Advertisement
Not a member of Pastebin yet?
Sign Up,
it unlocks many cool features!
- ------------------------------------------------------------------------------
- PDC - Processor Dependent Code - Version 1.3
- (c) Copyright 1990-1993, Hewlett-Packard Company, All rights reserved
- ------------------------------------------------------------------------------
- 288 MB of memory configured and tested.
- Primary boot path: 56/52.6 (dec)
- Alternate boot path: 56/52.4 (dec)
- Processor is booting from first available device.
- To discontinue, press any key within 10 seconds.
- ------- Main Menu -------------------------------------------------------------
- Command Description
- ------- -----------
- BOot [PRI|ALT|<path>] Boot from specified path
- PAth [PRI|ALT] [<path>] Display or modify a path
- SEArch [DIsplay|IPL] [<path>] Search for boot devices
- COnfiguration menu Displays or sets boot values
- INformation menu Displays hardware information
- SERvice menu Displays service commands
- DIsplay Redisplay the current menu
- HElp [<menu>|<command>] Display help for menu or command
- RESET Restart the system
- -------
- Main Menu: Enter command or menu > sea ipl
- Searching for devices with bootable media.
- This may take several minutes.
- To discontinue, press any key.
- Path Number Device Path Device Type and Utilities
- ----------- ----------- -------------------------
- P0 56/52.3 (dec) Random access media
- IPL
- P1 56/52.4 (dec) Random access media
- IPL
- P2 56/52.6 (dec) Random access media
- IPL
- P3 60/6.0 (dec) LAN Module
- Main Menu: Enter command or menu > boot p1
- Interact with IPL (Y or N)?> y
- Booting...
- Boot IO Dependent Code (IODC) revision 4
- HARD Booted.
- palo ipl 1.95 root@mkhppa3 Thu Apr 17 20:15:17 UTC 2014
- Boot image contains:
- 0/vmlinux32 3356006(0) bytes @ 0xb6000
- 0/vmlinux64 4311361(0) bytes @ 0x3e9800
- 0/ramdisk 6757315 bytes @ 0x806800
- Information: No console specified on kernel command line. This is normal.
- PALO will choose the console currently used by firmware (serial).Current command line:
- 0/vmlinux initrd=0/ramdisk panic_timeout=60 panic=-1 mirror/protocol=http preseed/url=http://backup.parisc-linux.org/debian/preseed.cfg mirror/http/proxy__=http://proxy:8080 console=ttyB0 TERM=vt102
- 0: 0/vmlinux
- 1: initrd=0/ramdisk
- 2: panic_timeout=60
- 3: panic=-1
- 4: mirror/protocol=http
- 5: preseed/url=http://backup.parisc-linux.org/debian/preseed.cfg
- 6: mirror/http/proxy__=http://proxy:8080
- 7: console=ttyB0
- 8: TERM=vt102
- <#> edit the numbered field
- 'b' boot with this command line
- 'r' restore command line
- 'l' list dir
- 'x' reset and reboot machine
- ? b
- Command line for kernel: ' panic_timeout=60 panic=-1 mirror/protocol=http preseed/url=http://backup.parisc-linux.org/debian/preseed.cfg mirror/http/proxy__=http://proxy:8080 console=ttyB0 TERM=vt102 palo_kernel=0/vmlinux'
- Selected kernel: /vmlinux from partition 0
- Selected ramdisk: /ramdisk from partition 0
- Warning: kernel name doesn't end with 32 or 64 -- Guessing... Choosing 32-bit kerneluncompressing Linux kernel.................................................................................................................................................................................................................................................
- ELF32 executable
- Entry 00100000 first 00100000 n 2
- Segment 0 load 00100000 size 158648 mediaptr 0x1000
- Segment 1 load 00127000 size 6045124 mediaptr 0x28000
- Loading ramdisk 6757315 bytes @ 1057d000...
- Branching to kernel entry point 0x00100000. If this is the last
- message you see, you may need to switch your console. This is
- a common symptom -- search the FAQ and mailing list at parisc-linux.org
- [ 0.000000] Initializing cgroup subsys cpuset
- [ 0.000000] Initializing cgroup subsys cpu
- [ 0.000000] Initializing cgroup subsys cpuacct
- [ 0.000000] Linux version 3.16.0-4-parisc (debian-kernel@lists.debian.org) (gcc version 4.8.4 (Debian 4.8.4-1) ) #1 Debian 3.16.7-ckt4-1 (2015-01-16)
- [ 0.000000] unwind_init: start = 0x105e1a48, end = 0x106218b8, entries = 16359
- [ 0.000000] FP[0] enabled: Rev 1 Model 13
- [ 0.000000] The 32-bit Kernel has started...
- [ 0.000000] Default page size is 4KB.
- [ 0.000000] bootconsole [ttyB0] enabled
- [ 0.000000] Initialized PDC Console for debugging.
- [ 0.000000] Determining PDC firmware type: System Map.
