Not a member of Pastebin yet?
Sign Up,
it unlocks many cool features!
- U-Boot 2020.01+olimex-1-20200522.093428 (Jan 30 2020 - 11:10:18 +0000) Allwinner Technology
- CPU: Allwinner A20 (SUN7I)
- ID: A20-OLinuXino-LIME Rev.A
- SN: 00000000
- MAC: FF:FF:FF:FF:FF:FF
- I2C: ready
- DRAM: 1 GiB
- MMC: mmc@1c0f000: 0
- Loading Environment from EXT4... OK
- HDMI connected: Setting up a 1366x768 hdmi console (overscan 0x0)
- In: serial
- Out: vga
- Err: vga
- Allwinner mUSB OTG (Peripheral)
- Net: eth0: ethernet@1c50000
- Warning: usb_ether using MAC address from ROM
- , eth1: usb_ether
- starting USB...
- Bus usb@1c14000: USB EHCI 1.00
- Bus usb@1c14400: USB OHCI 1.0
- Bus usb@1c1c000: USB EHCI 1.00
- Bus usb@1c1c400: USB OHCI 1.0
- scanning bus usb@1c14000 for devices... 1 USB Device(s) found
- scanning bus usb@1c14400 for devices... 1 USB Device(s) found
- scanning bus usb@1c1c000 for devices... 1 USB Device(s) found
- scanning bus usb@1c1c400 for devices... 1 USB Device(s) found
- scanning usb for storage devices... 0 Storage Device(s) found
- Hit any key to stop autoboot: 2 1 0
- switch to partitions #0, OK
- mmc0 is current device
- Scanning mmc 0:1...
- Found U-Boot script /boot/boot.scr
- 1933 bytes read in 3 ms (628.9 KiB/s)
- ## Executing script at 43100000
- Boot script loaded from mmc
- Checking for /uEnv.txt...
- Checking for /boot/uEnv.txt...
- 400 bytes read in 2 ms (195.3 KiB/s)
- Loaded environment from /boot/uEnv.txt
- Loading FIT image...
- 15910243 bytes read in 874 ms (17.4 MiB/s)
- ## Loading kernel from FIT Image at 58000000 ...
- Using 'config-7739' configuration
- Trying 'kernel-1' kernel subimage
- Description: Linux kernel 5.6.14-olimex
- Type: Kernel Image
- Compression: uncompressed
- Data Start: 0x580000d0
- Data Size: 8179152 Bytes = 7.8 MiB
- Architecture: ARM
- OS: Linux
- Load Address: 0x40080000
- Entry Point: 0x40080000
- Hash algo: crc32
- Hash value: aa304b5b
- Hash algo: sha1
- Hash value: 9bc8b89011684d0a4fd945cb58e960e6a48b1e89
- Verifying Hash Integrity ... crc32+ sha1+ OK
- ## Loading ramdisk from FIT Image at 58000000 ...
- Using 'config-7739' configuration
- Trying 'ramdisk-1' ramdisk subimage
- Description: Ramdisk for kernel 5.6.14-olimex
- Type: RAMDisk Image
- Compression: Unknown Compression
- Data Start: 0x587ccfd4
- Data Size: 7285669 Bytes = 6.9 MiB
- Architecture: ARM
- OS: Linux
- Load Address: 0x4fe00000
- Entry Point: 0x4fe00000
- Hash algo: crc32
- Hash value: de8b1b76
- Hash algo: sha1
- Hash value: 670304b803971ec4a85c8b1fae1e0cfb0fa531b1
- Verifying Hash Integrity ... crc32+ sha1+ OK
- Loading ramdisk from 0x587ccfd4 to 0x4fe00000
- WARNING: 'compression' nodes for ramdisks are deprecated, please fix your .its file!
- ## Loading fdt from FIT Image at 58000000 ...
- Using 'config-7739' configuration
- Trying 'fdt-1' fdt subimage
- Description: unavailable
- Type: Flat Device Tree
- Compression: uncompressed
- Data Start: 0x58ebfc68
- Data Size: 40324 Bytes = 39.4 KiB
- Architecture: ARM
- Load Address: 0x4fa00000
- Hash algo: crc32
- Hash value: 05046816
- Hash algo: sha1
- Hash value: f201f2fbdc3af7347ee15c6f2519c2ba1e7844b9
- Verifying Hash Integrity ... crc32+ sha1+ OK
- Loading fdt from 0x58ebfc68 to 0x4fa00000
- Booting using the fdt blob at 0x4fa00000
- EHCI failed to shut down host controller.
- Loading Kernel Image
- Loading Ramdisk to 4990d000, end 49fffba5 ... OK
- Loading Device Tree to 49900000, end 4990cd83 ... OK
- Starting kernel ...
- [ 0.003289] /cpus/cpu@0 missing clock-frequency property
- [ 0.003321] /cpus/cpu@1 missing clock-frequency property
- [ 3.101062] sun4i-usb-phy 1c13400.phy: Couldn't request ID GPIO
- Loading, please wait...
- starting version 237
- [ 5.036869] lima 1c40000.gpu: IRQ ppmmu2 not found
- [ 5.041825] lima 1c40000.gpu: IRQ ppmmu3 not found
- [ 5.046959] lima 1c40000.gpu: IRQ pp2 not found
- [ 5.051602] lima 1c40000.gpu: IRQ pp3 not found
- Begin: Loading essential drivers ... done.
- Begin: Running /scripts/init-premount ... done.
- Begin: Mounting root file system ... Begin: Running /scripts/local-top ... done.
- Begin: Running /scripts/local-premount ... done.
- Warning: fsck not present, so skipping root file system
- done.
- Begin: Running /scripts/local-bottom ... done.
- Begin: Running /scripts/init-bottom ... done.
- Welcome to Ubuntu 18.04 LTS!
- [ OK ] Created slice System Slice.
- [ OK ] Set up automount Arbitrary Executabrmats File System Automount Point.
- [ OK ] Listening on Journal Socket (/dev/log).
- [ OK ] Reached target User and Group Name Lookups.
- [ OK ] Listening on Journal Socket.
- Starting Nameserver information manager...
- Starting Restore / save the current clock...
- [ OK ] Listening on fsck to fsckd communication Socket.
