Ledger Nano X - The secure hardware wallet
SHARE
TWEET

T95Max+ dmesg.log

a guest Mar 2nd, 2020 13 Never
Not a member of Pastebin yet? Sign Up, it unlocks many cool features!
  1. [    0.000000@0] Booting Linux on physical CPU 0x0
  2. [    0.000000@0] Linux version 4.9.113 (superceleron@superserver) (gcc version 6.3.1 20170109 (Linaro GCC 6.3-2017.02) ) #1 SMP PREEMPT Wed Feb 19 17:04:24 WET 2020
  3. [    0.000000@0] CPU: ARMv7 Processor [411fd050] revision 0 (ARMv7), cr=10c5383d
  4. [    0.000000@0] CPU: div instructions available: patching division code
  5. [    0.000000@0] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache
  6. [    0.000000@0] OF: fdt:Machine model: Amlogic
  7. [    0.000000@0] Reserved memory: created CMA memory pool at 0x05000000, size 4 MiB
  8. [    0.000000@0] OF: reserved mem: initialized node linux,secmon, compatible id shared-dma-pool
  9. [    0.000000@0] Reserved memory: created CMA memory pool at 0x7f800000, size 8 MiB
  10. [    0.000000@0] OF: reserved mem: initialized node linux,meson-fb, compatible id shared-dma-pool
  11. [    0.000000@0] Reserved memory: created CMA memory pool at 0x77800000, size 128 MiB
  12. [    0.000000@0] OF: reserved mem: initialized node linux,ion-dev, compatible id shared-dma-pool
  13. [    0.000000@0] Reserved memory: created CMA memory pool at 0xf3000000, size 40 MiB
  14. [    0.000000@0] OF: reserved mem: initialized node linux,di_cma, compatible id shared-dma-pool
  15. [    0.000000@0] Reserved memory: regions without no-map are not yet supported
  16. [    0.000000@0] Reserved memory: created CMA memory pool at 0x64400000, size 308 MiB
  17. [    0.000000@0] OF: reserved mem: initialized node linux,codec_mm_cma, compatible id shared-dma-pool
  18. [    0.000000@0] OF: reserved mem: initialized node linux,codec_mm_reserved, compatible id amlogic, codec-mm-reserved
  19. [    0.000000@0] Reserved memory: created CMA memory pool at 0xef000000, size 64 MiB
  20. [    0.000000@0] OF: reserved mem: initialized node linux,vdin1_cma, compatible id shared-dma-pool
  21. [    0.000000@0] Reserved memory: created CMA memory pool at 0xed000000, size 32 MiB
  22. [    0.000000@0] OF: reserved mem: initialized node linux,vm0_cma, compatible id shared-dma-pool
  23. [    0.000000@0] cma: Reserved 8 MiB at 0xec800000
  24. [    0.000000@0] Memory policy: Data cache writealloc
  25. [    0.000000@0] On node 0 totalpages: 1005312
  26. [    0.000000@0] free_area_init_node: node 0, pgdat c182dbc0, node_mem_map ee149000
  27. [    0.000000@0]   Normal zone: 1534 pages used for memmap
  28. [    0.000000@0]   Normal zone: 0 pages reserved
  29. [    0.000000@0]   Normal zone: 196352 pages, LIFO batch:31
  30. [    0.000000@0]   HighMem zone: 808960 pages, LIFO batch:31
  31. [    0.000000@0] psci: probing for conduit method from DT.
  32. [    0.000000@0] psci: PSCIv1.0 detected in firmware.
  33. [    0.000000@0] psci: Using standard PSCI v0.2 function IDs
  34. [    0.000000@0] psci: MIGRATE_INFO_TYPE not supported.
  35. [    0.000000@0] psci: SMC Calling Convention v1.1
  36. [    0.000000@0] percpu: Embedded 15 pages/cpu @ee0d0000 s32140 r8192 d21108 u61440
  37. [    0.000000@0] pcpu-alloc: s32140 r8192 d21108 u61440 alloc=15*4096
  38. [    0.000000@0] pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3
  39. [    0.000000@0] Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 1003778
  40. [    0.000000@0] Kernel command line: init=/init console=ttyS0,115200 no_console_suspend earlyprintk=aml-uart,0xff803000 ramoops.pstore_en=1 ramoops.record_size=0x8000 ramoops.console_size=0x4000 otg_device=1 reboot_mode_android=normal logo=osd0,loaded,0x3d800000 vout=1080p60hz,enable panel_type=lcd_1 hdmitx=,444,12bit hdmimode=1080p60hz frac_rate_policy=1 hdmi_read_edid=1 cvbsmode=576cvbs osd_reverse=0 video_reverse=0 irq_check_en=0 androidboot.selinux=permissive androidboot.firstboot=0 jtag=disable androidboot.hardware=amlogic androidboot.serialno=1234567890 rootfstype=ramfs aml_dt=sm1_ac213_4g recovery_part={recovery_part} recovery_offset={recovery_offset} androidboot.dtbo_idx=0 buildvariant=eng buildvariant=eng
  41. [    0.000000@0] fb: osd0
  42. [    0.000000@0] fb: loaded
  43. [    0.000000@0] fb: 0x3d800000
  44. [    0.000000@0] vout: 1080p60hz
  45. [    0.000000@0] vout: enable: 1
  46. [    0.000000@0] lcd: panel_type: lcd_1
  47. [    0.000000@0] vout: get hdmimode: 1080p60hz
  48. [    0.000000@0] hdmitx: hdmitx boot frac_rate_policy: 1
  49. [    0.000000@0] vout: get cvbsmode: 576cvbs
  50. [    0.000000@0] vpp_axis_reverse: bootargs is 0
  51. [    0.000000@0] DI: di_read_canvas_reverse: bootargs is 0.
  52. [    0.000000@0] phlock_phase_config: bootargs is 0.
  53. [    0.000000@0] jtag: jtag select disable
  54. [    0.000000@0] PID hash table entries: 4096 (order: 2, 16384 bytes)
  55. [    0.000000@0] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
  56. [    0.000000@0] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
  57. [    0.000000@0] Memory: 3342580K/4021248K available (14336K kernel code, 1269K rwdata, 4888K rodata, 1024K init, 1342K bss, 72460K reserved, 606208K cma-reserved, 2633728K highmem)
  58. [    0.000000@0] Virtual kernel memory layout:
  59. [    0.000000@0]     vector  : 0xffff0000 - 0xffff1000   (   4 kB)
  60. [    0.000000@0]     fixmap  : 0xffc00000 - 0xfff00000   (3072 kB)
  61. [    0.000000@0]     vmalloc : 0xf0800000 - 0xff800000   ( 240 MB)
  62. [    0.000000@0]     lowmem  : 0xc0000000 - 0xf0000000   ( 768 MB)
  63. [    0.000000@0]     pkmap   : 0xbfe00000 - 0xc0000000   (   2 MB)
  64. [    0.000000@0]     modules : 0xbc000000 - 0xbfe00000   (  62 MB)
  65. [    0.000000@0]       .text : 0xc0108000 - 0xc1000000   (15328 kB)
  66. [    0.000000@0]       .init : 0xc1600000 - 0xc1700000   (1024 kB)
  67. [    0.000000@0]       .data : 0xc1700000 - 0xc183d778   (1270 kB)
  68. [    0.000000@0]        .bss : 0xc183f000 - 0xc198ebc4   (1343 kB)
  69. [    0.000000@0]  0, addr:c0bed060 +  154, aml_cma_alloc_post_hook
  70. [    0.000000@0]  1, addr:c069f578 +   4c, dma_alloc_from_contiguous
  71. [    0.000000@0]  2, addr:c0398428 +  27c, cma_alloc
  72. [    0.000000@0]  3, addr:c0392960 +  2f4, __kmalloc_track_caller
  73. [    0.000000@0]  4, addr:c038fc14 +  298, kmem_cache_alloc
  74. [    0.000000@0]  5, addr:c038f8c0 +  2b0, kmem_cache_alloc_trace
  75. [    0.000000@0]  6, addr:c038f5cc +  2f4, __kmalloc
  76. [    0.000000@0]  7, addr:c038f55c +   70, __slab_alloc.constprop.10
  77. [    0.000000@0]  8, addr:c038f1e8 +  374, ___slab_alloc.constprop.11
  78. [    0.000000@0]  9, addr:c038d18c +  3ac, new_slab
  79. [    0.000000@0] 10, addr:c038153c +   44, vmalloc
  80. [    0.000000@0] 11, addr:c03814f8 +   44, vzalloc
  81. [    0.000000@0] 12, addr:c0380f5c +  258, __vmalloc_node_range
  82. [    0.000000@0] 13, addr:c0368000 +  114, kmalloc_order_trace
  83. [    0.000000@0] 14, addr:c0367eac +  154, kmalloc_order
  84. [    0.000000@0] 15, addr:c034a38c +  164, __alloc_page_frag
  85. [    0.000000@0] 16, addr:c034a348 +   44, alloc_pages_exact
  86. [    0.000000@0] 17, addr:c034a324 +   24, get_zeroed_page
  87. [    0.000000@0] 18, addr:c034a2e8 +   3c, __get_free_pages
  88. [    0.000000@0] 19, addr:c0349360 +  f88, __alloc_pages_nodemask
  89. [    0.000000@0] 20, addr:c0219760 +   4c, cma_allocator_alloc
  90. [    0.000000@0] 21, addr:c0219678 +   e8, __alloc_from_contiguous
  91. [    0.000000@0] 22, addr:c0219200 +   58, arm_dma_alloc
  92. [    0.000000@0] 23, addr:c0218e68 +  34c, __dma_alloc
  93. [    0.000000@0] zone:Normal, spaned pages:196352, total:196352
  94. [    0.000000@0] zone:HighMem, spaned pages:808960, total:1005312
  95. [    0.000000@0] page_trace_pre_work, trace buffer:edc00000, size:3d6000, used:edfd6000, end:ee000000
  96. [    0.000000@0] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
  97. [    0.000000@0] Preemptible hierarchical RCU implementation.
  98. [    0.000000@0]    Build-time adjustment of leaf fanout to 32.
  99. [    0.000000@0]    RCU restricting CPUs from NR_CPUS=8 to nr_cpu_ids=4.
  100. [    0.000000@0] RCU: Adjusting geometry for rcu_fanout_leaf=32, nr_cpu_ids=4
  101. [    0.000000@0] NR_IRQS:16 nr_irqs:16 16
  102. [    0.000000@0] irq_meson_gpio: 100 to 8 gpio interrupt mux initialized
  103. [    0.000000@0] g12a_aoclkc_init: register ao clk ok!
  104. [    0.000000@0] Meson chip version = RevC (2B:C - 10:0)
  105. [    0.000000@0] meson_g12a_sdemmc_init: register amlogic sdemmc clk
  106. [    0.000000@0] meson_g12a_sdemmc_init: register amlogic sdemmc clk
  107. [    0.000000@0] meson_g12a_gpu_init: register meson gpu clk
  108. [    0.000000@0] meson_g12a_media_init: register meson media clk
  109. [    0.000000@0] meson_g12a_misc_init: register amlogic g12a misc clks
  110. [    0.000000@0] meson_g12a_misc_init: done.
  111. [    0.000000@0] g12a_clkc_init initialization complete
  112. [    0.000000@0] sm1 clk probe ok
  113. [    0.000000@0] arm_arch_timer: Architected cp15 timer(s) running at 24.00MHz (virt).
  114. [    0.000000@0] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x588fe9dc0, max_idle_ns: 440795202592 ns
  115. [    0.000006@0] sched_clock: 56 bits at 24MHz, resolution 41ns, wraps every 4398046511097ns
  116. [    0.000019@0] Switching to timer-based delay loop, resolution 41ns
  117. [    0.000059@0] meson_bc_timer: mclk->mux_reg =f080c190,mclk->reg =f080e194
  118. [    0.000685@0] Console: colour dummy device 80x30
  119. [    0.000710@0] Calibrating delay loop (skipped), value calculated using timer frequency.. 48.00 BogoMIPS (lpj=96000)
  120. [    0.000727@0] pid_max: default: 32768 minimum: 301
  121. [    0.000807@0] thread_stack_cache_init, vmap:c0127900, bitmap:c012c400, cache page:ec400
  122. [    0.000819@0] thread_stack_cache_init, allocation vm area:c0129040, addr:bc000000, size:3001000
  123. [    0.000876@0] Security Framework initialized
  124. [    0.000886@0] SELinux:  Initializing.
  125. [    0.000931@0] SELinux:  Starting in permissive mode
  126. [    0.000973@0] Mount-cache hash table entries: 2048 (order: 1, 8192 bytes)
  127. [    0.000987@0] Mountpoint-cache hash table entries: 2048 (order: 1, 8192 bytes)
  128. [    0.001744@0] CPU: Testing write buffer coherency: ok
  129. [    0.001786@0] ftrace: allocating 44152 entries in 130 pages
  130. [    0.086832@0] sched-energy: CPU device node has no sched-energy-costs
  131. [    0.086851@0] CPU0: update cpu_capacity 1024
  132. [    0.086859@0] CPU0: thread 0, cpu 0, socket 0, mpidr 81000000
  133. [    0.086889@0] Setting up static identity map for 0x200000 - 0x200058
  134. [    0.130290@0] secmon: can't fine clear_range
  135. [    0.179515@1] CPU1: update cpu_capacity 1024
  136. [    0.179520@1] CPU1: thread 0, cpu 1, socket 0, mpidr 81000100
  137. [    0.211606@2] CPU2: update cpu_capacity 1024
  138. [    0.211611@2] CPU2: thread 0, cpu 2, socket 0, mpidr 81000200
  139. [    0.243727@3] CPU3: update cpu_capacity 1024
  140. [    0.243732@3] CPU3: thread 0, cpu 3, socket 0, mpidr 81000300
  141. [    0.243836@0] Brought up 4 CPUs
  142. [    0.243864@0] SMP: Total of 4 processors activated (192.00 BogoMIPS).
  143. [    0.243870@0] CPU: All CPU(s) started in SVC mode.
