Advertisement
Not a member of Pastebin yet?
Sign Up,
it unlocks many cool features!
- DiskStation> dmesg
- [ 0.000000] Linux version 3.2.40 (root@debian) (gcc version 4.2.0) #73 SMP Sat Feb 22 17:34:05 CET 2014
- [ 0.000000] Command line: root=/dev/md0 ihd_num=0 netif_num=4 syno_hw_version=DS3612xs mac1=00223208d63c mac2=00223208d63d mac3=00223208d63e mac4=00223208d63f sn=B3J4N00310
- [ 0.000000] KERNEL supported cpus:
- [ 0.000000] Intel GenuineIntel
- [ 0.000000] AMD AuthenticAMD
- [ 0.000000] Centaur CentaurHauls
- [ 0.000000] BIOS-provided physical RAM map:
- [ 0.000000] BIOS-e820: 0000000000000000 - 000000000009c000 (usable)
- [ 0.000000] BIOS-e820: 000000000009c000 - 00000000000a0000 (reserved)
- [ 0.000000] BIOS-e820: 00000000000e2000 - 0000000000100000 (reserved)
- [ 0.000000] BIOS-e820: 0000000000100000 - 00000000d7f90000 (usable)
- [ 0.000000] BIOS-e820: 00000000d7f9e000 - 00000000d7fa0000 type 9
- [ 0.000000] BIOS-e820: 00000000d7fa0000 - 00000000d7fae000 (ACPI data)
- [ 0.000000] BIOS-e820: 00000000d7fae000 - 00000000d7fe0000 (ACPI NVS)
- [ 0.000000] BIOS-e820: 00000000d7fe0000 - 00000000d8000000 (reserved)
- [ 0.000000] BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved)
- [ 0.000000] BIOS-e820: 00000000ffa00000 - 0000000100000000 (reserved)
- [ 0.000000] BIOS-e820: 0000000100000000 - 0000000220000000 (usable)
- [ 0.000000] NX (Execute Disable) protection: active
- [ 0.000000] SMBIOS 2.6 present.
- [ 0.000000] DMI: HP ProLiant MicroServer, BIOS O41 07/29/2011
- [ 0.000000] e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved)
- [ 0.000000] e820 remove range: 00000000000a0000 - 0000000000100000 (usable)
- [ 0.000000] No AGP bridge found
- [ 0.000000] last_pfn = 0x220000 max_arch_pfn = 0x400000000
- [ 0.000000] MTRR default type: uncachable
- [ 0.000000] MTRR fixed ranges enabled:
- [ 0.000000] 00000-9FFFF write-back
- [ 0.000000] A0000-EFFFF uncachable
- [ 0.000000] F0000-FFFFF write-protect
- [ 0.000000] MTRR variable ranges enabled:
- [ 0.000000] 0 base 000000000000 mask FFFF80000000 write-back
- [ 0.000000] 1 base 000080000000 mask FFFFC0000000 write-back
- [ 0.000000] 2 base 0000C0000000 mask FFFFE0000000 write-back
- [ 0.000000] 3 disabled
- [ 0.000000] 4 disabled
- [ 0.000000] 5 disabled
- [ 0.000000] 6 disabled
- [ 0.000000] 7 disabled
- [ 0.000000] TOM2: 0000000220000000 aka 8704M
- [ 0.000000] e820 update range: 00000000e0000000 - 0000000100000000 (usable) ==> (reserved)
- [ 0.000000] last_pfn = 0xd7f90 max_arch_pfn = 0x400000000
- [ 0.000000] found SMP MP-table at [ffff8800000ff780] ff780
- [ 0.000000] initial memory mapped : 0 - 20000000
- [ 0.000000] Base memory trampoline at [ffff880000097000] 97000 size 20480
- [ 0.000000] Using GB pages for direct mapping
- [ 0.000000] init_memory_mapping: 0000000000000000-00000000d7f90000
- [ 0.000000] 0000000000 - 00c0000000 page 1G
- [ 0.000000] 00c0000000 - 00d7e00000 page 2M
- [ 0.000000] 00d7e00000 - 00d7f90000 page 4k
- [ 0.000000] kernel direct mapping tables up to d7f90000 @ 1fffd000-20000000
- [ 0.000000] init_memory_mapping: 0000000100000000-0000000220000000
- [ 0.000000] 0100000000 - 0200000000 page 1G
- [ 0.000000] 0200000000 - 0220000000 page 2M
- [ 0.000000] kernel direct mapping tables up to 220000000 @ d7f8e000-d7f90000
- [ 0.000000] RAMDISK: 7fabf000 - 7fff0000
- [ 0.000000] ACPI: RSDP 00000000000f8f50 00024 (v02 HP )
- [ 0.000000] ACPI: XSDT 00000000d7fa0100 0007C (v01 HP ProLiant 20110729 HP 00000097)
- [ 0.000000] ACPI: FACP 00000000d7fa0290 000F4 (v03 HP ProLiant 20110729 HP 00000097)
- [ 0.000000] ACPI: DSDT 00000000d7fa0620 06947 (v01 HP ProLiant 00000006 INTL 20051117)
- [ 0.000000] ACPI: FACS 00000000d7fae000 00040
- [ 0.000000] ACPI: APIC 00000000d7fa0390 00072 (v01 HP ProLiant 20110729 HP 00000097)
- [ 0.000000] ACPI: MCFG 00000000d7fa0410 0003C (v01 HP ProLiant 20110729 HP 00000097)
- [ 0.000000] ACPI: SPMI 00000000d7fa0450 00041 (v05 HP ProLiant 20110729 HP 00000097)
- [ 0.000000] ACPI: OEMB 00000000d7fae040 00072 (v01 HP ProLiant 20110729 HP 00000097)
- [ 0.000000] ACPI: HPET 00000000d7fab4e0 00038 (v01 HP ProLiant 20110729 HP 00000097)
- [ 0.000000] ACPI: EINJ 00000000d7fab520 00130 (v01 AMIER AMI_EINJ 20110729 HP 00000097)
- [ 0.000000] ACPI: BERT 00000000d7fab6b0 00030 (v01 AMIER AMI_BERT 20110729 HP 00000097)
- [ 0.000000] ACPI: ERST 00000000d7fab6e0 001B0 (v01 AMIER AMI_ERST 20110729 HP 00000097)
- [ 0.000000] ACPI: HEST 00000000d7fab890 000A8 (v01 AMIER ABC_HEST 20110729 HP 00000097)
- [ 0.000000] ACPI: SSDT 00000000d7fab940 00458 (v01 HP ProLiant 00000001 AMD 00000001)
- [ 0.000000] ACPI: Local APIC address 0xfee00000
- [ 0.000000] [ffffea0000000000-ffffea00077fffff] PMD -> [ffff880217800000-ffff88021e7fffff] on node 0
- [ 0.000000] Zone PFN ranges:
- [ 0.000000] DMA 0x00000010 -> 0x00001000
- [ 0.000000] DMA32 0x00001000 -> 0x00100000
- [ 0.000000] Normal 0x00100000 -> 0x00220000
- [ 0.000000] Movable zone start PFN for each node
- [ 0.000000] early_node_map[3] active PFN ranges
- [ 0.000000] 0: 0x00000010 -> 0x0000009c
- [ 0.000000] 0: 0x00000100 -> 0x000d7f90
- [ 0.000000] 0: 0x00100000 -> 0x00220000
- [ 0.000000] On node 0 totalpages: 2064156
- [ 0.000000] DMA zone: 56 pages used for memmap
- [ 0.000000] DMA zone: 5 pages reserved
- [ 0.000000] DMA zone: 3919 pages, LIFO batch:0
- [ 0.000000] DMA32 zone: 14280 pages used for memmap
- [ 0.000000] DMA32 zone: 866248 pages, LIFO batch:31
- [ 0.000000] Normal zone: 16128 pages used for memmap
- [ 0.000000] Normal zone: 1163520 pages, LIFO batch:31
- [ 0.000000] ACPI: PM-Timer IO Port: 0x808
- [ 0.000000] ACPI: Local APIC address 0xfee00000
- [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
- [ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
- [ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x82] disabled)
- [ 0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x83] disabled)
- [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0xff] dfl dfl lint[0x1])
- [ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
- [ 0.000000] IOAPIC[0]: apic_id 2, version 33, address 0xfec00000, GSI 0-23
- [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
- [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level)
- [ 0.000000] ACPI: IRQ0 used by override.
- [ 0.000000] ACPI: IRQ2 used by override.
- [ 0.000000] ACPI: IRQ9 used by override.
- [ 0.000000] Using ACPI (MADT) for SMP configuration information
- [ 0.000000] ACPI: HPET id: 0x8300 base: 0xfed00000
- [ 0.000000] SMP: Allowing 4 CPUs, 2 hotplug CPUs
- [ 0.000000] nr_irqs_gsi: 40
- [ 0.000000] PM: Registered nosave memory: 000000000009c000 - 00000000000a0000
- [ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000e2000
- [ 0.000000] PM: Registered nosave memory: 00000000000e2000 - 0000000000100000
- [ 0.000000] PM: Registered nosave memory: 00000000d7f90000 - 00000000d7f9e000
- [ 0.000000] PM: Registered nosave memory: 00000000d7f9e000 - 00000000d7fa0000
- [ 0.000000] PM: Registered nosave memory: 00000000d7fa0000 - 00000000d7fae000
- [ 0.000000] PM: Registered nosave memory: 00000000d7fae000 - 00000000d7fe0000
- [ 0.000000] PM: Registered nosave memory: 00000000d7fe0000 - 00000000d8000000
- [ 0.000000] PM: Registered nosave memory: 00000000d8000000 - 00000000e0000000
- [ 0.000000] PM: Registered nosave memory: 00000000e0000000 - 00000000f0000000
- [ 0.000000] PM: Registered nosave memory: 00000000f0000000 - 00000000ffa00000
- [ 0.000000] PM: Registered nosave memory: 00000000ffa00000 - 0000000100000000
- [ 0.000000] Allocating PCI resources starting at f0000000 (gap: f0000000:fa00000)
- [ 0.000000] setup_percpu: NR_CPUS:8 nr_cpumask_bits:8 nr_cpu_ids:4 nr_node_ids:1
- [ 0.000000] PERCPU: Embedded 25 pages/cpu @ffff88021fc00000 s69888 r8192 d24320 u524288
- [ 0.000000] pcpu-alloc: s69888 r8192 d24320 u524288 alloc=1*2097152
- [ 0.000000] pcpu-alloc: [0] 0 1 2 3
- [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 2033687
- [ 0.000000] Kernel command line: root=/dev/md0 ihd_num=0 netif_num=4 syno_hw_version=DS3612xs mac1=00223208d63c mac2=00223208d63d mac3=00223208d63e mac4=00223208d63f sn=B3J4N00310
- [ 0.000000] Internal HD num: 0
- [ 0.000000] Internal netif num: 4
- [ 0.000000] Synology Hardware Version: DS3612xs-j
- [ 0.000000] Mac1: 00223208d63c
- [ 0.000000] Mac2: 00223208d63d
- [ 0.000000] Mac3: 00223208d63e
- [ 0.000000] Mac4: 00223208d63f
- [ 0.000000] Serial Number: B3J4N00310
- [ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
- [ 0.000000] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes)
- [ 0.000000] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes)
- [ 0.000000] Checking aperture...
