seabios-bad

SeaBIOS (version rel-1.11.0-11-g4a6dbce-MrChromebox-2018.02.08)
BUILD: gcc: (Ubuntu 5.4.0-6ubuntu1~16.04.6) 5.4.0 20160609 binutils: (GNU Binutils for Ubuntu) 2.26.1
Found coreboot cbmem console @ 7acde000
Found mainboard Google Cave
malloc preinit
Relocating init from 0x000ed200 to 0x7aa03780 (size 30688)
malloc init
Found CBFS header at 0xffbfffdc
Add romfile: payload (size=81944)
Add romfile: pci8086,0406.rom (size=65536)
Add romfile: bootorder (size=32)
Add romfile: links (size=144)
Add romfile: etc/boot-menu-wait (size=8)
Add romfile:  (size=1948952)
Copying data 144@0xffa24178 to 144@0x7aa03170
Add romfile: pci8086,1906.rom (size=65536)
Add romfile: pci8086,1916.rom (size=65536)
Add romfile: pci8086,191e.rom (size=65536)
init ivt
init bda
Copying data 32@0xffa240f8 to 32@0x7aa031e0
boot order:
1: /pci@i0cf8/*@1f,2/drive@0/disk@0
init bios32
init PMM
init PNPBIOS table
init keyboard
init pic
math cp init
PCI probe
Found 19 PCI devices (max PCI bus is 01)
Relocating coreboot bios tables
Copying SMBIOS entry point from 0x7aa4b000 to 0x000f49c0
Copying ACPI RSDP from 0x7ab5c000 to 0x000f4990
CPU Mhz=912
init timer
Scan for VGA option rom
Copying data 65536@0xffa14088 to 65536@0x000c0000
Running option rom at c000:0003
Turning on vga text mode console
SeaBIOS (version rel-1.11.0-11-g4a6dbce-MrChromebox-2018.02.08)
init usb
XHCI init on dev 00:14.0: regs @ 0xd1100000, 18 ports, 64 slots, 32 byte contexts
XHCI    protocol USB  2.00, 12 ports (offset 1), def 3011
XHCI    protocol USB  3.00, 6 ports (offset 13), def 3000
XHCI    extcap 0xc0 @ 0xd1108070
XHCI    extcap 0x1 @ 0xd110846c
XHCI    extcap 0xc6 @ 0xd11084f4
XHCI    extcap 0xc7 @ 0xd1108500
XHCI    extcap 0xc2 @ 0xd1108600
XHCI    extcap 0xa @ 0xd1108700
XHCI    extcap 0xc3 @ 0xd1108740
XHCI    extcap 0xc4 @ 0xd1108800
XHCI    extcap 0xc5 @ 0xd1108900
/7aa01000\ Start thread
|7aa01000| configure_xhci: resetting
init ps2port
/7aa00000\ Start thread
|7aa01000| configure_xhci: setup 34 scratch pad buffers
init ahci
/7a9ff000\ Start thread
|7a9ff000| Searching bootorder for: /pci@i0cf8/*@1e,4
|7a9ff000| sdhci@0xd1137000 ver=1002 cap=546ec881 80000807
/7a9fe000\ Start thread
|7a9fe000| Searching bootorder for: /pci@i0cf8/*@1e,6
|7a9fe000| sdhci@0xd1138000 ver=1002 cap=7568c881 807
|7a9ff000| sdcard_set_frequency 200 400 fa00
|7a9fe000| sdcard_set_frequency 200 400 fa00
|7a9ff000| sdcard_pio command stop (code=1)
|7a9ff000| sdcard_pio command stop (code=1)
|7aa00000| PS2 keyboard initialized
\7aa00000/ End thread
/7aa00000\ Start thread
/7a9fd000\ Start thread
/7a9fc000\ Start thread
/7a9fb000\ Start thread
/7a9fa000\ Start thread
/7a9f9000\ Start thread
/7a9f8000\ Start thread
/7a9f7000\ Start thread
/7a9f6000\ Start thread
/7a9f5000\ Start thread
/7a9f4000\ Start thread
/7a9f3000\ Start thread
/7a9f2000\ Start thread
/7a9f0000\ Start thread
/7a9ef000\ Start thread
/7a9ee000\ Start thread
/7a9ed000\ Start thread
/7a9ec000\ Start thread
