Advertisement
Not a member of Pastebin yet?
Sign Up,
it unlocks many cool features!
- Welcome to EdgeSwitch
- By logging in, accessing, or using the Ubiquiti product, you
- acknowledge that you have read and understood the Ubiquiti
- License Agreement (available in the Web UI at, by default,
- http://192.168.1.2) and agree to be bound by its terms.
- User:ubnt
- Password:************
- (ES16-MDF1-Data1) >en
- Password:************
- (ES16-MDF1-Data1) #show running-config
- !Current Configuration:
- !
- !System Description "EdgeSwitch 16-Port 10G, 1.7.1alpha1.4957684, Linux 3.6.5, 1 .0.0.4872137"
- !System Software Version "1.7.1alpha1.4957684"
- !System Up Time "0 days 0 hrs 4 mins 25 secs"
- !Additional Packages QOS,IPv6 Management,Stacking,Routing
- !Current SNTP Synchronized Time: SNTP Last Attempt Status Is Not Successful
- !
- hostname "ES16-MDF1-Data1"
- network protocol none
- network parms 192.168.201.2 255.255.255.0 192.168.201.1
- vlan database
- vlan 2-7
- vlan name 2 "Data"
- vlan name 3 "Camera"
- vlan name 4 "Hand-Scaner"
- vlan name 5 "Voice"
- vlan name 6 "EXEC"
- vlan name 7 "Public"
- exit
- ip http session soft-timeout 60
- ip ssh server enable
- sshcon timeout 160
- no ip telnet server enable
- configure
- stack
- member 1 3
- member 2 3
- exit
- slot 1/0 3
- set slot power 1/0
- no set slot disable 1/0
- slot 2/0 3
- set slot power 2/0
- no set slot disable 2/0
- username "ubnt" password
- line console
- exit
- line telnet
- exit
- line ssh
- exit
- spanning-tree mst priority 0 0
- spanning-tree mst instance 1
- spanning-tree mst priority 1 0
- spanning-tree mst vlan 1 1-7
- snmp-server sysname "ES16-MDF1-Data1"
- !
- snmp-server community "XxXxXxXx" ro
- interface lag 1
- switchport mode trunk
- exit
- interface lag 2
- switchport mode trunk
- exit
- interface lag 3
- switchport mode trunk
- exit
- interface lag 4
- switchport mode trunk
- exit
- interface lag 5
- switchport mode trunk
- exit
- interface lag 6
- switchport mode trunk
- exit
- exit
- (ES16-MDF1-Data1) #show stack-?
- stack-port stack-status
- (ES16-MDF1-Data1) #show stack-port ?
- <cr> Press enter to execute the command.
- | Output filter options.
- counters Display stack-port counter information.
- diag Display stack-port diagnostic information.
- stack-path Display stack-path information.
- (ES16-MDF1-Data1) #show stack-port
- Configured Running
- Stack Stack Link Link
- Unit Interface Mode Mode Status Speed (Gb/s)
- ---- ---------------- ---------- ---------- ------------ ------------
- 1 0/11 Stack Stack Link Up 10
- 1 0/12 Stack Stack Link Up 10
- 2 0/11 Stack Stack Link Up 10
- 2 0/12 Stack Stack Link Up 10
- (ES16-MDF1-Data1) #show stack-port counters
- ------------TX-------------- ------------RX-------------- ------
- Data Error Data Error
- Rate Rate Total Rate Rate Total Link
- Unit Interface (Mb/s) (Errors/s) Errors (Mb/s) (Errors/s) Errors Flaps
- ---- ---------------- ------ ---------- ---------- ------ ---------- ---------- ------
- 1 0/11 0 0 0 0 0 0 1
- 1 0/12 0 0 0 0 0 0 1
- (ES16-MDF1-Data1) #show stack-port diag ?
- <cr> Press enter to execute the command.
- | Output filter options.
- <1-4> Enter unit number.
- all Stack counters from all the units of the stack.
- (ES16-MDF1-Data1) #show stack-port diag all
- 1 - 0/11:
- RBYT:4b936 RPKT:1de TBYT:7025b TPKT:810
- RFCS:0 RFRG:0 RJBR:0 RUND:0 RUNT:0
- TFCS:0 TERR:0
- 1 - 0/12:
- RBYT:124113 RPKT:924 TBYT:168061 TPKT:adc
- RFCS:0 RFRG:0 RJBR:0 RUND:0 RUNT:0
- TFCS:0 TERR:0
- 2 - 0/11:
- RBYT:1678bd RPKT:ada TBYT:1259c3 TPKT:925
- RFCS:0 RFRG:0 RJBR:0 RUND:0 RUNT:0
- TFCS:0 TERR:0
- 2 - 0/12:
- RBYT:6fa63 RPKT:80d TBYT:4bbde TPKT:1df
- RFCS:0 RFRG:0 RJBR:0 RUND:0 RUNT:0
- TFCS:0 TERR:0
- (ES16-MDF1-Data1) #show stack-port ?
