lk logo: init_fb_screen 104]LCM_HEIGHT=751, LCM_WIDTH=1289


[1000] [decompress_logo decompress_logo 48]in=0x4bd5d8c0, out=0xb5d90000, inlen=6105, logolen=214200


[1000] [decompress_logo decompress_logo 97]have=214200


[1000] fill_logo_to_framebuffer:: bits = 32


[1000] [show_logo_common: fill_rect_with_content 427]


[1000] [show_logo_common: fill_rect_with_content_by_32bit_argb8888 128]


[1000] [show_logo_common]dst_addr= 0xff000000, color_addr= 0xff000000, i= 790, j=442


[1000] [show_logo_common]dst_addr= 0xff000000, color_addr= 0xff000000, i= 790, j=756


[1010] [show_logo_common]dst_addr= 0xff000000, color_addr= 0xff000000, i= 959, j=442


[1010] [show_logo_common]dst_addr= 0xff000000, color_addr= 0xff000000, i= 959, j=756


[1010] fb dump:fb_addr(va)=0xb4bc0000, 0x00000000, 0x00000000, 0x00000000, 0x00000000


[1010] [LK_DDP/ddp_manager]path check busy on scenario primary_disp


[1010] [LK_DDP/ddp_manager]path start on scenario primary_disp


[1010] [LK_DDP/ddp_manager]scenario primary_disp start module  ovl0


[1010] [LK_DDP/ddp_manager]scenario primary_disp start module  rdma0


[1010] [LK_DDP/ddp_manager]scenario primary_disp start module  ufoe


[1010] [LK_DDP/UFOE]ufoe_start, ufoe_start:0x4


[1020] [LK_DDP/ddp_manager]scenario primary_disp start module  dsi0


[1020] [LK_DDP/ddp_manager]dpmgr_path_trigger on scenario primary_disp


[1020] [LK_DDP/ddp_path]mutex 0 enable


[1020] [LK_DDP/ddp_manager]dsi0  trigger


[LEDS]LK: mt65xx_backlight_on



[LEDS]LK: lcd-backlight level is 255



[1020] [LEDS]LK: lcd-backlight level is 255



[LEDS]LK: mt65xx_led_set_cust


[backlight]:backlight_on


[1170] [I2C-LK] i2c_write


[1170] [I2C-LK] i2c_write


[1170] [I2C-LK] i2c_write


[1170] [I2C-LK] i2c_write


[1170] [I2C-LK] i2c_write


[1170] [I2C-LK] i2c_write


[1170] [I2C-LK] i2c_write


[1170] [I2C-LK] i2c_write


[1180] [I2C-LK] i2c_write


[1180] [I2C-LK] i2c_write


[PWM] set reg[0x1401e008] = 0x00000000


[1180] [LK_DDP/INFO]enable  pwm0  clk, CG0 0x7d7a7ffc, CG1 0xffffffcc


[PWM] disp_pwm_set_backlight(id = 0x1, level_1024 = 1023)


[PWM] set reg[0x1401e014] = 0x03ff03ff


[PWM] set reg[0x1401e000] = 0x00000001


[PWM] disp_pwm_set_enabled: PWN_EN = 0x1


[PWM] set reg[0x1401e008] = 0x00000001


[PWM] set reg[0x1401e008] = 0x00000000


[PWM] reg[0x1401e000] = 0x00000001


[PWM] reg[0x1401e004] = 0x00000000


[PWM] reg[0x1401e008] = 0x00000000


[PWM] reg[0x1401e00c] = 0x00000000


[PWM] reg[0x1401e010] = 0x00000000


[PWM] reg[0x1401e014] = 0x00000000


[PWM] reg[0x1401e018] = 0x00000000


[PWM] reg[0x1401e01c] = 0x00000000


[PWM] reg[0x1401e020] = 0x00000000


[PWM] reg[0x1401e024] = 0x00000000


[PWM] reg[0x1401e028] = 0x00000000


[PWM] set reg[0x140200a0] = 0x00000001


[1190] [PROFILE] ------- show logo takes 195 ms --------


[1190] [PROFILE] ------- platform_init takes 1182 ms --------


[1190] [LK_TARGET_INIT] board_id dvt read


[1190] [LK_TARGET_INIT] vgp5 1.8v enabled


[1190] [LK_TARGET_INIT] VGP2 disabled


[1200] part page addr is 0x739f80000


[1200]


============================================================


[1200] [LK_BOOT] Android Partition Name		        : boot


[1200] [LK_BOOT] Android Boot IMG Hdr - Magic	        : ANDROID


[1200] [LK_BOOT] Android Boot IMG Hdr - Kernel Size	: 0x6d003e4


[1200] [LK_BOOT] Android Boot IMG Hdr - Rootfs Size	: 0x0


[1200] [LK_BOOT] Android Boot IMG Hdr - Page Size	: 0x800


[1200] ============================================================


[1200]  > page count of kernel image = 55809


[1200]  > kernel mem offset = 0x45000000


[1210]  > rootfs mem offset = 0x4bd00800


[1210]  > dtb mem offset = 0x0


[1210]  > boot image size = 0x6d01800


[1210]


read the data of boot (size = 0x6d01800)


[1210]  > from - 0x0000000739f80800 (skip boot img hdr)


[1210]  > to   - 0x45000000 (starts with kernel img hdr)


This is LK-payload by xyz. Copyright 2019
64-Bit version for suez by k4y0z. Copyright 2019
found lk at 0x00005000
found misc at 0x0001E400
found boot_x at 0x00022800
found recovery_x at 0x0002A800
found boot at 0x039CFC00
found recovery at 0x03A06C00
bootloader_msg:
g_boot_mode 0
Clean lk
[3870] part page addr is 0x739f80000


read_func hook
block_off 0x0000000A 0x39F80000
dev 0x4BD69718 dst 0x4BDDD538 sz 0x00000260 part 0x00000008
[3870]


============================================================


[3870] [LK_BOOT] Android Partition Name		        : boot


[3870] [LK_BOOT] Android Boot IMG Hdr - Magic	        : ANDROID


[3870] [LK_BOOT] Android Boot IMG Hdr - Kernel Size	: 0x6e66db


[3880] [LK_BOOT] Android Boot IMG Hdr - Rootfs Size	: 0x19d5bf


[3880] [LK_BOOT] Android Boot IMG Hdr - Page Size	: 0x800


[3880] ============================================================


[3880]  > page count of kernel image = 3533


[3880]  > kernel mem offset = 0x45000000


[3880]  > rootfs mem offset = 0x456e6800


[3880]  > dtb mem offset = 0x0


[3880]  > boot image size = 0x885000


[3880]


read the data of boot (size = 0x885000)


[3880]  > from - 0x0000000739f80800 (skip boot img hdr)


[3880]  > to   - 0x45000000 (starts with kernel img hdr)


read_func hook
block_off 0x0000000A 0x39F80000
dev 0x4BD69718 dst 0x44FFF800 sz 0x00885000 part 0x00000008
LK: Device is unlocked


[4090] [PROFILE] ------- load boot.img takes 224 ms --------


[4090] [LK_DDP/RDMA] RDMA0 polling interrupt ret =19999


[4100] [LK_DDP/RDMA] RDMA0 polling interrupt ret =19891


[4120] [LK_DDP/RDMA] RDMA0 polling interrupt ret =19842


[4140] [LK_DDP/RDMA] RDMA0 polling interrupt ret =19841


[4140] mt_disp_get_lcd_time, fps=6025


[4140] testing dt: version=dvt


[4140] dvt dt found


[4420] model=MT8173


[4440] Not Support VCORE DVFS


[4440] PTP_INFO Only support in MT6795


start dump lk masp atag


dump sw sbc:0, sw sdl:0 , hw sbc: 1


dump lock_state, 1


dump rid, ee80d0f8, 17a6d1fd, 8278c69f, 6b91be0b


[4450] create masp atag OK


[4450] tee_reserved_mem not supported


[4450] non_secure_sram not supported


[4450] [PROFILE] ------- boot_time takes 4481 ms --------


[LK_ENV]get_env hibboot


[LK_ENV]get_env resume


[4450] resume = NULL


[4450] booting linux @ 0x40080000, ramdisk @ 0x43480000 (1693119)


[LEDS]LK: red level is 0



[4450] [LEDS]LK: red level is 0



[LEDS]LK: mt65xx_led_set_cust


[LEDS]LK: green level is 0



[4450] [LEDS]LK: green level is 0



[LEDS]LK: mt65xx_led_set_cust


[LEDS]LK: blue level is 0



[4450] [LEDS]LK: blue level is 0



[LEDS]LK: mt65xx_led_set_cust


[4450] DRAM Rank :1


[4450] DRAM Rank[0] Start = 0x40000000, Size = 0x76bc0000


[4450] mtk_write_boot_reason: current 0x8001 boot_reason 0x104


[4450] cmdline: console=tty0 console=ttyS0,921600n1 console=ttyMT0,921600n1 root=/dev/ram androidboot.hardware=mt8173 bootopt=64S3,32N2,64N2 androidboot.selinux=permissive buildvariant=eng lcm=0-nt51021_wuxga_dsi_vdo fps=6025 vram=33554432 androidboot.selinux=en[4450] lk boot time = 4481 ms


[4450] lk boot mode = 0


[4450] lk boot reason = usb


[4450] wdt boot reason = 0


[4450] lk finished --> jump to linux kernel 64Bit





[4450]


[LK]jump to K64 0x40080000


[    0.000000] <0>-(0)[0:swapper]Initializing cgroup subsys cpu

[    0.000000] <0>-(0)[0:swapper]Initializing cgroup subsys cpuacct

[    0.000000] <0>-(0)[0:swapper]Linux version 3.18.19+ (chaosmaster@chaos64) (gcc version 4.9.x 20150123 (prerelease) (GCC) ) #2 SMP PREEMPT Mon Apr 8 20:17:07 CEST 2019

[    0.000000] <0>-(0)[0:swapper]CPU: AArch64 Processor [410fd032] revision 2

[    0.000000] <0>-(0)[0:swapper]Detected VIPT I-cache on CPU0

[    0.000000] <0>-(0)[0:swapper]alternative: enabling workaround for ARM errata 826319, 827319, 824069

[    0.000000] <0>-(0)[0:swapper]alternative: enabling workaround for ARM erratum 845719

[    0.000000] <0>-(0)[0:swapper]efi: Getting EFI parameters from FDT:

[    0.000000] <0>-(0)[0:swapper]efi: UEFI not found.

[    0.000000] <0>-(0)[0:swapper][PHY layout]fb-reserved-memory   :   0xb4bc0000 - 0xb6bbffff (0x2000000)

[    0.000000] <0>-(0)[0:swapper][PHY layout]secos-reserved-memory   :   0xb6c00000 - 0xbfffffff (0x9400000)

[    0.000000] <0>-(0)[0:swapper][PHY layout]dumyreadbuffer@7ffff000   :   0x5ffff000 - 0x60000fff (0x2000)

[    0.000000] <0>-(0)[0:swapper][PHY layout]kernel   :   0x40000000 - 0x5fffefff (0x1ffff000)

[    0.000000] <0>-(0)[0:swapper][PHY layout]kernel   :   0x60001000 - 0xb4bbffff (0x54bbf000)

[    0.000000] <0>-(0)[0:swapper]psci: probing for conduit method from DT.

[    0.000000] <0>-(0)[0:swapper]psci: Using PSCI v0.1 Function IDs from DT

[    0.000000] <0>-(0)[0:swapper]PERCPU: Embedded 16 pages/cpu @ffffffc074b20000 s26816 r8192 d30528 u65536

[    0.000000] <0>-(0)[0:swapper]Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 471604

[    0.000000] <0>-(0)[0:swapper][cpu_ntf] <00>ffffffc00014f51c (page_alloc_cpu_notify)

[    0.000000] <0>-(0)[0:swapper]Kernel command line: console=tty0 console=ttyS0,921600n1 console=ttyMT0,921600n1 root=/dev/ram androidboot.hardware=mt8173 bootopt=64S3,32N2,64N2 androidboot.selinux=permissive buildvariant=eng lcm=0-nt51021_wuxga_dsi_vdo fps=6025 vram=33554432 androidboot.selinux=enforcing printk.disable_uart=0 bootprof.pl_t=7013 bootprof.lk_t=4481 boot_reason=1 androidboot.serialno=G000N6078455132T androidboot.bootreason=usb androidboot.barg_size_pair=440_440 androidboot.secure_cpu=1 androidboot.rpmb_state=1 androidboot.pl_version=0x0005 androidboot.lk_version=0x0002 androidboot.tee_version=0x0107 androidboot.prod=1 androidboot.unlocked_kernel=true androidboot.pl_build_desc=cbd9508-20181011_014339 androidboot.lk_build_desc=435c19e-20180611_040355 lp855x_maxcurr=20

[    0.000000] <0>-(0)[0:swapper]log_buf_len individual max cpu contribution: 4096 bytes

[    0.000000] <0>-(0)[0:swapper]log_buf_len total cpu_extra contributions: 12288 bytes

[    0.000000] <0>-(0)[0:swapper]log_buf_len min size: 16384 bytes

[    0.000000] <0>-(0)[0:swapper]log_buf_len: 32768 bytes

[    0.000000] <0>-(0)[0:swapper]early log buf free: 13232(80%)

[    0.000000] <0>-(0)[0:swapper]PID hash table entries: 4096 (order: 3, 32768 bytes)

[    0.000000] <0>-(0)[0:swapper]Dentry cache hash table entries: 262144 (order: 9, 2097152 bytes)

[    0.000000] <0>-(0)[0:swapper]Inode-cache hash table entries: 131072 (order: 8, 1048576 bytes)

[    0.000000] <0>-(0)[0:swapper]Memory: 1856804K/1912568K available (9854K kernel code, 1006K rwdata, 4008K rodata, 464K init, 2499K bss, 55764K reserved)

[    0.000000] <0>-(0)[0:swapper]Virtual kernel memory layout:

[    0.000000] <0>    vmalloc : 0xffffff8000000000 - 0xffffffbdffff0000   (   247 GB)

[    0.000000] <0>    vmemmap : 0xffffffbe00000000 - 0xffffffbfc0000000   (     7 GB maximum)

[    0.000000] <0>              0xffffffbe00e00000 - 0xffffffbe02789200   (    25 MB actual)

[    0.000000] <0>    PCI I/O : 0xffffffbffa000000 - 0xffffffbffb000000   (    16 MB)

[    0.000000] <0>    fixed   : 0xffffffbffbdfe000 - 0xffffffbffbdff000   (     4 KB)

[    0.000000] <0>    modules : 0xffffffbffc000000 - 0xffffffc000000000   (    64 MB)

[    0.000000] <0>    memory  : 0xffffffc000000000 - 0xffffffc074bc0000   (  1867 MB)

[    0.000000] <0>      .init : 0xffffffc000e0b000 - 0xffffffc000e7f000   (   464 KB)

[    0.000000] <0>      .text : 0xffffffc000080000 - 0xffffffc000e0a964   ( 13867 KB)

[    0.000000] <0>      .data : 0xffffffc000e8b000 - 0xffffffc000f86a28   (  1007 KB)

[    0.000000] <0>-(0)[0:swapper][cpu_ntf] <00>ffffffc00018d4a0 (slab_cpuup_callback)

[    0.000000] <0>-(0)[0:swapper]SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1

[    0.000000] <0>-(0)[0:swapper/0][cpu_ntf] <00>ffffffc0000c9888 (sched_ilb_notifier)

[    0.000000] <0>-(0)[0:swapper/0]Preemptible hierarchical RCU implementation.

[    0.000000] <0>-(0)[0:swapper/0]	CONFIG_RCU_FANOUT set to non-default value of 32

[    0.000000] <0>-(0)[0:swapper/0][cpu_ntf] <00>ffffffc0000f26bc (rcu_cpu_notify)

[    0.000000] <0>-(0)[0:swapper/0][cpu_ntf] <00>ffffffc0002e8600 (radix_tree_callback)

[    0.000000] <0>-(0)[0:swapper/0]NR_IRQS:64 nr_irqs:64 0

[    0.000000] <0>-(0)[0:swapper/0][cpu_ntf] <00>ffffffc00030bc78 (gic_secondary_init)

[    0.000000] <0>-(0)[0:swapper/0][cpu_ntf] <00>ffffffc0000f817c (timer_cpu_notify)

[    0.000000] <0>-(0)[0:swapper/0][cpu_ntf] <00>ffffffc0000f9c30 (hrtimer_cpu_notify)

[    0.000000] <0>-(0)[0:swapper/0][cpu_ntf] <00>ffffffc000779158 (arch_timer_cpu_notify)

[    0.000000] <0>-(0)[0:swapper/0]Architected cp15 timer(s) running at 13.00MHz (phys).

[    0.000005] <0>-(0)[0:swapper/0]sched_clock: 56 bits at 13MHz, resolution 76ns, wraps every 2643056803840ns

[    0.000248] <0>-(0)[0:swapper/0]mt_gpt_init: tmr_regs=0xffffff800001e000, tmr_irq=4, freq=13000000

[    0.000257] <0>-(0)[0:swapper/0]gpt_devs_init: base_addr=0xffffff800001e010

[    0.000264] <0>-(0)[0:swapper/0]gpt_devs_init: base_addr=0xffffff800001e020

[    0.000270] <0>-(0)[0:swapper/0]gpt_devs_init: base_addr=0xffffff800001e030

[    0.000276] <0>-(0)[0:swapper/0]gpt_devs_init: base_addr=0xffffff800001e040

[    0.000282] <0>-(0)[0:swapper/0]gpt_devs_init: base_addr=0xffffff800001e050

[    0.000288] <0>-(0)[0:swapper/0]gpt_devs_init: base_addr=0xffffff800001e060

[    0.000309] <0>-(0)[0:swapper/0]setup_clksrc1: dev->base_addr=0xffffff800001e020 GPT2_CON=0x0

[    0.000313] <0>-(0)[0:swapper/0]sched_clock: 32 bits at 13MHz, resolution 76ns, wraps every 330382100403ns

[    0.000318] <0>-(0)[0:swapper/0]setup_clksrc1: mt_cyclecounter.mult=0x99d89d8a mt_cyclecounter.shift=0x19

[    0.000325] <0>-(0)[0:swapper/0]setup_clksrc2: dev->base_addr=0xffffff800001e020 GPT2_CON=0x31

[    0.000350] <0>-(0)[0:swapper/0]fwq sysc count

[    0.000619] <0>-(0)[0:swapper/0]mt_cpuxgpt_init: irq0=5, irq1=6, irq2=7, irq3=8, irq4=9, irq5=10

[    0.001083] <0>-(0)[0:swapper/0][cpu_ntf] <00>ffffffc00010dec4 (hotplug_cfd)

[    0.074890] <0>.(0)[0:swapper/0]console [ttyMT0] enabled

[    0.075565] <0>.(0)[0:swapper/0]ram_console: buffer start: 0xffffff800002e000, size: 0x80000

[    0.184703] <0>.(0)[0:swapper/0]console [ram-1] enabled

[    0.185358] Calibrating delay loop (skipped), value calculated using timer frequency.. 26.00 BogoMIPS (lpj=130000)

[    0.186638] <0>.(0)[0:swapper/0]pid_max: default: 32768 minimum: 301

[    0.187498] <0>.(0)[0:swapper/0][cpu_ntf] <00>ffffffc0001c9058 (buffer_cpu_notify)

[    0.188435] <0>.(0)[0:swapper/0]Security Framework initialized

[    0.189190] <0>.(0)[0:swapper/0]SELinux:  Initializing.

[    0.189906] <0>.(0)[0:swapper/0]Mount-cache hash table entries: 4096 (order: 3, 32768 bytes)

[    0.190951] <0>.(0)[0:swapper/0]Mountpoint-cache hash table entries: 4096 (order: 3, 32768 bytes)

[    0.192309] <0>.(0)[0:swapper/0][cpu_ntf] <00>ffffffc000156084 (ratelimit_handler)

[    0.193468] <0>.(0)[0:swapper/0][cpu_ntf] <00>ffffffc000098d58 (smpboot_thread_call)

[    0.194604] <0>.(0)[1:swapper/0]CPU0: update cpu_capacity 538

[    0.195589] <0>.(0)[1:swapper/0]EFI services will not be available.

[    0.196370] <0>.(0)[1:swapper/0][cpu_ntf] <00>ffffffc00009cb58 (cpu_callback)

[    0.209246] <0>.(0)[1:swapper/0][cpu_ntf] <00>ffffffc0000b2a38 (workqueue_cpu_up_callback)

[    0.210270] <0>.(0)[1:swapper/0][cpu_ntf] <00>ffffffc0000b2d58 (workqueue_cpu_down_callback)

[    0.211632] <0>.(0)[1:swapper/0][cpu_ntf] <00>ffffffc0000c419c (migration_call)

[    0.212539] <0>.(0)[1:swapper/0][cpu_ntf] <00>ffffffc0000beccc (sched_cpu_active)

[    0.213470] <0>.(0)[1:swapper/0][cpu_ntf] <00>ffffffc0000c2074 (sched_cpu_inactive)

[    0.229281] <0>.(0)[1:swapper/0]

[    0.229281] <0>**********************************************************

[    0.230522] <0>.(0)[1:swapper/0]**   NOTICE NOTICE NOTICE NOTICE NOTICE NOTICE NOTICE   **

[    0.231552] <0>.(0)[1:swapper/0]**                                                      **

[    0.232583] <0>.(0)[1:swapper/0]** trace_printk() being used. Allocating extra memory.  **

[    0.233613] <0>.(0)[1:swapper/0]**                                                      **

[    0.234643] <0>.(0)[1:swapper/0]** This means that this is a DEBUG kernel and it is     **

[    0.235674] <0>.(0)[1:swapper/0]** unsafe for produciton use.                           **

[    0.236704] <0>.(0)[1:swapper/0]**                                                      **

[    0.237735] <0>.(0)[1:swapper/0]** If you see this message and you are not debugging    **

[    0.238765] <0>.(0)[1:swapper/0]** the kernel, report this immediately to your vendor!  **

[    0.239806] <0>.(0)[1:swapper/0]**                                                      **

[    0.240827] <0>.(0)[1:swapper/0]**   NOTICE NOTICE NOTICE NOTICE NOTICE NOTICE NOTICE   **

[    0.241857] <0>.(0)[1:swapper/0]**********************************************************

[    0.244775] <0>.(0)[1:swapper/0]init_get_max_DRAM_size done. phone_dram_sz: 0x0, kernel_mem_sz: 0x76bc0000

[    0.283498] <2>.(2)[1:swapper/0]Brought up 4 CPUs

[    0.284079] <2>.(2)[1:swapper/0]SMP: Total of 4 processors activated (104.00 BogoMIPS).

[    0.285102] <0>-(0)[10:migration/0][name:alternative&]alternatives: patching kernel code

[    0.286339] <2>.(2)[1:swapper/0][cpu_ntf] <00>ffffffc0000bafb0 (sched_domains_numa_masks_update)

[    0.287430] <2>.(2)[1:swapper/0][cpu_ntf] <00>ffffffc0000c5944 (cpuset_cpu_active)

[    0.288371] <2>.(2)[1:swapper/0][cpu_ntf] <00>ffffffc0000c59b4 (cpuset_cpu_inactive)

[    0.289736] <0>.(0)[1:swapper/0][cpu_ntf] <00>ffffffc00034f8d0 (device_hotplug_notifier)

[    0.291780] <0>.(0)[1:swapper/0]

[    0.291780] <0> register_restart_handler- 0xffffffc0011b8428, Notify call: - 0xffffffc000722c5c

[    0.293261] <0>.(0)[1:swapper/0]ARCH_RESET register mtk_restart_handler  ok!!!!

[    0.295667] <2>.(2)[1:swapper/0]pinctrl core: initialized pinctrl subsystem

[    0.296820] <2>.(2)[1:swapper/0]regulator-dummy: no parameters

[    0.298280] <2>.(2)[1:swapper/0][CHIP] 0x8172 0x8A00 0xCB00 0x0003 (0186)

[    0.299121] <2>.(2)[1:swapper/0][CHIP] CODE = 8172 8a00 cb00 0101, CB00 0003

[    0.299996] [CHIP] CODE = 0001003C ffffffc000404474

[    0.312176] <2>.(2)[1:swapper/0][SPM] spm_base = ffffff80000b6000, spm_irq_0 = 21, spm_irq_1 = 22, spm_irq_2 = 23, spm_irq_3 = 24

[    0.313644] <2>.(2)[1:swapper/0][SPM] spm_irq_4 = 25, spm_irq_5 = 26, spm_mcucfg = ffffff80000b8000

[    0.315036] <2>.(2)[1:swapper/0]mcucfg_base: 0xffffff80000ba000

[    0.316040] <2>.(2)[1:swapper/0]pwrap_hal_init

[    0.352234] <2>.(2)[1:swapper/0]cpuidle: using governor ladder

[    0.392247] <2>.(2)[1:swapper/0]cpuidle: using governor menu

[    0.432265] <0>.(0)[1:swapper/0]cpuidle: using governor mtk_governor

[    0.433590] <0>.(0)[1:swapper/0]vdso: 2 pages (1 code @ ffffffc000e92000, 1 data @ ffffffc000e91000)

[    0.435491] <0>.(0)[1:swapper/0]software IO TLB [mem 0xb2000000-0xb2400000] (4MB) mapped at [ffffffc072000000-ffffffc0723fffff]

[    0.437034] <0>.(0)[1:swapper/0]DMA: preallocated 256 KiB pool for atomic allocations

[    0.438008] <0>.(0)[1:swapper/0][SPM] PWAKE_EN:1, PCMWDT_EN:1, BYPASS_SYSPWREQ:0

[    0.438923] <0>.(0)[1:swapper/0][SLP] SLEEP_DPIDLE_EN:1, REPLACE_DEF_WAKESRC:0, SUSPEND_LOG_EN:1

[    0.441187] <0>.(0)[1:swapper/0]### CIRQ init done. ###

[    0.441956] <0>.(0)[1:swapper/0][DRAMC]get CQDMA_BASE_ADDR @ ffffff8000134c00

[    0.442864] <0>.(0)[1:swapper/0][DRAMC]get DRAMCAO_BASE_ADDR @ ffffff8000138000

[    0.443818] <0>.(0)[1:swapper/0][DRAMC]get DDRPHY_BASE_ADDR @ ffffff800013a000

[    0.444767] <0>.(0)[1:swapper/0][DRAMC]get DRAMCNAO_BASE_ADDR @ ffffff800013c000

[    0.445695] <0>.(0)[1:swapper/0][DRAMC]get vcore_dvfs-reserve-memory @ ffffff8000140000

[    0.446730] <0>.(0)[1:swapper/0][DRAMC Driver] Store Vcore DVFS settings...

[    0.447611] <0>.(0)[1:swapper/0]get EMI_DVFS_SRAM_ADDR @ ffffff800013eb00

[    0.448449] <0>.(0)[1:swapper/0][vcore dvfs][kernel]low_freq_pll_setting_addr = 0xffffff800013ee40, value[0] = 0xd3040300

[    0.449815] <0>.(0)[1:swapper/0][vcore dvfs][kernel]low_freq_cha_setting_addr = 0xffffff800013eb00, value[0] = 0xaafd478c

[    0.451206] <0>.(0)[1:swapper/0][vcore dvfs][kernel]low_freq_chb_setting_addr = 0xffffff800013ebd0, value[0] = 0xaafd478c

[    0.452564] <0>.(0)[1:swapper/0][vcore dvfs][kernel]high_freq_pll_setting_addr = 0xffffff800013eec0, value[0] = 0xa3060700

[    0.453942] <0>.(0)[1:swapper/0][vcore dvfs][kernel]high_freq_cha_setting_addr = 0xffffff800013eca0, value[0] = 0xaafd478c

[    0.455319] <0>.(0)[1:swapper/0][vcore dvfs][kernel]high_freq_chb_setting_addr = 0xffffff800013ed70, value[0] = 0xaafd478c

[    0.456696] <0>.(0)[1:swapper/0][vcore dvfs][kernel]pll_setting_num = 1e

[    0.457530] <0>.(0)[1:swapper/0][vcore dvfs][kernel]freq_setting_num = 33

[    0.458378] <0>.(0)[1:swapper/0][vcore dvfs]pll_high_addr = 0xffffff800013eec0, pll_low_addr = 0xffffff800013ee40, num = 30

[    0.459765] <0>.(0)[1:swapper/0][DRAMC Driver] Register MD32 Vcore DVFS Handler...

[    0.460710] mpll_probe is not ready

[    0.461122] <0>.(0)[1:swapper/0][DRAMC Driver] Dram Data Rate = 0

[    0.464469] <2>.(2)[1:swapper/0]irq: no irq domain found for /soc/pinctrl@10005000 !

[    0.475469] <2>.(2)[1:swapper/0]irq: no irq domain found for /soc/pinctrl@10005000 !

[    0.481011] <2>.(2)[1:swapper/0]irq: no irq domain found for /soc/pinctrl@10005000 !

[    0.484391] <2>.(2)[1:swapper/0][DAPC] [TEE] dapc_register_ext_handler is called by Type_2B slave(0)

[    0.485859] <3>.(3)[1:swapper/0][TZ_M4U]sec_pt_va=0x0x10f04000, pa=0xb7304000, align=0x4000

[    0.486905] <3>.(3)[1:swapper/0][TZ_M4U]init done.(secva0x10debe80-0x10debe80 pa0xb71ebe80 sz142M)

[    0.488025] <3>.(3)[1:swapper/0][DAPC] [TEE] dapc_register_ext_handler is called by Type_2B slave(3)

[    0.489164] <3>.(3)[1:swapper/0][DAPC] [TEE] dapc_register_ext_handler is called by Type_2B slave(2)

[    0.490304] <3>.(3)[1:swapper/0][DAPC] [TEE] dapc_register_ext_handler is called by Type_2B slave(6)

[    0.491570] <3>.(3)[1:swapper/0][CMDQ_TZ][MSG]-->init: core

[    0.492272] <3>.(3)[1:swapper/0][CMDQ_TZ][MSG]-->init: core done

[    0.493066] <3>.(3)[1:swapper/0][CMDQ_TZ][LOG]MTEE_RequestIrq CMDQ_SECURE_IRQ success[168]

[    0.494123] <3>.(3)[1:swapper/0]MTEE_Widevine[E]: create_map alloc:16

[    0.495378] <3>.(3)[1:swapper/0]irq: no irq domain found for /soc/pwrap@1000d000/mt6397 !

[    0.496786] <3>.(3)[1:swapper/0]irq: no irq domain found for /soc/pinctrl@10005000 !

[    0.497990] <3>.(3)[1:swapper/0]irq: no irq domain found for /soc/pinctrl@10005000 !

[    0.544777] <2>.(2)[1:swapper/0][cpu_ntf] <00>ffffffc0002cbf60 (blk_cpu_notify)

[    0.545692] <2>.(2)[1:swapper/0][cpu_ntf] <00>ffffffc0002cc794 (blk_iopoll_cpu_notify)

[    0.546678] <2>.(2)[1:swapper/0][cpu_ntf] <00>ffffffc0002d2858 (blk_mq_main_cpu_notify)

[    0.547672] <2>.(2)[1:swapper/0][cpu_ntf] <00>ffffffc0002cfcf4 (blk_mq_queue_reinit_notify)

[    0.549057] <2>.(2)[1:swapper/0]platform 10006000.scpsys: Driver mtk-scpsys requests probe deferral

[    0.550492] <2>.(2)[1:swapper/0][CMDQ][MSG]CMDQ driver init begin

[    0.551245] <2>.(2)[1:swapper/0][CMDQ][MSG]Register 1 group engines' callback

[    0.552137] <2>.(2)[1:swapper/0][CMDQ][MSG]clockOn:  0xcmdqMdpClockOn, dumpInfo: 0xcmdqMdpDumpInfo

[    0.553270] <2>.(2)[1:swapper/0][CMDQ][MSG]resetEng: 0xcmdqMdpResetEng, clockOff: 0xcmdqMdpClockOff

[    0.554389] <2>.(2)[1:swapper/0][CMDQ][MSG]Register 4 group engines' callback

[    0.555280] <2>.(2)[1:swapper/0][CMDQ][MSG]clockOn:  0x          (null), dumpInfo: 0xcmdqVEncDumpInfo

[    0.556429] <2>.(2)[1:swapper/0][CMDQ][MSG]resetEng: 0x          (null), clockOff: 0x          (null)

[    0.557661] <2>.(2)[1:swapper/0][CMDQ][MSG]CMDQ driver probe begin

[    0.558475] <2>.(2)[1:swapper/0][CMDQ][LOG][CMDQ] platform_dev: dev: ffffffc0203cbc10, PA: 10212000, VA: ffffff8000148000, irqId: 37,  irqSecId:38

[    0.560206] <2>.(2)[1:swapper/0][CMDQ][LOG]DEV: VA(mediatek,mt8173-mmsys): 0xffffff800014a000

[    0.561344] <2>.(2)[1:swapper/0][CMDQ][LOG]DEV: VA(mediatek,mt8173-MDP_RDMA0): 0xffffff800014c000

[    0.562524] <2>.(2)[1:swapper/0][CMDQ][LOG]DEV: VA(mediatek,mt8173-MDP_RDMA1): 0xffffff800014e000

[    0.563711] <2>.(2)[1:swapper/0][CMDQ][LOG]DEV: VA(mediatek,mt8173-MDP_RSZ0): 0xffffff8000150000

[    0.564878] <2>.(2)[1:swapper/0][CMDQ][LOG]DEV: VA(mediatek,mt8173-MDP_RSZ1): 0xffffff8000152000

[    0.566046] <2>.(2)[1:swapper/0][CMDQ][LOG]DEV: VA(mediatek,mt8173-MDP_RSZ2): 0xffffff8000154000

[    0.567214] <2>.(2)[1:swapper/0][CMDQ][LOG]DEV: VA(mediatek,mt8173-MDP_WDMA): 0xffffff8000156000

[    0.568382] <2>.(2)[1:swapper/0][CMDQ][LOG]DEV: VA(mediatek,mt8173-MDP_WROT0): 0xffffff8000158000

[    0.569566] <2>.(2)[1:swapper/0][CMDQ][LOG]DEV: VA(mediatek,mt8173-MDP_WROT1): 0xffffff800015a000

[    0.570746] <2>.(2)[1:swapper/0][CMDQ][LOG]DEV: VA(mediatek,mt8173-MDP_TDSHP0): 0xffffff800015c000

[    0.571937] <2>.(2)[1:swapper/0][CMDQ][LOG]DEV: VA(mediatek,mt8173-MDP_TDSHP1): 0xffffff800015e000

[    0.573063] <2>.(2)[1:swapper/0][CMDQ][DBG]set logLevel to 1

[    0.574593] <3>.(3)[1:swapper/0][CMDQ][LOG]register IRQ:37

[    0.576291] <3>.(3)[1:swapper/0]mtk_mfg_2d_probe

[    0.576861] <3>.(3)[1:swapper/0]mfg-2d soc:mfgsys-2d: Failed to get dev->pm_domain

[    0.577812] <3>.(3)[1:swapper/0]platform soc:mfgsys-2d: Driver mfg-2d requests probe deferral

[    0.579126] <3>.(3)[1:swapper/0]mtk_mfg_async_probe0516

[    0.579770] <3>.(3)[1:swapper/0]mfg-async soc:mfgsys-async: Failed to get dev->pm_domain

[    0.580785] <3>.(3)[1:swapper/0]platform soc:mfgsys-async: Driver mfg-async requests probe deferral

[    0.582514] <3>.(3)[1:swapper/0][CONN-MD-DFT][I]conn_md_init:init message queue list succeed

[    0.583559] <3>.(3)[1:swapper/0][CONN-MD-DFT][I]conn_md_init:init active queue list succeed

[    0.584614] <3>.(3)[1:swapper/0][CONN-MD-DFT][I]conn_md_init:init user information list succeed

[    0.585703] <3>.(3)[1:swapper/0][CONN_MD_DMP][I]conn_md_dmp_init:alloc memory for msg log system done, size:0x00000430

[    0.587030] <3>.(3)[1:swapper/0][CONN-MD-DFT][I]conn_md_init:conn_md_dmp_init succeed

[    0.588069] <3>.(3)[1:swapper/0][CONN-MD-DFT][I]conn_md_init:create conn_md_thread succeed, wakeup it

[    0.589483] <3>.(3)[1:swapper/0]SCSI subsystem initialized

[    0.590361] <3>.(3)[1:swapper/0]usbcore: registered new interface driver usbfs

[    0.591292] <3>.(3)[1:swapper/0]usbcore: registered new interface driver hub

[    0.592248] <2>.(2)[1:swapper/0]usbcore: registered new device driver usb

[    0.593467] <2>.(2)[1:swapper/0]media: Linux media interface: v0.10

[    0.594319] <2>.(2)[1:swapper/0]Linux video capture interface: v2.00

[    0.595312] <2>.(2)[1:swapper/0]Advanced Linux Sound Architecture Driver Initialized.

[    0.596650] <2>.(2)[1:swapper/0][cpu_ntf] <00>ffffffc00087dd8c (dev_cpu_callback)

[    0.597863] <2>.(2)[20:kworker/2:0]cfg80211: Calling CRDA to update world regulatory domain

[    0.599471] <2>.(2)[1:swapper/0]Switched to clocksource arch_sys_counter

[    0.622802] <2>.(2)[1:swapper/0][ION]ion_init()

[    0.623589] <2>.(2)[1:swapper/0][ION]ion_drv_probe() heap_nr=2

[    0.624430] <2>.(2)[1:swapper/0][ION]ion_drv_create_heap: create heap: ion_mm_heap

[    0.625373] <2>.(2)[1:swapper/0]MMP: MMProfileEnable(): enable: 1

[    0.626142] <2>.(2)[1:swapper/0]MMP: MMProfileForceStart(): start: 1

[    0.633256] <2>.(2)[1:swapper/0]TCP established hash table entries: 16384 (order: 5, 131072 bytes)

[    0.634492] <2>.(2)[1:swapper/0]TCP bind hash table entries: 16384 (order: 6, 262144 bytes)

[    0.635776] <2>.(2)[1:swapper/0]TCP: Hash tables configured (established 16384 bind 16384)

[    0.636850] <2>.(2)[1:swapper/0]TCP: reno registered

[    0.637462] <2>.(2)[1:swapper/0]UDP hash table entries: 1024 (order: 3, 32768 bytes)

[    0.638473] <2>.(2)[1:swapper/0]UDP-Lite hash table entries: 1024 (order: 3, 32768 bytes)

[    0.639870] <2>.(2)[1:swapper/0]Unpacking initramfs...

[    0.717699] <3>.(3)[1:swapper/0]Freeing initrd memory: 1652K (ffffffc003480000 - ffffffc00361d000)

[    0.721155] <2>.(2)[1:swapper/0]futex hash table entries: 1024 (order: 4, 65536 bytes)

[    0.722188] <2>.(2)[1:swapper/0]audit: initializing netlink subsys (disabled)

[    0.723114] <2>.(2)[1:swapper/0]audit: type=2000 audit(0.700:1): initialized

[    0.724160] <2>.(2)[1:swapper/0][cpu_ntf] <00>ffffffc00015b078 (cpu_callback)

[    0.731288] <2>.(2)[1:swapper/0]squashfs: version 4.0 (2009/01/31) Phillip Lougher

[    0.732508] <2>.(2)[1:swapper/0]fuse init (API version 7.23)

[    0.734779] <3>.(3)[1:swapper/0]io scheduler noop registered

[    0.735483] <3>.(3)[1:swapper/0]io scheduler deadline registered

[    0.736420] <3>.(3)[1:swapper/0]io scheduler cfq registered (default)

[    0.737240] <3>.(3)[1:swapper/0][cpu_ntf] <00>ffffffc000307d84 (percpu_counter_hotcpu_callback)

[    0.738445] <3>.(3)[1:swapper/0]mtk_pctrl_init++++++

[    0.740291] <3>.(3)[1:swapper/0]mtk_pctrl_init------ ok

[    0.743397] <3>.(3)[1:swapper/0]Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled

[    0.747490] <3>.(3)[1:swapper/0]loop: module loaded

[    0.748438] <3>.(3)[1:swapper/0]zram: Created 1 device(s) ...

[    0.749522] <3>.(3)[1:swapper/0]platform mtgpufreq: Driver mt-gpufreq requests probe deferral

[    0.750639] <3>.(3)[1:swapper/0][GPU_DVFS] mediatek,mt8173-topckgen base: 0xffffff8000d94000

[    0.751752] <3>.(3)[1:swapper/0][GPU_DVFS] mediatek,mt8173-apmixedsys base: 0xffffff8000d96000

[    0.752863] <3>.(3)[1:swapper/0][GPU_DVFS] mediatek,mt8173-scpsys base: 0xffffff8000d98000

[    0.754353] <3>.(3)[1:swapper/0][HPS] hps_init

[    0.754897] <3>.(3)[1:swapper/0][HPS] hps_cpu_init

[    0.755496] <3>.(3)[1:swapper/0][HPS] hps_ctxt.little_cpumask: 0-1

[    0.756264] <3>.(3)[1:swapper/0][HPS] hps_ctxt.big_cpumask: 2-3

[    0.757005] <3>.(3)[1:swapper/0][HPS] hps_cpu_init: little_cpu_id_min: 0, little_cpu_id_max: 1, big_cpu_id_min: 2, big_cpu_id_max: 3

[    0.758488] <3>.(3)[1:swapper/0][HPS] hps_core_init

[    0.759177] <3>.(3)[1:swapper/0][HPS] hps_task_start success, ptr: ffffffc070e69700, pid: 68

[    0.759193] <3>.(1)[68:hps_main][HPS] hps_ctxt.init_state: 0

[    0.759197] <3>.(1)[68:hps_main][HPS] hps_ctxt.state: 0

[    0.759200] <3>.(1)[68:hps_main][HPS] hps_ctxt.enabled: 1

[    0.759204] <3>.(1)[68:hps_main][HPS] hps_ctxt.early_suspend_enabled: 1

[    0.759207] <3>.(1)[68:hps_main][HPS] hps_ctxt.suspend_enabled: 1

[    0.759211] <3>.(1)[68:hps_main][HPS] hps_ctxt.is_hmp: 1

[    0.759214] <3>.(1)[68:hps_main][HPS] hps_ctxt.little_cpu_id_min: 0

[    0.759217] <3>.(1)[68:hps_main][HPS] hps_ctxt.little_cpu_id_max: 1

[    0.759221] <3>.(1)[68:hps_main][HPS] hps_ctxt.big_cpu_id_min: 2

[    0.759224] <3>.(1)[68:hps_main][HPS] hps_ctxt.big_cpu_id_max: 3

[    0.767576] <3>.(3)[1:swapper/0][HPS] hps_procfs_init

[    0.768869] <3>.(3)[1:swapper/0]GPT: init

[    0.769898] <3>.(3)[1:swapper/0]11002000.uart0: ttyMT0 at MMIO 0x0 (irq = 11, base_baud = 1625000) is a MTK UART

[    0.771328] <3>.(3)[1:swapper/0][UART 0] create

[    0.771883] <3>.(3)[1:swapper/0][UART 0] idx= 0

[    0.772454] <3>.(3)[1:swapper/0][ 0] ffffff80000d6000 (1024) ;

[    0.773173] <3>.(3)[1:swapper/0][UART 0] idx= 1

[    0.773745] <3>.(3)[1:swapper/0][ 1] ffffff80000d7000 (1024) ;

[    0.774463] <3>.(3)[1:swapper/0]

[    0.775124] <3>.(3)[1:swapper/0]11004000.uart2: ttyMT2 at MMIO 0x0 (irq = 17, base_baud = 1625000) is a MTK UART

[    0.776539] <3>.(3)[1:swapper/0][UART 2] create

[    0.777094] <3>.(3)[1:swapper/0][UART 2] idx= 4

[    0.777678] <3>.(3)[1:swapper/0][ 4] ffffff80000d8000 (8192) ;

[    0.778395] <3>.(3)[1:swapper/0][UART 2] idx= 5

[    0.778973] <3>.(3)[1:swapper/0][ 5] ffffff80000da000 (8192) ;

[    0.779701] <3>.(3)[1:swapper/0]

[    0.780136] <3>.(3)[1:swapper/0]11005000.uart3: ttyMT3 at MMIO 0x0 (irq = 20, base_baud = 1625000) is a MTK UART

[    0.781546] <3>.(3)[1:swapper/0][UART 3] not support VFF, Cancel alloc

[    0.783184] <3>.(3)[1:swapper/0][cpu_ntf] <00>ffffffc00039c998 (restart_trace)

[    0.785183] <3>.(3)[1:swapper/0][MT AUXADC_probe3] get device tree info : start !!

