Advertisement
Guest User

openwrtboot

a guest
Jun 1st, 2021
27
Never
Not a member of Pastebin yet? Sign Up, it unlocks many cool features!
  1. [18778.21h.21m.57s.393] (IPQ40xx) # <INTERRUPT>
  2. [18778.21h.21m.57s.493] (IPQ40xx) # tftp 0x84000000 192.168.1.10:openwrt-ipq40xx-generic-netgear_ex6150v2-squashfs-factory.img
  3.  
  4. [18778.21h.22m.16s.879] eth0 PHY0 Down Speed :10 Half duplex
  5. [18778.21h.22m.16s.883] eth0 PHY1 Down Speed :10 Half duplex
  6. [18778.21h.22m.16s.886] eth0 PHY2 Down Speed :10 Half duplex
  7. [18778.21h.22m.16s.889] eth0 PHY3 up Speed :100 Half duplex
  8. [18778.21h.22m.16s.894] eth0 PHY4 Down Speed :10 Half duplex
  9. [18778.21h.22m.16s.897] Using eth0 device
  10. [18778.21h.22m.16s.899] TFTP from server 192.168.1.10; our IP address is 192.168.1.1
  11. [18778.21h.22m.16s.905] Filename 'openwrt-ipq40xx-generic-netgear_ex6150v2-squashfs-factory.img'.
  12. [18778.21h.22m.16s.911] Load address: 0x84000000
  13. [18778.21h.22m.16s.913] Loading: *#################################################################
  14. [18778.21h.22m.17s.833] #################################################################
  15. [18778.21h.22m.18s.744] #################################################################
  16. [18778.21h.22m.19s.644] #################################################################
  17. [18778.21h.22m.20s.538] #################################################################
  18. [18778.21h.22m.21s.441] #################################################################
  19. [18778.21h.22m.22s.337] ###
  20. [18778.21h.22m.22s.375] done
  21. [18778.21h.22m.22s.375] Bytes transferred = 5767301 (580085 hex)
  22. [18778.21h.22m.22s.380] (IPQ40xx) # bootm 0x84000080
  23.  
  24. [18778.21h.22m.25s.063] ## Booting kernel from FIT Image at 84000080 ...
  25. [18778.21h.22m.25s.067] Using 'config@4' configuration
  26. [18778.21h.22m.25s.070] Trying 'kernel@1' kernel subimage
  27. [18778.21h.22m.25s.076] Description: ARM OpenWrt Linux-4.14.232
  28. [18778.21h.22m.25s.077] Type: Kernel Image
  29. [18778.21h.22m.25s.080] Compression: gzip compressed
  30. [18778.21h.22m.25s.084] Data Start: 0x84000164
  31. [18778.21h.22m.25s.086] Data Size: 2980103 Bytes = 2.8 MiB
  32. [18778.21h.22m.25s.091] Architecture: ARM
  33. [18778.21h.22m.25s.093] OS: Linux
  34. [18778.21h.22m.25s.094] Load Address: 0x80208000
  35. [18778.21h.22m.25s.097] Entry Point: 0x80208000
  36. [18778.21h.22m.25s.100] Hash algo: crc32
  37. [18778.21h.22m.25s.102] Hash value: 2020282e
  38. [18778.21h.22m.25s.105] Hash algo: sha1
  39. [18778.21h.22m.25s.107] Hash value: 8c73e156ee34dfac04b65ebeec6f88ee06551420
  40. [18778.21h.22m.25s.112] Verifying Hash Integrity ... crc32+ sha1+ OK
  41. [18778.21h.22m.27s.736] ## Flattened Device Tree from FIT Image at 84000080
  42. [18778.21h.22m.27s.741] Using 'config@4' configuration
  43. [18778.21h.22m.27s.743] Trying 'fdt@1' FDT blob subimage
  44. [18778.21h.22m.27s.747] Description: ARM OpenWrt netgear_ex6150v2 device tree blob
  45. [18778.21h.22m.27s.752] Type: Flat Device Tree
  46. [18778.21h.22m.27s.755] Compression: uncompressed
  47. [18778.21h.22m.27s.758] Data Start: 0x842d7ba8
  48. [18778.21h.22m.27s.762] Data Size: 16938 Bytes = 16.5 KiB
  49. [18778.21h.22m.27s.765] Architecture: ARM
  50. [18778.21h.22m.27s.766] Hash algo: crc32
  51. [18778.21h.22m.27s.770] Hash value: 46143bd0
  52. [18778.21h.22m.27s.772] Hash algo: sha1
  53. [18778.21h.22m.27s.774] Hash value: c67830dfe5f24c44c5c77815dfe373b412f1c7c8
  54. [18778.21h.22m.27s.780] Verifying Hash Integrity ... crc32+ sha1+ OK
  55. [18778.21h.22m.27s.797] Booting using the fdt blob at 0x842d7ba8
  56. [18778.21h.22m.27s.801] Uncompressing Kernel Image ... OK
  57. [18778.21h.22m.32s.066] Loading Device Tree to 871e8000, end 871ef229 ... OK
  58. [18778.21h.22m.32s.092] ipq: fdt fixup unable to find compatible node
  59. [18778.21h.22m.32s.129] SF: Detected MX25L12805D with page size 4 KiB, total 16 MiB
  60. [18778.21h.22m.32s.134] flash_read will run command: sf read 0x871efbcc 0x1a0000 0x9
  61. [18778.21h.22m.32s.155] Using machid 0x8010000 from environment
  62. [18778.21h.22m.32s.159]
  63. [18778.21h.22m.32s.159] Starting kernel ...
