DDR Version 1.22 20190506
In
channel 0
CS = 0
MR0=0x19
MR4=0x3
MR5=0x6
MR8=0x8
MR12=0x72
MR14=0x72
MR18=0x0
MR19=0x0
MR24=0x8
MR25=0xFF
CS = 1
MR0=0x19
MR4=0x3
MR5=0x6
MR8=0x8
MR12=0x72
MR14=0x72
MR18=0x0
MR19=0x0
MR24=0x8
MR25=0xFF
channel 1
CS = 0
MR0=0x9
MR4=0x3
MR5=0x6
MR8=0x8
MR12=0x62
MR14=0x62
MR18=0x0
MR19=0x0
MR24=0x8
MR25=0xEF
CS = 1
MR0=0x9
MR4=0x3
MR5=0x6
MR8=0x8
MR12=0x62
MR14=0x62
MR18=0x0
MR19=0x0
MR24=0x8
MR25=0xEF
channel 0 training pass!
channel 1 training pass!
change freq to 416MHz 0,1
Channel 0: LPDDR4,416MHz
Bus Width=32 Col=10 Bank=8 Row=15/15 CS=2 Die Bus-Width=16 Size=2048MB
Channel 1: LPDDR4,416MHz
W FF != R
Cap error!
no stride
channel 0
CS = 0
MR0=0x19
MR4=0x3
MR5=0x6
MR8=0x8
MR12=0x72
MR14=0x72
MR18=0x0
MR19=0x0
MR24=0x8
MR25=0xFF
CS = 1
MR0=0x19
MR4=0x3
MR5=0x6
MR8=0x8
MR12=0x72
MR14=0x72
MR18=0x0
MR19=0x0
MR24=0x8
MR25=0xFF
channel 0 training pass!
channel 0, cs 0, advanced training done
channel 0, cs 1, advanced training done
change freq to 856MHz 1,0
ch 0 ddrconfig = 0x101, ddrsize = 0x2020
pmugrf_os_reg[2] = 0x1000EAA1, stride = 0x17
OUT
Boot1: 2019-03-14, version: 1.19
CPUId = 0x0
ChipType = 0x10, 254
SdmmcInit=2 0
BootCapSize=100000
UserCapSize=29820MB
FwPartOffset=2000 , 100000
mmc0:cmd5,20
SdmmcInit=0 0
BootCapSize=0
UserCapSize=15193MB
FwPartOffset=2000 , 0
StorageInit ok = 196596
SecureMode = 0
SecureInit read PBA: 0x4
SecureInit read PBA: 0x404
SecureInit read PBA: 0x804
SecureInit read PBA: 0xc04
SecureInit read PBA: 0x1004
SecureInit read PBA: 0x1404
SecureInit read PBA: 0x1804
SecureInit read PBA: 0x1c04
SecureInit ret = 0, SecureMode = 0
atags_set_bootdev: ret:(0)
GPT 0x3380ec0 signature is wrong
recovery gpt...
GPT 0x3380ec0 signature is wrong
recovery gpt fail!
LoadTrust Addr:0x4000
LoadTrust Addr:0x4400
LoadTrust Addr:0x4800
LoadTrust Addr:0x4c00
LoadTrust Addr:0x5000
LoadTrust Addr:0x5400
LoadTrust Addr:0x5800
LoadTrust Addr:0x5c00
Addr:0x4000 No find trust.img!
LoadTrustBL error:-3
SecureMode = 0
SecureInit read PBA: 0x4
SecureInit read PBA: 0x404
SecureInit read PBA: 0x804
SecureInit read PBA: 0xc04
SecureInit read PBA: 0x1004
SecureInit read PBA: 0x1404
SecureInit read PBA: 0x1804
SecureInit read PBA: 0x1c04
SecureInit ret = 0, SecureMode = 0
atags_set_bootdev: ret:(0)
GPT part:  0, name:            uboot, start:0x4000, size:0x2000
GPT part:  1, name:            trust, start:0x6000, size:0x2000
GPT part:  2, name:             misc, start:0x8000, size:0x2000
GPT part:  3, name:              dtb, start:0x22000, size:0x2000
GPT part:  4, name:             dtbo, start:0x24000, size:0x2000
GPT part:  5, name:           vbmeta, start:0x26000, size:0x800
GPT part:  6, name:             boot, start:0x26800, size:0x10000
GPT part:  7, name:         recovery, start:0x36800, size:0x20000
GPT part:  8, name:           backup, start:0x56800, size:0x38000
GPT part:  9, name:         security, start:0x8e800, size:0x2000
GPT part: 10, name:            cache, start:0x90800, size:0x100000
GPT part: 11, name:           system, start:0x190800, size:0x500000
GPT part: 12, name:         metadata, start:0x690800, size:0x8000
GPT part: 13, name:           vendor, start:0x698800, size:0x100000
GPT part: 14, name:              oem, start:0x798800, size:0x100000
GPT part: 15, name:              frp, start:0x898800, size:0x400
GPT part: 16, name:         userdata, start:0x898c00, size:0x31a53df
find part:uboot OK. first_lba:0x4000.
find part:trust OK. first_lba:0x6000.
LoadTrust Addr:0x6000
No find bl30.bin
Load uboot, ReadLba = 4000
Load OK, addr=0x200000, size=0xe83d8
RunBL31 0x10000
NOTICE:  BL31: v1.3(debug):51f2096
NOTICE:  BL31: Built : 16:24:31, May  6 2019
NOTICE:  BL31: Rockchip release version: v1.1
INFO:    GICv3 with legacy support detected. ARM GICV3 driver initialized in EL3
INFO:    Using opteed sec cpu_context!
INFO:    boot cpu mask: 0
INFO:    plat_rockchip_pmu_init(1181): pd status 3e
INFO:    BL31: Initializing runtime services
INFO:    BL31: Initializing BL32
INF [0x0] TEE-CORE:init_primary_helper:337: Initializing (1.1.0-195-g8f090d20 #6 Fri De)

