Advertisement
Not a member of Pastebin yet?
Sign Up,
it unlocks many cool features!
- In: serial@ff1a0000
- Out: serial@ff1a0000
- Err: serial@ff1a0000
- Model: Pine64 RockPro64
- normal boot
- Net: eth0: ethernet@fe300000
- Hit any key to stop autoboot: 0
- Card did not respond to voltage select!
- mmc_init: -95, time 19
- switch to partitions #0, OK
- mmc1 is current device
- Scanning mmc 1:7...
- Found /boot/extlinux/extlinux.conf
- Retrieving file: /boot/extlinux/extlinux.conf
- 2001 bytes read in 18 ms (108.4 KiB/s)
- select kernel
- 1: kernel-4.20.0-rc6-1075-ayufan-g6b3dd2a83c96
- 2: kernel-4.20.0-rc6-1075-ayufan-g6b3dd2a83c96-memtest
- 3: kernel-4.4.154-1124-rockchip-ayufan-ged3ce4d15ec1
- 4: kernel-4.4.154-1124-rockchip-ayufan-ged3ce4d15ec1-memtest
- Enter choice: 1: kernel-4.20.0-rc6-1075-ayufan-g6b3dd2a83c96
- Retrieving file: /boot/initrd.img-4.20.0-rc6-1075-ayufan-g6b3dd2a83c96
- 5675941 bytes read in 625 ms (8.7 MiB/s)
- Retrieving file: /boot/vmlinuz-4.20.0-rc6-1075-ayufan-g6b3dd2a83c96
- 29532672 bytes read in 3145 ms (9 MiB/s)
- append: rw panic=10 init=/sbin/init coherent_pool=1M ethaddr=aa:41:29:23:dc:d1 eth1addr= serial=b180dcc95b790fb cgroup_enab4
- Retrieving file: /boot/dtbs/4.20.0-rc6-1075-ayufan-g6b3dd2a83c96/rockchip/rk3399-rockpro64.dtb
- 56314 bytes read in 72 ms (763.7 KiB/s)
- ## Flattened Device Tree blob at 01f00000
- Booting using the fdt blob at 0x1f00000
- Loading Ramdisk to f599a000, end f5f03ba5 ... OK
- Loading Device Tree to 00000000f5989000, end 00000000f5999bf9 ... OK
- Starting kernel ...
- [ 0.000000] Booting Linux on physical CPU 0x0000000000 [0x410fd034]
- [ 0.000000] Linux version 4.20.0-rc6-1075-ayufan-g6b3dd2a83c96 (root@runner-f725ff63-project-6422644-concurrent-0) (gcc 8
- [ 0.000000] Machine model: Pine64 RockPro64
- [ 0.000000] earlycon: uart8250 at MMIO32 0x00000000ff1a0000 (options '')
- [ 0.000000] printk: bootconsole [uart8250] enabled
- [ 0.000000] efi: Getting EFI parameters from FDT:
- [ 0.000000] efi: UEFI not found.
- [ 0.000000] cma: Reserved 16 MiB at 0x00000000f7000000
- [ 0.000000] NUMA: No NUMA configuration found
- [ 0.000000] NUMA: Faking a node at [mem 0x0000000000200000-0x00000000f7ffffff]
- [ 0.000000] NUMA: NODE_DATA [mem 0xf6fa3840-0xf6fa4fff]
- [ 0.000000] Zone ranges:
- [ 0.000000] DMA32 [mem 0x0000000000200000-0x00000000f7ffffff]
- [ 0.000000] Normal empty
- [ 0.000000] Movable zone start for each node
- [ 0.000000] Early memory node ranges
- [ 0.000000] node 0: [mem 0x0000000000200000-0x00000000f7ffffff]
- [ 0.000000] Initmem setup node 0 [mem 0x0000000000200000-0x00000000f7ffffff]
- [ 0.000000] psci: probing for conduit method from DT.
- [ 0.000000] psci: PSCIv1.0 detected in firmware.
- [ 0.000000] psci: Using standard PSCI v0.2 function IDs
- [ 0.000000] psci: MIGRATE_INFO_TYPE not supported.
- [ 0.000000] psci: SMC Calling Convention v1.0
- [ 0.000000] random: get_random_bytes called from start_kernel+0xa8/0x418 with crng_init=0
- [ 0.000000] percpu: Embedded 23 pages/cpu @(____ptrval____) s55896 r8192 d30120 u94208
- [ 0.000000] Detected VIPT I-cache on CPU0
- [ 0.000000] CPU features: enabling workaround for ARM erratum 845719
- [ 0.000000] CPU features: detected: Kernel page table isolation (KPTI)
- [ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 999432
- [ 0.000000] Policy zone: DMA32
- [ 0.000000] Kernel command line: earlycon=uart8250,mmio32,0xff1a0000 rw panic=10 init=/sbin/init coherent_pool=1M ethadd4
- [ 0.000000] Memory: 3942912K/4061184K available (17980K kernel code, 1896K rwdata, 7372K rodata, 1536K init, 480K bss, 1)
- [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=6, Nodes=1
- [ 0.000000] rcu: Preemptible hierarchical RCU implementation.
- [ 0.000000] rcu: RCU restricting CPUs from NR_CPUS=64 to nr_cpu_ids=6.
- [ 0.000000] Tasks RCU enabled.
- [ 0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 25 jiffies.
