API tools faq
paste
Guest User

Untitled

a guest
Nov 4th, 2025
8
0
27 days
Add comment
Not a member of Pastebin yet? Sign Up, it unlocks many cool features!
text 22.55 KB | Software | 0 0
raw download clone embed print report
  1. 1.15 RPi: BOOTSYS release VERSION:790da7ef DATE: 2024/07/30 TIME: 15:25:46
  2. 1.19 BOOTMODE: 0x06 partition 0 build-ts BUILD_TIMESTAMP=1722349546 serial 07f3d326 boardrev d04170 stc 1019856
  3. 1.29 AON_RESET: 00000003 PM_RSTS 00001000
  4. 1.37 RP1_BOOT chip ID: 0x20001927
  5. 1.40 PM_RSTS: 0x00001000
  6. 1.40 part 00000000 reset_info 00000000
  7. 1.43 PMIC reset-event 00000000 rtc 00000001 alarm 00000000 enabled 0
  8. 1.50 uSD voltage 3.3V
  9. 1.69 Initialising SDRAM 'Micron' 32Gb x2 total-size: 64 Gbit 4267
  10. 1.72 DDR 4267 1 0 64 152
  11. 3.97 OTP boardrev d04170 bootrom a a
  12. 3.98 Customer key hash 0000000000000000000000000000000000000000000000000000000000000000
  13. 3.06 VC-JTAG unlocked
  14. 3.28 RP1_BOOT chip ID: 0x20001927
  15.  
  16. 3.32 RP1_BOOT chip ID: 0x20001927
  17. 3.32 RP1_BOOT: fw size 25992
  18. 4.87 PCI2 init
  19. 4.87 PCI2 reset
  20. 4.32 PCIe scan 00001de4:00000001
  21. 4.33 RP1_CHIP_INFO 20001927
  22.  
  23. 4.35 RPi: BOOTLOADER release VERSION:790da7ef DATE: 2024/07/30 TIME: 15:25:46
  24. 4.42 BOOTMODE: 0x06 partition 0 build-ts BUILD_TIMESTAMP=1722349546 serial 07f3d326 boardrev d04170 stc 4142951
  25. 4.52 AON_RESET: 00000003 PM_RSTS 00001000
  26. 4.56 PCIEx1: PWR 0 DET_WAKE 0
  27. 4.59 M.2 PCIe HAT not detected.
  28. 4.83 usb_pd_init status 3
  29. 4.83 USB_PD CONFIG 0 41
  30. 4.90 XHCI-STOP
  31. 4.90 xHC0 ver: 272 HCS: 03000440 140000f1 07ff000a HCC: 0240fe6d
  32. 4.95 USBSTS 11
  33. 4.97 xHC0 ver: 272 HCS: 03000440 140000f1 07ff000a HCC: 0240fe6d
  34. 4.02 xHC0 ports 3 slots 64 intrs 4
  35. 4.14 XHCI-STOP
  36. 4.14 xHC1 ver: 272 HCS: 03000440 140000f1 07ff000a HCC: 0240fe6d
  37. 4.19 USBSTS 11
  38. 4.21 xHC1 ver: 272 HCS: 03000440 140000f1 07ff000a HCC: 0240fe6d
  39. 4.31 xHC1 ports 3 slots 64 intrs 4
  40. 4.38 USB-PD: src-cap PDO object1 0x0801912c
  41. 4.39 Current 3000 mA
  42. 4.41 Voltage 5000 mV
  43. 4.43 USB-PD: src-cap PDO object2 0x0002d12c
  44. 4.48 Current 3000 mA
  45. 4.50 Voltage 9000 mV
  46. 4.52 USB-PD: src-cap PDO object3 0x0004b12c
  47. 4.56 Current 3000 mA
  48. 4.58 Voltage 15000 mV
  49. 4.60 USB-PD: src-cap PDO object4 0x0006412c
  50. 4.64 Current 3000 mA
  51. 4.66 Voltage 20000 mV
  52. 4.68 USB-PD: src-cap PDO object5 0xc1a4323c
  53. 4.73 Boot mode: SD (01) order f4
  54. 4.76 USB3[3] 002a1203 connected enabled
  55. 4.77 USB3 root HUB port 3 init
  56. 4.80 USB2[1] 00020ae1 connected
  57. 4.02 DEV [01:00] 3.32 000000:03 class 0 VID 0b95 PID 1790
  58. 4.33 USB2[1] 00200a03 connected enabled
  59. 4.34 USB2 root HUB port 1 init
  60. 4.52 DEV [01:00] 1.16 000000:01 class 0 VID 413c PID 2003
  61. 4.65 HID [01:00] 1.16 000000:01 register HID
  62. 4.12 SD HOST: 200000000 CTL0: 0x00800000 BUS: 400000 Hz actual: 390625 HZ div: 512 (256) status: 0x1fff0000 delay: 276
