armoon

U3- relocation

Jun 11th, 2020
22
Never
Not a member of Pastebin yet? Sign Up, it unlocks many cool features!
  1. U-Boot 2020.04-2 (Apr 14 2020 - 08:24:03 +0000) Arch Linux ARM
  2.  
  3. CPU: Exynos4412 @ 1 GHz
  4. Model: Odroid based on Exynos4412
  5. Type: u3
  6. DRAM: 2 GiB
  7. LDO20@VDDQ_EMMC_1.8V: set 1800000 uV; enabling
  8. LDO22@VDDQ_EMMC_2.8V: set 2800000 uV; enabling
  9. LDO21@TFLASH_2.8V: set 2800000 uV; enabling
  10. MMC: sdhci@12530000 - probe failed: -19
  11.  
  12. Loading Environment from MMC... *** Warning - bad CRC, using default environment
  13.  
  14. In: serial
  15. Out: serial
  16. Err: serial
  17. Boot device: MMC(0)
  18. Net: No ethernet found.
  19. Hit any key to stop autoboot: 0
  20. no mmc device at slot 2
  21. switch to partitions #0, OK
  22. mmc0(part 0) is current device
  23. Scanning mmc 0:1...
  24. Found U-Boot script /boot/boot.scr
  25. 746 bytes read in 6 ms (121.1 KiB/s)
  26. ## Executing script at 42000000
  27. 7207856 bytes read in 259 ms (26.5 MiB/s)
  28. 73077 bytes read in 58 ms (1.2 MiB/s)
  29. 7536250 bytes read in 272 ms (26.4 MiB/s)
  30. Kernel image @ 0x41000000 [ 0x000000 - 0x6dfbb0 ]
  31. ## Flattened Device Tree blob at 40800000
  32. Booting using the fdt blob at 0x40800000
  33. Loading Ramdisk to 4f8d0000, end 4ffffe7a ... OK
  34. Loading Device Tree to 4f8bb000, end 4f8cfd74 ... OK
  35.  
  36. Starting kernel ...
  37.  
  38. [ 0.000000] Booting Linux on physical CPU 0xa00
  39. [ 0.000000] Linux version 5.7.1-1-ARCH (builduser@leming) (gcc version 9.3.0 (GCC), GNU ld (GNU Binutils) 2.34) #1 SMP PREEMPT Tue Jun 9 01:24:41 UTC 2020
  40. [ 0.000000] CPU: ARMv7 Processor [413fc090] revision 0 (ARMv7), cr=10c5387d
  41. [ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache
  42. [ 0.000000] OF: fdt: Machine model: Hardkernel ODROID-U3 board based on Exynos4412
  43. [ 0.000000] Memory policy: Data cache writealloc
  44. [ 0.000000] Reserved memory: created DMA memory pool at 0xbf700000, size 8 MiB
  45. [ 0.000000] OF: reserved mem: initialized node region_mfc_right, compatible id shared-dma-pool
  46. [ 0.000000] Reserved memory: created DMA memory pool at 0xbd300000, size 36 MiB
  47. [ 0.000000] OF: reserved mem: initialized node region_mfc_left, compatible id shared-dma-pool
  48. [ 0.000000] cma: Reserved 64 MiB at 0xb9000000
  49. [ 0.000000] Samsung CPU ID: 0xe4412220
  50. [ 0.000000] Running under secure firmware.
  51. [ 0.000000] percpu: Embedded 16 pages/cpu s34764 r8192 d22580 u65536
  52. [ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 511040
  53. [ 0.000000] Kernel command line: console=tty1 console=ttySAC1,115200n8 root=PARTUUID=b38ff5da-01 rw rootwait smsc95xx.macaddr=00:1e:ee:61:7a:40 audit=0
  54. [ 0.000000] audit: disabled (until reboot)
  55. [ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes, linear)
  56. [ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes, linear)
  57. [ 0.000000] mem auto-init: stack:off, heap alloc:off, heap free:off
  58. [ 0.000000] Memory: 1933292K/2051072K available (14336K kernel code, 1049K rwdata, 6156K rodata, 2048K init, 880K bss, 52244K reserved, 65536K cma-reserved, 1199104K highmem)
  59. [ 0.000000] random: get_random_u32 called from __kmem_cache_create+0x28/0x38c with crng_init=0
  60. [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
  61. [ 0.000000] rcu: Preemptible hierarchical RCU implementation.
  62. [ 0.000000] rcu: RCU restricting CPUs from NR_CPUS=8 to nr_cpu_ids=4.
  63. [ 0.000000] Tasks RCU enabled.
  64. [ 0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 25 jiffies.
  65. [ 0.000000] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4
  66. [ 0.000000] NR_IRQS: 16, nr_irqs: 16, preallocated irqs: 16
  67. [ 0.000000] L2C: platform modifies aux control register: 0x02070000 -> 0x3e470001
  68. [ 0.000000] L2C: platform provided aux values permit register corruption.
  69. [ 0.000000] L2C: DT/platform modifies aux control register: 0x02070000 -> 0x3e470001
  70. [ 0.000000] L2C-310 erratum 769419 enabled
  71. [ 0.000000] L2C-310 enabling early BRESP for Cortex-A9
  72. [ 0.000000] L2C-310: enabling full line of zeros but not enabled in Cortex-A9
  73. [ 0.000000] L2C-310 ID prefetch enabled, offset 8 lines
  74. [ 0.000000] L2C-310 dynamic clock gating enabled, standby mode enabled
  75. [ 0.000000] L2C-310 cache controller enabled, 16 ways, 1024 kB
  76. [ 0.000000] L2C-310: CACHE_ID 0x4100c4c8, AUX_CTRL 0x7e470001
  77. [ 0.000000] Exynos4x12 clocks: sclk_apll = 1000000000, sclk_mpll = 800000000
  78. [ 0.000000] sclk_epll = 45158401, sclk_vpll = 350000000, arm_clk = 1000000000
  79. [ 0.000000] Switching to timer-based delay loop, resolution 41ns
  80. [ 0.000000] clocksource: mct-frc: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 79635851949 ns
  81. [ 0.000004] sched_clock: 32 bits at 24MHz, resolution 41ns, wraps every 89478484971ns
  82. [ 0.001357] Console: colour dummy device 80x30
  83. [ 0.001932] printk: console [tty1] enabled
  84. [ 0.001979] Calibrating delay loop (skipped), value calculated using timer frequency.. 48.00 BogoMIPS (lpj=96000)
  85. [ 0.002008] pid_max: default: 32768 minimum: 301
  86. [ 0.002229] LSM: Security Framework initializing
  87. [ 0.002458] Smack: Initializing.
