Not a member of Pastebin yet?
Sign Up,
it unlocks many cool features!
- mps.language = {}
- mps.language["EN"] = {
- printerBase = "Printer Base",
- storageSmall = "Storage Small",
- storageMedium = "Storage Medium",
- storageLarge = "Storage Large",
- keypad = "Keypad",
- armor = "Armor",
- armorLight = "Armor Light",
- safeLarge = "Safe Large",
- safe = "Safe",
- silencer = "Silencer",
- booster = "Booster",
- paper = "Paper",
- printHead1 = "Print Head Low Quality",
- printHead2 = "Print Head Medium Quality",
- printHead3 = "Print Head High Quality",
- printHeadD = "Donator Print Head",
- storage1 = "Small Storage",
- storage2 = "Medium Storage",
- storage3 = "Large Storage",
- tray3 = "Large Paper Tray",
- tray2 = "Medium Paper Tray",
- tray1 = "Small Paper Tray",
- indicator = "Indicator",
- token = "Donator Token",
- antenna = "Antenna",
- tools = "Tools",
- software = "Software",
- noTray = "No paper tray installed.",
- noPrinthead = "No printhead installed.",
- noStorage = "No storage installed.",
- noPaper = "No paper in tray.",
- storageLimit = "Storage limit reached. Withdraw first.",
- decoRemoved = "Decoration removed. Money returned: ",
- upgRemoved = " removed. Money returned: ",
- moneyWithdrawed = "Money withdrawed: ",
- moneyReceived = "Money received via antenna transfer: ",
- bonusMoney = "Withdraw bonus: ",
- printerOperationFail = "You are not the owner. This incident will be noted.",
- printerOperationFailInfo = "Someone tried to use your printer.",
- moneyWithdrawCooldown = "You can't withdraw money when keypad is on cooldown.",
- keypadRemoveFail = "You can't remove keypad on cooldown.",
- detectorShipment = "Detector shipment",
- detectorOwned = "You already own printer detector.",
- UI_turnOff = "TURN OFF",
- UI_turnOn = "TURN ON",
- UI_menu = "MENU",
- UI_withdraw = "WITHDRAW",
- UI_storage1 = "STORAGE 1",
- UI_storage2 = "STORAGE 2",
- UI_storage3 = "STORAGE 3",
- UI_noStorage = "NO STORAGE",
- UI_printHead1 = "PRINTHEAD 1",
- UI_printHead2 = "PRINTHEAD 2",
- UI_printHead3 = "PRINTHEAD 3",
- UI_printHeadD = "PRINTHEAD D",
- UI_noPrinthead = "NO PRINTHEAD",
- UI_paperTray1 = "PAPER TRAY 1",
- UI_paperTray2 = "PAPER TRAY 2",
- UI_paperTray3 = "PAPER TRAY 3",
- UI_noPapertray = "NO PAPER TRAY",
- UI_armor1 = "ARMOR 1",
- UI_armor2 = "ARMOR 2",
- UI_armor3 = "ARMOR 3",
- UI_noArmor = "NO ARMOR",
- UI_keypad = "KEYPAD",
- UI_noKeypad = "NO KEYPAD",
- UI_decoration = "DECORATION",
- UI_noDecoration = "NO DECO.",
- UI_back = "back",
- UI_turnOff_corr = 0,
- UI_turnOn_corr = 0,
- UI_menu_corr = 0,
- UI_withdraw_corr = 0,
- UI_back_corr = 0,
- UI_font_corr = 48,
- TOOL_title = "Argon Config Tool",
- TOOL_save = "Save",
- TOOL_onlyNumbers = "Insert only numbers!",
- TOOL_configSaved = "Config saved. Restart recommended.",
- TOOL_lowEnd = "Low-end (",
- TOOL_midEnd = "Mid-end (",
- TOOL_highEnd = "High-end (",
- TOOL_willProduce = "will produce:",
- TOOL_perMinute = "per minute",
- TOOL_perHour = "per hour",