  63. 4.23 SD HOST: 200000000 CTL0: 0x00800f00 BUS: 400000 Hz actual: 390625 HZ div: 512 (256) status: 0x1fff0000 delay: 276
  64. 5.01 OCR c0ff8000 [423]
  65. CID: 00035344534b32353680e7ab100d018c
  66. CSD: 400e00325b590007725f7f800a404000
  67. 5.08 SD: bus-width: 4 spec: 2 SCR: 0x02458043 0x00000000
  68. 5.17 SD HOST: 200000000 CTL0: 0x00800f04 BUS: 50000000 Hz actual: 50000000 HZ div: 4 (2) status: 0x1fff0000 delay: 2
  69. 5.27 MBR: 0x00000800, 102400 type: 0x0c
  70. 5.29 MBR: 0x00019800,499640320 type: 0xa5
  71. 5.33 MBR: 0x00000000, 0 type: 0x00
  72. 5.36 MBR: 0x00000000, 0 type: 0x00
  73. 5.40 Trying partition: 0
  74. 5.43 type: 16 lba: 2048 'BSD4.4 ' ' ^ ' clusters 12783 (8)
  75. 5.49 rsc 1 fat-sectors 50 root dir cluster 1 sectors 32 entries 512
  76. Loading kernel...
  77. /boot/kernel/kernel text=0x318 text=0x7dfef8 text=0x222cf0 data=0x125ff0 data=0x0+0x36e000 0x8+0x11e8a8+0x8+0x14da5a-
  78. Loading configured modules...
  79. /boot/entropy size=0x1000
  80. /etc/hostid size=0x25
  81. /boot/kernel/umodem.ko text=0x20c0 text=0x1538 data=0x708+0x4 0x8+0xed0+0x8+0xaf4
  82. loading required module 'ucom'
  83. /boot/kernel/ucom.ko text=0x263d text=0x31b8 data=0x988+0x858 0x8+0x12c0+0x8+0xbc8
  84.  
  85. Hit [Enter] to boot immediately, or any other key for command prompt.
  86. Booting [/boot/kernel/kernel]...
  87. Using DTB provided by EFI at 0x3e6ef000.
  88. ---<<BOOT>>---
  89. GDB: no debug ports present
  90. KDB: debugger backends: ddb
  91. KDB: current backend: ddb
  92. WARNING: Cannot find freebsd,dts-version property, cannot check DTB compliance
  93. Type Physical Virtual #Pages Attr
  94. Reserved 000000000000 000000000000 00000080 WB
  95. ConventionalMemory 000000080000 000000080000 000364df WB
  96. LoaderCode 00003655f000 00003655f000 00004000 WB
  97. LoaderData 00003a55f000 00003a55f000 00004000 WB
  98. LoaderCode 00003e55f000 00003e55f000 000000d1 WB
  99. BootServicesData 00003e630000 00003e630000 00000003 WB
  100. ConventionalMemory 00003e633000 00003e633000 000000bb WB
  101. LoaderData 00003e6ee000 00003e6ee000 00000001 WB
  102. ACPIReclaimMemory 00003e6ef000 00003e6ef000 00000016 WB
  103. BootServicesData 00003e705000 00003e705000 00000001 WB
  104. RuntimeServicesData 00003e706000 00003e706000 00000001 WB RUNTIME
  105. BootServicesData 00003e707000 00003e707000 00000001 WB
  106. RuntimeServicesData 00003e708000 00003e708000 00000022 WB RUNTIME
  107. BootServicesData 00003e72a000 00003e72a000 00000009 WB
  108. BootServicesCode 00003e733000 00003e733000 00001019 WB
  109. RuntimeServicesData 00003f74c000 00003f74c000 00000001 WB RUNTIME
  110. BootServicesCode 00003f74d000 00003f74d000 000003f3 WB
  111. RuntimeServicesCode 00003fb40000 00003fb40000 00000010 WB RUNTIME
  112. BootServicesCode 00003fb50000 00003fb50000 000000b0 WB
  113. Reserved 00003fd16000 00003fd16000 00000001 WB
  114. BootServicesData 000040000000 000040000000 001c0000 WB
