API tools faq
paste
Guest User

Untitled

a guest
Mar 2nd, 2018
319
0
Never
Add comment
Not a member of Pastebin yet? Sign Up, it unlocks many cool features!
text 38.62 KB | None | 0 0
raw download clone embed print report
  1. ~ # dmesg
  2. <6>[ 0.000000] Booting Linux on physical CPU 0
  3. <6>[ 0.000000] Initializing cgroup subsys cpu
  4. <5>[ 0.000000] Linux version 3.4.67-cyanogenmod-g200870d-dirty (sailfish@sailfishVB) (gcc version 4.7 (GCC) ) #3 SMP PREEMPT Fri Mar 2 07:01:02 UTC 2018
  5. <4>[ 0.000000] CPU: ARMv7 Processor [410fc0f4] revision 4 (ARMv7), cr=10c5387d
  6. <4>[ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, PIPT instruction cache
  7. <4>[ 0.000000] Machine: Manta
  8. <6>[ 0.000000] Initialized persistent memory from a0000000-a01fffff
  9. <6>[ 0.000000] ion_reserve: ion_chunk_heap reserved base 90000000 size 268435456
  10. <4>[ 0.000000] Memory policy: ECC disabled, Data cache writealloc
  11. <4>[ 0.000000] CPU EXYNOS5250 (id 0x43520210)
  12. <7>[ 0.000000] exynos5_init_clocks: initializing clocks
  13. <6>[ 0.000000] S3C24XX Clocks, Copyright 2004 Simtec Electronics
  14. <3>[ 0.000000] clkout: bad source 0
  15. <7>[ 0.000000] exynos5_setup_clocks: registering clocks
  16. <7>[ 0.000000] exynos5_setup_clocks: xtal is 24000000
  17. <6>[ 0.000000] EXYNOS5: PLL settings, A=1000000000, B=1333090909, C=333000000
  18. <6>[ 0.000000] M=1600000000, E=96000000, V=300000000, G=533000000
  19. <6>[ 0.000000] EXYNOS5: ARMCLK=1000000000, CDREX=800000000, ACLK400=533000000
  20. <6>[ 0.000000] ACLK333=333000000, ACLK266=266666666, ACLK200=200000000
  21. <6>[ 0.000000] ACLK166=166500000, ACLK66=66666666
  22. <6>[ 0.000000] sclk_fimd: source is ext_xtal (0), rate is 24000000
  23. <6>[ 0.000000] sclk_g3d: source is mout_mpll_user (0), rate is 800000000
  24. <6>[ 0.000000] sclk_gscl_wrap0: source is ext_xtal (0), rate is 24000000
  25. <6>[ 0.000000] sclk_gscl_wrap1: source is ext_xtal (0), rate is 24000000
  26. <6>[ 0.000000] sclk_bayer: source is ext_xtal (0), rate is 24000000
  27. <6>[ 0.000000] sclk_cam0: source is ext_xtal (0), rate is 24000000
  28. <6>[ 0.000000] sclk_cam1: source is ext_xtal (0), rate is 24000000
  29. <6>[ 0.000000] sclk_jpeg: source is ext_xtal (0), rate is 24000000
  30. <6>[ 0.000000] sclk_usbdrd30: source is mout_mpll (0), rate is 66666666
  31. <7>[ 0.000000] On node 0 totalpages: 524032
  32. <7>[ 0.000000] free_area_init_node: node 0, pgdat c09545c0, node_mem_map c0b27000
  33. <7>[ 0.000000] Normal zone: 992 pages used for memmap
  34. <7>[ 0.000000] Normal zone: 0 pages reserved
  35. <7>[ 0.000000] Normal zone: 125984 pages, LIFO batch:31
  36. <7>[ 0.000000] HighMem zone: 3102 pages used for memmap
  37. <7>[ 0.000000] HighMem zone: 393954 pages, LIFO batch:31
  38. <6>[ 0.000000] PERCPU: Embedded 6 pages/cpu @c1b34000 s11904 r0 d12672 u32768
  39. <7>[ 0.000000] pcpu-alloc: s11904 r0 d12672 u32768 alloc=8*4096
  40. <7>[ 0.000000] pcpu-alloc: [0] 0 [0] 1
  41. <4>[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 519938
  42. <5>[ 0.000000] Kernel command line: vmalloc=512M debug_core.break_on_panic=0 debug_core.break_on_exception=0 no_console_suspend s3c2410-wdt.tmr_atboot=1 s3c2410-wdt.tmr_margin=30 wire.search_count=5 s3cfb.bootloaderfb=0x60000000 androidboot.bootloader=MANTAMF01 androidboot.serialno=R32D10183KW androidboot.wifimacaddr=08:D4:2B:16:4F:50 androidboot.btmacaddr=08:D4:2B:16:4F:4F
  43. <6>[ 0.000000] PID hash table entries: 2048 (order: 1, 8192 bytes)
  44. <6>[ 0.000000] Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)
  45. <6>[ 0.000000] Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)
  46. <6>[ 0.000000] allocated 4192256 bytes of page_cgroup
  47. <6>[ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups
  48. <6>[ 0.000000] Memory: 2047MB = 2047MB total
  49. <5>[ 0.000000] Memory: 1123532k/1123532k available, 972596k reserved, 648576K highmem
  50. <5>[ 0.000000] Virtual kernel memory layout:
  51. <5>[ 0.000000] vector : 0xffff0000 - 0xffff1000 ( 4 kB)
  52. <5>[ 0.000000] fixmap : 0xfff00000 - 0xfffe0000 ( 896 kB)
  53. <5>[ 0.000000] vmalloc : 0xdf800000 - 0xff000000 ( 504 MB)
  54. <5>[ 0.000000] lowmem : 0xc0000000 - 0xdf000000 ( 496 MB)
  55. <5>[ 0.000000] pkmap : 0xbfe00000 - 0xc0000000 ( 2 MB)
  56. <5>[ 0.000000] .text : 0xc0008000 - 0xc0890000 (8736 kB)
  57. <5>[ 0.000000] .init : 0xc0890000 - 0xc08cbe80 ( 240 kB)
  58. <5>[ 0.000000] .data : 0xc08cc000 - 0xc0968188 ( 625 kB)
  59. <5>[ 0.000000] .bss : 0xc09681ac - 0xc0b263a0 (1785 kB)
  60. <6>[ 0.000000] SLUB: Genslabs=11, HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1
  61. <6>[ 0.000000] Preemptible hierarchical RCU implementation.