  64. [18778.21h.22m.32s.162]
  65. [18778.21h.22m.32s.224] [ 0.000000] Booting Linux on physical CPU 0x0
  66. [18778.21h.22m.32s.230] [ 0.000000] Linux version 4.14.232 (alex@debian10-spielwiese) (gcc version 7.5.0 (OpenWrt GCC 7.5.0 r11352-1153773c78)) #0 SMP Fri May 28 13:26:31 2021
  67. [18778.21h.22m.32s.243] [ 0.000000] CPU: ARMv7 Processor [410fc075] revision 5 (ARMv7), cr=10c5387d
  68. [18778.21h.22m.32s.250] [ 0.000000] CPU: div instructions available: patching division code
  69. [18778.21h.22m.32s.256] [ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache
  70. [18778.21h.22m.32s.264] [ 0.000000] OF: fdt: Machine model: Netgear EX6150v2
  71. [18778.21h.22m.32s.269] [ 0.000000] Memory policy: Data cache writealloc
  72. [18778.21h.22m.32s.274] [ 0.000000] random: get_random_bytes called from start_kernel+0x88/0x3c8 with crng_init=0
  73. [18778.21h.22m.32s.282] [ 0.000000] percpu: Embedded 15 pages/cpu s29324 r8192 d23924 u61440
  74. [18778.21h.22m.32s.288] [ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 65024
  75. [18778.21h.22m.32s.296] [ 0.000000] Kernel command line:
  76. [18778.21h.22m.32s.298] [ 0.000000] PID hash table entries: 1024 (order: 0, 4096 bytes)
  77. [18778.21h.22m.32s.304] [ 0.000000] Dentry cache hash table entries: 32768 (order: 5, 131072 bytes)
  78. [18778.21h.22m.32s.311] [ 0.000000] Inode-cache hash table entries: 16384 (order: 4, 65536 bytes)
  79. [18778.21h.22m.32s.318] [ 0.000000] Memory: 249944K/262144K available (4313K kernel code, 138K rwdata, 1184K rodata, 1024K init, 228K bss, 12200K reserved, 0K cma-reserved, 0K highmem)
  80. [18778.21h.22m.32s.332] [ 0.000000] Virtual kernel memory layout:
  81. [18778.21h.22m.32s.336] [ 0.000000] vector : 0xffff0000 - 0xffff1000 ( 4 kB)
  82. [18778.21h.22m.32s.342] [ 0.000000] fixmap : 0xffc00000 - 0xfff00000 (3072 kB)
  83. [18778.21h.22m.32s.347] [ 0.000000] vmalloc : 0xd0800000 - 0xff800000 ( 752 MB)
  84. [18778.21h.22m.32s.353] [ 0.000000] lowmem : 0xc0000000 - 0xd0000000 ( 256 MB)
  85. [18778.21h.22m.32s.359] [ 0.000000] pkmap : 0xbfe00000 - 0xc0000000 ( 2 MB)
  86. [18778.21h.22m.32s.365] [ 0.000000] modules : 0xbf000000 - 0xbfe00000 ( 14 MB)
  87. [18778.21h.22m.32s.370] [ 0.000000] .text : 0xc0208000 - 0xc07365c0 (5306 kB)
  88. [18778.21h.22m.32s.376] [ 0.000000] .init : 0xc0900000 - 0xc0a00000 (1024 kB)
  89. [18778.21h.22m.32s.384] [ 0.000000] .data : 0xc0a00000 - 0xc0a22b40 ( 139 kB)
  90. [18778.21h.22m.32s.388] [ 0.000000] .bss : 0xc0a24000 - 0xc0a5d2d0 ( 229 kB)
  91. [18778.21h.22m.32s.393] [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
  92. [18778.21h.22m.32s.400] [ 0.000000] Hierarchical RCU implementation.