- [ 0.000000] No AGP bridge found
- [ 0.000000] Node 0: aperture @ cc000000 size 32 MB
- [ 0.000000] Aperture pointing to e820 RAM. Ignoring.
- [ 0.000000] Your BIOS doesn't leave a aperture memory hole
- [ 0.000000] Please enable the IOMMU option in the BIOS setup
- [ 0.000000] This costs you 64 MB of RAM
- [ 0.000000] Mapping aperture over 65536 KB of RAM @ cc000000
- [ 0.000000] PM: Registered nosave memory: 00000000cc000000 - 00000000d0000000
- [ 0.000000] Memory: 7983656k/8912896k available (3949k kernel code, 656272k absent, 272968k reserved, 2570k data, 444k init)
- [ 0.000000] Hierarchical RCU implementation.
- [ 0.000000] CONFIG_RCU_FANOUT set to non-default value of 32
- [ 0.000000] RCU dyntick-idle grace-period acceleration is enabled.
- [ 0.000000] NR_IRQS:4352 nr_irqs:712 16
- [ 0.000000] Extended CMOS year: 2000
- [ 0.000000] Console: colour VGA+ 80x25
- [ 0.000000] console [tty0] enabled
- [ 0.000000] hpet clockevent registered
- [ 0.000000] Fast TSC calibration using PIT
- [ 0.000000] Detected 1497.652 MHz processor.
- [ 0.001003] Calibrating delay loop (skipped), value calculated using timer frequency.. 2995.30 BogoMIPS (lpj=1497652)
- [ 0.001083] pid_max: default: 32768 minimum: 301
- [ 0.001194] Mount-cache hash table entries: 256
- [ 0.001369] tseg: 0000000000
- [ 0.001379] CPU: Physical Processor ID: 0
- [ 0.001418] CPU: Processor Core ID: 0
- [ 0.001457] mce: CPU supports 6 MCE banks
- [ 0.001505] using AMD E400 aware idle routine
- [ 0.001579] ACPI: Core revision 20110623
- [ 0.006396] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
- [ 0.016536] CPU0: AMD Turion(tm) II Neo N40L Dual-Core Processor stepping 03
- [ 0.016998] Performance Events: AMD PMU driver.
- [ 0.016998] ... version: 0
- [ 0.016998] ... bit width: 48
- [ 0.016998] ... generic registers: 4
- [ 0.016998] ... value mask: 0000ffffffffffff
- [ 0.016998] ... max period: 00007fffffffffff
- [ 0.016998] ... fixed-purpose events: 0
- [ 0.016998] ... event mask: 000000000000000f
- [ 0.016998] Booting Node 0, Processors #1
- [ 0.016998] smpboot cpu 1: start_ip = 97000
- [ 0.088002] Brought up 2 CPUs
- [ 0.088007] System has AMD C1E enabled
- [ 0.088022] Switch to broadcast mode on CPU1
- [ 0.088118] Total of 2 processors activated (5990.45 BogoMIPS).
- [ 0.088830] Switch to broadcast mode on CPU0
- [ 0.088830] PM: Registering ACPI NVS region at d7fae000 (204800 bytes)
- [ 0.088830] xor: automatically using best checksumming function: generic_sse
- [ 0.093007] generic_sse: 5936.000 MB/sec
- [ 0.093046] xor: using function: generic_sse (5936.000 MB/sec)
- [ 0.093155] NET: Registered protocol family 16
- [ 0.095027] node 0 link 0: io port [1000, ffffff]
- [ 0.095027] TOM: 00000000e0000000 aka 3584M
- [ 0.095057] Fam 10h mmconf [mem 0xe0000000-0xefffffff]
- [ 0.095061] node 0 link 0: mmio [a0000, bffff]
- [ 0.095065] node 0 link 0: mmio [e0000000, f7ffffff] ==> [f0000000, f7ffffff]
- [ 0.095071] node 0 link 0: mmio [f8000000, fe5fffff]
- [ 0.095074] node 0 link 0: mmio [fe600000, fe7fffff]
- [ 0.095078] node 0 link 0: mmio [fe800000, ffdfffff]
- [ 0.095081] TOM2: 0000000220000000 aka 8704M
- [ 0.095121] bus: [00, 1f] on node 0 link 0
- [ 0.095124] bus: 00 index 0 [io 0x0000-0xffff]
- [ 0.095127] bus: 00 index 1 [mem 0x000a0000-0x000bffff]
- [ 0.095130] bus: 00 index 2 [mem 0xf0000000-0xffffffff]
- [ 0.095133] bus: 00 index 3 [mem 0x220000000-0xfcffffffff]
- [ 0.095143] Extended Config Space enabled on 1 nodes
- [ 0.095197] ACPI: bus type pci registered
- [ 0.095245] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
- [ 0.095245] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in E820
- [ 0.116363] PCI: Using configuration type 1 for base access
- [ 0.125071] bio: create slab <bio-0> at 0
- [ 0.141010] raid6: int64x1 1414 MB/s
- [ 0.158003] raid6: int64x2 1671 MB/s
- [ 0.175002] raid6: int64x4 1867 MB/s
- [ 0.192014] raid6: int64x8 1425 MB/s
- [ 0.208995] raid6: sse2x1 2105 MB/s
- [ 0.225998] raid6: sse2x2 2976 MB/s
- [ 0.243002] raid6: sse2x4 3992 MB/s
- [ 0.243041] raid6: using algorithm sse2x4 (3992 MB/s)
- [ 0.244003] ACPI: Added _OSI(Module Device)
- [ 0.244042] ACPI: Added _OSI(Processor Device)
- [ 0.244082] ACPI: Added _OSI(3.0 _SCP Extensions)
- [ 0.244121] ACPI: Added _OSI(Processor Aggregator Device)
- [ 0.245683] ACPI: EC: Look up EC in DSDT
- [ 0.246721] ACPI: Executed 2 blocks of module-level executable AML code
- [ 0.249994] [Firmware Bug]: ACPI: BIOS _OSI(Linux) query ignored
- [ 0.253057] ACPI: OEMN 00000000d7faaeb0 00624 (v01 AMD NAHP 00000001 INTL 20051117)
- [ 0.253427] ACPI: Dynamic OEM Table Load:
- [ 0.253532] ACPI: OEMN (null) 00624 (v01 AMD NAHP 00000001 INTL 20051117)
- [ 0.257160] \_SB_:_OSC evaluation returned wrong type
- [ 0.257164] _OSC request data:1 6
- [ 0.257383] ACPI: Interpreter enabled
- [ 0.257430] ACPI: (supports S0 S4 S5)
- [ 0.257585] ACPI: Using IOAPIC for interrupt routing
- [ 0.272146] ACPI: No dock devices found.