  62. <6>[ 0.000000] NR_IRQS:597
  63. <6>[ 0.000000] sched_clock: 32 bits at 24MHz, resolution 41ns, wraps every 178956ms
  64. <6>[ 0.000000] Console: colour dummy device 80x30
  65. <6>[ 0.000000] console [tty0] enabled
  66. <6>[ 0.000681] Calibrating delay loop... 997.78 BogoMIPS (lpj=2494464)
  67. <6>[ 0.030038] pid_max: default: 32768 minimum: 301
  68. <6>[ 0.030294] Mount-cache hash table entries: 512
  69. <6>[ 0.031001] Initializing cgroup subsys debug
  70. <6>[ 0.031025] Initializing cgroup subsys cpuacct
  71. <6>[ 0.031042] Initializing cgroup subsys memory
  72. <6>[ 0.031087] Initializing cgroup subsys devices
  73. <6>[ 0.031107] Initializing cgroup subsys freezer
  74. <6>[ 0.031125] Initializing cgroup subsys net_cls
  75. <6>[ 0.031142] Initializing cgroup subsys blkio
  76. <6>[ 0.031172] Initializing cgroup subsys perf_event
  77. <6>[ 0.031200] Initializing cgroup subsys net_prio
  78. <6>[ 0.031245] CPU: Testing write buffer coherency: ok
  79. <6>[ 0.031375] CPU0: thread -1, cpu 0, socket 0, mpidr 80000000
  80. <6>[ 0.031418] hw perfevents: enabled with ARMv7 Cortex-A15 PMU driver, 7 counters available
  81. <6>[ 0.031479] Setting up static identity map for 0x40698fc8 - 0x40699020
  82. <4>[ 0.094078] CPU1: Booted secondary processor
  83. <6>[ 0.121405] CPU1: thread -1, cpu 1, socket 0, mpidr 80000001
  84. <2>[ 0.121445] CPU1: Unknown IPI message 0x1
  85. <6>[ 0.121561] Brought up 2 CPUs
  86. <6>[ 0.121581] SMP: Total of 2 processors activated (1995.57 BogoMIPS).
  87. <6>[ 0.122133] devtmpfs: initialized
  88. <6>[ 0.132714] gpiochip_add: registered GPIOs 0 to 7 on device: GPA0
  89. <6>[ 0.132739] gpiochip_add: registered GPIOs 9 to 14 on device: GPA1
  90. <6>[ 0.132761] gpiochip_add: registered GPIOs 16 to 23 on device: GPA2
  91. <6>[ 0.132785] gpiochip_add: registered GPIOs 25 to 29 on device: GPB0
  92. <6>[ 0.132807] gpiochip_add: registered GPIOs 31 to 35 on device: GPB1
  93. <6>[ 0.132828] gpiochip_add: registered GPIOs 37 to 40 on device: GPB2
  94. <6>[ 0.132849] gpiochip_add: registered GPIOs 42 to 45 on device: GPB3
  95. <6>[ 0.132870] gpiochip_add: registered GPIOs 47 to 53 on device: GPC0
  96. <6>[ 0.132890] gpiochip_add: registered GPIOs 55 to 58 on device: GPC1
  97. <6>[ 0.132912] gpiochip_add: registered GPIOs 60 to 66 on device: GPC2
  98. <6>[ 0.132933] gpiochip_add: registered GPIOs 68 to 74 on device: GPC3
  99. <6>[ 0.132953] gpiochip_add: registered GPIOs 76 to 79 on device: GPD0
  100. <6>[ 0.132974] gpiochip_add: registered GPIOs 81 to 88 on device: GPD1
  101. <6>[ 0.132994] gpiochip_add: registered GPIOs 90 to 95 on device: GPY0
  102. <6>[ 0.133015] gpiochip_add: registered GPIOs 97 to 100 on device: GPY1
  103. <6>[ 0.133036] gpiochip_add: registered GPIOs 102 to 107 on device: GPY2
  104. <6>[ 0.133058] gpiochip_add: registered GPIOs 109 to 116 on device: GPY3
  105. <6>[ 0.133080] gpiochip_add: registered GPIOs 118 to 125 on device: GPY4
  106. <6>[ 0.133101] gpiochip_add: registered GPIOs 127 to 134 on device: GPY5
  107. <6>[ 0.133122] gpiochip_add: registered GPIOs 136 to 143 on device: GPY6
  108. <6>[ 0.133143] gpiochip_add: registered GPIOs 145 to 151 on device: GPC4
  109. <6>[ 0.133164] gpiochip_add: registered GPIOs 153 to 160 on device: GPX0
  110. <6>[ 0.133185] gpiochip_add: registered GPIOs 162 to 169 on device: GPX1
  111. <6>[ 0.133206] gpiochip_add: registered GPIOs 171 to 178 on device: GPX2
  112. <6>[ 0.133227] gpiochip_add: registered GPIOs 180 to 187 on device: GPX3
  113. <6>[ 0.133254] gpiochip_add: registered GPIOs 189 to 196 on device: GPE0
  114. <6>[ 0.133275] gpiochip_add: registered GPIOs 198 to 199 on device: GPE1
  115. <6>[ 0.133296] gpiochip_add: registered GPIOs 201 to 204 on device: GPF0
  116. <6>[ 0.133317] gpiochip_add: registered GPIOs 206 to 209 on device: GPF1
  117. <6>[ 0.133338] gpiochip_add: registered GPIOs 211 to 218 on device: GPG0
  118. <6>[ 0.133359] gpiochip_add: registered GPIOs 220 to 227 on device: GPG1
  119. <6>[ 0.133380] gpiochip_add: registered GPIOs 229 to 230 on device: GPG2
  120. <6>[ 0.133401] gpiochip_add: registered GPIOs 232 to 235 on device: GPH0
  121. <6>[ 0.133422] gpiochip_add: registered GPIOs 237 to 244 on device: GPH1
  122. <6>[ 0.133448] gpiochip_add: registered GPIOs 246 to 253 on device: GPV0
  123. <6>[ 0.133469] gpiochip_add: registered GPIOs 255 to 262 on device: GPV1
  124. <6>[ 0.133490] gpiochip_add: registered GPIOs 264 to 271 on device: GPV2
  125. <6>[ 0.133511] gpiochip_add: registered GPIOs 273 to 280 on device: GPV3
  126. <6>[ 0.133532] gpiochip_add: registered GPIOs 282 to 283 on device: GPV4
  127. <3>[ 0.133556] gpio: GPZ has no PM function
  128. <6>[ 0.133572] gpiochip_add: registered GPIOs 285 to 291 on device: GPZ
  129. <6>[ 0.133785] dummy:
  130. <6>[ 0.134014] NET: Registered protocol family 16
  131. <6>[ 0.134358] Registered FIQ tty driver
  132. <6>[ 0.134400] Last reset was system watchdog timer reset (RST_STAT=0x100000)
  133. <6>[ 0.136631] Manta HW revision: 8, CPU EXYNOS5250 Rev1.0
  134. <6>[ 0.140121] console [ttyFIQ2] enabled
  135. <6>[ 0.140276] Registered fiq debugger ttyFIQ2
  136. <6>[ 0.140573] persistent_ram: found existing buffer, size 39265, start 39265
  137. <6>[ 0.235351] console [ram-1] enabled
  138. <6>[ 0.237016] bootloader fb located at 60000000-60F9FFFF
  139. <6>[ 0.237101] Registered chained gpio int handler for interrupt 77.
  140. <6>[ 0.237246] Registered interrupt support for gpio group 19.
  141. <6>[ 0.239288] hw-breakpoint: found 5 (+1 reserved) breakpoint and 4 watchpoint registers.
  142. <6>[ 0.239425] hw-breakpoint: maximum watchpoint size is 8 bytes.