- [ 0.000000] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=6
- [ 0.000000] NR_IRQS: 64, nr_irqs: 64, preallocated irqs: 0
- [ 0.000000] GICv3: GIC: Using split EOI/Deactivate mode
- [ 0.000000] GICv3: Distributor has no Range Selector support
- [ 0.000000] GICv3: no VLPI support, no direct LPI support
- [ 0.000000] GICv3: CPU0: found redistributor 0 region 0:0x00000000fef00000
- [ 0.000000] ITS [mem 0xfee20000-0xfee3ffff]
- [ 0.000000] ITS@0x00000000fee20000: allocated 65536 Devices @f6880000 (flat, esz 8, psz 64K, shr 0)
- [ 0.000000] ITS: using cache flushing for cmd queue
- [ 0.000000] GICv3: using LPI property table @0x00000000f6840000
- [ 0.000000] GIC: using cache flushing for LPI property table
- [ 0.000000] GICv3: CPU0: using allocated LPI pending table @0x00000000f6850000
- [ 0.000000] GICv3: GIC: PPI partition interrupt-partition-0[0] { /cpus/cpu@0[0] /cpus/cpu@1[1] /cpus/cpu@2[2] /cpus/cpu@}
- [ 0.000000] GICv3: GIC: PPI partition interrupt-partition-1[1] { /cpus/cpu@100[4] /cpus/cpu@101[5] }
- [ 0.000000] rockchip_mmc_get_phase: invalid clk rate
- [ 0.000000] rockchip_mmc_get_phase: invalid clk rate
- [ 0.000000] rockchip_mmc_get_phase: invalid clk rate
- [ 0.000000] rockchip_mmc_get_phase: invalid clk rate
- [ 0.000000] arch_timer: cp15 timer(s) running at 24.00MHz (phys).
- [ 0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x588fe9dc0, max_idle_ns: 440795202592 ns
- [ 0.000006] sched_clock: 56 bits at 24MHz, resolution 41ns, wraps every 4398046511097ns
- [ 0.003023] Console: colour dummy device 80x25
- [ 0.003448] printk: console [tty0] enabled
- [ 0.003845] printk: bootconsole [uart8250] disabled
- [ 0.000000] Booting Linux on physical CPU 0x0000000000 [0x410fd034]
- [ 0.000000] Linux version 4.20.0-rc6-1075-ayufan-g6b3dd2a83c96 (root@runner-f725ff63-project-6422644-concurrent-0) (gcc 8
- [ 0.000000] Machine model: Pine64 RockPro64
- [ 0.000000] earlycon: uart8250 at MMIO32 0x00000000ff1a0000 (options '')
- [ 0.000000] printk: bootconsole [uart8250] enabled
- [ 0.000000] efi: Getting EFI parameters from FDT:
- [ 0.000000] efi: UEFI not found.
- [ 0.000000] cma: Reserved 16 MiB at 0x00000000f7000000
- [ 0.000000] NUMA: No NUMA configuration found
- [ 0.000000] NUMA: Faking a node at [mem 0x0000000000200000-0x00000000f7ffffff]
- [ 0.000000] NUMA: NODE_DATA [mem 0xf6fa3840-0xf6fa4fff]
- [ 0.000000] Zone ranges:
- [ 0.000000] DMA32 [mem 0x0000000000200000-0x00000000f7ffffff]
- [ 0.000000] Normal empty
- [ 0.000000] Movable zone start for each node
- [ 0.000000] Early memory node ranges
- [ 0.000000] node 0: [mem 0x0000000000200000-0x00000000f7ffffff]
- [ 0.000000] Initmem setup node 0 [mem 0x0000000000200000-0x00000000f7ffffff]
- [ 0.000000] psci: probing for conduit method from DT.
- [ 0.000000] psci: PSCIv1.0 detected in firmware.
- [ 0.000000] psci: Using standard PSCI v0.2 function IDs
- [ 0.000000] psci: MIGRATE_INFO_TYPE not supported.
- [ 0.000000] psci: SMC Calling Convention v1.0
- [ 0.000000] random: get_random_bytes called from start_kernel+0xa8/0x418 with crng_init=0
- [ 0.000000] percpu: Embedded 23 pages/cpu @(____ptrval____) s55896 r8192 d30120 u94208
- [ 0.000000] Detected VIPT I-cache on CPU0
- [ 0.000000] CPU features: enabling workaround for ARM erratum 845719
- [ 0.000000] CPU features: detected: Kernel page table isolation (KPTI)
- [ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 999432
- [ 0.000000] Policy zone: DMA32
- [ 0.000000] Kernel command line: earlycon=uart8250,mmio32,0xff1a0000 rw panic=10 init=/sbin/init coherent_pool=1M ethadd4
- [ 0.000000] Memory: 3942912K/4061184K available (17980K kernel code, 1896K rwdata, 7372K rodata, 1536K init, 480K bss, 1)
- [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=6, Nodes=1
- [ 0.000000] rcu: Preemptible hierarchical RCU implementation.
- [ 0.000000] rcu: RCU restricting CPUs from NR_CPUS=64 to nr_cpu_ids=6.
- [ 0.000000] Tasks RCU enabled.
- [ 0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 25 jiffies.
- [ 0.000000] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=6
- [ 0.000000] NR_IRQS: 64, nr_irqs: 64, preallocated irqs: 0
- [ 0.000000] GICv3: GIC: Using split EOI/Deactivate mode
- [ 0.000000] GICv3: Distributor has no Range Selector support
- [ 0.000000] GICv3: no VLPI support, no direct LPI support
- [ 0.000000] GICv3: CPU0: found redistributor 0 region 0:0x00000000fef00000
- [ 0.000000] ITS [mem 0xfee20000-0xfee3ffff]
- [ 0.000000] ITS@0x00000000fee20000: allocated 65536 Devices @f6880000 (flat, esz 8, psz 64K, shr 0)
- [ 0.000000] ITS: using cache flushing for cmd queue
- [ 0.000000] GICv3: using LPI property table @0x00000000f6840000
- [ 0.000000] GIC: using cache flushing for LPI property table
- [ 0.000000] GICv3: CPU0: using allocated LPI pending table @0x00000000f6850000
- [ 0.000000] GICv3: GIC: PPI partition interrupt-partition-0[0] { /cpus/cpu@0[0] /cpus/cpu@1[1] /cpus/cpu@2[2] /cpus/cpu@}
- [ 0.000000] GICv3: GIC: PPI partition interrupt-partition-1[1] { /cpus/cpu@100[4] /cpus/cpu@101[5] }
- [ 0.000000] rockchip_mmc_get_phase: invalid clk rate
- [ 0.000000] rockchip_mmc_get_phase: invalid clk rate
- [ 0.000000] rockchip_mmc_get_phase: invalid clk rate
- [ 0.000000] rockchip_mmc_get_phase: invalid clk rate
- [ 0.000000] arch_timer: cp15 timer(s) running at 24.00MHz (phys).
