Advertisement
pfeerick

xenial-minimal-rock64-0.5.15-136-arm64.img

May 28th, 2018
540
0
Never
Not a member of Pastebin yet? Sign Up, it unlocks many cool features!
text 46.79 KB | None | 0 0
  1. ## Notes ##
  2. Rock64 v2.0, 4GB, SPI and eMMC disabled, xenial-minimal-rock64-0.5.15-136-arm64.img
  3.  
  4. ## Power connect ##
  5. DDR version 1.06 20170424
  6. In
  7. LPDDR3
  8. 786MHz
  9. Bus Width=32 Col=11 Bank=8 Row=15/15 CS=2 Die Bus-Width=32 Size=4096MB
  10. ddrconfig:7
  11. OUT
  12. Boot1 Release Time: 2017-05-18, version: 2.43
  13. ChipType = 0x11, 127
  14. emmc reinit
  15. emmc reinit
  16. SdmmcInit=2 20
  17. SdmmcInit=0 0
  18. BootCapSize=0
  19. UserCapSize=15247MB
  20. FwPartOffset=2000 , 0
  21. StorageInit ok = 48365
  22. Raw SecureMode = 0
  23. SecureInit read PBA: 0x4
  24. SecureInit read PBA: 0x404
  25. SecureInit read PBA: 0x804
  26. SecureInit read PBA: 0xc04
  27. SecureInit read PBA: 0x1004
  28. SecureInit ret = 0, SecureMode = 0
  29. LoadTrustBL
  30. No find bl30.bin
  31. No find bl32.bin
  32. Load uboot, ReadLba = 2000
  33. Load OK, addr=0x200000, size=0x92d74
  34. RunBL31 0x10000
  35. NOTICE: BL31: v1.3(debug):f947c7e
  36. NOTICE: BL31: Built : 09:28:45, May 31 2017
  37. NOTICE: BL31:Rockchip release version: v1.3
  38. INFO: ARM GICv2 driver initialized
  39. INFO: Using opteed sec cpu_context!
  40. INFO: boot cpu mask: 1
  41. INFO: plat_rockchip_pmu_init: pd status 0xe
  42. INFO: BL31: Initializing runtime services
  43. WARNING: No OPTEE provided by BL2 boot loader, Booting device without OPTEE initialization. SMC`s destined for OPTEE will return SMC_UNK
  44. ERROR: Error initializing runtime service opteed_fast
  45. INFO: BL31: Preparing for EL3 exit to normal world
  46. INFO: Entry point address = 0x200000
  47. INFO: SPSR = 0x3c9
  48.  
  49.  
  50. U-Boot 2017.09-g5aef9f7 (Oct 12 2017 - 09:11:39 +0000), Build: jenkins-linux-build-rock-64-136
  51.  
  52. Model: Pine64 Rock64
  53. DRAM: 4 GiB
  54. MMC: rksdmmc@ff500000: 1, rksdmmc@ff520000: 0
  55. *** Warning - bad CRC, using default environment
  56.  
  57. In: serial@ff130000
  58. Out: serial@ff130000
  59. Err: serial@ff130000
  60. Model: Pine64 Rock64
  61. Net: eth0: ethernet@ff540000
  62. Hit any key to stop autoboot: 2  1  0
  63. Card did not respond to voltage select!
  64. mmc_init: -95, time 9
  65. switch to partitions #0, OK
  66. mmc1 is current device
  67. Scanning mmc 1:6...
  68. Found /extlinux/extlinux.conf
  69. Retrieving file: /extlinux/extlinux.conf
  70. reading /extlinux/extlinux.conf
  71. 259 bytes read in 4 ms (62.5 KiB/s)
  72. 1: kernel-4.4
  73. Retrieving file: /initrd.img
  74. reading /initrd.img
  75. 3504483 bytes read in 158 ms (21.2 MiB/s)
  76. Retrieving file: /Image
  77. reading /Image
  78. 18606088 bytes read in 815 ms (21.8 MiB/s)
  79. append: earlycon=uart8250,mmio32,0xff130000 rw root=LABEL=linux-root rootwait rootfstype=ext4 init=/sbin/init coherent_pool=1M ethaddr=52:aa:d9:e3:ea:07 eth1addr=52:aa:d9:e3:ea:27 serial=efc659775797323
  80. Retrieving file: /dtb
  81. reading /dtb
  82. 42707 bytes read in 6 ms (6.8 MiB/s)
  83. ## Flattened Device Tree blob at 01f00000
  84. Booting using the fdt blob at 0x1f00000
  85. Loading Ramdisk to fcbc2000, end fcf19963 ... OK
  86. Loading Device Tree to 00000000fcbb4000, end 00000000fcbc16d2 ... OK
  87.  
  88. Starting kernel ...
  89.  
  90. [ 0.000000] Booting Linux on physical CPU 0x0
  91. [ 0.000000] Initializing cgroup subsys cpuset
  92. [ 0.000000] Initializing cgroup subsys cpu
  93. [ 0.000000] Initializing cgroup subsys cpuacct
  94. [ 0.000000] Linux version 4.4.77-rockchip-ayufan-136 (root@713b8312374e) (gcc version 5.4.0 20160609 (Ubuntu/Linaro 5.4.0-6ubuntu1~16.04.4) ) #1 SMP Thu Oct 12 09:14:48 UTC 2017
  95. [ 0.000000] Boot CPU: AArch64 Processor [410fd034]
  96. [ 0.000000] earlycon: Early serial console at MMIO32 0xff130000 (options '')
  97. [ 0.000000] bootconsole [uart0] enabled
  98. [ 0.000000] psci: probing for conduit method from DT.
  99. [ 0.000000] psci: PSCIv1.0 detected in firmware.
  100. [ 0.000000] psci: Using standard PSCI v0.2 function IDs
  101. [ 0.000000] psci: MIGRATE_INFO_TYPE not supported.
  102. [ 0.000000] PERCPU: Embedded 21 pages/cpu @ffffffc0fef39000 s46504 r8192 d31320 u86016
  103. [ 0.000000] Detected VIPT I-cache on CPU0
  104. [ 0.000000] CPU features: enabling workaround for ARM erratum 845719
  105. [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 1027656
  106. [ 0.000000] Kernel command line: earlycon=uart8250,mmio32,0xff130000 rw root=LABEL=linux-root rootwait rootfstype=ext4 init=/sbin/init coherent_pool=1M ethaddr=52:aa:d9:e3:ea:07 eth1addr=52:aa:d9:e3:ea:27 serial=efc659775797323
  107. [ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
  108. [ 0.000000] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes)
  109. [ 0.000000] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes)
  110. [ 0.000000] software IO TLB [mem 0xf6000000-0xfa000000] (64MB) mapped at [ffffffc0f6000000-ffffffc0f9ffffff]
  111. [ 0.000000] Memory: 4015000K/4175872K available (11390K kernel code, 1466K rwdata, 4124K rodata, 1152K init, 747K bss, 160872K reserved, 0K cma-reserved)
  112. [ 0.000000] Virtual kernel memory layout:
  113. [ 0.000000] modules : 0xffffff8000000000 - 0xffffff8008000000 ( 128 MB)
  114. [ 0.000000] vmalloc : 0xffffff8008000000 - 0xffffffbdbfff0000 ( 246 GB)
  115. [ 0.000000] .init : 0xffffff8008fb0000 - 0xffffff80090d0000 ( 1152 KB)
  116. [ 0.000000] .text : 0xffffff8008080000 - 0xffffff8008ba0000 ( 11392 KB)
  117. [ 0.000000] .rodata : 0xffffff8008ba0000 - 0xffffff8008fb0000 ( 4160 KB)
  118. [ 0.000000] .data : 0xffffff80090d0000 - 0xffffff800923e808 ( 1467 KB)
  119. [ 0.000000] vmemmap : 0xffffffbdc0000000 - 0xffffffbfc0000000 ( 8 GB maximum)
  120. [ 0.000000] 0xffffffbdc0008000 - 0xffffffbdc3fc0000 ( 63 MB actual)
  121. [ 0.000000] fixed : 0xffffffbffe7fd000 - 0xffffffbffec00000 ( 4108 KB)
  122. [ 0.000000] PCI I/O : 0xffffffbffee00000 - 0xffffffbfffe00000 ( 16 MB)
  123. [ 0.000000] memory : 0xffffffc000200000 - 0xffffffc0ff000000 ( 4078 MB)
  124. [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
  125. [ 0.000000] Hierarchical RCU implementation.