[    0.786229] <3>.(3)[1:swapper/0][MT AUXADC_AP] adc_channel_info_init : done !!

[    0.787151] <3>.(3)[1:swapper/0]proc_create auxadc_debug_proc_fops

[    0.788578] <3>.(3)[1:swapper/0][M4U]4G DRAM Mode is: 0 maxpfn 0xb4bc0

[    0.789547] <2>.(2)[1:swapper/0][M4U]create session: 0x7

[    0.790215] <2>.(2)[1:swapper/0][TZ_M4U]m4u session init second

[    0.791095] <2>.(2)[1:swapper/0][TZ_M4U]Dynamic MAP. VA: 0x4000000 size 0x8000000 mva offset 0x9000000

[    0.792260] <2>.(2)[1:swapper/0][TZ_M4U]tee mem: (secva0x10debe80-0x10debe80 pa0xb71ebe80 sz142M),4gb 0

[    0.793433] <2>.(2)[1:swapper/0][TZ_M4U]init NonsecPa b0fb0000 Va 0x0x20000000 Ret 0x0==0

[    0.794465] <2>.(2)[1:swapper/0][M4U]reserve sec  sz 0x21000000 mva 0x100000

[    0.795418] <2>.(2)[1:swapper/0][M4U]4G DRAM Mode is: 0 maxpfn 0xb4bc0

[    0.796635] <2>.(2)[1:swapper/0]MMP: MMProfileEnable(): enable: 1

[    0.797397] <2>.(2)[1:swapper/0]MMP: MMProfileForceStart(): start: 1

[    0.798340] <2>.(2)[1:swapper/0][PWM] get PWM1-main clock, ffffffc02002f9c0

[    0.799207] <2>.(2)[1:swapper/0][PWM] get PWM2-main clock, ffffffc02002fa80

[    0.800101] <2>.(2)[1:swapper/0][PWM] get PWM3-main clock, ffffffc02002fb40

[    0.800969] <2>.(2)[1:swapper/0][PWM] get PWM4-main clock, ffffffc02002fc00

[    0.801839] <2>.(2)[1:swapper/0][PWM] get PWM5-main clock, ffffffc02002fcc0

[    0.802709] <2>.(2)[1:swapper/0][PWM] get PWM6-main clock, ffffffc02002fd80

[    0.803580] <2>.(2)[1:swapper/0][PWM] get PWM7-main clock, ffffffc02002fe40

[    0.804443] <2>.(2)[1:swapper/0][PWM] get PWM-main clock, ffffffc02002ff00

[    0.805537] <2>.(2)[1:swapper/0][ALS/PS] stk3x1x_init

[    0.806271] <2>.(2)[1:swapper/0][ALS/PS] stk3x1x_init: i2c_number=4

[    0.807043] <2>.(2)[1:swapper/0]<ALS/PS> alsps_driver_add

[    0.807715] <2>.(2)[1:swapper/0]<ALS/PS> register alsps driver for the first time

[    0.808873] <2>.(2)[1:swapper/0]<ALS/PS> als_ps_probe

[    0.809570] <2>.(2)[1:swapper/0][ALS/PS] ltr559_init

[    0.810284] <2>.(2)[1:swapper/0]<ALS/PS> alsps_driver_add

[    0.810950] <2>.(2)[1:swapper/0][Gsensor] bma253_init

[    0.811674] <2>.(2)[1:swapper/0][Gsensor] bma253_init: i2c_number=2

[    0.812738] <2>.(2)[1:swapper/0][Accdet]accdet_mod_init begin!

[    0.814192] <2>.(2)[1:swapper/0]input: ACCDET as /devices/virtual/input/input0

[    0.816246] <3>.(3)[1:swapper/0][Accdet]accdet set EINT finished, accdet_irq=113, headsetdebounce=0

[    1.019610] <3>.(3)[1:swapper/0][Accdet]platform_driver_register done!

[    1.020415] <3>.(3)[1:swapper/0][Accdet]accdet_mod_init done!

[    1.022527] mtk_rtc_common: rtc_init

[    1.024107] <3>.(3)[1:swapper/0]mtk_rtc_common: read al time = 1970/01/01 00:00:00 (0)

[    1.026006] <3>.(3)[1:swapper/0]mt-rtc mt-rtc: rtc core: registered mt-rtc as rtc0

[    1.027413] <3>.(3)[1:swapper/0][MU3D]mu3d_parse_dts: use device tree

[    1.028231] <3>.(3)[1:swapper/0][MU3D]eint number - 116

[    1.028874] <3>.(3)[1:swapper/0][MU3D]drv_mode:3, str_mode:0, num_eps:9, ports:1

[    1.029818] <3>.(3)[1:swapper/0][MU3D]otg-mode:1, init_to_host:0, u3_otg:0, wakeup_src:0

[    1.030820] <3>.(3)[1:swapper/0][MU3D]eint:116, p0_vbus:1, p0_gpio:-1, p1_vbus:0, p1_gpio:-1

[    1.031919] <3>.(3)[1:swapper/0][MU3D]fail to get vusb33

[    1.032571] <3>.(3)[1:swapper/0][MU3D]fail to get regulators

[    1.033276] <3>.(3)[1:swapper/0][MU3D]fail to get mu3d resources

[    1.034058] <3>.(3)[1:swapper/0]platform 11270000.usb: Driver musb-mtu3d requests probe deferral

[    1.035309] <3>.(3)[1:swapper/0][BOOT_COMMON] [create_sysfs] No atag,meta found !

[    1.036431] <3>.(3)[1:swapper/0][LCM-NT51021-WUXGA-DSI-VDO] nt51021_iic_init (line:576) :nt51021_iic_init

[    1.037856] <3>.(3)[1:swapper/0]platform 14022000.smi: Driver mtk-smi requests probe deferral

[    1.039223] <3>.(3)[1:swapper/0]platform 14021000.larb: Driver mtk-smi-larb requests probe deferral

[    1.040399] <3>.(3)[1:swapper/0]platform 14027000.larb: Driver mtk-smi-larb requests probe deferral

[    1.041568] <3>.(3)[1:swapper/0]platform 15001000.larb: Driver mtk-smi-larb requests probe deferral

[    1.042728] <3>.(3)[1:swapper/0]platform 16010000.larb: Driver mtk-smi-larb requests probe deferral

[    1.043885] <3>.(3)[1:swapper/0]platform 18001000.larb: Driver mtk-smi-larb requests probe deferral

[    1.045044] <3>.(3)[1:swapper/0]platform 19001000.larb: Driver mtk-smi-larb requests probe deferral

[    1.046336] <3>.(3)[1:swapper/0][DISP][primary_display_get_width #4845]ERROR:lcm handle is null

[    1.047414] <3>.(3)[1:swapper/0][DISP][primary_display_get_height #4864]ERROR:lcm handle is null

[    1.048508] <3>.(3)[1:swapper/0][pid=1]smi_init done

[    1.049130] <3>.(3)[1:swapper/0][MTKFB]frame buffer driver init

[    1.050035] <3>.(3)[1:swapper/0][DISP]func|mtkfb_probe

[    1.050666] <3>.(3)[1:swapper/0][MTKFB]mtkfb_probe start

[    1.051419] <3>.(3)[1:swapper/0][MTKFB]mtkfb_probe is earlier than SMI

[    1.052231] <3>.(3)[1:swapper/0]platform soc:MTKFB@bf200000: Driver mtkfb requests probe deferral

[    1.053450] <3>.(3)[1:swapper/0][MTKFB]frame buffer driver init -- leave

[    1.054559] <3>.(3)[1:swapper/0][DISP]create ion client 0xffffffc070e84cc0

[    1.055516] <2>.(2)[74:disp_switch_mod][DISP]disp_switch_mode_kthread in!

[    1.055519] <2>.(3)[1:swapper/0][DISP]Register the disp driver

[    1.057365] <3>.(3)[1:swapper/0][DDR INFO]module init

[    1.058069] <3>.(3)[1:swapper/0][DDR INFO]DDRPHY0 ADDRESS ffffff8000e16000

[    1.058940] <3>.(3)[1:swapper/0][DDR INFO]DRAMC0 ADDRESS ffffff8000e3c000,

[    1.059868] <3>.(3)[1:swapper/0][DDR INFO]DRAMC0_NAO ADDRESS ffffff8000e3e000,

[    1.060815] <3>.(3)[1:swapper/0][DDR INFO]DDRPHY1 ADDRESS ffffff8000e5a000

[    1.061716] <3>.(3)[1:swapper/0][DDR INFO]DRAMC1 ADDRESS ffffff8000e5c000,

[    1.062622] <3>.(3)[1:swapper/0][DDR INFO]DRAMC1_NA1 ADDRESS ffffff8000e5e000,

[    1.063571] <3>.(3)[1:swapper/0][DDR INFO]CCIF0 ADDRESS ffffff8000e72000,

[    1.064463] <3>.(3)[1:swapper/0][DDR INFO]EMI ADDRESS ffffff8000e74000,

[    1.067081] <3>.(3)[1:swapper/0][kd_sensorlist][CAMERA_HW_i2C_init]MTKCAM I2C Bus #3 , #6

[    1.068096] <3>.(3)[1:swapper/0][kd_sensorlist][CAMERA_HW_i2C_init]+++

[    1.069107] <3>.(3)[1:swapper/0]image_sensor 15008000.camera1: could not find pctldev for node /soc/pwrap@1000d000/mt6397/pinctrl@c000/cam1@1, deferring probe

[    1.070895] <3>.(3)[1:swapper/0]platform 15008000.camera1: Driver image_sensor requests probe deferral

[    1.072298] <3>.(3)[1:swapper/0]image_sensor_bus2 15008000.camera2: could not find pctldev for node /soc/pwrap@1000d000/mt6397/pinctrl@c000/cam2@1, deferring probe

[    1.074121] <3>.(3)[1:swapper/0]platform 15008000.camera2: Driver image_sensor_bus2 requests probe deferral

[    1.075421] <3>.(3)[1:swapper/0][kd_sensorlist][CAMERA_HW_i2C_init]---

[    1.076540] <3>.(3)[1:swapper/0]km input MET_BM__Init...

[    1.077247] <3>.(3)[1:swapper/0]km MET_BM_Init node =ffffffc074b89b98

[    1.078053] <3>.(3)[1:swapper/0]km MET_BM_Init BaseAddrEMI =ffffff8000e92000

[    1.078933] <3>.(3)[1:swapper/0]MET EMI: of_iomap <mediatek,EMI> to ffffff8000e92000

[    1.079968] <3>.(3)[1:swapper/0]MET EMI: of_iomap <mediatek,DRAMC0_NAO> to ffffff8000e94000

[    1.081058] <3>.(3)[1:swapper/0]MET EMI: of_iomap <mediatek,DRAMC1_NAO> to ffffff8000e96000

[    1.082181] <3>.(3)[1:swapper/0]Can't find mt_get_emi_freq()

[    1.083160] <3>.(3)[1:swapper/0][WMT-DETECT][I]wmt_detect_driver_init:driver(major 154) installed success

[    1.084370] <3>.(3)[1:swapper/0][SDIO-DETECT][I]sdio_detect_init:sdio_register_driver() ret=0

[    1.085844] <3>.(3)[1:swapper/0]mediatek,connectivity-combo mediatek,connectivity-combo: could not find pctldev for node /soc/pwrap@1000d000/mt6397/pinctrl@c000/cfg_gpio17_mode1_pull_dis, deferring probe

[    1.088116] <3>.(3)[1:swapper/0]platform mediatek,connectivity-combo: Driver mediatek,connectivity-combo requests probe deferral

[    1.090326] <3>.(3)[1:swapper/0][LAST PC] CORE_0 PC = 0x0( + 0x0), FP = 0x0, SP = 0x0

[    1.090326] <3>[LAST PC] CORE_1 PC = 0x0( + 0x0), FP = 0x0, SP = 0x0

[    1.090326] <3>[LAST PC] CORE_2 PC = 0x800530182378c874 ( + 0x0)

[    1.090326] <3>[LAST PC] CORE_3 PC = 0x98482470036d50 ( + 0x0)

[    1.093652] <3>.(3)[1:swapper/0]systracker probe

[    1.094227] <3>.(3)[1:swapper/0]of_iomap for systracker @ 0xffffff8000e9a000

[    1.095118] <3>.(3)[1:swapper/0]systracker_platform_probe_default:95: irq # 36

[    1.096235] <3>.(3)[1:swapper/0][EMI DVFS FLIPER] prepare mt pp transfer: jiffies:4294937404-->4294937904

[    1.097420] <3>.(3)[1:swapper/0][EMI DVFS FLIPER] -  next jiffies:4294937404 >>> 4294937414

[    1.099382] <3>.(3)[1:swapper/0][THERM_CTRL] thermal_base=0xffffff8000e9c000

[    1.100277] <3>.(3)[1:swapper/0][THERM_CTRL] thermal_phy_base=0x1100b000

[    1.101124] <3>.(3)[1:swapper/0][THERM_CTRL] thermal_irq_number=0x30

[    1.101913] <3>.(3)[1:swapper/0][THERM_CTRL] auxadc_ts_base=0xffffffc074b8c3c8

[    1.102812] <3>.(3)[1:swapper/0][THERM_CTRL] auxadc_ts_phy_base=0x11001000

[    1.103670] <3>.(3)[1:swapper/0][THERM_CTRL] apmixed_ts_base=0xffffffc074b8a768

[    1.104580] <3>.(3)[1:swapper/0][THERM_CTRL] apmixed_phy_base=0x10209000

[    1.105412] <3>.(3)[1:swapper/0][THERM_CTRL] pericfg_base=0xffffffc074b6cb18

[    1.110161] <3>.(3)[1:swapper/0]Power/PMIC_Thermal: Reg(0x1E2)=0x4f8, Reg(0x1EA)=0x62ca, Reg(0x1EC)=0x1

[    1.111995] <3>.(3)[1:swapper/0]mtkts_bts_probe thermal bts 0 0

[    1.112725] <3>.(3)[1:swapper/0]Thermal mtkts_bts_prepare_table with 4

[    1.113641] <3>.(3)[1:swapper/0]------------[ cut here ]------------

[    1.114432] <3>.(3)[1:swapper/0]WARNING: CPU: 3 PID: 1 at ../../../../../../kernel/amazon/suez/drivers/base/core.c:551 device_create_file+0x7c/0xb4()

[    1.116096] <3>.(3)[1:swapper/0]Attribute params: read permission without 'show'

[    1.117015] Modules linked in:

[    1.117399] <3>.(3)[1:swapper/0]CPU: 3 PID: 1 Comm: swapper/0 Tainted: G S             3.18.19+ #2

[    1.118514] <3>.(3)[1:swapper/0]Hardware name: MT8173 (DT)

[    1.119197] <3>.(3)[1:swapper/0]Call trace:

[    1.119740] <3>.(3)[1:swapper/0][<ffffffc000087938>] dump_backtrace+0x0/0x124

[    1.120624] <3>.(3)[1:swapper/0][<ffffffc000087a6c>] show_stack+0x10/0x1c

[    1.121471] <3>.(3)[1:swapper/0][<ffffffc000a043d0>] dump_stack+0x74/0xb8

[    1.122316] <3>.(3)[1:swapper/0][<ffffffc000098c10>] warn_slowpath_fmt+0xb4/0xd8

[    1.123236] <3>.(3)[1:swapper/0][<ffffffc0003480b4>] device_create_file+0x78/0xb4

[    1.124171] <3>.(3)[1:swapper/0][<ffffffc0005dce98>] mtkts_bts_probe+0x178/0x25c

[    1.125094] <3>.(3)[1:swapper/0][<ffffffc00034ec20>] platform_drv_probe+0x48/0xc4

[    1.126025] <3>.(3)[1:swapper/0][<ffffffc00034cd84>] really_probe+0x7c/0x224

[    1.126903] <3>.(3)[1:swapper/0][<ffffffc00034cf80>] __device_attach+0x54/0x80

[    1.127803] <3>.(3)[1:swapper/0][<ffffffc00034b000>] bus_for_each_drv+0x50/0x94

[    1.128714] <3>.(3)[1:swapper/0][<ffffffc00034ccd8>] device_attach+0x9c/0xcc

[    1.129601] <3>.(3)[1:swapper/0][<ffffffc00034c368>] bus_probe_device+0x8c/0xb4

[    1.130505] <3>.(3)[1:swapper/0][<ffffffc000349fe0>] device_add+0x410/0x4ec

[    1.131373] <3>.(3)[1:swapper/0][<ffffffc00034ea40>] platform_device_add+0x170/0x228

[    1.132339] <3>.(3)[1:swapper/0][<ffffffc00034f554>] platform_device_register+0x24/0x34

[    1.133337] <3>.(3)[1:swapper/0][<ffffffc000e392d8>] mtkts_bts_init+0x44/0xc4

[    1.134225] <3>.(3)[1:swapper/0][<ffffffc0000816cc>] do_one_initcall+0x94/0x1cc

[    1.135139] <3>.(3)[1:swapper/0][<ffffffc000e0bbb0>] kernel_init_freeable+0x148/0x1ec

[    1.136112] <3>.(3)[1:swapper/0][<ffffffc0009fff20>] kernel_init+0x10/0x120

[    1.136980] <3>.(3)[1:swapper/0]---[ end trace 2f8320430276cd91 ]---

[    1.137875] <3>.(3)[1:swapper/0]mtkts_bts_probe thermal bts 1 0

[    1.138603] <3>.(3)[1:swapper/0]Thermal mtkts_bts_prepare_table with 4

[    1.139524] <3>.(3)[1:swapper/0]------------[ cut here ]------------

[    1.140311] <3>.(3)[1:swapper/0]WARNING: CPU: 3 PID: 1 at ../../../../../../kernel/amazon/suez/drivers/base/core.c:551 device_create_file+0x7c/0xb4()

[    1.141979] <3>.(3)[1:swapper/0]Attribute params: read permission without 'show'

[    1.142898] Modules linked in:

[    1.143280] <3>.(3)[1:swapper/0]CPU: 3 PID: 1 Comm: swapper/0 Tainted: G S      W      3.18.19+ #2

[    1.144396] <3>.(3)[1:swapper/0]Hardware name: MT8173 (DT)

[    1.145078] <3>.(3)[1:swapper/0]Call trace:

[    1.145603] <3>.(3)[1:swapper/0][<ffffffc000087938>] dump_backtrace+0x0/0x124

[    1.146492] <3>.(3)[1:swapper/0][<ffffffc000087a6c>] show_stack+0x10/0x1c

[    1.147337] <3>.(3)[1:swapper/0][<ffffffc000a043d0>] dump_stack+0x74/0xb8

[    1.148183] <3>.(3)[1:swapper/0][<ffffffc000098c10>] warn_slowpath_fmt+0xb4/0xd8

[    1.149104] <3>.(3)[1:swapper/0][<ffffffc0003480b4>] device_create_file+0x78/0xb4

[    1.150053] <3>.(3)[1:swapper/0][<ffffffc0005dce98>] mtkts_bts_probe+0x178/0x25c

[    1.150969] <3>.(3)[1:swapper/0][<ffffffc00034ec20>] platform_drv_probe+0x48/0xc4

[    1.151901] <3>.(3)[1:swapper/0][<ffffffc00034cd84>] really_probe+0x7c/0x224

[    1.152780] <3>.(3)[1:swapper/0][<ffffffc00034cf80>] __device_attach+0x54/0x80

[    1.153679] <3>.(3)[1:swapper/0][<ffffffc00034b000>] bus_for_each_drv+0x50/0x94

[    1.154591] <3>.(3)[1:swapper/0][<ffffffc00034ccd8>] device_attach+0x9c/0xcc

[    1.155469] <3>.(3)[1:swapper/0][<ffffffc00034c368>] bus_probe_device+0x8c/0xb4

[    1.156380] <3>.(3)[1:swapper/0][<ffffffc000349fe0>] device_add+0x410/0x4ec

[    1.157261] <3>.(3)[1:swapper/0][<ffffffc00034ea40>] platform_device_add+0x170/0x228

[    1.158219] <3>.(3)[1:swapper/0][<ffffffc00034f554>] platform_device_register+0x24/0x34

[    1.159217] <3>.(3)[1:swapper/0][<ffffffc000e39300>] mtkts_bts_init+0x6c/0xc4

[    1.160115] <3>.(3)[1:swapper/0][<ffffffc0000816cc>] do_one_initcall+0x94/0x1cc

[    1.161020] <3>.(3)[1:swapper/0][<ffffffc000e0bbb0>] kernel_init_freeable+0x148/0x1ec

[    1.161994] <3>.(3)[1:swapper/0][<ffffffc0009fff20>] kernel_init+0x10/0x120

[    1.162861] <3>.(3)[1:swapper/0]---[ end trace 2f8320430276cd92 ]---

[    1.163756] <3>.(3)[1:swapper/0]mtkts_bts_probe thermal bts 2 0

[    1.164485] <3>.(3)[1:swapper/0]Thermal mtkts_bts_prepare_table with 4

[    1.165394] <3>.(3)[1:swapper/0]------------[ cut here ]------------

[    1.166180] <3>.(3)[1:swapper/0]WARNING: CPU: 3 PID: 1 at ../../../../../../kernel/amazon/suez/drivers/base/core.c:551 device_create_file+0x7c/0xb4()

[    1.167849] <3>.(3)[1:swapper/0]Attribute params: read permission without 'show'

[    1.168768] Modules linked in:

[    1.169150] <3>.(3)[1:swapper/0]CPU: 3 PID: 1 Comm: swapper/0 Tainted: G S      W      3.18.19+ #2

[    1.170276] <3>.(3)[1:swapper/0]Hardware name: MT8173 (DT)

[    1.170949] <3>.(3)[1:swapper/0]Call trace:

[    1.171473] <3>.(3)[1:swapper/0][<ffffffc000087938>] dump_backtrace+0x0/0x124

[    1.172363] <3>.(3)[1:swapper/0][<ffffffc000087a6c>] show_stack+0x10/0x1c

[    1.173209] <3>.(3)[1:swapper/0][<ffffffc000a043d0>] dump_stack+0x74/0xb8

[    1.174053] <3>.(3)[1:swapper/0][<ffffffc000098c10>] warn_slowpath_fmt+0xb4/0xd8

[    1.174976] <3>.(3)[1:swapper/0][<ffffffc0003480b4>] device_create_file+0x78/0xb4

[    1.175908] <3>.(3)[1:swapper/0][<ffffffc0005dce98>] mtkts_bts_probe+0x178/0x25c

[    1.176832] <3>.(3)[1:swapper/0][<ffffffc00034ec20>] platform_drv_probe+0x48/0xc4

[    1.177764] <3>.(3)[1:swapper/0][<ffffffc00034cd84>] really_probe+0x7c/0x224

[    1.178642] <3>.(3)[1:swapper/0][<ffffffc00034cf80>] __device_attach+0x54/0x80

[    1.179550] <3>.(3)[1:swapper/0][<ffffffc00034b000>] bus_for_each_drv+0x50/0x94

[    1.180454] <3>.(3)[1:swapper/0][<ffffffc00034ccd8>] device_attach+0x9c/0xcc

[    1.181332] <3>.(3)[1:swapper/0][<ffffffc00034c368>] bus_probe_device+0x8c/0xb4

[    1.182243] <3>.(3)[1:swapper/0][<ffffffc000349fe0>] device_add+0x410/0x4ec

[    1.183111] <3>.(3)[1:swapper/0][<ffffffc00034ea40>] platform_device_add+0x170/0x228

[    1.184077] <3>.(3)[1:swapper/0][<ffffffc00034f554>] platform_device_register+0x24/0x34

[    1.185074] <3>.(3)[1:swapper/0][<ffffffc000e39328>] mtkts_bts_init+0x94/0xc4

[    1.185963] <3>.(3)[1:swapper/0][<ffffffc0000816cc>] do_one_initcall+0x94/0x1cc

[    1.186875] <3>.(3)[1:swapper/0][<ffffffc000e0bbb0>] kernel_init_freeable+0x148/0x1ec

[    1.187850] <3>.(3)[1:swapper/0][<ffffffc0009fff20>] kernel_init+0x10/0x120

[    1.188717] <3>.(3)[1:swapper/0]---[ end trace 2f8320430276cd93 ]---

[    1.189899] <3>.(3)[1:swapper/0][cmb_stub] thermal_ctrl_cb null

[    1.195355] <2>.(2)[77:hang_detect][Hang_Detect] hang_detect thread starts.

[    1.196228] <2>.(2)[77:hang_detect]mirdump: reserved 444f0000+2000->ffffff8000f82000

[    1.196230] <2>.(2)[77:hang_detect][Hang_Detect] hang_detect disabled.

[    1.198162] <3>.(3)[1:swapper/0][MD32] Open MD32 image /md32_d.bin FAIL! (-2)

[    1.199045] <3>.(3)[1:swapper/0]MD32 boot up failed --> can not get data image size

[    1.200029] <3>.(3)[1:swapper/0][MD32] boot up failed!!! free images

[    1.201241] <3>.(3)[1:swapper/0]get EMI_BASE_ADDR @ ffffff8000eb2000

[    1.204643] <3>.(3)[1:swapper/0]mt6397-regulator mt6397-regulator: Chip ID = 0x2091

[    1.205698] <3>.(3)[1:swapper/0]vpca15: 700 <--> 1350 mV at 1000 mV

[    1.206645] <3>.(3)[1:swapper/0]vpca7: 700 <--> 1350 mV at 1200 mV

[    1.207581] <3>.(3)[1:swapper/0]vsramca15: 700 <--> 1350 mV at 1012 mV

[    1.208535] <3>.(3)[1:swapper/0]vsramca7: 700 <--> 1350 mV at 1100 mV

[    1.209508] <3>.(3)[1:swapper/0]vcore: 700 <--> 1350 mV at 1093 mV

[    1.210429] <3>.(3)[1:swapper/0]vgpu: 700 <--> 1350 mV at 1000 mV

[    1.211336] <3>.(3)[1:swapper/0]vdrm: 1200 <--> 1400 mV at 1225 mV

[    1.212268] <3>.(3)[1:swapper/0]vio18: 1620 <--> 1980 mV at 1800 mV

[    1.213193] <3>.(3)[1:swapper/0]vtcxo: 2800 mV

[    1.213871] <3>.(3)[1:swapper/0]va28: 2800 mV

[    1.214547] <3>.(3)[1:swapper/0]vcama: 1500 <--> 2800 mV at 2800 mV

[    1.215471] <3>.(3)[1:swapper/0]vio28: 2800 mV

[    1.216146] <3>.(3)[1:swapper/0]vusb: 3300 mV

[    1.216820] <3>.(3)[1:swapper/0]vmc: 1800 <--> 3300 mV at 3300 mV

[    1.217736] <3>.(3)[1:swapper/0]vmch: 3000 <--> 3300 mV at 3300 mV

[    1.218649] <3>.(3)[1:swapper/0]vemc_3v3: 3000 <--> 3300 mV at 3300 mV

[    1.219631] <3>.(3)[1:swapper/0]vcamd: 1220 <--> 3300 mV at 2800 mV

[    1.220554] <3>.(3)[1:swapper/0]vcamio: 1000 <--> 3300 mV at 2800 mV

[    1.221494] <3>.(3)[1:swapper/0]vcamaf: 1200 <--> 3300 mV at 2800 mV

[    1.222437] <3>.(3)[1:swapper/0]vgp4: 1200 <--> 3300 mV at 2800 mV

[    1.223693] <3>.(3)[1:swapper/0]vgp5: 1200 <--> 3000 mV at 1800 mV

[    1.224631] <3>.(3)[1:swapper/0]vgp6: 1200 <--> 3300 mV at 3300 mV

[    1.225549] <3>.(3)[1:swapper/0]vibr: 1300 <--> 3300 mV at 3000 mV

[    1.226483] <3>.(3)[1:swapper/0]mtk_pctrl_init++++++

[    1.230064] <3>.(3)[1:swapper/0]tun: Universal TUN/TAP device driver, 1.6

[    1.230906] <3>.(3)[1:swapper/0]tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>

[    1.231963] <3>.(3)[1:swapper/0]PPP generic driver version 2.4.2

[    1.232804] <3>.(3)[1:swapper/0]PPP BSD Compression module registered

[    1.233604] <3>.(3)[1:swapper/0]PPP Deflate Compression module registered

[    1.234459] <3>.(3)[1:swapper/0]PPP MPPE Compression module registered

[    1.235360] <3>.(3)[1:swapper/0]usbcore: registered new interface driver ax88179_178a

[    1.236364] <3>.(3)[1:swapper/0]usbcore: registered new interface driver cdc_ether

[    1.237336] <3>.(3)[1:swapper/0]usbcore: registered new interface driver cdc_eem

[    1.238287] <3>.(3)[1:swapper/0]usbcore: registered new interface driver dm9601

[    1.239225] <3>.(3)[1:swapper/0]usbcore: registered new interface driver rndis_host

[    1.240253] <3>.(3)[1:swapper/0]usbcore: registered new interface driver cdc_ncm

[    1.241203] <3>.(3)[1:swapper/0]usbcore: registered new interface driver cdc_mbim

[    1.242133] <3>.(3)[1:swapper/0]ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver

[    1.243649] <3>.(3)[1:swapper/0]usbcore: registered new interface driver cdc_wdm

[    1.244622] <3>.(3)[1:swapper/0]usbcore: registered new interface driver usb-storage

[    1.245609] <3>.(3)[1:swapper/0]usbcore: registered new interface driver ums-alauda

[    1.246585] <3>.(3)[1:swapper/0]usbcore: registered new interface driver ums-cypress

[    1.247571] <3>.(3)[1:swapper/0]usbcore: registered new interface driver ums-datafab

[    1.248557] <3>.(3)[1:swapper/0]usbcore: registered new interface driver ums-freecom

[    1.249561] <3>.(3)[1:swapper/0]usbcore: registered new interface driver ums-isd200

[    1.250537] <3>.(3)[1:swapper/0]usbcore: registered new interface driver ums-jumpshot

[    1.251537] <3>.(3)[1:swapper/0]usbcore: registered new interface driver ums-karma

[    1.252502] <3>.(3)[1:swapper/0]usbcore: registered new interface driver ums-onetouch

[    1.253499] <3>.(3)[1:swapper/0]usbcore: registered new interface driver ums-sddr09

[    1.254475] <3>.(3)[1:swapper/0]usbcore: registered new interface driver ums-sddr55

[    1.255450] <3>.(3)[1:swapper/0]usbcore: registered new interface driver ums-usbat

[    1.256483] <3>.(3)[1:swapper/0]usbcore: registered new interface driver usbserial

[    1.257464] <3>.(3)[1:swapper/0]usbcore: registered new interface driver option

[    1.258394] <3>.(3)[1:swapper/0]usbserial: USB Serial support registered for GSM modem (1-port)

[    1.259519] <3>.(3)[1:swapper/0]usbcore: registered new interface driver trancevibrator

[    1.261354] <3>.(3)[1:swapper/0]kpd: Keypad probe start!!!

[    1.262107] <3>.(3)[1:swapper/0]kpd: kp base: 0xffffff8000eb6000, addr:0xffffffc001129760,  kp irq: 99

[    1.263284] <3>.(3)[1:swapper/0]kpd: key-debounce = 1024, sw-pwrkey = 116, hw-pwrkey = 8, hw-rstkey = 0, sw-rstkey = 0

[    1.264613] <3>.(3)[1:swapper/0]kpd: init_keymap_state done: ffff ffff ffff ffff ff!

[    1.265721] <3>.(3)[1:swapper/0]input: mtk-kpd as /devices/soc/10010000.keypad/input/input1

[    1.266930] <3>.(3)[1:swapper/0]kpd: Normal Boot long press reboot selection

[    1.267800] <3>.(3)[1:swapper/0]kpd: Enable normal mode LPRST

[    1.268538] <3>.(3)[1:swapper/0]kpd: kpd_pdrv_probe Done

[    1.269396] <3>.(3)[1:swapper/0]usbcore: registered new interface driver xpad

[    1.270338] <3>.(3)[1:swapper/0]usbcore: registered new interface driver usb_acecad

[    1.271322] <3>.(3)[1:swapper/0]usbcore: registered new interface driver aiptek

[    1.272262] <3>.(3)[1:swapper/0]usbcore: registered new interface driver gtco

[    1.273180] <3>.(3)[1:swapper/0]usbcore: registered new interface driver hanwang

[    1.274130] <3>.(3)[1:swapper/0]usbcore: registered new interface driver kbtab

[    1.275087] <3>.(3)[1:swapper/0][tpd_em_log] :register device successfully

[    1.276564] <3>.(3)[1:swapper/0]input: Unspecified device as /devices/virtual/input/input2

[    1.278212] <3>.(3)[1:swapper/0]i2c /dev entries driver

[    1.281841] <3>.(3)[1:swapper/0]VDVFS: 600 <--> 1393 mV at 1000 mV

[    1.283188] <3>.(3)[1:swapper/0]VBIASN: 200 <--> 800 mV

[    1.286928] <3>.(3)[1:swapper/0][LCM-NT51021-WUXGA-DSI-VDO] nt51021_probe (line:534) :name=nt51021_i2c, addr=0x6f

[    1.288738] <3>.(3)[1:swapper/0]usbcore: registered new interface driver uvcvideo

[    1.289684] <3>.(3)[1:swapper/0]USB Video Class driver (1.1.1)

[    1.294054] <3>.(3)[1:swapper/0]proc_create battery_profile_index_proc_fops

[    1.294916] <3>.(3)[1:swapper/0]proc_create battery_profile_proc_fops

[    1.295718] <3>.(3)[1:swapper/0]proc_create battery_r_profile_proc_fops

[    1.296542] <3>.(3)[1:swapper/0]proc_create battery_q_max_proc_fops

[    1.297415] <3>.(3)[1:swapper/0]------------[ cut here ]------------

[    1.298206] <3>.(3)[1:swapper/0]WARNING: CPU: 3 PID: 1 at ../../../../../../kernel/amazon/suez/drivers/base/core.c:548 device_create_file+0x9c/0xb4()

[    1.299883] <3>.(3)[1:swapper/0]Attribute battery_vendor: write permission without 'store'

[    1.300903] Modules linked in:

[    1.301287] <3>.(3)[1:swapper/0]CPU: 3 PID: 1 Comm: swapper/0 Tainted: G S      W      3.18.19+ #2

[    1.302402] <3>.(3)[1:swapper/0]Hardware name: MT8173 (DT)

[    1.303084] <3>.(3)[1:swapper/0]Call trace:

[    1.303615] <3>.(3)[1:swapper/0][<ffffffc000087938>] dump_backtrace+0x0/0x124

[    1.304498] <3>.(3)[1:swapper/0][<ffffffc000087a6c>] show_stack+0x10/0x1c

[    1.305346] <3>.(3)[1:swapper/0][<ffffffc000a043d0>] dump_stack+0x74/0xb8

[    1.306189] <3>.(3)[1:swapper/0][<ffffffc000098c10>] warn_slowpath_fmt+0xb4/0xd8

[    1.307123] <3>.(3)[1:swapper/0][<ffffffc0003480d4>] device_create_file+0x98/0xb4

[    1.308051] <3>.(3)[1:swapper/0][<ffffffc000710928>] battery_meter_probe+0x250/0x3d8

[    1.309017] <3>.(3)[1:swapper/0][<ffffffc00034ec20>] platform_drv_probe+0x48/0xc4

[    1.309957] <3>.(3)[1:swapper/0][<ffffffc00034cd84>] really_probe+0x7c/0x224

[    1.310829] <3>.(3)[1:swapper/0][<ffffffc00034d154>] driver_probe_device+0x2c/0x58

[    1.311772] <3>.(3)[1:swapper/0][<ffffffc00034d218>] __driver_attach+0x98/0xa0

[    1.312672] <3>.(3)[1:swapper/0][<ffffffc00034af6c>] bus_for_each_dev+0x54/0x98

[    1.313583] <3>.(3)[1:swapper/0][<ffffffc00034c9a0>] driver_attach+0x1c/0x28

[    1.314461] <3>.(3)[1:swapper/0][<ffffffc00034c61c>] bus_add_driver+0x150/0x208

[    1.315373] <3>.(3)[1:swapper/0][<ffffffc00034db3c>] driver_register+0x70/0x138

[    1.316285] <3>.(3)[1:swapper/0][<ffffffc00034eb54>] __platform_driver_register+0x5c/0x68

[    1.317304] <3>.(3)[1:swapper/0][<ffffffc000e3f160>] battery_meter_init+0x1c/0x78

[    1.318236] <3>.(3)[1:swapper/0][<ffffffc0000816cc>] do_one_initcall+0x94/0x1cc

[    1.319149] <3>.(3)[1:swapper/0][<ffffffc000e0bbb0>] kernel_init_freeable+0x148/0x1ec

[    1.320134] <3>.(3)[1:swapper/0][<ffffffc0009fff20>] kernel_init+0x10/0x120

[    1.321013] <2>.(2)[1:swapper/0]---[ end trace 2f8320430276cd94 ]---

[    1.321807] <2>.(2)[1:swapper/0]------------[ cut here ]------------

[    1.322596] <2>.(2)[1:swapper/0]WARNING: CPU: 2 PID: 1 at ../../../../../../kernel/amazon/suez/drivers/base/core.c:548 device_create_file+0x9c/0xb4()

[    1.324263] <2>.(2)[1:swapper/0]Attribute board_type: write permission without 'store'

[    1.325246] Modules linked in:

[    1.325629] <2>.(2)[1:swapper/0]CPU: 2 PID: 1 Comm: swapper/0 Tainted: G S      W      3.18.19+ #2

[    1.326745] <2>.(2)[1:swapper/0]Hardware name: MT8173 (DT)

[    1.327427] <2>.(2)[1:swapper/0]Call trace:

[    1.327952] <2>.(2)[1:swapper/0][<ffffffc000087938>] dump_backtrace+0x0/0x124

[    1.328841] <2>.(2)[1:swapper/0][<ffffffc000087a6c>] show_stack+0x10/0x1c

[    1.329709] <2>.(2)[1:swapper/0][<ffffffc000a043d0>] dump_stack+0x74/0xb8

[    1.330548] <2>.(2)[1:swapper/0][<ffffffc000098c10>] warn_slowpath_fmt+0xb4/0xd8

[    1.331470] <2>.(2)[1:swapper/0][<ffffffc0003480d4>] device_create_file+0x98/0xb4

[    1.332404] <2>.(2)[1:swapper/0][<ffffffc000710934>] battery_meter_probe+0x25c/0x3d8

[    1.333371] <2>.(2)[1:swapper/0][<ffffffc00034ec20>] platform_drv_probe+0x48/0xc4

[    1.334302] <2>.(2)[1:swapper/0][<ffffffc00034cd84>] really_probe+0x7c/0x224

[    1.335180] <2>.(2)[1:swapper/0][<ffffffc00034d154>] driver_probe_device+0x2c/0x58

[    1.336124] <2>.(2)[1:swapper/0][<ffffffc00034d218>] __driver_attach+0x98/0xa0

[    1.337024] <2>.(2)[1:swapper/0][<ffffffc00034af6c>] bus_for_each_dev+0x54/0x98

[    1.337934] <2>.(2)[1:swapper/0][<ffffffc00034c9a0>] driver_attach+0x1c/0x28

[    1.338813] <2>.(2)[1:swapper/0][<ffffffc00034c61c>] bus_add_driver+0x150/0x208

[    1.339826] <2>.(2)[1:swapper/0][<ffffffc00034db3c>] driver_register+0x70/0x138

[    1.340732] <2>.(2)[1:swapper/0][<ffffffc00034eb54>] __platform_driver_register+0x5c/0x68

[    1.341750] <2>.(2)[1:swapper/0][<ffffffc000e3f160>] battery_meter_init+0x1c/0x78

[    1.342682] <2>.(2)[1:swapper/0][<ffffffc0000816cc>] do_one_initcall+0x94/0x1cc

[    1.343595] <2>.(2)[1:swapper/0][<ffffffc000e0bbb0>] kernel_init_freeable+0x148/0x1ec

[    1.344569] <2>.(2)[1:swapper/0][<ffffffc0009fff20>] kernel_init+0x10/0x120

[    1.345436] <2>.(2)[1:swapper/0]---[ end trace 2f8320430276cd95 ]---

[    1.346235] <2>.(2)[1:swapper/0]------------[ cut here ]------------

[    1.347022] <2>.(2)[1:swapper/0]WARNING: CPU: 2 PID: 1 at ../../../../../../kernel/amazon/suez/drivers/base/core.c:548 device_create_file+0x9c/0xb4()

[    1.348691] <2>.(2)[1:swapper/0]Attribute FG_CV_Voltage_Reduction_Supported: write permission without 'store'

[    1.349935] Modules linked in:

[    1.350306] <2>.(2)[1:swapper/0]CPU: 2 PID: 1 Comm: swapper/0 Tainted: G S      W      3.18.19+ #2

[    1.351423] <2>.(2)[1:swapper/0]Hardware name: MT8173 (DT)

[    1.352105] <2>.(2)[1:swapper/0]Call trace:

[    1.352629] <2>.(2)[1:swapper/0][<ffffffc000087938>] dump_backtrace+0x0/0x124

[    1.353518] <2>.(2)[1:swapper/0][<ffffffc000087a6c>] show_stack+0x10/0x1c

[    1.354364] <2>.(2)[1:swapper/0][<ffffffc000a043d0>] dump_stack+0x74/0xb8

[    1.355209] <2>.(2)[1:swapper/0][<ffffffc000098c10>] warn_slowpath_fmt+0xb4/0xd8

[    1.356131] <2>.(2)[1:swapper/0][<ffffffc0003480d4>] device_create_file+0x98/0xb4

[    1.357064] <2>.(2)[1:swapper/0][<ffffffc00071094c>] battery_meter_probe+0x274/0x3d8

[    1.358030] <2>.(2)[1:swapper/0][<ffffffc00034ec20>] platform_drv_probe+0x48/0xc4

[    1.358962] <2>.(2)[1:swapper/0][<ffffffc00034cd84>] really_probe+0x7c/0x224

[    1.359851] <2>.(2)[1:swapper/0][<ffffffc00034d154>] driver_probe_device+0x2c/0x58

[    1.360788] <2>.(2)[1:swapper/0][<ffffffc00034d218>] __driver_attach+0x98/0xa0

[    1.361687] <2>.(2)[1:swapper/0][<ffffffc00034af6c>] bus_for_each_dev+0x54/0x98

[    1.362599] <2>.(2)[1:swapper/0][<ffffffc00034c9a0>] driver_attach+0x1c/0x28

[    1.363478] <2>.(2)[1:swapper/0][<ffffffc00034c61c>] bus_add_driver+0x150/0x208

[    1.364389] <2>.(2)[1:swapper/0][<ffffffc00034db3c>] driver_register+0x70/0x138

[    1.365300] <2>.(2)[1:swapper/0][<ffffffc00034eb54>] __platform_driver_register+0x5c/0x68

[    1.366319] <2>.(2)[1:swapper/0][<ffffffc000e3f160>] battery_meter_init+0x1c/0x78

[    1.367251] <2>.(2)[1:swapper/0][<ffffffc0000816cc>] do_one_initcall+0x94/0x1cc

[    1.368163] <2>.(2)[1:swapper/0][<ffffffc000e0bbb0>] kernel_init_freeable+0x148/0x1ec

[    1.369139] <2>.(2)[1:swapper/0][<ffffffc0009fff20>] kernel_init+0x10/0x120

[    1.370018] <2>.(2)[1:swapper/0]---[ end trace 2f8320430276cd96 ]---

[    1.370947] <2>.(2)[1:swapper/0]10-006b supply reg-i2c not found, using dummy regulator

[    1.371981] <2>.(2)[1:swapper/0]bq24297 10-006b: Fail to set 1.8V to reg-i2c: -22

[    1.373363] <2>.(2)[1:swapper/0]BQ24296 device is found. register charger control.

