Advertisement
Not a member of Pastebin yet?
Sign Up,
it unlocks many cool features!
- 2 sink(s) available.
- index: 0
- name: <alsa_output.usb-C-Media_Electronics_Inc._USB_PnP_Sound_Device-00.analog-stereo-output>
- driver: <module-alsa-card.c>
- flags: HARDWARE HW_MUTE_CTRL HW_VOLUME_CTRL LATENCY DYNAMIC_LATENCY
- state: SUSPENDED
- suspend cause: IDLE
- priority: 9049
- volume: front-left: 39312 / 60%, front-right: 39312 / 60%
- balance 0.00
- base volume: 65536 / 100%
- volume steps: 152
- muted: no
- current latency: 0.00 ms
- max request: 0 KiB
- max rewind: 0 KiB
- monitor source: 0
- sample spec: s16le 2ch 48000Hz
- channel map: front-left,front-right
- Stereo
- used by: 0
- linked by: 0
- configured latency: 0.00 ms; range is 0.50 .. 1837.50 ms
- card: 0 <alsa_card.usb-C-Media_Electronics_Inc._USB_PnP_Sound_Device-00>
- module: 7
- properties:
- alsa.resolution_bits = "16"
- device.api = "alsa"
- device.class = "sound"
- alsa.class = "generic"
- alsa.subclass = "generic-mix"
- alsa.name = "USB Audio"
- alsa.id = "USB Audio"
- alsa.subdevice = "0"
- alsa.subdevice_name = "subdevice #0"
- alsa.device = "0"
- alsa.card = "1"
- alsa.card_name = "USB PnP Sound Device"
- alsa.long_card_name = "C-Media Electronics Inc. USB PnP Sound Device at usb-0000:00:14.0-4.1.1.2, full"
- alsa.driver_name = "snd_usb_audio"
- device.bus_path = "pci-0000:00:14.0-usb-0:4.1.1.2:1.0"
- sysfs.path = "/devices/pci0000:00/0000:00:14.0/usb1/1-4/1-4.1/1-4.1.1/1-4.1.1.2/1-4.1.1.2:1.0/sound/card1"
- udev.id = "usb-C-Media_Electronics_Inc._USB_PnP_Sound_Device-00"
- device.bus = "usb"
- device.vendor.id = "08bb"
- device.vendor.name = "Texas Instruments"
- device.product.id = "2902"
- device.product.name = "PCM2902 Audio Codec"
- device.serial = "C-Media_Electronics_Inc._USB_PnP_Sound_Device"
- device.string = "front:1"
- device.buffering.buffer_size = "352800"
- device.buffering.fragment_size = "176400"
- device.access_mode = "mmap+timer"
- device.profile.name = "analog-stereo-output"
- device.profile.description = "Analog Stereo"
- device.description = "PCM2902 Audio Codec Analog Stereo"
- module-udev-detect.discovered = "1"
- device.icon_name = "audio-card-usb"
- ports:
- analog-output: Analog Output (priority 9900, latency offset 0 usec, available: unknown)
- properties:
- active port: <analog-output>
- * index: 3
- name: <alsa_output.pci-0000_00_1f.3.analog-stereo>
- driver: <module-alsa-card.c>
- flags: HARDWARE HW_MUTE_CTRL HW_VOLUME_CTRL DECIBEL_VOLUME LATENCY DYNAMIC_LATENCY
- state: SUSPENDED
- suspend cause: IDLE
- priority: 9039
- volume: front-left: 32760 / 50% / -18.07 dB, front-right: 32760 / 50% / -18.07 dB
- balance 0.00
- base volume: 65536 / 100% / 0.00 dB
- volume steps: 65537
- muted: no
- current latency: 0.00 ms
- max request: 0 KiB
- max rewind: 0 KiB
- monitor source: 5
- sample spec: s16le 2ch 48000Hz
- channel map: front-left,front-right
- Stereo
- used by: 0
- linked by: 0
- configured latency: 0.00 ms; range is 0.50 .. 1837.50 ms
- card: 1 <alsa_card.pci-0000_00_1f.3>
- module: 8
- properties:
- alsa.resolution_bits = "16"
- device.api = "alsa"
- device.class = "sound"
- alsa.class = "generic"
- alsa.subclass = "generic-mix"
- alsa.name = "ALC897 Analog"
- alsa.id = "ALC897 Analog"
- alsa.subdevice = "0"
- alsa.subdevice_name = "subdevice #0"
- alsa.device = "0"
- alsa.card = "0"
- alsa.card_name = "HDA Intel PCH"
- alsa.long_card_name = "HDA Intel PCH at 0x42d10000 irq 163"
- alsa.driver_name = "snd_hda_intel"
- device.bus_path = "pci-0000:00:1f.3"
- sysfs.path = "/devices/pci0000:00/0000:00:1f.3/sound/card0"
- device.bus = "pci"
- device.vendor.id = "8086"
- device.vendor.name = "Intel Corporation"
- device.product.id = "7a50"
- device.form_factor = "internal"
- device.string = "front:0"
- device.buffering.buffer_size = "352800"
- device.buffering.fragment_size = "176400"
- device.access_mode = "mmap+timer"
- device.profile.name = "analog-stereo"
- device.profile.description = "Analog Stereo"
- device.description = "Built-in Audio Analog Stereo"
- module-udev-detect.discovered = "1"
- device.icon_name = "audio-card-pci"
- ports:
- analog-output-lineout: Line Out (priority 9000, latency offset 0 usec, available: yes)
- properties:
- analog-output-headphones: Headphones (priority 9900, latency offset 0 usec, available: no)
- properties:
- device.icon_name = "audio-headphones"
- active port: <analog-output-lineout>
Advertisement
Add Comment
Please, Sign In to add comment
Advertisement