  143. <4>[ 0.239670] S3C Power Management, Copyright 2004 Simtec Electronics
  144. <6>[ 0.239959] EXYNOS5250 PMU Initialize
  145. <6>[ 0.240858] EXYNOS: Initializing architecture
  146. <6>[ 0.241273] s3c24xx-pwm s3c24xx-pwm.0: tin at 33333333, tdiv at 33333333, tin=divclk, base 0
  147. <6>[ 0.241497] s3c24xx-pwm s3c24xx-pwm.1: tin at 16666666, tdiv at 16666666, tin=divclk, base 8
  148. <6>[ 0.248870] bio: create slab <bio-0> at 0
  149. <6>[ 0.249311] MXT_BOOSTER:
  150. <6>[ 0.249494] MXT_XVDD:
  151. <6>[ 0.249570] MXT_XVDD: supplied by MXT_BOOSTER
  152. <6>[ 0.249846] VBATT: 3700 mV
  153. <6>[ 0.642991] ion_chunk_heap_create: base 2415919104 size 268435456 align 1048576
  154. <5>[ 0.644928] SCSI subsystem initialized
  155. <6>[ 0.645786] usbcore: registered new interface driver usbfs
  156. <6>[ 0.645909] usbcore: registered new interface driver hub
  157. <6>[ 0.646103] usbcore: registered new device driver usb
  158. <6>[ 0.646366] wake enabled for irq 439
  159. <6>[ 0.646561] wake enabled for irq 432
  160. <6>[ 0.646681] wake enabled for irq 433
  161. <6>[ 0.646754] GPIO Input Driver: Start gpio inputs for manta-keypad... in interrupt mode
  162. <6>[ 0.646939] wake enabled for irq 427
  163. <6>[ 0.647012] GPIO Input Driver: Start gpio inputs for manta-keypad... in interrupt mode
  164. <6>[ 0.647269] input: manta-keypad as /devices/virtual/input/input0
  165. <6>[ 0.647459] input: manta-switch as /devices/virtual/input/input1
  166. <6>[ 0.648048] s3c-i2c s3c2440-i2c.0: i2c-0: S3C I2C adapter
  167. <6>[ 0.648128] s3c-i2c s3c2440-i2c.0: slave address 0x10
  168. <6>[ 0.648251] s3c-i2c s3c2440-i2c.0: bus frequency set to 65 KHz
  169. <6>[ 0.648612] s3c-i2c s3c2440-i2c.1: i2c-1: S3C I2C adapter
  170. <6>[ 0.648739] s3c-i2c s3c2440-i2c.1: slave address 0x10
  171. <6>[ 0.648814] s3c-i2c s3c2440-i2c.1: bus frequency set to 378 KHz
  172. <6>[ 0.649222] s3c-i2c s3c2440-i2c.2: i2c-2: S3C I2C adapter
  173. <6>[ 0.649300] s3c-i2c s3c2440-i2c.2: slave address 0x10
  174. <6>[ 0.649422] s3c-i2c s3c2440-i2c.2: bus frequency set to 378 KHz
  175. <6>[ 0.649677] s3c-i2c s3c2440-i2c.3: i2c-3: S3C I2C adapter
  176. <6>[ 0.649804] s3c-i2c s3c2440-i2c.3: slave address 0x10
  177. <6>[ 0.649878] s3c-i2c s3c2440-i2c.3: bus frequency set to 378 KHz
  178. <6>[ 0.650232] s3c-i2c s3c2440-i2c.4: i2c-4: S3C I2C adapter
  179. <6>[ 0.650311] s3c-i2c s3c2440-i2c.4: slave address 0x10
  180. <6>[ 0.650432] s3c-i2c s3c2440-i2c.4: bus frequency set to 378 KHz
  181. <6>[ 0.650841] max77686 5-0009: device found
  182. <6>[ 0.657741] max77686_pmic_probe: Device ID=0x09, (version:1, chip_rev:1)
  183. <6>[ 0.657970] max77686-pmic max77686-pmic: Power on triggered by PWRON=High
  184. <6>[ 0.658100] max77686-pmic max77686-pmic: Power on triggered by Manual Reset Event
  185. <6>[ 0.661274] vdd_mif range: 850 <--> 1200 mV at 987 mV
  186. <6>[ 0.662073] vdd_arm range: 850 <--> 1500 mV at 1075 mV
  187. <6>[ 0.662806] vdd_int range: 850 <--> 1300 mV at 1037 mV
  188. <6>[ 0.663603] vdd_g3d range: 850 <--> 1250 mV at 1200 mV
  189. <6>[ 0.664584] VCC_1.8V_AP: 1800 mV
  190. <6>[ 0.665634] VMIPI_1.0V: 1000 mV
  191. <6>[ 0.666348] TOUCH_VDD_1.8V: 1800 mV
  192. <6>[ 0.667341] VMIPI_1.8V: 1800 mV
  193. <6>[ 0.668306] VUOTG_3.0V: 3000 mV
  194. <6>[ 0.669321] VHSIC_1.0V: 1000 mV
  195. <6>[ 0.670295] VHSIC_1.8V: 1800 mV
  196. <6>[ 0.671007] 5M_CORE_1.5V: 1500 mV
  197. <6>[ 0.671772] CAM_IO_1.8V: 1800 mV
  198. <6>[ 0.672487] VT_CAM_1.8V: 1800 mV
  199. <6>[ 0.673207] TA_CHECK_1.35V: 1350 mV
  200. <6>[ 0.673921] TSP_AVDD_2.8V: 2800 mV
  201. <6>[ 0.674688] CAM_AF_2.8V: 2800 mV
  202. <6>[ 0.675668] VADC_3.3V: 3300 mV
  203. <6>[ 0.676248] 32KHZ_PMIC:
  204. <6>[ 0.676529] s3c-i2c s3c2440-i2c.5: i2c-5: S3C I2C adapter
  205. <6>[ 0.676608] s3c-i2c s3c2440-i2c.5: slave address 0x10
  206. <6>[ 0.676683] s3c-i2c s3c2440-i2c.5: bus frequency set to 378 KHz
  207. <6>[ 0.677005] s3c-i2c s3c2440-i2c.7: i2c-7: S3C I2C adapter
  208. <6>[ 0.677084] s3c-i2c s3c2440-i2c.7: slave address 0x10
  209. <6>[ 0.677209] s3c-i2c s3c2440-i2c.7: bus frequency set to 378 KHz
  210. <6>[ 0.677420] s3c-i2c s3c2440-i2c.8: i2c-8: S3C I2C adapter
  211. <6>[ 0.677547] s3c-i2c s3c2440-i2c.8: slave address 0x10
  212. <6>[ 0.677623] s3c-i2c s3c2440-i2c.8: bus frequency set to 378 KHz
  213. <6>[ 0.677805] Linux media interface: v0.10
  214. <6>[ 0.677916] Linux video capture interface: v2.00
  215. <6>[ 0.679362] Advanced Linux Sound Architecture Driver Version 1.0.25.