- [ 0.272193] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
- [ 0.273278] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
- [ 0.274192] pci_root PNP0A08:00: host bridge window [io 0x0000-0x0cf7]
- [ 0.274236] pci_root PNP0A08:00: host bridge window [io 0x0d00-0xffff]
- [ 0.274278] pci_root PNP0A08:00: host bridge window [mem 0x000a0000-0x000bffff]
- [ 0.274321] pci_root PNP0A08:00: host bridge window [mem 0x000d0000-0x000dffff]
- [ 0.274365] pci_root PNP0A08:00: host bridge window [mem 0xd8000000-0xdfffffff]
- [ 0.274408] pci_root PNP0A08:00: host bridge window [mem 0xf0000000-0xfebfffff]
- [ 0.274451] pci_root PNP0A08:00: host bridge window [mem 0xd8000000-0xdfffffff]
- [ 0.274494] pci_root PNP0A08:00: host bridge window [mem 0xf0000000-0xffffffff]
- [ 0.274539] pci_root PNP0A08:00: host bridge window expanded to [mem 0xd8000000-0xdfffffff]; [mem 0xd8000000-0xdfffffff] ignored
- [ 0.274586] pci_root PNP0A08:00: host bridge window expanded to [mem 0xf0000000-0xffffffff]; [mem 0xf0000000-0xffffffff] ignored
- [ 0.274636] pci_root PNP0A08:00: ignoring host bridge window [mem 0x000d0000-0x000dffff] (conflicts with Adapter ROM [mem 0x000cf000-0x000d19ff])
- [ 0.274700] pci 0000:00:00.0: [1022:9601] type 0 class 0x000600
- [ 0.274763] pci 0000:00:01.0: [103c:9602] type 1 class 0x000604
- [ 0.274809] pci 0000:00:04.0: [1022:9604] type 1 class 0x000604
- [ 0.274852] pci 0000:00:04.0: PME# supported from D0 D3hot D3cold
- [ 0.274856] pci 0000:00:04.0: PME# disabled
- [ 0.274874] pci 0000:00:06.0: [1022:9606] type 1 class 0x000604
- [ 0.274914] pci 0000:00:06.0: PME# supported from D0 D3hot D3cold
- [ 0.274918] pci 0000:00:06.0: PME# disabled
- [ 0.274956] pci 0000:00:11.0: [1002:4391] type 0 class 0x000106
- [ 0.275016] pci 0000:00:11.0: reg 10: [io 0xc000-0xc007]
- [ 0.275027] pci 0000:00:11.0: reg 14: [io 0xb000-0xb003]
- [ 0.275038] pci 0000:00:11.0: reg 18: [io 0xa000-0xa007]
- [ 0.275049] pci 0000:00:11.0: reg 1c: [io 0x9000-0x9003]
- [ 0.275060] pci 0000:00:11.0: reg 20: [io 0x8000-0x800f]
- [ 0.275071] pci 0000:00:11.0: reg 24: [mem 0xfe5ffc00-0xfe5fffff]
- [ 0.275142] pci 0000:00:12.0: [1002:4397] type 0 class 0x000c03
- [ 0.275157] pci 0000:00:12.0: reg 10: [mem 0xfe5fe000-0xfe5fefff]
- [ 0.275231] pci 0000:00:12.2: [1002:4396] type 0 class 0x000c03
- [ 0.275251] pci 0000:00:12.2: reg 10: [mem 0xfe5ff800-0xfe5ff8ff]
- [ 0.275334] pci 0000:00:12.2: supports D1 D2
- [ 0.275337] pci 0000:00:12.2: PME# supported from D0 D1 D2 D3hot
- [ 0.275342] pci 0000:00:12.2: PME# disabled
- [ 0.275365] pci 0000:00:13.0: [1002:4397] type 0 class 0x000c03
- [ 0.275379] pci 0000:00:13.0: reg 10: [mem 0xfe5fd000-0xfe5fdfff]
- [ 0.275453] pci 0000:00:13.2: [1002:4396] type 0 class 0x000c03
- [ 0.275473] pci 0000:00:13.2: reg 10: [mem 0xfe5ff400-0xfe5ff4ff]
- [ 0.275555] pci 0000:00:13.2: supports D1 D2
- [ 0.275558] pci 0000:00:13.2: PME# supported from D0 D1 D2 D3hot
- [ 0.275563] pci 0000:00:13.2: PME# disabled
- [ 0.275586] pci 0000:00:14.0: [1002:4385] type 0 class 0x000c05
- [ 0.275664] pci 0000:00:14.3: [1002:439d] type 0 class 0x000601
- [ 0.275742] pci 0000:00:14.4: [1002:4384] type 1 class 0x000604
- [ 0.275791] pci 0000:00:16.0: [1002:4397] type 0 class 0x000c03
- [ 0.275806] pci 0000:00:16.0: reg 10: [mem 0xfe5fc000-0xfe5fcfff]
- [ 0.275879] pci 0000:00:16.2: [1002:4396] type 0 class 0x000c03
- [ 0.275899] pci 0000:00:16.2: reg 10: [mem 0xfe5ff000-0xfe5ff0ff]
- [ 0.276006] pci 0000:00:16.2: supports D1 D2
- [ 0.276009] pci 0000:00:16.2: PME# supported from D0 D1 D2 D3hot
- [ 0.276014] pci 0000:00:16.2: PME# disabled
- [ 0.276036] pci 0000:00:18.0: [1022:1200] type 0 class 0x000600
- [ 0.276058] pci 0000:00:18.1: [1022:1201] type 0 class 0x000600
- [ 0.276076] pci 0000:00:18.2: [1022:1202] type 0 class 0x000600
- [ 0.276095] pci 0000:00:18.3: [1022:1203] type 0 class 0x000600
- [ 0.276117] pci 0000:00:18.4: [1022:1204] type 0 class 0x000600
- [ 0.276168] pci 0000:01:05.0: [1002:9712] type 0 class 0x000300
- [ 0.276179] pci 0000:01:05.0: reg 10: [mem 0xf0000000-0xf7ffffff pref]
- [ 0.276186] pci 0000:01:05.0: reg 14: [io 0xd000-0xd0ff]
- [ 0.276192] pci 0000:01:05.0: reg 18: [mem 0xfe7f0000-0xfe7fffff]
- [ 0.276204] pci 0000:01:05.0: reg 24: [mem 0xfe600000-0xfe6fffff]
- [ 0.276226] pci 0000:01:05.0: supports D1 D2
- [ 0.276265] pci 0000:00:01.0: PCI bridge to [bus 01-01]
- [ 0.276307] pci 0000:00:01.0: bridge window [io 0xd000-0xdfff]
- [ 0.276311] pci 0000:00:01.0: bridge window [mem 0xfe600000-0xfe7fffff]
- [ 0.276317] pci 0000:00:01.0: bridge window [mem 0xf0000000-0xf7ffffff 64bit pref]
- [ 0.276369] pci 0000:02:00.0: [1095:3132] type 0 class 0x000106
- [ 0.276398] pci 0000:02:00.0: reg 10: [mem 0xfe8ffc00-0xfe8ffc7f 64bit]
- [ 0.276421] pci 0000:02:00.0: reg 18: [mem 0xfe8f8000-0xfe8fbfff 64bit]
- [ 0.276437] pci 0000:02:00.0: reg 20: [io 0xe800-0xe87f]
- [ 0.276465] pci 0000:02:00.0: reg 30: [mem 0xfe800000-0xfe87ffff pref]
- [ 0.276535] pci 0000:02:00.0: supports D1 D2
- [ 0.276556] pci 0000:02:00.0: disabling ASPM on pre-1.1 PCIe device. You can enable it with 'pcie_aspm=force'
- [ 0.276609] pci 0000:00:04.0: PCI bridge to [bus 02-02]
- [ 0.276650] pci 0000:00:04.0: bridge window [io 0xe000-0xefff]
- [ 0.276655] pci 0000:00:04.0: bridge window [mem 0xfe800000-0xfe8fffff]
- [ 0.276705] pci 0000:03:00.0: [14e4:165b] type 0 class 0x000200
- [ 0.276725] pci 0000:03:00.0: reg 10: [mem 0xfe9f0000-0xfe9fffff 64bit]
- [ 0.276831] pci 0000:03:00.0: PME# supported from D3hot D3cold
- [ 0.276836] pci 0000:03:00.0: PME# disabled
- [ 0.278002] pci 0000:00:06.0: PCI bridge to [bus 03-03]
- [ 0.278053] pci 0000:00:06.0: bridge window [mem 0xfe900000-0xfe9fffff]
- [ 0.278123] pci 0000:00:14.4: PCI bridge to [bus 04-04] (subtractive decode)
- [ 0.278172] pci 0000:00:14.4: bridge window [io 0x0000-0x0cf7] (subtractive decode)
- [ 0.278176] pci 0000:00:14.4: bridge window [io 0x0d00-0xffff] (subtractive decode)
- [ 0.278180] pci 0000:00:14.4: bridge window [mem 0x000a0000-0x000bffff] (subtractive decode)
- [ 0.278184] pci 0000:00:14.4: bridge window [mem 0xd8000000-0xdfffffff] (subtractive decode)
- [ 0.278187] pci 0000:00:14.4: bridge window [mem 0xf0000000-0xffffffff] (subtractive decode)
- [ 0.278204] pci_bus 0000:00: on NUMA node 0
- [ 0.278212] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
- [ 0.278521] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P1._PRT]
- [ 0.278576] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCE4._PRT]
- [ 0.278618] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCE6._PRT]
- [ 0.278889] pci0000:00: Requesting ACPI _OSC control (0x1d)
- [ 0.279224] pci0000:00: ACPI _OSC control (0x1d) granted
- [ 0.291054] ACPI: PCI Interrupt Link [LNKA] (IRQs 4 7 10 11 14 15) *0
- [ 0.291470] ACPI: PCI Interrupt Link [LNKB] (IRQs 4 7 10 11 14 15) *0
- [ 0.292063] ACPI: PCI Interrupt Link [LNKC] (IRQs 4 7 10 11 14 15) *0
- [ 0.292472] ACPI: PCI Interrupt Link [LNKD] (IRQs 4 7 10 11 14 15) *0
- [ 0.292865] ACPI: PCI Interrupt Link [LNKE] (IRQs 4 7 10 11 14 15) *0
- [ 0.293246] ACPI: PCI Interrupt Link [LNKF] (IRQs 4 7 10 11 14 15) *0
- [ 0.293624] ACPI: PCI Interrupt Link [LNKG] (IRQs 4 7 10 11 14 15) *0
- [ 0.294010] ACPI: PCI Interrupt Link [LNKH] (IRQs 4 7 10 11 14 15) *0
- [ 0.294370] vgaarb: device added: PCI:0000:01:05.0,decodes=io+mem,owns=io+mem,locks=none
- [ 0.294370] vgaarb: loaded
- [ 0.294370] vgaarb: bridge control possible 0000:01:05.0
- [ 0.295028] SCSI subsystem initialized
- [ 0.295032] libata version 3.00 loaded.
