API tools faq
paste
Guest User

Untitled

a guest
Dec 18th, 2018
194
0
Never
Add comment
Not a member of Pastebin yet? Sign Up, it unlocks many cool features!
text 21.75 KB | None | 0 0
raw download clone embed print report
  1. [ 0.000000] Booting Linux on physical CPU 0x0
  2. [ 0.000000] Linux version 4.9.87-2.8.4+g3bb6e3284a1b (oe-user@oe-host) (gcc version 7.3.0 (GCC) ) #1 SMP Mon Dec 17 15:22:49 UTC 2018
  3. [ 0.000000] CPU: ARMv7 Processor [412fc09a] revision 10 (ARMv7), cr=10c5387d
  4. [ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache
  5. [ 0.000000] OF: fdt:Machine model: Toradex Apalis iMX6Q/D Module on Ixora V1.1 Carrier Board
  6. [ 0.000000] Reserved memory: created CMA memory pool at 0x3c000000, size 320 MiB
  7. [ 0.000000] OF: reserved mem: initialized node linux,cma, compatible id shared-dma-pool
  8. [ 0.000000] Memory policy: Data cache writealloc
  9. [ 0.000000] On node 0 totalpages: 262144
  10. [ 0.000000] free_area_init_node: node 0, pgdat 80c44e40, node_mem_map ab757000
  11. [ 0.000000] Normal zone: 2048 pages used for memmap
  12. [ 0.000000] Normal zone: 0 pages reserved
  13. [ 0.000000] Normal zone: 262144 pages, LIFO batch:31
  14. [ 0.000000] percpu: Embedded 14 pages/cpu @ab6f7000 s25612 r8192 d23540 u57344
  15. [ 0.000000] pcpu-alloc: s25612 r8192 d23540 u57344 alloc=14*4096
  16. [ 0.000000] pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3
  17. [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 260096
  18. [ 0.000000] Kernel command line: vmalloc=400M user_debug=30 ip=off root=/dev/mmcblk0p2 ro rootfstype=ext4 rootwait fec_mac=00:14:2d:4d:45:57 consoleblank=0 no_console_suspend=1 console=tty1 console=ttymxc0,115200n8 mxc_hdmi.only_cea=1 video=mxcfb0:dev=hdmi,1920x1080M@60,if=RGB24 video=mxcfb1:off video=mxcfb2:off video=mxcfb3:off fbmem=32M
  19. [ 0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes)
  20. [ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
  21. [ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
  22. [ 0.000000] Memory: 698812K/1048576K available (8192K kernel code, 279K rwdata, 1928K rodata, 1024K init, 439K bss, 22084K reserved, 327680K cma-reserved, 0K highmem)
  23. [ 0.000000] Virtual kernel memory layout:
  24. [ 0.000000] vector : 0xffff0000 - 0xffff1000 ( 4 kB)
  25. [ 0.000000] fixmap : 0xffc00000 - 0xfff00000 (3072 kB)
  26. [ 0.000000] vmalloc : 0xc0800000 - 0xff800000 (1008 MB)
  27. [ 0.000000] lowmem : 0x80000000 - 0xc0000000 (1024 MB)
  28. [ 0.000000] pkmap : 0x7fe00000 - 0x80000000 ( 2 MB)
  29. [ 0.000000] modules : 0x7f000000 - 0x7fe00000 ( 14 MB)
  30. [ 0.000000] .text : 0x80008000 - 0x80900000 (9184 kB)
  31. [ 0.000000] .init : 0x80b00000 - 0x80c00000 (1024 kB)
  32. [ 0.000000] .data : 0x80c00000 - 0x80c45ee0 ( 280 kB)
  33. [ 0.000000] .bss : 0x80c45ee0 - 0x80cb3e0c ( 440 kB)
  34. [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
  35. [ 0.000000] Hierarchical RCU implementation.
  36. [ 0.000000] Build-time adjustment of leaf fanout to 32.
