API tools faq
paste
Advertisement
Guest User

Untitled

a guest
Dec 15th, 2019
137
0
Never
Add comment
Not a member of Pastebin yet? Sign Up, it unlocks many cool features!
text 14.59 KB | None | 0 0
raw download clone embed print report
  1. [ 0.000000] Linux version 4.14.156 (builder@buildhost) (gcc version 7.5.0 (OpenWrt GCC 7.5.0 r10775-db8345d8e4)) #0 Sat Nov 30 15:52:33 2019
  2. [ 0.000000] MyLoader: sysp=8520fd77, boardp=a649308a, parts=182a8a29
  3. [ 0.000000] bootconsole [early0] enabled
  4. [ 0.000000] CPU0 revision is: 00019750 (MIPS 74Kc)
  5. [ 0.000000] SoC: Qualcomm Atheros QCA956X ver 1 rev 0
  6. [ 0.000000] Determined physical RAM map:
  7. [ 0.000000] memory: 08000000 @ 00000000 (usable)
  8. [ 0.000000] Initrd not found or empty - disabling initrd
  9. [ 0.000000] Primary instruction cache 64kB, VIPT, 4-way, linesize 32 bytes.
  10. [ 0.000000] Primary data cache 32kB, 4-way, VIPT, cache aliases, linesize 32 bytes
  11. [ 0.000000] Zone ranges:
  12. [ 0.000000] Normal [mem 0x0000000000000000-0x0000000007ffffff]
  13. [ 0.000000] Movable zone start for each node
  14. [ 0.000000] Early memory node ranges
  15. [ 0.000000] node 0: [mem 0x0000000000000000-0x0000000007ffffff]
  16. [ 0.000000] Initmem setup node 0 [mem 0x0000000000000000-0x0000000007ffffff]
  17. [ 0.000000] On node 0 totalpages: 32768
  18. [ 0.000000] free_area_init_node: node 0, pgdat 804ead30, node_mem_map 81000020
  19. [ 0.000000] Normal zone: 256 pages used for memmap
  20. [ 0.000000] Normal zone: 0 pages reserved
  21. [ 0.000000] Normal zone: 32768 pages, LIFO batch:7
  22. [ 0.000000] random: get_random_bytes called from 0x804ee740 with crng_init=0
  23. [ 0.000000] pcpu-alloc: s0 r0 d32768 u32768 alloc=1*32768
  24. [ 0.000000] pcpu-alloc: [0] 0
  25. [ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 32512
  26. [ 0.000000] Kernel command line: board=ARCHER-C7-V5 mtdparts=spi0.0:128k(factory-uboot)ro,128k(u-boot)ro,64k@0x50000(art)ro,128k@0x60000(info)ro,15360k@0xc0000(firmware) console=ttyS0,115200 rootfstype=squashfs noinitrd
  27. [ 0.000000] PID hash table entries: 512 (order: -1, 2048 bytes)
  28. [ 0.000000] Dentry cache hash table entries: 16384 (order: 4, 65536 bytes)
  29. [ 0.000000] Inode-cache hash table entries: 8192 (order: 3, 32768 bytes)
  30. [ 0.000000] Writing ErrCtl register=00000000
  31. [ 0.000000] Readback ErrCtl register=00000000
  32. [ 0.000000] Memory: 124296K/131072K available (3944K kernel code, 195K rwdata, 516K rodata, 328K init, 211K bss, 6776K reserved, 0K cma-reserved)
  33. [ 0.000000] SLUB: HWalign=32, Order=0-3, MinObjects=0, CPUs=1, Nodes=1
  34. [ 0.000000] NR_IRQS: 51