  115. MemoryMappedIO 00107d200000 00107d200000 00000001 RUNTIME
  116. Physical memory chunk(s):
  117. 0x00080000 - 0x3fbfffff, 1019 MB ( 260992 pages)
  118. 0x40000000 - 0x1ffffffff, 7168 MB (1835008 pages)
  119. Excluded memory regions:
  120. 0x00000000 - 0x0007ffff, 0 MB ( 128 pages) NoAlloc NoDump
  121. 0x36600000 - 0x377cefff, 17 MB ( 4559 pages) NoAlloc
  122. 0x3e6ef000 - 0x3e704fff, 0 MB ( 22 pages) NoAlloc
  123. 0x3e706000 - 0x3e706fff, 0 MB ( 1 pages) NoAlloc
  124. 0x3e708000 - 0x3e729fff, 0 MB ( 34 pages) NoAlloc
  125. 0x3f74c000 - 0x3f74cfff, 0 MB ( 1 pages) NoAlloc
  126. 0x3fb40000 - 0x3fb4ffff, 0 MB ( 16 pages) NoAlloc
  127. 0x3fd16000 - 0x3fd16fff, 0 MB ( 1 pages) NoAlloc NoDump
  128. 0x40000000 - 0x40230fff, 2 MB ( 561 pages) NoAlloc
  129. Found 4 CPUs in the device tree
  130. Copyright (c) 1992-2025 The FreeBSD Project.
  131. Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
  132. The Regents of the University of California. All rights reserved.
  133. FreeBSD is a registered trademark of The FreeBSD Foundation.
  134. FreeBSD 15.0-CURRENT #0 main-n276978-75d173a84836: Sun Sep 28 22:47:05 PDT 2025
  135. root@pickelbook:/usr/obj/usr/src/arm64.aarch64/sys/RPI5-UBOOT arm64
  136. FreeBSD clang version 19.1.7 (https://github.com/llvm/llvm-project.git llvmorg-19.1.7-0-gcd708029e0b2)
  137. WARNING: WITNESS option enabled, expect reduced performance.
  138. VT: init without driver.
  139. Preloaded elf kernel "/boot/kernel/kernel" at 0xffff0000011c1000.
  140. Preloaded boot_entropy_cache "/boot/entropy" at 0xffff0000011ca310.
  141. Preloaded hostuuid "/etc/hostid" at 0xffff0000011ca368.
  142. Preloaded elf module "/boot/kernel/umodem.ko" at 0xffff0000011ca3b8.
  143. Preloaded elf module "/boot/kernel/ucom.ko" at 0xffff0000011cabd0.
  144. Preloaded boot_entropy_platform "efi_rng_seed" at 0xffff0000011cb428.
  145. Preloaded TSLOG data "TSLOG" at 0xffff0000011cb480.
  146. real memory = 8585216000 (8187 MB)
  147. Physical memory chunk(s):
  148. 0x00000000080000 - 0x000000365fffff, 911736832 bytes (222592 pages)
  149. 0x000000377cf000 - 0x0000003e6eefff, 116523008 bytes (28448 pages)
  150. 0x0000003e705000 - 0x0000003e705fff, 4096 bytes (1 pages)
  151. 0x0000003e707000 - 0x0000003e707fff, 4096 bytes (1 pages)
  152. 0x0000003e72a000 - 0x0000003f74bfff, 16916480 bytes (4130 pages)
  153. 0x0000003f74d000 - 0x0000003fb3ffff, 4141056 bytes (1011 pages)
  154. 0x0000003fb50000 - 0x0000003fbfffff, 720896 bytes (176 pages)
  155. 0x00000040231000 - 0x000001f327ffff, 7298412544 bytes (1781839 pages)
  156. avail memory = 8344625152 (7958 MB)
  157. Starting CPU 1 (100)
  158. Starting CPU 2 (200)
  159. Starting CPU 3 (300)
  160. FreeBSD/SMP: Multiprocessor System Detected: 4 CPUs
  161. Enabling IDC ICache sync
  162. Enabling LSE atomics in the kernel
  163. random: read 4096 bytes from preloaded cache
  164. random: read 2048 bytes from platform bootloader
  165. random: unblocking device.
