API tools faq
paste
Advertisement
Guest User

kernel log

a guest
Jun 20th, 2021
37
0
Never
Add comment
Not a member of Pastebin yet? Sign Up, it unlocks many cool features!
text 10.76 KB | None | 0 0
raw download clone embed print report
  1. [ 0.000000] Linux version 4.14.236 (builder@buildhost) (gcc version 7.5.0 (OpenWrt GCC 7.5.0 r11356-ec76c365c1)) #0 Mon Jun 14 09:52:25 2021
  2. [ 0.000000] bootconsole [early0] enabled
  3. [ 0.000000] CPU0 revision is: 00019374 (MIPS 24Kc)
  4. [ 0.000000] MIPS: machine is Ubiquiti UniFi AP
  5. [ 0.000000] SoC: Atheros AR7240 rev 2
  6. [ 0.000000] Determined physical RAM map:
  7. [ 0.000000] memory: 04000000 @ 00000000 (usable)
  8. [ 0.000000] Initrd not found or empty - disabling initrd
  9. [ 0.000000] Primary instruction cache 64kB, VIPT, 4-way, linesize 32 bytes.
  10. [ 0.000000] Primary data cache 32kB, 4-way, VIPT, cache aliases, linesize 32 bytes
  11. [ 0.000000] Zone ranges:
  12. [ 0.000000] Normal [mem 0x0000000000000000-0x0000000003ffffff]
  13. [ 0.000000] Movable zone start for each node
  14. [ 0.000000] Early memory node ranges
  15. [ 0.000000] node 0: [mem 0x0000000000000000-0x0000000003ffffff]
  16. [ 0.000000] Initmem setup node 0 [mem 0x0000000000000000-0x0000000003ffffff]
  17. [ 0.000000] On node 0 totalpages: 16384
  18. [ 0.000000] free_area_init_node: node 0, pgdat 804fff80, node_mem_map 810068a0
  19. [ 0.000000] Normal zone: 128 pages used for memmap
  20. [ 0.000000] Normal zone: 0 pages reserved
  21. [ 0.000000] Normal zone: 16384 pages, LIFO batch:3
  22. [ 0.000000] random: get_random_bytes called from 0x80501740 with crng_init=0
  23. [ 0.000000] pcpu-alloc: s0 r0 d32768 u32768 alloc=1*32768
  24. [ 0.000000] pcpu-alloc: [0] 0
  25. [ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 16256
  26. [ 0.000000] Kernel command line: console=ttyS0,115200 rootfstype=squashfs,jffs2
  27. [ 0.000000] PID hash table entries: 256 (order: -2, 1024 bytes)
  28. [ 0.000000] Dentry cache hash table entries: 8192 (order: 3, 32768 bytes)
  29. [ 0.000000] Inode-cache hash table entries: 4096 (order: 2, 16384 bytes)
  30. [ 0.000000] Writing ErrCtl register=00000000
  31. [ 0.000000] Readback ErrCtl register=00000000
  32. [ 0.000000] Memory: 58336K/65536K available (4042K kernel code, 154K rwdata, 532K rodata, 1212K init, 212K bss, 7200K reserved, 0K cma-reserved)
  33. [ 0.000000] SLUB: HWalign=32, Order=0-3, MinObjects=0, CPUs=1, Nodes=1
  34. [ 0.000000] NR_IRQS: 51
  35. [ 0.000000] CPU clock: 390.000 MHz
  36. [ 0.000000] clocksource: MIPS: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 9801335621 ns
  37. [ 0.000013] sched_clock: 32 bits at 195MHz, resolution 5ns, wraps every 11012737021ns
  38. [ 0.007918] Calibrating delay loop... 259.27 BogoMIPS (lpj=1296384)
  39. [ 0.084101] pid_max: default: 32768 minimum: 301
  40. [ 0.088999] Mount-cache hash table entries: 1024 (order: 0, 4096 bytes)
  41. [ 0.095610] Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes)
  42. [ 0.108473] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns
  43. [ 0.118299] futex hash table entries: 256 (order: -1, 3072 bytes)
  44. [ 0.124471] pinctrl core: initialized pinctrl subsystem
  45. [ 0.132999] NET: Registered protocol family 16
  46. [ 0.141254] PCI host bridge /ahb/apb/pcie-controller@180c0000 ranges:
  47. [ 0.147687] MEM 0x0000000010000000..0x0000000013ffffff
  48. [ 0.152943] IO 0x0000000000000000..0x0000000000000000
  49. [ 0.181467] PCI host bridge to bus 0000:00
  50. [ 0.185640] pci_bus 0000:00: root bus resource [mem 0x10000000-0x13ffffff]
  51. [ 0.192477] pci_bus 0000:00: root bus resource [io 0x0000]
  52. [ 0.198032] pci_bus 0000:00: root bus resource [??? 0x00000000 flags 0x0]
  53. [ 0.204781] pci_bus 0000:00: No busn resource found for root bus, will use [bus 00-ff]