  93. [18778.21h.22m.32s.404] [ 0.000000] NR_IRQS: 16, nr_irqs: 16, preallocated irqs: 16
  94. [18778.21h.22m.32s.410] [ 0.000000] arch_timer: cp15 timer(s) running at 48.00MHz (virt).
  95. [18778.21h.22m.32s.417] [ 0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0xb11fd3bfb, max_idle_ns: 440795203732 ns
  96. [18778.21h.22m.32s.426] [ 0.000008] sched_clock: 56 bits at 48MHz, resolution 20ns, wraps every 4398046511096ns
  97. [18778.21h.22m.32s.434] [ 0.000022] Switching to timer-based delay loop, resolution 20ns
  98. [18778.21h.22m.32s.440] [ 0.000248] Calibrating delay loop (skipped), value calculated using timer frequency.. 96.00 BogoMIPS (lpj=480000)
  99. [18778.21h.22m.32s.451] [ 0.000266] pid_max: default: 32768 minimum: 301
  100. [18778.21h.22m.32s.455] [ 0.000407] Mount-cache hash table entries: 1024 (order: 0, 4096 bytes)
  101. [18778.21h.22m.32s.463] [ 0.000423] Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes)
  102. [18778.21h.22m.32s.469] [ 0.001023] CPU: Testing write buffer coherency: ok
  103. [18778.21h.22m.32s.474] [ 0.001713] Setting up static identity map for 0x80300000 - 0x80300060
  104. [18778.21h.22m.32s.480] [ 0.001860] Hierarchical SRCU implementation.
  105. [18778.21h.22m.32s.485] [ 0.002512] smp: Bringing up secondary CPUs ...
  106. [18778.21h.22m.32s.489] [ 0.005251] smp: Brought up 1 node, 4 CPUs
  107. [18778.21h.22m.32s.493] [ 0.005270] SMP: Total of 4 processors activated (384.00 BogoMIPS).
  108. [18778.21h.22m.32s.499] [ 0.005279] CPU: All CPU(s) started in SVC mode.
  109. [18778.21h.22m.32s.504] [ 0.009137] VFP support v0.3: implementor 41 architecture 2 part 30 variant 7 rev 5
  110. [18778.21h.22m.32s.512] [ 0.009282] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns
  111. [18778.21h.22m.32s.522] [ 0.009306] futex hash table entries: 1024 (order: 4, 65536 bytes)
  112. [18778.21h.22m.32s.528] [ 0.009486] pinctrl core: initialized pinctrl subsystem
  113. [18778.21h.22m.32s.533] [ 0.010434] NET: Registered protocol family 16
  114. [18778.21h.22m.32s.537] [ 0.010702] DMA: preallocated 256 KiB pool for atomic coherent allocations
  115. [18778.21h.22m.32s.545] [ 0.011726] cpuidle: using governor ladder
  116. [18778.21h.22m.32s.549] [ 0.011771] cpuidle: using governor menu
  117. [18778.21h.22m.32s.552] [ 0.027821] usbcore: registered new interface driver usbfs
  118. [18778.21h.22m.32s.558] [ 0.027882] usbcore: registered new interface driver hub
  119. [18778.21h.22m.32s.563] [ 0.027938] usbcore: registered new device driver usb
  120. [18778.21h.22m.32s.568] [ 0.027982] pps_core: LinuxPPS API ver. 1 registered
  121. [18778.21h.22m.32s.573] [ 0.027992] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
  122. [18778.21h.22m.32s.582] [ 0.028015] PTP clock support registered
  123. [18778.21h.22m.32s.586] [ 0.029086] clocksource: Switched to clocksource arch_sys_counter
  124. [18778.21h.22m.32s.592] [ 0.029906] NET: Registered protocol family 2
  125. [18778.21h.22m.32s.596] [ 0.030565] TCP established hash table entries: 2048 (order: 1, 8192 bytes)
  126. [18778.21h.22m.32s.603] [ 0.030606] TCP bind hash table entries: 2048 (order: 2, 16384 bytes)
  127. [18778.21h.22m.32s.610] [ 0.030655] TCP: Hash tables configured (established 2048 bind 2048)
  128. [18778.21h.22m.32s.616] [ 0.030766] UDP hash table entries: 256 (order: 1, 8192 bytes)
  129. [18778.21h.22m.32s.622] [ 0.030800] UDP-Lite hash table entries: 256 (order: 1, 8192 bytes)
  130. [18778.21h.22m.32s.629] [ 0.030995] NET: Registered protocol family 1
  131. [18778.21h.22m.32s.632] [ 0.031957] No memory allocated for crashlog
  132. [18778.21h.22m.32s.637] [ 0.032161] workingset: timestamp_bits=30 max_order=16 bucket_order=0
  133. [18778.21h.22m.32s.643] [ 0.035360] squashfs: version 4.0 (2009/01/31) Phillip Lougher
  134. [18778.21h.22m.32s.649] [ 0.035375] jffs2: version 2.2 (NAND) (SUMMARY) (LZMA) (RTIME) (CMODE_PRIORITY) (c) 2001-2006 Red Hat, Inc.