- [ 0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x588fe9dc0, max_idle_ns: 440795202592 ns
- [ 0.000006] sched_clock: 56 bits at 24MHz, resolution 41ns, wraps every 4398046511097ns
- [ 0.003023] Console: colour dummy device 80x25
- [ 0.003448] printk: console [tty0] enabled
- [ 0.003845] printk: bootconsole [uart8250] disabled
- [ 0.004412] Calibrating delay loop (skipped), value calculated using timer frequency.. 48.00 BogoMIPS (lpj=96000)
- [ 0.004447] pid_max: default: 32768 minimum: 301
- [ 0.004582] LSM: Security Framework initializing
- [ 0.006653] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes)
- [ 0.007709] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes)
- [ 0.007796] Mount-cache hash table entries: 8192 (order: 4, 65536 bytes)
- [ 0.007851] Mountpoint-cache hash table entries: 8192 (order: 4, 65536 bytes)
- [ 0.031091] ASID allocator initialised with 32768 entries
- [ 0.039090] rcu: Hierarchical SRCU implementation.
- [ 0.047225] Platform MSI: interrupt-controller@fee20000 domain created
- [ 0.047678] PCI/MSI: /interrupt-controller@fee00000/interrupt-controller@fee20000 domain created
- [ 0.052427] EFI services will not be available.
- [ 0.060330] smp: Bringing up secondary CPUs ...
- [ 0.092541] Detected VIPT I-cache on CPU1
- [ 0.092578] GICv3: CPU1: found redistributor 1 region 0:0x00000000fef20000
- [ 0.092593] GICv3: CPU1: using allocated LPI pending table @0x00000000f6860000
- [ 0.092638] CPU1: Booted secondary processor 0x0000000001 [0x410fd034]
- [ 0.124623] Detected VIPT I-cache on CPU2
- [ 0.124652] GICv3: CPU2: found redistributor 2 region 0:0x00000000fef40000
- [ 0.124664] GICv3: CPU2: using allocated LPI pending table @0x00000000f6870000
- [ 0.124695] CPU2: Booted secondary processor 0x0000000002 [0x410fd034]
- [ 0.156720] Detected VIPT I-cache on CPU3
- [ 0.156747] GICv3: CPU3: found redistributor 3 region 0:0x00000000fef60000
- [ 0.156760] GICv3: CPU3: using allocated LPI pending table @0x00000000f6900000
- [ 0.156789] CPU3: Booted secondary processor 0x0000000003 [0x410fd034]
- [ 0.191417] CPU features: enabling workaround for EL2 vector hardening
- [ 0.191935] Detected PIPT I-cache on CPU4
- [ 0.193136] GICv3: CPU4: found redistributor 100 region 0:0x00000000fef80000
- [ 0.193585] GICv3: CPU4: using allocated LPI pending table @0x00000000f6910000
- [ 0.194764] CPU4: Booted secondary processor 0x0000000100 [0x410fd082]
- [ 0.230998] Detected PIPT I-cache on CPU5
- [ 0.232140] GICv3: CPU5: found redistributor 101 region 0:0x00000000fefa0000
- [ 0.232555] GICv3: CPU5: using allocated LPI pending table @0x00000000f6920000
- [ 0.233608] CPU5: Booted secondary processor 0x0000000101 [0x410fd082]
- [ 0.237411] smp: Brought up 1 node, 6 CPUs
- [ 0.237813] SMP: Total of 6 processors activated.
- [ 0.237852] CPU features: detected: GIC system register CPU interface
- [ 0.237880] CPU features: detected: 32-bit EL0 Support
- [ 0.237913] CPU features: detected: CRC32 instructions
- [ 0.260437] CPU: All CPU(s) started at EL2
- [ 0.260933] alternatives: patching kernel code
- [ 0.265305] devtmpfs: initialized
- [ 0.283578] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns
- [ 0.283790] futex hash table entries: 2048 (order: 5, 131072 bytes)
- [ 0.285110] xor: measuring software checksum speed
- [ 0.323467] 8regs : 1158.000 MB/sec
- [ 0.363671] 8regs_prefetch: 1029.000 MB/sec
- [ 0.403893] 32regs : 1421.000 MB/sec
- [ 0.444105] 32regs_prefetch: 1200.000 MB/sec
- [ 0.444129] xor: using function: 32regs (1421.000 MB/sec)
- [ 0.444164] pinctrl core: initialized pinctrl subsystem
- [ 0.448538] DMI not present or invalid.
- [ 0.449761] NET: Registered protocol family 16
- [ 0.454308] audit: initializing netlink subsys (disabled)
- [ 0.454925] audit: type=2000 audit(0.444:1): state=initialized audit_enabled=0 res=1
- [ 0.461799] cpuidle: using governor menu
- [ 0.463564] vdso: 2 pages (1 code @ (____ptrval____), 1 data @ (____ptrval____))
- [ 0.463639] hw-breakpoint: found 6 breakpoint and 4 watchpoint registers.
