[2018-07-20 15:58:30] [Output] : ★ Sheldon Canfield crouches down, then positions the lift's arms underneath the side of the 370Z.
[2018-07-20 16:06:13] [Output] : ★ Sheldon Canfield stands up, then walks towards the other side, before crouching down and positioning-
[2018-07-20 16:06:21] [Output] : ★ -the lift's arms under the 370Z.      ((Sheldon Canfield))
[2018-07-20 16:09:40] [Output] : ★ Sheldon Canfield stands up, then reaches for the lift controls.
[2018-07-20 16:10:15] [Output] : ★ Sheldon Canfield flicks the switch upwards, holding it until the lift goes nearly all the way up.
[2018-07-20 16:11:30] [Output] : ★ Sheldon Canfield walks towards the toolbox, then opens the bottom drawer, taking out an impact gun.
[2018-07-20 16:11:43] [Output] : ★ Sheldon Canfield closes the drawer, then opens the top one, taking out a 17mm socket.
[2018-07-20 16:12:10] [Output] : ★ Sheldon Canfield closes the drawer, then attaches the 17mm socket to the impact gun.
[2018-07-20 16:12:34] [Output] : ★ Sheldon Canfield connects the impact gun to the air compressor, then extends the cable as he walks towards-
[2018-07-20 16:12:38] [Output] : ★ -the 370Z.      ((Sheldon Canfield))
[2018-07-20 16:13:40] [Output] : ★ Sheldon Canfield aims the impact gun towards the rear wheel's lug nuts, then starts loosening them one by-
[2018-07-20 16:13:42] [Output] : ★ -one.      ((Sheldon Canfield))
[2018-07-20 16:13:56] [Output] : ★ The lug nuts would fall out after being loosened.      ((Sheldon Canfield))
[2018-07-20 16:14:49] [Output] : ★ Sheldon Canfield places the impact gun on the side of the lift, then grips the wheel with both hands.
[2018-07-20 16:15:01] [Output] : ★ Sheldon Canfield carefully pulls the wheel off the hub, then places it down behind him.
[2018-07-20 16:17:41] [Output] : ★ Sheldon Canfield picks up the impact gun, then walks towards the other side of the 370Z.
[2018-07-20 16:18:27] [Output] : ★ Sheldon Canfield aims the impact gun towards the wheel's lug nuts, then starts loosening them one by one.
[2018-07-20 16:18:37] [Output] : ★ The lug nuts would fall out as they're being loosened.      ((Sheldon Canfield))
[2018-07-20 16:18:50] [Output] : ★ Sheldon Canfield places the impact gun on the side of the lift, then grips the wheel with both hands.
[2018-07-20 16:19:03] [Output] : ★ Sheldon Canfield carefully pulls the wheel off the hub, then places it down behind him.
[2018-07-20 16:19:51] [Output] : ★ Sheldon Canfield walks towards the toolbox, then opens one of the drawers.
[2018-07-20 16:20:30] [Output] : ★ Sheldon Canfield takes out a medium ratchet, a wrench, and a socket.
[2018-07-20 16:20:43] [Output] : ★ Sheldon Canfield closes the drawer, then walks back towards the 370Z, taking the tools with him.
[2018-07-20 16:22:24] [Output] : ★ Sheldon Canfield attaches the socket to the ratchet, setting it to clockwise afterwards.
[2018-07-20 16:22:52] [Output] : ★ Sheldon Canfield reaches upwards, sliding the ratchet over the bolt holding the end of the OEM 'spring-
[2018-07-20 16:23:03] [Output] : ★ -bucket' to the rear subframe.      ((Sheldon Canfield))
[2018-07-20 16:23:16] [Output] : ★ Sheldon Canfield slides the wrench over the nut at the other end of the bolt.
[2018-07-20 16:23:33] [Output] : ★ Sheldon Canfield holds the wrench in place, as he gives the ratchet a few tugs, breaking the bolt loose.
[2018-07-20 16:23:51] [Output] : ★ Sheldon Canfield continues turning the ratchet left to undo the bolt.
