API tools faq
paste
jobinrjohnson

dmesg omni

jobinrjohnson
May 19th, 2017
117
0
Never
Add comment
Not a member of Pastebin yet? Sign Up, it unlocks many cool features!
text 92.88 KB | None | 0 0
raw download clone embed print report
  1. [ 0.000000] Booting Linux on physical CPU 0
  2. [ 0.000000] Initializing cgroup subsys cpu
  3. [ 0.000000] Linux version 3.4.0-g1c170029f14 (kpliakas@willy) (gcc version 4.9 20150123 (prerelease) (GCC) ) #1 SMP PREEMPT Wed May 17 15:04:02 EEST 2017
  4. [ 0.000000] CPU: ARMv7 Processor [410fc073] revision 3 (ARMv7), cr=10c5387d
  5. [ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache
  6. [ 0.000000] Machine: Qualcomm MSM 8x26 / MSM 8x28 (Flattened Device Tree), model: Qualcomm MSM 8226v2 MTP
  7. [ 0.000000] qcom,ion-heap@28 reserved EBI1 size 314000
  8. [ 0.000000] qcom,mdss_fb_primary reserved EBI1 size 800000
  9. [ 0.000000] Node qcom,mdss_fb_primary memblock_reserve memory 3200000-41a0000
  10. [ 0.000000] Node qcom,msm-mem-hole removed memory 8400000-c400000
  11. [ 0.000000] Node qcom,msm-mem-hole removed memory d200000-f500000
  12. [ 0.000000] Node qcom,msm-mem-hole removed memory fa00000-ff00000
  13. [ 0.000000] memory pool 3 (start 0x3f400000 size c00000) initialized
  14. [ 0.000000] cma: CMA: reserved 16 MiB at 35000000
  15. [ 0.000000] cma: Found secure_region, memory base 0, size 109 MiB, limit 0xffffffff
  16. [ 0.000000] cma: CMA: reserved 112 MiB at 38400000
  17. [ 0.000000] cma: Found adsp_region, memory base 0, size 42 MiB, limit 0x00000000
  18. [ 0.000000] cma: CMA: reserved 44 MiB at 32400000
  19. [ 0.000000] cma: Found qsecom_region, memory base 0, size 13 MiB, limit 0xffffffff
  20. [ 0.000000] cma: CMA: reserved 16 MiB at 37400000
  21. [ 0.000000] Memory policy: ECC disabled, Data cache writealloc
  22. [ 0.000000] IMEM DT static mapping successful
  23. [ 0.000000] On node 0 totalpages: 232448
  24. [ 0.000000] free_area_init_node: node 0, pgdat c12bddc0, node_mem_map c2165000
  25. [ 0.000000] Normal zone: 1728 pages used for memmap
  26. [ 0.000000] Normal zone: 0 pages reserved
  27. [ 0.000000] Normal zone: 192832 pages, LIFO batch:31
  28. [ 0.000000] HighMem zone: 320 pages used for memmap
  29. [ 0.000000] HighMem zone: 37568 pages, LIFO batch:7
  30. [ 0.000000] PERCPU: Embedded 9 pages/cpu @c29a2000 s15808 r8192 d12864 u36864
  31. [ 0.000000] pcpu-alloc: s15808 r8192 d12864 u36864 alloc=9*4096
  32. [ 0.000000] pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3
  33. [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 230400
  34. [ 0.000000] Kernel command line: console=ttyHSL0,115200,n8 user_debug=31 androidboot.selinux=permissive msm_rtb.filter=0x3F ehci-hcd.park=3 dwc3.maximum_speed=high dwc3_msm.prop_chg_detect=Y sched_enable_power_aware=1 androidboot.hardware=eagle buildvariant=userdebug androidboot.emmc=true androidboot.bootloader=s1 oemandroidboot.s1boot=1274-7024_S1_Boot_MSM8x26_LA1.0_1027 androidboot.serialno=ZH8007RRL0 ta_info=1,16,256 startup=0x00008000 warmboot=0x00000000 oemandroidboot.imei=3567460676673700 oemandroidboot.phoneid=0000:3567460676673700,0000:3567460676673800 oemandroidboot.security=0 display_status=off androidboot.baseband=msm
  35. [ 0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes)
  36. [ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
  37. [ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
  38. [ 0.000000] Memory:
  39. [ 0.000000] 132MB
  40. [ 0.000000] 14MB
  41. [ 0.000000] 5MB
  42. [ 0.000000] 757MB
  43. [ 0.000000] = 908MB total
  44. [ 0.000000] Memory: 688824k/688824k available, 253256k reserved, 20480K highmem
  45. [ 0.000000] Virtual kernel memory layout:
  46. vector : 0xffff0000 - 0xffff1000 ( 4 kB)
  47. fixmap : 0xfff00000 - 0xfffe0000 ( 896 kB)
  48. [ 0.000000] vmalloc : 0xf6800000 - 0xff000000 ( 136 MB)
  49. [ 0.000000] lowmem : 0xe0000000 - 0xf6000000 ( 352 MB)
  50. [ 0.000000] lowmem : 0xcff00000 - 0xe0000000 ( 257 MB)
  51. [ 0.000000] vmalloc : 0xcfa00000 - 0xcff00000 ( 5 MB)
  52. [ 0.000000] lowmem : 0xcf500000 - 0xcfa00000 ( 5 MB)
  53. [ 0.000000] vmalloc : 0xcd200000 - 0xcf500000 ( 35 MB)
  54. [ 0.000000] lowmem : 0xcc400000 - 0xcd200000 ( 14 MB)
  55. [ 0.000000] vmalloc : 0xc8400000 - 0xcc400000 ( 64 MB)
  56. [ 0.000000] lowmem : 0xc0000000 - 0xc8400000 ( 132 MB)
  57. [ 0.000000] pkmap : 0xbfe00000 - 0xc0000000 ( 2 MB)
  58. modules : 0xbf000000 - 0xbfe00000 ( 14 MB)
  59. .text : 0xc0008000 - 0xc1052dfc (16684 kB)
  60. .init : 0xc1100000 - 0xc120bdc0 (1072 kB)
  61. .data : 0xc120c000 - 0xc12f459c ( 930 kB)
  62. .bss : 0xc1391834 - 0xc1693d9c (3082 kB)
  63. [ 0.000000] SLUB: Genslabs=11, HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
  64. [ 0.000000] Preemptible hierarchical RCU implementation.
  65. [ 0.000000] RCU dyntick-idle grace-period acceleration is enabled.
  66. [ 0.000000] NR_IRQS:16 nr_irqs:16 16
  67. [ 0.000000] sched_clock: 32 bits at 19MHz, resolution 52ns, wraps every 223696ms
  68. [ 0.000000] Switching to timer-based delay loop
  69. [ 0.000000] Console: colour dummy device 80x30
  70. [ 0.000114] Calibrating delay loop (skipped), value calculated using timer frequency.. 38.40 BogoMIPS (lpj=192000)
  71. [ 0.000121] pid_max: default: 32768 minimum: 301
  72. [ 0.000280] Security Framework initialized
  73. [ 0.000319] SELinux: Initializing.
  74. [ 0.000384] SELinux: Starting in permissive mode
  75. [ 0.000458] Mount-cache hash table entries: 512
  76. [ 0.001510] Initializing cgroup subsys debug
  77. [ 0.001519] Initializing cgroup subsys cpuacct
  78. [ 0.001525] Initializing cgroup subsys freezer
  79. [ 0.001584] CPU: Testing write buffer coherency:
  80. [ 0.001584] ok
  81. [ 0.001787] CPU0: thread -1, cpu 0, socket 0, mpidr 80000000
  82. [ 0.001849] hw perfevents: enabled with ARMv7 Cortex-A7 PMU driver, 5 counters available
  83. [ 0.005084] Setting up static identity map for 0xbb4440 - 0xbb44a4
  84. [ 0.005094] MSM Memory Dump table set up
  85. [ 0.010155] CPU1: thread -1, cpu 1, socket 0, mpidr 80000001
  86. [ 0.014430] CPU2: thread -1, cpu 2, socket 0, mpidr 80000002
  87. [ 0.018690] CPU3: thread -1, cpu 3, socket 0, mpidr 80000003
  88. [ 0.018772] Brought up 4 CPUs
  89. [ 0.018786] SMP: Total of 4 processors activated (153.60 BogoMIPS).
  90. [ 0.032768] VFP support v0.3:
  91. [ 0.032768] implementor 41 architecture 2 part 30 variant 7 rev 3
  92. [ 0.032778] ------------[ cut here ]------------
  93. [ 0.032798] WARNING: at /home/kpliakas/Android/sources/omni7/kernel/sony/msm8226/fs/proc/generic.c:323 __xlate_proc_name+0xa8/0xbc()
  94. [ 0.032803] name 'cpu/vfp_bounce'
  95. [ 0.032810] Modules linked in:
  96. [ 0.032811]
  97. [ 0.032843] [<c010f54c>] (unwind_backtrace+0x0/0x138) from [<c01a6bfc>] (warn_slowpath_fmt+0x58/0x7c)
  98. [ 0.032864] [<c01a6bfc>] (warn_slowpath_fmt+0x58/0x7c) from [<c02c4cd4>] (__xlate_proc_name+0xa8/0xbc)
  99. [ 0.032885] [<c02c4cd4>] (__xlate_proc_name+0xa8/0xbc) from [<c02c4d3c>] (__proc_create+0x54/0xf4)
  100. [ 0.032904] [<c02c4d3c>] (__proc_create+0x54/0xf4) from [<c02c5224>] (proc_create_data+0x60/0x9c)
  101. [ 0.032924] [<c02c5224>] (proc_create_data+0x60/0x9c) from [<c11034ac>] (vfp_init+0x1c0/0x244)
  102. [ 0.032941] [<c11034ac>] (vfp_init+0x1c0/0x244) from [<c010316c>] (do_one_initcall+0xa0/0x19c)
  103. [ 0.032976] ---[ end trace da227214a82491b7 ]---
  104. [ 0.032981] Failed to create procfs node for VFP bounce reporting
  105. [ 0.033426] dummy:
  106. [ 0.041129] NET: Registered protocol family 16
  107. [ 0.044581] DMA: preallocated 256 KiB pool for atomic coherent allocations
  108. [ 0.047264] KPI: Bootloader start count = 30724
  109. [ 0.047271] KPI: Bootloader end count = 88426
  110. [ 0.047277] KPI: Bootloader display count = 1580760015
  111. [ 0.047283] KPI: Bootloader load kernel count = 104138885
  112. [ 0.047290] KPI: Kernel MPM timestamp = 103707
  113. [ 0.047295] KPI: Kernel MPM Clock frequency = 32768
  114. [ 0.047312] socinfo_print: v8, id=158, ver=2.0, raw_id=2048, raw_ver=1, hw_plat=8, hw_plat_ver=0
  115. accessory_chip=0, hw_plat_subtype=0, pmic_model=65540, pmic_die_revision=131074
  116. [ 0.063376] gpiochip_add: registered GPIOs 0 to 116 on device: msmgpio
  117. [ 0.069928] msm_watchdog f9017000.qcom,wdt: MSM Watchdog Initialized
  118. [ 0.100670] 8226_s1: 500 <--> 1275 mV at 0 mV normal idle
  119. [ 0.101198] 8226_s1_corner: 0 <--> 0 mV at 0 mV normal idle
  120. [ 0.101686] 8226_s1_corner_ao: 0 <--> 0 mV at 0 mV normal idle
  121. [ 0.102229] 8226_s1_floor_corner: 0 <--> 0 mV at 0 mV normal idle
  122. [ 0.102751] 8226_s3: 1200 <--> 1300 mV at 1200 mV normal idle
  123. [ 0.103295] 8226_s4: 1800 <--> 2200 mV at 1800 mV normal idle
  124. [ 0.103835] 8226_s5: 1150 mV normal idle
  125. [ 0.104343] 8226_l1: 1225 mV normal idle
  126. [ 0.104878] 8226_l2: 1200 mV normal idle
  127. [ 0.105401] 8226_l3: 750 <--> 1337 mV at 0 mV normal idle
  128. [ 0.105917] 8226_l3_ao: 750 <--> 1337 mV at 0 mV normal idle
  129. [ 0.106402] 8226_l3_so: 750 <--> 1337 mV at 750 mV normal idle
  130. [ 0.106947] 8226_l4: 1200 mV normal idle
  131. [ 0.107470] 8226_l5: 1050 <--> 1200 mV at 1050 mV normal idle
  132. [ 0.108015] 8226_l6: 1800 mV normal idle
  133. [ 0.108555] 8226_l7: 1850 mV normal idle
  134. [ 0.109090] 8226_l8: 1800 mV normal idle
  135. [ 0.109619] 8226_l8_ao: 1800 mV normal idle
  136. [ 0.110118] 8226_l8_so: 1800 mV normal idle
  137. [ 0.110679] 8226_l9: 2050 mV normal idle
  138. [ 0.111215] 8226_l10: 1800 mV normal idle
  139. [ 0.111733] 8226_l12: 1800 mV normal idle
  140. [ 0.112309] 8226_l14: 2750 mV normal idle
  141. [ 0.112822] 8226_l15: 2800 mV normal idle
  142. [ 0.113347] 8226_l16: 3000 <--> 3350 mV at 3300 mV normal idle
  143. [ 0.113855] 8226_l17: 2950 mV normal idle
  144. [ 0.114387] 8226_l18: 2950 mV normal idle
  145. [ 0.114899] 8226_l19: 2850 mV normal idle
  146. [ 0.115426] 8226_l20: 3075 mV normal idle
  147. [ 0.115975] 8226_l21: 1800 <--> 2950 mV at 2950 mV normal idle
  148. [ 0.116491] 8226_l22: 1800 <--> 2950 mV at 2950 mV normal idle
  149. [ 0.117012] 8226_l23: 1800 <--> 2950 mV at 2950 mV normal idle
  150. [ 0.117542] 8226_l24: 1300 <--> 1350 mV at 1300 mV normal idle
  151. [ 0.118075] 8226_l25: 1775 <--> 2125 mV at 1775 mV normal idle
  152. [ 0.118593] 8226_l26: 1225 mV normal idle
  153. [ 0.119132] 8226_l27: 2100 mV normal idle
  154. [ 0.119663] 8226_l28: 1800 <--> 2950 mV at 2950 mV normal idle
  155. [ 0.120208] 8226_lvs1:
  156. [ 0.120846] 8226_s2: 900 <--> 1350 mV at 1150 mV
  157. [ 0.121022] spm_regulator_probe: name=8226_s2, range=MV, voltage=1150000 uV, mode=AUTO, step rate=9600 uV/us
  158. [ 0.127558] mdss_ahb_clk_enable: mdss GDSC is not enabled
  159. [ 0.127567] mdss_ahb_clk_enable: mdss GDSC is not enabled
  160. [ 0.127574] vco_handoff: failed to enable mdss ahb clock. rc=-1
  161. [ 0.127581] mdss_ahb_clk_enable: mdss GDSC is not enabled
  162. [ 0.127593] mdss_ahb_clk_enable: mdss GDSC is not enabled
  163. [ 0.128353] mdss_ahb_clk_enable: mdss GDSC is not enabled
  164. [ 0.146146] AXI: msm_bus_fabric_init_driver(): msm_bus_fabric_init_driver
  165. [ 0.153909] qup_i2c f9927000.i2c: Missing 'qcom,master-id' DT entry
  166. [ 0.155006] qup_i2c f9924000.i2c: Missing 'qcom,master-id' DT entry
  167. [ 0.157265] cpr_efuse_init: efuse_addr = 0xfc4b8000 (len=0x1000)
  168. [ 0.157400] cpr_fuse_is_setting_expected: [row:54] = 0x1c0000000000 @42:6 == 7 ?: yes
  169. [ 0.157419] cpr_parse_speed_bin_fuse: [row: 22]: 0x20a20f02000005a8, speed_bits = 0
  170. [ 0.157442] cpr_fuse_is_setting_expected: [row:22] = 0x20a20f02000005a8 @53:1 == 0 ?: no
  171. [ 0.157458] cpr_fuse_is_setting_expected: [row:22] = 0x20a20f02000005a8 @24:3 == 2 ?: no
  172. [ 0.157484] cpr_pvs_init: pvs voltage: [1050000 1050000 1140000] uV
  173. [ 0.157492] cpr_pvs_init: ceiling voltage: [1050000 1150000 1280000] uV
  174. [ 0.157500] cpr_pvs_init: floor voltage: [1050000 1050000 1100000] uV
  175. [ 0.157861] cpr_fuse_is_setting_expected: [row:138] = 0x8404a319350425 @57:1 == 1 ?: no
  176. [ 0.157884] cpr_init_cpr_efuse: [row:138] = 0x8404a319350425
  177. [ 0.157897] cpr_init_cpr_efuse: disable = 0, local = 1
  178. [ 0.157905] cpr_init_cpr_efuse: Corner[1]: ro_sel = 2, target quot = 793
  179. [ 0.157913] cpr_init_cpr_efuse: Corner[2]: ro_sel = 2, target quot = 848
  180. [ 0.157920] cpr_init_cpr_efuse: Corner[3]: ro_sel = 2, target quot = 1061
  181. [ 0.157967] cpr_parse_pvs_version_fuse: [row: 22]: 0x20a20f02000005a8, pvs_version = 2
  182. [ 0.157993] cpr_get_corner_quot_adjustment: quotient adjustment scaling factor: 0.528
  183. [ 0.158001] cpr_get_corner_quot_adjustment: adjusted quotient[7] = 1061
  184. [ 0.158008] cpr_get_corner_quot_adjustment: adjusted quotient[6] = 1011
  185. [ 0.158015] cpr_get_corner_quot_adjustment: adjusted quotient[5] = 960
  186. [ 0.158077] cpr_init_cpr_parameters: CPR is enabled by default.