- [ 0.475619] DMA: preallocated 1024 KiB pool for atomic allocations
- [ 0.479657] Serial: AMBA PL011 UART driver
- [ 0.614320] HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages
- [ 0.616111] cryptd: max_cpu_qlen set to 1000
- [ 0.683264] raid6: int64x1 gen() 217 MB/s
- [ 0.751323] raid6: int64x1 xor() 220 MB/s
- [ 0.819543] raid6: int64x2 gen() 339 MB/s
- [ 0.888032] raid6: int64x2 xor() 302 MB/s
- [ 0.956392] raid6: int64x4 gen() 518 MB/s
- [ 1.024831] raid6: int64x4 xor() 381 MB/s
- [ 1.093329] raid6: int64x8 gen() 491 MB/s
- [ 1.161692] raid6: int64x8 xor() 375 MB/s
- [ 1.230197] raid6: neonx1 gen() 363 MB/s
- [ 1.298503] raid6: neonx1 xor() 425 MB/s
- [ 1.366944] raid6: neonx2 gen() 581 MB/s
- [ 1.435301] raid6: neonx2 xor() 603 MB/s
- [ 1.503764] raid6: neonx4 gen() 753 MB/s
- [ 1.572184] raid6: neonx4 xor() 721 MB/s
- [ 1.640598] raid6: neonx8 gen() 826 MB/s
- [ 1.708973] raid6: neonx8 xor() 767 MB/s
- [ 1.708993] raid6: using algorithm neonx8 gen() 826 MB/s
- [ 1.709012] raid6: .... xor() 767 MB/s, rmw enabled
- [ 1.709031] raid6: using neon recovery algorithm
- [ 1.711200] ACPI: Interpreter disabled.
- [ 1.714098] vcc3v3_pcie: supplied by dc_12v
- [ 1.716725] vcc_sys: supplied by dc_12v
- [ 1.720572] vgaarb: loaded
- [ 1.721820] SCSI subsystem initialized
- [ 1.726420] usbcore: registered new interface driver usbfs
- [ 1.726573] usbcore: registered new interface driver hub
- [ 1.727060] usbcore: registered new device driver usb
- [ 1.729890] media: Linux media interface: v0.10
- [ 1.730058] videodev: Linux video capture interface: v2.00
- [ 1.730490] pps_core: LinuxPPS API ver. 1 registered
- [ 1.730514] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
- [ 1.730703] PTP clock support registered
- [ 1.734034] Advanced Linux Sound Architecture Driver Initialized.
- [ 1.735186] Bluetooth: Core ver 2.22
- [ 1.735452] NET: Registered protocol family 31
- [ 1.735479] Bluetooth: HCI device and connection manager initialized
- [ 1.735509] Bluetooth: HCI socket layer initialized
- [ 1.735537] Bluetooth: L2CAP socket layer initialized
- [ 1.735605] Bluetooth: SCO socket layer initialized
- [ 1.735660] NetLabel: Initializing
- [ 1.735678] NetLabel: domain hash size = 128
- [ 1.735694] NetLabel: protocols = UNLABELED CIPSOv4 CALIPSO
- [ 1.735808] NetLabel: unlabeled traffic allowed by default
- [ 1.738672] clocksource: Switched to clocksource arch_sys_counter
- [ 1.739480] VFS: Disk quotas dquot_6.6.0
- [ 1.739598] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
- [ 1.739935] pnp: PnP ACPI: disabled
- [ 1.758323] NET: Registered protocol family 2
- [ 1.764040] tcp_listen_portaddr_hash hash table entries: 2048 (order: 3, 32768 bytes)
- [ 1.764343] TCP established hash table entries: 32768 (order: 6, 262144 bytes)
- [ 1.765022] TCP bind hash table entries: 32768 (order: 7, 524288 bytes)
- [ 1.765978] TCP: Hash tables configured (established 32768 bind 32768)
- [ 1.767179] UDP hash table entries: 2048 (order: 4, 65536 bytes)
- [ 1.767485] UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes)
- [ 1.768007] NET: Registered protocol family 1
- [ 1.771078] RPC: Registered named UNIX socket transport module.
- [ 1.771115] RPC: Registered udp transport module.
- [ 1.771134] RPC: Registered tcp transport module.
- [ 1.771152] RPC: Registered tcp NFSv4.1 backchannel transport module.
- [ 1.773658] Trying to unpack rootfs image as initramfs...
- [ 2.224289] Freeing initrd memory: 5540K
- [ 2.233223] hw perfevents: enabled with armv8_cortex_a53 PMU driver, 7 counters available
- [ 2.236924] hw perfevents: enabled with armv8_cortex_a72 PMU driver, 7 counters available
- [ 2.237952] kvm [1]: 8-bit VMID
- [ 2.237979] kvm [1]: IPA Size Limit: 40bits
- [ 2.239753] kvm [1]: vgic-v2@fff20000
- [ 2.240103] kvm [1]: GIC system register CPU interface enabled
- [ 2.242392] kvm [1]: vgic interrupt IRQ10
- [ 2.245915] kvm [1]: Hyp mode initialized successfully
- [ 2.518212] workingset: timestamp_bits=44 max_order=20 bucket_order=0
- [ 2.536899] squashfs: version 4.0 (2009/01/31) Phillip Lougher
- [ 2.539968] NFS: Registering the id_resolver key type
- [ 2.540102] Key type id_resolver registered
- [ 2.540122] Key type id_legacy registered
- [ 2.540151] nfs4filelayout_init: NFSv4 File Layout Driver Registering...
