Guest User

Untitled

a guest
May 11th, 2020
9
0
Never
Not a member of Pastebin yet? Sign Up, it unlocks many cool features!
text 27.86 KB | None | 0 0
  1. [ 0.000000] Booting Linux on physical CPU 0x0000000000 [0x410fd083]
  2. [ 0.000000] Linux version 5.4.17-2011.0.7.el7uek.aarch64 (mockbuild@ca-buildarm04.us.oracle.com) (gcc version 7.3.0 20180125 (Red Hat 7.3.0-5) (GCC)) #2 SMP Mon Mar 16 21:34:45 PDT 2020
  3. [ 0.000000] Machine model: Raspberry Pi 4 Model B
  4. [ 0.000000] efi: Getting EFI parameters from FDT:
  5. [ 0.000000] efi: EFI v2.80 by Das U-Boot
  6. [ 0.000000] efi: SMBIOS=0x39f20000 MEMRESERVE=0x39f24040
  7. [ 0.000000] Reserved memory: incorrect alignment of CMA region
  8. [ 0.000000] OF: reserved mem: node linux,cma compatible matching fail
  9. [ 0.000000] NUMA: No NUMA configuration found
  10. [ 0.000000] NUMA: Faking a node at [mem 0x0000000000000000-0x00000000fbffffff]
  11. [ 0.000000] NUMA: NODE_DATA [mem 0xfbf2ac00-0xfbf2ceff]
  12. [ 0.000000] Zone ranges:
  13. [ 0.000000] DMA [mem 0x0000000000000000-0x000000003fffffff]
  14. [ 0.000000] DMA32 [mem 0x0000000040000000-0x00000000fbffffff]
  15. [ 0.000000] Normal empty
  16. [ 0.000000] Movable zone start for each node
  17. [ 0.000000] Early memory node ranges
  18. [ 0.000000] node 0: [mem 0x0000000000000000-0x000000000000ffff]
  19. [ 0.000000] node 0: [mem 0x0000000000010000-0x0000000039f1ffff]
  20. [ 0.000000] node 0: [mem 0x0000000039f20000-0x0000000039f3ffff]
  21. [ 0.000000] node 0: [mem 0x0000000039f40000-0x000000003b34ffff]
  22. [ 0.000000] node 0: [mem 0x000000003b350000-0x000000003b35ffff]
  23. [ 0.000000] node 0: [mem 0x000000003b360000-0x000000003b3fffff]
  24. [ 0.000000] node 0: [mem 0x0000000040000000-0x00000000fbffffff]
  25. [ 0.000000] Zeroed struct page in unavailable ranges: 1219 pages
  26. [ 0.000000] Initmem setup node 0 [mem 0x0000000000000000-0x00000000fbffffff]
  27. [ 0.000000] On node 0 totalpages: 63296
  28. [ 0.000000] DMA zone: 15 pages used for memmap
  29. [ 0.000000] DMA zone: 0 pages reserved
  30. [ 0.000000] DMA zone: 15168 pages, LIFO batch:3
  31. [ 0.000000] DMA32 zone: 47 pages used for memmap
  32. [ 0.000000] DMA32 zone: 48128 pages, LIFO batch:3
  33. [ 0.000000] percpu: Embedded 10 pages/cpu s588376 r8192 d58792 u655360
  34. [ 0.000000] pcpu-alloc: s588376 r8192 d58792 u655360 alloc=10*65536
  35. [ 0.000000] pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3
  36. [ 0.000000] Detected PIPT I-cache on CPU0
  37. [ 0.000000] CPU features: detected: EL2 vector hardening
  38. [ 0.000000] ARM_SMCCC_ARCH_WORKAROUND_1 missing from firmware
  39. [ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 63234
  40. [ 0.000000] Policy zone: DMA32
  41. [ 0.000000] Kernel command line: BOOT_IMAGE=/vmlinuz-5.4.17-2011.0.7.el7uek.aarch64 root=UUID=b3c56ec9-7282-4b64-95ba-7d43bb4f0625 ro dwc_otg.lpm_enable=0 console=ttyS1,115200 console=tty1 elevator=deadline rootfstype=btrfs zswap.enabled=1 zswap.max_pool_percent=20
  42. [ 0.000000] Dentry cache hash table entries: 524288 (order: 6, 4194304 bytes, linear)
  43. [ 0.000000] Inode-cache hash table entries: 262144 (order: 5, 2097152 bytes, linear)
  44. [ 0.000000] mem auto-init: stack:off, heap alloc:off, heap free:off
  45. [ 0.000000] software IO TLB: mapped [mem 0x35f20000-0x39f20000] (64MB)
  46. [ 0.000000] Memory: 3908352K/4050944K available (13052K kernel code, 2678K rwdata, 7808K rodata, 7360K init, 9022K bss, 142592K reserved, 0K cma-reserved)
  47. [ 0.000000] random: get_random_u64 called from __kmem_cache_create+0x50/0x630 with crng_init=0
  48. [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
  49. [ 0.000000] ftrace: allocating 42509 entries in 11 pages
  50. [ 0.000000] rcu: Hierarchical RCU implementation.