- [ 0.295032] PCI: Using ACPI for IRQ routing
- [ 0.304242] PCI: pci_cache_line_size set to 64 bytes
- [ 0.304322] reserve RAM buffer: 000000000009c000 - 000000000009ffff
- [ 0.304326] reserve RAM buffer: 00000000d7f90000 - 00000000d7ffffff
- [ 0.304352] Switching to clocksource hpet
- [ 0.304352] pnp: PnP ACPI init
- [ 0.304352] ACPI: bus type pnp registered
- [ 0.304609] pnp 00:00: [bus 00-ff]
- [ 0.304613] pnp 00:00: [io 0x0cf8-0x0cff]
- [ 0.304617] pnp 00:00: [io 0x0000-0x0cf7 window]
- [ 0.304620] pnp 00:00: [io 0x0d00-0xffff window]
- [ 0.304624] pnp 00:00: [mem 0x000a0000-0x000bffff window]
- [ 0.304627] pnp 00:00: [mem 0x000d0000-0x000dffff window]
- [ 0.304630] pnp 00:00: [mem 0xd8000000-0xdfffffff window]
- [ 0.304634] pnp 00:00: [mem 0xf0000000-0xfebfffff window]
- [ 0.304637] pnp 00:00: [mem 0xd8000000-0xdfffffff window]
- [ 0.304640] pnp 00:00: [mem 0xf0000000-0xffffffff window]
- [ 0.304807] pnp 00:00: Plug and Play ACPI device, IDs PNP0a08 PNP0a03 (active)
- [ 0.304966] pnp 00:01: [mem 0x00000000-0xffffffffffffffff disabled]
- [ 0.304970] pnp 00:01: [mem 0xd8000000-0xdfffffff]
- [ 0.305172] system 00:01: [mem 0xd8000000-0xdfffffff] has been reserved
- [ 0.305218] system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active)
- [ 0.305302] pnp 00:02: [dma 4]
- [ 0.305308] pnp 00:02: [io 0x0000-0x000f]
- [ 0.305312] pnp 00:02: [io 0x0081-0x0083]
- [ 0.305315] pnp 00:02: [io 0x0087]
- [ 0.305317] pnp 00:02: [io 0x0089-0x008b]
- [ 0.305320] pnp 00:02: [io 0x008f]
- [ 0.305323] pnp 00:02: [io 0x00c0-0x00df]
- [ 0.305482] pnp 00:02: Plug and Play ACPI device, IDs PNP0200 (active)
- [ 0.305504] pnp 00:03: [io 0x0070-0x0071]
- [ 0.305517] pnp 00:03: [irq 8]
- [ 0.305679] pnp 00:03: Plug and Play ACPI device, IDs PNP0b00 (active)
- [ 0.305751] pnp 00:04: [io 0x0061]
- [ 0.305907] pnp 00:04: Plug and Play ACPI device, IDs PNP0800 (active)
- [ 0.305928] pnp 00:05: [io 0x00f0-0x00ff]
- [ 0.305937] pnp 00:05: [irq 13]
- [ 0.306098] pnp 00:05: Plug and Play ACPI device, IDs PNP0c04 (active)
- [ 0.306145] pnp 00:06: [mem 0xfed00000-0xfed003ff]
- [ 0.306289] pnp 00:06: Plug and Play ACPI device, IDs PNP0103 (active)
- [ 0.306412] pnp 00:07: [io 0x0060]
- [ 0.306415] pnp 00:07: [io 0x0064]
- [ 0.306418] pnp 00:07: [mem 0xfec00000-0xfec00fff]
- [ 0.306421] pnp 00:07: [mem 0xfee00000-0xfee00fff]
- [ 0.306607] system 00:07: [mem 0xfec00000-0xfec00fff] could not be reserved
- [ 0.306652] system 00:07: [mem 0xfee00000-0xfee00fff] has been reserved
- [ 0.306695] system 00:07: Plug and Play ACPI device, IDs PNP0c02 (active)
- [ 0.306906] pnp 00:08: [io 0x0010-0x001f]
- [ 0.306909] pnp 00:08: [io 0x0022-0x003f]
- [ 0.306912] pnp 00:08: [io 0x0062-0x0063]
- [ 0.306915] pnp 00:08: [io 0x0065-0x006f]
- [ 0.306918] pnp 00:08: [io 0x0072-0x007f]
- [ 0.306920] pnp 00:08: [io 0x0080]
- [ 0.306923] pnp 00:08: [io 0x0084-0x0086]
- [ 0.306926] pnp 00:08: [io 0x0088]
- [ 0.306928] pnp 00:08: [io 0x008c-0x008e]
- [ 0.306931] pnp 00:08: [io 0x0090-0x009f]
- [ 0.306934] pnp 00:08: [io 0x00a2-0x00bf]
- [ 0.306937] pnp 00:08: [io 0x00b1]
- [ 0.306939] pnp 00:08: [io 0x00e0-0x00ef]
- [ 0.306942] pnp 00:08: [io 0x04d0-0x04d1]
- [ 0.306945] pnp 00:08: [io 0x040b]
- [ 0.306948] pnp 00:08: [io 0x04d6]
- [ 0.306951] pnp 00:08: [io 0x0c00-0x0c01]
- [ 0.306954] pnp 00:08: [io 0x0c14]
- [ 0.306956] pnp 00:08: [io 0x0c50-0x0c51]
- [ 0.306959] pnp 00:08: [io 0x0c52]
- [ 0.306962] pnp 00:08: [io 0x0c6c]
- [ 0.306964] pnp 00:08: [io 0x0c6f]
- [ 0.306967] pnp 00:08: [io 0x0cd0-0x0cd1]
- [ 0.306970] pnp 00:08: [io 0x0cd2-0x0cd3]
- [ 0.306972] pnp 00:08: [io 0x0cd4-0x0cd5]
- [ 0.306975] pnp 00:08: [io 0x0cd6-0x0cd7]
- [ 0.306978] pnp 00:08: [io 0x0cd8-0x0cdf]
- [ 0.306980] pnp 00:08: [io 0x0800-0x089f]
- [ 0.306984] pnp 00:08: [io 0x0000-0xffffffffffffffff disabled]
- [ 0.306987] pnp 00:08: [io 0x0b00-0x0b1f]
- [ 0.306990] pnp 00:08: [io 0x0b20-0x0b3f]
- [ 0.306992] pnp 00:08: [io 0x0900-0x090f]
- [ 0.306995] pnp 00:08: [io 0x0910-0x091f]
- [ 0.306998] pnp 00:08: [io 0xfe00-0xfefe]
- [ 0.307026] pnp 00:08: [io 0x0060]
- [ 0.307028] pnp 00:08: [io 0x0064]
- [ 0.307032] pnp 00:08: [mem 0xffb80000-0xffbfffff]
- [ 0.307035] pnp 00:08: [mem 0xfec10000-0xfec1001f]
- [ 0.307038] pnp 00:08: [mem 0xfed80000-0xfed80fff]
- [ 0.307041] pnp 00:08: [mem 0x00000000-0xffffffffffffffff disabled]
- [ 0.307272] system 00:08: [io 0x04d0-0x04d1] has been reserved
- [ 0.307315] system 00:08: [io 0x040b] has been reserved
- [ 0.307355] system 00:08: [io 0x04d6] has been reserved
- [ 0.307396] system 00:08: [io 0x0c00-0x0c01] has been reserved
- [ 0.307436] system 00:08: [io 0x0c14] has been reserved
- [ 0.307477] system 00:08: [io 0x0c50-0x0c51] has been reserved
- [ 0.307518] system 00:08: [io 0x0c52] has been reserved
- [ 0.307558] system 00:08: [io 0x0c6c] has been reserved
- [ 0.307598] system 00:08: [io 0x0c6f] has been reserved
- [ 0.307639] system 00:08: [io 0x0cd0-0x0cd1] has been reserved
- [ 0.307679] system 00:08: [io 0x0cd2-0x0cd3] has been reserved
- [ 0.307720] system 00:08: [io 0x0cd4-0x0cd5] has been reserved
- [ 0.307761] system 00:08: [io 0x0cd6-0x0cd7] has been reserved
- [ 0.307802] system 00:08: [io 0x0cd8-0x0cdf] has been reserved
- [ 0.307843] system 00:08: [io 0x0800-0x089f] has been reserved
- [ 0.307884] system 00:08: [io 0x0b00-0x0b1f] has been reserved
- [ 0.307925] system 00:08: [io 0x0b20-0x0b3f] has been reserved
- [ 0.307966] system 00:08: [io 0x0900-0x090f] has been reserved
- [ 0.308026] system 00:08: [io 0x0910-0x091f] has been reserved
- [ 0.308072] system 00:08: [io 0xfe00-0xfefe] has been reserved
- [ 0.308114] system 00:08: [mem 0xffb80000-0xffbfffff] has been reserved
- [ 0.308156] system 00:08: [mem 0xfec10000-0xfec1001f] has been reserved
- [ 0.308197] system 00:08: [mem 0xfed80000-0xfed80fff] has been reserved
- [ 0.308240] system 00:08: Plug and Play ACPI device, IDs PNP0c02 (active)
- [ 0.308310] pnp 00:09: [mem 0xe0000000-0xefffffff]
- [ 0.308467] system 00:09: [mem 0xe0000000-0xefffffff] has been reserved
- [ 0.308510] system 00:09: Plug and Play ACPI device, IDs PNP0c02 (active)
- [ 0.308643] pnp 00:0a: [mem 0x00000000-0x0009ffff]
- [ 0.308646] pnp 00:0a: [mem 0x00000000-0xffffffffffffffff disabled]
- [ 0.308650] pnp 00:0a: [mem 0x000e0000-0x000fffff]
- [ 0.308654] pnp 00:0a: [mem 0x00100000-0xd7ffffff]
- [ 0.308657] pnp 00:0a: [mem 0xfec00000-0xffffffff]
- [ 0.308684] pnp 00:0a: [Firmware Bug]: [mem 0x00000000-0xffffffffffffffff disabled] covers only part of AMD MMCONFIG area [mem 0xe0000000-0xefffffff]; adding more reservations
- [ 0.308889] system 00:0a: [mem 0x00000000-0x0009ffff] could not be reserved
- [ 0.308935] system 00:0a: [mem 0x000e0000-0x000fffff] could not be reserved
- [ 0.308977] system 00:0a: [mem 0x00100000-0xd7ffffff] could not be reserved
- [ 0.309032] system 00:0a: [mem 0xfec00000-0xffffffff] could not be reserved
- [ 0.309079] system 00:0a: Plug and Play ACPI device, IDs PNP0c01 (active)
- [ 0.309209] pnp: PnP ACPI: found 11 devices
- [ 0.309248] ACPI: ACPI bus type pnp unregistered
- [ 0.319340] PCI: max bus depth: 1 pci_try_num: 2
- [ 0.319366] pci 0000:00:01.0: PCI bridge to [bus 01-01]
- [ 0.319410] pci 0000:00:01.0: bridge window [io 0xd000-0xdfff]
- [ 0.319453] pci 0000:00:01.0: bridge window [mem 0xfe600000-0xfe7fffff]
- [ 0.319495] pci 0000:00:01.0: bridge window [mem 0xf0000000-0xf7ffffff 64bit pref]
- [ 0.319541] pci 0000:00:04.0: PCI bridge to [bus 02-02]
- [ 0.319581] pci 0000:00:04.0: bridge window [io 0xe000-0xefff]
- [ 0.319623] pci 0000:00:04.0: bridge window [mem 0xfe800000-0xfe8fffff]
- [ 0.319667] pci 0000:00:06.0: PCI bridge to [bus 03-03]
- [ 0.319708] pci 0000:00:06.0: bridge window [mem 0xfe900000-0xfe9fffff]
- [ 0.319751] pci 0000:00:14.4: PCI bridge to [bus 04-04]
- [ 0.319823] pci 0000:00:04.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
- [ 0.319865] pci 0000:00:04.0: setting latency timer to 64
- [ 0.319876] pci 0000:00:06.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
- [ 0.319918] pci 0000:00:06.0: setting latency timer to 64
- [ 0.319927] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7]
- [ 0.319930] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff]
- [ 0.319934] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
- [ 0.319937] pci_bus 0000:00: resource 7 [mem 0xd8000000-0xdfffffff]
- [ 0.319940] pci_bus 0000:00: resource 8 [mem 0xf0000000-0xffffffff]
- [ 0.319944] pci_bus 0000:01: resource 0 [io 0xd000-0xdfff]
- [ 0.319947] pci_bus 0000:01: resource 1 [mem 0xfe600000-0xfe7fffff]
- [ 0.319950] pci_bus 0000:01: resource 2 [mem 0xf0000000-0xf7ffffff 64bit pref]
- [ 0.319954] pci_bus 0000:02: resource 0 [io 0xe000-0xefff]
- [ 0.319957] pci_bus 0000:02: resource 1 [mem 0xfe800000-0xfe8fffff]
- [ 0.319961] pci_bus 0000:03: resource 1 [mem 0xfe900000-0xfe9fffff]
- [ 0.319964] pci_bus 0000:04: resource 4 [io 0x0000-0x0cf7]
- [ 0.319968] pci_bus 0000:04: resource 5 [io 0x0d00-0xffff]
- [ 0.319971] pci_bus 0000:04: resource 6 [mem 0x000a0000-0x000bffff]
- [ 0.319974] pci_bus 0000:04: resource 7 [mem 0xd8000000-0xdfffffff]
- [ 0.319977] pci_bus 0000:04: resource 8 [mem 0xf0000000-0xffffffff]
- [ 0.320102] NET: Registered protocol family 2
- [ 0.320356] IP route cache hash table entries: 262144 (order: 9, 2097152 bytes)
- [ 0.321426] TCP established hash table entries: 262144 (order: 10, 4194304 bytes)
- [ 0.323170] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
- [ 0.323656] TCP: Hash tables configured (established 262144 bind 65536)
- [ 0.323698] TCP reno registered
- [ 0.323740] UDP hash table entries: 4096 (order: 5, 131072 bytes)
- [ 0.323852] UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes)
- [ 0.324110] NET: Registered protocol family 1
- [ 0.324351] RPC: Registered named UNIX socket transport module.