  35. [ 0.000000] Clocks: CPU:775.000MHz, DDR:650.000MHz, AHB:258.333MHz, Ref:25.000MHz
  36. [ 0.000000] clocksource: MIPS: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 4932285024 ns
  37. [ 0.000007] sched_clock: 32 bits at 387MHz, resolution 2ns, wraps every 5541893118ns
  38. [ 0.008219] Calibrating delay loop... 385.84 BogoMIPS (lpj=1929216)
  39. [ 0.074796] pid_max: default: 32768 minimum: 301
  40. [ 0.079839] Mount-cache hash table entries: 1024 (order: 0, 4096 bytes)
  41. [ 0.086831] Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes)
  42. [ 0.096137] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns
  43. [ 0.106544] futex hash table entries: 256 (order: -1, 3072 bytes)
  44. [ 0.114003] NET: Registered protocol family 16
  45. [ 0.119922] MIPS: machine is TP-LINK Archer C7 v5
  46. [ 0.127616] registering PCI controller with io_map_base unset
  47. [ 0.383990] PCI host bridge to bus 0000:00
  48. [ 0.388315] pci_bus 0000:00: root bus resource [mem 0x12000000-0x13ffffff]
  49. [ 0.395582] pci_bus 0000:00: root bus resource [io 0x0001]
  50. [ 0.401452] pci_bus 0000:00: root bus resource [??? 0x00000000 flags 0x0]
  51. [ 0.408612] pci_bus 0000:00: No busn resource found for root bus, will use [bus 00-ff]
  52. [ 0.416986] pci 0000:00:00.0: [168c:003c] type 00 class 0x028000
  53. [ 0.417039] pci 0000:00:00.0: reg 0x10: [mem 0x00000000-0x001fffff 64bit]
  54. [ 0.417091] pci 0000:00:00.0: reg 0x30: [mem 0x00000000-0x0000ffff pref]
  55. [ 0.417161] pci 0000:00:00.0: supports D1 D2
  56. [ 0.417341] pci_bus 0000:00: busn_res: [bus 00-ff] end is updated to 00
  57. [ 0.417365] pci 0000:00:00.0: BAR 0: assigned [mem 0x12000000-0x121fffff 64bit]
  58. [ 0.425116] pci 0000:00:00.0: BAR 6: assigned [mem 0x12200000-0x1220ffff pref]
  59. [ 0.435680] clocksource: Switched to clocksource MIPS
  60. [ 0.441913] NET: Registered protocol family 2
  61. [ 0.447299] TCP established hash table entries: 1024 (order: 0, 4096 bytes)
  62. [ 0.454648] TCP bind hash table entries: 1024 (order: 0, 4096 bytes)
  63. [ 0.461398] TCP: Hash tables configured (established 1024 bind 1024)
  64. [ 0.468228] UDP hash table entries: 256 (order: 0, 4096 bytes)
  65. [ 0.474398] UDP-Lite hash table entries: 256 (order: 0, 4096 bytes)
  66. [ 0.481258] NET: Registered protocol family 1
  67. [ 0.485920] PCI: CLS 0 bytes, default 32
  68. [ 0.488426] Crashlog allocated RAM at address 0x3f00000
  69. [ 0.495053] workingset: timestamp_bits=30 max_order=15 bucket_order=0
  70. [ 0.506194] squashfs: version 4.0 (2009/01/31) Phillip Lougher
  71. [ 0.512337] jffs2: version 2.2 (NAND) (SUMMARY) (LZMA) (RTIME) (CMODE_PRIORITY) (c) 2001-2006 Red Hat, Inc.
