API tools faq
paste
Guest User

WD Gold

a guest
Sep 30th, 2025
8
0
Never
Add comment
Not a member of Pastebin yet? Sign Up, it unlocks many cool features!
text 9.44 KB | None | 0 0
raw download clone embed print report
  1.  
  2. === START OF INFORMATION SECTION ===
  3. Model Family: Western Digital Gold
  4. Device Model: WDC WD121KRYZ-01W0RB0
  5. Serial Number: 8DH6MUAH
  6. LU WWN Device Id: 5 000cca 253d11c1f
  7. Firmware Version: 01.01H01
  8. User Capacity: 12,000,138,625,024 bytes [12.0 TB]
  9. Sector Sizes: 512 bytes logical, 4096 bytes physical
  10. Rotation Rate: 7200 rpm
  11. Form Factor: 3.5 inches
  12. Device is: In smartctl database 7.3/5528
  13. ATA Version is: ACS-2, ATA8-ACS T13/1699-D revision 4
  14. SATA Version is: SATA 3.2, 6.0 Gb/s (current: 6.0 Gb/s)
  15. Local Time is: Tue Sep 30 19:28:41 2025 UTC
  16. SMART support is: Available - device has SMART capability.
  17. SMART support is: Enabled
  18.  
  19. === START OF READ SMART DATA SECTION ===
  20. SMART overall-health self-assessment test result: PASSED
  21.  
  22. General SMART Values:
  23. Offline data collection status: (0x82) Offline data collection activity
  24. was completed without error.
  25. Auto Offline Data Collection: Enabled.
  26. Self-test execution status: ( 0) The previous self-test routine completed
  27. without error or no self-test has ever
  28. been run.
  29. Total time to complete Offline
  30. data collection: ( 87) seconds.
  31. Offline data collection
  32. capabilities: (0x5b) SMART execute Offline immediate.
  33. Auto Offline data collection on/off support.
  34. Suspend Offline collection upon new
  35. command.
  36. Offline surface scan supported.
  37. Self-test supported.
  38. No Conveyance Self-test supported.
  39. Selective Self-test supported.
  40. SMART capabilities: (0x0003) Saves SMART data before entering
  41. power-saving mode.
  42. Supports SMART auto save timer.
  43. Error logging capability: (0x01) Error logging supported.
  44. General Purpose Logging supported.
  45. Short self-test routine
  46. recommended polling time: ( 2) minutes.
  47. Extended self-test routine
  48. recommended polling time: (1248) minutes.
  49. SCT capabilities: (0x003d) SCT Status supported.
  50. SCT Error Recovery Control supported.
  51. SCT Feature Control supported.
  52. SCT Data Table supported.
  53.  
  54. SMART Attributes Data Structure revision number: 16
  55. Vendor Specific SMART Attributes with Thresholds:
  56. ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE
  57. 1 Raw_Read_Error_Rate 0x000b 100 100 016 Pre-fail Always - 0
  58. 2 Throughput_Performance 0x0005 132 132 054 Pre-fail Offline - 96
  59. 3 Spin_Up_Time 0x0007 176 176 024 Pre-fail Always - 396 (Average 354)
  60. 4 Start_Stop_Count 0x0012 100 100 000 Old_age Always - 274
  61. 5 Reallocated_Sector_Ct 0x0033 100 100 005 Pre-fail Always - 1
  62. 7 Seek_Error_Rate 0x000b 100 100 067 Pre-fail Always - 0
  63. 8 Seek_Time_Performance 0x0005 128 128 020 Pre-fail Offline - 18
  64. 9 Power_On_Hours 0x0012 093 093 000 Old_age Always - 50951
  65. 10 Spin_Retry_Count 0x0013 100 100 060 Pre-fail Always - 0
  66. 12 Power_Cycle_Count 0x0032 100 100 000 Old_age Always - 127
  67. 22 Helium_Level 0x0023 100 100 025 Pre-fail Always - 100
  68. 192 Power-Off_Retract_Count 0x0032 098 098 000 Old_age Always - 3335
  69. 193 Load_Cycle_Count 0x0012 098 098 000 Old_age Always - 3335
  70. 194 Temperature_Celsius 0x0002 139 139 000 Old_age Always - 43 (Min/Max 22/50)
  71. 196 Reallocated_Event_Count 0x0032 100 100 000 Old_age Always - 1
  72. 197 Current_Pending_Sector 0x0022 100 100 000 Old_age Always - 0
  73. 198 Offline_Uncorrectable 0x0008 100 100 000 Old_age Offline - 256
  74. 199 UDMA_CRC_Error_Count 0x000a 200 200 000 Old_age Always - 0
  75.  