  37. [ 0.000000] NR_IRQS:16 nr_irqs:16 16
  38. [ 0.000000] L2C-310 errata 752271 769419 enabled
  39. [ 0.000000] L2C-310 enabling early BRESP for Cortex-A9
  40. [ 0.000000] L2C-310 full line of zeros enabled for Cortex-A9
  41. [ 0.000000] L2C-310 ID prefetch enabled, offset 16 lines
  42. [ 0.000000] L2C-310 dynamic clock gating enabled, standby mode enabled
  43. [ 0.000000] L2C-310 cache controller enabled, 16 ways, 1024 kB
  44. [ 0.000000] L2C-310: CACHE_ID 0x410000c7, AUX_CTRL 0x76470001
  45. [ 0.000000] Switching to timer-based delay loop, resolution 333ns
  46. [ 0.000007] sched_clock: 32 bits at 3000kHz, resolution 333ns, wraps every 715827882841ns
  47. [ 0.000024] clocksource: mxc_timer1: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 637086815595 ns
  48. [ 0.001507] Console: colour dummy device 80x30
  49. [ 0.002144] console [tty1] enabled
  50. [ 0.002174] Calibrating delay loop (skipped), value calculated using timer frequency.. 6.00 BogoMIPS (lpj=30000)
  51. [ 0.002216] pid_max: default: 32768 minimum: 301
  52. [ 0.002323] Mount-cache hash table entries: 2048 (order: 1, 8192 bytes)
  53. [ 0.002352] Mountpoint-cache hash table entries: 2048 (order: 1, 8192 bytes)
  54. [ 0.002952] CPU: Testing write buffer coherency: ok
  55. [ 0.003307] CPU0: thread -1, cpu 0, socket 0, mpidr 80000000
  56. [ 0.003384] Setting up static identity map for 0x10100000 - 0x10100058
  57. [ 0.005202] CPU1: thread -1, cpu 1, socket 0, mpidr 80000001
  58. [ 0.005959] CPU2: thread -1, cpu 2, socket 0, mpidr 80000002
  59. [ 0.006690] CPU3: thread -1, cpu 3, socket 0, mpidr 80000003
  60. [ 0.006785] Brought up 4 CPUs
  61. [ 0.006870] SMP: Total of 4 processors activated (24.00 BogoMIPS).
  62. [ 0.006893] CPU: All CPU(s) started in SVC mode.
  63. [ 0.007667] devtmpfs: initialized
  64. [ 0.021204] VFP support v0.3: implementor 41 architecture 3 part 30 variant 9 rev 4
  65. [ 0.021523] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns
  66. [ 0.021574] futex hash table entries: 1024 (order: 4, 65536 bytes)
  67. [ 0.038337] pinctrl core: initialized pinctrl subsystem
  68. [ 0.039418] NET: Registered protocol family 16
  69. [ 0.046755] DMA: preallocated 256 KiB pool for atomic coherent allocations
  70. [ 0.069594] cpuidle: using governor menu
  71. [ 0.069892] CPU identified as i.MX6Q, silicon rev 1.5
  72. [ 0.094048] hw-breakpoint: found 5 (+1 reserved) breakpoint and 1 watchpoint registers.
  73. [ 0.094097] hw-breakpoint: maximum watchpoint size is 4 bytes.
  74. [ 0.095111] imx6q-pinctrl 20e0000.iomuxc: initialized IMX pinctrl driver
  75. [ 0.096787] imx-gpc 20dc000.gpc: no fsl,ldo-bypass found!
  76. [ 0.096931] imx-gpc 20dc000.gpc: Registered imx-gpc
  77. [ 0.118047] usb_host_vbus: supplied by usb_host_vbus_hub
  78. [ 0.118525] vgaarb: loaded
  79. [ 0.119231] SCSI subsystem initialized
  80. [ 0.119438] libata version 3.00 loaded.