  72. [ 0.530888] io scheduler noop registered
  73. [ 0.535018] io scheduler deadline registered (default)
  74. [ 0.540854] Serial: 8250/16550 driver, 16 ports, IRQ sharing enabled
  75. [ 0.549355] console [ttyS0] disabled
  76. [ 0.573210] serial8250.0: ttyS0 at MMIO 0x18020000 (irq = 11, base_baud = 1562500) is a 16550A
  77. [ 0.582319] console [ttyS0] enabled
  78. [ 0.589873] bootconsole [early0] disabled
  79. [ 0.604388] m25p80 spi0.0: found w25q128, expected m25p80
  80. [ 0.619680] m25p80 spi0.0: w25q128 (16384 Kbytes)
  81. [ 0.624570] 5 cmdlinepart partitions found on MTD device spi0.0
  82. [ 0.630703] Creating 5 MTD partitions on "spi0.0":
  83. [ 0.635657] 0x000000000000-0x000000020000 : "factory-uboot"
  84. [ 0.642925] 0x000000020000-0x000000040000 : "u-boot"
  85. [ 0.649268] 0x000000050000-0x000000060000 : "art"
  86. [ 0.655889] 0x000000060000-0x000000080000 : "info"
  87. [ 0.661985] 0x0000000c0000-0x000000fc0000 : "firmware"
  88. [ 0.693107] 2 uimage-fw partitions found on MTD device firmware
  89. [ 0.699264] 0x0000000c0000-0x000000250000 : "kernel"
  90. [ 0.705001] 0x000000250000-0x000000fc0000 : "rootfs"
  91. [ 0.710748] mtd: device 6 (rootfs) set to be root filesystem
  92. [ 0.716677] 1 squashfs-split partitions found on MTD device rootfs
  93. [ 0.723064] 0x000000510000-0x000000fc0000 : "rootfs_data"
  94. [ 0.731857] libphy: Fixed MDIO Bus: probed
  95. [ 0.753537] switch0: Atheros AR8337 rev. 2 switch registered on ag71xx-mdio.0
  96. [ 1.475812] libphy: ag71xx_mdio: probed
  97. [ 2.107315] ag71xx ag71xx.0: connected to PHY at ag71xx-mdio.0:00 [uid=004dd036, driver=Atheros AR8216/AR8236/AR8316]
  98. [ 2.118790] eth0: Atheros AG71xx at 0xb9000000, irq 4, mode: sgmii
  99. [ 2.127448] NET: Registered protocol family 10
  100. [ 2.136983] Segment Routing with IPv6
  101. [ 2.140854] NET: Registered protocol family 17
  102. [ 2.145480] bridge: filtering via arp/ip/ip6tables is no longer available by default. Update your scripts to load br_netfilter if you need this.
  103. [ 2.159375] 8021q: 802.1Q VLAN Support v1.8
  104. [ 2.165117] hctosys: unable to open rtc device (rtc0)
  105. [ 2.175620] VFS: Mounted root (squashfs filesystem) readonly on device 31:6.
  106. [ 2.184744] Freeing unused kernel memory: 328K
  107. [ 2.189371] This architecture does not have kernel memory protection.
  108. [ 2.585692] random: fast init done
  109. [ 2.776249] init: Console is alive
  110. [ 2.779972] init: - watchdog -
  111. [ 3.791249] kmodloader: loading kernel modules from /etc/modules-boot.d/*
  112. [ 3.846598] usbcore: registered new interface driver usbfs
  113. [ 3.852355] usbcore: registered new interface driver hub
  114. [ 3.857972] usbcore: registered new device driver usb
  115. [ 3.867867] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
  116. [ 3.876067] ehci-platform: EHCI generic platform driver
  117. [ 3.881540] ehci-platform ehci-platform.0: EHCI Host Controller
  118. [ 3.887736] ehci-platform ehci-platform.0: new USB bus registered, assigned bus number 1
  119. [ 3.898189] ehci-platform ehci-platform.0: irq 48, io mem 0x1b000000
  120. [ 3.925717] ehci-platform ehci-platform.0: USB 2.0 started, EHCI 1.00
  121. [ 3.933017] hub 1-0:1.0: USB hub found
  122. [ 3.937271] hub 1-0:1.0: 1 port detected
  123. [ 3.941738] ehci-platform ehci-platform.1: EHCI Host Controller
  124. [ 3.947935] ehci-platform ehci-platform.1: new USB bus registered, assigned bus number 2
  125. [ 3.958409] ehci-platform ehci-platform.1: irq 49, io mem 0x1b400000
  126. [ 3.985723] ehci-platform ehci-platform.1: USB 2.0 started, EHCI 1.00
  127. [ 3.993026] hub 2-0:1.0: USB hub found
  128. [ 3.997279] hub 2-0:1.0: 1 port detected
  129. [ 4.002315] kmodloader: done loading kernel modules from /etc/modules-boot.d/*
  130. [ 4.020203] init: - preinit -
  131. [ 5.099136] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
  132. [ 5.125199] random: procd: uninitialized urandom read (4 bytes read)
  133. [ 6.117344] eth0: link up (1000Mbps/Full duplex)
  134. [ 6.122372] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
  135. [ 7.435096] jffs2: notice: (470) jffs2_build_xattr_subsystem: complete building xattr subsystem, 6 of xdatum (3 unchecked, 3 orphan) and 32 of xref (3 dead, 0 orphan) found.