  126. [ 0.000000] Build-time adjustment of leaf fanout to 64.
  127. [ 0.000000] RCU restricting CPUs from NR_CPUS=8 to nr_cpu_ids=4.
  128. [ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=64, nr_cpu_ids=4
  129. [ 0.000000] NR_IRQS:64 nr_irqs:64 0
  130. [ 0.000000] GIC: Using split EOI/Deactivate mode
  131. [ 0.000000] Architected cp15 timer(s) running at 24.00MHz (phys).
  132. [ 0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x588fe9dc0, max_idle_ns: 440795202592 ns
  133. [ 0.000006] sched_clock: 56 bits at 24MHz, resolution 41ns, wraps every 4398046511097ns
  134. [ 0.001588] Console: colour dummy device 80x25
  135. [ 0.001998] console [tty0] enabled
  136. [ 0.002319] bootconsole [uart0] disabled
  137. <hit enter to activate fiq debugger>
  138. [ 0.000000] Booting Linux on physical CPU 0x0
  139. [ 0.000000] Initializing cgroup subsys cpuset
  140. [ 0.000000] Initializing cgroup subsys cpu
  141. [ 0.000000] Initializing cgroup subsys cpuacct
  142. [ 0.000000] Linux version 4.4.77-rockchip-ayufan-136 (root@713b8312374e) (gcc version 5.4.0 20160609 (Ubuntu/Linaro 5.4.0-6ubuntu1~16.04.4) ) #1 SMP Thu Oct 12 09:14:48 UTC 2017
  143. [ 0.000000] Boot CPU: AArch64 Processor [410fd034]
  144. [ 0.000000] earlycon: Early serial console at MMIO32 0xff130000 (options '')
  145. [ 0.000000] bootconsole [uart0] enabled
  146. [ 0.000000] psci: probing for conduit method from DT.
  147. [ 0.000000] psci: PSCIv1.0 detected in firmware.
  148. [ 0.000000] psci: Using standard PSCI v0.2 function IDs
  149. [ 0.000000] psci: MIGRATE_INFO_TYPE not supported.
  150. [ 0.000000] PERCPU: Embedded 21 pages/cpu @ffffffc0fef39000 s46504 r8192 d31320 u86016
  151. [ 0.000000] Detected VIPT I-cache on CPU0
  152. [ 0.000000] CPU features: enabling workaround for ARM erratum 845719
  153. [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 1027656
  154. [ 0.000000] Kernel command line: earlycon=uart8250,mmio32,0xff130000 rw root=LABEL=linux-root rootwait rootfstype=ext4 init=/sbin/init coherent_pool=1M ethaddr=52:aa:d9:e3:ea:07 eth1addr=52:aa:d9:e3:ea:27 serial=efc659775797323
  155. [ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
  156. [ 0.000000] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes)
  157. [ 0.000000] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes)
  158. [ 0.000000] software IO TLB [mem 0xf6000000-0xfa000000] (64MB) mapped at [ffffffc0f6000000-ffffffc0f9ffffff]
  159. [ 0.000000] Memory: 4015000K/4175872K available (11390K kernel code, 1466K rwdata, 4124K rodata, 1152K init, 747K bss, 160872K reserved, 0K cma-reserved)
  160. [ 0.000000] Virtual kernel memory layout:
  161. [ 0.000000] modules : 0xffffff8000000000 - 0xffffff8008000000 ( 128 MB)
  162. [ 0.000000] vmalloc : 0xffffff8008000000 - 0xffffffbdbfff0000 ( 246 GB)
  163. [ 0.000000] .init : 0xffffff8008fb0000 - 0xffffff80090d0000 ( 1152 KB)
  164. [ 0.000000] .text : 0xffffff8008080000 - 0xffffff8008ba0000 ( 11392 KB)
  165. [ 0.000000] .rodata : 0xffffff8008ba0000 - 0xffffff8008fb0000 ( 4160 KB)
  166. [ 0.000000] .data : 0xffffff80090d0000 - 0xffffff800923e808 ( 1467 KB)
  167. [ 0.000000] vmemmap : 0xffffffbdc0000000 - 0xffffffbfc0000000 ( 8 GB maximum)
  168. [ 0.000000] 0xffffffbdc0008000 - 0xffffffbdc3fc0000 ( 63 MB actual)
  169. [ 0.000000] fixed : 0xffffffbffe7fd000 - 0xffffffbffec00000 ( 4108 KB)
  170. [ 0.000000] PCI I/O : 0xffffffbffee00000 - 0xffffffbfffe00000 ( 16 MB)
  171. [ 0.000000] memory : 0xffffffc000200000 - 0xffffffc0ff000000 ( 4078 MB)
  172. [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
  173. [ 0.000000] Hierarchical RCU implementation.
  174. [ 0.000000] Build-time adjustment of leaf fanout to 64.
  175. [ 0.000000] RCU restricting CPUs from NR_CPUS=8 to nr_cpu_ids=4.
  176. [ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=64, nr_cpu_ids=4
  177. [ 0.000000] NR_IRQS:64 nr_irqs:64 0
  178. [ 0.000000] GIC: Using split EOI/Deactivate mode
  179. [ 0.000000] Architected cp15 timer(s) running at 24.00MHz (phys).
  180. [ 0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x588fe9dc0, max_idle_ns: 440795202592 ns
  181. [ 0.000006] sched_clock: 56 bits at 24MHz, resolution 41ns, wraps every 4398046511097ns
  182. [ 0.001588] Console: colour dummy device 80x25
  183. [ 0.001998] console [tty0] enabled
  184. [ 0.002319] bootconsole [uart0] disabled
  185. [ 0.002715] Calibrating delay loop (skipped), value calculated using timer frequency.. 48.00 BogoMIPS (lpj=24000)
  186. [ 0.002752] pid_max: default: 32768 minimum: 301
  187. [ 0.002890] Security Framework initialized
  188. [ 0.002912] Yama: becoming mindful.
  189. [ 0.002946] AppArmor: AppArmor disabled by boot time parameter
  190. [ 0.003030] Mount-cache hash table entries: 8192 (order: 4, 65536 bytes)
  191. [ 0.003059] Mountpoint-cache hash table entries: 8192 (order: 4, 65536 bytes)
  192. [ 0.003973] Initializing cgroup subsys io
  193. [ 0.004006] Initializing cgroup subsys memory
  194. [ 0.004054] Initializing cgroup subsys devices
  195. [ 0.004081] Initializing cgroup subsys freezer
  196. [ 0.004106] Initializing cgroup subsys net_cls
  197. [ 0.004131] Initializing cgroup subsys perf_event
  198. [ 0.004156] Initializing cgroup subsys net_prio
  199. [ 0.004187] Initializing cgroup subsys hugetlb
  200. [ 0.004209] Initializing cgroup subsys pids
  201. [ 0.004272] ftrace: allocating 42863 entries in 168 pages
  202. [ 0.121767] sched-energy: CPU device node has no sched-energy-costs
  203. [ 0.121802] Invalid sched_group_energy for CPU0
  204. [ 0.121819] CPU0: update cpu_capacity 1024
  205. [ 0.121887] ASID allocator initialised with 65536 entries
  206. [ 0.127177] Detected VIPT I-cache on CPU1
  207. [ 0.127235] Invalid sched_group_energy for CPU1
  208. [ 0.127241] CPU1: update cpu_capacity 1024
  209. [ 0.127246] CPU1: Booted secondary processor [410fd034]
  210. [ 0.128029] Detected VIPT I-cache on CPU2
  211. [ 0.128076] Invalid sched_group_energy for CPU2
  212. [ 0.128081] CPU2: update cpu_capacity 1024
  213. [ 0.128086] CPU2: Booted secondary processor [410fd034]
  214. [ 0.128826] Detected VIPT I-cache on CPU3
  215. [ 0.128871] Invalid sched_group_energy for CPU3
  216. [ 0.128876] CPU3: update cpu_capacity 1024
  217. [ 0.128881] CPU3: Booted secondary processor [410fd034]
  218. [ 0.129013] Brought up 4 CPUs
  219. [ 0.129305] SMP: Total of 4 processors activated.