  144. [    0.244773@0] addr:bc045cce is in kernel, size fix 4096->10, data:mode=0755
  145. [    0.244902@0] devtmpfs: initialized
  146. [    0.272716@0] VFP support v0.3: implementor 41 architecture 3 part 40 variant 5 rev 2
  147. [    0.273218@0] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns
  148. [    0.273241@0] futex hash table entries: 1024 (order: 4, 65536 bytes)
  149. [    0.273430@0] pinctrl core: initialized pinctrl subsystem
  150. [    0.274629@0] NET: Registered protocol family 16
  151. [    0.277702@0] DMA: preallocated 256 KiB pool for atomic coherent allocations
  152. [    0.277712@0] schedtune: init normalization constants...
  153. [    0.277719@0] schedtune: no energy model data
  154. [    0.277725@0] schedtune: disabled!
  155. [    0.291418@0] cpuidle: using governor menu
  156. [    0.291541@0] register canvas platform driver
  157. [    0.291588@0] register rdma platform driver
  158. [    0.291633@0] aml_vdac_init: module init
  159. [    0.294560@0] clkmsr: clkmsr: driver init
  160. [    0.294569@0] codec_mm_module_init
  161. [    0.294616@0] media_configs_system_init
  162. [    0.295150@0] pstore: using zlib compression
  163. [    0.295820@0] console [pstore-1] enabled
  164. [    0.295861@0] pstore: Registered ramoops as persistent store backend
  165. [    0.295872@0] ramoops: attached 0x100000@0x7400000, ecc: 0/0
  166. [    0.295883@0] ramoops: ramoops_io_en:0 1 old:0x0 ftrace_size:0x40000
  167. [    0.298004@0] aml_iomap: amlogic iomap probe done
  168. [    0.298590@0] vpu: driver version: v20190314(10-sm1)
  169. [    0.298603@0] vpu: load vpu_clk: 666666667Hz(7)
  170. [    0.298805@0] vpu: clktree_init
  171. [    0.298884@0] vpu: vpu_probe OK
  172. [    0.303448@0] clkmsr: msr_clk_reg0=f09c0004,msr_clk_reg2=f09c200c
  173. [    0.303532@0] clkmsr: msr_ring_reg0=f09c45fc
  174. [    0.310494@0] aml_vdac_probe:probe start.cpu_id:8,name:meson-sm1-vdac
  175. [    0.310724@0] aml_vdac_probe: ok
  176. [    0.310888@0] canvas_probe reg=ff638000,size=2000
  177. [    0.310912@0] canvas maped reg_base =f09c6000
  178. [    0.319770@0] rdma_probe,cpu_type:1, ver:0, len:8
  179. [    0.320008@0] rdma_register, rdma_table_addr f09e9000 rdma_table_addr_phy ec840000 reg_buf ed700000
  180. [    0.320020@0] rdma_register success, handle 1 table_size 32768
  181. [    0.320028@0] set_rdma_handle video rdma handle = 1.
  182. [    0.321360@0] aml_snd_reg_map[0], reg:ff661000, size:400
  183. [    0.321384@0] aml_snd_reg_map[1], reg:ff660000, size:1000
  184. [    0.321402@0] aml_snd_reg_map[2], reg:ff661400, size:400
  185. [    0.321420@0] aml_snd_reg_map[3], reg:ff662000, size:1000
  186. [    0.321439@0] aml_snd_reg_map[4], reg:ffd01000, size:1000
  187. [    0.321459@0] aml_snd_reg_map[5], reg:ff661800, size:400
  188. [    0.321480@0] aml_snd_reg_map[6], reg:ff663800, size:30
  189. [    0.321499@0] aml_snd_reg_map[7], reg:ff663c00, size:20
  190. [    0.321519@0] aml_snd_reg_map[8], reg:ff663e00, size:10
  191. [    0.321528@0] amlogic auge_snd_iomap probe done
  192. [    0.323848@0] cvbs_out: cvbsout_probe, cpu_id:7,name:meson-sm1-cvbsout
  193. [    0.323871@0] cvbs_out: clk path:0
  194. [    0.323881@0] cvbs_out: error: failed to get vdac_config
  195. [    0.324031@0] vout: vout1: register server: cvbs_vout_server
  196. [    0.324040@0] cvbs_out: register cvbs module server ok
  197. [    0.324049@0] vout: vout2: register server: cvbs_vout2_server
  198. [    0.324058@0] cvbs_out: register cvbs module vout2 server ok
  199. [    0.324070@0] cvbs_out: chrdev devno 264241152 for disp
  200. [    0.324340@0] cvbs_out: create cdev cvbs
  201. [    0.324350@0] cvbs_out: cvbsout_probe OK
  202. [    0.325052@0] codec_mm codec_mm: assigned reserved memory node linux,codec_mm_cma
  203. [    0.325153@0] codec_mm codec_mm: assigned reserved memory node linux,codec_mm_cma
  204. [    0.325162@0] codec_mm_probe ok
  205. [    0.582507@0] vgaarb: loaded
  206. [    0.582860@0] SCSI subsystem initialized
  207. [    0.583175@0] usbcore: registered new interface driver usbfs
  208. [    0.583249@0] usbcore: registered new interface driver hub
  209. [    0.583375@0] usbcore: registered new device driver usb
  210. [    0.583595@0] Linux video capture interface: v2.00
  211. [    0.583725@0] pps_core: LinuxPPS API ver. 1 registered
  212. [    0.583735@0] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
  213. [    0.583774@0] PTP clock support registered
  214. [    0.584656@0] secmon: reserve_mem_size:0x300000
  215. [    0.584756@0] secmon secmon: assigned reserved memory node linux,secmon
  216. [    0.585125@0] secmon: get page:ee1e7000, 5000
  217. [    0.585139@0] secmon: share in base: 0xc50fe000, share out base: 0xc50ff000
  218. [    0.585149@0] secmon: phy_in_base: 0x50fe000, phy_out_base: 0x50ff000
  219. [    0.585679@0] fb: osd_init_module
  220. [    0.586181@0] fb: viu vsync irq: 59
  221. [    0.586202@0] fb: viu2 vsync irq: 67
  222. [    0.586329@0] 0x000000d8:Y=d8,U=0,V=0
  223. [    0.586339@0] 0x000000d9:Y=d9,U=0,V=0
  224. [    0.586347@0] 0x000000da:Y=da,U=0,V=0
  225. [    0.586356@0] 0x000000db:Y=db,U=0,V=0
  226. [    0.586365@0] 0x000000dc:Y=dc,U=0,V=0
  227. [    0.586373@0] 0x000000dd:Y=dd,U=0,V=0
  228. [    0.586781@0] fb: osd_rdma_init: rdma_table p=0xec848000,op=0xec848000 , v=0xf0ad3000
  229. [    0.586829@0] rdma_register, rdma_table_addr f0ad5000 rdma_table_addr_phy ec849000 reg_buf ed7d3000
  230. [    0.586841@0] rdma_register success, handle 2 table_size 4096
  231. [    0.586851@0] fb: osd_rdma_init:osd rdma handle = 2.
  232. [    0.586871@0] fb: mem_size: 0x800000
  233. [    0.586879@0] fb: mem_size: 0x1980000
  234. [    0.586886@0] fb: mem_size: 0x100000
  235. [    0.586893@0] fb: mem_size: 0x100000
  236. [    0.586901@0] fb: mem_size: 0x800000
  237. [    0.586963@0] meson-fb fb: assigned reserved memory node linux,meson-fb
  238. [    0.586973@0] fb: reserved memory base:0x7f800000, size:800000
  239. [    0.587379@0] vout: error: invalid vinfo1. current vmode is not supported
  240. [    0.587393@0] fb: init fbdev bpp is:32
  241. [    0.589058@0] fb: set osd0 reverse as NONE
  242. [    0.589118@0] vout: error: invalid vinfo1. current vmode is not supported
  243. [    0.590180@0] fb: osd probe OK
  244. [    0.591031@0] hdmitx: system: amhdmitx_probe start
  245. [    0.591042@0] hdmitx: system: Ver: 20190624
  246. [    0.591079@0] hdmitx: system: hdmitx_device.chip_type : 12
  247. [    0.591119@0] hdmitx: system: not find product desc
  248. [    0.591128@0] hdmitx: system: not find match pwr-ctl
  249. [    0.591173@0] hdmitx: system: not find drm_amhdmitx
  250. [    0.591204@0] hdmitx: system: hpd irq = 52
  251. [    0.591310@0] hdmitx: system: hdcp22_tx_skp failed to probe
  252. [    0.591322@0] hdmitx: system: hdcp22_tx_esm failed to probe
  253. [    0.591811@0] vout: vout1: register server: hdmitx_vout_server
  254. [    0.591825@0] vout: vout2: register server: hdmitx_vout2_server
  255. [    0.592582@0] hdmitx: hdmitx20: Mapped PHY: 0xffd00000
  256. [    0.592608@0] hdmitx: hdmitx20: Mapped PHY: 0xff634400
  257. [    0.592627@0] hdmitx: hdmitx20: Mapped PHY: 0xff900000
  258. [    0.592641@0] hdmitx: hdmitx20: Mapped PHY: 0xff800000
  259. [    0.592662@0] hdmitx: hdmitx20: Mapped PHY: 0xff63c000
  260. [    0.592671@0] hdmitx: hdmitx20: Mapped PHY: 0xffd00000
  261. [    0.592680@0] hdmitx: hdmitx20: Mapped PHY: 0xff608000
  262. [    0.592689@0] hdmitx: hdmitx20: Mapped PHY: 0xff600000
  263. [    0.592701@0] hdmitx: hdmitx20: Mapped PHY: 0xffe01000
  264. [    0.592717@0] hdmitx: hw: alread display in uboot 0x10
  265. [    0.592751@0] hdmitx: hw: avmute set to 1
  266. [    0.592763@0] hdmitx: system: fmt_attr 444,12bit
  267. [    0.592868@0] hdmitx: system: amhdmitx_probe end
  268. [    0.593358@0] hdmitx: system: irq 80000002 0
  269. [    0.593701@0] lcd: driver version: 20181012(8-sm1)
  270. [    0.593855@0] lcd: detect mode: tablet, fr_auto_policy: 0, key_valid: 0
  271. [    0.594101@0] lcd: lcd_clktree_probe
  272. [    0.594113@0] lcd: status: 0
  273. [    0.594126@0] vout: vout1: register server: lcd_vout_server
  274. [    0.594137@0] vout: vout2: register server: lcd_vout2_server
  275. [    0.594148@0] lcd: lcd_get_config from dts
  276. [    0.594165@0] lcd: no range_setting
  277. [    0.594219@0] lcd: P070ACB_FT, mipi, 8bit, 600x1024
  278. [    0.594239@0] lcd: pixel_clk = 49.434MHz, bit_rate = 395.472MHz
  279. [    0.594557@0] lcd: lcd_fops_create OK
  280. [    0.594569@0] vout: error: invalid vinfo1. current vmode is not supported
  281. [    0.594579@0] fb: current vmode=invalid, cmd: 0x20000
  282. [    0.594603@0] lcd: request lcd_vsync_irq successful
  283. [    0.594621@0] lcd: request lcd_vsync2_irq successful
  284. [    0.594629@0] lcd: lcd_probe ok
  285. [    0.595067@0] vout: create vout attribute OK
  286. [    0.595230@0] vout: vout_fops_create OK
  287. [    0.595240@0] vout: vout1: register server: nulldisp_vout_server
  288. [    0.595366@0] vout: tvout monitor interval:500(ms), timeout cnt:20
  289. [    0.595393@0] hdmitx: hdmitx_set_current_vmode[3688]
  290. [    0.595402@0] hdmitx: system: recalc before 1080p60hz 60 1
  291. [    0.595413@0] hdmitx: system: recalc after 1080p60hz 2997 50
  292. [    0.595421@0] hdmitx: alread display in uboot
  293. [    0.595428@0] vout: init mode 1080p60hz set ok
  294. [    0.595436@0] vout: aml_tvout_mode_monitor
  295. [    0.595454@0] vout: aml_vout_probe OK
  296. [    0.596217@0] chip type:0x2b
  297. [    0.596631@0] NO valid ramdump args:0 0
  298. [    0.601109@3] Advanced Linux Sound Architecture Driver Initialized.
  299. [    0.602060@3] Bluetooth: Core ver 2.22
  300. [    0.602197@3] NET: Registered protocol family 31
  301. [    0.602211@3] Bluetooth: HCI device and connection manager initialized
  302. [    0.602234@3] Bluetooth: HCI socket layer initialized
  303. [    0.602249@3] Bluetooth: L2CAP socket layer initialized
  304. [    0.602297@3] Bluetooth: SCO socket layer initialized
  305. [    0.603124@3] NetLabel: Initializing
  306. [    0.603145@3] NetLabel:  domain hash size = 128
  307. [    0.603154@3] NetLabel:  protocols = UNLABELED CIPSOv4
  308. [    0.603245@3] NetLabel:  unlabeled traffic allowed by default
  309. [    0.607804@3] clocksource: Switched to clocksource arch_sys_counter
  310. [    0.691134@3] VFS: Disk quotas dquot_6.6.0
  311. [    0.691272@3] VFS: Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
  312. [    0.707553@1] dtv_dmd:[amldtvdemod..]aml_dtvdemod_init.