  81. [ 0.119708] usbcore: registered new interface driver usbfs
  82. [ 0.119791] usbcore: registered new interface driver hub
  83. [ 0.119892] usbcore: registered new device driver usb
  84. [ 0.120539] i2c-gpio i2c@0: using pins 80 (SDA) and 62 (SCL)
  85. [ 0.121386] i2c i2c-1: IMX I2C adapter registered
  86. [ 0.121423] i2c i2c-1: can't use DMA, using PIO instead.
  87. [ 0.130247] stmpe-i2c 2-0041: stmpe811 detected, chip id: 0x811
  88. [ 0.220525] i2c i2c-2: IMX I2C adapter registered
  89. [ 0.220563] i2c i2c-2: can't use DMA, using PIO instead.
  90. [ 0.221257] i2c i2c-3: IMX I2C adapter registered
  91. [ 0.221292] i2c i2c-3: can't use DMA, using PIO instead.
  92. [ 0.221448] Linux video capture interface: v2.00
  93. [ 0.221512] pps_core: LinuxPPS API ver. 1 registered
  94. [ 0.221536] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
  95. [ 0.221587] PTP clock support registered
  96. [ 0.249650] imx-ipuv3 2400000.ipu: IPU DMFC NORMAL mode: 1(0~1), 5B(4,5), 5F(6,7)
  97. [ 0.279648] imx-ipuv3 2800000.ipu: IPU DMFC NORMAL mode: 1(0~1), 5B(4,5), 5F(6,7)
  98. [ 0.280526] mxc_mipi_csi2 21dc000.mipi_csi: i.MX MIPI CSI2 driver probed ipu0 csi1
  99. [ 0.280573] mxc_mipi_csi2 21dc000.mipi_csi: i.MX MIPI CSI2 dphy version is 0x3130302a
  100. [ 0.280694] MIPI CSI2 driver module loaded
  101. [ 0.280877] Advanced Linux Sound Architecture Driver Initialized.
  102. [ 0.282601] clocksource: Switched to clocksource mxc_timer1
  103. [ 0.282733] VFS: Disk quotas dquot_6.6.0
  104. [ 0.282808] VFS: Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
  105. [ 0.292708] NET: Registered protocol family 2
  106. [ 0.293318] TCP established hash table entries: 8192 (order: 3, 32768 bytes)
  107. [ 0.293418] TCP bind hash table entries: 8192 (order: 4, 65536 bytes)
  108. [ 0.293563] TCP: Hash tables configured (established 8192 bind 8192)
  109. [ 0.293654] UDP hash table entries: 512 (order: 2, 16384 bytes)
  110. [ 0.293712] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
  111. [ 0.293890] NET: Registered protocol family 1
  112. [ 0.294316] RPC: Registered named UNIX socket transport module.
  113. [ 0.294346] RPC: Registered udp transport module.
  114. [ 0.294369] RPC: Registered tcp transport module.
  115. [ 0.294390] RPC: Registered tcp NFSv4.1 backchannel transport module.
  116. [ 0.294417] PCI: CLS 0 bytes, default 64
  117. [ 0.295141] hw perfevents: enabled with armv7_cortex_a9 PMU driver, 7 counters available
  118. [ 0.296729] Bus freq driver module loaded
  119. [ 0.298553] workingset: timestamp_bits=30 max_order=18 bucket_order=0
  120. [ 0.304841] NFS: Registering the id_resolver key type
  121. [ 0.304889] Key type id_resolver registered
  122. [ 0.304911] Key type id_legacy registered
  123. [ 0.304943] nfs4filelayout_init: NFSv4 File Layout Driver Registering...
  124. [ 0.305497] ntfs: driver 2.1.32 [Flags: R/W].