  136. [ 7.455150] mount_root: switching to jffs2 overlay
  137. [ 7.481796] overlayfs: upper fs does not support tmpfile.
  138. [ 7.493705] urandom-seed: Seeding with /etc/urandom.seed
  139. [ 7.608624] eth0: link down
  140. [ 7.621921] procd: - early -
  141. [ 7.624994] procd: - watchdog -
  142. [ 8.243703] procd: - watchdog -
  143. [ 8.247313] procd: - ubus -
  144. [ 8.352477] random: ubusd: uninitialized urandom read (4 bytes read)
  145. [ 8.382611] random: ubusd: uninitialized urandom read (4 bytes read)
  146. [ 8.389624] random: ubusd: uninitialized urandom read (4 bytes read)
  147. [ 8.397055] procd: - init -
  148. [ 9.258862] urngd: v1.0.0 started.
  149. [ 9.513737] random: crng init done
  150. [ 9.517295] random: 6 urandom warning(s) missed due to ratelimiting
  151. [ 9.909221] kmodloader: loading kernel modules from /etc/modules.d/*
  152. [ 9.942147] ip6_tables: (C) 2000-2006 Netfilter Core Team
  153. [ 9.957010] Loading modules backported from Linux version v4.19.85-0-gc63ee2939dc1
  154. [ 9.964835] Backport generated by backports.git v4.19.85-1-0-g8a8be258
  155. [ 9.974103] ip_tables: (C) 2000-2006 Netfilter Core Team
  156. [ 9.987001] nf_conntrack version 0.5.0 (2048 buckets, 8192 max)
  157. [ 10.042355] xt_time: kernel timezone is -0000
  158. [ 10.510043] PPP generic driver version 2.4.2
  159. [ 10.516711] NET: Registered protocol family 24
  160. [ 10.741800] pci 0000:00:00.0: using irq 40 for pin 1
  161. [ 10.748319] PCI: Enabling device 0000:00:00.0 (0000 -> 0002)
  162. [ 10.754315] ath10k_pci 0000:00:00.0: pci irq legacy oper_irq_mode 1 irq_mode 0 reset_mode 0
  163. [ 11.030876] ath10k_pci 0000:00:00.0: Direct firmware load for ath10k/pre-cal-pci-0000:00:00.0.bin failed with error -2
  164. [ 11.041976] ath10k_pci 0000:00:00.0: Falling back to user helper
  165. [ 11.201987] firmware ath10k!pre-cal-pci-0000:00:00.0.bin: firmware_loading_store: map pages failed
  166. [ 11.214190] ath10k_pci 0000:00:00.0: Direct firmware load for ath10k/QCA988X/hw2.0/firmware-6.bin failed with error -2
  167. [ 11.225287] ath10k_pci 0000:00:00.0: Falling back to user helper
  168. [ 11.364171] firmware ath10k!QCA988X!hw2.0!firmware-6.bin: firmware_loading_store: map pages failed
  169. [ 11.661175] ath10k_pci 0000:00:00.0: qca988x hw2.0 target 0x4100016c chip_id 0x043202ff sub 0000:0000
  170. [ 11.670753] ath10k_pci 0000:00:00.0: kconfig debug 0 debugfs 1 tracing 0 dfs 1 testmode 1
  171. [ 11.683770] ath10k_pci 0000:00:00.0: firmware ver 10.2.4-1.0-00047 api 5 features no-p2p,raw-mode,mfp,allows-mesh-bcast crc32 35bd9258
  172. [ 11.729540] ath10k_pci 0000:00:00.0: Direct firmware load for ath10k/QCA988X/hw2.0/board-2.bin failed with error -2
  173. [ 11.740348] ath10k_pci 0000:00:00.0: Falling back to user helper
  174. [ 11.813893] firmware ath10k!QCA988X!hw2.0!board-2.bin: firmware_loading_store: map pages failed
  175. [ 11.824574] ath10k_pci 0000:00:00.0: board_file api 1 bmi_id N/A crc32 bebc7c08
  176. [ 12.931568] ath10k_pci 0000:00:00.0: htt-ver 2.1 wmi-op 5 htt-op 2 cal file max-sta 128 raw 0 hwcrypto 1
  177. [ 13.067138] ath: EEPROM regdomain: 0x0
  178. [ 13.067146] ath: EEPROM indicates default country code should be used
