Advertisement
Not a member of Pastebin yet?
Sign Up,
it unlocks many cool features!
- ╰─ lsblk -f
- NAME FSTYPE FSVER LABEL UUID FSAVAIL FSUSE% MOUNTPOINTS
- sda
- ├─sda1 vfat FAT32 738B-2639 299,1M 0% /boot/efi
- ├─sda2 ext4 1.0 4655e51b-56c9-4a20-845c-15b2501093d1 1,8G 94% /
- └─sda3 swap 1 swap 5827301c-0a9b-476d-817c-ddd30f10f291 [SWAP]
- sdb
- └─sdb1 exfat 1.0 ExtremePro EA9D-D492 172,6G 81% /run/media/souto/ExtremePro
- sdc
- └─sdc1 ext4 1.0 SD512400MPBS 0ba98024-6839-4aba-8ddc-2a5c0cd9fbf8 417,7G 4% /run/media/souto/SD512400MPBS
- sdd
- └─sdd1 ext4 1.0 SD1TB400MBPS 5e736f29-3def-436a-844d-fe72b8a8c727 843,5G 3% /run/media/souto/SD1TB400MBPS
- sde
- sdh
- └─sdh1 ext4 1.0 257-FLASH 0f71ac47-3599-4fcc-8155-c04782af40df 175G 20% /run/media/souto/257-FLASH
- sdi
- └─sdi1 ntfs Iomega_Ext_Drive 5A2C00E72C00C04D
- sr0
- sr1 iso9660 Joliet Extension Virtual CD 2011-03-07-16-42-52-00 0 100% /run/media/souto/Virtual CD
- ╰─ sudo fdisk -l /dev/sdi
- Disk /dev/sdi: 1,82 TiB, 1999664930816 bytes, 488199446 sectors
- Disk model: Ext Hard Disk
- Units: sectors of 1 * 4096 = 4096 bytes
- Sector size (logical/physical): 4096 bytes / 4096 bytes
- I/O size (minimum/optimal): 4096 bytes / 4096 bytes
- Disklabel type: dos
- Disk identifier: 0x76f29dcc
- Device Boot Start End Sectors Size Id Type
- /dev/sdi1 256 488199167 488198912 1,8T 7 HPFS/NTFS/exFAT
- ╰─ inxi -SDxxxc0
- System:
- Host: eos Kernel: 6.6.47-1-lts arch: x86_64 bits: 64 compiler: gcc v: 14.2.1
- clocksource: tsc
- Desktop: Xfce v: 4.18.1 tk: Gtk v: 3.24.43 wm: xfwm4 v: 4.18.0
- with: xfce4-panel tools: xfce4-screensaver vt: 7 dm: LightDM v: 1.32.0
- Distro: EndeavourOS base: Arch Linux
- Drives:
- Local Storage: total: 4.56 TiB used: 1.04 TiB (22.8%)
- ID-1: /dev/sda vendor: SanDisk model: SD9TB8W256G1001 size: 238.47 GiB
- speed: 6.0 Gb/s tech: SSD serial: 190339802014 fw-rev: 7101 scheme: GPT
- ID-2: /dev/sdb vendor: SanDisk model: Extreme Pro 55AF size: 931.48 GiB
- type: USB rev: 3.2 spd: 5 Gb/s lanes: 1 tech: N/A
- serial: 32323338454E343034383536 fw-rev: 1085 scheme: GPT
- ID-3: /dev/sdc vendor: SanDisk model: SanDisk 3.2 Gen1 size: 466.27 GiB
- type: USB rev: 3.2 spd: 5 Gb/s lanes: 1 tech: N/A serial: A20045EF03061F16
- fw-rev: DL17 scheme: MBR
- ID-4: /dev/sdd vendor: SanDisk model: SanDisk 3.2 Gen1 size: 931.88 GiB
- type: USB rev: 3.2 spd: 5 Gb/s lanes: 1 tech: N/A serial: A2003A8A03F17537
- fw-rev: DL17 scheme: MBR
- ID-5: /dev/sdh vendor: Samsung model: Flash Drive FIT size: 239.02 GiB
- type: USB rev: 3.1 spd: 5 Gb/s lanes: 1 tech: SSD serial: 0362021020035673
- fw-rev: 1100 scheme: GPT
- ID-6: /dev/sdi vendor: Samsung model: HD204UI size: 1.82 TiB type: USB
- rev: 3.0 spd: 5 Gb/s lanes: 1 tech: HDD rpm: 5400 serial: S2H7J90B107907
- fw-rev: 0000 scheme: MBR
- ╰─ sudo inxi --admin --verbosity=7 --filter --no-host --width
- (...)
- ID-6: /dev/sdi maj-min: 8:128 vendor: Samsung model: HD204UI
- family: SpinPoint F4 EG (AF) size: 1.82 TiB block-size: physical: 512 B
- logical: 512 B type: USB rev: 3.0 spd: 5 Gb/s lanes: 1 mode: 3.2 gen-1x1
- sata: 2.6 speed: 3.0 Gb/s tech: HDD rpm: 5400 serial: <filter> fw-rev: 0000
- drive-rev: 1AQ10001 temp: 27 C scheme: MBR
- (...)