  220. [ 0.129341] CPU: All CPU(s) started at EL2
  221. [ 0.129405] alternatives: patching kernel code
  222. [ 0.129659] Invalid sched_group_energy for CPU3
  223. [ 0.129691] Invalid sched_group_energy for Cluster3
  224. [ 0.129719] Invalid sched_group_energy for CPU2
  225. [ 0.129747] Invalid sched_group_energy for Cluster2
  226. [ 0.129774] Invalid sched_group_energy for CPU1
  227. [ 0.129801] Invalid sched_group_energy for Cluster1
  228. [ 0.129829] Invalid sched_group_energy for CPU0
  229. [ 0.129887] Invalid sched_group_energy for Cluster0
  230. [ 0.130611] devtmpfs: initialized
  231. [ 0.147183] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1911260446275000 ns
  232. [ 0.147261] futex hash table entries: 1024 (order: 4, 65536 bytes)
  233. [ 0.147906] xor: measuring software checksum speed
  234. [ 0.157268] 8regs : 1080.000 MB/sec
  235. [ 0.167362] 8regs_prefetch: 968.000 MB/sec
  236. [ 0.177459] 32regs : 1352.000 MB/sec
  237. [ 0.187557] 32regs_prefetch: 1116.000 MB/sec
  238. [ 0.187586] xor: using function: 32regs (1352.000 MB/sec)
  239. [ 0.187667] pinctrl core: initialized pinctrl subsystem
  240. [ 0.188981] NET: Registered protocol family 16
  241. [ 0.192665] cpuidle: using governor ladder
  242. [ 0.196699] cpuidle: using governor menu
  243. [ 0.196748] Registered FIQ tty driver
  244. [ 0.197210] vdso: 2 pages (1 code @ ffffff8008ba6000, 1 data @ ffffff80090d4000)
  245. [ 0.197290] hw-breakpoint: found 6 breakpoint and 4 watchpoint registers.
  246. [ 0.197794] DMA: preallocated 1024 KiB pool for atomic allocations
  247. [ 0.221538] genirq: Setting trigger mode 8 for irq 176 failed (gic_set_type+0x0/0x68)
  248. [ 0.280139] console [ttyFIQ0] enabled
  249. [ 0.280806] Registered fiq debugger ttyFIQ0
  250. [ 0.315903] raid6: int64x1 gen() 191 MB/s
  251. [ 0.332976] raid6: int64x1 xor() 185 MB/s
  252. [ 0.350224] raid6: int64x2 gen() 296 MB/s
  253. [ 0.367292] raid6: int64x2 xor() 277 MB/s
  254. [ 0.384476] raid6: int64x4 gen() 468 MB/s
  255. [ 0.401694] raid6: int64x4 xor() 339 MB/s
  256. [ 0.418982] raid6: int64x8 gen() 332 MB/s
  257. [ 0.436116] raid6: int64x8 xor() 267 MB/s
  258. [ 0.453328] raid6: neonx1 gen() 363 MB/s
  259. [ 0.470483] raid6: neonx1 xor() 369 MB/s
  260. [ 0.487738] raid6: neonx2 gen() 570 MB/s
  261. [ 0.504922] raid6: neonx2 xor() 494 MB/s
  262. [ 0.522089] raid6: neonx4 gen() 761 MB/s
  263. [ 0.539301] raid6: neonx4 xor() 578 MB/s
  264. [ 0.556511] raid6: neonx8 gen() 777 MB/s
  265. [ 0.573680] raid6: neonx8 xor() 578 MB/s
  266. [ 0.574081] raid6: using algorithm neonx8 gen() 777 MB/s
  267. [ 0.574570] raid6: .... xor() 578 MB/s, rmw enabled
  268. [ 0.575040] raid6: using intx1 recovery algorithm
  269. [ 0.575961] mpp venc_srv: mpp_probe enter
  270. [ 0.576398] mpp venc_srv: init success
  271. [ 0.579347] iommu: Adding device ff350000.vpu-service to group 0
  272. [ 0.580036] iommu: Adding device ff360000.rkvdec to group 1
  273. [ 0.580629] iommu: Adding device ff330000.h265e to group 2
  274. [ 0.581235] iommu: Adding device ff340000.vepu to group 3
  275. [ 0.581813] iommu: Adding device ff370000.vop to group 4
  276. [ 0.583231] rk_iommu ff360480.iommu: can't get aclk
  277. [ 0.583741] rk_iommu ff360480.iommu: can't get hclk
  278. [ 0.584363] rk_iommu ff330200.iommu: can't get aclk
  279. [ 0.584853] rk_iommu ff330200.iommu: can't get hclk
  280. [ 0.585664] rk_iommu ff373f00.iommu: can't get aclk
  281. [ 0.586150] rk_iommu ff373f00.iommu: can't get hclk
  282. [ 0.587235] SCSI subsystem initialized
  283. [ 0.587900] usbcore: registered new interface driver usbfs
  284. [ 0.588506] usbcore: registered new interface driver hub
  285. [ 0.589116] usbcore: registered new device driver usb
  286. [ 0.589716] media: Linux media interface: v0.10
  287. [ 0.590204] Linux video capture interface: v2.00
  288. [ 0.590755] pps_core: LinuxPPS API ver. 1 registered
  289. [ 0.591223] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
  290. [ 0.592196] PTP clock support registered
  291. [ 0.594223] Advanced Linux Sound Architecture Driver Initialized.
  292. [ 0.595663] Bluetooth: Core ver 2.21
  293. [ 0.596080] NET: Registered protocol family 31
  294. [ 0.596524] Bluetooth: HCI device and connection manager initialized
  295. [ 0.597120] Bluetooth: HCI socket layer initialized
  296. [ 0.597600] Bluetooth: L2CAP socket layer initialized
  297. [ 0.598102] Bluetooth: SCO socket layer initialized
  298. [ 0.599276] NetLabel: Initializing
  299. [ 0.599629] NetLabel: domain hash size = 128
  300. [ 0.600039] NetLabel: protocols = UNLABELED CIPSOv4
  301. [ 0.600572] NetLabel: unlabeled traffic allowed by default
  302. [ 0.601556] rockchip-cpuinfo cpuinfo: Serial : efc6597757973231
  303. [ 0.602904] clocksource: Switched to clocksource arch_sys_counter
  304. [ 0.703023] NET: Registered protocol family 2
  305. [ 0.704312] TCP established hash table entries: 32768 (order: 6, 262144 bytes)
  306. [ 0.705432] TCP bind hash table entries: 32768 (order: 8, 1048576 bytes)
  307. [ 0.707601] TCP: Hash tables configured (established 32768 bind 32768)
  308. [ 0.708355] UDP hash table entries: 2048 (order: 5, 196608 bytes)
  309. [ 0.709202] UDP-Lite hash table entries: 2048 (order: 5, 196608 bytes)
  310. [ 0.710381] NET: Registered protocol family 1
  311. [ 0.711360] RPC: Registered named UNIX socket transport module.