[2018-07-20 16:25:59] [Output] : ★ Sheldon Canfield places the wrench and the ratchet on the floor, before unscrewing the bolt by hand.
[2018-07-20 16:26:13] [Output] : ★ Sheldon Canfield places the nut and bolt on the floor, before picking the tools back up.
[2018-07-20 16:26:47] [Output] : ★ Sheldon Canfield slides the ratchet over the bolt holding the other end of the 'spring bucket' to the knuckle
[2018-07-20 16:27:00] [Output] : ★ Sheldon Canfield slides the wrench over the nut at the other end of the bolt, holding it in place.
[2018-07-20 16:27:10] [Output] : ★ Sheldon Canfield gives the ratchet a few tugs, breaking the bolt loose.
[2018-07-20 16:29:54] [Output] : ★ Sheldon Canfield continues turning the ratchet left to undo the bolt.
[2018-07-20 16:30:18] [Output] : ★ Sheldon Canfield places the tools down, then grips the 'spring bucket' with both hands, carefully pulling it-
[2018-07-20 16:30:20] [Output] : ★ -out.      ((Sheldon Canfield))
[2018-07-20 16:30:33] [Output] : ★ Sheldon Canfield brings the 'spring bucket' down, then places it on the floor.
[2018-07-20 16:34:37] [Output] : ★ Sheldon Canfield picks up the wrench, along with the ratchet.
[2018-07-20 16:35:08] [Output] : ★ Sheldon Canfield slides the socket over the bolt holding the end of the camber arm to the subframe.
[2018-07-20 16:35:22] [Output] : ★ Sheldon Canfield slides the wrench over the nut at the other end of the bolt, holding it in place.
[2018-07-20 16:35:33] [Output] : ★ Sheldon Canfield gives the ratchet a few tugs, breaking the bolt loose.
[2018-07-20 16:36:01] [Output] : ★ Sheldon Canfield continues turning the ratchet left, undoing the bolt.
[2018-07-20 16:38:29] [Output] : ★ Sheldon Canfield reaches towards the other end of the camber arm, sliding the ratchet over the bolt holding-
[2018-07-20 16:38:35] [Output] : ★ -it to the knuckle.      ((Sheldon Canfield))
[2018-07-20 16:38:48] [Output] : ★ Sheldon Canfield slides the wrench over the nut at the other end of the bolt, holding it in place.
[2018-07-20 16:40:53] [Output] : ★ Sheldon Canfield gives the ratchet a few tugs, breaking the bolt loose.
[2018-07-20 16:47:16] [Output] : ★ Sheldon Canfield continues turning the ratchet left, undoing the bolt.
[2018-07-20 16:47:37] [Output] : ★ Sheldon Canfield places the tools on the floor, then reaches upwards, before pulling the camber arm out-
[2018-07-20 16:47:43] [Output] : ★ -along with the bolts.      ((Sheldon Canfield))
[2018-07-20 16:47:57] [Output] : ★ Sheldon Canfield places the camber arm on the floor, then picks up the tools.
[2018-07-20 16:48:50] [Output] : ★ Sheldon Canfield slides the ratchet over the bolt holding the end of the traction arm to the subframe.
[2018-07-20 16:49:04] [Output] : ★ Sheldon Canfield slides the wrench over the nut at the other end of the bolt, holding it in place.
[2018-07-20 16:49:14] [Output] : ★ Sheldon Canfield gives the ratchet a few tugs, breaking the bolt loose.
[2018-07-20 16:49:46] [Output] : ★ Sheldon Canfield continues turning the ratchet left, undoing the bolt.
[2018-07-20 16:51:12] [Output] : ★ Sheldon Canfield reaches towards the other end of the traction arm, sliding the ratchet over the bolt-
[2018-07-20 16:51:33] [Output] : ★ -holding it to the knuckle.      ((Sheldon Canfield))
[2018-07-20 16:51:53] [Output] : ★ Sheldon Canfield slides the wrench over the nut, holding it in place.
