API tools faq
paste
simhavcs

dmesg_nx7_july12_4.7-rc3

simhavcs
Jul 12th, 2016
66
0
Never
Add comment
Not a member of Pastebin yet? Sign Up, it unlocks many cool features!
text 37.42 KB | None | 0 0
raw download clone embed print report
  1. Android Bootloader - UART_DM Initialized!!!
  2. [0] welcome to lk
  3.  
  4. [10] platform_init()
  5. [10] PcbValue for Project ID= 1
  6. [10] target_init()
  7. [80] eMMC_Total_Sector = 0x3a40000 (61079552)
  8. [80] mmc: taac: 15000000, mclk_rate: 49152000, nsac: 100
  9. [90] mmc: Read timeout set: 7472800 clk
  10. [90] hw reset: 1
  11. [90] QUP IN:bl:8, ff:32, OUT:bl:8, ff:32
  12. [100] WR:Wrote 0x22c01aa to out_ff:0x12460110
  13. [100] RD:Wrote 0x40101ab to out_ff:0x12460114
  14. [100] idx:8, rem:1, num:2, mode:0
  15. [110] emergency_shutdown_by_lowlow_battery = 100
  16. [110] PcbValue for Project ID= 1
  17. [110] PcbValue for Project ID= 1
  18. [120] PcbValue for Lcd ID= 0 (read from gpio)
  19. [120] display_init(), PcbId=1, LcdId=0
  20. [120] Init flo/deb LK display.
  21. [130] display_init(), JDI panel
  22. [130] mipi_JDI_cmd_1080p_init+, HwValue = 0, LcdID_minor = 1
  23. [140] mipi_JDI_cmd_1080p_init-
  24. [140] LCM_XRES config
  25. [140] JDI_IOVCC on
  26. [160] EN_VDD_BL on
  27. [180] LCM_XRES on
  28. [200] mdp_clock_init+
  29. [210] mdp_clock_init-
  30.  
  31.  
  32.  
  33.  
  34.  
  35.  
  36.  
  37.  
  38.  
  39.  
  40.  
  41. [210] mmss_clock_init+
  42. [210] mmss_clock_init-
  43. [210] Config MIPI_CMD_PANEL.
  44. [420] Data Lane: 0xf
  45. [420] Turn on MIPI_CMD_PANEL.
  46. [430] mipi_JDI_cmd_1080p_on+
  47. [430] PWM config
  48. [430] mipi_JDI_cmd_1080p_on-
  49. [430] ASUS_charger_mode start
  50. [440] save_reboot_reason = 77665500
  51. [440] Power on reason 4
  52. [440] get_power_on_reason = Reboot
  53. [440] Power on reason 4
  54. [450] get_power_on_reason = Reboot
  55. [450] Power on reason 4
  56. [450] get_power_on_reason = Reboot
  57. [460] WR:Wrote 0x22c01aa to out_ff:0x12460110
  58. [460] RD:Wrote 0x40101ab to out_ff:0x12460114
  59. [460] idx:8, rem:1, num:2, mode:0
  60. [470] low_capacity_check: battery capacity = 100
  61. [470] Battery capacity > low Battery voltage; show bootup logo
  62. [480] Total number of decoded_array elements:285936
  63. [490] PcbValue for Project ID= 1
  64. [490] PcbValue for Lcd ID= 0
  65. [500] Total number of decoded_array elements:20304
  66. [500] PcbValue for Project ID= 1
  67. [500] PcbValue for Lcd ID= 0
  68. [500] PcbValue for Project ID= 1
  69. [520] backlight command (102)
  70. [540] LCD_BL_EN on (after SR2)
  71. [540] OdmData Value:2
  72. [540] PcbValue for Project ID= 1
  73. [550] [BL] Asus_security_flag = 0x55
  74. [550] [BL] ASUS_Get_Fuse_Info - fuse_info=Y
  75. [550] GetDDRID: ddr_id = 0
  76. [560] PcbValue for Project ID= 1
  77. [560] eMMC_Total_Sector = 0x3a40000
  78. [560] baseband_str:G0012300720
  79. [570] baseband_ver:G00_1.23.0_0720
  80. [570] baseband_ver_with_prefix:DEB-G00_1.23.0_0720
  81. [570] vol_up:0 vol_down:0
  82. [580] PcbValue for Project ID= 1
  83. [590] Total number of decoded_array elements:1179072
  84. [600] PcbValue for Project ID= 1
  85. [600] PcbValue for Lcd ID= 0
  86. [600] Total number of decoded_array elements:96408
  87. [610] PcbValue for Project ID= 1
  88. [610] PcbValue for Lcd ID= 0
  89. [610] Total number of decoded_array elements:686700
  90. [620] PcbValue for Project ID= 1
  91. [620] PcbValue for Lcd ID= 0
  92. [640] PcbValue for Project ID= 1
  93. [640] PcbValue for Lcd ID= 0
  94. [670] USB init ept @ 0x8920e000
  95. [690] fastboot_init()
  96. [690] drawing menu start...
  97. [710] udc_start()
  98. [790] Total number of decoded_array elements:686700
  99. [790] Total number of decoded_array elements:686700
  100. [800] Total number of decoded_array elements:689970
  101. [800] Total number of decoded_array elements:689970
  102. [870] -- reset --
  103. [870] -- portchange --
  104. [940] -- reset --
  105. [940] -- portchange --
  106. [1040] fastboot: processing commands
  107. [2040] fastboot: download:006b3000
  108. [2050] Bootloader is unlocked!
  109. [2330] fastboot: boot
  110. [2350] UART is disabled!