  125. [ 0.305828] fuse init (API version 7.26)
  126. [ 0.311703] io scheduler noop registered
  127. [ 0.311736] io scheduler deadline registered
  128. [ 0.311908] io scheduler cfq registered (default)
  129. [ 0.314082] OF: PCI: host bridge /soc/pcie@0x01000000 ranges:
  130. [ 0.314133] OF: PCI: IO 0x01f80000..0x01f8ffff -> 0x00000000
  131. [ 0.314166] OF: PCI: MEM 0x01000000..0x01efffff -> 0x01000000
  132. [ 0.642773] imx6q-pcie 1ffc000.pcie: phy link never came up
  133. [ 0.642810] imx6q-pcie 1ffc000.pcie: Link never came up
  134. [ 0.645893] imx6q-pcie 1ffc000.pcie: failed to initialize host
  135. [ 0.645977] imx6q-pcie: probe of 1ffc000.pcie failed with error -110
  136. [ 0.646968] backlight supply power not found, using dummy regulator
  137. [ 0.649843] 20e0000.hdmi_video supply HDMI not found, using dummy regulator
  138. [ 0.651316] mxc_hdmi 20e0000.hdmi_video: Detected HDMI controller 0x13:0xa:0xa0:0xc1
  139. [ 0.651373] fbcvt: 1920x1080@60: CVT Name - 2.073M9
  140. [ 0.651495] mxc_sdc_fb fb@0: registered mxc display driver hdmi
  141. [ 0.666819] mxc_sdc_fb fb@0: 1920x1080 h_sync,r,l: 44,88,148 v_sync,l,u: 5,4,36 pixclock=148500000 Hz
  142. [ 0.692678] imx-ipuv3 2400000.ipu: IPU DMFC DP HIGH RESOLUTION: 1(0,1), 5B(2~5), 5F(6,7)
  143. [ 0.726559] mxc_sdc_fb fb@0: 1920x1080 h_sync,r,l: 44,88,148 v_sync,l,u: 5,4,36 pixclock=148500000 Hz
  144. [ 0.774379] Console: switching to colour frame buffer device 240x67
  145. [ 0.809460] mxc_sdc_fb fb@1: mxcfb1 is turned off!
  146. [ 0.809611] mxc_sdc_fb fb@2: mxcfb2 is turned off!
  147. [ 0.809750] mxc_sdc_fb fb@3: mxcfb3 is turned off!
  148. [ 0.811540] imx-sdma 20ec000.sdma: no iram assigned, using external mem
  149. [ 0.812196] imx-sdma 20ec000.sdma: loaded firmware 3.3
  150. [ 0.816745] pfuze100-regulator 2-0008: Full layer: 2, Metal layer: 1
  151. [ 0.817575] pfuze100-regulator 2-0008: FAB: 0, FIN: 0
  152. [ 0.817675] pfuze100-regulator 2-0008: pfuze100 found.
  153. [ 0.835431] 2020000.serial: ttymxc0 at MMIO 0x2020000 (irq = 29, base_baud = 5000000) is a IMX
  154. [ 1.714966] console [ttymxc0] enabled
  155. [ 1.719600] 21e8000.serial: ttymxc1 at MMIO 0x21e8000 (irq = 78, base_baud = 5000000) is a IMX
  156. [ 1.728933] 21f0000.serial: ttymxc3 at MMIO 0x21f0000 (irq = 79, base_baud = 5000000) is a IMX
  157. [ 1.738236] 21f4000.serial: ttymxc4 at MMIO 0x21f4000 (irq = 80, base_baud = 5000000) is a IMX
  158. [ 1.747921] [drm] Initialized
  159. [ 1.751324] [drm] Initialized vivante 1.0.0 20120216 on minor 0
  160. [ 1.767074] brd: module loaded
  161. [ 1.776257] loop: module loaded
  162. [ 1.780620] ahci-imx 2200000.sata: fsl,transmit-level-mV not specified, using 00000024
  163. [ 1.788721] ahci-imx 2200000.sata: fsl,transmit-boost-mdB not specified, using 00000480
  164. [ 1.796884] ahci-imx 2200000.sata: fsl,transmit-atten-16ths not specified, using 00002000
