OPNSense dmesg on HP Thinclient T610

Copyright (c) 1992-2017 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
        The Regents of the University of California. All rights reserved.
FreeBSD is a registered trademark of The FreeBSD Foundation.
FreeBSD 11.1-RELEASE-p9  e86703e30(stable/18.1) amd64
FreeBSD clang version 4.0.0 (tags/RELEASE_400/final 297347) (based on LLVM 4.0.0)
VT(efifb): resolution 800x600
[HBSD LOG] logging to system: enabled
[HBSD LOG] logging to user: disabled
[HBSD HARDENING] procfs hardening: enabled
[HBSD ASLR] status: opt-out
[HBSD ASLR] mmap: 30 bit
[HBSD ASLR] exec base: 30 bit
[HBSD ASLR] stack: 42 bit
[HBSD ASLR] vdso: 28 bit
[HBSD ASLR] map32bit: 18 bit
[HBSD ASLR] disallow MAP_32BIT mode mmap: opt-in
[HBSD ASLR (compat)] status: opt-out
[HBSD ASLR (compat)] mmap: 14 bit
[HBSD ASLR (compat)] exec base: 14 bit
[HBSD ASLR (compat)] stack: 14 bit
[HBSD ASLR (compat)] vdso: 8 bit
[HBSD SEGVGUARD] status: opt-out
[HBSD SEGVGUARD] expiry: 120 sec
[HBSD SEGVGUARD] suspension: 600 sec
[HBSD SEGVGUARD] maxcrashes: 5
CPU: AMD G-T56N Processor (1646.53-MHz K8-class CPU)
  Origin="AuthenticAMD"  Id=0x500f20  Family=0x14  Model=0x2  Stepping=0
  Features=0x178bfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,MMX,FXSR,SSE,SSE2,HTT>
  Features2=0x802209<SSE3,MON,SSSE3,CX16,POPCNT>
  AMD Features=0x2e500800<SYSCALL,NX,MMX+,FFXSR,Page1GB,RDTSCP,LM>
  AMD Features2=0x35ff<LAHF,CMP,SVM,ExtAPIC,CR8,ABM,SSE4A,MAS,Prefetch,IBS,SKINIT,WDT>
  SVM: NP,NRIP,NAsids=8
  TSC: P-state invariant, performance statistics
real memory  = 4294967296 (4096 MB)
avail memory = 3522605056 (3359 MB)
Event timer "LAPIC" quality 100
ACPI APIC Table: <HPQOEM SLIC-BPC>
random: unblocking device.
ACPI BIOS Warning (bug): Optional FADT field Pm2ControlBlock has valid Length but zero Address: 0x0000000000000000/0x1 (20170303/tbfadt-796)
ioapic0 <Version 2.1> irqs 0-23 on motherboard
Timecounter "TSC" frequency 1646529318 Hz quality 1000
taskqgroup_adjust failed cnt: 1 stride: 1 mp_ncpus: 1 smp_started: 0
taskqgroup_adjust failed cnt: 1 stride: 1 mp_ncpus: 1 smp_started: 0
random: entropy device external interface
wlan: mac acl policy registered
netmap: loaded module
module_register_init: MOD_LOAD (vesa, 0xffffffff810ab110, 0) error 19
kbd1 at kbdmux0
nexus0
cryptosoft0: <software crypto> on motherboard
acpi0: <HPQOEM SLIC-BPC> on motherboard
acpi0: Power Button (fixed)
cpu0: <ACPI CPU> on acpi0
attimer0: <AT timer> port 0x40-0x43 irq 0 on acpi0
Timecounter "i8254" frequency 1193182 Hz quality 0
Event timer "i8254" frequency 1193182 Hz quality 100
atrtc0: <AT realtime clock> port 0x70-0x71 irq 8 on acpi0
Event timer "RTC" frequency 32768 Hz quality 0
hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff on acpi0
Timecounter "HPET" frequency 14318180 Hz quality 950
Event timer "HPET" frequency 14318180 Hz quality 550
Event timer "HPET1" frequency 14318180 Hz quality 450
Event timer "HPET2" frequency 14318180 Hz quality 450
Timecounter "ACPI-fast" frequency 3579545 Hz quality 900
acpi_timer0: <32-bit timer at 3.579545MHz> port 0x808-0x80b on acpi0
pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
pci0: <ACPI PCI bus> on pcib0
vgapci0: <VGA-compatible display> port 0xf000-0xf0ff mem 0xc0000000-0xcfffffff,0xfea00000-0xfea3ffff irq 18 at device 1.0 on pci0