INF [0x0] TEE-CORE:init_primary_helper:338: Release version: 1.2

INF [0x0] TEE-CORE:init_teecore:83: teecore inits done
INFO:    BL31: Preparing for EL3 exit to normal world
INFO:    Entry point address = 0x200000
INFO:    SPSR = 0x3c9


U-Boot 2017.09-g0bfc064 (Dec 05 2019 - 01:59:10 +0800)

Model: Khadas-RK3399 khadas Board
PreSerial: 2
DRAM:  2 GiB
Sysmem: init
Relocation Offset is: 7dbdd000
Using default environment

dwmmc@fe320000: 1, sdhci@fe330000: 0
Bootdev(atags): mmc 0
PartType: EFI
boot mode: None
Load FDT from boot part
DTB: rk-kernel.dtb
ANDROID: fdt overlay OK
I2c speed: 400000Hz
PMIC:  RK808
vdd_center 900000 uV
vdd_cpu_l 900000 uV
vdd_log 980000 uV
Model: Khadas Board
Rockchip UBOOT DRM driver version: v1.0.1
Using display timing dts
Detailed mode clock 120000 kHz, flags[a]
    H: 1088 1192 1196 1323
    V: 1920 1924 1926 1929
bus_format: 100e
final DSI-Link bandwidth: 996 Mbps x 4
CLK: (uboot. arml: enter 816000 KHz, init 816000 KHz, kernel 0N/A)
CLK: (uboot. armb: enter 24000 KHz, init 24000 KHz, kernel 0N/A)
  aplll 816000 KHz
  apllb 24000 KHz
  dpll 856000 KHz
  cpll 120000 KHz
  gpll 800000 KHz
  npll 600000 KHz
  vpll 24000 KHz
  aclk_perihp 133333 KHz
  hclk_perihp 66666 KHz
  pclk_perihp 33333 KHz
  aclk_perilp0 266666 KHz
  hclk_perilp0 88888 KHz
  pclk_perilp0 44444 KHz
  hclk_perilp1 100000 KHz
  pclk_perilp1 50000 KHz
Net:   eth0: ethernet@fe300000
Setting bus to 8
I2c speed: 100000Hz
normal power on
boot wol: disable
detect_board val=203
board type = Edge-V (2)(val=203)
mac address: c8:63:14:70:55:d3
Hit any key to stop autoboot:  0
ANDROID: reboot reason: "(none)"
SecureBoot enabled, AVB verify
read_is_device_unlocked() ops returned that device is UNLOCKED
avb_slot_verify.c:637: ERROR: vbmeta: Error verifying vbmeta image: OK_NOT_SIGNED
FDT load addr 0x10f00000 size 152 KiB
Booting IMAGE kernel at 0x00280000 with fdt at 0x8300000...


## Booting Android Image at 0x0027f800 ...
Kernel load addr 0x00280000 size 19151 KiB
RAM disk load addr 0x01534000 size 338 KiB
## Flattened Device Tree blob at 08300000
   Booting using the fdt blob at 0x8300000
   XIP Kernel Image ... OK
   Loading Ramdisk to 71d7a000, end 71dce794 ... OK
   Loading Device Tree to 0000000071d5c000, end 0000000071d79c05 ... OK
Adding bank: 0x00200000 - 0x08400000 (size: 0x08200000)
Adding bank: 0x0a200000 - 0x80000000 (size: 0x75e00000)
Total: 2318.566 ms

Starting kernel ...