  76. SMART Error Log Version: 1
  77. ATA Error Count: 9125 (device log contains only the most recent five errors)
  78. CR = Command Register [HEX]
  79. FR = Features Register [HEX]
  80. SC = Sector Count Register [HEX]
  81. SN = Sector Number Register [HEX]
  82. CL = Cylinder Low Register [HEX]
  83. CH = Cylinder High Register [HEX]
  84. DH = Device/Head Register [HEX]
  85. DC = Device Command Register [HEX]
  86. ER = Error register [HEX]
  87. ST = Status register [HEX]
  88. Powered_Up_Time is measured from power on, and printed as
  89. DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes,
  90. SS=sec, and sss=millisec. It "wraps" after 49.710 days.
  91.  
  92. Error 9125 occurred at disk power-on lifetime: 50357 hours (2098 days + 5 hours)
  93. When the command that caused the error occurred, the device was doing SMART Offline or Self-test.
  94.  
  95. After command completion occurred, registers were:
  96. ER ST SC SN CL CH DH
  97. -- -- -- -- -- -- --
  98. 40 41 00 00 00 00 00 Error: UNC at LBA = 0x00000000 = 0
  99.  
  100. Commands leading to the command that caused the error were:
  101. CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
  102. -- -- -- -- -- -- -- -- ---------------- --------------------
  103. 60 01 f8 9f 80 6c 40 00 19:15:36.788 READ FPDMA QUEUED
  104. 2f 00 01 10 00 00 e0 00 19:15:36.462 READ LOG EXT
  105. 60 01 f0 9f 80 6c 40 00 19:15:36.461 READ FPDMA QUEUED
  106. 2f 00 01 10 00 00 e0 00 19:15:36.138 READ LOG EXT
  107. 60 01 e8 9f 80 6c 40 00 19:15:36.137 READ FPDMA QUEUED
  108.  
  109. Error 9124 occurred at disk power-on lifetime: 50357 hours (2098 days + 5 hours)
  110. When the command that caused the error occurred, the device was doing SMART Offline or Self-test.
  111.  
  112. After command completion occurred, registers were:
  113. ER ST SC SN CL CH DH
  114. -- -- -- -- -- -- --
  115. 40 41 00 00 00 00 00 Error: UNC at LBA = 0x00000000 = 0
  116.  
  117. Commands leading to the command that caused the error were:
  118. CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
  119. -- -- -- -- -- -- -- -- ---------------- --------------------
  120. 60 01 f0 9f 80 6c 40 00 19:15:36.462 READ FPDMA QUEUED
  121. 2f 00 01 10 00 00 e0 00 19:15:36.138 READ LOG EXT
  122. 60 01 e8 9f 80 6c 40 00 19:15:36.137 READ FPDMA QUEUED
  123. 61 01 e0 9e 80 6c 40 00 19:15:36.107 WRITE FPDMA QUEUED
  124. 61 01 d8 9e 80 6c 40 00 19:15:36.107 WRITE FPDMA QUEUED
  125.  
  126. Error 9123 occurred at disk power-on lifetime: 50357 hours (2098 days + 5 hours)
  127. When the command that caused the error occurred, the device was doing SMART Offline or Self-test.
  128.  
  129. After command completion occurred, registers were:
  130. ER ST SC SN CL CH DH
  131. -- -- -- -- -- -- --
  132. 40 41 00 00 00 00 00 Error: UNC at LBA = 0x00000000 = 0
  133.  