- [ 2.540178] Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
- [ 2.542128] fuse init (API version 7.28)
- [ 2.543785] 9p: Installing v9fs 9p2000 file system support
- [ 4.131713] NET: Registered protocol family 38
- [ 4.149296] Key type asymmetric registered
- [ 4.149361] Asymmetric key parser 'x509' registered
- [ 4.149586] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 245)
- [ 4.151240] io scheduler noop registered
- [ 4.151664] io scheduler cfq registered (default)
- [ 4.151689] io scheduler mq-deadline registered
- [ 4.151709] io scheduler kyber registered
- [ 4.163085] vcc5v0_host: supplied by vcc_sys
- [ 4.163439] phy phy-ff770000.syscon:usb2-phy@e450.1: Linked as a consumer to regulator.6
- [ 4.169145] phy phy-ff770000.syscon:usb2-phy@e460.3: Linked as a consumer to regulator.6
- [ 4.228706] dma-pl330 ff6d0000.dma-controller: Loaded driver for PL330 DMAC-241330
- [ 4.228808] dma-pl330 ff6d0000.dma-controller: DBUFF-32x8bytes Num_Chans-6 Num_Peri-12 Num_Events-12
- [ 4.235068] dma-pl330 ff6e0000.dma-controller: Loaded driver for PL330 DMAC-241330
- [ 4.235152] dma-pl330 ff6e0000.dma-controller: DBUFF-128x8bytes Num_Chans-8 Num_Peri-20 Num_Events-16
- [ 4.245614] pwm-regulator: supplied by vcc_sys
- [ 4.246205] vcc3v3_sys: supplied by vcc_sys
- [ 4.246327] vcc5v0_typec: supplied by vcc_sys
- [ 4.258328] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
- [ 4.262411] ff180000.serial: ttyS0 at MMIO 0xff180000 (irq = 37, base_baud = 1500000) is a 16550A
- [ 4.264901] ff1a0000.serial: ttyS2 at MMIO 0xff1a0000 (irq = 38, base_baud = 1500000) is a 16550A
- [ 4.381017] printk: console [ttyS2] enabled
- [ 4.384361] SuperH (H)SCI(F) driver initialized
- [ 4.386162] msm_serial: driver initialized
- [ 4.411263] cacheinfo: Unable to detect cache hierarchy for CPU 0
- [ 4.438923] brd: module loaded
- [ 4.455248] loop: module loaded
- [ 4.500175] rockchip-spi ff1d0000.spi: Failed to request TX DMA channel
- [ 4.500818] rockchip-spi ff1d0000.spi: Failed to request RX DMA channel
- [ 4.504859] m25p80 spi0.0: gd25q128 (16384 Kbytes)
- [ 4.517202] 3 fixed-partitions partitions found on MTD device spi0.0
- [ 4.517809] Creating 3 MTD partitions on "spi0.0":
- [ 4.518257] 0x000000000000-0x0000003f8000 : "loader"
- [ 4.522169] 0x0000003f8000-0x000000400000 : "env"
- [ 4.525048] 0x0000007c0000-0x000000800000 : "vendor"
- [ 4.533243] libphy: Fixed MDIO Bus: probed
- [ 4.535977] tun: Universal TUN/TAP device driver, 1.6
- [ 4.541899] e1000e: Intel(R) PRO/1000 Network Driver - 3.2.6-k
- [ 4.543759] e1000e: Copyright(c) 1999 - 2015 Intel Corporation.
- [ 4.544548] igb: Intel(R) Gigabit Ethernet Network Driver - version 5.4.0-k
- [ 4.545194] igb: Copyright (c) 2007-2014 Intel Corporation.
- [ 4.545797] igbvf: Intel(R) Gigabit Virtual Function Network Driver - version 2.4.0-k
- [ 4.546834] igbvf: Copyright (c) 2009 - 2012 Intel Corporation.
- [ 4.548629] sky2: driver version 1.30
- [ 4.552454] rk_gmac-dwmac fe300000.ethernet: PTP uses main clock
- [ 4.553326] rk_gmac-dwmac fe300000.ethernet: Linked as a consumer to regulator.4
- [ 4.554003] rk_gmac-dwmac fe300000.ethernet: clock input or output? (input).
- [ 4.554747] rk_gmac-dwmac fe300000.ethernet: TX delay(0x28).
- [ 4.555266] rk_gmac-dwmac fe300000.ethernet: RX delay(0x20).
- [ 4.555786] rk_gmac-dwmac fe300000.ethernet: integrated PHY? (no).
