API tools faq
paste
Guest User

McBin Shell boot

a guest
Mar 23rd, 2018
33
0
Never
Add comment
Not a member of Pastebin yet? Sign Up, it unlocks many cool features!
text 29.38 KB | None | 0 0
raw download clone embed print report
  1. Shell> fs0:
  2. FS0:\> Image root=/dev/sdc2 rw rootwait
  3. EFI stub: Booting Linux Kernel...
  4. EFI stub: Using DTB from configuration table
  5. EFI stub: Exiting boot services and installing virtual address map...
  6. [ 0.000000] Booting Linux on physical CPU 0x0000000000 [0x410fd081]
  7. [ 0.000000] Linux version 4.16.0-rc4-14984-gd7ee85b-dirty (mw@gilgamesh) (gcc version 7.2.1 20171011 (Linaro GCC 7.2-2017.11)) #12 SMP PREEMPT Thu Mar 22 16:38:42 CET 2018
  8. [ 0.000000] Machine model: Marvell 8040 MACHIATOBin
  9. [ 0.000000] efi: Getting EFI parameters from FDT:
  10. [ 0.000000] efi: EFI v2.70 by EDK II
  11. [ 0.000000] efi: SMBIOS 3.0=0xbfd00000 ACPI 2.0=0xb6760000 MEMATTR=0xb73f9418 RNG=0xbffdbf98
  12. [ 0.000000] random: fast init done
  13. [ 0.000000] efi: seeding entropy pool
  14. [ 0.000000] cma: Reserved 16 MiB at 0x00000000be800000
  15. [ 0.000000] NUMA: No NUMA configuration found
  16. [ 0.000000] NUMA: Faking a node at [mem 0x0000000000000000-0x000000023fffffff]
  17. [ 0.000000] NUMA: NODE_DATA [mem 0x23ffd5c00-0x23ffd76ff]
  18. [ 0.000000] Zone ranges:
  19. [ 0.000000] DMA32 [mem 0x0000000000000000-0x00000000ffffffff]
  20. [ 0.000000] Normal [mem 0x0000000100000000-0x000000023fffffff]
  21. [ 0.000000] Movable zone start for each node
  22. [ 0.000000] Early memory node ranges
  23. [ 0.000000] node 0: [mem 0x0000000000000000-0x0000000003ffffff]
  24. [ 0.000000] node 0: [mem 0x0000000004200000-0x00000000bf80ffff]
  25. [ 0.000000] node 0: [mem 0x00000000bf810000-0x00000000bfbeffff]
  26. [ 0.000000] node 0: [mem 0x00000000bfbf0000-0x00000000bfbfffff]
  27. [ 0.000000] node 0: [mem 0x00000000bfc00000-0x00000000bffdffff]
  28. [ 0.000000] node 0: [mem 0x00000000bffe0000-0x00000000bfffffff]
  29. [ 0.000000] node 0: [mem 0x0000000100000000-0x000000023fffffff]
  30. [ 0.000000] Initmem setup node 0 [mem 0x0000000000000000-0x000000023fffffff]
  31. [ 0.000000] psci: probing for conduit method from DT.
  32. [ 0.000000] psci: PSCIv1.0 detected in firmware.
  33. [ 0.000000] psci: Using standard PSCI v0.2 function IDs
  34. [ 0.000000] psci: MIGRATE_INFO_TYPE not supported.
  35. [ 0.000000] psci: SMC Calling Convention v1.0
  36. [ 0.000000] percpu: Embedded 24 pages/cpu @ (ptrval) s57880 r8192 d32232 u98304
  37. [ 0.000000] Detected PIPT I-cache on CPU0
  38. [ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 2063880
  39. [ 0.000000] Policy zone: Normal
  40. [ 0.000000] Kernel command line: Image root=/dev/sdc2 rw rootwait
  41. [ 0.000000] software IO TLB [mem 0xba800000-0xbe800000] (64MB) mapped at [ (ptrval)- (ptrval)]
  42. [ 0.000000] Memory: 8144316K/8386560K available (10236K kernel code, 1258K rwdata, 4604K rodata, 1152K init, 402K bss, 225860K reserved, 16384K cma-reserved)
  43. [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
  44. [ 0.000000] Preemptible hierarchical RCU implementation.
  45. [ 0.000000] RCU restricting CPUs from NR_CPUS=64 to nr_cpu_ids=4.
  46. [ 0.000000] Tasks RCU enabled.
  47. [ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4
  48. [ 0.000000] NR_IRQS: 64, nr_irqs: 64, preallocated irqs: 0
  49. [ 0.000000] GIC: Adjusting CPU interface base to 0x00000000f022f000
  50. [ 0.000000] GIC: Using split EOI/Deactivate mode
  51. [ 0.000000] GICv2m: DT overriding V2M MSI_TYPER (base:160, num:32)
  52. [ 0.000000] GICv2m: range[mem 0xf0280000-0xf0280fff], SPI[160:191]
  53. [ 0.000000] GICv2m: DT overriding V2M MSI_TYPER (base:192, num:32)
  54. [ 0.000000] GICv2m: range[mem 0xf0290000-0xf0290fff], SPI[192:223]
  55. [ 0.000000] GICv2m: DT overriding V2M MSI_TYPER (base:224, num:32)
  56. [ 0.000000] GICv2m: range[mem 0xf02a0000-0xf02a0fff], SPI[224:255]
  57. [ 0.000000] GICv2m: DT overriding V2M MSI_TYPER (base:256, num:32)
  58. [ 0.000000] GICv2m: range[mem 0xf02b0000-0xf02b0fff], SPI[256:287]
  59. [ 0.000000] arch_timer: cp15 timer(s) running at 25.00MHz (phys).