[    1.380587] <3>.(3)[1:swapper/0]i2c-core: driver [bq24297] using legacy suspend method

[    1.381566] <3>.(3)[1:swapper/0]i2c-core: driver [bq24297] using legacy resume method

[    1.383109] <3>.(3)[1:swapper/0]******** MTK WDT driver probe!! ********

[    1.384107] <3>.(3)[1:swapper/0]mtk_wdt_probe : done WDT_MODE(5d),MTK_WDT_NONRST_REG(0)

[    1.385699] <3>.(3)[1:swapper/0]device-mapper: uevent: version 1.0.3

[    1.386667] <3>.(3)[1:swapper/0]device-mapper: ioctl: 4.28.0-ioctl (2014-09-17) initialised: dm-devel@redhat.com

[    1.389985] <3>.(3)[1:swapper/0]vio18: unsupportable voltage range: 3300000-1980000uV

[    1.390960] <3>.(3)[1:swapper/0]mtk-msdc 11230000.mmc: Regulator set error -22: 3300000 - 3300000

[    1.429845] <3>.(3)[1:swapper/0]mtk-msdc 11240000.mmc: Got CD GPIO

[    1.470634] <0>.(0)[1:swapper/0][sd]of msdc DT probe sdio!, hostId:3

[    1.471439] <0>.(0)[1:swapper/0][sd]of_iomap for msdc @ 0xffffff8000ff2000

[    1.472296] <0>.(0)[1:swapper/0][sd]of_top_iomap for msdc @ 0xffffff8000ff2000

[    1.473211] <0>.(0)[1:swapper/0][sd]msdc get irq # 56

[    1.473835] <0>.(0)[1:swapper/0][sd][MSDC3] cd-gpios isn't found in DT

[    1.474644] <0>.(0)[1:swapper/0][sd][MSDC3] register_setting is not found in DT.

[    1.475608] <0>.(0)[1:swapper/0][sd]of_iomap for gpio base @ 0xffffff8000ff6000

[    1.477041] <0>.(0)[1:swapper/0][sd]of_iomap for APMIXED base @ 0xffffff8001032000

[    1.477996] <0>.(0)[1:swapper/0][sd]of_iomap for TOPCKGEN base @ 0xffffff8001034000

[    1.479068] <0>.(0)[1:swapper/0]11260000.sdio supply VEMC_3V3 not found, using dummy regulator

[    1.480291] <0>.(0)[1:swapper/0]11260000.sdio supply VMC not found, using dummy regulator

[    1.481379] <0>.(0)[1:swapper/0]11260000.sdio supply VMCH not found, using dummy regulator

[    1.482433] <0>.(0)[1:swapper/0][sd]platform_data hw:0xffffffc020353cc0, is msdc3

[    1.483493] <0>.(0)[1:swapper/0]enter mtk_wcn_cmb_sdio_request_eirq

[    1.484566] <0>.(0)[1:swapper/0]WIFI EINT irq 102 !!

[    1.485177] <0>.(0)[1:swapper/0]exit mtk_wcn_cmb_sdio_request_eirq

[    1.486303] [sd]msdc3 drving<clk 3,cmd 3,dat 3>

[    1.486846] <1>.(1)[1:swapper/0][sd]msdc3 -> No power control, host_function<0x2> & Power_domain<0> <- msdc_set_power_mode() : L<2404> PID<swapper/0><0x1>

[    1.509667] <1>.(1)[1:swapper/0][sd]msdc3 Set<400K> src:<200000K> sclk:<400K> timing<0> mode:0 div:125 cfg:0x207d99

[    1.529831] <1>.(1)[1:swapper/0][msdc_debug_proc_init]: successfully create /proc/msdc_debug

[    1.530882] <1>.(1)[1:swapper/0][msdc_debug_proc_init]: successfully create /proc/msdc_help

[    1.531923] <1>.(1)[1:swapper/0][msdc_debug_proc_init]: successfully create /proc/msdc_FT

[    1.532942] <1>.(1)[1:swapper/0][msdc_debug_proc_init]: successfully create /proc/msdc_tune

[    1.533983] <1>.(1)[1:swapper/0][msdc_debug_proc_init]: successfully create /proc/msdc_tune_flag

[    1.595560] <0>.(0)[72:kworker/u8:1]mtk-msdc 11230000.mmc: phase: [map:ffffffbf] [maxlen:25] [final:19]

[    1.596729] <0>.(0)[72:kworker/u8:1]mtk-msdc 11230000.mmc: Final cmd pad delay: 13

[    1.609967] <1>.(1)[1:swapper/0]i2c-core: driver [lp855x_led] using legacy suspend method

[    1.610979] <1>.(1)[1:swapper/0]i2c-core: driver [lp855x_led] using legacy resume method

[    1.612082] <1>.(1)[1:swapper/0]hidraw: raw HID events driver (C) Jiri Kosina

[    1.615393] <1>.(1)[1:swapper/0]usbcore: registered new interface driver usbhid

[    1.616295] <1>.(1)[1:swapper/0]usbhid: USB HID core driver

[    1.617568] <1>.(1)[1:swapper/0]ashmem: initialized

[    1.618281] <1>.(1)[1:swapper/0]logger: created 256K log 'log_main'

[    1.619156] <1>.(1)[1:swapper/0]logger: created 256K log 'log_events'

[    1.620087] <1>.(1)[1:swapper/0]logger: created 256K log 'log_radio'

[    1.620970] <1>.(1)[1:swapper/0]logger: created 256K log 'log_system'

[    1.621865] <1>.(1)[1:swapper/0]logger: created 256K log 'log_kernel'

[    1.622780] <1>.(1)[1:swapper/0]logger: created 128K log 'log_metrics'

[    1.623684] <1>.(1)[1:swapper/0]logger: created 256K log 'log_amazon_main'

[    1.624617] <1>.(1)[1:swapper/0]logger: created 128K log 'log_vitals'

[    1.625822] <1>.(1)[1:swapper/0]Registering kernel log console

[    1.628687] <1>.(1)[1:swapper/0]console [klog-1] enabled

[    1.629956] <2>.(2)[1:swapper/0]usbcore: registered new interface driver snd-usb-audio

[    1.630076] <2>.(0)[72:kworker/u8:1]mmc0: new HS400 MMC card at address 0001

[    1.632932] <1>.(1)[72:kworker/u8:1]mmcblk0: mmc0:0001 DF4032 29.1 GiB

[    1.633895] <1>.(1)[72:kworker/u8:1]mmcblk0boot0: mmc0:0001 DF4032 partition 1 1.00 MiB

[    1.635016] <2>.(2)[72:kworker/u8:1]mmcblk0boot1: mmc0:0001 DF4032 partition 2 4.00 MiB

[    1.636148] <0>.(0)[72:kworker/u8:1]mmcblk0rpmb: mmc0:0001 DF4032 partition 3 4.00 MiB

[    1.637757] <3>.(3)[1:swapper/0]------------[ cut here ]------------

[    1.638556] <3>.(3)[1:swapper/0]WARNING: CPU: 3 PID: 1 at ../../../../../../kernel/amazon/suez/drivers/base/core.c:548 device_create_file+0x9c/0xb4()

[    1.640241] <3>.(3)[1:swapper/0]Attribute rt5514_id: write permission without 'store'

[    1.640704] <3>.(1)[72:kworker/u8:1] mmcblk0: p1 p2 p3 p4 p5 p6 p7 p8 p9 p10 p11 p12 p13 p14 p15 p16 p17

[    1.642392] Modules linked in:

[    1.642775] <3>.(3)[1:swapper/0]CPU: 3 PID: 1 Comm: swapper/0 Tainted: G S      W      3.18.19+ #2

[    1.643890] <3>.(3)[1:swapper/0]Hardware name: MT8173 (DT)

[    1.644573] <3>.(3)[1:swapper/0]Call trace:

[    1.645103] <3>.(3)[1:swapper/0][<ffffffc000087938>] dump_backtrace+0x0/0x124

[    1.645433] <3>.(1)[72:kworker/u8:1]Primary GPT is invalid, using alternate GPT.

[    1.645462] <3>.(1)[72:kworker/u8:1] mmcblk0boot0: p1 p2 p3 p4

[    1.646262] <3>.(1)[72:kworker/u8:1]mtk-msdc 11240000.mmc: crc/total 0/0 invalcrc 0 datato 0 cmdto 0 reqto 0 total_pc 1 pc_sus 0

[    1.649081] <3>.(3)[1:swapper/0][<ffffffc000087a6c>] show_stack+0x10/0x1c

[    1.649938] <3>.(3)[1:swapper/0][<ffffffc000a043d0>] dump_stack+0x74/0xb8

[    1.650780] <3>.(3)[1:swapper/0][<ffffffc000098c10>] warn_slowpath_fmt+0xb4/0xd8

[    1.651700] <3>.(3)[1:swapper/0][<ffffffc0003480d4>] device_create_file+0x98/0xb4

[    1.652636] <3>.(3)[1:swapper/0][<ffffffc000850b14>] rt5514_i2c_probe+0x1ac/0x2b4

[    1.653568] <3>.(3)[1:swapper/0][<ffffffc0006d97e0>] i2c_device_probe+0xd0/0x11c

[    1.654490] <3>.(3)[1:swapper/0][<ffffffc00034cd84>] really_probe+0x7c/0x224

[    1.655367] <3>.(3)[1:swapper/0][<ffffffc00034d154>] driver_probe_device+0x2c/0x58

[    1.656311] <3>.(3)[1:swapper/0][sd]msdc3 drving<clk 3,cmd 3,dat 3>

[    1.656313] <3>.(3)[1:swapper/0][<ffffffc00034d218>] __driver_attach+0x98/0xa0

[    1.657993] <3>.(3)[1:swapper/0][<ffffffc00034af6c>] bus_for_each_dev+0x54/0x98

[    1.658904] <3>.(3)[1:swapper/0][<ffffffc00034c9a0>] driver_attach+0x1c/0x28

[    1.659791] <3>.(3)[1:swapper/0][<ffffffc00034c61c>] bus_add_driver+0x150/0x208

[    1.660699] <3>.(3)[1:swapper/0][<ffffffc00034db3c>] driver_register+0x70/0x138

[    1.661608] <3>.(3)[1:swapper/0][<ffffffc0006d9cf8>] i2c_register_driver+0x34/0xe8

[    1.662553] <3>.(3)[1:swapper/0][<ffffffc000e4a074>] rt5514_i2c_driver_init+0x14/0x20

[    1.663529] <3>.(3)[1:swapper/0][<ffffffc0000816cc>] do_one_initcall+0x94/0x1cc

[    1.664441] <3>.(3)[1:swapper/0][<ffffffc000e0bbb0>] kernel_init_freeable+0x148/0x1ec

[    1.665415] <3>.(3)[1:swapper/0][<ffffffc0009fff20>] kernel_init+0x10/0x120

[    1.666282] <3>.(3)[1:swapper/0][sd]msdc3 -> !!! Set<0 Hz>

[    1.666284] <3>.(3)[1:swapper/0]---[ end trace 2f8320430276cd97 ]---

[    1.666658] <3>.(1)[72:kworker/u8:1][sd]msdc3 drving<clk 3,cmd 3,dat 3>

[    1.666660] <3>.(1)[72:kworker/u8:1][sd]msdc3 -> No power control, host_function<0x2> & Power_domain<0> <- msdc_set_power_mode() : L<2404> PID<kworker/u8:1><0x48>

[    1.670409] <3>.(3)[1:swapper/0]------------[ cut here ]------------

[    1.671198] <3>.(3)[1:swapper/0]WARNING: CPU: 3 PID: 1 at ../../../../../../kernel/amazon/suez/drivers/base/core.c:548 device_create_file+0x9c/0xb4()

[    1.672866] <3>.(3)[1:swapper/0]Attribute rt5514_version: write permission without 'store'

[    1.673894] Modules linked in:

[    1.674275] <3>.(3)[1:swapper/0]CPU: 3 PID: 1 Comm: swapper/0 Tainted: G S      W      3.18.19+ #2

[    1.675392] <3>.(3)[1:swapper/0]Hardware name: MT8173 (DT)

[    1.676074] <3>.(3)[1:swapper/0]Call trace:

[    1.676598] <3>.(3)[1:swapper/0][<ffffffc000087938>] dump_backtrace+0x0/0x124

[    1.677487] <3>.(3)[1:swapper/0][<ffffffc000087a6c>] show_stack+0x10/0x1c

[    1.678334] <3>.(3)[1:swapper/0][<ffffffc000a043d0>] dump_stack+0x74/0xb8

[    1.679178] <3>.(3)[1:swapper/0][<ffffffc000098c10>] warn_slowpath_fmt+0xb4/0xd8

[    1.680110] <3>.(3)[1:swapper/0][<ffffffc0003480d4>] device_create_file+0x98/0xb4

[    1.681039] <3>.(3)[1:swapper/0][<ffffffc000850b2c>] rt5514_i2c_probe+0x1c4/0x2b4

[    1.681970] <3>.(3)[1:swapper/0][<ffffffc0006d97e0>] i2c_device_probe+0xd0/0x11c

[    1.682893] <3>.(3)[1:swapper/0][<ffffffc00034cd84>] really_probe+0x7c/0x224

[    1.683772] <3>.(3)[1:swapper/0][<ffffffc00034d154>] driver_probe_device+0x2c/0x58

[    1.684715] <3>.(3)[1:swapper/0][<ffffffc00034d218>] __driver_attach+0x98/0xa0

[    1.685615] <3>.(3)[1:swapper/0][<ffffffc00034af6c>] bus_for_each_dev+0x54/0x98

[    1.686526] <3>.(3)[1:swapper/0][<ffffffc00034c9a0>] driver_attach+0x1c/0x28

[    1.687405] <3>.(3)[1:swapper/0][<ffffffc00034c61c>] bus_add_driver+0x150/0x208

[    1.688316] <3>.(3)[1:swapper/0][<ffffffc00034db3c>] driver_register+0x70/0x138

[    1.689227] <3>.(3)[1:swapper/0][<ffffffc0006d9cf8>] i2c_register_driver+0x34/0xe8

[    1.689746] <3>.(2)[72:kworker/u8:1][sd]msdc3 Set<300K> src:<200000K> sclk:<299K> timing<0> mode:0 div:167 cfg:0x20a799

[    1.691517] <3>.(3)[1:swapper/0][<ffffffc000e4a074>] rt5514_i2c_driver_init+0x14/0x20

[    1.692491] <3>.(3)[1:swapper/0][<ffffffc0000816cc>] do_one_initcall+0x94/0x1cc

[    1.693403] <3>.(3)[1:swapper/0][<ffffffc000e0bbb0>] kernel_init_freeable+0x148/0x1ec

[    1.694378] <3>.(3)[1:swapper/0][<ffffffc0009fff20>] kernel_init+0x10/0x120

[    1.695245] <3>.(3)[1:swapper/0]---[ end trace 2f8320430276cd98 ]---

[    1.717908] <3>.(3)[1:swapper/0]Codec driver version 0.0.9

[    1.719383] [sd]msdc3 drving<clk 3,cmd 3,dat 3>

[    1.720471] <3>.(3)[1:swapper/0]rt5514_dsp_set_idle_mode(775)dsp idle on

[    1.721776] <3>.(3)[1:swapper/0]mt8173-soc-machine mt8173-soc-machine: mt6397-codec-tx-dai <-> mt-soc-dl1-dai mapping ok

[    1.723253] <3>.(3)[1:swapper/0]mt8173-soc-machine mt8173-soc-machine: mt6397-codec-rx-dai <-> mt-soc-ul1-dai mapping ok

[    1.724689] <3>.(3)[1:swapper/0]mt8173-soc-machine mt8173-soc-machine: snd-soc-dummy-dai <-> mt-audio-hdmi mapping ok

[    1.726122] <3>.(3)[1:swapper/0]mt8173-soc-machine mt8173-soc-machine: snd-soc-dummy-dai <-> mt-soc-btsco-dai mapping ok

[    1.727558] <3>.(3)[1:swapper/0]mt8173-soc-machine mt8173-soc-machine: snd-soc-dummy-dai <-> mt-soc-dl1-awb-dai mapping ok

[    1.729047] <3>.(3)[1:swapper/0]mt8173-soc-machine mt8173-soc-machine: rt5514-aif1 <-> mt-soc-ul2-dai mapping ok

[    1.730416] <3>.(3)[1:swapper/0][sd]msdc3 -> !!! Set<0 Hz>

[    1.730418] <3>.(3)[1:swapper/0]mt8173-soc-machine mt8173-soc-machine: snd-soc-dummy-dai <-> mt-audio-hdmi-raw mapping ok

[    1.731176] <3>.(2)[72:kworker/u8:1][sd]msdc3 drving<clk 3,cmd 3,dat 3>

[    1.731178] <3>.(2)[72:kworker/u8:1][sd]msdc3 -> No power control, host_function<0x2> & Power_domain<0> <- msdc_set_power_mode() : L<2404> PID<kworker/u8:1><0x48>

[    1.735182] <3>.(3)[1:swapper/0]mt8173-soc-machine mt8173-soc-machine: snd-soc-dummy-dai <-> mt-audio-spdif mapping ok

[    1.736593] <3>.(3)[1:swapper/0]mt8173-soc-machine mt8173-soc-machine: snd-soc-dummy-dai <-> mt-soc-i2s0-awb-dai mapping ok

[    1.738061] <3>.(3)[1:swapper/0]mt8173-soc-machine mt8173-soc-machine: mt6397-codec-tx-dai <-> mt-audio-mrgrx mapping ok

[    1.739506] <3>.(3)[1:swapper/0]mt8173-soc-machine mt8173-soc-machine: snd-soc-dummy-dai <-> mt-audio-mrgrx-awb mapping ok

[    1.740963] <3>.(3)[1:swapper/0]mt8173-soc-machine mt8173-soc-machine: mt6397-codec-tx-dai <-> mt-soc-dl2-dai mapping ok

[    1.742359] <3>.(3)[1:swapper/0]mt8173-soc-machine mt8173-soc-machine: snd-soc-dummy-dai <-> snd-soc-dummy-dai mapping ok

[    1.743801] <3>.(3)[1:swapper/0]mt8173-soc-machine mt8173-soc-machine: snd-soc-dummy-dai <-> spi32766.0 mapping ok

[    1.749536] <3>.(3)[1:swapper/0]mt_afe_platform_init invalid pm_domain

[    1.750348] <3>.(3)[1:swapper/0]mt8173_dev_probe mt_afe_platform_init fail -517

[    1.754296] <3>.(3)[1:swapper/0]platform mt8173-soc-machine: Driver mt8173-soc-machine requests probe deferral

[    1.755834] <3>.(3)[1:swapper/0]drop_monitor: Initializing network drop monitor service

[    1.756911] <3>.(3)[1:swapper/0]Mirror/redirect action on

[    1.757601] <3>.(3)[1:swapper/0]u32 classifier

[    1.758146] <3>.(3)[1:swapper/0]    Performance counters on

[    1.758841] <3>.(3)[1:swapper/0]    input device check on

[    1.759540] <3>.(3)[1:swapper/0]    Actions configured

[    1.759758] <3>.(2)[72:kworker/u8:1][sd]msdc3 Set<260K> src:<200000K> sclk:<259K> timing<0> mode:0 div:193 cfg:0x20c199

[    1.761536] <3>.(3)[1:swapper/0]Netfilter messages via NETLINK v0.30.

[    1.762377] <3>.(3)[1:swapper/0]nf_conntrack version 0.5.0 (16384 buckets, 65536 max)

[    1.763648] <3>.(3)[1:swapper/0]ctnetlink v0.93: registering with nfnetlink.

[    1.764968] <3>.(3)[1:swapper/0]xt_time: kernel timezone is -0000

[    1.765832] <3>.(3)[1:swapper/0]ipip: IPv4 over IPv4 tunneling driver

[    1.767201] <3>.(3)[1:swapper/0]ip_tables: (C) 2000-2006 Netfilter Core Team

[    1.768176] <3>.(3)[1:swapper/0]arp_tables: (C) 2002 David S. Miller

[    1.768976] <3>.(3)[1:swapper/0]TCP: cubic registered

[    1.769617] <3>.(3)[1:swapper/0]Initializing XFRM netlink socket

[    1.771644] <3>.(3)[1:swapper/0]mip6: Mobile IPv6

[    1.772253] <3>.(3)[1:swapper/0]ip6_tables: (C) 2000-2006 Netfilter Core Team

[    1.773267] <3>.(3)[1:swapper/0]sit: IPv6 over IPv4 tunneling driver

[    1.774926] <3>.(3)[1:swapper/0]bridge: automatic filtering via arp/ip/ip6tables has been deprecated. Update your scripts to load br_netfilter if you need this.

[    1.776720] <3>.(3)[1:swapper/0]8021q: 802.1Q VLAN Support v1.8

[    1.777859] <3>.(3)[1:swapper/0][cpu_ntf] <00>ffffffc00008469c (fpsimd_cpu_hotplug_notifier)

[    1.778929] <3>.(3)[1:swapper/0]Registered cp15_barrier emulation handler

[    1.780085] <3>.(3)[1:swapper/0]Registered setend emulation handler

[    1.780865] <3>.(3)[1:swapper/0][cpu_ntf] <00>ffffffc000091268 (insn_cpu_hotplug_notify)

[    1.782198] <3>.(3)[1:swapper/0][cpu_ntf] <00>ffffffc0000e7c64 (console_cpu_notify)

[    1.783839] <2>.(2)[131:kworker/u8:4]mtk_mfg_2d_probe

[    1.784522] <2>.(2)[131:kworker/u8:4]mtk_mfg_async_probe0516

[    1.785357] <2>.(2)[131:kworker/u8:4][GPU_DVFS] mt_gpufreq_dvfs_mmpll_spd_bond = 0X6

[    1.786320] <2>.(2)[131:kworker/u8:4]mtk_gpufreq_register

[    1.787390] <0>.(0)[131:kworker/u8:4][MU3D]mu3d_parse_dts: use device tree

[    1.788278] <0>.(0)[131:kworker/u8:4][MU3D]eint number - 116

[    1.788976] <0>.(0)[131:kworker/u8:4][MU3D]drv_mode:3, str_mode:0, num_eps:9, ports:1

[    1.789998] <0>.(0)[131:kworker/u8:4][MU3D]otg-mode:1, init_to_host:0, u3_otg:0, wakeup_src:0

[    1.791057] <0>.(0)[131:kworker/u8:4][MU3D]eint:116, p0_vbus:1, p0_gpio:-1, p1_vbus:0, p1_gpio:-1

[    1.792651] <0>.(0)[131:kworker/u8:4]u3p_project_init phy0 make use of u3_current:0

[    1.794054] [sd]msdc3 drving<clk 3,cmd 3,dat 3>

[    1.804597] <2>.(2)[72:kworker/u8:1][sd]msdc3 -> !!! Set<0 Hz>[    1.805509] <3>.(3)[131:kworker/u8:4]usb_phy_generic.0.auto supply vcc not found, using dummy regulator

[    1.806746] <3>.(3)[131:kworker/u8:4][MU3D]mu3d_hal_clear_intr

[    1.807823] <3>.(3)[131:kworker/u8:4]musb-mtu3d 11270000.usb: MU3D using QMU, IRQ 58

[    1.808842] <3>.(3)[131:kworker/u8:4][MU3D]mtu3d_probe() done!

[    1.809927] <3>.(3)[131:kworker/u8:4][pid=131]larb 0-cnt 1 probe done

[    1.810892] <3>.(3)[131:kworker/u8:4][pid=131]larb 4-cnt 2 probe done

[    1.811859] <3>.(3)[131:kworker/u8:4][pid=131]larb 2-cnt 3 probe done

[    1.812826] <3>.(3)[131:kworker/u8:4][pid=131]larb 1-cnt 4 probe done

[    1.813797] <3>.(3)[131:kworker/u8:4][pid=131]larb 3-cnt 5 probe done

[    1.814765] <3>.(3)[131:kworker/u8:4][pid=131]larb 5-cnt 6 probe done

[    1.815636] <3>.(3)[131:kworker/u8:4][DISP]func|mtkfb_probe

[    1.816324] <3>.(3)[131:kworker/u8:4][MTKFB]mtkfb_probe start

[    1.828742] <3>.(3)[131:kworker/u8:4][DISP]framebuffer va 18446743523973660672, mva 3032219648

[    1.829832] <3>.(3)[131:kworker/u8:4][DISP]func|primary_display_init

[    1.830760] <3>.(3)[131:kworker/u8:4][DDP/ddp_manager]DT|DISPSYS|mmsys, reg base: 0x14000000 --> map:0xffffff8001286000, irq: 4294967232 --> map:0

[    1.832504] <3>.(3)[131:kworker/u8:4][DDP/ddp_manager]DT|DISPSYS|DISP_OVL, reg base: 0x1400c000 --> map:0xffffff8001288000, irq: 180 --> map:70

[    1.834121] <3>.(3)[131:kworker/u8:4][DDP/ddp_manager]DT|DISPSYS|DISP_OVL1, reg base: 0x1400d000 --> map:0xffffff8001289000, irq_mapped:71

[    1.835771] <3>.(3)[131:kworker/u8:4][DDP/ddp_manager]DT|DISPSYS|DISP_RDMA, reg base: 0x1400e000 --> map:0xffffff800128c000, irq: 182 --> map:72

[    1.837398] <3>.(3)[131:kworker/u8:4][DDP/ddp_manager]DT|DISPSYS|DISP_RDMA1, reg base: 0x1400f000 --> map:0xffffff800128d000, irq_mapped:73

[    1.838970] <3>.(3)[131:kworker/u8:4][DDP/ddp_manager]DT|DISPSYS|DISP_RDMA2, reg base: 0x14010000 --> map:0xffffff800128e000, irq_mapped:74

[    1.840644] <3>.(3)[131:kworker/u8:4][DDP/ddp_manager]DT|DISPSYS|DISP_WDMA, reg base: 0x14011000 --> map:0xffffff8001290000, irq: 185 --> map:75

[    1.842271] <3>.(3)[131:kworker/u8:4][DDP/ddp_manager]DT|DISPSYS|DISP_WDMA1, reg base: 0x14012000 --> map:0xffffff8001291000, irq_mapped:76

[    1.843930] <3>.(3)[131:kworker/u8:4][DDP/ddp_manager]DT|DISPSYS|DISP_COLOR, reg base: 0x14013000 --> map:0xffffff8001294000, irq: 187 --> map:77

[    1.845567] <3>.(3)[131:kworker/u8:4][DDP/ddp_manager]DT|DISPSYS|DISP_COLOR1, reg base: 0x14014000 --> map:0xffffff8001295000, irq_mapped:78

[    1.847249] <3>.(3)[131:kworker/u8:4][DDP/ddp_manager]DT|DISPSYS|DISP_AAL, reg base: 0x14015000 --> map:0xffffff8001298000, irq: 189 --> map:79

[    1.848952] <3>.(3)[131:kworker/u8:4][DDP/ddp_manager]DT|DISPSYS|DISP_OD, reg base: 0x14023000 --> map:0xffffff800129a000, irq: 196 --> map:80

[    1.850658] <3>.(3)[131:kworker/u8:4][DDP/ddp_manager]DT|DISPSYS|DISP_GAMMA, reg base: 0x14016000 --> map:0xffffff800129c000, irq: 190 --> map:81

[    1.852371] <3>.(3)[131:kworker/u8:4][DDP/ddp_manager]DT|DISPSYS|DISP_MERGE, reg base: 0x14017000 --> map:0xffffff800129e000, irq: 190 --> map:0

[    1.854073] <3>.(3)[131:kworker/u8:4][DDP/ddp_manager]DT|DISPSYS|DISP_SPLIT, reg base: 0x14018000 --> map:0xffffff80012a0000, irq: 190 --> map:0

[    1.855687] <3>.(3)[131:kworker/u8:4][DDP/ddp_manager]DT|DISPSYS|DISP_SPLIT1, reg base: 0x14019000 --> map:0xffffff80012a1000, irq_mapped:0

[    1.857360] <3>.(3)[131:kworker/u8:4][DDP/ddp_manager]DT|DISPSYS|DISP_UFOE, reg base: 0x1401a000 --> map:0xffffff80012a4000, irq: 190 --> map:0

[    1.859176] <3>.(3)[131:kworker/u8:4][DDP/ddp_manager]DT|DISPSYS|DSI0, reg base: 0x1401b000 --> map:0xffffff80012a6000, irq: 192 --> map:82

[    1.860850] <3>.(3)[131:kworker/u8:4][DDP/ddp_manager]DT|DISPSYS|DSI1, reg base: 0x1401c000 --> map:0xffffff80012a8000, irq: 193 --> map:83

[    1.862514] <3>.(3)[131:kworker/u8:4][DDP/ddp_manager]DT|DISPSYS|DPI0, reg base: 0x1401d000 --> map:0xffffff80012aa000, irq: 194 --> map:84

[    1.864178] <3>.(3)[131:kworker/u8:4][DDP/ddp_manager]DT|DISPSYS|DPI1, reg base: 0x14024000 --> map:0xffffff80012ac000, irq: 197 --> map:85

[    1.865829] <3>.(3)[131:kworker/u8:4][DDP/ddp_manager]DT|DISPSYS|DISP_PWM, reg base: 0x1401e000 --> map:0xffffff80012b0000, irq: 197 --> map:0

[    1.867422] <3>.(3)[131:kworker/u8:4][DDP/ddp_manager]DT|DISPSYS|DISP_PWM1, reg base: 0x1401f000 --> map:0xffffff80012b1000, irq_mapped:0

[    1.869079] <3>.(3)[131:kworker/u8:4][DDP/ddp_manager]DT|DISPSYS|MM_MUTEX, reg base: 0x14020000 --> map:0xffffff80012ae000, irq: 169 --> map:87

[    1.870901] <3>.(3)[131:kworker/u8:4][DDP/ddp_manager]DT|DISPSYS|smi, reg base: 0x14022000 --> map:0xffffff80012b4000, irq: 169 --> map:0

[    1.872819] <3>.(3)[131:kworker/u8:4][DDP/ddp_manager]DT|DISPSYS|MIPITX0, reg base: 0x10215000 --> map:0xffffff80012b6000, irq: 169 --> map:0

[    1.874495] <3>.(3)[131:kworker/u8:4][DDP/ddp_manager]DT|DISPSYS|MIPITX1, reg base: 0x10216000 --> map:0xffffff80012b8000, irq: 169 --> map:0

[    1.876244] <3>.(3)[131:kworker/u8:4][DDP/ddp_manager]DT|DISPSYS|gce, reg base: 0x10212000 --> map:0xffffff80012ba000, irq: 135 --> map:37

[    1.877885] <3>.(3)[131:kworker/u8:4][DDP/ddp_manager]DT|DISPSYS|DISP_IO_DRIVING, reg base: 0x100020f0 --> map:0xffffff80012bc0f0, irq: 135 --> map:0

[    1.879656] <3>.(3)[131:kworker/u8:4][DDP/ddp_manager]DT|DISPSYS|DISP_TVDPLL_CFG6, reg base: 0x100000a0 --> map:0xffffff80012c00a0, irq: 135 --> map:0

[    1.881429] <3>.(3)[131:kworker/u8:4][DDP/ddp_manager]DT|DISPSYS|DISP_TVDPLL_CON0, reg base: 0x1000c270 --> map:0xffffff80012c4270, irq: 135 --> map:0

[    1.883202] <3>.(3)[131:kworker/u8:4][DDP/ddp_manager]DT|DISPSYS|DISP_TVDPLL_CON1, reg base: 0x1000c274 --> map:0xffffff80012c8274, irq: 135 --> map:0

[    1.884987] <3>.(3)[131:kworker/u8:4][DDP/ddp_manager]DT|DISPSYS|LVDSTX0, reg base: 0x10215800 --> map:0xffffff80012cc800, irq: 135 --> map:0

[    1.886662] <3>.(3)[131:kworker/u8:4][DDP/ddp_manager]DT|DISPSYS|LVDSTX1, reg base: 0x10216800 --> map:0xffffff80012ce800, irq: 135 --> map:0

[    1.888376] <3>.(3)[131:kworker/u8:4][DDP/ddp_path]ddp CG100:0x7d7a7ffc CG110:0xfffbffcc

[    1.889795] <3>.(3)[131:kworker/u8:4][DISP]func|disp_lcm_probe

[    1.890522] <3>.(3)[131:kworker/u8:4][LCM-NT51021-WUXGA-DSI-VDO] lcm_get_params (line:751) :

[    1.898549] <3>.(3)[131:kworker/u8:4][DISP]decouple NORMAL buffer : pgc->dc_buf[0] = 0x21100000 dc_vAddr[0] = 0xffffff8003301000

[    1.906999] <3>.(3)[131:kworker/u8:4][DISP]decouple NORMAL buffer : pgc->dc_buf[1] = 0x21a00000 dc_vAddr[1] = 0xffffff8003bcc000

[    1.915381] <3>.(3)[131:kworker/u8:4][DISP]decouple NORMAL buffer : pgc->dc_buf[2] = 0x22300000 dc_vAddr[2] = 0xffffff8004497000

[    1.916823] <3>.(3)[131:kworker/u8:4][DISP]func|_build_path_direct_link

[    1.917660] <3>.(3)[131:kworker/u8:4][DDP/ddp_path]ddp_set_dst_module, scenario=primary_disp, dst_module=dsi0

[    1.918902] <3>.(3)[131:kworker/u8:4][DISP]dpmgr set dst module FINISHED(dsi0 )

[    1.919932] <3>.(3)[131:kworker/u8:4][DISP]primary display is DIRECT LINK MODE

[    1.920857] <3>.(3)[131:kworker/u8:4][DDP/OVL]olv0_init open CG 0x7d7a7ffc

[    1.921853] <3>.(3)[131:kworker/u8:4]color_get_TDSHP_VA: TDSHP VA: 0xffffff80012ea000

[    1.922909] <3>.(3)[131:kworker/u8:4]color_get_TDSHP_VA: TDSHP1 VA: 0xffffff80012ec000

[    1.923895] <3>.(3)[131:kworker/u8:4][DDP/]od_clock on CG 0x7d7a7ffc

[    1.924684] <3>.(3)[131:kworker/u8:4][DDP/RDMA]rdma0_init CG 0x7d7a7ffc

[    1.925508] <3>.(3)[131:kworker/u8:4][DDP/UFOE]ufoe_clock on CG 0x757a7ffc

[    1.926363] <3>.(3)[131:kworker/u8:4][DDP/][PWM] ddp_pwm_power_on: 22

[    1.926363] <3>

[    1.927392] <3>.(3)[131:kworker/u8:4][DISP]func|ddp_dsi_init

[    1.928092] <3>.(3)[131:kworker/u8:4][CMDQ][ERR]unrecognized subsys, msb=0x0000, physAddr:0x00000001

[    1.929230] <3>.(3)[131:kworker/u8:4][CMDQ][ERR]REC: Unsupported memory base address 0x00000001

[    1.930330] <3>.(3)[131:kworker/u8:4][CMDQ][ERR]unrecognized subsys, msb=0x0000, physAddr:0x00000001

[    1.931464] <3>.(3)[131:kworker/u8:4][CMDQ][ERR]REC: Unsupported memory base address 0x00000001

[    1.932552] <3>.(3)[131:kworker/u8:4][DISP]MIPITX for dsi0  is on

[    1.933322] <3>.(3)[131:kworker/u8:4][DDP/DSI]DSI_BackupRegisters VM_CMD_EN 1 TS_VFP_EN 1

[    1.934342] <3>.(3)[131:kworker/u8:4][DDP/ddp_manager]path build cmdq on scenario primary_disp

[    1.935410] <3>.(3)[131:kworker/u8:4][DDP/ddp_manager]ovl0  build cmdq, state=3

[    1.936320] <3>.(3)[131:kworker/u8:4][DDP/ddp_manager]color0  build cmdq, state=3

[    1.937253] <3>.(3)[131:kworker/u8:4][DDP/ddp_manager]dsi0  build cmdq, state=3

[    1.938165] <3>.(3)[131:kworker/u8:4][CMDQ][LOG]======REC 0xffffffc07060e000 command buffer:

[    1.939222] <3>.(3)[131:kworker/u8:4]ffffffc07060e000: fffffffe 02000000 00000001 04086b0d

[    1.940259] <3>.(3)[131:kworker/u8:4]ffffffc07060e010: 80008001 20000035 00000004 0142374c

[    1.941284] <3>.(3)[131:kworker/u8:4][CMDQ][LOG]======REC 0xffffffc07060e000 command buffer END

[    1.942368] <3>.(3)[131:kworker/u8:4][CMDQ][LOG]REC 0xffffffc07060e000 command buffer TRANSLATED:

[    1.943476] <3>.(3)[131:kworker/u8:4][CMDQ][LOG]MASK: 0xfffffffe

[    1.944227] <3>.(3)[131:kworker/u8:4][CMDQ][LOG]WRIT: 0x00000001, addr=0x10006b0c [INFRA_AO],use_mask=1

[    1.945396] <3>.(3)[131:kworker/u8:4][CMDQ][LOG]WFE: CMDQ_EVENT_MUTEX0_STREAM_EOF

[    1.946329] <3>.(3)[131:kworker/u8:4][CMDQ][LOG]READ: R4, addr=0x1401374c [DISP_COLOR0],use_mask=0

[    1.947444] <3>.(3)[131:kworker/u8:4][CMDQ][LOG]======REC 0xffffffc07060e000 command END

[    1.948521] <3>.(3)[131:kworker/u8:4][DDP/][GAMMA] disp_gamma_write_lut_reg: gamma table [0] not initialized

[    1.949752] <3>.(3)[131:kworker/u8:4][DDP/][GAMMA] disp_ccorr_write_coef_reg: [0] not initialized

[    1.950854] <3>.(3)[131:kworker/u8:4][DDP/]ddp_bypass_od

[    1.951526] <3>.(3)[131:kworker/u8:4][DISP]func|ddp_dsi_config

[    1.952247] <3>.(3)[131:kworker/u8:4][DISP]MIPITX for dsi0  is on

[    1.958639] <3>.(3)[131:kworker/u8:4][DISP]func|disp_lcm_init

[    1.959365] <3>.(3)[131:kworker/u8:4][LCM-NT51021-WUXGA-DSI-VDO] lcm_init (line:853) :board_type:0x28, rev:0x40

[    1.960646] <3>.(3)[131:kworker/u8:4][LCM-NT51021-WUXGA-DSI-VDO] lcm_init (line:867) :Skip power_on & init lcm since it's done by lk

[    1.962218] <3>.(3)[131:kworker/u8:4][LCM-NT51021-WUXGA-DSI-VDO] lcm_init (line:882) :cmd_sel = 0x0

[    1.963593] <3>.(3)[131:kworker/u8:4][DISP]SODI enabled!

[    1.964876] <3>.(3)[131:kworker/u8:4][DISP]primary_display_init end

[    1.965655] <3>.(3)[131:kworker/u8:4][DISP]MTK_FB_XRES=1200, MTKFB_YRES=1920, MTKFB_BPP=32, MTK_FB_PAGES=3, MTKFB_LINE=4864, MTKFB_SIZEV=28016640

[    1.967282] <3>.(3)[131:kworker/u8:4][DISP][FB Driver] fbdev->fb_pa_base = 0x00000000b4bc0000, fbdev->fb_va_base = 0xffffff8001300000

[    1.968798] <3>.(3)[131:kworker/u8:4][DISP]DAL_Init, layerVA=0xffffff8002db8000, layerPA=0xb6678000

[    1.975212] <2>.(2)[140:present_fence_w][DISP]not found session info for session_id:0x00010000,insert 0x01026830 to array index:0

[    1.976679] <2>.(2)[140:present_fence_w][DISP]create timeline success: timeline-primary-0-0=0xffffffc070489300, layer_info=0xffffffc001026838

[    1.978272] <3>.(2)[140:present_fence_w][DISP]create timeline success: timeline-primary-0-1=0xffffffc070489280, layer_info=0xffffffc0010268f0

[    1.978280] <3>.(2)[140:present_fence_w][DISP]create timeline success: timeline-primary-0-2=0xffffffc070489200, layer_info=0xffffffc0010269a8

[    1.978286] <3>.(2)[140:present_fence_w][DISP]create timeline success: timeline-primary-0-3=0xffffffc070489180, layer_info=0xffffffc001026a60

[    1.978292] <3>.(2)[140:present_fence_w][DISP]create timeline success: timeline-primary-0-4=0xffffffc070489100, layer_info=0xffffffc001026b18

[    1.978299] <3>.(2)[140:present_fence_w][DISP]create timeline success: timeline-primary-0-5=0xffffffc070eddf00, layer_info=0xffffffc001026bd0

[    1.978305] <3>.(2)[140:present_fence_w][DISP]create timeline success: timeline-primary-0-6=0xffffffc070eddf80, layer_info=0xffffffc001026c88

[    1.987777] <3>.(3)[131:kworker/u8:4][MTKFB]mtkfb_probe done

[    1.988809] <3>.(3)[131:kworker/u8:4][kd_sensorlist][CAMERA_HW_probe] == MTKCAM_USING_PWRREG : Main ==

[    1.990047] <3>.(3)[131:kworker/u8:4]15008000.camera1 supply reg-vcamd not found, using dummy regulator

[    1.991292] <3>.(3)[131:kworker/u8:4]15008000.camera1 supply reg-vcamaf not found, using dummy regulator

[    1.992500] <3>.(3)[131:kworker/u8:4][kd_sensorlist][CAMERA_HW_probe] == MTKCAM_USING_CCF ==

[    1.993568] <3>.(3)[131:kworker/u8:4][kd_sensorlist][CAMERA_HW_probe] == MTKCAM_USING_DTGPIO : Main ==

[    1.994729] <3>.(3)[131:kworker/u8:4][kd_sensorlist][mtkcam_gpio_init]cam_gpio[0]: "cam-1-gpio-rst"(904)

[    1.995921] <3>.(3)[131:kworker/u8:4][kd_sensorlist][mtkcam_gpio_init]cam_gpio[1]: "cam-1-gpio-pdn"(873)

[    1.997108] <3>.(3)[131:kworker/u8:4][kd_sensorlist][mtkcam_gpio_init]cam_gpio[2]: "cam-1-gpio-ldo"(889)

[    1.998293] <3>.(3)[131:kworker/u8:4][kd_sensorlist][mtkcam_gpio_init]cam_gpio[3]: "cam-1-gpio-id"(900)

[    1.999492] <3>.(3)[131:kworker/u8:4]T_flash seitch create successfully!!	CAMERA_HW_probe:3690

[    2.000618] <3>.(3)[131:kworker/u8:4][kd_sensorlist][CAMERA_HW_i2c_probe][CAMERA_HW] Attach I2C

[    2.001699] <3>.(3)[131:kworker/u8:4][kd_sensorlist][CAMERA_HW_i2c_probe][CAMERA_HW] I2C bus 3

[    2.002860] <3>.(3)[131:kworker/u8:4][kd_sensorlist][CAMERA_HW_i2c_probe][CAMERA_HW] Attached!!