  51. [ 0.000000] rcu: RCU restricting CPUs from NR_CPUS=4096 to nr_cpu_ids=4.
  52. [ 0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 25 jiffies.
  53. [ 0.000000] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4
  54. [ 0.000000] NR_IRQS: 64, nr_irqs: 64, preallocated irqs: 0
  55. [ 0.000000] GIC: Using split EOI/Deactivate mode
  56. [ 0.000000] rcu: Offload RCU callbacks from CPUs: (none).
  57. [ 0.000000] arch_timer: cp15 timer(s) running at 54.00MHz (phys).
  58. [ 0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0xc743ce346, max_idle_ns: 440795203123 ns
  59. [ 0.000005] sched_clock: 56 bits at 54MHz, resolution 18ns, wraps every 4398046511102ns
  60. [ 0.000182] Console: colour dummy device 80x25
  61. [ 0.000627] printk: console [tty1] enabled
  62. [ 0.000992] Calibrating delay loop (skipped), value calculated using timer frequency.. 108.00 BogoMIPS (lpj=216000)
  63. [ 0.001019] pid_max: default: 32768 minimum: 301
  64. [ 0.001469] LSM: Security Framework initializing
  65. [ 0.001758] Yama: becoming mindful.
  66. [ 0.001826] SELinux: Initializing.
  67. [ 0.002313] Mount-cache hash table entries: 8192 (order: 0, 65536 bytes, linear)
  68. [ 0.002361] Mountpoint-cache hash table entries: 8192 (order: 0, 65536 bytes, linear)
  69. [ 0.005169] ASID allocator initialised with 32768 entries
  70. [ 0.005331] rcu: Hierarchical SRCU implementation.
  71. [ 0.008681] Remapping and enabling EFI services.
  72. [ 0.009425] smp: Bringing up secondary CPUs ...
  73. [ 0.010107] Detected PIPT I-cache on CPU1
  74. [ 0.010171] CPU1: Booted secondary processor 0x0000000001 [0x410fd083]
  75. [ 0.010941] Detected PIPT I-cache on CPU2
  76. [ 0.010985] CPU2: Booted secondary processor 0x0000000002 [0x410fd083]
  77. [ 0.011727] Detected PIPT I-cache on CPU3
  78. [ 0.011771] CPU3: Booted secondary processor 0x0000000003 [0x410fd083]
  79. [ 0.011891] smp: Brought up 1 node, 4 CPUs
  80. [ 0.011954] SMP: Total of 4 processors activated.
  81. [ 0.011968] CPU features: detected: 32-bit EL0 Support
  82. [ 0.011983] CPU features: detected: CRC32 instructions
  83. [ 0.060627] CPU features: emulated: Privileged Access Never (PAN) using TTBR0_EL1 switching
  84. [ 0.060660] CPU: All CPU(s) started at EL2
  85. [ 0.060743] alternatives: patching kernel code
  86. [ 0.062942] devtmpfs: initialized
  87. [ 0.068825] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns
  88. [ 0.068866] futex hash table entries: 1024 (order: 0, 65536 bytes, linear)
  89. [ 0.069281] pinctrl core: initialized pinctrl subsystem
  90. [ 0.070442] SMBIOS 3.0 present.
  91. [ 0.070469] DMI: raspberrypi rpi/rpi, BIOS 2020.01-rc4 04/16/2020
  92. [ 0.071380] NET: Registered protocol family 16
  93. [ 0.071898] DMA: preallocated 256 KiB pool for atomic allocations
  94. [ 0.071926] audit: initializing netlink subsys (disabled)
  95. [ 0.072155] audit: type=2000 audit(0.068:1): state=initialized audit_enabled=0 res=1
  96. [ 0.073258] cpuidle: using governor menu
  97. [ 0.073549] hw-breakpoint: found 6 breakpoint and 4 watchpoint registers.
  98. [ 0.074655] Serial: AMBA PL011 UART driver
  99. [ 0.101006] HugeTLB registered 16.0 GiB page size, pre-allocated 0 pages
  100. [ 0.101035] HugeTLB registered 512 MiB page size, pre-allocated 0 pages
  101. [ 0.101051] HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages
  102. [ 0.883063] ACPI: Interpreter disabled.
  103. [ 0.883550] iommu: Default domain type: Passthrough
  104. [ 0.883846] vgaarb: loaded
  105. [ 0.884521] SCSI subsystem initialized
  106. [ 0.884820] libata version 3.00 loaded.