  60. [ 0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x5c40939b5, max_idle_ns: 440795202646 ns
  61. [ 0.000001] sched_clock: 56 bits at 25MHz, resolution 40ns, wraps every 4398046511100ns
  62. [ 0.000134] Console: colour dummy device 80x25
  63. [ 0.000282] console [tty0] enabled
  64. [ 0.000303] Calibrating delay loop (skipped), value calculated using timer frequency.. 50.00 BogoMIPS (lpj=100000)
  65. [ 0.000311] pid_max: default: 32768 minimum: 301
  66. [ 0.000336] Security Framework initialized
  67. [ 0.001875] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes)
  68. [ 0.002656] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes)
  69. [ 0.002700] Mount-cache hash table entries: 16384 (order: 5, 131072 bytes)
  70. [ 0.002731] Mountpoint-cache hash table entries: 16384 (order: 5, 131072 bytes)
  71. [ 0.016012] ASID allocator initialised with 32768 entries
  72. [ 0.024009] Hierarchical SRCU implementation.
  73. [ 0.032456] Remapping and enabling EFI services.
  74. [ 0.032532] EFI remap 0x00000000bf810000 => (ptrval)
  75. [ 0.032595] EFI remap 0x00000000bfc00000 => (ptrval)
  76. [ 0.032600] EFI remap 0x00000000f4284000 => (ptrval)
  77. [ 0.032605] EFI remap 0x00000000f4700000 => (ptrval)
  78. [ 0.032614] EFI remap 0x00000000f93c0000 => (ptrval)
  79. [ 0.040022] smp: Bringing up secondary CPUs ...
  80. [ 0.068194] Detected PIPT I-cache on CPU1
  81. [ 0.068222] CPU1: Booted secondary processor 0x0000000001 [0x410fd081]
  82. [ 0.096208] Detected PIPT I-cache on CPU2
  83. [ 0.096228] CPU2: Booted secondary processor 0x0000000100 [0x410fd081]
  84. [ 0.124229] Detected PIPT I-cache on CPU3
  85. [ 0.124242] CPU3: Booted secondary processor 0x0000000101 [0x410fd081]
  86. [ 0.124276] smp: Brought up 1 node, 4 CPUs
  87. [ 0.124297] SMP: Total of 4 processors activated.
  88. [ 0.124301] CPU features: detected feature: 32-bit EL0 Support
  89. [ 0.124306] CPU features: detected feature: Kernel page table isolation (KPTI)
  90. [ 0.128952] CPU: All CPU(s) started at EL2
  91. [ 0.128965] alternatives: patching kernel code
  92. [ 0.129684] devtmpfs: initialized
  93. [ 0.130930] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns
  94. [ 0.130956] futex hash table entries: 1024 (order: 5, 131072 bytes)
  95. [ 0.131119] pinctrl core: initialized pinctrl subsystem
  96. [ 0.131504] SMBIOS 3.0.0 present.
  97. [ 0.131515] DMI: Marvell Armada 8040 MacchiatoBin/Armada 8040 MacchiatoBin, BIOS EDK II Mar 19 2018
  98. [ 0.131634] NET: Registered protocol family 16
  99. [ 0.131758] audit: initializing netlink subsys (disabled)
  100. [ 0.131819] audit: type=2000 audit(0.128:1): state=initialized audit_enabled=0 res=1
  101. [ 0.132866] cpuidle: using governor menu
  102. [ 0.132954] vdso: 2 pages (1 code @ 0000000008ad09ea, 1 data @ 0000000020e14e81)
  103. [ 0.132966] hw-breakpoint: found 6 breakpoint and 4 watchpoint registers.
  104. [ 0.133370] DMA: preallocated 256 KiB pool for atomic allocations
  105. [ 0.133664] Serial: AMBA PL011 UART driver
  106. [ 0.140037] HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages
  107. [ 0.140283] cryptd: max_cpu_qlen set to 1000
  108. [ 0.144470] ACPI: Interpreter disabled.
  109. [ 0.144795] reg-fixed-voltage regulator-usb3-vbus0: could not find pctldev for node /cp0/config-space@f2000000/system-controller@440000/pinctrl/xhci0-vbus-pins, deferring probe
  110. [ 0.144988] vgaarb: loaded
  111. [ 0.145087] SCSI subsystem initialized
  112. [ 0.145242] usbcore: registered new interface driver usbfs
  113. [ 0.145262] usbcore: registered new interface driver hub
  114. [ 0.145283] usbcore: registered new device driver usb
  115. [ 0.145662] pps_core: LinuxPPS API ver. 1 registered
  116. [ 0.145668] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <[email protected]>
  117. [ 0.145678] PTP clock support registered
  118. [ 0.145731] EDAC MC: Ver: 3.0.0
  119. [ 0.145916] Registered efivars operations
  120. [ 0.146274] Advanced Linux Sound Architecture Driver Initialized.