- Starting File System Check on Root Device...
- Mounting Kernel Debug File System...
- [ OK ] Created slice User and Session Slice.
- [ OK ] Reached target Slices.
- [ OK ] Listening on udev Control Socket.
- [ OK ] Listening on udev Kernel Socket.
- Starting udev Coldplug all Devices...
- [ OK ] Started Forward Password Requests to Wall Directory Watch.
- [ OK ] Reached target Remote File Systems.
- [ OK ] Created slice system-serial\x2dgetty.slice.
- [ OK ] Listening on Syslog Socket.
- Starting Load Kernel Modules...
- Starting Create list of required stce nodes for the current kernel...
- [ OK ] Listening on /dev/initctl Compatibility Named Pipe.
- [ OK ] Reached target Swap.
- Starting Set the console keyboard layout...
- Mounting POSIX Message Queue File System...
- [ OK ] Listening on Journal Audit Socket.
- Starting Journal Service...
- [ OK ] Started Restore / save the current clock.
- [ OK ] Started File System Check on Root Device.
- [ OK ] Mounted Kernel Debug File System.
- [FAILED] Failed to start Load Kernel Modules.
- See 'systemctl status systemd-modules-load.service' for details.
- [ OK ] Started Create list of required stavice nodes for the current kernel.
- [ OK ] Mounted POSIX Message Queue File System.
- [ OK ] Started Nameserver information manager.
- [ OK ] Started File System Check Daemon to report status.
- [ OK ] Reached target Network (Pre).
- Starting Create Static Device Nodes in /dev...
- Starting Apply Kernel Variables...
- Mounting Kernel Configuration File System...
- Starting Remount Root and Kernel File Systems...
- [ OK ] Mounted Kernel Configuration File System.
- [ OK ] Started Remount Root and Kernel File Systems.
- Starting Load/Save Random Seed...
- [ OK ] Started Create Static Device Nodes in /dev.
- [ OK ] Started Apply Kernel Variables.
- Starting udev Kernel Device Manager...
- [ OK ] Started Journal Service.
- Starting Flush Journal to Persistent Storage...
- [ OK ] Started Load/Save Random Seed.
- [ OK ] Started Flush Journal to Persistent Storage.
- [ OK ] Started Set the console keyboard layout.
- [ OK ] Reached target Local File Systems (Pre).
- [ OK ] Reached target Local File Systems.
- Starting Set console font and keymap...
- Starting Create Volatile Files and Directories...
- Starting Tell Plymouth To Write Out Runtime Data...
- Starting Raise network interfaces...
- [ OK ] Started udev Kernel Device Manager.
- [ OK ] Started Set console font and keymap.
- [ OK ] Started Tell Plymouth To Write Out Runtime Data.
- [ OK ] Started Create Volatile Files and Directories.
- [ OK ] Started Entropy daemon using the HAVEGE algorithm.
- Starting Network Time Synchronization...
- Starting Network Name Resolution...
- Starting Update UTMP about System Boot/Shutdown...
- [ OK ] Started Update UTMP about System Boot/Shutdown.
- [ OK ] Started Network Time Synchronization.
- [ OK ] Reached target System Time Synchronized.
- [ OK ] Found device /dev/ttyGS0.
- [ OK ] Started Network Name Resolution.
- [ OK ] Reached target Host and Network Name Lookups.
- [ OK ] Started Raise network interfaces.
- [ OK ] Started udev Coldplug all Devices.
- [ OK ] Started Dispatch Password Requests to Console Directory Watch.
- [ OK ] Reached target Local Encrypted Volumes.
- [ OK ] Reached target System Initialization.
- [ OK ] Listening on CUPS Scheduler.
- [ OK ] Listening on D-Bus System Message Bus Socket.
- Starting Olinuxino FirstBoot...
- Starting Olinuxino Expand Root Partition...
- [ OK ] Started Discard unused blocks once a week.
- [ OK ] Started Message of the Day.
- [ OK ] Started Daily apt download activities.
- [ OK ] Started CUPS Scheduler.
- [ OK ] Started Daily Cleanup of Temporary Directories.
- [ OK ] Started resolvconf-pull-resolved.path.
- [ OK ] Reached target Paths.
- [ OK ] Listening on Avahi mDNS/DNS-SD Stack Activation Socket.
- [ OK ] Reached target Sockets.
- [ OK ] Started Daily apt upgrade and clean activities.
- [ OK ] Reached target Timers.
- [ OK ] Reached target Sound Card.
- [ OK ] Found device /dev/ttyS0.
- [ OK ] Started Olinuxino FirstBoot.
- [ OK ] Started ifup for eth0.
- [ OK ] Started Olinuxino Expand Root Partition.
- [ OK ] Reached target Basic System.
- Starting Initialize hardware monitoring sensors...
- Starting Dispatcher daemon for systemd-networkd...
- Starting LSB: Load kernel modules needed to enable cpufreq scaling...
- Starting resolvconf-pull-resolved.service...
- Starting LSB: Speech Dispatcher...
- Starting Save/Restore Sound Card State...
- Starting LCD-OLinuXino RTP calibrabion...
- Starting Disk Manager...
- Starting Modem Manager...
- Starting System Logging Service...
- [ OK ] Started CUPS Scheduler.
- [ OK ] Started Realtek H5 bluetooth support.
- Starting Restore /etc/resolv.conf ifore the ppp link was shut down...
- [ OK ] Started Regular background program processing daemon.
- Starting Accounts Service...
- [ OK ] Started D-Bus System Message Bus.
- Starting Network Manager...
- Starting WPA supplicant...
- Starting Login Service...
- [ OK ] Started Olinuxino Defaults.
- Starting Avahi mDNS/DNS-SD Stack...
- Starting Resets System Activity Data Collector...
- Starting LSB: automatic crash report generation...
- [ OK ] Started Set the CPU Frequency Scaling governor.
- [ OK ] Started System Logging Service.
- [ OK ] Started resolvconf-pull-resolved.service.
- [ OK ] Started LCD-OLinuXino RTP calibrabion.
- [ OK ] Started Restore /etc/resolv.conf ifbefore the ppp link was shut down.
- [ OK ] Started Resets System Activity Data Collector.
- [ OK ] Started Initialize hardware monitoring sensors.
