API tools faq
paste
Guest User

uConsole UART Output

a guest
Oct 17th, 2024
136
0
Never
Add comment
Not a member of Pastebin yet? Sign Up, it unlocks many cool features!
text 6.61 KB | None | 0 0
raw download clone embed print report
  1. [145]HELLO! BOOT0 is starting!
  2. [148]BOOT0 commit : d21a737
  3. [151]set pll start
  4. [153]periph0 has been enabled
  5. [156]set pll end
  6. [157]board init ok
  7. [159]DRAM only have internal ZQ!!
  8. [162]get_pmu_exist() = -1
  9. [165]ddr_efuse_type: 0x0
  10. [168][AUTO DEBUG] two rank and full DQ!
  11. [171]ddr_efuse_type: 0x0
  12. [175][AUTO DEBUG] rank 0 row = 15
  13. [178][AUTO DEBUG] rank 0 bank = 8
  14. [181][AUTO DEBUG] rank 0 page size = 2 KB
  15. [185][AUTO DEBUG] rank 1 row = 15
  16. [188][AUTO DEBUG] rank 1 bank = 8
  17. [191][AUTO DEBUG] rank 1 page size = 2 KB
  18. [195]rank1 config same as rank0
  19. [198]DRAM BOOT DRIVE INFO: V0.24
  20. [201]DRAM CLK = 792 MHz
  21. [203]DRAM Type = 3 (2:DDR2,3:DDR3)
  22. [206]DRAMC ZQ value: 0x7b7bfb
  23. [209]DRAM ODT value: 0x42.
  24. [211]ddr_efuse_type: 0x0
  25. [214]DRAM SIZE =1024 M
  26. [218]DRAM simple test OK.
  27. [220]dram size =1024
  28. [222]card no is 0
  29. [224]sdcard 0 line count 4
  30. [226][mmc]: mmc driver ver 2021-04-2 16:45
  31. [236][mmc]: Wrong media type 0x0
  32. [239][mmc]: ***Try SD card 0***
  33. [264][mmc]: HSSDR52/SDR25 4 bit
  34. [267][mmc]: 50000000 Hz
  35. [269][mmc]: 15193 MB
  36. [271][mmc]: ***SD/MMC 0 init OK!!!***
  37. [346]Loading boot-pkg Succeed(index=1).
  38. [350]Entry_name = opensbi
  39. [353]Entry_name = dtb
  40. [355]Entry_name = u-boot
  41. [359]Adding DRAM info to DTB.
  42. [364]Jump to second Boot.
  43.  
  44. OpenSBI v1.4
  45. ____ _____ ____ _____
  46. / __ \ / ____| _ \_ _|
  47. | | | |_ __ ___ _ __ | (___ | |_) || |
  48. | | | | '_ \ / _ \ '_ \ \___ \| _ < | |
  49. | |__| | |_) | __/ | | |____) | |_) || |_
  50. \____/| .__/ \___|_| |_|_____/|____/_____|
  51. | |
  52. |_|
  53.  
  54. Platform Name : Sipeed Lichee RV Dock
  55. Platform Features : medeleg
  56. Platform HART Count : 1
  57. Platform IPI Device : aclint-mswi
  58. Platform Timer Device : aclint-mtimer @ 24000000Hz
  59. Platform Console Device : uart8250
  60. Platform HSM Device : sun20i-d1-ppu
  61. Platform PMU Device : thead,c900-pmu
  62. Platform Reboot Device : sunxi-wdt-reset
  63. Platform Shutdown Device : ---
  64. Platform Suspend Device : ---
  65. Platform CPPC Device : ---
  66. Firmware Base : 0x40000000
  67. Firmware Size : 327 KB
  68. Firmware RW Offset : 0x40000
  69. Firmware RW Size : 71 KB
  70. Firmware Heap Offset : 0x49000
  71. Firmware Heap Size : 35 KB (total), 2 KB (reserved), 9 KB (used), 23 KB (free)
  72. Firmware Scratch Size : 4096 B (total), 384 B (used), 3712 B (free)
  73. Runtime SBI Version : 2.0
  74.  
  75. Domain0 Name : root
  76. Domain0 Boot HART : 0
  77. Domain0 HARTs : 0*
  78. Domain0 Region00 : 0x0000000002500000-0x0000000002500fff M: (I,R,W) S/U: (R,W)
  79. Domain0 Region01 : 0x0000000014008000-0x000000001400bfff M: (I,R,W) S/U: ()
  80. Domain0 Region02 : 0x0000000014000000-0x0000000014007fff M: (I,R,W) S/U: ()
  81. Domain0 Region03 : 0x0000000040040000-0x000000004005ffff M: (R,W) S/U: ()
  82. Domain0 Region04 : 0x0000000040000000-0x000000004003ffff M: (R,X) S/U: ()
  83. Domain0 Region05 : 0x0000000010000000-0x0000000013ffffff M: (I,R,W) S/U: (R,W)
  84. Domain0 Region06 : 0x0000000000000000-0xffffffffffffffff M: () S/U: (R,W,X)
  85. Domain0 Next Address : 0x0000000040400000
  86. Domain0 Next Arg1 : 0x0000000040200000
  87. Domain0 Next Mode : S-mode
  88. Domain0 SysReset : yes
  89. Domain0 SysSuspend : yes
  90.  