  121. [ 0.146529] clocksource: Switched to clocksource arch_sys_counter
  122. [ 0.146583] VFS: Disk quotas dquot_6.6.0
  123. [ 0.146606] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
  124. [ 0.146662] pnp: PnP ACPI: disabled
  125. [ 0.149108] NET: Registered protocol family 2
  126. [ 0.149322] tcp_listen_portaddr_hash hash table entries: 4096 (order: 4, 65536 bytes)
  127. [ 0.149372] TCP established hash table entries: 65536 (order: 7, 524288 bytes)
  128. [ 0.149554] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
  129. [ 0.149903] TCP: Hash tables configured (established 65536 bind 65536)
  130. [ 0.149977] UDP hash table entries: 4096 (order: 5, 131072 bytes)
  131. [ 0.150014] UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes)
  132. [ 0.150104] NET: Registered protocol family 1
  133. [ 0.150304] net_namespace: Pernet operations sunrpc_net_ops are sync.
  134. [ 0.150320] RPC: Registered named UNIX socket transport module.
  135. [ 0.150324] RPC: Registered udp transport module.
  136. [ 0.150328] RPC: Registered tcp transport module.
  137. [ 0.150332] RPC: Registered tcp NFSv4.1 backchannel transport module.
  138. [ 0.150591] hw perfevents: unable to count PMU IRQs
  139. [ 0.150599] hw perfevents: /ap806/config-space@f0000000/pmu: failed to register PMU devices!
  140. [ 0.150722] kvm [1]: 8-bit VMID
  141. [ 0.150727] kvm [1]: IDMAP page: a68000
  142. [ 0.150731] kvm [1]: HYP VA range: 800000000000:ffffffffffff
  143. [ 0.151233] kvm [1]: vgic-v2@f0240000
  144. [ 0.151281] kvm [1]: vgic interrupt IRQ1
  145. [ 0.151308] kvm [1]: virtual timer IRQ4
  146. [ 0.151350] kvm [1]: Hyp mode initialized successfully
  147. [ 0.152469] Initialise system trusted keyrings
  148. [ 0.152530] workingset: timestamp_bits=44 max_order=21 bucket_order=0
  149. [ 0.154617] squashfs: version 4.0 (2009/01/31) Phillip Lougher
  150. [ 0.155563] NFS: Registering the id_resolver key type
  151. [ 0.155578] Key type id_resolver registered
  152. [ 0.155583] Key type id_legacy registered
  153. [ 0.155590] nfs4filelayout_init: NFSv4 File Layout Driver Registering...
  154. [ 0.155656] 9p: Installing v9fs 9p2000 file system support
  155. [ 0.156560] Key type asymmetric registered
  156. [ 0.156567] Asymmetric key parser 'x509' registered
  157. [ 0.156623] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 245)
  158. [ 0.156630] io scheduler noop registered
  159. [ 0.156693] io scheduler cfq registered (default)
  160. [ 0.156698] io scheduler mq-deadline registered
  161. [ 0.156702] io scheduler kyber registered
  162. [ 0.159123] armada-ap806-pinctrl f06f4000.system-controller:pinctrl: registered pinctrl driver
  163. [ 0.159378] armada-cp110-pinctrl f2440000.system-controller:pinctrl: registered pinctrl driver
  164. [ 0.159545] armada-cp110-pinctrl f4440000.system-controller:pinctrl: registered pinctrl driver
  165. [ 0.161734] EINJ: ACPI disabled.