- TOOL_calculate = "Calculate",
- TOOL_disclaimer1 = "If you have any questions please",
- TOOL_disclaimer2 = "send me a message on Gmodstore.",
- TOOL_disclaimer3 = "If there are any issues please post",
- TOOL_disclaimer4 = "support ticket.",
- TOOL_disclaimer5 = "Thanks and have fun!",
- DET_readyTo = "ready to",
- DET_scan = "scan",
- DET_waiting = "waiting",
- DET_searching = "searching",
- DET_printers = "printers",
- DET_pleaseWait = "please wait",
- DET_printer = "printer",
- DET_found = "found",
- DET_no = "no",
- DET_results = "results",
- DET_tryAgain = "try again",
- DET_reloading = "reloading",
- DET_scanner = "scanner",
- onlyUpgraded = "You can only use Token when printer is equipped.",
- }
- mps.language["DE"] = {
- printerBase = "Gelddrucker",
- storageSmall = "Kleiner Vorrat",
- storageMedium = "Mittlerer Vorrat",
- storageLarge = "Grosser Vorrat",
- keypad = "Tastenfeld",
- armor = "Schutz",
- armorLight = "Leichter Schutz",
- safeLarge = "Grosser Tresor",
- safe = "Tresor",
- silencer = "Schalldaempfer",
- booster = "Verstaerker",
- paper = "Papier",
- printHead1 = "Druckerpatrone (Schlechte Qualitaet)",
- printHead2 = "Druckerpatrone (Mittlere Qualitaet)",
- printHead3 = "Druckerpatrone (Hochwertige Qualitaet)",
- printHeadD = "Druckerpatrone (Donator)",
- storage1 = "Kleiner Vorrat",
- storage2 = "Mittlerer Vorrat",
- storage3 = "Grosser Vorrat",
- tray3 = "Grosses Papierfach",
- tray2 = "Mittleres Papierfach",
- tray1 = "Kleines Papierfach",
- indicator = "Indikator",
- token = "Donator Token",
- antenna = "Antenne",
- tools = "Werkzeuge",
- software = "Software",
- noTray = "Es wurde kein Papierfach installiert.",
- noPrinthead = "Es wurde keine Patrone installiert.",
- noStorage = "Es wurde kein Vorrat installiert.",
- noPaper = "Es befindet sich kein Papier im Papierfach.",
- storageLimit = "Vorrat Limit erreicht. Heb zuerst dein Geld ab.",
- decoRemoved = "Dekoration wurde entfernt. Storniertes Geld erhalten: ",
- upgRemoved = " Entfernt. Storniertes Geld erhalten: ",
- moneyWithdrawed = "Geld abgehoben: ",
- moneyReceived = "Geld per Antenne erhalten: ",
- bonusMoney = "Bonus abgehoben: ",
- printerOperationFail = "Du bist nicht der Besitzer. Dieser Vorgang wird notiert.",
- printerOperationFailInfo = "Jemand hantiert an deinem Gelddrucker herum.",
- moneyWithdrawCooldown = "Du kannst bei der Abk�hlzeit von dem Tastenfeld kein Geld abheben.",
- keypadRemoveFail = "Du kannst das Tastenfeld bei der Abk�hlzeit nicht entfernen.",
- detectorShipment = "Detektor Shipment",
- detectorOwned = "Du besitzt bereits einen Printer Detektor.",
- UI_turnOff = "ANSCHALTEN",
- UI_turnOn = "AUSSCHALTEN",
- UI_menu = "WEITERES",
- UI_withdraw = "ABHEBEN",
- UI_storage1 = "VORRAT ST.1",
- UI_storage2 = "VORRAT ST.2",
- UI_storage3 = "VORRAT ST.3",
- UI_noStorage = "KEIN VORRAT.",
- UI_printHead1 = "PATRONE ST.1",
- UI_printHead2 = "PATRONE ST.2",
- UI_printHead3 = "PATRONE ST.3",
- UI_printHeadD = "PATRONE ST.D",