  216. <6>[ 0.679821] Bluetooth: Core ver 2.16
  217. <6>[ 0.679924] NET: Registered protocol family 31
  218. <6>[ 0.680047] Bluetooth: HCI device and connection manager initialized
  219. <6>[ 0.680125] Bluetooth: HCI socket layer initialized
  220. <6>[ 0.680247] Bluetooth: L2CAP socket layer initialized
  221. <6>[ 0.680335] Bluetooth: SCO socket layer initialized
  222. <6>[ 0.680734] cfg80211: Calling CRDA to update world regulatory domain
  223. <6>[ 0.681093] wake enabled for irq 421
  224. <6>[ 0.681282] wake enabled for irq 422
  225. <6>[ 0.681697] Switching to clocksource mct-frc
  226. <6>[ 0.704156] NET: Registered protocol family 2
  227. <6>[ 0.704454] IP route cache hash table entries: 16384 (order: 4, 65536 bytes)
  228. <6>[ 0.704900] TCP established hash table entries: 65536 (order: 7, 524288 bytes)
  229. <6>[ 0.706015] TCP bind hash table entries: 65536 (order: 7, 786432 bytes)
  230. <6>[ 0.707234] TCP: Hash tables configured (established 65536 bind 65536)
  231. <6>[ 0.707314] TCP: reno registered
  232. <6>[ 0.707389] UDP hash table entries: 256 (order: 1, 8192 bytes)
  233. <6>[ 0.707526] UDP-Lite hash table entries: 256 (order: 1, 8192 bytes)
  234. <6>[ 0.707786] NET: Registered protocol family 1
  235. <6>[ 0.708072] Trying to unpack rootfs image as initramfs...
  236. <6>[ 0.726795] Freeing initrd memory: 484K
  237. <6>[ 0.727806] Exynos5 : ARM Clock down on idle mode is enabled
  238. <6>[ 0.727926] EXYNOS5250 ASV(ARM : 8 MIF : 3) using fused group
  239. <6>[ 0.728358] [BT] bcm_bt_lpm_init
  240. <6>[ 0.728605] wake enabled for irq 438
  241. <6>[ 0.729049] exynos_tmu exynos_tmu: Current auto refresh interval(3875 nsec), Normal auto refresh interval(3875 nsec), memory throttle auto refresh internal(1937 nsec)
  242. <6>[ 0.730276] exynos_tmu exynos_tmu: Tmu Initialization is sucessful...!
  243. <3>[ 0.730465] s3c-adc samsung-adc-v4: operating without regulator "vdd" .
  244. <6>[ 0.730650] s3c-adc samsung-adc-v4: attached adc driver
  245. <4>[ 0.731959] highmem bounce pool size: 64 pages
  246. <6>[ 0.738130] NTFS driver 2.1.30 [Flags: R/O].
  247. <6>[ 0.738459] fuse init (API version 7.18)
  248. <6>[ 0.738760] msgmni has been set to 928
  249. <6>[ 0.740104] io scheduler noop registered
  250. <6>[ 0.740184] io scheduler deadline registered
  251. <6>[ 0.740269] io scheduler row registered
  252. <6>[ 0.740515] io scheduler cfq registered (default)
  253. <6>[ 0.943133] dma-pl330 dma-pl330.0: Loaded driver for PL330 DMAC-267056
  254. <6>[ 0.943268] dma-pl330 dma-pl330.0: DBUFF-32x4bytes Num_Chans-8 Num_Peri-32 Num_Events-32
  255. <6>[ 0.945404] dma-pl330 dma-pl330.1: Loaded driver for PL330 DMAC-267056
  256. <6>[ 0.945539] dma-pl330 dma-pl330.1: DBUFF-32x4bytes Num_Chans-8 Num_Peri-32 Num_Events-32
  257. <6>[ 0.946266] dma-pl330 dma-pl330.2: Loaded driver for PL330 DMAC-267056
  258. <6>[ 0.946350] dma-pl330 dma-pl330.2: DBUFF-64x8bytes Num_Chans-8 Num_Peri-1 Num_Events-32
  259. <6>[ 0.946666] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
  260. <6>[ 0.947709] exynos4210-uart.0: ttySAC0 at MMIO 0x12c00000 (irq = 83) is a S3C6400/10
  261. <6>[ 0.947979] exynos4210-uart.1: ttySAC1 at MMIO 0x12c10000 (irq = 84) is a S3C6400/10
  262. <6>[ 0.948288] exynos4210-uart.3: ttySAC3 at MMIO 0x12c30000 (irq = 86) is a S3C6400/10
  263. <6>[ 0.949937] mali mali.0: Probed as mali0
  264. <4>[ 0.950091] mali mali.0: start latency exceeded, new value 916 ns
  265. <4>[ 0.950979] mali mali.0: state restore latency exceeded, new value 756666 ns
  266. <4>[ 0.951062] mali mali.0: stop latency exceeded, new value 958 ns
  267. <6>[ 0.957024] brd: module loaded
  268. <6>[ 0.960039] loop: module loaded
  269. <6>[ 0.960851] WM1811 LDO1:
  270. <6>[ 0.961341] WM1811 LDO2:
  271. <6>[ 0.965823] wm8994 7-001a: WM1811 revision D CUST_ID 00
  272. <6>[ 0.969629] bcm2079x-spi spi2.0: bcmspinfc_probe, probing bcmspinfc driver
  273. <6>[ 0.969915] bcm2079x-spi spi2.0: requesting IRQ 430
  274. <6>[ 0.970048] bcm2079x-spi spi2.0: bcmspinfc_probe, probing bcmspinfc driver exited successfully
  275. <6>[ 0.970332] tun: Universal TUN/TAP device driver, 1.6
  276. <6>[ 0.970410] tun: (C) 1999-2004 Max Krasnyansky <[email protected]>
  277. <6>[ 0.970676] PPP generic driver version 2.4.2
  278. <6>[ 0.970889] PPP BSD Compression module registered
  279. <6>[ 0.971013] PPP Deflate Compression module registered
  280. <6>[ 0.971283] PPP MPPE Compression module registered
  281. <6>[ 0.971412] NET: Registered protocol family 24
  282. <6>[ 0.971522] usbcore: registered new interface driver asix
  283. <6>[ 0.971624] usbcore: registered new interface driver cdc_ether
  284. <6>[ 0.971775] usbcore: registered new interface driver net1080
  285. <6>[ 0.971908] usbcore: registered new interface driver cdc_subset
  286. <6>[ 0.972064] usbcore: registered new interface driver zaurus
  287. <6>[ 0.972178] usbcore: registered new interface driver cdc_ncm
  288. <6>[ 0.972468] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
  289. <6>[ 0.972847] s5p-ehci s5p-ehci: S5P EHCI Host Controller
  290. <6>[ 0.973075] s5p-ehci s5p-ehci: new USB bus registered, assigned bus number 1
  291. <6>[ 0.973254] s5p-ehci s5p-ehci: irq 103, io mem 0x12110000
  292. <6>[ 0.981842] s5p-ehci s5p-ehci: USB 0.0 started, EHCI 1.00
  293. <6>[ 0.982034] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
  294. <6>[ 0.982117] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
  295. <6>[ 0.982246] usb usb1: Product: S5P EHCI Host Controller
  296. <6>[ 0.982321] usb usb1: Manufacturer: Linux 3.4.67-cyanogenmod-g200870d-dirty ehci_hcd
  297. <6>[ 0.982452] usb usb1: SerialNumber: s5p-ehci
  298. <6>[ 0.982922] hub 1-0:1.0: USB hub found
  299. <6>[ 0.983055] hub 1-0:1.0: 3 ports detected
  300. <6>[ 0.983394] s5p-ehci s5p-ehci: remove, state 1
  301. <6>[ 0.983476] usb usb1: USB disconnect, device number 1
  302. <6>[ 0.984390] s5p-ehci s5p-ehci: USB bus 1 deregistered
  303. <6>[ 0.984707] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
  304. <6>[ 0.985039] exynos-ohci exynos-ohci: EXYNOS OHCI Host Controller
  305. <6>[ 0.985267] exynos-ohci exynos-ohci: new USB bus registered, assigned bus number 1
  306. <6>[ 0.985430] exynos-ohci exynos-ohci: irq 103, io mem 0x12120000
  307. <6>[ 1.040915] usb usb1: New USB device found, idVendor=1d6b, idProduct=0001
  308. <6>[ 1.040996] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
  309. <6>[ 1.041123] usb usb1: Product: EXYNOS OHCI Host Controller
  310. <6>[ 1.041198] usb usb1: Manufacturer: Linux 3.4.67-cyanogenmod-g200870d-dirty ohci_hcd
  311. <6>[ 1.041326] usb usb1: SerialNumber: exynos-ohci
  312. <6>[ 1.041793] hub 1-0:1.0: USB hub found
  313. <6>[ 1.041949] hub 1-0:1.0: 3 ports detected
  314. <6>[ 1.042271] exynos-ohci exynos-ohci: remove, state 1
  315. <6>[ 1.042401] usb usb1: USB disconnect, device number 1
  316. <6>[ 1.043025] exynos-ohci exynos-ohci: USB bus 1 deregistered
  317. <6>[ 1.043350] usbcore: registered new interface driver usblp
  318. <6>[ 1.043477] Initializing USB Mass Storage driver...