vgapci0: Boot video device
hdac0: <ATI (0x1314) HDA Controller> mem 0xfea44000-0xfea47fff irq 19 at device 1.1 on pci0
pcib1: <ACPI PCI-PCI bridge> irq 16 at device 4.0 on pci0
pci1: <ACPI PCI bus> on pcib1
pcib2: <PCI-PCI bridge> at device 0.0 on pci1
pci2: <PCI bus> on pcib2
pcib3: <PCI-PCI bridge> at device 2.0 on pci2
pci3: <PCI bus> on pcib3
igb0: <Intel(R) PRO/1000 Network Connection, Version - 2.5.3-k> port 0xe020-0xe03f mem 0xfe620000-0xfe63ffff,0xfe400000-0xfe5fffff,0xfe644000-0xfe647fff irq 18 at device 0.0 on pci3
igb0: Using MSIX interrupts with 2 vectors
igb0: Ethernet address: 00:1b:21:4c:16:08
igb0: netmap queues/slots: TX 1/1024, RX 1/1024
igb1: <Intel(R) PRO/1000 Network Connection, Version - 2.5.3-k> port 0xe000-0xe01f mem 0xfe600000-0xfe61ffff,0xfe200000-0xfe3fffff,0xfe640000-0xfe643fff irq 19 at device 0.1 on pci3
igb1: Using MSIX interrupts with 2 vectors
igb1: Ethernet address: 00:1b:21:4c:16:09
igb1: netmap queues/slots: TX 1/1024, RX 1/1024
pcib4: <PCI-PCI bridge> at device 4.0 on pci2
pci4: <PCI bus> on pcib4
igb2: <Intel(R) PRO/1000 Network Connection, Version - 2.5.3-k> port 0xd020-0xd03f mem 0xfe020000-0xfe03ffff,0xfde00000-0xfdffffff,0xfe044000-0xfe047fff irq 16 at device 0.0 on pci4
igb2: Using MSIX interrupts with 2 vectors
igb2: Ethernet address: 00:1b:21:4c:16:0c
igb2: netmap queues/slots: TX 1/1024, RX 1/1024
igb3: <Intel(R) PRO/1000 Network Connection, Version - 2.5.3-k> port 0xd000-0xd01f mem 0xfe000000-0xfe01ffff,0xfdc00000-0xfddfffff,0xfe040000-0xfe043fff irq 17 at device 0.1 on pci4
igb3: Using MSIX interrupts with 2 vectors
igb3: Ethernet address: 00:1b:21:4c:16:0d
igb3: netmap queues/slots: TX 1/1024, RX 1/1024
ahci0: <AMD SB7x0/SB8x0/SB9x0 AHCI SATA controller> port 0xf140-0xf147,0xf130-0xf133,0xf120-0xf127,0xf110-0xf113,0xf100-0xf10f mem 0xfea4a000-0xfea4a3ff irq 19 at device 17.0 on pci0
ahci0: AHCI v1.20 with 3 6Gbps ports, Port Multiplier supported
ahci0: quirks=0x22000<ATI_PMP_BUG,1MSI>
ahcich0: <AHCI channel> at channel 0 on ahci0
ahcich1: <AHCI channel> at channel 1 on ahci0
ahcich2: <AHCI channel> at channel 2 on ahci0
ohci0: <AMD SB7x0/SB8x0/SB9x0 USB controller> mem 0xfea49000-0xfea49fff irq 18 at device 18.0 on pci0
usbus0 on ohci0
ehci0: <AMD SB7x0/SB8x0/SB9x0 USB 2.0 controller> mem 0xfea48000-0xfea480ff irq 17 at device 18.2 on pci0
usbus1: EHCI version 1.0
usbus1 on ehci0
hdac1: <ATI SB600 HDA Controller> mem 0xfea40000-0xfea43fff irq 16 at device 20.2 on pci0
isab0: <PCI-ISA bridge> at device 20.3 on pci0
isa0: <ISA bus> on isab0
pcib5: <ACPI PCI-PCI bridge> at device 20.4 on pci0
pci5: <ACPI PCI bus> on pcib5
pcib6: <ACPI PCI-PCI bridge> at device 21.0 on pci0
pci6: <ACPI PCI bus> on pcib6
pcib7: <ACPI PCI-PCI bridge> at device 21.1 on pci0
pci7: <ACPI PCI bus> on pcib7
pci7: <network> at device 0.0 (no driver attached)
pcib8: <ACPI PCI-PCI bridge> at device 21.2 on pci0
pci8: <ACPI PCI bus> on pcib8
bge0: <Broadcom BCM57765 B0, ASIC rev. 0x57785100> mem 0xd0010000-0xd001ffff,0xd0000000-0xd000ffff irq 18 at device 0.0 on pci8
bge0: CHIP ID 0x57785100; ASIC REV 0x57785; CHIP REV 0x577851; PCI-E
miibus0: <MII bus> on bge0
brgphy0: <BCM57765 1000BASE-T media interface> PHY 1 on miibus0
brgphy0:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-master, 1000baseT-FDX, 1000baseT-FDX-master, auto, auto-flow