  107. [ 0.885082] usbcore: registered new interface driver usbfs
  108. [ 0.885140] usbcore: registered new interface driver hub
  109. [ 0.885235] usbcore: registered new device driver usb
  110. [ 0.885396] pps_core: LinuxPPS API ver. 1 registered
  111. [ 0.885411] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
  112. [ 0.885439] PTP clock support registered
  113. [ 0.885698] EDAC MC: Ver: 3.0.0
  114. [ 0.886274] Registered efivars operations
  115. [ 0.887391] NetLabel: Initializing
  116. [ 0.887411] NetLabel: domain hash size = 128
  117. [ 0.887422] NetLabel: protocols = UNLABELED CIPSOv4 CALIPSO
  118. [ 0.887492] NetLabel: unlabeled traffic allowed by default
  119. [ 0.887954] clocksource: Switched to clocksource arch_sys_counter
  120. [ 0.966490] VFS: Disk quotas dquot_6.6.0
  121. [ 0.966632] VFS: Dquot-cache hash table entries: 8192 (order 0, 65536 bytes)
  122. [ 0.967108] simple-framebuffer 3e29a000.framebuffer: framebuffer at 0x3e29a000, 0x960000 bytes, mapped to 0x(____ptrval____)
  123. [ 0.967137] simple-framebuffer 3e29a000.framebuffer: format=a8r8g8b8, mode=1920x1280x32, linelength=7680
  124. [ 0.989206] Console: switching to colour frame buffer device 240x80
  125. [ 1.009741] simple-framebuffer 3e29a000.framebuffer: fb0: simplefb registered!
  126. [ 1.010008] pnp: PnP ACPI: disabled
  127. [ 1.017440] thermal_sys: Registered thermal governor 'fair_share'
  128. [ 1.017445] thermal_sys: Registered thermal governor 'step_wise'
  129. [ 1.017552] thermal_sys: Registered thermal governor 'user_space'
  130. [ 1.017644] thermal_sys: Registered thermal governor 'power_allocator'
  131. [ 1.018269] NET: Registered protocol family 2
  132. [ 1.019095] tcp_listen_portaddr_hash hash table entries: 2048 (order: 0, 65536 bytes, linear)
  133. [ 1.019294] TCP established hash table entries: 32768 (order: 2, 262144 bytes, linear)
  134. [ 1.019593] TCP bind hash table entries: 32768 (order: 3, 524288 bytes, linear)
  135. [ 1.020155] TCP: Hash tables configured (established 32768 bind 32768)
  136. [ 1.020383] UDP hash table entries: 2048 (order: 0, 65536 bytes, linear)
  137. [ 1.020531] UDP-Lite hash table entries: 2048 (order: 0, 65536 bytes, linear)
  138. [ 1.020890] NET: Registered protocol family 1
  139. [ 1.020984] NET: Registered protocol family 44
  140. [ 1.021061] PCI: CLS 0 bytes, default 64
  141. [ 1.021350] Trying to unpack rootfs image as initramfs...
  142. [ 2.177027] Freeing initrd memory: 22016K
  143. [ 2.178106] hw perfevents: enabled with armv8_cortex_a72 PMU driver, 7 counters available
  144. [ 2.178373] kvm [1]: IPA Size Limit: 44bits
  145. [ 2.178835] kvm [1]: GICV region size/alignment is unsafe, using trapping (reduced performance)
  146. [ 2.179117] kvm [1]: vgic interrupt IRQ1
  147. [ 2.179325] kvm [1]: Hyp mode initialized successfully
  148. [ 2.181384] Initialise system trusted keyrings
  149. [ 2.181493] Key type blacklist registered
  150. [ 2.181796] workingset: timestamp_bits=44 max_order=16 bucket_order=0
  151. [ 2.189973] zbud: loaded
  152. [ 2.222991] NET: Registered protocol family 38
  153. [ 2.223090] Key type asymmetric registered
  154. [ 2.223156] Asymmetric key parser 'x509' registered
  155. [ 2.223233] Key type pkcs7_test registered
  156. [ 2.223351] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 246)
  157. [ 2.223707] io scheduler mq-deadline registered
  158. [ 2.223783] io scheduler kyber registered
  159. [ 2.224069] io scheduler bfq registered
  160. [ 2.224405] atomic64_test: passed
  161. [ 2.229913] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
  162. [ 2.231227] efifb: probing for efifb
  163. [ 2.231328] efifb: framebuffer at 0x3e29a000, using 9600k, total 9600k
  164. [ 2.231429] efifb: mode is 1920x1280x32, linelength=7680, pages=1
  165. [ 2.231520] efifb: scrolling: redraw
  166. [ 2.231580] efifb: Truecolor: size=8:8:8:8, shift=24:16:8:0
  167. [ 2.231690] checking generic (3e29a000 960000) vs hw (3e29a000 960000)
  168. [ 2.231695] fb0: switching to EFI VGA from simple
  169. [ 2.232053] Console: switching to colour dummy device 80x25
  170. [ 2.254090] Console: switching to colour frame buffer device 240x80
  171. [ 2.274619] fb0: EFI VGA frame buffer device