  313. [    0.707586@1] jtag: module init
  314. [    0.708220@1] jtag: ao gpios not specified
  315. [    0.708255@1] jtag: probe of jtag failed with error -22
  316. [    0.708899@1] NET: Registered protocol family 2
  317. [    0.709958@1] TCP established hash table entries: 8192 (order: 3, 32768 bytes)
  318. [    0.710031@1] TCP bind hash table entries: 8192 (order: 4, 65536 bytes)
  319. [    0.710112@1] TCP: Hash tables configured (established 8192 bind 8192)
  320. [    0.710233@1] UDP hash table entries: 512 (order: 2, 16384 bytes)
  321. [    0.710284@1] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
  322. [    0.710497@1] NET: Registered protocol family 1
  323. [    0.710547@1] PCI: CLS 0 bytes, default 64
  324. [    0.714132@1] wifi: power_on_pin_OD = 0;
  325. [    0.714184@1] aml_wifi wifi: [wifi_dev_probe] no power_on_pin2
  326. [    0.714473@1] aml_wifi wifi: [pwm_double_channel_conf_dt] wifi pwm dt ok
  327. [    0.714515@1] aml_wifi wifi: [pwm_double_channel_conf] wifi pwm conf ok
  328. [    0.714529@1] aml_wifi wifi: [wifi_dev_probe] dhd_static_buf setup
  329. [    0.714542@1] Wifi: bcmdhd_init_wlan_mem: bcmdhd_init_wlan_mem 1.579.77.41.9
  330. [    0.715404@1] Wifi: bcmdhd_init_wlan_mem: bcmdhd_init_wlan_mem prealloc ok
  331. [    0.715422@1] aml_wifi wifi: [wifi_dev_probe] interrupt_pin=483
  332. [    0.715433@1] aml_wifi wifi: [wifi_dev_probe] irq_num=0, irq_trigger_type=1
  333. [    0.715444@1] aml_wifi wifi: [wifi_dev_probe] power_on_pin=482
  334. [    0.715454@1] aml_wifi wifi: [wifi_dev_probe] clock_32k_pin=0
  335. [    0.715911@1] aml_wifi wifi: [wifi_setup_dt] wifi_setup_dt
  336. [    0.716098@1] aml_wifi wifi: [wifi_setup_dt] irq num is:(84)
  337. [    0.716113@1] aml_wifi wifi: [wifi_setup_dt] interrupt_pin(483)
  338. [    0.716144@1] aml_wifi wifi: [wifi_setup_dt] power_on_pin(482)
  339. [    0.716789@1] Trying to unpack rootfs image as initramfs...
  340. [    0.750862@0] clear:29400000, free:29400000, tick:149901 us
  341. [    1.112052@0] hdmitx: system: plugin
  342. [    1.244443@0] hdmitx: edid: EDID Parser:
  343. [    1.244466@0] hdmitx: hdmitx: reach vesa idx MAX
  344. [    1.244474@0] hdmitx: hdmitx: reach vesa idx MAX
  345. [    1.244483@0] hdmitx: hdmitx: reach vesa idx MAX
  346. [    1.244499@0] hdmitx: hdmitx: reach vesa idx MAX
  347. [    1.244509@0] hdmitx: hdmitx: reach vesa idx MAX
  348. [    1.244517@0] hdmitx: hdmitx: reach vesa idx MAX
  349. [    1.244527@0] hdmitx: hdmitx: reach vesa idx MAX
  350. [    1.244536@0] hdmitx: hdmitx: reach vesa idx MAX
  351. [    1.244544@0] hdmitx: hdmitx: reach vesa idx MAX
  352. [    1.244564@0] hdmitx: edid: get dtd0 vic: 20
  353. [    1.244574@0] hdmitx: hdmitx: get PMT vic: 16
  354. [    1.244584@0] hdmitx: edid: find IEEEOUT
  355. [    1.244626@0] hdmitx: edid: check sum valid
  356. [    1.244633@0] hdmitx: edid: check sum valid
  357. [    1.244646@0] hdmitx: edid: update rx hdr info 0 at edid parsing
  358. [    1.244657@0] hdmitx: edid: check sum valid
  359. [    1.244666@0] hdmitx: edid: check sum valid
  360. [    1.244677@0] hdmitx: edid: blk0 raw data
  361. [    1.244718@0] hdmitx: edid:
  362. [    1.244718@0] 00ffffffffffff004c2d1606000000001414010380331d780aee91a3544c9926
  363. [    1.244718@0] 0f5054bfef80714f8100814081809500950fb3000101023a801871382d40582c
  364. [    1.244718@0] 4500fe221100001e023a80d072382d40102c4580fe221100001e000000fd0018
  365. [    1.244718@0] 4b1a5117000a202020202020000000fc0053796e634d61737465720a202001af
  366. [    1.244718@0]
  367. [    1.244718@0]
  368. [    1.244738@0] hdmitx: edid: blk1 raw data
  369. [    1.244778@0] hdmitx: edid:
  370. [    1.244778@0] 02031ef14d930405140312101f20212207162309070767030c001000b82d011d
  371. [    1.244778@0] 80d0721c1620102c2580a05a0000001e011d8018711c1620582c2500a05a0000
  372. [    1.244778@0] 001e011d007251d01e206e285500a05a0000001e8c0ad090204031200c405500
  373. [    1.244778@0] a05a0000001e8c0ad08a20e02d10103e9600a05a0000001e00000000000000a6
  374. [    1.244778@0]
  375. [    1.244778@0]
  376. [    1.244800@0] hdmitx: system: update physcial size: 510 290
  377. [    1.244812@0] hdmitx: hw: set audio
  378. [    1.244824@0] hdmitx: hw: hdmitx tx_aud_src = 0
  379. [    1.244847@0] hdmitx: fs = 0, cd = 6, tmds_clk = 0
  380. [    1.244857@0] hdmitx: hw: aud_n_para = 6144
  381. [    1.244872@0] hdmitx: hw: set channel status
  382. [    1.274215@1] Freeing initrd memory: 14492K
  383. [    1.277042@1] enable_pmuserenr_all() start
  384. [    1.277062@1] enable_pmuserenr_all() end
  385. [    1.277086@1] hw perfevents: clusterb_enabled = 0
  386. [    1.277097@1] hw perfevents: cpumasks 0xf, 0x0
  387. [    1.277131@1] hw perfevents: cluster A irq = 25
  388. [    1.277223@1] hw perfevents: enabled with armv7_cortex_a15 PMU driver, 7 counters available
  389. [    1.281052@1] audit: initializing netlink subsys (disabled)
  390. [    1.281122@1] audit: type=2000 audit(1.220:1): initialized
  391. [    1.282135@1] workingset: timestamp_bits=30 max_order=20 bucket_order=0
  392. [    1.291520@1] squashfs: version 4.0 (2009/01/31) Phillip Lougher
  393. [    1.291882@1] exFAT: Version 1.2.9
  394. [    1.293201@1] Registering sdcardfs 0.1
  395. [    1.293461@1] ntfs: driver 2.1.32 [Flags: R/O].
  396. [    1.293807@1] jffs2: version 2.2. (NAND) (SUMMARY)  © 2001-2006 Red Hat, Inc.
  397. [    1.294648@1] fuse init (API version 7.26)
  398. [    1.295517@1] SELinux:  Registering netfilter hooks
  399. [    1.301018@1] NET: Registered protocol family 38
  400. [    1.301039@1] Key type asymmetric registered
  401. [    1.301050@1] Asymmetric key parser 'x509' registered
  402. [    1.301247@1] bounce: pool size: 64 pages
  403. [    1.301500@1] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 242)
  404. [    1.301513@1] io scheduler noop registered (default)
  405. [    1.301522@1] io scheduler deadline registered
  406. [    1.301551@1] io scheduler cfq registered
  407. [    1.314052@2] random: fast init done
  408. [    1.314107@2] random: crng init done
  409. [    1.326373@1] brd: module loaded
  410. [    1.333565@1] loop: module loaded
  411. [    1.334390@1] zram: Added device: zram0
  412. [    1.334768@1] mtdoops: mtd device (mtddev=name/number) must be supplied
  413. [    1.335859@1] libphy: Fixed MDIO Bus: probed
  414. [    1.336201@1] tun: Universal TUN/TAP device driver, 1.6
  415. [    1.336211@1] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
  416. [    1.337035@1]  REG0:Addr = f0e9c540
  417. [    1.337058@1] MAC wol not set
  418. [    1.337069@1] wzh pll 9c0040a 927e0000 ac5f49e5
  419. [    1.337311@1] wzh analog 20200000 c000 23
  420. [    1.347667@1] meson6-dwmac ff3f0000.ethernet: no reset control found
  421. [    1.347681@1] stmmac - user ID: 0x11, Synopsys ID: 0x37
  422. [    1.347691@1]  Ring mode enabled
  423. [    1.347700@1]  DMA HW capability register supported
  424. [    1.347708@1]  Normal descriptors
  425. [    1.347717@1]  RX Checksum Offload Engine supported
  426. [    1.347726@1]    COE Type 2
  427. [    1.347734@1]  TX Checksum insertion supported
  428. [    1.347743@1]  Wake-Up On Lan supported
  429. [    1.347847@1]  Enable RX Mitigation via HW Watchdog Timer
  430. [    1.350818@1] libphy: stmmac: probed
  431. [    1.350836@1] eth%d: PHY ID 01803301 at 8 IRQ POLL (stmmac-0:08) active
  432. [    1.352607@1] PPP generic driver version 2.4.2
  433. [    1.352860@1] PPP BSD Compression module registered
  434. [    1.352872@1] PPP Deflate Compression module registered
  435. [    1.352913@1] PPP MPPE Compression module registered
  436. [    1.352924@1] NET: Registered protocol family 24
  437. [    1.353035@1] usbcore: registered new interface driver asix
  438. [    1.353158@1] usbcore: registered new interface driver ax88179_178a
  439. [    1.353226@1] usbcore: registered new interface driver cdc_ether
  440. [    1.353290@1] usbcore: registered new interface driver net1080
  441. [    1.353356@1] usbcore: registered new interface driver cdc_subset
  442. [    1.353422@1] usbcore: registered new interface driver zaurus
  443. [    1.353501@1] usbcore: registered new interface driver cdc_ncm
  444. [    1.354241@1] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
  445. [    1.354253@1] ehci-pci: EHCI PCI platform driver
  446. [    1.354323@1] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
  447. [    1.354354@1] ohci-pci: OHCI PCI platform driver
  448. [    1.355040@1] usbcore: registered new interface driver cdc_acm
  449. [    1.355051@1] cdc_acm: USB Abstract Control Model driver for USB modems and ISDN adapters
  450. [    1.355130@1] usbcore: registered new interface driver usb-storage
  451. [    1.355271@1] usbcore: registered new interface driver usbserial
  452. [    1.355746@1] mousedev: PS/2 mouse device common for all mice
  453. [    1.356099@1] usbcore: registered new interface driver xpad
  454. [    1.356313@1] i2c /dev entries driver
  455. [    1.356587@1] IR NEC protocol handler initialized
  456. [    1.356598@1] IR RC5(x/sz) protocol handler initialized
  457. [    1.356607@1] IR RC6 protocol handler initialized
  458. [    1.356616@1] IR JVC protocol handler initialized
  459. [    1.356624@1] IR Sony protocol handler initialized
  460. [    1.356633@1] IR SANYO protocol handler initialized
  461. [    1.356641@1] IR Sharp protocol handler initialized
  462. [    1.356649@1] IR MCE Keyboard/mouse protocol handler initialized
  463. [    1.356658@1] IR XMP protocol handler initialized
  464. [    1.356761@1] usbcore: registered new interface driver uvcvideo
  465. [    1.356770@1] USB Video Class driver (1.1.1)
  466. [    1.356860@1] usbcore: registered new interface driver cx231xx
  467. [    1.356873@1] md: linear personality registered for level -1
  468. [    1.357500@1] device-mapper: ioctl: 4.35.0-ioctl (2016-06-23) initialised: dm-devel@redhat.com
  469. [    1.357683@1] device-mapper: verity-avb: AVB error handler initialized with vbmeta device:
  470. [    1.357727@1] Bluetooth: HCI UART driver ver 2.3
  471. [    1.357741@1] Bluetooth: HCI UART protocol H4 registered
  472. [    1.358065@1] cpuidle: enable-method property 'psci' found operations
  473. [    1.358220@1] cpuidle: enable-method property 'psci' found operations
  474. [    1.358348@1] cpuidle: enable-method property 'psci' found operations
  475. [    1.358475@1] cpuidle: enable-method property 'psci' found operations
  476. [    1.359599@1] ledtrig-cpu: registered to indicate activity on CPUs
  477. [    1.360109@1] hidraw: raw HID events driver (C) Jiri Kosina
  478. [    1.364499@1] usbcore: registered new interface driver usbhid
  479. [    1.364516@1] usbhid: USB HID core driver
  480. [    1.364771@1] ashmem: initialized
  481. [    1.366098@1] value of voltage_tolerance 0
  482. [    1.367384@1] cpu cpu0: meson_cpufreq_init: CPU 0 initialized
  483. [    1.368126@1] meson_cpufreq_probe: Registered platform drive
  484. [    1.368337@1] ff803000.serial: clock gate not found
  485. [    1.368381@1] meson_uart ff803000.serial: ==uart0 reg addr = f0eb1000
  486. [    1.368441@1] ff803000.serial: ttyS0 at MMIO 0xff803000 (irq = 36, base_baud = 1500000) is a meson_uart
  487. [    1.368459@1] meson_uart ff803000.serial: ttyS0 use xtal(24M) 24000000 change 0 to 115200
  488. [    3.810692@1] console [ttyS0] enabled
  489. [    3.815165@1] meson_uart ffd24000.serial: ==uart1 reg addr = f0eb3000
  490. [    3.820786@1] ffd24000.serial: ttyS1 at MMIO 0xffd24000 (irq = 51, base_baud = 1500000) is a meson_uart
  491. [    3.831349@1] amlogic-new-usb2-v2 ffe09000.usb2phy: USB2 phy probe:phy_mem:0xffe09000, iomap phy_base:0xf0ed6000
  492. [    3.840845@1] amlogic-new-usb3-v2 ffe09080.usb3phy: USB3 phy probe:phy_mem:0xffe09080, iomap phy_base:0xf0ee1080
  493. [    3.852960@1] Error: Driver 'meson_reset' is already registered, aborting...