  312. [ 0.711944] RPC: Registered udp transport module.
  313. [ 0.712389] RPC: Registered tcp transport module.
  314. [ 0.712833] RPC: Registered tcp NFSv4.1 backchannel transport module.
  315. [ 0.713745] Trying to unpack rootfs image as initramfs...
  316. [ 1.026424] Freeing initrd memory: 3420K (ffffffc0fcbc2000 - ffffffc0fcf19000)
  317. [ 1.027928] hw perfevents: enabled with armv8_cortex_a53 PMU driver, 7 counters available
  318. [ 1.029845] kvm [1]: 8-bit VMID
  319. [ 1.030196] kvm [1]: Hyp mode initialized successfully
  320. [ 1.031144] kvm [1]: interrupt-controller@ff814000 IRQ43
  321. [ 1.031989] kvm [1]: timer IRQ3
  322. [ 1.036480] audit: initializing netlink subsys (disabled)
  323. [ 1.037079] audit: type=2000 audit(0.943:1): initialized
  324. [ 1.038808] HugeTLB registered 2 MB page size, pre-allocated 0 pages
  325. [ 1.052679] VFS: Disk quotas dquot_6.6.0
  326. [ 1.053393] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
  327. [ 1.058337] NFS: Registering the id_resolver key type
  328. [ 1.058855] Key type id_resolver registered
  329. [ 1.059279] Key type id_legacy registered
  330. [ 1.059676] Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
  331. [ 1.061400] fuse init (API version 7.23)
  332. [ 1.062855] JFS: nTxBlock = 8192, nTxLock = 65536
  333. [ 1.070313] SGI XFS with ACLs, security attributes, realtime, no debug enabled
  334. [ 1.073768] Key type big_key registered
  335. [ 1.074300]
  336. [ 1.074300] TEE Core Framework initialization (ver 1:0.1)
  337. [ 1.074994] TEE armv7 Driver initialization
  338. [ 1.075821] tz_tee_probe: name="armv7sec", id=0, pdev_name="armv7sec.0"
  339. [ 1.076459] TEE core: Alloc the misc device "opteearmtz00" (id=0)
  340. [ 1.077368] TEE Core: Register the misc device "opteearmtz00" (id=0,minor=62)
  341. [ 1.084344] NET: Registered protocol family 38
  342. [ 1.084814] Key type asymmetric registered
  343. [ 1.085247] Asymmetric key parser 'x509' registered
  344. [ 1.086044] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 247)
  345. [ 1.087193] io scheduler noop registered
  346. [ 1.087587] io scheduler deadline registered (default)
  347. [ 1.088154] io scheduler cfq registered
  348. [ 1.094440] rockchip-u3phy ff470000.usb3-phy: Rockchip u3phy initialized successfully
  349. [ 1.098629] rk-vcodec ff350000.vpu-service: probe device
  350. [ 1.099221] rk-vcodec ff350000.vpu-service: vpu mmu dec ffffffc0f5f82c10
  351. [ 1.100136] rk-vcodec ff350000.vpu-service: allocator is drm
  352. [ 1.100740] rk-vcodec ff350000.vpu-service: checking hw id 0
  353. [ 1.101999] rk-vcodec ff350000.vpu-service: init success
  354. [ 1.103294] rk-vcodec ff360000.rkvdec: probe device
  355. [ 1.103796] rk-vcodec ff360000.rkvdec: vpu mmu dec ffffffc0f5f83410
  356. [ 1.104688] rk-vcodec ff360000.rkvdec: allocator is drm
  357. [ 1.105281] rk-vcodec ff360000.rkvdec: checking hw id 3410
  358. [ 1.106459] rk-vcodec ff360000.rkvdec: init success
  359. [ 1.107376] probe device ff330000.h265e
  360. [ 1.108174] mpp_dev ff330000.h265e: try to get iommu dev ffffffc0f5f83c10
  361. [ 1.109247] mpp_dev ff330000.h265e: resource ready, register device
  362. [ 1.110161] probe device ff340000.vepu
  363. [ 1.110869] mpp_dev ff340000.vepu: try to get iommu dev ffffffc0f5fa4410
  364. [ 1.111836] rockchip_mpp_vepu_reset_init:143: No aclk reset resource define
  365. [ 1.112504] rockchip_mpp_vepu_reset_init:148: No hclk reset resource define
  366. [ 1.113163] mpp_dev ff340000.vepu: resource ready, register device
  367. [ 1.116868] dma-pl330 ff1f0000.dmac: Loaded driver for PL330 DMAC-241330
  368. [ 1.117524] dma-pl330 ff1f0000.dmac: DBUFF-128x8bytes Num_Chans-8 Num_Peri-20 Num_Events-16
  369. [ 1.119347] Serial: 8250/16550 driver, 5 ports, IRQ sharing disabled
  370. [ 1.122875] [drm:drm_core_init] Initialized drm 1.1.0 20060810
  371. [ 1.126629] rockchip-vop ff370000.vop: invalid resource
  372. [ 1.127178] rockchip-vop ff370000.vop: failed to get vop lut registers
  373. [ 1.127790] rockchip-vop ff370000.vop: invalid resource
  374. [ 1.128301] rockchip-vop ff370000.vop: failed to get vop cabc lut registers
  375. [ 1.129202] rockchip-drm display-subsystem: bound ff370000.vop (ops 0xffffff8008c61338)
  376. [ 1.130326] i2c i2c-4: of_i2c: modalias failure on /hdmi@ff3c0000/ports
  377. [ 1.130968] dwhdmi-rockchip ff3c0000.hdmi: registered DesignWare HDMI I2C bus driver
  378. [ 1.131770] dwhdmi-rockchip ff3c0000.hdmi: Detected HDMI TX controller v2.11a with HDCP (inno_dw_hdmi_phy2)
  379. [ 1.133645] rockchip-drm display-subsystem: bound ff3c0000.hdmi (ops 0xffffff8008c5bd28)
  380. [ 1.134450] [drm:drm_vblank_init] Supports vblank timestamp caching Rev 2 (21.10.2013).
  381. [ 1.135211] [drm:drm_vblank_init] No driver support for vblank timestamp query.
  382. [ 1.135975] rockchip-drm display-subsystem: failed to parse display resources
  383. [ 1.136670] rockchip-drm display-subsystem: No connectors reported connected with modes
  384. [ 1.137492] [drm:drm_fb_helper_single_fb_probe] Cannot find any crtc or sizes - going 1024x768
  385. [ 1.163727] Console: switching to colour frame buffer device 128x48
  386. [ 1.183786] rockchip-drm display-subsystem: fb0: frame buffer device
  387. [ 1.192829] Unable to detect cache hierarchy from DT for CPU 0
  388. [ 1.194982] brd: module loaded
  389. [ 1.204844] loop: module loaded
  390. [ 1.206360] zram: Added device: zram0
  391. [ 1.207183] lkdtm: No crash points registered, enable through debugfs
  392. [ 1.209660] rockchip-spi ff190000.spi: Failed to request TX DMA channel
  393. [ 1.210558] rockchip-spi ff190000.spi: Failed to request RX DMA channel
  394. [ 1.212341] m25p80 spi32766.0: unrecognized JEDEC id bytes: ff, ff, ff
  395. [ 1.213225] m25p80: probe of spi32766.0 failed with error -2
  396. [ 1.215986] rk_gmac-dwmac ff540000.eth: clock input or output? (input).
  397. [ 1.216843] rk_gmac-dwmac ff540000.eth: TX delay(0x26).
  398. [ 1.217543] rk_gmac-dwmac ff540000.eth: RX delay(0x11).