- [ 0.324407] RPC: Registered udp transport module.
- [ 0.324450] RPC: Registered tcp transport module.
- [ 0.324493] RPC: Registered tcp NFSv4.1 backchannel transport module.
- [ 0.324544] pci 0000:00:01.0: MSI quirk detected; subordinate MSI disabled
- [ 0.324615] pci 0000:00:12.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
- [ 1.155103] pci 0000:00:12.0: PCI INT A disabled
- [ 1.155189] pci 0000:00:12.2: PCI INT B -> GSI 17 (level, low) -> IRQ 17
- [ 1.155274] pci 0000:00:12.2: PCI INT B disabled
- [ 1.155321] pci 0000:00:13.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
- [ 1.228112] pci 0000:00:13.0: PCI INT A disabled
- [ 1.228176] pci 0000:00:13.2: PCI INT B -> GSI 17 (level, low) -> IRQ 17
- [ 1.228261] pci 0000:00:13.2: PCI INT B disabled
- [ 1.228316] pci 0000:00:16.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
- [ 1.301129] pci 0000:00:16.0: PCI INT A disabled
- [ 1.301193] pci 0000:00:16.2: PCI INT B -> GSI 17 (level, low) -> IRQ 17
- [ 1.301278] pci 0000:00:16.2: PCI INT B disabled
- [ 1.301331] pci 0000:01:05.0: Boot video device
- [ 1.301340] PCI: CLS 64 bytes, default 64
- [ 1.301428] Trying to unpack rootfs image as initramfs...
- [ 3.364686] rootfs image is not initramfs (no cpio magic); looks like an initrd
- [ 3.379293] Freeing initrd memory: 5316k freed
- [ 3.381491] PCI-DMA: Disabling AGP.
- [ 3.381679] PCI-DMA: aperture base @ cc000000 size 65536 KB
- [ 3.381719] PCI-DMA: using GART IOMMU.
- [ 3.381760] PCI-DMA: Reserving 64MB of IOMMU area in the AGP aperture
- [ 3.388383] IBS: LVT offset 1 assigned
- [ 3.388453] perf: AMD IBS detected (0x0000001f)
- [ 3.390535] VFS: Disk quotas dquot_6.5.2
- [ 3.390637] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
- [ 3.390931] Registering the id_resolver key type
- [ 3.391214] msgmni has been set to 15732
- [ 3.391306] async_tx: api initialized (async)
- [ 3.391483] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
- [ 3.391528] io scheduler noop registered
- [ 3.391598] io scheduler cfq registered (default)
- [ 3.391851] pcieport 0000:00:04.0: setting latency timer to 64
- [ 3.391890] pcieport 0000:00:04.0: irq 40 for MSI/MSI-X
- [ 3.392153] pcieport 0000:00:06.0: setting latency timer to 64
- [ 3.392187] pcieport 0000:00:06.0: irq 41 for MSI/MSI-X
- [ 3.428093] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
- [ 3.446121] brd: module loaded
- [ 3.446477] Loading iSCSI transport class v2.0-870.
- [ 3.447341] rdac: device handler registered
- [ 3.447721] ahci 0000:00:11.0: version 3.0
- [ 3.447755] ahci 0000:00:11.0: PCI INT A -> GSI 19 (level, low) -> IRQ 19
- [ 3.447852] ahci 0000:00:11.0: irq 42 for MSI/MSI-X
- [ 3.447961] ahci 0000:00:11.0: AHCI 0001.0200 32 slots 6 ports 3 Gbps 0x3f impl SATA mode
- [ 3.448020] ahci 0000:00:11.0: flags: 64bit ncq sntf ilck pm led clo pmp pio slum part sxs
- [ 3.450148] scsi0 : ahci
- [ 3.450700] scsi1 : ahci
- [ 3.451139] scsi2 : ahci
- [ 3.451559] scsi3 : ahci
- [ 3.452031] scsi4 : ahci
- [ 3.452404] scsi5 : ahci
- [ 3.452817] ata1: SATA max UDMA/133 abar m1024@0xfe5ffc00 port 0xfe5ffd00 irq 42
- [ 3.452871] ata2: SATA max UDMA/133 abar m1024@0xfe5ffc00 port 0xfe5ffd80 irq 42
- [ 3.452919] ata3: SATA max UDMA/133 abar m1024@0xfe5ffc00 port 0xfe5ffe00 irq 42
- [ 3.454532] ata4: SATA max UDMA/133 abar m1024@0xfe5ffc00 port 0xfe5ffe80 irq 42
- [ 3.454576] ata5: SATA max UDMA/133 abar m1024@0xfe5ffc00 port 0xfe5fff00 irq 42
- [ 3.454621] ata6: SATA max UDMA/133 abar m1024@0xfe5ffc00 port 0xfe5fff80 irq 42
- [ 3.454663] Enable Synology sata fast booting
- [ 4.388136] Refined TSC clocksource calibration: 1497.506 MHz.
- [ 4.388184] Switching to clocksource tsc
- [ 5.284939] sata_sil24 0000:02:00.0: version 1.1
- [ 5.284959] sata_sil24 0000:02:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
- [ 5.285080] sata_sil24 0000:02:00.0: setting latency timer to 64
- [ 5.286184] scsi6 : sata_sil24
- [ 5.286622] scsi7 : sata_sil24
- [ 5.287079] ata7: SATA max UDMA/100 host m128@0xfe8ffc00 port 0xfe8f8000 irq 16
- [ 5.287130] ata8: SATA max UDMA/100 host m128@0xfe8ffc00 port 0xfe8fa000 irq 16
- [ 5.287174] Enable Synology sata fast booting
- [ 5.388113] ata7: controller in dubious state, performing PORT_RST
- [ 5.511127] ata7: hardreset failed (PHY debouncing failed)
- [ 5.589145] ata5: SATA link down (SStatus 0 SControl 300)
- [ 5.744121] ata4: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
- [ 5.744199] ata3: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
- [ 5.744269] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
- [ 5.744328] ata6: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
- [ 5.744389] ata2: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
- [ 5.744930] ata4.00: ATA-8: ST2000DL003-9VT166, CC98, max UDMA/133
- [ 5.744979] ata4.00: 3907029168 sectors, multi 0: LBA48
- [ 5.745046] ata1.00: ATA-8: ST2000DL001-9VT156, CC96, max UDMA/133
- [ 5.745093] ata1.00: 3907029168 sectors, multi 0: LBA48
- [ 5.745145] ata3.00: ATA-8: ST2000DL001-9VT156, CC96, max UDMA/133
- [ 5.745191] ata3.00: 3907029168 sectors, multi 0: LBA48
- [ 5.745238] ata6.00: ATA-8: ST1500DM003-9YN16G, CC4H, max UDMA/133
- [ 5.745286] ata6.00: 2930277168 sectors, multi 0: LBA48 NCQ (depth 31/32), AA
- [ 5.745682] ata2.00: ATA-8: ST32000542AS, CC35, max UDMA/133
- [ 5.745744] ata2.00: 3907029168 sectors, multi 0: LBA48 NCQ (depth 31/32)
- [ 5.745993] ata4.00: configured for UDMA/133
- [ 5.746066] ata1.00: configured for UDMA/133
- [ 5.746126] ata3.00: configured for UDMA/133
- [ 5.746178] ata6.00: configured for UDMA/133
- [ 5.746798] scsi 0:0:0:0: Direct-Access ATA ST2000DL001-9VT156 CC96 PQ: 0 ANSI: 5
- [ 5.747152] ata2.00: configured for UDMA/133
- [ 5.747219] syno_disk_type_get: SYNO_DISK_SATA
- [ 5.747258] XPENOLOGY DEBUG ; synodisktype : 1
- [ 5.747303] XPENOLOGY DEBUG ; syno_index_get : -2128448786
- [ 5.747342] XPENOLOGY DEBUG ; want_idx : 0
- [ 5.747381] XPENOLOGY while DEBUG ; index : 0
- [ 5.747419] XPENOLOGY while DEBUG ; want_idx : 0
- [ 5.747458] sd_probe: index=0
- [ 5.747496] sd_format_disk_name()=sda
- [ 5.747743] sd 0:0:0:0: [sda] 3907029168 512-byte logical blocks: (2.00 TB/1.81 TiB)
- [ 5.747796] sd 0:0:0:0: [sda] 4096-byte physical blocks
- [ 5.747953] sd 0:0:0:0: [sda] Write Protect is off
- [ 5.747994] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
- [ 5.748025] sd 0:0:0:0: [sda] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA
- [ 5.749291] scsi 1:0:0:0: Direct-Access ATA ST32000542AS CC35 PQ: 0 ANSI: 5
- [ 5.749679] syno_disk_type_get: SYNO_DISK_SATA
- [ 5.749721] XPENOLOGY DEBUG ; synodisktype : 1
- [ 5.749763] XPENOLOGY DEBUG ; syno_index_get : -2128448786
- [ 5.749802] XPENOLOGY DEBUG ; want_idx : 1