- UI_noPrinthead = "KEINE PATRONE.",
- UI_paperTray1 = "PAPIERFACH 1",
- UI_paperTray2 = "PAPIERFACH 2",
- UI_paperTray3 = "PAPIERFACH 3",
- UI_noPapertray = "KEIN PAPIER.",
- UI_armor1 = "SCHUTZ ST.1",
- UI_armor2 = "SCHUTZ ST.2",
- UI_armor3 = "SCHUTZ ST.3",
- UI_noArmor = "KEIN SCHUTZ.",
- UI_keypad = "TASTENFELD",
- UI_noKeypad = "KEIN TASTENF.",
- UI_decoration = "DEKORATION",
- UI_noDecoration = "KEINE DEKO.",
- UI_back = "ZURUECK",
- UI_turnOff_corr = 120,
- UI_turnOn_corr = 190,
- UI_menu_corr = 150,
- UI_withdraw_corr = -40,
- UI_back_corr = 95,
- UI_font_corr = 48,
- TOOL_title = "Argon Config Tool",
- TOOL_save = "Save",
- TOOL_onlyNumbers = "Insert only numbers!",
- TOOL_configSaved = "Config saved. Restart recommended.",
- TOOL_lowEnd = "Low-end (",
- TOOL_midEnd = "Mid-end (",
- TOOL_highEnd = "High-end (",
- TOOL_willProduce = "will produce:",
- TOOL_perMinute = "per minute",
- TOOL_perHour = "per hour",
- TOOL_calculate = "Calculate",
- TOOL_disclaimer1 = "If you have any questions please",
- TOOL_disclaimer2 = "send me a message on Gmodstore.",
- TOOL_disclaimer3 = "If there are any issues please post",
- TOOL_disclaimer4 = "support ticket.",
- TOOL_disclaimer5 = "Thanks and have fun!",
- DET_readyTo = "ready to",
- DET_scan = "scan",
- DET_waiting = "waiting",
- DET_searching = "searching",
- DET_printers = "printers",
- DET_pleaseWait = "please wait",
- DET_printer = "printer",
- DET_found = "found",
- DET_no = "no",
- DET_results = "results",
- DET_tryAgain = "try again",
- DET_reloading = "reloading",
- DET_scanner = "scanner",
- onlyUpgraded = "You can only use Token when printer is equipped.",
- }
- mps.language["FR"] = {
- printerBase = "Imprimante de base",
- storageSmall = "Petit stockage",
- storageMedium = "Moyen stockage",
- storageLarge = "Grand stockage",
- keypad = "Clavier",
- armor = "Armure",
- armorLight = "Armure légère",
- safeLarge = "Grande Sécurité",
- safe = "Sécurité",
- silencer = "Silencieux",
- booster = "Booster",
- paper = "Papier",
- printHead1 = "Tête d'impression basse qualité",
- printHead2 = "Tête d'impression moyenne qualité",
- printHead3 = "Tête d'impression haute qualité",
- printHeadD = "Tête d'impression de donneur",
- storage1 = "Petit stockage",
- storage2 = "Moyen stockage",
- storage3 = "Grand stockage",
- tray3 = "Grand bac à papier",
- tray2 = "Moyen bac à papier",
- tray1 = "Petit bac à papier",
- indicator = "Indicateur",
- token = "Jeton de donateur",
- antenna = "Antenne",
- tools = "Outils",
- software = "Logiciel",
- noTray = "Aucun bac à papier installé.",
- noPrinthead = "Aucune tête d'impression installée.",
- noStorage = "Pas de stockage installé.",
- noPaper = "Pas de papier dans le bac.",
- storageLimit = "Limite de stockage atteinte. Retirer d'abord.",
- decoRemoved = "Décoration enlevée. Argent retourné : ",
- upgRemoved = " enlevé. Argent retourné : ",
- moneyWithdrawed = "Argent retiré : ",
- moneyReceived = "Argent reçu par transfert d'antenne : ",