  166. VIMAGE (virtualized network stack) enabled
  167. hostuuid: using 00d04170-0000-0000-bf0d-f54007f3d326
  168. ULE: setup cpu 0
  169. ULE: setup cpu 1
  170. ULE: setup cpu 2
  171. ULE: setup cpu 3
  172. random: entropy device external interface
  173. MAP 3e706000 mode 2 pages 1
  174. MAP 3e708000 mode 2 pages 34
  175. MAP 3f74c000 mode 2 pages 1
  176. MAP 3fb40000 mode 2 pages 16
  177. MAP 107d200000 mode 4 pages 1
  178. kbd0 at kbdmux0
  179. mem: <memory>
  180. null: <full device, null device, zero device>
  181. openfirm: <Open Firmware control device>
  182. sound_global_init: snd_unit=-1 snd_vchans_enable=1 latency=2 feeder_rate_min=1 feeder_rate_max=2016000 feeder_rate_round=25
  183. tcp_log: tcp_log device
  184. crypto: <crypto core>
  185. ram0: reserving memory region: 80000-36600000
  186. ram0: reserving memory region: 377cf000-3e6ef000
  187. ram0: reserving memory region: 3e705000-3e706000
  188. ram0: reserving memory region: 3e707000-3e708000
  189. ram0: reserving memory region: 3e72a000-3f74c000
  190. ram0: reserving memory region: 3f74d000-3fb40000
  191. ram0: reserving memory region: 3fb50000-3fc00000
  192. ram0: reserving memory region: 40231000-200000000
  193. ofwbus0: <Open Firmware Device Tree>
  194. clk_fixed0: <Fixed clock> on ofwbus0
  195. Clock: 27MHz-clock, parent: none, freq: 27000000
  196. clk_fixed1: <Fixed clock> on ofwbus0
  197. Clock: 108MHz-clock, parent: none, freq: 108000000
  198. simplebus0: <Flattened device tree simple bus> on ofwbus0
  199. regfix0: <Fixed Regulator> on simplebus0
  200. regfix1: <Fixed Regulator> on simplebus0
  201. simplebus1: <Flattened device tree simple bus> on ofwbus0
  202. simplebus1: Malformed reg property on <vc_mem>
  203. ofw_clkbus0: <OFW clocks bus> on ofwbus0
  204. clk_fixed2: <Fixed clock> on ofw_clkbus0
  205. Clock: osc, parent: none, freq: 54000000
  206. clk_fixed3: <Fixed clock> on ofw_clkbus0
  207. Clock: otg, parent: none, freq: 480000000
  208. clk_fixed4: <Fixed clock> on ofw_clkbus0
  209. Clock: vpu-clock, parent: none, freq: 750000000
  210. clk_fixed5: <Fixed clock> on ofw_clkbus0
  211. Clock: uart-clock, parent: none, freq: 44236800
  212. clk_fixed6: <Fixed clock> on ofw_clkbus0
  213. Clock: emmc2-clock, parent: none, freq: 54000000
  214. clk_fixed7: <Fixed clock> on ofw_clkbus0
  215. Clock: xosc, parent: none, freq: 50000000
  216. clk_fixed8: <Fixed clock> on ofw_clkbus0
  217. Clock: pclk, parent: none, freq: 200000000
  218. clk_fixed9: <Fixed clock> on ofw_clkbus0
  219. Clock: hclk, parent: none, freq: 200000000
  220. clk_fixed10: <Fixed clock> on ofw_clkbus0
  221. Clock: src, parent: none, freq: 1000000000
  222. clk_fixed11: <Fixed clock> on ofw_clkbus0
  223. Clock: core, parent: none, freq: 50000000
  224. clk_fixed12: <Fixed clock> on ofw_clkbus0
  225. Clock: clksrc_mipi0_dsi_byteclk, parent: none, freq: 72000000
  226. clk_fixed13: <Fixed clock> on ofw_clkbus0
  227. Clock: clksrc_mipi1_dsi_byteclk, parent: none, freq: 72000000
  228. regfix2: <Fixed Regulator> on ofwbus0
  229. regfix3: <Fixed Regulator> on ofwbus0
  230. clk_fixed14: clock-fixed has no clock-frequency
  231. clk_fixed14: clock-fixed has no clock-frequency
  232. regfix4: <Fixed Regulator> on ofwbus0
