OpenBSD 5.0 (GENERIC) #43: Wed Aug 17 10:10:52 MDT 2011
    deraadt@i386.openbsd.org:/usr/src/sys/arch/i386/compile/GENERIC
cpu0: Intel Pentium III ("GenuineIntel" 686-class) 734 MHz
cpu0: FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,SEP,MTRR,PGE,MCA,CMOV,PSE36,SER,MMX,FXSR,SSE
real mem  = 133689344 (127MB)
avail mem = 121520128 (115MB)
mainbus0 at root
bios0 at mainbus0: AT/286+ BIOS, date 06/02/00, BIOS32 rev. 0 @ 0xfb260, SMBIOS rev. 2.2 @ 0xf0800 (26 entries)
bios0: vendor Award Software International, Inc. version "4.60 PGMA" date 06/02/00
bios0: VIA Technologies, Inc. VT82C694X
apm0 at bios0: Power Management spec V1.2 (slowidle)
acpi at bios0 function 0x0 not configured
pcibios0 at bios0: rev 2.1 @ 0xf0000/0xb6d8
pcibios0: PCI IRQ Routing Table rev 1.0 @ 0xfdcc0/112 (5 entries)
pcibios0: PCI Exclusive IRQs: 5 10 11 12
pcibios0: PCI Interrupt Router at 000:07:0 ("VIA VT82C596A ISA" rev 0x00)
pcibios0: PCI bus #1 is the last bus
bios0: ROM list: 0xc0000/0xcc00 0xd0000/0x4000!
cpu0 at mainbus0: (uniprocessor)
pci0 at mainbus0 bus 0: configuration mode 1 (bios)
pchb0 at pci0 dev 0 function 0 "VIA VT82C691 PCI" rev 0xc4
viaagp0 at pchb0: v2
agp0 at viaagp0: aperture at 0xe8000000, size 0x10000000
ppb0 at pci0 dev 1 function 0 "VIA VT82C598 AGP" rev 0x00
pci1 at ppb0 bus 1
vga1 at pci1 dev 0 function 0 "NVIDIA GeForce2 MX" rev 0xb2
wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation)
wsdisplay0: screen 1-5 added (80x25, vt100 emulation)
pcib0 at pci0 dev 7 function 0 "VIA VT82C686 ISA" rev 0x22
pciide0 at pci0 dev 7 function 1 "VIA VT82C571 IDE" rev 0x10: ATA66, channel 0 configured to compatibility, channel 1 configured to compatibility
wd0 at pciide0 channel 0 drive 0: <ST320423A>
wd0: 32-sector PIO, LBA, 19536MB, 40011300 sectors
wd0(pciide0:0:0): using PIO mode 4, Ultra-DMA mode 4
atapiscsi0 at pciide0 channel 1 drive 0
scsibus0 at atapiscsi0: 2 targets
cd0 at scsibus0 targ 0 lun 0: <PIONEER, DVD-ROM DVD-116, 1.22> ATAPI 5/cdrom removable
cd0(pciide0:1:0): using PIO mode 4, Ultra-DMA mode 4
uhci0 at pci0 dev 7 function 2 "VIA VT83C572 USB" rev 0x10: irq 10
uhci1 at pci0 dev 7 function 3 "VIA VT83C572 USB" rev 0x10: irq 10
viapm0 at pci0 dev 7 function 4 "VIA VT82C686 SMBus" rev 0x30: SMI
iic0 at viapm0
spdmem0 at iic0 addr 0x50: 128MB SDRAM non-parity PC133CL2
viapm0: 24-bit timer at 3579545Hz
auvia0 at pci0 dev 7 function 5 "VIA VT82C686 AC97" rev 0x20: irq 12
ac97: codec id 0x41445348 (Analog Devices AD1881A)
ac97: codec features headphone, Analog Devices Phat Stereo
audio0 at auvia0
uhci2 at pci0 dev 11 function 0 "VIA VT83C572 USB" rev 0x62: irq 5
uhci3 at pci0 dev 11 function 1 "VIA VT83C572 USB" rev 0x62: irq 12
ehci0 at pci0 dev 11 function 2 "VIA VT6202 USB" rev 0x65: irq 10
usb0 at ehci0: USB revision 2.0
uhub0 at usb0 "VIA EHCI root hub" rev 2.00/1.00 addr 1
isa0 at pcib0
isadma0 at isa0
com0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte fifo
com1 at isa0 port 0x2f8/8 irq 3: ns16550a, 16 byte fifo
pckbc0 at isa0 port 0x60/5
pckbd0 at pckbc0 (kbd slot)
pckbc0: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard, using wsdisplay0
pcppi0 at isa0 port 0x61
spkr0 at pcppi0
lpt0 at isa0 port 0x378/4 irq 7
npx0 at isa0 port 0xf0/16: reported by CPUID; using exception 16
usb1 at uhci0: USB revision 1.0
uhub1 at usb1 "VIA UHCI root hub" rev 1.00/1.00 addr 1
usb2 at uhci1: USB revision 1.0
uhub2 at usb2 "VIA UHCI root hub" rev 1.00/1.00 addr 1
usb3 at uhci2: USB revision 1.0
uhub3 at usb3 "VIA UHCI root hub" rev 1.00/1.00 addr 1
usb4 at uhci3: USB revision 1.0
uhub4 at usb4 "VIA UHCI root hub" rev 1.00/1.00 addr 1
mtrr: Pentium Pro MTRR support
uhidev0 at uhub4 port 1 configuration 1 interface 0 "MosArt Optical Mouse" rev 1.10/0.00 addr 2
uhidev0: iclass 3/1
ums0 at uhidev0: 3 buttons, Z dir
wsmouse0 at ums0 mux 0
vscsi0 at root
scsibus1 at vscsi0: 256 targets
softraid0 at root
scsibus2 at softraid0: 256 targets
root on wd0a (560489ba79debd13.a) swap on wd0b dump on wd0b
ugen0 at uhub4 port 2 "2Wire Inc 2Wire USB Remote NDIS Ethernet" rev 1.01/1.00 addr 3