  88. [ 0.002472] Smack: IPv6 port labeling enabled.
  89. [ 0.002620] Mount-cache hash table entries: 2048 (order: 1, 8192 bytes, linear)
  90. [ 0.002647] Mountpoint-cache hash table entries: 2048 (order: 1, 8192 bytes, linear)
  91. [ 0.003491] CPU: Testing write buffer coherency: ok
  92. [ 0.003529] CPU0: Spectre v2: using BPIALL workaround
  93. [ 0.003741] CPU0: thread -1, cpu 0, socket 10, mpidr 80000a00
  94. [ 0.004738] Setting up static identity map for 0x40300000 - 0x403000ac
  95. [ 0.006952] rcu: Hierarchical SRCU implementation.
  96. [ 0.007213] soc soc0: Exynos: CPU[EXYNOS4412] PRO_ID[0xe4412220] REV[0x20] Detected
  97. [ 0.009207] smp: Bringing up secondary CPUs ...
  98. [ 0.009982] CPU1: thread -1, cpu 1, socket 10, mpidr 80000a01
  99. [ 0.009989] CPU1: Spectre v2: using BPIALL workaround
  100. [ 0.010872] CPU2: thread -1, cpu 2, socket 10, mpidr 80000a02
  101. [ 0.010879] CPU2: Spectre v2: using BPIALL workaround
  102. [ 0.011722] CPU3: thread -1, cpu 3, socket 10, mpidr 80000a03
  103. [ 0.011728] CPU3: Spectre v2: using BPIALL workaround
  104. [ 0.011880] smp: Brought up 1 node, 4 CPUs
  105. [ 0.011899] SMP: Total of 4 processors activated (192.00 BogoMIPS).
  106. [ 0.011916] CPU: All CPU(s) started in SVC mode.
  107. [ 0.012559] devtmpfs: initialized
  108. [ 0.023117] VFP support v0.3: implementor 41 architecture 3 part 30 variant 9 rev 4
  109. [ 0.023586] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns
  110. [ 0.023623] futex hash table entries: 1024 (order: 4, 65536 bytes, linear)
  111. [ 0.026063] xor: measuring software checksum speed
  112. [ 0.063986] arm4regs : 1558.000 MB/sec
  113. [ 0.103983] 8regs : 1201.000 MB/sec
  114. [ 0.143989] 32regs : 1299.000 MB/sec
  115. [ 0.183986] neon : 1113.000 MB/sec
  116. [ 0.184003] xor: using function: arm4regs (1558.000 MB/sec)
  117. [ 0.184055] pinctrl core: initialized pinctrl subsystem
  118. [ 0.184865] /soc/power-domain@10023c80 has as child subdomain: /soc/power-domain@10023c20.
  119. [ 0.185977] thermal_sys: Registered thermal governor 'fair_share'
  120. [ 0.185981] thermal_sys: Registered thermal governor 'bang_bang'
  121. [ 0.186003] thermal_sys: Registered thermal governor 'step_wise'
  122. [ 0.186020] thermal_sys: Registered thermal governor 'user_space'
  123. [ 0.186877] NET: Registered protocol family 16
  124. [ 0.189422] DMA: preallocated 256 KiB pool for atomic coherent allocations
  125. [ 0.192007] cpuidle: using governor menu
  126. [ 0.192253] No ATAGs?
  127. [ 0.192387] hw-breakpoint: found 5 (+1 reserved) breakpoint and 1 watchpoint registers.
  128. [ 0.192411] hw-breakpoint: maximum watchpoint size is 4 bytes.