- [ 5.749841] XPENOLOGY while DEBUG ; index : 1
- [ 5.749880] XPENOLOGY while DEBUG ; want_idx : 1
- [ 5.749919] sd_probe: index=1
- [ 5.749957] sd_format_disk_name()=sdb
- [ 5.750191] sd 1:0:0:0: [sdb] 3907029168 512-byte logical blocks: (2.00 TB/1.81 TiB)
- [ 5.750287] sd 1:0:0:0: [sdb] Write Protect is off
- [ 5.750328] sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00
- [ 5.750350] sd 1:0:0:0: [sdb] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA
- [ 5.750804] scsi 2:0:0:0: Direct-Access ATA ST2000DL001-9VT156 CC96 PQ: 0 ANSI: 5
- [ 5.751089] syno_disk_type_get: SYNO_DISK_SATA
- [ 5.751129] XPENOLOGY DEBUG ; synodisktype : 1
- [ 5.751172] XPENOLOGY DEBUG ; syno_index_get : -2128448786
- [ 5.751211] XPENOLOGY DEBUG ; want_idx : 2
- [ 5.751250] XPENOLOGY while DEBUG ; index : 2
- [ 5.751289] XPENOLOGY while DEBUG ; want_idx : 2
- [ 5.751328] sd_probe: index=2
- [ 5.751366] sd_format_disk_name()=sdc
- [ 5.751641] sd 2:0:0:0: [sdc] 3907029168 512-byte logical blocks: (2.00 TB/1.81 TiB)
- [ 5.751691] sd 2:0:0:0: [sdc] 4096-byte physical blocks
- [ 5.751789] sd 2:0:0:0: [sdc] Write Protect is off
- [ 5.751831] sd 2:0:0:0: [sdc] Mode Sense: 00 3a 00 00
- [ 5.751856] sd 2:0:0:0: [sdc] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA
- [ 5.752493] scsi 3:0:0:0: Direct-Access ATA ST2000DL003-9VT166 CC98 PQ: 0 ANSI: 5
- [ 5.752813] syno_disk_type_get: SYNO_DISK_SATA
- [ 5.752854] XPENOLOGY DEBUG ; synodisktype : 1
- [ 5.752896] XPENOLOGY DEBUG ; syno_index_get : -2128448786
- [ 5.752935] XPENOLOGY DEBUG ; want_idx : 3
- [ 5.752975] XPENOLOGY while DEBUG ; index : 3
- [ 5.753024] XPENOLOGY while DEBUG ; want_idx : 3
- [ 5.753065] sd_probe: index=3
- [ 5.753104] sd_format_disk_name()=sdd
- [ 5.753382] sd 3:0:0:0: [sdd] 3907029168 512-byte logical blocks: (2.00 TB/1.81 TiB)
- [ 5.753433] sd 3:0:0:0: [sdd] 4096-byte physical blocks
- [ 5.753530] sd 3:0:0:0: [sdd] Write Protect is off
- [ 5.753571] sd 3:0:0:0: [sdd] Mode Sense: 00 3a 00 00
- [ 5.753596] sd 3:0:0:0: [sdd] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA
- [ 5.754132] scsi 5:0:0:0: Direct-Access ATA ST1500DM003-9YN16G CC4H PQ: 0 ANSI: 5
- [ 5.754499] syno_disk_type_get: SYNO_DISK_SATA
- [ 5.754540] XPENOLOGY DEBUG ; synodisktype : 1
- [ 5.754580] XPENOLOGY DEBUG ; syno_index_get : -2128448786
- [ 5.754620] XPENOLOGY DEBUG ; want_idx : 5
- [ 5.754658] XPENOLOGY while DEBUG ; index : 5
- [ 5.754697] XPENOLOGY while DEBUG ; want_idx : 5
- [ 5.754735] sd_probe: index=5
- [ 5.754774] sd_format_disk_name()=sdf
- [ 5.755064] sd 5:0:0:0: [sdf] 2930277168 512-byte logical blocks: (1.50 TB/1.36 TiB)
- [ 5.755115] sd 5:0:0:0: [sdf] 4096-byte physical blocks
- [ 5.755212] sd 5:0:0:0: [sdf] Write Protect is off
- [ 5.755255] sd 5:0:0:0: [sdf] Mode Sense: 00 3a 00 00
- [ 5.755280] sd 5:0:0:0: [sdf] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA
- [ 5.778653] sdf: sdf1 sdf2 sdf3 < sdf5 >
- [ 5.779507] sd 5:0:0:0: [sdf] Attached SCSI disk
- [ 5.792682] sdb: sdb1 sdb2 sdb3 < sdb5 sdb6 >
- [ 5.793873] sd 1:0:0:0: [sdb] Attached SCSI disk
- [ 5.803401] sda: sda1 sda2 sda3 < sda5 sda6 >
- [ 5.803896] sdc: sdc1 sdc2 sdc3 < sdc5 sdc6 >
- [ 5.804421] sd 0:0:0:0: [sda] Attached SCSI disk
- [ 5.804580] sd 2:0:0:0: [sdc] Attached SCSI disk
- [ 5.810136] sdd: sdd1 sdd2 sdd3 < sdd5 sdd6 >
- [ 5.811345] sd 3:0:0:0: [sdd] Attached SCSI disk
- [ 7.532611] pcnet32: pcnet32.c:v1.35 21.Apr.2008 tsbogend@alpha.franken.de
- [ 7.532921] Atheros(R) L2 Ethernet Driver - version 2.2.3
- [ 7.532963] Copyright (c) 2007 Atheros Corporation.
- [ 7.533299] Brocade 10G Ethernet driver - version: 3.0.2.2
- [ 7.533741] e100: Intel(R) PRO/100 Network Driver, 3.5.24-k2-NAPI
- [ 7.533784] e100: Copyright(c) 1999-2006 Intel Corporation
- [ 7.533970] e1000: Intel(R) PRO/1000 Network Driver - version 7.3.21-k8-NAPI
- [ 7.534045] e1000: Copyright (c) 1999-2006 Intel Corporation.
- [ 7.534226] jme: JMicron JMC2XX ethernet driver version 1.0.8
- [ 7.534560] sky2: driver version 1.30
- [ 7.535180] QLogic 1/10 GbE Converged/Intelligent Ethernet Driver v5.0.25
- [ 7.535952] Fusion MPT base driver 3.04.20
- [ 7.535995] Copyright (c) 1999-2008 LSI Corporation
- [ 7.536055] Fusion MPT SPI Host driver 3.04.20
- [ 7.536223] Fusion MPT SAS Host driver 3.04.20
- [ 7.536648] i8042: PNP: No PS/2 controller found. Probing ports directly.
- [ 8.567891] i8042: No controller found
- [ 8.568070] rtc_cmos 00:03: RTC can wake from S4
- [ 8.568333] rtc_cmos 00:03: rtc core: registered rtc_cmos as rtc0
- [ 8.568408] rtc0: alarms up to one month, y3k, 114 bytes nvram, hpet irqs
- [ 8.568573] i2c /dev entries driver
- [ 8.569180] md: linear personality registered for level -1
- [ 8.569223] md: raid0 personality registered for level 0
- [ 8.569262] md: raid1 personality registered for level 1
- [ 8.569302] md: raid10 personality registered for level 10
- [ 8.569342] md: raid6 personality registered for level 6
- [ 8.569381] md: raid5 personality registered for level 5
- [ 8.569421] md: raid4 personality registered for level 4
- [ 8.569625] device-mapper: ioctl: 4.22.0-ioctl (2011-10-19) initialised: dm-devel@redhat.com
- [ 8.569671] cpuidle: using governor ladder
- [ 8.569709] cpuidle: using governor menu
- [ 8.570090] TCP cubic registered
- [ 8.570129] NET: Registered protocol family 17
- [ 8.570183] Registering the dns_resolver key type
- [ 8.571327] rtc_cmos 00:03: setting system clock to 2014-02-23 18:55:30 UTC (1393181730)
- [ 10.093124] ata7: SATA link up 3.0 Gbps (SStatus 123 SControl 0)
- [ 10.093442] ata7.15: failed to configure Port Multiplier (failed to write Sil3726 Private Register, Emask=0x1)
- [ 14.225137] ata7: SATA link up 3.0 Gbps (SStatus 123 SControl 0)
- [ 14.225485] ata7.15: failed to configure Port Multiplier (failed to write Sil3726 Private Register, Emask=0x1)
- [ 14.225538] ata7: limiting SATA link speed to 1.5 Gbps
- [ 18.357136] ata7: SATA link up 1.5 Gbps (SStatus 113 SControl 10)
- [ 18.357509] ata7.15: failed to configure Port Multiplier (failed to write Sil3726 Private Register, Emask=0x1)
- [ 22.489124] ata7: SATA link up 1.5 Gbps (SStatus 113 SControl 10)
- [ 24.509132] ata8: SATA link down (SStatus 0 SControl 0)
- [ 24.509262] md: Waiting for all devices to be available before autodetect
- [ 24.510858] md: If you don't use raid, use raid=noautodetect
- [ 24.511274] md: Autodetecting XPEnology RAID arrays.
- [ 24.532961] blDenyDisks: ALLOW
- [ 24.538075] blDenyDisks: ALLOW
- [ 24.563415] md: invalid raid superblock magic on sda5
- [ 24.563461] md: sda5 does not have a valid v0.90 superblock, not importing!
- [ 24.585023] md: invalid raid superblock magic on sda6
- [ 24.585069] md: sda6 does not have a valid v0.90 superblock, not importing!