- [ OK ] Started Save/Restore Sound Card State.
- [ OK ] Started LSB: Speech Dispatcher.
- [ OK ] Started Avahi mDNS/DNS-SD Stack.
- [ OK ] Started LSB: automatic crash report generation.
- [ OK ] Started Login Service.
- [ OK ] Started WPA supplicant.
- Starting Authorization Manager...
- Stopping Network Name Resolution...
- [ OK ] Started Make remote CUPS printers available locally.
- [ OK ] Stopped Network Name Resolution.
- [ OK ] Started LSB: Load kernel modules needed to enable cpufreq scaling.
- Starting Hostname Service...
- Starting LSB: set CPUFreq kernel parameters...
- Starting Network Name Resolution...
- [ OK ] Started Authorization Manager.
- [ OK ] Started Accounts Service.
- [ OK ] Started Modem Manager.
- [ OK ] Started Hostname Service.
- [ OK ] Started LSB: set CPUFreq kernel parameters.
- Starting LSB: Set sysfs variables from /etc/sysfs.conf...
- [ OK ] Started Network Manager.
- [ OK ] Started Network Name Resolution.
- Starting resolvconf-pull-resolved.service...
- [ OK ] Listening on Load/Save RF Kill Switch Status /dev/rfkill Watch.
- Starting Network Manager Script Dispatcher Service...
- [ OK ] Reached target Network.
- [ OK ] Started Unattended Upgrades Shutdown.
- Starting Permit User Sessions...
- Starting OpenBSD Secure Shell server...
- Starting OpenVPN service...
- Starting Network Manager Wait Online...
- [ OK ] Started LSB: Set sysfs variables from /etc/sysfs.conf.
- [ OK ] Started Permit User Sessions.
- [ OK ] Started OpenVPN service.
- [ OK ] Started Network Manager Script Dispatcher Service.
- Starting Hold until boot process finishes up...
- Starting Light Display Manager...
- [ OK ] Started Dispatcher daemon for systemd-networkd.
- [ OK ] Started Hold until boot process finishes up.
- [ OK ] Started Disk Manager.
- [ OK ] Started Serial Getty on ttyS0.
- [ OK ] Started Serial Getty on ttyGS0.
- Starting Set console scheme...
- [ OK ] Started resolvconf-pull-resolved.service.
- [ OK ] Started OpenBSD Secure Shell server.
- [ OK ] Started Set console scheme.
- [ OK ] Created slice system-getty.slice.
- [ OK ] Started Getty on tty1.
- [ OK ] Reached target Login Prompts.
- [ OK ] Started Network Manager Wait Online.
- [ OK ] Reached target Network is Online.
- Starting LSB: disk temperature monitoring daemon...
- [ OK ] Started LSB: disk temperature monitoring daemon.
- [ OK ] Reached target Multi-User System.
- [ OK ] Started Light Display Manager.
- [ OK ] Reached target Graphical Interface.
- Starting Update UTMP about System Runlevel Changes...
- [ OK ] Started Update UTMP about System Runlevel Changes.
- Ubuntu 18.04 LTS a20-olinuxino ttyS0
- a20-olinuxino login:
- root
- Password:
- Welcome to Ubuntu 18.04 LTS (GNU/Linux 5.6.14-olimex armv7l)
- * Documentation: https://help.ubuntu.com
- * Management: https://landscape.canonical.com
- * Support: https://ubuntu.com/advantage
- The programs included with the Ubuntu system are free software;
- the exact distribution terms for each program are described in the
- individual files in /usr/share/doc/*/copyright.
- Ubuntu comes with ABSOLUTELY NO WARRANTY, to the extent permitted by
- applicable law.
- root@a20-olinuxino:~# ping www./ google.com
- PING www.google.com (172.217.169.164) 56(84) bytes of data.
- 64 bytes from sof02s33-in-f4.1e100.net (172.217.169.164): icmp_seq=1 ttl=120 time=3.56 ms
- 64 bytes from sof02s33-in-f4.1e100.net (172.217.169.164): icmp_seq=2 ttl=120 time=3.48 ms
- 64 bytes from sof02s33-in-f4.1e100.net (172.217.169.164): icmp_seq=3 ttl=120 time=3.70 ms
- 64 bytes from sof02s33-in-f4.1e100.net (172.217.169.164): icmp_seq=4 ttl=120 time=3.49 ms
- ^C
- --- www.google.com ping statistics ---
- 4 packets transmitted, 4 received, 0% packet loss, time 3005ms
- rtt min/avg/max/mdev = 3.488/3.563/3.704/0.105 ms
- root@a20-olinuxino:~# reboot
- [ OK ] Stopped target Sound Card.
- [ OK ] Closed Load/Save RF Kill Switch Status /dev/rfkill Watch.
- Stopping RealtimeKit Scheduling Policy Service...
- [ OK ] Stopped target Host and Network Name Lookups.
- Stopping Au Stopping Session 2 of user root.
- Stopping User Manager for UID 0...
- Stopping Save/Restore Sound Card State...
- [ OK ] Stopped target System Time Synchronized.
- Stopping Daemon for power management...
- Stopping Session c1 of user olimex.
- [ OK ] Stopped target Graphical Interface.
- Stopping Light Display Manager...
- Stopping Disk Manager...
- [ OK ] Stopped Daily Cleanup of Temporary Directories.
- [ OK ] Stopped target Multi-User System.
- Stopping OpenBSD Secure Shell server...
- Stopping Make remote CUPS printers available locally...
- Stopping LSB: automatic crash report generation...
- Stopping System Logging Service...
- Stopping Unattended Upgrades Shutdown...
- Stopping LSB: disk temperature monitoring daemon...
- [ OK ] Stopped target Login Prompts.
- Stopping Getty on tty1...
- Stopping Serial Getty on ttyS0...
- Stopping Serial Getty on ttyGS0...
- [ OK ] Stopped OpenVPN service.
- Stopping LSB: Set sysfs variables from /etc/sysfs.conf...
- Stopping Dispatcher daemon for systemd-networkd...
- [ OK ] Stopped Initialize hardware monitoring sensors.
- Stopping LSB: Speech Dispatcher...
- [ OK ] Stopped Resets System Activity Data Collector.
- Stopping Modem Manager...
