API tools faq
paste
Advertisement
Guest User

dmesg

a guest
Sep 6th, 2012
218
0
Never
Add comment
Not a member of Pastebin yet? Sign Up, it unlocks many cool features!
text 12.99 KB | None | 0 0
raw download clone embed print report
  1. [ 0.000000] Initializing cgroup subsys cpu
  2. [ 0.000000] Linux version 3.2.27+ (dc4@dc4-arm-01) (gcc version 4.7.2 20120731 (prerelease) (crosstool-NG linaro-1.13.1+bzr2458 - Linaro GCC 2012.08) ) #114 PREEMPT Tue Sep 4 00:15:33 BST 2012
  3. [ 0.000000] CPU: ARMv6-compatible processor [410fb767] revision 7 (ARMv7), cr=00c5387d
  4. [ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT nonaliasing instruction cache
  5. [ 0.000000] Machine: BCM2708
  6. [ 0.000000] Memory policy: ECC disabled, Data cache writeback
  7. [ 0.000000] On node 0 totalpages: 32768
  8. [ 0.000000] free_area_init_node: node 0, pgdat c0504a88, node_mem_map c05ac000
  9. [ 0.000000] Normal zone: 256 pages used for memmap
  10. [ 0.000000] Normal zone: 0 pages reserved
  11. [ 0.000000] Normal zone: 32512 pages, LIFO batch:7
  12. [ 0.000000] pcpu-alloc: s0 r0 d32768 u32768 alloc=1*32768
  13. [ 0.000000] pcpu-alloc: [0] 0
  14. [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 32512
  15. [ 0.000000] Kernel command line: dma.dmachans=0x3c bcm2708_fb.fbwidth=656 bcm2708_fb.fbheight=512 bcm2708.boardrev=0x2 bcm2708.serial=0xe302784 smsc95xx.macaddr=B8:27:EB:30:27:84 dwc_otg.lpm_enable=0 console=ttyAMA0,115200 kgdboc=ttyAMA0,115200 console=tty1 root=/dev/mmcblk0p3 rootfstype=ext4 rootwait
  16. [ 0.000000] PID hash table entries: 512 (order: -1, 2048 bytes)
  17. [ 0.000000] Dentry cache hash table entries: 16384 (order: 4, 65536 bytes)
  18. [ 0.000000] Inode-cache hash table entries: 8192 (order: 3, 32768 bytes)
  19. [ 0.000000] Memory: 128MB = 128MB total
  20. [ 0.000000] Memory: 124092k/124092k available, 6980k reserved, 0K highmem
  21. [ 0.000000] Virtual kernel memory layout:
  22. [ 0.000000] vector : 0xffff0000 - 0xffff1000 ( 4 kB)
  23. [ 0.000000] fixmap : 0xfff00000 - 0xfffe0000 ( 896 kB)
  24. [ 0.000000] vmalloc : 0xc8800000 - 0xe8000000 ( 504 MB)
  25. [ 0.000000] lowmem : 0xc0000000 - 0xc8000000 ( 128 MB)
  26. [ 0.000000] modules : 0xbf000000 - 0xc0000000 ( 16 MB)
  27. [ 0.000000] .text : 0xc0008000 - 0xc04b9b34 (4807 kB)
  28. [ 0.000000] .init : 0xc04ba000 - 0xc04da000 ( 128 kB)
  29. [ 0.000000] .data : 0xc04da000 - 0xc0505120 ( 173 kB)
  30. [ 0.000000] .bss : 0xc0505144 - 0xc05abfc8 ( 668 kB)
  31. [ 0.000000] NR_IRQS:330
  32. [ 0.000000] sched_clock: 32 bits at 1000kHz, resolution 1000ns, wraps every 4294967ms
  33. [ 0.000000] timer_set_mode: unhandled mode:1
  34. [ 0.000000] timer_set_mode: unhandled mode:3
  35. [ 0.000000] Console: colour dummy device 80x30
  36. [ 0.000000] console [tty1] enabled
  37. [ 0.000686] Calibrating delay loop... 898.66 BogoMIPS (lpj=4493312)
  38. [ 0.090158] pid_max: default: 32768 minimum: 301
  39. [ 0.090521] Mount-cache hash table entries: 512
  40. [ 0.090898] Initializing cgroup subsys cpuacct
  41. [ 0.090970] Initializing cgroup subsys devices
  42. [ 0.090997] Initializing cgroup subsys freezer
  43. [ 0.091020] Initializing cgroup subsys blkio
  44. [ 0.091127] CPU: Testing write buffer coherency: ok
  45. [ 0.091394] hw perfevents: enabled with v6 PMU driver, 3 counters available
  46. [ 0.092298] devtmpfs: initialized
  47. [ 0.099542] NET: Registered protocol family 16
  48. [ 0.100758] vc_mem_connected_init: called
  49. [ 0.100820] vc_mem_update: resp 0, vcbase=0 vcsize=0 armbase=0 armsize=0
  50. [ 0.100859] vc-mem: mm_vc_mem_phys_addr = 0x00000000
  51. [ 0.100882] vc-mem: mm_vc_mem_size = 0x00000000 (0 MiB)
  52. [ 0.101217] hw-breakpoint: found 6 breakpoint and 1 watchpoint registers.