  135. [18778.21h.22m.32s.659] [ 0.040479] io scheduler noop registered
  136. [18778.21h.22m.32s.663] [ 0.040497] io scheduler deadline registered (default)
  137. [18778.21h.22m.32s.668] [ 0.042464] bam-dma-engine 8e04000.dma: num-channels unspecified in dt
  138. [18778.21h.22m.32s.674] [ 0.042481] bam-dma-engine 8e04000.dma: num-ees unspecified in dt
  139. [18778.21h.22m.32s.681] [ 0.043115] tcsr 1949000.tcsr: setting wifi_glb_cfg = 41000000
  140. [18778.21h.22m.32s.686] [ 0.043195] tcsr 1953000.ess_tcsr: setting ess interface select = 0
  141. [18778.21h.22m.32s.692] [ 0.043269] tcsr 1957000.tcsr: setting wifi_noc_memtype_m0_m2 = 2222222
  142. [18778.21h.22m.32s.699] [ 0.043485] Serial: 8250/16550 driver, 2 ports, IRQ sharing disabled
  143. [18778.21h.22m.32s.705] [ 0.044048] msm_serial 78af000.serial: msm_serial: detected port #0
  144. [18778.21h.22m.32s.712] [ 0.044093] msm_serial 78af000.serial: uartclk = 1843200
  145. [18778.21h.22m.32s.717] [ 0.044141] 78af000.serial: ttyMSM0 at MMIO 0x78af000 (irq = 25, base_baud = 115200) is a MSM
  146. [18778.21h.22m.32s.725] [ 0.044167] msm_serial: console setup on port #0
  147. [18778.21h.22m.32s.730] [ 0.543406] console [ttyMSM0] enabled
  148. [18778.21h.22m.32s.734] [ 0.548278] msm_serial: driver initialized
  149. [18778.21h.22m.32s.738] [ 0.555728] loop: module loaded
  150. [18778.21h.22m.32s.741] [ 0.556368] spi_gpio led_spi: gpio-miso property not found, switching to no-rx mode
  151. [18778.21h.22m.32s.748] [ 0.560057] spi_qup 78b5000.spi: IN:block:16, fifo:64, OUT:block:16, fifo:64
  152. [18778.21h.22m.32s.755] [ 0.567093] m25p80 spi0.0: mx25l12805d (16384 Kbytes)
  153. [18778.21h.22m.32s.762] [ 0.573687] 13 fixed-partitions partitions found on MTD device spi0.0
  154. [18778.21h.22m.32s.767] [ 0.578532] Creating 13 MTD partitions on "spi0.0":
  155. [18778.21h.22m.32s.772] [ 0.584980] 0x000000000000-0x000000040000 : "SBL1"
  156. [18778.21h.22m.32s.777] [ 0.590316] 0x000000040000-0x000000060000 : "MIBIB"
  157. [18778.21h.22m.32s.781] [ 0.595066] 0x000000060000-0x0000000c0000 : "QSEE"
  158. [18778.21h.22m.32s.786] [ 0.599869] 0x0000000c0000-0x0000000d0000 : "CDT"
  159. [18778.21h.22m.32s.791] [ 0.604703] 0x0000000d0000-0x0000000e0000 : "DDRPARAMS"
  160. [18778.21h.22m.32s.796] [ 0.609509] 0x0000000e0000-0x0000000f0000 : "APPSBLENV"
  161. [18778.21h.22m.32s.801] [ 0.614503] 0x0000000f0000-0x000000170000 : "APPSBL"
  162. [18778.21h.22m.32s.806] [ 0.619734] 0x000000170000-0x000000180000 : "ART"
  163. [18778.21h.22m.32s.811] [ 0.624887] 0x000000180000-0x000000190000 : "config"
  164. [18778.21h.22m.32s.816] [ 0.629543] 0x000000190000-0x0000001a0000 : "pot"
  165. [18778.21h.22m.32s.821] [ 0.634545] 0x0000001a0000-0x0000001b0000 : "dnidata"
  166. [18778.21h.22m.32s.826] [ 0.639180] 0x0000001b0000-0x000000fc0000 : "firmware"
  167. [18778.21h.22m.32s.831] [ 0.644560] 2 fit-fw partitions found on MTD device firmware
  168. [18778.21h.22m.32s.836] [ 0.648671] Creating 2 MTD partitions on "firmware":
  169. [18778.21h.22m.32s.841] [ 0.654527] 0x000000000000-0x0000002e0000 : "kernel"
  170. [18778.21h.22m.32s.846] [ 0.660008] 0x0000002e0000-0x000000e10000 : "rootfs"
  171. [18778.21h.22m.32s.851] [ 0.664893] mtd: device 13 (rootfs) set to be root filesystem
  172. [18778.21h.22m.32s.857] [ 0.669520] 1 squashfs-split partitions found on MTD device rootfs
  173. [18778.21h.22m.32s.863] [ 0.674980] 0x000000550000-0x000000e10000 : "rootfs_data"
  174. [18778.21h.22m.32s.868] [ 0.681651] 0x000000fc0000-0x000001000000 : "language"
  175. [18778.21h.22m.32s.873] [ 0.687674] libphy: ipq40xx_mdio: probed
  176. [18778.21h.22m.32s.903] [ 0.722384] ESS reset ok!