  166. [ 0.163587] mv_xor_v2 f0400000.xor: Marvell Version 2 XOR driver
  167. [ 0.163802] mv_xor_v2 f0420000.xor: Marvell Version 2 XOR driver
  168. [ 0.164021] mv_xor_v2 f0440000.xor: Marvell Version 2 XOR driver
  169. [ 0.164217] mv_xor_v2 f0460000.xor: Marvell Version 2 XOR driver
  170. [ 0.164458] mv_xor_v2 f26a0000.xor: Marvell Version 2 XOR driver
  171. [ 0.164661] mv_xor_v2 f26c0000.xor: Marvell Version 2 XOR driver
  172. [ 0.164959] mv_xor_v2 f46a0000.xor: Marvell Version 2 XOR driver
  173. [ 0.165165] mv_xor_v2 f46c0000.xor: Marvell Version 2 XOR driver
  174. [ 0.167695] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
  175. [ 0.188725] f0512000.serial: ttyS0 at MMIO 0xf0512000 (irq = 7, base_baud = 12500000) is a 16550A
  176. [ 1.175091] console [ttyS0] enabled
  177. [ 1.179061] SuperH (H)SCI(F) driver initialized
  178. [ 1.183800] msm_serial: driver initialized
  179. [ 1.188198] cacheinfo: Unable to detect cache hierarchy for CPU 0
  180. [ 1.196439] loop: module loaded
  181. [ 1.200203] ahci f2540000.sata: AHCI 0001.0000 32 slots 2 ports 6 Gbps 0x3 impl platform mode
  182. [ 1.208781] ahci f2540000.sata: flags: 64bit ncq sntf led only pmp fbs pio slum part sxs
  183. [ 1.217466] scsi host0: ahci
  184. [ 1.220513] scsi host1: ahci
  185. [ 1.223484] ata1: SATA max UDMA/133 mmio [mem 0xf2540000-0xf256ffff] port 0x100 irq 26
  186. [ 1.231445] ata2: SATA max UDMA/133 mmio [mem 0xf2540000-0xf256ffff] port 0x180 irq 26
  187. [ 1.239586] ahci f4540000.sata: AHCI 0001.0000 32 slots 2 ports 6 Gbps 0x3 impl platform mode
  188. [ 1.248161] ahci f4540000.sata: flags: 64bit ncq sntf led only pmp fbs pio slum part sxs
  189. [ 1.256853] scsi host2: ahci
  190. [ 1.259860] scsi host3: ahci
  191. [ 1.262809] ata3: SATA max UDMA/133 mmio [mem 0xf4540000-0xf456ffff] port 0x100 irq 27
  192. [ 1.270767] ata4: SATA max UDMA/133 mmio [mem 0xf4540000-0xf456ffff] port 0x180 irq 27
  193. [ 1.279922] libphy: Fixed MDIO Bus: probed
  194. [ 1.284253] tun: Universal TUN/TAP device driver, 1.6
  195. [ 1.289704] thunder_xcv, ver 1.0
  196. [ 1.292973] thunder_bgx, ver 1.0
  197. [ 1.296230] nicpf, ver 1.0
  198. [ 1.299080] e1000e: Intel(R) PRO/1000 Network Driver - 3.2.6-k
  199. [ 1.304944] e1000e: Copyright(c) 1999 - 2015 Intel Corporation.
  200. [ 1.310911] igb: Intel(R) Gigabit Ethernet Network Driver - version 5.4.0-k
  201. [ 1.317907] igb: Copyright (c) 2007-2014 Intel Corporation.
  202. [ 1.323519] igbvf: Intel(R) Gigabit Virtual Function Network Driver - version 2.4.0-k
  203. [ 1.331388] igbvf: Copyright (c) 2009 - 2012 Intel Corporation.
  204. [ 1.337478] libphy: orion_mdio_bus: probed
  205. [ 1.341944] libphy: orion_mdio_bus: probed
  206. [ 1.356812] mvpp2 f2000000.ethernet eth0: Using random mac address aa:71:97:4c:a2:a0
  207. [ 1.372751] mvpp2 f4000000.ethernet eth1: Using random mac address e2:d0:92:f9:60:8e
  208. [ 1.381980] mvpp2 f4000000.ethernet eth2: Using random mac address b6:b0:3d:52:e4:d3
  209. [ 1.389854] sky2: driver version 1.30
  210. [ 1.393826] VFIO - User Level meta-driver version: 0.3
  211. [ 1.399475] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
  212. [ 1.406042] ehci-pci: EHCI PCI platform driver
  213. [ 1.410532] ehci-platform: EHCI generic platform driver
  214. [ 1.415846] ehci-orion: EHCI orion driver
  215. [ 1.419929] ehci-exynos: EHCI EXYNOS driver
  216. [ 1.424180] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
  217. [ 1.430401] ohci-pci: OHCI PCI platform driver
  218. [ 1.434885] ohci-platform: OHCI generic platform driver
  219. [ 1.440191] ohci-exynos: OHCI EXYNOS driver
  220. [ 1.444660] xhci-hcd f2500000.usb3: xHCI Host Controller
  221. [ 1.450017] xhci-hcd f2500000.usb3: new USB bus registered, assigned bus number 1
  222. [ 1.457780] xhci-hcd f2500000.usb3: hcc params 0x0a000990 hci version 0x100 quirks 0x00010010
  223. [ 1.466369] xhci-hcd f2500000.usb3: irq 46, io mem 0xf2500000
  224. [ 1.472421] hub 1-0:1.0: USB hub found
  225. [ 1.476202] hub 1-0:1.0: 1 port detected
  226. [ 1.480236] xhci-hcd f2500000.usb3: xHCI Host Controller
  227. [ 1.485580] xhci-hcd f2500000.usb3: new USB bus registered, assigned bus number 2
  228. [ 1.493123] usb usb2: We don't know the algorithms for LPM for this host, disabling LPM.