  129. [ 0.193931] Serial: AMBA PL011 UART driver
  130. [ 0.207185] genirq: irq_chip COMBINER did not update eff. affinity mask of irq 84
  131. [ 0.367996] raid6: neonx8 gen() 1021 MB/s
  132. [ 0.435991] raid6: neonx8 xor() 677 MB/s
  133. [ 0.503994] raid6: neonx4 gen() 1243 MB/s
  134. [ 0.571990] raid6: neonx4 xor() 870 MB/s
  135. [ 0.639993] raid6: neonx2 gen() 1535 MB/s
  136. [ 0.707999] raid6: neonx2 xor() 1025 MB/s
  137. [ 0.775998] raid6: neonx1 gen() 1195 MB/s
  138. [ 0.844017] raid6: neonx1 xor() 838 MB/s
  139. [ 0.912049] raid6: int32x8 gen() 336 MB/s
  140. [ 0.980040] raid6: int32x8 xor() 204 MB/s
  141. [ 1.048044] raid6: int32x4 gen() 380 MB/s
  142. [ 1.116012] raid6: int32x4 xor() 223 MB/s
  143. [ 1.184062] raid6: int32x2 gen() 480 MB/s
  144. [ 1.252047] raid6: int32x2 xor() 237 MB/s
  145. [ 1.320056] raid6: int32x1 gen() 455 MB/s
  146. [ 1.388036] raid6: int32x1 xor() 193 MB/s
  147. [ 1.388052] raid6: using algorithm neonx2 gen() 1535 MB/s
  148. [ 1.388067] raid6: .... xor() 1025 MB/s, rmw enabled
  149. [ 1.388082] raid6: using neon recovery algorithm
  150. [ 1.394112] iommu: Default domain type: Translated
  151. [ 1.395459] vgaarb: loaded
  152. [ 1.396104] SCSI subsystem initialized
  153. [ 1.396499] usbcore: registered new interface driver usbfs
  154. [ 1.396561] usbcore: registered new interface driver hub
  155. [ 1.396643] usbcore: registered new device driver usb
  156. [ 1.397968] s3c-i2c 13860000.i2c: slave address 0x00
  157. [ 1.397993] s3c-i2c 13860000.i2c: bus frequency set to 390 KHz
  158. [ 1.398563] s3c-i2c 13860000.i2c: i2c-0: S3C I2C adapter
  159. [ 1.398752] s3c-i2c 13870000.i2c: slave address 0x00
  160. [ 1.398774] s3c-i2c 13870000.i2c: bus frequency set to 97 KHz
  161. [ 1.399137] s3c-i2c 13870000.i2c: i2c-1: S3C I2C adapter
  162. [ 1.399292] s3c-i2c 13880000.i2c: slave address 0x00
  163. [ 1.399314] s3c-i2c 13880000.i2c: bus frequency set to 97 KHz
  164. [ 1.399503] s3c-i2c 13880000.i2c: i2c-2: S3C I2C adapter
  165. [ 1.399626] s3c-i2c 138e0000.i2c: slave address 0x00
  166. [ 1.399648] s3c-i2c 138e0000.i2c: bus frequency set to 97 KHz
  167. [ 1.399994] s3c-i2c 138e0000.i2c: i2c-8: S3C I2C adapter
  168. [ 1.400402] mc: Linux media interface: v0.10
  169. [ 1.400444] videodev: Linux video capture interface: v2.00
  170. [ 1.400540] pps_core: LinuxPPS API ver. 1 registered
  171. [ 1.400558] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
  172. [ 1.400590] PTP clock support registered
  173. [ 1.400623] EDAC MC: Ver: 3.0.0
  174. [ 1.402021] Advanced Linux Sound Architecture Driver Initialized.
  175. [ 1.402464] NetLabel: Initializing
  176. [ 1.402481] NetLabel: domain hash size = 128
  177. [ 1.402495] NetLabel: protocols = UNLABELED CIPSOv4 CALIPSO
  178. [ 1.402557] NetLabel: unlabeled traffic allowed by default
  179. [ 1.402934] clocksource: Switched to clocksource mct-frc
  180. [ 1.403182] VFS: Disk quotas dquot_6.6.0
  181. [ 1.403255] VFS: Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
  182. [ 1.412596] NET: Registered protocol family 2
  183. [ 1.413197] tcp_listen_portaddr_hash hash table entries: 512 (order: 0, 6144 bytes, linear)
  184. [ 1.413245] TCP established hash table entries: 8192 (order: 3, 32768 bytes, linear)
  185. [ 1.413321] TCP bind hash table entries: 8192 (order: 4, 65536 bytes, linear)
  186. [ 1.413434] TCP: Hash tables configured (established 8192 bind 8192)
  187. [ 1.413779] UDP hash table entries: 512 (order: 2, 16384 bytes, linear)
  188. [ 1.413824] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes, linear)
  189. [ 1.414039] NET: Registered protocol family 1
  190. [ 1.414488] RPC: Registered named UNIX socket transport module.
  191. [ 1.414509] RPC: Registered udp transport module.
  192. [ 1.414523] RPC: Registered tcp transport module.
  193. [ 1.414538] RPC: Registered tcp NFSv4.1 backchannel transport module.
  194. [ 1.414557] NET: Registered protocol family 44
  195. [ 1.414578] PCI: CLS 0 bytes, default 64
  196. [ 1.415087] Trying to unpack rootfs image as initramfs...
  197. [ 1.813958] Freeing initrd memory: 7360K
  198. [ 1.814746] hw perfevents: enabled with armv7_cortex_a9 PMU driver, 7 counters available
  199. [ 1.831764] Initialise system trusted keyrings
  200. [ 1.831960] workingset: timestamp_bits=14 max_order=19 bucket_order=5
  201. [ 1.836298] zbud: loaded
  202. [ 1.838069] NFS: Registering the id_resolver key type
  203. [ 1.838105] Key type id_resolver registered
  204. [ 1.838120] Key type id_legacy registered
  205. [ 1.838143] nfs4filelayout_init: NFSv4 File Layout Driver Registering...
  206. [ 1.873194] Key type asymmetric registered
  207. [ 1.873220] Asymmetric key parser 'x509' registered
  208. [ 1.873276] bounce: pool size: 64 pages
  209. [ 1.873336] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 246)
  210. [ 1.873528] io scheduler mq-deadline registered
  211. [ 1.873548] io scheduler kyber registered
  212. [ 1.873748] io scheduler bfq registered
  213. [ 1.880040] samsung-usb2-phy 125b0000.exynos-usbphy: supply vbus not found, using dummy regulator
  214. [ 1.899098] dma-pl330 12680000.pdma: Loaded driver for PL330 DMAC-141330
  215. [ 1.899128] dma-pl330 12680000.pdma: DBUFF-32x4bytes Num_Chans-8 Num_Peri-32 Num_Events-32
  216. [ 1.900902] dma-pl330 12690000.pdma: Loaded driver for PL330 DMAC-141330
  217. [ 1.900930] dma-pl330 12690000.pdma: DBUFF-32x4bytes Num_Chans-8 Num_Peri-32 Num_Events-32
  218. [ 1.901586] dma-pl330 12850000.mdma: Loaded driver for PL330 DMAC-141330
  219. [ 1.901613] dma-pl330 12850000.mdma: DBUFF-64x8bytes Num_Chans-8 Num_Peri-1 Num_Events-32
  220. [ 1.908889] Serial: 8250/16550 driver, 6 ports, IRQ sharing enabled
  221. [ 1.912034] Serial: AMBA driver
  222. [ 1.912319] samsung-uart 13800000.serial: IRQ index 1 not found
  223. [ 1.912388] 13800000.serial: ttySAC0 at MMIO 0x13800000 (irq = 63, base_baud = 0) is a S3C6400/10
  224. [ 1.912811] samsung-uart 13810000.serial: IRQ index 1 not found
  225. [ 1.912861] 13810000.serial: ttySAC1 at MMIO 0x13810000 (irq = 64, base_baud = 0) is a S3C6400/10
  226. [ 2.988744] printk: console [ttySAC1] enabled
  227. [ 2.995989] sdhci: Secure Digital Host Controller Interface driver
  228. [ 2.999246] sdhci: Copyright(c) Pierre Ossman
  229. [ 3.004143] s3c-sdhci 12530000.sdhci: clock source 2: mmc_busclk.2 (50000000 Hz)
  230. [ 3.011017] s3c-sdhci 12530000.sdhci: Got CD GPIO
  231. [ 3.016598] Synopsys Designware Multimedia Card Interface Driver
  232. [ 3.022503] dwmmc_exynos 12550000.mmc: IDMAC supports 32-bit address mode.