  165. [ 1.805217] ahci-imx 2200000.sata: fsl,receive-eq-mdB not specified, using 05000000
  166. [ 1.816917] ahci-imx 2200000.sata: SSS flag set, parallel bus scan disabled
  167. [ 1.824059] ahci-imx 2200000.sata: AHCI 0001.0300 32 slots 1 ports 3 Gbps 0x1 impl platform mode
  168. [ 1.833021] ahci-imx 2200000.sata: flags: ncq sntf stag pm led clo only pmp pio slum part ccc apst
  169. [ 1.843542] scsi host0: ahci-imx
  170. [ 1.847115] ata1: SATA max UDMA/133 mmio [mem 0x02200000-0x02203fff] port 0x100 irq 87
  171. [ 1.857359] spi_imx 2008000.ecspi: probed
  172. [ 1.862168] libphy: Fixed MDIO Bus: probed
  173. [ 1.866739] vcan: Virtual CAN interface driver
  174. [ 1.871271] CAN device driver interface
  175. [ 1.875493] 2090000.flexcan supply xceiver not found, using dummy regulator
  176. [ 1.888131] flexcan 2090000.flexcan: device registered (reg_base=c0b24000, irq=38)
  177. [ 1.900850] 2094000.flexcan supply xceiver not found, using dummy regulator
  178. [ 1.913468] flexcan 2094000.flexcan: device registered (reg_base=c0b2c000, irq=39)
  179. [ 1.927161] 2188000.ethernet supply phy not found, using dummy regulator
  180. [ 1.950407] pps pps0: new PPS source ptp0
  181. [ 1.960774] libphy: fec_enet_mii_bus: probed
  182. [ 1.971722] fec 2188000.ethernet eth0: registered PHC device 0
  183. [ 1.982988] usbcore: registered new interface driver asix
  184. [ 1.993650] usbcore: registered new interface driver ax88179_178a
  185. [ 2.004974] usbcore: registered new interface driver cdc_ether
  186. [ 2.015867] usbcore: registered new interface driver net1080
  187. [ 2.026572] usbcore: registered new interface driver cdc_subset
  188. [ 2.037648] usbcore: registered new interface driver zaurus
  189. [ 2.048353] usbcore: registered new interface driver cdc_ncm
  190. [ 2.059078] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
  191. [ 2.070692] ehci-pci: EHCI PCI platform driver
  192. [ 2.080281] ehci-mxc: Freescale On-Chip EHCI Host driver
  193. [ 2.090752] usbcore: registered new interface driver usb-storage
  194. [ 2.102049] usbcore: registered new interface driver usbserial
  195. [ 2.112865] usbcore: registered new interface driver usbserial_generic
  196. [ 2.124302] usbserial: USB Serial support registered for generic
  197. [ 2.135197] usbcore: registered new interface driver ftdi_sio
  198. [ 2.145785] usbserial: USB Serial support registered for FTDI USB Serial Device
  199. [ 2.157988] usbcore: registered new interface driver pl2303
  200. [ 2.168469] usbserial: USB Serial support registered for pl2303
  201. [ 2.180451] 2184800.usbmisc supply vbus-wakeup not found, using dummy regulator
  202. [ 2.184085] ata1: SATA link down (SStatus 0 SControl 300)
  203. [ 2.184124] ahci-imx 2200000.sata: no device found, disabling link.
