Alfa AP120C-AP hard reset after loading initramfs

resetting ...

Format: Log Type - Time(microsec) - Message - Optional Info
Log Type: B - Since Boot(Power On Reset),  D - Delta,  S - Statistic
S - QC_IMAGE_VERSION_STRING=BOOT.BF.3.1.1-00117
S - IMAGE_VARIANT_STRING=DAABANAZA
S - OEM_IMAGE_VERSION_STRING=CRM
S - Boot Config, 0x00000020
S - Reset status Config, 0x00000010
S - Core 0 Frequency, 0 MHz
B -       261 - PBL, Start
B -      1338 - bootable_media_detect_entry, Start
B -      1678 - bootable_media_detect_success, Start
B -      1692 - elf_loader_entry, Start
B -      5071 - auth_hash_seg_entry, Start
B -      7217 - auth_hash_seg_exit, Start
B -    579438 - elf_segs_hash_verify_entry, Start
B -    697702 - PBL, End
B -    697726 - SBL1, Start
B -    788462 - pm_device_init, Start
D -         7 - pm_device_init, Delta
B -    789989 - boot_flash_init, Start
D -     54246 - boot_flash_init, Delta
B -    848379 - boot_config_data_table_init, Start
D -      3840 - boot_config_data_table_init, Delta - (419 Bytes)
B -    855858 - clock_init, Start
D -      7573 - clock_init, Delta
B -    867610 - CDT version:2,Platform ID:9,Major ID:0,Minor ID:0,Subtype:16
B -    871137 - sbl1_ddr_set_params, Start
B -    876127 - cpr_init, Start
D -         2 - cpr_init, Delta
B -    880566 - Pre_DDR_clock_init, Start
D -         5 - Pre_DDR_clock_init, Delta
D -     13233 - sbl1_ddr_set_params, Delta
B -    894301 - pm_driver_init, Start
D -         2 - pm_driver_init, Delta
B -    964345 - sbl1_wait_for_ddr_training, Start
D -        28 - sbl1_wait_for_ddr_training, Delta
B -    979883 - Image Load, Start
D -    140779 - QSEE Image Loaded, Delta - (274048 Bytes)
B -   1121088 - Image Load, Start
D -      1439 - SEC Image Loaded, Delta - (2048 Bytes)
B -   1131469 - Image Load, Start
D -    217067 - APPSBL Image Loaded, Delta - (444151 Bytes)
B -   1348931 - QSEE Execution, Start
D -        60 - QSEE Execution, Delta
B -   1355174 - SBL1, End
D -    659526 - SBL1, Delta
S - Flash Throughput, 2006 KB/s  (720666 Bytes,  359106 us)
S - DDR Frequency, 537 MHz


U-Boot 2012.07 [ALFA Network Inc. SmartBS v2.0dk,r2767] (Nov 30 2020 - 17:28:54)

smem ram ptable found: ver: 1 len: 3
       DRAM: 256 MiB
       NAND: spi_nand SF NAND ID 00:c2:12:c2
      FLASH: 144 MiB
     machid: 9000010
  FlashType: 0
       eth0: 00:c0:ca:a5:f7:c3
       eth1: 00:c0:ca:a5:f7:c4
      wifi0: 00:c0:ca:a5:f7:c5
      wifi1: 00:c0:ca:a5:f7:c6
         bt: ff:ff:ff:ff:ff:ff

        Net:
MAC0 addr:00:C0:CA:A5:F7:C3
PHY ID1: 0x4d
PHY ID2: 0xd0b1
eth0
Hit any key to stop booting:  0
Creating 1 MTD partitions on "nand1":
0x000004000000-0x000008000000 : "mtd=1"
UBI: attaching mtd2 to ubi0
UBI: physical eraseblock size:   131072 bytes (128 KiB)
UBI: logical eraseblock size:    126976 bytes
UBI: smallest flash I/O unit:    2048
UBI: VID header offset:          2048 (aligned 2048)
UBI: data offset:                4096
UBI error: ubi_read_volume_table: the layout volume was not found
UBI error: ubi_init: cannot attach mtd2
UBI error: ubi_init: UBI error: cannot initialize UBI, error -22
UBI init error 22

Not found valid kernel, switch to secondary part

Creating 1 MTD partitions on "nand1":
0x000000000000-0x000004000000 : "mtd=0"
UBI: attaching mtd2 to ubi0
UBI: physical eraseblock size:   131072 bytes (128 KiB)
UBI: logical eraseblock size:    126976 bytes
UBI: smallest flash I/O unit:    2048
UBI: VID header offset:          2048 (aligned 2048)
UBI: data offset:                4096
UBI error: ubi_read_volume_table: the layout volume was not found
UBI error: ubi_init: cannot attach mtd2
UBI error: ubi_init: UBI error: cannot initialize UBI, error -22
UBI init error 22
Try to boot both bootpart fail.
resetting ...