  319. <6>[ 1.043580] usbcore: registered new interface driver usb-storage
  320. <6>[ 1.043704] USB Mass Storage support registered.
  321. <6>[ 1.043806] usbcore: registered new interface driver libusual
  322. <6>[ 1.043998] usbcore: registered new interface driver usbserial
  323. <6>[ 1.044074] usbserial: USB Serial Driver core
  324. <6>[ 1.044461] s3c-hsotg : S3C HS USB OTG Device Driver,(c) 2008-2009 Samsung Electronics
  325. <6>[ 1.044467] s3c-hsotg : version 15 March 2009
  326. <6>[ 1.044805] file system registered
  327. <6>[ 1.045880] gadget: Mass Storage Function, version: 2009/09/11
  328. <6>[ 1.046011] gadget: Number of LUNs=1
  329. <6>[ 1.046085] lun0: LUN: removable file: (no medium)
  330. <6>[ 1.046367] gadget: android_usb ready
  331. <6>[ 1.046492] bound driver 'android_usb'
  332. <6>[ 1.046789] mousedev: PS/2 mouse device common for all mice
  333. <6>[ 1.047222] usbcore: registered new interface driver xpad
  334. <6>[ 1.047331] usbcore: registered new interface driver usb_acecad
  335. <6>[ 1.047481] usbcore: registered new interface driver aiptek
  336. <6>[ 1.047580] usbcore: registered new interface driver gtco
  337. <6>[ 1.047680] usbcore: registered new interface driver hanwang
  338. <6>[ 1.047781] usbcore: registered new interface driver kbtab
  339. <6>[ 1.047878] usbcore: registered new interface driver wacom
  340. <6>[ 1.048377] input: Atmel maXTouch Touchscreen as /devices/platform/s3c2440-i2c.3/i2c-3/3-004a/input/input2
  341. <4>[ 1.056957] mali mali.0: state save latency exceeded, new value 8042 ns
  342. <4>[ 1.057315] pd-g3d: Power-off latency exceeded, new value 269292 ns
  343. <6>[ 1.157414] max77686-rtc max77686-rtc: max77686_rtc_enable_wtsr_smpl: WTSR: enable, SMPL: enable
  344. <6>[ 1.257382] max77686-rtc max77686-rtc: rtc core: registered max77686-rtc as rtc0
  345. <6>[ 1.257939] i2c /dev entries driver
  346. <6>[ 1.259068] gspca_main: v2.14.0 registered
  347. <6>[ 1.259308] exynos-mdev.0: Media0[0xde1f4400] was registered successfully
  348. <6>[ 1.259566] exynos-mdev.1: Media1[0xde1f4800] was registered successfully
  349. <6>[ 1.259781] exynos-mdev.2: Media2[0xde1f4c00] was registered successfully
  350. <6>[ 1.260598] [INFO]gsc_probe:1427: gsc-0 registered successfully
  351. <6>[ 1.261216] [INFO]gsc_probe:1427: gsc-1 registered successfully
  352. <6>[ 1.261915] [INFO]gsc_probe:1427: gsc-2 registered successfully
  353. <6>[ 1.262534] [INFO]gsc_probe:1427: gsc-3 registered successfully
  354. <2>[ 1.262716] Initialize JPEG driver
  355. <6>[ 1.263013] s5p-jpeg s5p-jpeg: JPEG driver is registered to /dev/video12
  356. <6>[ 1.263258] s5p-jpeg s5p-jpeg: JPEG driver is registered to /dev/video11
  357. <6>[ 1.263693] Samsung Graphics 2D driver, (c) 2011 Samsung Electronics
  358. <6>[ 1.263865] EXYNOS MFC V4L2 Driver, (c) 2010 Samsung Electronics
  359. <7>[ 1.264040] s5p_mfc_probe++
  360. <7>[ 1.264050] s5p-mfc s5p-mfc: Initialised spin lock
  361. <7>[ 1.264059] s5p-mfc s5p-mfc: Getting clocks
  362. <6>[ 1.264356] s5p-mfc s5p-mfc: decoder registered as /dev/video6
  363. <6>[ 1.264561] s5p-mfc s5p-mfc: encoder registered as /dev/video7
  364. <7>[ 1.264981] s5p_mfc_probe--
  365. <6>[ 1.265117] i2c i2c-0: attached exynos hdcp into i2c adapter successfully
  366. <4>[ 1.265229] i2c-core: driver [exynos_hdcp] using legacy suspend method
  367. <4>[ 1.265356] i2c-core: driver [exynos_hdcp] using legacy resume method
  368. <6>[ 1.265443] Samsung HDMI output driver, (c) 2010-2011 Samsung Electronics Co., Ltd.
  369. <6>[ 1.265712] s5p-hdmi exynos5-hdmi: hdmiphy i2c bus number = 8
  370. <6>[ 1.265918] s5p-hdmiphy 8-0038: hdmiphy_probe start
  371. <6>[ 1.265996] s5p-hdmiphy 8-0038: probe successful
  372. <6>[ 1.291583] s5p-hdmi exynos5-hdmi: probe sucessful
  373. <6>[ 1.291847] i2c i2c-0: probed exynos edid
  374. <6>[ 1.291967] Samsung TV Mixer driver, (c) 2010-2011 Samsung Electronics Co., Ltd.