  187. [ 0.158098] cpr_config: Timer count: 0x17700 (for 5000 us)
  188. [ 0.158414] apc_corner: 0 <--> 0 mV
  189. [ 0.159835] msm-thermal qcom,msm-thermal.68: probe_freq_mitigation:Failed reading node=/soc/qcom,msm-thermal, key=qcom,freq-mitigation-temp. err=-22. KTM continues
  190. [ 0.159849] msm-thermal qcom,msm-thermal.68: probe_therm_reset:Failed reading node=/soc/qcom,msm-thermal, key=qcom,therm-reset-temp err=-22. KTM continues
  191. [ 0.159862] msm-thermal qcom,msm-thermal.68: probe_psm:Failed reading node=/soc/qcom,msm-thermal, key=qcom,pmic-sw-mode-temp. err=-22. KTM continues
  192. [ 0.160201] msm_thermal:vdd_restriction_reg_init Defer vdd rstr freq init.
  193. [ 0.160218] msm-thermal qcom,msm-thermal.68: probe_ocr:Failed reading node=/soc/qcom,msm-thermal, key=qti,pmic-opt-curr-temp. KTM continues
  194. [ 0.160233] msm-thermal qcom,msm-thermal.68: probe_thermal_efuse_read:Failed reading node=/soc/qcom,msm-thermal, key=qcom,efuse-data. KTM continues
  195. [ 0.160409] msm_thermal:msm_thermal_get_freq_table error reading cpufreq table
  196. [ 0.160809] hw-breakpoint: Debug register access (0xee003e17) caused undefined instruction on CPU 3
  197. [ 0.160816] hw-breakpoint: Debug register access (0xee003e17) caused undefined instruction on CPU 2
  198. [ 0.160823] hw-breakpoint: Debug register access (0xee003e17) caused undefined instruction on CPU 1
  199. [ 0.160830] hw-breakpoint: Debug register access (0xee001eb0) caused undefined instruction on CPU 2
  200. [ 0.160835] hw-breakpoint: Debug register access (0xee001eb0) caused undefined instruction on CPU 1
  201. [ 0.160840] hw-breakpoint: Debug register access (0xee001e90) caused undefined instruction on CPU 2
  202. [ 0.160846] hw-breakpoint: Debug register access (0xee001e90) caused undefined instruction on CPU 1
  203. [ 0.160851] hw-breakpoint: Debug register access (0xee001eb1) caused undefined instruction on CPU 2
  204. [ 0.160856] hw-breakpoint: Debug register access (0xee001eb1) caused undefined instruction on CPU 1
  205. [ 0.160861] hw-breakpoint: Debug register access (0xee001e91) caused undefined instruction on CPU 2
  206. [ 0.160866] hw-breakpoint: Debug register access (0xee001e91) caused undefined instruction on CPU 1
  207. [ 0.160871] hw-breakpoint: Debug register access (0xee001eb2) caused undefined instruction on CPU 2
  208. [ 0.160877] hw-breakpoint: Debug register access (0xee001eb2) caused undefined instruction on CPU 1
  209. [ 0.160882] hw-breakpoint: Debug register access (0xee001e92) caused undefined instruction on CPU 2
  210. [ 0.160887] hw-breakpoint: Debug register access (0xee001e92) caused undefined instruction on CPU 1
  211. [ 0.160892] hw-breakpoint: Debug register access (0xee001eb3) caused undefined instruction on CPU 2
  212. [ 0.160897] hw-breakpoint: Debug register access (0xee001eb3) caused undefined instruction on CPU 1
  213. [ 0.160902] hw-breakpoint: Debug register access (0xee001e93) caused undefined instruction on CPU 2
  214. [ 0.160907] hw-breakpoint: Debug register access (0xee001e93) caused undefined instruction on CPU 1
  215. [ 0.160913] hw-breakpoint: Debug register access (0xee001eb4) caused undefined instruction on CPU 2
  216. [ 0.160918] hw-breakpoint: Debug register access (0xee001eb4) caused undefined instruction on CPU 1
  217. [ 0.160923] hw-breakpoint: Debug register access (0xee001e94) caused undefined instruction on CPU 2
  218. [ 0.160928] hw-breakpoint: Debug register access (0xee001e94) caused undefined instruction on CPU 1
  219. [ 0.160933] hw-breakpoint: Debug register access (0xee001eb5) caused undefined instruction on CPU 2
  220. [ 0.160938] hw-breakpoint: Debug register access (0xee001eb5) caused undefined instruction on CPU 1
  221. [ 0.160943] hw-breakpoint: Debug register access (0xee001e95) caused undefined instruction on CPU 2
  222. [ 0.160948] hw-breakpoint: Debug register access (0xee001e95) caused undefined instruction on CPU 1
  223. [ 0.160954] hw-breakpoint: Debug register access (0xee001ef0) caused undefined instruction on CPU 2
  224. [ 0.160959] hw-breakpoint: Debug register access (0xee001ef0) caused undefined instruction on CPU 1
  225. [ 0.160964] hw-breakpoint: Debug register access (0xee001ed0) caused undefined instruction on CPU 2
  226. [ 0.160969] hw-breakpoint: Debug register access (0xee001ed0) caused undefined instruction on CPU 1
  227. [ 0.160974] hw-breakpoint: Debug register access (0xee001ef1) caused undefined instruction on CPU 2
  228. [ 0.160979] hw-breakpoint: Debug register access (0xee001ef1) caused undefined instruction on CPU 1
  229. [ 0.160985] hw-breakpoint: Debug register access (0xee001ed1) caused undefined instruction on CPU 2
  230. [ 0.160990] hw-breakpoint: Debug register access (0xee001ed1) caused undefined instruction on CPU 1
  231. [ 0.160995] hw-breakpoint: Debug register access (0xee001ef2) caused undefined instruction on CPU 2
  232. [ 0.161000] hw-breakpoint: Debug register access (0xee001ef2) caused undefined instruction on CPU 1
  233. [ 0.161005] hw-breakpoint: Debug register access (0xee001ed2) caused undefined instruction on CPU 2
  234. [ 0.161010] hw-breakpoint: Debug register access (0xee001ed2) caused undefined instruction on CPU 1
  235. [ 0.161015] hw-breakpoint: Debug register access (0xee001ef3) caused undefined instruction on CPU 2
  236. [ 0.161021] hw-breakpoint: Debug register access (0xee001ef3) caused undefined instruction on CPU 1
  237. [ 0.161026] hw-breakpoint: Debug register access (0xee001ed3) caused undefined instruction on CPU 2
  238. [ 0.161031] hw-breakpoint: Debug register access (0xee001ed3) caused undefined instruction on CPU 1
  239. [ 0.161036] hw-breakpoint: Debug register access (0xee004e52) caused undefined instruction on CPU 2
  240. [ 0.161041] hw-breakpoint: Debug register access (0xee004e52) caused undefined instruction on CPU 1
  241. [ 0.161051] hw-breakpoint: Debug register access (0xee001eb0) caused undefined instruction on CPU 3
  242. [ 0.161058] hw-breakpoint: Debug register access (0xee001e90) caused undefined instruction on CPU 3
  243. [ 0.161066] hw-breakpoint: Debug register access (0xee001eb1) caused undefined instruction on CPU 3
  244. [ 0.161073] hw-breakpoint: Debug register access (0xee001e91) caused undefined instruction on CPU 3
  245. [ 0.161081] hw-breakpoint: Debug register access (0xee001eb2) caused undefined instruction on CPU 3
  246. [ 0.161088] hw-breakpoint: Debug register access (0xee001e92) caused undefined instruction on CPU 3
  247. [ 0.161096] hw-breakpoint: Debug register access (0xee001eb3) caused undefined instruction on CPU 3
  248. [ 0.161103] hw-breakpoint: Debug register access (0xee001e93) caused undefined instruction on CPU 3
  249. [ 0.161111] hw-breakpoint: Debug register access (0xee001eb4) caused undefined instruction on CPU 3
  250. [ 0.161119] hw-breakpoint: Debug register access (0xee001e94) caused undefined instruction on CPU 3
  251. [ 0.161126] hw-breakpoint: Debug register access (0xee001eb5) caused undefined instruction on CPU 3
  252. [ 0.161133] hw-breakpoint: Debug register access (0xee001e95) caused undefined instruction on CPU 3
  253. [ 0.161141] hw-breakpoint: Debug register access (0xee001ef0) caused undefined instruction on CPU 3
  254. [ 0.161149] hw-breakpoint: Debug register access (0xee001ed0) caused undefined instruction on CPU 3
  255. [ 0.161156] hw-breakpoint: Debug register access (0xee001ef1) caused undefined instruction on CPU 3
  256. [ 0.161164] hw-breakpoint: Debug register access (0xee001ed1) caused undefined instruction on CPU 3
  257. [ 0.161171] hw-breakpoint: Debug register access (0xee001ef2) caused undefined instruction on CPU 3
  258. [ 0.161179] hw-breakpoint: Debug register access (0xee001ed2) caused undefined instruction on CPU 3
  259. [ 0.161186] hw-breakpoint: Debug register access (0xee001ef3) caused undefined instruction on CPU 3
  260. [ 0.161194] hw-breakpoint: Debug register access (0xee001ed3) caused undefined instruction on CPU 3
  261. [ 0.161202] hw-breakpoint: Debug register access (0xee004e52) caused undefined instruction on CPU 3
  262. [ 0.161213] hw-breakpoint: Debug register access (0xee003e17) caused undefined instruction on CPU 0
  263. [ 0.161221] hw-breakpoint: Debug register access (0xee001eb0) caused undefined instruction on CPU 0
  264. [ 0.161229] hw-breakpoint: Debug register access (0xee001e90) caused undefined instruction on CPU 0
  265. [ 0.161236] hw-breakpoint: Debug register access (0xee001eb1) caused undefined instruction on CPU 0
  266. [ 0.161244] hw-breakpoint: Debug register access (0xee001e91) caused undefined instruction on CPU 0
  267. [ 0.161251] hw-breakpoint: Debug register access (0xee001eb2) caused undefined instruction on CPU 0
  268. [ 0.161259] hw-breakpoint: Debug register access (0xee001e92) caused undefined instruction on CPU 0
  269. [ 0.161266] hw-breakpoint: Debug register access (0xee001eb3) caused undefined instruction on CPU 0
  270. [ 0.161273] hw-breakpoint: Debug register access (0xee001e93) caused undefined instruction on CPU 0
  271. [ 0.161281] hw-breakpoint: Debug register access (0xee001eb4) caused undefined instruction on CPU 0
  272. [ 0.161288] hw-breakpoint: Debug register access (0xee001e94) caused undefined instruction on CPU 0
  273. [ 0.161296] hw-breakpoint: Debug register access (0xee001eb5) caused undefined instruction on CPU 0
  274. [ 0.161303] hw-breakpoint: Debug register access (0xee001e95) caused undefined instruction on CPU 0
  275. [ 0.161311] hw-breakpoint: Debug register access (0xee001ef0) caused undefined instruction on CPU 0
  276. [ 0.161318] hw-breakpoint: Debug register access (0xee001ed0) caused undefined instruction on CPU 0
  277. [ 0.161326] hw-breakpoint: Debug register access (0xee001ef1) caused undefined instruction on CPU 0
  278. [ 0.161333] hw-breakpoint: Debug register access (0xee001ed1) caused undefined instruction on CPU 0
  279. [ 0.161341] hw-breakpoint: Debug register access (0xee001ef2) caused undefined instruction on CPU 0
  280. [ 0.161348] hw-breakpoint: Debug register access (0xee001ed2) caused undefined instruction on CPU 0
  281. [ 0.161355] hw-breakpoint: Debug register access (0xee001ef3) caused undefined instruction on CPU 0
  282. [ 0.161363] hw-breakpoint: Debug register access (0xee001ed3) caused undefined instruction on CPU 0
  283. [ 0.161371] hw-breakpoint: Debug register access (0xee004e52) caused undefined instruction on CPU 0
  284. [ 0.167386] sps:sps is ready.
  285. [ 0.167387] gdsc_venus:
  286. [ 0.167711] gdsc_mdss:
  287. [ 0.168043] gdsc_jpeg:
  288. [ 0.168386] gdsc_vfe:
  289. [ 0.168687] gdsc_oxili_cx:
  290. [ 0.168998] gdsc_usb_hsic:
  291. [ 0.170080] msm_ocmem fdd00000.qcom,ocmem: OCMEM Virtual addr c8600000
  292. [ 0.170204] Physical OCMEM zone layout:
  293. [ 0.170215] zone graphics : 0xfec00000 - 0xfec1ffff ( 128 KB)
  294. [ 0.198187] bio: create slab <bio-0> at 0
  295. [ 0.199395] cma: Assigned CMA region at 0 to 8.qcom,ion-heap device
  296. [ 0.199484] ION-heap mm: Cannot specify alignment for this type of heap
  297. [ 0.199579] cma: Assigned CMA region at 0 to 16.qcom,ion-heap device
  298. [ 0.199664] ION-heap adsp: Cannot specify alignment for this type of heap
  299. [ 0.199757] cma: Assigned CMA region at 0 to 1b.qcom,ion-heap device
  300. [ 0.200294] ION heap system created
  301. [ 0.200508] ION heap mm created at 0x38400000 with size 6d00000
  302. [ 0.200533] ION heap adsp created at 0x32400000 with size 2a00000
  303. [ 0.200555] ION heap qsecom created at 0x37400000 with size d00000
  304. [ 0.200598] ION heap audio created at 0x3f400000 with size 314000
  305. [ 0.200629] ION heap pil_1 created at 0x0dc00000 with size 1900000
  306. [ 0.202663] SCSI subsystem initialized
  307. [ 0.202831] usbcore: registered new interface driver usbfs
  308. [ 0.202918] usbcore: registered new interface driver hub
  309. [ 0.203067] usbcore: registered new device driver usb
  310. [ 0.203494] Linux media interface: v0.10
  311. [ 0.203550] Linux video capture interface: v2.00
  312. [ 0.205442] msm_iommu_v1 fda64000.qcom,iommu: device jpeg_iommu mapped at c84e0000, with 3 ctx banks
  313. [ 0.206493] msm_iommu_v1 fd928000.qcom,iommu: device mdp_iommu mapped at c8560000, with 3 ctx banks
  314. [ 0.207589] msm_iommu_v1 fdc84000.qcom,iommu: device venus_iommu mapped at c8640000, with 3 ctx banks
  315. [ 0.208619] msm_iommu_v1 fdb10000.qcom,iommu: device kgsl_iommu mapped at c8660000, with 3 ctx banks
  316. [ 0.209619] msm_iommu_v1 fda44000.qcom,iommu: device vfe_iommu mapped at c8680000, with 3 ctx banks
  317. [ 0.210965] msm_iommu_ctx_v1 fda6c000.qcom,iommu-ctx: context jpeg_enc0 using bank 0
  318. [ 0.211120] msm_iommu_ctx_v1 fda6d000.qcom,iommu-ctx: context jpeg_enc1 using bank 1
  319. [ 0.211273] msm_iommu_ctx_v1 fda6e000.qcom,iommu-ctx: context jpeg_dec using bank 2
  320. [ 0.211443] msm_iommu_ctx_v1 fd930000.qcom,iommu-ctx: context mdp_0 using bank 0
  321. [ 0.211609] msm_iommu_ctx_v1 fd931000.qcom,iommu-ctx: context mdp_1 using bank 1
  322. [ 0.211762] msm_iommu_ctx_v1 fd932000.qcom,iommu-ctx: context mdp_2 using bank 2
  323. [ 0.211936] msm_iommu_ctx_v1 fdc8c000.qcom,iommu-ctx: context venus_ns using bank 0
  324. [ 0.212105] msm_iommu_ctx_v1 fdc8d000.qcom,iommu-ctx: context venus_cp using bank 1
  325. [ 0.212255] msm_iommu_ctx_v1 fdc8e000.qcom,iommu-ctx: context venus_fw using bank 2
  326. [ 0.212453] msm_iommu_ctx_v1 fdb18000.qcom,iommu-ctx: context gfx3d_user using bank 0
  327. [ 0.212615] msm_iommu_ctx_v1 fdb19000.qcom,iommu-ctx: context gfx3d_priv using bank 1
  328. [ 0.212767] msm_iommu_ctx_v1 fdb1a000.qcom,iommu-ctx: context gfx3d_spare using bank 2
  329. [ 0.212936] msm_iommu_ctx_v1 fda4c000.qcom,iommu-ctx: context vfe0 using bank 0
  330. [ 0.213100] msm_iommu_ctx_v1 fda4d000.qcom,iommu-ctx: context vfe1 using bank 1
  331. [ 0.213250] msm_iommu_ctx_v1 fda4e000.qcom,iommu-ctx: context cpp using bank 2
  332. [ 0.213971] Advanced Linux Sound Architecture Driver Version 1.0.25.