- Stopping Regular background program processing daemon...
- Stopping Accounts Service...
- [ OK ] Unmounted /run/user/1000/gvfs.
- [ OK ] Stopped Dispatcher daemon for systemd-networkd.
- [ OK ] Stopped Disk Manager.
- [ OK ] Stopped Modem Manager.
- [ OK ] Stopped System Logging Service.
- [ OK ] Stopped Regular background program processing daemon.
- [ OK ] Stopped Accounts Service.
- [ OK ] Stopped Authorization Manager.
- [ OK ] Stopped Make remote CUPS printers available locally.
- [ OK ] Stopped OpenBSD Secure Shell server.
- [ OK ] Stopped Serial Getty on ttyS0.
- [ OK ] Stopped Serial Getty on ttyGS0.
- [ OK ] Stopped Getty on tty1.
- [ OK ] Stopped User Manager for UID 1000.
- [ OK ] Stopped RealtimeKit Scheduling Policy Service.
- [ OK ] Stopped Daemon for power management.
- [ OK ] Stopped User Manager for UID 0.
- [ OK ] Stopped Save/Restore Sound Card State.
- [ OK ] Stopped Session 2 of user root.
- [ OK ] Stopped Session c1 of user olimex.
- [ OK ] Stopped LSB: automatic crash report generation.
- [ OK ] Stopped LSB: Set sysfs variables from /etc/sysfs.conf.
- [ OK ] Stopped LSB: disk temperature monitoring daemon.
- [ OK ] Stopped LSB: Speech Dispatcher.
- [ OK ] Stopped target Network is Online.
- [ OK ] Stopped Network Manager Wait Online.
- Stopping LSB: set CPUFreq kernel parameters...
- [ OK ] Removed slice User Slice of root.
- [ OK ] Removed slice User Slice of olimex.
- Stopping Login Service...
- [ OK ] Removed slice system-getty.slice.
- [ OK ] Removed slice system-serial\x2dgetty.slice.
- Stopping Avahi mDNS/DNS-SD Stack...
- Stopping CUPS Scheduler...
- [ OK ] Stopped Login Service.
- [ OK ] Stopped CUPS Scheduler.
- [ OK ] Stopped Avahi mDNS/DNS-SD Stack.
- [ OK ] Stopped Unattended Upgrades Shutdown.
- [ OK ] Stopped Light Display Manager.
- [ OK ] Stopped LSB: set CPUFreq kernel parameters.
- Stopping LSB: Load kernel modules needed to enable cpufreq scaling...
- Stopping Permit User Sessions...
- [ OK ] Stopped Permit User Sessions.
- [ OK ] Stopped target Network.
- Stopping WPA supplicant...
- Stopping ifup for eth0...
- Stopping Network Name Resolution...
- Stopping Raise network interfaces...
- Stopping Network Manager...
- [ OK ] Stopped target User and Group Name Lookups.
- [ OK ] Stopped WPA supplicant.
- [ OK ] Stopped Network Name Resolution.
- [ OK ] Stopped Network Manager.
- Stopping D-Bus System Message Bus...
- [ OK ] Stopped D-Bus System Message Bus.
- [ OK ] Stopped LSB: Load kernel modules needed to enable cpufreq scaling.
- [ OK ] Stopped target Remote File Systems.
- [ OK ] Stopped target Basic System.
- [ OK ] Stopped target Paths.
- [ OK ] Stopped resolvconf-pull-resolved.path.
- [ OK ] Stopped CUPS Scheduler.
- [ OK ] Stopped target Slices.
- [ OK ] Removed slice User and Session Slice.
- [ OK ] Stopped target Sockets.
- [ OK ] Closed CUPS Scheduler.
- [ OK ] Closed Avahi mDNS/DNS-SD Stack Activation Socket.
- [ OK ] Closed Syslog Socket.
- [ OK ] Closed D-Bus System Message Bus Socket.
- [ OK ] Stopped target System Initialization.
- [ OK ] Stopped target Local Encrypted Volumes.
- [ OK ] Stopped Dispatch Password Requests to Console Directory Watch.
- [ OK ] Stopped Forward Password Requests to Wall Directory Watch.
- Stopping Load/Save Random Seed...
- Stopping Network Time Synchronization...
- Stopping Restore / save the current clock...
- Stopping Update UTMP about System Boot/Shutdown...
- [ OK ] Stopped Network Time Synchronization.
- [ OK ] Stopped Raise network interfaces.
- [ OK ] Stopped Load/Save Random Seed.
- [ OK ] Stopped Restore / save the current clock.
- [ OK ] Stopped Update UTMP about System Boot/Shutdown.
- [ OK ] Stopped Create Volatile Files and Directories.
- [ OK ] Stopped ifup for eth0.
- [ OK ] Stopped target Network (Pre).
- [ OK ] Stopped target Local File Systems.
- Unmounting /run/user/1000...
- Unmounting /run/user/0...
- [ OK ] Stopped Apply Kernel Variables.
- [ OK ] Unmounted /run/user/1000.
- [ OK ] Unmounted /run/user/0.
- [ OK ] Reached target Unmount All Filesystems.
- [ OK ] Stopped target Swap.
- [ OK ] Stopped target Local File Systems (Pre).
- [ OK ] Stopped Create Static Device Nodes in /dev.
- [ OK ] Stopped Remount Root and Kernel File Systems.
- [ OK ] Reached target Shutdown.
- [ OK ] Reached target Final Step.
- Starting Reboot...
- [ 170.397884] reboot: Restarting system
- U-Boot SPL 2020.01+olimex-1-20200522.093428 (Jan 30 2020 - 11:10:18 +0000)
- DRAM: 1024 MiB
- CPU: 912000000Hz, AXI/AHB/APB: 3/2/2
- Loading configuration from EEPROM: Error
- Loading configuration from MMC: OK
- Verifying data: Error
- Error
- WARNING: The board cannot be detected!
- Please run:
- 'olinuxino config list' - Select your board
- 'olinuxino config write' - Store the board configuration
- 'reset' - Reset the board and load the configuration
- Using 'A20-OLinuXino-LIME' as fallback configuration.