[    2.004138] <3>.(3)[131:kworker/u8:4][kd_sensorlist][CAMERA_HW_probe2] == MTKCAM_USING_PWRREG : Sub ==

[    2.005339] <3>.(3)[131:kworker/u8:4]15008000.camera2 supply reg-vcamd not found, using dummy regulator

[    2.006576] <3>.(3)[131:kworker/u8:4]15008000.camera2 supply reg-vcamaf not found, using dummy regulator

[    2.007796] <3>.(3)[131:kworker/u8:4][kd_sensorlist][CAMERA_HW_probe2] == MTKCAM_USING_DTGPIO : Sub ==

[    2.008954] <3>.(3)[131:kworker/u8:4][kd_sensorlist][mtkcam_gpio_init] Warning:cam_gpio[0]: "cam-2-gpio-rst"(-2) is non-used !!

[    2.010404] <3>.(3)[131:kworker/u8:4][kd_sensorlist][mtkcam_gpio_init]cam_gpio[1]: "cam-2-gpio-pdn"(868)

[    2.011588] <3>.(3)[131:kworker/u8:4][kd_sensorlist][mtkcam_gpio_init] Warning:cam_gpio[2]: "cam-2-gpio-ldo"(-2) is non-used !!

[    2.013019] <3>.(3)[131:kworker/u8:4][kd_sensorlist][mtkcam_gpio_init]cam_gpio[3]: "cam-2-gpio-id"(901)

[    2.014236] <3>.(3)[131:kworker/u8:4][kd_sensorlist][CAMERA_HW_i2c_probe2][CAMERA_HW] Attach I2C0

[    2.015339] <3>.(3)[131:kworker/u8:4][kd_sensorlist][CAMERA_HW_i2c_probe2][CAMERA_HW] I2C bus 0

[    2.016504] <3>.(3)[131:kworker/u8:4][kd_sensorlist][CAMERA_HW_i2c_probe2][CAMERA_HW] Attached!!

[    2.018025] <3>.(3)[131:kworker/u8:4][WMT-DETECT][E]wmt_detect_probe(244):platform name: mediatek,connectivity-combo

[    2.019790] <3>.(3)[131:kworker/u8:4]wmt_gpio: gpio init start!

[    2.020534] <3>.(3)[131:kworker/u8:4]wmt_gpio:set GPIO_COMBO_PMU_EN_PIN out to 0: 0!

[    2.021499] <3>.(3)[131:kworker/u8:4]wmt_gpio:set GPIO_COMBO_RST_PIN out to 0: 0!

[    2.022432] <3>.(3)[131:kworker/u8:4]mediatek-mt8173-pinctrl 1000b000.pinctrl: pin EINT2 already requested by 1000b000.pinctrl; cannot claim for mediatek,connectivity-combo

[    2.024351] <3>.(3)[131:kworker/u8:4]mediatek-mt8173-pinctrl 1000b000.pinctrl: pin-2 (mediatek,connectivity-combo) status -22

[    2.025760] <3>.(3)[131:kworker/u8:4]mediatek-mt8173-pinctrl 1000b000.pinctrl: could not request pin 2 (EINT2) from group EINT2  on device 1000b000.pinctrl

[    2.027496] <3>.(3)[131:kworker/u8:4]mediatek,connectivity-combo mediatek,connectivity-combo: Error applying setting, reverse things back

[    2.029032] <3>.(3)[131:kworker/u8:4]wmt_gpio:set GPIO_WIFI_EINT_PIN to GPIO_IN_PULLUP done!

[    2.030098] <3>.(3)[131:kworker/u8:4]mediatek-mt8173-pinctrl 1000b000.pinctrl: pin DAICLK already requested by 1000b000.pinctrl; cannot claim for mediatek,connectivity-combo

[    2.032027] <3>.(3)[131:kworker/u8:4]mediatek-mt8173-pinctrl 1000b000.pinctrl: pin-33 (mediatek,connectivity-combo) status -22

[    2.033447] <3>.(3)[131:kworker/u8:4]mediatek-mt8173-pinctrl 1000b000.pinctrl: could not request pin 33 (DAICLK) from group DAICLK  on device 1000b000.pinctrl

[    2.035215] <3>.(3)[131:kworker/u8:4]mediatek,connectivity-combo mediatek,connectivity-combo: Error applying setting, reverse things back

[    2.036752] <3>.(3)[131:kworker/u8:4]wmt_gpio:set GPIO_PCM_DAICLK_PIN to GPIO_PULL_DIS done!

[    2.037806] <3>.(3)[131:kworker/u8:4]mediatek-mt8173-pinctrl 1000b000.pinctrl: pin DAIPCMIN already requested by 1000b000.pinctrl; cannot claim for mediatek,connectivity-combo

[    2.039768] <3>.(3)[131:kworker/u8:4]mediatek-mt8173-pinctrl 1000b000.pinctrl: pin-34 (mediatek,connectivity-combo) status -22

[    2.041187] <3>.(3)[131:kworker/u8:4]mediatek-mt8173-pinctrl 1000b000.pinctrl: could not request pin 34 (DAIPCMIN) from group DAIPCMIN  on device 1000b000.pinctrl

[    2.042998] <3>.(3)[131:kworker/u8:4]mediatek,connectivity-combo mediatek,connectivity-combo: Error applying setting, reverse things back

[    2.044536] <3>.(3)[131:kworker/u8:4]wmt_gpio:set GPIO_PCM_DAIPCMIN_PIN to GPIO_PULL_DIS done!

[    2.045611] <3>.(3)[131:kworker/u8:4]mediatek-mt8173-pinctrl 1000b000.pinctrl: pin DAIPCMOUT already requested by 1000b000.pinctrl; cannot claim for mediatek,connectivity-combo

[    2.047576] <3>.(3)[131:kworker/u8:4]mediatek-mt8173-pinctrl 1000b000.pinctrl: pin-35 (mediatek,connectivity-combo) status -22

[    2.048996] <3>.(3)[131:kworker/u8:4]mediatek-mt8173-pinctrl 1000b000.pinctrl: could not request pin 35 (DAIPCMOUT) from group DAIPCMOUT  on device 1000b000.pinctrl

[    2.050839] <3>.(3)[131:kworker/u8:4]mediatek,connectivity-combo mediatek,connectivity-combo: Error applying setting, reverse things back

[    2.052374] <3>.(3)[131:kworker/u8:4]wmt_gpio:set GPIO_PCM_DAIPCMOUT_PIN to GPIO_PULL_DIS done!

[    2.053460] <3>.(3)[131:kworker/u8:4]mediatek-mt8173-pinctrl 1000b000.pinctrl: pin DAISYNC already requested by 1000b000.pinctrl; cannot claim for mediatek,connectivity-combo

[    2.055403] <3>.(3)[131:kworker/u8:4]mediatek-mt8173-pinctrl 1000b000.pinctrl: pin-36 (mediatek,connectivity-combo) status -22

[    2.056835] <3>.(3)[131:kworker/u8:4]mediatek-mt8173-pinctrl 1000b000.pinctrl: could not request pin 36 (DAISYNC) from group DAISYNC  on device 1000b000.pinctrl

[    2.058622] <3>.(3)[131:kworker/u8:4]mediatek,connectivity-combo mediatek,connectivity-combo: Error applying setting, reverse things back

[    2.060169] <3>.(3)[131:kworker/u8:4]wmt_gpio:set GPIO_PCM_DAISYNC_PIN to GPIO_PULL_DIS done!

[    2.061225] <3>.(3)[131:kworker/u8:4]wmt_gpio: gpio init done!

[    2.079653] <3>.(3)[131:kworker/u8:4]Codec driver version 0.0.9

[    2.080389] <3>.(3)[131:kworker/u8:4]rt5514_dsp_set_idle_mode IdleMode is the same with previous one1

[    2.081976] <3>.(3)[131:kworker/u8:4]mt8173-soc-machine mt8173-soc-machine: mt6397-codec-tx-dai <-> mt-soc-dl1-dai mapping ok

[    2.083534] <3>.(3)[131:kworker/u8:4]mt8173-soc-machine mt8173-soc-machine: mt6397-codec-rx-dai <-> mt-soc-ul1-dai mapping ok

[    2.085027] <3>.(3)[131:kworker/u8:4]mt8173-soc-machine mt8173-soc-machine: snd-soc-dummy-dai <-> mt-audio-hdmi mapping ok

[    2.086513] <3>.(3)[131:kworker/u8:4]mt8173-soc-machine mt8173-soc-machine: snd-soc-dummy-dai <-> mt-soc-btsco-dai mapping ok

[    2.088002] <3>.(3)[131:kworker/u8:4]mt8173-soc-machine mt8173-soc-machine: snd-soc-dummy-dai <-> mt-soc-dl1-awb-dai mapping ok

[    2.089558] <3>.(3)[131:kworker/u8:4]mt8173-soc-machine mt8173-soc-machine: rt5514-aif1 <-> mt-soc-ul2-dai mapping ok

[    2.090962] <3>.(3)[131:kworker/u8:4]mt8173-soc-machine mt8173-soc-machine: snd-soc-dummy-dai <-> mt-audio-hdmi-raw mapping ok

[    2.092460] <3>.(3)[131:kworker/u8:4]mt8173-soc-machine mt8173-soc-machine: snd-soc-dummy-dai <-> mt-audio-spdif mapping ok

[    2.093924] <3>.(3)[131:kworker/u8:4]mt8173-soc-machine mt8173-soc-machine: snd-soc-dummy-dai <-> mt-soc-i2s0-awb-dai mapping ok

[    2.095445] <3>.(3)[131:kworker/u8:4]mt8173-soc-machine mt8173-soc-machine: mt6397-codec-tx-dai <-> mt-audio-mrgrx mapping ok

[    2.096938] <3>.(3)[131:kworker/u8:4]mt8173-soc-machine mt8173-soc-machine: snd-soc-dummy-dai <-> mt-audio-mrgrx-awb mapping ok

[    2.098448] <3>.(3)[131:kworker/u8:4]mt8173-soc-machine mt8173-soc-machine: mt6397-codec-tx-dai <-> mt-soc-dl2-dai mapping ok

[    2.099910] <3>.(3)[131:kworker/u8:4]mt8173-soc-machine mt8173-soc-machine: snd-soc-dummy-dai <-> snd-soc-dummy-dai mapping ok

[    2.101408] <3>.(3)[131:kworker/u8:4]mt8173-soc-machine mt8173-soc-machine: snd-soc-dummy-dai <-> spi32766.0 mapping ok

[    2.106693] <2>.(2)[1:swapper/0][Power/cpufreq] [ERROR]apmixed_base = 0xffffff8004d6e000

[    2.107725] <2>.(2)[1:swapper/0][Power/cpufreq] [ERROR]infracfg_ao_base = 0xffffff8004d7a000

[    2.108774] <2>.(2)[1:swapper/0][Power/cpufreq] [ERROR]@_mt_cpufreq_pdrv_init():6108, chip_ver = 1, little.cpu_id = 0, big.cpu_id = 2

[    2.110980] <2>.(2)[40:kworker/2:1]mfg: Power-off latency exceeded, new value 16077 ns

[    2.111977] <2>.(2)[40:kworker/2:1]mfg_2d: Power-off latency exceeded, new value 7692 ns

[    2.112404] <2>.(0)[1:swapper/0][cpu_ntf] <00>ffffffc00073bab0 (cpufreq_cpu_callback)

[    2.112420] <2>.(0)[1:swapper/0][cpu_ntf] <00>ffffffc00037ad90 (turbo_mode_cpu_callback)

[    2.112429] <2>.(0)[1:swapper/0][cpu_ntf] <00>ffffffc0003751d4 (extbuck_cpu_callback)

[    2.113421] <2>.(0)[1:swapper/0]MPLL_FOUT=1599999756, MEMPLL_FBKDIV=6, MEMPLL_FOUT=1600

[    2.113426] <2>.(0)[1:swapper/0][VcoreFS] get_ddr_khz[421], VCoreDVFS, dram_data_rate = 1600000

[    2.113433] <2>.(0)[1:swapper/0][VcoreFS] init_vcorefs_pwrctrl[1229], OPP 0: vcore_val = 0x3f, ddr_khz = 1600000, axi_khz = 208000

[    2.113438] <2>.(0)[1:swapper/0][VcoreFS] init_vcorefs_pwrctrl[1229], OPP 1: vcore_val = 0x30, ddr_khz = 1600000, axi_khz = 208000

[    2.114362] <2>.(0)[1:swapper/0]platform 1100b000.ptp_od: Driver mt-ptp requests probe deferral

[    2.114676] <2>.(0)[1:swapper/0][cpu_ntf] <00>ffffffc00039186c (cpu_hotplug_handler)

[    2.114697] <2>.(0)[1:swapper/0][M4U]MTK_M4U_lateinit

[    2.114778] <2>.(0)[1:swapper/0]<HWMSEN> hwmsen_init

[    2.114781] <2>.(0)[1:swapper/0]<HWMSEN> hwmsen_probe

[    2.114787] <2>.(0)[1:swapper/0]<HWMSEN> hwmsen_alloc_object

[    2.115192] <2>.(3)[1:swapper/0]input: hwmdata as /devices/virtual/input/input3

[    2.115332] <2>.(3)[1:swapper/0]<HWMSEN> hwmsen_create_attr

[    2.115368] <2>.(3)[1:swapper/0]<BATCHDEV> batch_probe 1051 : batch real driver init fail

[    2.115373] <2>.(3)[1:swapper/0]<BATCHDEV> batch_init 1130 : failed to register batch driver

[    2.115380] <2>.(3)[1:swapper/0]<ALS/PS> alsps_init

[    2.115383] <2>.(3)[1:swapper/0]<ALS/PS> +++++++++++++alsps_probe!!

[    2.115387] <2>.(3)[1:swapper/0]<ALS/PS> alsps_context_alloc_object++++

[    2.115390] <2>.(3)[1:swapper/0]<ALS/PS> alsps_context_alloc_object----

[    2.115393] <2>.(3)[1:swapper/0]<ALS/PS>  alsps_real_driver_init +

[    2.115396] <2>.(3)[1:swapper/0]<ALS/PS> alsps_real_driver_init i=0

[    2.115400] <2>.(3)[1:swapper/0]<ALS/PS>  alsps try to init driver stk3x1x

[    2.115468] <2>.(3)[1:swapper/0][ALS/PS] stk3x1x_i2c_probe: driver version: 3.1.2.1nk

[    2.115472] <2>.(3)[1:swapper/0][ALS/PS] stk3x1x_i2c_probe: enable PS interrupt

[    2.115478] <2>.(3)[1:swapper/0][ALS/PS] stk3x1x_i2c_probe: state_val=0x0, psctrl_val=0x71, alsctrl_val=0x39, ledctrl_val=0xff, wait_val=0x9, int_val=0x1

[    2.115481] <2>.(3)[1:swapper/0][ALS/PS] stk3x1x_i2c_probe() OK!

[    2.115561] <2>.(0)[1:swapper/0]i2c-mt65xx 11011000.i2c: addr: 48, transfer ACK error

[    2.115629] <2>.(0)[1:swapper/0]<HWMSEN> hwmsen_write_block 211 : send command error!!

[    2.115789] <2>.(0)[1:swapper/0]i2c-mt65xx 11011000.i2c: addr: 48, transfer ACK error

[    2.115851] <2>.(0)[1:swapper/0]<HWMSEN> hwmsen_write_block 211 : send command error!!

[    2.116008] <2>.(0)[1:swapper/0]i2c-mt65xx 11011000.i2c: addr: 48, transfer ACK error

[    2.116070] <2>.(0)[1:swapper/0]<HWMSEN> hwmsen_write_block 211 : send command error!!

[    2.116175] <2>.(0)[1:swapper/0][ALS/PS] stk3x1x_write_sw_reset 768 : i2c write test error = -14

[    2.116186] <2>.(0)[1:swapper/0][ALS/PS] stk3x1x_init_client 1439 : software reset error, err=-14[ALS/PS] stk3x1x_i2c_probe 4084 : stk3x1x_i2c_probe: err = -14

[    2.116204] <2>.(0)[1:swapper/0]stk3x1x: probe of 11-0048 failed with error -14

[    2.116240] <2>.(0)[1:swapper/0]i2c-core: driver [stk3x1x] using legacy suspend method

[    2.116244] <2>.(0)[1:swapper/0]i2c-core: driver [stk3x1x] using legacy resume method

[    2.116260] <2>.(0)[1:swapper/0]<ALS/PS> alsps_real_driver_init i=1

[    2.116264] <2>.(0)[1:swapper/0]<ALS/PS>  alsps try to init driver ltr559

[    2.116268] <2>.(0)[1:swapper/0][ALS/PS] ltr559_local_init

[    2.116350] <2>.(0)[1:swapper/0][ALS/PS] ltr559_i2c_probe

[    2.116355] <2>.(0)[1:swapper/0][ALS/PS] ltr559_init_client() start...!

[    2.154550] <2>.(2)[40:kworker/2:1]mfg_async: Power-off latency exceeded, new value 22923 ns

[    2.155606] <2>.(2)[40:kworker/2:1]venc_lt: Power-off latency exceeded, new value 10692 ns

[    2.156636] <2>.(2)[40:kworker/2:1]isp: Power-off latency exceeded, new value 7692 ns

[    2.157618] <2>.(2)[40:kworker/2:1]venc: Power-off latency exceeded, new value 14923 ns

[    2.158612] <2>.(2)[40:kworker/2:1]vdec: Power-off latency exceeded, new value 7461 ns

[    2.716373] <3>.(3)[1:swapper/0][ALS/PS] LTR559_PS setgain = 8!

[    2.717398] [ALS/PS] eint enable

[    2.717959] <3>.(3)[1:swapper/0][ALS/PS] ltr559_init_client 1914 : ALS sensor gainrange 48!

[    2.719253] <3>.(3)[1:swapper/0][ALS/PS] ALS(1): enable als only

[    2.730107] <3>.(3)[1:swapper/0][ALS/PS] ltr559_check_and_clear_intr

[    2.731035] <3>.(3)[1:swapper/0][ALS/PS] ltr559_init_client() OK!

[    2.731886] <3>.(3)[1:swapper/0]<ALS/PS> alsps register data path vender_div: 100

[    2.732807] <3>.(3)[1:swapper/0][ALS/PS] ltr559_i2c_probe: OK

[    2.733545] <3>.(3)[1:swapper/0]i2c-core: driver [ltr559] using legacy suspend method

[    2.733669] <3>.(2)[131:kworker/u8:4]platform 1100b000.ptp_od: Driver mt-ptp requests probe deferral

[    2.735648] <3>.(3)[1:swapper/0]i2c-core: driver [ltr559] using legacy resume method

[    2.736618] <3>.(3)[1:swapper/0]idme_get_alscal_value enter

[    2.737312] <3>.(3)[1:swapper/0]alscal 1C250000

[    2.737872] <3>.(3)[1:swapper/0]retdata 1c, 25, 00, 00

[    2.738511] <3>.(3)[1:swapper/0]alscal_value 9500

[    2.739096] <3>.(3)[1:swapper/0]idme_get_alscal_value exit

[    2.739788] <3>.(3)[1:swapper/0]<ALS/PS>  alsps real driver ltr559 probe ok

[    2.740648] <3>.(3)[1:swapper/0]<ALS/PS> Node of '/dev/als_ps' has already existed!

[    2.741603] <3>.(3)[1:swapper/0]<ALS/PS> alsps_probe 1124 : alsps factory device already registed

[    2.742774] <3>.(3)[1:swapper/0]input: m_alsps_input as /devices/virtual/input/input4

[    2.743772] <3>.(3)[1:swapper/0]<ALS/PS> ----alsps_probe OK !!

[    2.744753] <2>.(2)[131:kworker/u8:4]platform 1100b000.ptp_od: Driver mt-ptp requests probe deferral

[    2.745947] <3>.(3)[1:swapper/0][Gsensor] gsensor_local_init

[    2.746670] <3>.(3)[1:swapper/0][Gsensor] bma253_i2c_probe

[    2.747341] <3>.(3)[1:swapper/0][Gsensor] bma253_init_client

[    2.748180] [Gsensor] BMA253_CheckDeviceID 250 done!

 [Gsensor] set power mode value = 0x0!

[    2.759082] <3>.(3)[1:swapper/0][Gsensor] bma253_init_client OK!

[    2.759826] <3>.(3)[1:swapper/0][Gsensor] bma253_init_client

[    2.760648] [Gsensor] BMA253_CheckDeviceID 250 done!

 [Gsensor] Sensor power status is newest!

[    2.769342] <3>.(3)[1:swapper/0][Gsensor] bma253_init_client OK!

[    2.770100] <3>.(3)[1:swapper/0][Gsensor] bma253_init_client

[    2.770921] [Gsensor] BMA253_CheckDeviceID 250 done!

 [Gsensor] Sensor power status is newest!

[    2.779621] <3>.(3)[1:swapper/0][Gsensor] bma253_init_client OK!

[    2.780451] <3>.(3)[1:swapper/0][Gsensor] bma253_i2c_probe: OK

[    2.781187] <3>.(3)[1:swapper/0]i2c-core: driver [BMA253] using legacy suspend method

[    2.781255] <3>.(2)[131:kworker/u8:4]platform 1100b000.ptp_od: Driver mt-ptp requests probe deferral

[    2.783290] <3>.(3)[1:swapper/0]i2c-core: driver [BMA253] using legacy resume method

[    2.784258] <3>.(3)[1:swapper/0]idme_get_sensorcal enter

[    2.784920] <3>.(3)[1:swapper/0]sensorcal 109

[    2.784920] <3>2

[    2.784920] <3>-18

[    2.784920] <3>

[    2.786156] <3>.(3)[1:swapper/0]idme_get_sensorcal exit

[    2.786803] <3>.(3)[1:swapper/0]gsensor_cal 109

[    2.786803] <3>2

[    2.786803] <3>-18

[    2.786803] <3>

[    2.788065] <3>.(3)[1:swapper/0]gsensor_cal x 109

[    2.788647] <3>.(3)[1:swapper/0]gsensor_cal y 2

[    2.789211] <3>.(3)[1:swapper/0]gsensor_cal z -18

[    2.789211] <3>

[    2.790025] <3>.(3)[1:swapper/0][Gsensor] OLDOFF: ( +0  +0  +0): ( +0  +0  +0) / ( +0  +0  +0)

[    2.791088] <3>.(3)[1:swapper/0][Gsensor] UPDATE: (+109  +2 -18)

[    2.792836] <3>.(3)[1:swapper/0]<ACCELEROMETER> acc factory device already registed

[    2.793846] <3>.(3)[1:swapper/0]input: m_acc_input as /devices/virtual/input/input5

[    2.794836] <3>-(3)[1:swapper/0]mtk_rtc_hal_common: RTC_IRQ_EN = 0x8, RTC_PDN1 = 0x200

[    2.795812] <3>-(3)[1:swapper/0]mtk_rtc_hal_common: rtc_spare_reg[12] = {57392, 1, 6}

[    2.796791] <3>.(3)[1:swapper/0]mtk_rtc_common: There is Crystal

[    2.797663] <3>.(3)[1:swapper/0][CMDQ][LOG]begin to init secure path

[    2.798442] <3>.(3)[1:swapper/0][CMDQ][LOG]cmdq_sec_create_shared_memory

[    2.799282] <3>.(3)[1:swapper/0][CMDQ][LOG]TZ_TA_CMDQ_UUID:5c071864-505d-11e4-9e35-164230d1df67

[    2.800415] <3>.(3)[1:swapper/0][CMDQ_TZ][LOG]init share memory

[    2.801147] <3>.(3)[1:swapper/0][CMDQ_TZ][LOG]cmdq_tz_init_shared_memory :param[0].mem.buffer=0xffffffc07060f000

[    2.802415] <3>.(3)[1:swapper/0][CMDQ_TZ][LOG]set CMDQ_SHARED_THR_COOKIE_REGION:0xffffffc07060f000

[    2.803531] <3>.(3)[1:swapper/0][CMDQ][LOG]init secure path done

[    2.804279] <3>.(3)[1:swapper/0][LCM-NT51021-WUXGA-DSI-VDO] lcm_init (line:181) :Register panel driver for nt51021_wuxga_dsi_vdo

[    2.805939] <3>.(3)[1:swapper/0][LCM-NT51021-WUXGA-DSI-VDO] lcm_get_vgp_supply (line:43) :Get supply ok

[    2.807128] <3>.(3)[1:swapper/0][LCM-NT51021-WUXGA-DSI-VDO] lcm_get_vgp_supply (line:46) :lcm LDO voltage = 3300000uV in LK stage

[    2.808594] <3>.(3)[1:swapper/0][LCM-NT51021-WUXGA-DSI-VDO] lcm_vgp_supply_enable (line:71) :Check regulator voltage=3300000 pass!

[    2.810072] <3>.(3)[1:swapper/0][LCM-NT51021-WUXGA-DSI-VDO] lcm_vgp_supply_enable (line:80) :Succeed to enable lcm_vgp: 0

[    2.811566] <2>.(2)[131:kworker/u8:4]platform 1100b000.ptp_od: Driver mt-ptp requests probe deferral

[    2.811588] <2>.(3)[1:swapper/0][pid=1]smi_init_late-

[    2.811608] <2>.(3)[1:swapper/0]vdec: Power-on latency exceeded, new value 7923 ns

[    2.811656] <2>.(3)[1:swapper/0]isp: Power-on latency exceeded, new value 7539 ns

[    2.811674] <2>.(3)[1:swapper/0]venc: Power-on latency exceeded, new value 9461 ns

[    2.811693] <2>.(3)[1:swapper/0]venc_lt: Power-on latency exceeded, new value 9153 ns

[    2.811700] <2>.(3)[1:swapper/0][pid=1]Save default config:

[    2.811704] <2>.(3)[1:swapper/0][pid=1]l1arb[0-2]= 0x0,  0x0, 0x0

[    2.811706] <2>.(3)[1:swapper/0][pid=1]l1arb[3-4]= 0x0,  0x0 0x0

[    2.811836] <2>.(3)[1:swapper/0]PVR: PVRCore_Init

[    2.819999] <3>.(3)[1:swapper/0]PVR: PVRCore_Init: major device 238

[    2.821002] <3>.(3)[1:swapper/0]PVR: PVRSRVSystemInit (pDevice=ffffffc0203fa400)

[    2.822645] <3>.(3)[1:swapper/0]PVR_K:(Error): 1: RGXRegisterDevice : MTKcxd add alloc memory for DEVMEM_HEAP_BLUEPRINT [1674, rgxinit.c]

[    2.824482] <2>.(2)[131:kworker/u8:4]platform 1100b000.ptp_od: Driver mt-ptp requests probe deferral

[    2.826057] <3>.(3)[1:swapper/0][g_android]file system registered

[    2.826454] <3>.(0)[131:kworker/u8:4][Power/cpufreq] [ERROR]@set_cur_volt_little():1972, mv = 960

[    2.826517] <3>.(0)[131:kworker/u8:4][Power/cpufreq] [ERROR]@set_cur_volt_little():1972, mv = 1000

[    2.826535] <3>.(0)[131:kworker/u8:4]regulator regulator.1: mt6397 buck set_mode 0x218, 0x800, 0xb, 0x1

[    2.829319] <3>.(0)[131:kworker/u8:4][Power/cpufreq] [ERROR]@set_cur_volt_big():2030, mv = 867

[    2.832853] <3>.(3)[1:swapper/0]android_usb gadget: Mass Storage Function, version: 2009/09/11

[    2.832860] <3>.(0)[131:kworker/u8:4][Power/cpufreq] [ERROR]@set_cur_volt_big():2030, mv = 1000

[    2.832870] <3>.(0)[131:kworker/u8:4][Power/cpufreq] [ERROR]vpca57 should be REGULATOR_MODE_FAST(1), but mode = -22

[    2.833175] <3>.(0)[131:kworker/u8:4]mfg_async: Power-on latency exceeded, new value 286462 ns

[    2.833198] <3>.(0)[131:kworker/u8:4]mfg_2d: Power-on latency exceeded, new value 7000 ns

[    2.833228] <3>.(0)[131:kworker/u8:4]mfg: Power-on latency exceeded, new value 16307 ns

[    2.833256] <3>.(0)[131:kworker/u8:4]regulator regulator.6: mt6397 buck set_mode 0x290, 0x100, 0x8, 0x1

[    2.835627] <3>.(2)[154:PTP_CTRL_LITTLE][Power/cpufreq] [ERROR]@set_cur_volt_little():1972, mv = 837

[    2.836573] <3>.(2)[156:PTP_CTRL_GPU]vgpu: unsupportable voltage range: 700000-9999uV

[    2.836579] <3>.(2)[156:PTP_CTRL_GPU][GPU_DVFS] mt_gpu_volt_switch: fail to set voltage 0xFFFFFFEA (1000 -> 0)

[    2.836619] <3>.(0)[131:kworker/u8:4]mfg: Power-off latency exceeded, new value 16153 ns

[    2.836678] <3>.(0)[131:kworker/u8:4]regulator regulator.6: mt6397 buck set_mode 0x290, 0x100, 0x8, 0x0

[    2.837326] <3>.(0)[155:PTP_CTRL_BIG][Power/cpufreq] [ERROR]@set_cur_volt_big():2030, mv = 800

[    2.837444] <3>.(0)[131:kworker/u8:4]regulator regulator.1: mt6397 buck set_mode 0x218, 0x800, 0xb, 0x0

[    2.842862] <3>.(0)[131:kworker/u8:4][Power/cpufreq] [ERROR]vpca57 should be REGULATOR_MODE_NORMAL(2), but mode = -22

[    2.849704] <3>.(3)[1:swapper/0]android_usb gadget: Number of LUNs=1

[    2.850486] <3>.(3)[1:swapper/0] lun0: LUN: removable file: (no medium)

[    2.851427] <3>.(3)[1:swapper/0]android_usb gadget: android_usb ready

[    2.852235] <3>.(3)[1:swapper/0]mtk-tpd: MediaTek touch panel driver init

[    2.852238] <3>.(2)[6:kworker/u8:0][MU3D]mu3d_hal_clear_intr

[    2.852245] <3>.(2)[6:kworker/u8:0]musb-mtu3d 11270000.usb: gadget pullup D- (soft-disconnect)

[    2.852250] <3>.(2)[6:kworker/u8:0][MU3D]connection_work ----Disconnect----,0

[    2.856138] <3>.(3)[1:swapper/0]mtk-tpd: enter tpd_probe, 570

[    2.856231] <3>.(0)[156:PTP_CTRL_GPU]vgpu: unsupportable voltage range: 700000-9999uV

[    2.856237] <3>.(0)[156:PTP_CTRL_GPU][GPU_DVFS] mt_gpu_volt_switch: fail to set voltage 0xFFFFFFEA (1000 -> 0)

[    2.859101] <3>.(3)[1:swapper/0]mtk_tpd: TPD_RES_X = 1200, TPD_RES_Y = 1920

[    2.860001] <3>.(3)[1:swapper/0][focal]board_type:0x28, rev:0x40

[    3.230005] <1>.(1)[68:hps_main]CPU3: shutdown

[    3.231260] <1>.(1)[68:hps_main][HPS] (0400)(2)(2)action end(0)(0)(0)(0) (2)(2)(2)(2)(2)(2)(2)(2)(1)(0) (0)(0)(0) (2087)(13)(3) (0)(0)(13)(0)(0)

[    3.259841] <2>.(2)[1:swapper/0]ft5726 7-0038: [focal] Create proc entry success!

[    3.260935] <0>.(0)[1:swapper/0][focal] uc_tp_fm_ver = 0x91, uc_host_fm_ver = 0x91

[    3.262271] <1>.(1)[1:swapper/0]mtk-tpd: [mtk-tpd]tpd_probe, tpd_driver_name=ft5726

[    3.263353] <2>.(2)[1:swapper/0]mtk-tpd: Cap touch panel driver

[    3.264331] <2>.(2)[1:swapper/0]input: mtk-tpd as /devices/virtual/input/input6

[    3.265378] <2>.(2)[1:swapper/0]mtk-tpd: ft_vendor_id = 0x3e

[    3.267200] <2>.(2)[1:swapper/0]mt-rtc mt-rtc: setting system clock to 2019-04-08 18:20:20 UTC (1554747620)

[    3.268965] <2>.(2)[1:swapper/0]battery_probe: no platform data. replace with default settings.

[    3.271402] <2>.(2)[165:bat_thread_kthr]wait usb connection ready..

[    3.379479] <1>.(1)[165:bat_thread_kthr]wait usb connection ready..

[    3.489480] <2>.(2)[165:bat_thread_kthr]wait usb connection ready..

[    3.599516] <1>.(1)[165:bat_thread_kthr]wait usb connection ready..

[    3.613739] <0>.(0)[1:swapper/0]cv:4096 ocv:4143 i:5332 r:78

[    3.614637] <0>-(0)[1:swapper/0]mtk_rtc_hal_common: rtc_spare_reg[0] = {57372, 127, 8}

[    3.615624] <0>-(0)[1:swapper/0]mtk_rtc_hal_common: rtc_spare_reg[15] = {57376, 7, 13}

[    3.616610] <0>.(0)[1:swapper/0]dod_init: residual index 2

[    3.617289] <0>.(0)[1:swapper/0]dod_init: 4156, 86, 84, 84

[    3.709499] <2>.(2)[165:bat_thread_kthr]wait usb connection ready..

[    3.741691] <2>-(2)[1:swapper/0]mtk_rtc_hal_common: rtc_spare_reg[0] = {57372, 127, 8}

[    3.743159] <2>.(2)[1:swapper/0]bat_setup_charger_locked: charger setup done

[    3.746147] <2>.(2)[1:swapper/0][cmb_stub] thermal_ctrl_cb null

[    3.757307] <0>.(0)[167:wdtk-0][WDK], local_bit:0x0, cpu:0,RT[3757299238]

[    3.757313] <0>.(0)[167:wdtk-0][WDK], local_bit:0x1, cpu:0, check bit0x:f,RT[3757308546]

[    3.757326] <0>.(0)[167:wdtk-0][thread:167][RT:3757316700] 2019-04-08 18:20:20.990140 UTC;android time 2019-04-08 18:20:20.990140

[    3.757391] <0>.(1)[168:wdtk-1][WDK], local_bit:0x1, cpu:1,RT[3757386392]

[    3.757397] <0>.(1)[168:wdtk-1][WDK], local_bit:0x3, cpu:1, check bit0x:f,RT[3757393084]

[    3.757409] <0>.(1)[168:wdtk-1][thread:168][RT:3757399315] 2019-04-08 18:20:20.990224 UTC;android time 2019-04-08 18:20:20.990224

[    3.767548] <0>.(2)[169:wdtk-2][WDK], local_bit:0x3, cpu:2,RT[3767539469]

[    3.767552] <0>.(0)[1:swapper/0][WDK] WDT start kicker done CPU_NR=4

[    3.767559] <0>.(2)[169:wdtk-2][WDK], local_bit:0x7, cpu:2, check bit0x:f,RT[3767550161]

[    3.767578] <0>.(2)[169:wdtk-2][thread:169][RT:3767562469] 2019-04-08 18:20:21.387 UTC;android time 2019-04-08 18:20:21.387

[    3.771673] <0>.(0)[1:swapper/0][cpu_ntf] <00>ffffffc0007223c4 (wk_cpu_callback)

[    3.772596] <0>.(0)[1:swapper/0][WDK]init_wk done late_initcall cpus_kick_bit=0x7 -----

[    3.773669] <0>.(0)[1:swapper/0]Amazon: sign of life device driver init

[    3.774499] <0>.(0)[1:swapper/0]life_cycle_platform_init: Support MTK platform

[    3.775400] <0>.(0)[1:swapper/0]mtk_read_boot_reason: boot_reason is 0x9001

[    3.776265] <0>-(0)[1:swapper/0]mtk_clear_boot_reason()

[    3.777927] <0>.(0)[1:swapper/0]mtk_read_shutdown_reason: shutdown reason new spare2 is 0x4101

[    3.778999] <0>.(0)[1:swapper/0]mtk_read_shutdown_reason: shutdown reason new spare1 is 0x8001

[    3.780102] <0>.(0)[1:swapper/0]mtk_read_thermal_shutdown_reason: thermal shutdown reason 0x1

[    3.781160] <0>.(0)[1:swapper/0]Failed to read thermal shutdown reason

[    3.781977] <0>.(0)[1:swapper/0]mtk_read_special_mode: special mode is 0x0

[    3.782829] <0>.(0)[1:swapper/0]Failed to read special mode

[    3.783525] <0>.(0)[1:swapper/0]life_cycle_reason_lookup: life cycle reason is SW Long Pressed Power Key Shutdown

[    3.784805] <0>.(0)[1:swapper/0]dev_sol_init: life cycle reason is Long Pressed Power Key Shutdown

[    3.785956] <0>.(0)[1:swapper/0]dev_sol_init: not in charger mode. Reset LCR registers.

[    3.803124] <2>.(2)[1:swapper/0][VcoreFS] late_init_to_lowpwr_opp[760], feature_en = 1, is_fhd = 1

[    3.804252] <2>.(2)[1:swapper/0][VcoreFS] kick_dvfs_by_index[653], 0 kick: lock = 0, index = 1, curr_index = 0 (0)

[    3.805549] <2>.(2)[1:swapper/0][VcoreFS] kick_dvfs_by_index[655], vcore_dvfs_before_late_init=1, dtcm_ready=0, md32_mobile_log_ready=0

[    3.807195] <0>.(0)[171:vcorefs][VcoreFS] vcorefs_kthread[696], vcore_dvfs_before_late_init=1, dtcm_ready=0, md32_mobile_log_ready=0

[    3.807684] <0>.(2)[1:swapper/0]ALSA device list:

[    3.807691] <0>.(2)[1:swapper/0]  #0: mt-snd-card

[    3.810393] <2>.(2)[1:swapper/0]Freeing unused kernel memory: 464K (ffffffc000e0b000 - ffffffc000e7f000)

[    3.811606] <2>.(2)[1:swapper/0]Freeing alternatives memory: 32K (ffffffc000e7f000 - ffffffc000e87000)

[    3.812773] <2>.(2)[1:swapper/0]BOOTPROF:      3812.766777:Kernel_init_done

[    3.819512] <0>.(0)[165:bat_thread_kthr]wait usb connection ready..

[    3.820521] <2>.(2)[1:init]init: init first stage started!

[    3.821471] <2>.(2)[1:init]init: Using Android DT directory /proc/device-tree/firmware/android/

[    3.822696] <2>.(2)[1:init]init: First stage mount skipped (missing/incompatible fstab in device tree)

[    3.823898] <2>.(2)[1:init]init: Skipped setting INIT_AVB_VERSION (not in recovery mode)

[    3.825138] <2>.(2)[1:init]init: Loading SELinux policy

[    3.851094] <2>.(2)[1:init]SELinux:  Permission transition in class filesystem not defined in policy.

[    3.852254] <2>.(2)[1:init]SELinux:  Permission swapon in class file not defined in policy.

[    3.853296] <2>.(2)[1:init]SELinux:  Permission swapon in class dir not defined in policy.

[    3.854328] <2>.(2)[1:init]SELinux:  Permission swapon in class lnk_file not defined in policy.

[    3.855410] <2>.(2)[1:init]SELinux:  Permission swapon in class chr_file not defined in policy.

[    3.856495] <2>.(2)[1:init]SELinux:  Permission swapon in class blk_file not defined in policy.

[    3.857579] <2>.(2)[1:init]SELinux:  Permission swapon in class sock_file not defined in policy.

[    3.858674] <2>.(2)[1:init]SELinux:  Permission swapon in class fifo_file not defined in policy.

[    3.859795] <2>.(2)[1:init]SELinux:  Permission recv_msg in class socket not defined in policy.

[    3.860873] <2>.(2)[1:init]SELinux:  Permission send_msg in class socket not defined in policy.

[    3.861962] <2>.(2)[1:init]SELinux:  Permission recv_msg in class tcp_socket not defined in policy.

[    3.863085] <2>.(2)[1:init]SELinux:  Permission send_msg in class tcp_socket not defined in policy.

[    3.864214] <2>.(2)[1:init]SELinux:  Permission connectto in class tcp_socket not defined in policy.

[    3.865352] <2>.(2)[1:init]SELinux:  Permission newconn in class tcp_socket not defined in policy.

[    3.866470] <2>.(2)[1:init]SELinux:  Permission acceptfrom in class tcp_socket not defined in policy.

[    3.867626] <2>.(2)[1:init]SELinux:  Permission recv_msg in class udp_socket not defined in policy.

[    3.868747] <2>.(2)[1:init]SELinux:  Permission send_msg in class udp_socket not defined in policy.

[    3.869919] <2>.(2)[1:init]SELinux:  Permission recv_msg in class rawip_socket not defined in policy.

[    3.871062] <2>.(2)[1:init]SELinux:  Permission send_msg in class rawip_socket not defined in policy.

[    3.872213] <2>.(2)[1:init]SELinux:  Permission tcp_recv in class node not defined in policy.

[    3.873273] <2>.(2)[1:init]SELinux:  Permission tcp_send in class node not defined in policy.

[    3.874337] <2>.(2)[1:init]SELinux:  Permission udp_recv in class node not defined in policy.

[    3.875399] <2>.(2)[1:init]SELinux:  Permission udp_send in class node not defined in policy.

[    3.876462] <2>.(2)[1:init]SELinux:  Permission rawip_recv in class node not defined in policy.

[    3.877547] <2>.(2)[1:init]SELinux:  Permission rawip_send in class node not defined in policy.

[    3.878632] <2>.(2)[1:init]SELinux:  Permission enforce_dest in class node not defined in policy.

[    3.879751] <2>.(2)[1:init]SELinux:  Permission dccp_recv in class node not defined in policy.

[    3.880817] <2>.(2)[1:init]SELinux:  Permission dccp_send in class node not defined in policy.

[    3.881892] <2>.(2)[1:init]SELinux:  Permission tcp_recv in class netif not defined in policy.

[    3.882965] <2>.(2)[1:init]SELinux:  Permission tcp_send in class netif not defined in policy.

[    3.884038] <2>.(2)[1:init]SELinux:  Permission udp_recv in class netif not defined in policy.

[    3.885112] <2>.(2)[1:init]SELinux:  Permission udp_send in class netif not defined in policy.

[    3.886186] <2>.(2)[1:init]SELinux:  Permission rawip_recv in class netif not defined in policy.

[    3.887281] <2>.(2)[1:init]SELinux:  Permission rawip_send in class netif not defined in policy.

[    3.888377] <2>.(2)[1:init]SELinux:  Permission dccp_recv in class netif not defined in policy.

[    3.889478] <2>.(2)[1:init]SELinux:  Permission dccp_send in class netif not defined in policy.

[    3.890559] <2>.(2)[1:init]SELinux:  Permission recv_msg in class netlink_socket not defined in policy.

[    3.891726] <2>.(2)[1:init]SELinux:  Permission send_msg in class netlink_socket not defined in policy.

[    3.892901] <2>.(2)[1:init]SELinux:  Permission recv_msg in class packet_socket not defined in policy.

[    3.894058] <2>.(2)[1:init]SELinux:  Permission send_msg in class packet_socket not defined in policy.

[    3.895221] <2>.(2)[1:init]SELinux:  Permission recv_msg in class key_socket not defined in policy.

[    3.896344] <2>.(2)[1:init]SELinux:  Permission send_msg in class key_socket not defined in policy.

[    3.897473] <2>.(2)[1:init]SELinux:  Permission recv_msg in class unix_stream_socket not defined in policy.

[    3.898686] <2>.(2)[1:init]SELinux:  Permission send_msg in class unix_stream_socket not defined in policy.

[    3.899911] <2>.(2)[1:init]SELinux:  Permission newconn in class unix_stream_socket not defined in policy.

[    3.901105] <2>.(2)[1:init]SELinux:  Permission acceptfrom in class unix_stream_socket not defined in policy.

[    3.902343] <2>.(2)[1:init]SELinux:  Permission recv_msg in class unix_dgram_socket not defined in policy.

[    3.903545] <2>.(2)[1:init]SELinux:  Permission send_msg in class unix_dgram_socket not defined in policy.

[    3.904757] <2>.(2)[1:init]SELinux:  Permission recv_msg in class netlink_route_socket not defined in policy.