  333. [ 0.214623] Bluetooth: Core ver 2.16
  334. [ 0.214674] NET: Registered protocol family 31
  335. [ 0.214680] Bluetooth: HCI device and connection manager initialized
  336. [ 0.214688] Bluetooth: HCI socket layer initialized
  337. [ 0.214693] Bluetooth: L2CAP socket layer initialized
  338. [ 0.214932] Bluetooth: SCO socket layer initialized
  339. [ 0.215237] cfg80211: Calling CRDA to update world regulatory domain
  340. [ 0.215274] cfg80211: World regulatory domain updated:
  341. [ 0.215281] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
  342. [ 0.215291] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
  343. [ 0.215299] cfg80211: (2457000 KHz - 2482000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
  344. [ 0.215308] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
  345. [ 0.215316] cfg80211: (5170000 KHz - 5250000 KHz @ 80000 KHz), (300 mBi, 2000 mBm)
  346. [ 0.215325] cfg80211: (5250000 KHz - 5330000 KHz @ 80000 KHz), (300 mBi, 2000 mBm)
  347. [ 0.215333] cfg80211: (5490000 KHz - 5710000 KHz @ 80000 KHz), (300 mBi, 2000 mBm)
  348. [ 0.215342] cfg80211: (5735000 KHz - 5835000 KHz @ 80000 KHz), (300 mBi, 2000 mBm)
  349. [ 0.215350] cfg80211: (57240000 KHz - 63720000 KHz @ 2160000 KHz), (N/A, 0 mBm)
  350. [ 0.216977] Switching to clocksource arch_sys_counter
  351. [ 0.258485] NET: Registered protocol family 2
  352. [ 0.258757] IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
  353. [ 0.259598] TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
  354. [ 0.261954] TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
  355. [ 0.263125] TCP: Hash tables configured (established 131072 bind 65536)
  356. [ 0.263131] TCP: reno registered
  357. [ 0.263143] UDP hash table entries: 512 (order: 2, 16384 bytes)
  358. [ 0.263201] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
  359. [ 0.263550] NET: Registered protocol family 1
  360. [ 0.263845] Trying to unpack rootfs image as initramfs...
  361. [ 0.396747] Freeing initrd memory: 1424K
  362. [ 0.401955] clock-a7 f9011050.qcom,clock-a7: Speed bin: 0
  363. [ 0.401965] clock-a7 f9011050.qcom,clock-a7: PVS version: 2
  364. [ 0.404090] gpiochip_find_base: found new base at 992
  365. [ 0.404257] gpiochip_add: registered GPIOs 992 to 1023 on device: smp2p
  366. [ 0.405240] gpiochip_find_base: found new base at 960
  367. [ 0.405388] gpiochip_add: registered GPIOs 960 to 991 on device: smp2p
  368. [ 0.405441] gpiochip_find_base: found new base at 928
  369. [ 0.405592] gpiochip_add: registered GPIOs 928 to 959 on device: smp2p
  370. [ 0.406587] gpiochip_find_base: found new base at 896
  371. [ 0.406732] gpiochip_add: registered GPIOs 896 to 927 on device: smp2p
  372. [ 0.406785] gpiochip_find_base: found new base at 864
  373. [ 0.406938] gpiochip_add: registered GPIOs 864 to 895 on device: slave-kernel
  374. [ 0.407105] msm_thermal:msm_thermal_get_freq_table error reading cpufreq table
  375. [ 0.408039] gpiochip_find_base: found new base at 832
  376. [ 0.408198] gpiochip_add: registered GPIOs 832 to 863 on device: master-kernel
  377. [ 0.408291] gpiochip_find_base: found new base at 800
  378. [ 0.408448] gpiochip_add: registered GPIOs 800 to 831 on device: smp2p
  379. [ 0.409517] gpiochip_find_base: found new base at 768
  380. [ 0.409665] gpiochip_add: registered GPIOs 768 to 799 on device: smp2p
  381. [ 0.409719] gpiochip_find_base: found new base at 736
  382. [ 0.409865] gpiochip_add: registered GPIOs 736 to 767 on device: slave-kernel
  383. [ 0.410988] gpiochip_find_base: found new base at 704
  384. [ 0.411139] gpiochip_add: registered GPIOs 704 to 735 on device: master-kernel
  385. [ 0.411223] gpiochip_find_base: found new base at 672
  386. [ 0.411373] gpiochip_add: registered GPIOs 672 to 703 on device: smp2p
  387. [ 0.412524] gpiochip_find_base: found new base at 640
  388. [ 0.412682] gpiochip_add: registered GPIOs 640 to 671 on device: smp2p
  389. [ 0.412733] gpiochip_find_base: found new base at 608
  390. [ 0.412883] gpiochip_add: registered GPIOs 608 to 639 on device: slave-kernel
  391. [ 0.414074] gpiochip_find_base: found new base at 576
  392. [ 0.414239] gpiochip_add: registered GPIOs 576 to 607 on device: master-kernel
  393. [ 0.414445] gpiochip_find_base: found new base at 544
  394. [ 0.414598] gpiochip_add: registered GPIOs 544 to 575 on device: rdbg
  395. [ 0.415839] gpiochip_find_base: found new base at 512
  396. [ 0.416000] gpiochip_add: registered GPIOs 512 to 543 on device: rdbg
  397. [ 0.416058] gpiochip_find_base: found new base at 480
  398. [ 0.416209] gpiochip_add: registered GPIOs 480 to 511 on device: rdbg
  399. [ 0.417533] gpiochip_find_base: found new base at 448
  400. [ 0.417697] gpiochip_add: registered GPIOs 448 to 479 on device: rdbg
  401. [ 0.419508] pil-q6v5-lpass fe200000.qcom,lpass: using secure boot
  402. [ 0.424897] pil_pronto fb21b000.qcom,pronto: using secure boot
  403. [ 0.427503] pil_venus fdce0000.qcom,venus: using secure boot
  404. [ 0.435283] NET: Registered protocol family 27
  405. [ 0.441121] cci_hw_id_init
  406. [ 0.441596] cci_hw_id_probe: Read HWID from DT
  407. [ 0.448394] cci_project_id=0, cci_hw_id=5, cci_sim_id=1, cci_band_id=0, cci_customer_id=1
  408. [ 0.448395] msm_rpm_log_probe: OK
  409. [ 0.543885] audit: initializing netlink socket (disabled)
  410. [ 0.543918] type=2000 audit(0.530:1): initialized
  411. [ 0.717880] highmem bounce pool size: 64 pages
  412. [ 0.723930] Registering sdcardfs 0.1
  413. [ 0.724522] fuse init (API version 7.18)
  414. [ 0.725009] msgmni has been set to 1428
  415. [ 0.725055] SELinux: Registering netfilter hooks
  416. [ 0.727290] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 246)
  417. [ 0.727297] io scheduler noop registered
  418. [ 0.727311] io scheduler row registered (default)
  419. [ 0.727553] gpiochip_find_base: found new base at 440
  420. [ 0.727646] gpiochip_add: registered GPIOs 440 to 447 on device: pm8226-gpio
  421. [ 0.727937] qcom,qpnp-pin qpnp-pin-7: qpnp_pin_probe: gpio_chip registered between 440-447
  422. [ 0.728085] gpiochip_find_base: found new base at 432
  423. [ 0.728163] gpiochip_add: registered GPIOs 432 to 439 on device: pm8226-mpp
  424. [ 0.728643] qcom,qpnp-pin qpnp-pin-8: qpnp_pin_probe: gpio_chip registered between 432-439
  425. [ 0.728882] mdss_mdp_probe: MDP HW Base phy_Address=0xfd900000 virt=0xc86c0000
  426. [ 0.728900] mdss_mdp_probe: MDSS VBIF HW Base phy_Address=0xfd924000 virt=0xc854e000
  427. [ 0.729078] mdss_mdp_parse_dt_handler: Error from prop qcom,mdss-ib-factor-overlap : u32 array read
  428. [ 0.729083] mdss_mdp_parse_dt_fudge_factors: err reading qcom,mdss-ib-factor-overlap
  429. [ 0.729098] mdss_mdp_parse_dt_prop_len: Error from prop qcom,mdss-ad-off : spec error in device tree
  430. [ 0.729119] mdss_mdp_parse_bootarg: mdss_mdp_parse_bootarg:1526:cmdline panel not set disp_idx=[00000000]
  431. [ 0.730723] mdss_dsi_ctrl_probe: DSI Ctrl name = MDSS DSI CTRL->0
  432. [ 0.730767] mdss_dsi_ctrl_probe:1318:dsi specific cfg not present
  433. [ 0.730778] mdss_dsi_find_panel_of_node: LCD_ID = 1
  434. [ 0.730799] mdss_dsi_panel_init: Panel Name = truly QHD video mode dsi panel,speed up, 0423-V2-Gamma ,0318 power saving
  435. [ 0.731124] mdss_dsi_parse_roi_alignment: Panel roi alignment not found
  436. [ 0.731125] mdss_dsi_parse_dcs_cmds: failed, key=qcom,mdss-dsi-panel-status-command
  437. [ 0.731147] mdss_dsi_parse_panel_features:860 Partial update disabled
  438. [ 0.731163] mdss_dsi_parse_panel_features: ulps feature disabled
  439. [ 0.731172] mdss_dsi_parse_panel_features: dynamic switch feature enabled: 0
  440. [ 0.731436] mdss_dsi_panel_init: Continuous splash disabled
  441. [ 0.731437] dsi_panel_device_register:1535, Disp_en gpio not specified
  442. [ 0.731522] mdss_dsi_retrieve_ctrl_resources: ctrl_base=c855c800 ctrl_size=1f8 phy_base=c855eb00 phy_size=2b0
  443. [ 0.731534] dsi_panel_device_register: Using default BTA for ESD check
  444. [ 0.732342] mdss_register_panel: adding framebuffer device fd922800.qcom,mdss_dsi
  445. [ 0.733115] mdss_dsi_status_init: DSI status check interval:5000
  446. [ 0.733869] mdss_register_panel: adding framebuffer device qcom,mdss_wb_panel.23
  447. [ 0.734903] mdss_fb_parse_dt: split framebuffer left=0 right=0
  448. [ 0.734910] mdss_fb_alloc_fbmem_iommu: fbmem is not reserved for qcom,mdss_fb_primary.153
  449. [ 0.734916] mdss_fb_alloc_fbmem_iommu: mdss_fb_alloc_fbmem_iommu frame buffer reserve_size=0x800000
  450. [ 0.739421] mdss_fb_register: FrameBuffer[0] 540x960 registered successfully!
  451. [ 0.739460] mdss_mdp_overlay_init: mdss_mdp_overlay_init: unable to add event timer
  452. [ 0.739541] Registered led device: lcd-backlight
  453. [ 0.743060] mdss_hw_init: MDP Rev=10010001
  454. [ 0.743736] mdss_fb_parse_dt: split framebuffer left=0 right=0
  455. [ 0.743742] mdss_fb_alloc_fbmem_iommu: fbmem is not reserved for qcom,mdss_fb_wfd.154
  456. [ 0.743747] mdss_fb_alloc_fbmem_iommu: qcom,memory-reservation-size error for qcom,mdss_fb_wfd.154
  457. [ 0.743960] mdss_fb_register: FrameBuffer[1] 1280x720 registered successfully!
  458. [ 0.744161] mdss_dsi_on+: ctrl=f1ed4810 ndx=0
  459. [ 0.744224] mdss_mdp_overlay_init: mdss_mdp_overlay_init: unable to add event timer
  460. [ 0.769537] lp11_delay
  461. [ 0.769538] mdss_dsi_panel_reset: enable = 1
  462. [ 0.769584] mdss_dsi_panel_on+: ctrl=f1ed4810 ndx=0
  463. [ 0.777900] msm_serial_hsl_probe: detected port #0 (ttyHSL0)
  464. [ 0.778042] f991f000.serial: ttyHSL0 at MMIO 0xf991f000 (irq = 141) is a MSM
  465. [ 0.779222] msm_hsl_console_setup: console setup on port #0
  466. [ 3.129084] console [ttyHSL0] enabled
  467. [ 3.131889] msm_serial_hsl_init: driver initialized
  468. [ 3.139796] diagchar initialized now
  469. [ 3.139797] kgsl bus ib [0] = 1600000000
  470. [ 3.143629] kgsl bus ib [1] = 3200000000
  471. [ 3.146232] kgsl bus ib [2] = 4256000000
  472. [ 3.148867] kgsl bus index is 2 for pwrlevel 0
  473. [ 3.151961] kgsl bus index is 1 for pwrlevel 1
  474. [ 3.155085] kgsl bus index is 0 for pwrlevel 2
  475. [ 3.158633] kgsl kgsl-3d0: |kgsl_iommu_init| MMU type set for device is IOMMU
  476. [ 3.171729] brd: module loaded
  477. [ 3.175490] loop: module loaded
  478. [ 3.176281] Loading pn547 driver
  479. [ 3.178298] pn547_parse_dt: irq : 21, ven : 20, firm : 22, pvdd_en : -22
  480. [ 3.183591] pn547_probe: Couldn't get D1 (-2)
  481. [ 3.186611] pn547_probe : IRQ num 336
  482. [ 3.189049] pn547_probe : requesting IRQ 336
  483. [ 3.203369] pn547_probe : i2c addr=0x28
  484. [ 3.204857] pn547_probe : success
  485. [ 3.207443] QSEECOM: qseecom_probe: support_bus_scaling=0x1
  486. [ 3.211108] QSEECOM: qseecom_probe: disk-encrypt-pipe-pair=0x2
  487. [ 3.215620] QSEECOM: qseecom_probe: Device does not support PFE
  488. [ 3.220249] QSEECOM: qseecom_probe: hlos-ce-hw-instance=0x0
  489. [ 3.224475] QSEECOM: qseecom_probe: qsee-ce-hw-instance=0x0
  490. [ 3.228780] QSEECOM: qseecom_probe: qseecom.appsbl_qseecom_support = 0x0
  491. [ 3.234562] QSEECOM: qseecom_probe: secure app region addr=0xd980000 size=0x256000
  492. [ 3.234563] i2c-core: driver [tabla-i2c-core] using legacy suspend method
  493. [ 3.245854] i2c-core: driver [tabla-i2c-core] using legacy resume method
  494. [ 3.251344] i2c-core: driver [wcd9xxx-i2c-core] using legacy suspend method
  495. [ 3.256852] i2c-core: driver [wcd9xxx-i2c-core] using legacy resume method
  496. [ 3.262551] gpio_request: gpio-20 (nfc_reset_gpio) status -16
  497. [ 3.262558] nfc-nci 2-000e: qca199x_probe: unable to request gpio [20]
  498. [ 3.267654] nfc-nci: probe of 2-000e failed with error -16
  499. [ 3.272521] sps: BAM device 0xf9904000 is not registered yet.