  494. [    3.857962@1] aml_dma ff63e000.aml_dma: Aml dma
  495. [    3.863031@1] aml_aes_dma ff63e000.aml_dma:aml_aes: Aml AES_dma
  496. [    3.868793@1] aml_sha_dma ff63e000.aml_dma:aml_sha: Aml SHA1/SHA224/SHA256 dma
  497. [    3.875358@1] meson-remote: Driver init
  498. [    3.878980@1] meson-remote: remote_probe
  499. [    3.882712@1] meson-remote ff808040.rc: protocol = 0x1
  500. [    3.887813@1] meson-remote ff808040.rc: led_blink = 1
  501. [    3.892835@1] meson-remote ff808040.rc: led_blink_frq  = 100
  502. [    3.898500@1] meson-remote ff808040.rc: platform_data irq =50
  503. [    3.904226@1] meson-remote ff808040.rc: custom_number = 3
  504. [    3.909590@1] meson-remote ff808040.rc: ptable->map_size = 50
  505. [    3.915281@1] meson-remote ff808040.rc: ptable->custom_name = amlogic-remote-1
  506. [    3.922479@1] meson-remote ff808040.rc: ptable->custom_code = 0xfb04
  507. [    3.928805@1] meson-remote ff808040.rc: ptable->release_delay = 80
  508. [    3.934975@1] meson-remote ff808040.rc: ptable->map_size = 53
  509. [    3.940677@1] meson-remote ff808040.rc: ptable->custom_name = amlogic-remote-2
  510. [    3.947869@1] meson-remote ff808040.rc: ptable->custom_code = 0xfe01
  511. [    3.954194@1] meson-remote ff808040.rc: ptable->release_delay = 80
  512. [    3.960365@1] meson-remote ff808040.rc: ptable->map_size = 17
  513. [    3.966068@1] meson-remote ff808040.rc: ptable->custom_name = amlogic-remote-3
  514. [    3.973261@1] meson-remote ff808040.rc: ptable->custom_code = 0xbd02
  515. [    3.979584@1] meson-remote ff808040.rc: ptable->release_delay = 80
  516. [    3.985747@1] meson-remote ff808040.rc: default protocol = 0x1 and id = 0
  517. [    3.992502@1] meson-remote ff808040.rc: reg=0x0, val=0x1f40190
  518. [    3.998307@1] meson-remote ff808040.rc: reg=0x4, val=0x12c00c8
  519. [    4.004113@1] meson-remote ff808040.rc: reg=0x8, val=0x960050
  520. [    4.009832@1] meson-remote ff808040.rc: reg=0xc, val=0x480028
  521. [    4.015553@1] meson-remote ff808040.rc: reg=0x10, val=0x70fa0013
  522. [    4.021533@1] meson-remote ff808040.rc: reg=0x18, val=0x8616800
  523. [    4.027426@1] meson-remote ff808040.rc: reg=0x1c, val=0x9f00
  524. [    4.033060@1] meson-remote ff808040.rc: reg=0x20, val=0x0
  525. [    4.038433@1] meson-remote ff808040.rc: reg=0x24, val=0x0
  526. [    4.043808@1] meson-remote ff808040.rc: reg=0x28, val=0x0
  527. [    4.049702@1] input: aml_keypad as /devices/platform/ff808040.rc/input/input0
  528. [    4.057047@1] meson-remote: IR XMP protocol handler initialized
  529. [    4.065014@1] ion_dev soc:ion_dev: assigned reserved memory node linux,ion-dev
  530. [    4.069924@1] ge2d: ge2d_init_module
  531. [    4.073230@1] ge2d: ge2d_dev major:235
  532. [    4.077042@1] ge2d: clock source clk_ge2d_gate ed56e600
  533. [    4.081886@1] ge2d: clock clk_ge2d source ed56ef00
  534. [    4.086630@1] ge2d: clock source clk_vapb_0 ed56e8c0
  535. [    4.091561@1] ge2d: ge2d init clock is 500000000 HZ, VPU clock is 666666656 HZ
  536. [    4.098846@1] ge2d: ge2d clock is 499 MHZ
  537. [    4.102758@1] ge2d: find address resource
  538. [    4.106744@1] ge2d: map io source 0xff940000,size=65536 to 0xf1010000
  539. [    4.113146@1] ge2d: reserved mem init failed
  540. [    4.117385@1] ge2d: ge2d: pdev=ed6de000, irq=58, clk=ed56e600
  541. [    4.123160@1] ge2d: ge2d start monitor
  542. [    4.126922@2] ge2d: ge2d workqueue monitor start
  543. [    4.127378@1] [tsync_pcr_init]init success.
  544. [    4.127581@1] amvideom vsync irq: 59
  545. [    4.128267@1] hdmitx: hdcp: hdmitx_hdcp_init
  546. [    4.128807@1] vout: vout2: create vout2 attribute OK
  547. [    4.128927@1] vout: vout2: vout2_fops_create OK
  548. [    4.129094@1] vout: vout2: clktree_init
  549. [    4.129097@1] vout: vout2: register server: nulldisp_vout2_server
  550. [    4.129219@1] vout: vout2: init mode null set ok
  551. [    4.129220@1] vout: vout2: aml_vout2_probe OK
  552. [    4.129327@1] DI: di_module_init ok.
  553. [    4.129332@1] DI: di_module_init: major 509
  554. [    4.129708@1] deinterlace deinterlace: assigned reserved memory node linux,di_cma
  555. [    4.129714@1] di:flag_cma=1
  556. [    4.129716@1] DI: CMA size 0x2800000.
  557. [    4.129733@1] pre_irq:75
  558. [    4.129739@1] post_irq:76
  559. [    4.129742@1] DI: di_probe allocate rdma channel 0.
  560. [    4.129748@1] di_get_vpu_clkb: get clk vpu error.
  561. [    4.129751@1] DI: vpu clkb <334000000, 667000000>
  562. [    4.129782@1] get clkb rate:333333328
  563. [    4.129790@1] DI:enable vpu clkb.
  564. [    4.129803@1] 0x000000de:Y=de,U=0,V=0
  565. [    4.129804@1] 0x000000df:Y=df,U=0,V=0
  566. [    4.129806@1] 0x000000e0:Y=e0,U=0,V=0
  567. [    4.129807@1] 0x000000e1:Y=e1,U=0,V=0
  568. [    4.129808@1] 0x000000e2:Y=e2,U=0,V=0
  569. [    4.129810@1] 0x000000e3:Y=e3,U=0,V=0
  570. [    4.129811@1] 0x000000f0:Y=f0,U=0,V=0
  571. [    4.129812@1] 0x000000f1:Y=f1,U=0,V=0
  572. [    4.129815@1] 0x000000f2:Y=f2,U=0,V=0
  573. [    4.129816@1] 0x000000f3:Y=f3,U=0,V=0
  574. [    4.129822@1] 0x000000f4:Y=f4,U=0,V=0
  575. [    4.129823@1] 0x000000f5:Y=f5,U=0,V=0
  576. [    4.129825@1] 0x000000f6:Y=f6,U=0,V=0
  577. [    4.129826@1] 0x000000f7:Y=f7,U=0,V=0
  578. [    4.129827@1] 0x000000f8:Y=f8,U=0,V=0
  579. [    4.129828@1] 0x000000f9:Y=f9,U=0,V=0
  580. [    4.129833@1] 0x000000fa:Y=fa,U=0,V=0
  581. [    4.129834@1] 0x000000fb:Y=fb,U=0,V=0
  582. [    4.129835@1] 0x000000fc:Y=fc,U=0,V=0
  583. [    4.129838@1] 0x000000fd:Y=fd,U=0,V=0
  584. [    4.129840@1] 0x000000fe:Y=fe,U=0,V=0
  585. [    4.129842@1] 0x000000ff:Y=ff,U=0,V=0
  586. [    4.129845@1] 0x0000003a:Y=3a,U=0,V=0
  587. [    4.129847@1] 0x0000003b:Y=3b,U=0,V=0
  588. [    4.129848@1] 0x0000003c:Y=3c,U=0,V=0
  589. [    4.129851@1] DI: support multi decoding 58~59~60.
  590. [    4.130042@1] DI: di_probe:Di use HRTIMER
  591. [    4.130160@1] di_probe:ok
  592. [    4.130251@1] vdin_drv_init: major 508
  593. [    4.131482@1] rdma_register, rdma_table_addr f0efb000 rdma_table_addr_phy ec84a000 reg_buf ed061400
  594. [    4.131484@1] rdma_register success, handle 3 table_size 512
  595. [    4.131490@1] vdin_drv_probe:vdin.0 rdma hanld 3.
  596. [    4.131659@1]
  597. [    4.131659@1]  vdin memory resource undefined!!
  598. [    4.131663@1] vdin0 cma_mem_size = 8 MB
  599. [    4.131666@1] vdin0 irq: 56 rdma irq: 2
  600. [    4.131669@1] set_canvas_manual = 0
  601. [    4.131670@1] no urgent_en found
  602. [    4.131701@1] get fclk_div5 err
  603. [    4.131703@1] vdin_drv_probe: vdin cannot get msr clk !!!
  604. [    4.131730@1] vdin_drv_probe: driver initialized ok
  605. [    4.131834@1] rdma_register, rdma_table_addr f0efd000 rdma_table_addr_phy ec84b000 reg_buf ed061800
  606. [    4.131836@1] rdma_register success, handle 4 table_size 512
  607. [    4.131838@1] vdin_drv_probe:vdin.1 rdma hanld 4.
  608. [    4.132046@1] vdin vdin1: assigned reserved memory node linux,vdin1_cma
  609. [    4.132048@1]
  610. [    4.132048@1]  vdin memory resource done.
  611. [    4.132053@1] vdin1 cma_mem_size = 64 MB
  612. [    4.132056@1] vdin1 irq: 57 rdma irq: 4
  613. [    4.132060@1] set_canvas_manual = 0
  614. [    4.132061@1] no urgent_en found
  615. [    4.132088@1] get fclk_div5 err
  616. [    4.132092@1] vdin_drv_probe: vdin cannot get msr clk !!!
  617. [    4.132101@1] vdin_debugfs_init only support debug vdin0 1
  618. [    4.132102@1] vdin_drv_probe: driver initialized ok
  619. [    4.132230@1] vdin_drv_init: vdin driver init done
  620. [    4.132233@1] [viuin..]viuin_init_module viuin module init
  621. [    4.132493@1] [viuin..]viuin_probe probe ok.
  622. [    4.132995@1] [RX]-hdmirx: hdmirx_init.
  623. [    4.132997@1] ESM HLD: Initializing...
  624. [    4.133128@1] tvin_afe: tvafe_drv_init: major 506
  625. [    4.133457@1] tvin_afe: tvafe_drv_init.
  626. [    4.133617@1] tvafe_vbi: vbi: vbi_init.
  627. [    4.133801@1] amvdec_csi module: init.
  628. [    4.133806@1] amvdec_csi_init_module:major 504
  629. [    4.133965@1] amvdec_csi module: init. ok
  630. [    4.133970@1] amlvid:info: amlvideo_init called
  631. [    4.133970@1] amlvid:info: amlvideo_create_instance called
  632. [    4.133983@1] amlvid:info: v4l2_dev.name=:amlvideo-000
  633. [    4.134137@1] amlvideo-000: V4L2 device registered as video10
  634. [    4.134139@1] amlvid:info: amlvideo_create_instance called
  635. [    4.134141@1] amlvid:info: v4l2_dev.name=:amlvideo-001
  636. [    4.134254@1] amlvideo-001: V4L2 device registered as video23
  637. [    4.134415@1] PPMGRDRV: warn: ppmgr module init func called
  638. [    4.134541@1] PPMGRDRV: err: ppmgr_driver_probe called
  639. [    4.134616@1] PPMGRDRV: info: ppmgr_dev major:503
  640. [    4.134826@1] ppmgr: probe of ppmgr failed with error -22
  641. [    4.136010@1] ionvideo-000: V4L2 device registered as video13
  642. [    4.136123@1] ionvideo-001: V4L2 device registered as video14
  643. [    4.136236@1] ionvideo-002: V4L2 device registered as video15
  644. [    4.136357@1] ionvideo-003: V4L2 device registered as video16
  645. [    4.136476@1] ionvideo-004: V4L2 device registered as video17
  646. [    4.136588@1] ionvideo-005: V4L2 device registered as video18
  647. [    4.136698@1] ionvideo-006: V4L2 device registered as video19
  648. [    4.136818@1] ionvideo-007: V4L2 device registered as video20
  649. [    4.136932@1] ionvideo-008: V4L2 device registered as video21
  650. [    4.136933@1] ionvid: info: Video Technology Magazine Ion Video
  651. [    4.136935@1] ionvid: info: Capture Board ver 1.0 successfully loaded
  652. [    4.137181@1] picdec: picdec_driver_probe called.
  653. [    4.137424@1] picdec: probe of picdec failed with error -22
  654. [    4.137636@1] videosync_create_instance dev_s cbb98c00,dev_s->dev ed1413c0
  655. [    4.137639@1] videosync_create_instance reg videosync.0
  656. [    4.137725@1] aml_vecm_init:module init
  657. [    4.137729@3] videosync_thread started
  658. [    4.137951@1]
  659. [    4.137951@1]  VECM probe start
  660. [    4.138230@1] vlock_status_init vlock_en:0
  661. [    4.138256@1] Can't find  wb_sel.
  662. [    4.138257@1] hdr:Can't find  cfg_en_osd_100.
  663. [    4.138262@1] amlogic, vecm
  664. [    4.138263@1] vlock dt support: 1
  665. [    4.138264@1] vlock dt new_fsm: 0
  666. [    4.138265@1] vlock dt hwver: 0
  667. [    4.138267@1] vlock dt phlock_en: 0
  668. [    4.138269@1] Can't find  vlock_en.
  669. [    4.138271@1] Can't find  vlock_mode.
  670. [    4.138273@1] Can't find  vlock_pll_m_limit.
  671. [    4.138274@1] Can't find  vlock_line_limit.
  672. [    4.138302@1] param_config vlock_en:0
  673. [    4.138307@1] aml_vecm_probe: ok
  674. [    4.138358@1] amdolby_vision_init:module init
  675. [    4.138726@1]
  676. [    4.138726@1]  amdolby_vision probe start & ver: 20181220
  677. [    4.138732@1]
  678. [    4.138732@1]  cpu_id=2 tvmode=0
  679. [    4.138874@1] dolby_vision_init_receiver(dvel)
  680. [    4.138880@1] dolby_vision_init_receiver: dvel
  681. [    4.139029@1] amdolby_vision_probe: ok
  682. [    4.139100@1] prime_sl module init
  683. [    4.139568@1] vm_init .
  684. [    4.140552@1] meson-mmc: mmc driver version: 3.02, 2017-05-15: New Emmc Host Controller
  685. [    4.141541@1] meson-mmc: >>>>>>>>hostbase f102b000, dmode
  686. [    4.141807@1] meson-mmc: actual_clock :400000, HHI_nand: 0x80
  687. [    4.141810@1] meson-mmc: [meson_mmc_clk_set_rate_v3] after clock: 0x1000033c
  688. [    4.185458@1] meson-mmc: meson_mmc_probe() : success!