  233. [ 3.028555] dwmmc_exynos 12550000.mmc: Using internal DMA controller.
  234. [ 3.034938] dwmmc_exynos 12550000.mmc: Version ID is 240a
  235. [ 3.040334] dwmmc_exynos 12550000.mmc: DW MMC controller at irq 121,32 bit host data width,128 deep fifo
  236. [ 3.050372] VUB300 Driver rom wait states = 1C irqpoll timeout = 0400
  237. [ 3.050812] usbcore: registered new interface driver vub300
  238. [ 3.061770] usbcore: registered new interface driver ushc
  239. [ 3.067895] sdhci-pltfm: SDHCI platform and OF driver helper
  240. [ 3.089367] loop: module loaded
  241. [ 3.104942] random: fast init done
  242. [ 3.114302] Loading iSCSI transport class v2.0-870.
  243. [ 3.114830] iscsi: registered transport (tcp)
  244. [ 3.123431] s3c64xx-spi 13930000.spi: spi bus clock parent not specified, using clock at index 0 as parent
  245. [ 3.127556] s3c64xx-spi 13930000.spi: number of chip select lines not specified, assuming 1 chip select line
  246. [ 3.139175] libphy: Fixed MDIO Bus: probed
  247. [ 3.146247] dwc2 12480000.hsotg: dwc2_check_params: Invalid parameter besl=1
  248. [ 3.148478] dwc2 12480000.hsotg: dwc2_check_params: Invalid parameter g_np_tx_fifo_size=1024
  249. [ 3.156908] dwc2 12480000.hsotg: EPs: 16, dedicated fifos, 7808 entries in SPRAM
  250. [ 3.165717] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
  251. [ 3.170779] ehci-pci: EHCI PCI platform driver
  252. [ 3.175218] ehci-platform: EHCI generic platform driver
  253. [ 3.180645] ehci-mxc: Freescale On-Chip EHCI Host driver
  254. [ 3.185782] ehci-omap: OMAP-EHCI Host Controller driver
  255. [ 3.191066] ehci-orion: EHCI orion driver
  256. [ 3.195069] ehci-exynos: EHCI Exynos driver
  257. [ 3.199669] exynos-ehci 12580000.ehci: EHCI Host Controller
  258. [ 3.204639] exynos-ehci 12580000.ehci: new USB bus registered, assigned bus number 1
  259. [ 3.212523] exynos-ehci 12580000.ehci: irq 50, io mem 0x12580000
  260. [ 3.230973] exynos-ehci 12580000.ehci: USB 2.0 started, EHCI 1.00
  261. [ 3.231608] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.07
  262. [ 3.239707] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
  263. [ 3.246901] usb usb1: Product: EHCI Host Controller
  264. [ 3.251755] usb usb1: Manufacturer: Linux 5.7.1-1-ARCH ehci_hcd
  265. [ 3.257659] usb usb1: SerialNumber: 12580000.ehci
  266. [ 3.262815] hub 1-0:1.0: USB hub found
  267. [ 3.266121] hub 1-0:1.0: 3 ports detected
  268. [ 3.270692] tegra-ehci: Tegra EHCI driver
  269. [ 3.274299] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
  270. [ 3.280249] ohci-pci: OHCI PCI platform driver
  271. [ 3.284694] ohci-platform: OHCI generic platform driver
  272. [ 3.290081] ohci-exynos: OHCI Exynos driver
  273. [ 3.294903] usbcore: registered new interface driver uas
  274. [ 3.299388] usbcore: registered new interface driver usb-storage
  275. [ 3.305341] usbcore: registered new interface driver ums-cypress
  276. [ 3.311326] usbcore: registered new interface driver ums_eneub6250
  277. [ 3.317488] usbcore: registered new interface driver ums-freecom
  278. [ 3.323478] usbcore: registered new interface driver ums-isd200
  279. [ 3.329390] usbcore: registered new interface driver ums-usbat
  280. [ 3.356002] usb3503 0-0008: switched to HUB mode
  281. [ 3.356071] usb3503 0-0008: usb3503_probe: probed in hub mode
  282. [ 3.496802] max77686-rtc max77686-rtc: registered as rtc0
  283. [ 3.529519] max77686-rtc max77686-rtc: setting system clock to 2020-06-11T05:08:35 UTC (1591852115)
  284. [ 3.535295] s3c-rtc 10070000.rtc: registered as rtc1
  285. [ 3.539283] i2c /dev entries driver
  286. [ 3.552221] core: _opp_supported_by_regulators: OPP minuV: 900000 maxuV: 900000, not supported by regulator
  287. [ 3.556371] cpu cpu0: _opp_add: OPP not supported by regulators (200000000)
  288. [ 3.563535] core: _opp_supported_by_regulators: OPP minuV: 900000 maxuV: 900000, not supported by regulator
  289. [ 3.573050] cpu cpu0: _opp_add: OPP not supported by regulators (300000000)
  290. [ 3.580140] core: _opp_supported_by_regulators: OPP minuV: 925000 maxuV: 925000, not supported by regulator
  291. [ 3.589678] cpu cpu0: _opp_add: OPP not supported by regulators (400000000)