  111. [2350] Power on reason 4
  112. [2350] Power on reason 4
  113. [2360] get_power_on_reason = Reboot
  114. [2360] cmdline: androidboot.hardware=flo user_debug=31 msm_rtb.filter=0x3F ehci-hcd.park=3 console=ttyMSM0,115200,n8 androidboot.selinux=permis0
  115. [2390] PcbValue for Project ID= 1
  116. [2390] PcbValue for Lcd ID= 0
  117. [2390] PcbValue for Project ID= 1
  118. [2390] Machine FLO was detected
  119. [ 0.000000] Booting Linux on physical CPU 0x0
  120. [ 0.000000] Linux version 4.7.0-rc6-28118-g65cfd42-dirty (vinay@vinay) (gcc version 4.9.3 20150113 (prerelease) (Linaro GCC 4.9-2015.01-3) )6
  121. [ 0.000000] CPU: ARMv7 Processor [511f06f0] revision 0 (ARMv7), cr=10c5787d
  122. [ 0.000000] CPU: div instructions available: patching division code
  123. [ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, PIPT instruction cache
  124. [ 0.000000] Machine model: Asus Nexus7(flo)
  125. [ 0.000000] Memory policy: Data cache writealloc
  126. [ 0.000000] On node 0 totalpages: 512255
  127. [ 0.000000] free_area_init_node: node 0, pgdat c0e7b300, node_mem_map e93fe000
  128. [ 0.000000] Normal zone: 1348 pages used for memmap
  129. [ 0.000000] Normal zone: 0 pages reserved
  130. [ 0.000000] Normal zone: 161024 pages, LIFO batch:31
  131. [ 0.000000] HighMem zone: 351231 pages, LIFO batch:31
  132. [ 0.000000] percpu: Embedded 12 pages/cpu @e93a7000 s28480 r0 d20672 u49152
  133. [ 0.000000] pcpu-alloc: s28480 r0 d20672 u49152 alloc=12*4096
  134. [ 0.000000] pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3
  135. [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 510907
  136. [ 0.000000] Kernel command line: androidboot.hardware=flo user_debug=31 msm_rtb.filter=0x3F ehci-hcd.park=3 console=ttyMSM0,115200,n8 androi5
  137. [ 0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes)
  138. [ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
  139. [ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
  140. [ 0.000000] Memory: 2018580K/2049020K available (7368K kernel code, 573K rwdata, 2048K rodata, 1024K init, 428K bss, 30440K reserved, 0K cma)
  141. [ 0.000000] Virtual kernel memory layout:
  142. [ 0.000000] vector : 0xffff0000 - 0xffff1000 ( 4 kB)
  143. [ 0.000000] fixmap : 0xffc00000 - 0xfff00000 (3072 kB)
  144. [ 0.000000] vmalloc : 0xea800000 - 0xff800000 ( 336 MB)
  145. [ 0.000000] lowmem : 0xc0000000 - 0xea400000 ( 676 MB)
  146. [ 0.000000] pkmap : 0xbfe00000 - 0xc0000000 ( 2 MB)
  147. [ 0.000000] .text : 0xc0208000 - 0xc0c3206c (10409 kB)
  148. [ 0.000000] .init : 0xc0d00000 - 0xc0e00000 (1024 kB)
  149. [ 0.000000] .data : 0xc0e00000 - 0xc0e8f5f8 ( 574 kB)
  150. [ 0.000000] .bss : 0xc0e91000 - 0xc0efc1d4 ( 429 kB)
  151. [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
  152. [ 0.000000] Preemptible hierarchical RCU implementation.
  153. [ 0.000000] Build-time adjustment of leaf fanout to 32.
  154. [ 0.000000] NR_IRQS:16 nr_irqs:16 16
  155. [ 0.000000] clocksource: dg_timer: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 283149695806 ns
  156. [ 0.000007] sched_clock: 32 bits at 6MHz, resolution 148ns, wraps every 318145725365ns
  157. [ 0.000026] Switching to timer-based delay loop, resolution 148ns
  158. [ 0.000499] Console: colour dummy device 80x30
  159. [ 0.000532] Calibrating delay loop (skipped), value calculated using timer frequency.. 13.50 BogoMIPS (lpj=67500)
  160. [ 0.000556] pid_max: default: 32768 minimum: 301
  161. [ 0.000658] Security Framework initialized
  162. [ 0.000677] SELinux: Initializing.
  163. [ 0.000747] SELinux: Starting in permissive mode
  164. [ 0.000812] Mount-cache hash table entries: 2048 (order: 1, 8192 bytes)
  165. [ 0.000831] Mountpoint-cache hash table entries: 2048 (order: 1, 8192 bytes)
  166. [ 0.001770] CPU: Testing write buffer coherency: ok
  167. [ 0.002220] CPU0: thread -1, cpu 0, socket 0, mpidr 80000000
  168. [ 0.002284] Setting up static identity map for 0x80300000 - 0x80300058
  169. [ 0.123078] CPU1: thread -1, cpu 1, socket 0, mpidr 80000001
  170. [ 0.163607] CPU2: thread -1, cpu 2, socket 0, mpidr 80000002
  171. [ 0.204135] CPU3: thread -1, cpu 3, socket 0, mpidr 80000003
  172. [ 0.204455] Brought up 4 CPUs
  173. [ 0.204483] SMP: Total of 4 processors activated (54.00 BogoMIPS).
  174. [ 0.204495] CPU: All CPU(s) started in SVC mode.
  175. [ 0.207654] devtmpfs: initialized
  176. [ 0.220545] VFP support v0.3: implementor 51 architecture 64 part 6f variant 1 rev 0
  177. [ 0.221070] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns
  178. [ 0.221312] pinctrl core: initialized pinctrl subsystem
  179. [ 0.222914] NET: Registered protocol family 16
  180. [ 0.223588] DMA: preallocated 256 KiB pool for atomic coherent allocations
  181. [ 0.253820] cpuidle: using governor menu
  182. [ 0.271093] hw-breakpoint: Failed to enable monitor mode on CPU 1.
  183. [ 0.271107] hw-breakpoint: Failed to enable monitor mode on CPU 3.
  184. [ 0.271120] hw-breakpoint: Failed to enable monitor mode on CPU 2.