  689. [    4.191036@3] meson-mmc: >>>>>>>>hostbase f10b5000, dmode
  690. [    4.191072@3] meson-mmc: gpio_cd = 1ca
  691. [    4.228850@3] meson-mmc: meson_mmc_probe() : success!
  692. [    4.230084@1] meson-mmc: >>>>>>>>hostbase f113f000, dmode
  693. [    4.230375@1] meson-mmc: actual_clock :400000, HHI_nand: 0x80
  694. [    4.230377@1] meson-mmc: [meson_mmc_clk_set_rate_v3] after clock: 0x1000033c
  695. [    4.267861@1] meson-mmc: meson_mmc_probe() : success!
  696. [    4.268168@1] amlogic mtd driver init
  697. [    4.268915@0] aml_vrtc rtc: rtc core: registered aml_vrtc as rtc0
  698. [    4.269711@0] cectx ff80023c.aocec: cec driver date:2019/6/13:early suspend not report pw status
  699. [    4.269711@0]
  700. [    4.269951@0] cectx ff80023c.aocec: compatible:amlogic, aocec-sm1
  701. [    4.269954@0] cectx ff80023c.aocec: cecb_ver:0x2
  702. [    4.269957@0] cectx ff80023c.aocec: line_reg:0x1
  703. [    4.269959@0] cectx ff80023c.aocec: line_bit:0x3
  704. [    4.269961@0] cectx ff80023c.aocec: ee_to_ao:0x1
  705. [    4.270107@0] input: cec_input as /devices/virtual/input/input1
  706. [    4.270249@0] cectx ff80023c.aocec: not find 'port_num'
  707. [    4.270253@0] cectx ff80023c.aocec: using cec:1
  708. [    4.270281@0] cectx ff80023c.aocec: no hdmirx regs
  709. [    4.270283@0] cectx ff80023c.aocec: no hhi regs
  710. [    4.270292@0] cectx ff80023c.aocec: not find 'output'
  711. [    4.270299@0] cec: wake up flag:0
  712. [    4.271766@0] cectx ff80023c.aocec: irq cnt:2
  713. [    4.272139@0] cectx ff80023c.aocec: wakeup_reason:0x0
  714. [    4.272231@0] cectx ff80023c.aocec: cev val1: 0x0;val2: 0x0
  715. [    4.272235@0] cectx ff80023c.aocec: aml_cec_probe success end
  716. [    4.272663@0] unifykey: storage in base: 0xc5000000
  717. [    4.272666@0] unifykey: storage out base: 0xc5040000
  718. [    4.272668@0] unifykey: storage block base: 0xc5080000
  719. [    4.272669@0] unifykey: probe done!
  720. [    4.273210@0] unifykey: no efuse-version set, use default value: -1
  721. [    4.273213@0] unifykey: key unify config unifykey-num is 16
  722. [    4.273270@0] unifykey: key unify fact unifykey-num is 16
  723. [    4.273279@0] unifykey: unifykey_devno: 1f000000
  724. [    4.273507@0] unifykey: device unifykeys created ok
  725. [    4.273627@0] unifykey: aml_unifykeys_init done!
  726. [    4.273847@0] meson ts init
  727. [    4.273898@0] tsensor id: 0
  728. [    4.274085@0] tsensor trim info: 0xfa00805c!
  729. [    4.274087@0] tsensor hireboot: 0xc0ff2aa0
  730. [    4.274179@0] meson ts init
  731. [    4.274203@0] tsensor id: 1
  732. [    4.274343@0] tsensor trim info: 0xfa00804c!
  733. [    4.274345@0] tsensor hireboot: 0xc0ff2aa0
  734. [    4.274493@0] audio_dsp: [dsp]register dsp to char divece(257)
  735. [    4.274751@0] amaudio: amaudio: driver amaudio init!
  736. [    4.275152@1] amaudio: amaudio_init - amaudio: driver amaudio succuess!
  737. [    4.275837@0] sysled: module init
  738. [    4.276270@0] meson_wdt ffd0f0d0.watchdog: start watchdog
  739. [    4.276274@0] meson_wdt ffd0f0d0.watchdog: creat work queue for watch dog
  740. [    4.276512@0] meson_wdt ffd0f0d0.watchdog: AML Watchdog Timer probed done
  741. [    4.276830@1] meson-aml-mmc ffe07000.emmc: divider requested rate 100000000 != actual rate 99999999: ret=0
  742. [    4.276835@1] meson-mmc: actual_clock :99999999, HHI_nand: 0x80
  743. [    4.276837@1] meson-mmc: [meson_mmc_clk_set_rate_v3] after clock: 0x1000024a
  744. [    4.276842@1] meson-mmc: Data 1 aligned delay is 0
  745. [    4.276845@1] meson-mmc: emmc: clk 99999999 tuning start
  746. [    4.277403@0] amlogic rfkill init
  747. [    4.277618@0] enter bt_probe of_node
  748. [    4.277646@0] not get gpio_en
  749. [    4.277657@0] power on valid level is high
  750. [    4.277657@0] bt: power_on_pin_OD = 0;
  751. [    4.277659@0] bt: power_off_flag = 1;
  752. [    4.277660@0] dis power down = 0;
  753. [    4.278381@1] meson-mmc: emmc: rx_tuning_result[0] = 40
  754. [    4.279858@1] meson-mmc: emmc: rx_tuning_result[1] = 40
  755. [    4.281316@1] meson-mmc: emmc: rx_tuning_result[2] = 40
  756. [    4.282751@1] meson-mmc: emmc: rx_tuning_result[3] = 40
  757. [    4.284204@1] meson-mmc: emmc: rx_tuning_result[4] = 40
  758. [    4.285634@1] meson-mmc: emmc: rx_tuning_result[5] = 40
  759. [    4.287071@1] meson-mmc: emmc: rx_tuning_result[6] = 40
  760. [    4.287112@1] meson-mmc: Tuning transfer error: nmatch=0 tuning_err:0xffffffac
  761. [    4.288629@1] meson-mmc: emmc: rx_tuning_result[8] = 40
  762. [    4.290070@1] meson-mmc: emmc: rx_tuning_result[9] = 40
  763. [    4.290074@1] meson-mmc: emmc: best_win_start =8, best_win_size =9
  764. [    4.290078@1] meson-mmc: emmc: sd_emmc_regs->gclock=0x1000024a,sd_emmc_regs->gadjust=0x22000
  765. [    4.290282@1] emmc: new HS200 MMC card at address 0001
  766. [    4.290827@1] emmc: clock 99999999, 8-bit-bus-width
  767. [    4.290827@1]  
  768. [    4.290827@1] mmcblk0: emmc:0001 500073 29.1 GiB
  769. [    4.291029@1] mmcblk0boot0: emmc:0001 500073 partition 1 4.00 MiB
  770. [    4.291221@1] mmcblk0boot1: emmc:0001 500073 partition 2 4.00 MiB
  771. [    4.291406@1] mmcblk0rpmb: emmc:0001 500073 partition 3 4.00 MiB
  772. [    4.292432@1] meson-mmc: Enter aml_emmc_partition_ops
  773. [    4.292932@1] meson-mmc: [mmc_read_partition_tbl] mmc read partition OK!
  774. [    4.292934@1] meson-mmc: add_emmc_partition
  775. [    4.293115@1] meson-mmc: [mmcblk0p01]           bootloader  offset 0x000000000000, size 0x000000400000
  776. [    4.293239@1] meson-mmc: [mmcblk0p02]             reserved  offset 0x000002400000, size 0x000004000000
  777. [    4.293383@1] meson-mmc: [mmcblk0p03]                cache  offset 0x000006c00000, size 0x000046000000
  778. [    4.293536@1] meson-mmc: [mmcblk0p04]                  env  offset 0x00004d400000, size 0x000000800000
  779. [    4.293659@1] meson-mmc: [mmcblk0p05]                 logo  offset 0x00004e400000, size 0x000000800000
  780. [    4.293794@1] meson-mmc: [mmcblk0p06]             recovery  offset 0x00004f400000, size 0x000001800000
  781. [    4.293920@1] meson-mmc: [mmcblk0p07]                 misc  offset 0x000051400000, size 0x000000800000
  782. [    4.294067@1] meson-mmc: [mmcblk0p08]                 dtbo  offset 0x000052400000, size 0x000000800000
  783. [    4.294193@1] meson-mmc: [mmcblk0p09]             cri_data  offset 0x000053400000, size 0x000000800000
  784. [    4.294330@1] meson-mmc: [mmcblk0p10]                param  offset 0x000054400000, size 0x000001000000
  785. [    4.294455@1] meson-mmc: [mmcblk0p11]                 boot  offset 0x000055c00000, size 0x000001000000
  786. [    4.294581@1] meson-mmc: [mmcblk0p12]                  rsv  offset 0x000057400000, size 0x000001000000
  787. [    4.294715@1] meson-mmc: [mmcblk0p13]             metadata  offset 0x000058c00000, size 0x000001000000
  788. [    4.294841@1] meson-mmc: [mmcblk0p14]               vbmeta  offset 0x00005a400000, size 0x000000200000
  789. [    4.294980@1] meson-mmc: [mmcblk0p15]                  tee  offset 0x00005ae00000, size 0x000002000000
  790. [    4.295116@1] meson-mmc: [mmcblk0p16]               vendor  offset 0x00005d600000, size 0x000050000000
  791. [    4.295237@1] meson-mmc: [mmcblk0p17]                  odm  offset 0x0000ade00000, size 0x000008000000
  792. [    4.295375@1] meson-mmc: [mmcblk0p18]               system  offset 0x0000b6600000, size 0x000080000000
  793. [    4.295533@1] meson-mmc: [mmcblk0p19]              product  offset 0x000136e00000, size 0x000008000000
  794. [    4.295668@1] meson-mmc: [mmcblk0p20]                 data  offset 0x00013f600000, size 0x000608600000
  795. [    4.295686@1] card key: card_blk_probe.
  796. [    4.295690@1] emmc_key_init:183 emmc key lba_start:0x12020,lba_end:0x12220
  797. [    4.295693@1] emmc key: emmc_key_init:205 ok.
  798. [    4.299506@1] meson-mmc: amlmmc_dtb_init: register dtb chardev
  799. [    4.299507@1] meson-mmc: calc 7d34a471, store 7d34a471
  800. [    4.302665@1] meson-mmc: calc 7d34a471, store 7d34a471
  801. [    4.302668@1] meson-mmc: total valid 2
  802. [    4.302939@1] meson-mmc: amlmmc_dtb_init: register dtb chardev OK
  803. [    4.302940@1] meson-mmc: Exit aml_emmc_partition_ops OK.
  804. [    4.304024@0] BLASTER Driver Init
  805. [    4.304560@0] irblaster: probe
  806. [    4.305435@0] dmc_monitor_probe
  807. [    4.306417@0] aml_atvdemod_init: OK, atv demod version: V2.04.
  808. [    4.306564@0] defendkey ff630218.defendkey: Reserved memory is not enough!
  809. [    4.306575@0] defendkey: probe of ff630218.defendkey failed with error -22
  810. [    4.306968@1] usbcore: registered new interface driver snd-usb-audio
  811. [    4.308064@1] aml_codec_T9015 ff632000.t9015: aml_T9015_audio_codec_probe
  812. [    4.308085@1] T9015 acodec used by auge, tdmout:1
  813. [    4.310372@1] asoc debug: aml_audio_controller_probe-127
  814. [    4.312120@1] asoc-aml-card auge_sound: aml_card_probe, parse error -517
  815. [    4.312123@1] aml_card_probe error ret:-517
  816. [    4.312580@1] aml_tdm_platform_probe, tdm ID = 0, lane_cnt = 2
  817. [    4.312599@1] snd_tdm ff660000.audiobus:tdm@0: lane_mask_out = 0, lane_oe_mask_out = 0
  818. [    4.312732@1] aml_tdm_platform_probe(), share en = 1
  819. [    4.312733@1] No channel mask node Channel_Mask
  820. [    4.312971@1] aml_tdm_platform_probe, tdm ID = 1, lane_cnt = 8
  821. [    4.313036@1] TDM id 1 samesource_sel:3
  822. [    4.313043@1] snd_tdm ff660000.audiobus:tdm@1: lane_mask_out = 1, lane_oe_mask_out = 0
  823. [    4.313265@1] TDM id 1 output clk enable:1
  824. [    4.313296@1] aml_tdm_platform_probe(), share en = 1
  825. [    4.313297@1] No channel mask node Channel_Mask
  826. [    4.313313@1] TDM id 1 tuning clk enable:1
  827. [    4.313473@1] aml_tdm_platform_probe, tdm ID = 2, lane_cnt = 4
  828. [    4.313490@1] snd_tdm ff660000.audiobus:tdm@2: lane_mask_out = 0, lane_oe_mask_out = 0
  829. [    4.313659@1] aml_tdm_platform_probe(), share en = 1
  830. [    4.313660@1] No channel mask node Channel_Mask
  831. [    4.314417@1] aml_spdif_platform_probe, spdif ID = 0
  832. [    4.314751@1] SPDIF id 0 asrc_id:0 auto_asrc:0
  833. [    4.314824@1] Spdif id 0 tuning clk enable:1
  834. [    4.314827@1] spdifout_play_with_zerodata, spdif id:0 enable:0
  835. [    4.314832@1] spdif_a fifo ctrl, frddr:0 type:3, 32 bits, chmask 0x3, swap 0x10
  836. [    4.314840@1] spdif_info: rate: 48000, channel status ch0_l:0x100, ch0_r:0x100, ch1_l:0x200, ch1_r:0x200
  837. [    4.314847@1] hdmitx: audio: aout notify format CT_PCM
  838. [    4.314850@1] hdmitx: hw: set audio
  839. [    4.314851@1] hdmitx: hw: hdmitx tx_aud_src = 0
  840. [    4.314870@1] hdmitx: fs = 3, cd = 6, tmds_clk = 0
  841. [    4.314873@1] hdmitx: hw: aud_n_para = 6144
  842. [    4.314881@1] hdmitx: hw: set channel status
  843. [    4.314917@1] hdmitx: audio: Audio Type: PCM
  844. [    4.314920@1] hdmitx: audio: set audio param
  845. [    4.314925@1] spdif_a is set to enable
  846. [    4.314934@1] aml_spdif_platform_probe, register soc platform
  847. [    4.314972@1] aml_spdif_platform_probe, spdif ID = 1
  848. [    4.315032@1] spdifout_play_with_zerodata, spdif id:1 enable:0
  849. [    4.315037@1] spdif_b fifo ctrl, frddr:0 type:3, 32 bits, chmask 0x3, swap 0x10
  850. [    4.315041@1] spdif_info: rate: 48000, channel status ch0_l:0x100, ch0_r:0x100, ch1_l:0x200, ch1_r:0x200
  851. [    4.315049@1] spdif_b is set to enable
  852. [    4.315056@1] aml_spdif_platform_probe, register soc platform
  853. [    4.315906@1] default set lane_mask_in as all lanes.