- <cr> Press enter to execute the command.
- | Output filter options.
- counters Display stack-port counter information.
- diag Display stack-port diagnostic information.
- stack-path Display stack-path information.
- (ES16-MDF1-Data1) #show stack-port stack-path ?
- <1-4> Enter source unit number.
- all Stack-path from all the units of the stack.
- (ES16-MDF1-Data1) #show stack-port stack-path all ?
- <1-4> Enter destination unit number.
- (ES16-MDF1-Data1) #show stack-port stack-path all
- Command not found / Incomplete command. Use ? to list commands.
- (ES16-MDF1-Data1) #show stack-port stack-path all 1 ?
- <cr> Press enter to execute the command.
- | Output filter options.
- (ES16-MDF1-Data1) #show stack-port stack-path all 1
- Packet-path from unit 2 to unit 1:
- ----------------------------------
- 1 unit-2 port 2/0/11 to unit-1
- Total hop count: 1
- (ES16-MDF1-Data1) #show stack-port stack-path all 2
- Packet-path from unit 1 to unit 2:
- ----------------------------------
- 1 unit-1 port 1/0/12 to unit-2
- Total hop count: 1
- (ES16-MDF1-Data1) #show stack-port stack-path all 3
- Switch 3 does not exist!
- (ES16-MDF1-Data1) #show stack-port ?
- <cr> Press enter to execute the command.
- | Output filter options.
- counters Display stack-port counter information.
- diag Display stack-port diagnostic information.
- stack-path Display stack-path information.
- (ES16-MDF1-Data1) #show stack-?
- stack-port stack-status
- (ES16-MDF1-Data1) #show stack-status ?
- <cr> Press enter to execute the command.
- | Output filter options.
- <1-4> Enter unit number.
- all Stack status information from all the units of the
- stack.
- (ES16-MDF1-Data1) #show stack-status all ?
- <cr> Press enter to execute the command.
- | Output filter options.
- clear Clear stack status information.
- (ES16-MDF1-Data1) #show stack-status all
- Stack Unit 1 Status
- Sampling Mode: Cumulative Summing
- --------------------------------------
- Unit Current Average Min Max Dropped
- --------------------------------------
- 2 2000 2000 1996 2004 0
- Stack Unit 2 Status
- Sampling Mode: Cumulative Summing
- --------------------------------------
- Unit Current Average Min Max Dropped
- --------------------------------------
- 1 1000 1000 991 1008 0
- (ES16-MDF1-Data1) #
- (ES16-MDF1-Data1) #show ip?
- ip ipv6
- (ES16-MDF1-Data1) #show ip
- Command not found / Incomplete command. Use ? to list commands.
- (ES16-MDF1-Data1) #show ip ?
- access-lists Display IP access list information.
- address-conflict Display IP address conflict information.
- brief Display IP summary information.
- dhcp Display DHCP server configuration and statistics.
- helper Display IP helper statistics.
- helper-address Display Helper IP's List information.
- http Display HTTP information.
- interface Display IP interface information.
- irdp Display router discovery information.
- prefix-list Display router prefix-list information
- protocols Show IP routing protocols information.
- route Display routing table information.
- ssh Display IP secure shell (SSH) information.
- stats Display IP statistical information.
- vlan Display IP VLAN Routing information.
- (ES16-MDF1-Data1) #show ip brief ?
- <cr> Press enter to execute the command.
- | Output filter options.
- (ES16-MDF1-Data1) #show ip brief
- Default Time to Live........................... 64
- Routing Mode................................... Disabled
- Maximum Next Hops.............................. 1
- Maximum Routes................................. 16
- Maximum Static Routes.......................... 16
- ICMP Rate Limit Interval....................... 1000 msec
- ICMP Rate Limit Burst Size..................... 100 messages
- ICMP Echo Replies.............................. Enabled
- ICMP Redirects................................. Enabled
- (ES16-MDF1-Data1) (Config)#stack ?
- <cr> Press enter to execute the command.
- (ES16-MDF1-Data1) (Config)#stack
- (ES16-MDF1-Data1) (Config-stack)#?