  204. [ 2.184130] ahci-imx 2200000.sata: pass ahci_imx..hotplug=1 to enable hotplug
  205. [ 2.237746] ci_hdrc ci_hdrc.1: EHCI Host Controller
  206. [ 2.247370] ci_hdrc ci_hdrc.1: new USB bus registered, assigned bus number 1
  207. [ 2.282637] ci_hdrc ci_hdrc.1: USB 2.0 started, EHCI 1.00
  208. [ 2.293575] hub 1-0:1.0: USB hub found
  209. [ 2.302121] hub 1-0:1.0: 1 port detected
  210. [ 2.311747] mousedev: PS/2 mouse device common for all mice
  211. [ 2.332785] input: stmpe-ts as /devices/soc0/soc/2100000.aips-bus/21a4000.i2c/i2c-2/2-0041/stmpe-ts/input/input0
  212. [ 2.353191] rtc-ds1307 1-0068: rtc core: registered m41t0 as rtc0
  213. [ 2.364989] snvs_rtc 20cc000.snvs:snvs-rtc-lp: rtc core: registered 20cc000.snvs:snvs-r as rtc1
  214. [ 2.379036] i2c /dev entries driver
  215. [ 2.388937] mxc_v4l2_output v4l2_out: V4L2 device registered as video16
  216. [ 2.400876] mxc_v4l2_output v4l2_out: V4L2 device registered as video17
  217. [ 2.413987] imx2-wdt 20bc000.wdog: timeout 60 sec (nowayout=0)
  218. [ 2.425557] sdhci: Secure Digital Host Controller Interface driver
  219. [ 2.436912] sdhci: Copyright(c) Pierre Ossman
  220. [ 2.446366] sdhci-pltfm: SDHCI platform and OF driver helper
  221. [ 2.458105] sdhci-esdhc-imx 2190000.usdhc: could not get ultra high speed state, work on normal mode
  222. [ 2.472359] sdhci-esdhc-imx 2190000.usdhc: Got CD GPIO
  223. [ 2.542749] mmc1: SDHCI controller on 2190000.usdhc [2190000.usdhc] using ADMA
  224. [ 2.557904] sdhci-esdhc-imx 2198000.usdhc: could not get ultra high speed state, work on normal mode
  225. [ 2.632631] mmc0: SDHCI controller on 2198000.usdhc [2198000.usdhc] using ADMA
  226. [ 2.646348] mxc_vpu 2040000.vpu_fsl: VPU initialized
  227. [ 2.657286] mxc_vdoa 21e4000.vdoa: i.MX Video Data Order Adapter(VDOA) driver probed
  228. [ 2.672520] usb 1-1: new high-speed USB device number 2 using ci_hdrc
  229. [ 2.686150] caam 2100000.caam: ERA source: CAAMVID.
  230. [ 2.696474] caam 2100000.caam: AXI pipeline throttling enabled.
  231. [ 2.708568] caam 2100000.caam: Entropy delay = 3200
  232. [ 2.774339] random: fast init done
  233. [ 2.779341] caam 2100000.caam: Instantiated RNG4 SH0
  234. [ 2.794904] mmc0: new DDR MMC card at address 0001
  235. [ 2.805354] mmcblk0: mmc0:0001 004GE0 3.69 GiB
  236. [ 2.815222] mmcblk0boot0: mmc0:0001 004GE0 partition 1 2.00 MiB
  237. [ 2.826507] mmcblk0boot1: mmc0:0001 004GE0 partition 2 2.00 MiB
  238. [ 2.840104] caam 2100000.caam: Instantiated RNG4 SH1
  239. [ 2.850038] caam 2100000.caam: device ID = 0x0a16010000000000 (Era 4)
  240. [ 2.850992] mmcblk0: p1 p2
  241. [ 2.869082] caam 2100000.caam: job rings = 2, qi = 0
  242. [ 2.873833] hub 1-1:1.0: USB hub found
  243. [ 2.873912] hub 1-1:1.0: 4 ports detected
  244. [ 2.901790] caam algorithms registered in /proc/crypto
  245. [ 2.915490] caam_jr 2101000.jr0: registering rng-caam
  246. [ 2.926298] snvs-secvio 20cc000.caam-snvs: can't get snvs clock