  185. [ 0.274390] qcom_rpm 108000.rpm: RPM firmware 3.0.16842936
  186. [ 0.317836] s1: Bringing 0uV into 1225000-1225000uV
  187. [ 0.318588] qcom_rpm_reg 108000.rpm:regulators: regulator requires qcom,switch-mode-frequency property
  188. [ 0.318607] qcom_rpm_reg 108000.rpm:regulators: driver callback failed to parse DT for regulator s2
  189. [ 0.318951] s3: Bringing 0uV into 500000-500000uV
  190. [ 0.319342] s4: Bringing 0uV into 1800000-1800000uV
  191. [ 0.320297] s7: Bringing 0uV into 1300000-1300000uV
  192. [ 0.320673] qcom_rpm_reg 108000.rpm:regulators: regulator requires qcom,switch-mode-frequency property
  193. [ 0.320690] qcom_rpm_reg 108000.rpm:regulators: driver callback failed to parse DT for regulator s8
  194. [ 0.321146] l1: supplied by s4
  195. [ 0.321684] l2: supplied by s4
  196. [ 0.321794] l2: Bringing 0uV into 1200000-1200000uV
  197. [ 0.322628] l3: Bringing 0uV into 3075000-3075000uV
  198. [ 0.323087] l4: Bringing 0uV into 1800000-1800000uV
  199. [ 0.323605] l5: Bringing 0uV into 2950000-2950000uV
  200. [ 0.324655] l6: Bringing 0uV into 2950000-2950000uV
  201. [ 0.327741] l11: Bringing 0uV into 3000000-3000000uV
  202. [ 0.329028] l12: supplied by s4
  203. [ 0.332511] l17: Bringing 0uV into 3000000-3000000uV
  204. [ 0.333990] l18: supplied by s4
  205. [ 0.337455] l23: Bringing 0uV into 1800000-1800000uV
  206. [ 0.338722] l24: supplied by s1
  207. [ 0.340093] l25: supplied by s1
  208. [ 0.340192] l25: Bringing 0uV into 1250000-1250000uV
  209. [ 0.341507] l26: supplied by s7
  210. [ 0.342954] l27: supplied by s7
  211. [ 0.344403] l28: supplied by s7
  212. [ 0.347447] lvs1: supplied by s4
  213. [ 0.349023] lvs2: supplied by s1
  214. [ 0.350631] lvs3: supplied by s4
  215. [ 0.352290] lvs4: supplied by s4
  216. [ 0.353969] lvs5: supplied by s4
  217. [ 0.355736] lvs6: supplied by s4
  218. [ 0.357493] lvs7: supplied by s4
  219. [ 0.363457] qcom_rpm_reg 108000.rpm:regulators: regulator requires qcom,switch-mode-frequency property
  220. [ 0.363475] qcom_rpm_reg 108000.rpm:regulators: driver callback failed to parse DT for regulator ncp
  221. [ 0.363604] ncp: supplied by l6
  222. [ 0.366245] SCSI subsystem initialized
  223. [ 0.366626] usbcore: registered new interface driver usbfs
  224. [ 0.366709] usbcore: registered new interface driver hub
  225. [ 0.366886] usbcore: registered new device driver usb
  226. [ 0.367350] Advanced Linux Sound Architecture Driver Initialized.
  227. [ 0.369995] clocksource: Switched to clocksource dg_timer
  228. [ 0.474111] NET: Registered protocol family 2
  229. [ 0.474940] TCP established hash table entries: 8192 (order: 3, 32768 bytes)
  230. [ 0.475001] TCP bind hash table entries: 8192 (order: 4, 65536 bytes)
  231. [ 0.475086] TCP: Hash tables configured (established 8192 bind 8192)
  232. [ 0.475159] UDP hash table entries: 512 (order: 2, 16384 bytes)
  233. [ 0.475189] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
  234. [ 0.475435] NET: Registered protocol family 1
  235. [ 0.475988] Trying to unpack rootfs image as initramfs...
  236. [ 0.541273] Freeing initrd memory: 888K (c2200000 - c22de000)
  237. [ 0.542008] hw perfevents: enabled with armv7_krait PMU driver, 5 counters available
  238. [ 0.544274] futex hash table entries: 1024 (order: 4, 65536 bytes)
  239. [ 0.544351] audit: initializing netlink subsys (disabled)
  240. [ 0.544447] audit: type=2000 audit(0.539:1): initialized
  241. [ 0.545738] workingset: timestamp_bits=28 max_order=19 bucket_order=0
  242. [ 0.556061] fuse init (API version 7.25)
  243. [ 0.556961] SELinux: Registering netfilter hooks
  244. [ 0.572567] bounce: pool size: 64 pages
  245. [ 0.572660] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
  246. [ 0.572681] io scheduler noop registered
  247. [ 0.572694] io scheduler deadline registered
  248. [ 0.572746] io scheduler cfq registered (default)
  249. [ 0.577685] gsbi 12440000.gsbi: GSBI port protocol: 2 crci: 0
  250. [ 0.578428] gsbi 16200000.gsbi: GSBI port protocol: 2 crci: 0
  251. [ 0.578971] gsbi 16500000.gsbi: GSBI port protocol: 6 crci: 0
  252. [ 0.579955] gsbi 16600000.gsbi: GSBI port protocol: 6 crci: 0
  253. [ 0.584814] msm_serial 16540000.serial: msm_serial: detected port #1
  254. [ 0.584906] msm_serial 16540000.serial: uartclk = 27000000
  255. [ 0.584989] 16540000.serial: ttyMSM1 at MMIO 0x16540000 (irq = 124, base_baud = 1687500) is a MSM
  256. [ 0.585721] msm_serial 16640000.serial: msm_serial: detected port #0
  257. [ 0.585804] msm_serial 16640000.serial: uartclk = 1843200
  258. [ 0.585884] 16640000.serial: ttyMSM0 at MMIO 0x16640000 (irq = 126, base_baud = 115200) is a MSM
  259. [ 0.585933] msm_serial: console setup on port #0
  260. [ 1.399369] console [ttyMSM0] enabled
  261. [ 1.404715] msm_serial: driver initialized
  262. [ 1.408526] [drm] Initialized drm 1.1.0 20060810
  263. [ 1.411554] [drm:msm_drm_register] init
  264. [ 1.416226] [drm:msm_mdp_register]
  265. [ 1.420023] [drm:msm_dsi_register]
  266. [ 1.423747] 4700200.dsi-phy supply vddio not found, using dummy regulator
  267. [ 1.426884] msm_dsi_phy 4700200.dsi-phy: dsi_phy_driver_probe: Unable to get ahb clk
  268. [ 1.434338] clk: couldn't get parent clock 0 for /soc/dsi@4700000
  269. [ 1.441683] [drm:msm_edp_register]
  270. [ 1.448023] 4a00400.hdmi-phy supply core-vdda not found, using dummy regulator
  271. [ 1.450986] msm_hdmi_phy 4a00400.hdmi-phy: failed to get phy clock: slave_iface_clk (-517)
  272. [ 1.478446] brd: module loaded
  273. [ 1.489275] loop: module loaded
  274. [ 1.489640] ssbi 500000.qcom,ssbi: SSBI controller type: 'pmic-arbiter'
  275. [ 1.491949] pm8921_probe: PMIC revision 1: F4
  276. [ 1.497835] pm8921_probe: PMIC revision 2: 06
  277. [ 1.513648] SCSI Media Changer driver v0.25
  278. [ 1.515457] tun: Universal TUN/TAP device driver, 1.6
  279. [ 1.516984] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
  280. [ 1.522656] PPP generic driver version 2.4.2
  281. [ 1.528448] PPP BSD Compression module registered
  282. [ 1.532531] PPP Deflate Compression module registered
  283. [ 1.537058] PPP MPPE Compression module registered
  284. [ 1.542166] SLIP: version 0.8.4-NET3.019-NEWTTY (dynamic channels, max=256) (6 bit encapsulation enabled).