[2018-07-20 16:52:11] [Output] : ★ Sheldon Canfield gives the ratchet a few tugs, breaking the bolt loose.
[2018-07-20 16:52:31] [Output] : ★ Sheldon Canfield continues loosening the bolt using the ratchet.
[2018-07-20 16:53:24] [Output] : ★ Sheldon Canfield places the tools down, then reaches upwards, before pulling the traction arm out-
[2018-07-20 16:53:33] [Output] : ★ -along with the bolts.      ((Sheldon Canfield))
[2018-07-20 16:54:38] [Output] : ★ Sheldon Canfield places the traction arm on the floor, then moves towards the Parts Shop MAX packages.
[2018-07-20 16:55:39] [Output] : ★ Sheldon Canfield opens each package, then reaches into one of them, pulling out one of the traction arms-
[2018-07-20 16:55:52] [Output] : ★ -along with the provided nuts and bolts.      ((Sheldon Canfield))
[2018-07-20 16:58:02] [Output] : ★ Sheldon Canfield slides the end of the traction arm into the subframe, then lines up the other end with the-
[2018-07-20 16:58:18] [Output] : ★ -knuckle, before hand-screwing the bolts in, followed by the nuts.      ((Sheldon Canfield))
[2018-07-20 16:58:31] [Output] : ★ Sheldon Canfield picks up the wrench and the ratchet.
[2018-07-20 16:58:59] [Output] : ★ Sheldon Canfield slides the ratchet over the bolt holding the traction arm to the subframe.
[2018-07-20 16:59:20] [Output] : ★ Sheldon Canfield sets the ratchet to counter-clockwise as he slides the wrench over the nut, holding it in-
[2018-07-20 16:59:24] [Output] : ★ -place.      ((Sheldon Canfield))
[2018-07-20 17:00:00] [Output] : ★ Sheldon Canfield turns the ratchet right a few times, then gives the wrench a few tugs, fastening the end of-
[2018-07-20 17:00:06] [Output] : ★ -the traction arm to the subframe.      ((Sheldon Canfield))
[2018-07-20 17:02:20] [Output] : ★ Sheldon Canfield reaches towards the other end of the traction arm, then slides the ratchet over the-
[2018-07-20 17:02:37] [Output] : ★ -the bolt, sliding the wrench over the nut as he does so.      ((Sheldon Canfield))
[2018-07-20 17:02:57] [Output] : ★ Sheldon Canfield turns the ratchet right a few times, then gives the wrench a few tugs, fastening the-
[2018-07-20 17:03:08] [Output] : ★ -traction arm to the knuckle.      ((Sheldon Canfield))
[2018-07-20 17:03:40] [Output] : ★ Sheldon Canfield places the tools down, then reaches into one of the other packages, pulling out one of the-
[2018-07-20 17:03:47] [Output] : ★ -camber arms.      ((Sheldon Canfield))
[2018-07-20 17:05:30] [Output] : ★ Sheldon Canfield places the camber arm on the floor, next to the OEM one.
[2018-07-20 17:05:49] [Output] : ★ Sheldon Canfield adjusts the camber arm to the same length as the OEM one, before lifting it up and-
[2018-07-20 17:06:11] [Output] : ★ -sliding it in between the subframe and the knuckle, hand-screwing the bolts in,-      ((Sheldon Canfield))
[2018-07-20 17:06:16] [Output] : ★ -followed by the nuts.      ((Sheldon Canfield))
[2018-07-20 17:07:10] [Output] : ★ Sheldon Canfield picks up the wrench and the ratchet, then reaches towards the new camber arm.
[2018-07-20 17:07:32] [Output] : ★ Sheldon Canfield slides the ratchet onto the bolt located at the knuckle.
[2018-07-20 17:07:42] [Output] : ★ Sheldon Canfield slides the wrench over the nut, holding it in place.