  854. [    4.315910@1] aml_pdm_platform_probe pdm filter mode from dts:1
  855. [    4.315921@1] aml_pdm_platform_probe, register soc platform
  856. [    4.316383@1] audio_ddr_mngr: 0, irqs toddr 37, frddr 41
  857. [    4.316386@1] audio_ddr_mngr: 1, irqs toddr 38, frddr 42
  858. [    4.316389@1] audio_ddr_mngr: 2, irqs toddr 39, frddr 43
  859. [    4.316391@1] audio_ddr_mngr: 3, irqs toddr 40, frddr 44
  860. [    4.316819@1]    datain_src:4, datain_chnum:2, datain_chumask:3
  861. [    4.316821@1]    datalb_src:1, datalb_chnum:2, datalb_chmask:3
  862. [    4.316824@1]    datain_lane_mask:0x1, datalb_lane_mask:0x1
  863. [    4.317036@1] loopback_platform_probe, p_loopback->id:0 register soc platform
  864. [    4.317740@1] effect_platform_probe, line:565
  865. [    4.317873@1] eqdrc_clk_set, src pll:399999993, clk:199999997
  866. [    4.317877@1] effect_platform_probe   module:1, lane_mask:1, ch_mask:3
  867. [    4.318691@1] vad_platform_probe vad data source sel:4, level:1
  868. [    4.318880@1] input: vad_keypad as /devices/platform/soc/ff660000.audiobus/ff660000.audiobus:vad/input/input2
  869. [    4.319347@3] Register vad
  870. [    4.319747@3] EARC ff660000.audiobus:earc: Check whether support eARC TX
  871. [    4.319753@3] EARC ff660000.audiobus:earc: Check whether support eARC TX
  872. [    4.319757@3] EARC ff660000.audiobus:earc: Check whether support eARC TX
  873. [    4.319761@3] EARC ff660000.audiobus:earc: Check whether support eARC TX
  874. [    4.319833@3] EARC ff660000.audiobus:earc: platform get irq tx_cmdc failed, Check whether support eARC TX
  875. [    4.319836@3] EARC ff660000.audiobus:earc: platform get irq tx_dmac failed, Check whether support eARC TX
  876. [    4.319850@3] earc_platform_probe, register soc platform
  877. [    4.320104@3] GACT probability NOT on
  878. [    4.320116@3] Mirror/redirect action on
  879. [    4.320122@3] u32 classifier
  880. [    4.320123@3]     Actions configured
  881. [    4.320128@3] Netfilter messages via NETLINK v0.30.
  882. [    4.320339@3] nf_conntrack version 0.5.0 (16384 buckets, 65536 max)
  883. [    4.320586@3] ctnetlink v0.93: registering with nfnetlink.
  884. [    4.321147@0] xt_time: kernel timezone is -0000
  885. [    4.321229@0] ipip: IPv4 and MPLS over IPv4 tunneling driver
  886. [    4.321664@0] IPv4 over IPsec tunneling driver
  887. [    4.340261@0] ip_tables: (C) 2000-2006 Netfilter Core Team
  888. [    4.340454@0] arp_tables: arp_tables: (C) 2002 David S. Miller
  889. [    4.351057@0] Initializing XFRM netlink socket
  890. [    4.351467@0] NET: Registered protocol family 10
  891. [    4.352525@0] mip6: Mobile IPv6
  892. [    4.352544@0] ip6_tables: (C) 2000-2006 Netfilter Core Team
  893. [    4.362848@0] sit: IPv6, IPv4 and MPLS over IPv4 tunneling driver
  894. [    4.363735@0] NET: Registered protocol family 17
  895. [    4.363758@0] NET: Registered protocol family 15
  896. [    4.363828@0] bridge: filtering via arp/ip/ip6tables is no longer available by default. Update your scripts to load br_netfilter if you need this.
  897. [    4.363928@0] Bluetooth: RFCOMM TTY layer initialized
  898. [    4.363935@0] Bluetooth: RFCOMM socket layer initialized
  899. [    4.363970@0] Bluetooth: RFCOMM ver 1.11
  900. [    4.363978@0] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
  901. [    4.363980@0] Bluetooth: BNEP filters: protocol multicast
  902. [    4.363989@0] Bluetooth: BNEP socket layer initialized
  903. [    4.363991@0] Bluetooth: HIDP (Human Interface Emulation) ver 1.2
  904. [    4.364003@0] Bluetooth: HIDP socket layer initialized
  905. [    4.364023@0] l2tp_core: L2TP core driver, V2.0
  906. [    4.364033@0] l2tp_ppp: PPPoL2TP kernel driver, V2.0
  907. [    4.364035@0] l2tp_ip: L2TP IP encapsulation support (L2TPv3)
  908. [    4.364050@0] l2tp_netlink: L2TP netlink interface
  909. [    4.364080@0] l2tp_eth: L2TP ethernet pseudowire support (L2TPv3)
  910. [    4.364095@0] l2tp_debugfs: L2TP debugfs support
  911. [    4.364096@0] l2tp_ip6: L2TP IP encapsulation support for IPv6 (L2TPv3)
  912. [    4.364129@0] NET: Registered protocol family 35
  913. [    4.364173@0] Key type dns_resolver registered
  914. [    4.365875@0] Registering SWP/SWPB emulation handler
  915. [    4.366474@3] registered taskstats version 1
  916. [    4.580147@3] asoc-aml-card auge_sound: control 2:0:0:I2SIn CLK:0 is already present
  917. [    4.580153@3] snd_tdm ff660000.audiobus:tdm@1: ASoC: Failed to add I2SIn CLK: -16
  918. [    4.580155@3] aml_dai_tdm_probe, failed add snd tdm controls
  919. [    4.580163@3] asoc-aml-card auge_sound: control 2:0:0:I2SIn CLK:0 is already present
  920. [    4.580169@3] snd_tdm ff660000.audiobus:tdm@2: ASoC: Failed to add I2SIn CLK: -16
  921. [    4.580171@3] aml_dai_tdm_probe, failed add snd tdm controls
  922. [    4.580174@3] aml_dai_spdif_probe
  923. [    4.580192@3] aml_dai_spdif_probe
  924. [    4.580195@3] asoc debug: earc_dai_probe-342
  925. [    4.580202@3] aml_dai_set_tdm_slot(), txmask(0xff), rxmask(0xff)
  926. [    4.580204@3]    lanes_out_cnt(0), lanes_in_cnt(1)
  927. [    4.580205@3]    lanes_oe_out_cnt(0), lanes_oe_in_cnt(0)
  928. [    4.580207@3]    lanes_lb_cnt(0)
  929. [    4.580210@3]    slots(8), slot_width(32)
  930. [    4.580221@3] asoc aml_dai_set_tdm_fmt, 0x4004, cbbed110, id(0), clksel(0)
  931. [    4.580227@3] master_mode(1), binv(1), finv(0) out_skew(2), in_skew(3)
  932. [    4.580888@3] asoc-aml-card auge_sound: multicodec <-> TDM-A mapping ok
  933. [    4.580894@3] aml_dai_set_tdm_slot(), txmask(0x3), rxmask(0x3)
  934. [    4.580897@3]    lanes_out_cnt(1), lanes_in_cnt(1)
  935. [    4.580899@3]    lanes_oe_out_cnt(0), lanes_oe_in_cnt(0)
  936. [    4.580902@3]    lanes_lb_cnt(0)
  937. [    4.580903@3]    slots(2), slot_width(32)
  938. [    4.580916@3] asoc aml_dai_set_tdm_fmt, 0x4001, ed7e6e10, id(1), clksel(1)
  939. [    4.580923@3] master_mode(1), binv(1), finv(1) out_skew(2), in_skew(3)
  940. [    4.581459@3] asoc-aml-card auge_sound: multicodec <-> TDM-B mapping ok
  941. [    4.581464@3] aml_dai_set_tdm_slot(), txmask(0x3), rxmask(0x3)
  942. [    4.581466@3]    lanes_out_cnt(0), lanes_in_cnt(1)
  943. [    4.581468@3]    lanes_oe_out_cnt(0), lanes_oe_in_cnt(0)
  944. [    4.581469@3]    lanes_lb_cnt(0)
  945. [    4.581472@3]    slots(2), slot_width(32)
  946. [    4.581478@3] asoc aml_dai_set_tdm_fmt, 0x4001, c985a210, id(2), clksel(2)
  947. [    4.581483@3] master_mode(1), binv(1), finv(1) out_skew(2), in_skew(3)
  948. [    4.582033@3] asoc-aml-card auge_sound: dummy <-> TDM-C mapping ok
  949. [    4.582536@3] asoc-aml-card auge_sound: dummy <-> ff660000.audiobus:pdm mapping ok
  950. [    4.582542@3] aml_dai_set_spdif_fmt , fmt 0x4000
  951. [    4.582649@3] aml_spdif_new spdif_a, clk continuous:1
  952. [    4.582652@3] spdifout_play_with_zerodata_free, spdif id:0
  953. [    4.583142@3] asoc-aml-card auge_sound: dummy <-> SPDIF mapping ok
  954. [    4.583147@3] set normal 512 fs /4 fs
  955. [    4.583204@3]     set spdifout clk:6144000, mpll:24576000
  956. [    4.583207@3]     get spdifout clk:6143997, mpll:24575987
  957. [    4.583211@3] aml_dai_set_spdif_fmt , fmt 0x4010
  958. [    4.583285@3] aml_spdif_new spdif_b, clk continuous:1
  959. [    4.583288@3] spdifout_play_with_zerodata_free, spdif id:1
  960. [    4.583517@3] asoc-aml-card auge_sound: dummy <-> SPDIF-B mapping ok
  961. [    4.583522@3] asoc earc_dai_set_fmt, 0x4000, ed5d5510
  962. [    4.584099@3] asoc-aml-card auge_sound: dummy <-> ff660000.audiobus:earc mapping ok
  963. [    4.584105@3]
  964. [    4.584105@3] loopback_dai_set_sysclk, 0, 12288000, 0
  965. [    4.584109@3] asoc loopback_dai_set_fmt, 0x4010, c985b590
  966. [    4.584594@3] asoc-aml-card auge_sound: dummy <-> ff660000.audiobus:loopback@0 mapping ok
  967. [    4.589759@3] snd_card_add_kcontrols card:c989cc10
  968. [    4.589834@3] eq/drc v1 function enable
  969. [    4.589841@3] no node audio_effect for eq/drc info!
  970. [    4.589842@3] Failed to add audio effects v1 controls
  971. [    4.590488@3] dwc3 ff500000.dwc3: Configuration mismatch. dr_mode forced to host
  972. [    4.593237@3] xhci-hcd xhci-hcd.0.auto: xHCI Host Controller
  973. [    4.593258@3] xhci-hcd xhci-hcd.0.auto: new USB bus registered, assigned bus number 1
  974. [    4.593615@3] xhci-hcd xhci-hcd.0.auto: hcc params 0x0228fe6c hci version 0x110 quirks 0x20010010
  975. [    4.593661@3] xhci-hcd xhci-hcd.0.auto: irq 29, io mem 0xff500000
  976. [    4.594468@0] hub 1-0:1.0: USB hub found
  977. [    4.594496@0] hub 1-0:1.0: 2 ports detected
  978. [    4.594866@0] xhci-hcd xhci-hcd.0.auto: xHCI Host Controller
  979. [    4.594892@0] xhci-hcd xhci-hcd.0.auto: new USB bus registered, assigned bus number 2
  980. [    4.594981@0] usb usb2: We don't know the algorithms for LPM for this host, disabling LPM.
  981. [    4.595564@1] hub 2-0:1.0: USB hub found
  982. [    4.595591@1] hub 2-0:1.0: 1 port detected
  983. [    4.599163@1] aml_vrtc rtc: setting system clock to 2015-01-01 00:00:14 UTC (1420070414)
  984. [    4.599465@1] dwc_otg ff400000.dwc2_a: dwc_otg_driver_probe(ed61ea00)
  985. [    4.599497@1] dwc_otg: usb0: type: 2 speed: 0, config: 0, dma: 0, id: 0, phy: ffe09000, ctrl: 0
  986. [    4.599506@1] dwc_otg ff400000.dwc2_a: base=0xf1740000
  987. [    4.599510@1] dwc_otg ff400000.dwc2_a: dwc_otg_device=0xc9874780
  988. [    4.700435@0] dwc_otg: Core Release: 3.30a
  989. [    4.700440@0] dwc_otg: Setting default values for core params
  990. [    4.700451@0] dwc_otg: curmode: 0, host_only: 0
  991. [    4.700474@0] dwc_otg ff400000.dwc2_a: DMA config: BURST_DEFAULT
  992. [    4.712743@0] dwc_otg: Using Buffer DMA mode
  993. [    4.712747@0] dwc_otg: OTG VER PARAM: 1, OTG VER FLAG: 1
  994. [    4.712750@0] dwc_otg: Working on port type = SLAVE
  995. [    4.712754@0] dwc_otg: Dedicated Tx FIFOs mode
  996. [    4.714352@0] lcd extern: key_valid: 0
  997. [    4.714354@0] lcd extern: lcd_extern_get_config from dts
  998. [    4.714364@0] lcd extern: error: failed to get extern_5
  999. [    4.714403@0] lcd extern: aml_lcd_extern_probe ok
  1000. [    4.714894@0] bl: chip type/name: (8-sm1)
  1001. [    4.714897@0] bl: key_valid: 0
  1002. [    4.714898@0] bl: aml_bl_config_load from dts
  1003. [    4.714902@0] bl: load: backlight_0
  1004. [    4.714908@0] bl error: failed to get bl_power_attr
  1005. [    4.714913@0] bl: bl pwm_port: PWM_F(5)
  1006. [    4.714918@0] bl: name              = backlight_pwm
  1007. [    4.714920@0] bl: method            = pwm(1)
  1008. [    4.714990@0] bl: register pwm_ch(5) 0xed5d4030
  1009. [    4.714992@0] bl: aml_bl_pwm_channel_register ok
  1010. [    4.715775@0] bl: probe OK
  1011. [    4.716620@0] meson_cdev probe
  1012. [    4.716630@0] thermal: read gpupp failed
  1013. [    4.716746@0] meson_cdev index: 0
  1014. [    4.716911@0] thermal: read gpupp failed
  1015. [    4.716977@0] meson_cdev index: 1
  1016. [    4.716983@0] cpucore_cooling_register, max_cpu_core_num:4
  1017. [    4.717123@0] meson_cdev index: 2
  1018. [    4.717127@0] thermal: read gpupp failed
  1019. [    4.717161@0] meson_cdev index: 3
  1020. [    4.717212@0] find tzd id: 0
  1021. [    4.717326@0] find tzd id: 0
  1022. [    4.717361@0] meson_cdev probe done
  1023. [    4.717501@0] gxbb_pm: enter meson_pm_probe!