  172. [ 2.282957] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled
  173. [ 2.290695] printk: console [ttyS1] disabled
  174. [ 2.290847] fe215040.serial: ttyS1 at MMIO 0x0 (irq = 19, base_baud = 62499999) is a 16550
  175. [ 3.907315] printk: console [ttyS1] enabled
  176. [ 3.917710] msm_serial: driver initialized
  177. [ 3.928491] cacheinfo: Unable to detect cache hierarchy for CPU 0
  178. [ 3.940404] bcm2835-power bcm2835-power: Broadcom BCM2835 power domains driver
  179. [ 3.954086] libphy: Fixed MDIO Bus: probed
  180. [ 3.963594] VFIO - User Level meta-driver version: 0.3
  181. [ 3.973991] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
  182. [ 3.985685] ehci-pci: EHCI PCI platform driver
  183. [ 3.995251] ehci-orion: EHCI orion driver
  184. [ 4.004463] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
  185. [ 4.015872] ohci-pci: OHCI PCI platform driver
  186. [ 4.025521] uhci_hcd: USB Universal Host Controller Interface driver
  187. [ 4.037249] usbcore: registered new interface driver usbserial_generic
  188. [ 4.048959] usbserial: USB Serial support registered for generic
  189. [ 4.060295] mousedev: PS/2 mouse device common for all mice
  190. [ 4.074208] bcm2835-wdt bcm2835-wdt: Broadcom BCM2835 watchdog timer
  191. [ 4.086661] device-mapper: uevent: version 1.0.3
  192. [ 4.096825] device-mapper: ioctl: 4.41.0-ioctl (2019-09-16) initialised: dm-devel@redhat.com
  193. [ 4.111421] ledtrig-cpu: registered to indicate activity on CPUs
  194. [ 4.123142] EFI Variables Facility v0.08 2004-May-17
  195. [ 4.133490] efivars: get_next_variable: status=8000000000000003
  196. [ 4.144935] hidraw: raw HID events driver (C) Jiri Kosina
  197. [ 4.155869] usbcore: registered new interface driver usbhid
  198. [ 4.166705] usbhid: USB HID core driver
  199. [ 4.175893] bcm2835-mbox fe00b880.mailbox: mailbox enabled
  200. [ 4.187449] drop_monitor: Initializing network drop monitor service
  201. [ 4.199176] Initializing XFRM netlink socket
  202. [ 4.209215] NET: Registered protocol family 10
  203. [ 4.219634] Segment Routing with IPv6
  204. [ 4.228520] NET: Registered protocol family 17
  205. [ 4.238181] bridge: filtering via arp/ip/ip6tables is no longer available by default. Update your scripts to load br_netfilter if you need this.
  206. [ 4.257482] registered taskstats version 1
  207. [ 4.267005] Loading compiled-in X.509 certificates
  208. [ 4.293255] Loaded X.509 cert 'Oracle CA Server: 4f79df95d9439c19bc4c789f70b0abb75932f9ea'
  209. [ 4.310461] Loaded X.509 cert 'Oracle Linux Kernel Module Signing Key: 2bb352412969a3653f0eb6021763408ebb9bb5ab'
  210. [ 4.513614] Loaded X.509 cert 'Oracle America, Inc.: Ksplice Kernel Module Signing Key: 09010ebef5545fa7c54b626ef518e077b5b1ee4c'
  211. [ 4.531078] Loaded X.509 cert 'Oracle Corporation: 7f559b8e9d9e05183480a7149e5a1de0bc265ada'
  212. [ 4.545163] zswap: loaded using pool lzo/zbud
  213. [ 4.555473] Key type ._fscrypt registered
  214. [ 4.564881] Key type .fscrypt registered
  215. [ 4.590643] Key type big_key registered
  216. [ 4.613485] Key type encrypted registered
  217. [ 4.628021] fe201000.serial: ttyAMA0 at MMIO 0xfe201000 (irq = 16, base_baud = 0) is a PL011 rev2
  218. [ 4.642701] serial serial0: tty port ttyAMA0 registered
  219. [ 4.655503] raspberrypi-firmware soc:firmware: Attached to firmware from 2019-11-29 18:44
  220. [ 4.674535] hctosys: unable to open rtc device (rtc0)
  221. [ 4.693608] Freeing unused kernel memory: 7360K
  222. [ 4.724004] rodata_test: all tests were successful
  223. [ 4.734220] Run /init as init process
  224. [ 4.829281] systemd[1]: Inserted module 'ip_tables'
  225. [ 5.142515] efivars: get_next_variable: status=8000000000000003
  226. [ 5.154577] random: systemd: uninitialized urandom read (16 bytes read)
  227. [ 5.168477] random: systemd: uninitialized urandom read (16 bytes read)
  228. [ 5.180627] random: systemd: uninitialized urandom read (16 bytes read)
  229. [ 5.928518] systemd[1]: systemd 219 running in system mode. (+PAM +AUDIT +SELINUX +IMA -APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 -SECCOMP +BLKID +ELFUTILS +KMOD +IDN)
  230. [ 5.953990] systemd[1]: Detected architecture arm64.