  285. [ 1.546766] CSLIP: code copyright 1989 Regents of the University of California.
  286. [ 1.556724] usbcore: registered new interface driver ax88179_178a
  287. [ 1.563741] usbcore: registered new interface driver cdc_ether
  288. [ 1.569909] usbcore: registered new interface driver net1080
  289. [ 1.575724] usbcore: registered new interface driver cdc_subset
  290. [ 1.581544] usbcore: registered new interface driver cdc_ncm
  291. [ 1.587412] msm_otg 12500000.phy: OTG regs = eaaaa000
  292. [ 1.701162] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
  293. [ 1.701221] ehci-msm: Qualcomm On-Chip EHCI Host Controller
  294. [ 1.707012] msm_hsusb_host 12500000.usb: EHCI Host Controller
  295. [ 1.712594] msm_hsusb_host 12500000.usb: new USB bus registered, assigned bus number 1
  296. [ 1.718103] msm_hsusb_host 12500000.usb: irq 24, io mem 0x12500000
  297. [ 1.725934] usbcore: registered new interface driver cdc_acm
  298. [ 1.725940] cdc_acm: USB Abstract Control Model driver for USB modems and ISDN adapters
  299. [ 1.726011] usbcore: registered new interface driver usb-storage
  300. [ 1.726150] usbcore: registered new interface driver usbserial
  301. [ 1.751851] mousedev: PS/2 mouse device common for all mice
  302. [ 1.752856] input: pmic8xxx_pwrkey as /devices/platform/soc/500000.qcom,ssbi/500000.qcom,ssbi:pmic@0/500000.qcom,ssbi:pmic@0:pwrkey@1c/input0
  303. [ 1.763960] rtc-pm8xxx 500000.qcom,ssbi:pmic@0:rtc@11d: rtc core: registered pm8xxx_rtc as rtc0
  304. [ 1.776361] i2c /dev entries driver
  305. [ 1.784802] msm_hsusb_host 12500000.usb: USB 2.0 started, EHCI 1.00
  306. [ 1.785412] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
  307. [ 1.785424] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
  308. [ 1.785435] usb usb1: Product: EHCI Host Controller
  309. [ 1.785441] usb usb1: Manufacturer: Linux 4.7.0-rc6-28118-g65cfd42-dirty ehci_hcd
  310. [ 1.785449] usb usb1: SerialNumber: 12500000.usb
  311. [ 1.788636] hub 1-0:1.0: USB hub found
  312. [ 1.788731] hub 1-0:1.0: 1 port detected
  313. [ 1.832975] apq8064-pinctrl 800000.pinctrl: pin GPIO_16 already requested by 16540000.serial; cannot claim for 16580000.i2c
  314. [ 1.833248] apq8064-pinctrl 800000.pinctrl: pin-16 (16580000.i2c) status -22
  315. [ 1.833262] 1-0010 supply vcc33 not found, using dummy regulator
  316. [ 1.833687] 1-0010 supply vccio not found, using dummy regulator
  317. [ 1.857372] apq8064-pinctrl 800000.pinctrl: could not request pin 16 (GPIO_16) from group gpio16 on device 800000.pinctrl
  318. [ 1.863454] i2c_qup 16580000.i2c: Error applying setting, reverse things back
  319. [ 1.876367] thermal thermal_zone0: failed to read out thermal zone (-19)
  320. [ 1.882029] bq27xxx-battery 0-0055: support ver. 1.2.0 enabled
  321. [ 1.899960] device-mapper: uevent: version 1.0.3
  322. [ 1.901061] device-mapper: ioctl: 4.34.0-ioctl (2015-10-28) initialised: dm-devel@redhat.com
  323. [ 1.906283] mmci-pl18x 12400000.sdcc: mmc0: PL180 manf 51 rev0 at 0x12400000 irq 28,0 (pio)
  324. [ 1.912478] mmci-pl18x 12400000.sdcc: DMA channels RX dma0chan1, TX dma0chan2
  325. [ 1.920694] s4: voltage operation not allowed
  326. [ 1.927427] mmci-pl18x 12400000.sdcc: Voltage switch failed
  327. [ 1.963963] input: Elan Touchscreen as /devices/platform/soc/16200000.gsbi/16280000.i2c/i2c-1/1-0010/input/input1
  328. [ 1.970341] sdhci: Secure Digital Host Controller Interface driver
  329. [ 1.973285] sdhci: Copyright(c) Pierre Ossman
  330. [ 1.974232] elants_i2c 1-0010: unknown packet ff ff ff ff
  331. [ 1.985813] sdhci-pltfm: SDHCI platform and OF driver helper
  332. [ 1.989621] hidraw: raw HID events driver (C) Jiri Kosina
  333. [ 1.995632] usbcore: registered new interface driver usbhid
  334. [ 2.000260] usbhid: USB HID core driver
  335. [ 2.006077] ashmem: initialized
  336. [ 2.029969] oprofile: using timer interrupt.
  337. [ 2.030270] u32 classifier
  338. [ 2.033354] Actions configured
  339. [ 2.035827] Netfilter messages via NETLINK v0.30.
  340. [ 2.039527] nf_conntrack version 0.5.0 (16384 buckets, 65536 max)
  341. [ 2.044665] ctnetlink v0.93: registering with nfnetlink.
