API tools faq
paste
Guest User

Untitled

a guest
Jul 23rd, 2021
154
0
Never
Add comment
Not a member of Pastebin yet? Sign Up, it unlocks many cool features!
text 6.96 KB | None | 0 0
raw download clone embed print report
  1. U-Boot 2019.01 (Oct 25 2019 - 08:25:25 +0000)
  2.  
  3. Model: ZynqMP ZCU102 Rev1.0
  4. Board: Xilinx ZynqMP
  5. DRAM: 4 GiB
  6. EL Level: EL2
  7. Chip ID: zu9eg
  8. MMC: mmc@ff170000: 0
  9. Loading Environment from SPI Flash... SF: Detected n25q512a with page size 512 Bytes, erase size 128 KiB, total 128 MiB
  10. OK
  11. In: serial@ff000000
  12. Out: serial@ff000000
  13. Err: serial@ff000000
  14. Model: ZynqMP ZCU102 Rev1.0
  15. Board: Xilinx ZynqMP
  16. Net: ZYNQ GEM: ff0e0000, phyaddr c, interface rgmii-id
  17.  
  18. Warning: ethernet@ff0e0000 MAC addresses don't match:
  19. Address in ROM is ff:ff:ff:ff:ff:ff
  20. Address in environment is 00:0a:35:00:22:01
  21. eth0: ethernet@ff0e0000
  22. Hit any key to stop autoboot: 0
  23. Using ethernet@ff0e0000 device
  24. TFTP from server 192.168.0.1; our IP address is 192.168.0.2
  25. Filename 'boot.scr'.
  26. Load address: 0xc00000
  27. Loading: #
  28. 237.3 KiB/s
  29. done
  30. Bytes transferred = 974 (3ce hex)
  31. ## Executing script at 00c00000
  32. Using ethernet@ff0e0000 device
  33. TFTP from server 192.168.0.1; our IP address is 192.168.0.2
  34. Filename '2021.1/xen'.
  35. Load address: 0xc01000
  36. Loading: #################################################################
  37. #########
  38. 2.5 MiB/s
  39. done
  40. Bytes transferred = 1081352 (108008 hex)
  41. Using ethernet@ff0e0000 device
  42. TFTP from server 192.168.0.1; our IP address is 192.168.0.2
  43. Filename '2021.1/xen-Image-5.10'.
  44. Load address: 0xd0a000
  45. Loading: ###################################T ###T ###########################
  46. #################################################################
  47. #################################################################
  48. #################################################################
  49. #################################################################
  50. #################################################################
  51. #################################################################
  52. #################################################################
  53. #################################################################
  54. #################################################################
  55. #################################################################
  56. #################################################################
  57. #################################################################
  58. ######
  59. 834 KiB/s
  60. done
  61. Bytes transferred = 12479370 (be6b8a hex)
  62. Using ethernet@ff0e0000 device
  63. TFTP from server 192.168.0.1; our IP address is 192.168.0.2
  64. Filename '2021.1/initrd.cpio'.
  65. Load address: 0x18f1000
  66. Loading: #################################################################
  67. ############################################
  68. 2.5 MiB/s
  69. done
  70. Bytes transferred = 1586176 (183400 hex)
  71. Using ethernet@ff0e0000 device
  72. TFTP from server 192.168.0.1; our IP address is 192.168.0.2
  73. Filename '2021.1/xen.dtb'.
  74. Load address: 0x1a75000
  75. Loading: ###
  76. 2.3 MiB/s
  77. done
  78. Bytes transferred = 40577 (9e81 hex)
  79. ## Flattened Device Tree blob at 01a75000
  80. Booting using the fdt blob at 0x1a75000
  81. reserving fdt memory region: addr=1a75000 size=b000
  82. Using Device Tree in place at 0000000001a75000, end 0000000001a82fff
  83.  
  84. Starting kernel ...
  85.  