- do Run Privileged Exec mode commands.
- exit To exit from the mode.
- member Create a stack member.
- movemanagement Move stack management functionality to a different
- switch.
- show Display Switch Options and Settings.
- stack-port Configure a stack-port on an interface.
- stack-status Configure stack-status collection mode.
- standby Assign a Standby.
- (ES16-MDF1-Data1) (Config-stack)#stack-?
- stack-port stack-status
- (ES16-MDF1-Data1) (Config-stack)#stack-port ?
- <unit/slot/port> Enter interface in unit/slot/port format.
- (ES16-MDF1-Data1) (Config-stack)#stack ?
- % Unrecognized command
- (ES16-MDF1-Data1) (Config-stack)#?
- do Run Privileged Exec mode commands.
- exit To exit from the mode.
- member Create a stack member.
- movemanagement Move stack management functionality to a different
- switch.
- show Display Switch Options and Settings.
- stack-port Configure a stack-port on an interface.
- stack-status Configure stack-status collection mode.
- standby Assign a Standby.
- (ES16-MDF1-Data1) (Config-stack)#show ?
- aaa Display IAS users.
- access-lists Display access list information.
- accounting Display ordered methods for accounting lists
- arp Display Address Resolution Protocol cache.
- authentication Display ordered methods for authentication lists
- authorization Display ordered methods for authorization lists.
- auto-copy-sw Display auto copy code configuration information.
- auto-voip Display Auto VoIP parameters.
- autoinstall Display the current status of the AutoInstall process.
- backup-config Display the backup-config.
- bootvar Shows the boot images on the node.
- capture Show RPCAP options.
- class-map Display DiffServ class information.
- classofservice Display class of service information.
- clibanner Display banner configuration.
- clock Display the time and date from the system clock.
- dampening Display dampening information.
- debugging Display debugging configuration.
- dhcp Display DHCP parameters.
- diffserv Display DiffServ information.
- domain-name Display the current status of the AutoInstall process.
- dos-control Display Denial of Service Configuration.
- dot1x Display dot1x information.
- environment Display vital environment status data.
- eventlog Display event log entries.
- exception Display coredump configuration.
- factory-defaults Display factory defaults.
- fiber-ports Fiber Ports.
- flowcontrol Enable/Disable 802.3x flow control.
- forwardingdb Display Forwarding Database aging time.
- garp Display Generic Attribute Registration Protocol
- information.
- gmrp Display GMRP interface information.
- gvrp Display GARP VLAN Registration Protocol parameters.
- hardware Display vital product data.
- hosts To display the default domain name, a list of name
- server hosts, the static and the cached list of host
- names and addresses.
- igmpsnooping Display IGMP Snooping information.
- interface Display IP interface information.
- interfaces Display Interfaces Information.
- ip Display IP information.
- ipv6 Display IPv6 information.
- lacp Display LACP configuration.
- link Display link dependency group configuration.
- lldp Display LLDP configuration.
- logging Display logging parameters.
- loginsession Display login session info.
- mac Display MAC Address-table behavior and entries.
- mac-addr-table Display forwarding database information.
- mac-address-table Display MAC Address Table information.
- mail-server Display mail server config.
- mbuf Display Mbuf information
- monitor Display port monitor settings.
- msg-queue Display Message Queue
- mvr Display MVR configuration and status.
- network Display configuration for inband connectivity.
- passwords Display information about passwords.
- platform Display information of the switch.
- policy-map Display DiffServ policy information.
- port Display Port Mode and settings
- port-channel Display port-channel information.
- port-security Display port-security (port MAC locking) information
- for system.
- process Display process information.
- radius Display RADIUS configuration information.
- reload Display the reload information.
- rmon Display RMON alarms, events, history or statistics.
- route-map Display route-map information
- routing Show routing.
- running-config Display the running config.
- sdm Switch database management
- serial Display EIA-232 parameters and serial port inactivity
- timeout.
- service-policy Display DiffServ service statistical information.
- snmp Display SNMP configuration.
- snmp-server Display SNMP server parameters.
- sntp Display SNTP Information.
- spanning-tree Display spanning tree information.
- stack-port Display stack-port information.
- stack-status Display stack status information.
- startup-config Display the startup-config.
- stats Display the time range based statistics collection.
- storm-control Display Storm-Control information.
- switch Display stack or switch information.
- switchport Display Switchport Mode.
- sysinfo Display system information including system up time.
- tacacs Display TACACS+ configuration.