  247. [ 2.937225] snvs-secvio 20cc000.caam-snvs: violation handlers armed - non-secure state
  248. [ 2.950403] hidraw: raw HID events driver (C) Jiri Kosina
  249. [ 2.961024] usbcore: registered new interface driver usbhid
  250. [ 2.971682] usbhid: USB HID core driver
  251. [ 2.987108] stmpe-adc stmpe-adc: Initialized
  252. [ 2.998972] sgtl5000 2-000a: sgtl5000 revision 0x11
  253. [ 3.037749] fsl-ssi-dai 2028000.ssi: No cache defaults, reading back from HW
  254. [ 3.181011] imx-sgtl5000 sound: sgtl5000 <-> 2028000.ssi mapping ok
  255. [ 3.195041] imx-spdif sound-spdif: snd-soc-dummy-dai <-> 2004000.spdif mapping ok
  256. [ 3.210702] imx-audio-hdmi sound-hdmi: hdmi-hifi.0 <-> soc:hdmi_audio@00120000 mapping ok
  257. [ 3.225503] NET: Registered protocol family 10
  258. [ 3.236177] NET: Registered protocol family 17
  259. [ 3.245918] can: controller area network core (rev 20120528 abi 9)
  260. [ 3.257506] NET: Registered protocol family 29
  261. [ 3.267175] can: raw protocol (rev 20120528)
  262. [ 3.276623] can: broadcast manager protocol (rev 20161123 t)
  263. [ 3.287458] can: netlink gateway (rev 20130117) max_hops=1
  264. [ 3.298403] Key type dns_resolver registered
  265. [ 3.309900] cpu cpu0: Registered imx6q-cpufreq
  266. [ 3.319550] Registering SWP/SWPB emulation handler
  267. [ 3.343713] imx_thermal 2000000.aips-bus:tempmon: Extended Commercial CPU temperature grade - max:105C critical:100C passive:95C
  268. [ 3.360598] input: gpio-keys as /devices/soc0/gpio-keys/input/input1
  269. [ 3.372937] rtc-ds1307 1-0068: setting system clock to 2018-12-18 19:08:40 UTC (1545160120)
  270. [ 3.386160] usb_otg_vbus: disabling
  271. [ 3.393996] ALSA device list:
  272. [ 3.401188] #0: imx6q-apalis-sgtl5000
  273. [ 3.409193] #1: imx-spdif
  274. [ 3.416065] #2: imx-hdmi-soc
  275. [ 3.435747] EXT4-fs (mmcblk0p2): mounted filesystem with ordered data mode. Opts: (null)
  276. [ 3.448009] VFS: Mounted root (ext4 filesystem) readonly on device 179:2.
  277. [ 3.460753] devtmpfs: mounted
  278. [ 3.468650] Freeing unused kernel memory: 1024K
  279. [ 3.621247] systemd[1]: systemd 234 running in system mode. (+PAM -AUDIT -SELINUX +IMA -APPARMOR +SMACK +SYSVINIT +UTMP -LIBCRYPTSETUP -GCRYPT -GNUTLS -ACL +XZ +LZ4 -SECCOMP +BLKID -ELFUTILS +KMOD -IDN2 +IDN default-hierarchy=hybrid)
  280. [ 3.654104] systemd[1]: Detected architecture arm.
  281. [ 3.693477] systemd[1]: Set hostname to <apalis-imx6>.
  282. [ 3.920509] systemd[1]: Started Forward Password Requests to Wall Directory Watch.
  283. [ 3.962999] systemd[1]: Listening on Journal Socket.
  284. [ 4.002986] systemd[1]: Started Dispatch Password Requests to Console Directory Watch.
  285. [ 4.042788] systemd[1]: Reached target Paths.
  286. [ 4.082860] systemd[1]: Listening on udev Kernel Socket.
  287. [ 4.141345] systemd[1]: Created slice System Slice.
  288. [ 4.183347] systemd[1]: Created slice system-getty.slice.
  289. [ 4.422514] galcore: loading out-of-tree module taints kernel.