[2018-07-20 17:08:02] [Output] : ★ Sheldon Canfield turns the ratchet right a few times, then gives the wrench a few tugs, fastening the camber-
[2018-07-20 17:08:09] [Output] : ★ -arm to the knuckle.      ((Sheldon Canfield))
[2018-07-20 17:09:17] [Output] : ★ Sheldon Canfield reaches towards the other end of the camber arm, before sliding the ratchet onto the bolt-
[2018-07-20 17:09:24] [Output] : ★ -located at the subframe.      ((Sheldon Canfield))
[2018-07-20 17:09:35] [Output] : ★ Sheldon Canfield slides the wrench onto the nut, holding it in place.
[2018-07-20 17:09:51] [Output] : ★ Sheldon Canfield turns the ratchet right a few times, then gives the wrench a few tugs, fastening the camber-
[2018-07-20 17:09:55] [Output] : ★ -arm to the subframe.      ((Sheldon Canfield))
[2018-07-20 17:11:27] [Output] : ★ Sheldon Canfield places the tools down, then reaches into one of the packages, before pulling out one-
[2018-07-20 17:11:38] [Output] : ★ -of the toe arms, along with the provided hardware.      ((Sheldon Canfield))
[2018-07-20 17:12:01] [Output] : ★ Sheldon Canfield places the toe arm on the floor, next to the OEM spring bucket, then adjusts the toe-
[2018-07-20 17:12:09] [Output] : ★ -arm to the same length as the spring bucket.      ((Sheldon Canfield))
[2018-07-20 17:12:43] [Output] : ★ Sheldon Canfield lifts the toe arm up, then slides it in between the knuckle and the subframe, hand-
[2018-07-20 17:12:53] [Output] : ★ -screwing the bolts in, followed by the nuts.      ((Sheldon Canfield))
[2018-07-20 17:13:47] [Output] : ★ Sheldon Canfield picks up the wrench, along with the ratchet, then reaches upwards.
[2018-07-20 17:14:00] [Output] : ★ Sheldon Canfield slides the ratchet over the bolt located at the knuckle, then slides the wrench onto-
[2018-07-20 17:14:06] [Output] : ★ -the nut, holding it in place.      ((Sheldon Canfield))
[2018-07-20 17:14:31] [Output] : ★ Sheldon Canfield turns the ratchet right a few times, then gives the wrench a few tugs, fastening the toe arm
[2018-07-20 17:14:35] [Output] : ★ -to the knuckle.      ((Sheldon Canfield))
[2018-07-20 17:15:15] [Output] : ★ Sheldon Canfield reaches towards the other end of the toe arm.
[2018-07-20 17:15:30] [Output] : ★ Sheldon Canfield slides the ratchet onto the bolt, then slides the wrench onto the nut, holding it in place.
[2018-07-20 17:15:58] [Output] : ★ Sheldon Canfield turns the ratchet right a few times, then gives the wrench a few tugs, fastening the toe-
[2018-07-20 17:16:03] [Output] : ★ -arm to the subframe.      ((Sheldon Canfield))
[2018-07-20 17:17:29] [Output] : ★ Sheldon Canfield moves towards the other side of the rear subframe, then sets the ratchet to clockwise,-
[2018-07-20 17:18:01] [Output] : ★ -before sliding it onto the bolt holding the OEM spring bucket to the subframe.      ((Sheldon Canfield))
[2018-07-20 17:18:09] [Output] : ★ Sheldon Canfield slides the wrench over the nut, holding it in place.
[2018-07-20 17:18:19] [Output] : ★ Sheldon Canfield gives the ratchet a few tugs, breaking the bolt loose.
[2018-07-20 17:19:05] [Output] : ★ Sheldon Canfield turns the ratchet left a few times, undoing the bolt.
[2018-07-20 17:19:36] [Output] : ★ Sheldon Canfield reaches towards the other end of the spring bucket, prior to sliding the ratchet onto-
[2018-07-20 17:19:48] [Output] : ★ -the bolt holding it to the knuckle.      ((Sheldon Canfield))
[2018-07-20 17:19:55] [Output] : ★ Sheldon Canfield slides the wrench onto the nut, holding it in place.