  500. [ 3.278577] sps:BAM 0xf9904000 is registered.
  501. [ 3.278577] sps:BAM 0xf9904000 (va:0xc85f0000) enabled: ver:0x15, number of pipes:24
  502. [ 3.289318] tun: Universal TUN/TAP device driver, 1.6
  503. [ 3.292019] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
  504. [ 3.296945] rmnet_init: BAM devices[9]
  505. [ 3.305790] PPP generic driver version 2.4.2
  506. [ 3.307850] PPP BSD Compression module registered
  507. [ 3.311096] PPP Deflate Compression module registered
  508. [ 3.315408] PPP MPPE Compression module registered
  509. [ 3.318331] NET: Registered protocol family 24
  510. [ 3.321728] wcnss_wlan probed in built-in mode
  511. [ 3.325344] usbcore: registered new interface driver asix
  512. [ 3.328717] usbcore: registered new interface driver cdc_ether
  513. [ 3.333179] usbcore: registered new interface driver net1080
  514. [ 3.337544] usbcore: registered new interface driver cdc_subset
  515. [ 3.342118] usbcore: registered new interface driver zaurus
  516. [ 3.346457] usbcore: registered new interface driver cdc_ncm
  517. [ 3.351923] msm_otg f9a55000.usb: msm_otg probe
  518. [ 3.355662] msm_otg f9a55000.usb: OTG regs = c857a000
  519. [ 3.360013] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
  520. [ 3.364419] Unable to get vbus_otg
  521. [ 3.366278] msm_hsusb_host msm_hsusb_host: unable to register with transceiver
  522. [ 3.372221] platform msm_hsusb_host: Driver msm_hsusb_host requests probe deferral
  523. [ 3.379360] usbcore: registered new interface driver cdc_acm
  524. [ 3.382768] cdc_acm: USB Abstract Control Model driver for USB modems and ISDN adapters
  525. [ 3.389538] usbcore: registered new interface driver ccid_bridge
  526. [ 3.394254] ccid_bridge_init: success
  527. [ 3.396483] Initializing USB Mass Storage driver...
  528. [ 3.400124] usbcore: registered new interface driver usb-storage
  529. [ 3.404729] USB Mass Storage support registered.
  530. [ 3.408156] usbcore: registered new interface driver usbserial
  531. [ 3.412542] usbserial: USB Serial Driver core
  532. [ 3.415618] usbcore: registered new interface driver qc_csvt
  533. [ 3.419975] USB Serial support registered for qc_csvt
  534. [ 3.423691] usbcore: registered new interface driver usb_ehset_test
  535. [ 3.429504] msm_hsusb msm_hsusb: [ci13xxx_start] hw_ep_max = 32
  536. [ 3.433787] mbim_init: initialize 1 instances
  537. [ 3.436312] mbim_init: Initialized 1 ports
  538. [ 3.440542] rndis_qc_init: initialize rndis QC instance
  539. [ 3.443793] android_usb gadget: Mass Storage Function, version: 2009/09/11
  540. [ 3.449049] android_usb gadget: Number of LUNs=2
  541. [ 3.452274] lun0: LUN: removable file: (no medium)
  542. [ 3.455830] lun1: LUN: removable file: (no medium)
  543. [ 3.459727] android_usb gadget: android_usb ready
  544. [ 3.463460] mousedev: PS/2 mouse device common for all mice
  545. [ 3.467309] usbcore: registered new interface driver xpad
  546. [ 3.471183] cyttsp4_core_init: Cypress TTSP v4 core driver (Built 20130612) rc=0
  547. [ 3.477245] cyttsp4_i2c_adapter 5-0024: cyttsp4_i2c_probe: Starting cyttsp4_i2c_adapter probe...
  548. [ 3.487583] cyttsp4_core main_ttsp_core.cyttsp4_i2c_adapter: cyttsp4_core_probe: startup
  549. [ 3.493360] cyttsp4_core main_ttsp_core.cyttsp4_i2c_adapter: cyttsp4_core_probe: Init HW
  550. [ 3.500136] cyttsp4_core main_ttsp_core.cyttsp4_i2c_adapter: cyttsp4_init: INIT CYTTSP RST gpio=16 and IRQ gpio=17 r=0
  551. [ 3.509665] [TP] retry = 3, reset_count = 0
  552. [ 3.617052] cyttsp4_core main_ttsp_core.cyttsp4_i2c_adapter: cyttsp4_xres: RESET CYTTSP gpio=16 r=0
  553. [ 4.094064] cyttsp4_core main_ttsp_core.cyttsp4_i2c_adapter: cyttsp4_si_get_test_data: SCANNING is ENABLED codel=1E
  554. [ 4.143821] [TP] Sillicon ID = 0x3d, Panel ID = 0x1
  555. [ 4.146351] lpwc=[18~5], lpwc_self=[43~14], raw=[131~-324],baseline=[15~-15]
  556. [ 4.152101] [TP][cyttsp4_ping_ic] start ...
  557. [ 4.172554] [TP] Ping pass!
  558. [ 4.197179] cyttsp4_i2c_adapter 5-0024: cyttsp4_i2c_probe: Successful probe cyttsp4_i2c_adapter
  559. [ 4.203570] cyttsp4_i2c_init: Cypress TTSP I2C Touchscreen Driver (Built 20130612) rc=0
  560. [ 4.210437] input: cyttsp4_mt as /devices/f9927000.i2c/i2c-5/5-0024/main_ttsp_core.cyttsp4_i2c_adapter/cyttsp4_mt.main_ttsp_core/input/input2
  561. [ 4.223672] cyttsp4_core main_ttsp_core.cyttsp4_i2c_adapter: cyttsp4_wakeup: WAKEUP CYTTSP gpio=17 r=0
  562. [ 4.230773] cyttsp4_mt_init: Cypress TTSP MT v4 multi-touch (Built 20130612), rc=0
  563. [ 4.236879] cyttsp4_device_access_init: Registering device access device for core_id: main_ttsp_core
  564. [ 4.244841] cyttsp4_device_access_init: Cypress TTSP Device Access (Built 20130612) rc=0
  565. [ 4.251482] cyttsp4_loader_init: Registering loader device for core_id: main_ttsp_core
  566. [ 4.258192] [TP] cfg_ver_new_h = 0x6, cfg_ver_new_l = 0x0, cfg_ver_old_h = 0x6, cfg_ver_old_l = 0x0
  567. [ 4.265819] [TP] Do not need to upgrade FW.
  568. [ 4.268686] cyttsp4_loader cyttsp4_loader.main_ttsp_core: cyttsp4_loader_probe: Successful probe cyttsp4_loader
  569. [ 4.277555] cyttsp4_loader_init: Cypress TTSP FW loader (Built 20130612) rc=0
  570. [ 4.284016] GPIO Input Driver: Start gpio inputs for uim-det-gpio-keys in interrupt mode
  571. [ 4.290187] input: uim-det-gpio-keys as /devices/virtual/input/input3
  572. [ 4.295333] stk3x1x_probe: power on start
  573. [ 4.298204] stk3x1x_probe: power on end
  574. [ 4.303332] stk3x1x_probe: driver version = 3.5.1.1
  575. [ 4.305861] stk3x1x_probe: stk3x1x_pfdata_QCT
  576. [ 4.308925] stk3x1x_probe: set stk3x1x_pfdata_QCT to plat_data
  577. [ 4.313559] input: lightsensor-level as /devices/virtual/input/input0
  578. [ 4.318767] input: proximity as /devices/virtual/input/input1
  579. [ 4.323358] stk3x1x_setup_irq: int pin #=65, irq=629
  580. [ 4.347385] stk3x1x_setup_irq: [CCI]gpio_tlmm_config => int_pin(65), GPIO_CFG_INPUT, GPIO_CFG_PULL_UP, GPIO_CFG_8MA
  581. [ 4.347386] stk3x1x_check_pid: PID=0x13, RID=0xc2
  582. [ 4.360116] stk3x1x_probe: probe successfully
  583. [ 4.360117] mmc3416x add driver
  584. [ 4.364066] mag_sensor_power_on: mag power on start
  585. [ 4.367924] mag_sensor_power_on: mag power on end
  586. [ 4.373978] [CCI]mmc3416x_probe: mmc3416x_probe start ---
  587. [ 4.377197] qup_i2c f9924000.i2c: QUP: I2C status flags :0xc1300c8, irq:128
  588. [ 4.382685] qup_i2c f9924000.i2c: I2C slave addr:0x30 not connected
  589. [ 4.397720] qup_i2c f9924000.i2c: QUP: I2C status flags :0x81343c8, irq:128
  590. [ 4.402346] qup_i2c f9924000.i2c: I2C slave addr:0x30 not connected
  591. [ 4.417381] qup_i2c f9924000.i2c: QUP: I2C status flags :0x81343c8, irq:128
  592. [ 4.422026] qup_i2c f9924000.i2c: I2C slave addr:0x30 not connected
  593. [ 4.427505] stk_tune_zero_get_ps_data: ps_adc #0=496
  594. [ 4.436964] mmc3xxx_i2c_tx_data: retry over 3
  595. [ 4.480561] stk_tune_zero_get_ps_data: ps_adc #1=496
  596. [ 4.527114] qup_i2c f9924000.i2c: QUP: I2C status flags :0x81343c8, irq:128
  597. [ 4.531739] qup_i2c f9924000.i2c: I2C slave addr:0x30 not connected
  598. [ 4.540483] stk_tune_zero_get_ps_data: ps_adc #2=498
  599. [ 4.549172] qup_i2c f9924000.i2c: QUP: I2C status flags :0x81343c8, irq:128
  600. [ 4.553799] qup_i2c f9924000.i2c: I2C slave addr:0x30 not connected
  601. [ 4.568833] qup_i2c f9924000.i2c: QUP: I2C status flags :0x81343c8, irq:128
  602. [ 4.573458] qup_i2c f9924000.i2c: I2C slave addr:0x30 not connected
  603. [ 4.588431] mmc3xxx_i2c_tx_data: retry over 3
  604. [ 4.600495] stk_tune_zero_get_ps_data: ps_adc #3=500
  605. [ 4.607108] qup_i2c f9924000.i2c: QUP: I2C status flags :0x81343c8, irq:128
  606. [ 4.611735] qup_i2c f9924000.i2c: I2C slave addr:0x30 not connected
  607. [ 4.626747] qup_i2c f9924000.i2c: QUP: I2C status flags :0x81343c8, irq:128
  608. [ 4.631375] qup_i2c f9924000.i2c: I2C slave addr:0x30 not connected
  609. [ 4.646384] qup_i2c f9924000.i2c: QUP: I2C status flags :0x81343c8, irq:128
  610. [ 4.651014] qup_i2c f9924000.i2c: I2C slave addr:0x30 not connected
  611. [ 4.660482] stk_tune_zero_get_ps_data: ps_adc #4=499
  612. [ 4.663324] stk_ps_tune_zero_final: [CCI]set HT=627,LT=572 according to ps_stat_data
  613. [ 4.673570] mmc3xxx_i2c_tx_data: retry over 3
  614. [ 4.757113] qup_i2c f9924000.i2c: QUP: I2C status flags :0x81343c8, irq:128
  615. [ 4.761740] qup_i2c f9924000.i2c: I2C slave addr:0x30 not connected
  616. [ 4.776738] qup_i2c f9924000.i2c: QUP: I2C status flags :0x81343c8, irq:128
  617. [ 4.781367] qup_i2c f9924000.i2c: I2C slave addr:0x30 not connected
  618. [ 4.796365] qup_i2c f9924000.i2c: QUP: I2C status flags :0x81343c8, irq:128
  619. [ 4.800994] qup_i2c f9924000.i2c: I2C slave addr:0x30 not connected
  620. [ 4.815933] mmc3xxx_i2c_tx_data: retry over 3
  621. [ 4.907106] qup_i2c f9924000.i2c: QUP: I2C status flags :0x81343c8, irq:128
  622. [ 4.911733] qup_i2c f9924000.i2c: I2C slave addr:0x30 not connected
  623. [ 4.926732] qup_i2c f9924000.i2c: QUP: I2C status flags :0x81343c8, irq:128
  624. [ 4.931360] qup_i2c f9924000.i2c: I2C slave addr:0x30 not connected
  625. [ 4.946357] qup_i2c f9924000.i2c: QUP: I2C status flags :0x81343c8, irq:128
  626. [ 4.951012] qup_i2c f9924000.i2c: I2C slave addr:0x30 not connected
  627. [ 4.965928] mmc3xxx_i2c_tx_data: retry over 3
  628. [ 4.987119] qup_i2c f9924000.i2c: QUP: I2C status flags :0x81343c8, irq:128
  629. [ 4.991747] qup_i2c f9924000.i2c: I2C slave addr:0x30 not connected
  630. [ 5.006747] qup_i2c f9924000.i2c: QUP: I2C status flags :0x81343c8, irq:128
  631. [ 5.011388] qup_i2c f9924000.i2c: I2C slave addr:0x30 not connected
  632. [ 5.026376] qup_i2c f9924000.i2c: QUP: I2C status flags :0xc1343c8, irq:128
  633. [ 5.031004] qup_i2c f9924000.i2c: I2C slave addr:0x30 not connected
  634. [ 5.045946] mmc3xxx_i2c_tx_data: retry over 3
  635. [ 5.067107] qup_i2c f9924000.i2c: QUP: I2C status flags :0x81343c8, irq:128
  636. [ 5.071733] qup_i2c f9924000.i2c: I2C slave addr:0x30 not connected
  637. [ 5.086734] qup_i2c f9924000.i2c: QUP: I2C status flags :0x81343c8, irq:128
  638. [ 5.091360] gpio_keys_scan_keys: key 5-7, 0 (60) changed to 1
  639. [ 5.095770] gpio_event_input_timer_func - uim1 call queue_work()
  640. [ 5.100469] gpio_keys_scan_keys: key 5-7, 1 (56) changed to 1
  641. [ 5.104885] gpio_event_input_timer_func - uim2 call queue_work()
  642. [ 5.109604] qup_i2c f9924000.i2c: I2C slave addr:0x30 not connected
  643. [ 5.124589] qup_i2c f9924000.i2c: QUP: I2C status flags :0x81343c8, irq:128
  644. [ 5.129218] qup_i2c f9924000.i2c: I2C slave addr:0x30 not connected
  645. [ 5.144158] mmc3xxx_i2c_tx_data: retry over 3
  646. [ 5.157104] qup_i2c f9924000.i2c: QUP: I2C status flags :0x81343c8, irq:128
  647. [ 5.161730] qup_i2c f9924000.i2c: I2C slave addr:0x30 not connected
  648. [ 5.176730] qup_i2c f9924000.i2c: QUP: I2C status flags :0x81343c8, irq:128
  649. [ 5.181359] qup_i2c f9924000.i2c: I2C slave addr:0x30 not connected
  650. [ 5.196355] qup_i2c f9924000.i2c: QUP: I2C status flags :0x81343c8, irq:128
  651. [ 5.201009] qup_i2c f9924000.i2c: I2C slave addr:0x30 not connected
  652. [ 5.215925] mmc3xxx_i2c_tx_data: retry over 3
  653. [ 5.237104] qup_i2c f9924000.i2c: QUP: I2C status flags :0x81343c8, irq:128
  654. [ 5.241732] qup_i2c f9924000.i2c: I2C slave addr:0x30 not connected
  655. [ 5.256732] qup_i2c f9924000.i2c: QUP: I2C status flags :0x81343c8, irq:128
  656. [ 5.261361] qup_i2c f9924000.i2c: I2C slave addr:0x30 not connected
  657. [ 5.276360] qup_i2c f9924000.i2c: QUP: I2C status flags :0x81343c8, irq:128
  658. [ 5.281012] qup_i2c f9924000.i2c: I2C slave addr:0x30 not connected
  659. [ 5.295930] mmc3xxx_i2c_rx_data: retry over 3
  660. [ 5.297955] [MEMSIC] Failed to read Chip ID[0]