  177. [18778.21h.22m.32s.936] [ 0.755359] ESS reset ok!
  178. [18778.21h.22m.33s.370] [ 1.189494] libphy: Fixed MDIO Bus: probed
  179. [18778.21h.22m.33s.375] [ 1.192650] i2c /dev entries driver
  180. [18778.21h.22m.33s.402] [ 1.220335] NET: Registered protocol family 10
  181. [18778.21h.22m.33s.406] [ 1.221633] Segment Routing with IPv6
  182. [18778.21h.22m.33s.409] [ 1.223747] NET: Registered protocol family 17
  183. [18778.21h.22m.33s.414] [ 1.227736] 8021q: 802.1Q VLAN Support v1.8
  184. [18778.21h.22m.33s.418] [ 1.231834] Registering SWP/SWPB emulation handler
  185. [ 1.246973] VFS: Mounted root (squashfs filesystem) readonly on device 31:13.
  186. [18778.21h.22m.33s.435] [ 1.248555] Freeing unused kernel memory: 1024K
  187. [18778.21h.22m.33s.563] [ 1.382890] random: fast init done
  188. [18778.21h.22m.34s.307] [ 2.126280] init: Console is alive
  189. [18778.21h.22m.34s.311] [ 2.126487] init: - watchdog -
  190. [18778.21h.22m.35s.396] [ 3.215424] kmodloader: loading kernel modules from /etc/modules-boot.d/*
  191. [18778.21h.22m.36s.153] [ 3.972593] kmodloader: done loading kernel modules from /etc/modules-boot.d/*
  192. [18778.21h.22m.36s.161] [ 3.979367] init: - preinit -
  193. [18778.21h.22m.36s.809] [ 4.629313] random: jshn: uninitialized urandom read (4 bytes read)
  194. [18778.21h.22m.36s.840] [ 4.660064] random: jshn: uninitialized urandom read (4 bytes read)
  195. [18778.21h.22m.36s.871] [ 4.690859] random: jshn: uninitialized urandom read (4 bytes read)
  196. [18778.21h.22m.37s.017] [ 4.837317] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
  197. [18778.21h.22m.37s.024] [ 4.837411] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
  198. [18778.21h.22m.37s.073] Press the [f] key and hit [enter] to enter failsafe mode
  199. [18778.21h.22m.37s.080] Press the [1], [2], [3] or [4] key and hit [enter] to select the debug level
  200. [18778.21h.22m.40s.298] [ 8.118112] mount_root: jffs2 not ready yet, using temporary tmpfs overlay
  201. [18778.21h.22m.40s.310] [ 8.130048] urandom-seed: Seed file not found (/etc/urandom.seed)
  202. [18778.21h.22m.40s.341] [ 8.161060] procd: - early -
  203. [18778.21h.22m.40s.347] [ 8.161193] procd: - watchdog -
  204. [18778.21h.22m.41s.061] [ 8.880237] procd: - watchdog -
  205. [18778.21h.22m.41s.065] [ 8.883189] procd: - ubus -
  206. [18778.21h.22m.41s.198] [ 9.017698] urandom_read: 5 callbacks suppressed
  207. [18778.21h.22m.41s.203] [ 9.017706] random: ubusd: uninitialized urandom read (4 bytes read)
  208. [18778.21h.22m.41s.213] [ 9.022240] random: ubusd: uninitialized urandom read (4 bytes read)
  209. [18778.21h.22m.41s.216] [ 9.028977] procd: - init -
  210. [18778.21h.22m.41s.259] Please press Enter to activate this console.