- Trying to boot from MMC1
- U-Boot 2020.01+olimex-1-20200522.093428 (Jan 30 2020 - 11:10:18 +0000) Allwinner Technology
- CPU: Allwinner A20 (SUN7I)
- ID: A20-OLinuXino-LIME Rev.A
- SN: 00000000
- MAC: FF:FF:FF:FF:FF:FF
- I2C: ready
- DRAM: 1 GiB
- MMC: mmc@1c0f000: 0
- Loading Environment from EXT4... OK
- HDMI connected: Setting up a 1366x768 hdmi console (overscan 0x0)
- In: serial
- Out: vga
- Err: vga
- Allwinner mUSB OTG (Peripheral)
- Net: eth0: ethernet@1c50000
- Warning: usb_ether using MAC address from ROM
- , eth1: usb_ether
- starting USB...
- Bus usb@1c14000: USB EHCI 1.00
- Bus usb@1c14400: USB OHCI 1.0
- Bus usb@1c1c000: USB EHCI 1.00
- Bus usb@1c1c400: USB OHCI 1.0
- scanning bus usb@1c14000 for devices... 1 USB Device(s) found
- scanning bus usb@1c14400 for devices... 1 USB Device(s) found
- scanning bus usb@1c1c000 for devices... 1 USB Device(s) found
- scanning bus usb@1c1c400 for devices... 1 USB Device(s) found
- scanning usb for storage devices... 0 Storage Device(s) found
- Hit any key to stop autoboot: 2 0
- => olinuxino
- olinuxino - OLinuXino board configurator
- Usage:
- olinuxino
- olinuxino config info- Print current configuration: ID, serial, ram, storage, grade...
- olinuxino config list- Print supported boards and their IDs
- olinuxino config erase- Erase currently stored configuration
- olinuxino config write [id] [revision] [serial] [mac]
- arguments:
- [id]- Specific board ID
- [revision]- Board revision: C, D1, etc...
- [serial]- New serial number for the board
- [mac]- New MAC address for the board
- Format can be:
- aa:bb:cc:dd:ee:ff
- FF:FF:FF:FF:FF:FF
- aabbccddeeff
- olinuxino monitor list- Print supported video outputs
- olinuxino monitor set- Set specific LCD
- => olinuxino config list
- Supported boards:
- ----------------------------------------
- A20-OLinuXino-LIME - 7739
- A20-OLinuXino-LIME-n4GB - 7743
- A20-OLinuXino-LIME-n8G - 8934
- A20-OLinuXino-LIME-s16MB - 9076
- A20-OLinuXino-LIME-e4GB - 9160
- A20-OLinuXino-LIME-e16Gs16M - 9516
- A20-OLinuXino-LIME-e4Gs16M - 9696
- T2-OLinuXino-LIME-IND - 9211
- T2-OLinuXino-LIME-s16MB-IND - 9215
- T2-OLinuXino-LIME-e4G-IND - 9219
- T2-OLinuXino-LIME-e4Gs16M-IND - 9734
- A20-OLinuXino-LIME2 - 7701
- A20-OLinuXino-LIME2-e4GB - 8340
- A20-OLinuXino-LIME2-e16GB - 9166
- A20-OLinuXino-LIME2-n4GB - 7624
- A20-OLinuXino-LIME2-n8GB - 8910
- A20-OLinuXino-LIME2-s16M - 8946
- A20-OLinuXino-LIME2-e16Gs16M - 9604
- A20-OLinuXino-LIME2-e4Gs16M - 9613
- A20-OLinuXino-LIME2-G2 - 9905
- T2-OLinuXino-LIME2-IND - 9239
- T2-OLinuXino-LIME2-s16M-IND - 9247
- T2-OLinuXino-LIME2-e8Gs16M-IND - 9243
- A20-OLinuXino-MICRO - 4614
- A20-OLinuXino-MICRO-n4GB - 4615
- A20-OLinuXino-MICRO-e4GB-IND - 8661
- A20-OLinuXino-MICRO-IND - 8828
- A20-OLinuXino-MICRO-e4GB - 8832
- A20-OLinuXino-MICRO-n8G - 8918
- A20-OLinuXino-MICRO-e16G - 9042
- A20-OLinuXino-MICRO-s16M - 9231
- A20-OLinuXino-MICRO-e4Gs16M - 9684
- A20-OLinuXino-MICRO-e16Gs16M - 9689
- T2-OLinuXino-MICRO-IND - 9223
- T2-OLinuXino-MICRO-e4G-IND - 9227
- T2-OLinuXino-MICRO-s16M-IND - 9235
- T2-OLinuXino-MICRO-e4Gs16M-IND - 9739
- T2-OLinuXino-MICRO-e8Gs16M-IND - 9789
- A20-SOM-n4GB - 4673
- A20-SOM - 7664
- A20-SOM-IND - 8849
- A20-SOM-n8GB - 8922
- A20-SOM-e16GB - 9155
- A20-SOM-e16GB-IND - 9148
- A20-SOM-e16Gs16M - 9047
- T2-SOM-IND - 9259
- T2-SOM-e8Gs16M-IND - 9827
- A20-SOM204-1G - 8991
- A20-SOM204-1Gs16Me16G-MC - 8958
- A20-SOM204-1G-M - 10257
- T2-SOM204-1Gs16Me4G-C-I - 10157
- T2-SOM204-1Gs16Me8G-MC-I - 10234
- T2-SOM204-1G-I - 10238
- => olinuxino config A20-OLinuXino-MICRO-n4GB Rev.F
- Unknown command 'A20-OLinuXino-MICRO-n4GB' - try 'help'
- => SN: 00046152
- Unknown command 'SN:' - try 'help'
- => MAC: 02:C8:0B:41:74:0B
- Unknown command 'MAC:' - try 'help'
- => 02 olinuxino config write 8918 f 00046152 02:C8:0B:41:74:0B
- Erasing EEPROM configuration...
- Writting EEPROM configuration...
- Writting MMC configuration...
- => saveenv
- Saving Environment to EXT4... File System is consistent
- file found, deleting
- update journal finished
- File System is consistent
- update journal finished
- done
- OK
- => reset
- resetting ...