|7a9ff000| sdcard_set_frequency 200 25000 400
|7a9ff000| Found sdcard at 0xd1137000: MMC drive DF4064 59640MiB
|7a9ff000| Registering bootable: MMC drive DF4064 59640MiB (type:2 prio:103 data:f4960)
\7a9ff000/ End thread
|7a9f2000| XHCI port #13: 0x00201203, powered, enabled, pls 0, speed 4 [Super]
|7a9f2000| set_address 0x7aa4afb0
|7a9f2000| xhci_alloc_pipe: usbdev 0x7aa02050, ring 0x7aa4a700, slotid 0, epid 1
|7a9f2000| xhci_cmd_enable_slot:
|7a9f2000| xhci_process_events port #1: 0x000206e1, powered, pls 7, speed 1 [Full]
|7a9f2000| xhci_process_events port #3: 0x000206e1, powered, pls 7, speed 1 [Full]
|7a9f2000| xhci_process_events port #7: 0x000206e1, powered, pls 7, speed 1 [Full]
|7a9f2000| xhci_process_events port #13: 0x00201203, powered, enabled, pls 0, speed 4 [Super]
|7a9f2000| xhci_alloc_pipe: enable slot: got slotid 1
|7a9f2000| xhci_cmd_address_device: slotid 1
\7a9fd000/ End thread
\7a9fb000/ End thread
\7a9fa000/ End thread
\7a9f9000/ End thread
\7a9f7000/ End thread
\7a9f6000/ End thread
\7a9f5000/ End thread
\7a9f4000/ End thread
\7a9f3000/ End thread
\7a9f0000/ End thread
\7a9ee000/ End thread
\7a9ef000/ End thread
\7a9ed000/ End thread
\7a9ec000/ End thread
|7a9f2000| xhci_realloc_pipe: usbdev 0x7aa02050, ring 0x7aa4a700, slotid 1, epid 1
|7a9f2000| config_usb: 0x7aa4a820
|7a9f8000| xhci_hub_reset port #7: 0x000006e1, powered, pls 7, speed 1 [Full]
|7a9f2000| device rev=0300 cls=09 sub=00 proto=03 size=512
|7a9f2000| xhci_realloc_pipe: usbdev 0x7aa02050, ring 0x7aa4a700, slotid 1, epid 1
|7a9f8000| XHCI port #7: 0x00200e03, powered, enabled, pls 0, speed 3 [High]
|7a9f8000| set_address 0x7aa4afb0
|7a9f8000| xhci_alloc_pipe: usbdev 0x7aa02350, ring 0x7aa4a500, slotid 0, epid 1
|7a9f8000| xhci_cmd_enable_slot:
|7a9f8000| xhci_process_events port #7: 0x00200e03, powered, enabled, pls 0, speed 3 [High]
|7a9f8000| xhci_alloc_pipe: enable slot: got slotid 2
|7a9f8000| xhci_cmd_address_device: slotid 2
|7a9f8000| xhci_realloc_pipe: usbdev 0x7aa02350, ring 0x7aa4a500, slotid 2, epid 1
|7a9f8000| config_usb: 0x7aa4a620
|7a9fc000| xhci_hub_reset port #3: 0x000006e1, powered, pls 7, speed 1 [Full]
|7a9f8000| device rev=0200 cls=ef sub=02 proto=01 size=64
|7a9f8000| xhci_realloc_pipe: usbdev 0x7aa02350, ring 0x7aa4a500, slotid 2, epid 1
|7a9f8000| usb_hid_setup 0x7aa4a620
\7a9f8000/ End thread
|7a9fc000| XHCI port #3: 0x00200603, powered, enabled, pls 0, speed 1 [Full]
|7a9fc000| set_address 0x7aa4afb0
|7a9fc000| xhci_alloc_pipe: usbdev 0x7aa02550, ring 0x7aa27a00, slotid 0, epid 1
|7a9fc000| xhci_cmd_enable_slot:
|7a9fc000| xhci_process_events port #3: 0x00200603, powered, enabled, pls 0, speed 1 [Full]
|7a9fc000| xhci_alloc_pipe: enable slot: got slotid 3
|7a9fc000| xhci_cmd_address_device: slotid 3
|7a9fc000| xhci_realloc_pipe: usbdev 0x7aa02550, ring 0x7aa27a00, slotid 3, epid 1
|7a9fc000| config_usb: 0x7aa27b20
|7aa00000| xhci_hub_reset port #1: 0x000006e1, powered, pls 7, speed 1 [Full]