  233. regfix5: <Fixed Regulator> on ofwbus0
  234. regfix6: <Fixed Regulator> on ofwbus0
  235. regfix7: <Fixed Regulator> on ofwbus0
  236. simple_mfd0: <Simple MFD (Multi-Functions Device)> mem 0x7d542000-0x7d542eff on simplebus0
  237. bcm2835_firmware0: <BCM2835 Firmware> on simplebus0
  238. ofw_clkbus1: <OFW clocks bus> on bcm2835_firmware0
  239. simple_mfd1: <Simple MFD (Multi-Functions Device)> mem 0x1000400018-0x100040002f on simplebus1
  240. clk_fixed14: clock-fixed has no clock-frequency
  241. clk_fixed14: clock-fixed has no clock-frequency
  242. psci0: <ARM Power State Co-ordination Interface Driver> on ofwbus0
  243. psci0: PSCI version 0.2 compatible
  244. Found SMCCC version 1.2
  245. smccc0: <ARM SMCCC v1.2> on psci0
  246. clk_fixed14: clock-fixed has no clock-frequency
  247. clk_fixed14: clock-fixed has no clock-frequency
  248. clk_fixed14: clock-fixed has no clock-frequency
  249. clk_fixed14: clock-fixed has no clock-frequency
  250. gic0: <ARM Generic Interrupt Controller> mem 0x107fff9000-0x107fff9fff,0x107fffa000-0x107fffbfff,0x107fffc000-0x107fffdfff,0x107fffe000-0x107fffffff irq 92 on simplebus1
  251. gic0: pn 0x2, arch 0x2, rev 0x1, implementer 0x43b irqs 320
  252. clk_fixed14: clock-fixed has no clock-frequency
  253. clk_fixed14: clock-fixed has no clock-frequency
  254. clk_fixed14: clock-fixed has no clock-frequency
  255. clk_fixed14: clock-fixed has no clock-frequency
  256. mbox0: <BCM2835 VideoCore Mailbox> mem 0x7c013880-0x7c0138bf irq 16 on simplebus0
  257. gpioregulator0: <GPIO controlled regulator> on ofwbus0
  258. gpioregulator0: cannot get pin 0
  259. gpioregulator0: cannot parse parameters
  260. device_attach: gpioregulator0 attach returned 6
  261. clk_fixed14: clock-fixed has no clock-frequency
  262. clk_fixed14: clock-fixed has no clock-frequency
  263. generic_timer0: <ARMv8 Generic Timer> irq 7,8,9,10 on ofwbus0
  264. generic_timer0: allocated irq for 'sec-phys'
  265. generic_timer0: allocated irq for 'phys'
  266. generic_timer0: allocated irq for 'virt'
  267. generic_timer0: allocated irq for 'hyp-phys'
  268. ofwbus0: no default resources for rid = 4, type = 1
  269. generic_timer0: could not allocate irq for optional interrupt 'hyp-virt'
  270. Timecounter "ARM MPCore Timecounter" frequency 54000000 Hz quality 1000
  271. Event timer "ARM MPCore Eventtimer" frequency 54000000 Hz quality 1000
  272. gpioregulator0: <GPIO controlled regulator> on ofwbus0
  273. gpioregulator0: cannot get pin 0
  274. gpioregulator0: cannot parse parameters
  275. device_attach: gpioregulator0 attach returned 6
  276. clk_fixed14: clock-fixed has no clock-frequency
  277. clk_fixed14: clock-fixed has no clock-frequency
  278. gpioregulator0: <GPIO controlled regulator> on ofwbus0
  279. gpioregulator0: cannot get pin 0
  280. gpioregulator0: cannot parse parameters
  281. device_attach: gpioregulator0 attach returned 6
  282. clk_fixed14: clock-fixed has no clock-frequency
  283. clk_fixed14: clock-fixed has no clock-frequency
  284. usb_nop_xceiv0: <USB NOP PHY> on ofwbus0
  285. gpioregulator0: <GPIO controlled regulator> on ofwbus0
  286. gpioregulator0: cannot get pin 0
  287. gpioregulator0: cannot parse parameters
  288. device_attach: gpioregulator0 attach returned 6