  399. [ 1.218435] rk_gmac-dwmac ff540000.eth: clock input from PHY
  400. [ 1.219183] rk_gmac-dwmac ff540000.eth: init for RGMII
  401. [ 1.225046] stmmac - user ID: 0x10, Synopsys ID: 0x35
  402. [ 1.225689] Ring mode enabled
  403. [ 1.226109] DMA HW capability register supported
  404. [ 1.226691] Normal descriptors
  405. [ 1.227158] RX Checksum Offload Engine supported (type 2)
  406. [ 1.227858] TX Checksum insertion supported
  407. [ 1.228417] Wake-Up On Lan supported
  408. [ 1.228968] Enable RX Mitigation via HW Watchdog Timer
  409. [ 1.318522] libphy: stmmac: probed
  410. [ 1.327073] eth%d: PHY ID 001cc916 at 0 IRQ POLL (stmmac-0:00) active
  411. [ 1.335968] eth%d: PHY ID 001cc916 at 1 IRQ POLL (stmmac-0:01)
  412. [ 1.346046] Rockchip WiFi SYS interface (V1.00) ...
  413. [ 1.355036] usbcore: registered new interface driver cdc_ether
  414. [ 1.364018] usbcore: registered new interface driver rndis_host
  415. [ 1.374662] phy phy-ff470000.usb3-phy.2: u3phy u2 power on
  416. [ 1.383427] phy phy-ff470000.usb3-phy.3: u3phy u3 power on
  417. [ 1.392952] ff580000.usb supply vusb_d not found, using dummy regulator
  418. [ 1.401675] ff580000.usb supply vusb_a not found, using dummy regulator
  419. [ 1.566171] dwc2 ff580000.usb: DWC OTG Controller
  420. [ 1.574321] dwc2 ff580000.usb: new USB bus registered, assigned bus number 1
  421. [ 1.582660] dwc2 ff580000.usb: irq 40, io mem 0x00000000
  422. [ 1.590961] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
  423. [ 1.599077] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
  424. [ 1.607143] usb usb1: Product: DWC OTG Controller
  425. [ 1.614855] usb usb1: Manufacturer: Linux 4.4.77-rockchip-ayufan-136 dwc2_hsotg
  426. [ 1.622845] usb usb1: SerialNumber: ff580000.usb
  427. [ 1.631367] hub 1-0:1.0: USB hub found
  428. [ 1.638875] hub 1-0:1.0: 1 port detected
  429. [ 1.647538] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
  430. [ 1.655245] ehci-pci: EHCI PCI platform driver
  431. [ 1.662677] ehci-platform: EHCI generic platform driver
  432. [ 1.672562] ehci-platform ff5c0000.usb: EHCI Host Controller
  433. [ 1.680226] ehci-platform ff5c0000.usb: new USB bus registered, assigned bus number 2
  434. [ 1.687929] ehci-platform ff5c0000.usb: irq 41, io mem 0xff5c0000
  435. [ 1.700944] ehci-platform ff5c0000.usb: USB 2.0 started, EHCI 1.00
  436. [ 1.708492] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
  437. [ 1.715916] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
  438. [ 1.723425] usb usb2: Product: EHCI Host Controller
  439. [ 1.730648] usb usb2: Manufacturer: Linux 4.4.77-rockchip-ayufan-136 ehci_hcd
  440. [ 1.738137] usb usb2: SerialNumber: ff5c0000.usb
  441. [ 1.746549] hub 2-0:1.0: USB hub found
  442. [ 1.753823] hub 2-0:1.0: 1 port detected
  443. [ 1.761616] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
  444. [ 1.769061] ohci-platform: OHCI generic platform driver
  445. [ 1.776810] ohci-platform ff5d0000.usb: Generic Platform OHCI controller
  446. [ 1.784746] ohci-platform ff5d0000.usb: new USB bus registered, assigned bus number 3
  447. [ 1.792708] ohci-platform ff5d0000.usb: irq 42, io mem 0xff5d0000
  448. [ 1.855211] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
  449. [ 1.863057] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
  450. [ 1.870940] usb usb3: Product: Generic Platform OHCI controller
  451. [ 1.878728] usb usb3: Manufacturer: Linux 4.4.77-rockchip-ayufan-136 ohci_hcd
  452. [ 1.886719] usb usb3: SerialNumber: ff5d0000.usb
  453. [ 1.896110] hub 3-0:1.0: USB hub found
  454. [ 1.903838] hub 3-0:1.0: 1 port detected
  455. [ 1.912665] xhci-hcd xhci-hcd.8.auto: xHCI Host Controller
  456. [ 1.920831] xhci-hcd xhci-hcd.8.auto: new USB bus registered, assigned bus number 4
  457. [ 1.929145] xhci-hcd xhci-hcd.8.auto: hcc params 0x0220fe64 hci version 0x110 quirks 0x00210010
  458. [ 1.937435] xhci-hcd xhci-hcd.8.auto: irq 180, io mem 0xff600000
  459. [ 1.945781] usb usb4: New USB device found, idVendor=1d6b, idProduct=0002
  460. [ 1.953934] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
  461. [ 1.962115] usb usb4: Product: xHCI Host Controller
  462. [ 1.970146] usb usb4: Manufacturer: Linux 4.4.77-rockchip-ayufan-136 xhci-hcd
  463. [ 1.978460] usb usb4: SerialNumber: xhci-hcd.8.auto
  464. [ 1.987493] hub 4-0:1.0: USB hub found
  465. [ 1.995583] hub 4-0:1.0: 1 port detected
  466. [ 2.004209] xhci-hcd xhci-hcd.8.auto: xHCI Host Controller
  467. [ 2.012955] xhci-hcd xhci-hcd.8.auto: new USB bus registered, assigned bus number 5
  468. [ 2.021587] usb usb5: We don't know the algorithms for LPM for this host, disabling LPM.
  469. [ 2.030426] usb usb5: New USB device found, idVendor=1d6b, idProduct=0003
  470. [ 2.038914] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
  471. [ 2.047446] usb usb5: Product: xHCI Host Controller
  472. [ 2.055689] usb usb5: Manufacturer: Linux 4.4.77-rockchip-ayufan-136 xhci-hcd
  473. [ 2.064194] usb usb5: SerialNumber: xhci-hcd.8.auto
  474. [ 2.073336] hub 5-0:1.0: USB hub found
  475. [ 2.081543] hub 5-0:1.0: 1 port detected
  476. [ 2.092067] usbcore: registered new interface driver usbtouchscreen
  477. [ 2.101242] i2c /dev entries driver
  478. [ 2.112391] rk808 1-0018: Pmic Chip id: 0x8050
  479. [ 2.121728] rk808 1-0018: source: on=0x40, off=0x01
  480. [ 2.135706] DCDC_REG1: supplied by vcc_sys
  481. [ 2.147029] DCDC_REG2: supplied by vcc_sys
  482. [ 2.157600] DCDC_REG3: supplied by vcc_sys
  483. [ 2.167274] DCDC_REG4: supplied by vcc_sys
  484. [ 2.176623] vcc_sd: supplied by vcc_io
  485. [ 2.184418] LDO_REG1: supplied by vcc_io
  486. [ 2.195084] LDO_REG2: supplied by vcc_io
  487. [ 2.205341] LDO_REG3: supplied by vcc_sys
  488. [ 2.215385] rk808 1-0018: register rk8050 regulators
  489. [ 2.223262] rk8xx-gpio rk8xx-gpio: register rk8050 gpio successful
  490. [ 2.233070] input: rk8xx_pwrkey as /devices/platform/ff160000.i2c/i2c-1/1-0018/input/input0
  491. [ 2.241695] rk808-rtc rk808-rtc: device is disabled
  492. [ 2.249486] rk808-rtc: probe of rk808-rtc failed with error -22
  493. [ 2.257406] rk3x-i2c ff160000.i2c: Initialized RK3xxx I2C bus at ffffff8009d64000
  494. [ 2.267112] IR NEC protocol handler initialized
  495. [ 2.275427] usbcore: registered new interface driver uvcvideo
  496. [ 2.283331] USB Video Class driver (1.1.1)
  497. [ 2.295005] rockchip-thermal ff250000.tsadc: Missing tshut mode property, using default (cru)
  498. [ 2.303372] rockchip-thermal ff250000.tsadc: Missing tshut-polarity property, using default (low)
  499. [ 2.313224] device-mapper: ioctl: 4.34.0-ioctl (2015-10-28) initialised: dm-devel@redhat.com
  500. [ 2.321683] Bluetooth: Virtual HCI driver ver 1.5
  501. [ 2.329987] Bluetooth: HCI UART driver ver 2.3
  502. [ 2.338042] Bluetooth: HCI UART protocol H4 registered
  503. [ 2.346104] Bluetooth: HCI UART protocol LL registered
  504. [ 2.354029] Bluetooth: HCI UART protocol ATH3K registered
  505. [ 2.362063] usbcore: registered new interface driver bfusb
  506. [ 2.370009] usbcore: registered new interface driver btusb
  507. [ 2.380759] sdhci: Secure Digital Host Controller Interface driver
  508. [ 2.388596] sdhci: Copyright(c) Pierre Ossman
  509. [ 2.396152] Synopsys Designware Multimedia Card Interface Driver
  510. [ 2.405197] dwmmc_rockchip ff520000.rksdmmc: IDMAC supports 32-bit address mode.