  229. [ 1.501403] hub 2-0:1.0: USB hub found
  230. [ 1.505182] hub 2-0:1.0: 1 port detected
  231. [ 1.509336] xhci-hcd f2510000.usb3: xHCI Host Controller
  232. [ 1.514685] xhci-hcd f2510000.usb3: new USB bus registered, assigned bus number 3
  233. [ 1.522439] xhci-hcd f2510000.usb3: hcc params 0x0a000990 hci version 0x100 quirks 0x00010010
  234. [ 1.531024] xhci-hcd f2510000.usb3: irq 47, io mem 0xf2510000
  235. [ 1.537004] hub 3-0:1.0: USB hub found
  236. [ 1.540784] hub 3-0:1.0: 1 port detected
  237. [ 1.544817] xhci-hcd f2510000.usb3: xHCI Host Controller
  238. [ 1.550160] xhci-hcd f2510000.usb3: new USB bus registered, assigned bus number 4
  239. [ 1.551628] ata1: SATA link down (SStatus 0 SControl 300)
  240. [ 1.557698] usb usb4: We don't know the algorithms for LPM for this host, disabling LPM.
  241. [ 1.571381] hub 4-0:1.0: USB hub found
  242. [ 1.575162] hub 4-0:1.0: 1 port detected
  243. [ 1.579527] usbcore: registered new interface driver usb-storage
  244. [ 1.586667] rtc-efi rtc-efi: rtc core: registered rtc-efi as rtc0
  245. [ 1.592656] ata4: SATA link down (SStatus 0 SControl 300)
  246. [ 1.593025] i2c /dev entries driver
  247. [ 1.598241] ata3: SATA link down (SStatus 0 SControl 300)
  248. [ 1.607263] i2c i2c-1: Added multiplexed i2c bus 3
  249. [ 1.612155] i2c i2c-1: Added multiplexed i2c bus 4
  250. [ 1.617034] i2c i2c-1: Added multiplexed i2c bus 5
  251. [ 1.621908] i2c i2c-1: Added multiplexed i2c bus 6
  252. [ 1.626779] i2c i2c-1: Added multiplexed i2c bus 7
  253. [ 1.631660] i2c i2c-1: Added multiplexed i2c bus 8
  254. [ 1.636532] i2c i2c-1: Added multiplexed i2c bus 9
  255. [ 1.641404] i2c i2c-1: Added multiplexed i2c bus 10
  256. [ 1.646310] pca954x 1-0070: registered 8 multiplexed busses for I2C switch pca9548
  257. [ 1.654812] sdhci: Secure Digital Host Controller Interface driver
  258. [ 1.661028] sdhci: Copyright(c) Pierre Ossman
  259. [ 1.665490] Synopsys Designware Multimedia Card Interface Driver
  260. [ 1.671858] sdhci-pltfm: SDHCI platform and OF driver helper
  261. [ 1.678232] mmc0: Switching to 3.3V signalling voltage failed
  262. [ 1.709130] mmc0: SDHCI controller on f06e0000.sdhci [f06e0000.sdhci] using ADMA 64-bit
  263. [ 1.726543] ata2: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
  264. [ 1.733721] ata2.00: ATA-8: WDC WD3200BEKX-75B7WT0, 01.01A01, max UDMA/133
  265. [ 1.740635] ata2.00: 625142448 sectors, multi 0: LBA48 NCQ (depth 31/32)
  266. [ 1.748385] ata2.00: configured for UDMA/133
  267. [ 1.751526] mmc0: new high speed MMC card at address 0001
  268. [ 1.752824] scsi 1:0:0:0: Direct-Access ATA WDC WD3200BEKX-7 1A01 PQ: 0 ANSI: 5
  269. [ 1.758111] mmc1: SDHCI controller on f2780000.sdhci [f2780000.sdhci] using ADMA 64-bit
  270. [ 1.758439] mmcblk0: mmc0:0001 8GME4R 7.28 GiB
  271. [ 1.758733] mmcblk0boot0: mmc0:0001 8GME4R partition 1 4.00 MiB
  272. [ 1.759013] mmcblk0boot1: mmc0:0001 8GME4R partition 2 4.00 MiB
  273. [ 1.759091] mmcblk0rpmb: mmc0:0001 8GME4R partition 3 512 KiB, chardev (240:0)
  274. [ 1.763767] mmcblk0: p1 p2
  275. [ 1.766583] sd 1:0:0:0: [sda] 625142448 512-byte logical blocks: (320 GB/298 GiB)
  276. [ 1.808388] sd 1:0:0:0: [sda] Write Protect is off
  277. [ 1.808391] ledtrig-cpu: registered to indicate activity on CPUs
  278. [ 1.819276] sd 1:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
  279. [ 1.819678] usbcore: registered new interface driver usbhid
  280. [ 1.822553] usb 1-1: new high-speed USB device number 2 using xhci-hcd
  281. [ 1.840535] usbhid: USB HID core driver
  282. [ 1.845252] NET: Registered protocol family 17
  283. [ 1.849759] 9pnet: Installing 9P2000 support
  284. [ 1.854073] Key type dns_resolver registered
  285. [ 1.858577] registered taskstats version 1
  286. [ 1.861326] mmc1: new high speed SDHC card at address aaaa
  287. [ 1.862695] Loading compiled-in X.509 certificates
  288. [ 1.873101] hw perfevents: enabled with armv8_cortex_a72 PMU driver, 7 counters available
  289. [ 1.873379] mmcblk1: mmc1:aaaa SL08G 7.40 GiB
  290. [ 1.881584] PCI: OF: host bridge /cp0/pcie@f2600000 ranges:
  291. [ 1.882539] usb 3-1: new high-speed USB device number 2 using xhci-hcd
  292. [ 1.882557] xhci-hcd f2510000.usb3: ERROR: unexpected setup context command completion code 0x11.