|7a9fc000| device rev=0200 cls=e0 sub=01 proto=01 size=64
|7a9fc000| xhci_realloc_pipe: usbdev 0x7aa02550, ring 0x7aa27a00, slotid 3, epid 1
|7a9fc000| xhci_realloc_pipe: reconf ctl endpoint pkt size: 8 -> 64
|7a9fc000| xhci_cmd_evaluate_context: slotid 3, add 0x2, del 0x0
\7a9fc000/ End thread
|7aa00000| XHCI port #1: 0x00200e03, powered, enabled, pls 0, speed 3 [High]
|7aa00000| set_address 0x7aa4afb0
|7aa00000| xhci_alloc_pipe: usbdev 0x7aa02780, ring 0x7aa27800, slotid 0, epid 1
|7aa00000| xhci_cmd_enable_slot:
|7aa00000| xhci_process_events port #1: 0x00200e03, powered, enabled, pls 0, speed 3 [High]
|7aa00000| xhci_alloc_pipe: enable slot: got slotid 4
|7aa00000| xhci_cmd_address_device: slotid 4
|7aa00000| xhci_realloc_pipe: usbdev 0x7aa02780, ring 0x7aa27800, slotid 4, epid 1
|7aa00000| config_usb: 0x7aa27920
|7aa00000| device rev=0210 cls=09 sub=00 proto=01 size=64
|7aa00000| xhci_realloc_pipe: usbdev 0x7aa02780, ring 0x7aa27800, slotid 4, epid 1
/7a9fd000\ Start thread
/7a9fc000\ Start thread
/7a9fb000\ Start thread
/7a9fa000\ Start thread
|7a9fd000| set_address 0x7aa4afb0
|7a9fd000| xhci_alloc_pipe: usbdev 0x7aa02410, ring 0x7aa26e00, slotid 0, epid 1
|7a9fd000| xhci_cmd_configure_endpoint: slotid 1, add 0x1, del 0x0
|7a9fd000| xhci_cmd_enable_slot:
|7a9fd000| xhci_alloc_pipe: enable slot: got slotid 5
|7a9fd000| xhci_cmd_address_device: slotid 5
|7a9fd000| xhci_realloc_pipe: usbdev 0x7aa02410, ring 0x7aa26e00, slotid 5, epid 1
|7a9fd000| config_usb: 0x7aa26f20
|7a9fd000| device rev=0300 cls=00 sub=00 proto=00 size=512
|7a9fd000| xhci_realloc_pipe: usbdev 0x7aa02410, ring 0x7aa26e00, slotid 5, epid 1
|7a9fc000| set_address 0x7aa4afb0
|7a9fd000| xhci_send_pipe: xfer failed (cc 6)
|7a9fd000| Failure on hub port 0 disconnect
\7a9fd000/ End thread
|7a9fc000| xhci_alloc_pipe: usbdev 0x7aa02390, ring 0x7aa26c00, slotid 0, epid 1
|7a9fc000| xhci_cmd_configure_endpoint: slotid 1, add 0x1, del 0x0
|7a9fc000| xhci_cmd_enable_slot:
|7a9fc000| xhci_alloc_pipe: enable slot: got slotid 6
|7a9fc000| xhci_cmd_address_device: slotid 6
|7a9fc000| xhci_realloc_pipe: usbdev 0x7aa02390, ring 0x7aa26c00, slotid 6, epid 1
|7a9fc000| config_usb: 0x7aa26d20
|7a9fc000| device rev=0300 cls=00 sub=00 proto=00 size=512
|7a9fc000| xhci_realloc_pipe: usbdev 0x7aa02390, ring 0x7aa26c00, slotid 6, epid 1
|7a9fc000| xhci_alloc_pipe: usbdev 0x7aa02390, ring 0x000ef600, slotid 0, epid 5
|7a9fc000| xhci_cmd_configure_endpoint: slotid 6, add 0x21, del 0x0
|7a9fc000| xhci_alloc_pipe: usbdev 0x7aa02390, ring 0x000ef400, slotid 0, epid 2
|7a9fc000| xhci_cmd_configure_endpoint: slotid 6, add 0x5, del 0x0
|7a9fc000| Searching bootorder for: /pci@i0cf8/usb@14/hub@1/storage@2/*@0/*@0,0
|7a9fc000| Searching bootorder for: /pci@i0cf8/usb@14/hub@1/usb-*@2
|7a9fc000| USB MSC vendor='Generic-' product='SD/MMC' rev='1.00' type=0 removable=1
|7a9fc000| Device reports MEDIUM NOT PRESENT
|7a9fc000| scsi_is_ready returned -1
|7a9fc000| Unable to configure USB MSC drive.