  342. [ 2.050321] nf_tables: (c) 2007-2009 Patrick McHardy <kaber@trash.net>
  343. [ 2.055812] xt_time: kernel timezone is -0000
  344. [ 2.062454] ip_tables: (C) 2000-2006 Netfilter Core Team
  345. [ 2.066500] arp_tables: arp_tables: (C) 2002 David S. Miller
  346. [ 2.071840] Initializing XFRM netlink socket
  347. [ 2.078263] NET: Registered protocol family 10
  348. [ 2.087896] mmc0: new high speed MMC card at address 0001
  349. [ 2.093558] mip6: Mobile IPv6
  350. [ 2.093641] ip6_tables: (C) 2000-2006 Netfilter Core Team
  351. [ 2.095745] sit: IPv6 over IPv4 tunneling driver
  352. [ 2.101539] mmcblk0: mmc0:0001 HBG4e 29.1 GiB
  353. [ 2.106413] NET: Registered protocol family 17
  354. [ 2.109882] mmcblk0boot0: mmc0:0001 HBG4e partition 1 4.00 MiB
  355. [ 2.114568] NET: Registered protocol family 15
  356. [ 2.120289] mmcblk0boot1: mmc0:0001 HBG4e partition 2 4.00 MiB
  357. [ 2.125085] mmcblk0rpmb: mmc0:0001 HBG4e partition 3 4.00 MiB
  358. [ 2.131178] Registering SWP/SWPB emulation handler
  359. [ 2.140459] mmcblk0: p1 p2 p3 p4 p5 p6 p7 p8 p9 p10 p11 p12 p13 p14 p15 p16 p17 p18 p19 p20 p21 p22 p23 p24 p25 p26 p27 p28 p29 p30
  360. [ 2.156216] 4700200.dsi-phy supply vddio not found, using dummy regulator
  361. [ 2.156673] [drm:pll_28nm_register] 1
  362. [ 2.162354] [drm:dsi_pll_28nm_clk_recalc_rate] returning vco rate = 892000000
  363. [ 2.166769] [drm:msm_dsi_pll_init] DSI:0 PLL registered
  364. [ 2.175095] [drm:msm_mdss_init]
  365. [ 2.178114] [drm:dsi_bind]
  366. [ 2.181384] [drm:dsi_init] dsi probed=e84a3710
  367. [ 2.183864] msm_dsi 4700000.dsi: dsi_host_parse_dt: invalid lane configuration -22
  368. [ 2.188315] msm_dsi_host_init: failed to parse dt
  369. [ 2.196025] msm 5100000.mdp: failed to bind 4700000.dsi (ops dsi_ops): -22
  370. [ 2.200954] msm 5100000.mdp: master bind failed: -22
  371. [ 2.207453] msm_dsi: probe of 4700000.dsi failed with error -22
  372. [ 2.213709] 4a00400.hdmi-phy supply core-vdda not found, using dummy regulator
  373. [ 2.221459] input: gpio-keys as /devices/platform/gpio-keys/input/input2
  374. [ 2.226921] rtc-pm8xxx 500000.qcom,ssbi:pmic@0:rtc@11d: setting system clock to 2016-07-12 15:00:50 UTC (1468335650)
  375. [ 2.288599] ext_3p3v: disabling
  376. [ 2.288926] vcc_1p8v: disabling
  377. [ 2.291376] [drm:pll_28nm_poll_for_ready] DSI PLL is locked
  378. [ 2.294418] ALSA device list:�[ 2.306007] Freeing unused kernel memory: 1024K (c0d00000 - c0e00000)
  379. [ 2.316623] init: init started!
  380. [ 2.340885] SELinux: 2048 avtab hash slots, 5401 rules.
  381. [ 2.346913] SELinux: Android master kernel running Android M policy in compatibility mode.
  382. [ 2.358565] SELinux: 2048 avtab hash slots, 5401 rules.
  383. [ 2.358695] SELinux: 1 users, 2 roles, 581 types, 0 bools, 1 sens, 1024 cats
  384. [ 2.369637] SELinux: 87 classes, 5401 rules
  385. [ 2.375287] SELinux: Permission validate_trans in class security not defined in policy.
  386. [ 2.375439] SELinux: Permission module_load in class system not defined in policy.
  387. [ 2.383664] SELinux: Class netlink_iscsi_socket not defined in policy.
  388. [ 2.389906] SELinux: Class netlink_fib_lookup_socket not defined in policy.
  389. [ 2.396553] SELinux: Class netlink_connector_socket not defined in policy.
  390. [ 2.403845] SELinux: Class netlink_netfilter_socket not defined in policy.
  391. [ 2.410617] SELinux: Class netlink_generic_socket not defined in policy.
  392. [ 2.417370] SELinux: Class netlink_scsitransport_socket not defined in policy.
  393. [ 2.424414] SELinux: Class netlink_rdma_socket not defined in policy.
  394. [ 2.431526] SELinux: Class netlink_crypto_socket not defined in policy.
  395. [ 2.438164] SELinux: Permission audit_read in class capability2 not defined in policy.
  396. [ 2.445077] SELinux: Class cap_userns not defined in policy.
  397. [ 2.452703] SELinux: Class cap2_userns not defined in policy.
  398. [ 2.458511] SELinux: the above unknown classes and permissions will be denied
  399. [ 2.464416] SELinux: Completing initialization.
  400. [ 2.471560] SELinux: Setting up existing superblocks.
  401. [ 2.612153] audit: type=1403 audit(1468335650.879:2): policy loaded auid=4294967295 ses=4294967295
  402. [ 2.614208] init: (Initializing SELinux non-enforcing took 0.30s.)
  403. [ 2.668790] init: init second stage started!
  404. [ 2.844112] init: waitpid failed: No child processes
  405. [ 2.845470] init: (Loading properties from /default.prop took 0.00s.)
  406. [ 2.857834] init: (Parsing /init.environ.rc took 0.00s.)
  407. [ 2.858967] init: (Parsing /init.usb.rc took 0.00s.)
  408. [ 2.867498] init: (Parsing init.flo.usb.rc took 0.00s.)
  409. [ 2.867850] init: (Parsing init.flo.diag.rc took 0.00s.)
  410. [ 2.872318] init: (Parsing /init.flo.rc took 0.01s.)
  411. [ 2.878266] init: (Parsing /init.zygote32.rc took 0.00s.)
  412. [ 2.883401] init: (Parsing /init.trace.rc took 0.00s.)