  292. [ 3.596777] core: _opp_supported_by_regulators: OPP minuV: 950000 maxuV: 950000, not supported by regulator
  293. [ 3.606359] usb 1-2: new high-speed USB device number 2 using exynos-ehci
  294. [ 3.610978] cpu cpu0: _opp_add: OPP not supported by regulators (500000000)
  295. [ 3.620245] core: _opp_supported_by_regulators: OPP minuV: 975000 maxuV: 975000, not supported by regulator
  296. [ 3.629786] cpu cpu0: _opp_add: OPP not supported by regulators (600000000)
  297. [ 3.636889] core: _opp_supported_by_regulators: OPP minuV: 987500 maxuV: 987500, not supported by regulator
  298. [ 3.646449] cpu cpu0: _opp_add: OPP not supported by regulators (700000000)
  299. [ 3.653553] core: _opp_supported_by_regulators: OPP minuV: 1000000 maxuV: 1000000, not supported by regulator
  300. [ 3.663289] cpu cpu0: _opp_add: OPP not supported by regulators (800000000)
  301. [ 3.670375] core: _opp_supported_by_regulators: OPP minuV: 1037500 maxuV: 1037500, not supported by regulator
  302. [ 3.680122] cpu cpu0: _opp_add: OPP not supported by regulators (900000000)
  303. [ 3.687234] core: _opp_supported_by_regulators: OPP minuV: 1087500 maxuV: 1087500, not supported by regulator
  304. [ 3.696967] cpu cpu0: _opp_add: OPP not supported by regulators (1000000000)
  305. [ 3.704971] cpufreq: cpufreq_online: CPU0: Running at unlisted freq: 1000000 KHz
  306. [ 3.712423] cpufreq: cpufreq_online: CPU0: Unlisted initial frequency changed to: 1100000 KHz
  307. [ 3.720929] thermal thermal_zone0: binding zone cpu-thermal with cdev thermal-cpufreq-0 failed:-22
  308. [ 3.729977] ledtrig-cpu: registered to indicate activity on CPUs
  309. [ 3.735326] hid: raw HID events driver (C) Jiri Kosina
  310. [ 3.740122] usbcore: registered new interface driver usbhid
  311. [ 3.745469] usbhid: USB HID core driver
  312. [ 3.753129] NET: Registered protocol family 10
  313. [ 3.767370] usb 1-2: New USB device found, idVendor=0424, idProduct=9730, bcdDevice= 1.00
  314. [ 3.769958] usb 1-2: New USB device strings: Mfr=0, Product=0, SerialNumber=0
  315. [ 3.785024] Segment Routing with IPv6
  316. [ 3.785135] mip6: Mobile IPv6
  317. [ 3.785996] NET: Registered protocol family 17
  318. [ 3.790635] Key type dns_resolver registered
  319. [ 3.795085] ThumbEE CPU extension supported.
  320. [ 3.798950] Registering SWP/SWPB emulation handler
  321. [ 3.803925] registered taskstats version 1
  322. [ 3.807809] Loading compiled-in X.509 certificates
  323. [ 3.812650] zswap: loaded using pool lzo/zbud
  324. [ 3.817260] Key type ._fscrypt registered
  325. [ 3.820910] Key type .fscrypt registered
  326. [ 3.824805] Key type fscrypt-provisioning registered
  327. [ 3.831281] Btrfs loaded, crc32c=crc32c-generic
  328. [ 3.855766] s3c-sdhci 12530000.sdhci: clock source 2: mmc_busclk.2 (50000000 Hz)
  329. [ 3.857578] s3c-sdhci 12530000.sdhci: Got CD GPIO
  330. [ 3.889037] mmc0: SDHCI controller on samsung-hsmmc [12530000.sdhci] using ADMA
  331. [ 3.891478] dwmmc_exynos 12550000.mmc: IDMAC supports 32-bit address mode.
  332. [ 3.897673] dwmmc_exynos 12550000.mmc: Using internal DMA controller.
  333. [ 3.904027] dwmmc_exynos 12550000.mmc: Version ID is 240a
  334. [ 3.906951] usb 1-3: new high-speed USB device number 3 using exynos-ehci
  335. [ 3.909407] dwmmc_exynos 12550000.mmc: DW MMC controller at irq 121,32 bit host data width,128 deep fifo
  336. [ 3.925848] dwmmc_exynos 12550000.mmc: allocated mmc-pwrseq
  337. [ 3.931177] mmc_host mmc1: card is polling.
  338. [ 3.948748] mmc_host mmc1: Bus speed (slot 0) = 50000000Hz (slot req 400000Hz, actual 396825HZ div = 63)
  339. [ 3.966551] input: gpio_keys as /devices/platform/gpio_keys/input/input0
  340. [ 4.007286] ALSA device list:
  341. [ 4.007331] No soundcards found.
  342. [ 4.009404] Freeing unused kernel memory: 2048K
  343. [ 4.012811] Run /init as init process
  344. :: running early hook [udev]
  345. [ 4.071369] usb 1-3: New USB device found, idVendor=0424, idProduct=3503, bcdDevice=a1.a0
  346. [ 4.073919] usb 1-3: New USB device strings: Mfr=0, Product=0, SerialNumber=0
  347. [ 4.081472] hub 1-3:1.0: USB hub found
  348. [ 4.085017] hub 1-3:1.0: 3 ports detected
  349. Starting version 245.6-4-arch
  350. :: running hook [udev]
  351. :: Triggering uevents...