  134. Commands leading to the command that caused the error were:
  135. CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
  136. -- -- -- -- -- -- -- -- ---------------- --------------------
  137. 60 01 e8 9f 80 6c 40 00 19:15:36.137 READ FPDMA QUEUED
  138. 61 01 e0 9e 80 6c 40 00 19:15:36.107 WRITE FPDMA QUEUED
  139. 61 01 d8 9e 80 6c 40 00 19:15:36.107 WRITE FPDMA QUEUED
  140. 61 01 d0 9e 80 6c 40 00 19:15:36.106 WRITE FPDMA QUEUED
  141. 61 01 c8 9e 80 6c 40 00 19:15:36.105 WRITE FPDMA QUEUED
  142.  
  143. Error 9122 occurred at disk power-on lifetime: 50357 hours (2098 days + 5 hours)
  144. When the command that caused the error occurred, the device was doing SMART Offline or Self-test.
  145.  
  146. After command completion occurred, registers were:
  147. ER ST SC SN CL CH DH
  148. -- -- -- -- -- -- --
  149. 40 41 00 00 00 00 00 Error: UNC at LBA = 0x00000000 = 0
  150.  
  151. Commands leading to the command that caused the error were:
  152. CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
  153. -- -- -- -- -- -- -- -- ---------------- --------------------
  154. 60 01 b8 9e 80 6c 40 00 19:15:35.781 READ FPDMA QUEUED
  155. 2f 00 01 10 00 00 e0 00 19:15:35.441 READ LOG EXT
  156. 60 01 b0 9e 80 6c 40 00 19:15:35.440 READ FPDMA QUEUED
  157. 2f 00 01 10 00 00 e0 00 19:15:35.115 READ LOG EXT
  158. 60 01 a8 9e 80 6c 40 00 19:15:35.114 READ FPDMA QUEUED
  159.  
  160. Error 9121 occurred at disk power-on lifetime: 50357 hours (2098 days + 5 hours)
  161. When the command that caused the error occurred, the device was doing SMART Offline or Self-test.
  162.  
  163. After command completion occurred, registers were:
  164. ER ST SC SN CL CH DH
  165. -- -- -- -- -- -- --
  166. 40 41 00 00 00 00 00 Error: UNC at LBA = 0x00000000 = 0
  167.  
  168. Commands leading to the command that caused the error were:
  169. CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
  170. -- -- -- -- -- -- -- -- ---------------- --------------------
  171. 60 01 b0 9e 80 6c 40 00 19:15:35.441 READ FPDMA QUEUED
  172. 2f 00 01 10 00 00 e0 00 19:15:35.115 READ LOG EXT
  173. 60 01 a8 9e 80 6c 40 00 19:15:35.114 READ FPDMA QUEUED
  174. 61 01 a0 9d 80 6c 40 00 19:15:35.085 WRITE FPDMA QUEUED
  175. 61 01 98 9d 80 6c 40 00 19:15:35.084 WRITE FPDMA QUEUED
  176.  
  177. SMART Self-test log structure revision number 1
  178. Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error
  179. # 1 Short offline Completed without error 00% 50442 -
  180.  
  181. SMART Selective self-test log data structure revision number 1
  182. SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
  183. 1 0 0 Not_testing
  184. 2 0 0 Not_testing
  185. 3 0 0 Not_testing
  186. 4 0 0 Not_testing
  187. 5 0 0 Not_testing
  188. Selective self-test flags (0x0):
  189. After scanning selected spans, do NOT read-scan remainder of disk.
  190. If Selective self-test is pending on power-up, resume after 0 minute delay.
  191.  
  192. The above only provides legacy SMART information - try 'smartctl -x' for more
  193.  
Advertisement
Add Comment
Please, Sign In to add comment
Public Pastes
We use cookies for various purposes including analytics. By continuing to use Pastebin, you agree to our use of cookies as described in the Cookies Policy.  OK, I Understand
Not a member of Pastebin yet?
Sign Up, it unlocks many cool features!