- [ 0.000000] model 00004800 00000481 00000000 00000000 392dde1c 100000f0 00000004 00000072 00000072
- [ 0.000000] vers 0000000b
- [ 0.000000] model 9000/806
- [ 0.000000] Total Memory: 288 MB
- [ 0.000000] initrd: 2057d000-20beebc3
- [ 0.000000] initrd: reserving 1057d000-10beebc3 (mem_max 12000000)
- [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 73152
- [ 0.000000] Kernel command line: panic_timeout=60 panic=-1 mirror/protocol=http preseed/url=http://backup.parisc-linux.org/debian/preseed.cfg mirror/http/proxy__=http://proxy:8080 console=ttyB0 TERM=vt102 palo_kernel=0/vmlinux
- [ 0.000000] PID hash table entries: 2048 (order: 1, 8192 bytes)
- [ 0.000000] Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)
- [ 0.000000] Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)
- [ 0.000000] Sorting __ex_table...
- [ 0.000000] Memory: 279164K/294912K available (3892K kernel code, 695K rwdata, 850K rodata, 256K init, 363K bss, 15748K reserved)
- [ 0.000000] virtual kernel memory layout:
- 0.000000] vmalloc : 0x00810000 - 0x0f000000 ( 231 MB)
- 0.000000] memory : 0x10000000 - 0x22000000 ( 288 MB)
- 0.000000] .init : 0x10100000 - 0x10140000 ( 256 kB)
- 0.000000] .data : 0x1050d000 - 0x1068f9a0 (1546 kB)
- 0.000000] .text : 0x10140000 - 0x1050d000 (3892 kB)
- [ 0.000000] NR_IRQS:96
- [ 0.004000] Console: colour dummy device 160x64
- [ 0.056000] Calibrating delay loop... 46.40 BogoMIPS (lpj=92800)
- [ 0.172000] pid_max: default: 32768 minimum: 301
- [ 0.232000] Security Framework initialized
- [ 0.280000] AppArmor: AppArmor disabled by boot time parameter
- [ 0.348000] Yama: disabled by default; enable with sysctl kernel.yama.*
- [ 0.428000] Mount-cache hash table entries: 1024 (order: 0, 4096 bytes)
- [ 0.508000] Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes)
- [ 0.608000] Initializing cgroup subsys memory
- [ 0.656000] Initializing cgroup subsys devices
- [ 0.712000] Initializing cgroup subsys freezer
- [ 0.764000] Initializing cgroup subsys net_cls
- [ 0.816000] Initializing cgroup subsys blkio
- [ 0.868000] Initializing cgroup subsys perf_event
- [ 0.924000] Initializing cgroup subsys net_prio
- [ 1.016000] devtmpfs: initialized
- [ 1.080000] NET: Registered protocol family 16
- [ 1.148000] EISA bus registered
- [ 1.188000] Searching for devices...
- [ 1.564000] Found devices:
- [ 1.596000] 1. Orville UX Core BA at 0xf0100000 [60] { 11, 0x0, 0x012, 0x00081 }, additional addresses: 0xf010c000
- [ 1.720000] 2. Orville Core LAN (802.3) at 0xf0107000 [60/6] { 10, 0x0, 0x012, 0x0008a }
- [ 1.820000] 3. Gecko BOA BC GSC+ Port at 0xfffb8000 [56] { 7, 0x0, 0x500, 0x0000c }
- [ 1.908000] 4. HP-PB Transit PSI (36960A) at 0xfff64000 [56/36] { 2, 0x0, 0x004, 0x0002f }
- [ 2.008000] 5. Sahp Baat Kiuh SCSI at 0xfff74000 [56/52] { 4, 0x0, 0x044, 0x00039 }
- [ 2.100000] 6. Skunk Centronics (28655A) at 0xfff75000 [56/53] { 5, 0x0, 0x004, 0x0003a }
- [ 2.200000] 7. Sahp Baat Kiuh AP/MUX at 0xfff78000 [56/56] { 5, 0x0, 0x044, 0x0000d }
- [ 2.292000] 8. Gecko BOA BC HP-PB Port at 0xfff7c000 [56/60] { 7, 0x0, 0x103, 0x0000c }
- [ 2.388000] 9. Orville (E23) at 0xfffbe000 [62] { 0, 0x0, 0x480, 0x00004 }
- [ 2.472000] 10. Memory at 0xfffbf000 [63] { 1, 0x0, 0x022, 0x00009 }
- [ 2.548000] Enabling regular chassis codes support v0.05
- [ 2.724000] CPU(s): 1 x PA7100LC (PCX-L) at 48.000000 MHz
- [ 2.800000] Setting cache flush threshold to 1e0 (1 CPUs online)
- [ 2.876000] Lasi version 0 at 0xf0100000 found.
- [ 2.928000] LED display at f010c000 registered
- [ 2.988000] Found GeckoBoa at 0xfffb8000
- [ 3.036000] powersw: Soft power switch support not available.