  375. <6>[ 1.292140] s5p-mixer s5p-mixer: probe start
  376. <6>[ 1.292370] s5p-mixer s5p-mixer: resources acquired
  377. <6>[ 1.292511] s5p-mixer s5p-mixer: added output 'S5P HDMI connector' from module 's5p-hdmi'
  378. <6>[ 1.292763] s5p-mixer s5p-mixer: registered layer mxr0_graph0 as /dev/video16
  379. <6>[ 1.293031] s5p-mixer s5p-mixer: registered layer mxr0_graph1 as /dev/video17
  380. <6>[ 1.293298] s5p-mixer s5p-mixer: registered layer mxr1_graph2 as /dev/video18
  381. <6>[ 1.293524] s5p-mixer s5p-mixer: registered layer mxr1_graph3 as /dev/video19
  382. <6>[ 1.293654] s5p-mixer s5p-mixer: mixer0 create links
  383. <6>[ 1.293741] s5p-mixer s5p-mixer: mixer1 create links
  384. <6>[ 1.293872] s5p-mixer s5p-mixer: mixer links are created successfully
  385. <6>[ 1.293962] s5p-mixer s5p-mixer: probe successful
  386. <6>[ 1.295562] fimc_is_spi successfully probed
  387. <6>[ 1.295662] Driver for 1-wire Dallas network protocol.
  388. <6>[ 1.364622] wake enabled for irq 420
  389. <6>[ 1.364998] s3c2410_wdt: S3C2410 Watchdog Timer, (c) 2004 Simtec Electronics
  390. <6>[ 1.365315] s3c2410-wdt s3c2410-wdt: starting watchdog timer
  391. <6>[ 1.365460] s3c2410-wdt s3c2410-wdt: watchdog active, reset enabled, irq disabled
  392. <6>[ 1.366034] device-mapper: uevent: version 1.0.3
  393. <6>[ 1.366501] device-mapper: ioctl: 4.22.0-ioctl (2011-10-19) initialised: [email protected]
  394. <6>[ 1.366751] Bluetooth: HCI UART driver ver 2.2
  395. <6>[ 1.366854] Bluetooth: HCI H4 protocol initialized
  396. <6>[ 1.367075] cpuidle: using governor ladder
  397. <6>[ 1.367280] cpuidle: using governor menu
  398. <6>[ 1.367379] sdhci: Secure Digital Host Controller Interface driver
  399. <6>[ 1.367503] sdhci: Copyright(c) Pierre Ossman
  400. <6>[ 1.367665] Synopsys Designware Multimedia Card Interface Driver
  401. <6>[ 1.367874] dw_mmc dw_mmc.0: Using internal DMA controller.
  402. <6>[ 1.368143] mmc0: no vmmc regulator found
  403. <6>[ 1.369435] dw_mmc dw_mmc.0: Version ID is 241a
  404. <6>[ 1.369515] dw_mmc dw_mmc.0: DW MMC controller at irq 107, 32 bit host data width, 128 deep fifo
  405. <6>[ 1.369726] dw_mmc dw_mmc.1: Using internal DMA controller.
  406. <6>[ 1.369967] mmc1: no vmmc regulator found
  407. <6>[ 1.371261] dw_mmc dw_mmc.1: Version ID is 241a
  408. <6>[ 1.371338] dw_mmc dw_mmc.1: DW MMC controller at irq 108, 32 bit host data width, 128 deep fifo
  409. <6>[ 1.371468] dw_mmc dw_mmc.1: Internal DMAC interrupt fix enabled.
  410. <7>[ 1.376532] Registered led device: as3668
  411. <6>[ 1.380914] usbcore: registered new interface driver usbhid
  412. <6>[ 1.381095] usbhid: USB HID core driver
  413. <4>[ 1.396864] mmc_host mmc0: device is being hw reset
  414. <6>[ 1.556891] mmc_host mmc0: Bus speed (slot 0) = 50000000Hz (slot req 400000Hz, actual 396825HZ div = 63)
  415. <6>[ 1.612133] mmc_host mmc0: Bus speed (slot 0) = 200000000Hz (slot req 200000000Hz, actual 200000000HZ div = 0)
  416. <3>[ 1.612311] dw_mmc dw_mmc.0: cmd21 data error:-84 pending:184 status:a906 tcb:80 tbb:0
  417. <6>[ 1.612862] mmc0: new HS200 MMC card at address 0001
  418. <6>[ 1.613315] mmcblk0: mmc0:0001 MAG2GA 14.6 GiB
  419. <6>[ 1.613638] mmcblk0boot0: mmc0:0001 MAG2GA partition 1 4.00 MiB
  420. <6>[ 1.613902] mmcblk0boot1: mmc0:0001 MAG2GA partition 2 4.00 MiB
  421. <6>[ 1.617697] mmcblk0: p1 p2 p3 p4 p5 p6 p7 p8 p9
  422. <6>[ 1.619958] mmcblk0boot1: unknown partition table
  423. <6>[ 1.620799] mmcblk0boot0: unknown partition table
  424. <6>[ 1.732651] i2c i2c-1: MPU6050 is ready to go!
  425. <6>[ 1.732971] bh1721fvc_i2c_probe: registering lightsensor-level input device
  426. <6>[ 1.734855] zram: Created 1 device(s) ...
  427. <6>[ 1.735545] ashmem: initialized
  428. <6>[ 1.735746] logger: created 256K log 'log_main'
  429. <6>[ 1.735947] logger: created 256K log 'log_events'
  430. <6>[ 1.736194] logger: created 256K log 'log_radio'
  431. <6>[ 1.736391] logger: created 256K log 'log_system'
  432. <6>[ 1.736698] Mobicore API module initialized!
  433. <6>[ 1.737675] usbcore: registered new interface driver snd-usb-audio
  434. <4>[ 1.738930] samsung-i2s samsung-i2s.0: start latency exceeded, new value 917 ns
  435. <4>[ 1.739070] samsung-i2s samsung-i2s.0: state restore latency exceeded, new value 1042 ns
  436. <4>[ 1.739203] samsung-i2s samsung-i2s.0: stop latency exceeded, new value 917 ns
  437. <4>[ 1.739381] samsung-i2s samsung-i2s.0: state save latency exceeded, new value 959 ns
  438. <4>[ 1.739675] pd-maudio: Power-off latency exceeded, new value 158375 ns
  439. <4>[ 1.747313] pd-maudio: Power-on latency exceeded, new value 150917 ns
  440. <6>[ 1.750580] asoc: wm8994-aif1 <-> samsung-i2s.0 mapping ok
  441. <6>[ 1.750993] asoc: wm8994-aif1 <-> samsung-i2s.4 mapping ok
  442. <6>[ 1.751323] asoc: wm8994-aif2 <-> manta-voice mapping ok
  443. <6>[ 1.751708] asoc: wm8994-aif3 <-> manta-bt mapping ok
  444. <6>[ 1.776656] input: Manta-I2S Headset as /devices/platform/manta-i2s/sound/card0/input3
  445. <6>[ 1.778767] asoc: dit-hifi <-> samsung-spdif mapping ok
  446. <6>[ 1.779473] GACT probability NOT on
  447. <6>[ 1.779599] Mirror/redirect action on
  448. <6>[ 1.779673] u32 classifier
  449. <6>[ 1.779742] Actions configured
  450. <6>[ 1.779815] Netfilter messages via NETLINK v0.30.