  289. clk_fixed14: clock-fixed has no clock-frequency
  290. clk_fixed14: clock-fixed has no clock-frequency
  291. efirtc0: cannot read EFI realtime clock, error 78
  292. smbios0: <System Management BIOS>
  293. smbios0: Entry point: v3 (64-bit), Version: 3.7
  294. smbios0: Docrev: 0, Entry Point Revision: 1
  295. ofwbus0: <framebuffer> disabled compat simple-framebuffer (no driver attached)
  296. ofwbus0: <hvs@107c580000> mem 0x107c580000-0x107c599fff irq 0,1,2 disabled compat brcm,bcm2712-hvs (no driver attached)
  297. simplebus0: <timer@7c003000> mem 0x7c003000-0x7c003fff irq 11,12,13,14 compat brcm,bcm2835-system-timer (no driver attached)
  298. simplebus0: <firmwarekms@7d503000> mem 0x7d503000-0x7d503017 irq 15 disabled compat raspberrypi,rpi-firmware-kms-2712 (no driver attached)
  299. simplebus0: <pixelvalve@7c410000> mem 0x7c410000-0x7c4100ff irq 17 disabled compat brcm,bcm2712-pixelvalve0 (no driver attached)
  300. simplebus0: <pixelvalve@7c411000> mem 0x7c411000-0x7c4110ff irq 18 disabled compat brcm,bcm2712-pixelvalve1 (no driver attached)
  301. simplebus0: <mop@7c500000> mem 0x7c500000-0x7c500027 irq 19 disabled compat brcm,bcm2712-mop (no driver attached)
  302. simplebus0: <moplet@7c501000> mem 0x7c501000-0x7c50101f irq 20 disabled compat brcm,bcm2712-moplet (no driver attached)
  303. simplebus0: <interrupt-controller@7c502000> mem 0x7c502000-0x7c50202f irq 21 disabled compat brcm,bcm2711-l2-intc (no driver attached)
  304. simplebus0: <clock@7c700000> mem 0x7c700000-0x7c70000f compat brcm,brcm2711-dvp (no driver attached)
  305. simplebus0: <local_intc@7cd00000> mem 0x7cd00000-0x7cd000ff compat brcm,bcm2836-l1-intc (no driver attached)
  306. simplebus0: no default resources for rid = 0, type = 4
  307. uart0: <PrimeCell UART (PL011)> mem 0x7d001000-0x7d0011ff irq 22 on simplebus0
  308. uart0: console (115200,n,8,1)
  309. uart0: fast interrupt
  310. uart0: PPS capture mode: DCD
  311. simplebus0: <serial@7d001400> mem 0x7d001400-0x7d0015ff irq 23 disabled compat arm,pl011 (no driver attached)
  312. simplebus0: <serial@7d001600> mem 0x7d001600-0x7d0017ff irq 24 disabled compat arm,pl011 (no driver attached)
  313. simplebus0: <serial@7d001800> mem 0x7d001800-0x7d0019ff irq 25 disabled compat arm,pl011 (no driver attached)
  314. simplebus0: <serial@7d001a00> mem 0x7d001a00-0x7d001bff irq 26 disabled compat arm,pl011 (no driver attached)
  315. simplebus0: <mmc@7d002000> mem 0x7d002000-0x7d0020ff disabled compat brcm,bcm2835-sdhost (no driver attached)
  316. simplebus0: <_i2s@7d003000> mem 0x7d003000-0x7d003023 disabled compat brcm,bcm2835-i2s (no driver attached)
  317. spi0: <BCM2708/2835 SPI controller> mem 0x7d004000-0x7d0041ff irq 27 on simplebus0
  318. spibus0: <OFW SPI bus> on spi0
  319. spibus0: <unknown card> at cs 0 mode 0
  320. simplebus0: <spi@7d004600> mem 0x7d004600-0x7d0047ff irq 28 disabled compat brcm,bcm2835-spi (no driver attached)
  321. simplebus0: <spi@7d004800> mem 0x7d004800-0x7d0049ff irq 29 disabled compat brcm,bcm2835-spi (no driver attached)
  322. simplebus0: <spi@7d004a00> mem 0x7d004a00-0x7d004bff irq 30 disabled compat brcm,bcm2835-spi (no driver attached)
  323. simplebus0: <spi@7d004c00> mem 0x7d004c00-0x7d004dff irq 31 disabled compat brcm,bcm2835-spi (no driver attached)