  54. [ 0.212715] pci 0000:00:00.0: [168c:002e] type 00 class 0x028000
  55. [ 0.212797] pci 0000:00:00.0: reg 0x10: [mem 0x00000000-0x0000ffff 64bit]
  56. [ 0.212977] pci 0000:00:00.0: supports D1
  57. [ 0.212992] pci 0000:00:00.0: PME# supported from D0 D1 D3hot
  58. [ 0.213315] pci_bus 0000:00: busn_res: [bus 00-ff] end is updated to 00
  59. [ 0.213350] pci 0000:00:00.0: BAR 0: assigned [mem 0x10000000-0x1000ffff 64bit]
  60. [ 0.225009] clocksource: Switched to clocksource MIPS
  61. [ 0.231505] NET: Registered protocol family 2
  62. [ 0.237215] TCP established hash table entries: 1024 (order: 0, 4096 bytes)
  63. [ 0.244173] TCP bind hash table entries: 1024 (order: 0, 4096 bytes)
  64. [ 0.250580] TCP: Hash tables configured (established 1024 bind 1024)
  65. [ 0.257136] UDP hash table entries: 256 (order: 0, 4096 bytes)
  66. [ 0.262973] UDP-Lite hash table entries: 256 (order: 0, 4096 bytes)
  67. [ 0.269621] NET: Registered protocol family 1
  68. [ 0.274010] PCI: CLS 0 bytes, default 32
  69. [ 0.278253] Crashlog allocated RAM at address 0x3f00000
  70. [ 0.285380] workingset: timestamp_bits=30 max_order=14 bucket_order=0
  71. [ 0.299812] squashfs: version 4.0 (2009/01/31) Phillip Lougher
  72. [ 0.305677] jffs2: version 2.2 (NAND) (SUMMARY) (LZMA) (RTIME) (CMODE_PRIORITY) (c) 2001-2006 Red Hat, Inc.
  73. [ 0.328841] io scheduler noop registered
  74. [ 0.332756] io scheduler deadline registered (default)
  75. [ 0.338908] pinctrl-single 18040028.pinmux: 64 pins at pa b8040028 size 8
  76. [ 0.347039] Serial: 8250/16550 driver, 16 ports, IRQ sharing enabled
  77. [ 0.356984] console [ttyS0] disabled
  78. [ 0.360604] 18020000.uart: ttyS0 at MMIO 0x18020000 (irq = 9, base_baud = 12187500) is a 16550A
  79. [ 0.369340] console [ttyS0] enabled
  80. [ 0.376351] bootconsole [early0] disabled
  81. [ 0.396851] m25p80 spi0.0: mx25l6405d (8192 Kbytes)
  82. [ 0.401826] 6 fixed-partitions partitions found on MTD device spi0.0
  83. [ 0.408272] Creating 6 MTD partitions on "spi0.0":
  84. [ 0.413088] 0x000000000000-0x000000040000 : "u-boot"
  85. [ 0.419236] 0x000000040000-0x000000050000 : "u-boot-env"
  86. [ 0.425743] 0x000000050000-0x0000007a0000 : "firmware"
  87. [ 0.435722] 2 uimage-fw partitions found on MTD device firmware
  88. [ 0.441675] Creating 2 MTD partitions on "firmware":
  89. [ 0.446734] 0x000000000000-0x000000190000 : "kernel"
  90. [ 0.452808] 0x000000190000-0x000000750000 : "rootfs"
  91. [ 0.458886] mtd: device 4 (rootfs) set to be root filesystem
  92. [ 0.464609] 1 squashfs-split partitions found on MTD device rootfs
  93. [ 0.470894] 0x000000400000-0x000000750000 : "rootfs_data"
  94. [ 0.477388] 0x0000007a0000-0x0000007b0000 : "board_config"
  95. [ 0.483938] 0x0000007b0000-0x0000007f0000 : "cfg"
  96. [ 0.489838] 0x0000007f0000-0x000000800000 : "art"
  97. [ 0.497274] libphy: Fixed MDIO Bus: probed
  98. [ 0.835477] libphy: ag71xx_mdio: probed
  99. [ 0.840315] libphy: ar8xxx-mdio: probed
  100. [ 0.845608] switch0: Atheros AR724X/AR933X built-in rev. 0 switch registered on mdio-bus.0
  101. [ 1.226624] ag71xx 19000000.eth: connected to PHY at mdio-bus.0:1f:04 [uid=00000000, driver=Generic PHY]
  102. [ 1.237102] eth0: Atheros AG71xx at 0xb9000000, irq 4, mode: mii
  103. [ 1.246224] NET: Registered protocol family 10
  104. [ 1.257287] Segment Routing with IPv6
  105. [ 1.261094] NET: Registered protocol family 17
  106. [ 1.265690] bridge: filtering via arp/ip/ip6tables is no longer available by default. Update your scripts to load br_netfilter if you need this.
  107. [ 1.278713] 8021q: 802.1Q VLAN Support v1.8
  108. [ 1.285285] hctosys: unable to open rtc device (rtc0)
  109. [ 1.296865] VFS: Mounted root (squashfs filesystem) readonly on device 31:4.