  293. [ 1.882560] usb 3-1: hub failed to enable device, error -22
  294. [ 1.886761] mmcblk1: p1 p2
  295. [ 1.891415] PCI: OF: IO 0xf9000000..0xf900ffff -> 0xf9000000
  296. [ 1.921234] PCI: OF: MEM 0xc0000000..0xdfffffff -> 0xc0000000
  297. [ 1.927456] armada8k-pcie f2600000.pcie: link up
  298. [ 1.932142] armada8k-pcie f2600000.pcie: PCI host bridge to bus 0000:00
  299. [ 1.938792] pci_bus 0000:00: root bus resource [bus 00-ff]
  300. [ 1.944306] pci_bus 0000:00: root bus resource [io 0x0000-0xffff] (bus address [0xf9000000-0xf900ffff])
  301. [ 1.953832] pci_bus 0000:00: root bus resource [mem 0xc0000000-0xdfffffff]
  302. [ 1.961114] pci 0000:01:00.0: reg 0x18: initial BAR value 0x00000000 invalid
  303. [ 1.978585] pci 0000:00:00.0: BAR 0: assigned [mem 0xc0000000-0xc00fffff 64bit]
  304. [ 1.985938] pci 0000:00:00.0: BAR 14: assigned [mem 0xc0100000-0xc01fffff]
  305. [ 1.992847] pci 0000:00:00.0: BAR 13: assigned [io 0x1000-0x1fff]
  306. [ 1.999060] pci 0000:01:00.0: BAR 1: assigned [mem 0xc0100000-0xc017ffff]
  307. [ 2.005892] pci 0000:01:00.0: BAR 6: assigned [mem 0xc0180000-0xc01bffff pref]
  308. [ 2.013152] pci 0000:01:00.0: BAR 0: assigned [mem 0xc01c0000-0xc01dffff]
  309. [ 2.019983] pci 0000:01:00.0: BAR 3: assigned [mem 0xc01e0000-0xc01e3fff]
  310. [ 2.026816] pci 0000:01:00.0: BAR 2: assigned [io 0x1000-0x101f]
  311. [ 2.032952] pci 0000:00:00.0: PCI bridge to [bus 01]
  312. [ 2.037942] pci 0000:00:00.0: bridge window [io 0x1000-0x1fff]
  313. [ 2.044066] pci 0000:00:00.0: bridge window [mem 0xc0100000-0xc01fffff]
  314. [ 2.051026] pcieport 0000:00:00.0: Signaling PME with IRQ 54
  315. [ 2.056756] pcieport 0000:00:00.0: AER enabled with IRQ 54
  316. [ 2.062429] e1000e 0000:01:00.0: enabling device (0000 -> 0002)
  317. [ 2.068646] e1000e 0000:01:00.0: Interrupt Throttling Rate (ints/sec) set to dynamic conservative mode
  318. [ 2.134948] e1000e 0000:01:00.0 0000:01:00.0 (uninitialized): registered PHC clock
  319. [ 2.144151] sda: sda1 sda2 sda3 sda4 sda5 sda6
  320. [ 2.149170] sd 1:0:0:0: [sda] Attached SCSI removable disk
  321. [ 2.204410] e1000e 0000:01:00.0 eth3: (PCI Express:2.5GT/s:Width x1) 68:05:ca:26:60:d9
  322. [ 2.212369] e1000e 0000:01:00.0 eth3: Intel(R) PRO/1000 Network Connection
  323. [ 2.219290] e1000e 0000:01:00.0 eth3: MAC: 3, PHY: 8, PBA No: E46981-008
  324. [ 2.226440] xhci-hcd f4500000.usb3: xHCI Host Controller
  325. [ 2.231793] xhci-hcd f4500000.usb3: new USB bus registered, assigned bus number 5
  326. [ 2.239567] xhci-hcd f4500000.usb3: hcc params 0x0a000990 hci version 0x100 quirks 0x00010010
  327. [ 2.248154] xhci-hcd f4500000.usb3: irq 48, io mem 0xf4500000
  328. [ 2.254183] hub 5-0:1.0: USB hub found
  329. [ 2.257966] hub 5-0:1.0: 1 port detected
  330. [ 2.261992] xhci-hcd f4500000.usb3: xHCI Host Controller
  331. [ 2.267335] xhci-hcd f4500000.usb3: new USB bus registered, assigned bus number 6
  332. [ 2.274874] usb usb6: We don't know the algorithms for LPM for this host, disabling LPM.