- tech-support Display switch information needed for
- trouble-shooting.
- telnetcon Display Telnet configuration information.
- terminal Display terminal line information.
- time-range Display time-range information.
- trapflags Display the value of trap flags that apply to the
- switch.
- users Display Users and User Accounts information.
- version Display switch description and hardware information.
- vlan Display VLAN configuration and configure VLANs.
- voice Display the voice VLAN configuration.
- (ES16-MDF1-Data1) (Config-stack)#show stack-?
- stack-port stack-status
- (ES16-MDF1-Data1) (Config-stack)#show stack-port ?
- <cr> Press enter to execute the command.
- | Output filter options.
- counters Display stack-port counter information.
- diag Display stack-port diagnostic information.
- stack-path Display stack-path information.
- (ES16-MDF1-Data1) (Config-stack)#show stack-port
- Configured Running
- Stack Stack Link Link
- Unit Interface Mode Mode Status Speed (Gb/s)
- ---- ---------------- ---------- ---------- ------------ ------------
- 1 0/11 Stack Stack Link Up 10
- 1 0/12 Stack Stack Link Up 10
- 2 0/11 Stack Stack Link Up 10
- 2 0/12 Stack Stack Link Up 10
- (ES16-MDF1-Data1) (Config-stack)#stack-status ?
- sample-mode Sample collection mode.
- (ES16-MDF1-Data1) (Config-stack)#stack-status sample-mode ?
- cumulative Cumulative summing mode of sampling.
- history History mode of sampling.
- (ES16-MDF1-Data1) (Config-stack)#standby ?
- <unit> Enter switch ID in the range of 1 to 4.
- (ES16-MDF1-Data1) (Config-stack)#standby 2
- (ES16-MDF1-Data1) (Config-stack)#movemanagement ?
- <fromunit> Enter switch ID in the range of 1 to 4.
- (ES16-MDF1-Data1) (Config-stack)#movemanagement 1
- Command not found / Incomplete command. Use ? to list commands.
- (ES16-MDF1-Data1) (Config-stack)#movemanagement 1 ?
- <tounit> Enter switch ID in the range of 1 to 4.
- (ES16-MDF1-Data1) (Config-stack)#stack-?
- stack-port stack-status
- (ES16-MDF1-Data1) (Config-stack)#stack-port ?
- <unit/slot/port> Enter interface in unit/slot/port format.
- (ES16-MDF1-Data1) (Config-stack)#stack-port 1/0/16 ?
- ethernet Configure a Front Panel Stacking Port to Ethernet
- Mode.
- stack Configure a Front Panel Stacking Port to Stacking
- Mode.
- (ES16-MDF1-Data1) (Config-stack)#stack-port 1/0/12 ?
- ethernet Configure a Front Panel Stacking Port to Ethernet
- Mode.
- stack Configure a Front Panel Stacking Port to Stacking
- Mode.
- (ES16-MDF1-Data1) (Config-stack)#stack-port 1/0/12 ethernet ?
- <cr> Press enter to execute the command.
- (ES16-MDF1-Data1) (Config-stack)#stack-port 1/0/12 ethernet
- (ES16-MDF1-Data1) (Config-stack)#stack-port 2/0/12 ethernet
- (ES16-MDF1-Data1) (Config-stack)#show stack-?
- stack-port stack-status
- (ES16-MDF1-Data1) (Config-stack)#show stack-port
- Configured Running
- Stack Stack Link Link
- Unit Interface Mode Mode Status Speed (Gb/s)
- ---- ---------------- ---------- ---------- ------------ ------------
- 1 0/11 Stack Stack Link Up 10
- 1 0/12 Ethernet Stack Link Up 10
- 2 0/11 Stack Stack Link Up 10
- 2 0/12 Ethernet Stack Link Up 10
- (ES16-MDF1-Data1) (Config-stack)#stack-port 2/0/12 ethernet ?
- <cr> Press enter to execute the command.
- (ES16-MDF1-Data1) (Config-stack)#stack-port 2/0/16 ?
- ethernet Configure a Front Panel Stacking Port to Ethernet
- Mode.
- stack Configure a Front Panel Stacking Port to Stacking
- Mode.
- (ES16-MDF1-Data1) (Config-stack)#stack-port 2/0/16 stack ?
- <cr> Press enter to execute the command.
- (ES16-MDF1-Data1) (Config-stack)#stack-port 2/0/16 stack
- Couldn't set Front Panel Stacking mode.
- (ES16-MDF1-Data1) (Config-stack)#exit
- (ES16-MDF1-Data1) (Config)#exit
- (ES16-MDF1-Data1) #boot ?
