API tools faq
paste
Guest User

smartctl - drive

a guest
Oct 10th, 2023
255
0
Never
Add comment
Not a member of Pastebin yet? Sign Up, it unlocks many cool features!
text 10.50 KB | None | 0 0
raw download clone embed print report
  1. === START OF INFORMATION SECTION ===
  2. Model Family: Toshiba 2.5" HDD MQ01ABD...
  3. Device Model: TOSHIBA MQ01ABD100
  4. Serial Number: 46UPTN1IT
  5. LU WWN Device Id: 5 000039 6f1c0bf1d
  6. Firmware Version: AX003J
  7. User Capacity: 1,000,204,886,016 bytes [1.00 TB]
  8. Sector Sizes: 512 bytes logical, 4096 bytes physical
  9. Rotation Rate: 5400 rpm
  10. Form Factor: 2.5 inches
  11. Device is: In smartctl database 7.3/5319
  12. ATA Version is: ATA8-ACS (minor revision not indicated)
  13. SATA Version is: SATA 3.0, 6.0 Gb/s (current: 6.0 Gb/s)
  14. Local Time is: Tue Oct 10 18:57:49 2023 EDT
  15. SMART support is: Available - device has SMART capability.
  16. SMART support is: Enabled
  17.  
  18. === START OF READ SMART DATA SECTION ===
  19. SMART overall-health self-assessment test result: PASSED
  20.  
  21. General SMART Values:
  22. Offline data collection status: (0x00) Offline data collection activity
  23. was never started.
  24. Auto Offline Data Collection: Disabled.
  25. Self-test execution status: ( 0) The previous self-test routine completed
  26. without error or no self-test has ever
  27. been run.
  28. Total time to complete Offline
  29. data collection: ( 120) seconds.
  30. Offline data collection
  31. capabilities: (0x5b) SMART execute Offline immediate.
  32. Auto Offline data collection on/off support.
  33. Suspend Offline collection upon new
  34. command.
  35. Offline surface scan supported.
  36. Self-test supported.
  37. No Conveyance Self-test supported.
  38. Selective Self-test supported.
  39. SMART capabilities: (0x0003) Saves SMART data before entering
  40. power-saving mode.
  41. Supports SMART auto save timer.
  42. Error logging capability: (0x01) Error logging supported.
  43. General Purpose Logging supported.
  44. Short self-test routine
  45. recommended polling time: ( 2) minutes.
  46. Extended self-test routine
  47. recommended polling time: ( 236) minutes.
  48. SCT capabilities: (0x003d) SCT Status supported.
  49. SCT Error Recovery Control supported.
  50. SCT Feature Control supported.
  51. SCT Data Table supported.
  52.  
  53. SMART Attributes Data Structure revision number: 16
  54. Vendor Specific SMART Attributes with Thresholds:
  55. ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE
  56. 1 Raw_Read_Error_Rate 0x000b 100 100 050 Pre-fail Always - 0
  57. 2 Throughput_Performance 0x0005 100 100 050 Pre-fail Offline - 0
  58. 3 Spin_Up_Time 0x0027 100 100 001 Pre-fail Always - 1712
  59. 4 Start_Stop_Count 0x0032 100 100 000 Old_age Always - 1937
  60. 5 Reallocated_Sector_Ct 0x0033 100 100 050 Pre-fail Always - 128
  61. 7 Seek_Error_Rate 0x000b 100 100 050 Pre-fail Always - 0
  62. 8 Seek_Time_Performance 0x0005 100 100 050 Pre-fail Offline - 0
  63. 9 Power_On_Hours 0x0032 099 099 000 Old_age Always - 700
  64. 10 Spin_Retry_Count 0x0033 138 100 030 Pre-fail Always - 0
  65. 12 Power_Cycle_Count 0x0032 100 100 000 Old_age Always - 364
  66. 191 G-Sense_Error_Rate 0x0032 100 100 000 Old_age Always - 30
  67. 192 Power-Off_Retract_Count 0x0032 100 100 000 Old_age Always - 26
  68. 193 Load_Cycle_Count 0x0032 100 100 000 Old_age Always - 3591
  69. 194 Temperature_Celsius 0x0022 100 100 000 Old_age Always - 24 (Min/Max 15/43)
  70. 196 Reallocated_Event_Count 0x0032 100 100 000 Old_age Always - 16
  71. 197 Current_Pending_Sector 0x0032 100 100 000 Old_age Always - 24
  72. 198 Offline_Uncorrectable 0x0030 100 100 000 Old_age Offline - 0
  73. 199 UDMA_CRC_Error_Count 0x0032 200 200 000 Old_age Always - 2
  74. 220 Disk_Shift 0x0002 100 100 000 Old_age Always - 0
  75. 222 Loaded_Hours 0x0032 099 099 000 Old_age Always - 563
  76. 223 Load_Retry_Count 0x0032 100 100 000 Old_age Always - 0
  77. 224 Load_Friction 0x0022 100 100 000 Old_age Always - 0
  78. 226 Load-in_Time 0x0026 100 100 000 Old_age Always - 262
  79. 240 Head_Flying_Hours 0x0001 100 100 001 Pre-fail Offline - 0
  80.  