- bonusMoney = "Retirer le bonus : ",
- printerOperationFail = "Vous n'êtes pas le propriétaire. Cet incident sera noté.",
- printerOperationFailInfo = "Quelqu'un a essayer d'utiliser votre imprimante.",
- moneyWithdrawCooldown = "Vous ne pouvez pas retirer de l'argent lorsque le clavier lors du temps de recharge.",
- keypadRemoveFail = "Vous ne pouvez pas supprimer le clavier lors du temps de recharge.",
- detectorShipment = "Envoi détecteur",
- detectorOwned = "Vous possédez déjà un détecteur d'imprimante.",
- UI_turnOff = "ETEINDRE",
- UI_turnOn = "ALLUMER",
- UI_menu = "MENU",
- UI_withdraw = "RETIRER",
- UI_storage1 = "STOCKAGE 1",
- UI_storage2 = "STOCKAGE 2",
- UI_storage3 = "STOCKAGE 3",
- UI_noStorage = "PAS DE STOCKAGE",
- UI_printHead1 = "TETE D'IMPRESSION 1",
- UI_printHead2 = "TETE D'IMPRESSION 2",
- UI_printHead3 = "TETE D'IMPRESSION 3",
- UI_printHeadD = "TETE D'IMPRESSION D",
- UI_noPrinthead = "PAS DE TETE D'IMPR.",
- UI_paperTray1 = "BAC A PAPIER 1",
- UI_paperTray2 = "BAC A PAPIER 2",
- UI_paperTray3 = "BAC A PAPIER 3",
- UI_noPapertray = "PAS DE BAC A PAPIER",
- UI_armor1 = "ARMURE 1",
- UI_armor2 = "ARMURE 2",
- UI_armor3 = "ARMURE 3",
- UI_noArmor = "PAS D'ARMURE",
- UI_keypad = "CLAVIER",
- UI_noKeypad = "PAS DE CLAVIER",
- UI_decoration = "DECORATION",
- UI_noDecoration = "PAS DE DECO",
- UI_back = "retour",
- UI_turnOff_corr = 30,
- UI_turnOn_corr = 20,
- UI_menu_corr = 0,
- UI_withdraw_corr = -50,
- UI_back_corr = 0,
- UI_font_corr = 32,
- TOOL_title = "Argon outil de config",
- TOOL_save = "Sauvegarder",
- TOOL_onlyNumbers = "Ne mettre que des nombres !",
- TOOL_configSaved = "Config sauvegardée. Reboot recommandé.",
- TOOL_lowEnd = "Bas de gamme (",
- TOOL_midEnd = "Milieu de gamme (",
- TOOL_highEnd = "Haut de gamme (",
- TOOL_willProduce = "va produire:",
- TOOL_perMinute = "par minute",
- TOOL_perHour = "par heure",
- TOOL_calculate = "Calculer",
- TOOL_disclaimer1 = "Si vous avez une question,",
- TOOL_disclaimer2 = "envoyer moi un message sur gmodsotre",
- TOOL_disclaimer3 = "S'il y a des problèmes s'il vous plaît poster",
- TOOL_disclaimer4 = "un ticket au support",
- TOOL_disclaimer5 = "Merci et bon jeu !",
- DET_readyTo = "Prêt",
- DET_scan = "scan",
- DET_waiting = "attendre",
- DET_searching = "recherche",
- DET_printers = "imprimantes",
- DET_pleaseWait = "attendez",
- DET_printer = "imprimante",
- DET_found = "a trouvé",
- DET_no = "non",
- DET_results = "résultats",
- DET_tryAgain = "essayer encore",
- DET_reloading = "rechargement",
- DET_scanner = "scanner",
- onlyUpgraded = "Vous ne pouvez utiliser Token que si l'imprimante en est équipée.",
- }
- mps.language["PL"] = {
- printerBase = "Baza drukarki",
- storageSmall = "Mały Schowek",
- storageMedium = "Średni Schowek",
- storageLarge = "Duży Schowek",
- keypad = "Keypad",
- armor = "Pancerz",
- armorLight = "Lekki Pancerz",
- safeLarge = "Duży Sejf",
- safe = "Sejf",
- silencer = "Tłumik",
- booster = "Booster",