- [ 3.192000] vgaarb: loaded
- [ 3.244000] Switched to clocksource cr16
- [ 3.480000] NET: Registered protocol family 2
- [ 3.548000] TCP established hash table entries: 4096 (order: 2, 16384 bytes)
- [ 3.632000] TCP bind hash table entries: 4096 (order: 2, 16384 bytes)
- [ 3.708000] TCP: Hash tables configured (established 4096 bind 4096)
- [ 3.788000] TCP: reno registered
- [ 3.824000] UDP hash table entries: 256 (order: 0, 4096 bytes)
- [ 3.896000] UDP-Lite hash table entries: 256 (order: 0, 4096 bytes)
- [ 3.972000] NET: Registered protocol family 1
- [ 4.032000] Unpacking initramfs...
- [ 15.016000] Freeing initrd memory: 6596K (2057d000 - 20bee000)
- [ 15.092000] Enabling PDC chassis warnings support v0.05
- [ 15.164000] futex hash table entries: 256 (order: -1, 3072 bytes)
- [ 15.236000] audit: initializing netlink subsys (disabled)
- [ 15.300000] audit: type=2000 audit(1422739954.296:1): initialized
- [ 15.384000] zbud: loaded
- [ 15.416000] VFS: Disk quotas dquot_6.5.2
- [ 15.464000] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
- [ 15.544000] msgmni has been set to 558
- [ 15.620000] alg: No test for stdrng (krng)
- [ 15.668000] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
- [ 15.760000] io scheduler noop registered
- [ 15.808000] io scheduler deadline registered
- [ 15.860000] io scheduler cfq registered (default)
- [ 15.924000] PDC Stable Storage facility v0.30
- [ 16.020000] STI GSC/PCI core graphics driver Version 0.9b
- [ 16.092000] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
- [ 16.192000] Serial mux driver (16 ports) Revision: 0.6
- [ 16.260000] ttyB0 at MMIO 0xfff78800 (irq = 0, base_baud = 0) is a Mux
- [ 16.340000] ttyB1 at MMIO 0xfff78880 (irq = 0, base_baud = 0) is a Mux
- [ 16.424000] ttyB2 at MMIO 0xfff78900 (irq = 0, base_baud = 0) is a Mux
- [ 16.508000] ttyB3 at MMIO 0xfff78980 (irq = 0, base_baud = 0) is a Mux
- [ 16.588000] ttyB4 at MMIO 0xfff78a00 (irq = 0, base_baud = 0) is a Mux
- [ 16.668000] ttyB5 at MMIO 0xfff78a80 (irq = 0, base_baud = 0) is a Mux
- [ 16.752000] ttyB6 at MMIO 0xfff78b00 (irq = 0, base_baud = 0) is a Mux
- [ 16.836000] ttyB7 at MMIO 0xfff78b80 (irq = 0, base_baud = 0) is a Mux
- [ 16.916000] ttyB8 at MMIO 0xfff78c00 (irq = 0, base_baud = 0) is a Mux
- [ 17.000000] ttyB9 at MMIO 0xfff78c80 (irq = 0, base_baud = 0) is a Mux
- [ 17.080000] ttyB10 at MMIO 0xfff78d00 (irq = 0, base_baud = 0) is a Mux
- [ 17.164000] ttyB11 at MMIO 0xfff78d80 (irq = 0, base_baud = 0) is a Mux
- [ 17.248000] ttyB12 at MMIO 0xfff78e00 (irq = 0, base_baud = 0) is a Mux
- [ 17.328000] ttyB13 at MMIO 0xfff78e80 (irq = 0, base_baud = 0) is a Mux
- [ 17.412000] ttyB14 at MMIO 0xfff78f00 (irq = 0, base_baud = 0) is a Mux
- [ 17.496000] ttyB15 at MMIO 0xfff78f80 (irq = 0, base_baud = 0) is a Mux
- [ 17.580000] console [ttyB0] enabled
- [ 17.580000] console [ttyB0] enabled
- [ 17.664000] bootconsole [ttyB0] disabled
- [ 17.664000] bootconsole [ttyB0] disabled
- [ 17.768000] mousedev: PS/2 mouse device common for all mice
- [ 17.776000] rtc-generic rtc-generic: rtc core: registered rtc-generic as rtc0
- [ 17.836000] ledtrig-cpu: registered to indicate activity on CPUs
- [ 17.924000] TCP: cubic registered
- [ 17.992000] NET: Registered protocol family 10
- [ 18.048000] mip6: Mobile IPv6
- [ 18.084000] NET: Registered protocol family 17
- [ 18.120000] mpls_gso: MPLS GSO support
- [ 18.184000] registered taskstats version 1
- [ 18.224000] rtc-generic rtc-generic: setting system clock to 2015-01-31 21:32:38 UTC (1422739958)
- [ 18.280000] Freeing unused kernel memory: 256K (10100000 - 10140000)
- [ 19.200000] systemd-udevd[38]: starting version 215
- [ 19.288000] random: systemd-udevd urandom read with 55 bits of entropy available
- [ 20.668000] LASI 82596 driver - Revision: 1.30
- [ 20.696000] Found i82596 at 0xf0107000, IRQ 16
- [ 20.884000] eth0: 82596 at 0xf0107000, 08:00:09:3e:c3:50 IRQ 16.
- Starting system log daemon: syslogd, klogd.
Advertisement
Add Comment
Please, Sign In to add comment
Advertisement