- U-Boot SPL 2020.01+olimex-1-20200522.093428 (Jan 30 2020 - 11:10:18 +0000)
- DRAM: 1024 MiB
- CPU: 912000000Hz, AXI/AHB/APB: 3/2/2
- Loading configuration from EEPROM: OK
- Verifying data: OK
- Trying to boot from MMC1
- U-Boot 2020.01+olimex-1-20200522.093428 (Jan 30 2020 - 11:10:18 +0000) Allwinner Technology
- CPU: Allwinner A20 (SUN7I)
- ID: A20-OLinuXino-MICRO-n8G Rev.F
- SN: 00046152
- MAC: 02:C8:0B:41:74:0B
- I2C: ready
- DRAM: 1 GiB
- MMC: mmc@1c0f000: 0, mmc@1c12000: 1
- Loading Environment from EXT4... OK
- HDMI connected: Setting up a 1366x768 hdmi console (overscan 0x0)
- In: serial
- Out: vga
- Err: vga
- Allwinner mUSB OTG (Peripheral)
- Net: eth0: ethernet@1c50000, eth1: usb_ether
- starting USB...
- Bus usb@1c14000: USB EHCI 1.00
- Bus usb@1c14400: USB OHCI 1.0
- Bus usb@1c1c000: USB EHCI 1.00
- Bus usb@1c1c400: USB OHCI 1.0
- scanning bus usb@1c14000 for devices... 1 USB Device(s) found
- scanning bus usb@1c14400 for devices... 1 USB Device(s) found
- scanning bus usb@1c1c000 for devices... 1 USB Device(s) found
- scanning bus usb@1c1c400 for devices... 1 USB Device(s) found
- scanning usb for storage devices... 0 Storage Device(s) found
- Hit any key to stop autoboot: 2 1 0
- switch to partitions #0, OK
- mmc0 is current device
- Scanning mmc 0:1...
- Found U-Boot script /boot/boot.scr
- 1933 bytes read in 3 ms (628.9 KiB/s)
- ## Executing script at 43100000
- Boot script loaded from mmc
- Checking for /uEnv.txt...
- Checking for /boot/uEnv.txt...
- 400 bytes read in 1 ms (390.6 KiB/s)
- Loaded environment from /boot/uEnv.txt
- Loading FIT image...
- 15910243 bytes read in 874 ms (17.4 MiB/s)
- ## Loading kernel from FIT Image at 58000000 ...
- Using 'config-8918' configuration
- Trying 'kernel-1' kernel subimage
- Description: Linux kernel 5.6.14-olimex
- Type: Kernel Image
- Compression: uncompressed
- Data Start: 0x580000d0
- Data Size: 8179152 Bytes = 7.8 MiB
- Architecture: ARM
- OS: Linux
- Load Address: 0x40080000
- Entry Point: 0x40080000
- Hash algo: crc32
- Hash value: aa304b5b
- Hash algo: sha1
- Hash value: 9bc8b89011684d0a4fd945cb58e960e6a48b1e89
- Verifying Hash Integrity ... crc32+ sha1+ OK
- ## Loading ramdisk from FIT Image at 58000000 ...
- Using 'config-8918' configuration
- Trying 'ramdisk-1' ramdisk subimage
- Description: Ramdisk for kernel 5.6.14-olimex
- Type: RAMDisk Image
- Compression: Unknown Compression
- Data Start: 0x587ccfd4
- Data Size: 7285669 Bytes = 6.9 MiB
- Architecture: ARM
- OS: Linux
- Load Address: 0x4fe00000
- Entry Point: 0x4fe00000
- Hash algo: crc32
- Hash value: de8b1b76
- Hash algo: sha1
- Hash value: 670304b803971ec4a85c8b1fae1e0cfb0fa531b1
- Verifying Hash Integrity ... crc32+ sha1+ OK
- Loading ramdisk from 0x587ccfd4 to 0x4fe00000
- WARNING: 'compression' nodes for ramdisks are deprecated, please fix your .its file!
- ## Loading fdt from FIT Image at 58000000 ...
- Using 'config-8918' configuration
- Trying 'fdt-5' fdt subimage
- Description: unavailable
- Type: Flat Device Tree
- Compression: uncompressed
- Data Start: 0x58ee8d30
- Data Size: 43574 Bytes = 42.6 KiB
- Architecture: ARM
- Load Address: 0x4fa00000
- Hash algo: crc32
- Hash value: a2e02fd5
- Hash algo: sha1
- Hash value: f84484a830bb74a03da4718bd769ad38d210592d
- Verifying Hash Integrity ... crc32+ sha1+ OK
- Loading fdt from 0x58ee8d30 to 0x4fa00000
- Booting using the fdt blob at 0x4fa00000
- EHCI failed to shut down host controller.
- Loading Kernel Image
- Loading Ramdisk to 4990d000, end 49fffba5 ... OK
- Loading Device Tree to 498ff000, end 4990ca35 ... OK
- Starting kernel ...
- [ 0.003366] /cpus/cpu@0 missing clock-frequency property
- [ 0.003396] /cpus/cpu@1 missing clock-frequency property
- [ 3.103467] sun4i-usb-phy 1c13400.phy: Couldn't request ID GPIO
- Loading, please wait...
- starting version 237
- [ 5.034193] lima 1c40000.gpu: IRQ ppmmu2 not found
- [ 5.039342] lima 1c40000.gpu: IRQ ppmmu3 not found
- [ 5.044537] lima 1c40000.gpu: IRQ pp2 not found
- [ 5.049109] lima 1c40000.gpu: IRQ pp3 not found
- Begin: Loading essential drivers ... done.
- Begin: Running /scripts/init-premount ... done.
- Begin: Mounting root file system ... Begin: Running /scripts/local-top ... done.
- Begin: Running /scripts/local-premount ... done.
- Warning: fsck not present, so skipping root file system
- done.
- Begin: Running /scripts/local-bottom ... done.
- Begin: Running /scripts/init-bottom ... done.
- Welcome to Ubuntu 18.04 LTS!
- [ OK ] Reached target User and Group Name Lookups.
- [ OK ] Started Forward Password Requests to Wall Directory Watch.
- [ OK ] Created slice User and Session Slice.
- [ OK ] Reached target Swap.
- [ OK ] Reached target Remote File Systems.
- [ OK ] Created slice System Slice.
- [ OK ] Listening on Journal Socket (/dev/log).