$ usbdevs -v
Controller /dev/usb0:
addr 1: high speed, self powered, config 1, EHCI root hub(0x0000), VIA(0x1106), rev 1.00
 port 1 addr 2: high speed, power 100 mA, config 1, Flash Disk(0x1234), Generic(0x5678), rev 1.00, iSerialNumber CCBB1111301022290221548405
 port 2 powered
 port 3 powered
 port 4 powered
Controller /dev/usb1:
addr 1: full speed, self powered, config 1, UHCI root hub(0x0000), VIA(0x1106), rev 1.00
 port 1 powered
 port 2 powered
Controller /dev/usb2:
addr 1: full speed, self powered, config 1, UHCI root hub(0x0000), VIA(0x1106), rev 1.00
 port 1 powered
 port 2 powered
Controller /dev/usb3:
addr 1: full speed, self powered, config 1, UHCI root hub(0x0000), VIA(0x1106), rev 1.00
 port 1 powered
 port 2 powered
Controller /dev/usb4:
addr 1: full speed, self powered, config 1, UHCI root hub(0x0000), VIA(0x1106), rev 1.00
 port 1 addr 2: low speed, power 100 mA, config 1, Optical Mouse(0x0003), MosArt(0x062a), rev 0.00
 port 2 addr 3: full speed, self powered, config 1, 2Wire USB Remote NDIS Ethernet(0x0042), 2Wire Inc(0x1630), rev 1.00
$ usbctl -a3 -f/dev/usb4
DEVICE addr 3
DEVICE descriptor:
bLength=18 bDescriptorType=device(1) bcdUSB=1.01 bDeviceClass=2 bDeviceSubClass=0
bDeviceProtocol=0 bMaxPacketSize=8 idVendor=0x1630 idProduct=0x0042 bcdDevice=100
iManufacturer=1(2Wire Inc) iProduct=2(2Wire USB Remote NDIS Ethernet) iSerialNumber=0() bNumConfigurations=1

CONFIGURATION descriptor 0:
bLength=9 bDescriptorType=config(2) wTotalLength=67 bNumInterface=2
bConfigurationValue=1 iConfiguration=4(2WIREHPL) bmAttributes=e0 bMaxPower=40 mA

INTERFACE descriptor 0:
bLength=9 bDescriptorType=interface(4) bInterfaceNumber=0 bAlternateSetting=0
bNumEndpoints=1 bInterfaceClass=2 bInterfaceSubClass=2
bInterfaceProtocol=255 iInterface=5(ndis5)

ENDPOINT descriptor:
bLength=7 bDescriptorType=endpoint(5) bEndpointAddress=1-in
bmAttributes=interrupt wMaxPacketSize=8 bInterval=1

CDC INTERFACE descriptor:
bLength=5 bDescriptorType=cs_interface(36) bDescriptorSubtype=header
bcdCDC=1.00

CDC INTERFACE descriptor:
bLength=5 bDescriptorType=cs_interface(36) bDescriptorSubtype=Call_Management
bmCapabilities=0x0 bDataInterface=1

CDC INTERFACE descriptor:
bLength=4 bDescriptorType=cs_interface(36) bDescriptorSubtype=Abstract_Control_Model
bmCapabilities=0x0

CDC INTERFACE descriptor:
bLength=5 bDescriptorType=cs_interface(36) bDescriptorSubtype=union
bMasterInterface=0 bSlaveInterface0=1

INTERFACE descriptor 1:
bLength=9 bDescriptorType=interface(4) bInterfaceNumber=1 bAlternateSetting=0
bNumEndpoints=2 bInterfaceClass=10 bInterfaceSubClass=0
bInterfaceProtocol=0 iInterface=6(ethernet)

ENDPOINT descriptor:
bLength=7 bDescriptorType=endpoint(5) bEndpointAddress=2-in
bmAttributes=bulk wMaxPacketSize=64 bInterval=0

ENDPOINT descriptor:
bLength=7 bDescriptorType=endpoint(5) bEndpointAddress=3-out
bmAttributes=bulk wMaxPacketSize=64 bInterval=0

current configuration 1

----------