  661. [ 5.301123] qup_i2c f9924000.i2c: QUP: I2C status flags :0x81343c8, irq:128
  662. [ 5.306721] qup_i2c f9924000.i2c: I2C slave addr:0x30 not connected
  663. [ 5.321744] qup_i2c f9924000.i2c: QUP: I2C status flags :0x81343c8, irq:128
  664. [ 5.326371] qup_i2c f9924000.i2c: I2C slave addr:0x30 not connected
  665. [ 5.341392] qup_i2c f9924000.i2c: QUP: I2C status flags :0x81343c8, irq:128
  666. [ 5.346018] qup_i2c f9924000.i2c: I2C slave addr:0x30 not connected
  667. [ 5.360978] mmc3xxx_i2c_rx_data: retry over 3
  668. [ 5.362984] [MEMSIC] Failed to read Chip ID[1]
  669. [ 5.366109] ecompass driver: init
  670. [ 5.368293] input: ecompass_data as /devices/virtual/input/input4
  671. [ 5.372953] [CCI]mmc3416x_probe: mmc3416x_probe end ---
  672. [ 5.376818] [CCI]kionix_accel_init: compass pid=0x00
  673. [ 5.380760] qcom,qpnp-rtc qpnp-rtc-13: rtc core: registered qpnp_rtc as rtc0
  674. [ 5.386333] i2c /dev entries driver
  675. [ 5.389691] msm_vidc: 1: Failed to read qcom,load-freq-tbl from device tree
  676. [ 5.389695] msm_vidc: 1: no elements in frequency table
  677. [ 5.389700] msm_vidc: 1: Failed to read qcom,reg-presets from device tree
  678. [ 5.389769] msm_vidc: 1: Failed to read qcom,buffer-type-tz-usage-table from device tree
  679. [ 5.389780] msm_vidc: 1: Q6 hfi device probe called
  680. [ 5.390009] msm_vidc: 1: debugfs_create_file: fail
  681. [ 5.395989] Registered led device: torch-light
  682. [ 5.396598] msm_eeprom_platform_probe MM data miss:1012
  683. [ 5.399746] msm_eeprom_parse_memory_map: pageen not needed
  684. [ 5.403653] msm_eeprom_parse_memory_map: pageen not needed
  685. [ 5.407845] msm_eeprom_parse_memory_map: pageen not needed
  686. [ 5.411987] msm_eeprom_parse_memory_map: pageen not needed
  687. [ 5.416153] msm_eeprom_parse_memory_map: pageen not needed
  688. [ 5.420342] msm_eeprom_parse_memory_map: pageen not needed
  689. [ 5.424488] msm_eeprom_parse_memory_map: pageen not needed
  690. [ 5.428675] msm_eeprom_parse_memory_map: pageen not needed
  691. [ 5.523442] gc0339_match_id: sub camera sensor name = SKUAA_ST_gc0339
  692. [ 5.546215] __msm_jpeg_init:951] Jpeg Device id 0
  693. [ 5.546216] lirc_dev: IR Remote Control driver registered, major 234
  694. [ 5.553724] IR NEC protocol handler initialized
  695. [ 5.556903] IR RC5(x) protocol handler initialized
  696. [ 5.560396] IR RC6 protocol handler initialized
  697. [ 5.563588] IR JVC protocol handler initialized
  698. [ 5.566799] IR Sony protocol handler initialized
  699. [ 5.570118] IR RC5 (streamzap) protocol handler initialized
  700. [ 5.574351] IR SANYO protocol handler initialized
  701. [ 5.577757] IR MCE Keyboard/mouse protocol handler initialized
  702. [ 5.582250] IR LIRC bridge handler initialized
  703. [ 5.585449] usbcore: registered new interface driver uvcvideo
  704. [ 5.589825] USB Video Class driver (1.1.1)
  705. [ 5.593146] BMS: qpnp_bms_init: QPNP BMS INIT
  706. [ 5.595693] spmi qpnp-bms-3: Driver qcom,qpnp-bms requests probe deferral
  707. [ 5.601253] spmi qpnp-charger-2: Driver qcom,qpnp-charger requests probe deferral
  708. [ 5.649891] device-mapper: ioctl: 4.22.0-ioctl (2011-10-19) initialised: dm-devel@redhat.com
  709. [ 5.656596] cpuidle: using governor ladder
  710. [ 5.658786] cpuidle: using governor menu
  711. [ 5.661391] sdhci: Secure Digital Host Controller Interface driver
  712. [ 5.666220] sdhci: Copyright(c) Pierre Ossman
  713. [ 5.669776] sdhci-pltfm: SDHCI platform and OF driver helper
  714. [ 5.677427] mmc0: no vmmc regulator found
  715. [ 5.680173] Registered led device: mmc0::
  716. [ 5.682412] mmc0: SDHCI controller on msm_sdcc.1 [msm_sdcc.1] using ADMA
  717. [ 5.691139] mmc1: no vmmc regulator found
  718. [ 5.693883] Registered led device: mmc1::
  719. [ 5.695043] mmc1: SDHCI controller on msm_sdcc.2 [msm_sdcc.2] using ADMA
  720. [ 5.699910] Registered led device: led:rgb_blue
  721. [ 5.700088] Registered led device: led:rgb_green
  722. [ 5.700277] Registered led device: led:rgb_red
  723. [ 5.700993] Registered led device: wled:backlight
  724. [ 5.701149] qcom,leds-qpnp leds-qpnp-22: Flash wa regulator get failed(-517)
  725. [ 5.705863] qcom,leds-qpnp leds-qpnp-22: Regulator get failed(-517)
  726. [ 5.710825] qcom,leds-qpnp leds-qpnp-22: Unable to read flash config data
  727. [ 5.716274] spmi leds-qpnp-22: Driver qcom,leds-qpnp requests probe deferral
  728. [ 5.726864] QCE50: __qce_get_device_tree_data: bam_pipe_pair=0x1
  729. [ 5.730584] QCE50: __qce_get_device_tree_data: ce-device =0x0
  730. [ 5.736972] QCE50: __qce_get_device_tree_data: ce_phy_reg_base=0xfd400000
  731. [ 5.736973] QCE50: __qce_get_device_tree_data: ce_virt_reg_base=0xc8780000
  732. [ 5.749194] QCE50: __qce_get_device_tree_data: ce_bam_phy_reg_base=0xfd404000
  733. [ 5.749194] QCE50: __qce_get_device_tree_data: CRYPTO BAM IRQ = 239.
  734. [ 5.763607] qce fd400000.qcom,qcedev: Qualcomm Crypto 5.0.2 device found @0xfd400000
  735. [ 5.771055] qce fd400000.qcom,qcedev: CE device = 0x0
  736. , IO base, CE = 0xc8780000
  737. , Consumer (IN) PIPE 2, Producer (OUT) PIPE 3
  738. IO base BAM = 0x0
  739. BAM IRQ 239
  740. Engines Availability = 0x1011053
  741. [ 5.788619] sps:BAM 0xfd404000 is registered.
  742. [ 5.788620] sps:BAM 0xfd404000 (va:0xc8630000) enabled: ver:0x22, number of pipes:16
  743. [ 5.799434] QCE50: qce_sps_init: Qualcomm MSM CE-BAM at 0x00000000fd404000 irq 239
  744. [ 5.807064] qcedev: FIPS140-2 Known Answer Tests : Skipped
  745. [ 5.812758] QCE50: __qce_get_device_tree_data: bam_pipe_pair=0x2
  746. [ 5.816468] QCE50: __qce_get_device_tree_data: ce-device =0x0
  747. [ 5.820868] QCE50: __qce_get_device_tree_data: ce_phy_reg_base=0xfd400000
  748. [ 5.820868] QCE50: __qce_get_device_tree_data: ce_virt_reg_base=0xc87c0000
  749. [ 5.832084] QCE50: __qce_get_device_tree_data: ce_bam_phy_reg_base=0xfd404000
  750. [ 5.832085] QCE50: __qce_get_device_tree_data: CRYPTO BAM IRQ = 239.
  751. [ 5.843336] QCE50: __qce_init_clk: Unable to get CE core src clk, set to NULL
  752. [ 5.848914] QCE50: __qce_init_clk: Unable to get CE core clk
  753. [ 5.853221] QCE50: __qce_init_clk: Unable to init CE clks, rc = -2
  754. [ 5.858157] qcrypto: probe of fd400000.qcom,qcrypto failed with error -2
  755. [ 5.864231] usbcore: registered new interface driver usbhid
  756. [ 5.867765] usbhid: USB HID core driver
  757. [ 5.870316] mag_sensor_power_on: mag power on start
  758. [ 5.874123] mag_sensor_power_on: mag power on end
  759. [ 5.880214] [CCI]yas_probe: yas533_probe start ---
  760. [ 5.882694] mmc0: BKOPS_EN bit = 1
  761. [ 5.884224] yas_set_enable: [CCI]gpio_tlmm_config => pin(64), GPIO_CFG_OUTPUT, HL=1, GPIO_CFG_2MA
  762. [ 5.884574] [CCI]yas_probe: yas533_probe end ---
  763. [ 5.884663] [CCI]yas_probe: yas_kionix_accel_probe start ---
  764. [ 5.910310] mmc0: new HS200 MMC card at address 0001
  765. [ 5.913458] mmcblk0: mmc0:0001 M8G1GC 7.28 GiB
  766. [ 5.916413] mmcblk0rpmb: mmc0:0001 M8G1GC partition 3 512 KiB
  767. [ 5.922699] mmcblk0: p1 p2 p3 p4 p5 p6 p7 p8 p9 p10 p11 p12 p13 p14 p15 p16 p17 p18 p19 p20 p21 p22 p23 p24 p25 p26 p27 p28 p29 p30
  768. [ 6.015862] [CCI]yas_probe: yas_kionix_accel_probe end ---
  769. [ 6.019533] zram: Created 1 device(s) ...
  770. [ 6.022175] ashmem: initialized
  771. [ 6.023573] logger: created 256K log 'log_main'
  772. [ 6.026788] logger: created 256K log 'log_events'
  773. [ 6.030202] logger: created 256K log 'log_radio'
  774. [ 6.033468] logger: created 256K log 'log_system'
  775. [ 6.037531] sps:BAM 0xf9a44000 is registered.
  776. [ 6.037532] usb_bam_ipa_create_resources: Failed to create USB_PROD resource
  777. [ 6.045943] qcom,qpnp-power-on qpnp-power-on-1: PMIC@SID0 Power-on reason: Triggered from Hard Reset and 'cold' boot
  778. [ 6.054800] qcom,qpnp-power-on qpnp-power-on-1: PMIC@SID0: Power-off reason: Triggered from PS_HOLD (PS_HOLD/MSM controlled shutdown)
  779. [ 6.065723] input: qpnp_pon as /devices/virtual/input/input5
  780. [ 6.071472] PMIC@SID0: PM8226 v2.2 options: 0, 0, 2, 2
  781. [ 6.074502] usbcore: registered new interface driver snd-usb-audio
  782. [ 6.092484] msm-compr-dsp msm-compr-dsp: msm_compr_probe: dev name msm-compr-dsp
  783. [ 6.098189] msm-pcm-lpa msm-pcm-lpa: msm_pcm_probe: dev name msm-pcm-lpa
  784. [ 6.103945] platform qcom,msm-voip-dsp.50: Driver msm-voip-dsp requests probe deferral
  785. [ 6.109988] platform qcom,msm-pcm-voice.51: Driver msm-pcm-voice requests probe deferral
  786. [ 6.119884] platform sound.42: Driver msm8226-asoc-tapan requests probe deferral
  787. [ 6.125134] platform sound-9302.43: Driver msm8226-asoc-tapan requests probe deferral
  788. [ 6.128512] mmc1: new ultra high speed DDR50 SDHC card at address aaaa
  789. [ 6.136714] mmcblk1: mmc1:aaaa SL16G 14.8 GiB
  790. [ 6.137148] Netfilter messages via NETLINK v0.30.
  791. [ 6.137217] nf_conntrack version 0.5.0 (14043 buckets, 56172 max)
  792. [ 6.137766] ctnetlink v0.93: registering with nfnetlink.
  793. [ 6.137805] NF_TPROXY: Transparent proxy support initialized, version 4.1.0
  794. [ 6.137807] NF_TPROXY: Copyright (c) 2006-2007 BalaBit IT Ltd.
  795. [ 6.138054] xt_time: kernel timezone is -0000
  796. [ 6.138461] ip_tables: (C) 2000-2006 Netfilter Core Team
  797. [ 6.138719] arp_tables: (C) 2002 David S. Miller
  798. [ 6.138782] TCP: cubic registered
  799. [ 6.138784] Initializing XFRM netlink socket
  800. [ 6.139198] NET: Registered protocol family 10
  801. [ 6.142025] Mobile IPv6
  802. [ 6.142052] ip6_tables: (C) 2000-2006 Netfilter Core Team
  803. [ 6.142237] IPv6 over IPv4 tunneling driver
  804. [ 6.142789] NET: Registered protocol family 17
  805. [ 6.142815] NET: Registered protocol family 15
  806. [ 6.142890] Bridge firewalling registered
  807. [ 6.142901] Ebtables v2.0 registered
  808. [ 6.199945] Bluetooth: RFCOMM TTY layer initialized
  809. [ 6.203333] Bluetooth: RFCOMM socket layer initialized
  810. [ 6.207160] Bluetooth: RFCOMM ver 1.11
  811. [ 6.209567] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
  812. [ 6.210152] mmcblk1: p1
  813. [ 6.214828] Bluetooth: BNEP filters: protocol multicast
  814. [ 6.218768] Bluetooth: HIDP (Human Interface Emulation) ver 1.2
  815. [ 6.224515] Registering SWP/SWPB emulation handler
  816. [ 6.302815] platform sound-9302.43: Driver msm8226-asoc-tapan requests probe deferral
  817. [ 6.303693] gpio_keys_probe(): cci_hwid=1 doesn't match dt_hwid=0
  818. [ 6.303719] gpio_keys_probe(): cci_hwid=1 match dt_hwid=1
  819. [ 6.303795] gpio_set_debounce: gpio-108 status -22
  820. [ 6.304042] gpio_set_debounce: gpio-107 status -22
  821. [ 6.304180] gpio_set_debounce: gpio-106 status -22
  822. [ 6.304505] input: gpio-keys as /devices/gpio_keys_dvt.74/input/input6
  823. [ 6.322501] qcom,qpnp-rtc qpnp-rtc-13: setting system clock to 1970-01-01 00:07:01 UTC (421)
  824. [ 6.323222] platform sound.42: Driver msm8226-asoc-tapan requests probe deferral
  825. [ 6.324241] qcom,leds-qpnp leds-qpnp-22: Flash wa regulator get failed(-517)
  826. [ 6.324263] qcom,leds-qpnp leds-qpnp-22: Regulator get failed(-517)
  827. [ 6.324267] qcom,leds-qpnp leds-qpnp-22: Unable to read flash config data
  828. [ 6.324279] spmi leds-qpnp-22: Driver qcom,leds-qpnp requests probe deferral
  829. [ 6.329379] flash_wa:
  830. [ 6.329736] batfet:
  831. [ 6.329958] 8226_smbbp_boost: 5000 mV
  832. [ 6.330204] 8226_smbbp_otg:
  833. [ 6.330233] 8226_smbbp_otg: supplied by 8226_smbbp_boost
  834. [ 6.346147] qpnp_charger_probe: success chg_dis = 0, bpd = 1, usb = 1, dc = 0 b_health = 1 batt_present = 1
  835. [ 6.376600] msm_thermal:interrupt_mode_init Interrupt mode init
  836. [ 6.381229] clock_late_init: Removing enables held for handed-off clocks
  837. [ 6.392091] ALSA device list:
  838. [ 6.392720] No soundcards found.