- [ OK ] Listening on fsck to fsckd communication Socket.
- [ OK ] Listening on /dev/initctl Compatibility Named Pipe.
- [ OK ] Reached target Slices.
- [ OK ] Listening on udev Kernel Socket.
- [ OK ] Listening on Journal Audit Socket.
- [ OK ] Listening on Syslog Socket.
- [ OK ] Listening on udev Control Socket.
- [ OK ] Created slice system-serial\x2dgetty.slice.
- [ OK ] Listening on Journal Socket.
- Starting udev Coldplug all Devices...
- Starting Nameserver information manager...
- Starting Journal Service...
- Starting Set the console keyboard layout...
- Starting Create list of required stce nodes for the current kernel...
- Starting Restore / save the current clock...
- Mounting POSIX Message Queue File System...
- Starting File System Check on Root Device...
- Mounting Kernel Debug File System...
- Starting Load Kernel Modules...
- [ OK ] Set up automount Arbitrary Executabrmats File System Automount Point.
- [ OK ] Started Create list of required stavice nodes for the current kernel.
- [ OK ] Started Restore / save the current clock.
- [ OK ] Mounted POSIX Message Queue File System.
- [ OK ] Mounted Kernel Debug File System.
- [ OK ] Started Nameserver information manager.
- [ OK ] Started File System Check Daemon to report status.
- [ OK ] Reached target Network (Pre).
- Starting Create Static Device Nodes in /dev...
- [FAILED] Failed to start Load Kernel Modules.
- See 'systemctl status systemd-modules-load.service' for details.
- [ OK ] Started File System Check on Root Device.
- Starting Remount Root and Kernel File Systems...
- Mounting Kernel Configuration File System...
- Starting Apply Kernel Variables...
- [ OK ] Started Create Static Device Nodes in /dev.
- [ OK ] Mounted Kernel Configuration File System.
- [ OK ] Started Remount Root and Kernel File Systems.
- [ OK ] Started Apply Kernel Variables.
- Starting Load/Save Random Seed...
- Starting udev Kernel Device Manager...
- [ OK ] Started Journal Service.
- Starting Flush Journal to Persistent Storage...
- [ OK ] Started Load/Save Random Seed.
- [ OK ] Started Flush Journal to Persistent Storage.
- [ OK ] Started Set the console keyboard layout.
- [ OK ] Reached target Local File Systems (Pre).
- [ OK ] Reached target Local File Systems.
- Starting Raise network interfaces...
- Starting Tell Plymouth To Write Out Runtime Data...
- Starting Create Volatile Files and Directories...
- Starting Set console font and keymap...
- [ OK ] Started udev Kernel Device Manager.
- [ OK ] Started Tell Plymouth To Write Out Runtime Data.
- [ OK ] Started Set console font and keymap.
- [ OK ] Started Create Volatile Files and Directories.
- Starting Update UTMP about System Boot/Shutdown...
- [ OK ] Started Entropy daemon using the HAVEGE algorithm.
- Starting Network Name Resolution...
- Starting Network Time Synchronization...
- [ OK ] Started Update UTMP about System Boot/Shutdown.
- [ OK ] Started Network Name Resolution.
- [ OK ] Reached target Host and Network Name Lookups.
- [ OK ] Started Network Time Synchronization.
- [ OK ] Reached target System Time Synchronized.
- [ OK ] Found device /dev/ttyGS0.
- [ OK ] Started Raise network interfaces.
- [ OK ] Started udev Coldplug all Devices.
- [ OK ] Started Dispatch Password Requests to Console Directory Watch.
- [ OK ] Reached target Local Encrypted Volumes.
- [ OK ] Reached target System Initialization.
- [ OK ] Started Daily apt download activities.
- [ OK ] Started resolvconf-pull-resolved.path.
- [ OK ] Started Daily apt upgrade and clean activities.
- [ OK ] Started Message of the Day.
- [ OK ] Started Discard unused blocks once a week.
- [ OK ] Listening on Avahi mDNS/DNS-SD Stack Activation Socket.
- [ OK ] Listening on CUPS Scheduler.
- [ OK ] Started CUPS Scheduler.
- [ OK ] Reached target Paths.
- [ OK ] Listening on D-Bus System Message Bus Socket.
- [ OK ] Reached target Sockets.
- [ OK ] Reached target Basic System.
- Starting resolvconf-pull-resolved.service...
- Starting LSB: automatic crash report generation...
- Starting LCD-OLinuXino RTP calibrabion...
- Starting Initialize hardware monitoring sensors...
- Starting Dispatcher daemon for systemd-networkd...
- Starting System Logging Service...
- [ OK ] Started Realtek H5 bluetooth support.
- Starting Resets System Activity Data Collector...
- [ OK ] Started Regular background program processing daemon.
- [ 11.713892] debugfs: Directory '1c22c00.codec' with parent 'sun4i-codec' already present!
- [ OK ] Started Set the CPU Frequency Scaling governor.
- Starting Disk Manager...
- Starting LSB: Load kernel modules needed to enable cpufreq scaling...
- Starting LSB: Speech Dispatcher...
- Starting Login Service...
- [ OK ] Started D-Bus System Message Bus.
- [ OK ] Started Login Service.
- Starting WPA supplicant...
- Starting Network Manager...
- Starting Avahi mDNS/DNS-SD Stack...
- Starting Modem Manager...
- Starting Accounts Service...
- [ OK ] Started CUPS Scheduler.
- [ OK ] Started Daily Cleanup of Temporary Directories.
- [ OK ] Reached target Timers.
- Starting Restore /etc/resolv.conf ifore the ppp link was shut down...
- Starting Save/Restore Sound Card State...
- [ OK ] Started System Logging Service.
- [ OK ] Started resolvconf-pull-resolved.service.
- [ OK ] Started LCD-OLinuXino RTP calibrabion.
- [ OK ] Started Resets System Activity Data Collector.
- [ OK ] Started Restore /etc/resolv.conf ifbefore the ppp link was shut down.
- [ OK ] Started Initialize hardware monitoring sensors.
- [ OK ] Started Save/Restore Sound Card State.
- [ OK ] Found device /dev/ttyS0.
- [ OK ] Started LSB: automatic crash report generation.
- [ OK ] Started LSB: Speech Dispatcher.