- ╰─ smartctl 7.4 2023-08-01 r5530 [x86_64-linux-6.6.47-1-lts] (local build)
- Copyright (C) 2002-23, Bruce Allen, Christian Franke, www.smartmontools.org
- === START OF INFORMATION SECTION ===
- Model Family: SAMSUNG SpinPoint F4 EG (AF)
- Device Model: SAMSUNG HD204UI
- Serial Number: S2H7J90B107907
- LU WWN Device Id: 5 0024e9 20448a941
- Firmware Version: 1AQ10001
- User Capacity: 2.000.398.934.016 bytes [2,00 TB]
- Sector Size: 512 bytes logical/physical
- Rotation Rate: 5400 rpm
- Form Factor: 3.5 inches
- Device is: In smartctl database 7.3/5528
- ATA Version is: ATA8-ACS T13/1699-D revision 6
- SATA Version is: SATA 2.6, 3.0 Gb/s
- Local Time is: Mon Sep 9 21:07:37 2024 CEST
- ==> WARNING: Using smartmontools or hdparm with this
- drive may result in data loss due to a firmware bug.
- ****** THIS DRIVE MAY OR MAY NOT BE AFFECTED! ******
- Buggy and fixed firmware report same version number!
- See the following web pages for details:
- http://knowledge.seagate.com/articles/en_US/FAQ/223571en
- https://www.smartmontools.org/wiki/SamsungF4EGBadBlocks
- SMART support is: Available - device has SMART capability.
- SMART support is: Enabled
- === START OF READ SMART DATA SECTION ===
- SMART overall-health self-assessment test result: PASSED
- General SMART Values:
- Offline data collection status: (0x00) Offline data collection activity
- was never started.
- Auto Offline Data Collection: Disabled.
- Self-test execution status: ( 0) The previous self-test routine completed
- without error or no self-test has ever
- been run.
- Total time to complete Offline
- data collection: (19980) seconds.
- Offline data collection
- capabilities: (0x5b) SMART execute Offline immediate.
- Auto Offline data collection on/off support.
- Suspend Offline collection upon new
- command.
- Offline surface scan supported.
- Self-test supported.
- No Conveyance Self-test supported.
- Selective Self-test supported.
- SMART capabilities: (0x0003) Saves SMART data before entering
- power-saving mode.
- Supports SMART auto save timer.
- Error logging capability: (0x01) Error logging supported.
- General Purpose Logging supported.
- Short self-test routine
- recommended polling time: ( 2) minutes.
- Extended self-test routine
- recommended polling time: ( 333) minutes.
- SCT capabilities: (0x003f) SCT Status supported.
- SCT Error Recovery Control supported.
- SCT Feature Control supported.
- SCT Data Table supported.
- SMART Attributes Data Structure revision number: 16
- Vendor Specific SMART Attributes with Thresholds:
- ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE
- 1 Raw_Read_Error_Rate 0x002f 100 100 051 Pre-fail Always - 0
- 2 Throughput_Performance 0x0026 252 252 000 Old_age Always - 0
- 3 Spin_Up_Time 0x0023 066 065 025 Pre-fail Always - 10383
- 4 Start_Stop_Count 0x0032 093 093 000 Old_age Always - 7584
- 5 Reallocated_Sector_Ct 0x0033 252 252 010 Pre-fail Always - 0
- 7 Seek_Error_Rate 0x002e 252 252 051 Old_age Always - 0
- 8 Seek_Time_Performance 0x0024 252 252 015 Old_age Offline - 0
- 9 Power_On_Hours 0x0032 100 100 000 Old_age Always - 5999
- 10 Spin_Retry_Count 0x0032 252 252 051 Old_age Always - 0
- 11 Calibration_Retry_Count 0x0032 252 252 000 Old_age Always - 0
- 12 Power_Cycle_Count 0x0032 100 100 000 Old_age Always - 496
- 181 Program_Fail_Cnt_Total 0x0022 100 100 000 Old_age Always - 3
- 191 G-Sense_Error_Rate 0x0022 100 100 000 Old_age Always - 43
- 192 Power-Off_Retract_Count 0x0022 252 252 000 Old_age Always - 0
- 194 Temperature_Celsius 0x0002 064 055 000 Old_age Always - 31 (Min/Max 11/45)
- 195 Hardware_ECC_Recovered 0x003a 100 100 000 Old_age Always - 0
- 196 Reallocated_Event_Count 0x0032 252 252 000 Old_age Always - 0
- 197 Current_Pending_Sector 0x0032 252 252 000 Old_age Always - 0
- 198 Offline_Uncorrectable 0x0030 252 252 000 Old_age Offline - 0
- 199 UDMA_CRC_Error_Count 0x0036 200 200 000 Old_age Always - 0
- 200 Multi_Zone_Error_Rate 0x002a 100 100 000 Old_age Always - 3
- 223 Load_Retry_Count 0x0032 252 252 000 Old_age Always - 0
- 225 Load_Cycle_Count 0x0032 100 100 000 Old_age Always - 7593
- SMART Error Log Version: 1
- No Errors Logged
- SMART Self-test log structure revision number 1
- Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error
- # 1 Short offline Completed without error 00% 5999 -
- # 2 Short offline Completed without error 00% 5999 -
- SMART Selective self-test log data structure revision number 0
- Note: revision number not 1 implies that no selective self-test has ever been run
- SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
- 1 0 0 Completed [00% left] (0-65535)
- 2 0 0 Not_testing
- 3 0 0 Not_testing
- 4 0 0 Not_testing
- 5 0 0 Not_testing
- Selective self-test flags (0x0):
- After scanning selected spans, do NOT read-scan remainder of disk.
- If Selective self-test is pending on power-up, resume after 0 minute delay.
- The above only provides legacy SMART information - try 'smartctl -x' for more
- ╰─ sudo ntfsfix --clear-dirty /dev/sdi
- Mounting volume... NTFS signature is missing.
- FAILED
- Attempting to correct errors... NTFS signature is missing.
- FAILED
- Failed to startup volume: Invalid argument
- NTFS signature is missing.
- Trying the alternate boot sector
- Unrecoverable error
- Volume is corrupt. You should run chkdsk.
Advertisement
Add Comment
Please, Sign In to add comment
Advertisement