  413. [ 2.888007] init: (Parsing /init.rc took 0.04s.)
  414. [ 2.893653] init: SELinux: Could not get canonical path /adb_keys restorecon: No such file or directory.
  415. [ 2.897994] init: Starting service 'ueventd'...
  416. [ 2.910016] init: Waiting for /dev/.coldboot_done...
  417. [ 2.917390] ueventd: ueventd started!
  418. [ 3.915308] init: Timed out waiting for /dev/.coldboot_done
  419. [ 3.915549] init: Waiting for /dev/.coldboot_done took 1.01s.
  420. [ 3.9�[ 4.053326] audit: type=1400 audit(1468335652.319:3): avc: denied { write } for pid=1 comm="init" name="cpu" dev="proc" ino=40261
  421. [ 4.053529] audit: type=1400 audit(1468335652.319:4): avc: denied { add_name } for pid=1 comm="init" name="alignment" scontext=u:r:init:s1
  422. [ 4.071305] audit: type=1400 audit(1468335652.339:5): avc: denied { create } for pid=1 comm="init" name="alignment" scontext=u:r:init:s0 1
  423. [ 4.089029] init: write_file: Unable to open '/proc/sys/kernel/sched_latency_ns': No such file or directory
  424. [ 4.105766] init: write_file: Unable to open '/proc/sys/kernel/sched_wakeup_granularity_ns': No such file or directory
  425. [ 4.115289] init: write_file: Unable to open '/proc/sys/kernel/sched_compat_yield': No such file or directory
  426. [ 4.134512] audit: type=1400 audit(1468335652.399:6): avc: denied { create } for pid=1 comm="init" name="cpu.shares" scontext=u:r:init:s01
  427. [ 4.135811] init: write_file: Unable to write to '/dev/cpuctl/cpu.shares': Invalid argument
  428. [ 4.163551] init: write_file: Unable to open '/proc/sys/abi/swp': No such file or directory
  429. [ 4.166724] audit: type=1400 audit(1468335652.429:7): avc: denied { associate } for pid=1 comm="init" name="g1" scontext=u:object_r:unlab1
  430. [ 4.175111] file system registered
  431. [ 4.195070] init: Starting service 'adbd'...
  432. [ 4.209745] read descriptors
  433. [ 4.209790] read strings
  434. [ 4.212723] EXT4-fs (mmcblk0p22): mounted filesystem without journal. Opts: barrier=1
  435. [ 4.212894] fs_mgr: __mount(source=/dev/block/platform/soc/soc:amba/by-name/system,target=/system,type=ext4)=0
  436. [ 4.214434] audit: type=1400 audit(1468335652.479:8): avc: denied { mounton } for pid=119 comm="init" path="/cache" dev="rootfs" ino=12301
  437. [ 4.222232] EXT4-fs (mmcblk0p23): Ignoring removed nomblk_io_submit option
  438. [ 4.259945] ueventd: Coldboot took 1.30s.
  439. [ 4.260581] EXT4-fs (mmcblk0p23): mounted filesystem with ordered data mode. Opts: nomblk_io_submit,errors=remount-ro
  440. [ 4.263251] fs_mgr: check_fs(): mount(/dev/block/platform/soc/soc:amba/by-name/cache,/cache,ext4)=0: Success
  441. [ 4.325041] fs_mgr: check_fs(): unmount(/cache) succeeded
  442. [ 4.326741] fs_mgr: Running /system/bin/e2fsck on /dev/block/platform/soc/soc:amba/by-name/cache
  443. [ 4.431031] audit: type=1400 audit(1468335652.699:9): avc: denied { getattr } for pid=125 comm="e2fsck" path="/dev/block/mmcblk0p23" dev=1
  444. [ 4.431425] audit: type=1400 audit(1468335652.699:10): avc: denied { read } for pid=125 comm="e2fsck" name="mmcblk0p23" dev="tmpfs" ino=91
  445. [ 4.459114] e2fsck: e2fsck 1.42.9 (28-Dec-2013)
  446. [ 4.459114]
  447. [ 4.472161] e2fsck: cache: clean, 16/2048 files, 1172/8192 blocks
  448. [ 4.472161]
  449. [ 4.482854] EXT4-fs (mmcblk0p23): Ignoring removed nomblk_io_submit option
  450. [ 4.504867] EXT4-fs (mmcblk0p23): mounted filesystem with ordered data mode. Opts: barrier=1,data=ordered,nomblk_io_submit,errors=panic
  451. [ 4.505171] fs_mgr: __mount(source=/dev/block/platform/soc/soc:amba/by-name/cache,target=/cache,type=ext4)=0
  452. [ 4.520350] EXT4-fs (mmcblk0p30): Ignoring removed nomblk_io_submit option
  453. [ 4.536166] EXT4-fs (mmcblk0p30): mounted filesystem with ordered data mode. Opts: nomblk_io_submit,errors=remount-ro
  454. [ 4.536443] fs_mgr: check_fs(): mount(/dev/block/platform/soc/soc:amba/by-name/userdata,/data,ext4)=0: Success
  455. [ 4.575715] fs_mgr: check_fs(): unmount(/data) succeeded
  456. [ 4.575878] fs_mgr: Running /system/bin/e2fsck on /dev/block/platform/soc/soc:amba/by-name/userdata
  457. [ 4.804938] e2fsck: e2fsck 1.42.9 (28-Dec-2013)
  458. [ 4.804938]
  459. [ 4.805112] e2fsck: data: clean, 649/753664 files, 130908/3014656 blocks
  460. [ 4.805112]
  461. [ 4.815050] EXT4-fs (mmcblk0p30): Ignoring removed nomblk_io_submit option
  462. [ 4.828685] EXT4-fs (mmcblk0p30): mounted filesystem with ordered data mode. Opts: barrier=1,data=ordered,nomblk_io_submit,errors=panic
  463. [ 4.828981] fs_mgr: __mount(source=/dev/block/platform/soc/soc:amba/by-name/userdata,target=/data,type=ext4)=0
  464. [ 4.865075] EXT4-fs (mmcblk0p4): mounted filesystem with ordered data mode. Opts: barrier=1,data=ordered,nodelalloc
  465. [ 4.865387] fs_mgr: __mount(source=/dev/block/platform/soc/soc:amba/by-name/persist,target=/persist,type=ext4)=0
  466. [ 4.882955] init: write_file: Unable to open '/sys/kernel/boot_adsp/boot': No such file or directory
  467. [ 4.892148] init: Starting service 'logd'...