- [ 4.556416] rk_gmac-dwmac fe300000.ethernet: cannot get clock clk_mac_speed
- [ 4.557046] rk_gmac-dwmac fe300000.ethernet: clock input from PHY
- [ 4.562609] rk_gmac-dwmac fe300000.ethernet: init for RGMII
- [ 4.564583] rk_gmac-dwmac fe300000.ethernet: User ID: 0x10, Synopsys ID: 0x35
- [ 4.565233] rk_gmac-dwmac fe300000.ethernet: DWMAC1000
- [ 4.565713] rk_gmac-dwmac fe300000.ethernet: DMA HW capability register supported
- [ 4.566390] rk_gmac-dwmac fe300000.ethernet: RX Checksum Offload Engine supported
- [ 4.567140] rk_gmac-dwmac fe300000.ethernet: COE Type 2
- [ 4.567616] rk_gmac-dwmac fe300000.ethernet: TX Checksum insertion supported
- [ 4.568252] rk_gmac-dwmac fe300000.ethernet: Wake-Up On Lan supported
- [ 4.568884] rk_gmac-dwmac fe300000.ethernet: Normal descriptors
- [ 4.569423] rk_gmac-dwmac fe300000.ethernet: Ring mode enabled
- [ 4.569955] rk_gmac-dwmac fe300000.ethernet: Enable RX Mitigation via HW Watchdog Timer
- [ 4.733699] libphy: stmmac: probed
- [ 4.734077] RTL8211F Gigabit Ethernet stmmac-0:00: attached PHY driver [RTL8211F Gigabit Ethernet] (mii_bus:phy_addr=stm)
- [ 4.735231] RTL8211F Gigabit Ethernet stmmac-0:01: attached PHY driver [RTL8211F Gigabit Ethernet] (mii_bus:phy_addr=stm)
- [ 4.740494] pegasus: v0.9.3 (2013/04/25), Pegasus/Pegasus II USB Ethernet driver
- [ 4.741320] usbcore: registered new interface driver pegasus
- [ 4.741902] usbcore: registered new interface driver rtl8150
- [ 4.742813] usbcore: registered new interface driver r8152
- [ 4.743383] usbcore: registered new interface driver asix
- [ 4.743931] usbcore: registered new interface driver ax88179_178a
- [ 4.744541] usbcore: registered new interface driver cdc_ether
- [ 4.745136] usbcore: registered new interface driver dm9601
- [ 4.745706] usbcore: registered new interface driver CoreChips
- [ 4.746305] usbcore: registered new interface driver smsc75xx
- [ 4.747169] usbcore: registered new interface driver smsc95xx
- [ 4.747762] usbcore: registered new interface driver net1080
- [ 4.748330] usbcore: registered new interface driver plusb
- [ 4.748917] usbcore: registered new interface driver cdc_subset
- [ 4.749516] usbcore: registered new interface driver MOSCHIP usb-ethernet driver
- [ 4.750285] usbcore: registered new interface driver cdc_ncm
- [ 4.751488] VFIO - User Level meta-driver version: 0.3
- [ 4.756621] dwc3 fe800000.dwc3: Failed to get clk 'ref': -2
- [ 4.773489] OF: graph: no port node found in /syscon@ff770000/usb2-phy@e450/otg-port
- [ 4.780109] dwc3 fe900000.dwc3: Failed to get clk 'ref': -2
- [ 4.791311] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
- [ 4.791937] ehci-pci: EHCI PCI platform driver
- [ 4.792513] ehci-platform: EHCI generic platform driver
- [ 4.795595] ehci-platform fe380000.usb: EHCI Host Controller
- [ 4.796167] ehci-platform fe380000.usb: new USB bus registered, assigned bus number 1
- [ 4.798975] ehci-platform fe380000.usb: irq 30, io mem 0xfe380000
- [ 4.818541] ehci-platform fe380000.usb: USB 2.0 started, EHCI 1.00
- [ 4.820755] hub 1-0:1.0: USB hub found
- [ 4.821145] hub 1-0:1.0: 1 port detected
- [ 4.825083] ehci-platform fe3c0000.usb: EHCI Host Controller
- [ 4.825627] ehci-platform fe3c0000.usb: new USB bus registered, assigned bus number 2
- [ 4.829435] ehci-platform fe3c0000.usb: irq 32, io mem 0xfe3c0000
- [ 4.846536] ehci-platform fe3c0000.usb: USB 2.0 started, EHCI 1.00
- [ 4.848359] hub 2-0:1.0: USB hub found
- [ 4.848765] hub 2-0:1.0: 1 port detected
- [ 4.850117] ehci-orion: EHCI orion driver
- [ 4.851311] ehci-exynos: EHCI EXYNOS driver
- [ 4.851990] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
- [ 4.852708] ohci-pci: OHCI PCI platform driver
- [ 4.853277] ohci-platform: OHCI generic platform driver
- [ 4.854159] ohci-platform fe3a0000.usb: Generic Platform OHCI controller
- [ 4.854854] ohci-platform fe3a0000.usb: new USB bus registered, assigned bus number 3
- [ 4.858130] ohci-platform fe3a0000.usb: irq 31, io mem 0xfe3a0000
- [ 4.924864] hub 3-0:1.0: USB hub found
- [ 4.925258] hub 3-0:1.0: 1 port detected
- [ 4.926861] ohci-platform fe3e0000.usb: Generic Platform OHCI controller
- [ 4.927523] ohci-platform fe3e0000.usb: new USB bus registered, assigned bus number 4
- [ 4.929436] ohci-platform fe3e0000.usb: irq 33, io mem 0xfe3e0000
- [ 4.991732] hub 4-0:1.0: USB hub found
- [ 4.992120] hub 4-0:1.0: 1 port detected
- [ 4.993487] ohci-exynos: OHCI EXYNOS driver
- [ 4.995798] xhci-hcd xhci-hcd.0.auto: xHCI Host Controller
- [ 4.996336] xhci-hcd xhci-hcd.0.auto: new USB bus registered, assigned bus number 5
- [ 4.999747] xhci-hcd xhci-hcd.0.auto: hcc params 0x0220fe64 hci version 0x110 quirks 0x0000000002010010
- [ 5.000661] xhci-hcd xhci-hcd.0.auto: irq 219, io mem 0xfe800000
- [ 5.003130] hub 5-0:1.0: USB hub found
- [ 5.003530] hub 5-0:1.0: 1 port detected
- [ 5.004573] xhci-hcd xhci-hcd.0.auto: xHCI Host Controller
- [ 5.005088] xhci-hcd xhci-hcd.0.auto: new USB bus registered, assigned bus number 6
- [ 5.005793] xhci-hcd xhci-hcd.0.auto: Host supports USB 3.0 SuperSpeed
- [ 5.006757] usb usb6: We don't know the algorithms for LPM for this host, disabling LPM.