  231. [ 5.964650] systemd[1]: Running in initial RAM disk.
  232. [ 5.993646] systemd[1]: Set hostname to <rpi>.
  233. [ 6.156522] urandom_read: 3 callbacks suppressed
  234. [ 6.156528] random: systemd: uninitialized urandom read (16 bytes read)
  235. [ 6.179732] random: systemd: uninitialized urandom read (16 bytes read)
  236. [ 6.194226] random: systemd: uninitialized urandom read (16 bytes read)
  237. [ 6.228514] systemd[1]: Reached target Local File Systems.
  238. [ 6.246202] systemd[1]: Reached target Swap.
  239. [ 6.262588] systemd[1]: Started Dispatch Password Requests to Console Directory Watch.
  240. [ 6.285277] systemd[1]: Created slice Root Slice.
  241. [ 6.302486] systemd[1]: Created slice System Slice.
  242. [ 6.319514] systemd[1]: Listening on udev Control Socket.
  243. [ 6.683846] usb_phy_generic phy: phy supply vcc not found, using dummy regulator
  244. [ 6.737398] bcmgenet fd580000.ethernet: failed to get enet clock
  245. [ 6.737411] bcmgenet fd580000.ethernet: GENET 5.0 EPHY: 0x0000
  246. [ 6.737421] bcmgenet fd580000.ethernet: failed to get enet-wol clock
  247. [ 6.737429] bcmgenet fd580000.ethernet: failed to get enet-eee clock
  248. [ 6.760873] sdhci: Secure Digital Host Controller Interface driver
  249. [ 6.760879] sdhci: Copyright(c) Pierre Ossman
  250. [ 6.774526] sdhci-pltfm: SDHCI platform and OF driver helper
  251. [ 6.841347] sdhci-iproc fe300000.sdhci: allocated mmc-pwrseq
  252. [ 6.883745] dwc2 fe980000.usb: fe980000.usb supply vusb_d not found, using dummy regulator
  253. [ 6.901049] dwc2 fe980000.usb: fe980000.usb supply vusb_a not found, using dummy regulator
  254. [ 6.902972] mmc0: SDHCI controller on fe300000.sdhci [fe300000.sdhci] using PIO
  255. [ 6.948000] libphy: bcmgenet MII bus: probed
  256. [ 6.960962] mmc0: queuing unknown CIS tuple 0x80 (2 bytes)
  257. [ 6.972049] mmc1: SDHCI controller on fe340000.emmc2 [fe340000.emmc2] using ADMA
  258. [ 6.980082] mmc0: queuing unknown CIS tuple 0x80 (3 bytes)
  259. [ 6.997580] mmc0: queuing unknown CIS tuple 0x80 (3 bytes)
  260. [ 7.000808] mmc0: queuing unknown CIS tuple 0x80 (7 bytes)
  261. [ 7.002726] mmc0: queuing unknown CIS tuple 0x80 (3 bytes)
  262. [ 7.035477] dwc2 fe980000.usb: EPs: 8, dedicated fifos, 4080 entries in SPRAM
  263. [ 7.056106] unimac-mdio unimac-mdio.-19: Broadcom UniMAC MDIO bus
  264. [ 7.096497] random: fast init done
  265. [ 7.130394] mmc1: new ultra high speed DDR50 SDHC card at address 59b4
  266. [ 7.153879] mmc0: new high speed SDIO card at address 0001
  267. [ 7.167494] mmcblk1: mmc1:59b4 USD00 15.0 GiB
  268. [ 7.182818] mmcblk1: p1 p2 p3 p4
  269. [ 7.417064] cfg80211: Loading compiled-in X.509 certificates for regulatory database
  270. [ 7.431464] cfg80211: Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7'
  271. [ 7.443532] platform regulatory.0: Direct firmware load for regulatory.db failed with error -2
  272. [ 7.458550] cfg80211: failed to load regulatory.db
  273. [ 7.504000] raid6: neonx8 gen() 1435 MB/s
  274. [ 7.555994] brcmfmac: brcmf_fw_alloc_request: using brcm/brcmfmac43455-sdio for chip BCM4345/6
  275. [ 7.571028] brcmfmac mmc0:0001:1: Direct firmware load for brcm/brcmfmac43455-sdio.raspberrypi,4-model-b.txt failed with error -2