  211. [18778.21h.22m.41s.533] [ 9.352405] kmodloader: loading kernel modules from /etc/modules.d/*
  212. [18778.21h.22m.41s.540] [ 9.356292] ip6_tables: (C) 2000-2006 Netfilter Core Team
  213. [18778.21h.22m.41s.547] [ 9.362829] Loading modules backported from Linux version v4.19.189-0-g97a8651cadce
  214. [18778.21h.22m.41s.553] [ 9.363128] Backport generated by backports.git v4.19.189-1-0-gf6aeae51
  215. [18778.21h.22m.41s.559] [ 9.373037] ip_tables: (C) 2000-2006 Netfilter Core Team
  216. [18778.21h.22m.41s.565] [ 9.381986] nf_conntrack version 0.5.0 (4096 buckets, 16384 max)
  217. [18778.21h.22m.41s.592] [ 9.411517] xt_time: kernel timezone is -0000
  218. [18778.21h.22m.41s.617] [ 9.436408] urngd: v1.0.2 started.
  219. [18778.21h.22m.41s.621] [ 9.438421] PPP generic driver version 2.4.2
  220. [18778.21h.22m.41s.625] [ 9.440106] NET: Registered protocol family 24
  221. [18778.21h.22m.41s.681] [ 9.500942] random: crng init done
  222. [18778.21h.22m.41s.812] [ 9.631765] ath10k_ahb a000000.wifi: Direct firmware load for ath10k/fwcfg-ahb-a000000.wifi.txt failed with error -2
  223. [18778.21h.22m.41s.826] [ 9.631808] ath10k_ahb a000000.wifi: Falling back to user helper
  224. [18778.21h.22m.41s.947] [ 9.766696] firmware ath10k!fwcfg-ahb-a000000.wifi.txt: firmware_loading_store: map pages failed
  225. [18778.21h.22m.41s.956] [ 9.767041] ath10k_ahb a000000.wifi: Direct firmware load for ath10k/pre-cal-ahb-a000000.wifi.bin failed with error -2
  226. [18778.21h.22m.41s.967] [ 9.774666] ath10k_ahb a000000.wifi: Falling back to user helper
  227. [18778.21h.22m.42s.077] [ 9.896407] ath10k_ahb a000000.wifi: Direct firmware load for ath10k/QCA4019/hw1.0/ct-firmware-5.bin failed with error -2
  228. [18778.21h.22m.42s.091] [ 9.896469] ath10k_ahb a000000.wifi: Falling back to user helper
  229. [18778.21h.22m.42s.146] [ 9.965397] firmware ath10k!QCA4019!hw1.0!ct-firmware-5.bin: firmware_loading_store: map pages failed
  230. [18778.21h.22m.42s.156] [ 9.965806] ath10k_ahb a000000.wifi: Direct firmware load for ath10k/QCA4019/hw1.0/ct-firmware-2.bin failed with error -2
  231. [18778.21h.22m.42s.167] [ 9.973724] ath10k_ahb a000000.wifi: Falling back to user helper
  232. [18778.21h.22m.42s.226] [ 10.046199] firmware ath10k!QCA4019!hw1.0!ct-firmware-2.bin: firmware_loading_store: map pages failed
  233. [18778.21h.22m.42s.236] [ 10.046607] ath10k_ahb a000000.wifi: Direct firmware load for ath10k/QCA4019/hw1.0/firmware-6.bin failed with error -2
  234. [18778.21h.22m.42s.247] [ 10.054527] ath10k_ahb a000000.wifi: Falling back to user helper
  235. [18778.21h.22m.42s.304] [ 10.124127] firmware ath10k!QCA4019!hw1.0!firmware-6.bin: firmware_loading_store: map pages failed
  236. [18778.21h.22m.42s.883] [ 10.703142] ath10k_ahb a000000.wifi: qca4019 hw1.0 target 0x01000000 chip_id 0x003b00ff sub 0000:0000
  237. [18778.21h.22m.42s.893] [ 10.703189] ath10k_ahb a000000.wifi: kconfig debug 0 debugfs 1 tracing 0 dfs 1 testmode 0
  238. [18778.21h.22m.42s.902] [ 10.716056] ath10k_ahb a000000.wifi: firmware ver 10.4b-ct-4019-fW-13-8c5b2baa2 api 5 features mfp,peer-flow-ctrl,txstatus-noack,wmi-10.x-CT,ratemask-CT,regdump-CT,txrate-CT,flush-all-CT,pingpong-CT,ch-regs-CT,nop-CT,set-special-CT,tx-rc-CT,cust-stats-CT,txrate2-CT,beacon-cb-CT,wmi-block-ack-CT,wmi-bcn-rc-CT crc32 1f3ed50f