  839. [ 6.395285] Freeing init memory: 44K
  840. [ 6.398958] init: init first stage started!
  841. [ 6.407004] SELinux: 2048 avtab hash slots, 16050 rules.
  842. [ 6.419229] SELinux: 2048 avtab hash slots, 16050 rules.
  843. [ 6.419273] SELinux: 1 users, 2 roles, 1143 types, 0 bools
  844. [ 6.419276] , 1 sens, 1024 cats
  845. [ 6.419277]
  846. [ 6.420255] SELinux: 63 classes, 16050 rules
  847. [ 6.423114] SELinux: Completing initialization.
  848. [ 6.423118] SELinux: Setting up existing superblocks.
  849. [ 6.423142] SELinux: initialized (dev sysfs, type sysfs), uses genfs_contexts
  850. [ 6.423169] SELinux: initialized (dev rootfs, type rootfs), uses genfs_contexts
  851. [ 6.423242] SELinux: initialized (dev bdev, type bdev), not configured for labeling
  852. [ 6.423259] SELinux: initialized (dev proc, type proc), uses genfs_contexts
  853. [ 6.423281] SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
  854. [ 6.423306] SELinux: initialized (dev debugfs, type debugfs), uses genfs_contexts
  855. [ 6.450968] SELinux: initialized (dev sockfs, type sockfs), uses task SIDs
  856. [ 6.450986] SELinux: initialized (dev pipefs, type pipefs), uses task SIDs
  857. [ 6.450999] SELinux: initialized (dev anon_inodefs, type anon_inodefs), not configured for labeling
  858. [ 6.451013] SELinux: initialized (dev devpts, type devpts), uses transition SIDs
  859. [ 6.451038] SELinux: initialized (dev configfs, type configfs), uses genfs_contexts
  860. [ 6.451056] SELinux: initialized (dev selinuxfs, type selinuxfs), uses genfs_contexts
  861. [ 6.451122] SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
  862. [ 6.451148] SELinux: initialized (dev sysfs, type sysfs), uses genfs_contexts
  863. [ 6.464233] type=1403 audit(421.650:2): policy loaded auid=4294967295 ses=4294967295
  864. [ 6.470545] init: (Initializing SELinux non-enforcing took 0.07s.)
  865. [ 6.481879] init: init second stage started!
  866. [ 6.501351] init: Running restorecon...
  867. [ 6.730963] BMS: qpnp_bms_probe: probe success: soc =20 vbatt = 3685873 ocv = 3731000 r_sense_uohm = 10000 warm_reset = 0
  868. [ 6.741240] msm_otg f9a55000.usb: phy_reset: success
  869. [ 6.744406] platform sound.42: Driver msm8226-asoc-tapan requests probe deferral
  870. [ 6.751843] platform sound-9302.43: Driver msm8226-asoc-tapan requests probe deferral
  871. [ 6.758870] Registered led device: led:flash_0
  872. [ 6.759036] Registered led device: led:flash_torch
  873. [ 6.760469] platform sound-9302.43: Driver msm8226-asoc-tapan requests probe deferral
  874. [ 6.767904] platform sound.42: Driver msm8226-asoc-tapan requests probe deferral
  875. [ 6.895882] init: waitpid failed: No child processes
  876. [ 6.899213] init: (Loading properties from /default.prop took 0.00s.)
  877. [ 6.907306] init: (Parsing /init.magisk.rc took 0.00s.)
  878. [ 6.910369] init: (Parsing /init.environ.rc took 0.00s.)
  879. [ 6.915128] init: (Parsing /init.usb.rc took 0.00s.)
  880. [ 6.920505] init: (Parsing init.common.rc took 0.00s.)
  881. [ 6.924029] init: (Parsing init.common.usb.rc took 0.00s.)
  882. [ 6.928485] init: (Parsing init.yukon.pwr.rc took 0.00s.)
  883. [ 6.931571] init: (Parsing /init.eagle.rc took 0.01s.)
  884. [ 6.936762] init: (Parsing /init.usb.configfs.rc took 0.00s.)
  885. [ 6.940377] init: (Parsing /init.zygote32.rc took 0.00s.)
  886. [ 6.944271] init: (Parsing /init.rc took 0.04s.)
  887. [ 6.948298] init: Starting service 'ueventd'...
  888. [ 6.951628] init: Waiting for /dev/.coldboot_done...
  889. [ 6.956388] ueventd: ueventd started!
  890. [ 6.979049] msm_hsusb msm_hsusb: CI13XXX_CONTROLLER_RESET_EVENT received
  891. [ 7.963419] init: Timed out waiting for /dev/.coldboot_done
  892. [ 7.966679] init: Waiting for /dev/.coldboot_done took 1.02s.
  893. [ 8.017253] SELinux: initialized (dev cgroup, type cgroup), uses genfs_contexts
  894. [ 8.019571] SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
  895. [ 8.024650] init: write_file: Unable to open '/proc/sys/kernel/hung_task_timeout_secs': No such file or directory
  896. [ 8.067339] SELinux: initialized (dev cgroup, type cgroup), uses genfs_contexts
  897. [ 8.073159] init: write_file: Unable to open '/proc/sys/abi/swp': No such file or directory
  898. [ 8.080297] SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
  899. [ 8.081748] init: write_file: Unable to open '/sys/block/zram0/comp_algorithm': No such file or directory
  900. [ 8.089122] init: write_file: Unable to open '/sys/block/zram0/max_comp_streams': No such file or directory
  901. [ 8.099897] mmc0: Starting deferred resume
  902. [ 8.161821] mmc0: Deferred resume completed
  903. [ 8.166912] EXT4-fs (mmcblk0p26): mounted filesystem with ordered data mode. Opts: barrier=1
  904. [ 8.173070] SELinux: initialized (dev mmcblk0p26, type ext4), uses xattr
  905. [ 8.173203] fs_mgr: __mount(source=/dev/block/bootdevice/by-name/system,target=/system,type=ext4)=0
  906. [ 8.186608] EXT4-fs (mmcblk0p27): VFS: Can't find ext4 filesystem
  907. [ 8.197151] fs_mgr: __mount(source=/dev/block/bootdevice/by-name/cache,target=/cache,type=ext4)=-1
  908. [ 8.214208] SELinux: initialized (dev mmcblk0p27, type f2fs), uses xattr
  909. [ 8.214307] fs_mgr: __mount(source=dev/block/bootdevice/by-name/cache,target=/cache,type=f2fs)=0
  910. [ 8.220828] fs_mgr: mount_with_alternatives(): Mounted dev/block/bootdevice/by-name/cache on /cache with fs_type=f2fs instead of ext4
  911. [ 8.231930] ueventd: Coldboot took 1.27s.
  912. [ 8.234653] EXT4-fs (mmcblk0p29): VFS: Can't find ext4 filesystem
  913. [ 8.239087] fs_mgr: __mount(source=/dev/block/bootdevice/by-name/userdata,target=/data,type=ext4)=-1
  914. [ 8.268740] SELinux: initialized (dev mmcblk0p29, type f2fs), uses xattr
  915. [ 8.268836] fs_mgr: __mount(source=/dev/block/bootdevice/by-name/userdata,target=/data,type=f2fs)=0
  916. [ 8.275558] fs_mgr: mount_with_alternatives(): Mounted /dev/block/bootdevice/by-name/userdata on /data with fs_type=f2fs instead of ext4
  917. [ 8.295978] SELinux: initialized (dev mmcblk0p19, type vfat), uses mountpoint labeling
  918. [ 8.296018] fs_mgr: __mount(source=/dev/block/bootdevice/by-name/modem,target=/firmware,type=vfat)=0
  919. [ 8.306191] EXT4-fs (mmcblk0p24): barriers disabled
  920. [ 8.309440] EXT4-fs (mmcblk0p24): mounted filesystem with ordered data mode. Opts: barrier=0
  921. [ 8.315855] SELinux: initialized (dev mmcblk0p24, type ext4), uses xattr
  922. [ 8.315896] fs_mgr: __mount(source=/dev/block/bootdevice/by-name/LTALabel,target=/lta-label,type=ext4)=0
  923. [ 8.333649] EXT4-fs (mmcblk0p15): mounted filesystem with ordered data mode. Opts: errors=remount-ro,nomblk_io_submit
  924. [ 8.341945] SELinux: initialized (dev mmcblk0p15, type ext4), uses xattr
  925. [ 8.342034] fs_mgr: check_fs(): mount(/dev/block/bootdevice/by-name/persist,/persist,ext4)=0: Success
  926. [ 8.357131] fs_mgr: check_fs(): unmount(/persist) succeeded
  927. [ 8.362228] fs_mgr: Running /system/bin/e2fsck on /dev/block/bootdevice/by-name/persist
  928. [ 8.424506] type=1400 audit(423.600:3): avc: denied { getattr } for pid=202 comm="e2fsck" path="/dev/block/mmcblk0p15" dev="tmpfs" ino=8878 scontext=u:r:fsck:s0 tcontext=u:object_r:block_device:s0 tclass=blk_file permissive=1
  929. [ 8.442668] type=1400 audit(423.620:4): avc: denied { read } for pid=202 comm="e2fsck" name="mmcblk0p15" dev="tmpfs" ino=8878 scontext=u:r:fsck:s0 tcontext=u:object_r:block_device:s0 tclass=blk_file permissive=1
  930. [ 8.460172] type=1400 audit(423.640:5): avc: denied { open } for pid=202 comm="e2fsck" name="mmcblk0p15" dev="tmpfs" ino=8878 scontext=u:r:fsck:s0 tcontext=u:object_r:block_device:s0 tclass=blk_file permissive=1
  931. [ 8.478042] type=1400 audit(423.660:6): avc: denied { write } for pid=202 comm="e2fsck" name="mmcblk0p15" dev="tmpfs" ino=8878 scontext=u:r:fsck:s0 tcontext=u:object_r:block_device:s0 tclass=blk_file permissive=1
  932. [ 8.495728] type=1400 audit(423.680:7): avc: denied { ioctl } for pid=202 comm="e2fsck" path="/dev/block/mmcblk0p15" dev="tmpfs" ino=8878 ioctlcmd=127c scontext=u:r:fsck:s0 tcontext=u:object_r:block_device:s0 tclass=blk_file permissive=1
  933. [ 8.532659] e2fsck: e2fsck 1.42.9 (28-Dec-2013)
  934.  
  935. [ 8.535042] e2fsck: Pass 1: Checking inodes, blocks, and sizes
  936.  
  937. [ 8.539740] e2fsck: Pass 2: Checking directory structure
  938.  
  939. [ 8.543879] e2fsck: Pass 3: Checking directory connectivity
  940.  
  941. [ 8.548329] e2fsck: Pass 4: Checking reference counts
  942.  
  943. [ 8.552211] e2fsck: Pass 5: Checking group summary information
  944.  
  945. [ 8.556899] e2fsck: /dev/block/bootdevice/by-name/persist: 25/1024 files (0.0% non-contiguous), 1124/4096 blocks
  946.  
  947. [ 8.573354] EXT4-fs (mmcblk0p15): mounted filesystem with ordered data mode. Opts: barrier=1,discard
  948. [ 8.580179] SELinux: initialized (dev mmcblk0p15, type ext4), uses xattr
  949. [ 8.580256] fs_mgr: __mount(source=/dev/block/bootdevice/by-name/persist,target=/persist,type=ext4)=0
  950. [ 8.590577] init: (Parsing /system/etc/init/atrace.rc took 0.00s.)
  951. [ 8.595040] init: (Parsing /system/etc/init/audioserver.rc took 0.00s.)
  952. [ 8.600298] init: (Parsing /system/etc/init/bootanim.rc took 0.00s.)
  953. [ 8.605395] init: (Parsing /system/etc/init/bootstat.rc took 0.00s.)
  954. [ 8.610338] init: (Parsing /system/etc/init/debuggerd.rc took 0.00s.)
  955. [ 8.615447] init: (Parsing /system/etc/init/drmserver.rc took 0.00s.)
  956. [ 8.620788] init: (Parsing /system/etc/init/dumpstate.rc took 0.00s.)
  957. [ 8.625670] init: (Parsing /system/etc/init/gatekeeperd.rc took 0.00s.)
  958. [ 8.631024] init: (Parsing /system/etc/init/init-debug.rc took 0.00s.)
  959. [ 8.636178] init: (Parsing /system/etc/init/installd.rc took 0.00s.)
  960. [ 8.641248] init: (Parsing /system/etc/init/keystore.rc took 0.00s.)
  961. [ 8.646267] init: (Parsing /system/etc/init/lmkd.rc took 0.00s.)
  962. [ 8.651344] init: (Parsing /system/etc/init/logcatd.rc took 0.00s.)
  963. [ 8.655950] init: (Parsing /system/etc/init/logd.rc took 0.00s.)
  964. [ 8.660626] init: (Parsing /system/etc/init/mdnsd.rc took 0.00s.)
  965. [ 8.665369] init: (Parsing /system/etc/init/mediacodec.rc took 0.00s.)
  966. [ 8.670618] init: (Parsing /system/etc/init/mediadrmserver.rc took 0.00s.)
  967. [ 8.676132] init: (Parsing /system/etc/init/mediaextractor.rc took 0.00s.)
  968. [ 8.681744] init: (Parsing /system/etc/init/mediaserver.rc took 0.00s.)
  969. [ 8.686967] init: (Parsing /system/etc/init/mtpd.rc took 0.00s.)
  970. [ 8.691699] init: (Parsing /system/etc/init/netd.rc took 0.00s.)
  971. [ 8.696340] init: (Parsing /system/etc/init/racoon.rc took 0.00s.)
  972. [ 8.701283] init: (Parsing /system/etc/init/rild.rc took 0.00s.)
  973. [ 8.705938] init: (Parsing /system/etc/init/servicemanager.rc took 0.00s.)
  974. [ 8.711478] init: (Parsing /system/etc/init/surfaceflinger.rc took 0.00s.)
  975. [ 8.717057] init: (Parsing /system/etc/init/uncrypt.rc took 0.00s.)
  976. [ 8.721966] init: (Parsing /system/etc/init/vdc.rc took 0.00s.)
  977. [ 8.726579] init: (Parsing /system/etc/init/vold.rc took 0.00s.)
  978. [ 8.773849] Adding 409596k swap on /dev/block/zram0. Priority:-1 extents:1 across:409596k SS
  979. [ 8.782608] pil-q6v5-lpass fe200000.qcom,lpass: adsp: loading from 0x0dc00000 to 0x0f000000
  980. [ 9.131125] pil-q6v5-lpass fe200000.qcom,lpass: adsp: Brought out of reset
  981. [ 9.187037] pil-q6v5-lpass fe200000.qcom,lpass: adsp: Power/Clock ready interrupt received
  982. [ 9.208335] pil-q6v5-lpass fe200000.qcom,lpass: Subsystem error monitoring/handling services are up
  983. [ 9.216126] apr_tal:Q6 Is Up
  984. [ 9.217088] diag: In diag_send_msg_mask_update, invalid status 0
  985. [ 9.218111] diag: In diag_send_log_mask_update, invalid status 0
  986. [ 9.218112] platform sound.42: Driver msm8226-asoc-tapan requests probe deferral
  987. [ 9.218786] adsp-loader qcom,msm-adsp-loader.41: adsp_loader_do: Q6/ADSP image is loaded
  988. [ 9.218916] platform sound-9302.43: Driver msm8226-asoc-tapan requests probe deferral
  989. [ 9.220591] init: write_file: Unable to open '/sys/class/android_usb/android0/f_ffs/aliases': No such file or directory
  990. [ 9.222614] init: Starting service 'logd'...
  991. [ 9.226158] platform sound-9302.43: Driver msm8226-asoc-tapan requests probe deferral
  992. [ 9.227671] platform sound.42: Driver msm8226-asoc-tapan requests probe deferral
  993. [ 9.275322] sps:BAM 0xfe104000 (va:0xc8980000) enabled: ver:0x15, number of pipes:19
  994. [ 9.282334] sps:BAM 0xfe104000 is registered.