  276. [ 7.579984] raid6: neonx8 xor() 466 MB/s
  277. [ 7.588313] brcmfmac mmc0:0001:1: Direct firmware load for brcm/brcmfmac43455-sdio.txt failed with error -2
  278. [ 7.613166] usbcore: registered new interface driver brcmfmac
  279. [ 7.663977] raid6: neonx4 gen() 1458 MB/s
  280. [ 7.739995] raid6: neonx4 xor() 652 MB/s
  281. [ 7.815970] raid6: neonx2 gen() 1683 MB/s
  282. [ 7.833094] Bluetooth: Core ver 2.22
  283. [ 7.842079] NET: Registered protocol family 31
  284. [ 7.851830] Bluetooth: HCI device and connection manager initialized
  285. [ 7.863552] Bluetooth: HCI socket layer initialized
  286. [ 7.873752] Bluetooth: L2CAP socket layer initialized
  287. [ 7.884087] Bluetooth: SCO socket layer initialized
  288. [ 7.894174] raid6: neonx2 xor() 621 MB/s
  289. [ 7.967965] raid6: neonx1 gen() 1655 MB/s
  290. [ 8.043986] raid6: neonx1 xor() 443 MB/s
  291. [ 8.119999] raid6: int64x8 gen() 821 MB/s
  292. [ 8.195998] raid6: int64x8 xor() 347 MB/s
  293. [ 8.271970] raid6: int64x4 gen() 1756 MB/s
  294. [ 8.347991] raid6: int64x4 xor() 513 MB/s
  295. [ 8.423959] raid6: int64x2 gen() 1663 MB/s
  296. [ 8.499973] raid6: int64x2 xor() 442 MB/s
  297. [ 8.575960] raid6: int64x1 gen() 911 MB/s
  298. [ 8.631997] brcmfmac: brcmf_sdio_htclk: HT Avail timeout (1000000): clkctl 0x50
  299. [ 8.652035] raid6: int64x1 xor() 325 MB/s
  300. [ 8.661159] raid6: using algorithm int64x4 gen() 1756 MB/s
  301. [ 8.671535] raid6: .... xor() 513 MB/s, rmw enabled
  302. [ 8.681303] raid6: using neon recovery algorithm
  303. [ 8.762152] xor: measuring software checksum speed
  304. [ 8.807972] 8regs : 2528.000 MB/sec
  305. [ 8.855955] 32regs : 2448.000 MB/sec
  306. [ 8.903961] arm64_neon: 2432.000 MB/sec
  307. [ 8.912914] xor: using function: 8regs (2528.000 MB/sec)
  308. [ 9.312213] Btrfs loaded, crc32c=crc32c-generic
  309. [ 9.324671] BTRFS: device fsid b3c56ec9-7282-4b64-95ba-7d43bb4f0625 devid 1 transid 947 /dev/mmcblk1p4
  310. [ 9.440035] BTRFS info (device mmcblk1p4): disk space caching is enabled
  311. [ 9.479100] BTRFS info (device mmcblk1p4): enabling ssd optimizations
  312. [ 10.211367] systemd-journald[210]: Received SIGTERM from PID 1 (systemd).
  313. [ 10.289702] printk: systemd: 10 output lines suppressed due to ratelimiting
  314. [ 10.460596] SELinux: Disabled at runtime.
  315. [ 10.532114] audit: type=1404 audit(10.527:2): enforcing=0 old_enforcing=0 auid=4294967295 ses=4294967295 enabled=0 old-enabled=1 lsm=selinux res=1
  316. [ 11.149018] BTRFS info (device mmcblk1p4): disk space caching is enabled
  317. [ 11.256344] systemd-journald[379]: Received request to flush runtime journal from PID 1
  318. [ 13.753641] brcm-pcie fd500000.pcie: host bridge /scb/pcie@7d500000 ranges:
  319. [ 13.765740] brcm-pcie fd500000.pcie: No bus range found for /scb/pcie@7d500000, using [bus 00-ff]
  320. [ 13.793462] brcm-pcie fd500000.pcie: MEM 0x0600000000..0x0603ffffff -> 0x00f8000000
  321. [ 13.808563] brcm-pcie fd500000.pcie: IB MEM 0x0000000000..0x00bfffffff -> 0x0000000000
  322. [ 13.866702] vchiq: module is from the staging directory, the quality is unknown, you have been warned.