  468. [ 4.913304] init: Starting service 'vold'...
  469. [ 4.918843] init: Not bootcharting.
  470. [ 5.016693] logd.auditd: start
  471. [ 5.016982] logd.klogd: 5016976442
  472. [ 5.058827] init: Starting service 'exec 0 (/system/bin/tzdatacheck)'...
  473. [ 5.149252] init: Service 'exec 0 (/system/bin/tzdatacheck)' (pid 144) exited with status 0
  474. [ 5.150460] init: write_file: Unable to open '/sys/module/wcnss_ssr_8960/parameters/enable_riva_ssr': No such file or directory
  475. [ 5.192002] init: write_file: Unable to open '/sys/class/timed_output/vibrator/amp': No such file or directory
  476. [ 5.192271] init: write_file: Unable to open '/sys/module/rpm_resources/enable_low_power/L2_cache': No such file or directory
  477. [ 5.201367] init: write_file: Unable to open '/sys/module/rpm_resources/enable_low_power/pxo': No such file or directory
  478. [ 5.212626] init: write_file: Unable to open '/sys/module/rpm_resources/enable_low_power/vdd_dig': No such file or directory
  479. [ 5.223716] init: write_file: Unable to open '/sys/module/rpm_resources/enable_low_power/vdd_mem': No such file or directory
  480. [ 5.234780] init: write_file: Unable to open '/sys/module/pm_8x60/modes/cpu0/power_collapse/suspend_enabled': No such file or directory
  481. [ 5.246038] init: write_file: Unable to open '/sys/module/pm_8x60/modes/cpu1/power_collapse/suspend_enabled': No such file or directory
  482. [ 5.257867] init: write_file: Unable to open '/sys/module/pm_8x60/modes/cpu2/power_collapse/suspend_enabled': No such file or directory
  483. [ 5.270206] init: write_file: Unable to open '/sys/module/pm_8x60/modes/cpu3/power_collapse/suspend_enabled': No such file or directory
  484. [ 5.282169] init: write_file: Unable to open '/sys/module/pm_8x60/modes/cpu0/power_collapse/idle_enabled': No such file or directory
  485. [ 5.294456] init: write_file: Unable to open '/sys/devices/system/cpu/cpu0/cpufreq/scaling_governor': No such file or directory
  486. [ 5.306655] init: write_file: Unable to open '/sys/devices/system/cpu/cpu1/cpufreq/scaling_governor': No such file or directory
  487. [ 5.317849] init: write_file: Unable to open '/sys/devices/system/cpu/cpu2/cpufreq/scaling_governor': No such file or directory
  488. [ 5.329254] init: write_file: Unable to open '/sys/devices/system/cpu/cpu3/cpufreq/scaling_governor': No such file or directory
  489. [ 5.340928] init: SELinux: Could not get canonical path /sys/devices/system/cpu/cpufreq/ondemand restorecon: No such file or directory.
  490. [ 5.352069] init: write_file: Unable to open '/sys/devices/system/cpu/cpufreq/ondemand/up_threshold': No such file or directory
  491. [ 5.364289] init: write_file: Unable to open '/sys/devices/system/cpu/cpufreq/ondemand/sampling_rate': No such file or directory
  492. [ 5.376845] init: write_file: Unable to open '/sys/devices/system/cpu/cpufreq/ondemand/io_is_busy': No such file or directory
  493. [ 5.387597] init: write_file: Unable to open '/sys/devices/system/cpu/cpufreq/ondemand/sampling_down_factor': No such file or directory
  494. [ 5.398737] init: write_file: Unable to open '/sys/devices/system/cpu/cpufreq/ondemand/down_differential': No such file or directory
  495. [ 5.410744] init: write_file: Unable to open '/sys/devices/system/cpu/cpufreq/ondemand/up_threshold_multi_core': No such file or directory
  496. [ 5.422849] init: write_file: Unable to open '/sys/devices/system/cpu/cpufreq/ondemand/down_differential_multi_core': No such file or directy
  497. [ 5.435114] init: write_file: Unable to open '/sys/devices/system/cpu/cpufreq/ondemand/optimal_freq': No such file or directory
  498. [ 5.447882] init: write_file: Unable to open '/sys/devices/system/cpu/cpufreq/ondemand/sync_freq': No such file or directory
  499. [ 5.459325] init: write_file: Unable to open '/sys/devices/system/cpu/cpufreq/ondemand/up_threshold_any_cpu_load': No such file or directory
  500. [ 5.472595] init: write_file: Unable to open '/sys/devices/system/cpu/cpu0/cpufreq/scaling_min_freq': No such file or directory
  501. [ 5.483422] init: write_file: Unable to open '/sys/devices/system/cpu/cpu1/cpufreq/scaling_min_freq': No such file or directory
  502. [ 5.494568] init: write_file: Unable to open '/sys/devices/system/cpu/cpu2/cpufreq/scaling_min_freq': No such file or directory
  503. [ 5.506042] init: write_file: Unable to open '/sys/devices/system/cpu/cpu3/cpufreq/scaling_min_freq': No such file or directory
  504. [ 5.518172] init: write_file: Unable to open '/dev/cpuctl/apps/cpu.notify_on_migrate': No such file or directory
  505. [ 5.543149] init: (Loading properties from /system/build.prop took 0.01s.)
  506. [ 5.543456] init: (Loading properties from /vendor/build.prop took 0.00s.)
  507. [ 5.549129] init: (Loading properties from /factory/factory.prop took 0.00s.)
  508. [ 5.556169] init: (Loading properties from /data/local.prop took 0.00s.)
  509. [ 5.566093] random: init urandom read with 22 bits of entropy available
  510. [ 5.613545] init: Starting service 'logd-reinit'...
  511. [ 5.618119] init: write_file: Unable to open '/proc/sys/vm/min_free_order_shift': No such file or directory
  512. [ 5.627154] init: Starting service 'healthd'...
  513. [ 5.630368] init: Starting service 'lmkd'...
  514. [ 5.634385] init: Starting service 'servicemanager'...
  515. [ 5.634809] binder: 152:152 transaction failed 29189, size 0-0
  516. [ 5.644204] init: Starting service 'surfaceflinger'...