  333. [ 2.283153] hub 6-0:1.0: USB hub found
  334. [ 2.286932] hub 6-0:1.0: 1 port detected
  335. [ 2.291099] rtc-efi rtc-efi: setting system clock to 2018-03-23 10:00:54 UTC (1521799254)
  336. [ 2.301450] ALSA device list:
  337. [ 2.304458] No soundcards found.
  338. [ 2.308055] Waiting for root device /dev/sdc2...
  339. [ 2.914536] usb 3-1: new high-speed USB device number 3 using xhci-hcd
  340. [ 3.067557] usb-storage 3-1:1.0: USB Mass Storage device detected
  341. [ 3.073813] scsi host4: usb-storage 3-1:1.0
  342. [ 4.099309] scsi 4:0:0:0: Direct-Access SanDisk Cruzer Fit 1.00 PQ: 0 ANSI: 6
  343. [ 4.107859] sd 4:0:0:0: [sdb] 15630336 512-byte logical blocks: (8.00 GB/7.45 GiB)
  344. [ 4.116167] sd 4:0:0:0: [sdb] Write Protect is off
  345. [ 4.121240] sd 4:0:0:0: [sdb] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA
  346. [ 4.138391] sd 4:0:0:0: [sdb] Attached SCSI removable disk
  347. [ 4.567419] usb-storage 1-1:1.0: USB Mass Storage device detected
  348. [ 4.573672] scsi host5: usb-storage 1-1:1.0
  349. [ 5.602745] scsi 5:0:0:0: Direct-Access ADATA USB Flash Drive 1.00 PQ: 0 ANSI: 6
  350. [ 5.611210] sd 5:0:0:0: [sdc] 15155200 512-byte logical blocks: (7.76 GB/7.23 GiB)
  351. [ 5.618926] sd 5:0:0:0: [sdc] Write Protect is off
  352. [ 5.623846] sd 5:0:0:0: [sdc] Write cache: disabled, read cache: disabled, doesn't support DPO or FUA
  353. [ 5.634487] sdc: sdc1 sdc2
  354. [ 5.637929] sd 5:0:0:0: [sdc] Attached SCSI removable disk
  355. [ 5.644332] EXT4-fs (sdc2): couldn't mount as ext3 due to feature incompatibilities
  356. [ 5.667812] EXT4-fs (sdc2): mounted filesystem with ordered data mode. Opts: (null)
  357. [ 5.675528] VFS: Mounted root (ext4 filesystem) on device 8:34.
  358. [ 5.689020] devtmpfs: mounted
  359. [ 5.692351] Freeing unused kernel memory: 1152K
  360. [ 5.898050] systemd[1]: systemd 229 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ -LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD -IDN)
  361. [ 5.916369] systemd[1]: Detected architecture arm64.
  362.  
  363. Welcome to Ubuntu 16.04.3 LTS!
  364.  
  365. [ 5.943254] systemd[1]: Set hostname to <localhost.localdomain>.
  366. [ 6.188275] systemd[1]: Listening on Journal Socket.
  367. [ OK ] Listening on Journal Socket.
  368. [ 6.206582] systemd[1]: Reached target Encrypted Volumes.
  369. [ OK ] Reached target Encrypted Volumes.
  370. [ 6.226637] systemd[1]: Started Trigger resolvconf update for networkd DNS.
  371. [ OK ] Started Trigger resolvconf update for networkd DNS.
  372. [ 6.250596] systemd[1]: Listening on Journal Socket (/dev/log).
  373. [ OK ] Listening on Journal Socket (/dev/log).
  374. [ 6.270651] systemd[1]: Listening on Journal Audit Socket.
  375. [ OK ] Listening on Journal Audit Socket.
  376. [ 6.290558] systemd[1]: Reached target Swap.
  377. [ OK ] Reached target Swap.
  378. [ 6.306611] systemd[1]: Listening on /dev/initctl Compatibility Named Pipe.
  379. [ OK ] Listening on /dev/initctl Compatibility Named Pipe.
  380. [ OK ] Listening on Syslog Socket.
  381. [ OK ] Started Dispatch Password Requests to Console Directory Watch.
  382. [ OK ] Created slice System Slice.
  383. Mounting Debug File System...
  384. Mounting POSIX Message Queue File System...
  385. Starting Journal Service...
  386. [ OK ] Created slice system-serial\x2dgetty.slice.
  387. Starting Create Static Device Nodes in /dev...
  388. Starting Set console keymap...
  389. [ OK ] Started Forward Password Requests to Wall Directory Watch.
  390. [ OK ] Reached target Paths.
  391. Starting Nameserver information manager...
  392. [ OK ] Started Read required files in advance.
  393. [ OK ] Reached target Remote File Systems (Pre).
  394. Starting Load Kernel Modules...
  395. Starting Load/Save Random Seed...
  396. [ OK ] Listening on udev Control Socket.
  397. [ OK ] Reached target Remote File Systems.
  398. [ OK ] Listening on udev Kernel Socket.
  399. Starting udev Coldplug all Devices...
  400. [ OK ] Created slice User and Session Slice.
  401. [ OK ] Reached target Slices.
  402. Mounting Huge Pages File System...
  403. [ OK ] Mounted Huge Pages File System.