  53. [ 0.101259] hw-breakpoint: maximum watchpoint size is 4 bytes.
  54. [ 0.101289] mailbox: Broadcom VideoCore Mailbox driver
  55. [ 0.101358] bcm2708_vcio: mailbox at f200b880
  56. [ 0.101433] bcm_power: Broadcom power driver
  57. [ 0.101461] bcm_power_open() -> 0
  58. [ 0.101480] bcm_power_request(0, 8)
  59. [ 0.602068] bcm_mailbox_read -> 00000080, 0
  60. [ 0.602096] bcm_power_request -> 0
  61. [ 0.602116] Serial: AMBA PL011 UART driver
  62. [ 0.602236] dev:f1: ttyAMA0 at MMIO 0x20201000 (irq = 83) is a PL011 rev3
  63. [ 0.919491] console [ttyAMA0] enabled
  64. [ 0.938852] bio: create slab <bio-0> at 0
  65. [ 0.943790] SCSI subsystem initialized
  66. [ 0.947710] usbcore: registered new interface driver usbfs
  67. [ 0.953378] usbcore: registered new interface driver hub
  68. [ 0.958875] usbcore: registered new device driver usb
  69. [ 0.964635] Switching to clocksource stc
  70. [ 0.968807] FS-Cache: Loaded
  71. [ 0.971905] CacheFiles: Loaded
  72. [ 0.984042] NET: Registered protocol family 2
  73. [ 0.988825] IP route cache hash table entries: 1024 (order: 0, 4096 bytes)
  74. [ 0.996565] TCP established hash table entries: 4096 (order: 3, 32768 bytes)
  75. [ 1.003819] TCP bind hash table entries: 4096 (order: 2, 16384 bytes)
  76. [ 1.010361] TCP: Hash tables configured (established 4096 bind 4096)
  77. [ 1.016722] TCP reno registered
  78. [ 1.019896] UDP hash table entries: 256 (order: 0, 4096 bytes)
  79. [ 1.025762] UDP-Lite hash table entries: 256 (order: 0, 4096 bytes)
  80. [ 1.032411] NET: Registered protocol family 1
  81. [ 1.037347] RPC: Registered named UNIX socket transport module.
  82. [ 1.043423] RPC: Registered udp transport module.
  83. [ 1.048136] RPC: Registered tcp transport module.
  84. [ 1.052869] RPC: Registered tcp NFSv4.1 backchannel transport module.
  85. [ 1.059539] bcm2708_dma: DMA manager at c8808000
  86. [ 1.064244] bcm2708_gpio: bcm2708_gpio_probe c04e1c18
  87. [ 1.069625] vc-mem: Videocore memory driver
  88. [ 1.074382] audit: initializing netlink socket (disabled)
  89. [ 1.079887] type=2000 audit(0.760:1): initialized
  90. [ 1.170979] VFS: Disk quotas dquot_6.5.2
  91. [ 1.175060] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
  92. [ 1.182383] FS-Cache: Netfs 'nfs' registered for caching
  93. [ 1.188404] msgmni has been set to 242
  94. [ 1.193684] io scheduler noop registered
  95. [ 1.197636] io scheduler deadline registered
  96. [ 1.202136] io scheduler cfq registered (default)
  97. [ 1.207048] BCM2708FB: registering framebuffer (656x512@16)
  98. [ 1.213067] bcm2708_fb_set_par info(c78b8000) 656x512 (656x512), 0, 16
  99. [ 1.216778] BCM2708FB: start = c8900000,49385000 width=656, height=512, bpp=16, pitch=1312 size=671744 success=0
  100. [ 1.220409] Console: switching to colour frame buffer device 82x32
  101. [ 1.250825] BCM2708FB: register framebuffer (0)
  102. [ 1.257914] kgdb: Registered I/O driver kgdboc.