  352. [ 4.290480] mmc_host mmc1: Bus speed (slot 0) = 50000000Hz (slot req 52000000Hz, actual 50000000HZ div = 0)
  353. [ 4.298031] mmc1: new DDR MMC card at address 0001
  354. [ 4.300008] mmcblk1: mmc1:0001 SDW32G 29.1 GiB
  355. [ 4.304222] mmcblk1boot0: mmc1:0001 SDW32G partition 1 4.00 MiB
  356. [ 4.310143] mmcblk1boot1: mmc1:0001 SDW32G partition 2 4.00 MiB
  357. [ 4.315862] mmcblk1rpmb: mmc1:0001 SDW32G partition 3 4.00 MiB, chardev (242:0)
  358. [ 4.339073] mmcblk1: p1
  359. :: performing fsck on '/dev/mmcblk1p1'
  360. rootfs: clean, 148902/1908736 files, 1846104/7632896 blocks
  361. :: mounting '/dev/mmcblk1p1' on real root
  362. [ 4.897732] EXT4-fs (mmcblk1p1): mounted filesystem with ordered data mode. Opts: (null)
  363. :: running cleanup hook [udev]
  364. [ 5.324344] x_tables: section 4 reloc 2 sym 'mutex_lock': relocation 28 out of range (0xbf0000bc -> 0xc101c154)
  365. [ 5.363701] systemd[1]: systemd 245.6-4-arch running in system mode. (+PAM +AUDIT -SELINUX -IMA -APPARMOR +SMACK -SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD +IDN2 -IDN +PCRE2 default-hierarchy=hybrid)
  366. [ 5.380586] systemd[1]: Detected architecture arm.
  367.  
  368. Welcome to Arch Linux ARM!
  369.  
  370. [ 5.425621] systemd[1]: Set hostname to <archl-u3et>.
  371. [ 5.887724] random: systemd: uninitialized urandom read (16 bytes read)
  372. [ 5.891735] systemd[1]: Created slice system-getty.slice.
  373. [ OK ] Created slice system-getty.slice.
  374. [ 5.915063] random: systemd: uninitialized urandom read (16 bytes read)
  375. [ 5.916905] systemd[1]: Created slice system-modprobe.slice.
  376. [ OK ] Created slice system-modprobe.slice.
  377. [ 5.943052] random: systemd: uninitialized urandom read (16 bytes read)
  378. [ 5.944881] systemd[1]: Created slice system-serial\x2dgetty.slice.
  379. [ OK ] Created slice system-serial\x2dgetty.slice.
  380. [ 5.971990] systemd[1]: Created slice User and Session Slice.
  381. [ OK ] Created slice User and Session Slice.
  382. [ 5.991255] systemd[1]: Started Dispatch Password Requests to Console Directory Watch.
  383. [ OK ] Started Dispatch Password ?ts to Console Directory Watch.
  384. [ 6.015204] systemd[1]: Started Forward Password Requests to Wall Directory Watch.
  385. [ OK ] Started Forward Password R?uests to Wall Directory Watch.
  386. [ 6.039626] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point.
  387. [ OK ] Set up automount Arbitrary?s File System Automount Point.
  388. [ 6.063134] systemd[1]: Reached target Local Encrypted Volumes.
  389. [ OK ] Reached target Local Encrypted Volumes.
  390. [ 6.083103] systemd[1]: Reached target Paths.
  391. [ OK ] Reached target Paths.
  392. [ 6.095045] systemd[1]: Reached target Remote File Systems.
  393. [ OK ] Reached target Remote File Systems.
  394. [ 6.115029] systemd[1]: Reached target Slices.
  395. [ OK ] Reached target Slices.
  396. [ 6.135071] systemd[1]: Reached target Swap.
  397. [ OK ] Reached target Swap.
  398. [ 6.147307] systemd[1]: Listening on Device-mapper event daemon FIFOs.
  399. [ OK ] Listening on Device-mapper event daemon FIFOs.
  400. [ 6.175278] systemd[1]: Listening on Process Core Dump Socket.
  401. [ OK ] Listening on Process Core Dump Socket.
  402. [ 6.195258] systemd[1]: Listening on initctl Compatibility Named Pipe.
  403. [ OK ] Listening on initctl Compatibility Named Pipe.
  404. [ 6.230887] systemd[1]: Condition check resulted in Journal Audit Socket being skipped.
  405. [ 6.233897] systemd[1]: Listening on Journal Socket (/dev/log).
  406. [ OK ] Listening on Journal Socket (/dev/log).
  407. [ 6.259458] systemd[1]: Listening on Journal Socket.
  408. [ OK ] Listening on Journal Socket.
  409. [ 6.279518] systemd[1]: Listening on Network Service Netlink Socket.
  410. [ OK ] Listening on Network Service Netlink Socket.
  411. [ 6.299395] systemd[1]: Listening on udev Control Socket.
  412. [ OK ] Listening on udev Control Socket.
  413. [ 6.319260] systemd[1]: Listening on udev Kernel Socket.
  414. [ OK ] Listening on udev Kernel Socket.
  415. [ 6.339359] systemd[1]: Condition check resulted in Huge Pages File System being skipped.
  416. [ 6.345249] systemd[1]: Mounting POSIX Message Queue File System...
  417. Mounting POSIX Message Queue File System...
  418. [ 6.370421] systemd[1]: Mounting Kernel Debug File System...
  419. Mounting Kernel Debug File System...
  420. [ 6.391333] systemd[1]: Condition check resulted in Kernel Trace File System being skipped.
  421. [ 6.403489] systemd[1]: Mounting Temporary Directory (/tmp)...
  422. Mounting Temporary Directory (/tmp)...
  423. [ 6.426611] systemd[1]: Starting Create list of static device nodes for the current kernel...
  424. Starting Create list of st?odes for the current kernel...
  425. [ 6.455148] systemd[1]: Condition check resulted in Load Kernel Module drm being skipped.
  426. [ 6.460904] systemd[1]: Condition check resulted in Set Up Additional Binary Formats being skipped.
  427. [ 6.470150] systemd[1]: Condition check resulted in Load Kernel Modules being skipped.
  428. [ 6.475027] systemd[1]: Condition check resulted in FUSE Control File System being skipped.
  429. [ 6.486159] systemd[1]: Mounting Kernel Configuration File System...