  511. [ 2.410249] dwmmc_rockchip ff520000.rksdmmc: Using internal DMA controller.
  512. [ 2.415176] dwmmc_rockchip ff520000.rksdmmc: Version ID is 270a
  513. [ 2.420045] dwmmc_rockchip ff520000.rksdmmc: DW MMC controller at irq 37,32 bit host data width,256 deep fifo
  514. [ 2.436931] mmc_host mmc0: Bus speed (slot 0) = 400000Hz (slot req 400000Hz, actual 400000HZ div = 0)
  515. [ 2.451981] dwmmc_rockchip ff520000.rksdmmc: 1 slots initialized
  516. [ 2.456717] dwmmc_rockchip ff500000.rksdmmc: IDMAC supports 32-bit address mode.
  517. [ 2.461160] dwmmc_rockchip ff500000.rksdmmc: Using internal DMA controller.
  518. [ 2.465486] dwmmc_rockchip ff500000.rksdmmc: Version ID is 270a
  519. [ 2.469706] dwmmc_rockchip ff500000.rksdmmc: DW MMC controller at irq 38,32 bit host data width,256 deep fifo
  520. [ 2.474824] dwmmc_rockchip ff500000.rksdmmc: Got CD GPIO
  521. [ 2.488939] mmc_host mmc0: Bus speed (slot 0) = 300000Hz (slot req 300000Hz, actual 300000HZ div = 0)
  522. [ 2.493327] mmc_host mmc1: Bus speed (slot 0) = 400000Hz (slot req 400000Hz, actual 400000HZ div = 0)
  523. [ 2.508218] dwmmc_rockchip ff500000.rksdmmc: 1 slots initialized
  524. [ 2.512410] sdhci-pltfm: SDHCI platform and OF driver helper
  525. [ 2.517714] hidraw: raw HID events driver (C) Jiri Kosina
  526. [ 2.522130] usbcore: registered new interface driver usbhid
  527. [ 2.524155] mmc_host mmc0: Bus speed (slot 0) = 200000Hz (slot req 200000Hz, actual 200000HZ div = 0)
  528. [ 2.536500] usbhid: USB HID core driver
  529. [ 2.543111] usbcore: registered new interface driver snd-usb-audio
  530. [ 2.549500] rk3328-codec ff410000.codec: spk_depop_time use default value.
  531. [ 2.557977] mmc_host mmc0: Bus speed (slot 0) = 100000Hz (slot req 100000Hz, actual 100000HZ div = 0)
  532. [ 2.558386] u32 classifier
  533. [ 2.558397] Netfilter messages via NETLINK v0.30.
  534. [ 2.558441] ip_set: protocol 6
  535. [ 2.558597] Initializing XFRM netlink socket
  536. [ 2.559164] NET: Registered protocol family 10
  537. [ 2.587527] NET: Registered protocol family 17
  538. [ 2.591975] NET: Registered protocol family 15
  539. [ 2.596261] bridge: automatic filtering via arp/ip/ip6tables has been deprecated. Update your scripts to load br_netfilter if you need this.
  540. [ 2.605352] Bridge firewalling registered
  541. [ 2.609788] Bluetooth: RFCOMM socket layer initialized
  542. [ 2.614258] Bluetooth: RFCOMM ver 1.11
  543. [ 2.618522] Bluetooth: HIDP (Human Interface Emulation) ver 1.2
  544. [ 2.622950] Bluetooth: HIDP socket layer initialized
  545. [ 2.627326] 8021q: 802.1Q VLAN Support v1.8
  546. [ 2.629202] mmc_host mmc1: Bus speed (slot 0) = 50000000Hz (slot req 50000000Hz, actual 50000000HZ div = 0)
  547. [ 2.629260] mmc1: new high speed SDHC card at address 59b4
  548. [ 2.629742] mmcblk1: mmc1:59b4 BA1MW 14.9 GiB
  549. [ 2.636049] GPT:Primary header thinks Alt. header is not at the end of the disk.
  550. [ 2.636053] GPT:4458495 != 31225855
  551. [ 2.636055] GPT:Alternate GPT header not at the end of the disk.
  552. [ 2.636056] GPT:4458495 != 31225855
  553. [ 2.636057] GPT: Use GNU Parted to correct GPT errors.
  554. [ 2.636092] mmcblk1: p1 p2 p3 p4 p5 p6 p7
  555. [ 2.671924] [WLAN_RFKILL]: Enter rfkill_wlan_init
  556. [ 2.676599] [BT_RFKILL]: Enter rfkill_rk_init
  557. [ 2.681200] Key type dns_resolver registered
  558. [ 2.686136] Registered cp15_barrier emulation handler
  559. [ 2.690626] Registered setend emulation handler
  560. [ 2.695621] registered taskstats version 1
  561. [ 2.701655] Btrfs loaded, integrity-checker=on
  562. [ 2.705989] BTRFS: selftest: Running btrfs free space cache tests
  563. [ 2.710399] BTRFS: selftest: Running extent only tests
  564. [ 2.714670] BTRFS: selftest: Running bitmap only tests
  565. [ 2.718911] BTRFS: selftest: Running bitmap and extent tests
  566. [ 2.723158] BTRFS: selftest: Running space stealing from bitmap to extent
  567. [ 2.728328] BTRFS: selftest: Free space cache tests finished
  568. [ 2.732447] BTRFS: selftest: Running extent buffer operation tests
  569. [ 2.733087] BTRFS: selftest: Running btrfs_split_item tests
  570. [ 2.740792] BTRFS: selftest: Running find delalloc tests
  571. [ 2.957311] BTRFS: selftest: Running btrfs_get_extent tests
  572. [ 2.961543] BTRFS: selftest: Running hole first btrfs_get_extent test
  573. [ 2.965670] BTRFS: selftest: Running outstanding_extents tests
  574. [ 2.969670] BTRFS: selftest: Running qgroup tests
  575. [ 2.973409] BTRFS: selftest: Qgroup basic add
  576. [ 2.977121] BTRFS: selftest: Qgroup multiple refs test
  577. [ 2.994952] asoc-simple-card hdmi-sound: i2s-hifi <-> ff000000.i2s mapping ok
  578. [ 3.020362] asoc-simple-card sound: rk3328-hifi <-> ff010000.i2s mapping ok
  579. [ 3.024542] asoc-simple-card sound: snd-soc-dummy-dai <-> ff010000.i2s mapping ok
  580. [ 3.029985] asoc-simple-card spdif-sound: dit-hifi <-> ff030000.spdif mapping ok
  581. [ 3.034692] hctosys: unable to open rtc device (rtc0)
  582. [ 3.057302] rockchip-pm-domain ff100000.syscon:power-controller: failed to get ack on domain 'pd_video', val=0x10040
  583. [ 3.071692] rockchip-pm-domain ff100000.syscon:power-controller: failed to get ack on domain 'pd_vpu', val=0x10040
  584. [ 3.076052] I : [File] : drivers/gpu/arm/mali400/mali/linux/mali_kernel_linux.c; [Line] : 414; [Func] : mali_module_init(); svn_rev_string_from_arm of this mali_ko is '-a58dd56', rk_ko_ver is '5', built at '09:12:53', on 'Oct 12 2017'.
