Advertisement
Not a member of Pastebin yet?
Sign Up,
it unlocks many cool features!
- [admin@MikroTik] > export hide-sensitive
- # 2024-07-26 19:26:29 by RouterOS 7.15.2
- # software id = X473-B5HU
- #
- # model = C53UiG+5HPaxD2HPaxD
- # serial number = HF7066651D7
- /interface bridge
- add admin-mac=78:00:00:8C:24:F4 auto-mac=no comment=defconf name=bridge port-cost-mode=short
- /interface wifi
- set [ find default-name=wifi2 ] channel.skip-dfs-channels=10min-cac configuration.antenna-gain=3 .country=usa .mode=ap .ssid=testssid disabled=no security.authentication-types=\
- wpa2-psk,wpa3-psk .wps=disable
- /interface pppoe-client
- add add-default-route=yes disabled=no interface=ether5 name=pppoe-out1 user=pppoe-111111
- /interface wifi
- add configuration.mode=ap .ssid=virtwifi disabled=no mac-address=7A:9A:18:8C:24:FA master-interface=wifi2 name=virtwifi security.authentication-types=wpa2-psk,wpa3-psk .wps=disable
- /interface list
- add comment=defconf name=WAN
- add comment=defconf name=LAN
- /interface wifi channel
- add disabled=no frequency=5180-5320,5580-5785 name=ch-5ghz width=20/40/80mhz
- /interface wifi
- set [ find default-name=wifi1 ] channel=ch-5ghz channel.band=5ghz-ax .skip-dfs-channels=all .width=20/40/80mhz configuration.antenna-gain=5 .country=usa .mode=ap .ssid=\
- "\F0\9F\8C\8A\F0\9F\90\9F\F0\9F\8C\8A" disabled=no security.authentication-types=wpa2-psk,wpa3-psk .wps=disable
- /ip pool
- add name=default-dhcp ranges=192.168.0.20-192.168.0.254
- /ip dhcp-server
- add address-pool=default-dhcp interface=bridge lease-time=10m name=defconf
- /zerotier
- set zt1 comment="ZeroTier Central controller - https://my.zerotier.com/" disabled=yes disabled=yes name=zt1 port=9993
- /interface bridge port
- add bridge=bridge comment=defconf interface=ether2 internal-path-cost=10 path-cost=10
- add bridge=bridge comment=defconf interface=ether3 internal-path-cost=10 path-cost=10
- add bridge=bridge comment=defconf interface=ether4 internal-path-cost=10 path-cost=10
- add bridge=bridge comment=defconf interface=wifi1 internal-path-cost=10 path-cost=10
- add bridge=bridge comment=defconf interface=wifi2 internal-path-cost=10 path-cost=10
- add bridge=bridge interface=ether1 internal-path-cost=10 path-cost=10
- add bridge=bridge interface=virtwifi
- /ip firewall connection tracking
- set udp-timeout=10s
- /ip neighbor discovery-settings
- set discover-interface-list=LAN
- /interface list member
- add comment=defconf interface=bridge list=LAN
- add comment=defconf interface=ether5 list=WAN
- add interface=pppoe-out1 list=WAN
- /ip address
- add address=192.168.0.1/24 comment=defconf interface=bridge network=192.168.0.0
- add address=172.168.0.2/24 interface=ether5 network=172.168.0.0
- /ip cloud
- set ddns-enabled=yes
- /ip dhcp-client
- add add-default-route=no interface=ether5
- /ip dhcp-server lease
- add address=192.168.0.6 client-id=1:b8:27:eb:94:ae:53 mac-address=B8:27:EB:94:AE:53 server=defconf
- /ip dhcp-server network
- add address=192.168.0.0/24 comment=defconf dns-server=192.168.0.1 gateway=192.168.0.1
- /ip dns
- set allow-remote-requests=yes servers=1.1.1.1,8.8.8.8
- /ip dns static
- add address=192.168.88.1 comment=defconf name=router.lan
- /ip firewall filter
- add action=accept chain=input comment="defconf: accept established,related,untracked" connection-state=established,related,untracked
- add action=drop chain=input comment="defconf: drop invalid" connection-state=invalid
- add action=accept chain=input comment="defconf: accept ICMP" protocol=icmp
- add action=accept chain=input comment="defconf: accept to local loopback (for CAPsMAN)" dst-address=127.0.0.1
- add action=drop chain=input comment="defconf: drop all not coming from LAN" in-interface-list=!LAN log=yes
- add action=accept chain=forward comment="defconf: accept in ipsec policy" ipsec-policy=in,ipsec
- add action=accept chain=forward comment="defconf: accept out ipsec policy" ipsec-policy=out,ipsec
- add action=fasttrack-connection chain=forward comment="defconf: fasttrack" connection-state=established,related hw-offload=yes
- add action=accept chain=forward comment="defconf: accept established,related, untracked" connection-state=established,related,untracked
- add action=drop chain=forward comment="defconf: drop invalid" connection-state=invalid
- add action=drop chain=forward comment="defconf: drop all from WAN not DSTNATed" connection-nat-state=!dstnat connection-state=new in-interface-list=WAN
- /ip firewall mangle
- add action=mark-packet chain=prerouting comment="NAT Loopback detect" connection-state=new dst-address=11.33.59.22 in-interface-list=LAN new-packet-mark=nat-loopback passthrough=yes
- /ip firewall nat
- add action=masquerade chain=srcnat comment="defconf: masquerade" ipsec-policy=out,none out-interface-list=WAN
- add action=dst-nat chain=dstnat comment="FRP reverse proxy" dst-address=11.33.59.22 dst-port=7000-7100 protocol=tcp to-addresses=192.168.0.9 to-ports=7000-7100