  995. [ 9.282335] tapan-slim tapan-slim-pgd: Platform data from device tree
  996. [ 9.289581] tapan-slim tapan-slim-pgd: cdc-vdd-h: vol=[1800000 1800000]uV, curr=[25000]uA, ond 0
  997. [ 9.296961] tapan-slim tapan-slim-pgd: cdc-vdd-px: vol=[1800000 1800000]uV, curr=[25000]uA, ond 0
  998. [ 9.304550] tapan-slim tapan-slim-pgd: cdc-vdd-cx: vol=[1200000 1200000]uV, curr=[2000]uA, ond 0
  999. [ 9.312009] tapan-slim tapan-slim-pgd: cdc-vdd-buck: vol=[1800000 2150000]uV, curr=[650000]uA, ond 1
  1000. [ 9.319834] tapan-slim tapan-slim-pgd: cdc-vdd-buckhelper: vol=[1775000 2125000]uV, curr=[10000]uA, ond 1
  1001. [ 9.328110] tapan-slim tapan-slim-pgd: Looking up qcom,cdc-micbias4-cfilt-sel property in node /soc/slim@fe12f000/tapan_codec failed
  1002. [ 9.328139] tapan-slim tapan-slim-pgd: Looking up qcom,cdc-dmic-sample-rate property in node /soc/slim@fe12f000/tapan_codec failed
  1003. [ 9.328139] logd.auditd: start
  1004. [ 9.328169] logd.klogd: 9321132551
  1005. [ 9.407542] slimbus:1 laddr:0xcb, EAPC:0x1:0xe0
  1006. [ 9.407543] tapan-slim tapan-slim-pgd: wcd9xxx_slim_device_up: slim device up
  1007. [ 9.421691] slimbus:1 laddr:0xca, EAPC:0x0:0xe0
  1008. [ 9.421692] tapan-slim tapan-slim-pgd: wcd9xxx_check_codec_type: detected tapan_codec, major 0x103, minor 0x1, ver 0x1
  1009. [ 9.433279] wcd9xxx_core_res_init: num_irqs = 31, num_irq_regs = 4
  1010. [ 9.449616] tapan_codec tapan_codec: tapan_check_wcd9306: wcd9302 detected
  1011. [ 9.456814] platform sound.42: Driver msm8226-asoc-tapan requests probe deferral
  1012. [ 9.478754] tapan_codec tapan_codec: tapan_codec_probe()
  1013. [ 9.498797] tapan_codec tapan_codec: Failed to add route DEC3 MUX->IIR1 INP1 MUX
  1014. [ 9.511560] asoc: snd-soc-dummy-dai <-> MultiMedia1 mapping ok
  1015. [ 9.515672] asoc: snd-soc-dummy-dai <-> MultiMedia2 mapping ok
  1016. [ 9.520086] asoc: snd-soc-dummy-dai <-> CS-VOICE mapping ok
  1017. [ 9.524378] asoc: snd-soc-dummy-dai <-> VoIP mapping ok
  1018. [ 9.528343] asoc: snd-soc-dummy-dai <-> MultiMedia3 mapping ok
  1019. [ 9.532807] asoc: snd-soc-dummy-dai <-> SLIMBUS0_HOSTLESS mapping ok
  1020. [ 9.537861] asoc: snd-soc-dummy-dai <-> INT_FM_HOSTLESS mapping ok
  1021. [ 9.542636] asoc: msm-stub-rx <-> msm-dai-q6-dev.241 mapping ok
  1022. [ 9.547270] asoc: msm-stub-tx <-> msm-dai-q6-dev.240 mapping ok
  1023. [ 9.551954] compress asoc: snd-soc-dummy-dai <-> MultiMedia4 mapping ok
  1024. [ 9.557233] asoc: snd-soc-dummy-dai <-> AUXPCM_HOSTLESS mapping ok
  1025. [ 9.562062] asoc: snd-soc-dummy-dai <-> SLIMBUS1_HOSTLESS mapping ok
  1026. [ 9.567140] asoc: snd-soc-dummy-dai <-> SLIMBUS3_HOSTLESS mapping ok
  1027. [ 9.572130] asoc: snd-soc-dummy-dai <-> SLIMBUS4_HOSTLESS mapping ok
  1028. [ 9.577206] asoc: snd-soc-dummy-dai <-> Voice2 mapping ok
  1029. [ 9.581386] asoc: snd-soc-dummy-dai <-> MultiMedia5 mapping ok
  1030. [ 9.585843] asoc: snd-soc-dummy-dai <-> MultiMedia9 mapping ok
  1031. [ 9.590320] asoc: snd-soc-dummy-dai <-> VoLTE mapping ok
  1032. [ 9.594277] asoc: snd-soc-dummy-dai <-> QCHAT mapping ok
  1033. [ 9.598256] asoc: snd-soc-dummy-dai <-> LSM1 mapping ok
  1034. [ 9.602205] asoc: snd-soc-dummy-dai <-> MultiMedia8 mapping ok
  1035. [ 9.606651] asoc: snd-soc-dummy-dai <-> LSM2 mapping ok
  1036. [ 9.610584] asoc: snd-soc-dummy-dai <-> LSM3 mapping ok
  1037. [ 9.614454] asoc: snd-soc-dummy-dai <-> LSM4 mapping ok
  1038. [ 9.618375] asoc: snd-soc-dummy-dai <-> LSM5 mapping ok
  1039. [ 9.622275] asoc: snd-soc-dummy-dai <-> LSM6 mapping ok
  1040. [ 9.626175] asoc: snd-soc-dummy-dai <-> LSM7 mapping ok
  1041. [ 9.630119] asoc: snd-soc-dummy-dai <-> LSM8 mapping ok
  1042. [ 9.634024] asoc: snd-soc-dummy-dai <-> INT_HFP_BT_HOSTLESS mapping ok
  1043. [ 9.639342] asoc: snd-soc-dummy-dai <-> MultiMedia6 mapping ok
  1044. [ 9.643776] asoc: snd-soc-dummy-dai <-> VoWLAN mapping ok
  1045. [ 9.647790] asoc: msm-stub-rx <-> msm-dai-q6-dev.12288 mapping ok
  1046. [ 9.652505] asoc: msm-stub-tx <-> msm-dai-q6-dev.12289 mapping ok
  1047. [ 9.657320] asoc: msm-stub-rx <-> msm-dai-q6-dev.12292 mapping ok
  1048. [ 9.662061] asoc: msm-stub-tx <-> msm-dai-q6-dev.12293 mapping ok
  1049. [ 9.666831] asoc: msm-stub-rx <-> msm-dai-q6-dev.224 mapping ok
  1050. [ 9.671266] asoc: msm-stub-tx <-> msm-dai-q6-dev.225 mapping ok
  1051. [ 9.671689] init: Starting service 'magisk_pfs'...
  1052. [ 9.679411] asoc: snd-soc-dummy-dai <-> HDMI_HOSTLESS mapping ok
  1053. [ 9.683944] asoc: msm-stub-rx <-> msm-dai-q6-auxpcm.1 mapping ok
  1054. [ 9.688809] asoc: msm-stub-tx <-> msm-dai-q6-auxpcm.1 mapping ok
  1055. [ 9.693622] asoc: msm-stub-tx <-> msm-dai-q6-dev.32772 mapping ok
  1056. [ 9.698407] asoc: msm-stub-tx <-> msm-dai-q6-dev.32771 mapping ok
  1057. [ 9.703214] asoc: msm-stub-rx <-> msm-dai-q6-dev.32773 mapping ok
  1058. [ 9.707925] asoc: msm-stub-rx <-> msm-dai-q6-dev.32770 mapping ok
  1059. [ 9.880089] init: Service 'magisk_pfs' (pid 241) exited with status 0
  1060. [ 9.890114] init: (Loading properties from /system/build.prop took 0.00s.)
  1061. [ 9.894713] init: (Loading properties from /vendor/build.prop took 0.00s.)
  1062. [ 9.900277] init: (Loading properties from /factory/factory.prop took 0.00s.)
  1063. [ 9.908108] init: Starting service 'debuggerd'...
  1064. [ 9.911154] init: do_start: Service debuggerd64 not found
  1065. [ 9.914955] init: Starting service 'vold'...
  1066. [ 9.920233] init: Not bootcharting.
  1067. [ 9.954963] asoc: tapan9302_rx1 <-> msm-dai-q6-dev.16384 mapping ok
  1068. [ 9.959842] asoc: tapan9302_tx1 <-> msm-dai-q6-dev.16385 mapping ok
  1069. [ 9.964329] asoc: tapan9302_rx1 <-> msm-dai-q6-dev.16386 mapping ok
  1070. [ 9.969206] asoc: tapan9302_tx1 <-> msm-dai-q6-dev.16387 mapping ok
  1071. [ 9.974188] asoc: tapan9302_rx1 <-> msm-dai-q6-dev.16390 mapping ok
  1072. [ 9.978973] asoc: tapan9302_tx1 <-> msm-dai-q6-dev.16391 mapping ok
  1073. [ 9.983906] asoc: tapan9302_rx1 <-> msm-dai-q6-dev.16392 mapping ok
  1074. [ 9.988810] asoc: tapan9302_tx1 <-> msm-dai-q6-dev.16393 mapping ok
  1075. [ 9.993772] asoc: tapan9302_tx1 <-> msm-dai-q6-dev.16395 mapping ok
  1076. [ 10.008056] input: msm8226-tapan9302-snd-card Button Jack as /devices/sound-9302.43/sound/card0/input7
  1077. [ 10.015269] input: msm8226-tapan9302-snd-card Headset Jack as /devices/sound-9302.43/sound/card0/input8
  1078. [ 10.024220] msm8226-asoc-tapan sound-9302.43: Looking up qcom, cdc-lineout-spkr-gpios property in node /soc/sound-9302 failed -22
  1079. [ 10.034613] gpio_request: gpio-440 (TAPAN_CODEC_PMIC_MCLK) status -16
  1080. [ 10.034628] msm8226-asoc-tapan sound.42: msm8226_prepare_codec_mclk: Failed to request tapan mclk gpio 440
  1081. [ 10.042313] msm8226-asoc-tapan: probe of sound.42 failed with error -16
  1082. [ 10.152953] init: Starting service 'exec 1 (/system/bin/tzdatacheck)'...
  1083. [ 10.180504] init: Service 'exec 1 (/system/bin/tzdatacheck)' (pid 278) exited with status 0
  1084. [ 10.184452] mmc1: Starting deferred resume
  1085. [ 10.189557] init: (Loading properties from /data/local.prop took 0.00s.)
  1086. [ 10.274369] init: Found model 2302 setting build properties for D2302 device
  1087. [ 10.279168] init: Starting service 'magisk_pfsd'...
  1088. [ 10.322544] mmc1: Deferred resume completed
  1089. [ 11.141864] EXT4-fs (loop0): recovery complete
  1090. [ 11.145580] EXT4-fs (loop0): mounted filesystem with ordered data mode. Opts: (null)
  1091. [ 11.151024] SELinux: initialized (dev loop0, type ext4), uses xattr
  1092. [ 11.330508] EXT4-fs (loop0): mounted filesystem with ordered data mode. Opts: (null)
  1093. [ 11.335918] SELinux: initialized (dev loop0, type ext4), uses xattr
  1094. [ 11.690298] init: Service 'magisk_pfsd' (pid 283) exited with status 0
  1095. [ 11.701374] init: decode_uid: Unable to find UID for 'persist_rw'. Returning UINT_MAX
  1096. [ 11.706875] init: decode_uid: Unable to find UID for 'persist_rw'. Returning UINT_MAX
  1097. [ 11.727737] init: (Loading properties from /data/local.prop took 0.00s.)
  1098. [ 11.753284] init: property_set("ro.product.model", "Xperia M2 Dual") failed
  1099. [ 11.757949] init: property_set("ro.product.device", "D2302") failed
  1100. [ 11.762864] init: property_set("ro.build.product", "D2302") failed
  1101. [ 11.767756] init: property_set("ro.telephony.default_network", "0,1") failed
  1102. [ 11.773453] init: property_set("ro.telephony.ril.config", "simactivation") failed
  1103. [ 11.783232] init: Found model 2302 setting build properties for D2302 device
  1104. [ 11.788256] init: Starting service 'logd-reinit'...
  1105. [ 11.792420] wcnss_wlan triggered by userspace
  1106. [ 11.796862] wcnss: IRIS Reg: 03000004
  1107. [ 11.817316] logd.daemon: reinit
  1108. [ 11.827072] wcnss_pm_qos_add_request: add request
  1109. [ 11.829431] wcnss_pm_qos_update_request: update request 100
  1110. [ 11.837003] pil_pronto fb21b000.qcom,pronto: wcnss: loading from 0x0d200000 to 0x0d7be000
  1111. [ 11.880319] cyttsp4_loader cyttsp4_loader.main_ttsp_core: _cyttsp4_firmware_cont_builtin: No builtin firmware
  1112. [ 12.034700] pil_pronto fb21b000.qcom,pronto: wcnss: Brought out of reset
  1113. [ 12.850552] pil_pronto fb21b000.qcom,pronto: wcnss: Power/Clock ready interrupt received
  1114. [ 12.957908] pil_pronto fb21b000.qcom,pronto: Subsystem error monitoring/handling services are up
  1115. [ 12.965012] wcnss_pm_qos_update_request: update request -1
  1116. [ 12.968580] wcnss_pm_qos_remove_request: remove request
  1117. [ 12.972540] diag: In diag_send_msg_mask_update, invalid status 0
  1118. [ 12.977497] diag: In diag_send_log_mask_update, invalid status 0
  1119. [ 12.977498] init: Service 'logd-reinit' (pid 812) exited with status 0
  1120. [ 12.991027] init: Starting service 'healthd'...
  1121. [ 12.993974] init: Starting service 'tad_static'...
  1122. [ 12.997844] init: Starting service 'ta_qmi_service'...
  1123. [ 13.002690] init: Starting service 'sct_service'...
  1124. [ 13.006711] init: Starting service 'mlog_qmi_service'...
  1125. [ 13.011286] init: Starting service 'rmt_storage'...
  1126. [ 13.015759] init: Starting service 'qseecomd'...
  1127. [ 13.019560] init: Starting service 'lmkd'...
  1128. [ 13.022992] init: Starting service 'servicemanager'...
  1129. [ 13.028283] init: Starting service 'surfaceflinger'...
  1130. [ 13.062791] init: Starting service 'console'...
  1131. [ 13.065812] enable_store: android_usb: already disabled
  1132. [ 13.082068] init: Starting service 'adbd'...
  1133. [ 13.085101] init: cannot find '/system/bin/update_verifier' (No such file or directory), disabling 'exec 2 (/system/bin/update_verifier)'
  1134. [ 13.087538] pil-q6v5-mss fc880000.qcom,mss: mba: loading from 0x0c300000 to 0x0c33a000
  1135. [ 13.095759] init: cannot find '/system/bin/install-recovery.sh' (No such file or directory), disabling 'flash_recovery'
  1136. [ 13.105138] init: Starting service 'memsicd'...
  1137. [ 13.109173] init: Starting service 'wifi_mac_bootup'...
  1138. [ 13.113214] init: Starting service 'ril-daemon2'...
  1139. [ 13.114984] warning: `qseecomd' uses 32-bit capabilities (legacy support in use)
  1140. [ 13.116924] adb_open
  1141. [ 13.116970] msm_hsusb msm_hsusb: CI13XXX_CONTROLLER_CONNECT_EVENT received
  1142. [ 13.117010] init: Starting service 'thermal-engine'...