  239. [18778.21h.22m.42s.988] [ 10.807562] ath10k_ahb a000000.wifi: board_file api 2 bmi_id 0:16 crc32 e2dfaa91
  240. [18778.21h.22m.44s.297] [ 12.116955] ath10k_ahb a000000.wifi: 10.4 wmi init: vdevs: 16 peers: 48 tid: 96
  241. [18778.21h.22m.44s.305] [ 12.117007] ath10k_ahb a000000.wifi: msdu-desc: 2500 skid: 32
  242. [18778.21h.22m.44s.332] [ 12.152294] ath10k_ahb a000000.wifi: wmi print 'P 48/48 V 16 K 144 PH 176 T 186 msdu-desc: 2500 sw-crypt: 0 ct-sta: 0'
  243. [18778.21h.22m.44s.344] [ 12.153292] ath10k_ahb a000000.wifi: wmi print 'free: 53252 iram: 13576 sram: 35752'
  244. [18778.21h.22m.44s.439] [ 12.254901] ath10k_ahb a000000.wifi: htt-ver 2.2 wmi-op 6 htt-op 4 cal pre-cal-file max-sta 32 raw 0 hwcrypto 1
  245. [18778.21h.22m.44s.731] [ 12.550993] ath10k_ahb a800000.wifi: Direct firmware load for ath10k/fwcfg-ahb-a800000.wifi.txt failed with error -2
  246. [18778.21h.22m.44s.745] [ 12.551045] ath10k_ahb a800000.wifi: Falling back to user helper
  247. [18778.21h.22m.45s.120] [ 12.940023] firmware ath10k!fwcfg-ahb-a800000.wifi.txt: firmware_loading_store: map pages failed
  248. [18778.21h.22m.45s.130] [ 12.940346] ath10k_ahb a800000.wifi: Direct firmware load for ath10k/pre-cal-ahb-a800000.wifi.bin failed with error -2
  249. [18778.21h.22m.45s.141] [ 12.947892] ath10k_ahb a800000.wifi: Falling back to user helper
  250. [18778.21h.22m.45s.291] [ 13.110267] ath10k_ahb a800000.wifi: Direct firmware load for ath10k/QCA4019/hw1.0/ct-firmware-5.bin failed with error -2
  251. [18778.21h.22m.45s.303] [ 13.110319] ath10k_ahb a800000.wifi: Falling back to user helper
  252. [18778.21h.22m.45s.367] [ 13.187047] firmware ath10k!QCA4019!hw1.0!ct-firmware-5.bin: firmware_loading_store: map pages failed
  253. [18778.21h.22m.45s.377] [ 13.187874] ath10k_ahb a800000.wifi: Direct firmware load for ath10k/QCA4019/hw1.0/ct-firmware-2.bin failed with error -2
  254. [18778.21h.22m.45s.388] [ 13.195395] ath10k_ahb a800000.wifi: Falling back to user helper
  255. [18778.21h.22m.45s.449] [ 13.268855] firmware ath10k!QCA4019!hw1.0!ct-firmware-2.bin: firmware_loading_store: map pages failed
  256. [18778.21h.22m.45s.459] [ 13.269278] ath10k_ahb a800000.wifi: Direct firmware load for ath10k/QCA4019/hw1.0/firmware-6.bin failed with error -2
  257. [18778.21h.22m.45s.470] [ 13.277086] ath10k_ahb a800000.wifi: Falling back to user helper
  258. [18778.21h.22m.45s.528] [ 13.347437] firmware ath10k!QCA4019!hw1.0!firmware-6.bin: firmware_loading_store: map pages failed
  259. [18778.21h.22m.45s.537] [ 13.347755] ath10k_ahb a800000.wifi: qca4019 hw1.0 target 0x01000000 chip_id 0x003b00ff sub 0000:0000
  260. [18778.21h.22m.45s.546] [ 13.355401] ath10k_ahb a800000.wifi: kconfig debug 0 debugfs 1 tracing 0 dfs 1 testmode 0
  261. [18778.21h.22m.45s.555] [ 13.369778] ath10k_ahb a800000.wifi: firmware ver 10.4b-ct-4019-fW-13-8c5b2baa2 api 5 features mfp,peer-flow-ctrl,txstatus-noack,wmi-10.x-CT,ratemask-CT,regdump-CT,txrate-CT,flush-all-CT,pingpong-CT,ch-regs-CT,nop-CT,set-special-CT,tx-rc-CT,cust-stats-CT,txrate2-CT,beacon-cb-CT,wmi-block-ack-CT,wmi-bcn-rc-CT crc32 1f3ed50f
  262. [18778.21h.22m.45s.604] [ 13.423763] ath10k_ahb a800000.wifi: board_file api 2 bmi_id 0:17 crc32 e2dfaa91
