Advertisement
Not a member of Pastebin yet?
Sign Up,
it unlocks many cool features!
- Wiphy phy1
- max # scan SSIDs: 4
- max scan IEs length: 2257 bytes
- max # sched scan SSIDs: 0
- max # match sets: 0
- max # scan plans: 1
- max scan plan interval: -1
- max scan plan iterations: 0
- Retry short limit: 7
- Retry long limit: 4
- Coverage class: 0 (up to 0m)
- Device supports AP-side u-APSD.
- Device supports T-DLS.
- Available Antennas: TX 0x3 RX 0x3
- Configured Antennas: TX 0x3 RX 0x3
- Supported interface modes:
- * IBSS
- * managed
- * AP
- * AP/VLAN
- * monitor
- * mesh point
- * P2P-client
- * P2P-GO
- * outside context of a BSS
- Band 1:
- Capabilities: 0x11ee
- HT20/HT40
- SM Power Save disabled
- RX HT20 SGI
- RX HT40 SGI
- TX STBC
- RX STBC 1-stream
- Max AMSDU length: 3839 bytes
- DSSS/CCK HT40
- Maximum RX AMPDU length 65535 bytes (exponent: 0x003)
- Minimum RX AMPDU time spacing: 8 usec (0x06)
- HT TX/RX MCS rate indexes supported: 0-15
- Frequencies:
- * 2412 MHz [1] (20.0 dBm)
- * 2417 MHz [2] (20.0 dBm)
- * 2422 MHz [3] (20.0 dBm)
- * 2427 MHz [4] (20.0 dBm)
- * 2432 MHz [5] (20.0 dBm)
- * 2437 MHz [6] (20.0 dBm)
- * 2442 MHz [7] (20.0 dBm)
- * 2447 MHz [8] (20.0 dBm)
- * 2452 MHz [9] (20.0 dBm)
- * 2457 MHz [10] (20.0 dBm)
- * 2462 MHz [11] (20.0 dBm)
- * 2467 MHz [12] (20.0 dBm)
- * 2472 MHz [13] (20.0 dBm)
- * 2484 MHz [14] (disabled)
- valid interface combinations:
- * #{ managed } <= 2048, #{ AP, mesh point } <= 8, #{ P2P-client, P2P-GO } <= 1, #{ IBSS } <= 1,
- total <= 2048, #channels <= 1, STA/AP BI must match, radar detect widths: { 20 MHz (no HT), 20 MHz, 40 MHz }
- HT Capability overrides:
- * MCS: ff ff ff ff ff ff ff ff ff ff
- * maximum A-MSDU length
- * supported channel width
- * short GI for 40 MHz
- * max A-MPDU length exponent
- * min MPDU start spacing
- Supported extended features:
- * [ RRM ]: RRM
- * [ CQM_RSSI_LIST ]: multiple CQM_RSSI_THOLD records
- * [ CONTROL_PORT_OVER_NL80211 ]: control port over nl80211
- * [ TXQS ]: FQ-CoDel-enabled intermediate TXQs
- * [ AIRTIME_FAIRNESS ]: airtime fairness scheduling
- Wiphy phy0
- max # scan SSIDs: 16
- max scan IEs length: 199 bytes
- max # sched scan SSIDs: 0
- max # match sets: 0
- max # scan plans: 1
- max scan plan interval: -1
- max scan plan iterations: 0
- Retry short limit: 7
- Retry long limit: 4
- Coverage class: 0 (up to 0m)
- Device supports AP-side u-APSD.
- Device supports T-DLS.