[    3.905985] <2>.(2)[1:init]SELinux:  Permission send_msg in class netlink_route_socket not defined in policy.

[    3.907223] <2>.(2)[1:init]SELinux:  Class netlink_firewall_socket not defined in policy.

[    3.908243] <2>.(2)[1:init]SELinux:  Permission recv_msg in class netlink_tcpdiag_socket not defined in policy.

[    3.909512] <2>.(2)[1:init]SELinux:  Permission send_msg in class netlink_tcpdiag_socket not defined in policy.

[    3.910761] <2>.(2)[1:init]SELinux:  Permission recv_msg in class netlink_nflog_socket not defined in policy.

[    3.911994] <2>.(2)[1:init]SELinux:  Permission send_msg in class netlink_nflog_socket not defined in policy.

[    3.913233] <2>.(2)[1:init]SELinux:  Permission recv_msg in class netlink_xfrm_socket not defined in policy.

[    3.914456] <2>.(2)[1:init]SELinux:  Permission send_msg in class netlink_xfrm_socket not defined in policy.

[    3.915686] <2>.(2)[1:init]SELinux:  Permission recv_msg in class netlink_selinux_socket not defined in policy.

[    3.916940] <2>.(2)[1:init]SELinux:  Permission send_msg in class netlink_selinux_socket not defined in policy.

[    3.918200] <2>.(2)[1:init]SELinux:  Permission recv_msg in class netlink_audit_socket not defined in policy.

[    3.919435] <2>.(2)[1:init]SELinux:  Permission send_msg in class netlink_audit_socket not defined in policy.

[    3.920682] <2>.(2)[1:init]SELinux:  Class netlink_ip6fw_socket not defined in policy.

[    3.921661] <2>.(2)[1:init]SELinux:  Permission recv_msg in class netlink_dnrt_socket not defined in policy.

[    3.922884] <2>.(2)[1:init]SELinux:  Permission send_msg in class netlink_dnrt_socket not defined in policy.

[    3.924113] <2>.(2)[1:init]SELinux:  Permission recv_msg in class netlink_kobject_uevent_socket not defined in policy.

[    3.925444] <2>.(2)[1:init]SELinux:  Permission send_msg in class netlink_kobject_uevent_socket not defined in policy.

[    3.926779] <2>.(2)[1:init]SELinux:  Permission recv_msg in class appletalk_socket not defined in policy.

[    3.927971] <2>.(2)[1:init]SELinux:  Permission send_msg in class appletalk_socket not defined in policy.

[    3.929170] <2>.(2)[1:init]SELinux:  Permission recv_msg in class dccp_socket not defined in policy.

[    3.929496] <2>.(0)[165:bat_thread_kthr]wait usb connection ready..

[    3.931084] <2>.(2)[1:init]SELinux:  Permission send_msg in class dccp_socket not defined in policy.

[    3.932228] <2>.(2)[1:init]SELinux:  Permission recv_msg in class tun_socket not defined in policy.

[    3.933350] <2>.(2)[1:init]SELinux:  Permission send_msg in class tun_socket not defined in policy.

[    3.934480] <2>.(2)[1:init]SELinux: the above unknown classes and permissions will be denied

[    4.004376] <2>.(2)[1:init]audit: type=1403 audit(1554747621.230:2): policy loaded auid=4294967295 ses=4294967295

[    4.005784] <2>.(2)[1:init]selinux: SELinux: Loaded policy from /sepolicy

[    4.005784] <2>

[    4.008434] <2>.(2)[1:init]selinux: SELinux: Loaded file_contexts

[    4.008434] <2>

[    4.010711] <0>.(0)[1:init]random: init urandom read with 21 bits of entropy available

[    4.014809] <0>.(0)[1:init]init: init second stage started!

[    4.021766] <2>.(2)[1:init]init: Using Android DT directory /proc/device-tree/firmware/android/

[    4.023270] <2>.(2)[1:init]init: Init cannot set 'ro.boot.selinux' to 'enforcing': Read-only property was already set

[    4.025919] <2>.(2)[1:init]selinux: SELinux: Loaded file_contexts

[    4.025919] <2>

[    4.026897] <2>.(2)[1:init]init: Running restorecon...

[    4.029278] <2>.(2)[1:init]selinux: SELinux:  Could not stat /dev/block: No such file or directory.

[    4.029278] <2>

[    4.030760] <2>.(2)[1:init]init: waitid failed: No child processes

[    4.031552] <2>.(2)[1:init]init: Couldn't load property file '/system/etc/prop.default': open() failed: No such file or directory: No such file or directory

[    4.033305] <2>.(2)[1:init]init: Couldn't load property file '/prop.default': open() failed: No such file or directory: No such file or directory

[    4.035508] <2>.(2)[1:init]init: Couldn't load property file '/product/build.prop': open() failed: No such file or directory: No such file or directory

[    4.037210] <2>.(2)[1:init]init: Couldn't load property file '/odm/default.prop': open() failed: No such file or directory: No such file or directory

[    4.038891] <2>.(2)[1:init]init: Couldn't load property file '/vendor/default.prop': open() failed: No such file or directory: No such file or directory

[    4.040850] <2>.(2)[1:init]init: Created socket '/dev/socket/property_service', mode 666, user 0, group 0

[    4.042531] <2>.(2)[1:init]init: Forked subcontext for 'u:r:vendor_init:s0' with pid 172

[    4.043929] <2>.(2)[1:init]init: Forked subcontext for 'u:r:vendor_init:s0' with pid 173

[    4.045031] <2>.(2)[1:init]init: Parsing file /init.rc...

[    4.046102] <2>.(2)[1:init]init: Added '/init.environ.rc' to import list

[    4.046934] <2>.(2)[1:init]init: Added '/init.usb.rc' to import list

[    4.047729] <2>.(2)[1:init]init: Added '/init.mt8173.rc' to import list

[    4.048551] <2>.(2)[1:init]init: Added '/vendor/etc/init/hw/init.mt8173.rc' to import list

[    4.049507] <2>.(0)[165:bat_thread_kthr]wait usb connection ready..

[    4.050751] <2>.(2)[1:init]init: Added '/init.usb.configfs.rc' to import list

[    4.051655] <2>.(2)[1:init]init: Added '/init.zygote64_32.rc' to import list

[    4.053602] <2>.(2)[1:init]init: Parsing file /init.environ.rc...

[    4.054431] <2>.(2)[1:init]init: Parsing file /init.usb.rc...

[    4.055342] <2>.(2)[1:init]init: Parsing file /init.mt8173.rc...

[    4.056373] <2>.(2)[1:init]init: Added 'init.project.rc' to import list

[    4.057191] <2>.(2)[1:init]init: Added '/FWUpgradeInit.rc' to import list

[    4.058036] <2>.(2)[1:init]init: Added 'init.xlog.rc' to import list

[    4.058828] <2>.(2)[1:init]init: Added 'init.aee.rc' to import list

[    4.059633] <2>.(2)[1:init]init: Added 'init.fon.rc' to import list

[    4.060406] <2>.(2)[1:init]init: Added 'init.volte.rc' to import list

[    4.061208] <2>.(2)[1:init]init: Added 'init.mal.rc' to import list

[    4.061989] <2>.(2)[1:init]init: Added 'init.epdg.rc' to import list

[    4.062781] <2>.(2)[1:init]init: Added 'init.trustonic.rc' to import list

[    4.063628] <2>.(2)[1:init]init: Added 'init.common_svc.rc' to import list

[    4.064484] <2>.(2)[1:init]init: Added 'init.mt8173.usb.rc' to import list

[    4.065340] <2>.(2)[1:init]init: Added 'init.ssd.rc' to import list

[    4.066122] <2>.(2)[1:init]init: Added 'init.modem.rc' to import list

[    4.067182] <2>.(2)[1:init]init: /init.mt8173.rc: 318: Invalid keyword 'mknod'

[    4.068178] <2>.(2)[1:init]init: /init.mt8173.rc: 445: Invalid keyword 'mknod'

[    4.069076] <2>.(2)[1:init]init: /init.mt8173.rc: 452: Invalid keyword 'mknod'

[    4.070562] <2>.(2)[1:init]init: /init.mt8173.rc: 751: Invalid keyword 'setprop'

[    4.071482] <2>.(2)[1:init]init: /init.mt8173.rc: 752: Invalid keyword 'setprop'

[    4.072402] <2>.(2)[1:init]init: /init.mt8173.rc: 753: Invalid keyword 'setprop'

[    4.073324] <2>.(2)[1:init]init: /init.mt8173.rc: 754: Invalid keyword 'setprop'

[    4.074246] <2>.(2)[1:init]init: /init.mt8173.rc: 755: Invalid keyword 'setprop'

[    4.075168] <2>.(2)[1:init]init: /init.mt8173.rc: 756: Invalid keyword 'setprop'

[    4.076089] <2>.(2)[1:init]init: /init.mt8173.rc: 757: Invalid keyword 'setprop'

[    4.077011] <2>.(2)[1:init]init: /init.mt8173.rc: 758: Invalid keyword 'setprop'

[    4.077933] <2>.(2)[1:init]init: /init.mt8173.rc: 759: Invalid keyword 'setprop'

[    4.078855] <2>.(2)[1:init]init: /init.mt8173.rc: 760: Invalid keyword 'setprop'

[    4.079796] <2>.(2)[1:init]init: /init.mt8173.rc: 762: Invalid keyword 'setprop'

[    4.081561] <2>.(2)[1:init]init: /init.mt8173.rc: 1399: Invalid keyword 'chomd'

[    4.082502] <2>.(2)[1:init]init: /init.mt8173.rc: 1427: Invalid keyword 'enabled'

[    4.083475] <2>.(2)[1:init]init: Parsing file init.project.rc...

[    4.084284] <2>.(2)[1:init]init: Added 'init.suez.usb.rc' to import list

[    4.085112] <2>.(2)[1:init]init: Added 'init.rc.ufsd' to import list

[    4.085902] <2>.(2)[1:init]init: Added 'init.charging.rc' to import list

[    4.086737] <2>.(2)[1:init]init: Added 'init.coredump.rc' to import list

[    4.087593] <2>.(2)[1:init]init: init.project.rc: 54: Invalid keyword 'mknod'

[    4.088508] <2>.(2)[1:init]init: init.project.rc: 114: Invalid keyword 'mknod'

[    4.089435] <2>.(2)[1:init]init: init.project.rc: 144: ignored duplicate definition of service 'atci_service'

[    4.090695] <2>.(2)[1:init]init: init.project.rc: 150: ignored duplicate definition of service 'atcid-daemon-u'

[    4.091957] <2>.(2)[1:init]init: init.project.rc: 156: ignored duplicate definition of service 'atcid-daemon-e'

[    4.093243] <2>.(2)[1:init]init: init.project.rc: 179: ignored duplicate definition of service 'audio-daemon'

[    4.094596] <2>.(2)[1:init]init: Parsing file init.suez.usb.rc...

[    4.096464] <2>.(2)[1:init]init: Parsing file init.rc.ufsd...

[    4.097184] <2>.(2)[1:init]init: Unable to read config file 'init.rc.ufsd': open() failed: No such file or directory

[    4.098491] <2>.(2)[1:init]init: /init.rc: 4: Could not import file 'init.rc.ufsd': No such file or directory

[    4.099748] <2>.(2)[1:init]init: Parsing file init.charging.rc...

[    4.100508] <2>.(2)[1:init]init: Unable to read config file 'init.charging.rc': open() failed: No such file or directory

[    4.101857] <2>.(2)[1:init]init: /init.rc: 5: Could not import file 'init.charging.rc': No such file or directory

[    4.103140] <2>.(2)[1:init]init: Parsing file init.coredump.rc...

[    4.103902] <2>.(2)[1:init]init: Unable to read config file 'init.coredump.rc': open() failed: No such file or directory

[    4.105252] <2>.(2)[1:init]init: /init.rc: 6: Could not import file 'init.coredump.rc': No such file or directory

[    4.106535] <2>.(2)[1:init]init: Parsing file /FWUpgradeInit.rc...

[    4.107308] <2>.(2)[1:init]init: Unable to read config file '/FWUpgradeInit.rc': open() failed: No such file or directory

[    4.108669] <2>.(2)[1:init]init: /init.rc: 4: Could not import file '/FWUpgradeInit.rc': No such file or directory

[    4.109976] <2>.(2)[1:init]init: Parsing file init.xlog.rc...

[    4.110691] <2>.(2)[1:init]init: Unable to read config file 'init.xlog.rc': open() failed: No such file or directory

[    4.111998] <2>.(2)[1:init]init: /init.rc: 5: Could not import file 'init.xlog.rc': No such file or directory

[    4.113236] <2>.(2)[1:init]init: Parsing file init.aee.rc...

[    4.113944] <2>.(2)[1:init]init: Unable to read config file 'init.aee.rc': open() failed: No such file or directory

[    4.115240] <2>.(2)[1:init]init: /init.rc: 6: Could not import file 'init.aee.rc': No such file or directory

[    4.116468] <2>.(2)[1:init]init: Parsing file init.fon.rc...

[    4.117176] <2>.(2)[1:init]init: Unable to read config file 'init.fon.rc': open() failed: No such file or directory

[    4.118472] <2>.(2)[1:init]init: /init.rc: 7: Could not import file 'init.fon.rc': No such file or directory

[    4.119714] <2>.(2)[1:init]init: Parsing file init.volte.rc...

[    4.120440] <2>.(2)[1:init]init: Unable to read config file 'init.volte.rc': open() failed: No such file or directory

[    4.121757] <2>.(2)[1:init]init: /init.rc: 8: Could not import file 'init.volte.rc': No such file or directory

[    4.123007] <2>.(2)[1:init]init: Parsing file init.mal.rc...

[    4.123716] <2>.(2)[1:init]init: Unable to read config file 'init.mal.rc': open() failed: No such file or directory

[    4.125011] <2>.(2)[1:init]init: /init.rc: 9: Could not import file 'init.mal.rc': No such file or directory

[    4.126240] <2>.(2)[1:init]init: Parsing file init.epdg.rc...

[    4.126958] <2>.(2)[1:init]init: Unable to read config file 'init.epdg.rc': open() failed: No such file or directory

[    4.128265] <2>.(2)[1:init]init: /init.rc: 10: Could not import file 'init.epdg.rc': No such file or directory

[    4.129527] <2>.(2)[1:init]init: Parsing file init.trustonic.rc...

[    4.130297] <2>.(2)[1:init]init: Unable to read config file 'init.trustonic.rc': open() failed: No such file or directory

[    4.131657] <2>.(2)[1:init]init: /init.rc: 11: Could not import file 'init.trustonic.rc': No such file or directory

[    4.132961] <2>.(2)[1:init]init: Parsing file init.common_svc.rc...

[    4.133745] <2>.(2)[1:init]init: Unable to read config file 'init.common_svc.rc': open() failed: No such file or directory

[    4.135117] <2>.(2)[1:init]init: /init.rc: 12: Could not import file 'init.common_svc.rc': No such file or directory

[    4.136432] <2>.(2)[1:init]init: Parsing file init.mt8173.usb.rc...

[    4.137215] <2>.(2)[1:init]init: Unable to read config file 'init.mt8173.usb.rc': open() failed: No such file or directory

[    4.138587] <2>.(2)[1:init]init: /init.rc: 13: Could not import file 'init.mt8173.usb.rc': No such file or directory

[    4.139912] <2>.(2)[1:init]init: Parsing file init.ssd.rc...

[    4.140616] <2>.(2)[1:init]init: Unable to read config file 'init.ssd.rc': open() failed: No such file or directory

[    4.141912] <2>.(2)[1:init]init: /init.rc: 14: Could not import file 'init.ssd.rc': No such file or directory

[    4.143152] <2>.(2)[1:init]init: Parsing file init.modem.rc...

[    4.143880] <2>.(2)[1:init]init: Unable to read config file 'init.modem.rc': open() failed: No such file or directory

[    4.145199] <2>.(2)[1:init]init: /init.rc: 18: Could not import file 'init.modem.rc': No such file or directory

[    4.146467] <2>.(2)[1:init]init: Parsing file /vendor/etc/init/hw/init.mt8173.rc...

[    4.147423] <2>.(2)[1:init]init: Unable to read config file '/vendor/etc/init/hw/init.mt8173.rc': open() failed: No such file or directory

[    4.148968] <2>.(2)[1:init]init: /init.rc: 10: Could not import file '/vendor/etc/init/hw/init.mt8173.rc': No such file or directory

[    4.150472] <2>.(2)[1:init]init: Parsing file /init.usb.configfs.rc...

[    4.151554] <2>.(2)[1:init]init: Parsing file /init.zygote64_32.rc...

[    4.152432] <2>.(2)[1:init]init: Parsing file /system/etc/init...

[    4.153192] <2>.(2)[1:init]init: Unable to read config file '/system/etc/init': open() failed: No such file or directory

[    4.154549] <2>.(2)[1:init]init: Parsing file /product/etc/init...

[    4.155320] <2>.(2)[1:init]init: Unable to read config file '/product/etc/init': open() failed: No such file or directory

[    4.156690] <2>.(2)[1:init]init: Parsing file /odm/etc/init...

[    4.157419] <2>.(2)[1:init]init: Unable to read config file '/odm/etc/init': open() failed: No such file or directory

[    4.158740] <2>.(2)[1:init]init: Parsing file /vendor/etc/init...

[    4.159515] <2>.(2)[1:init]init: Unable to read config file '/vendor/etc/init': open() failed: No such file or directory

[    4.160896] <2>.(2)[1:init]init: processing action (early-init) from (/init.rc:14)

[    4.163105] <2>.(2)[1:init]init: starting service 'ueventd'...

[    4.164614] <2>.(2)[1:init]init: processing action (early-init) from (/init.mt8173.rc:21)

[    4.165796] <2>.(2)[1:init]init: processing action (wait_for_coldboot_done) from (<Builtin Action>:0)

[    4.169008] <2>.(2)[174:ueventd]ueventd: ueventd started!

[    4.169502] <2>.(0)[165:bat_thread_kthr]wait usb connection ready..

[    4.171718] <2>.(2)[174:ueventd]selinux: SELinux: Loaded file_contexts

[    4.171718] <2>

[    4.172856] <2>.(2)[174:ueventd]ueventd: Parsing file /ueventd.rc...

[    4.173964] <2>.(2)[174:ueventd]ueventd: Parsing file /vendor/ueventd.rc...

[    4.174836] <2>.(2)[174:ueventd]ueventd: Unable to read config file '/vendor/ueventd.rc': open() failed: No such file or directory

[    4.176299] <2>.(2)[174:ueventd]ueventd: Parsing file /odm/ueventd.rc...

[    4.177148] <2>.(2)[174:ueventd]ueventd: Unable to read config file '/odm/ueventd.rc': open() failed: No such file or directory

[    4.178578] <2>.(2)[174:ueventd]ueventd: Parsing file /ueventd.mt8173.rc...

[    4.179447] <2>.(2)[174:ueventd]ueventd: Unable to read config file '/ueventd.mt8173.rc': open() failed: No such file or directory

[    4.181181] <2>.(2)[174:ueventd]ueventd: [libfs_mgr]fs_mgr_read_fstab_dt(): failed to read fstab from dt

[    4.279747] <0>.(0)[165:bat_thread_kthr]wait usb connection ready..

[    4.288454] <0>.(0)[174:ueventd]ueventd: Coldboot took 0.106 seconds

[    4.298307] <0>.(0)[1:init]init: wait for '/dev/.coldboot_done' took 131ms

[    4.299281] <0>.(0)[1:init]init: Command 'wait_for_coldboot_done' action=wait_for_coldboot_done (<Builtin Action>:0) took 132ms and succeeded

[    4.300999] <0>.(0)[1:init]init: processing action (MixHwrngIntoLinuxRng) from (<Builtin Action>:0)

[    4.302160] <0>.(0)[1:init]init: /dev/hw_random not found

[    4.302855] <0>.(0)[1:init]init: processing action (SetMmapRndBits) from (<Builtin Action>:0)

[    4.304592] <0>.(0)[1:init]init: processing action (SetKptrRestrict) from (<Builtin Action>:0)

[    4.305849] <0>.(0)[1:init]init: processing action (keychord_init) from (<Builtin Action>:0)

[    4.306974] <0>.(0)[1:init]keychord: using input dev ACCDET for fevent

[    4.307782] <0>.(0)[1:init]keychord: using input dev mtk-kpd for fevent

[    4.308647] <0>.(0)[1:init]init: processing action (console_init) from (<Builtin Action>:0)

[    4.309775] <0>.(0)[1:init]init: processing action (init) from (/init.rc:41)

[    4.318918] <0>.(0)[1:init]audit: type=1400 audit(1554747621.540:3): avc:  denied  { create } for  pid=1 comm="init" name="sdcard" scontext=u:r:init:s0 tcontext=u:object_r:tmpfs:s0 tclass=lnk_file permissive=1

[    4.327678] <0>.(0)[1:init]audit: type=1400 audit(1554747621.550:4): avc:  denied  { module_request } for  pid=1 comm="init" kmod="fs-cpuset" scontext=u:r:init:s0 tcontext=u:r:kernel:s0 tclass=system permissive=1

[    4.330363] <2>.(2)[1:init]init: Command 'mount cpuset none /dev/cpuset nodev noexec nosuid' action=init (/init.rc:162) took 2ms and failed: mount() failed: No such device

[    4.333695] <2>.(2)[1:init]init: Command 'mount cgroup2 cg2_bpf /dev/cg2_bpf nodev noexec nosuid' action=init (/init.rc:226) took 0ms and failed: mount() failed: No such device

[    4.336015] <2>.(2)[1:init]Registered swp emulation handler

[    4.337020] <2>.(2)[1:init]init: processing action (init) from (/init.environ.rc:2)

[    4.338013] <2>.(2)[1:init]init: processing action (init) from (/init.mt8173.rc:25)

[    4.339374] <2>.(2)[1:init]init: processing action (init) from (init.project.rc:8)

[    4.340711] <2>.(2)[1:init]audit: type=1400 audit(1554747621.570:5): avc:  denied  { relabelto } for  pid=1 comm="init" scontext=u:r:init:s0 tcontext=u:object_r:logd_tmpfs:s0 tclass=filesystem permissive=1

[    4.342990] <2>.(2)[1:init]audit: type=1400 audit(1554747621.570:6): avc:  denied  { relabelfrom } for  pid=1 comm="init" scontext=u:r:init:s0 tcontext=u:object_r:logd_tmpfs:s0 tclass=filesystem permissive=1

[    4.345290] <2>.(2)[1:init]audit: type=1400 audit(1554747621.570:7): avc:  denied  { associate } for  pid=1 comm="init" scontext=u:object_r:logd_tmpfs:s0 tcontext=u:object_r:logd_tmpfs:s0 tclass=filesystem permissive=1

[    4.347713] <2>.(2)[1:init]audit: type=1400 audit(1554747621.570:8): avc:  denied  { mount } for  pid=1 comm="init" name="/" dev="tmpfs" ino=5863 scontext=u:r:init:s0 tcontext=u:object_r:logd_tmpfs:s0 tclass=filesystem permissive=1

[    4.350454] <2>.(2)[1:init]init: processing action (init) from (init.project.rc:125)

[    4.351430] <2>.(2)[1:init]init: processing action (MixHwrngIntoLinuxRng) from (<Builtin Action>:0)

[    4.352561] <2>.(2)[1:init]init: /dev/hw_random not found

[    4.353245] <2>.(2)[1:init]init: processing action (late-init) from (/init.rc:279)

[    4.354210] <2>.(2)[1:init]init: processing action (queue_property_triggers) from (<Builtin Action>:0)

[    4.355380] <2>.(2)[1:init]init: processing action (fs) from (/init.mt8173.rc:61)

[    4.356409] <2>.(2)[1:init]audit: type=1400 audit(1554747621.580:9): avc:  denied  { write } for  pid=1 comm="init" name="bootprof" dev="proc" ino=4026532259 scontext=u:r:init:s0 tcontext=u:object_r:proc:s0 tclass=file permissive=1

[    4.358972] <2>.(2)[1:init]audit: type=1400 audit(1554747621.580:10): avc:  denied  { open } for  pid=1 comm="init" path="/proc/bootprof" dev="proc" ino=4026532259 scontext=u:r:init:s0 tcontext=u:object_r:proc:s0 tclass=file permissive=1

[    4.361607] <2>.(2)[1:init]BOOTPROF:      4361.604317:INIT:Mount_START

[    4.366209] <0>.(0)[182:init]init: [libfs_mgr]superblock s_max_mnt_count:65535,/dev/block/mmcblk0p13

[    4.369768] <2>.(2)[182:init]EXT4-fs (mmcblk0p13): mounted filesystem without journal. Opts: (null)

[    4.370973] <2>.(2)[182:init]init: [libfs_mgr]__mount(source=/dev/block/mmcblk0p13,target=/system,type=ext4)=0: Success

[    4.373024] <2>.(2)[182:init]init: [libfs_mgr]superblock s_max_mnt_count:65535,/dev/block/mmcblk0p15

[    4.374209] <2>.(2)[182:init]init: [libfs_mgr]Filesystem on /dev/block/mmcblk0p15 was not cleanly shutdown; state flags: 0x1, incompat feature flags: 0x46

[    4.380419] <2>.(2)[182:init]EXT4-fs (mmcblk0p15): Ignoring removed nomblk_io_submit option

[    4.389494] <0>.(0)[165:bat_thread_kthr]wait usb connection ready..

[    4.452618] <0>.(0)[182:init]EXT4-fs (mmcblk0p15): recovery complete

[    4.454088] <0>.(0)[182:init]EXT4-fs (mmcblk0p15): mounted filesystem with ordered data mode. Opts: errors=remount-ro,nomblk_io_submit

[    4.455799] <0>.(0)[182:init]init: [libfs_mgr]check_fs(): mount(/dev/block/mmcblk0p15,/data,ext4)=0: Success

[    4.498505] <0>.(0)[182:init]init: [libfs_mgr]check_fs(): unmount(/data) succeeded

[    4.499592] <0>.(2)[165:bat_thread_kthr]wait usb connection ready..

[    4.501280] <0>.(0)[182:init]init: [libfs_mgr]Running /system/bin/e2fsck on /dev/block/mmcblk0p15

[    4.609506] <0>.(0)[165:bat_thread_kthr]wait usb connection ready..

[    4.719502] <0>.(0)[165:bat_thread_kthr]wait usb connection ready..

[    4.739798] <2>.(2)[40:kworker/2:1][cmb_stub] thermal_ctrl_cb null

[    4.829529] <1>.(1)[165:bat_thread_kthr]wait usb connection ready..

[    4.939519] <1>.(1)[165:bat_thread_kthr]wait usb connection ready..

[    4.976668] <0>.(0)[182:init]e2fsck: e2fsck 1.43.3 (04-Sep-2016)

[    4.976668] <0>

[    4.977671] <0>.(0)[182:init]e2fsck: Pass 1: Checking inodes, blocks, and sizes

[    4.977671] <0>

[    4.978804] <0>.(0)[182:init]e2fsck: Pass 2: Checking directory structure

[    4.978804] <0>

[    4.979914] <0>.(0)[182:init]e2fsck: Pass 3: Checking directory connectivity

[    4.979914] <0>

[    4.981075] <0>.(0)[182:init]e2fsck: Pass 4: Checking reference counts

[    4.981075] <0>

[    4.982110] <0>.(0)[182:init]e2fsck: Pass 5: Checking group summary information

[    4.982110] <0>

[    4.983243] <0>.(0)[182:init]e2fsck: /dev/block/mmcblk0p15: 7291/1757840 files (0.6% non-contiguous), 1994891/7029248 blocks

[    4.983243] <0>

[    4.988303] <2>.(2)[182:init]EXT4-fs (mmcblk0p15): mounted filesystem with ordered data mode. Opts: noauto_da_alloc,discard

[    4.989820] <2>.(2)[182:init]init: [libfs_mgr]__mount(source=/dev/block/mmcblk0p15,target=/data,type=ext4)=0: Success

[    4.994110] <0>.(0)[182:init]init: [libfs_mgr]superblock s_max_mnt_count:65535,/dev/block/mmcblk0p14

[    4.995333] <0>.(0)[182:init]init: [libfs_mgr]Filesystem on /dev/block/mmcblk0p14 was not cleanly shutdown; state flags: 0x1, incompat feature flags: 0x46

[    4.999442] <0>.(0)[182:init]EXT4-fs (mmcblk0p14): Ignoring removed nomblk_io_submit option

[    5.007862] <2>.(2)[182:init]EXT4-fs (mmcblk0p14): recovery complete

[    5.009219] <0>.(0)[182:init]EXT4-fs (mmcblk0p14): mounted filesystem with ordered data mode. Opts: errors=remount-ro,nomblk_io_submit

[    5.010950] <0>.(0)[182:init]init: [libfs_mgr]check_fs(): mount(/dev/block/mmcblk0p14,/cache,ext4)=0: Success

[    5.049504] <2>.(2)[165:bat_thread_kthr]wait usb connection ready..

[    5.050843] <1>.(1)[182:init]init: [libfs_mgr]check_fs(): unmount(/cache) succeeded

[    5.051849] <1>.(1)[182:init]init: [libfs_mgr]Running /system/bin/e2fsck on /dev/block/mmcblk0p14

[    5.117833] <0>.(0)[182:init]e2fsck: e2fsck 1.43.3 (04-Sep-2016)

[    5.117833] <0>

[    5.118837] <0>.(0)[182:init]e2fsck: Pass 1: Checking inodes, blocks, and sizes

[    5.118837] <0>

[    5.120003] <0>.(0)[182:init]e2fsck: Pass 2: Checking directory structure

[    5.120003] <0>

[    5.121072] <0>.(0)[182:init]e2fsck: Pass 3: Checking directory connectivity

[    5.121072] <0>

[    5.122171] <0>.(0)[182:init]e2fsck: Pass 4: Checking reference counts

[    5.122171] <0>

[    5.123205] <0>.(0)[182:init]e2fsck: Pass 5: Checking group summary information

[    5.123205] <0>

[    5.124337] <0>.(0)[182:init]e2fsck: /dev/block/mmcblk0p14: 17/27136 files (0.0% non-contiguous), 3509/108544 blocks

[    5.124337] <0>

[    5.128681] <2>.(2)[182:init]EXT4-fs (mmcblk0p14): mounted filesystem with ordered data mode. Opts: noauto_da_alloc,discard

[    5.130304] <2>.(2)[182:init]init: [libfs_mgr]__mount(source=/dev/block/mmcblk0p14,target=/cache,type=ext4)=0: Success

[    5.132843] <2>.(2)[1:init]init: Parsing directory /system/etc/init...

[    5.134495] <1>.(1)[1:init]init: Parsing file /system/etc/init/android.hidl.allocator@1.0-service.rc...

[    5.136247] <1>.(1)[1:init]init: Parsing file /system/etc/init/atcid.rc...

[    5.137628] <1>.(1)[1:init]init: /system/etc/init/atcid.rc: 1: ignored duplicate definition of service 'atcid-daemon-u'

[    5.139033] <1>.(1)[1:init]init: /system/etc/init/atcid.rc: 9: ignored duplicate definition of service 'atcid-daemon-e'

[    5.140517] <1>.(1)[1:init]init: Parsing file /system/etc/init/atrace.rc...

[    5.142543] <1>.(1)[1:init]init: Parsing file /system/etc/init/atrace_userdebug.rc...

[    5.144062] <1>.(1)[1:init]init: Parsing file /system/etc/init/audiocmdservice_atci.rc...

[    5.145570] <1>.(1)[1:init]init: /system/etc/init/audiocmdservice_atci.rc: 1: ignored duplicate definition of service 'audio-daemon'

[    5.147072] <1>.(1)[1:init]init: Parsing file /system/etc/init/audioserver.rc...

[    5.148578] <1>.(1)[1:init]init: Parsing file /system/etc/init/blank_screen.rc...

[    5.150081] <1>.(1)[1:init]init: Parsing file /system/etc/init/bootanim.rc...

[    5.151442] <1>.(1)[1:init]init: Parsing file /system/etc/init/bootstat-debug.rc...

[    5.152820] <1>.(1)[1:init]init: Parsing file /system/etc/init/bootstat.rc...

[    5.154349] <1>.(1)[1:init]init: Parsing file /system/etc/init/cameraserver.rc...

[    5.155814] <1>.(1)[1:init]init: Parsing file /system/etc/init/dm_agent_binder.rc...

[    5.157290] <1>.(1)[1:init]init: /system/etc/init/dm_agent_binder.rc: 1: ignored duplicate definition of service 'DMAgent'

[    5.158683] <1>.(1)[1:init]init: Parsing file /system/etc/init/drmserver.rc...

[    5.160129] <0>.(0)[1:init]init: Parsing file /system/etc/init/dumpstate.rc...

[    5.161609] <0>.(0)[1:init]init: Parsing file /system/etc/init/em_svr.rc...

[    5.163065] <0>.(0)[1:init]init: /system/etc/init/em_svr.rc: 10: ignored duplicate definition of service 'emsvr_user'

[    5.164436] <0>.(0)[1:init]init: /system/etc/init/em_svr.rc: 15: ignored duplicate definition of service 'emsvr'

[    5.165715] <0>.(0)[1:init]init: Parsing file /system/etc/init/gatekeeperd.rc...

[    5.167149] <0>.(0)[1:init]init: Parsing file /system/etc/init/ged_srv.rc...

[    5.168670] <2>.(2)[1:init]init: Parsing file /system/etc/init/healthd.rc...

[    5.169595] <2>.(0)[165:bat_thread_kthr]wait usb connection ready..

[    5.170908] <2>.(2)[1:init]init: Parsing file /system/etc/init/hwservicemanager.rc...

[    5.172358] <2>.(2)[1:init]init: Parsing file /system/etc/init/incidentd.rc...

[    5.173815] <0>.(0)[1:init]init: Parsing file /system/etc/init/init-debug.rc...

[    5.175315] <2>.(2)[1:init]init: Parsing file /system/etc/init/init.thermald.rc...

[    5.176779] <2>.(2)[1:init]init: /system/etc/init/init.thermald.rc: 1: ignored duplicate definition of service 'thermald'

[    5.178171] <2>.(2)[1:init]init: Parsing file /system/etc/init/installd.rc...

[    5.179986] <2>.(2)[1:init]init: Parsing file /system/etc/init/keystore.rc...

[    5.181396] <0>.(0)[1:init]init: Parsing file /system/etc/init/kpoc_charger.rc...

[    5.182848] <0>.(0)[1:init]init: Parsing file /system/etc/init/lineage-adb.rc...

[    5.184267] <2>.(2)[1:init]init: Parsing file /system/etc/init/lineage-governor.rc...

[    5.186250] <2>.(2)[1:init]init: Parsing file /system/etc/init/lineage-iosched.rc...

[    5.187911] <2>.(2)[1:init]init: Parsing file /system/etc/init/lineage-livedisplay.rc...

[    5.189463] <0>.(0)[1:init]init: Parsing file /system/etc/init/lineage-radio.rc...

[    5.190973] <0>.(0)[1:init]init: Parsing file /system/etc/init/lineage-ssh.rc...

[    5.192383] <2>.(2)[1:init]init: Parsing file /system/etc/init/lineage-system.rc...

[    5.193889] <2>.(2)[1:init]init: /system/etc/init/lineage-system.rc: 28: ignored duplicate definition of service 'bugreport'

[    5.195315] <2>.(2)[1:init]init: Parsing file /system/etc/init/lineage-tcp.rc...

[    5.196708] <0>.(0)[1:init]init: Parsing file /system/etc/init/lineage-updates.rc...

[    5.198147] <0>.(0)[1:init]init: Parsing file /system/etc/init/lmkd.rc...

[    5.199532] <0>.(0)[1:init]init: Parsing file /system/etc/init/logcatd.rc...

[    5.201240] <2>.(2)[1:init]init: Parsing file /system/etc/init/logd.rc...

[    5.202695] <0>.(0)[1:init]init: Parsing file /system/etc/init/logtagd.rc...

[    5.204062] <0>.(0)[1:init]init: Parsing file /system/etc/init/mdnsd.rc...

[    5.205378] <0>.(0)[1:init]init: Parsing file /system/etc/init/mediadrmserver.rc...

[    5.206815] <0>.(0)[1:init]init: Parsing file /system/etc/init/mediaextractor.rc...

[    5.208247] <0>.(0)[1:init]init: Parsing file /system/etc/init/mediametrics.rc...

[    5.209666] <2>.(2)[1:init]init: Parsing file /system/etc/init/mediaserver.rc...

[    5.211133] <2>.(2)[1:init]init: Parsing file /system/etc/init/mtpd.rc...

[    5.212454] <2>.(2)[1:init]init: Parsing file /system/etc/init/netd.rc...

[    5.213805] <0>.(0)[1:init]init: Parsing file /system/etc/init/perfetto.rc...

[    5.215441] <0>.(0)[1:init]init: Parsing file /system/etc/init/perfprofd.rc...

[    5.216830] <0>.(0)[1:init]init: Parsing file /system/etc/init/racoon.rc...

[    5.218170] <0>.(0)[1:init]init: Parsing file /system/etc/init/servicemanager.rc...

[    5.219696] <2>.(2)[1:init]init: Parsing file /system/etc/init/sn.rc...

[    5.221051] <2>.(2)[1:init]init: /system/etc/init/sn.rc: 9: ignored duplicate definition of service 'sn'

[    5.222257] <2>.(2)[1:init]init: Parsing file /system/etc/init/statsd.rc...

[    5.223663] <0>.(0)[1:init]init: Parsing file /system/etc/init/storaged.rc...

[    5.225086] <0>.(0)[1:init]init: Parsing file /system/etc/init/storagemanagerd.rc...

[    5.226582] <0>.(0)[1:init]init: Parsing file /system/etc/init/surfaceflinger.rc...

[    5.228088] <0>.(0)[1:init]init: Parsing file /system/etc/init/thermalservice.rc...

[    5.229777] <2>.(2)[1:init]init: Parsing file /system/etc/init/tombstoned.rc...

[    5.231224] <2>.(2)[1:init]init: Parsing file /system/etc/init/uncrypt.rc...

[    5.232603] <2>.(2)[1:init]init: Parsing file /system/etc/init/usbd.rc...

[    5.233966] <0>.(0)[1:init]init: Parsing file /system/etc/init/vdc.rc...

[    5.235346] <0>.(0)[1:init]init: Parsing file /system/etc/init/vold.rc...

[    5.236684] <0>.(0)[1:init]init: Parsing file /system/etc/init/wait_for_keymaster.rc...

[    5.238138] <0>.(0)[1:init]init: Parsing file /system/etc/init/wifi-events.rc...

[    5.239819] <0>.(0)[1:init]init: Parsing file /system/etc/init/wificond.rc...

[    5.243343] <0>.(0)[1:init]init: Parsing file /product/etc/init...

[    5.244174] <0>.(0)[1:init]init: Unable to read config file '/product/etc/init': open() failed: No such file or directory

[    5.245606] <0>.(0)[1:init]init: Parsing file /odm/etc/init...

[    5.246433] <0>.(0)[1:init]init: Unable to read config file '/odm/etc/init': open() failed: No such file or directory

[    5.248394] <0>.(0)[1:init]init: Parsing directory /vendor/etc/init...

[    5.249881] <2>.(2)[1:init]init: Parsing file /vendor/etc/init/android.hardware.audio@2.0-service-mediatek.rc...

[    5.251789] <2>.(2)[1:init]init: Parsing file /vendor/etc/init/android.hardware.bluetooth@1.0-service-mediatek.rc...

[    5.253667] <2>.(2)[1:init]init: Parsing file /vendor/etc/init/android.hardware.cas@1.0-service.rc...

[    5.255315] <2>.(2)[1:init]init: Parsing file /vendor/etc/init/android.hardware.configstore@1.1-service.rc...

[    5.257061] <0>.(0)[1:init]init: Parsing file /vendor/etc/init/android.hardware.drm@1.0-service.rc...

[    5.258766] <2>.(2)[1:init]init: Parsing file /vendor/etc/init/android.hardware.drm@1.0-service.widevine.rc...

[    5.259515] <2>.(1)[122:kworker/1:1][focal] charger detected, mode = 1

[    5.261436] <0>.(0)[1:init]init: Parsing file /vendor/etc/init/android.hardware.gatekeeper@1.0-service.rc...

[    5.263264] <2>.(2)[1:init]init: Parsing file /vendor/etc/init/android.hardware.graphics.allocator@2.0-service.rc...

[    5.265121] <0>.(0)[1:init]init: Parsing file /vendor/etc/init/android.hardware.graphics.composer@2.1-service.rc...

[    5.266998] <2>.(2)[1:init]init: Parsing file /vendor/etc/init/android.hardware.keymaster@3.0-service.rc...

[    5.268734] <0>.(0)[1:init]init: Parsing file /vendor/etc/init/android.hardware.light@2.0-service-mediatek.rc...

[    5.270659] <0>.(0)[1:init]init: Parsing file /vendor/etc/init/android.hardware.media.omx@1.0-service.rc...

[    5.272375] <0>.(0)[1:init]init: Parsing file /vendor/etc/init/android.hardware.memtrack@1.0-service.rc...

[    5.274151] <2>.(2)[1:init]init: Parsing file /vendor/etc/init/android.hardware.sensors@1.0-service-mediatek.rc...

[    5.275949] <2>.(2)[1:init]init: Parsing file /vendor/etc/init/android.hardware.wifi@1.0-service.rc...

[    5.277600] <2>.(2)[1:init]init: Parsing file /vendor/etc/init/camerahalserver.rc...

[    5.279147] <0>.(0)[1:init]init: Parsing file /vendor/etc/init/gsm0710muxd.rc...

[    5.280131] <0>.(0)[165:bat_thread_kthr]wait usb connection ready..

[    5.281461] <0>.(0)[1:init]init: Parsing file /vendor/etc/init/hostapd.android.rc...

[    5.283457] <0>.(0)[1:init]init: Parsing file /vendor/etc/init/init.bt_drv.rc...

[    5.284916] <2>.(2)[1:init]init: Parsing file /vendor/etc/init/init.thermal.rc...

[    5.286353] <2>.(2)[1:init]init: /vendor/etc/init/init.thermal.rc: 1: ignored duplicate definition of service 'thermal'

[    5.287723] <2>.(2)[1:init]init: Parsing file /vendor/etc/init/init.thermal_manager.rc...

[    5.289221] <2>.(2)[1:init]init: /vendor/etc/init/init.thermal_manager.rc: 1: ignored duplicate definition of service 'thermal_manager'

[    5.290795] <2>.(2)[1:init]init: Parsing file /vendor/etc/init/init.wlan_drv.rc...

[    5.292213] <0>.(0)[1:init]init: Parsing file /vendor/etc/init/init.wmt_drv.rc...

[    5.293653] <2>.(2)[1:init]init: Parsing file /vendor/etc/init/init_connectivity.rc...

[    5.295293] <2>.(2)[1:init]init: Parsing file /vendor/etc/init/lbs_hidl_service.rc...

[    5.296785] <0>.(0)[1:init]init: Parsing file /vendor/etc/init/md_ctrl.rc...

[    5.298242] <2>.(2)[1:init]init: /vendor/etc/init/md_ctrl.rc: 13: ignored duplicate definition of service 'stop_modem'

[    5.299662] <2>.(2)[1:init]init: /vendor/etc/init/md_ctrl.rc: 18: ignored duplicate definition of service 'start_modem'

[    5.301029] <2>.(2)[1:init]init: Parsing file /vendor/etc/init/muxreport.rc...

[    5.302487] <0>.(0)[1:init]init: Parsing file /vendor/etc/init/netdagent.rc...

[    5.303896] <0>.(0)[1:init]init: Parsing file /vendor/etc/init/nvram_agent_binder.rc...

[    5.305392] <2>.(2)[1:init]init: /vendor/etc/init/nvram_agent_binder.rc: 1: ignored duplicate definition of service 'NvRAMAgent'

[    5.306859] <2>.(2)[1:init]init: Parsing file /vendor/etc/init/nvram_daemon.rc...