  404. [ OK ] Mounted POSIX Message Queue File System.
  405. [ OK ] Mounted Debug File System.
  406. [ OK ] Started Journal Service.
  407. [ OK ] Started Create Static Device Nodes in /dev.
  408. [ OK ] Started Set console keymap.
  409. [ OK ] Started Load Kernel Modules.
  410. [ OK ] Started Load/Save Random Seed.
  411. [ OK ] Started Nameserver information manager.
  412. [ OK ] Reached target Network (Pre).
  413. Starting Apply Kernel Variables...
  414. Mounting Configuration File System...
  415. Starting udev Kernel Device Manager...
  416. [ OK ] Reached target Local File Systems (Pre).
  417. [ OK ] Reached target Local File Systems.
  418. Starting Enable support for additional executable binary formats...
  419. Starting Set console font and keymap...
  420. Starting Flush Journal to Persistent Storage...
  421. [ OK ] Mounted Configuration File System.
  422. [ OK ] Started udev Kernel Device Manager.
  423. [ OK ] Started udev Coldplug all Devices.
  424. [ OK ] Started Apply Kernel Variables.
  425. [ OK ] Started Enable support for additional executable binary formats.
  426. [ OK ] Found device /dev/ttyS0.
  427. Starting Raise network interfaces...
  428. Starting LSB: QEMU KVM module loading script...
  429. [ OK ] Started Set console font and keymap.
  430. [ OK ] Started Flush Journal to Persistent Storage.
  431. Starting Create Volatile Files and Directories...
  432. [ OK ] Created slice system-getty.slice.
  433. [ OK ] Started Create Volatile Files and Directories.
  434. [ OK ] Started LSB: QEMU KVM module loading script.
  435. Starting Update UTMP about System Boot/Shutdown...
  436. Starting Network Time Synchronization...
  437. [ OK ] Started Raise network interfaces.
  438. [ OK ] Started Network Time Synchronization.
  439. [ OK ] Started Update UTMP about System Boot/Shutdown.
  440. [ OK ] Reached target System Initialization.
  441. [ OK ] Started Daily Cleanup of Temporary Directories.
  442. [ OK ] Listening on D-Bus System Message Bus Socket.
  443. [ OK ] Reached target Sockets.
  444. [ OK ] Reached target Basic System.
  445. [ OK ] Started Regular background program processing daemon.
  446. Starting LSB: Set the CPU Frequency Scaling governor to "ondemand"...
  447. Starting System Logging Service...
  448. Starting Permit User Sessions...
  449. Starting Login Service...
  450. [ OK ] Started D-Bus System Message Bus.
  451. Starting LSB: Record successful boot for GRUB...
  452. [ OK ] Reached target System Time Synchronized.
  453. [ OK ] Reached target Network.
  454. [ OK ] Reached target Network is Online.
  455. Starting /etc/rc.local Compatibility...
  456. [ OK ] Started Daily apt download activities.
  457. [ OK ] Started Daily apt upgrade and clean activities.
  458. [ OK ] Reached target Timers.
  459. [ OK ] Started System Logging Service.
  460. [ OK ] Started Permit User Sessions.
  461. [ OK ] Started /etc/rc.local Compatibility.
  462. [ OK ] Started LSB: Set the CPU Frequency Scaling governor to "ondemand".
  463. Starting Daily apt download activities...
  464. [ OK ] Started Serial Getty on ttyS0.
  465. [ OK ] Started Getty on tty1.
  466. [ OK ] Reached target Login Prompts.
  467. Starting Set console scheme...
  468. [ OK ] Started Set console scheme.
  469. [ OK ] Started Login Service.
  470. [ OK ] Started LSB: Record successful boot for GRUB.
  471. [ OK ] Reached target Multi-User System.
  472. [ OK ] Reached target Graphical Interface.
  473. [ OK ] Started Stop ureadahead data collection 45s after completed startup.
  474. Starting Update UTMP about System Runlevel Changes...
  475. [ OK ] Started Update UTMP about System Runlevel Changes.
  476. [ OK ] Started Daily apt download activities.
  477. Starting Daily apt upgrade and clean activities...
  478. [ OK ] Started Daily apt upgrade and clean activities.
  479.  
  480. Ubuntu 16.04.3 LTS localhost.localdomain ttyS0
  481.  
  482. localhost login: root
  483. Last login: Thu Mar 22 16:07:51 UTC 2018 on ttyS0
  484. Welcome to Ubuntu 16.04.3 LTS (GNU/Linux 4.16.0-rc4-14984-gd7ee85b-dirty aarch64)
  485.  
  486. * Documentation: https://help.ubuntu.com
  487. * Management: https://landscape.canonical.com
  488. * Support: https://ubuntu.com/advantage
  489. root@localhost:~#
Add Comment
Please, Sign In to add comment
Public Pastes
We use cookies for various purposes including analytics. By continuing to use Pastebin, you agree to our use of cookies as described in the Cookies Policy.  OK, I Understand
Not a member of Pastebin yet?
Sign Up, it unlocks many cool features!