  451. <6>[ 1.779945] nfnl_acct: registering with nfnetlink.
  452. <6>[ 1.780052] nf_conntrack version 0.5.0 (16384 buckets, 65536 max)
  453. <6>[ 1.780581] ctnetlink v0.93: registering with nfnetlink.
  454. <6>[ 1.780693] NF_TPROXY: Transparent proxy support initialized, version 4.1.0
  455. <6>[ 1.780821] NF_TPROXY: Copyright (c) 2006-2007 BalaBit IT Ltd.
  456. <6>[ 1.781212] xt_time: kernel timezone is -0000
  457. <6>[ 1.781661] ip_tables: (C) 2000-2006 Netfilter Core Team
  458. <6>[ 1.781918] arp_tables: (C) 2002 David S. Miller
  459. <6>[ 1.782082] TCP: cubic registered
  460. <6>[ 1.782153] Initializing XFRM netlink socket
  461. <6>[ 1.782641] NET: Registered protocol family 10
  462. <6>[ 1.783419] Mobile IPv6
  463. <6>[ 1.783517] ip6_tables: (C) 2000-2006 Netfilter Core Team
  464. <6>[ 1.783713] IPv6 over IPv4 tunneling driver
  465. <6>[ 1.784662] NET: Registered protocol family 17
  466. <6>[ 1.784761] NET: Registered protocol family 15
  467. <5>[ 1.784941] Bridge firewalling registered
  468. <6>[ 1.785164] Bluetooth: RFCOMM TTY layer initialized
  469. <6>[ 1.785257] Bluetooth: RFCOMM socket layer initialized
  470. <6>[ 1.785381] Bluetooth: RFCOMM ver 1.11
  471. <6>[ 1.785454] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
  472. <6>[ 1.785577] Bluetooth: HIDP (Human Interface Emulation) ver 1.2
  473. <6>[ 1.785716] NET: Registered protocol family 35
  474. <6>[ 1.786141] VFP support v0.3: implementor 41 architecture 4 part 30 variant f rev 0
  475. <5>[ 1.786350] Registering SWP/SWPB emulation handler
  476. <4>[ 1.786540] pd-gscl3: Power-off latency exceeded, new value 833 ns
  477. <4>[ 1.786651] pd-isp: Power-off latency exceeded, new value 140916 ns
  478. <4>[ 1.786824] pd-gscl2: Power-off latency exceeded, new value 792 ns
  479. <4>[ 1.786922] pd-gscl1: Power-off latency exceeded, new value 667 ns
  480. <4>[ 1.787065] pd-gscl0: Power-off latency exceeded, new value 666 ns
  481. <4>[ 1.787207] pd-dp: Power-off latency exceeded, new value 708 ns
  482. <4>[ 1.787364] pd-gscl: Power-off latency exceeded, new value 217500 ns
  483. <4>[ 1.787461] pd-mixer: Power-off latency exceeded, new value 709 ns
  484. <4>[ 1.787603] pd-hdmi: Power-off latency exceeded, new value 708 ns
  485. <4>[ 1.787698] pd-fimd1: Power-off latency exceeded, new value 750 ns
  486. <4>[ 1.787987] pd-disp1: Power-off latency exceeded, new value 158791 ns
  487. <4>[ 1.788143] pd-mfc: Power-off latency exceeded, new value 247625 ns
  488. <6>[ 1.794166] wake enabled for irq 424
  489. <6>[ 1.794536] wake enabled for irq 426
  490. <4>[ 1.803111] pd-disp1: Power-on latency exceeded, new value 188375 ns
  491. <4>[ 1.803202] pd-fimd1: Power-on latency exceeded, new value 875 ns
  492. <4>[ 1.803332] s3c-fb exynos5-fb.1: start latency exceeded, new value 916 ns
  493. <4>[ 1.803422] s3c-fb exynos5-fb.1: state restore latency exceeded, new value 10584 ns
  494. <4>[ 1.803556] s3c-fb exynos5-fb.1: stop latency exceeded, new value 917 ns
  495. <6>[ 1.837179] s3c-fb exynos5-fb.1: window 0: fb
  496. <4>[ 1.837583] pd-dp: Power-on latency exceeded, new value 959 ns
  497. <4>[ 1.837718] s5p-dp s5p-dp: start latency exceeded, new value 875 ns
  498. <4>[ 1.837799] s5p-dp s5p-dp: state restore latency exceeded, new value 958 ns
  499. <4>[ 1.837926] s5p-dp s5p-dp: stop latency exceeded, new value 917 ns
  500. <6>[ 1.839513] s5p-dp s5p-dp: EDID data does not include any extensions.
  501. <3>[ 1.852004] s5p-dp s5p-dp: EDID Read success!
  502. <6>[ 1.864500] s5p-dp s5p-dp: Link Training Clock Recovery success
  503. <6>[ 1.881007] s5p-dp s5p-dp: Link Training success!