  430. Mounting Kernel Configuration File System...
  431. [ 6.514533] systemd[1]: Starting Remount Root and Kernel File Systems...
  432. Starting Remount Root and Kernel File Systems...
  433. [ 6.538620] systemd[1]: Starting Apply Kernel Variables...
  434. Starting Apply Kernel Variables...
  435. [ 6.562594] systemd[1]: Starting udev Coldplug all Devices...
  436. Starting udev Coldplug all Devices...
  437. [ 6.576631] sch_fq_codel: section 4 reloc 34 sym '_raw_spin_lock_bh': relocation 28 out of range (0xbf000a44 -> 0xc101e9dc)
  438. [ 6.599316] systemd[1]: Mounted POSIX Message Queue File System.
  439. [ OK ] Mounted POSIX Message Queue File System.
  440. [ 6.619746] systemd[1]: Mounted Kernel Debug File System.
  441. [ OK ] Mounted Kernel Debug File System.
  442. [ 6.639784] systemd[1]: Mounted Temporary Directory (/tmp).
  443. [ OK ] Mounted Temporary Directory (/tmp).
  444. [ 6.661012] systemd[1]: Finished Create list of static device nodes for the current kernel.
  445. [ OK ] Finished Create list of st? nodes for the current kernel.
  446. [ 6.688042] systemd[1]: Mounted Kernel Configuration File System.
  447. [ OK ] Mounted Kernel Configuration File System.
  448. [ 6.713005] systemd[1]: Finished Remount Root and Kernel File Systems.
  449. [ OK ] Finished Remount Root and Kernel File Systems.
  450. [ 6.737144] systemd[1]: Finished Apply Kernel Variables.
  451. [ OK ] Finished Apply Kernel Variables.
  452. [ 6.758191] systemd[1]: Condition check resulted in First Boot Wizard being skipped.
  453. [ 6.764045] systemd[1]: Condition check resulted in Rebuild Hardware Database being skipped.
  454. [ 6.772941] systemd[1]: Starting Load/Save Random Seed...
  455. Starting Load/Save Random Seed...
  456. [ 6.795233] systemd[1]: Condition check resulted in Create System Users being skipped.
  457. [ 6.801245] systemd[1]: Starting Create Static Device Nodes in /dev...
  458. Starting Create Static Device Nodes in /dev...
  459. [ 6.912670] systemd[1]: Finished Create Static Device Nodes in /dev.
  460. [ OK ] Finished Create Static Device Nodes in /dev.
  461. [ 6.939535] systemd[1]: Reached target Local File Systems (Pre).
  462. [ OK ] Reached target Local File Systems (Pre).
  463. [ 6.959228] systemd[1]: Condition check resulted in Virtual Machine and Container Storage (Compatibility) being skipped.
  464. [ 6.964795] systemd[1]: Reached target Local File Systems.
  465. [ OK ] Reached target Local File Systems.
  466. [ 6.995094] systemd[1]: Started Entropy Daemon based on the HAVEGE algorithm.
  467. [ OK ] Started Entropy Daemon based on the HAVEGE algorithm.
  468. [ 7.023325] systemd[1]: Condition check resulted in Rebuild Dynamic Linker Cache being skipped.
  469. [ 7.032659] systemd[1]: Starting Journal Service...
  470. Starting Journal Service...
  471. [ 7.047306] systemd[1]: Condition check resulted in Commit a transient machine-id on disk being skipped.
  472. [ 7.055192] systemd[1]: Starting udev Kernel Device Manager...
  473. Starting udev Kernel Device Manager...
  474. [ 7.077464] systemd[1]: Finished udev Coldplug all Devices.
  475. [ OK ] Finished udev Coldplug all Devices.
  476. [ 7.263529] systemd[1]: Started Journal Service.
  477. [ OK ] Started Journal Service.
  478. Starting Flush Journal to Persistent Storage...
  479. [ 7.323410] systemd-journald[277]: Received client request to flush runtime journal.
  480. [ OK ] Started udev Kernel Device Manager.
  481. Starting Network Service...
  482. [ OK ] Started Network Service.
  483. [ 8.123877] pwm_fan: section 4 reloc 14 sym 'mutex_lock': relocation 28 out of range (0xbf0091f8 -> 0xc101c154)
  484. [ 8.129206] uio: section 4 reloc 33 sym 'mutex_lock': relocation 28 out of range (0xbf012210 -> 0xc101c154)
  485. [ 8.157919] random: crng init done
  486. [ 8.157979] random: 7 urandom warning(s) missed due to ratelimiting
  487. [ 8.263034] snd_timer: section 4 reloc 2 sym '_raw_spin_lock_irqsave': relocation 28 out of range (0xbf0000d0 -> 0xc101e370)
  488. [ OK ] Finished Load/Save Random Seed.
  489. [ 8.307261] evdev: section 4 reloc 0 sym 'mutex_lock': relocation 28 out of range (0xbf00e088 -> 0xc101c154)
  490. [ 8.352730] s3c2410_wdt: section 4 reloc 0 sym '_raw_spin_lock': relocation 28 out of range (0xbf019010 -> 0xc101e98c)
  491. [ 8.354646] exynos-ppmu: new PPMU device registered 106a0000.ppmu_dmc0 (ppmu-event3-dmc0)
  492. [ 8.373407] exynos-ppmu: new PPMU device registered 106b0000.ppmu_dmc1 (ppmu-event3-dmc1)
  493. [ 8.376397] exynos-ppmu: new PPMU device registered 112a0000.ppmu_rightbus (ppmu-event3-rightbus)
  494. [ OK ] Finished Flush Journal to Persistent Storage exynos-ppmu: new PPMU device registered 116a0000.ppmu_leftbus0 (ppmu-event3-leftbus)
  495. [0m.
  496. Starting Create Volatile Files and Directories...
  497. [ 8.444800] s5p-secss 10830000.sss: s5p-sss driver registered
  498. [ 8.511746] videobuf2_common: section 4 reloc 0 sym '_raw_spin_lock_irqsave': relocation 28 out of range (0xbf000130 -> 0xc101e370)
  499. [ OK ] Finished Create Volatile Files and Directories.