  103. [ 1.271552] brd: module loaded
  104. [ 1.280368] loop: module loaded
  105. [ 1.286281] vcos: [1]: vchiq_init_state: slot_zero = 0xffd80000, is_master = 0
  106. [ 1.295863] vcos: [1]: vchiq_init_state: called
  107. [ 1.303311] vcos: [1]: vchiq: initialised - version 2 (min 2), device 252.0
  108. [ 1.312987] usbcore: registered new interface driver smsc95xx
  109. [ 1.320999] cdc_ncm: 04-Aug-2011
  110. [ 1.326486] usbcore: registered new interface driver cdc_ncm
  111. [ 1.334360] dwc_otg: version 3.00a 10-AUG-2012 (platform bus)
  112. [ 1.542607] Core Release: 2.80a
  113. [ 1.547912] Setting default values for core params
  114. [ 1.554980] Finished setting default values for core params
  115. [ 1.763007] Using Buffer DMA mode
  116. [ 1.768478] Periodic Transfer Interrupt Enhancement - disabled
  117. [ 1.776519] Multiprocessor Interrupt Enhancement - disabled
  118. [ 1.784273] OTG VER PARAM: 0, OTG VER FLAG: 0
  119. [ 1.790820] Dedicated Tx FIFOs mode
  120. [ 1.796607] dwc_otg: Microframe scheduler enabled
  121. [ 1.796648] dwc_otg bcm2708_usb: DWC OTG Controller
  122. [ 1.803809] dwc_otg bcm2708_usb: new USB bus registered, assigned bus number 1
  123. [ 1.813479] dwc_otg bcm2708_usb: irq 75, io mem 0x00000000
  124. [ 1.821285] Init: Port Power? op_state=1
  125. [ 1.827377] Init: Power Port (0)
  126. [ 1.832841] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
  127. [ 1.841852] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
  128. [ 1.851249] usb usb1: Product: DWC OTG Controller
  129. [ 1.858037] usb usb1: Manufacturer: Linux 3.2.27+ dwc_otg_hcd
  130. [ 1.865913] usb usb1: SerialNumber: bcm2708_usb
  131. [ 1.873276] hub 1-0:1.0: USB hub found
  132. [ 1.879266] hub 1-0:1.0: 1 port detected
  133. [ 1.885774] dwc_otg: FIQ disabled
  134. [ 1.885796] Module dwc_common_port init
  135. [ 1.886053] usbcore: registered new interface driver uas
  136. [ 1.893561] Initializing USB Mass Storage driver...
  137. [ 1.900778] usbcore: registered new interface driver usb-storage
  138. [ 1.908925] USB Mass Storage support registered.
  139. [ 1.915780] usbcore: registered new interface driver libusual
  140. [ 1.923966] mousedev: PS/2 mouse device common for all mice
  141. [ 1.931696] cpuidle: using governor ladder
  142. [ 1.937863] cpuidle: using governor menu
  143. [ 1.943940] sdhci: Secure Digital Host Controller Interface driver
  144. [ 1.952218] sdhci: Copyright(c) Pierre Ossman
  145. [ 1.958761] sdhci: Enable low-latency mode
  146. [ 1.964867] bcm_power_open() -> 1
  147. [ 1.970406] Registered led device: mmc0::
  148. [ 1.971748] mmc0: SDHCI controller on BCM2708_Arasan [platform] using platform's DMA
  149. [ 1.983724] mmc0: BCM2708 SDHC host at 0x20300000 DMA 2 IRQ 77
  150. [ 1.991807] sdhci-pltfm: SDHCI platform and OF driver helper
  151. [ 2.000908] Registered led device: led0
  152. [ 2.001206] usbcore: registered new interface driver usbhid
  153. [ 2.009040] usbhid: USB HID core driver
  154. [ 2.015907] TCP cubic registered
  155. [ 2.021364] Initializing XFRM netlink socket
  156. [ 2.029904] NET: Registered protocol family 17
  157. [ 2.039642] Registering the dns_resolver key type
  158. [ 2.048641] VFP support v0.3: implementor 41 architecture 1 part 20 variant b rev 5
  159. [ 2.067414] registered taskstats version 1
  160. [ 2.075895] drivers/rtc/hctosys.c: unable to open rtc device (rtc0)
  161. [ 2.084602] Indeed it is in host mode hprt0 = 00021501
  162. [ 2.093580] Waiting for root device /dev/mmcblk0p3...
  163. [ 2.124965] mmc0: problem reading SD Status register.
  164. [ 2.146018] mmc0: new high speed SDHC card at address b368
  165. [ 2.168693] mmcblk0: mmc0:b368 00000 7.51 GiB
  166. [ 2.177243] mmcblk0: p1 p2 p3
  167. [ 2.241045] EXT4-fs (mmcblk0p3): mounted filesystem without journal. Opts: (null)
  168. [ 2.253116] VFS: Mounted root (ext4 filesystem) on device 179:3.