  323. [ 13.889862] brcm-pcie fd500000.pcie: link up, 5 GT/s x1 (SSC)
  324. [ 13.892818] vchiq: vchiq_init_state: slot_zero = (____ptrval____)
  325. [ 13.908788] brcm-pcie fd500000.pcie: PCI host bridge to bus 0000:00
  326. [ 13.925721] pci_bus 0000:00: root bus resource [bus 00-ff]
  327. [ 13.941664] pci_bus 0000:00: root bus resource [mem 0x600000000-0x603ffffff] (bus address [0xf8000000-0xfbffffff])
  328. [ 13.957945] pci 0000:00:00.0: [14e4:2711] type 01 class 0x060400
  329. [ 13.969505] pci 0000:00:00.0: PME# supported from D0 D3hot
  330. [ 13.971981] pci 0000:00:00.0: bridge configuration invalid ([bus 00-00]), reconfiguring
  331. [ 13.994059] pci 0000:01:00.0: [1106:3483] type 00 class 0x0c0330
  332. [ 14.005445] pci 0000:01:00.0: reg 0x10: [mem 0x00000000-0x00000fff 64bit]
  333. [ 14.005668] pci 0000:01:00.0: PME# supported from D0 D3cold
  334. [ 14.020318] pci_bus 0000:01: busn_res: [bus 01-ff] end is updated to 01
  335. [ 14.040786] pci 0000:00:00.0: BAR 14: assigned [mem 0x600000000-0x6000fffff]
  336. [ 14.053383] pci 0000:01:00.0: BAR 0: assigned [mem 0x600000000-0x600000fff 64bit]
  337. [ 14.066277] pci 0000:00:00.0: PCI bridge to [bus 01]
  338. [ 14.076599] pci 0000:00:00.0: bridge window [mem 0x600000000-0x6000fffff]
  339. [ 14.089286] pcieport 0000:00:00.0: enabling device (0000 -> 0002)
  340. [ 14.100974] pcieport 0000:00:00.0: PME: Signaling with IRQ 41
  341. [ 14.112618] pcieport 0000:00:00.0: AER: enabled with IRQ 41
  342. [ 14.124057] pci 0000:01:00.0: enabling device (0000 -> 0002)
  343. [ 14.127346] mc: Linux media interface: v0.10
  344. [ 14.135288] pci 0000:01:00.0: quirk_usb_early_handoff+0x0/0x9d4 took 10926 usecs
  345. [ 14.157985] xhci_hcd 0000:01:00.0: xHCI Host Controller
  346. [ 14.168864] xhci_hcd 0000:01:00.0: new USB bus registered, assigned bus number 1
  347. [ 14.170885] xhci_hcd 0000:01:00.0: hcc params 0x002841eb hci version 0x100 quirks 0x0000000000000090
  348. [ 14.198539] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.04
  349. [ 14.198548] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
  350. [ 14.198555] usb usb1: Product: xHCI Host Controller
  351. [ 14.198561] usb usb1: Manufacturer: Linux 5.4.17-2011.0.7.el7uek.aarch64 xhci-hcd
  352. [ 14.198567] usb usb1: SerialNumber: 0000:01:00.0
  353. [ 14.199159] hub 1-0:1.0: USB hub found
  354. [ 14.199228] hub 1-0:1.0: 1 port detected
  355. [ 14.199779] xhci_hcd 0000:01:00.0: xHCI Host Controller
  356. [ 14.200030] xhci_hcd 0000:01:00.0: new USB bus registered, assigned bus number 2
  357. [ 14.200050] xhci_hcd 0000:01:00.0: Host supports USB 3.0 SuperSpeed
  358. [ 14.200174] usb usb2: We don't know the algorithms for LPM for this host, disabling LPM.
  359. [ 14.200309] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 5.04
  360. [ 14.200316] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
  361. [ 14.200323] usb usb2: Product: xHCI Host Controller
  362. [ 14.200331] usb usb2: Manufacturer: Linux 5.4.17-2011.0.7.el7uek.aarch64 xhci-hcd
  363. [ 14.200337] usb usb2: SerialNumber: 0000:01:00.0
  364. [ 14.200878] hub 2-0:1.0: USB hub found
  365. [ 14.200929] hub 2-0:1.0: 4 ports detected
  366. [ 14.265647] videodev: Linux video capture interface: v2.00
  367. [ 14.293320] snd_bcm2835: module is from the staging directory, the quality is unknown, you have been warned.
  368. [ 14.459288] bcm2835_audio bcm2835_audio: card created with 8 channels
  369. [ 14.525706] EXT4-fs (mmcblk1p2): mounted filesystem with ordered data mode. Opts: (null)
  370. [ 14.536824] bcm2835_v4l2: module is from the staging directory, the quality is unknown, you have been warned.