  110. [ 1.314048] Freeing unused kernel memory: 1212K
  111. [ 1.318635] This architecture does not have kernel memory protection.
  112. [ 2.353794] init: Console is alive
  113. [ 2.357613] init: - watchdog -
  114. [ 2.515028] random: fast init done
  115. [ 3.583553] kmodloader: loading kernel modules from /etc/modules-boot.d/*
  116. [ 3.712770] usbcore: registered new interface driver usbfs
  117. [ 3.718456] usbcore: registered new interface driver hub
  118. [ 3.723897] usbcore: registered new device driver usb
  119. [ 3.736530] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
  120. [ 3.745418] ehci-platform: EHCI generic platform driver
  121. [ 3.751614] kmodloader: done loading kernel modules from /etc/modules-boot.d/*
  122. [ 3.769525] init: - preinit -
  123. [ 5.121486] random: jshn: uninitialized urandom read (4 bytes read)
  124. [ 5.460509] random: jshn: uninitialized urandom read (4 bytes read)
  125. [ 5.516559] random: jshn: uninitialized urandom read (4 bytes read)
  126. [ 5.800397] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
  127. [ 9.124707] jffs2: notice: (459) jffs2_build_xattr_subsystem: complete building xattr subsystem, 1 of xdatum (0 unchecked, 1 orphan) and 1 of xref (1 dead, 0 orphan) found.
  128. [ 9.142381] mount_root: switching to jffs2 overlay
  129. [ 9.181490] overlayfs: upper fs does not support tmpfile.
  130. [ 9.194630] urandom-seed: Seeding with /etc/urandom.seed
  131. [ 9.503813] procd: - early -
  132. [ 9.506943] procd: - watchdog -
  133. [ 10.308848] procd: - watchdog -
  134. [ 10.312400] procd: - ubus -
  135. [ 10.639033] urandom_read: 5 callbacks suppressed
  136. [ 10.639044] random: ubusd: uninitialized urandom read (4 bytes read)
  137. [ 10.760214] random: ubusd: uninitialized urandom read (4 bytes read)
  138. [ 10.768486] procd: - init -
  139. [ 11.698611] kmodloader: loading kernel modules from /etc/modules.d/*
  140. [ 11.941325] ip6_tables: (C) 2000-2006 Netfilter Core Team
  141. [ 11.969321] Loading modules backported from Linux version v4.19.193-0-g1722257b8ece
  142. [ 11.977095] Backport generated by backports.git v4.19.193-1-0-gaa2cc8ea
  143. [ 12.008241] ip_tables: (C) 2000-2006 Netfilter Core Team
  144. [ 12.036638] nf_conntrack version 0.5.0 (1024 buckets, 4096 max)
  145. [ 12.197717] xt_time: kernel timezone is -0000
  146. [ 12.352285] PPP generic driver version 2.4.2
  147. [ 12.376243] NET: Registered protocol family 24
  148. [ 12.478317] ath: phy0: Ignoring endianness difference in EEPROM magic bytes.
  149. [ 12.486939] ath: EEPROM regdomain: 0x0
  150. [ 12.486946] ath: EEPROM indicates default country code should be used
  151. [ 12.486951] ath: doing EEPROM country->regdmn map search
  152. [ 12.486970] ath: country maps to regdmn code: 0x3a
  153. [ 12.486978] ath: Country alpha2 being used: US
  154. [ 12.486983] ath: Regpair used: 0x3a
  155. [ 12.504684] ieee80211 phy0: Selected rate control algorithm 'minstrel_ht'
  156. [ 12.507383] ieee80211 phy0: Atheros AR9287 Rev:2 mem=0xb0000000, irq=12
  157. [ 12.655570] kmodloader: done loading kernel modules from /etc/modules.d/*
  158. [ 12.861822] urngd: v1.0.2 started.
  159. [ 13.880463] random: crng init done
  160. [ 31.579043] br-lan: port 1(eth0) entered blocking state
  161. [ 31.584310] br-lan: port 1(eth0) entered disabled state
  162. [ 31.590039] device eth0 entered promiscuous mode
  163. [ 31.637007] IPv6: ADDRCONF(NETDEV_UP): br-lan: link is not ready
  164. [ 35.915485] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
  165. [ 35.950622] br-lan: port 2(wlan0) entered blocking state
  166. [ 35.956071] br-lan: port 2(wlan0) entered disabled state
  167. [ 35.961988] device wlan0 entered promiscuous mode
  168. [ 36.016153] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
  169. [ 36.022811] br-lan: port 2(wlan0) entered blocking state
  170. [ 36.028217] br-lan: port 2(wlan0) entered forwarding state
  171. [ 36.052996] IPv6: ADDRCONF(NETDEV_CHANGE): br-lan: link becomes ready
Advertisement
Add Comment
Please, Sign In to add comment
Advertisement
Public Pastes
Advertisement
We use cookies for various purposes including analytics. By continuing to use Pastebin, you agree to our use of cookies as described in the Cookies Policy.  OK, I Understand
Not a member of Pastebin yet?
Sign Up, it unlocks many cool features!