  324. simplebus0: <i2c@7d005000> mem 0x7d005000-0x7d00501f irq 32 disabled compat brcm,bcm2711-i2c (no driver attached)
  325. simplebus0: <i2c@7d005600> mem 0x7d005600-0x7d00561f irq 33 disabled compat brcm,bcm2711-i2c (no driver attached)
  326. simplebus0: <i2c@7d005800> mem 0x7d005800-0x7d00581f irq 34 disabled compat brcm,bcm2711-i2c (no driver attached)
  327. simplebus0: <i2c@7d005a00> mem 0x7d005a00-0x7d005a1f irq 35 disabled compat brcm,bcm2711-i2c (no driver attached)
  328. simplebus0: <i2c@7d005c00> mem 0x7d005c00-0x7d005c1f irq 36 disabled compat brcm,bcm2711-i2c (no driver attached)
  329. simplebus0: <i2c@7d005e00> mem 0x7d005e00-0x7d005e1f irq 37 disabled compat brcm,bcm2711-i2c (no driver attached)
  330. simplebus0: <pwm@7d00c000> mem 0x7d00c000-0x7d00c027 disabled compat brcm,bcm2835-pwm (no driver attached)
  331. simplebus0: <pwm@7d00c800> mem 0x7d00c800-0x7d00c827 disabled compat brcm,bcm2835-pwm (no driver attached)
  332. simplebus0: <watchdog@7d200000> mem 0x7d200000-0x7d200307 compat brcm,bcm2712-pm (no driver attached)
  333. simplebus0: <cprman@7d202000> mem 0x7d202000-0x7d203fff disabled compat brcm,bcm2711-cprman (no driver attached)
  334. bcmrng0: <Broadcom BCM2835/BCM2838 RNG> mem 0x7d208000-0x7d208027 on simplebus0
  335. bcmrng0: simplebus0: <intc@7d503000> mem 0x7d503000-0x7d503017 irq 38 compat brcm,l2-intc (no driver attached)
  336. simplebus0: <pinctrl@7d504100> mem 0x7d504100-0x7d50412f compat brcm,bcm2712-pinctrl (no driver attached)
  337. simplebus0: <i2c@7d508200> mem 0x7d508200-0x7d508257 irq 39 disabled compat brcm,brcmstb-i2c (no driver attached)
  338. simplebus0: <i2c@7d508280> mem 0x7d508280-0x7d5082d7 irq 40 disabled compat brcm,brcmstb-i2c (no driver attached)
  339. simplebus0: <i2c@7d508300> mem 0x7d508300-0x7d508357 irq 41 disabled compat brcm,brcmstb-i2c (no driver attached)
  340. simplebus0: <intc@7d508380> mem 0x7d508380-0x7d50838f irq 42 compat brcm,bcm7271-l2-intc (no driver attached)
  341. simplebus0: <intc@7d508400> mem 0x7d508400-0x7d50840f irq 43 compat brcm,bcm7271-l2-intc (no driver attached)
  342. simplebus0: <gpio@7d508500> mem 0x7d508500-0x7d50853f irq 44 compat brcm,brcmstb-gpio (no driver attached)
  343. simplebus0: <serial@7d50c000> mem 0x7d50c000-0x7d50c01f irq 45 compat brcm,bcm7271-uart (no driver attached)
  344. simplebus0: <serial@7d50d000> mem 0x7d50d000-0x7d50d01f irq 46 disabled compat brcm,bcm7271-uart (no driver attached)
  345. simplebus0: <serial@7d50e000> mem 0x7d50e000-0x7d50e01f irq 47 disabled compat brcm,bcm7271-uart (no driver attached)
  346. simplebus0: <interrupt-controller@7d510600> mem 0x7d510600-0x7d51062f irq 48 disabled compat brcm,bcm2711-l2-intc (no driver attached)
  347. simplebus0: <pinctrl@7d510700> mem 0x7d510700-0x7d51071f compat brcm,bcm2712-aon-pinctrl (no driver attached)
  348. simplebus0: <intc@7d517000> mem 0x7d517000-0x7d51700f irq 49 disabled compat brcm,bcm7271-l2-intc (no driver attached)
  349. simplebus0: <i2c@7d517a00> mem 0x7d517a00-0x7d517a57 irq 50 disabled compat brcm,brcmstb-i2c (no driver attached)
  350. simplebus0: <pwm@7d517a80> mem 0x7d517a80-0x7d517aa7 compat brcm,bcm7038-pwm (no driver attached)
  351. simplebus0: <intc@7d517ac0> mem 0x7d517ac0-0x7d517acf irq 51 disabled compat brcm,bcm7271-l2-intc (no driver attached)