- auto-copy-sw Enable/Disable auto copy of code if there is a
- version mismatch.
- autoinstall Used to enable/disable autoinstall operational mode
- on the switch.
- host Used to enable/disable autoinstall persistent mode on
- the switch.
- system Marks the given image as active for subsequent
- re-boots.
- (ES16-MDF1-Data1) #boot system ?
- <unit> Enter switch ID in the range of 1 to 4.
- active Marks the given image as active for subsequent
- re-boots.
- backup Marks the given image as active for subsequent
- re-boots.
- (ES16-MDF1-Data1) #boot system 2 ?
- active Marks the given image as active for subsequent
- re-boots.
- backup Marks the given image as active for subsequent
- re-boots.
- (ES16-MDF1-Data1) #boot system 2 active ?
- <cr> Press enter to execute the command.
- (ES16-MDF1-Data1) #show bootvar
- ------- -------------------- ----------------------------------------
- Image Version Descriptions
- ------- -------------------- ----------------------------------------
- active *1.7.1alpha1.4957684
- backup 1.7.0.4922892
- Current Active : 1.7.1.4957684
- Next Active : 1.7.1alpha1.4957684
- active *1.7.1.4957684
- backup 1.7.0.4922892
- Current Active : 1.7.1.4957684
- Next Active : 1.7.1.4957684
- (ES16-MDF1-Data1) #show bootvar ?
- <cr> Press enter to execute the command.
- | Output filter options.
- <unit> Unit to be used for this operation. If absent,
- command executes on all nodes.
- (ES16-MDF1-Data1) #show bootvar 1 ?
- <cr> Press enter to execute the command.
- | Output filter options.
- (ES16-MDF1-Data1) #show bootvar 1
- ------- -------------------- ----------------------------------------
- Image Version Descriptions
- ------- -------------------- ----------------------------------------
- active *1.7.1alpha1.4957684
- backup 1.7.0.4922892
- Current Active : 1.7.1.4957684
- Next Active : 1.7.1alpha1.4957684
- (ES16-MDF1-Data1) #show bootvar 2
- ------- -------------------- ----------------------------------------
- Image Version Descriptions
- ------- -------------------- ----------------------------------------
- active *1.7.1.4957684
- backup 1.7.0.4922892
- Current Active : 1.7.1.4957684
- Next Active : 1.7.1.4957684
- (ES16-MDF1-Data1) #boot ?
- auto-copy-sw Enable/Disable auto copy of code if there is a
- version mismatch.
- autoinstall Used to enable/disable autoinstall operational mode
- on the switch.
- host Used to enable/disable autoinstall persistent mode on
- the switch.
- system Marks the given image as active for subsequent
- re-boots.
- (ES16-MDF1-Data1) #boot system ?
- <unit> Enter switch ID in the range of 1 to 4.
- active Marks the given image as active for subsequent
- re-boots.
- backup Marks the given image as active for subsequent
- re-boots.
- (ES16-MDF1-Data1) #boot system 2 ?
- active Marks the given image as active for subsequent
- re-boots.
- backup Marks the given image as active for subsequent
- re-boots.
- (ES16-MDF1-Data1) #boot system 2 backup ?
- <cr> Press enter to execute the command.
- (ES16-MDF1-Data1) #boot system 2 backup
- Activ
- (ES16-MDF1-Data1) #show bootvar
- ------- -------------------- ----------------------------------------
- Image Version Descriptions
- ------- -------------------- ----------------------------------------
- active *1.7.1alpha1.4957684
- backup 1.7.0.4922892
- Current Active : 1.7.1.4957684
- Next Active : 1.7.1alpha1.4957684
- active 1.7.1.4957684
- backup *1.7.0.4922892
- Current Active : 1.7.1.4957684
- Next Active : 1.7.0.4922892
- (ES16-MDF1-Data1) #boot system 1 backup
- Activating image backup ..
- (ES16-MDF1-Data1) #show bootvar
- ------- -------------------- ----------------------------------------
- Image Version Descriptions
- ------- -------------------- ----------------------------------------
- active 1.7.1alpha1.4957684
- backup *1.7.0.4922892
- Current Active : 1.7.1.4957684
- Next Active : 1.7.0.4922892
- active 1.7.1.4957684
- backup *1.7.0.4922892
- Current Active : 1.7.1.4957684
- Next Active : 1.7.0.4922892
Advertisement
Add Comment
Please, Sign In to add comment
Advertisement