- [ 5.008558] hub 6-0:1.0: USB hub found
- [ 5.008963] hub 6-0:1.0: 1 port detected
- [ 5.010203] xhci-hcd xhci-hcd.1.auto: xHCI Host Controller
- [ 5.010883] xhci-hcd xhci-hcd.1.auto: new USB bus registered, assigned bus number 7
- [ 5.014012] xhci-hcd xhci-hcd.1.auto: hcc params 0x0220fe64 hci version 0x110 quirks 0x0000000002010010
- [ 5.015128] xhci-hcd xhci-hcd.1.auto: irq 220, io mem 0xfe900000
- [ 5.017564] hub 7-0:1.0: USB hub found
- [ 5.017982] hub 7-0:1.0: 1 port detected
- [ 5.019105] xhci-hcd xhci-hcd.1.auto: xHCI Host Controller
- [ 5.019622] xhci-hcd xhci-hcd.1.auto: new USB bus registered, assigned bus number 8
- [ 5.020331] xhci-hcd xhci-hcd.1.auto: Host supports USB 3.0 SuperSpeed
- [ 5.021023] usb usb8: We don't know the algorithms for LPM for this host, disabling LPM.
- [ 5.023052] hub 8-0:1.0: USB hub found
- [ 5.023458] hub 8-0:1.0: 1 port detected
- [ 5.025368] usbcore: registered new interface driver usb-storage
- [ 5.036057] i2c /dev entries driver
- [ 5.046041] rk808 0-001b: chip id: 0x0
- [ 5.052449] rk808-regulator rk808-regulator: there is no dvs0 gpio
- [ 5.053088] rk808-regulator rk808-regulator: there is no dvs1 gpio
- [ 5.053737] DCDC_REG1: supplied by vcc_sys
- [ 5.055535] DCDC_REG2: supplied by vcc_sys
- [ 5.056514] DCDC_REG3: supplied by vcc_sys
- [ 5.057272] DCDC_REG4: supplied by vcc_sys
- [ 5.058193] LDO_REG1: supplied by vcc_sys
- [ 5.059886] LDO_REG2: supplied by vcc_sys
- [ 5.061427] LDO_REG3: supplied by vcc_sys
- [ 5.062917] LDO_REG4: supplied by vcc_sys
- [ 5.063491] vcc_sdio: Bringing 3300000uV into 3000000-3000000uV
- [ 5.065208] LDO_REG5: supplied by vcc_sys
- [ 5.067382] LDO_REG6: supplied by vcc_sys
- [ 5.068919] LDO_REG7: supplied by vcc_sys
- [ 5.070291] LDO_REG8: supplied by vcc_sys
- [ 5.071918] SWITCH_REG1: supplied by vcc3v3_sys
- [ 5.072664] SWITCH_REG2: supplied by vcc3v3_sys
- [ 5.078008] rk808-rtc rk808-rtc: registered as rtc0
- [ 5.079722] fan53555-regulator 0-0040: FAN53555 Option[8] Rev[1] Detected!
- [ 5.080399] fan53555-reg: supplied by vcc_sys
- [ 5.082132] vcc1v8_s3: supplied by vcc_1v8
- [ 5.083545] fan53555-regulator 0-0041: FAN53555 Option[9] Rev[7] Detected!
- [ 5.084193] fan53555-reg: supplied by vcc_sys
- [ 5.093580] rockchip-rga ff680000.rga: HW Version: 0x03.02
- [ 5.098781] rockchip-rga ff680000.rga: Registered rockchip-rga as /dev/video0
- [ 5.101133] rockchip-iodomain ff320000.syscon:io-domains: Linked as a consumer to regulator.21
- [ 5.102312] rockchip-iodomain ff770000.syscon:io-domains: Linked as a consumer to regulator.14
- [ 5.103366] rockchip-iodomain ff770000.syscon:io-domains: Linked as a consumer to regulator.20
- [ 5.104256] rockchip-iodomain ff770000.syscon:io-domains: Linked as a consumer to regulator.17
- [ 5.105114] rockchip-iodomain ff770000.syscon:io-domains: Linked as a consumer to regulator.21
- [ 5.116841] Bluetooth: HCI UART driver ver 2.3
- [ 5.119426] cpu cpu0: Linked as a consumer to regulator.11
- [ 5.120086] cpu cpu0: Dropping the link to regulator.11
- [ 5.120878] cpu cpu0: Linked as a consumer to regulator.11
- [ 5.123624] cpu cpu4: Linked as a consumer to regulator.24
- [ 5.124707] cpufreq: cpufreq_online: CPU4: Running at unlisted freq: 12000 KHz
- [ 5.125926] cpufreq: cpufreq_online: CPU4: Unlisted initial frequency changed to: 408000 KHz
- [ 5.128423] sdhci: Secure Digital Host Controller Interface driver
- [ 5.128981] sdhci: Copyright(c) Pierre Ossman
- [ 5.129659] Synopsys Designware Multimedia Card Interface Driver
- [ 5.131463] dwmmc_rockchip fe320000.dwmmc: IDMAC supports 32-bit address mode.
- [ 5.132396] dwmmc_rockchip fe320000.dwmmc: Using internal DMA controller.
- [ 5.133003] dwmmc_rockchip fe320000.dwmmc: Version ID is 270a
- [ 5.133558] dwmmc_rockchip fe320000.dwmmc: DW MMC controller at irq 28,32 bit host data width,256 deep fifo
- [ 5.134567] dwmmc_rockchip fe320000.dwmmc: Linked as a consumer to regulator.17
- [ 5.135265] dwmmc_rockchip fe320000.dwmmc: Got CD GPIO
- [ 5.135853] vcc_sdio: unsupportable voltage range: 3300000-3000000uV
- [ 5.146588] random: fast init done
- [ 5.146840] mmc_host mmc0: Bus speed (slot 0) = 400000Hz (slot req 400000Hz, actual 400000HZ div = 0)
- [ 5.162990] sdhci-pltfm: SDHCI platform and OF driver helper
- [ 5.165884] mmc1: CQHCI version 5.10
- [ 5.189986] mmc1: SDHCI controller on fe330000.sdhci [fe330000.sdhci] using ADMA
- [ 5.196071] ledtrig-cpu: registered to indicate activity on CPUs
- [ 5.199024] usbcore: registered new interface driver usbhid
- [ 5.199544] usbhid: USB HID core driver
- [ 5.203044] rockchip-saradc ff100000.saradc: Linked as a consumer to regulator.2
- [ 5.211772] xt_time: kernel timezone is -0000
- [ 5.212203] IPVS: Registered protocols (TCP, UDP, SCTP, AH, ESP)
- [ 5.212987] IPVS: Connection hash table configured (size=4096, memory=64Kbytes)
- [ 5.213812] IPVS: ipvs loaded.