[    5.308281] <0>.(0)[1:init]init: /vendor/etc/init/nvram_daemon.rc: 1: ignored duplicate definition of service 'nvram_daemon'

[    5.309789] <0>.(0)[1:init]init: Parsing file /vendor/etc/init/rilproxy.rc...

[    5.311350] <0>.(0)[1:init]init: Parsing file /vendor/etc/init/trustkernel.MT8173.rc...

[    5.312936] <0>.(0)[1:init]init: Parsing file /vendor/etc/init/trustkernel.rc...

[    5.314407] <2>.(2)[1:init]init: Parsing file /vendor/etc/init/vendor.mediatek.hardware.keymaster_attestation@1.0-service.rc...

[    5.316354] <2>.(2)[1:init]init: Parsing file /vendor/etc/init/vendor.mediatek.hardware.mtkcodecservice@1.1-service.rc...

[    5.318209] <2>.(2)[1:init]init: Parsing file /vendor/etc/init/vendor.mediatek.hardware.power@1.1-service.rc...

[    5.320095] <1>.(1)[68:hps_main]CPU2: shutdown

[    5.321039] <0>.(0)[1:init]init: Parsing file /vendor/etc/init/vendor.mediatek.hardware.pq@2.0-service.rc...

[    5.322851] <1>.(1)[68:hps_main]cpufreq: cpufreq_policy_put_kobj[1078], after kobject_put(kobj), refcount=0l;

[    5.323053] <1>.(0)[1:init]init: Parsing file /vendor/etc/init/vndservicemanager.rc...

[    5.323731] <1>.(0)[1:init]init: Parsing file /vendor/etc/init/wifi2agps.rc...

[    5.324343] <1>.(0)[1:init]init: /vendor/etc/init/wifi2agps.rc: 1: ignored duplicate definition of service 'wifi2agps'

[    5.324742] <1>.(0)[1:init]init: Command 'mount_all /fstab.mt8173' action=fs (/init.mt8173.rc:68) took 962ms and succeeded

[    5.326793] <1>.(0)[1:init]init: starting service 'exec 2 (/system/bin/tune2fs -O has_journal -u 10010 -r 4096 /dev/block/platform/mtk-msdc.0/by-name/userdata)'...

[    5.327908] <1>.(0)[1:init]init: SVC_EXEC pid 197 (uid 0 gid 0+0 context default) started; waiting...

[    5.331796] <1>.(1)[68:hps_main][HPS] (0400)(2)(1)action end(96)(82)(0)(0) (2)(2)(2)(2)(2)(2)(2)(2)(1)(0) (96)(10)(0) (834)(10)(0) (0)(82)(10)(0)(82)

[    5.364086] <0>.(0)[1:init]init: Service 'exec 2 (/system/bin/tune2fs -O has_journal -u 10010 -r 4096 /dev/block/platform/mtk-msdc.0/by-name/userdata)' (pid 197) exited with status 1 waiting took 0.036000 seconds

[    5.370630] <0>.(0)[1:init]init: starting service 'exec 3 (/system/bin/chown root:system /dev/block/platform/mtk-msdc.0/by-name/frp)'...

[    5.373846] <0>.(0)[1:init]init: SVC_EXEC pid 198 (uid 0 gid 0+0 context default) started; waiting...

[    5.389565] <0>.(0)[165:bat_thread_kthr]wait usb connection ready..

[    5.430878] <0>.(0)[1:init]init: Service 'exec 3 (/system/bin/chown root:system /dev/block/platform/mtk-msdc.0/by-name/frp)' (pid 198) exited with status 1 waiting took 0.057000 seconds

[    5.433758] <0>.(0)[1:init]init: starting service 'exec 4 (/system/bin/chmod 0660 /dev/block/platform/mtk-msdc.0/by-name/frp)'...

[    5.436535] <0>.(0)[1:init]init: SVC_EXEC pid 199 (uid 0 gid 0+0 context default) started; waiting...

[    5.462358] <0>.(0)[1:init]init: Service 'exec 4 (/system/bin/chmod 0660 /dev/block/platform/mtk-msdc.0/by-name/frp)' (pid 199) exited with status 1 waiting took 0.026000 seconds

[    5.465129] <0>.(0)[1:init]BOOTPROF:      5465.115319:INIT:Mount_END

[    5.466079] <0>.(0)[1:init]init: processing action (fs) from (/init.mt8173.rc:79)

[    5.467150] <0>.(0)[1:init]init: processing action (fs) from (init.suez.usb.rc:17)

[    5.471047] <1>.(1)[1:init]init: processing action (post-fs) from (/init.rc:312)

[    5.477424] <1>.(1)[1:init]init: Unable to set property 'ro.boot.selinux' to 'disable' in property file '/system/build.prop': Read-only property was already set

[    5.480350] <1>.(1)[1:init]init: Couldn't load property file '/odm/build.prop': open() failed: No such file or directory: No such file or directory

[    5.485306] <1>.(1)[1:init]init: Couldn't load property file '/factory/factory.prop': open() failed: No such file or directory: No such file or directory

[    5.487802] <1>.(1)[1:init]init: [libfs_mgr]fs_mgr_read_fstab_dt(): failed to read fstab from dt

[    5.491145] <1>.(1)[1:init]init: starting service 'logd'...

[    5.494000] <1>.(1)[1:init]init: starting service 'servicemanager'...

[    5.494139] <1>.(0)[200:init]init: Created socket '/dev/socket/logd', mode 666, user 1036, group 1036

[    5.495054] <1>.(0)[200:init]init: Created socket '/dev/socket/logdr', mode 666, user 1036, group 1036

[    5.495908] <1>.(0)[200:init]init: Created socket '/dev/socket/logdw', mode 222, user 1036, group 1036

[    5.496175] <1>.(0)[200:init]init: Opened file '/proc/kmsg', flags 0

[    5.496240] <1>.(0)[200:init]init: Opened file '/dev/kmsg', flags 1

[    5.499580] <1>.(0)[165:bat_thread_kthr]wait usb connection ready..

[    5.503232] <1>.(1)[1:init]init: starting service 'hwservicemanager'...

[    5.506982] <0>.(0)[1:init]init: starting service 'vndservicemanager'...

[    5.515419] <0>.(0)[1:init]selinux: SELinux: Skipping restorecon_recursive(/cache)

[    5.515419] <0>

[    5.527002] <1>.(1)[1:init]selinux: SELinux:  Could not stat /metadata: No such file or directory.

[    5.527002] <1>

[    5.529844] <1>.(1)[1:init]init: processing action (post-fs) from (/init.mt8173.rc:83)

[    5.532956] <1>.(1)[1:init]init: Command 'chown system system /protect_f' action=post-fs (/init.mt8173.rc:107) took 0ms and failed: lchown() failed: Read-only file system

[    5.535110] <1>.(1)[1:init]init: Command 'chmod 0770 /protect_f' action=post-fs (/init.mt8173.rc:108) took 0ms and failed: fchmodat() failed: Read-only file system

[    5.537101] <1>.(1)[1:init]init: Command 'chown system system /protect_s' action=post-fs (/init.mt8173.rc:110) took 0ms and failed: lchown() failed: Read-only file system

[    5.539206] <1>.(1)[1:init]init: Command 'chmod 0770 /protect_s' action=post-fs (/init.mt8173.rc:111) took 0ms and failed: fchmodat() failed: Read-only file system

[    5.549778] <1>.(1)[1:init]init: processing action (post-fs) from (/system/etc/init/atrace_userdebug.rc:7)

[    5.551600] <1>.(1)[1:init]init: processing action (post-fs) from (/vendor/etc/init/trustkernel.MT8173.rc:1)

[    5.559684] <1>.(1)[1:init]init: processing action (post-fs) from (/vendor/etc/init/trustkernel.rc:1)

[    5.562556] <0>.(0)[172:init]BOOTPROF:      5562.547089:tkcore: prep SYSTA

[    5.565164] <0>.(0)[1:init]init: Command 'chown system system /vendor/app/t6' action=post-fs (/vendor/etc/init/trustkernel.rc:3) took 1ms and failed: lchown() failed: Read-only file system

[    5.567841] <1>.(1)[172:init]BOOTPROF:      5567.823704:tkcore: prep PP

[    5.569438] <0>.(0)[1:init]init: File /vendor/bin/teed(labeled "u:object_r:vendor_file:s0") has incorrect label or no domain transition from u:r:init:s0 to another SELinux domain defined. Have you configured your service correctly? https://source.android.com/security/selinux/device-policy#label_new_services_and_address_denials

[    5.573201] <0>.(0)[1:init]init: starting service 'teed'...

[    5.575711] <0>.(0)[1:init]init: processing action (late-fs) from (/init.rc:377)

[    5.576135] <0>.(1)[200:logd]logd.auditd: start

[    5.576179] <0>.(1)[200:logd]logd.klogd: 5556703923

[    5.579731] <1>.(1)[1:init]init: starting service 'vendor.keymaster-3-0'...

[    5.581877] <1>.(1)[1:init]init: processing action (post-fs-data) from (/init.rc:385)

[    5.584273] <0>.(0)[1:init]init: starting service 'vold'...

[    5.609544] <0>.(0)[165:bat_thread_kthr]wait usb connection ready..

[    5.631246] <0>.(0)[213:logd.auditd]type=1400 audit(1554747622.800:18): avc: denied { execute_no_trans } for pid=205 comm="init" path="/system/vendor/bin/teed" dev="mmcblk0p13" ino=2303 scontext=u:r:init:s0 tcontext=u:object_r:vendor_file:s0 tclass=file permissive=1

[    5.654226] <1>.(1)[202:hwservicemanage]binder: 202:202 ioctl 4018620d 7ff0403230 returned -22

[    5.694925] <0>.(0)[1:init]init: Service 'teed' (pid 205) exited with status 253

[    5.695890] <0>.(0)[1:init]init: Sending signal 9 to service 'teed' (pid 205) process group...

[    5.697128] <0>.(0)[1:init]libprocessgroup: Successfully killed process cgroup uid 1000 pid 205 in 0ms

[    5.719576] <0>.(0)[165:bat_thread_kthr]wait usb connection ready..

[    5.734203] <0>.(0)[68:hps_main][HPS] (0004)(2)(0)action end(200)(378)(0)(2) (2)(2)(2)(2)(2)(2)(2)(2)(1)(0) (105)(1)(0) (105)(1)(1) (0)(117)(1)(0)(117)

[    5.739837] <1>.(1)[122:kworker/1:1][cmb_stub] thermal_ctrl_cb null

[    5.795948] <2>.(2)[1:init]init: starting service 'exec 5 (/system/bin/vdc --wait cryptfs init_user0)'...

[    5.798097] <2>.(2)[1:init]init: SVC_EXEC pid 219 (uid 0 gid 0+0 context default) started; waiting...

[    5.829525] <0>.(0)[165:bat_thread_kthr]wait usb connection ready..

[    5.849661] <1>.(1)[1:init]init: Service 'exec 5 (/system/bin/vdc --wait cryptfs init_user0)' (pid 219) exited with status 0 waiting took 0.051000 seconds

[    5.851947] <1>.(1)[1:init]selinux: SELinux: Skipping restorecon_recursive(/data)

[    5.851947] <1>

[    5.853633] <1>.(1)[1:init]init: starting service 'exec 6 (/system/bin/tzdatacheck /system/usr/share/zoneinfo /data/misc/zoneinfo)'...

[    5.856035] <1>.(1)[1:init]init: SVC_EXEC pid 221 (uid 1000 gid 1000+0 context default) started; waiting...

[    5.870936] <1>.(1)[1:init]init: Service 'exec 6 (/system/bin/tzdatacheck /system/usr/share/zoneinfo /data/misc/zoneinfo)' (pid 221) exited with status 0 waiting took 0.015000 seconds

[    5.873158] <1>.(1)[1:init]init: processing action (post-fs-data) from (/init.usb.rc:6)

[    5.874513] <0>.(0)[213:logd.auditd]type=1400 audit(1554747622.800:18): avc: denied { execute_no_trans } for pid=205 comm="init" path="/system/vendor/bin/teed" dev="mmcblk0p13" ino=2303 scontext=u:r:init:s0 tcontext=u:object_r:vendor_file:s0 tclass=file permissive=1

[    5.877580] <0>.(0)[213:logd.auditd]type=1400 audit(1554747623.100:19): avc: denied { setattr } for pid=1 comm="init" name="file" dev="sysfs" ino=16550 scontext=u:r:init:s0 tcontext=u:object_r:sysfs:s0 tclass=file permissive=1

[    5.877876] <0>.(1)[1:init]init: processing action (post-fs-data) from (/init.mt8173.rc:116)

[    5.877933] <0>.(1)[1:init]init: Command 'chown system system /persist' action=post-fs-data (/init.mt8173.rc:117) took 0ms and failed: lchown() failed: Read-only file system

[    5.877998] <0>.(1)[1:init]init: Command 'chmod 0771 /persist' action=post-fs-data (/init.mt8173.rc:118) took 0ms and failed: fchmodat() failed: Read-only file system

[    5.890417] <2>.(2)[1:init]init: Command 'mkdir /persistbackup' action=post-fs-data (/init.mt8173.rc:155) took 0ms and failed: mkdir() failed: Read-only file system

[    5.893093] <0>.(0)[213:logd.auditd]type=1400 audit(1554747623.100:19): avc: denied { setattr } for pid=1 comm="init" name="file" dev="sysfs" ino=16550 scontext=u:r:init:s0 tcontext=u:object_r:sysfs:s0 tclass=file permissive=1

[    5.895675] <0>.(0)[213:logd.auditd]type=1400 audit(1554747623.120:20): avc: denied { write } for pid=1 comm="init" name="wdk" dev="proc" ino=4026532996 scontext=u:r:init:s0 tcontext=u:object_r:proc:s0 tclass=file permissive=1

[    5.898306] <0>.(0)[213:logd.auditd]type=1400 audit(1554747623.120:20): avc: denied { write } for pid=1 comm="init" name="wdk" dev="proc" ino=4026532996 scontext=u:r:init:s0 tcontext=u:object_r:proc:s0 tclass=file permissive=1

[    5.900853] <0>.(0)[213:logd.auditd]type=1400 audit(1554747623.120:21): avc: denied { open } for pid=1 comm="init" path="/proc/wdk" dev="proc" ino=4026532996 scontext=u:r:init:s0 tcontext=u:object_r:proc:s0 tclass=file permissive=1

[    5.911323] <3>.(3)[1:init]init: starting service 'exec 7 (/system/bin/rm -f /cache/.ipoh.img)'...

[    5.913030] <3>.(3)[1:init]init: SVC_EXEC pid 222 (uid 0 gid 0+0 context default) started; waiting...

[    5.923394] <0>.(0)[213:logd.auditd]type=1400 audit(1554747623.120:21): avc: denied { open } for pid=1 comm="init" path="/proc/wdk" dev="proc" ino=4026532996 scontext=u:r:init:s0 tcontext=u:object_r:proc:s0 tclass=file permissive=1

[    5.923874] <0>.(3)[1:init]init: Service 'exec 7 (/system/bin/rm -f /cache/.ipoh.img)' (pid 222) exited with status 0 waiting took 0.011000 seconds

[    5.927748] <1>.(1)[213:logd.auditd]type=1400 audit(1554747623.150:22): avc: denied { dac_override } for pid=222 comm="rm" capability=1 scontext=u:r:toolbox:s0 tcontext=u:r:toolbox:s0 tclass=capability permissive=1

[    5.927857] <1>.(3)[1:init]init: processing action (post-fs-data) from (init.project.rc:21)

[    5.929096] <1>.(3)[1:init]init: processing action (post-fs-data) from (init.suez.usb.rc:26)

[    5.929268] <1>.(3)[1:init]init: processing action (post-fs-data) from (/system/etc/init/bootstat.rc:7)

[    5.930354] <1>.(2)[1:init]init: processing action (post-fs-data) from (/system/etc/init/incidentd.rc:21)

[    5.930653] <1>.(2)[1:init]init: processing action (post-fs-data) from (/system/etc/init/lineage-ssh.rc:1)

[    5.931566] <1>.(3)[1:init]init: processing action (post-fs-data) from (/system/etc/init/lineage-system.rc:6)

[    5.931966] <1>.(3)[1:init]init: starting service 'sysinit'...

[    5.932864] <1>.(3)[1:init]init: processing action (post-fs-data) from (/system/etc/init/lineage-updates.rc:1)

[    5.933560] <1>.(2)[1:init]init: processing action (post-fs-data) from (/system/etc/init/logtagd.rc:4)

[    5.934311] <1>.(2)[1:init]init: processing action (post-fs-data) from (/system/etc/init/sn.rc:1)

[    5.934507] <1>.(2)[1:init]init: processing action (post-fs-data) from (/system/etc/init/statsd.rc:25)

[    5.934934] <1>.(2)[1:init]init: processing action (post-fs-data) from (/vendor/etc/init/android.hardware.audio@2.0-service-mediatek.rc:1)

[    5.937209] <1>.(2)[1:init]init: processing action (post-fs-data) from (/vendor/etc/init/hostapd.android.rc:9)

[    5.939493] <1>.(2)[1:init]init: processing action (post-fs-data) from (/vendor/etc/init/trustkernel.rc:9)

[    5.939513] <1>.(3)[165:bat_thread_kthr]wait usb connection ready..

[    5.940064] <1>.(0)[172:init]BOOTPROF:      5940.056705:tkcore: prep SFS

[    5.943463] <1>.(0)[172:init]BOOTPROF:      5943.453320:tkcore: prep SPTA

[    5.945043] <1>.(2)[1:init]init: processing action (post-fs-data) from (/vendor/etc/init/vendor.mediatek.hardware.power@1.1-service.rc:1)

[    5.950893] <3>.(3)[213:logd.auditd]type=1400 audit(1554747623.150:22): avc: denied { dac_override } for pid=222 comm="rm" capability=1 scontext=u:r:toolbox:s0 tcontext=u:r:toolbox:s0 tclass=capability permissive=1

[    5.953290] <3>.(3)[213:logd.auditd]type=1400 audit(1554747623.170:23): avc: denied { write } for pid=172 comm="init" name="bootprof" dev="proc" ino=4026532259 scontext=u:r:vendor_init:s0 tcontext=u:object_r:proc:s0 tclass=file permissive=1

[    5.954257] <3>-(2)[223:sysinit]audit_log_lost: 21 callbacks suppressed

[    5.954261] <3>.(2)[223:sysinit]audit: audit_lost=8 audit_rate_limit=5 audit_backlog_limit=64

[    5.954265] <3>.(2)[223:sysinit]audit: rate limit exceeded

[    5.958705] <3>.(3)[213:logd.auditd]type=1400 audit(1554747623.170:23): avc: denied { write } for pid=172 comm="init" name="bootprof" dev="proc" ino=4026532259 scontext=u:r:vendor_init:s0 tcontext=u:object_r:proc:s0 tclass=file permissive=1

[    5.961662] <3>.(3)[213:logd.auditd]type=1400 audit(1554747623.170:24): avc: denied { setattr } for pid=172 comm="init" name="tee" dev="mmcblk0p15" ino=686785 scontext=u:r:vendor_init:s0 tcontext=u:object_r:system_data_file:s0 tclass=dir permissive=1

[    5.963242] <3>.(0)[1:init]init: processing action (ro.crypto.state=unencrypted && zygote-start) from (/init.rc:561)

[    5.963322] <3>.(0)[1:init]init: Command 'exec_start update_verifier_nonencrypted' action=ro.crypto.state=unencrypted && zygote-start (/init.rc:563) took 0ms and failed: Service not found

[    5.963780] <3>.(0)[1:init]init: starting service 'netd'...

[    5.965363] <3>.(0)[1:init]init: starting service 'zygote'...

[    5.966893] <3>.(0)[1:init]init: starting service 'zygote_secondary'...

[    5.968200] <3>.(0)[1:init]init: processing action (load_persist_props_action) from (/init.rc:269)

[    5.968318] <3>.(0)[1:init]init: Couldn't load property file '/data/local.prop': open() failed: No such file or directory: No such file or directory

[    5.968582] <3>.(2)[227:init]init: Created socket '/dev/socket/zygote_secondary', mode 660, user 0, group 1000

[    5.969780] <3>.(2)[226:init]init: Created socket '/dev/socket/zygote', mode 660, user 0, group 1000

[    5.970904] <3>.(2)[1:init]init: starting service 'logd-reinit'...

[    5.971826] <3>.(2)[1:init]init: processing action (load_persist_props_action) from (/system/etc/init/logcatd.rc:31)

[    5.972044] <3>.(2)[1:init]init: processing action (firmware_mounts_complete) from (/init.rc:275)

[    5.972111] <3>.(2)[1:init]init: processing action (early-boot) from (/system/etc/init/installd.rc:5)

[    5.980134] <2>.(2)[1:init]init: processing action (boot) from (/init.rc:582)

[    5.980404] <2>.(3)[225:init]init: Created socket '/dev/socket/netd', mode 660, user 0, group 1000

[    5.980713] <2>.(3)[225:init]init: Created socket '/dev/socket/dnsproxyd', mode 660, user 0, group 3003

[    5.980933] <2>.(3)[225:init]init: Created socket '/dev/socket/mdns', mode 660, user 0, group 1000

[    5.981176] <2>.(3)[225:init]init: Created socket '/dev/socket/fwmarkd', mode 660, user 0, group 3003

[    5.981414] <2>.(3)[213:logd.auditd]type=1400 audit(1554747623.170:24): avc: denied { setattr } for pid=172 comm="init" name="tee" dev="mmcblk0p15" ino=686785 scontext=u:r:vendor_init:s0 tcontext=u:object_r:system_data_file:s0 tclass=dir permissive=1

[    5.981433] <2>.(3)[213:logd.auditd]type=1400 audit(1554747623.170:25): avc: denied { getattr } for pid=223 comm="sysinit" path="/system/bin/sh" dev="mmcblk0p13" ino=558 scontext=u:r:sysinit:s0 tcontext=u:object_r:shell_exec:s0 tclass=file permissive=1

[    5.982001] <2>.(3)[213:logd.auditd]type=1400 audit(1554747623.170:25): avc: denied { getattr } for pid=223 comm="sysinit" path="/system/bin/sh" dev="mmcblk0p13" ino=558 scontext=u:r:sysinit:s0 tcontext=u:object_r:shell_exec:s0 tclass=file permissive=1

[    5.982011] <2>.(3)[213:logd.auditd]type=1400 audit(1554747623.180:26): avc: denied { read } for pid=223 comm="sysinit" path="/system/bin/sh" dev="mmcblk0p13" ino=558 scontext=u:r:sysinit:s0 tcontext=u:object_r:shell_exec:s0 tclass=file permissive=1

[    5.990577] <2>.(1)[204:logd.daemon]logd.daemon: reinit

[    5.997723] <2>.(2)[1:init]init: Service 'logd-reinit' (pid 229) exited with status 0

[    6.001561] <3>.(3)[1:init]init: starting service 'hidl_memory'...

[    6.003419] <3>.(3)[1:init]init: starting service 'healthd'...

[    6.005251] <3>.(3)[1:init]init: File /vendor/bin/hw/android.hardware.audio@2.0-service-mediatek(labeled "u:object_r:vendor_file:s0") has incorrect label or no domain transition from u:r:init:s0 to another SELinux domain defined. Have you configured your service correctly? https://source.android.com/security/selinux/device-policy#label_new_services_and_address_denials

[    6.009324] <3>.(3)[1:init]init: starting service 'audio-hal-2-0'...

[    6.011119] <3>.(3)[1:init]init: File /vendor/bin/hw/android.hardware.bluetooth@1.0-service-mediatek(labeled "u:object_r:vendor_file:s0") has incorrect label or no domain transition from u:r:init:s0 to another SELinux domain defined. Have you configured your service correctly? https://source.android.com/security/selinux/device-policy#label_new_services_and_address_denials

[    6.015247] <3>.(3)[1:init]init: starting service 'bluetooth-1-0'...

[    6.017041] <3>.(3)[1:init]init: starting service 'vendor.cas-hal-1-0'...

[    6.018937] <3>.(3)[1:init]init: starting service 'vendor.configstore-hal'...

[    6.020918] <3>.(3)[1:init]init: starting service 'vendor.drm-hal-1-0'...

[    6.022818] <3>.(3)[1:init]init: File /vendor/bin/hw/android.hardware.drm@1.0-service.widevine(labeled "u:object_r:vendor_file:s0") has incorrect label or no domain transition from u:r:init:s0 to another SELinux domain defined. Have you configured your service correctly? https://source.android.com/security/selinux/device-policy#label_new_services_and_address_denials

[    6.026879] <3>.(3)[1:init]init: starting service 'drm-widevine-hal-1-0'...

[    6.028708] <3>.(3)[1:init]init: starting service 'vendor.gatekeeper-1-0'...

[    6.030774] <3>.(3)[1:init]init: starting service 'vendor.gralloc-2-0'...

[    6.032743] <3>.(3)[1:init]init: starting service 'vendor.hwcomposer-2-1'...

[    6.034592] <3>.(3)[1:init]init: File /vendor/bin/hw/android.hardware.light@2.0-service-mediatek(labeled "u:object_r:vendor_file:s0") has incorrect label or no domain transition from u:r:init:s0 to another SELinux domain defined. Have you configured your service correctly? https://source.android.com/security/selinux/device-policy#label_new_services_and_address_denials

[    6.038678] <3>.(3)[1:init]init: starting service 'light-hal-2-0'...

[    6.040696] <2>.(2)[1:init]init: starting service 'vendor.memtrack-hal-1-0'...

[    6.042663] <2>.(2)[1:init]init: starting service 'vendor.wifi_hal_legacy'...

[    6.044671] <2>.(2)[1:init]init: File /vendor/bin/hw/vendor.mediatek.hardware.mtkcodecservice@1.1-service(labeled "u:object_r:vendor_file:s0") has incorrect label or no domain transition from u:r:init:s0 to another SELinux domain defined. Have you configured your service correctly? https://source.android.com/security/selinux/device-policy#label_new_services_and_address_denials

[    6.048846] <2>.(2)[1:init]init: starting service 'mtkcodecservice-1-1'...

[    6.049505] <2>.(3)[165:bat_thread_kthr]wait usb connection ready..

[    6.051595] <2>.(2)[1:init]init: File /vendor/bin/hw/vendor.mediatek.hardware.power@1.1-service(labeled "u:object_r:vendor_file:s0") has incorrect label or no domain transition from u:r:init:s0 to another SELinux domain defined. Have you configured your service correctly? https://source.android.com/security/selinux/device-policy#label_new_services_and_address_denials

[    6.055668] <2>.(2)[1:init]init: starting service 'power-hal-1-1'...

[    6.057310] <2>.(2)[1:init]init: Command 'class_start hal' action=boot (/init.rc:677) took 56ms and succeeded

[    6.058640] <2>.(2)[1:init]init: Could not start service 'bootlogoupdater' as part of class 'core': Cannot find '/system/bin/boot_logo_updater': No such file or directory

[    6.060634] <2>.(2)[1:init]init: Could not start service 'autokd' as part of class 'core': Cannot find '/system/bin/autokd': No such file or directory

[    6.062389] <2>.(2)[1:init]init: Could not start service 'pvrsrvctl' as part of class 'core': Cannot find '/system/vendor/bin/pvrsrvctl': No such file or directory

[    6.064240] <2>.(2)[1:init]init: Could not start service 'wmtLoader' as part of class 'core': Cannot find '/system/bin/wmt_loader': No such file or directory

[    6.066026] <2>.(2)[1:init]init: Could not start service '66xx_launcher' as part of class 'core': Cannot find '/system/bin/6620_launcher': No such file or directory

[    6.068112] <2>.(2)[1:init]init: starting service 'audioserver'...

[    6.070081] <2>.(2)[1:init]init: starting service 'lmkd'...

[    6.071880] <2>.(2)[1:init]init: starting service 'surfaceflinger'...

[    6.072086] <2>.(3)[253:init]init: Created socket '/dev/socket/lmkd', mode 660, user 1000, group 1000

[    6.074733] <3>.(3)[254:init]init: Failed to bind socket 'pdx/system/vr/display/client': No such file or directory

[    6.074736] <3>.(2)[1:init]init: starting service 'thermalservice'...

[    6.075774] <3>.(2)[1:init]init: File /vendor/bin/wmt_loader(labeled "u:object_r:vendor_file:s0") has incorrect label or no domain transition from u:r:init:s0 to another SELinux domain defined. Have you configured your service correctly? https://source.android.com/security/selinux/device-policy#label_new_services_and_address_denials

[    6.075782] <3>.(2)[1:init]init: starting service 'wmt_loader'...

[    6.076628] <3>.(2)[1:init]init: File /vendor/bin/wmt_launcher(labeled "u:object_r:vendor_file:s0") has incorrect label or no domain transition from u:r:init:s0 to another SELinux domain defined. Have you configured your service correctly? https://source.android.com/security/selinux/device-policy#label_new_services_and_address_denials

[    6.076635] <3>.(2)[1:init]init: starting service 'wmt_launcher'...

[    6.077597] <3>.(2)[1:init]init: File /vendor/bin/teed(labeled "u:object_r:vendor_file:s0") has incorrect label or no domain transition from u:r:init:s0 to another SELinux domain defined. Have you configured your service correctly? https://source.android.com/security/selinux/device-policy#label_new_services_and_address_denials

[    6.077605] <3>.(2)[1:init]init: starting service 'teed'...

[    6.078253] <3>.(2)[1:init]init: processing action (boot) from (/init.usb.rc:21)

[    6.078445] <3>.(2)[1:init]init: processing action (persist.sys.usb.config=* && boot) from (/init.usb.rc:102)

[    6.078483] <3>.(2)[1:init]init: processing action (boot) from (/init.mt8173.rc:607)

[    6.078532] <3>.(2)[1:init]init: Command 'start xlogboot' action=boot (/init.mt8173.rc:610) took 0ms and failed: service xlogboot not found

[    6.080884] <3>.(2)[1:init]init: processing action (boot) from (/init.mt8173.rc:1371)

[    6.096017] <3>.(3)[254:init]init: Failed to bind socket 'pdx/system/vr/display/manager': No such file or directory

[    6.097535] <3>.(3)[254:init]init: Failed to bind socket 'pdx/system/vr/display/vsync': No such file or directory

[    6.100320] <3>.(3)[1:init]init: Service 'teed' (pid 258) exited with status 253

[    6.101244] <3>.(3)[1:init]init: Sending signal 9 to service 'teed' (pid 258) process group...

[    6.102400] <3>.(3)[1:init]libprocessgroup: Successfully killed process cgroup uid 1000 pid 258 in 0ms

[    6.159479] <2>.(2)[165:bat_thread_kthr]wait usb connection ready..

[    6.269527] <1>.(1)[165:bat_thread_kthr]wait usb connection ready..

[    6.379507] <3>.(3)[165:bat_thread_kthr]wait usb connection ready..

[    6.489489] <2>.(2)[165:bat_thread_kthr]wait usb connection ready..

[    6.599517] <1>.(1)[165:bat_thread_kthr]wait usb connection ready..

[    6.709516] <3>.(3)[165:bat_thread_kthr]wait usb connection ready..

[    6.723682] <0>.(0)[256:wmt_loader][WMT-DETECT][I]wmt_detect_open:open major 154 minor 0 (pid 256)

[    6.725482] <0>.(0)[256:wmt_loader][WMT-DETECT][I]wmt_detect_unlocked_ioctl:cmd (-2147191034),arg(4)

[    6.726632] <0>.(0)[256:wmt_loader][WMT-DETECT][I]wmt_detect_ext_chip_pwr_on:++

[    6.727961] <0>.(0)[256:wmt_loader][WMT-DETECT][I]wmt_detect_dump_pin_conf:LDO(GPIO-1), PMU(GPIO897), PMUV28(GPIO-1)

[    6.729286] <0>.(0)[256:wmt_loader]------------[ cut here ]------------

[    6.730178] <0>.(0)[256:wmt_loader]WARNING: CPU: 0 PID: 256 at ../../../../../../kernel/amazon/suez/drivers/gpio/gpiolib.c:68 gpio_to_desc+0x4c/0x58()

[    6.731875] <0>.(0)[256:wmt_loader]invalid GPIO -1

[    6.732480] Modules linked in:

[    6.732861] <0>.(0)[256:wmt_loader]CPU: 0 PID: 256 Comm: wmt_loader Tainted: G S      W      3.18.19+ #2

[    6.734056] <0>.(0)[256:wmt_loader]Hardware name: MT8173 (DT)

[    6.734765] <0>.(0)[256:wmt_loader]Call trace:

[    6.735341] <0>.(0)[256:wmt_loader][<ffffffc000087938>] dump_backtrace+0x0/0x124

[    6.736279] <0>.(0)[256:wmt_loader][<ffffffc000087a6c>] show_stack+0x10/0x1c

[    6.737177] <0>.(0)[256:wmt_loader][<ffffffc000a043d0>] dump_stack+0x74/0xb8

[    6.738071] <0>.(0)[256:wmt_loader][<ffffffc000098c10>] warn_slowpath_fmt+0xb4/0xd8

[    6.739040] <0>.(0)[256:wmt_loader][<ffffffc000317644>] gpio_to_desc+0x48/0x58

[    6.739826] <0>.(1)[122:kworker/1:1][cmb_stub] thermal_ctrl_cb null

[    6.740901] <0>.(0)[256:wmt_loader][<ffffffc000522d50>] wmt_detect_chip_pwr_ctrl+0x1c0/0x220

[    6.741961] <0>.(0)[256:wmt_loader][<ffffffc000521ddc>] wmt_detect_ext_chip_pwr_on+0x1c/0x64

[    6.743022] <0>.(0)[256:wmt_loader][<ffffffc0005222e4>] wmt_detect_unlocked_ioctl+0x2e8/0x338

[    6.744092] <0>.(0)[256:wmt_loader][<ffffffc0001a7bd0>] do_vfs_ioctl+0x350/0x57c

[    6.745026] <0>.(0)[256:wmt_loader][<ffffffc0001a7e7c>] SyS_ioctl+0x80/0x98

[    6.745921] <3>.(3)[256:wmt_loader]---[ end trace 2f8320430276cd9a ]---

[    6.746741] <3>.(3)[256:wmt_loader][WMT-DETECT][I]wmt_detect_dump_pin_conf:RST(GPIO927), BGF_EINT(GPIO-1), BGF_EINT_NUM(-22)

[    6.748140] <3>.(3)[256:wmt_loader][WMT-DETECT][I]wmt_detect_dump_pin_conf:WIFI_EINT(GPIO891), WIFI_EINT_NUM(102)

[    6.819492] <2>.(2)[165:bat_thread_kthr]wait usb connection ready..

[    6.819553] <2>.(0)[171:vcorefs][VcoreFS] vcorefs_kthread[696], vcore_dvfs_before_late_init=1, dtcm_ready=0, md32_mobile_log_ready=0

[    6.833168] <1>.(1)[232:healthd]healthd: BatteryCurrentNowPath not found

[    6.834035] <1>.(1)[232:healthd]healthd: BatteryFullChargePath not found

[    6.842764] <3>.(3)[232:healthd]healthd: BatteryCycleCountPath not found

[    6.845364] <3>.(3)[232:healthd]healthd: battery l=84 v=4129 t=24.0 h=2 st=3 chg=

[    6.849668] <2>-(2)[256:wmt_loader]mtk_rtc_hal: RTC_GPIO user 9 enable = 1 32k (0x200)

[    6.890008] <2>.(2)[156:PTP_CTRL_GPU]vgpu: unsupportable voltage range: 700000-9999uV

[    6.890987] <2>.(2)[156:PTP_CTRL_GPU][GPU_DVFS] mt_gpu_volt_switch: fail to set voltage 0xFFFFFFEA (1000 -> 0)

[    6.929514] <1>.(1)[165:bat_thread_kthr]wait usb connection ready..

[    6.940158] <1>.(1)[213:logd.auditd]type=1400 audit(1554747623.180:26): avc: denied { read } for pid=223 comm="sysinit" path="/system/bin/sh" dev="mmcblk0p13" ino=558 scontext=u:r:sysinit:s0 tcontext=u:object_r:shell_exec:s0 tclass=file permissive=1

[    6.942959] <1>.(1)[213:logd.auditd]type=1400 audit(1554747624.170:78): avc: denied { execute } for pid=276 comm="sysinit" name="sh" dev="mmcblk0p13" ino=558 scontext=u:r:sysinit:s0 tcontext=u:object_r:shell_exec:s0 tclass=file permissive=1

[    6.946081] <1>.(1)[213:logd.auditd]type=1400 audit(1554747624.170:78): avc: denied { execute } for pid=276 comm="sysinit" name="sh" dev="mmcblk0p13" ino=558 scontext=u:r:sysinit:s0 tcontext=u:object_r:shell_exec:s0 tclass=file permissive=1

[    6.948781] <1>.(1)[213:logd.auditd]type=1400 audit(1554747624.170:79): avc: denied { read open } for pid=276 comm="sysinit" path="/system/bin/sh" dev="mmcblk0p13" ino=558 scontext=u:r:sysinit:s0 tcontext=u:object_r:shell_exec:s0 tclass=file permissive=1

[    6.956561] <2>.(2)[213:logd.auditd]type=1400 audit(1554747624.170:79): avc: denied { read open } for pid=276 comm="sysinit" path="/system/bin/sh" dev="mmcblk0p13" ino=558 scontext=u:r:sysinit:s0 tcontext=u:object_r:shell_exec:s0 tclass=file permissive=1

[    6.959517] <2>.(2)[213:logd.auditd]type=1400 audit(1554747624.170:80): avc: denied { getattr } for pid=276 comm="90userinit" path="/system/bin/sh" dev="mmcblk0p13" ino=558 scontext=u:r:sysinit:s0 tcontext=u:object_r:shell_exec:s0 tclass=file permissive=1

[    7.010898] <0>-(0)[0:swapper/0]random: nonblocking pool is initialized

[    7.039507] <0>.(0)[165:bat_thread_kthr]wait usb connection ready..

[    7.059493] <2>.(2)[256:wmt_loader]mtk_wcn_cmb_sdio_off (1)

[    7.060450] [sd]msdc3 -> USR Suspend

[    7.060960] <2>.(2)[256:wmt_loader]mtk_wcn_cmb_sdio_on (1)

[    7.061911] [sd]msdc3 -> USR Resume

[    7.062538] <2>.(2)[256:wmt_loader][sd]msdc3 drving<clk 3,cmd 3,dat 3>[    7.063342] <2>.(2)[256:wmt_loader][sd]msdc3 -> No power control, host_function<0x2> & Power_domain<0> <- msdc_set_power_mode() : L<2404> PID<wmt_loader><0x100>

[    7.089693] <3>.(3)[256:wmt_loader][sd]msdc3 Set<400K> src:<200000K> sclk:<400K> timing<0> mode:0 div:125 cfg:0x207d99

[    7.109520] <3>.(3)[256:wmt_loader][WMT-DETECT][I]wmt_detect_unlocked_ioctl:cmd (-2147191038),arg(0)

[    7.110661] <3>.(3)[256:wmt_loader][WMT-DETECT][I]wmt_detect_ext_chip_detect:++

[    7.116896] <3>.(3)[6:kworker/u8:0]mmc2: cannot verify signal voltage switch

[    7.119065] [sd]msdc3 -> !!! Set<0 Hz>

[    7.119593] <3>.(3)[6:kworker/u8:0][sd]msdc3 -> [msdc_ops_switch_volt]msdc3 ERROR: No power switch callback,L6790

[    7.119593] <3> <- msdc_ops_switch_volt() : L<6790> PID<kworker/u8:0><0x6>

[    7.132350] <3>.(3)[6:kworker/u8:0][sd]msdc3 Set<260K> src:<200000K> sclk:<259K> timing<0> mode:0 div:193 cfg:0x20c199

[    7.139504] <2>.(2)[256:wmt_loader][WMT-DETECT][E]wmt_detect_read_ext_cmb_status(185):WMT-DETECT: WIFI_EINT input status:1

[    7.140905] <2>.(2)[256:wmt_loader][WMT-DETECT][I]wmt_detect_ext_chip_detect:external combo chip detected

[    7.149556] <0>.(0)[165:bat_thread_kthr]wait usb connection ready..

[    7.179896] <1>.(1)[243:android.hardwar]audit: audit_lost=59 audit_rate_limit=5 audit_backlog_limit=64

[    7.180245] <1>.(2)[213:logd.auditd]type=1400 audit(1554747624.170:80): avc: denied { getattr } for pid=276 comm="90userinit" path="/system/bin/sh" dev="mmcblk0p13" ino=558 scontext=u:r:sysinit:s0 tcontext=u:object_r:shell_exec:s0 tclass=file permissive=1

[    7.180261] <1>.(2)[213:logd.auditd]type=1400 audit(1554747624.410:81): avc: denied { read } for pid=243 comm="android.hardwar" name="ged" dev="proc" ino=4026532287 scontext=u:r:hal_graphics_composer_default:s0 tcontext=u:object_r:proc:s0 tclass=file permissive=1

[    7.180389] <1>.(2)[213:logd.auditd]type=1400 audit(1554747624.410:81): avc: denied { read } for pid=243 comm="android.hardwar" name="ged" dev="proc" ino=4026532287 scontext=u:r:hal_graphics_composer_default:s0 tcontext=u:object_r:proc:s0 tclass=file permissive=1

[    7.180396] <1>.(2)[213:logd.auditd]type=1400 audit(1554747624.410:82): avc: denied { open } for pid=243 comm="android.hardwar" path="/proc/ged" dev="proc" ino=4026532287 scontext=u:r:hal_graphics_composer_default:s0 tcontext=u:object_r:proc:s0 tclass=file permissive=1

[    7.192763] <1>.(1)[243:android.hardwar]audit: rate limit exceeded

[    7.199018] <1>.(1)[243:android.hardwar][DISP][mtk_disp_mgr_ioctl #2216]ERROR:[session]ioctl not supported, 0x403c4fda

[    7.259584] <0>.(0)[165:bat_thread_kthr]wait usb connection ready..