  1143. [ 13.120114] type=1400 audit(428.290:8): avc: denied { read } for pid=856 comm="adbd" name="u:object_r:adbsecure_prop:s0" dev="tmpfs" ino=7174 scontext=u:r:adbd:s0 tcontext=u:object_r:adbsecure_prop:s0 tclass=file permissive=1
  1144. [ 13.120791] type=1400 audit(428.290:9): avc: denied { open } for pid=856 comm="adbd" name="u:object_r:adbsecure_prop:s0" dev="tmpfs" ino=7174 scontext=u:r:adbd:s0 tcontext=u:object_r:adbsecure_prop:s0 tclass=file permissive=1
  1145. [ 13.120940] type=1400 audit(428.290:10): avc: denied { getattr } for pid=856 comm="adbd" path="/dev/__properties__/u:object_r:adbsecure_prop:s0" dev="tmpfs" ino=7174 scontext=u:r:adbd:s0 tcontext=u:object_r:adbsecure_prop:s0 tclass=file permissive=1
  1146. [ 13.130036] init: Starting service 'qmuxd'...
  1147. [ 13.136267] init: Starting service 'netmgrd'...
  1148. [ 13.139801] init: Starting service 'irsc_util'...
  1149. [ 13.144169] init: Starting service 'sensors'...
  1150. [ 13.145704] type=1400 audit(428.320:11): avc: denied { append } for pid=883 comm="memsicd" name="memsicd.log" dev="mmcblk0p29" ino=48222 scontext=u:r:init:s0 tcontext=u:object_r:sensors_data_file:s0 tclass=file permissive=1
  1151. [ 13.156636] pil-q6v5-mss fc880000.qcom,mss: mba: Brought out of reset
  1152. [ 13.157093] init: Starting service 'zygote'...
  1153. [ 13.163608] init: Starting service 'audioserver'...
  1154. [ 13.167997] pil-q6v5-mss fc880000.qcom,mss: modem: loading from 0x08400000 to 0x0c300000
  1155. [ 13.169652] init: Starting service 'drm'...
  1156. [ 13.175510] init: Starting service 'installd'...
  1157. [ 13.183500] init: Starting service 'keystore'...
  1158. [ 13.187202] init: Starting service 'mediacodec'...
  1159. [ 13.190962] init: Starting service 'mediadrm'...
  1160. [ 13.194807] type=1400 audit(428.320:12): avc: denied { ioctl } for pid=883 comm="memsicd" path="/dev/input/event8" dev="tmpfs" ino=7743 ioctlcmd=4506 scontext=u:r:init:s0 tcontext=u:object_r:input_device:s0 tclass=chr_file permissive=1
  1161. [ 13.208343] init: Starting service 'mediaextractor'...
  1162. [ 13.212576] init: Starting service 'media'...
  1163. [ 13.215650] init: Starting service 'netd'...
  1164. [ 13.217390] type=1400 audit(428.390:13): avc: denied { search } for pid=873 comm="thermal-engine" name="battery" dev="sysfs" ino=25628 scontext=u:r:thermal-engine:s0 tcontext=u:object_r:sysfs_battery_supply:s0 tclass=dir permissive=1
  1165. [ 13.218969] wcnss_wlan_ctrl_probe: SMD ctrl channel up
  1166. [ 13.219979] type=1400 audit(428.390:14): avc: denied { read } for pid=873 comm="thermal-engine" name="capacity" dev="sysfs" ino=25654 scontext=u:r:thermal-engine:s0 tcontext=u:object_r:sysfs_battery_supply:s0 tclass=file permissive=1
  1167. [ 13.220147] type=1400 audit(428.390:15): avc: denied { open } for pid=873 comm="thermal-engine" name="capacity" dev="sysfs" ino=25654 scontext=u:r:thermal-engine:s0 tcontext=u:object_r:sysfs_battery_supply:s0 tclass=file permissive=1
  1168. [ 13.220466] msm_otg f9a55000.usb: Avail curr from USB = 100
  1169. [ 13.220791] android_work: android_work: did not send uevent (0 0 (null))
  1170. [ 13.223232] wcnss: version 01050102
  1171. [ 13.223319] wcnss: schedule dnld work for pronto
  1172. [ 13.224397] wcnss: build version 0111
  1173. [ 13.225494] init: Starting service 'ril-daemon'...
  1174. [ 13.235125] init: Service 'memsicd' (pid 861) exited with status 0
  1175. [ 13.240747] init: Starting service 'magisk_service'...
  1176. [ 13.245178] init: Starting service 'wcnss_service'...
  1177. [ 13.249283] init: Starting service 'qcamerasvr'...
  1178. [ 13.252507] init: couldn't write 962 to /dev/cpuset/camera-daemon/tasks: No such file or directory
  1179. [ 13.253137] init: Starting service 'timekeep'...
  1180. [ 13.254436] init: Starting service 'gatekeeperd'...
  1181. [ 13.288981] android_work: android_work: sent uevent USB_STATE=CONNECTED
  1182. [ 13.361532] android_usb gadget: high-speed config #1: fe8050c8.android_usb
  1183. [ 13.361579] msm_otg f9a55000.usb: Avail curr from USB = 500
  1184. [ 13.386214] type=1400 audit(428.550:16): avc: denied { getattr } for pid=893 comm="rm" path="/data/misc/wifi/WCNSS_qcom_cfg.ini" dev="mmcblk0p29" ino=28103 scontext=u:r:qti_init_shell:s0 tcontext=u:object_r:wifi_data_file:s0 tclass=file permissive=1
  1185. [ 13.408189] init: Service 'irsc_util' (pid 886) exited with status 0
  1186. [ 13.412656] msm_thermal:set_enabled enabled = 0
  1187. [ 13.417138] android_work: android_work: sent uevent USB_STATE=CONFIGURED
  1188. [ 13.478819] type=1400 audit(428.550:17): avc: denied { write } for pid=893 comm="rm" name="WCNSS_qcom_cfg.ini" dev="mmcblk0p29" ino=28103 scontext=u:r:qti_init_shell:s0 tcontext=u:object_r:wifi_data_file:s0 tclass=file permissive=1
  1189. [ 13.479297] type=1400 audit(428.550:18): avc: denied { write } for pid=893 comm="rm" name="wifi" dev="mmcblk0p29" ino=48120 scontext=u:r:qti_init_shell:s0 tcontext=u:object_r:wifi_data_file:s0 tclass=dir permissive=1
  1190. [ 13.479624] type=1400 audit(428.550:19): avc: denied { remove_name } for pid=893 comm="rm" name="WCNSS_qcom_cfg.ini" dev="mmcblk0p29" ino=28103 scontext=u:r:qti_init_shell:s0 tcontext=u:object_r:wifi_data_file:s0 tclass=dir permissive=1
  1191. [ 13.540316] init: Service 'timekeep' (pid 963) exited with status 0
  1192. [ 13.787520] type=1400 audit(428.550:20): avc: denied { unlink } for pid=893 comm="rm" name="WCNSS_qcom_cfg.ini" dev="mmcblk0p29" ino=28103 scontext=u:r:qti_init_shell:s0 tcontext=u:object_r:wifi_data_file:s0 tclass=file permissive=1
  1193. [ 13.801536] QSEECOM: qseecom_load_app: App (keymaster) does'nt exist, loading apps for first time
  1194. [ 13.849811] QSEECOM: qseecom_load_app: App with id 2 (keymaster) now loaded
  1195. [ 13.907708] type=1400 audit(428.560:21): avc: denied { create } for pid=873 comm="thermal-engine" name="thermal-send-client" scontext=u:r:thermal-engine:s0 tcontext=u:object_r:socket_device:s0 tclass=sock_file permissive=1
  1196. [ 13.907923] type=1400 audit(428.560:22): avc: denied { setattr } for pid=873 comm="thermal-engine" name="thermal-send-client" dev="tmpfs" ino=10637 scontext=u:r:thermal-engine:s0 tcontext=u:object_r:socket_device:s0 tclass=sock_file permissive=1
  1197. [ 13.908058] type=1400 audit(428.650:23): avc: denied { ioctl } for pid=883 comm="memsicd" path="/dev/input/event4" dev="tmpfs" ino=8761 ioctlcmd=4506 scontext=u:r:init:s0 tcontext=u:object_r:input_device:s0 tclass=chr_file permissive=1
  1198. [ 13.908194] type=1400 audit(428.700:24): avc: denied { read } for pid=982 comm="cp" name="WCNSS_qcom_cfg.ini" dev="mmcblk0p29" ino=28433 scontext=u:r:qti_init_shell:s0 tcontext=u:object_r:wifi_data_file:s0 tclass=file permissive=1
  1199. [ 13.908554] type=1400 audit(428.710:25): avc: denied { write } for pid=963 comm="timekeep" name="ats_2" dev="mmcblk0p29" ino=49897 scontext=u:r:timekeep:s0 tcontext=u:object_r:time_data_file:s0 tclass=file permissive=1
  1200. [ 13.908848] type=1400 audit(428.710:26): avc: denied { open } for pid=963 comm="timekeep" name="ats_2" dev="mmcblk0p29" ino=49897 scontext=u:r:timekeep:s0 tcontext=u:object_r:time_data_file:s0 tclass=file permissive=1
  1201. [ 13.909146] type=1400 audit(428.720:27): avc: denied { setattr } for pid=963 comm="timekeep" name="ats_2" dev="mmcblk0p29" ino=49897 scontext=u:r:timekeep:s0 tcontext=u:object_r:time_data_file:s0 tclass=file permissive=1
  1202. [ 13.909449] type=1400 audit(428.720:28): avc: denied { getattr } for pid=963 comm="timekeep" path="/data/time/ats_2" dev="mmcblk0p29" ino=49897 scontext=u:r:timekeep:s0 tcontext=u:object_r:time_data_file:s0 tclass=file permissive=1
  1203. [ 13.909744] type=1400 audit(1495199313.010:29): avc: denied { open } for pid=982 comm="cp" name="WCNSS_qcom_cfg.ini" dev="mmcblk0p29" ino=28433 scontext=u:r:qti_init_shell:s0 tcontext=u:object_r:wifi_data_file:s0 tclass=file permissive=1
  1204. [ 13.910050] type=1400 audit(1495199313.010:30): avc: denied { read write } for pid=880 comm="qmuxd" name="diag" dev="tmpfs" ino=8665 scontext=u:r:qmuxd:s0 tcontext=u:object_r:diag_device:s0 tclass=chr_file permissive=1
  1205. [ 13.910614] type=1400 audit(1495199313.010:31): avc: denied { open } for pid=880 comm="qmuxd" name="diag" dev="tmpfs" ino=8665 scontext=u:r:qmuxd:s0 tcontext=u:object_r:diag_device:s0 tclass=chr_file permissive=1
  1206. [ 13.910747] type=1400 audit(1495199313.010:32): avc: denied { ioctl } for pid=880 comm="qmuxd" path="/dev/diag" dev="tmpfs" ino=8665 ioctlcmd=20 scontext=u:r:qmuxd:s0 tcontext=u:object_r:diag_device:s0 tclass=chr_file permissive=1
  1207. [ 13.910879] type=1400 audit(1495199313.130:33): avc: denied { getattr } for pid=1016 comm="chown" path="/data/misc/wifi/WCNSS_qcom_cfg.ini" dev="mmcblk0p29" ino=28433 scontext=u:r:qti_init_shell:s0 tcontext=u:object_r:wifi_data_file:s0 tclass=file permissive=1
  1208. [ 13.911208] type=1400 audit(1495199313.130:34): avc: denied { setattr } for pid=1016 comm="chown" name="WCNSS_qcom_cfg.ini" dev="mmcblk0p29" ino=28433 scontext=u:r:qti_init_shell:s0 tcontext=u:object_r:wifi_data_file:s0 tclass=file permissive=1
  1209. [ 13.923408] MSM-CPP cpp_load_fw:922 MC Bootloader Version: 0x312e3176
  1210. [ 13.929014] MSM-CPP cpp_load_fw:935 CPP FW Version: 0x1002000a
  1211. [ 13.977250] type=1400 audit(1495199313.410:35): avc: denied { execmod } for pid=962 comm="mm-qcamera-daem" path="/system/vendor/lib/libmmcamera_faceproc.so" dev="mmcblk0p26" ino=24208 scontext=u:r:mm-qcamerad:s0 tcontext=u:object_r:system_file:s0 tclass=file permissive=1
  1212. [ 14.118382] init: Untracked pid 883 exited with status 255
  1213. [ 14.509014] init: Starting service 'bootanim'...
  1214. [ 14.521624] type=1400 audit(1495199313.970:36): avc: denied { write } for pid=1095 comm="wifimactool" name="tad" dev="tmpfs" ino=9834 scontext=u:r:qti_init_shell:s0 tcontext=u:object_r:tad_socket:s0 tclass=sock_file permissive=1
  1215. [ 14.561183] type=1400 audit(1495199313.970:37): avc: denied { connectto } for pid=1095 comm="wifimactool" path="/dev/socket/tad" scontext=u:r:qti_init_shell:s0 tcontext=u:r:tad:s0 tclass=unix_stream_socket permissive=1
  1216. [ 14.666519] msm_pcm_volume_ctl_get substream runtime not found
  1217. [ 14.677543] msm_pcm_volume_ctl_get substream runtime not found
  1218. [ 14.688466] msm_pcm_volume_ctl_get substream runtime not found
  1219. [ 14.692042] msm_pcm_volume_ctl_get substream runtime not found
  1220. [ 14.735461] type=1400 audit(1495199314.180:38): avc: denied { execmod } for pid=947 comm="mediaserver" path="/system/lib/libmorpho_edit_engine.so" dev="mmcblk0p26" ino=96206 scontext=u:r:mediaserver:s0 tcontext=u:object_r:system_file:s0 tclass=file permissive=1
  1221. [ 14.819133] msm_audio_ion_import: DMA Buf name=audio_acdb_client, fd=12 handle=ebcd5600
  1222. [ 14.848837] q6asm_callback: cmd = 0x10bcd returned error = 0x5
  1223. [ 14.868688] q6asm_callback: cmd = 0x10bcd returned error = 0x5
  1224. [ 14.918304] q6asm_callback: cmd = 0x10bcd returned error = 0x5
  1225. [ 14.938174] q6asm_callback: cmd = 0x10bcd returned error = 0x5
  1226. [ 14.984430] type=1400 audit(1495199314.430:39): avc: denied { read write } for pid=1172 comm="wifimactool" name="WCNSS_qcom_cfg.ini" dev="mmcblk0p29" ino=28433 scontext=u:r:qti_init_shell:s0 tcontext=u:object_r:wifi_data_file:s0 tclass=file permissive=1
  1227. [ 14.984991] type=1400 audit(1495199314.430:40): avc: denied { open } for pid=1172 comm="wifimactool" name="WCNSS_qcom_cfg.ini" dev="mmcblk0p29" ino=28433 scontext=u:r:qti_init_shell:s0 tcontext=u:object_r:wifi_data_file:s0 tclass=file permissive=1
  1228. [ 15.039428] init: Service 'wifi_mac_bootup' (pid 863) exited with status 0
  1229. [ 15.136107] pil-q6v5-mss fc880000.qcom,mss: modem: Brought out of reset
  1230. [ 15.187833] Notify: smsm init
  1231. [ 15.231261] pil-q6v5-mss fc880000.qcom,mss: mba: Power/Clock ready interrupt received
  1232. [ 15.231302] pil-q6v5-mss fc880000.qcom,mss: Subsystem error monitoring/handling services are up
  1233. [ 15.383859] apr_tal:Modem Is Up
  1234. [ 15.427110] diag: In diag_send_msg_mask_update, invalid status 0
  1235. [ 15.708051] diag: In diag_send_log_mask_update, invalid status 0
  1236. [ 15.716497] sps:BAM 0xfc834000 is registered.
  1237. [ 15.716498] sps:BAM 0xfc834000 (va:0xc91f8000) enabled: ver:0x22, number of pipes:6
  1238. [ 15.835122] wcnss: NV download
  1239. [ 15.835124] wcnss: NV bin size: 29812, total_fragments: 10
  1240. [ 15.835211] wcnss: no space available for smd frame
  1241. [ 15.867162] wcnss: no space available for smd frame
  1242. [ 15.897158] wcnss: no space available for smd frame
  1243. [ 15.927179] wcnss: no space available for smd frame
Add Comment
Please, Sign In to add comment
Public Pastes
We use cookies for various purposes including analytics. By continuing to use Pastebin, you agree to our use of cookies as described in the Cookies Policy.  OK, I Understand
Not a member of Pastebin yet?
Sign Up, it unlocks many cool features!