- [ 5.214089] IPVS: [rr] scheduler registered.
- [ 5.214515] IPVS: [wrr] scheduler registered.
- [ 5.214913] IPVS: [lc] scheduler registered.
- [ 5.215301] IPVS: [wlc] scheduler registered.
- [ 5.215687] IPVS: [fo] scheduler registered.
- [ 5.216078] IPVS: [ovf] scheduler registered.
- [ 5.216481] IPVS: [lblc] scheduler registered.
- [ 5.216880] IPVS: [lblcr] scheduler registered.
- [ 5.217291] IPVS: [dh] scheduler registered.
- [ 5.217679] IPVS: [sh] scheduler registered.
- [ 5.218073] IPVS: [sed] scheduler registered.
- [ 5.218467] IPVS: [nq] scheduler registered.
- [ 5.219096] ipt_CLUSTERIP: ClusterIP Version 0.8 loaded successfully
- [ 5.219721] Initializing XFRM netlink socket
- [ 5.220516] NET: Registered protocol family 10
- [ 5.221540] Segment Routing with IPv6
- [ 5.222093] sit: IPv6, IPv4 and MPLS over IPv4 tunneling driver
- [ 5.223016] NET: Registered protocol family 17
- [ 5.223489] bridge: filtering via arp/ip/ip6tables is no longer available by default. Update your scripts to load br_net.
- [ 5.224708] Bluetooth: HIDP (Human Interface Emulation) ver 1.2
- [ 5.225237] Bluetooth: HIDP socket layer initialized
- [ 5.225707] 8021q: 802.1Q VLAN Support v1.8
- [ 5.226254] 9pnet: Installing 9P2000 support
- [ 5.226695] Key type dns_resolver registered
- [ 5.227824] registered taskstats version 1
- [ 5.228990] Btrfs loaded, crc32c=crc32c-generic
- [ 5.244156] mmc_host mmc0: Bus speed (slot 0) = 148500000Hz (slot req 150000000Hz, actual 148500000HZ div = 0)
- [ 5.251322] rk808-rtc rk808-rtc: setting system clock to 2018-12-11 18:35:01 UTC (1544553301)
- [ 5.252106] of_cfs_init
- [ 5.252415] of_cfs_init: OK
- [ 5.253033] platform regulatory.0: Direct firmware load for regulatory.db failed with error -2
- [ 5.253793] cfg80211: failed to load regulatory.db
- [ 5.254803] vcc3v3_pcie: disabling
- [ 5.255161] ALSA device list:
- [ 5.255442] No soundcards found.
- [ 5.256184] ttyS2 - failed to request DMA
- [ 5.257198] Freeing unused kernel memory: 1536K
- [ 5.303169] Run /init as init process
- Loading, please wait...
- starting version 237
- [ 5.524683] dwmmc_rockchip fe320000.dwmmc: Successfully tuned phase to 249
- [ 5.525327] mmc0: new ultra high speed SDR104 SDHC card at address aaaa
- [ 5.526702] mmcblk0: mmc0:aaaa SC32G 29.7 GiB
- [ 5.538500] mmcblk0: p1 p2 p3 p4 p5 p6 p7
- [ 5.560333] iommu: Adding device ff8f0000.vop to group 0
- [ 5.560960] rockchip-vop ff8f0000.vop: Linked as a consumer to ff8f3f00.iommu
- [ 5.562966] iommu: Adding device ff900000.vop to group 1
- [ 5.563652] rockchip-vop ff900000.vop: Linked as a consumer to ff903f00.iommu
- [ 5.570260] rockchip-drm display-subsystem: Linked as a consumer to ff8f0000.vop
- [ 5.571116] rockchip-drm display-subsystem: Linked as a consumer to ff900000.vop
- [ 5.572789] rockchip-drm display-subsystem: Linked as a consumer to ff940000.hdmi
- [ 5.576957] rockchip-drm display-subsystem: bound ff8f0000.vop (ops vop_component_ops [rockchipdrm])
- [ 5.579557] rockchip-drm display-subsystem: bound ff900000.vop (ops vop_component_ops [rockchipdrm])
- [ 5.580685] dwhdmi-rockchip ff940000.hdmi: Detected HDMI TX controller v2.11a with HDCP (DWC HDMI 2.0 TX PHY)
- [ 5.583184] rockchip-drm display-subsystem: bound ff940000.hdmi (ops dw_hdmi_rockchip_ops [rockchipdrm])
- [ 5.584023] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
- [ 5.584601] [drm] No driver support for vblank timestamp query.
- [ 5.585146] [drm] Cannot find any crtc or sizes
- [ 5.586519] [drm] Initialized rockchip 1.0.0 20140818 for display-subsystem on minor 0
- Begin: Loading essential drivers ... done.
- Begin: Running /scripts/init-premount ... done.
- Begin: Mounting root file system ... Begin: Running /scripts/local-top ... done.
- Begin: Running /scripts/local-premount ... done.
- [ 6.614782] [drm] Cannot find any crtc or sizes
- [ 11.666919] phy phy-ff770000.syscon:usb2-phy@e450.2: charger = USB_DCP_CHARGER
Advertisement
Add Comment
Please, Sign In to add comment
Advertisement