  585. [ 3.085186] mali-utgard ff300000.gpu: mali_platform_device->num_resources = 9
  586. [ 3.089349] mali-utgard ff300000.gpu: resource[0].start = 0x0x00000000ff300000
  587. [ 3.093516] mali-utgard ff300000.gpu: resource[1].start = 0x0x00000000ff300000
  588. [ 3.097627] mali-utgard ff300000.gpu: resource[2].start = 0x0x0000000000000011
  589. [ 3.101715] mali-utgard ff300000.gpu: resource[3].start = 0x0x0000000000000012
  590. [ 3.105755] mali-utgard ff300000.gpu: resource[4].start = 0x0x0000000000000013
  591. [ 3.109753] mali-utgard ff300000.gpu: resource[5].start = 0x0x0000000000000014
  592. [ 3.113694] mali-utgard ff300000.gpu: resource[6].start = 0x0x0000000000000015
  593. [ 3.117515] mali-utgard ff300000.gpu: resource[7].start = 0x0x0000000000000016
  594. [ 3.121218] mali-utgard ff300000.gpu: resource[8].start = 0x0x0000000000000017
  595. [ 3.124866] D : [File] : drivers/gpu/arm/mali400/mali/platform/rk/rk.c; [Line] : 518; [Func] : mali_platform_device_init(); to add platform_specific_data to platform_device_of_mali.
  596. [ 3.134464] Mali: Mali device driver loaded
  597. [ 3.139289] ALSA device list:
  598. [ 3.142681] #0: HDMI
  599. [ 3.145946] #1: I2S
  600. [ 3.149160] #2: SPDIF
  601. [ 3.152863] Freeing unused kernel memory: 1152K (ffffff8008fb0000 - ffffff80090d0000)
  602. Loading, please wait...
  603. starting version 229
  604. [ 3.196769] random: systemd-udevd: uninitialized urandom read (16 bytes read, 5 bits of entropy available)
  605. [ 3.197834] random: udevadm: uninitialized urandom read (16 bytes read, 5 bits of entropy available)
  606. [ 3.198023] random: udevadm: uninitialized urandom read (16 bytes read, 5 bits of entropy available)
  607. [ 3.198069] random: udevadm: uninitialized urandom read (16 bytes read, 5 bits of entropy available)
  608. [ 3.198147] random: udevadm: uninitialized urandom read (16 bytes read, 5 bits of entropy available)
  609. [ 3.198365] random: udevadm: uninitialized urandom read (16 bytes read, 5 bits of entropy available)
  610. [ 3.198441] random: udevadm: uninitialized urandom read (16 bytes read, 5 bits of entropy available)
  611. [ 3.198646] random: udevadm: uninitialized urandom read (16 bytes read, 5 bits of entropy available)
  612. [ 3.198702] random: udevadm: uninitialized urandom read (16 bytes read, 5 bits of entropy available)
  613. [ 3.198940] random: udevadm: uninitialized urandom read (16 bytes read, 5 bits of entropy available)
  614. Begin: Loading essential drivers ... done.
  615. Begin: Running /scripts/init-premount ... done.
  616. Begin: Mounting root file system ... Begin: Running /scripts/local-top ... done.
  617. Begin: Running /scripts/local-premount ... done.
  618. Warning: fsck not present, so skipping root file system
  619. [ 3.732637] EXT4-fs (mmcblk1p7): mounted filesystem with writeback data mode. Opts: (null)
  620. done.
  621. Begin: Running /scripts/local-bottom ... done.
  622. Begin: Running /scripts/init-bottom ... done.
  623. [ 4.123142] systemd[1]: System time before build time, advancing clock.
  624. [ 4.175161] systemd[1]: Failed to insert module 'autofs4': No such file or directory
  625. [ 4.224332] systemd[1]: systemd 229 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ -LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD -IDN)
  626. [ 4.247761] systemd[1]: Detected architecture arm64.
  627.  
  628. Welcome to Ubuntu 16.04.3 LTS!
  629.  
  630. [ 4.264602] systemd[1]: Set hostname to <rock64>.
  631. [ 4.281877] systemd[1]: Initializing machine ID from random generator.
  632. [ 4.720154] systemd[1]: Listening on Journal Socket (/dev/log).
  633. [ OK ] Listening on Journal Socket (/dev/log).
  634. [ 4.729085] systemd[1]: Listening on udev Control Socket.
  635. [ OK ] Listening on udev Control Socket.
  636. [ 4.737969] systemd[1]: Created slice User and Session Slice.
  637. [ OK ] Created slice User and Session Slice.
  638. [ 4.744624] systemd[1]: Created slice System Slice.
  639. [ OK ] Created slice System Slice.
  640. [ 4.750768] systemd[1]: Reached target Slices.
  641. [ OK ] Reached target Slices.
  642. [ 4.756951] systemd[1]: Reached target Remote File Systems (Pre).
  643. [ OK ] Reached target Remote File Systems (Pre).
  644. [ 4.762139] systemd[1]: Reached target Remote File Systems.
  645. [ OK ] Reached target Remote File Systems.
  646. [ 4.767469] systemd[1]: Listening on /dev/initctl Compatibility Named Pipe.
  647. [ OK ] Listening on /dev/initctl Compatibility Named Pipe.
  648. [ 4.772603] systemd[1]: Reached target Encrypted Volumes.
  649. [ OK ] Reached target Encrypted Volumes.
  650. [ 4.777987] systemd[1]: Listening on Syslog Socket.
  651. [ OK ] Listening on Syslog Socket.
  652. [ 4.782281] systemd[1]: Started Forward Password Requests to Wall Directory Watch.
  653. [ OK ] Started Forward Password Requests to Wall Directory Watch.
  654. [ 4.786783] systemd[1]: Started Trigger resolvconf update for networkd DNS.
  655. [ OK ] Started Trigger resolvconf update for networkd DNS.
  656. [ 4.791255] systemd[1]: Started Dispatch Password Requests to Console Directory Watch.
  657. [ OK ] Started Dispatch Password Requests to Console Directory Watch.
  658. [ 4.795728] systemd[1]: Reached target Paths.
  659. [ OK ] Reached target Paths.
  660. [ 4.800215] systemd[1]: Listening on Journal Socket.
  661. [ OK ] Listening on Journal Socket.
  662. [ 4.805964] systemd[1]: Starting Create list of required static device nodes for the current kernel...
  663. Starting Create list of required st... nodes for the current kernel...
  664. [ 4.812235] systemd[1]: Started Read required files in advance.
  665. [ OK ] Started Read required files in advance.
  666. [ 4.818765] systemd[1]: Starting Remount Root and Kernel File Systems...
  667. Starting Remount Root and Kernel File Systems...
  668. [ 4.829436] systemd[1]: Starting Restore / save the current clock...