  169. [ 2.265134] devtmpfs: mounted
  170. [ 2.271122] Freeing init memory: 128K
  171. [ 2.308685] usb 1-1: new high-speed USB device number 2 using dwc_otg
  172. [ 2.317599] Indeed it is in host mode hprt0 = 00001101
  173. [ 2.528904] usb 1-1: New USB device found, idVendor=0424, idProduct=9512
  174. [ 2.537911] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
  175. [ 2.548690] hub 1-1:1.0: USB hub found
  176. [ 2.555825] hub 1-1:1.0: 3 ports detected
  177. [ 2.838804] usb 1-1.1: new high-speed USB device number 3 using dwc_otg
  178. [ 2.959181] usb 1-1.1: New USB device found, idVendor=0424, idProduct=ec00
  179. [ 2.968475] usb 1-1.1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
  180. [ 2.982508] smsc95xx v1.0.4
  181. [ 3.043597] smsc95xx 1-1.1:1.0: eth0: register 'smsc95xx' at usb-bcm2708_usb-1.1, smsc95xx USB 2.0 Ethernet, b8:27:eb:30:27:84
  182. [ 3.138834] usb 1-1.3: new high-speed USB device number 4 using dwc_otg
  183. [ 3.260487] usb 1-1.3: New USB device found, idVendor=05e3, idProduct=0608
  184. [ 3.278699] usb 1-1.3: New USB device strings: Mfr=0, Product=1, SerialNumber=0
  185. [ 3.288457] usb 1-1.3: Product: USB2.0 Hub
  186. [ 3.312469] hub 1-1.3:1.0: USB hub found
  187. [ 3.329082] hub 1-1.3:1.0: 4 ports detected
  188. [ 3.554322] udevd[118]: starting version 175
  189. [ 3.619088] usb 1-1.3.2: new full-speed USB device number 5 using dwc_otg
  190. [ 3.741741] usb 1-1.3.2: New USB device found, idVendor=046d, idProduct=c52b
  191. [ 3.760393] usb 1-1.3.2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
  192. [ 3.801408] usb 1-1.3.2: Product: USB Receiver
  193. [ 3.808292] usb 1-1.3.2: Manufacturer: Logitech
  194. [ 4.457649] bcm2708_i2c bcm2708_i2c.0: BSC0 Controller at 0x20205000 (irq 79)
  195. [ 4.494239] logitech-djreceiver 0003:046D:C52B.0003: hiddev0: USB HID v1.11 Device [Logitech USB Receiver] on usb-bcm2708_usb-1.3.2/input2
  196. [ 4.558563] bcm2708_spi bcm2708_spi.0: SPI Controller at 0x20204000 (irq 80)
  197. [ 4.607179] bcm2708_i2c bcm2708_i2c.1: BSC1 Controller at 0x20804000 (irq 79)
  198. [ 4.637783] input: Logitech Unifying Device. Wireless PID:400e as /devices/platform/bcm2708_usb/usb1/1-1/1-1.3/1-1.3.2/1-1.3.2:1.2/0003:046D:C52B.0003/input/input0
  199. [ 4.690658] logitech-djdevice 0003:046D:C52B.0004: input: USB HID v1.11 Keyboard [Logitech Unifying Device. Wireless PID:400e] on usb-bcm2708_usb-1.3.2:1
  200. [ 11.350192] EXT4-fs (mmcblk0p3): re-mounted. Opts: (null)
  201. [ 11.863524] EXT4-fs (mmcblk0p3): re-mounted. Opts: errors=remount-ro
  202. [ 12.134735] ### snd_bcm2835_alsa_probe c04e2430 ############### PROBING FOR bcm2835 ALSA device (0):(1) ###############
  203. [ 12.150828] Creating card...
  204. [ 12.156363] Creating device/chip ..
  205. [ 12.162809] Adding controls ..
  206. [ 12.168389] Registering card ....
  207. [ 12.180698] bcm2835 ALSA CARD CREATED!
  208. [ 12.187536] ### BCM2835 ALSA driver init OK ###
  209. [ 15.641312] NET: Registered protocol family 10
  210. [ 16.053176] ADDRCONF(NETDEV_UP): eth0: link is not ready
  211. [ 16.721547] Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
  212. [ 17.671891] ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
  213. [ 17.680963] smsc95xx 1-1.1:1.0: eth0: link up, 100Mbps, full-duplex, lpa 0x45E1
Advertisement
Add Comment
Please, Sign In to add comment
Advertisement
Public Pastes
Advertisement
We use cookies for various purposes including analytics. By continuing to use Pastebin, you agree to our use of cookies as described in the Cookies Policy.  OK, I Understand
Not a member of Pastebin yet?
Sign Up, it unlocks many cool features!