- Available Antennas: TX 0x3 RX 0x3
- Configured Antennas: TX 0x3 RX 0x3
- Supported interface modes:
- * IBSS
- * managed
- * AP
- * AP/VLAN
- * monitor
- * mesh point
- * P2P-client
- * P2P-GO
- * P2P-device
- Band 2:
- Capabilities: 0x19ef
- RX LDPC
- HT20/HT40
- SM Power Save disabled
- RX HT20 SGI
- RX HT40 SGI
- TX STBC
- RX STBC 1-stream
- Max AMSDU length: 7935 bytes
- DSSS/CCK HT40
- Maximum RX AMPDU length 65535 bytes (exponent: 0x003)
- Minimum RX AMPDU time spacing: 8 usec (0x06)
- HT TX/RX MCS rate indexes supported: 0-15
- VHT Capabilities (0x339979fa):
- Max MPDU length: 11454
- Supported Channel Width: 160 MHz, 80+80 MHz
- RX LDPC
- short GI (80 MHz)
- short GI (160/80+80 MHz)
- TX STBC
- SU Beamformer
- SU Beamformee
- MU Beamformer
- MU Beamformee
- RX antenna pattern consistency
- TX antenna pattern consistency
- VHT RX MCS set:
- 1 streams: MCS 0-9
- 2 streams: MCS 0-9
- 3 streams: not supported
- 4 streams: not supported
- 5 streams: not supported
- 6 streams: not supported
- 7 streams: not supported
- 8 streams: not supported
- VHT RX highest supported: 780 Mbps
- VHT TX MCS set:
- 1 streams: MCS 0-9
- 2 streams: MCS 0-9
- 3 streams: not supported
- 4 streams: not supported
- 5 streams: not supported
- 6 streams: not supported
- 7 streams: not supported
- 8 streams: not supported
- VHT TX highest supported: 780 Mbps
- Frequencies:
- * 5180 MHz [36] (23.0 dBm)
- * 5200 MHz [40] (23.0 dBm)
- * 5220 MHz [44] (23.0 dBm)
- * 5240 MHz [48] (23.0 dBm)
- * 5260 MHz [52] (20.0 dBm) (radar detection)
- * 5280 MHz [56] (20.0 dBm) (radar detection)
- * 5300 MHz [60] (20.0 dBm) (radar detection)
- * 5320 MHz [64] (20.0 dBm) (radar detection)
- * 5500 MHz [100] (26.0 dBm) (radar detection)
- * 5520 MHz [104] (26.0 dBm) (radar detection)
- * 5540 MHz [108] (26.0 dBm) (radar detection)
- * 5560 MHz [112] (26.0 dBm) (radar detection)
- * 5580 MHz [116] (26.0 dBm) (radar detection)
- * 5600 MHz [120] (26.0 dBm) (radar detection)
- * 5620 MHz [124] (26.0 dBm) (radar detection)
- * 5640 MHz [128] (26.0 dBm) (radar detection)
- * 5660 MHz [132] (26.0 dBm) (radar detection)
- * 5680 MHz [136] (26.0 dBm) (radar detection)
- * 5700 MHz [140] (26.0 dBm) (radar detection)
- * 5720 MHz [144] (disabled)
- * 5745 MHz [149] (13.0 dBm)
- * 5765 MHz [153] (13.0 dBm)
- * 5785 MHz [157] (13.0 dBm)
- * 5805 MHz [161] (13.0 dBm)
- * 5825 MHz [165] (13.0 dBm)
- * 5845 MHz [169] (13.0 dBm)
- * 5865 MHz [173] (13.0 dBm)
- valid interface combinations:
- * #{ managed } <= 16, #{ AP, mesh point } <= 16, #{ IBSS } <= 1,
- total <= 16, #channels <= 1, STA/AP BI must match, radar detect widths: { 20 MHz (no HT), 20 MHz, 40 MHz, 80 MHz, 80+80 MHz, 160 MHz }
- HT Capability overrides:
- * MCS: ff ff ff ff ff ff ff ff ff ff
- * maximum A-MSDU length
- * supported channel width
- * short GI for 40 MHz
- * max A-MPDU length exponent
- * min MPDU start spacing
- Supported extended features:
- * [ VHT_IBSS ]: VHT-IBSS
- * [ RRM ]: RRM
- * [ SET_SCAN_DWELL ]: scan dwell setting
- * [ CQM_RSSI_LIST ]: multiple CQM_RSSI_THOLD records
- * [ CONTROL_PORT_OVER_NL80211 ]: control port over nl80211
- * [ TXQS ]: FQ-CoDel-enabled intermediate TXQs
Advertisement
Add Comment
Please, Sign In to add comment
Advertisement