|7a9fc000| Searching bootorder for: /pci@i0cf8/usb@14/hub@1/storage@2/*@0/*@0,1
|7a9fc000| Searching bootorder for: /pci@i0cf8/usb@14/hub@1/usb-*@2
|7a9fc000| USB MSC vendor='Generic-' product='Micro SD/M2' rev='1.08' type=0 removable=1
/7a9fd000\ Start thread
/7a9f9000\ Start thread
/7a9f8000\ Start thread
/7a9f7000\ Start thread
|7a9f7000| set_address 0x7aa4afb0
|7a9f7000| xhci_alloc_pipe: usbdev 0x7a9ffed0, ring 0x7aa26200, slotid 0, epid 1
|7a9f7000| xhci_cmd_configure_endpoint: slotid 4, add 0x1, del 0x0
|7a9f7000| xhci_cmd_enable_slot:
|7a9f7000| xhci_alloc_pipe: enable slot: got slotid 7
|7a9f7000| xhci_cmd_address_device: slotid 7
|7a9f7000| xhci_realloc_pipe: usbdev 0x7a9ffed0, ring 0x7aa26200, slotid 7, epid 1
|7a9f7000| config_usb: 0x7aa26320
|7a9f7000| device rev=0200 cls=09 sub=00 proto=01 size=64
|7a9f7000| xhci_realloc_pipe: usbdev 0x7a9ffed0, ring 0x7aa26200, slotid 7, epid 1
\7a9f8000/ End thread
\7a9f9000/ End thread
\7a9fd000/ End thread
/7a9fd000\ Start thread
/7a9f9000\ Start thread
/7a9f8000\ Start thread
/7a9f6000\ Start thread
|7a9f9000| set_address 0x7aa4afb0
|7a9f9000| xhci_alloc_pipe: usbdev 0x7aa02000, ring 0x7aa26000, slotid 0, epid 1
|7a9f9000| xhci_cmd_configure_endpoint: slotid 7, add 0x1, del 0x0
|7a9f9000| xhci_cmd_enable_slot:
|7a9f9000| xhci_alloc_pipe: enable slot: got slotid 8
|7a9f9000| xhci_cmd_address_device: slotid 8
|7a9f9000| xhci_realloc_pipe: usbdev 0x7aa02000, ring 0x7aa26000, slotid 8, epid 1
|7a9f9000| config_usb: 0x7aa26120
|7a9f9000| device rev=0201 cls=11 sub=00 proto=00 size=64
|7a9f9000| xhci_realloc_pipe: usbdev 0x7aa02000, ring 0x7aa26000, slotid 8, epid 1
\7a9f9000/ End thread
\7a9fd000/ End thread
\7a9f8000/ End thread
\7a9f6000/ End thread
|7a9f7000| Initialized USB HUB (0 ports used)
\7a9f7000/ End thread
|7aa00000| Initialized USB HUB (0 ports used)
\7aa00000/ End thread
|7a9fc000| USB MSC blksize=512 sectors=124735488
|7a9fc000| Registering bootable: USB MSC Drive Generic- Micro SD/M2 1.08 (type:2 prio:103 data:f4900)
\7a9fc000/ End thread
|7a9fe000| WARNING - Timeout at sdcard_card_setup:432!
\7a9fe000/ End thread
|7a9fa000| WARNING - Timeout at xhci_event_wait:740!
|7a9fa000| xhci_send_pipe: xfer failed (cc -1)
|7a9fa000| Failure on hub port 3 detect
\7a9fa000/ End thread
|7a9fb000| WARNING - Timeout at xhci_event_wait:740!
|7a9fb000| xhci_send_pipe: xfer failed (cc -1)
|7a9fb000| Failure on hub port 2 detect
\7a9fb000/ End thread
|7a9f2000| Initialized USB HUB (1 ports used)
\7a9f2000/ End thread
\7aa01000/ End thread
All threads complete.
Scan for option roms

Press ESC for boot menu.

Copying data 8@0xffa24278 to 8@0x00006f1c
Select boot device:

1. USB MSC Drive Generic- Micro SD/M2 1.08
2. MMC drive DF4064 59640MiB

Searching bootorder for: HALT
Mapping hd drive 0x000f4900 to 0
drive 0x000f4900: PCHS=0/0/0 translation=lba LCHS=1024/255/63 s=124735488
Mapping hd drive 0x000f4960 to 1
drive 0x000f4960: PCHS=0/0/0 translation=lba LCHS=1024/255/63 s=122142720
finalize PMM
malloc finalize
Space available for UMB: d0000-ef000, f0000-f4900
Returned 106496 bytes of ZoneHigh
e820 map has 8 items:
  0: 0000000000000000 - 000000000009fc00 = 1 RAM
  1: 000000000009fc00 - 00000000000a0000 = 2 RESERVED
  2: 00000000000f0000 - 0000000000100000 = 2 RESERVED
  3: 0000000000100000 - 000000007aa25000 = 1 RAM
  4: 000000007aa25000 - 0000000080000000 = 2 RESERVED
  5: 00000000e0000000 - 00000000f0000000 = 2 RESERVED
  6: 00000000fd000000 - 0000000100000000 = 2 RESERVED
  7: 0000000100000000 - 000000017f000000 = 1 RAM
Jump to int19
enter handle_19:
  NULL
Booting from Hard Disk...
Booting from 0000:7c00