bge0: Using defaults for TSO: 65518/35/2048
bge0: Ethernet address: c8:cb:b8:13:1a:79
pcib9: <ACPI PCI-PCI bridge> at device 21.3 on pci0
pci9: <ACPI PCI bus> on pcib9
xhci0: <XHCI (generic) USB 3.0 controller> mem 0xfe700000-0xfe70ffff,0xfe710000-0xfe711fff irq 19 at device 0.0 on pci9
xhci0: 64 bytes context size, 64-bit DMA
usbus2 on xhci0
acpi_button0: <Power Button> on acpi0
atkbdc0: <Keyboard controller (i8042)> port 0x60,0x64 irq 1 on acpi0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
kbd0 at atkbd0
atkbd0: [GIANT-LOCKED]
uart0: <16550 or compatible> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0
uart1: <16550 or compatible> port 0x2f8-0x2ff irq 3 on acpi0
ppc0: <Parallel port> port 0x378-0x37f,0x778-0x77f irq 7 drq 1 on acpi0
ppc0: SMC-like chipset (ECP/EPP/PS2/NIBBLE) in COMPATIBLE mode
ppc0: FIFO with 16/16/8 bytes threshold
ppbus0: <Parallel port bus> on ppc0
lpt0: <Printer> on ppbus0
lpt0: Interrupt-driven port
ppi0: <Parallel I/O> on ppbus0
hwpstate0: <Cool`n'Quiet 2.0> on cpu0
Timecounters tick every 1.000 msec
nvme cam probe device init
hdacc0: <ATI R6xx HDA CODEC> at cad 0 on hdac0
hdaa0: <ATI R6xx Audio Function Group> at nid 1 on hdacc0
pcm0: <ATI R6xx (HDMI)> at nid 3 on hdaa0
hdacc1: <Realtek ALC269 HDA CODEC> at cad 0 on hdac1
hdaa1: <Realtek ALC269 Audio Function Group> at nid 1 on hdacc1
pcm1: <Realtek ALC269 (Analog 2.0+HP/2.0)> at nid 20,21 and 24 on hdaa1
usbus0: 12Mbps Full Speed USB v1.0
usbus1: 480Mbps High Speed USB v2.0
usbus2: 5.0Gbps Super Speed USB v3.0
ugen0.1: <ATI OHCI root HUB> at usbus0
uhub0: <ATI OHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus0
ugen1.1: <ATI EHCI root HUB> at usbus1
uhub1: <ATI EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus1
ugen2.1: <0x104c XHCI root HUB> at usbus2
uhub2: <0x104c XHCI root HUB, class 9/0, rev 3.00/1.00, addr 1> on usbus2
ada0 at ahcich1 bus 0 scbus1 target 0 lun 0
ada0: <16GB SATA Flash Drive SFDDA01A> ATA8-ACS SATA 2.x device
ada0: Serial Number B0114017100700000207
ada0: 300.000MB/s transfers (SATA 2.x, PIO4, PIO 8192bytes)
uhub0: 5 ports with 5 removable, self powered
ada0: Command Queueing enabled
ada0: 15272MB (31277232 512 byte sectors)
ada1 at ahcich2 bus 0 scbus2 target 0 lun 0
ada1: <HTS541080G9SA00 MB4IC65R> ATA-7 SATA 1.x device
ada1: Serial Number MPBDPAXNHUNJ8G
ada1: 150.000MB/s transfers (SATA 1.x, PIO4, PIO 8192bytes)
ada1: 76319MB (156301488 512 byte sectors)
Trying to mount root from ufs:/dev/gpt/rootfs [rw]...
uhub2: 4 ports with 4 removable, self powered
uhub1: 5 ports with 5 removable, self powered
ugen0.2: <DELL Dell QuietKey Keyboard> at usbus0
ukbd0 on uhub0
ukbd0: <DELL Dell QuietKey Keyboard, class 0/0, rev 1.10/1.01, addr 2> on usbus0
kbd2 at ukbd0
ugen0.3: <vendor 0x04b3 USB Optical Mouse> at usbus0
ugen0.4: <Broadcom Corp BCM20702A0> at usbus0
ums0 on uhub0
ums0: <vendor 0x04b3 USB Optical Mouse, class 0/0, rev 2.00/2.00, addr 3> on usbus0
ums0: 3 buttons and [XYZ] coordinates ID=0
ubt0 on uhub0
ubt0: <Broadcom Corp BCM20702A0, rev 2.00/1.12, addr 4> on usbus0
WARNING: attempt to domain_add(bluetooth) after domainfinalize()
aesni0: No AESNI support.
bge0: link state changed to DOWN
bge0: link state changed to UP
pflog0: promiscuous mode enabled