  517. [ 5.649757] init: Starting service 'ks_checker'...
  518. [ 5.662725] init: write_file: Unable to open '/sys/module/wakelock/parameters/debug_mask': No such file or directory
  519. [ 5.663323] init: write_file: Unable to open '/proc/sys/net/ipv6/conf/rmnet0/accept_ra': No such file or directory
  520. [ 5.674727] init: write_file: Unable to open '/proc/sys/net/ipv6/conf/rmnet1/accept_ra': No such file or directory
  521. [ 5.682959] init: write_file: Unable to open '/proc/sys/net/ipv6/conf/rmnet2/accept_ra': No such file or directory
  522. [ 5.693353] init: write_file: Unable to open '/proc/sys/net/ipv6/conf/rmnet3/accept_ra': No such file or directory
  523. [ 5.703590] init: write_file: Unable to open '/proc/sys/net/ipv6/conf/rmnet4/accept_ra': No such file or directory
  524. [ 5.713894] init: write_file: Unable to open '/proc/sys/net/ipv6/conf/rmnet5/accept_ra': No such file or directory
  525. [ 5.724251] init: write_file: Unable to open '/proc/sys/net/ipv6/conf/rmnet6/accept_ra': No such file or directory
  526. [ 5.734754] init: write_file: Unable to open '/proc/sys/net/ipv6/conf/rmnet7/accept_ra': No such file or directory
  527. [ 5.744929] init: write_file: Unable to open '/proc/sys/net/ipv6/conf/rmnet_sdio0/accept_ra': No such file or directory
  528. [ 5.755289] init: write_file: Unable to open '/proc/sys/net/ipv6/conf/rmnet_sdio1/accept_ra': No such file or directory
  529. [ 5.767251] init: write_file: Unable to open '/proc/sys/net/ipv6/conf/rmnet_sdio2/accept_ra': No such file or directory
  530. [ 5.776561] logd.daemon: reinit
  531. [ 5.787749] init: Service 'logd-reinit' (pid 151) exited with status 0
  532. [ 5.791019] init: write_file: Unable to open '/proc/sys/net/ipv6/conf/rmnet_sdio3/accept_ra': No such file or directory
  533. [ 5.797024] init: write_file: Unable to open '/proc/sys/net/ipv6/conf/rmnet_sdio4/accept_ra': No such file or directory
  534. [ 5.807875] init: write_file: Unable to open '/proc/sys/net/ipv6/conf/rmnet_sdio5/accept_ra': No such file or directory
  535. [ 5.818991] init: Service 'ks_checker' (pid 156) exited with status 0
  536. [ 5.829699] init: write_file: Unable to open '/proc/sys/net/ipv6/conf/rmnet_sdio6/accept_ra': No such file or directory
  537. [ 5.835917] init: write_file: Unable to open '/proc/sys/net/ipv6/conf/rmnet_sdio7/accept_ra': No such file or directory
  538. [ 5.846655] init: write_file: Unable to open '/sys/module/msm_show_resume_irq/parameters/debug_mask': No such file or directory
  539. [ 5.868922] init: Star�[ 5.872847] init: Starting service 'netd'...
  540. [ 5.875927] init: Starting service 'debuggerd'...
  541. [ 5.877798] init: cannot find '/system/bin/debuggerd64', disabling 'debuggerd64'
  542. [ 5.882472] init: Starting service 'drm'...
  543. [ 5.891486] init: Starting service 'media'...
  544. [ 5.895145] init: Starting service 'installd'...
  545. [ 5.898267] init: cannot find '/system/bin/install-recovery.sh', disabling 'flash_recovery'
  546. [ 5.903226] init: Starting service 'keystore'...
  547. [ 5.912677] init: Starting service 'irsc_util'...
  548. [ 5.917261] init: Starting service 'bridgemgrd'...
  549. [ 5.923961] init: Starting service 'thermald'...
  550. [ 5.926977] init: Starting service 'bdAddrLoader'...
  551. [ 5.933470] init: Starting service 'zygote'...
  552. [ 5.936634] init: Starting service 'gatekeeperd'...
  553. [ 5.978219] init: Starting service 'perfprofd'...
  554. [ 5.991498] init: Starting service 'wcnss_init'...
  555. [ 5.994390] init: Starting service 'qseecomd'...
  556. [ 6.031577] init: Service 'irsc_util' (pid 167) exited with status 0
  557. [ 6.230263] usb 1-1: new high-speed USB device number 2 using msm_hsusb_host
  558. [ 6.241130] init: Service 'bdAddrLoader' (pid 170) exited with status 1
  559. shell@flo:/ $ [ 6.639223] healthd: No charger supplies found
  560. [ 6.705928] init: Service 'wcnss_init' (pid 174) exited with status 1
  561. [ 7.132949] init: Service 'surfaceflinger' (pid 155) killed by signal 6
  562. [ 7.133125] init: Service 'surfaceflinger' (pid 155) killing any children in process group
  563. [ 7.138568] init: Service 'zygote' is being killed...
  564. [ 7.163259] init: Service 'zygote' (pid 171) killed by signal 9
  565. [ 7.163343] init: Service 'zygote' (pid 171) killing any children in process group
  566. [ 7.168294] init: write_file: Unable to open '/sys/android_power/request_state': No such file or directory
  567. [ 7.176641] init: write_file: Unable to write to '/sys/power/state': Invalid argument
  568. [ 7.185902] init: Service 'media' is being killed...
  569. [ 7.193749] init: Service 'netd' is being killed...
  570. [ 7.203566] init: Service 'netd' (pid 160) killed by signal 9
  571. [ 7.203654] init: Service 'netd' (pid 160) killing any children in process group
  572. [ 7.209508] init: Service 'media' (pid 163) killed by signal 9
  573. [ 7.216931] init: Service 'media' (pid 163) killing any children in process group
  574. [ 7.222391] init: Untracked pid 201 killed by signal 9
  575.  
  576. [420] mipi_dsi_panel_initialize : num_of_panel_cmds number = 20
Add Comment
Please, Sign In to add comment
Public Pastes
We use cookies for various purposes including analytics. By continuing to use Pastebin, you agree to our use of cookies as described in the Cookies Policy.  OK, I Understand
Not a member of Pastebin yet?
Sign Up, it unlocks many cool features!