  1024. [    4.717534@0] gxbb_pm: meson_pm_probe done
  1025. [    4.717927@0] ALSA device list:
  1026. [    4.717930@0]   #0: AML-AUGESOUND
  1027. [    4.919824@0] usb 1-1: new high-speed USB device number 2 using xhci-hcd
  1028. [    5.075338@0] hub 1-1:1.0: USB hub found
  1029. [    5.075591@0] hub 1-1:1.0: 4 ports detected
  1030. [    5.111825@3] av out status: high
  1031. [    5.371815@0] usb 1-1.2: new low-speed USB device number 3 using xhci-hcd
  1032. [    5.496599@0] input: Logitech USB Keyboard as /devices/platform/ff500000.dwc3/xhci-hcd.0.auto/usb1/1-1/1-1.2/1-1.2:1.0/0003:046D:C31C.0001/input/input3
  1033. [    5.552685@0] hid-generic 0003:046D:C31C.0001: input,hidraw0: USB HID v1.10 Keyboard [Logitech USB Keyboard] on usb-xhci-hcd.0.auto-1.2/input0
  1034. [    5.560284@0] input: Logitech USB Keyboard as /devices/platform/ff500000.dwc3/xhci-hcd.0.auto/usb1/1-1/1-1.2/1-1.2:1.1/0003:046D:C31C.0002/input/input4
  1035. [    5.620209@0] hid-generic 0003:046D:C31C.0002: input,hidraw1: USB HID v1.10 Device [Logitech USB Keyboard] on usb-xhci-hcd.0.auto-1.2/input1
  1036. [    5.699815@0] usb 1-1.3: new low-speed USB device number 4 using xhci-hcd
  1037. [    5.814384@0] input: PixArt HP X500 USB Optical Mouse as /devices/platform/ff500000.dwc3/xhci-hcd.0.auto/usb1/1-1/1-1.3/1-1.3:1.0/0003:03F0:0941.0003/input/input5
  1038. [    5.814891@0] hid-generic 0003:03F0:0941.0003: input,hidraw2: USB HID v1.11 Mouse [PixArt HP X500 USB Optical Mouse] on usb-xhci-hcd.0.auto-1.3/input0
  1039. [    6.483207@3] meson_uart ff803000.serial: ttyS0 use xtal(24M) 24000000 change 115200 to 115200
  1040. [    6.487225@3] Freeing unused kernel memory: 1024K
  1041. [    6.497210@0] init: init first stage started!
  1042. [    6.497268@0] init: First stage mount skipped (recovery mode)
  1043. [    6.501920@0] init: Using Android DT directory /proc/device-tree/firmware/android/
  1044. [    6.558858@0] init: [libfs_mgr]by-name symlink not found for partition: 'vbmeta'
  1045. [    6.561011@0] init: [libfs_mgr]by-name symlink not found for partition: 'boot'
  1046. [    6.568303@0] init: [libfs_mgr]avb_slot_verify failed, result: 2
  1047. [    6.573823@0] init: Failed to open FsManagerAvbHandle for INIT_AVB_VERSION: No such file or directory
  1048. [    6.583338@0] init: Loading SELinux policy
  1049. [    6.592518@0] SELinux: 8192 avtab hash slots, 16624 rules.
  1050. [    6.602272@0] SELinux: 8192 avtab hash slots, 16624 rules.
  1051. [    6.602288@0] SELinux:  1 users, 2 roles, 1327 types, 0 bools, 1 sens, 1024 cats
  1052. [    6.602296@0] SELinux:  93 classes, 16624 rules
  1053. [    6.605396@0] SELinux:  Completing initialization.
  1054. [    6.605400@0] SELinux:  Setting up existing superblocks.
  1055. [    6.751555@0] audit: type=1403 audit(1420070416.648:2): policy loaded auid=4294967295 ses=4294967295
  1056. [    6.755283@0] selinux: SELinux: Loaded policy from /sepolicy
  1057. [    6.755283@0]
  1058. [    6.765681@0] selinux: SELinux: Loaded file_contexts
  1059. [    6.765681@0]
  1060. [    6.773354@1] init: init second stage started!
  1061. [    6.784846@1] init: Using Android DT directory /proc/device-tree/firmware/android/
  1062. [    6.790406@1] selinux: SELinux: Loaded file_contexts
  1063. [    6.790406@1]
  1064. [    6.793425@1] init: Running restorecon...
  1065. [    6.803202@1] init: waitid failed: No child processes
  1066. [    6.803326@1] init: Couldn't load property file '/system/etc/prop.default': open() failed: No such file or directory: No such file or directory
  1067. [    6.818080@1] init: Unable to set property 'ro.hardware' to 'amlogic' in property file '/prop.default': Read-only property was already set
  1068. [    6.828271@1] init: Couldn't load property file '/product/build.prop': open() failed: No such file or directory: No such file or directory
  1069. [    6.840275@1] DI: DI: tasklet schedule cost 12ms.
  1070. [    6.840341@1] init: Couldn't load property file '/odm/default.prop': open() failed: No such file or directory: No such file or directory
  1071. [    6.852537@1] init: Couldn't load property file '/vendor/default.prop': open() failed: No such file or directory: No such file or directory
  1072. [    6.871089@1] audit: type=1400 audit(1420070416.768:3): avc:  denied  { setcheckreqprot } for  pid=1 comm="init" scontext=u:r:init:s0 tcontext=u:object_r:kernel:s0 tclass=security permissive=1
  1073. [    6.883719@1] audit: type=1400 audit(1420070416.784:4): avc:  denied  { create } for  pid=1 comm="init" name="cgroup.procs" scontext=u:r:init:s0 tcontext=u:object_r:rootfs:s0 tclass=file permissive=1
  1074. [    6.887644@3] ueventd: ueventd started!
  1075. [    6.890045@3] selinux: SELinux: Loaded file_contexts
  1076. [    6.890045@3]
  1077. [    6.890094@3] ueventd: Parsing file /ueventd.rc...
  1078. [    6.890768@3] ueventd: Parsing file /vendor/ueventd.rc...
  1079. [    6.890806@3] ueventd: Unable to read config file '/vendor/ueventd.rc': open() failed: No such file or directory
  1080. [    6.890834@3] ueventd: Parsing file /odm/ueventd.rc...
  1081. [    6.890866@3] ueventd: Unable to read config file '/odm/ueventd.rc': open() failed: No such file or directory
  1082. [    6.890969@3] ueventd: Parsing file /ueventd.amlogic.rc...
  1083. [    6.891000@3] ueventd: Unable to read config file '/ueventd.amlogic.rc': open() failed: No such file or directory
  1084. [    6.961709@1] audit: type=1400 audit(1420070416.864:5): avc:  denied  { write } for  pid=1 comm="init" path="/acct/uid_0/pid_2633/cgroup.procs" dev="rootfs" ino=1993 scontext=u:r:init:s0 tcontext=u:object_r:rootfs:s0 tclass=file permissive=1
  1085. [    7.077035@0] ueventd: Coldboot took 0.184 seconds
  1086. [    7.087238@2] audit: type=1400 audit(1420070416.984:6): avc:  denied  { setattr } for  pid=1 comm="init" name="system" dev="rootfs" ino=1484 scontext=u:r:init:s0 tcontext=u:object_r:rootfs:s0 tclass=lnk_file permissive=1
  1087. [    7.105827@2] audit: type=1400 audit(1420070417.004:7): avc:  denied  { module_request } for  pid=1 comm="init" kmod="fs-functionfs" scontext=u:r:init:s0 tcontext=u:r:kernel:s0 tclass=system permissive=1
  1088. [    7.124237@0] audit: type=1400 audit(1420070417.020:8): avc:  denied  { entrypoint } for  pid=3185 comm="init" path="/sbin/logd" dev="rootfs" ino=1337 scontext=u:r:logd:s0 tcontext=u:object_r:rootfs:s0 tclass=file permissive=1
  1089. [    7.140105@0] audit: type=1400 audit(1420070417.040:9): avc:  denied  { read execute } for  pid=3185 comm="logd" path="/sbin/logd" dev="rootfs" ino=1337 scontext=u:r:logd:s0 tcontext=u:object_r:rootfs:s0 tclass=file permissive=1
  1090. [    7.161296@0] audit: type=1400 audit(1420070417.060:10): avc:  denied  { getattr } for  pid=3185 comm="logd" path="/sbin/logd" dev="rootfs" ino=1337 scontext=u:r:logd:s0 tcontext=u:object_r:rootfs:s0 tclass=file permissive=1
  1091. [    7.180046@0] audit: type=1400 audit(1420070417.080:11): avc:  denied  { open } for  pid=3185 comm="logd" path="/sbin/libsysutils.so" dev="rootfs" ino=1315 scontext=u:r:logd:s0 tcontext=u:object_r:rootfs:s0 tclass=file permissive=1
  1092. [    7.203370@1] file system registered
  1093. [    7.212401@0] logd: failed to set AID_LOGD uid
  1094. [    7.212479@1] assign_ffs_buffer FFS_BUFFER_MAX=100!!!
  1095. [    7.212557@0] logd: Cannot read /system/etc/event-log-tags
  1096. [    7.214017@0] logd.auditd: start
  1097. [    7.215149@0] logd.klogd: 7155343877
  1098. [    7.242497@3] type=1400 audit(1420070417.112:22): avc: denied { execute_no_trans } for pid=3203 comm="sh" path="/sbin/toolbox" dev="rootfs" ino=1445 scontext=u:r:shell:s0 tcontext=u:object_r:rootfs:s0 tclass=file permissive=1
  1099. [    7.257299@3] type=1400 audit(1420070417.112:22): avc: denied { execute_no_trans } for pid=3203 comm="sh" path="/sbin/toolbox" dev="rootfs" ino=1445 scontext=u:r:shell:s0 tcontext=u:object_r:rootfs:s0 tclass=file permissive=1
  1100. [    7.276964@3] type=1400 audit(1420070417.132:23): avc: denied { write } for pid=3190 comm="sh" name="/" dev="tmpfs" ino=12495 scontext=u:r:shell:s0 tcontext=u:object_r:tmpfs:s0 tclass=dir permissive=1
  1101. [    7.289230@1] fb: osd_open, 1497, fb_index=0,fb_rmem_size=26738688
  1102. [    7.300773@0] fb: malloc_osd_memory, cma:c18e3acc
  1103. [    7.301280@3] type=1400 audit(1420070417.132:23): avc: denied { write } for pid=3190 comm="sh" name="/" dev="tmpfs" ino=12495 scontext=u:r:shell:s0 tcontext=u:object_r:tmpfs:s0 tclass=dir permissive=1
  1104. [    7.301309@3] type=1400 audit(1420070417.184:24): avc: denied { getattr } for pid=3187 comm="recovery" path="/sys/devices/virtual/thermal/thermal_zone0/temp" dev="sysfs" ino=11306 scontext=u:r:recovery:s0 tcontext=u:object_r:sysfs:s0 tclass=file permissive=1
  1105. [    7.345993@0] fb: malloc_osd_memory, 1193, base:0x7f800000, size:8388608
  1106. [    7.352656@0] fb: use ion buffer for fb memory, fb_index=0
  1107. [    7.358061@0] fb: OSD0 as afbcd mode,afbc_type=2
  1108. [    7.383532@0] meson-fb fb: create ion_client ecc4dd00, handle=c9b55a00
  1109. [    7.384448@0] meson-fb fb: ion memory(0): created fb at 0x77800000, size 25 MiB
  1110. [    7.391714@0] fb:  0, phy: 0x77800000, vir:0xf1881000, size=26112K
  1111. [    7.391714@0]
  1112. [    7.399562@0] fb: Frame buffer memory assigned at
  1113. [    7.404024@0] fb:  0, phy: 0x77800000, vir:0xf1881000, size=26112K
  1114. [    7.404024@0]
  1115. [    7.411821@0] fb:  0, phy: 0x77800000, vir:0xf1881000, size=26112K
  1116. [    7.411821@0]
  1117. [    7.419655@0] fb: logo_index=0,fb_index=0
  1118. [    7.423606@0] fb: ---------------clear fb0 memory f1881000
  1119. [    7.434457@0] fb: osd[0] canvas.idx =0x40
  1120. [    7.434478@0] fb: osd[0] canvas.addr=0x77800000
  1121. [    7.437560@0] fb: osd[0] canvas.width=3840
  1122. [    7.441632@0] fb: osd[0] canvas.height=2160
  1123. [    7.445793@0] fb: osd[0] frame.width=1920
  1124. [    7.449814@0] fb: osd[0] frame.height=1080
  1125. [    7.453855@0] fb: osd[0] out_addr_id =0x1
  1126. [    7.464801@1] type=1400 audit(1420070417.184:24): avc: denied { getattr } for pid=3187 comm="recovery" path="/sys/devices/virtual/thermal/thermal_zone0/temp" dev="sysfs" ino=11306 scontext=u:r:recovery:s0 tcontext=u:object_r:sysfs:s0 tclass=file permissive=1
  1127. [    7.483571@0] fb: osd[0] enable: 0 (recovery)
  1128. [    7.497134@0] fb: osd[0] enable: 1 (recovery)
  1129. [    7.673532@0] EXT4-fs (mmcblk0p3): recovery complete
  1130. [    7.674018@0] EXT4-fs (mmcblk0p3): mounted filesystem with ordered data mode. Opts:
  1131. [    7.830206@0] EXT4-fs (mmcblk0p20): recovery complete
  1132. [    7.830786@0] EXT4-fs (mmcblk0p20): mounted filesystem with ordered data mode. Opts:
  1133. [    7.852862@0] fb: command 0x5401 not supported (sh)
  1134. [    7.889734@1] EXT4-fs (mmcblk0p18): mounted filesystem with ordered data mode. Opts:
  1135. [    7.922145@1] EXT4-fs (mmcblk0p18): mounted filesystem with ordered data mode. Opts:
  1136. [    7.944223@1] EXT4-fs (mmcblk0p16): mounted filesystem with ordered data mode. Opts:
  1137. [    7.975721@1] EXT4-fs (mmcblk0p19): mounted filesystem without journal. Opts:
  1138. [    8.032056@1] EXT4-fs (mmcblk0p17): mounted filesystem without journal. Opts:
  1139. [    8.061703@1] SELinux:  Context u:object_r:hal_drm_data:s0 is not valid (left unmapped).