  91. Boot HART ID : 0
  92. Boot HART Domain : root
  93. Boot HART Priv Version : v1.11
  94. Boot HART Base ISA : rv64imafdcvx
  95. Boot HART ISA Extensions : zicntr,zihpm
  96. Boot HART PMP Count : 8
  97. Boot HART PMP Granularity : 11 bits
  98. Boot HART PMP Address Bits: 38
  99. Boot HART MHPM Info : 12 (0x0003e3f8)
  100. Boot HART Debug Triggers : 0 triggers
  101. Boot HART MIDELEG : 0x0000000000020222
  102. Boot HART MEDELEG : 0x000000000000b109
  103. plic_irq_toggle irq:85,enable:1
  104. plic_irq_toggle irq:87,enable:1
  105. plic_irq_toggle irq:89,enable:1
  106. plic_irq_toggle irq:91,enable:1
  107. plic_irq_toggle irq:93,enable:1
  108. plic_irq_toggle irq:95,enable:1
  109. plic_irq_toggle irq:66,enable:1
  110. plic_irq_toggle irq:18,enable:1
  111. initialize rti_board_start:0 done
  112. initialize rt_hw_i2c_initplic_irq_toggle irq:25,enable:1
  113. [I/I2C] I2C bus [i2c0] registered
  114. :0 done
  115. initialize hal_hw_pin_init:0 done
  116. initialize rt_ktime_hrtimer_lock_init:0 done
  117. initialize rt_hw_backtrace_init:0 done
  118.  
  119. \ | /
  120. - RT - Thread Smart Operating System
  121. / | \ 5.0.2 build Oct 16 2024 07:06:10
  122. 2006 - 2022 Copyright by RT-Thread team
  123. do components initialization.
  124. initialize rti_board_end:0 done
  125. initialize dfs_init:0 done
  126. initialize rt_work_sys_workqueue_init:0 done
  127. initialize futex_system_init:0 done
  128. initialize pmutex_system_init:0 done
  129. initialize rt_hw_lcd_init:0 done
  130. initialize rt_hw_pwm_init:0 done
  131. initialize driver_sdmmc_inithal_sdc_create 0
  132. card_detect insert
  133. plic_irq_toggle irq:56,enable:1
  134. plic_irq_toggle irq:108,enable:1
  135. raoyiming +++ LCD_open_flow
  136. [E/DBG] [twi0] START can't sendout!
  137.  
  138. [E/DBG] [twi0] twi start fail
  139.  
  140. [Initial card success. capacity :15193MB
  141. sdmmc bytes_per_secotr:200, sector count:1dacc00
  142. Eytes_not found partition of mbr, construct sd0 at offset 8M, size:0xffffffffb5180000
  143. :0 done
  144. initialize null_device_init:0 done
  145. initialize random_device_init:0 done
  146. initialize urandom_device_init:0 done
  147. initialize zero_device_init:0 done
  148. initialize ptmx_register:0 done
  149. initialize critical_init:0 done
  150. initialize elm_init:0 done
  151. initialize rx_thread_init:0 done
  152. initialize fal_init_auto[D/FAL] (fal_flash_init:47) Flash device | sdcard0 | addr: 0x00000000 | len: 0xb5980000 | blk_size: 0x00000200 |initialized finish.
  153. [I/FAL] ==================== FAL partition table ====================
  154. [I/FAL] | name | flash_dev | offset | length |
  155. [I/FAL] -------------------------------------------------------------
  156. [I/FAL] | download | sdcard0 | 0x00800000 | 0x00800000 |
  157. [I/FAL] | easyflash | sdcard0 | 0x01000000 | 0x00100000 |
  158. [I/FAL] | filesystem | sdcard0 | 0x01100000 | 0x00c00000 |
  159. [I/FAL] =============================================================
  160. [I/FAL] RT-Thread Flash Abstraction Layer initialize success.
  161. :3 done
  162. initialize rt_posix_stdio_init:0 done
  163. initialize mnt_init:0 done
  164. initialize finsh_system_init:0 done
  165. Hello RISC-V
  166. ii2c xfer failure
  167.  
  168. [E/DBG] [twi0] bus is busy, status = f9
  169.  
  170. [E/DBG] [twi0] SDA is still Stuck Low, failed.
  171.  
  172. [E/DBG] i2c xfer failure
  173.  
  174. [E/DBG] [twi0] START can't sendout!
  175.  
  176. [E/DBG] [twi0] twi start fail
  177.  
  178. [E/DBG] i2c xfer failure
  179.  
  180. <0>raoyiming +++ sunxi_lcd_gpio_set_value
  181. <0>raoyiming +++ LCD_panel_init
  182. msh />Mount "sd0p0" on "/" fail
  183. lcd
  184. lcd_draw_point
  185. lcd_pwm_test
  186. msh />lcd_draw_point 100 100
  187. lcd_draw_point
  188. Darw point is x:100,y:100
  189. msh />
Advertisement
Add Comment
Please, Sign In to add comment
Public Pastes
We use cookies for various purposes including analytics. By continuing to use Pastebin, you agree to our use of cookies as described in the Cookies Policy.  OK, I Understand
Not a member of Pastebin yet?
Sign Up, it unlocks many cool features!