  500. Starting Network Name Resolution...
  501. Starting Network Time Synchronization...
  502. Starting Update UTMP about System Boot/Shutdown...
  503. [ 8.593000] analogix_dp: section 4 reloc 113 sym 'mutex_lock': relocation 28 out of range (0xbf0118a0 -> 0xc101c154)
  504. [ OK ] Found device /dev/ttySAC1.
  505. [ OK ] Finished Update UTMP about System Boot/Shutdown.
  506. [ 8.744622] lima: section 4 reloc 160 sym 'usleep_range': relocation 28 out of range (0xbf00cf54 -> 0xc101d4e8)
  507. [ 8.755236] videobuf2_common: section 4 reloc 0 sym '_raw_spin_lock_irqsave': relocation 28 out of range (0xbf000130 -> 0xc101e370)
  508. [ 8.836156] exynos-mixer 12c10000.mixer: Adding to iommu group 0
  509. [ 8.862550] OF: graph: no port node found in /soc/hdmi@12d00000
  510. [ 8.897912] [drm] Exynos DRM: using 12c10000.mixer device for DMA mapping operations
  511. [ 8.900196] exynos-drm exynos-drm: bound 12c10000.mixer (ops mixer_component_ops [exynosdrm])
  512. [ 8.903408] smsc95xx: section 4 reloc 21 sym '_raw_spin_lock_irqsave': relocation 28 out of range (0xbf00c29c -> 0xc101e370)
  513. [ 8.954561] exynos-bus: new bus device registered: soc:bus_dmc (100000 KHz ~ 400000 KHz)
  514. [ 8.957728] exynos-bus: new bus device registered: soc:bus_acp (100000 KHz ~ 267000 KHz)
  515. [ 8.968315] exynos-bus: new bus device registered: soc:bus_c2c (100000 KHz ~ 400000 KHz)
  516. [ 8.983446] exynos-drm exynos-drm: bound 12d00000.hdmi (ops hdmi_component_ops [exynosdrm])
  517. [ 8.986189] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
  518. [ 8.993745] exynos-drm exynos-drm: [drm] Cannot find any crtc or sizes
  519. [ 8.999513] exynos-drm exynos-drm: [drm] Cannot find any crtc or sizes
  520. [ 9.007980] [drm] Initialized exynos 1.1.0 20180330 for exynos-drm on minor 0
  521. [ 9.009529] exynos-bus: new bus device registered: soc:bus_leftbus (100000 KHz ~ 200000 KHz)
  522. [ 9.024415] exynos-bus: new bus device registered: soc:bus_rightbus (100000 KHz ~ 200000 KHz)
  523. [ 9.032043] exynos-bus: new bus device registered: soc:bus_display (160000 KHz ~ 200000 KHz)
  524. [ 9.039565] snd_soc_idma: section 4 reloc 0 sym '_raw_spin_lock': relocation 28 out of range (0xbf013030 -> 0xc101e98c)
  525. [ 9.052831] exynos-bus: new bus device registered: soc:bus_fsys (100000 KHz ~ 134000 KHz)
  526. [ 9.058010] exynos-bus: new bus device registered: soc:bus_peri ( 50000 KHz ~ 100000 KHz)
  527. [ 9.065757] exynos-bus: new bus device registered: soc:bus_mfc (100000 KHz ~ 200000 KHz)
  528. [ OK ] Started Network Time Synchronization.
  529. [ OK ] Reached target System Initialization.
  530. [ OK ] Started Daily Cleanup of Temporary Directories.
  531. [ OK ] Reached target System Time Set.
  532. [ OK ] Reached target System Time Synchronized.
  533. [ OK ] Started Daily verification of password and group files.
  534. [ OK ] Reached target Timers.
  535. [ OK ] Listening on D-Bus System Message Bus Socket videobuf2_common: section 4 reloc 0 sym '_raw_spin_lock_irqsave': relocation 28 out of range (0xbf000130 -> 0xc101e370)
  536. [0m.
  537. [ OK ] Reached target Sockets.
  538. [ OK ] Reached target Basic System.
  539. [ OK ] Started D-Bus System Message Bus.
  540. Starting Login Service...
  541. [ 9.396332] snd_soc_hdmi_codec: section 4 reloc 24 sym 'mutex_lock': relocation 28 out of range (0xbf0163e0 -> 0xc101c154)
  542. [ OK ] Started Network Name Resolution.
  543. [ OK ] Reached target Network.
  544. [ OK ] Reached target Host and Network Name Lookups.
  545. [ OK ] Started OpenSSH Daemon.
  546. Starting Permit User Sessions...
  547. [ OK ] Finished Permit User Sessions.
  548. [ OK ] Started Login Service.
  549. Starting Light Display Manager...
  550. [ OK ] Started Serial Getty on ttySAC1.
  551. [ OK ] Reached target Login Prompts.
  552. [ OK ] Reached target Multi-User System.
  553. [ OK ] Started Light Display Manager.
  554. [ OK ] Reached target Graphical Interface.
  555.  
  556. Arch Linux 5.7.1-1-ARCH (ttySAC1)
  557.  
  558. archl-u3et login: alarm
  559. Password:
  560. Last login: Thu Jun 11 04:55:35 on ttySAC1
  561. [alarm@archl-u3et ~]$ ifconfig
  562. lo: flags=73<UP,LOOPBACK,RUNNING> mtu 65536
  563. inet 127.0.0.1 netmask 255.0.0.0
  564. inet6 ::1 prefixlen 128 scopeid 0x10<host>
  565. loop txqueuelen 1000 (Local Loopback)
  566. RX packets 0 bytes 0 (0.0 B)
  567. RX errors 0 dropped 0 overruns 0 frame 0
  568. TX packets 0 bytes 0 (0.0 B)
  569. TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0
  570.  
  571. [alarm@archl-u3et ~]$
RAW Paste Data