[2018-07-20 17:20:12] [Output] : ★ Sheldon Canfield gives the ratchet a few tugs, breaking the bolt loose.
[2018-07-20 17:20:44] [Output] : ★ Sheldon Canfield continues turning the ratchet left, undoing the bolt.
[2018-07-20 17:21:03] [Output] : ★ Sheldon Canfield places the tools down, then grips the spring bucket with both hands.
[2018-07-20 17:21:16] [Output] : ★ Sheldon Canfield carefully pulls the spring bucket out, along with the bolts.
[2018-07-20 17:22:04] [Output] : ★ Sheldon Canfield places the spring bucket on the floor, then picks up the wrench and the ratchet, before-
[2018-07-20 17:22:11] [Output] : ★ -reaching towards the subframe.      ((Sheldon Canfield))
[2018-07-20 17:22:31] [Output] : ★ Sheldon Canfield slides the ratchet onto the bolt at the end of the camber arm.
[2018-07-20 17:22:47] [Output] : ★ Sheldon Canfield slides the wrench onto the nut, holding it in place.
[2018-07-20 17:23:21] [Output] : ★ Sheldon Canfield gives the wrench and the ratchet a few tugs in opposite directions, breaking the nut and-
[2018-07-20 17:23:24] [Output] : ★ -bolt loose.      ((Sheldon Canfield))
[2018-07-20 17:25:42] [Output] : ★ Sheldon Canfield continues turning the ratchet left, loosening the bolt.
[2018-07-20 17:27:11] [Output] : ★ Sheldon Canfield reaches towards the knuckle, then slides the wrench over the nut at the other end of-
[2018-07-20 17:27:30] [Output] : ★ -the camber arm, holding it in place as he slides the ratchet onto the bolt.      ((Sheldon Canfield))
[2018-07-20 17:27:39] [Output] : ★ Sheldon Canfield gives the ratchet a few tugs, breaking the bolt loose.
[2018-07-20 17:28:06] [Output] : ★ Sheldon Canfield continues turning the ratchet left, loosening the bolt.
[2018-07-20 17:28:24] [Output] : ★ Sheldon Canfield places the tools down, then pulls the camber arm out along with the bolts.
[2018-07-20 17:29:40] [Output] : ★ Sheldon Canfield places the camber arm down, then picks the tools back up, before reaching towards-
[2018-07-20 17:29:46] [Output] : ★ -the subframe.      ((Sheldon Canfield))
[2018-07-20 17:30:56] [Output] : ★ Sheldon Canfield slides the ratchet onto the bolt at the end of the traction arm, then slides the wrench onto
[2018-07-20 17:31:02] [Output] : ★ -the nut, holding it in place.      ((Sheldon Canfield))
[2018-07-20 17:32:58] [Output] : ★ Sheldon Canfield gives the ratchet a few tugs, breaking the bolt loose.
[2018-07-20 17:33:17] [Output] : ★ Sheldon Canfield turns the ratchet left a few times, loosening the bolt completely.
[2018-07-20 17:35:37] [Output] : ★ Sheldon Canfield reaches towards the knuckle, then slides the ratchet over the bolt at the other end of the-
[2018-07-20 17:35:56] [Output] : ★ -traction arm, before sliding the wrench onto the nut, holding it in place.      ((Sheldon Canfield))
[2018-07-20 17:37:45] [Output] : ★ Sheldon Canfield gives the ratchet a few tugs, breaking the bolt loose.
[2018-07-20 17:39:15] [Output] : ★ Sheldon Canfield turns the ratchet left a few times, loosening the bolt completely.
[2018-07-20 17:39:49] [Output] : ★ Sheldon Canfield places the tools on the floor, then reaches upwards, prior to pulling the traction arm-
[2018-07-20 17:39:54] [Output] : ★ -out, along with the bolts.      ((Sheldon Canfield))
[2018-07-20 17:42:27] [Output] : ★ Sheldon Canfield places the traction arm on the floor, then moves towards the Parts Shop MAX packages.