- paper = "Papier",
- printHead1 = "Głowica Niskiej Jakości",
- printHead2 = "Głowica Średniej Jakości",
- printHead3 = "Głowica Wysokiej Jakości",
- printHeadD = "Głowica Darczyńcy",
- storage1 = "Mały Schowek",
- storage2 = "Średni Schowek",
- storage3 = "Duży Schowek",
- tray3 = "Duża taca na papier",
- tray2 = "Średnia taca na papier",
- tray1 = "Mała taca na papier",
- indicator = "Wskaźnik",
- token = "Moneta darczyńcy",
- antenna = "Antena",
- tools = "Narzędzia",
- software = "Oprogramowanie",
- noTray = "Brak tacy na papier.",
- noPrinthead = "Brak głowicy.",
- noStorage = "Brak schowka.",
- noPaper = "Brak papieru.",
- storageLimit = "Osiągnięto limit schowka. Prosze wypłacić.",
- decoRemoved = "Usunięto dekoracje. Zwrócono pieniądze: ",
- upgRemoved = " usunięto. Zwrócono pieniądze: ",
- moneyWithdrawed = "Wypłacono: ",
- moneyReceived = "Otrzymano pieniądze z transferu: ",
- bonusMoney = "Bonus przy wypłacie: ",
- printerOperationFail = "Nie masz uprawnień. Właściciel zostanie poinformowany.",
- printerOperationFailInfo = "Ktoś próbował użyć twojej drukarki.",
- moneyWithdrawCooldown = "Nie możesz wypłacać podczas cooldownu.",
- keypadRemoveFail = "Nie możesz usunąć keypada podczas cooldownu.",
- detectorShipment = "Paczka detektorów",
- detectorOwned = "Już posiadasz detektor.",
- UI_turnOff = "WYŁĄCZ",
- UI_turnOn = "WŁĄCZ",
- UI_menu = "MENU",
- UI_withdraw = "WYPŁAĆ",
- UI_storage1 = "SCHOWEK 1",
- UI_storage2 = "SCHOWEK 2",
- UI_storage3 = "SCHOWEK 3",
- UI_noStorage = "BRAK SCHOWKA",
- UI_printHead1 = "GŁOWICA 1",
- UI_printHead2 = "GŁOWICA 2",
- UI_printHead3 = "GŁOWICA 3",
- UI_printHeadD = "GŁOWICA D",
- UI_noPrinthead = "BRAK GŁOWICY",
- UI_paperTray1 = "TACA 1",
- UI_paperTray2 = "TACA 2",
- UI_paperTray3 = "TACA 3",
- UI_noPapertray = "BRAK TACY",
- UI_armor1 = "PANCERZ 1",
- UI_armor2 = "PANCERZ 2",
- UI_armor3 = "PANCERZ 3",
- UI_noArmor = "BRAK PANCERZA",
- UI_keypad = "KEYPAD",
- UI_noKeypad = "BRAK KEYPADA",
- UI_decoration = "DEKORACJA",
- UI_noDecoration = "BRAK DEKO.",
- UI_back = "wstecz",
- UI_turnOff_corr = -70,
- UI_turnOn_corr = -70,
- UI_menu_corr = 0,
- UI_withdraw_corr = -100,
- UI_back_corr = 60,
- UI_font_corr = 48,
- TOOL_title = "Argon: Ustawienia",
- TOOL_save = "Zapisz",
- TOOL_onlyNumbers = "Użyj tylko cyfr!",
- TOOL_configSaved = "Config zapisany. Restart zalecany!",
- TOOL_lowEnd = "Tani (",
- TOOL_midEnd = "Średni (",
- TOOL_highEnd = "Drogi (",
- TOOL_willProduce = "wydrukuje:",
- TOOL_perMinute = "na minute",
- TOOL_perHour = "na godzine",
- TOOL_calculate = "Oblicz",
- TOOL_disclaimer1 = "Jeśli masz jakieś pytanie",
- TOOL_disclaimer2 = "proszę o wiadomość na Gmodstore.",
- TOOL_disclaimer3 = "Jeśli napotkasz problemy proszę",
- TOOL_disclaimer4 = "otwórz ticket.",
- TOOL_disclaimer5 = "Dziękuje, miłej zabawy!",
- DET_readyTo = "gotowy do",
- DET_scan = "skanowania",
- DET_waiting = "czekam",
- DET_searching = "szukam",
- DET_printers = "drukarek",
- DET_pleaseWait = "czekaj",