  352. simplebus0: <intc@7d517b00> mem 0x7d517b00-0x7d517b0f irq 52 compat brcm,bcm7271-l2-intc (no driver attached)
  353. simplebus0: <gpio@7d517c00> mem 0x7d517c00-0x7d517c3f irq 53 compat brcm,brcmstb-gpio (no driver attached)
  354. simple_mfd0: <thermal> mem 0x7d542000-0x7d542eff compat brcm,bcm2711-thermal (no driver attached)
  355. simplebus0: <i2c@7d544000> mem 0x7d544000-0x7d544057 irq 54 disabled compat brcm,brcmstb-i2c (no driver attached)
  356. simplebus0: <hdmi@7ef00700> mem 0x7c701400-0x7c7016ff,0x7c701000-0x7c7011ff,0x7c701d00-0x7c701fff,0x7c702000-0x7c70207f,0x7c703800-0x7c7039ff,0x7c704000-0x7c7047ff,0x7c700100-0x7c70017f,0x7d510800-0x7d5108ff,0x7c720000-0x7c7200ff irq 55,56,57,58,59 disabled compat brcm,bcm2712-hdmi0 (no driver attached)
  357. simplebus0: <hdmi@7ef05700> mem 0x7c706400-0x7c7066ff,0x7c706000-0x7c7061ff,0x7c706d00-0x7c706fff,0x7c707000-0x7c70707f,0x7c708800-0x7c7089ff,0x7c709000-0x7c7097ff,0x7c700180-0x7c7001ff,0x7d511000-0x7d5110ff,0x7c720000-0x7c7200ff irq 60,61,62,63,64 disabled compat brcm,bcm2712-hdmi1 (no driver attached)
  358. bcm2835_firmware0: <reset> compat raspberrypi,firmware-reset (no driver attached)
  359. bcm2835_firmware0: <vcio> compat raspberrypi,vcio (no driver attached)
  360. simplebus0: <power> compat raspberrypi,bcm2835-power (no driver attached)
  361. fb0: <BCM2835 VT framebuffer driver> on simplebus0
  362. Checking root against raspberrypi,model-b
  363. Checking root against brcm,bcm2835
  364. Checking root against brcm,bcm2709
  365. Checking root against brcm,bcm2836
  366. Checking root against brcm,bcm2837
  367. Checking root against brcm,bcm2711
  368. Checking root against brcm,bcm2838
  369. panic: No suitable SOC memory configuration found.
  370. cpuid = 0
  371. time = 1
  372. KDB: stack backtrace:
  373. db_trace_self() at db_trace_self
  374. db_trace_self_wrapper() at db_trace_self_wrapper+0x38
  375. vpanic() at vpanic+0x1a0
  376. panic() at panic+0x48
  377. bcm283x_get_current_memcfg() at bcm283x_get_current_memcfg+0x1f8
  378. bcm283x_dmabus_peripheral_lowaddr() at bcm283x_dmabus_peripheral_lowaddr+0xc
  379. bcm2835_mbox_property() at bcm2835_mbox_property+0x6c
  380. bcm2835_mbox_fb_get_w_h() at bcm2835_mbox_fb_get_w_h+0x40
  381. bcm_fb_init() at bcm_fb_init+0x2c
  382. bcm_fb_attach() at bcm_fb_attach+0x164
  383. device_attach() at device_attach+0x4c0
  384. bus_generic_new_pass() at bus_generic_new_pass+0x130
  385. bus_generic_new_pass() at bus_generic_new_pass+0xc0
  386. bus_generic_new_pass() at bus_generic_new_pass+0xc0
  387. bus_generic_new_pass() at bus_generic_new_pass+0xc0
  388. root_bus_configure() at root_bus_configure+0x44
  389. mi_startup() at mi_startup+0x1f4
  390. virtdone() at virtdone+0x74
  391. KDB: enter: panic
  392. [ thread pid 0 tid 100000 ]
  393. Stopped at kdb_enter+0x48: str xzr, [x19, #384]
  394. db>
Tags: uboot Debugging DeviceTree freebrd
Add Comment
Please, Sign In to add comment
Public Pastes
We use cookies for various purposes including analytics. By continuing to use Pastebin, you agree to our use of cookies as described in the Cookies Policy.  OK, I Understand
Not a member of Pastebin yet?
Sign Up, it unlocks many cool features!