[2018-07-20 17:43:41] [Output] : ★ Sheldon Canfield reaches into one of the packages, then pulls out the other traction arm, along with the-
[2018-07-20 17:43:47] [Output] : ★ -provided hardware.      ((Sheldon Canfield))
[2018-07-20 18:14:37] [Output] : ★ Sheldon Canfield lifts the traction arm up, then slides it in between the subframe and the knuckle,-
[2018-07-20 18:15:14] [Output] : ★ -holding it in place as he hand-screws the bolts in, followed by the nuts.      ((Sheldon Canfield))
[2018-07-20 18:23:11] [Output] : ★ Sheldon Canfield picks up the wrench and ratchet, then reaches upwards, towards the knuckle.
[2018-07-20 18:23:36] [Output] : ★ Sheldon Canfield slides the ratchet onto the bolt at the end of the traction arm, then slides the wrench-
[2018-07-20 18:23:43] [Output] : ★ -onto the nut, holding it in place.      ((Sheldon Canfield))
[2018-07-20 18:24:09] [Output] : ★ Sheldon Canfield sets the ratchet to counter-clockwise, then turns it right a few times, before giving the-
[2018-07-20 18:24:20] [Output] : ★ -wrench a few tugs, fastening the traction arm to the knuckle.      ((Sheldon Canfield))
[2018-07-20 18:26:31] [Output] : ★ Sheldon Canfield reaches towards the other end of the traction arm, then slides the ratchet onto the bolt.
[2018-07-20 18:26:40] [Output] : ★ Sheldon Canfield slides the wrench onto the nut, holding it in place.
[2018-07-20 18:27:07] [Output] : ★ Sheldon Canfield turns the ratchet right a few times, then gives the wrench a few tugs, fastening the-
[2018-07-20 18:27:15] [Output] : ★ -traction arm to the subframe.      ((Sheldon Canfield))
[2018-07-20 18:38:26] [Output] : ★ Sheldon Canfield places the tools down, then reaches into one of the Packages, taking out the other camber-
[2018-07-20 18:38:36] [Output] : ★ -arm, along with the provided nuts and bolts.      ((Sheldon Canfield))
[2018-07-20 18:39:31] [Output] : ★ Sheldon Canfield places the camber arm on the floor, then adjusts it to the same length as the OEM one.
[2018-07-20 18:39:51] [Output] : ★ Sheldon Canfield lifts the camber arm up, then slides it in between the knuckle and the subframe, holding-
[2018-07-20 18:40:22] [Output] : ★ -it in place as he hand-screws the bolts in, followed by the nuts.      ((Sheldon Canfield))
[2018-07-20 18:41:04] [Output] : ★ Sheldon Canfield picks up the ratchet, then slides it onto the bolt at the end of the camber arm.
[2018-07-20 18:41:13] [Output] : ★ Sheldon Canfield picks up the wrench, then slides it onto the nut, holding it in place.
[2018-07-20 18:41:30] [Output] : ★ Sheldon Canfield turns the ratchet right a few times, then gives the wrench a few tugs, fastening the-
[2018-07-20 18:41:35] [Output] : ★ -camber arm to the knuckle.      ((Sheldon Canfield))
[2018-07-20 18:42:03] [Output] : ★ Sheldon Canfield reaches towards the other end of the camber arm, then slides the ratchet over the bolt.
[2018-07-20 18:42:10] [Output] : ★ Sheldon Canfield slides the wrench over the nut, holding it in place.
[2018-07-20 18:42:30] [Output] : ★ Sheldon Canfield turns the ratchet right a few times, then gives the wrench a few tugs, fastening the camber-
[2018-07-20 18:42:34] [Output] : ★ -arm to the subframe.      ((Sheldon Canfield))
[2018-07-20 18:45:23] [Output] : ★ Sheldon Canfield places the tools on the floor, then reaches into one of the packages.
[2018-07-20 18:45:40] [Output] : ★ Sheldon Canfield pulls out the remaining toe arm, along with the provided nuts and bolts.