- [ OK ] Started LSB: Load kernel modules needed to enable cpufreq scaling.
- Ubuntu 18.04 LTS a20-olinuxino ttyS0
- a20-olinuxino login:
- root
- Password:
- Last login: Fri Jun 12 07:25:23 UTC 2020 on ttyS0
- Welcome to Ubuntu 18.04 LTS (GNU/Linux 5.6.14-olimex armv7l)
- * Documentation: https://help.ubuntu.com
- * Management: https://landscape.canonical.com
- * Support: https://ubuntu.com/advantage
- root@a20-olinuxino:~# olinuxino config write 8918 f 00046152 02:C8:0B:41:74:0B ~ ping www.google.com
- PING www.google.com (172.217.169.100) 56(84) bytes of data.
- 64 bytes from sof02s31-in-f4.1e100.net (172.217.169.100): icmp_seq=1 ttl=119 time=3.87 ms
- 64 bytes from sof02s31-in-f4.1e100.net (172.217.169.100): icmp_seq=2 ttl=119 time=4.09 ms
- 64 bytes from sof02s31-in-f4.1e100.net (172.217.169.100): icmp_seq=3 ttl=119 time=3.74 ms
- 64 bytes from sof02s31-in-f4.1e100.net (172.217.169.100): icmp_seq=4 ttl=119 time=3.87 ms
- ^C
- --- www.google.com ping statistics ---
- 4 packets transmitted, 4 received, 0% packet loss, time 3005ms
- rtt min/avg/max/mdev = 3.748/3.897/4.091/0.138 ms
- root@a20-olinuxino:~# / ethernet in fconfig -a
- dummy0: flags=130<BROADCAST,NOARP> mtu 1500
- ether be:9f:50:52:91:80 txqueuelen 1000 (Ethernet)
- RX packets 0 bytes 0 (0.0 B)
- RX errors 0 dropped 0 overruns 0 frame 0
- TX packets 0 bytes 0 (0.0 B)
- TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0
- eth0: flags=4163<UP,BROADCAST,RUNNING,MULTICAST> mtu 1500
- inet 192.168.111.163 netmask 255.255.255.0 broadcast 192.168.111.255
- inet6 fe80::c8:bff:fe41:740b prefixlen 64 scopeid 0x20<link>
- ether 02:c8:0b:41:74:0b txqueuelen 1000 (Ethernet)
- RX packets 68 bytes 30033 (30.0 KB)
- RX errors 0 dropped 0 overruns 0 frame 0
- TX packets 137 bytes 14216 (14.2 KB)
- TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0
- device interrupt 64
- lo: flags=73<UP,LOOPBACK,RUNNING> mtu 65536
- inet 127.0.0.1 netmask 255.0.0.0
- inet6 ::1 prefixlen 128 scopeid 0x10<host>
- loop txqueuelen 1000 (Local Loopback)
- RX packets 33 bytes 3167 (3.1 KB)
- RX errors 0 dropped 0 overruns 0 frame 0
- TX packets 33 bytes 3167 (3.1 KB)
- TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0
- root@a20-olinuxino:~# / nano /etv c/ne
- netplan/ network/ networks newt/
- root@a20-olinuxino:~# nano /etc/ne
- netplan/ network/ networks newt/
- root@a20-olinuxino:~# nano /etc/ne
- netplan/ network/ networks newt/
- root@a20-olinuxino:~# nano /etc/network/i
- if-down.d/ if-pre-up.d/ interfaces
- if-post-down.d/ if-up.d/ interfaces.d/
- root@a20-olinuxino:~# nano /etc/network/i
- if-down.d/ if-pre-up.d/ interfaces
- if-post-down.d/ if-up.d/ interfaces.d/
- root@a20-olinuxino:~# nano /etc/network/iinterfq nterfaces
- interfaces interfaces.d/
- root@a20-olinuxino:~# nano /etc/network/interfaces
- [ Reading File ] 3 lines ] GNU nano 2.9.3 /etc/network/interfaces
- ^G Get Help ^O Write Out ^W Where Is ^K Cut Text ^J Justify ^C Cur Pos
- ^X Exit^R Read File ^\ Replace ^U Uncut Text^T To Spell ^_ Go To Line
- # interfaces(5) file used by ifup(8) and ifdown(8)
- # Include files from /etc/network/interfaces.d:
- source-directory /etc/network/interfaces.d
- [ line 1/4 (25%), col 1/51 (1%), char 0/142 (0%) ]
- root@a20-olinuxino:~# nano /etc/network/interfaces.d
- [ "/etc/network/interfaces.d" is a directory ] GNU nano 2.9.3 New Buffer
- ^G Get Help ^O Write Out ^W Where Is ^K Cut Text ^J Justify ^C Cur Pos
- ^X Exit^R Read File ^\ Replace ^U Uncut Text^T To Spell ^_ Go To Line
- [ line 1/1 (100%), col 1/1 (100%), char 0/0 (0%) ]
- root@a20-olinuxino:~# nano /etc/network/interfaces
- [ Reading File ] 3 lines ] GNU nano 2.9.3 /etc/network/interfaces
- ^G Get Help ^O Write Out ^W Where Is ^K Cut Text ^J Justify ^C Cur Pos
- ^X Exit^R Read File ^\ Replace ^U Uncut Text^T To Spell ^_ Go To Line
- # interfaces(5) file used by ifup(8) and ifdown(8)
- # Include files from /etc/network/interfaces.d:
- source-directory /etc/network/interfaces.d
- root@a20-olinuxino:~# nano /etc/network/interfaces.d/eth0 .
- ./ .bash_history .cache/ .local/
- ../ .bashrc .gnupg/ .profile
- root@a20-olinuxino:~# nano /etc/network/interfaces.d/eth0 . 0
- [ Reading File ] 3 lines ] GNU nano 2.9.3 /etc/network/interfaces.d/eth0
- ^G Get Help ^O Write Out ^W Where Is ^K Cut Text ^J Justify ^C Cur Pos
- ^X Exit^R Read File ^\ Replace ^U Uncut Text^T To Spell ^_ Go To Line
- allow-hotplug eth0
- iface eth0 inet dhcp
- root@a20-olinuxino:~#
Add Comment
Please, Sign In to add comment