  179. [ 13.067149] ath: doing EEPROM country->regdmn map search
  180. [ 13.067161] ath: country maps to regdmn code: 0x3a
  181. [ 13.067165] ath: Country alpha2 being used: US
  182. [ 13.067168] ath: Regpair used: 0x3a
  183. [ 13.513647] usbcore: registered new interface driver ath9k_htc
  184. [ 13.720087] ath: EEPROM regdomain: 0x0
  185. [ 13.720095] ath: EEPROM indicates default country code should be used
  186. [ 13.720098] ath: doing EEPROM country->regdmn map search
  187. [ 13.720110] ath: country maps to regdmn code: 0x3a
  188. [ 13.720115] ath: Country alpha2 being used: US
  189. [ 13.720117] ath: Regpair used: 0x3a
  190. [ 13.732405] ieee80211 phy1: Selected rate control algorithm 'minstrel_ht'
  191. [ 13.734134] ieee80211 phy1: Atheros AR9561 Rev:0 mem=0xb8100000, irq=47
  192. [ 13.777570] kmodloader: done loading kernel modules from /etc/modules.d/*
  193. [ 24.088421] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
  194. [ 24.096323] eth0: link up (1000Mbps/Full duplex)
  195. [ 24.115881] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
  196. [ 24.136176] br-lan: port 1(eth0.1) entered blocking state
  197. [ 24.141763] br-lan: port 1(eth0.1) entered disabled state
  198. [ 24.147763] device eth0.1 entered promiscuous mode
  199. [ 24.152717] device eth0 entered promiscuous mode
  200. [ 24.227784] br-lan: port 1(eth0.1) entered blocking state
  201. [ 24.233372] br-lan: port 1(eth0.1) entered forwarding state
  202. [ 24.239326] IPv6: ADDRCONF(NETDEV_UP): br-lan: link is not ready
  203. [ 25.155996] IPv6: ADDRCONF(NETDEV_CHANGE): br-lan: link becomes ready
  204. [ 27.990527] IPv6: ADDRCONF(NETDEV_UP): wlan1: link is not ready
  205. [ 28.118616] br-lan: port 2(wlan1) entered blocking state
  206. [ 28.124503] br-lan: port 2(wlan1) entered disabled state
  207. [ 28.130317] device wlan1 entered promiscuous mode
  208. [ 28.135261] br-lan: port 2(wlan1) entered blocking state
  209. [ 28.140801] br-lan: port 2(wlan1) entered forwarding state
  210. [ 28.164154] br-lan: port 2(wlan1) entered disabled state
  211. [ 28.189967] IPv6: ADDRCONF(NETDEV_CHANGE): wlan1: link becomes ready
  212. [ 28.196756] br-lan: port 2(wlan1) entered blocking state
  213. [ 28.202249] br-lan: port 2(wlan1) entered forwarding state
  214. [ 29.880511] ath10k_pci 0000:00:00.0: pdev param 0 not supported by firmware
  215. [ 29.902142] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
  216. [ 29.943464] br-lan: port 3(wlan0) entered blocking state
  217. [ 29.949953] br-lan: port 3(wlan0) entered disabled state
  218. [ 29.955771] device wlan0 entered promiscuous mode
  219. [ 30.296986] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
  220. [ 30.303778] br-lan: port 3(wlan0) entered blocking state
  221. [ 30.309326] br-lan: port 3(wlan0) entered forwarding state
Advertisement
Add Comment
Please, Sign In to add comment
Advertisement
Public Pastes
Advertisement
We use cookies for various purposes including analytics. By continuing to use Pastebin, you agree to our use of cookies as described in the Cookies Policy.  OK, I Understand
Not a member of Pastebin yet?
Sign Up, it unlocks many cool features!