  504. <4>[ 2.030254] wifi_set_power = 1
  505. <4>[ 2.386869] wifi_set_carddetect = 1
  506. <6>[ 2.416868] mmc_host mmc1: Bus speed (slot 0) = 50000000Hz (slot req 400000Hz, actual 396825HZ div = 63)
  507. <6>[ 2.433028] mmc_host mmc1: Bus speed (slot 0) = 200000000Hz (slot req 200000000Hz, actual 200000000HZ div = 0)
  508. <6>[ 2.435689] mmc1: new ultra high speed SDR104 SDIO card at address 0001
  509. <4>[ 2.439750] F1 signature OK, socitype:0x1 chip:0x4324 rev:0x2 pkg:0xd
  510. <4>[ 2.440398] DHD: dongle ram size is set to 589824(orig 589824) at 0x0
  511. <4>[ 2.441475] wl_create_event_handler(): thread:wl_event_handler:62 started
  512. <6>[ 2.441498] CFG80211-ERROR) wl_event_handler : tsk Enter, tsk = 0xddc813d8
  513. <4>[ 2.442349] p2p0: P2P Interface Registered
  514. <4>[ 2.442523] dhd_attach(): thread:dhd_watchdog_thread:63 started
  515. <4>[ 2.442693] dhd_attach(): thread:dhd_dpc:64 started
  516. <4>[ 2.442913] dhd_attach(): thread:dhd_rxf:65 started
  517. <4>[ 2.443072] dhd_attach(): thread:dhd_sysioc:66 started
  518. <4>[ 2.443315] wifi_get_mac_addr
  519. <4>[ 2.443795] Broadcom Dongle Host Driver: register interface [wlan0] MAC: 08:d4:2b:16:4f:50
  520. <4>[ 2.443972]
  521. <4>[ 2.443975] Dongle Host Driver, version 1.88.45 (r)
  522. <4>[ 2.443979] Compiled in drivers/net/wireless/bcmdhd on Mar 2 2018 at 06:53:14
  523. <4>[ 2.444238] wifi_set_power = 0
  524. <4>[ 2.552074] =========== WLAN placed in RESET ========
  525. <6>[ 2.577509] max77686-rtc max77686-rtc: setting system clock to 2018-03-02 10:14:37 UTC (1519985677)
  526. <6>[ 2.580089] ALSA device list:
  527. <6>[ 2.580234] #0: Manta-I2S
  528. <6>[ 2.580316] #1: Manta-SPDIF
  529. <6>[ 2.580701] Freeing init memory: 236K
  530. <6>[ 2.580788] Write protecting the kernel text section c0008000 - c0890000
  531. <6>[ 2.581269] rodata_test: attempting to write to read-only section:
  532. <6>[ 2.581415] write to read-only section trapped, success
  533. <6>[ 3.211191] battery: charge source type was changed: usb
  534. <6>[ 4.738866] manta_otg manta_otg_work: UNDEFINED -> b_peripheral
  535. <3>[ 5.283404] android_usb: already disabled
  536. <6>[ 5.550629] android_work: sent uevent USB_STATE=CONNECTED
  537. <6>[ 5.790940] android_work: sent uevent USB_STATE=DISCONNECTED
  538. <6>[ 5.797737] rndis_function_bind_config MAC: 00:00:00:00:00:00
  539. <4>[ 5.798467] android_usb gadget: using random self ethernet address
  540. <4>[ 5.798857] android_usb gadget: using random host ethernet address
  541. <6>[ 5.801594] rndis0: MAC 96:6e:b0:bf:52:de
  542. <6>[ 5.802092] rndis0: HOST MAC 8a:a5:1a:17:38:be
  543. <6>[ 5.810521] ADDRCONF(NETDEV_UP): rndis0: link is not ready
  544. <6>[ 6.152655] android_work: sent uevent USB_STATE=CONNECTED
  545. <6>[ 6.352054] android_usb gadget: high-speed config #1: android
  546. <6>[ 6.353740] ADDRCONF(NETDEV_CHANGE): rndis0: link becomes ready
  547. <6>[ 6.355385] android_work: sent uevent USB_STATE=CONFIGURED
  548. <7>[ 16.827429] rndis0: no IPv6 routers present
  549. <3>[ 20.727599] INFO: task kworker/0:1:28 blocked for more than 10 seconds.
  550. <3>[ 20.728178] "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message.
  551. <6>[ 20.728762] kworker/0:1 D c06971fc 0 28 2 0x00000000
  552. <4>[ 20.729638] Backtrace:
  553. <4>[ 20.730268] [<c0696ec4>] (__schedule+0x0/0x75c) from [<c0697658>] (schedule+0x38/0x78)
  554. <4>[ 20.730882] [<c0697620>] (schedule+0x0/0x78) from [<c0695980>] (schedule_timeout+0x1ac/0x2d8)
  555. <4>[ 20.731496] [<c06957d4>] (schedule_timeout+0x0/0x2d8) from [<c0697c34>] (wait_for_common+0xcc/0x164)
  556. <4>[ 20.732225] [<c0697b68>] (wait_for_common+0x0/0x164) from [<c0697d74>] (wait_for_completion+0x18/0x1c)
  557. <4>[ 20.732651] [<c0697d5c>] (wait_for_completion+0x0/0x1c) from [<c02e7adc>] (_request_firmware_load+0xe8/0x1b8)
  558. <4>[ 20.733277] [<c02e79f4>] (_request_firmware_load+0x0/0x1b8) from [<c02e849c>] (request_firmware_work_func+0xa8/0xe4)
  559. <4>[ 20.733867] r8:c0955678 r7:c1b37d00 r6:c1b34780 r5:de18ba00 r4:de190800
  560. <4>[ 20.735424] r3:00000000
  561. <4>[ 20.736266] [<c02e83f4>] (request_firmware_work_func+0x0/0xe4) from [<c004cf04>] (process_one_work+0x154/0x4a0)
  562. <4>[ 20.737023] r5:dea9e000 r4:de9b7c40
  563. <4>[ 20.737901] [<c004cdb0>] (process_one_work+0x0/0x4a0) from [<c004d5c4>] (worker_thread+0x170/0x37c)
  564. <4>[ 20.738522] [<c004d454>] (worker_thread+0x0/0x37c) from [<c0053384>] (kthread+0x90/0x9c)
  565. <4>[ 20.739138] [<c00532f4>] (kthread+0x0/0x9c) from [<c0037b30>] (do_exit+0x0/0x790)
  566. <4>[ 20.739490] r6:c0037b30 r5:c00532f4 r4:de857eac
  567. <3>[ 20.740790] INFO: task kworker/0:2:56 blocked for more than 10 seconds.
  568. <3>[ 20.741123] "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message.
  569. <6>[ 20.741682] kworker/0:2 D c06971fc 0 56 2 0x00000000
  570. <4>[ 20.742822] Backtrace:
  571. <4>[ 20.743409] [<c0696ec4>] (__schedule+0x0/0x75c) from [<c0697658>] (schedule+0x38/0x78)
  572. <4>[ 20.744005] [<c0697620>] (schedule+0x0/0x78) from [<c0695980>] (schedule_timeout+0x1ac/0x2d8)
  573. <4>[ 20.744399] [<c06957d4>] (schedule_timeout+0x0/0x2d8) from [<c0697c34>] (wait_for_common+0xcc/0x164)
  574. <4>[ 20.745011] [<c0697b68>] (wait_for_common+0x0/0x164) from [<c0697d74>] (wait_for_completion+0x18/0x1c)
  575. <4>[ 20.745623] [<c0697d5c>] (wait_for_completion+0x0/0x1c) from [<c02e7adc>] (_request_firmware_load+0xe8/0x1b8)
  576. <4>[ 20.746239] [<c02e79f4>] (_request_firmware_load+0x0/0x1b8) from [<c02e849c>] (request_firmware_work_func+0xa8/0xe4)
  577. <4>[ 20.746833] r8:c0955678 r7:c1b37d00 r6:c1b34780 r5:de1cac00 r4:de1ab680
  578. <4>[ 20.749028] r3:00000000
  579. <4>[ 20.749425] [<c02e83f4>] (request_firmware_work_func+0x0/0xe4) from [<c004cf04>] (process_one_work+0x154/0x4a0)
  580. <4>[ 20.749669] r5:de1ac000 r4:de191f80
  581. <4>[ 20.749998] [<c004cdb0>] (process_one_work+0x0/0x4a0) from [<c004d5c4>] (worker_thread+0x170/0x37c)
  582. <4>[ 20.750089] [<c004d454>] (worker_thread+0x0/0x37c) from [<c0053384>] (kthread+0x90/0x9c)
  583. <4>[ 20.750147] [<c00532f4>] (kthread+0x0/0x9c) from [<c0037b30>] (do_exit+0x0/0x790)
  584. <4>[ 20.750232] r6:c0037b30 r5:c00532f4 r4:de857eac
  585. ~ # systConnection closed by foreign host.
Advertisement
Add Comment
Please, Sign In to add comment
Public Pastes
We use cookies for various purposes including analytics. By continuing to use Pastebin, you agree to our use of cookies as described in the Cookies Policy.  OK, I Understand
Not a member of Pastebin yet?
Sign Up, it unlocks many cool features!