Advertisement
Not a member of Pastebin yet?
Sign Up,
it unlocks many cool features!
- [MiSTer]
- recents=1
- browse_expand=1
- key_menu_as_rgui=0 ; set to 1 to make the MENU key map to RGUI in Minimig (e.g. for Right Amiga)
- forced_scandoubler=0 ; set to 1 to run scandoubler on VGA output always (depends on core).
- ypbpr=0 ; set to 1 for YPbPr on VGA output.
- composite_sync=0 ; set to 1 for composite sync on HSync signal of VGA output.
- vga_scaler=0 ; set to 1 to connect VGA to scaler output.
- hdmi_audio_96k=0 ; set to 1 for 96khz/16bit HDMI audio (48khz/16bit otherwise)
- keyrah_mode=0x18d80002 ; VIDPID of keyrah for special code translation (0x23418037 for Arduino Micro)
- volumectl=0 ; enable audio volume control by multimedia keys
- vscale_mode=1 ; 0 - scale to fit the screen height.
- ; 1 - use integer scale only.
- ; 2 - use 0.5 steps of scale.
- ; 3 - use 0.25 steps of scale.
- vscale_border=0 ; set vertical border for TVs cutting the upper/bottom parts of screen (1-399)
- bootscreen=1 ; uncomment to disable boot screen of some cores like Minimig.
- ;mouse_throttle=10 ; 1-100 mouse speed divider. Useful for very sensitive mice
- rbf_hide_datecode=0 ; 1 - hides datecodes from rbf file names. Press F2 for quick temporary toggle
- menu_pal=0 ; 1 - PAL mode for menu core
- hdmi_limited=1
- ; 1 - use limited (16..235) color range over HDMI
- ; 2 - use limited (16..255) color range over HDMI, for VGA converters.
- direct_video=0 ; 1 - enable core video timing over HDMI, use only with VGA converters.
- fb_size=0 ; 0 - automatic, 1 - full size, 2 - 1/2 of resolution, 4 - 1/4 of resolution.
- fb_terminal=1 ; 1 - enabled (default), 0 - disabled
- osd_timeout=30 ; 5-3600 timeout (in seconds) for OSD to disappear in Menu core. 30 seconds if not set.
- ; Background picture will get darker after double timout
- ; lastcore - Autoboot the last loaded core (corename autosaved in CONFIG/lastcore.dat) first found on the SD/USB
- ; lastexactcore - Autoboot the last loaded exact core (corename_yyyymmdd.rbf autosaved in CONFIG/lastcore.dat) first found on the SD/USB
- ; corename - Autoboot first corename_*.rbf found on the SD/USB
- ; corename_yyyymmdd.rbf - Autoboot first corename_yyyymmdd.rbf found on the SD/USB
- ;bootcore=lastcore ; uncomment to autoboot a core, as the last loaded core.
- bootcore_timeout=10 ; 10-30 timeout before autoboot, comment for autoboot without timeout.
- ; Option to load the custom font. Format is plain bitmap 8x8.
- ; Supported sizes of font:
- ; 768 bytes - chars 32-127 (only alpha + numeric)
- ; 1024 bytes - chars 0-127
- ; 1136 bytes - chars 0-141
- ; up to 2048 - only chars 0-141 will be used.
- ; if first 32 chars are empty (for sizes 1024 bytes and more) then they are skipped.
- font=font/myfont.pf
- ; USER button emulation by keybaord. Usually it's reset button.
- ; 0 - lctrl+lalt+ralt (lctrl+lgui+rgui on keyrah)
- ; 1 - lctrl+lgui+rgui
- ; 2 - lctrl+lalt+del
- ; 3 - same as 0 (lctrl+lalt+ralt on keyrah)
- reset_combo=0
- dvi_mode=0 ; set to 1 for DVI mode. Audio won't be transmitted through HDMI in DVI mode.
- ; 0 - 1280x720@60
- ; 1 - 1024x768@60
- ; 2 - 720x480@60
- ; 3 - 720x576@50
- ; 4 - 1280x1024@60
- ; 5 - 800x600@60
- ; 6 - 640x480@60
- ; 7 - 1280x720@50
- ; 8 - 1920x1080@60
- ; 9 - 1920x1080@50
- ;10 - 1366x768@60
- ;11 - 1024x600@60
- ;
- ; custom mode: hact,hfp,hs,hbp,vact,vfp,vs,vbp,Fpix_in_KHz
- ; video_mode=1280,110,40,220,720,5,5,20,74250
- video_mode=13
- ;video_mode=1920,48,32,80,1200,3,6,26,154128video_mode=1920,48,32,80,1200,3,6,26,154128 ;1920x1220 @60hz
- ;video_mode=1920,48,32,112,1200,3,6,32,154000
- ;video_mode=1600,48,32,112,1200,3,4,32,130250
- ;video_mode=752,64,80,144,2160,1,3,71,139460
- ;video_mode=320,48,32,80,240,3,6,26,154128
- ;video_mode=2048,40,442,200,240,3,10,8,85909 ;240p
- ; set to 1-10 (seconds) to display video info on startup/change
- video_info=1
- ; Set to 1 for automatic HDMI VSync rate adjust to match original VSync.
- ; Set to 2 for low latency mode (single buffer).
- ; This option makes video butter smooth like on original emulated system.
- ; Adjusting is done by changing pixel clock. Not every display supports variable pixel clock.
- ; For proper adjusting and to reduce possible out of range pixel clock, use 60Hz HDMI video
- ; modes as a base even for 50Hz systems.
- vsync_adjust=2
- ; These parameters have the same format as video_mode.
- ; You need to supply both PAL and NTSC modes if you want vsync_adjust to switch between
- ; predefined modes as a base. This will reduce the range of pixel clock.
- ;video_mode_ntsc=8
- ;video_mode_pal=9
- ;video_mode_ntsc=1920,48,32,80,1200,3,6,26,154128 ;1920x1220 @60hz
- ;video_mode_pal=1920,48,32,80,1200,3,6,26,128440 ;1920x1220 @50hz
- ;video_mode_ntsc=2
- ;video_mode_pal=3
- [GBA]
- ;video_mode=2
- ;video_mode=320,8,32,24,240,4,3,16,6048
- ;vga_scaler=1
- vsync_adjust=2
- ;vscale_mode=1
- ;video_mode=0
- direct_video=0 ; 1 - enable core video timing over HDMI, use only with VGA converters.
- hdmi_limited=0
- ;[menu]
- vga_scaler=1
- ;[NeoGeo]
- vscale_border=1
- ;[gameboy]
- video_mode=320,8,32,24,240,4,3,16,6048 ;Set 10:9 aspect integer scaling
- vsync_adjust=0
- vga_scaler=1
- vscale_mode=1
Advertisement
Add Comment
Please, Sign In to add comment
Advertisement