  81. SMART Error Log Version: 1
  82. ATA Error Count: 3214 (device log contains only the most recent five errors)
  83. CR = Command Register [HEX]
  84. FR = Features Register [HEX]
  85. SC = Sector Count Register [HEX]
  86. SN = Sector Number Register [HEX]
  87. CL = Cylinder Low Register [HEX]
  88. CH = Cylinder High Register [HEX]
  89. DH = Device/Head Register [HEX]
  90. DC = Device Command Register [HEX]
  91. ER = Error register [HEX]
  92. ST = Status register [HEX]
  93. Powered_Up_Time is measured from power on, and printed as
  94. DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes,
  95. SS=sec, and sss=millisec. It "wraps" after 49.710 days.
  96.  
  97. Error 3214 occurred at disk power-on lifetime: 697 hours (29 days + 1 hours)
  98. When the command that caused the error occurred, the device was active or idle.
  99.  
  100. After command completion occurred, registers were:
  101. ER ST SC SN CL CH DH
  102. -- -- -- -- -- -- --
  103. 40 41 90 e0 50 84 40 Error: WP at LBA = 0x008450e0 = 8671456
  104.  
  105. Commands leading to the command that caused the error were:
  106. CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
  107. -- -- -- -- -- -- -- -- ---------------- --------------------
  108. 61 10 98 30 22 04 40 00 04:08:42.274 WRITE FPDMA QUEUED
  109. 60 08 90 e0 50 84 40 00 04:08:40.654 READ FPDMA QUEUED
  110. 60 08 88 80 78 1b 40 00 04:08:40.654 READ FPDMA QUEUED
  111. 60 d0 80 08 49 fd 40 00 04:08:40.654 READ FPDMA QUEUED
  112. 60 20 78 e0 49 fd 40 00 04:08:40.654 READ FPDMA QUEUED
  113.  
  114. Error 3213 occurred at disk power-on lifetime: 697 hours (29 days + 1 hours)
  115. When the command that caused the error occurred, the device was active or idle.
  116.  
  117. After command completion occurred, registers were:
  118. ER ST SC SN CL CH DH
  119. -- -- -- -- -- -- --
  120. 40 41 60 e0 50 84 40 Error: UNC at LBA = 0x008450e0 = 8671456
  121.  
  122. Commands leading to the command that caused the error were:
  123. CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
  124. -- -- -- -- -- -- -- -- ---------------- --------------------
  125. 60 08 60 e0 50 84 40 00 04:08:36.754 READ FPDMA QUEUED
  126. 61 08 58 08 10 04 40 00 04:08:36.754 WRITE FPDMA QUEUED
  127. 60 08 50 a8 89 06 40 00 04:08:36.754 READ FPDMA QUEUED
  128. 60 08 48 b8 47 fd 40 00 04:08:36.754 READ FPDMA QUEUED
  129. ea 00 00 00 00 00 a0 00 04:08:36.738 FLUSH CACHE EXT
  130.  
  131. Error 3212 occurred at disk power-on lifetime: 697 hours (29 days + 1 hours)
  132. When the command that caused the error occurred, the device was active or idle.
  133.  