- add action=dst-nat chain=dstnat comment="FRP reverse proxy" dst-address=11.33.59.22 dst-address-list="" dst-port=7000-7100 protocol=udp to-addresses=192.168.0.9 to-ports=7000-7100
- add action=dst-nat chain=dstnat comment="Rust Desk" dst-port=21114-21120 in-interface-list=WAN protocol=tcp to-addresses=192.168.0.9 to-ports=21114-21120
- add action=dst-nat chain=dstnat comment="Rust Desk" dst-port=21114-21120 in-interface-list=WAN protocol=udp to-addresses=192.168.0.9 to-ports=21114-21120
- add action=dst-nat chain=dstnat comment="Gotify notification" dst-port=9999 in-interface-list=WAN protocol=tcp to-addresses=192.168.0.6 to-ports=9999
- add action=dst-nat chain=dstnat comment="Gotify notification" dst-port=9999 in-interface-list=WAN protocol=udp to-addresses=192.168.0.6 to-ports=9999
- add action=dst-nat chain=dstnat comment="Wireguard raspberry" dst-port=51820 in-interface-list=WAN protocol=tcp to-addresses=192.168.0.6 to-ports=51820
- add action=dst-nat chain=dstnat comment="Wireguard raspberry" dst-port=51820 in-interface-list=WAN protocol=udp to-addresses=192.168.0.6 to-ports=51820
- add action=masquerade chain=srcnat comment="NAT Loopback replace address" packet-mark=nat-loopback
- /ipv6 firewall address-list
- add address=::/128 comment="defconf: unspecified address" list=bad_ipv6
- add address=::1/128 comment="defconf: lo" list=bad_ipv6
- add address=fec0::/10 comment="defconf: site-local" list=bad_ipv6
- add address=::ffff:0.0.0.0/96 comment="defconf: ipv4-mapped" list=bad_ipv6
- add address=::/96 comment="defconf: ipv4 compat" list=bad_ipv6
- add address=100::/64 comment="defconf: discard only " list=bad_ipv6
- add address=2001:db8::/32 comment="defconf: documentation" list=bad_ipv6
- add address=2001:10::/28 comment="defconf: ORCHID" list=bad_ipv6
- add address=3ffe::/16 comment="defconf: 6bone" list=bad_ipv6
- /ipv6 firewall filter
- add action=accept chain=input comment="defconf: accept established,related,untracked" connection-state=established,related,untracked
- add action=drop chain=input comment="defconf: drop invalid" connection-state=invalid
- add action=accept chain=input comment="defconf: accept ICMPv6" protocol=icmpv6
- add action=accept chain=input comment="defconf: accept UDP traceroute" port=33434-33534 protocol=udp
- add action=accept chain=input comment="defconf: accept DHCPv6-Client prefix delegation." dst-port=546 protocol=udp src-address=fe80::/10
- add action=accept chain=input comment="defconf: accept IKE" dst-port=500,4500 protocol=udp
- add action=accept chain=input comment="defconf: accept ipsec AH" protocol=ipsec-ah
- add action=accept chain=input comment="defconf: accept ipsec ESP" protocol=ipsec-esp
- add action=accept chain=input comment="defconf: accept all that matches ipsec policy" ipsec-policy=in,ipsec
- add action=drop chain=input comment="defconf: drop everything else not coming from LAN" in-interface-list=!LAN
- add action=accept chain=forward comment="defconf: accept established,related,untracked" connection-state=established,related,untracked
- add action=drop chain=forward comment="defconf: drop invalid" connection-state=invalid
- add action=drop chain=forward comment="defconf: drop packets with bad src ipv6" src-address-list=bad_ipv6
- add action=drop chain=forward comment="defconf: drop packets with bad dst ipv6" dst-address-list=bad_ipv6
- add action=drop chain=forward comment="defconf: rfc4890 drop hop-limit=1" hop-limit=equal:1 protocol=icmpv6
- add action=accept chain=forward comment="defconf: accept ICMPv6" protocol=icmpv6
- add action=accept chain=forward comment="defconf: accept HIP" protocol=139
- add action=accept chain=forward comment="defconf: accept IKE" dst-port=500,4500 protocol=udp
- add action=accept chain=forward comment="defconf: accept ipsec AH" protocol=ipsec-ah
- add action=accept chain=forward comment="defconf: accept ipsec ESP" protocol=ipsec-esp
- add action=accept chain=forward comment="defconf: accept all that matches ipsec policy" ipsec-policy=in,ipsec
- add action=drop chain=forward comment="defconf: drop everything else not coming from LAN" in-interface-list=!LAN
- /system clock
- set time-zone-name=Asia/Vladivostok
- /system note
- set show-at-login=no
- /system routerboard wps-button
- set enabled=yes on-event="/system/script/run wps-wifi-off"
- /system script
- add dont-require-permissions=yes name=wps-wifi-off owner=admin policy=ftp,reboot,read,write,policy,test,password,sniff,sensitive,romon source=":if ([/interface wifi get wifi1 disabled]=no) do={\r\
- \n\t/interface wifi disable [find]\r\
- \n\t:log info message=\"Wifi turned off\"\r\
- \n\t} else={\r\
- \n\t/interface wifi enable [find]\r\
- \n\t:log info message=\"Wifi turned on\"\r\
- \n}"
- /tool mac-server
- set allowed-interface-list=LAN
- /tool mac-server mac-winbox
- set allowed-interface-list=LAN
- [admin@MikroTik] >
Advertisement
Add Comment
Please, Sign In to add comment
Advertisement