[    7.265505] <0>.(0)[1:init]init: Command 'setprop persist.radio.reset_on_switch true' action=boot (/init.mt8173.rc:1391) took 1161ms and succeeded

[    7.267374] <0>.(0)[1:init]init: Service 'sysinit' (pid 223) exited with status 0

[    7.268573] <0>.(0)[1:init]init: Service 'audio-hal-2-0' (pid 233) exited with status 1

[    7.271917] <0>.(0)[1:init]init: Received control message 'interface_start' for 'android.hardware.audio@4.0::IDevicesFactory/default' from pid: 202 (/system/bin/hwservicemanager)

[    7.273489] <0>.(1)[290:crash_dump64]DEBUG: *** *** *** *** *** *** *** *** *** *** *** *** *** *** *** ***

[    7.273617] <0>.(1)[290:crash_dump64]DEBUG: LineageOS Version: '16.0-20190407-UNOFFICIAL-suez'

[    7.273657] <0>.(1)[290:crash_dump64]DEBUG: Build fingerprint: 'Android/lineage_suez/suez:9/PQ2A.190305.002/chaosmaster04071513:eng/test-keys'

[    7.273684] <0>.(1)[290:crash_dump64]DEBUG: Revision: '0'

[    7.273710] <0>.(1)[290:crash_dump64]DEBUG: ABI: 'arm64'

[    7.273751] <0>.(1)[290:crash_dump64]DEBUG: pid: 243, tid: 243, name: android.hardwar  >>> /vendor/bin/hw/android.hardware.graphics.composer@2.1-service <<<

[    7.273783] <0>.(1)[290:crash_dump64]DEBUG: signal 6 (SIGABRT), code -6 (SI_TKILL), fault addr --------

[    7.273833] <0>.(1)[290:crash_dump64]DEBUG:     x0  0000000000000000  x1  00000000000000f3  x2  0000000000000006  x3  0000000000000008

[    7.273869] <0>.(1)[290:crash_dump64]DEBUG:     x4  0000000000000002  x5  0000000000000002  x6  0000000000000002  x7  0000000000000030

[    7.273915] <0>.(1)[290:crash_dump64]DEBUG:     x8  0000000000000083  x9  bca3e11a3a7f43c1  x10 0000000000000000  x11 fffffffc7fffffdf

[    7.273952] <0>.(1)[290:crash_dump64]DEBUG:     x12 0000000000000001  x13 0000000000000047  x14 0000000000000000  x15 0000007feeb6b7b8

[    7.273987] <0>.(1)[290:crash_dump64]DEBUG:     x16 0000007f99b722a0  x17 0000007f99ab00e4  x18 0000000000000001  x19 00000000000000f3

[    7.274025] <0>.(1)[290:crash_dump64]DEBUG:     x20 00000000000000f3  x21 0000007f9a2435e0  x22 0000007f983ed2e8  x23 0000007f9a1d7636

[    7.274061] <0>.(1)[290:crash_dump64]DEBUG:     x24 0000007f9a1db054  x25 0000007f9a2435e0  x26 0000007f9a23f430  x27 0000000000000008

[    7.274096] <0>.(1)[290:crash_dump64]DEBUG:     x28 0000007f983803c8  x29 0000007feeb6bd90

[    7.274129] <0>.(1)[290:crash_dump64]DEBUG:     sp  0000007feeb6bd50  lr  0000007f99aa4c10  pc  0000007f99aa4c38

[    7.295204] <0>.(0)[1:init]init: Could not find service hosting interface android.hardware.audio@4.0::IDevicesFactory/default

[    7.296261] <0>.(2)[6:kworker/u8:0][sd]msdc3 Set<400K> src:<200000K> sclk:<400K> timing<0> mode:0 div:125 cfg:0x207dd9

[    7.298358] <0>.(0)[1:init][sd]msdc3 select card<0x00010000>

[    7.298360] <0>.(0)[1:init]init: Received control message 'interface_start' for 'android.hardware.audio@2.0::IDevicesFactory/default' from pid: 202 (/system/bin/hwservicemanager)

[    7.301171] <0>.(0)[1:init]init: Could not find service hosting interface android.hardware.audio@2.0::IDevicesFactory/default

[    7.302913] <0>.(0)[1:init]init: Command 'chown root /system/bin/pppd' action=boot (/init.mt8173.rc:1400) took 0ms and failed: lchown() failed: Read-only file system

[    7.305127] <0>.(0)[1:init]init: Received control message 'interface_start' for 'android.hardware.audio@2.0::IDevicesFactory/default' from pid: 202 (/system/bin/hwservicemanager)

[    7.307191] <0>.(0)[1:init]init: Could not find service hosting interface android.hardware.audio@2.0::IDevicesFactory/default

[    7.308816] <0>.(0)[1:init]init: Command 'chmod 4755 /system/bin/pppd' action=boot (/init.mt8173.rc:1401) took 0ms and failed: fchmodat() failed: Read-only file system

[    7.311100] <0>.(0)[1:init]init: Received control message 'interface_start' for 'android.hardware.health@1.0::IHealth/default' from pid: 202 (/system/bin/hwservicemanager)

[    7.312766] <0>.(2)[6:kworker/u8:0][sd]msdc3 Set<200000K> src:<200000K> sclk:<200000K> timing<6> mode:1 div:0 cfg:0x2100d9

[    7.312770] <0>.(2)[6:kworker/u8:0][sd][AUTOK]Execute Tuning: hz:200000000, flag:0

[    7.312772] <0>.(2)[6:kworker/u8:0][sd][AUTOK] status [vol:1125000] [hv:0] [lv:0]

[    7.312775] <0>.(2)[6:kworker/u8:0][VcoreFS] vcorefs_sdio_lock_dvfs[871], sdio lock: lock = 0, curr_index = 0

[    7.312778] <0>.(2)[6:kworker/u8:0][VcoreFS] vcorefs_sdio_set_vcore_nml[895], sdio set: lock = 1, nml = 0x44, curr_nml = 0x44

[    7.313799] <0>.(2)[6:kworker/u8:0][AUTOK]CMD_EDGE 	 CKGEN 	 CMD_RESP_RD_DLY

[    7.320145] <0>.(0)[1:init]init: Could not find service hosting interface android.hardware.health@1.0::IHealth/default

[    7.320529] <0>.(2)[6:kworker/u8:0][AUTOK]1	 0	 18	 OOOOOOOXXXXXXXOOOOOOOOOOOOOOOOOO S < (tt

[    7.320533] <0>.(2)[6:kworker/u8:0][AUTOK] FB Found CKG:0, S:7, E:13, W:7, Edge:1, PadDdly:0

[    7.321548] <0>.(2)[6:kworker/u8:0][AUTOK]CMD_EDGE 	 CKGEN 	 CMD_RESP_RD_DLY

[    7.325639] <0>.(0)[1:init]init: Received control message 'interface_start' for 'android.hardware.thermal@1.1::IThermal/default' from pid: 202 (/system/bin/hwservicemanager)

[    7.327655] <0>.(0)[1:init]init: Could not find service hosting interface android.hardware.thermal@1.1::IThermal/default

[    7.328449] <0>.(2)[6:kworker/u8:0][AUTOK]0 	 4 	 15 	 OOOOOOOOOOOOOOOXXXXXXXXXXOOOOOOO S < (tt

[    7.328451] <0>.(2)[6:kworker/u8:0][AUTOK] 1T Cycle Count calc: 52

[    7.329469] <0>.(2)[6:kworker/u8:0][AUTOK]CMD_EDGE 	 CKGEN 	 CMD_RD_D_DLY

[    7.333745] <0>.(0)[1:init]init: processing action (boot) from (init.project.rc:17)

[    7.335258] <0>.(0)[1:init]init: processing action (boot) from (init.suez.usb.rc:1)

[    7.337005] <2>.(2)[6:kworker/u8:0][AUTOK]0 	 0 	 13 	 OOOOOOOOOOOOOXXXXXXXOOOOOOOOOOOO S < (tt

[    7.338305] <2>.(2)[6:kworker/u8:0][AUTOK] ------Record Pad Boundary info-------------

[    7.339095] <2>.(0)[1:init]init: processing action (boot) from (/system/etc/init/bootstat.rc:61)

[    7.339181] <2>.(0)[1:init]init: processing action (boot) from (/system/etc/init/dumpstate.rc:1)

[    7.339342] <2>.(0)[1:init]init: processing action (boot) from (/system/etc/init/ged_srv.rc:12)

[    7.339863] <2>.(0)[1:init]init: processing action (boot) from (/system/etc/init/lineage-governor.rc:1)

[    7.341480] <2>.(0)[1:init]init: processing action (boot) from (/system/etc/init/lineage-iosched.rc:16)

[    7.342394] <2>.(0)[1:init]selinux: SELinux: Could not get canonical path for /sys/block/sda/queue restorecon: No such file or directory.

[    7.342394] <2>

[    7.342497] <2>.(0)[1:init]selinux: SELinux: Could not get canonical path for /sys/block/sde/queue restorecon: No such file or directory.

[    7.342497] <2>

[    7.342579] <2>.(0)[1:init]selinux: SELinux: Could not get canonical path for /sys/block/dm-0/queue restorecon: No such file or directory.

[    7.342579] <2>

[    7.342674] <2>.(0)[1:init]init: processing action (boot) from (/system/etc/init/lineage-livedisplay.rc:1)

[    7.343016] <2>.(0)[1:init]init: processing action (boot) from (/system/etc/init/lineage-system.rc:16)

[    7.343313] <2>.(0)[1:init]init: Command 'mkdir /persist/properties 0770 system system' action=boot (/system/etc/init/lineage-system.rc:18) took 0ms and failed: mkdir() failed: Read-only file system

[    7.343343] <2>.(0)[1:init]init: processing action (boot) from (/system/etc/init/lineage-tcp.rc:1)

[    7.343623] <2>.(0)[1:init]init: processing action (boot) from (/vendor/etc/init/init.wmt_drv.rc:1)

[    7.357070] <2>.(2)[6:kworker/u8:0][AUTOK] FB Found CKG:0, Start:13, End:19, Width:7, Edge:0, IndDly:0

[    7.358232] <2>.(2)[6:kworker/u8:0][AUTOK] Boundary Mid Pos:36, at edge: 0

[    7.359098] <2>.(2)[6:kworker/u8:0][AUTOK] Boundary Mid Pos:10, at edge: 1

[    7.359976] <2>.(2)[6:kworker/u8:0][AUTOK] Dly Sel Res for Rising edge: 10, Margin Lost:0

[    7.360995] <2>.(2)[6:kworker/u8:0][AUTOK] Dly Sel Res for Falling edge: 31, Margin Lost:5

[    7.362037] <2>.(2)[6:kworker/u8:0][AUTOK] CMD Edge Sel: 0, CMD Int Delay Sel: 10

[    7.362981] <2>.(2)[6:kworker/u8:0][AUTOK] Boundary Mid Pos:16, at edge: 0

[    7.363849] <2>.(2)[6:kworker/u8:0][sd][AUTOK] Dly Sel Res for Rising edge: 0, Margin Lost:9

[    7.364911] <2>.(2)[6:kworker/u8:0][AUTOK]CMD Pad Delay Sel: 0

[    7.366663] <2>.(2)[6:kworker/u8:0][AUTOK]CKGEN 	 [CMD_EDGE 	 CMD_RESP_RD_DLY	 CMD_RD_D_DLY] 	 DAT_RD_D_DLY

[    7.367877] <2>.(2)[6:kworker/u8:0][sd][AUTOK] Dly Sel Res for Rising edge: 0, Margin Lost:9

[    7.373442] <2>.(2)[6:kworker/u8:0][AUTOK]0  	  [0  	  10  	  0]  	 13  	  OOOOOOOOOOOOOXXXXXXXXXXXOOOOOOOO S < (tt

[    7.374951] <2>.(2)[6:kworker/u8:0][AUTOK] -------------Record Read Pad Boundary info-------------

[    7.376077] <2>.(2)[6:kworker/u8:0][AUTOK] FB Found CKG:0, Start:13, End:23, Width:11

[    7.377064] <2>.(2)[6:kworker/u8:0][AUTOK] Boundary Mid Pos:18, at edge: 0

[    7.377931] <2>.(2)[6:kworker/u8:0][sd][AUTOK] Dly Sel Res for Rising edge: 0, Margin Lost:7

[    7.378995] <2>.(2)[6:kworker/u8:0][AUTOK]Data Pad Delay Sel: 0

[    7.379536] <2>.(0)[165:bat_thread_kthr]wait usb connection ready..

[    7.381544] <2>.(2)[6:kworker/u8:0][AUTOK]WCRC Int Delay Sel: 10

[    7.384312] <2>.(2)[6:kworker/u8:0][sd][AUTOK]INT_LATCH_CK: 24 	 OOXXXXXX

[    7.385157] <2>.(2)[6:kworker/u8:0][AUTOK]LatchCK Delay Sel: 0

[    7.385893] <2>.(2)[6:kworker/u8:0][sd][AUTOK]=================ONLINE TUNE RESULT=================

[    7.387032] <2>.(2)[6:kworker/u8:0][AUTOK]param CMD_EDGE:0

[    7.387739] <2>.(2)[6:kworker/u8:0][AUTOK]param RDATA_EDGE:0

[    7.388447] <2>.(2)[6:kworker/u8:0][AUTOK]param WDATA_EDGE:0

[    7.389158] <2>.(2)[6:kworker/u8:0][AUTOK]param CMD_RD_D_DLY:0

[    7.389913] <2>.(2)[6:kworker/u8:0][AUTOK]param DAT0_RD_D_DLY:0

[    7.390651] <2>.(2)[6:kworker/u8:0][AUTOK]param DAT1_RD_D_DLY:0

[    7.391399] <2>.(2)[6:kworker/u8:0][AUTOK]param DAT2_RD_D_DLY:0

[    7.392147] <2>.(2)[6:kworker/u8:0][AUTOK]param DAT3_RD_D_DLY:0

[    7.392895] <2>.(2)[6:kworker/u8:0][AUTOK]param DAT_RD_DLY:0

[    7.393611] <2>.(2)[6:kworker/u8:0][AUTOK]param DAT_WRD_DLY:10

[    7.394348] <2>.(2)[6:kworker/u8:0][AUTOK]param CMD_RESP_RD_DLY:10

[    7.395130] <2>.(2)[6:kworker/u8:0][AUTOK]param CKGEN_MSDC_DLY_SEL:0

[    7.395932] <2>.(2)[6:kworker/u8:0][AUTOK]param INT_DAT_LATCH_CK:0

[    7.397728] <2>.(2)[6:kworker/u8:0][sd][AUTOK] cur_vol:1125000, hv_done:1, lv_done:0

[    7.398683] <2>.(2)[6:kworker/u8:0][sd][AUTOK] tune vol:1125000 rst:0

[    7.399498] <2>.(2)[6:kworker/u8:0][VcoreFS] vcorefs_sdio_unlock_dvfs[928], sdio unlock: lock = 1

[    7.400596] <2>.(2)[6:kworker/u8:0][VcoreFS] kick_dvfs_by_index[653], 0 kick: lock = 1, index = 1, curr_index = 0 (0)

[    7.401920] <2>.(2)[6:kworker/u8:0][VcoreFS] kick_dvfs_by_index[655], vcore_dvfs_before_late_init=1, dtcm_ready=0, md32_mobile_log_ready=0

[    7.403471] <2>.(2)[6:kworker/u8:0][VcoreFS] vcorefs_sdio_lock_dvfs[871], sdio lock: lock = 0, curr_index = 0

[    7.404705] <2>.(2)[6:kworker/u8:0][VcoreFS] vcorefs_sdio_set_vcore_nml[895], sdio set: lock = 1, nml = 0x30, curr_nml = 0x44

[    7.406116] <2>.(2)[6:kworker/u8:0][VcoreFS] kick_dvfs_by_index[653], 1 kick: lock = 1, index = 1, curr_index = 0 (0)

[    7.407437] <2>.(2)[6:kworker/u8:0][VcoreFS] kick_dvfs_by_index[655], vcore_dvfs_before_late_init=1, dtcm_ready=0, md32_mobile_log_ready=0

[    7.408988] <2>.(2)[6:kworker/u8:0][VcoreFS] vcorefs_sdio_unlock_dvfs[928], sdio unlock: lock = 1

[    7.410109] <2>.(2)[6:kworker/u8:0][VcoreFS] kick_dvfs_by_index[653], 0 kick: lock = 1, index = 1, curr_index = 0 (0)

[    7.411431] <2>.(2)[6:kworker/u8:0][VcoreFS] kick_dvfs_by_index[655], vcore_dvfs_before_late_init=1, dtcm_ready=0, md32_mobile_log_ready=0

[    7.412981] <2>.(2)[6:kworker/u8:0][VcoreFS] vcorefs_sdio_lock_dvfs[871], sdio lock: lock = 0, curr_index = 0

[    7.414217] <2>.(2)[6:kworker/u8:0][VcoreFS] vcorefs_sdio_set_vcore_nml[895], sdio set: lock = 1, nml = 0x44, curr_nml = 0x44

[    7.415627] <2>.(2)[6:kworker/u8:0][VcoreFS] vcorefs_sdio_unlock_dvfs[928], sdio unlock: lock = 1

[    7.416733] <2>.(2)[6:kworker/u8:0][VcoreFS] kick_dvfs_by_index[653], 0 kick: lock = 1, index = 1, curr_index = 0 (0)

[    7.418063] <2>.(2)[6:kworker/u8:0][VcoreFS] kick_dvfs_by_index[655], vcore_dvfs_before_late_init=1, dtcm_ready=0, md32_mobile_log_ready=0

[    7.419643] <2>-(2)[6:kworker/u8:0][sd][SD3] register abnormal,please check!

[    7.421177] <0>.(0)[290:crash_dump64]DEBUG:

[    7.421197] <0>.(2)[6:kworker/u8:0]mmc2: new ultra high speed SDR104 SDIO card at address 0001

[    7.421453] <0>.(2)[6:kworker/u8:0][SDIO-DETECT][I]sdio_detect_probe:vendor(0x37a) device(0x6630) num(0x1)

[    7.421457] <0>.(2)[6:kworker/u8:0][SDIO-DETECT][I]hif_sdio_match_chipid_by_dev_id:valid chipId found, index(4), vendor id(0x37a), device id(0x6630), chip id(0x6630)

[    7.421459] <0>.(2)[6:kworker/u8:0]set current consys chipid (0x6630)

[    7.421462] <0>.(2)[6:kworker/u8:0][SDIO-DETECT][I]sdio_detect_probe:autok function detected, func:0xffffffc070565c00

[    7.421599] <0>.(2)[6:kworker/u8:0][SDIO-DETECT][I]sdio_detect_probe:vendor(0x37a) device(0x6630) num(0x2)

[    7.421602] <0>.(2)[6:kworker/u8:0][SDIO-DETECT][I]hif_sdio_match_chipid_by_dev_id:valid chipId found, index(4), vendor id(0x37a), device id(0x6630), chip id(0x6630)

[    7.421604] <0>.(2)[6:kworker/u8:0]set current consys chipid (0x6630)

[    7.431941] <0>.(0)[290:crash_dump64]DEBUG: backtrace:

[    7.432705] <0>.(0)[290:crash_dump64]DEBUG:     #00 pc 0000000000021c38  /system/lib64/libc.so (abort+116)

[    7.434005] <0>.(0)[290:crash_dump64]DEBUG:     #01 pc 0000000000050ba8  /system/vendor/lib64/hw/hwcomposer.mt8173.so (DispDevice::DispDevice()+676)

[    7.435731] <0>.(0)[290:crash_dump64]DEBUG:     #02 pc 00000000000328c0  /system/vendor/lib64/hw/hwcomposer.mt8173.so (HWCMediator::HWCMediator()+268)

[    7.437533] <0>.(0)[290:crash_dump64]DEBUG:     #03 pc 0000000000028424  /system/vendor/lib64/hw/hwcomposer.mt8173.so (_GLOBAL__sub_I_hwc2.cpp+92)

[    7.439256] <0>.(0)[290:crash_dump64]DEBUG:     #04 pc 000000000002c220  /system/bin/linker64 (__dl__ZL10call_arrayIPFviPPcS1_EEvPKcPT_mbS5_+276)

[    7.441307] <2>.(2)[290:crash_dump64]DEBUG:     #05 pc 000000000002c440  /system/bin/linker64 (__dl__ZN6soinfo17call_constructorsEv+380)

[    7.442875] <2>.(2)[290:crash_dump64]DEBUG:     #06 pc 00000000000185b4  /system/bin/linker64 (__dl__Z9do_dlopenPKciPK17android_dlextinfoPKv+1668)

[    7.444548] <2>.(2)[290:crash_dump64]DEBUG:     #07 pc 0000000000014288  /system/bin/linker64 (__loader_dlopen+68)

[    7.445875] <2>.(2)[290:crash_dump64]DEBUG:     #08 pc 0000000000000f04  /system/lib64/libdl.so (dlopen+12)

[    7.447102] <2>.(2)[290:crash_dump64]DEBUG:     #09 pc 000000000000091c  /system/lib64/libvndksupport.so (android_load_sphal_library+300)

[    7.448660] <2>.(2)[290:crash_dump64]DEBUG:     #10 pc 0000000000000c0c  /system/lib64/libhardware.so (hw_get_module_by_class+604)

[    7.450170] <2>.(2)[290:crash_dump64]DEBUG:     #11 pc 0000000000006a40  /system/vendor/lib64/hw/android.hardware.graphics.composer@2.1-impl.so (android::hardware::graphics::composer::V2_1::passthrough::HwcLoader::load()+44)

[    7.452676] <2>.(2)[290:crash_dump64]DEBUG:     #12 pc 00000000000307d0  /system/lib64/libhidltransport.so (_ZZN7android8hardware25PassthroughServiceManager3getERKNS0_11hidl_stringES4_ENKUlPvRKNSt3__112basic_stringIcNS6_11char_traitsIcEENS6_9allocatorIcEEEESE_E_clES5_SE_SE_+96)

[    7.455774] <2>.(2)[290:crash_dump64]DEBUG:     #13 pc 000000000002cdf0  /system/lib64/libhidltransport.so (android::hardware::PassthroughServiceManager::openLibs(std::__1::basic_string<char, std::__1::char_traits<char>, std::__1::allocator<char>> const&, std::__1::function<bool (void*, std::__1::basic_string<char, std::__1::char_traits<char>, std::__1::allocator<char>> const&, std::__1::basic_string<char, std::__1::char_traits<char>, std::__1::allocator<char>> const&)> const&)+1116)

[    7.461196] <2>.(2)[290:crash_dump64]DEBUG:     #14 pc 000000000002efa4  /system/lib64/libhidltransport.so (android::hardware::PassthroughServiceManager::get(android::hardware::hidl_string const&, android::hardware::hidl_string const&)+96)

[    7.464166] <2>.(2)[290:crash_dump64]DEBUG:     #15 pc 000000000002de78  /system/lib64/libhidltransport.so (android::hardware::details::getRawServiceInternal(std::__1::basic_string<char, std::__1::char_traits<char>, std::__1::allocator<char>> const&, std::__1::basic_string<char, std::__1::char_traits<char>, std::__1::allocator<char>> const&, bool, bool)+1340)

[    7.468164] <2>.(2)[290:crash_dump64]DEBUG:     #16 pc 000000000001f56c  /system/lib64/android.hardware.graphics.composer@2.1.so (_ZN7android8hardware7details18getServiceInternalINS0_8graphics8composer4V2_112BpHwComposerENS5_9IComposerEvvEENS_2spIT0_EERKNSt3__112basic_stringIcNSB_11char_traitsIcEENSB_9allocatorIcEEEEbb+204)

[    7.471806] <2>.(2)[290:crash_dump64]DEBUG:     #17 pc 0000000000000ee8  /system/vendor/bin/hw/android.hardware.graphics.composer@2.1-service

[    7.473417] <2>.(2)[290:crash_dump64]DEBUG:     #18 pc 0000000000000e50  /system/vendor/bin/hw/android.hardware.graphics.composer@2.1-service

[    7.475019] <2>.(2)[290:crash_dump64]DEBUG:     #19 pc 0000000000000dc4  /system/vendor/bin/hw/android.hardware.graphics.composer@2.1-service (main+232)

[    7.476749] <2>.(2)[290:crash_dump64]DEBUG:     #20 pc 00000000000adb38  /system/lib64/libc.so (__libc_init+88)

[    7.489670] <1>.(1)[165:bat_thread_kthr]wait usb connection ready..

[    7.500069] <2>.(2)[1:init]init: Command 'insmod /vendor/lib/modules/wmt_drv.ko' action=boot (/vendor/etc/init/init.wmt_drv.rc:2) took 156ms and failed: open("/vendor/lib/modules/wmt_drv.ko") failed: No such file or directory

[    7.502655] <2>.(2)[1:init]init: Service 'vendor.hwcomposer-2-1' (pid 243) received signal 6

[    7.503707] <2>.(2)[1:init]init: Sending signal 9 to service 'vendor.hwcomposer-2-1' (pid 243) process group...

[    7.505090] <2>.(2)[1:init]libprocessgroup: Successfully killed process cgroup uid 1000 pid 243 in 0ms

[    7.506618] <2>.(2)[1:init]init: Untracked pid 290 exited with status 0

[    7.507482] <2>.(2)[1:init]init: Untracked pid 292 exited with status 0

[    7.508338] <2>.(2)[1:init]init: processing action (enable_property_trigger) from (<Builtin Action>:0)

[    7.509760] <2>.(2)[1:init]init: processing action (ro.debuggable=1) from (/init.rc:760)

[    7.512121] <2>.(2)[1:init]init: starting service 'console'...

[   7.513641] <2>.(2)[1:init]init: processing action (ro.board.platform=mt8173) from (/init.mt8173.rc:709)

[    7.513872] <2>.(0)[315:init]init: setpgid failed for console: Operation not permitted

[    7.516052] <2>.(2)[1:init]init: processing action (ro.build.type=eng) from (/init.mt8173.rc:824)

[    7.517392] <2>.(2)[1:init]init: File /system/bin/atcid(labeled "u:object_r:system_file:s0") has incorrect label or no domain transition from u:r:init:s0 to another SELinux domain defined. Have you configured your service correctly? https://source.android.com/security/selinux/device-policy#label_new_services_and_address_denials

[    7.521064] <2>.(2)[1:init]init: starting service 'atcid-daemon-e'...

[    7.522797] <2>.(2)[1:init]init: processing action (ro.build.type=eng) from (/init.mt8173.rc:1270)

[    7.523239] <2>.(3)[316:init]init: Created socket '/dev/socket/adb_atci_socket', mode 660, user 1001, group 1000

[    7.525401] <2>.(2)[1:init]init: File /system/bin/em_svr(labeled "u:object_r:system_file:s0") has incorrect label or no domain transition from u:r:init:s0 to another SELinux domain defined. Have you configured your service correctly? https://source.android.com/security/selinux/device-policy#label_new_services_and_address_denials

[    7.529034] <2>.(2)[1:init]init: starting service 'emsvr'...

[    7.530832] <2>.(2)[1:init]init: processing action (sys.usb.config=mtp,adb) from (init.suez.usb.rc:117)

[    7.532449] <2>.(2)[1:init][g_android]android_usb: already disabled

[    7.533764] <2>.(2)[1:init]init: starting service 'adbd'...

[    7.535298] <2>.(2)[1:init]init: processing action (ro.build.type=eng) from (/system/etc/init/atcid.rc:17)

[    7.535612] <2>.(3)[318:init]init: Created socket '/dev/socket/adbd', mode 660, user 1000, group 1000

[    7.537679] <2>.(2)[1:init]init: processing action (ro.boot.bootreason=*) from (/system/etc/init/bootstat.rc:4)

[    7.539211] <2>.(2)[1:init]init: Service 'atcid-daemon-e' (pid 316) exited with status 1

[    7.540564] <2>.(2)[1:init]init: processing action (ro.build.type=eng) from (/system/etc/init/em_svr.rc:1)

[    7.541811] <2>.(2)[1:init]init: processing action (nonencrypted) from (/init.rc:681)

[    7.542823] <2>.(2)[1:init]init: Could not start service 'mobile_log_d' as part of class 'main': Cannot find '/system/bin/mobile_log_d': No such file or directory

[    7.544645] <2>.(2)[1:init]init: Could not start service 'met_log_d' as part of class 'main': Cannot find '/system/bin/met_log_d': No such file or directory

[    7.546400] <2>.(2)[1:init]init: Could not start service 'netdiag' as part of class 'main': Cannot find '/system/bin/netdiag': No such file or directory

[    7.548111] <2>.(2)[1:init]init: Could not start service 'nvram_daemon' as part of class 'main': Cannot find '/system/bin/nvram_daemon': No such file or directory

[    7.549957] <2>.(2)[1:init]init: Could not start service 'pq' as part of class 'main': Cannot find '/system/bin/pq': No such file or directory

[    7.551564] <2>.(2)[1:init]init: Could not start service 'aal' as part of class 'main': Cannot find '/system/bin/aal': No such file or directory

[    7.553327] <2>.(2)[1:init]init: File /system/bin/dm_agent_binder(labeled "u:object_r:system_file:s0") has incorrect label or no domain transition from u:r:init:s0 to another SELinux domain defined. Have you configured your service correctly? https://source.android.com/security/selinux/device-policy#label_new_services_and_address_denials

[    7.557074] <2>.(2)[1:init]init: starting service 'DMAgent'...

[    7.557346] <2>.(3)[319:usb ffs open][g_android]read descriptors

[    7.557349] <2>.(3)[319:usb ffs open][g_android]read descriptors

[    7.557354] <2>.(3)[319:usb ffs open][g_android]read strings

[    7.557371] <2>.(3)[319:usb ffs open]mtp_bind_config

[    7.557377] <2>.(3)[319:usb ffs open]android_usb gadget: adding 'mtp'/ffffffc06e40e800 to config 'android'/ffffffc000f064e8

[    7.557379] <2>.(3)[319:usb ffs open]mtp_function_bind dev: ffffffc06e40e800

[    7.557399] <2>.(3)[319:usb ffs open]android_usb gadget: adding 'Function FS Gadget'/ffffffc06cf65b38 to config 'android'/ffffffc000f064e8

[    7.557406] <2>.(3)[319:usb ffs open]android_usb gadget: cfg 1/ffffffc000f064e8 speeds: super high full

[    7.559535] <2>.(0)[256:wmt_loader][SDIO-DETECT][I]hif_sdio_is_chipid_valid:index:4, chipId:0x6630

[    7.559541] <2>.(0)[256:wmt_loader][SDIO-DETECT][I]hif_sdio_is_chipid_valid:index:4, chipId:0x6630

[    7.559546] <2>.(0)[256:wmt_loader][WMT-DETECT][I]wmt_detect_ext_chip_detect:valid external combo chip id (0x6630)

[    7.559574] <2>.(0)[256:wmt_loader][WMT-DETECT][I]wmt_detect_ext_chip_detect:--

[    7.559659] <2>.(0)[256:wmt_loader][WMT-DETECT][I]wmt_detect_unlocked_ioctl:cmd (-2147191040),arg(0)

[    7.559663] <2>.(0)[256:wmt_loader]query current consys chipid (0x6630)

[    7.559686] <2>.(0)[256:wmt_loader][WMT-DETECT][I]wmt_detect_unlocked_ioctl:cmd (-2147191032),arg(26160)

[    7.559691] <2>.(0)[256:wmt_loader][SDIO-DETECT][I]sdio_detect_do_autok:wait_sdio_autok_ready++

[    7.559698] <2>.(0)[256:wmt_loader]sdio autok ready return directly!

[    7.559701] <2>.(0)[256:wmt_loader][SDIO-DETECT][I]sdio_detect_do_autok:wait_sdio_autok_ready--

[    7.559705] <2>.(0)[256:wmt_loader][SDIO-DETECT][I]sdio_detect_do_autok:wait_sdio_autok_ready return success

[    7.559737] <2>.(0)[256:wmt_loader][WMT-DETECT][I]wmt_detect_unlocked_ioctl:cmd (-2147191033),arg(4)

[    7.559741] <2>.(0)[256:wmt_loader][WMT-DETECT][I]wmt_detect_ext_chip_pwr_off:--

[    7.559749] <2>.(0)[256:wmt_loader]mtk_wcn_cmb_sdio_off (1)

[    7.559902] <2>.(0)[256:wmt_loader][sd]msdc3 -> USR Suspend

[    7.559904] <2>.(0)[256:wmt_loader][SDIO-DETECT][I]sdio_detect_remove:do sdio remove

[    7.560075] <2>.(0)[256:wmt_loader][SDIO-DETECT][I]sdio_detect_remove:do sdio remove

[    7.560164] <2>.(0)[256:wmt_loader]mmc2: card 0001 removed

[    7.570311] <2>.(0)[256:wmt_loader][sd]msdc3 drving<clk 3,cmd 3,dat 3>

[    7.571694] <2>.(0)[256:wmt_loader][sd]msdc3 -> !!! Set<0 Hz>

[    7.571696] <2>.(0)[256:wmt_loader][WMT-DETECT][I]wmt_detect_unlocked_ioctl:cmd (1074034433),arg(26160)

[    7.571701] <2>.(0)[256:wmt_loader]set current consys chipid (0x6630)

[    7.571708] <2>.(0)[256:wmt_loader][WMT-DETECT][I]wmt_detect_unlocked_ioctl:cmd (-2147191035),arg(26160)

[    7.571882] <2>.(0)[256:wmt_loader][SDIO-DETECT][I]sdio_detect_exit:sdio_unregister_driver

[    7.571892] <2>.(0)[256:wmt_loader][WMT-DETECT][I]wmt_detect_unlocked_ioctl:cmd (-2147191036),arg(26160)

[    7.571899] <2>.(0)[256:wmt_loader][WMT-MOD-INIT][I]do_common_drv_init:start to do common driver init, chipid:0x00006630

[    7.571906] <2>.(0)[256:wmt_loader]
3[HIF-SDIO][I]hif_sdio_init:start!

[    7.572070] <2>.(0)[256:wmt_loader]
3[HIF-SDIO][I]_hif_sdio_deep_sleep_info_dmp:p_ds_info: 0x00eeb140, chipid:0x6630, reg_offset:0xf1, value:0x1

[    7.572077] <2>.(0)[256:wmt_loader]
3[HIF-SDIO][I]_hif_sdio_deep_sleep_info_dmp:ctl_info[0]--ctx:0x00000000, func_num:0, act_flag:0, en_flag:0

[    7.572083] <2>.(0)[256:wmt_loader]
3[HIF-SDIO][I]_hif_sdio_deep_sleep_info_dmp:ctl_info[1]--ctx:0x00000000, func_num:0, act_flag:0, en_flag:0

[    7.572090] <2>.(0)[256:wmt_loader]
3[HIF-SDIO][I]_hif_sdio_deep_sleep_info_dmp:p_ds_info: 0x00eeb188, chipid:0x0, reg_offset:0x0, value:0x0

[    7.572097] <2>.(0)[256:wmt_loader]
3[HIF-SDIO][I]_hif_sdio_deep_sleep_info_dmp:ctl_info[0]--ctx:0x00000000, func_num:0, act_flag:0, en_flag:0

[    7.572103] <2>.(0)[256:wmt_loader]
3[HIF-SDIO][I]_hif_sdio_deep_sleep_info_dmp:ctl_info[1]--ctx:0x00000000, func_num:0, act_flag:0, en_flag:0

[    7.572109] <2>.(0)[256:wmt_loader][HIF-SDIO]WMT_init: WMT Version= Combo WMT Driver - v1.0 DATE=2011/10/04

[    7.572114] <2>.(0)[256:wmt_loader][HIF-SDIO]WMT_init: COMBO Driver Version= APEX.WCN.MT6620.JB2.MP.V1.0

[    7.572263] <2>.(1)[256:wmt_loader][STP-PSM] [I]_stp_psm_do_wait: +Total waits for ACT takes 0 msec

[    7.572268] <2>.(0)[320:mtk_stp_psm][STP-PSM] [I]_stp_psm_notify_wmt: In ACT state, dont do WAKEUP/HOST_AWAKE again

[    7.572354] <2>.(3)[256:wmt_loader][STPDbg]stp-dbg init

[    7.572948] <2>.(3)[256:wmt_loader][STPDbg]stp_dbg_nl_init: stp_dbg_nl_init(): operation registration fail

[    7.573067] <2>.(3)[256:wmt_loader][STPDbg]create compressor OK! L1 32768 bytes, L2 524288 bytes

[    7.573069] <2>.(3)[256:wmt_loader][STPDbg]OK! compress algorithm 0

[    7.573071] <2>.(3)[256:wmt_loader][STPDbg]create coredump object OK!

[    7.573085] <2>.(3)[256:wmt_loader]
3[STP] mtk_wcn_stp_dbg_enable:[I] STP dbg mode is turned on

[    7.574054] <2>.(3)[256:wmt_loader][HIF-SDIO]wmt_lib_init: no pwr on seq par found

[    7.574058] <2>.(3)[256:wmt_loader][WMT-CMB-HW]mtk_wcn_cmb_hw_init: invalid pPwrSeqTime parameter, use default hw init sequence parameters

[    7.574061] <2>.(3)[256:wmt_loader][WMT-CMB-HW]mtk_wcn_cmb_hw_dmp_seq: combo chip power on sequence time, RTC (100), LDO (100), RST(30), OFF(10), ON(30)

[    7.574110] <2>.(0)[322:mtk_wmtd][HIF-SDIO]wmtd_thread: wmtd thread starts

[    7.574130] <2>.(3)[256:wmt_loader][UART] stp_uart_fifo_init: stp_uart_fifo_init() success.

[    7.574136] <2>.(3)[256:wmt_loader][STP SDIO][I]stp_sdio_host_info_op:memory allocate for g_stp_sdio_host_info.pkt_buf.tx_buf succeed!

[    7.574139] <2>.(3)[256:wmt_loader][STP SDIO][I]stp_sdio_host_info_op:memory allocate for g_stp_sdio_host_info.pkt_buf.rx_buf succeed!

[    7.574141] <2>.(3)[256:wmt_loader][STP SDIO][I]stp_sdio_init:cltinfo func table size:7

[    7.574144] <2>.(3)[256:wmt_loader][STP SDIO][I]stp_sdio_init:manf_id:0x37a, card_id:0x18b, func_num:1, blk_size:512

[    7.574147] <2>.(3)[256:wmt_loader][STP SDIO][I]stp_sdio_init:manf_id:0x37a, card_id:0x18c, func_num:1, blk_size:512

[    7.574149] <2>.(3)[256:wmt_loader][STP SDIO][I]stp_sdio_init:manf_id:0x37a, card_id:0x6619, func_num:1, blk_size:512

[    7.574151] <2>.(3)[256:wmt_loader][STP SDIO][I]stp_sdio_init:manf_id:0x37a, card_id:0x20b, func_num:1, blk_size:512

[    7.574153] <2>.(3)[256:wmt_loader][STP SDIO][I]stp_sdio_init:manf_id:0x37a, card_id:0x20c, func_num:1, blk_size:512

[    7.574155] <2>.(3)[256:wmt_loader][STP SDIO][I]stp_sdio_init:manf_id:0x37a, card_id:0x6628, func_num:2, blk_size:512

[    7.574157] <2>.(3)[256:wmt_loader][STP SDIO][I]stp_sdio_init:manf_id:0x37a, card_id:0x6630, func_num:2, blk_size:512

[    7.574184] <2>.(3)[256:wmt_loader][STP SDIO][I]stp_sdio_init:blk_size(512), tx_buf_cnt(16), fifo tx(2080) rx(2304), buf tx(2560) rx(2560)

[    7.574187] <2>.(3)[256:wmt_loader][WMT-MOD-INIT][I]do_common_drv_init:finish common driver init

[    7.574189] <2>.(3)[256:wmt_loader][BT-MOD-INIT][I]do_bluetooth_drv_init:start to do bluetooth driver init

[    7.574782] <2>.(3)[256:wmt_loader][MTK-BT] BT_init: mtk_stp_BT_chrdev driver(major 192) installed

[    7.574784] <2>.(3)[256:wmt_loader][BT-MOD-INIT][I]do_bluetooth_drv_init:finish bluetooth driver init, i_ret:0

[    7.574786] <2>.(3)[256:wmt_loader][GPS-MOD-INIT][I]do_gps_drv_init:CONFIG_MTK_COMBO_GPS is not defined

[    7.574789] <2>.(3)[256:wmt_loader][WCN-MOD-INIT][E]do_connectivity_driver_init(62):do common driver init failed, ret:-1

[    7.574791] <2>.(3)[256:wmt_loader][FM-MOD-INIT][I]do_fm_drv_init:start to do fm module init

[    7.574793] <2>.(3)[256:wmt_loader][FM-MOD-INIT][I]do_fm_drv_init:finish fm module init

[    7.574796] <2>.(3)[256:wmt_loader][WLAN-MOD-INIT][I]do_wlan_drv_init:start to do wlan module init 0x6630

[    7.575301] <2>.(3)[256:wmt_loader][MTK-WIFI] WIFI_init: mtk_wmt_WIFI_chrdev driver(major 153) installed.

[    7.575304] <2>.(3)[256:wmt_loader][WLAN-MOD-INIT][I]do_wlan_drv_init:WMT-WIFI char dev init, ret:0

[    7.576422] <2>.(3)[256:wmt_loader][wlan]Reset ALL DBG module log level to DEFAULT!

[    7.576424] <2>.(3)[256:wmt_loader][WLAN-MOD-INIT][I]do_wlan_drv_init:WLAN-GEN3 driver init, ret:0

[    7.576426] <2>.(3)[256:wmt_loader][WLAN-MOD-INIT][I]do_wlan_drv_init:finish wlan module init

[    7.576428] <2>.(3)[256:wmt_loader][ANT-MOD-INIT][I]do_ant_drv_init:start to do ANT driver init

[    7.576432] <2>.(3)[256:wmt_loader][MTK-ANT] ANT_init: fail to register chrdev

[    7.576434] <2>.(3)[256:wmt_loader][ANT-MOD-INIT][I]do_ant_drv_init:finish ANT driver init, i_ret:-16

[    7.576436] <2>.(3)[256:wmt_loader][WCN-MOD-INIT][E]do_connectivity_driver_init(77):do ANT module init failed, ret:-16

[    7.576485] <2>.(3)[256:wmt_loader][WMT-DETECT][I]wmt_detect_close:close major 154 minor 0 (pid 256)

[    7.655720] <2>.(2)[1:init]init: Could not start service 'PPLAgent' as part of class 'main': Cannot find '/system/bin/ppl_agent': No such file or directory

[    7.657469] <2>.(2)[1:init]init: Could not start service 'vtservice' as part of class 'main': Cannot find '/system/bin/vtservice': No such file or directory

[    7.659248] <2>.(2)[1:init]init: Could not start service 'cmmb' as part of class 'main': Cannot find '/system/bin/cmmbsp': No such file or directory

[    7.660943] <2>.(2)[1:init]init: Could not start service 'dbus' as part of class 'main': Cannot find '/system/bin/dbus-daemon': No such file or directory

[    7.662678] <2>.(2)[1:init]init: Could not start service 'agpsd' as part of class 'main': Cannot find '/system/bin/mtk_agpsd': No such file or directory

[    7.664387] <2>.(2)[1:init]init: Could not start service 'slpd' as part of class 'main': Cannot find '/system/bin/slpd': No such file or directory

[    7.666030] <2>.(2)[1:init]init: Could not start service 'wifi2agps' as part of class 'main': Cannot find '/system/bin/wifi2agps': No such file or directory

[    7.676742] <0>.(0)[1:init]init: Could not start service 'mnld' as part of class 'main': Cannot find '/system/xbin/mnld': No such file or directory

[    7.678526] <2>.(2)[1:init]init: Could not start service 'extmdlogger' as part of class 'main': Cannot find '/system/bin/extmdlogger': No such file or directory

[    7.680367] <2>.(2)[1:init]init: Could not start service 'GoogleOtaAgent' as part of class 'main': Cannot find '/system/bin/GoogleOtaBinder': No such file or directory

[    7.682258] <2>.(2)[1:init]init: Could not start service 'msensord' as part of class 'main': Cannot find '/system/bin/msensord': No such file or directory

[    7.684019] <2>.(2)[1:init]init: Could not start service 'NvRAMAgent' as part of class 'main': Cannot find '/system/bin/nvram_agent_binder': No such file or directory

[    7.685879] <2>.(2)[1:init]init: Could not start service 'thermal_manager' as part of class 'main': Cannot find '/system/bin/thermal_manager': No such file or directory

[    7.687781] <2>.(2)[1:init]init: Could not start service 'thermal' as part of class 'main': Cannot find '/system/bin/thermal': No such file or directory

[    7.689717] <2>.(2)[1:init]init: File /system/bin/thermald(labeled "u:object_r:system_file:s0") has incorrect label or no domain transition from u:r:init:s0 to another SELinux domain defined. Have you configured your service correctly? https://source.android.com/security/selinux/device-policy#label_new_services_and_address_denials

[    7.693374] <2>.(2)[1:init]init: starting service 'thermald'...

[    7.694831] <2>.(2)[1:init]init: Could not start service 'poad' as part of class 'main': Cannot find '/system/bin/poad': No such file or directory

[    7.696498] <2>.(2)[1:init]init: Could not start service 'backuprestore' as part of class 'main': Cannot find '/system/bin/br_app_data_service': No such file or directory

[    7.698406] <2>.(2)[1:init]init: Could not start service 'MtkCodecService' as part of class 'main': Cannot find '/system/bin/MtkCodecService': No such file or directory

[    7.700347] <2>.(2)[1:init]init: Could not start service 'guiext-server' as part of class 'main': Cannot find '/system/bin/guiext-server': No such file or directory

[    7.702232] <2>.(2)[1:init]init: Could not start service 'usbdongled' as part of class 'main': Cannot find '/system/bin/dongled': No such file or directory

[    7.704003] <2>.(2)[1:init]init: Could not start service 'bat_logging' as part of class 'main': Cannot find '/system/bin/battery_lifetime_data': No such file or directory

[    7.706143] <2>.(2)[1:init]init: starting service 'cameraserver'...