  1140. [    8.065305@1] SELinux:  Context u:object_r:log_file:s0 is not valid (left unmapped).
  1141. [    8.073299@1] SELinux:  Context u:object_r:update_data_file:s0 is not valid (left unmapped).
  1142. [    8.105179@1] SELinux:  Context u:object_r:wifi_socket:s0 is not valid (left unmapped).
  1143. [    9.272124@2] read descriptors
  1144. [    9.272168@2] read strings
  1145. [    9.278153@3] EXT4-fs (mmcblk0p18): mounted filesystem with ordered data mode. Opts:
  1146. [   10.070952@2] mtp_open
  1147. [   10.071380@2] mtp_open
  1148. [   10.071409@2] mtp_release
  1149. [   10.872794@2] mtp_open
  1150. [   11.351811@0] vout: aml_tvout_mode_work: monitor_timeout
  1151. [  121.879812@0] fb: mem_free_work, free memory: addr:800000
  1152. [  272.164070@0] EXT4-fs (mmcblk0p18): mounted filesystem with ordered data mode. Opts:
  1153. [  272.682331@0] EXT4-fs (mmcblk0p16): mounted filesystem with ordered data mode. Opts:
  1154. [  273.288343@0] EXT4-fs (mmcblk0p19): mounted filesystem without journal. Opts:
  1155. [  327.007543@0] type=1400 audit(1420070419.972:369): avc: denied { read } for pid=3235 comm="recovery" name="mtp_usb" dev="tmpfs" ino=14523 scontext=u:r:recovery:s0 tcontext=u:object_r:mtp_device:s0 tclass=chr_file permissive=1
  1156. [  327.022089@0] type=1400 audit(1420070736.904:370): avc: denied { getattr } for pid=3187 comm="recovery" path="/vndservice_contexts" dev="rootfs" ino=1583 scontext=u:r:recovery:s0 tcontext=u:object_r:vndservice_contexts_file:s0 tclass=file permissive=1
  1157. [  327.044358@0] type=1400 audit(1420070736.904:370): avc: denied { getattr } for pid=3187 comm="recovery" path="/vndservice_contexts" dev="rootfs" ino=1583 scontext=u:r:recovery:s0 tcontext=u:object_r:vndservice_contexts_file:s0 tclass=file permissive=1
  1158. [  327.066464@0] type=1400 audit(1420070736.904:371): avc: denied { getattr } for pid=3187 comm="recovery" path="/vendor_hwservice_contexts" dev="rootfs" ino=1579 scontext=u:r:recovery:s0 tcontext=u:object_r:hwservice_contexts_file:s0 tclass=file permissive=1
  1159. [  327.089077@0] type=1400 audit(1420070736.904:371): avc: denied { getattr } for pid=3187 comm="recovery" path="/vendor_hwservice_contexts" dev="rootfs" ino=1579 scontext=u:r:recovery:s0 tcontext=u:object_r:hwservice_contexts_file:s0 tclass=file permissive=1
  1160. [  327.111608@0] type=1400 audit(1420070736.944:372): avc: denied { getattr } for pid=3187 comm="recovery" path="/sepolicy" dev="rootfs" ino=1481 scontext=u:r:recovery:s0 tcontext=u:object_r:sepolicy_file:s0 tclass=file permissive=1
  1161. [  356.611962@1] SELinux:  Context u:object_r:boot_data_file:s0 is not valid (left unmapped).
  1162. [  356.620646@2] type=1400 audit(1420070736.944:372): avc: denied { getattr } for pid=3187 comm="recovery" path="/sepolicy" dev="rootfs" ino=1481 scontext=u:r:recovery:s0 tcontext=u:object_r:sepolicy_file:s0 tclass=file permissive=1
  1163. [  356.635512@2] type=1400 audit(1420070766.520:373): avc: denied { getattr } for pid=3187 comm="recovery" path="/system_root/metadata" dev="mmcblk0p18" ino=31 scontext=u:r:recovery:s0 tcontext=u:object_r:metadata_file:s0 tclass=dir permissive=1
  1164. [  356.656972@2] type=1400 audit(1420070766.520:373): avc: denied { getattr } for pid=3187 comm="recovery" path="/system_root/metadata" dev="mmcblk0p18" ino=31 scontext=u:r:recovery:s0 tcontext=u:object_r:metadata_file:s0 tclass=dir permissive=1
  1165. [  356.656999@2] type=1400 audit(1420070766.520:374): avc: denied { getattr } for pid=3187 comm="recovery" path="/system_root/storage" dev="mmcblk0p18" ino=51 scontext=u:r:recovery:s0 tcontext=u:object_r:storage_file:s0 tclass=dir permissive=1
  1166. [  395.040483@0] type=1400 audit(1420070766.520:374): avc: denied { getattr } for pid=3187 comm="recovery" path="/system_root/storage" dev="mmcblk0p18" ino=51 scontext=u:r:recovery:s0 tcontext=u:object_r:storage_file:s0 tclass=dir permissive=1
  1167. [  395.056377@0] type=1400 audit(1420070804.940:375): avc: denied { read write } for pid=3258 comm="recovery" name="0" dev="devpts" ino=3 scontext=u:r:recovery:s0 tcontext=u:object_r:devpts:s0 tclass=chr_file permissive=1
  1168. [  395.076224@3] type=1400 audit(1420070804.940:375): avc: denied { read write } for pid=3258 comm="recovery" name="0" dev="devpts" ino=3 scontext=u:r:recovery:s0 tcontext=u:object_r:devpts:s0 tclass=chr_file permissive=1
  1169. [  395.076255@3] type=1400 audit(1420070804.940:376): avc: denied { open } for pid=3258 comm="recovery" path="/dev/pts/0" dev="devpts" ino=3 scontext=u:r:recovery:s0 tcontext=u:object_r:devpts:s0 tclass=chr_file permissive=1
  1170. [  395.076355@3] type=1400 audit(1420070804.940:376): avc: denied { open } for pid=3258 comm="recovery" path="/dev/pts/0" dev="devpts" ino=3 scontext=u:r:recovery:s0 tcontext=u:object_r:devpts:s0 tclass=chr_file permissive=1
  1171. [  395.076376@3] type=1400 audit(1420070804.940:377): avc: denied { ioctl } for pid=3258 comm="recovery" path="/dev/pts/0" dev="devpts" ino=3 ioctlcmd=0x540e scontext=u:r:recovery:s0 tcontext=u:object_r:devpts:s0 tclass=chr_file permissive=1
  1172. [  395.090592@3] type=1400 audit(1420070804.940:377): avc: denied { ioctl } for pid=3258 comm="recovery" path="/dev/pts/0" dev="devpts" ino=3 ioctlcmd=0x540e scontext=u:r:recovery:s0 tcontext=u:object_r:devpts:s0 tclass=chr_file permissive=1
  1173. [  395.090626@3] type=1400 audit(1420070804.984:378): avc: denied { getattr } for pid=3258 comm="sh" path="/dev/pts/0" dev="devpts" ino=3 scontext=u:r:recovery:s0 tcontext=u:object_r:devpts:s0 tclass=chr_file permissive=1
  1174. [  403.499879@0] type=1400 audit(1420070804.984:378): avc: denied { getattr } for pid=3258 comm="sh" path="/dev/pts/0" dev="devpts" ino=3 scontext=u:r:recovery:s0 tcontext=u:object_r:devpts:s0 tclass=chr_file permissive=1
  1175. [  403.499990@2] logd: logdr: UID=0 GID=0 PID=3261 b tail=0 logMask=19 pid=0 start=0ns timeout=0ns
  1176. [  403.514773@1] type=1400 audit(1420070813.396:379): avc: denied { write } for pid=3261 comm="logcat" name="logdr" dev="tmpfs" ino=370 scontext=u:r:recovery:s0 tcontext=u:object_r:logdr_socket:s0 tclass=sock_file permissive=1
  1177. [  403.515250@1] type=1400 audit(1420070813.396:379): avc: denied { write } for pid=3261 comm="logcat" name="logdr" dev="tmpfs" ino=370 scontext=u:r:recovery:s0 tcontext=u:object_r:logdr_socket:s0 tclass=sock_file permissive=1
  1178. [  403.515278@1] type=1400 audit(1420070813.396:380): avc: denied { connectto } for pid=3261 comm="logcat" path="/dev/socket/logdr" scontext=u:r:recovery:s0 tcontext=u:r:logd:s0 tclass=unix_stream_socket permissive=1
  1179. [  912.620681@1] type=1400 audit(1420070813.396:380): avc: denied { connectto } for pid=3261 comm="logcat" path="/dev/socket/logdr" scontext=u:r:recovery:s0 tcontext=u:r:logd:s0 tclass=unix_stream_socket permissive=1
  1180. [  912.634105@1] type=1400 audit(1420071322.520:381): avc: denied { getattr } for pid=3273 comm="ls" path="/vendor_service_contexts" dev="rootfs" ino=1582 scontext=u:r:recovery:s0 tcontext=u:object_r:nonplat_service_contexts_file:s0 tclass=file permissive=1
  1181. [  912.656845@1] type=1400 audit(1420071322.520:381): avc: denied { getattr } for pid=3273 comm="ls" path="/vendor_service_contexts" dev="rootfs" ino=1582 scontext=u:r:recovery:s0 tcontext=u:object_r:nonplat_service_contexts_file:s0 tclass=file permissive=1
  1182. [  912.678990@1] type=1400 audit(1420071322.520:382): avc: denied { getattr } for pid=3273 comm="ls" path="/vendor_seapp_contexts" dev="rootfs" ino=1581 scontext=u:r:recovery:s0 tcontext=u:object_r:seapp_contexts_file:s0 tclass=file permissive=1
  1183. [  912.679281@1] type=1400 audit(1420071322.520:382): avc: denied { getattr } for pid=3273 comm="ls" path="/vendor_seapp_contexts" dev="rootfs" ino=1581 scontext=u:r:recovery:s0 tcontext=u:object_r:seapp_contexts_file:s0 tclass=file permissive=1
  1184. [  912.679310@1] type=1400 audit(1420071322.520:383): avc: denied { getattr } for pid=3273 comm="ls" path="/plat_service_contexts" dev="rootfs" ino=1137 scontext=u:r:recovery:s0 tcontext=u:object_r:service_contexts_file:s0 tclass=file permissive=1
  1185. [ 1114.550959@3] type=1400 audit(1420071322.520:383): avc: denied { getattr } for pid=3273 comm="ls" path="/plat_service_contexts" dev="rootfs" ino=1137 scontext=u:r:recovery:s0 tcontext=u:object_r:service_contexts_file:s0 tclass=file permissive=1
  1186. [ 1114.567153@3] type=1400 audit(1420071524.448:384): avc: denied { read } for pid=3280 comm="ls" name="app" dev="mmcblk0p16" ino=12 scontext=u:r:recovery:s0 tcontext=u:object_r:vendor_app_file:s0 tclass=dir permissive=1
  1187. [ 1114.586605@3] type=1400 audit(1420071524.448:384): avc: denied { read } for pid=3280 comm="ls" name="app" dev="mmcblk0p16" ino=12 scontext=u:r:recovery:s0 tcontext=u:object_r:vendor_app_file:s0 tclass=dir permissive=1
  1188. [ 1114.605505@3] type=1400 audit(1420071524.448:385): avc: denied { open } for pid=3280 comm="ls" path="/vendor/app" dev="mmcblk0p16" ino=12 scontext=u:r:recovery:s0 tcontext=u:object_r:vendor_app_file:s0 tclass=dir permissive=1
  1189. [ 1317.893661@3] type=1400 audit(1420071524.448:385): avc: denied { open } for pid=3280 comm="ls" path="/vendor/app" dev="mmcblk0p16" ino=12 scontext=u:r:recovery:s0 tcontext=u:object_r:vendor_app_file:s0 tclass=dir permissive=1
  1190. [ 1317.908096@3] type=1400 audit(1420071727.792:386): avc: denied { write } for pid=3187 comm="recovery" name="media" dev="mmcblk0p20" ino=783364 scontext=u:r:recovery:s0 tcontext=u:object_r:media_rw_data_file:s0 tclass=dir permissive=1
  1191. [ 1317.928863@3] type=1400 audit(1420071727.792:386): avc: denied { write } for pid=3187 comm="recovery" name="media" dev="mmcblk0p20" ino=783364 scontext=u:r:recovery:s0 tcontext=u:object_r:media_rw_data_file:s0 tclass=dir permissive=1
  1192. [ 1317.929841@0] audit_log_lost: 34 callbacks suppressed
  1193. [ 1317.929845@0] audit: audit_lost=342 audit_rate_limit=5 audit_backlog_limit=64
  1194. [ 1317.929847@0] audit: rate limit exceeded
  1195. [ 1317.939852@1] fb: command 0x5401 not supported (sh)
RAW Paste Data
We use cookies for various purposes including analytics. By continuing to use Pastebin, you agree to our use of cookies as described in the Cookies Policy. OK, I Understand
Top