[2018-07-20 18:45:57] [Output] : ★ Sheldon Canfield places the toe arm on the floor, then adjusts it to the same length as the OEM-
[2018-07-20 18:46:01] [Output] : ★ -spring bucket.      ((Sheldon Canfield))
[2018-07-20 18:47:46] [Output] : ★ Sheldon Canfield lifts the toe arm up, then slides it in between the knuckle and the subframe, lining the-
[2018-07-20 18:47:50] [Output] : ★ -bolt holes up.      ((Sheldon Canfield))
[2018-07-20 18:48:05] [Output] : ★ Sheldon Canfield holds the toe arm in place as he hand-screws the bolts in, followed by the nuts.
[2018-07-20 18:48:36] [Output] : ★ Sheldon Canfield picks up the wrench, along with the ratchet, then reaches upwards,-
[2018-07-20 18:49:54] [Output] : ★ -towards the knuckle.      ((Sheldon Canfield))
[2018-07-20 18:50:19] [Output] : ★ Sheldon Canfield slides the ratchet onto the bolt at the end of the toe arm, then slides the wrench onto the-
[2018-07-20 18:50:25] [Output] : ★ -nut, holding it in place.      ((Sheldon Canfield))
[2018-07-20 18:51:43] [Output] : ★ Sheldon Canfield turns the ratchet right a few times, then gives the wrench a few tugs, fastening the end-
[2018-07-20 18:51:49] [Output] : ★ -of the toe arm to the knuckle.      ((Sheldon Canfield))
[2018-07-20 18:54:55] [Output] : ★ Sheldon Canfield slides the ratchet onto the bolt at the other end of the toe arm, then slides the wrench-
[2018-07-20 18:55:02] [Output] : ★ -onto the nut, holding it in place.      ((Sheldon Canfield))
[2018-07-20 18:56:38] [Output] : ★ Sheldon Canfield turns the ratchet right a few times, then gives the wrench a few tugs, fastening the end of-
[2018-07-20 18:56:43] [Output] : ★ -the toe arm to the subframe.      ((Sheldon Canfield))
[2018-07-20 18:59:18] [Output] : ★ Sheldon Canfield moves away from the car, then places the tools on the side of the lift.
[2018-07-20 18:59:52] [Output] : ★ Sheldon Canfield lifts the wheel up, then slides it over the lug studs, onto the hub, holding it in place as-
[2018-07-20 19:00:09] [Output] : ★ -he hand-screws the lug nuts onto the studs.      ((Sheldon Canfield))
[2018-07-20 19:00:43] [Output] : ★ Sheldon Canfield picks up the impact gun, then sets it to clockwise as he aims it towards the lug nuts.
[2018-07-20 19:02:29] [Output] : ★ Sheldon Canfield uses the impact gun to tighten each lug nut one by one, in a star formation.
[2018-07-20 19:05:14] [Output] : ★ Sheldon Canfield walks towards the other side of the 370Z, taking the impact gun with him.
[2018-07-20 19:07:14] [Output] : ★ Sheldon Canfield places the impact gun on the side of the lift, then lifts the wheel up, before sliding it-
[2018-07-20 19:07:29] [Output] : ★ -over the lug studs, onto the hub.      ((Sheldon Canfield))
[2018-07-20 19:07:51] [Output] : ★ Sheldon Canfield holds the wheel in place as he hand-screws the lug nuts in, before picking up the impact-
[2018-07-20 19:08:03] [Output] : ★ -gun and aiming it towards the lug nuts.      ((Sheldon Canfield))
[2018-07-20 19:08:18] [Output] : ★ Sheldon Canfield uses the impact gun to tighten each lug nut one by one, in a star formation.
[2018-07-20 19:08:38] [Output] : ★ Sheldon Canfield places the impact gun down, then reaches for the lift controls.
[2018-07-20 19:08:54] [Output] : ★ Sheldon Canfield flicks the switch down, then holds it until the lift brings the car down to the floor.