- [ 24.601466] blDenyDisks: ALLOW
- [ 24.609969] blDenyDisks: ALLOW
- [ 24.628430] md: invalid raid superblock magic on sdb5
- [ 24.628476] md: sdb5 does not have a valid v0.90 superblock, not importing!
- [ 24.638651] md: invalid raid superblock magic on sdb6
- [ 24.638696] md: sdb6 does not have a valid v0.90 superblock, not importing!
- [ 24.661671] blDenyDisks: ALLOW
- [ 24.666848] blDenyDisks: ALLOW
- [ 24.688965] md: invalid raid superblock magic on sdc5
- [ 24.689019] md: sdc5 does not have a valid v0.90 superblock, not importing!
- [ 24.713246] md: invalid raid superblock magic on sdc6
- [ 24.713291] md: sdc6 does not have a valid v0.90 superblock, not importing!
- [ 24.732181] blDenyDisks: ALLOW
- [ 24.740888] blDenyDisks: ALLOW
- [ 24.761235] md: invalid raid superblock magic on sdd5
- [ 24.761281] md: sdd5 does not have a valid v0.90 superblock, not importing!
- [ 24.777389] md: invalid raid superblock magic on sdd6
- [ 24.777435] md: sdd6 does not have a valid v0.90 superblock, not importing!
- [ 24.794205] blDenyDisks: ALLOW
- [ 24.801315] blDenyDisks: ALLOW
- [ 24.825350] md: invalid raid superblock magic on sdf5
- [ 24.825395] md: sdf5 does not have a valid v0.90 superblock, not importing!
- [ 24.825454] md: Scanned 19 and added 10 devices.
- [ 24.825493] md: autorun ...
- [ 24.825531] md: considering sda1 ...
- [ 24.825578] md: adding sda1 ...
- [ 24.825619] md: sda2 has different UUID to sda1
- [ 24.825661] md: adding sdb1 ...
- [ 24.825701] md: sdb2 has different UUID to sda1
- [ 24.825744] md: adding sdc1 ...
- [ 24.825784] md: sdc2 has different UUID to sda1
- [ 24.825827] md: adding sdd1 ...
- [ 24.825867] md: sdd2 has different UUID to sda1
- [ 24.825909] md: adding sdf1 ...
- [ 24.825950] md: sdf2 has different UUID to sda1
- [ 24.826022] md: created md0
- [ 24.826061] md: bind<sdf1>
- [ 24.826120] md: bind<sdd1>
- [ 24.826169] md: bind<sdc1>
- [ 24.826218] md: bind<sdb1>
- [ 24.826267] md: bind<sda1>
- [ 24.826315] md: running: <sda1><sdb1><sdc1><sdd1><sdf1>
- [ 24.826740] bio: create slab <bio-1> at 1
- [ 24.826978] md/raid1:md0: active with 5 out of 12 mirrors
- [ 24.827081] md0: detected capacity change from 0 to 2549940224
- [ 24.827272] md: considering sda2 ...
- [ 24.827319] md: adding sda2 ...
- [ 24.827362] md: adding sdb2 ...
- [ 24.827403] md: adding sdc2 ...
- [ 24.827445] md: adding sdd2 ...
- [ 24.827486] md: adding sdf2 ...
- [ 24.827925] md: created md1
- [ 24.827970] md: bind<sdf2>
- [ 24.828028] md: bind<sdd2>
- [ 24.828080] md: bind<sdc2>
- [ 24.828131] md: bind<sdb2>
- [ 24.828181] md: bind<sda2>
- [ 24.828230] md: running: <sda2><sdb2><sdc2><sdd2><sdf2>
- [ 24.828886] md/raid1:md1: active with 5 out of 12 mirrors
- [ 24.828983] md1: detected capacity change from 0 to 2147418112
- [ 24.829137] md: ... autorun DONE.
- [ 24.829565] md1: unknown partition table
- [ 24.829950] RAMDISK: lzma image found at block 0
- [ 26.880248] VFS: Mounted root (ext2 filesystem) on device 1:0.
- [ 26.893289] Loading modules backported from Linux version v3.12-0-g5e01dc7
- [ 26.893340] Backport generated by backports.git v3.12-1-0-g9ae6b6c
- [ 26.900821] e1000e: Intel(R) PRO/1000 Network Driver - 2.5.4-NAPI
- [ 26.900903] e1000e: Copyright(c) 1999 - 2013 Intel Corporation.
- [ 26.906871] tg3.c:v3.133d (August 07, 2013)
- [ 26.906873]
- [ 26.906977] tg3 0000:03:00.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
- [ 26.907033] tg3 0000:03:00.0: setting latency timer to 64
- [ 26.964311] pcieport 0000:00:06.0: eth0: Tigon3 [partno(BCM95723) rev 5784100] (PCI Express) MAC address e4:11:5b:12:b3:75
- [ 26.964400] pcieport 0000:00:06.0: eth0: attached PHY is 5784 (10/100/1000Base-T Ethernet) (WireSpeed[1], EEE[0])
- [ 26.964447] pcieport 0000:00:06.0: eth0: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[0] TSOcap[1]
- [ 26.964491] pcieport 0000:00:06.0: eth0: dma_rwctrl[76180000] dma_mask[64-bit]
- [ 26.986130] bromolow_synobios: module license 'Synology Inc.' taints kernel.
- [ 26.986213] Disabling lock debugging due to kernel taint
- [ 26.987392] synobios: load, major number 201
- [ 26.987435] Brand: Synology
- [ 26.987538] Model: DS-3612xs
- [ 26.987610] set group disks wakeup number to 4, spinup time deno 7
- [ 26.998229] synobios: unload
- [ 27.043655] md0: unknown partition table
- [ 27.587268] EXT4-fs (md0): synoacl module has not been loaded. Unable to mount with synoacl, vfs_mod status=-1, ext4_mod status=-1
- [ 27.588154] EXT4-fs (md0): barriers disabled
- [ 27.602977] EXT4-fs (md0): mounted filesystem with ordered data mode. Opts:
- [ 28.035611] synoacl module [synoacl_ext4] is not loaded
- [ 28.035657] synoacl module [synoacl_vfs] is not loaded
- [ 28.051272] EXT3-fs (md0): error: couldn't mount because of unsupported optional features (2c0)
- [ 28.056343] EXT4-fs (md0): synoacl module has not been loaded. Unable to mount with synoacl, vfs_mod status=-1, ext4_mod status=-1
- [ 28.062800] EXT4-fs (md0): mounted filesystem with ordered data mode. Opts: barrier=1
- [ 28.062869] VFS: Mounted root (ext4 filesystem) readonly on device 9:0.
- [ 28.062910] Trying to move old root to /initrd ... okay
- [ 28.065180] Freeing unused kernel memory: 444k freed
- [ 28.065383] Write protecting the kernel read-only data: 6144k
- [ 28.066183] Freeing unused kernel memory: 128k freed
- [ 28.068684] Freeing unused kernel memory: 496k freed
- [ 28.381881] EXT4-fs (md0): re-mounted. Opts: (null)
- [ 30.272563] sd 0:0:0:0: Attached scsi generic sg0 type 0
- [ 30.272852] sd 1:0:0:0: Attached scsi generic sg1 type 0
- [ 30.273190] sd 2:0:0:0: Attached scsi generic sg2 type 0
- [ 30.273813] sd 3:0:0:0: Attached scsi generic sg3 type 0
- [ 30.273952] sd 5:0:0:0: Attached scsi generic sg4 type 0
- [ 30.492857] Adding 2097084k swap on /dev/md1. Priority:-1 extents:1 across:2097084k
- [ 30.563933] NET: Registered protocol family 10
- [ 30.634170] usbcore: registered new interface driver usbfs
- [ 30.636526] usbcore: registered new interface driver hub
- [ 30.640652] usbcore: registered new interface driver ethub
- [ 30.643526] usbcore: registered new device driver usb
- [ 30.738833] ACPI: processor limited to max C-state 1
- [ 31.016846] Intel AES-NI instructions are not detected.
- [ 31.044483] fuse init (API version 7.17)
- [ 31.053323] dca service started, version 1.12.1
- [ 31.082793] Intel(R) Gigabit Ethernet Network Driver - version 5.0.6
- [ 31.082844] Copyright (c) 2007-2013 Intel Corporation.
- [ 31.104726] ixgbe: Intel(R) 10 Gigabit PCI Express Network Driver - version 3.6.7-k
- [ 31.104779] ixgbe: Copyright (c) 1999-2011 Intel Corporation.
- [ 31.157156] Btrfs loaded
- [ 31.205427] synobios: load, major number 201
- [ 31.205474] Brand: Synology
- [ 31.205577] Model: DS-3612xs
- [ 31.205650] set group disks wakeup number to 4, spinup time deno 7
- [ 31.615376] tg3 0000:03:00.0: irq 43 for MSI/MSI-X
- [ 32.413951] ADDRCONF(NETDEV_UP): eth0: link is not ready
- [ 34.179988] md: md2 stopped.
- [ 34.240059] md: bind<sdb5>
- [ 34.248971] md: bind<sdc5>
- [ 34.250173] md: bind<sdd5>
- [ 34.250474] md: bind<sdf5>
- [ 34.250801] md: bind<sda5>
- [ 34.251832] md/raid:md2: device sda5 operational as raid disk 0
- [ 34.251874] md/raid:md2: device sdf5 operational as raid disk 4
- [ 34.251914] md/raid:md2: device sdd5 operational as raid disk 3
- [ 34.251954] md/raid:md2: device sdc5 operational as raid disk 2
- [ 34.251995] md/raid:md2: device sdb5 operational as raid disk 1
- [ 34.252557] md/raid:md2: allocated 6386kB
- [ 34.252671] md/raid:md2: raid level 5 active with 5 out of 6 devices, algorithm 2
- [ 34.252720] RAID conf printout:
- [ 34.252723] --- level:5 rd:6 wd:5
- [ 34.252727] disk 0, o:1, dev:sda5
- [ 34.252730] disk 1, o:1, dev:sdb5
- [ 34.252734] disk 2, o:1, dev:sdc5
- [ 34.252736] disk 3, o:1, dev:sdd5
- [ 34.252739] disk 4, o:1, dev:sdf5
- [ 34.252806] md2: detected capacity change from 0 to 7477266677760
- [ 34.265082] md2: unknown partition table
- [ 34.288523] md: md3 stopped.