[    7.707813] <2>.(2)[1:init]init: starting service 'drm'...

[    7.709401] <2>.(2)[1:init]init: starting service 'incidentd'...

[    7.709803] <2>.(3)[327:init]init: couldn't write 327 to /dev/cpuset/camera-daemon/tasks: No such file or directory

[    7.712437] <2>.(2)[1:init]init: starting service 'installd'...

[    7.715499] <2>.(2)[1:init]init: starting service 'keystore'...

[    7.717382] <2>.(2)[1:init]init: starting service 'mediadrm'...

[    7.719422] <2>.(2)[1:init]init: starting service 'mediaextractor'...

[    7.721299] <2>.(2)[1:init]init: starting service 'mediametrics'...

[    7.722981] <2>.(2)[1:init]init: starting service 'media'...

[    7.724685] <2>.(2)[1:init]init: starting service 'statsd'...

[    7.726499] <2>.(2)[1:init]init: starting service 'storaged'...

[    7.726609] <2>.(3)[336:init]init: Created socket '/dev/socket/statsdw', mode 222, user 1066, group 1066

[    7.729402] <2>.(2)[1:init]init: starting service 'wificond'...

[    7.731035] <2>.(2)[1:init]init: starting service 'vendor.media.omx'...

[    7.732802] <2>.(2)[1:init]init: File /vendor/bin/hw/android.hardware.sensors@1.0-service-mediatek(labeled "u:object_r:vendor_file:s0") has incorrect label or no domain transition from u:r:init:s0 to another SELinux domain defined. Have you configured your service correctly? https://source.android.com/security/selinux/device-policy#label_new_services_and_address_denials

[    7.736906] <2>.(2)[1:init]init: starting service 'sensors-hal-1-0'...

[    7.738689] <2>.(2)[1:init]init: File /vendor/bin/hw/camerahalserver(labeled "u:object_r:vendor_file:s0") has incorrect label or no domain transition from u:r:init:s0 to another SELinux domain defined. Have you configured your service correctly? https://source.android.com/security/selinux/device-policy#label_new_services_and_address_denials

[    7.741013] <2>.(3)[337:init]init: Opened file '/d/mmc0/mmc0:0001/ext_csd', flags 0

[    7.743608] <2>.(2)[1:init]init: starting service 'camerahalserver'...

[    7.745395] <2>.(2)[1:init]init: File /vendor/bin/lbs_hidl_service(labeled "u:object_r:vendor_file:s0") has incorrect label or no domain transition from u:r:init:s0 to another SELinux domain defined. Have you configured your service correctly? https://source.android.com/security/selinux/device-policy#label_new_services_and_address_denials

[    7.749142] <2>.(2)[1:init]init: starting service 'lbs_hidl_service'...

[    7.749835] <2>.(3)[341:init]init: couldn't write 341 to /dev/cpuset/camera-daemon/tasks: No such file or directory

[    7.752301] <2>.(2)[1:init]init: File /vendor/bin/hw/vendor.mediatek.hardware.pq@2.0-service(labeled "u:object_r:vendor_file:s0") has incorrect label or no domain transition from u:r:init:s0 to another SELinux domain defined. Have you configured your service correctly? https://source.android.com/security/selinux/device-policy#label_new_services_and_address_denials

[    7.756329] <2>.(2)[1:init]init: starting service 'pq-2-0'...

[    7.757737] <2>.(2)[1:init]init: Command 'class_start main' action=nonencrypted (/init.rc:682) took 214ms and succeeded

[    7.759408] <2>.(2)[1:init]init: starting service 'enableswap'...

[    7.761252] <2>.(2)[1:init]init: File /system/bin/sn(labeled "u:object_r:system_file:s0") has incorrect label or no domain transition from u:r:init:s0 to another SELinux domain defined. Have you configured your service correctly? https://source.android.com/security/selinux/device-policy#label_new_services_and_address_denials

[    7.764887] <2>.(2)[1:init]init: starting service 'sn'...

[    7.766420] <2>.(2)[1:init]init: Could not start service 'program_binary' as part of class 'late_start': Cannot find '/system/bin/program_binary_service': No such file or directory

[    7.768466] <2>.(2)[1:init]init: Could not start service 'wifi_log_levels' as part of class 'late_start': Cannot find '/system/etc/wifi_log_levels.sh': No such file or directory

[    7.770451] <2>.(3)[346:init]init: cannot setexeccon('u:r:enableswap:s0') for enableswap: Invalid argument

[    7.772101] <2>.(2)[1:init]init: starting service 'gatekeeperd'...

[    7.773748] <2>.(2)[1:init]init: starting service 'perfprofd'...

[    7.775309] <2>.(2)[1:init]init: starting service 'tombstoned'...

[    7.776922] <2>.(2)[1:init]init: starting service 'usbd'...

[    7.778438] <2>.(2)[1:init]init: File /vendor/bin/netdagent(labeled "u:object_r:vendor_file:s0") has incorrect label or no domain transition from u:r:init:s0 to another SELinux domain defined. Have you configured your service correctly? https://source.android.com/security/selinux/device-policy#label_new_services_and_address_denials

[    7.782236] <2>.(2)[1:init]init: starting service 'netdagent'...

[    7.790200] <3>.(3)[350:init]init: Created socket '/dev/socket/tombstoned_crash', mode 666, user 1000, group 1000

[    7.791694] <3>.(3)[350:init]init: Created socket '/dev/socket/tombstoned_intercept', mode 666, user 1000, group 1000

[    7.793186] <3>.(3)[350:init]init: Created socket '/dev/socket/tombstoned_java_trace', mode 666, user 1000, group 1000

[    7.794067] <3>.(2)[1:init]init: processing action (service.wcn.driver.ready=yes) from (/vendor/etc/init/init.bt_drv.rc:2)

[    7.794727] <3>.(2)[1:init]init: Service 'wmt_loader' (pid 256) exited with status 0

[    7.794910] <3>.(2)[1:init]init: Service 'enableswap' (pid 346) exited with status 6

[    7.910856] <3>.(3)[1:init]init: processing action (service.wcn.driver.ready=yes) from (/vendor/etc/init/init.wlan_drv.rc:3)

[    7.913557] <0>.(0)[172:init]init: property 'ro.wlan.gen' doesn't exist while expanding '/vendor/lib/modules/wlan_drv_${ro.wlan.gen}.ko'

[    7.915628] <2>.(2)[1:init]init: Command 'insmod /vendor/lib/modules/wlan_drv_${ro.wlan.gen}.ko' action=service.wcn.driver.ready=yes (/vendor/etc/init/init.wlan_drv.rc:5) took 3ms and failed: cannot expand '/vendor/lib/modules/wlan_drv_${ro.wlan.gen}.ko'

[    7.949068] <2>.(2)[165:bat_thread_kthr][hw_charger_type_detection] chr_type: 2

[    7.961297] <1>.(1)[6:kworker/u8:0][MU3D]mu3d_hal_system_intr_en

[    7.962122] <1>.(1)[6:kworker/u8:0]musb-mtu3d 11270000.usb: gadget pullup D+ (soft-connect)

[    7.963231] <1>.(1)[6:kworker/u8:0][MU3D]connection_work ----Connect----,1

[    8.009747] <0>.(0)[165:bat_thread_kthr]total_time_plug_in(0), cv(-1)

[    8.028997] <0>.(0)[165:bat_thread_kthr][select_jeita_cv] CV(4352000) custom CV(-1)

[    8.037964] <0>-(0)[165:bat_thread_kthr]mtk_rtc_hal_common: rtc_spare_reg[0] = {57372, 127, 8}

[    8.039791] <0>.(0)[213:logd.auditd]type=1400 audit(1554747624.410:82): avc: denied { open } for pid=243 comm="android.hardwar" path="/proc/ged" dev="proc" ino=4026532287 scontext=u:r:hal_graphics_composer_default:s0 tcontext=u:object_r:proc:s0 tclass=file permissive=1

[    8.040009] <0>.(2)[232:healthd]healthd: battery l=84 v=4127 t=24.0 h=2 st=2 chg=u

[    8.040372] <0>.(2)[232:healthd]healthd: battery l=84 v=4127 t=24.0 h=2 st=2 chg=u

[    8.044823] <0>.(0)[213:logd.auditd]type=1400 audit(1554747625.270:117): avc: denied { read } for pid=232 comm="healthd" name="present" dev="sysfs" ino=16768 scontext=u:r:healthd:s0 tcontext=u:object_r:sysfs:s0 tclass=file permissive=1

[    8.047202] <0>.(1)[1:init]init: Received control message 'interface_start' for 'android.hardware.camera.provider@2.4::ICameraProvider/legacy/0' from pid: 202 (/system/bin/hwservicemanager)

[    8.047274] <0>.(1)[1:init]init: Could not find service hosting interface android.hardware.camera.provider@2.4::ICameraProvider/legacy/0

[    8.051496] <0>.(0)[213:logd.auditd]type=1400 audit(1554747625.270:117): avc: denied { read } for pid=232 comm="healthd" name="present" dev="sysfs" ino=16768 scontext=u:r:healthd:s0 tcontext=u:object_r:sysfs:s0 tclass=file permissive=1

[    8.054268] <0>.(0)[213:logd.auditd]type=1400 audit(1554747625.270:118): avc: denied { open } for pid=232 comm="healthd" path="/sys/devices/mediatek,battery_common/power_supply/battery/present" dev="sysfs" ino=16768 scontext=u:r:healthd:s0 tcontext=u:object_r:sysfs:s0 tclass=file permissive=1

[    8.056316] <0>.(1)[1:init]init: Received control message 'interface_start' for 'android.hardware.camera.provider@2.4::ICameraProvider/external/0' from pid: 202 (/system/bin/hwservicemanager)

[    8.056375] <0>.(1)[1:init]init: Could not find service hosting interface android.hardware.camera.provider@2.4::ICameraProvider/external/0

[    8.061465] <0>.(0)[213:logd.auditd]type=1400 audit(1554747625.270:118): avc: denied { open } for pid=232 comm="healthd" path="/sys/devices/mediatek,battery_common/power_supply/battery/present" dev="sysfs" ino=16768 scontext=u:r:healthd:s0 tcontext=u:object_r:sysfs:s0 tclass=file permissive=1

[    8.064733] <0>.(0)[213:logd.auditd]type=1400 audit(1554747625.270:119): avc: denied { getattr } for pid=232 comm="healthd" path="/sys/devices/mediatek,battery_common/power_supply/battery/present" dev="sysfs" ino=16768 scontext=u:r:healthd:s0 tcontext=u:object_r:sysfs:s0 tclass=file permissive=1

[    8.111437] <1>.(1)[213:logd.auditd]type=1400 audit(1554747625.270:119): avc: denied { getattr } for pid=232 comm="healthd" path="/sys/devices/mediatek,battery_common/power_supply/battery/present" dev="sysfs" ino=16768 scontext=u:r:healthd:s0 tcontext=u:object_r:sysfs:s0 tclass=file permissive=1

[    8.114774] <1>.(1)[213:logd.auditd]type=1400 audit(1554747625.340:120): avc: denied { read } for pid=347 comm="sn" name="primary" dev="tmpfs" ino=8471 scontext=u:r:init:s0 tcontext=u:object_r:storage_file:s0 tclass=lnk_file permissive=1

[    8.164671] <1>.(1)[213:logd.auditd]type=1400 audit(1554747625.340:120): avc: denied { read } for pid=347 comm="sn" name="primary" dev="tmpfs" ino=8471 scontext=u:r:init:s0 tcontext=u:object_r:storage_file:s0 tclass=lnk_file permissive=1

[    8.170004] <0>.(0)[213:logd.auditd]type=1400 audit(1554747625.390:121): avc: denied { read } for pid=343 comm="vendor.mediatek" name="mtk_disp_mgr" dev="tmpfs" ino=5795 scontext=u:r:init:s0 tcontext=u:object_r:device:s0 tclass=chr_file permissive=1

[    8.173404] <0>-(0)[330:installd][MU3D]USB Speed = High Speed

[    8.196864] <1>.(1)[1:init]init: Received control message 'interface_start' for 'android.hardware.usb.gadget@1.0::IUsbGadget/default' from pid: 202 (/system/bin/hwservicemanager)

[    8.198943] <1>.(1)[1:init]init: Could not find service hosting interface android.hardware.usb.gadget@1.0::IUsbGadget/default

[    8.201698] <0>.(0)[1:init]init: Service 'usbd' (pid 351) exited with status 0

[    8.208272] <1>.(1)[202:hwservicemanage]audit: audit_lost=101 audit_rate_limit=5 audit_backlog_limit=64

[    8.209451] <1>.(1)[202:hwservicemanage]audit: rate limit exceeded

[    8.229642] <2>.(2)[165:bat_thread_kthr]total_time_plug_in(1), cv(-1)

[    8.244881] <3>.(3)[165:bat_thread_kthr][select_jeita_cv] CV(4352000) custom CV(-1)

[    8.254605] <0>-(0)[165:bat_thread_kthr]mtk_rtc_hal_common: rtc_spare_reg[0] = {57372, 127, 8}

[    8.256958] <0>.(0)[232:healthd]healthd: battery l=84 v=4128 t=24.0 h=2 st=2 chg=u

[    8.311066] <0>-(0)[380:netdagent]android_usb gadget: [COM]composite_disconnect: reassign the complete function!!

[    8.369680] <3>.(3)[165:bat_thread_kthr]total_time_plug_in(1), cv(-1)

[    8.387460] <3>.(3)[165:bat_thread_kthr][select_jeita_cv] CV(4352000) custom CV(-1)

[    8.397560] <0>-(0)[165:bat_thread_kthr]mtk_rtc_hal_common: rtc_spare_reg[0] = {57372, 127, 8}

[    8.399737] <3>.(3)[232:healthd]healthd: battery l=84 v=4129 t=24.0 h=2 st=2 chg=u

[    8.456237] <0>-(0)[0:swapper/0]android_usb gadget: high-speed config #1: android

[    8.457180] <0>-(0)[0:swapper/0]mtp_function_set_alt intf: 0 alt: 0

[    8.493070] <0>.(0)[1:init]init: Received control message 'interface_start' for 'android.hardware.gatekeeper@1.0::IGatekeeper/default' from pid: 202 (/system/bin/hwservicemanager)

[    8.495220] <0>.(0)[1:init]init: Could not find service hosting interface android.hardware.gatekeeper@1.0::IGatekeeper/default

[    8.497056] <0>.(0)[1:init]init: Received control message 'interface_start' for 'android.hardware.gatekeeper@1.0::IGatekeeper/default' from pid: 202 (/system/bin/hwservicemanager)

[    8.499194] <0>.(0)[1:init]init: Could not find service hosting interface android.hardware.gatekeeper@1.0::IGatekeeper/default

[    8.501543] <1>.(1)[1:init]init: Received control message 'interface_start' for 'android.hardware.keymaster@4.0::IKeymasterDevice/default' from pid: 202 (/system/bin/hwservicemanager)

[    8.503674] <1>.(1)[1:init]init: Could not find service hosting interface android.hardware.keymaster@4.0::IKeymasterDevice/default

[    8.519663] <1>.(1)[165:bat_thread_kthr]total_time_plug_in(1), cv(-1)

[    8.535384] <3>.(3)[165:bat_thread_kthr][select_jeita_cv] CV(4352000) custom CV(-1)

[    8.544702] <3>-(3)[165:bat_thread_kthr]mtk_rtc_hal_common: rtc_spare_reg[0] = {57372, 127, 8}

[    8.548237] <1>.(1)[232:healthd]healthd: battery l=84 v=4129 t=24.0 h=2 st=2 chg=u

[    8.824002] <0>.(0)[1:init]init: Received control message 'interface_start' for 'android.hardware.keymaster@3.0::IKeymasterDevice/default' from pid: 202 (/system/bin/hwservicemanager)

[    8.826170] <0>.(0)[1:init]init: Could not find service hosting interface android.hardware.keymaster@3.0::IKeymasterDevice/default

[    8.828019] <0>.(0)[1:init]init: Received control message 'interface_start' for 'android.hardware.keymaster@3.0::IKeymasterDevice/default' from pid: 202 (/system/bin/hwservicemanager)

[    8.830473] <0>.(0)[1:init]init: Could not find service hosting interface android.hardware.keymaster@3.0::IKeymasterDevice/default

[    9.021179] <0>.(0)[370:PQServiceHAL][DISP][mtk_disp_mgr_ioctl #2216]ERROR:[session]ioctl not supported, 0x67287840

[    9.031446] <1>.(1)[370:PQServiceHAL][DISP][mtk_disp_mgr_ioctl #2216]ERROR:[session]ioctl not supported, 0xc22c784f

[    9.839531] <0>.(0)[171:vcorefs][VcoreFS] vcorefs_kthread[696], vcore_dvfs_before_late_init=1, dtcm_ready=0, md32_mobile_log_ready=0

[   10.209965] <1>.(1)[68:hps_main]CPU3: shutdown

[   10.211534] <1>.(1)[68:hps_main][HPS] (0400)(2)(2)action end(143)(110)(76)(0) (2)(2)(2)(2)(2)(2)(2)(2)(1)(0) (0)(0)(0) (2071)(22)(2) (0)(110)(22)(0)(110)

[   10.212138] <1>.(2)[458:main][name:capability&]capability: warning: `main' uses 32-bit capabilities (legacy support in use)

[   10.699534] <1>.(1)[122:kworker/1:1][VcoreFS] __request_dvfs_opp[794], 5 request: mask = 0x0, index = -1 (0x0)

[   10.700799] <1>.(1)[122:kworker/1:1][VcoreFS] kick_dvfs_by_index[653], 5 kick: lock = 0, index = 1, curr_index = 0 (0)

[   10.702131] <1>.(1)[122:kworker/1:1][VcoreFS] kick_dvfs_by_index[655], vcore_dvfs_before_late_init=1, dtcm_ready=0, md32_mobile_log_ready=0

[   10.703691] <1>.(1)[122:kworker/1:1][EMI DVFS FLIPER] flip to low mode, emi bw is 1033

[   11.034835] <1>.(1)[1:init]init: starting service 'vendor.hwcomposer-2-1'...

[   11.079069] <1>.(1)[1:init]init: File /vendor/bin/teed(labeled "u:object_r:vendor_file:s0") has incorrect label or no domain transition from u:r:init:s0 to another SELinux domain defined. Have you configured your service correctly? https://source.android.com/security/selinux/device-policy#label_new_services_and_address_denials

[   11.082766] <1>.(1)[1:init]init: starting service 'teed'...

[   11.090195] <0>.(0)[213:logd.auditd]type=1400 audit(1554747625.390:121): avc: denied { read } for pid=343 comm="vendor.mediatek" name="mtk_disp_mgr" dev="tmpfs" ino=5795 scontext=u:r:init:s0 tcontext=u:object_r:device:s0 tclass=chr_file permissive=1

[   11.093018] <0>.(0)[213:logd.auditd]type=1400 audit(1554747628.320:157): avc: denied { execute_no_trans } for pid=481 comm="init" path="/system/vendor/bin/teed" dev="mmcblk0p13" ino=2303 scontext=u:r:init:s0 tcontext=u:object_r:vendor_file:s0 tclass=file permissive=1

[   11.101507] <0>.(0)[213:logd.auditd]type=1400 audit(1554747628.320:157): avc: denied { execute_no_trans } for pid=481 comm="init" path="/system/vendor/bin/teed" dev="mmcblk0p13" ino=2303 scontext=u:r:init:s0 tcontext=u:object_r:vendor_file:s0 tclass=file permissive=1

[   11.117547] <0>.(0)[213:logd.auditd]type=1400 audit(1554747628.330:158): avc: denied { read } for pid=480 comm="android.hardwar" name="vndbinder" dev="tmpfs" ino=5772 scontext=u:r:hal_graphics_composer_default:s0 tcontext=u:object_r:vndbinder_device:s0 tclass=chr_file permissive=1

[   11.121406] <1>.(1)[213:logd.auditd]type=1400 audit(1554747628.330:158): avc: denied { read } for pid=480 comm="android.hardwar" name="vndbinder" dev="tmpfs" ino=5772 scontext=u:r:hal_graphics_composer_default:s0 tcontext=u:object_r:vndbinder_device:s0 tclass=chr_file permissive=1

[   11.124622] <1>.(1)[213:logd.auditd]type=1400 audit(1554747628.330:159): avc: denied { write } for pid=480 comm="android.hardwar" name="vndbinder" dev="tmpfs" ino=5772 scontext=u:r:hal_graphics_composer_default:s0 tcontext=u:object_r:vndbinder_device:s0 tclass=chr_file permissive=1

[   11.127962] <1>.(1)[213:logd.auditd]type=1400 audit(1554747628.330:159): avc: denied { write } for pid=480 comm="android.hardwar" name="vndbinder" dev="tmpfs" ino=5772 scontext=u:r:hal_graphics_composer_default:s0 tcontext=u:object_r:vndbinder_device:s0 tclass=chr_file permissive=1

[   11.132278] <1>.(1)[1:init]init: Service 'teed' (pid 481) exited with status 253

[   11.133236] <1>.(1)[1:init]init: Sending signal 9 to service 'teed' (pid 481) process group...

[   11.134437] <1>.(1)[1:init]libprocessgroup: Successfully killed process cgroup uid 1000 pid 481 in 0ms

[   11.136714] <1>.(1)[213:logd.auditd]type=1400 audit(1554747628.330:160): avc: denied { open } for pid=480 comm="android.hardwar" path="/dev/vndbinder" dev="tmpfs" ino=5772 scontext=u:r:hal_graphics_composer_default:s0 tcontext=u:object_r:vndbinder_device:s0 tclass=chr_file permissive=1

[   11.140243] <1>.(1)[213:logd.auditd]type=1400 audit(1554747628.330:160): avc: denied { open } for pid=480 comm="android.hardwar" path="/dev/vndbinder" dev="tmpfs" ino=5772 scontext=u:r:hal_graphics_composer_default:s0 tcontext=u:object_r:vndbinder_device:s0 tclass=chr_file permissive=1

[   11.143506] <2>.(2)[213:logd.auditd]type=1400 audit(1554747628.330:161): avc: denied { ioctl } for pid=480 comm="android.hardwar" path="/dev/vndbinder" dev="tmpfs" ino=5772 ioctlcmd=6209 scontext=u:r:hal_graphics_composer_default:s0 tcontext=u:object_r:vndbinder_device:s0 tclass=chr_file permissive=1

[   11.192370] <0>.(0)[480:android.hardwar]audit: audit_lost=128 audit_rate_limit=5 audit_backlog_limit=64

[   11.193573] <0>.(0)[480:android.hardwar]audit: rate limit exceeded

[   11.195004] <0>.(0)[480:android.hardwar][DISP][mtk_disp_mgr_ioctl #2216]ERROR:[session]ioctl not supported, 0x403c4fda

[   11.305168] <1>.(1)[1:init]init: Untracked pid 490 exited with status 0

[   11.308717] <0>.(0)[1:init]init: Untracked pid 492 exited with status 0

[   11.310517] <0>.(0)[1:init]init: Service 'vendor.hwcomposer-2-1' (pid 480) received signal 6

[   11.311647] <0>.(0)[1:init]init: Sending signal 9 to service 'vendor.hwcomposer-2-1' (pid 480) process group...

[   11.313266] <0>.(0)[1:init]libprocessgroup: Successfully killed process cgroup uid 1000 pid 480 in 0ms

[   12.310117] <1>.(1)[68:hps_main]CPU2: shutdown

[   12.312576] <1>.(1)[68:hps_main]cpufreq: cpufreq_policy_put_kobj[1078], after kobject_put(kobj), refcount=0l;

[   12.313943] <1>.(1)[68:hps_main][HPS] (0400)(2)(1)action end(3)(3)(0)(0) (2)(2)(2)(2)(2)(2)(2)(2)(1)(0) (3)(10)(0) (985)(10)(0) (0)(3)(10)(0)(3)

[   12.849526] <0>.(0)[171:vcorefs][VcoreFS] vcorefs_kthread[696], vcore_dvfs_before_late_init=1, dtcm_ready=0, md32_mobile_log_ready=0

[   14.380268] <0>.(0)[68:hps_main]CPU1: shutdown

[   14.381967] <0>.(0)[68:hps_main][HPS] (0200)(2)(0)action end(3)(4)(0)(0) (2)(2)(2)(2)(2)(2)(2)(2)(1)(0) (3)(10)(0) (41)(10)(0) (0)(4)(10)(0)(4)

[   15.859618] <0>.(0)[171:vcorefs][VcoreFS] vcorefs_kthread[696], vcore_dvfs_before_late_init=1, dtcm_ready=0, md32_mobile_log_ready=0

[   16.040366] <0>.(0)[1:init]init: starting service 'vendor.hwcomposer-2-1'...

[   16.159012] <0>.(0)[586:android.hardwar][DISP][mtk_disp_mgr_ioctl #2216]ERROR:[session]ioctl not supported, 0x403c4fda

[   16.161239] <0>.(0)[1:init]init: File /vendor/bin/teed(labeled "u:object_r:vendor_file:s0") has incorrect label or no domain transition from u:r:init:s0 to another SELinux domain defined. Have you configured your service correctly? https://source.android.com/security/selinux/device-policy#label_new_services_and_address_denials

[   16.164876] <0>.(0)[1:init]init: starting service 'teed'...

[   16.167751] <0>.(0)[213:logd.auditd]type=1400 audit(1554747628.330:161): avc: denied { ioctl } for pid=480 comm="android.hardwar" path="/dev/vndbinder" dev="tmpfs" ino=5772 ioctlcmd=6209 scontext=u:r:hal_graphics_composer_default:s0 tcontext=u:object_r:vndbinder_device:s0 tclass=chr_file permissive=1

[   16.184242] <0>.(0)[68:hps_main][HPS] (0004)(1)(0)action end(72)(499)(0)(3) (2)(2)(2)(2)(2)(2)(2)(2)(1)(0) (9)(8)(0) (0)(0)(0) (0)(21)(8)(0)(21)

[   16.187242] <0>.(0)[213:logd.auditd]type=1400 audit(1554747633.380:172): avc: denied { read } for pid=586 comm="android.hardwar" name="mtk_disp_mgr" dev="tmpfs" ino=5795 scontext=u:r:hal_graphics_composer_default:s0 tcontext=u:object_r:device:s0 tclass=chr_file permissive=1

[   16.190707] <0>.(0)[213:logd.auditd]type=1400 audit(1554747633.380:172): avc: denied { read } for pid=586 comm="android.hardwar" name="mtk_disp_mgr" dev="tmpfs" ino=5795 scontext=u:r:hal_graphics_composer_default:s0 tcontext=u:object_r:device:s0 tclass=chr_file permissive=1

[   16.193752] <0>.(0)[213:logd.auditd]type=1400 audit(1554747633.380:173): avc: denied { open } for pid=586 comm="android.hardwar" path="/dev/mtk_disp_mgr" dev="tmpfs" ino=5795 scontext=u:r:hal_graphics_composer_default:s0 tcontext=u:object_r:device:s0 tclass=chr_file permissive=1

[   16.196912] <0>.(0)[213:logd.auditd]type=1400 audit(1554747633.380:173): avc: denied { open } for pid=586 comm="android.hardwar" path="/dev/mtk_disp_mgr" dev="tmpfs" ino=5795 scontext=u:r:hal_graphics_composer_default:s0 tcontext=u:object_r:device:s0 tclass=chr_file permissive=1

[   16.200346] <0>.(0)[213:logd.auditd]type=1400 audit(1554747633.380:174): avc: denied { ioctl } for pid=586 comm="android.hardwar" path="/dev/mtk_disp_mgr" dev="tmpfs" ino=5795 ioctlcmd=4fda scontext=u:r:hal_graphics_composer_default:s0 tcontext=u:object_r:device:s0 tclass=chr_file permissive=1

[   16.213619] <3>.(3)[1:init]init: Service 'teed' (pid 589) exited with status 253

[   16.214580] <3>.(3)[1:init]init: Sending signal 9 to service 'teed' (pid 589) process group...

[   16.215788] <3>.(3)[1:init]libprocessgroup: Successfully killed process cgroup uid 1000 pid 589 in 0ms

[   16.277622] <2>.(2)[1:init]init: Service 'vendor.hwcomposer-2-1' (pid 586) received signal 6

[   16.278698] <2>.(2)[1:init]init: Sending signal 9 to service 'vendor.hwcomposer-2-1' (pid 586) process group...

[   16.280133] <2>.(2)[1:init]libprocessgroup: Successfully killed process cgroup uid 1000 pid 586 in 0ms

[   16.281827] <2>.(2)[1:init]init: Untracked pid 596 exited with status 0

[   16.282713] <2>.(2)[1:init]init: Untracked pid 598 exited with status 0

[   18.111462] <0>.(0)[213:logd.auditd]type=1400 audit(1554747633.380:174): avc: denied { ioctl } for pid=586 comm="android.hardwar" path="/dev/mtk_disp_mgr" dev="tmpfs" ino=5795 ioctlcmd=4fda scontext=u:r:hal_graphics_composer_default:s0 tcontext=u:object_r:device:s0 tclass=chr_file permissive=1

[   18.114806] <0>.(0)[213:logd.auditd]type=1400 audit(1554747635.340:175): avc: denied { read } for pid=347 comm="sn" name="primary" dev="tmpfs" ino=8471 scontext=u:r:init:s0 tcontext=u:object_r:storage_file:s0 tclass=lnk_file permissive=1

[   18.280115] <2>.(2)[68:hps_main]CPU3: shutdown

[   18.360102] <0>.(0)[68:hps_main]CPU2: shutdown

[   18.362394] <0>.(0)[68:hps_main]cpufreq: cpufreq_policy_put_kobj[1078], after kobject_put(kobj), refcount=0l;

[   18.363746] <0>.(0)[68:hps_main][HPS] (0400)(1)(2)action end(7)(7)(0)(0) (2)(2)(2)(2)(2)(2)(2)(2)(1)(0) (7)(10)(0) (131)(10)(0) (0)(7)(10)(0)(7)

[   18.660036] <0>.(0)[165:bat_thread_kthr]total_time_plug_in(11), cv(-1)

[   18.676216] <0>.(0)[165:bat_thread_kthr][select_jeita_cv] CV(4352000) custom CV(-1)

[   18.685791] <0>-(0)[165:bat_thread_kthr]mtk_rtc_hal_common: rtc_spare_reg[0] = {57372, 127, 8}

[   18.688448] <0>.(0)[232:healthd]healthd: battery l=84 v=4132 t=24.0 h=2 st=2 chg=u

[   18.690477] <0>.(0)[213:logd.auditd]type=1400 audit(1554747635.340:175): avc: denied { read } for pid=347 comm="sn" name="primary" dev="tmpfs" ino=8471 scontext=u:r:init:s0 tcontext=u:object_r:storage_file:s0 tclass=lnk_file permissive=1

[   18.693145] <0>.(0)[213:logd.auditd]type=1400 audit(1554747635.910:176): avc: denied { read } for pid=232 comm="healthd" name="present" dev="sysfs" ino=16768 scontext=u:r:healthd:s0 tcontext=u:object_r:sysfs:s0 tclass=file permissive=1

[   18.696383] <0>.(0)[213:logd.auditd]type=1400 audit(1554747635.910:176): avc: denied { read } for pid=232 comm="healthd" name="present" dev="sysfs" ino=16768 scontext=u:r:healthd:s0 tcontext=u:object_r:sysfs:s0 tclass=file permissive=1

[   18.699015] <0>.(0)[213:logd.auditd]type=1400 audit(1554747635.910:177): avc: denied { open } for pid=232 comm="healthd" path="/sys/devices/mediatek,battery_common/power_supply/battery/present" dev="sysfs" ino=16768 scontext=u:r:healthd:s0 tcontext=u:object_r:sysfs:s0 tclass=file permissive=1

[   18.703093] <0>.(0)[213:logd.auditd]type=1400 audit(1554747635.910:177): avc: denied { open } for pid=232 comm="healthd" path="/sys/devices/mediatek,battery_common/power_supply/battery/present" dev="sysfs" ino=16768 scontext=u:r:healthd:s0 tcontext=u:object_r:sysfs:s0 tclass=file permissive=1

[   18.706366] <0>.(0)[213:logd.auditd]type=1400 audit(1554747635.910:178): avc: denied { getattr } for pid=232 comm="healthd" path="/sys/devices/mediatek,battery_common/power_supply/battery/present" dev="sysfs" ino=16768 scontext=u:r:healthd:s0 tcontext=u:object_r:sysfs:s0 tclass=file permissive=1

[   18.869572] <0>.(0)[171:vcorefs][VcoreFS] vcorefs_kthread[696], vcore_dvfs_before_late_init=1, dtcm_ready=0, md32_mobile_log_ready=0

[   21.048413] <0>.(0)[1:init]init: starting service 'vendor.hwcomposer-2-1'...

[   21.176123] <0>.(0)[685:android.hardwar][DISP][mtk_disp_mgr_ioctl #2216]ERROR:[session]ioctl not supported, 0x403c4fda

[   21.178529] <0>.(0)[1:init]init: File /vendor/bin/teed(labeled "u:object_r:vendor_file:s0") has incorrect label or no domain transition from u:r:init:s0 to another SELinux domain defined. Have you configured your service correctly? https://source.android.com/security/selinux/device-policy#label_new_services_and_address_denials

[   21.183303] <0>.(0)[1:init]init: starting service 'teed'...

[   21.231005] <0>.(0)[1:init]init: Service 'teed' (pid 690) exited with status 253

[   21.231962] <0>.(0)[1:init]init: Sending signal 9 to service 'teed' (pid 690) process group...

[   21.233423] <0>.(0)[1:init]libprocessgroup: Successfully killed process cgroup uid 1000 pid 690 in 0ms

[   21.311578] <0>.(0)[1:init]init: Untracked pid 693 exited with status 0

[   21.312556] <0>.(0)[1:init]init: Untracked pid 697 exited with status 0

[   21.326500] <0>.(0)[1:init]init: Service 'vendor.hwcomposer-2-1' (pid 685) received signal 6

[   21.327593] <0>.(0)[1:init]init: Sending signal 9 to service 'vendor.hwcomposer-2-1' (pid 685) process group...

[   21.329012] <0>.(0)[1:init]libprocessgroup: Successfully killed process cgroup uid 1000 pid 685 in 0ms

[   21.360670] <0>.(0)[68:hps_main][HPS] (0080)(1)(0)action end(83)(292)(0)(0) (2)(2)(2)(2)(2)(2)(2)(2)(1)(0) (83)(15)(0) (0)(0)(0) (0)(292)(15)(0)(292)

[   21.879547] <0>.(0)[171:vcorefs][VcoreFS] vcorefs_kthread[696], vcore_dvfs_before_late_init=1, dtcm_ready=0, md32_mobile_log_ready=0

[   23.450584] <0>.(0)[68:hps_main]CPU1: shutdown

[   23.452102] <0>.(0)[68:hps_main][HPS] (0200)(2)(0)action end(8)(8)(0)(0) (2)(2)(2)(2)(2)(2)(2)(2)(1)(0) (8)(10)(0) (71)(10)(0) (0)(8)(10)(0)(8)

[   23.759585] <0>.(0)[167:wdtk-0][WDK], local_bit:0x0, cpu:0,RT[23759562594]

[   23.759598] <0>.(0)[167:wdtk-0][WDK], local_bit:0x1, cpu:0, check bit0x:1,RT[23759589055]

[   23.759605] <0>.(0)[167:wdtk-0][WDK]: kick Ex WDT,RT[23759599132]

[   23.759629] <0>.(0)[167:wdtk-0][thread:167][RT:23759610209] 2019-04-08 18:20:40.992434 UTC;android time 2019-04-08 18:20:40.992434

[   24.889580] <0>.(0)[171:vcorefs][VcoreFS] vcorefs_kthread[696], vcore_dvfs_before_late_init=1, dtcm_ready=0, md32_mobile_log_ready=0

[   26.057350] <0>.(0)[1:init]init: starting service 'vendor.hwcomposer-2-1'...

[   26.182027] <0>.(0)[786:android.hardwar][DISP][mtk_disp_mgr_ioctl #2216]ERROR:[session]ioctl not supported, 0x403c4fda

[   26.185923] <0>.(0)[1:init]init: File /vendor/bin/teed(labeled "u:object_r:vendor_file:s0") has incorrect label or no domain transition from u:r:init:s0 to another SELinux domain defined. Have you configured your service correctly? https://source.android.com/security/selinux/device-policy#label_new_services_and_address_denials

[   26.189906] <0>.(0)[1:init]init: starting service 'teed'...

[   26.240270] <0>.(0)[1:init]init: Service 'teed' (pid 789) exited with status 253

[   26.241225] <0>.(0)[1:init]init: Sending signal 9 to service 'teed' (pid 789) process group...

[   26.242427] <0>.(0)[1:init]libprocessgroup: Successfully killed process cgroup uid 1000 pid 789 in 0ms

[   26.252672] <0>.(0)[68:hps_main][HPS] (0004)(1)(0)action end(98)(530)(0)(1) (2)(2)(2)(2)(2)(2)(2)(2)(1)(0) (7)(13)(0) (0)(0)(0) (0)(14)(13)(0)(14)

[   26.315529] <0>.(0)[1:init]init: Untracked pid 794 exited with status 0

[   26.316503] <0>.(0)[1:init]init: Untracked pid 798 exited with status 0

[   26.324419] <0>.(0)[1:init]init: Service 'vendor.hwcomposer-2-1' (pid 786) received signal 6

[   26.325505] <0>.(0)[1:init]init: Sending signal 9 to service 'vendor.hwcomposer-2-1' (pid 786) process group...

[   26.326911] <0>.(0)[1:init]libprocessgroup: Successfully killed process cgroup uid 1000 pid 786 in 0ms

[   27.899522] <0>.(0)[171:vcorefs][VcoreFS] vcorefs_kthread[696], vcore_dvfs_before_late_init=1, dtcm_ready=0, md32_mobile_log_ready=0

[   28.340113] <0>.(0)[68:hps_main]CPU2: shutdown

[   28.342365] <0>.(0)[68:hps_main]cpufreq: cpufreq_policy_put_kobj[1078], after kobject_put(kobj), refcount=0l;

[   28.343720] <0>.(0)[68:hps_main][HPS] (0400)(1)(1)action end(3)(4)(0)(0) (2)(2)(2)(2)(2)(2)(2)(2)(1)(0) (3)(10)(0) (77)(10)(0) (0)(4)(10)(0)(4)

[   28.810012] <0>.(0)[165:bat_thread_kthr]total_time_plug_in(21), cv(-1)

[   28.826063] <0>.(0)[165:bat_thread_kthr][select_jeita_cv] CV(4352000) custom CV(-1)

[   28.835391] <0>-(0)[165:bat_thread_kthr]mtk_rtc_hal_common: rtc_spare_reg[0] = {57372, 127, 8}

[   28.838773] <0>.(0)[232:healthd]healthd: battery l=84 v=4135 t=24.0 h=2 st=2 chg=u

[   30.909555] <0>.(0)[171:vcorefs][VcoreFS] vcorefs_kthread[696], vcore_dvfs_before_late_init=1, dtcm_ready=0, md32_mobile_log_ready=0

[   31.065409] <0>.(0)[1:init]init: starting service 'vendor.hwcomposer-2-1'...

[   31.183809] <0>.(0)[883:android.hardwar][DISP][mtk_disp_mgr_ioctl #2216]ERROR:[session]ioctl not supported, 0x403c4fda

[   31.192528] <0>.(0)[1:init]init: File /vendor/bin/teed(labeled "u:object_r:vendor_file:s0") has incorrect label or no domain transition from u:r:init:s0 to another SELinux domain defined. Have you configured your service correctly? https://source.android.com/security/selinux/device-policy#label_new_services_and_address_denials

[   31.196297] <0>.(0)[1:init]init: starting service 'teed'...

[   31.199592] <0>.(0)[77:hang_detect][Hang_Detect] hang_detect disabled.

[   31.262855] <0>.(0)[1:init]init: Service 'teed' (pid 890) exited with status 253

[   31.263810] <0>.(0)[1:init]init: Sending signal 9 to service 'teed' (pid 890) process group...

[   31.265015] <0>.(0)[1:init]libprocessgroup: Successfully killed process cgroup uid 1000 pid 890 in 0ms

[   31.321592] <0>.(0)[1:init]init: Untracked pid 891 exited with status 0

[   31.322571] <0>.(0)[1:init]init: Untracked pid 893 exited with status 0

[   31.336471] <0>.(0)[1:init]init: Service 'vendor.hwcomposer-2-1' (pid 883) received signal 6

[   31.337562] <0>.(0)[1:init]init: Sending signal 9 to service 'vendor.hwcomposer-2-1' (pid 883) process group...

[   31.339223] <0>.(0)[1:init]libprocessgroup: Successfully killed process cgroup uid 1000 pid 883 in 0ms

[   31.341617] <0>.(0)[68:hps_main][HPS] (0080)(1)(0)action end(95)(414)(0)(0) (2)(2)(2)(2)(2)(2)(2)(2)(1)(0) (95)(15)(0) (0)(0)(0) (0)(414)(15)(0)(414)

[   33.430591] <0>.(0)[68:hps_main]CPU1: shutdown

[   33.432116] <0>.(0)[68:hps_main][HPS] (0200)(2)(0)action end(6)(5)(0)(0) (2)(2)(2)(2)(2)(2)(2)(2)(1)(0) (6)(10)(0) (69)(10)(0) (0)(5)(10)(0)(5)

[   33.919557] <0>.(0)[171:vcorefs][VcoreFS] vcorefs_kthread[696], vcore_dvfs_before_late_init=1, dtcm_ready=0, md32_mobile_log_ready=0

[   36.070249] <0>.(0)[1:init]init: starting service 'vendor.hwcomposer-2-1'...

[   36.186995] <0>.(0)[986:android.hardwar][DISP][mtk_disp_mgr_ioctl #2216]ERROR:[session]ioctl not supported, 0x403c4fda

[   36.198352] <0>.(0)[1:init]init: File /vendor/bin/teed(labeled "u:object_r:vendor_file:s0") has incorrect label or no domain transition from u:r:init:s0 to another SELinux domain defined. Have you configured your service correctly? https://source.android.com/security/selinux/device-policy#label_new_services_and_address_denials

[   36.203250] <0>.(0)[1:init]init: starting service 'teed'...

[   36.234132] <0>.(0)[68:hps_main][HPS] (0004)(1)(0)action end(82)(420)(0)(2) (2)(2)(2)(2)(2)(2)(2)(2)(1)(0) (8)(13)(0) (0)(0)(0) (0)(14)(13)(0)(14)

[   36.250737] <0>.(0)[1:init]init: Service 'teed' (pid 993) exited with status 253

[   36.251694] <0>.(0)[1:init]init: Sending signal 9 to service 'teed' (pid 993) process group...

[   36.254155] <0>.(0)[1:init]libprocessgroup: Successfully killed process cgroup uid 1000 pid 993 in 0ms

[   36.314976] <0>.(0)[1:init]init: Untracked pid 994 exited with status 0

[   36.316003] <0>.(0)[1:init]init: Service 'vendor.hwcomposer-2-1' (pid 986) received signal 6

[   36.317073] <0>.(0)[1:init]init: Sending signal 9 to service 'vendor.hwcomposer-2-1' (pid 986) process group...

[   36.318638] <0>.(0)[1:init]libprocessgroup: Successfully killed process cgroup uid 1000 pid 986 in 0ms

[   36.320309] <2>.(2)[1:init]init: Untracked pid 998 exited with status 0

[   36.929545] <0>.(0)[171:vcorefs][VcoreFS] vcorefs_kthread[696], vcore_dvfs_before_late_init=1, dtcm_ready=0, md32_mobile_log_ready=0