  134. After command completion occurred, registers were:
  135. ER ST SC SN CL CH DH
  136. -- -- -- -- -- -- --
  137. 40 41 48 e0 50 84 40 Error: WP at LBA = 0x008450e0 = 8671456
  138.  
  139. Commands leading to the command that caused the error were:
  140. CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
  141. -- -- -- -- -- -- -- -- ---------------- --------------------
  142. 61 10 88 18 22 04 40 00 04:08:34.339 WRITE FPDMA QUEUED
  143. 60 08 48 e0 50 84 40 00 04:08:32.916 READ FPDMA QUEUED
  144. ea 00 00 00 00 00 a0 00 04:08:32.857 FLUSH CACHE EXT
  145. 60 08 18 d0 47 fd 40 00 04:08:32.822 READ FPDMA QUEUED
  146. 61 08 10 e0 49 19 40 00 04:08:32.822 WRITE FPDMA QUEUED
  147.  
  148. Error 3211 occurred at disk power-on lifetime: 697 hours (29 days + 1 hours)
  149. When the command that caused the error occurred, the device was active or idle.
  150.  
  151. After command completion occurred, registers were:
  152. ER ST SC SN CL CH DH
  153. -- -- -- -- -- -- --
  154. 40 41 f8 e0 50 84 40 Error: UNC at LBA = 0x008450e0 = 8671456
  155.  
  156. Commands leading to the command that caused the error were:
  157. CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
  158. -- -- -- -- -- -- -- -- ---------------- --------------------
  159. 60 08 f8 e0 50 84 40 00 04:08:28.964 READ FPDMA QUEUED
  160. 60 08 d8 28 13 05 40 00 04:08:28.964 READ FPDMA QUEUED
  161. 61 08 b8 c0 49 19 40 00 04:08:28.964 WRITE FPDMA QUEUED
  162. ea 00 00 00 00 00 a0 00 04:08:28.938 FLUSH CACHE EXT
  163. 61 08 10 10 22 04 40 00 04:08:28.938 WRITE FPDMA QUEUED
  164.  
  165. Error 3210 occurred at disk power-on lifetime: 697 hours (29 days + 1 hours)
  166. When the command that caused the error occurred, the device was active or idle.
  167.  
  168. After command completion occurred, registers were:
  169. ER ST SC SN CL CH DH
  170. -- -- -- -- -- -- --
  171. 40 41 b0 e0 50 84 40 Error: WP at LBA = 0x008450e0 = 8671456
  172.  
  173. Commands leading to the command that caused the error were:
  174. CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
  175. -- -- -- -- -- -- -- -- ---------------- --------------------
  176. 61 10 78 00 22 04 40 00 04:08:27.171 WRITE FPDMA QUEUED
  177. 60 08 b0 e0 50 84 40 00 04:08:25.047 READ FPDMA QUEUED
  178. 61 08 30 00 10 04 40 00 04:08:25.046 WRITE FPDMA QUEUED
  179. 61 10 28 70 c8 05 40 00 04:08:25.046 WRITE FPDMA QUEUED
  180. 60 08 a8 30 4d fd 40 00 04:08:25.046 READ FPDMA QUEUED
  181.  
  182. SMART Self-test log structure revision number 1
  183. Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error
  184. # 1 Short offline Completed without error 00% 694 -
  185.  
  186. SMART Selective self-test log data structure revision number 1
  187. SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
  188. 1 0 0 Not_testing
  189. 2 0 0 Not_testing
  190. 3 0 0 Not_testing
  191. 4 0 0 Not_testing
  192. 5 0 0 Not_testing
  193. Selective self-test flags (0x0):
  194. After scanning selected spans, do NOT read-scan remainder of disk.
  195. If Selective self-test is pending on power-up, resume after 0 minute delay.
Advertisement
Add Comment
Please, Sign In to add comment
Public Pastes
We use cookies for various purposes including analytics. By continuing to use Pastebin, you agree to our use of cookies as described in the Cookies Policy.  OK, I Understand
Not a member of Pastebin yet?
Sign Up, it unlocks many cool features!