  263. [18778.21h.22m.46s.913] [ 14.732256] ath10k_ahb a800000.wifi: 10.4 wmi init: vdevs: 16 peers: 48 tid: 96
  264. [18778.21h.22m.46s.921] [ 14.732301] ath10k_ahb a800000.wifi: msdu-desc: 2500 skid: 32
  265. [18778.21h.22m.46s.949] [ 14.768230] ath10k_ahb a800000.wifi: wmi print 'P 48/48 V 16 K 144 PH 176 T 186 msdu-desc: 2500 sw-crypt: 0 ct-sta: 0'
  266. [18778.21h.22m.46s.960] [ 14.769989] ath10k_ahb a800000.wifi: wmi print 'free: 53252 iram: 13576 sram: 35752'
  267. [18778.21h.22m.47s.050] [ 14.869471] ath10k_ahb a800000.wifi: htt-ver 2.2 wmi-op 6 htt-op 4 cal pre-cal-file max-sta 32 raw 0 hwcrypto 1
  268. [18778.21h.22m.47s.164] [ 14.983450] kmodloader: done loading kernel modules from /etc/modules.d/*
  269. [18778.21h.23m.17s.651] [ 45.470150] jffs2_scan_eraseblock(): End of filesystem marker found at 0x0
  270. [18778.21h.23m.17s.657] [ 45.470214] jffs2_build_filesystem(): unlocking the mtd device...
  271. [18778.21h.23m.17s.663] [ 45.470219] done.
  272. [18778.21h.23m.18s.409] [ 45.482246] jffs2_build_filesystem(): erasing all blocks after the end marker...
  273. [18778.21h.23m.18s.417] [ 46.228729] br-lan: port 1(eth0) entered blocking state
  274. [18778.21h.23m.18s.422] [ 46.235270] br-lan: port 1(eth0) entered disabled state
  275. [18778.21h.23m.18s.429] [ 46.240629] device eth0 entered promiscuous mode
  276. [18778.21h.23m.18s.433] [ 46.247492] IPv6: ADDRCONF(NETDEV_UP): br-lan: link is not ready
  277. [18778.21h.23m.19s.471] [ 47.289173] br-lan: port 1(eth0) entered blocking state
  278. [18778.21h.23m.19s.476] [ 47.289215] br-lan: port 1(eth0) entered forwarding state
  279. [18778.21h.23m.19s.481] [ 47.293604] IPv6: ADDRCONF(NETDEV_CHANGE): br-lan: link becomes ready
  280. [18778.21h.23m.57s.448] [ 85.266659] done.
  281. [18778.21h.23m.57s.449] [ 85.267106] jffs2: notice: (922) jffs2_build_xattr_subsystem: complete building xattr subsystem, 0 of xdatum (0 unchecked, 0 orphan) and 0 of xref (0 dead, 0 orphan) found.
  282. [18778.21h.23m.57s.773] [ 85.592191] overlayfs: upper fs does not support tmpfile.
  283. [18778.21h.29m.37s.260]
  284. [18778.21h.29m.37s.299]
  285. [18778.21h.29m.37s.300]
  286. [18778.21h.29m.37s.300] BusyBox v1.30.1 () built-in shell (ash)
  287. [18778.21h.29m.37s.303]
  288. [18778.21h.29m.37s.304] _______ ________ __
  289. [18778.21h.29m.37s.308] | |.-----.-----.-----.| | | |.----.| |_
  290. [18778.21h.29m.37s.312] | - || _ | -__| || | | || _|| _|
  291. [18778.21h.29m.37s.317] |_______|| __|_____|__|__||________||__| |____|
  292. [18778.21h.29m.37s.322] |__| W I R E L E S S F R E E D O M
  293. [18778.21h.29m.37s.327] -----------------------------------------------------
  294. [18778.21h.29m.37s.331] OpenWrt 19.07-SNAPSHOT, r11352-1153773c78
  295. [18778.21h.29m.37s.336] -----------------------------------------------------
  296. [18778.21h.29m.37s.339] === WARNING! =====================================
  297. [18778.21h.29m.37s.344] There is no root password defined on this device!
  298. [18778.21h.29m.37s.348] Use the "passwd" command to set up a new password
  299. [18778.21h.29m.37s.354] in order to prevent unauthorized SSH logins.
  300. [18778.21h.29m.37s.357] --------------------------------------------------
  301. [18778.21h.29m.37s.361] root@OpenWrt:/#
Advertisement
RAW Paste Data Copied
Advertisement