- DET_printer = "drukarka",
- DET_found = "znaleziona",
- DET_no = "brak",
- DET_results = "wyników",
- DET_tryAgain = "",
- DET_reloading = "przeładowanie",
- DET_scanner = "skanera",
- onlyUpgraded = "Możesz użyć tokena tylko gry printer jest wyposażony.",
- }
- mps.language["CN"] = {
- printerBase = "印钞机底座",
- storageSmall = "小型存储",
- storageMedium = "中型存储",
- storageLarge = "大型存储",
- keypad = "键盘",
- armor = "护甲",
- armorLight = "轻型护甲",
- safeLarge = "大型保险柜",
- safe = "保险柜",
- silencer = "消音器",
- booster = "加速器",
- paper = "纸",
- printHead1 = "打印头低质量",
- printHead2 = "打印头中等质量",
- printHead3 = "打印头高等质量",
- printHeadD = "赞助专用打印头",
- storage1 = "小型存储",
- storage2 = "中型存储",
- storage3 = "大型存储",
- tray3 = "大型纸盘",
- tray2 = "中型纸盘",
- tray1 = "小型纸盘",
- indicator = "指针",
- token = "赞助代币",
- antenna = "天线",
- tools = "工具",
- software = "软件",
- noTray = "没有安装纸盘.",
- noPrinthead = "没有安装打印头.",
- noStorage = "没有安装存储.",
- noPaper = "没有在纸盘里放纸.",
- storageLimit = "达到存储限制,请先取钱.",
- decoRemoved = "装饰品已移除. 归还金钱: ",
- upgRemoved = " 已移除. 归还金钱: ",
- moneyWithdrawed = "已取钱: ",
- moneyReceived = "通过天线收到了金钱: ",
- bonusMoney = "取钱额外奖励: ",
- printerOperationFail = "你不是主人.他将注意到这一事件.",
- printerOperationFailInfo = "有人试图使用你的印钞机.",
- moneyWithdrawCooldown = "键盘处于冷却状态时,您无法取款。",
- keypadRemoveFail = "您无法在冷却时移除键盘.",
- detectorShipment = "探测器货物",
- detectorOwned = "你已经拥有印钞机探测器.",
- UI_turnOff = "关闭",
- UI_turnOn = "开启",
- UI_menu = "彩蛋",
- UI_withdraw = "取钱",
- UI_storage1 = "存储 1",
- UI_storage2 = "存储 2",
- UI_storage3 = "存储 3",
- UI_noStorage = "无存储",
- UI_printHead1 = "打印头 1",
- UI_printHead2 = "打印头 2",
- UI_printHead3 = "打印头 3",
- UI_printHeadD = "打印头 D",
- UI_noPrinthead = "无打印头",
- UI_paperTray1 = "纸盘 1",
- UI_paperTray2 = "纸盘 2",
- UI_paperTray3 = "纸盘 3",
- UI_noPapertray = "无纸盘",
- UI_armor1 = "护甲 1",
- UI_armor2 = "护甲 2",
- UI_armor3 = "护甲 3",
- UI_noArmor = "无护甲",
- UI_keypad = "键盘",
- UI_noKeypad = "无键盘",
- UI_decoration = "装饰品",
- UI_noDecoration = "无装饰品.",
- UI_back = "返回",
- UI_turnOff_corr = 0,
- UI_turnOn_corr = 0,
- UI_menu_corr = 0,
- UI_withdraw_corr = 0,
- UI_back_corr = 0,
- UI_font_corr = 48,
- TOOL_title = "Argon设置工具",
- TOOL_save = "保存",
- TOOL_onlyNumbers = "仅输入数字!",
- TOOL_configSaved = "配置已保存.建议重启.",
- TOOL_lowEnd = "低端 (",
- TOOL_midEnd = "中端 (",
- TOOL_highEnd = "高端 (",
- TOOL_willProduce = "将生产:",
- TOOL_perMinute = "每分钟",
- TOOL_perHour = "每小时",
- TOOL_calculate = "计算",
- TOOL_disclaimer1 = "如果您有任何疑问,请",
- TOOL_disclaimer2 = "在Gmodstore上给我发消息.",
- TOOL_disclaimer3 = "如果有任何问题请发帖",
- TOOL_disclaimer4 = "support ticket.",
- TOOL_disclaimer5 = "谢谢,玩得开心!",
- DET_readyTo = "准备",
- DET_scan = "检查",
- DET_waiting = "等待中",
- DET_searching = "搜索中",
- DET_printers = "印钞机",
- DET_pleaseWait = "请稍等",
- DET_printer = "印钞机",
- DET_found = "发现",
- DET_no = "无",
- DET_results = "结果",
- DET_tryAgain = "请重试",
- DET_reloading = "重装",
- DET_scanner = "检测器",
- onlyUpgraded = "您只能在装备印钞机时使用代币.",
- }
Add Comment
Please, Sign In to add comment