- [ 34.290432] md: bind<sdb6>
- [ 34.290626] md: bind<sdc6>
- [ 34.290800] md: bind<sdd6>
- [ 34.290978] md: bind<sda6>
- [ 34.292806] md/raid:md3: device sda6 operational as raid disk 0
- [ 34.292887] md/raid:md3: device sdd6 operational as raid disk 3
- [ 34.292928] md/raid:md3: device sdc6 operational as raid disk 2
- [ 34.292968] md/raid:md3: device sdb6 operational as raid disk 1
- [ 34.293462] md/raid:md3: allocated 5334kB
- [ 34.295079] md/raid:md3: raid level 5 active with 4 out of 5 devices, algorithm 2
- [ 34.295159] RAID conf printout:
- [ 34.295162] --- level:5 rd:5 wd:4
- [ 34.295165] disk 0, o:1, dev:sda6
- [ 34.295168] disk 1, o:1, dev:sdb6
- [ 34.295171] disk 2, o:1, dev:sdc6
- [ 34.295174] disk 3, o:1, dev:sdd6
- [ 34.295220] md3: detected capacity change from 0 to 2000350347264
- [ 34.354414] md3: unknown partition table
- [ 34.779536] pcieport 0000:00:06.0: eth0: Link is up at 1000 Mbps, full duplex
- [ 34.779587] pcieport 0000:00:06.0: eth0: Flow control is on for TX and on for RX
- [ 34.782236] ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
- [ 37.109523] EXT4-fs (dm-1): barriers disabled
- [ 37.967534] EXT4-fs (dm-1): mounted filesystem with writeback data mode. Opts: usrjquota=aquota.user,grpjquota=aquota.group,jqfmt=vfsv0,synoacl,data=writeback,oldalloc
- [ 38.945054] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
- [ 38.945148] ehci_hcd 0000:00:12.2: PCI INT B -> GSI 17 (level, low) -> IRQ 17
- [ 38.945292] ehci_hcd 0000:00:12.2: EHCI Host Controller
- [ 38.945365] ehci_hcd 0000:00:12.2: new USB bus registered, assigned bus number 1
- [ 38.945416] ehci_hcd 0000:00:12.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround
- [ 38.945485] QUIRK: Enable AMD PLL fix
- [ 38.945499] ehci_hcd 0000:00:12.2: debug port 1
- [ 38.945611] ehci_hcd 0000:00:12.2: irq 17, io mem 0xfe5ff800
- [ 38.952104] ehci_hcd 0000:00:12.2: USB 2.0 started, EHCI 1.00
- [ 38.952727] hub 1-0:1.0: USB hub found
- [ 38.952811] hub 1-0:1.0: 5 ports detected
- [ 38.953564] ehci_hcd 0000:00:13.2: PCI INT B -> GSI 17 (level, low) -> IRQ 17
- [ 38.953637] ehci_hcd 0000:00:13.2: EHCI Host Controller
- [ 38.953685] ehci_hcd 0000:00:13.2: new USB bus registered, assigned bus number 2
- [ 38.953736] ehci_hcd 0000:00:13.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround
- [ 38.953804] ehci_hcd 0000:00:13.2: debug port 1
- [ 38.953858] ehci_hcd 0000:00:13.2: irq 17, io mem 0xfe5ff400
- [ 38.959053] ehci_hcd 0000:00:13.2: USB 2.0 started, EHCI 1.00
- [ 38.960787] hub 2-0:1.0: USB hub found
- [ 38.960872] hub 2-0:1.0: 5 ports detected
- [ 38.962370] ehci_hcd 0000:00:16.2: PCI INT B -> GSI 17 (level, low) -> IRQ 17
- [ 38.962454] ehci_hcd 0000:00:16.2: EHCI Host Controller
- [ 38.962505] ehci_hcd 0000:00:16.2: new USB bus registered, assigned bus number 3
- [ 38.962556] ehci_hcd 0000:00:16.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround
- [ 38.962629] ehci_hcd 0000:00:16.2: debug port 1
- [ 38.962687] ehci_hcd 0000:00:16.2: irq 17, io mem 0xfe5ff000
- [ 38.968068] ehci_hcd 0000:00:16.2: USB 2.0 started, EHCI 1.00
- [ 38.975284] hub 3-0:1.0: USB hub found
- [ 38.975372] hub 3-0:1.0: 4 ports detected
- [ 39.025217] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
- [ 39.025345] ohci_hcd 0000:00:12.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
- [ 39.025428] ohci_hcd 0000:00:12.0: OHCI Host Controller
- [ 39.025484] ohci_hcd 0000:00:12.0: new USB bus registered, assigned bus number 4
- [ 39.025569] ohci_hcd 0000:00:12.0: irq 18, io mem 0xfe5fe000
- [ 39.081779] hub 4-0:1.0: USB hub found
- [ 39.081867] hub 4-0:1.0: 5 ports detected
- [ 39.085413] ohci_hcd 0000:00:13.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
- [ 39.085498] ohci_hcd 0000:00:13.0: OHCI Host Controller
- [ 39.085548] ohci_hcd 0000:00:13.0: new USB bus registered, assigned bus number 5
- [ 39.085613] ohci_hcd 0000:00:13.0: irq 18, io mem 0xfe5fd000
- [ 39.151027] hub 5-0:1.0: USB hub found
- [ 39.151088] hub 5-0:1.0: 5 ports detected
- [ 39.157296] ohci_hcd 0000:00:16.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
- [ 39.157380] ohci_hcd 0000:00:16.0: OHCI Host Controller
- [ 39.157429] ohci_hcd 0000:00:16.0: new USB bus registered, assigned bus number 6
- [ 39.157496] ohci_hcd 0000:00:16.0: irq 18, io mem 0xfe5fc000
- [ 39.220797] hub 6-0:1.0: USB hub found
- [ 39.220888] hub 6-0:1.0: 4 ports detected
- [ 39.355125] usb 2-3: new high-speed USB device number 3 using ehci_hcd
- [ 39.559231] uhci_hcd: USB Universal Host Controller Interface driver
- [ 39.661027] usb 5-1: new low-speed USB device number 2 using ohci_hcd
- [ 39.680863] Initializing USB Mass Storage driver...
- [ 39.707700] scsi8 : usb-storage 2-3:1.0
- [ 39.746911] usbcore: registered new interface driver usb-storage
- [ 39.746993] USB Mass Storage support registered.
- [ 39.822105] Got empty serial number. Generate serial number from product.
- [ 39.906106] usbcore: registered new interface driver usblp
- [ 40.179671] input: NOVATEK USB Keyboard as /devices/pci0000:00/0000:00:13.0/usb5/5-1/5-1:1.0/input/input0
- [ 40.179785] generic-usb 0003:0461:0010.0001: input: USB HID v1.10 Keyboard [NOVATEK USB Keyboard] on usb-0000:00:13.0-1/input0
- [ 40.210278] input: NOVATEK USB Keyboard as /devices/pci0000:00/0000:00:13.0/usb5/5-1/5-1:1.1/input/input1
- [ 40.210348] Get empty minor:104
- [ 40.226297] generic-usb 0003:0461:0010.0002: input,hiddev0: USB HID v1.10 Device [NOVATEK USB Keyboard] on usb-0000:00:13.0-1/input1
- [ 40.237352] usbcore: registered new interface driver usbhid
- [ 40.237403] usbhid: USB HID core driver
- [ 40.733488] scsi 8:0:0:0: Direct-Access PMAP PQ: 0 ANSI: 4
- [ 40.735303] syno_disk_type_get: SYNO_DISK_USB
- [ 40.735346] XPENOLOGY DEBUG ; synodisktype : 2
- [ 40.735387] XPENOLOGY while DEBUG ; index : 20
- [ 40.735426] XPENOLOGY while DEBUG ; want_idx : 20
- [ 40.735465] sd_probe: index=20
- [ 40.735503] sd_format_disk_name()=sdu
- [ 40.737827] sd 8:0:0:0: [sdu] 7831552 512-byte logical blocks: (4.00 GB/3.73 GiB)
- [ 40.739323] sd 8:0:0:0: [sdu] Write Protect is off
- [ 40.739368] sd 8:0:0:0: [sdu] Mode Sense: 23 00 00 00
- [ 40.740821] sd 8:0:0:0: [sdu] No Caching mode page present
- [ 40.740864] sd 8:0:0:0: [sdu] Assuming drive cache: write through
- [ 40.741900] sd 8:0:0:0: Attached scsi generic sg5 type 0
- [ 40.749332] sd 8:0:0:0: [sdu] No Caching mode page present
- [ 40.749379] sd 8:0:0:0: [sdu] Assuming drive cache: write through
- [ 40.750703] sdu: sdu1
- [ 40.760193] sd 8:0:0:0: [sdu] No Caching mode page present
- [ 40.760240] sd 8:0:0:0: [sdu] Assuming drive cache: write through
- [ 40.760282] sd 8:0:0:0: [sdu] Attached SCSI removable disk
- [ 44.298270] netlink: 12 bytes leftover after parsing attributes.
- [ 45.618041] eth0: no IPv6 routers present
- [ 45.842053] EXT4-fs (sdu1): mounted filesystem without journal. Opts: nodelalloc,synoacl,data=ordered,oldalloc
- [ 45.844628] ata1.00: configured for UDMA/133
- [ 45.844679] ata1: EH complete
- [ 45.844861] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
- [ 45.845720] ata3.00: configured for UDMA/133
- [ 45.845770] ata3: EH complete
- [ 45.845978] sd 2:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
- [ 45.846061] ata4.00: configured for UDMA/133
- [ 45.846103] ata4: EH complete
- [ 45.846269] sd 3:0:0:0: [sdd] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
- [ 45.846440] ata2.00: configured for UDMA/133
- [ 45.846489] ata2: EH complete
- [ 45.846669] sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
- [ 45.850755] ata6.00: configured for UDMA/133
- [ 45.850809] ata6: EH complete
- [ 45.851021] sd 5:0:0:0: [sdf] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
- [ 52.585510] loop: module loaded
- [ 53.505102] findhostd uses obsolete (PF_INET,SOCK_PACKET)
Advertisement
Add Comment
Please, Sign In to add comment
Advertisement