  371. [ 14.539378] usb 1-1: new high-speed USB device number 2 using xhci_hcd
  372. [ 14.580037] Adding 262080k swap on /dev/mmcblk1p3. Priority:-2 extents:1 across:262080k SSFS
  373. [ 14.597470] usb 1-1: New USB device found, idVendor=2109, idProduct=3431, bcdDevice= 4.21
  374. [ 14.597487] usb 1-1: New USB device strings: Mfr=0, Product=1, SerialNumber=0
  375. [ 14.597495] usb 1-1: Product: USB2.0 Hub
  376. [ 14.599228] hub 1-1:1.0: USB hub found
  377. [ 14.599476] hub 1-1:1.0: 4 ports detected
  378. [ 14.892016] usb 1-1.4: new high-speed USB device number 3 using xhci_hcd
  379. [ 14.924475] usb 1-1.4: New USB device found, idVendor=1a40, idProduct=0101, bcdDevice= 1.00
  380. [ 14.924486] usb 1-1.4: New USB device strings: Mfr=0, Product=1, SerialNumber=0
  381. [ 14.950808] usb 1-1.4: Product: USB 2.0 Hub [MTT]
  382. [ 14.953689] hub 1-1.4:1.0: USB hub found
  383. [ 14.970018] hub 1-1.4:1.0: 4 ports detected
  384. [ 15.360031] usb 1-1.4.3: new low-speed USB device number 4 using xhci_hcd
  385. [ 15.585631] usb 1-1.4.3: New USB device found, idVendor=04b3, idProduct=3025, bcdDevice= 1.09
  386. [ 15.599173] usb 1-1.4.3: New USB device strings: Mfr=1, Product=2, SerialNumber=0
  387. [ 15.611786] usb 1-1.4.3: Product: USB NetVista Full Width Keyboard.
  388. [ 15.623113] usb 1-1.4.3: Manufacturer: LITE-ON Technology
  389. [ 15.648565] input: LITE-ON Technology USB NetVista Full Width Keyboard. as /devices/platform/scb/fd500000.pcie/pci0000:00/0000:00:00.0/0000:01:00.0/usb1/1-1/1-1.4/1-1.4.3/1-1.4.3:1.0/0003:04B3:3025.0001/input/input0
  390. [ 15.732760] hid-generic 0003:04B3:3025.0001: input,hidraw0: USB HID v1.10 Keyboard [LITE-ON Technology USB NetVista Full Width Keyboard.] on usb-0000:01:00.0-1.4.3/input0
  391. [ 15.920010] usb 1-1.4.4: new full-speed USB device number 5 using xhci_hcd
  392. [ 16.070793] bcmgenet fd580000.ethernet: configuring instance for external RGMII (RX delay)
  393. [ 16.085093] bcmgenet fd580000.ethernet eth0: Link is Down
  394. [ 16.158616] usb 1-1.4.4: New USB device found, idVendor=093a, idProduct=2533, bcdDevice= 1.00
  395. [ 16.172598] usb 1-1.4.4: New USB device strings: Mfr=0, Product=2, SerialNumber=0
  396. [ 16.185323] usb 1-1.4.4: Product: Gaming Mouse
  397. [ 16.206073] input: Gaming Mouse as /devices/platform/scb/fd500000.pcie/pci0000:00/0000:00:00.0/0000:01:00.0/usb1/1-1/1-1.4/1-1.4.4/1-1.4.4:1.0/0003:093A:2533.0002/input/input1
  398. [ 16.229017] hid-generic 0003:093A:2533.0002: input,hidraw1: USB HID v1.11 Mouse [Gaming Mouse] on usb-0000:01:00.0-1.4.4/input0
  399. [ 16.255855] input: Gaming Mouse Keyboard as /devices/platform/scb/fd500000.pcie/pci0000:00/0000:00:00.0/0000:01:00.0/usb1/1-1/1-1.4/1-1.4.4/1-1.4.4:1.1/0003:093A:2533.0003/input/input3
  400. [ 16.336411] input: Gaming Mouse Consumer Control as /devices/platform/scb/fd500000.pcie/pci0000:00/0000:00:00.0/0000:01:00.0/usb1/1-1/1-1.4/1-1.4.4/1-1.4.4:1.1/0003:093A:2533.0003/input/input4
  401. [ 16.360722] hid-generic 0003:093A:2533.0003: input,hiddev96,hidraw2: USB HID v1.11 Keyboard [Gaming Mouse] on usb-0000:01:00.0-1.4.4/input1
  402. [ 21.216106] bcmgenet fd580000.ethernet eth0: Link is Up - 1Gbps/Full - flow control rx/tx
  403. [ 21.224586] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
  404. [ 28.589370] random: crng init done
  405. [ 28.592887] random: 1 urandom warning(s) missed due to ratelimiting
  406. [ 69.093635] usb 1-1.4: USB disconnect, device number 3
  407. [ 69.098964] usb 1-1.4.3: USB disconnect, device number 4
  408. [ 69.181629] usb 1-1.4.4: USB disconnect, device number 5
Add Comment
Please, Sign In to add comment