  86. Xen 4.16-unstable
  87. (XEN) Xen version 4.16-unstable (sstabellini@) (aarch64-linux-gnu-gcc (Linaro GCC 7.3-2018.05) 7.3.1 20180425 [linaro-7.3-2018.05 revision d29120a424ecfbc167ef90065c0eeb7f91977701]) debug=y Fri Jul 23 09:37:27 PDT 2021
  88. (XEN) Latest ChangeSet: Tue Apr 13 10:59:05 2021 -0700 git:f44b1a6ede
  89. (XEN) build-id: 80a6aefb1558953b822785594b504245d4167e1b
  90. (XEN) Processor: 00000000410fd034: "ARM Limited", variant: 0x0, part 0xd03,rev 0x4
  91. (XEN) 64-bit Execution:
  92. (XEN) Processor Features: 0000000000002222 0000000000000000
  93. (XEN) Exception Levels: EL3:64+32 EL2:64+32 EL1:64+32 EL0:64+32
  94. (XEN) Extensions: FloatingPoint AdvancedSIMD
  95. (XEN) Debug Features: 0000000010305106 0000000000000000
  96. (XEN) Auxiliary Features: 0000000000000000 0000000000000000
  97. (XEN) Memory Model Features: 0000000000001122 0000000000000000
  98. (XEN) ISA Features: 0000000000011120 0000000000000000
  99. (XEN) 32-bit Execution:
  100. (XEN) Processor Features: 0000000000000131:0000000000011011
  101. (XEN) Instruction Sets: AArch32 A32 Thumb Thumb-2 Jazelle
  102. (XEN) Extensions: GenericTimer Security
  103. (XEN) Debug Features: 0000000003010066
  104. (XEN) Auxiliary Features: 0000000000000000
  105. (XEN) Memory Model Features: 0000000010201105 0000000040000000
  106. (XEN) 0000000001260000 0000000002102211
  107. (XEN) ISA Features: 0000000002101110 0000000013112111 0000000021232042
  108. (XEN) 0000000001112131 0000000000011142 0000000000011121
  109. (XEN) Using SMC Calling Convention v1.1
  110. (XEN) Using PSCI v1.1
  111. (XEN) SMP: Allowing 4 CPUs
  112. (XEN) Generic Timer IRQ: phys=30 hyp=26 virt=27 Freq: 99990 KHz
  113. (XEN) GICv2 initialization:
  114. (XEN) gic_dist_addr=00000000f9010000
  115. (XEN) gic_cpu_addr=00000000f9020000
  116. (XEN) gic_hyp_addr=00000000f9040000
  117. (XEN) gic_vcpu_addr=00000000f9060000
  118. (XEN) gic_maintenance_irq=25
  119. (XEN) GICv2: Adjusting CPU interface base to 0xf902f000
  120. (XEN) GICv2: 192 lines, 4 cpus, secure (IID 0200143b).
  121. (XEN) XSM Framework v1.0.0 initialized
  122. (XEN) Initialising XSM SILO mode
  123. (XEN) Using scheduler: null Scheduler (null)
  124. (XEN) Initializing null scheduler
  125. (XEN) WARNING: This is experimental software in development.
  126. (XEN) Use at your own risk.
  127. (XEN) Allocated console ring of 32 KiB.
  128. (XEN) CPU0: Guest atomics will try 12 times before pausing the domain
  129. (XEN) Bringing up CPU1
  130. (XEN) CPU1: Guest atomics will try 13 times before pausing the domain
  131. (XEN) CPU 1 booted.
  132. (XEN) Bringing up CPU2
  133. (XEN) CPU2: Guest atomics will try 13 times before pausing the domain
  134. (XEN) CPU 2 booted.
  135. (XEN) Bringing up CPU3
  136. (XEN) CPU3: Guest atomics will try 13 times before pausing the domain
  137. (XEN) Brought up 4 CPUs
  138. (XEN) CPU 3 booted.
  139. (XEN) smmu: /smmu@fd800000: probing hardware configuration...
  140. (XEN) smmu: /smmu@fd800000: SMMUv2 with:
  141. (XEN) smmu: /smmu@fd800000: stage 2 translation
  142. (XEN) smmu: /smmu@fd800000: stream matching with 48 register groups, mask 0x7fff<2>smmu: /smmu@fd800000: 16 context banks (0 stage-2 only)
  143. (XEN) smmu: /smmu@fd800000: Stage-2: 48-bit IPA -> 48-bit PA
  144. (XEN) smmu: /smmu@fd800000: registered 29 master devices
  145. (XEN) I/O virtualisation enabled
  146. (XEN) - Dom0 mode: Relaxed
  147. (XEN) P2M: 40-bit IPA with 40-bit PA and 8-bit VMID
  148. (XEN) P2M: 3 levels with order-1 root, VTCR 0x0000000080023558
  149. (XEN) Scheduling granularity: cpu, 1 CPU per sched-resource
  150. (XEN) alternatives: Patching with alt table 00000000002dc410 -> 00000000002dcc20
  151. (XEN) *** LOADING DOMAIN 0 ***
  152. (XEN) Loading d0 kernel from boot module @ 0000000000d0a000
  153. (XEN) Loading ramdisk from boot module @ 00000000018f1000
  154. (XEN)
  155. (XEN) ****************************************
  156. (XEN) Panic on CPU 0:
  157. (XEN) invalid compressed format (err=1)
  158. (XEN) ****************************************
  159. (XEN)
  160. (XEN) Reboot in five seconds...
Advertisement
Add Comment
Please, Sign In to add comment
Public Pastes
We use cookies for various purposes including analytics. By continuing to use Pastebin, you agree to our use of cookies as described in the Cookies Policy.  OK, I Understand
Not a member of Pastebin yet?
Sign Up, it unlocks many cool features!