  669. Starting Restore / save the current clock...
  670. [ 4.835756] systemd[1]: Mounting Huge Pages File System...
  671. Mounting Huge Pages File System...
  672. [ 4.842491] systemd[1]: Starting Nameserver information manager...
  673. Starting Nameserver information manager...
  674. [ 4.849125] systemd[1]: Mounting POSIX Message Queue File System...
  675. Mounting POSIX Message Queue File System...
  676. [ 4.856118] systemd[1]: Mounting Debug File System...
  677. Mounting Debug File System...
  678. [ 4.862821] systemd[1]: Starting Set console keymap...
  679. Starting Set console keymap...
  680. [ 4.874879] systemd[1]: Starting Load Kernel Modules...
  681. Starting Load Kernel Modules...
  682. [ 4.886247] systemd[1]: Listening on udev Kernel Socket.
  683. [ OK ] Listening on udev Kernel Socket.
  684. [ 4.890320] systemd[1]: Reached target Swap.
  685. [ OK ] Reached target Swap.
  686. [ 4.894725] systemd[1]: Listening on Journal Audit Socket.
  687. [ OK ] Listening on Journal Audit Socket.
  688. [ 4.900832] systemd[1]: Starting Journal Service...
  689. Starting Journal Service...
  690. [ 4.905362] systemd[1]: Created slice system-serial\x2dgetty.slice.
  691. [ OK ] Created slice system-serial\x2dgetty.slice.
  692. [ 4.920042] systemd[1]: Mounted Huge Pages File System.
  693. [ OK ] Mounted Huge Pages File System.
  694. [ 4.924079] systemd[1]: Mounted Debug File System.
  695. [ OK ] Mounted Debug File System.
  696. [ 4.928183] systemd[1]: Mounted POSIX Message Queue File System.
  697. [ OK ] Mounted POSIX Message Queue File System.
  698. [ 4.933191] systemd[1]: Started Create list of required static device nodes for the current kernel.
  699. [ OK ] Started Create list of required sta...ce nodes for the current kernel.
  700. [ 4.938349] systemd[1]: ureadahead.service: Main process exited, code=exited, status=5/NOTINSTALLED
  701. [ 4.943721] systemd[1]: ureadahead.service: Unit entered failed state.
  702. [ 4.947944] systemd[1]: ureadahead.service: Failed with result 'exit-code'.
  703. [ 4.952880] systemd[1]: Started Remount Root and Kernel File Systems.
  704. [ OK ] Started Remount Root and Kernel File Systems.
  705. [ 4.958468] systemd[1]: Started Restore / save the current clock.
  706. [ OK ] Started Restore / save the current clock.
  707. [ 4.967487] systemd[1]: Started Load Kernel Modules.
  708. [ OK ] Started Load Kernel Modules.
  709. [ 4.975502] systemd[1]: Time has been changed
  710. [ 4.981677] systemd[1]: Started Nameserver information manager.
  711. [ OK ] Started Nameserver information manager.
  712. [ 5.007598] systemd[1]: Started Set console keymap.
  713. [ OK ] Started Set console keymap.
  714. [ 5.103927] systemd[1]: Started Journal Service.
  715. [ OK ] Started Journal Service.
  716. [ OK ] Reached target Network (Pre).
  717. Mounting FUSE Control File System...
  718. Mounting Configuration File System...
  719. Starting Apply Kernel Variables...
  720. Starting udev Coldplug all Devices...
  721. Starting Flush Journal to Persistent Storage...
  722. Starting Load/Save Random Seed...
  723. Starting Create Static Device Nodes in /dev...
  724. [ OK ] Mounted FUSE Control File System.
  725. [ OK ] Mounted Configuration File System.
  726. [ OK ] Started Load/Save Random Seed.
  727. [ OK ] Started Apply Kernel Variables.
  728. [ OK ] Started Create Static Device Nodes in /dev.
  729. [ OK ] Started Flush Journal to Persistent Storage.
  730. [ OK ] Reached target Local File Systems (Pre).
  731. Starting udev Kernel Device Manager...
  732. [ OK ] Started udev Coldplug all Devices.
  733. [ OK ] Started udev Kernel Device Manager.
  734. [ OK ] Found device /dev/ttyFIQ0.
  735. [ OK ] Reached target Sound Card.
  736. [ OK ] Listening on Load/Save RF Kill Switch Status /dev/rfkill Watch.
  737. [ OK ] Found device /dev/disk/by-label/boot.
  738. Mounting /boot/efi...
  739. [ OK ] Found device /sys/subsystem/net/devices/eth0.
  740. [ OK ] Mounted /boot/efi.
  741. [ OK ] Reached target Local File Systems.
  742. Starting Create Volatile Files and Directories...
  743. [ OK ] Started ifup for eth0.
  744. Starting Raise network interfaces...
  745. Starting Set console font and keymap...
  746. [ OK ] Started Create Volatile Files and Directories.
  747. Starting Update UTMP about System Boot/Shutdown...
  748. [ OK ] Reached target System Time Synchronized.
  749. [ OK ] Started Update UTMP about System Boot/Shutdown.
  750. [ OK ] Reached target System Initialization.
  751. [ OK ] Started Daily Cleanup of Temporary Directories.
  752. [ OK ] Listening on D-Bus System Message Bus Socket.
  753. [ OK ] Reached target Sockets.
  754. [ OK ] Reached target Basic System.
  755. Starting Permit User Sessions...
  756. Starting LSB: Start/stop sysstat's sadc...
  757. Starting Generate SSH keys if not there...
  758. [ OK ] Started D-Bus System Message Bus.
  759. [ 6.321525] rk_gmac-dwmac ff540000.eth: rk_get_eth_addr: mac address: 52:aa:d9:e3:ea:07
  760. Starting Save/Restore Sound Card State...
  761. Starting System Logging Service...
  762. Starting Network Manager...
  763. Starting LSB: Set the CPU Frequency Scaling governor to "ondemand"...
  764. Starting Login Service...
  765. [ OK ] Started Regular background program processing daemon.
  766. Starting Initializes zram swaping...
  767. Starting Rock 64 First boot...
  768. [ OK ] Started Set console font and keymap.
  769. [ OK ] Started Permit User Sessions.
  770. [ OK ] Started Save/Restore Sound Card State.
  771. [FAILED] Failed to start Initializes zram swaping.
  772. See 'systemctl status zram-config.service' for details.
  773. [ OK ] Started LSB: Start/stop sysstat's sadc.
  774. [ OK ] Started System Logging Service.
  775. Starting Set console scheme...
  776. [ OK ] Started Serial Getty on ttyFIQ0.
  777. [ OK ] Created slice system-getty.slice.
  778. [ OK ] Started Login Service.
  779. [ OK ] Started Raise network interfaces.
  780. [ OK ] Started LSB: Set the CPU Frequency Scaling governor to "ondemand".
  781. [ OK ] Started Set console scheme.
  782. [ OK ] Started Network Manager.
  783. [ OK ] Reached target Network.
  784. Starting Network Manager Wait Online...
  785. Starting Network Manager Script Dispatcher Service...
  786. [ OK ] Started Network Manager Script Dispatcher Service.
  787. Starting Hostname Service...
  788. [ OK ] Started Hostname Service.
  789. Starting Authenticate and Authorize Users to Run Privileged Tasks...
  790. [ OK ] Started Generate SSH keys if not there.
  791. Starting OpenBSD Secure Shell server...
  792. [ OK ] Started Authenticate and Authorize Users to Run Privileged Tasks.
  793. [ OK ] Started OpenBSD Secure Shell server.
  794. [ OK ] Started Rock 64 First boot.
  795.  
  796. Ubuntu 16.04.3 LTS rock64 ttyFIQ0
  797.  
  798. rock64 login:
Advertisement
Add Comment
Please, Sign In to add comment
Advertisement