  290. [ 4.438654] Galcore version 6.2.2.93313
  291. [ 4.812320] EXT4-fs (mmcblk0p2): re-mounted. Opts: (null)
  292. [ 5.069051] systemd-journald[226]: Received request to flush runtime journal from PID 1
  293. [ 5.596714] adv7280 3-0021: chip found @ 0x42 (21a8000.i2c)
  294. [ 5.613026] adv7280 3-0021: no sensor pwdn pin available
  295. [ 5.663116] adv7280 3-0021: adv7280_probe:Analog Device adv7280 not detected -6!
  296. [ 5.714594] max9526 3-0020: Device seems not to be a MAX9526
  297. [ 5.727675] ov564x_mipi 3-003c: found pwm2, period=0
  298. [ 6.122728] mxc_v4l2_master_attach: ipu0:/csi1 parallel attached ov564x_mipi:mxc_v4l2_cap1
  299. [ 6.136507] camera ov5640_mipi is found
  300. [ 6.278904] ERROR: v4l2 capture: slave not found! V4L2_CID_HUE
  301. [ 6.912952] using random self ethernet address
  302. [ 6.921930] using random host ethernet address
  303. [ 6.989790] ov5640_set_virtual_channel: virtual channel=1
  304. [ 7.128276] Loading modules backported from Linux version v4.18-0-g94710cac0ef4
  305. [ 7.140257] Backport generated by backports.git v4.14-rc2-1-80-g0795d050
  306. [ 7.170116] Bluetooth: Core ver 2.22
  307. [ 7.178725] NET: Registered protocol family 31
  308. [ 7.187687] Bluetooth: HCI device and connection manager initialized
  309. [ 7.200462] Bluetooth: HCI socket layer initialized
  310. [ 7.210403] Bluetooth: L2CAP socket layer initialized
  311. [ 7.210442] Bluetooth: SCO socket layer initialized
  312. [ 7.294269] Micrel KSZ9031 Gigabit PHY 2188000.ethernet-1:07: attached PHY driver [Micrel KSZ9031 Gigabit PHY] (mii_bus:phy_addr=2188000.ethernet-1:07, irq=120)
  313. [ 7.313499] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
  314. [ 7.368178] usb0: HOST MAC 00:14:2d:ff:ff:fe
  315. [ 7.379081] usb0: MAC 00:14:2d:ff:ff:ff
  316. [ 7.639713] IPv6: ADDRCONF(NETDEV_UP): usb0: link is not ready
  317. [ 8.238314] mxc_sdc_fb fb@0: 1920x1080 h_sync,r,l: 44,88,148 v_sync,l,u: 5,4,36 pixclock=148500000 Hz
  318. [ 8.301505] mxc_sdc_fb fb@0: 1920x1080 h_sync,r,l: 44,88,148 v_sync,l,u: 5,4,36 pixclock=148500000 Hz
  319. [ 8.356812] mxc_sdc_fb fb@0: 1920x1080 h_sync,r,l: 44,88,148 v_sync,l,u: 5,4,36 pixclock=148500000 Hz
  320. [ 8.417483] mxc_sdc_fb fb@0: 1920x1080 h_sync,r,l: 44,88,148 v_sync,l,u: 5,4,36 pixclock=148500000 Hz
  321. [ 9.167486] fec 2188000.ethernet eth0: Link is Up - 100Mbps/Half - flow control off
  322. [ 9.176690] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
  323. [ 9.426006] mxc_sdc_fb fb@0: 1920x1080 h_sync,r,l: 44,88,148 v_sync,l,u: 5,4,36 pixclock=148500000 Hz
Add Comment
Please, Sign In to add comment
Public Pastes
We use cookies for various purposes including analytics. By continuing to use Pastebin, you agree to our use of cookies as described in the Cookies Policy.  OK, I Understand
Not a member of Pastebin yet?
Sign Up, it unlocks many cool features!